[PATCH v2 0/7] Add support to the mmsys driver to be a reset controller

[PATCH v2 0/7] Add support to the mmsys driver to be a reset controller

[Enric Balletbo i Serra]

Dear all,

The following patchset is a reimplementation of the patch sent by Jitao
Shi [1] some time ago. As suggested by Chun-Kuang Hu, this time the
reset is done using the reset API, where the mmsys driver is the reset
controller and the mtk_dsi driver is the reset consumer.

Note that the first patch is kind of unrelated change, it's just a
cleanup but is needed if you want to apply all the following patches
cleanly.

This patchset is important in order to have the DSI panel working on some
kukui MT8183 Chromebooks (i.e Lenovo IdeaPad Duet). Without it, you just
get a black screen.

Best regards,
  Enric

[1] https://lore.kernel.org/linux-arm-kernel/20210420132614.150242-4-jitao.shi@mediatek.com/


Changes in v2:
- Fix build test ERROR Reported-by: kernel test robot <lkp@intel.com>
- Added a new patch to describe the dsi reset optional property.

Enric Balletbo i Serra (7):
  arm64: dts: mediatek: Move reset controller constants into common
    location
  dt-bindings: mediatek: Add #reset-cells to mmsys system controller
  dt-bindings: display: mediatek: add dsi reset optional property
  arm64: dts: mt8173: Add the mmsys reset bit to reset the dsi0
  arm64: dts: mt8183: Add the mmsys reset bit to reset the dsi0
  soc: mediatek: mmsys: Add reset controller support
  drm/mediatek: mtk_dsi: Reset the dsi0 hardware

 .../bindings/arm/mediatek/mediatek,mmsys.txt  |  2 +
 .../display/mediatek/mediatek,dsi.txt         |  6 ++
 arch/arm64/boot/dts/mediatek/mt8173.dtsi      |  2 +
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      |  5 +-
 drivers/gpu/drm/mediatek/mtk_dsi.c            |  5 +-
 drivers/soc/mediatek/mtk-mmsys.c              | 69 +++++++++++++++++++
 drivers/soc/mediatek/mtk-mmsys.h              |  2 +
 drivers/watchdog/mtk_wdt.c                    |  6 +-
 .../mt2712-resets.h                           |  0
 include/dt-bindings/reset/mt8173-resets.h     |  2 +
 .../mt8183-resets.h                           |  3 +
 .../mt8192-resets.h                           |  0
 12 files changed, 96 insertions(+), 6 deletions(-)
 rename include/dt-bindings/{reset-controller => reset}/mt2712-resets.h (100%)
 rename include/dt-bindings/{reset-controller => reset}/mt8183-resets.h (98%)
 rename include/dt-bindings/{reset-controller => reset}/mt8192-resets.h (100%)

-- 
2.30.2

[PATCH v2 0/7] Add support to the mmsys driver to be a reset controller

[Enric Balletbo i Serra]

Dear all,

The following patchset is a reimplementation of the patch sent by Jitao
Shi [1] some time ago. As suggested by Chun-Kuang Hu, this time the
reset is done using the reset API, where the mmsys driver is the reset
controller and the mtk_dsi driver is the reset consumer.

Note that the first patch is kind of unrelated change, it's just a
cleanup but is needed if you want to apply all the following patches
cleanly.

This patchset is important in order to have the DSI panel working on some
kukui MT8183 Chromebooks (i.e Lenovo IdeaPad Duet). Without it, you just
get a black screen.

Best regards,
  Enric

[1] https://lore.kernel.org/linux-arm-kernel/20210420132614.150242-4-jitao.shi@mediatek.com/


Changes in v2:
- Fix build test ERROR Reported-by: kernel test robot <lkp@intel.com>
- Added a new patch to describe the dsi reset optional property.

Enric Balletbo i Serra (7):
  arm64: dts: mediatek: Move reset controller constants into common
    location
  dt-bindings: mediatek: Add #reset-cells to mmsys system controller
  dt-bindings: display: mediatek: add dsi reset optional property
  arm64: dts: mt8173: Add the mmsys reset bit to reset the dsi0
  arm64: dts: mt8183: Add the mmsys reset bit to reset the dsi0
  soc: mediatek: mmsys: Add reset controller support
  drm/mediatek: mtk_dsi: Reset the dsi0 hardware

 .../bindings/arm/mediatek/mediatek,mmsys.txt  |  2 +
 .../display/mediatek/mediatek,dsi.txt         |  6 ++
 arch/arm64/boot/dts/mediatek/mt8173.dtsi      |  2 +
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      |  5 +-
 drivers/gpu/drm/mediatek/mtk_dsi.c            |  5 +-
 drivers/soc/mediatek/mtk-mmsys.c              | 69 +++++++++++++++++++
 drivers/soc/mediatek/mtk-mmsys.h              |  2 +
 drivers/watchdog/mtk_wdt.c                    |  6 +-
 .../mt2712-resets.h                           |  0
 include/dt-bindings/reset/mt8173-resets.h     |  2 +
 .../mt8183-resets.h                           |  3 +
 .../mt8192-resets.h                           |  0
 12 files changed, 96 insertions(+), 6 deletions(-)
 rename include/dt-bindings/{reset-controller => reset}/mt2712-resets.h (100%)
 rename include/dt-bindings/{reset-controller => reset}/mt8183-resets.h (98%)
 rename include/dt-bindings/{reset-controller => reset}/mt8192-resets.h (100%)

-- 
2.30.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 0/7] Add support to the mmsys driver to be a reset controller

[Enric Balletbo i Serra]

Dear all,

The following patchset is a reimplementation of the patch sent by Jitao
Shi [1] some time ago. As suggested by Chun-Kuang Hu, this time the
reset is done using the reset API, where the mmsys driver is the reset
controller and the mtk_dsi driver is the reset consumer.

Note that the first patch is kind of unrelated change, it's just a
cleanup but is needed if you want to apply all the following patches
cleanly.

This patchset is important in order to have the DSI panel working on some
kukui MT8183 Chromebooks (i.e Lenovo IdeaPad Duet). Without it, you just
get a black screen.

Best regards,
  Enric

[1] https://lore.kernel.org/linux-arm-kernel/20210420132614.150242-4-jitao.shi@mediatek.com/


Changes in v2:
- Fix build test ERROR Reported-by: kernel test robot <lkp@intel.com>
- Added a new patch to describe the dsi reset optional property.

Enric Balletbo i Serra (7):
  arm64: dts: mediatek: Move reset controller constants into common
    location
  dt-bindings: mediatek: Add #reset-cells to mmsys system controller
  dt-bindings: display: mediatek: add dsi reset optional property
  arm64: dts: mt8173: Add the mmsys reset bit to reset the dsi0
  arm64: dts: mt8183: Add the mmsys reset bit to reset the dsi0
  soc: mediatek: mmsys: Add reset controller support
  drm/mediatek: mtk_dsi: Reset the dsi0 hardware

 .../bindings/arm/mediatek/mediatek,mmsys.txt  |  2 +
 .../display/mediatek/mediatek,dsi.txt         |  6 ++
 arch/arm64/boot/dts/mediatek/mt8173.dtsi      |  2 +
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      |  5 +-
 drivers/gpu/drm/mediatek/mtk_dsi.c            |  5 +-
 drivers/soc/mediatek/mtk-mmsys.c              | 69 +++++++++++++++++++
 drivers/soc/mediatek/mtk-mmsys.h              |  2 +
 drivers/watchdog/mtk_wdt.c                    |  6 +-
 .../mt2712-resets.h                           |  0
 include/dt-bindings/reset/mt8173-resets.h     |  2 +
 .../mt8183-resets.h                           |  3 +
 .../mt8192-resets.h                           |  0
 12 files changed, 96 insertions(+), 6 deletions(-)
 rename include/dt-bindings/{reset-controller => reset}/mt2712-resets.h (100%)
 rename include/dt-bindings/{reset-controller => reset}/mt8183-resets.h (98%)
 rename include/dt-bindings/{reset-controller => reset}/mt8192-resets.h (100%)

-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 0/7] Add support to the mmsys driver to be a reset controller

[Enric Balletbo i Serra]

Dear all,

The following patchset is a reimplementation of the patch sent by Jitao
Shi [1] some time ago. As suggested by Chun-Kuang Hu, this time the
reset is done using the reset API, where the mmsys driver is the reset
controller and the mtk_dsi driver is the reset consumer.

Note that the first patch is kind of unrelated change, it's just a
cleanup but is needed if you want to apply all the following patches
cleanly.

This patchset is important in order to have the DSI panel working on some
kukui MT8183 Chromebooks (i.e Lenovo IdeaPad Duet). Without it, you just
get a black screen.

Best regards,
  Enric

[1] https://lore.kernel.org/linux-arm-kernel/20210420132614.150242-4-jitao.shi@mediatek.com/


Changes in v2:
- Fix build test ERROR Reported-by: kernel test robot <lkp@intel.com>
- Added a new patch to describe the dsi reset optional property.

Enric Balletbo i Serra (7):
  arm64: dts: mediatek: Move reset controller constants into common
    location
  dt-bindings: mediatek: Add #reset-cells to mmsys system controller
  dt-bindings: display: mediatek: add dsi reset optional property
  arm64: dts: mt8173: Add the mmsys reset bit to reset the dsi0
  arm64: dts: mt8183: Add the mmsys reset bit to reset the dsi0
  soc: mediatek: mmsys: Add reset controller support
  drm/mediatek: mtk_dsi: Reset the dsi0 hardware

 .../bindings/arm/mediatek/mediatek,mmsys.txt  |  2 +
 .../display/mediatek/mediatek,dsi.txt         |  6 ++
 arch/arm64/boot/dts/mediatek/mt8173.dtsi      |  2 +
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      |  5 +-
 drivers/gpu/drm/mediatek/mtk_dsi.c            |  5 +-
 drivers/soc/mediatek/mtk-mmsys.c              | 69 +++++++++++++++++++
 drivers/soc/mediatek/mtk-mmsys.h              |  2 +
 drivers/watchdog/mtk_wdt.c                    |  6 +-
 .../mt2712-resets.h                           |  0
 include/dt-bindings/reset/mt8173-resets.h     |  2 +
 .../mt8183-resets.h                           |  3 +
 .../mt8192-resets.h                           |  0
 12 files changed, 96 insertions(+), 6 deletions(-)
 rename include/dt-bindings/{reset-controller => reset}/mt2712-resets.h (100%)
 rename include/dt-bindings/{reset-controller => reset}/mt8183-resets.h (98%)
 rename include/dt-bindings/{reset-controller => reset}/mt8192-resets.h (100%)

-- 
2.30.2

[PATCH v2 1/7] arm64: dts: mediatek: Move reset controller constants into common location

[Enric Balletbo i Serra]

The DT binding includes for reset controllers are located in
include/dt-bindings/reset/. Move the Mediatek reset constants in there.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

Changes in v2:
- Fix build test ERROR Reported-by: kernel test robot <lkp@intel.com>

 arch/arm64/boot/dts/mediatek/mt8183.dtsi                    | 2 +-
 drivers/watchdog/mtk_wdt.c                                  | 6 +++---
 .../dt-bindings/{reset-controller => reset}/mt2712-resets.h | 0
 .../dt-bindings/{reset-controller => reset}/mt8183-resets.h | 0
 .../dt-bindings/{reset-controller => reset}/mt8192-resets.h | 0
 5 files changed, 4 insertions(+), 4 deletions(-)
 rename include/dt-bindings/{reset-controller => reset}/mt2712-resets.h (100%)
 rename include/dt-bindings/{reset-controller => reset}/mt8183-resets.h (100%)
 rename include/dt-bindings/{reset-controller => reset}/mt8192-resets.h (100%)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 96473d88f391..4ef0b5b23047 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -11,7 +11,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/memory/mt8183-larb-port.h>
 #include <dt-bindings/power/mt8183-power.h>
-#include <dt-bindings/reset-controller/mt8183-resets.h>
+#include <dt-bindings/reset/mt8183-resets.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/thermal/thermal.h>
 #include "mt8183-pinfunc.h"
diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
index 16b6aff324a7..6986bc740465 100644
--- a/drivers/watchdog/mtk_wdt.c
+++ b/drivers/watchdog/mtk_wdt.c
@@ -9,9 +9,9 @@
  * Based on sunxi_wdt.c
  */
 
-#include <dt-bindings/reset-controller/mt2712-resets.h>
-#include <dt-bindings/reset-controller/mt8183-resets.h>
-#include <dt-bindings/reset-controller/mt8192-resets.h>
+#include <dt-bindings/reset/mt2712-resets.h>
+#include <dt-bindings/reset/mt8183-resets.h>
+#include <dt-bindings/reset/mt8192-resets.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/init.h>
diff --git a/include/dt-bindings/reset-controller/mt2712-resets.h b/include/dt-bindings/reset/mt2712-resets.h
similarity index 100%
rename from include/dt-bindings/reset-controller/mt2712-resets.h
rename to include/dt-bindings/reset/mt2712-resets.h
diff --git a/include/dt-bindings/reset-controller/mt8183-resets.h b/include/dt-bindings/reset/mt8183-resets.h
similarity index 100%
rename from include/dt-bindings/reset-controller/mt8183-resets.h
rename to include/dt-bindings/reset/mt8183-resets.h
diff --git a/include/dt-bindings/reset-controller/mt8192-resets.h b/include/dt-bindings/reset/mt8192-resets.h
similarity index 100%
rename from include/dt-bindings/reset-controller/mt8192-resets.h
rename to include/dt-bindings/reset/mt8192-resets.h
-- 
2.30.2

[PATCH v2 1/7] arm64: dts: mediatek: Move reset controller constants into common location

[Enric Balletbo i Serra]

The DT binding includes for reset controllers are located in
include/dt-bindings/reset/. Move the Mediatek reset constants in there.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

Changes in v2:
- Fix build test ERROR Reported-by: kernel test robot <lkp@intel.com>

 arch/arm64/boot/dts/mediatek/mt8183.dtsi                    | 2 +-
 drivers/watchdog/mtk_wdt.c                                  | 6 +++---
 .../dt-bindings/{reset-controller => reset}/mt2712-resets.h | 0
 .../dt-bindings/{reset-controller => reset}/mt8183-resets.h | 0
 .../dt-bindings/{reset-controller => reset}/mt8192-resets.h | 0
 5 files changed, 4 insertions(+), 4 deletions(-)
 rename include/dt-bindings/{reset-controller => reset}/mt2712-resets.h (100%)
 rename include/dt-bindings/{reset-controller => reset}/mt8183-resets.h (100%)
 rename include/dt-bindings/{reset-controller => reset}/mt8192-resets.h (100%)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 96473d88f391..4ef0b5b23047 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -11,7 +11,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/memory/mt8183-larb-port.h>
 #include <dt-bindings/power/mt8183-power.h>
-#include <dt-bindings/reset-controller/mt8183-resets.h>
+#include <dt-bindings/reset/mt8183-resets.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/thermal/thermal.h>
 #include "mt8183-pinfunc.h"
diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
index 16b6aff324a7..6986bc740465 100644
--- a/drivers/watchdog/mtk_wdt.c
+++ b/drivers/watchdog/mtk_wdt.c
@@ -9,9 +9,9 @@
  * Based on sunxi_wdt.c
  */
 
-#include <dt-bindings/reset-controller/mt2712-resets.h>
-#include <dt-bindings/reset-controller/mt8183-resets.h>
-#include <dt-bindings/reset-controller/mt8192-resets.h>
+#include <dt-bindings/reset/mt2712-resets.h>
+#include <dt-bindings/reset/mt8183-resets.h>
+#include <dt-bindings/reset/mt8192-resets.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/init.h>
diff --git a/include/dt-bindings/reset-controller/mt2712-resets.h b/include/dt-bindings/reset/mt2712-resets.h
similarity index 100%
rename from include/dt-bindings/reset-controller/mt2712-resets.h
rename to include/dt-bindings/reset/mt2712-resets.h
diff --git a/include/dt-bindings/reset-controller/mt8183-resets.h b/include/dt-bindings/reset/mt8183-resets.h
similarity index 100%
rename from include/dt-bindings/reset-controller/mt8183-resets.h
rename to include/dt-bindings/reset/mt8183-resets.h
diff --git a/include/dt-bindings/reset-controller/mt8192-resets.h b/include/dt-bindings/reset/mt8192-resets.h
similarity index 100%
rename from include/dt-bindings/reset-controller/mt8192-resets.h
rename to include/dt-bindings/reset/mt8192-resets.h
-- 
2.30.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 1/7] arm64: dts: mediatek: Move reset controller constants into common location

[Enric Balletbo i Serra]

The DT binding includes for reset controllers are located in
include/dt-bindings/reset/. Move the Mediatek reset constants in there.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

Changes in v2:
- Fix build test ERROR Reported-by: kernel test robot <lkp@intel.com>

 arch/arm64/boot/dts/mediatek/mt8183.dtsi                    | 2 +-
 drivers/watchdog/mtk_wdt.c                                  | 6 +++---
 .../dt-bindings/{reset-controller => reset}/mt2712-resets.h | 0
 .../dt-bindings/{reset-controller => reset}/mt8183-resets.h | 0
 .../dt-bindings/{reset-controller => reset}/mt8192-resets.h | 0
 5 files changed, 4 insertions(+), 4 deletions(-)
 rename include/dt-bindings/{reset-controller => reset}/mt2712-resets.h (100%)
 rename include/dt-bindings/{reset-controller => reset}/mt8183-resets.h (100%)
 rename include/dt-bindings/{reset-controller => reset}/mt8192-resets.h (100%)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 96473d88f391..4ef0b5b23047 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -11,7 +11,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/memory/mt8183-larb-port.h>
 #include <dt-bindings/power/mt8183-power.h>
-#include <dt-bindings/reset-controller/mt8183-resets.h>
+#include <dt-bindings/reset/mt8183-resets.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/thermal/thermal.h>
 #include "mt8183-pinfunc.h"
diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
index 16b6aff324a7..6986bc740465 100644
--- a/drivers/watchdog/mtk_wdt.c
+++ b/drivers/watchdog/mtk_wdt.c
@@ -9,9 +9,9 @@
  * Based on sunxi_wdt.c
  */
 
-#include <dt-bindings/reset-controller/mt2712-resets.h>
-#include <dt-bindings/reset-controller/mt8183-resets.h>
-#include <dt-bindings/reset-controller/mt8192-resets.h>
+#include <dt-bindings/reset/mt2712-resets.h>
+#include <dt-bindings/reset/mt8183-resets.h>
+#include <dt-bindings/reset/mt8192-resets.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/init.h>
diff --git a/include/dt-bindings/reset-controller/mt2712-resets.h b/include/dt-bindings/reset/mt2712-resets.h
similarity index 100%
rename from include/dt-bindings/reset-controller/mt2712-resets.h
rename to include/dt-bindings/reset/mt2712-resets.h
diff --git a/include/dt-bindings/reset-controller/mt8183-resets.h b/include/dt-bindings/reset/mt8183-resets.h
similarity index 100%
rename from include/dt-bindings/reset-controller/mt8183-resets.h
rename to include/dt-bindings/reset/mt8183-resets.h
diff --git a/include/dt-bindings/reset-controller/mt8192-resets.h b/include/dt-bindings/reset/mt8192-resets.h
similarity index 100%
rename from include/dt-bindings/reset-controller/mt8192-resets.h
rename to include/dt-bindings/reset/mt8192-resets.h
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 2/7] dt-bindings: mediatek: Add #reset-cells to mmsys system controller

[Enric Balletbo i Serra]

The mmsys system controller exposes a set of memory client resets and
needs to specify the #reset-cells property in order to advertise the
number of cells needed to describe each of the resets.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

(no changes since v1)

 .../devicetree/bindings/arm/mediatek/mediatek,mmsys.txt         | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
index 78c50733985c..ce958446558e 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
@@ -17,6 +17,7 @@ Required Properties:
 	- "mediatek,mt8173-mmsys", "syscon"
 	- "mediatek,mt8183-mmsys", "syscon"
 - #clock-cells: Must be 1
+- #reset-cells: Must be 1
 
 For the clock control, the mmsys controller uses the common clk binding from
 Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -28,4 +29,5 @@ mmsys: syscon@14000000 {
 	compatible = "mediatek,mt8173-mmsys", "syscon";
 	reg = <0 0x14000000 0 0x1000>;
 	#clock-cells = <1>;
+	#reset-cells = <1>;
 };
-- 
2.30.2

[PATCH v2 2/7] dt-bindings: mediatek: Add #reset-cells to mmsys system controller

[Enric Balletbo i Serra]

The mmsys system controller exposes a set of memory client resets and
needs to specify the #reset-cells property in order to advertise the
number of cells needed to describe each of the resets.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

(no changes since v1)

 .../devicetree/bindings/arm/mediatek/mediatek,mmsys.txt         | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
index 78c50733985c..ce958446558e 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
@@ -17,6 +17,7 @@ Required Properties:
 	- "mediatek,mt8173-mmsys", "syscon"
 	- "mediatek,mt8183-mmsys", "syscon"
 - #clock-cells: Must be 1
+- #reset-cells: Must be 1
 
 For the clock control, the mmsys controller uses the common clk binding from
 Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -28,4 +29,5 @@ mmsys: syscon@14000000 {
 	compatible = "mediatek,mt8173-mmsys", "syscon";
 	reg = <0 0x14000000 0 0x1000>;
 	#clock-cells = <1>;
+	#reset-cells = <1>;
 };
-- 
2.30.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 2/7] dt-bindings: mediatek: Add #reset-cells to mmsys system controller

[Enric Balletbo i Serra]

The mmsys system controller exposes a set of memory client resets and
needs to specify the #reset-cells property in order to advertise the
number of cells needed to describe each of the resets.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

(no changes since v1)

 .../devicetree/bindings/arm/mediatek/mediatek,mmsys.txt         | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
index 78c50733985c..ce958446558e 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
@@ -17,6 +17,7 @@ Required Properties:
 	- "mediatek,mt8173-mmsys", "syscon"
 	- "mediatek,mt8183-mmsys", "syscon"
 - #clock-cells: Must be 1
+- #reset-cells: Must be 1
 
 For the clock control, the mmsys controller uses the common clk binding from
 Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -28,4 +29,5 @@ mmsys: syscon@14000000 {
 	compatible = "mediatek,mt8173-mmsys", "syscon";
 	reg = <0 0x14000000 0 0x1000>;
 	#clock-cells = <1>;
+	#reset-cells = <1>;
 };
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 3/7] dt-bindings: display: mediatek: add dsi reset optional property

[Enric Balletbo i Serra]

Update device tree binding documentation for the dsi to add the optional
property to reset the dsi controller.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

Changes in v2:
- Added a new patch to describe the dsi reset optional property.

 .../devicetree/bindings/display/mediatek/mediatek,dsi.txt   | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index 8238a86686be..3209b700ded6 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -19,6 +19,11 @@ Required properties:
   Documentation/devicetree/bindings/graph.txt. This port should be connected
   to the input port of an attached DSI panel or DSI-to-eDP encoder chip.
 
+Optional properties:
+- resets: list of phandle + reset specifier pair, as described in [1].
+
+[1] Documentation/devicetree/bindings/reset/reset.txt
+
 MIPI TX Configuration Module
 ============================
 
@@ -45,6 +50,7 @@ dsi0: dsi@1401b000 {
 	clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>,
 		 <&mipi_tx0>;
 	clock-names = "engine", "digital", "hs";
+	resets = <&mmsys MT8173_MMSYS_SW0_RST_B_DISP_DSI0>;
 	phys = <&mipi_tx0>;
 	phy-names = "dphy";
 
-- 
2.30.2

[PATCH v2 3/7] dt-bindings: display: mediatek: add dsi reset optional property

[Enric Balletbo i Serra]

Update device tree binding documentation for the dsi to add the optional
property to reset the dsi controller.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

Changes in v2:
- Added a new patch to describe the dsi reset optional property.

 .../devicetree/bindings/display/mediatek/mediatek,dsi.txt   | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index 8238a86686be..3209b700ded6 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -19,6 +19,11 @@ Required properties:
   Documentation/devicetree/bindings/graph.txt. This port should be connected
   to the input port of an attached DSI panel or DSI-to-eDP encoder chip.
 
+Optional properties:
+- resets: list of phandle + reset specifier pair, as described in [1].
+
+[1] Documentation/devicetree/bindings/reset/reset.txt
+
 MIPI TX Configuration Module
 ============================
 
@@ -45,6 +50,7 @@ dsi0: dsi@1401b000 {
 	clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>,
 		 <&mipi_tx0>;
 	clock-names = "engine", "digital", "hs";
+	resets = <&mmsys MT8173_MMSYS_SW0_RST_B_DISP_DSI0>;
 	phys = <&mipi_tx0>;
 	phy-names = "dphy";
 
-- 
2.30.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 3/7] dt-bindings: display: mediatek: add dsi reset optional property

[Enric Balletbo i Serra]

Update device tree binding documentation for the dsi to add the optional
property to reset the dsi controller.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

Changes in v2:
- Added a new patch to describe the dsi reset optional property.

 .../devicetree/bindings/display/mediatek/mediatek,dsi.txt   | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index 8238a86686be..3209b700ded6 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -19,6 +19,11 @@ Required properties:
   Documentation/devicetree/bindings/graph.txt. This port should be connected
   to the input port of an attached DSI panel or DSI-to-eDP encoder chip.
 
+Optional properties:
+- resets: list of phandle + reset specifier pair, as described in [1].
+
+[1] Documentation/devicetree/bindings/reset/reset.txt
+
 MIPI TX Configuration Module
 ============================
 
@@ -45,6 +50,7 @@ dsi0: dsi@1401b000 {
 	clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>,
 		 <&mipi_tx0>;
 	clock-names = "engine", "digital", "hs";
+	resets = <&mmsys MT8173_MMSYS_SW0_RST_B_DISP_DSI0>;
 	phys = <&mipi_tx0>;
 	phy-names = "dphy";
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 3/7] dt-bindings: display: mediatek: add dsi reset optional property

[Enric Balletbo i Serra]

Update device tree binding documentation for the dsi to add the optional
property to reset the dsi controller.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

Changes in v2:
- Added a new patch to describe the dsi reset optional property.

 .../devicetree/bindings/display/mediatek/mediatek,dsi.txt   | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index 8238a86686be..3209b700ded6 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -19,6 +19,11 @@ Required properties:
   Documentation/devicetree/bindings/graph.txt. This port should be connected
   to the input port of an attached DSI panel or DSI-to-eDP encoder chip.
 
+Optional properties:
+- resets: list of phandle + reset specifier pair, as described in [1].
+
+[1] Documentation/devicetree/bindings/reset/reset.txt
+
 MIPI TX Configuration Module
 ============================
 
@@ -45,6 +50,7 @@ dsi0: dsi@1401b000 {
 	clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>,
 		 <&mipi_tx0>;
 	clock-names = "engine", "digital", "hs";
+	resets = <&mmsys MT8173_MMSYS_SW0_RST_B_DISP_DSI0>;
 	phys = <&mipi_tx0>;
 	phy-names = "dphy";
 
-- 
2.30.2

[PATCH v2 4/7] arm64: dts: mt8173: Add the mmsys reset bit to reset the dsi0

[Enric Balletbo i Serra]

Reset the DSI hardware is needed to prevent different settings between
the bootloader and the kernel.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

(no changes since v1)

 arch/arm64/boot/dts/mediatek/mt8173.dtsi  | 2 ++
 include/dt-bindings/reset/mt8173-resets.h | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index a3de6374d495..2ac77d47bf81 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -1036,6 +1036,7 @@ mmsys: syscon@14000000 {
 			assigned-clocks = <&topckgen CLK_TOP_MM_SEL>;
 			assigned-clock-rates = <400000000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
 				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
@@ -1261,6 +1262,7 @@ dsi0: dsi@1401b000 {
 				 <&mmsys CLK_MM_DSI0_DIGITAL>,
 				 <&mipi_tx0>;
 			clock-names = "engine", "digital", "hs";
+			resets = <&mmsys MT8173_MMSYS_SW0_RST_B_DISP_DSI0>;
 			phys = <&mipi_tx0>;
 			phy-names = "dphy";
 			status = "disabled";
diff --git a/include/dt-bindings/reset/mt8173-resets.h b/include/dt-bindings/reset/mt8173-resets.h
index ba8636eda5ae..6a60c7cecc4c 100644
--- a/include/dt-bindings/reset/mt8173-resets.h
+++ b/include/dt-bindings/reset/mt8173-resets.h
@@ -27,6 +27,8 @@
 #define MT8173_INFRA_GCE_FAXI_RST       40
 #define MT8173_INFRA_MMIOMMURST         47
 
+/* MMSYS resets */
+#define MT8173_MMSYS_SW0_RST_B_DISP_DSI0	25
 
 /*  PERICFG resets */
 #define MT8173_PERI_UART0_SW_RST        0
-- 
2.30.2

[PATCH v2 4/7] arm64: dts: mt8173: Add the mmsys reset bit to reset the dsi0

[Enric Balletbo i Serra]

Reset the DSI hardware is needed to prevent different settings between
the bootloader and the kernel.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

(no changes since v1)

 arch/arm64/boot/dts/mediatek/mt8173.dtsi  | 2 ++
 include/dt-bindings/reset/mt8173-resets.h | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index a3de6374d495..2ac77d47bf81 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -1036,6 +1036,7 @@ mmsys: syscon@14000000 {
 			assigned-clocks = <&topckgen CLK_TOP_MM_SEL>;
 			assigned-clock-rates = <400000000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
 				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
@@ -1261,6 +1262,7 @@ dsi0: dsi@1401b000 {
 				 <&mmsys CLK_MM_DSI0_DIGITAL>,
 				 <&mipi_tx0>;
 			clock-names = "engine", "digital", "hs";
+			resets = <&mmsys MT8173_MMSYS_SW0_RST_B_DISP_DSI0>;
 			phys = <&mipi_tx0>;
 			phy-names = "dphy";
 			status = "disabled";
diff --git a/include/dt-bindings/reset/mt8173-resets.h b/include/dt-bindings/reset/mt8173-resets.h
index ba8636eda5ae..6a60c7cecc4c 100644
--- a/include/dt-bindings/reset/mt8173-resets.h
+++ b/include/dt-bindings/reset/mt8173-resets.h
@@ -27,6 +27,8 @@
 #define MT8173_INFRA_GCE_FAXI_RST       40
 #define MT8173_INFRA_MMIOMMURST         47
 
+/* MMSYS resets */
+#define MT8173_MMSYS_SW0_RST_B_DISP_DSI0	25
 
 /*  PERICFG resets */
 #define MT8173_PERI_UART0_SW_RST        0
-- 
2.30.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 4/7] arm64: dts: mt8173: Add the mmsys reset bit to reset the dsi0

[Enric Balletbo i Serra]

Reset the DSI hardware is needed to prevent different settings between
the bootloader and the kernel.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

(no changes since v1)

 arch/arm64/boot/dts/mediatek/mt8173.dtsi  | 2 ++
 include/dt-bindings/reset/mt8173-resets.h | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index a3de6374d495..2ac77d47bf81 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -1036,6 +1036,7 @@ mmsys: syscon@14000000 {
 			assigned-clocks = <&topckgen CLK_TOP_MM_SEL>;
 			assigned-clock-rates = <400000000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
 				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
@@ -1261,6 +1262,7 @@ dsi0: dsi@1401b000 {
 				 <&mmsys CLK_MM_DSI0_DIGITAL>,
 				 <&mipi_tx0>;
 			clock-names = "engine", "digital", "hs";
+			resets = <&mmsys MT8173_MMSYS_SW0_RST_B_DISP_DSI0>;
 			phys = <&mipi_tx0>;
 			phy-names = "dphy";
 			status = "disabled";
diff --git a/include/dt-bindings/reset/mt8173-resets.h b/include/dt-bindings/reset/mt8173-resets.h
index ba8636eda5ae..6a60c7cecc4c 100644
--- a/include/dt-bindings/reset/mt8173-resets.h
+++ b/include/dt-bindings/reset/mt8173-resets.h
@@ -27,6 +27,8 @@
 #define MT8173_INFRA_GCE_FAXI_RST       40
 #define MT8173_INFRA_MMIOMMURST         47
 
+/* MMSYS resets */
+#define MT8173_MMSYS_SW0_RST_B_DISP_DSI0	25
 
 /*  PERICFG resets */
 #define MT8173_PERI_UART0_SW_RST        0
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 5/7] arm64: dts: mt8183: Add the mmsys reset bit to reset the dsi0

[Enric Balletbo i Serra]

Reset the DSI hardware is needed to prevent different settings between
the bootloader and the kernel.

While here, also remove the undocumented and also not used
'mediatek,syscon-dsi' property.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

(no changes since v1)

 arch/arm64/boot/dts/mediatek/mt8183.dtsi  | 3 ++-
 include/dt-bindings/reset/mt8183-resets.h | 3 +++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 4ef0b5b23047..7ae108f8ba89 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1251,6 +1251,7 @@ mmsys: syscon@14000000 {
 			compatible = "mediatek,mt8183-mmsys", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
 				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
@@ -1365,11 +1366,11 @@ dsi0: dsi@14014000 {
 			reg = <0 0x14014000 0 0x1000>;
 			interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>;
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
-			mediatek,syscon-dsi = <&mmsys 0x140>;
 			clocks = <&mmsys CLK_MM_DSI0_MM>,
 				 <&mmsys CLK_MM_DSI0_IF>,
 				 <&mipi_tx0>;
 			clock-names = "engine", "digital", "hs";
+			resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>;
 			phys = <&mipi_tx0>;
 			phy-names = "dphy";
 		};
diff --git a/include/dt-bindings/reset/mt8183-resets.h b/include/dt-bindings/reset/mt8183-resets.h
index a1bbd41e0d12..48c5d2de0a38 100644
--- a/include/dt-bindings/reset/mt8183-resets.h
+++ b/include/dt-bindings/reset/mt8183-resets.h
@@ -80,6 +80,9 @@
 
 #define MT8183_INFRACFG_SW_RST_NUM				128
 
+/* MMSYS resets */
+#define MT8183_MMSYS_SW0_RST_B_DISP_DSI0			25
+
 #define MT8183_TOPRGU_MM_SW_RST					1
 #define MT8183_TOPRGU_MFG_SW_RST				2
 #define MT8183_TOPRGU_VENC_SW_RST				3
-- 
2.30.2

[PATCH v2 5/7] arm64: dts: mt8183: Add the mmsys reset bit to reset the dsi0

[Enric Balletbo i Serra]

Reset the DSI hardware is needed to prevent different settings between
the bootloader and the kernel.

While here, also remove the undocumented and also not used
'mediatek,syscon-dsi' property.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

(no changes since v1)

 arch/arm64/boot/dts/mediatek/mt8183.dtsi  | 3 ++-
 include/dt-bindings/reset/mt8183-resets.h | 3 +++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 4ef0b5b23047..7ae108f8ba89 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1251,6 +1251,7 @@ mmsys: syscon@14000000 {
 			compatible = "mediatek,mt8183-mmsys", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
 				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
@@ -1365,11 +1366,11 @@ dsi0: dsi@14014000 {
 			reg = <0 0x14014000 0 0x1000>;
 			interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>;
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
-			mediatek,syscon-dsi = <&mmsys 0x140>;
 			clocks = <&mmsys CLK_MM_DSI0_MM>,
 				 <&mmsys CLK_MM_DSI0_IF>,
 				 <&mipi_tx0>;
 			clock-names = "engine", "digital", "hs";
+			resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>;
 			phys = <&mipi_tx0>;
 			phy-names = "dphy";
 		};
diff --git a/include/dt-bindings/reset/mt8183-resets.h b/include/dt-bindings/reset/mt8183-resets.h
index a1bbd41e0d12..48c5d2de0a38 100644
--- a/include/dt-bindings/reset/mt8183-resets.h
+++ b/include/dt-bindings/reset/mt8183-resets.h
@@ -80,6 +80,9 @@
 
 #define MT8183_INFRACFG_SW_RST_NUM				128
 
+/* MMSYS resets */
+#define MT8183_MMSYS_SW0_RST_B_DISP_DSI0			25
+
 #define MT8183_TOPRGU_MM_SW_RST					1
 #define MT8183_TOPRGU_MFG_SW_RST				2
 #define MT8183_TOPRGU_VENC_SW_RST				3
-- 
2.30.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 5/7] arm64: dts: mt8183: Add the mmsys reset bit to reset the dsi0

[Enric Balletbo i Serra]

Reset the DSI hardware is needed to prevent different settings between
the bootloader and the kernel.

While here, also remove the undocumented and also not used
'mediatek,syscon-dsi' property.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

(no changes since v1)

 arch/arm64/boot/dts/mediatek/mt8183.dtsi  | 3 ++-
 include/dt-bindings/reset/mt8183-resets.h | 3 +++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 4ef0b5b23047..7ae108f8ba89 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1251,6 +1251,7 @@ mmsys: syscon@14000000 {
 			compatible = "mediatek,mt8183-mmsys", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
 				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
@@ -1365,11 +1366,11 @@ dsi0: dsi@14014000 {
 			reg = <0 0x14014000 0 0x1000>;
 			interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>;
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
-			mediatek,syscon-dsi = <&mmsys 0x140>;
 			clocks = <&mmsys CLK_MM_DSI0_MM>,
 				 <&mmsys CLK_MM_DSI0_IF>,
 				 <&mipi_tx0>;
 			clock-names = "engine", "digital", "hs";
+			resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>;
 			phys = <&mipi_tx0>;
 			phy-names = "dphy";
 		};
diff --git a/include/dt-bindings/reset/mt8183-resets.h b/include/dt-bindings/reset/mt8183-resets.h
index a1bbd41e0d12..48c5d2de0a38 100644
--- a/include/dt-bindings/reset/mt8183-resets.h
+++ b/include/dt-bindings/reset/mt8183-resets.h
@@ -80,6 +80,9 @@
 
 #define MT8183_INFRACFG_SW_RST_NUM				128
 
+/* MMSYS resets */
+#define MT8183_MMSYS_SW0_RST_B_DISP_DSI0			25
+
 #define MT8183_TOPRGU_MM_SW_RST					1
 #define MT8183_TOPRGU_MFG_SW_RST				2
 #define MT8183_TOPRGU_VENC_SW_RST				3
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 6/7] soc: mediatek: mmsys: Add reset controller support

[Enric Balletbo i Serra]

Among other features the mmsys driver should implement a reset
controller to be able to reset different bits from their space.

Cc: Jitao Shi <jitao.shi@mediatek.com>
Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

(no changes since v1)

 drivers/soc/mediatek/mtk-mmsys.c | 69 ++++++++++++++++++++++++++++++++
 drivers/soc/mediatek/mtk-mmsys.h |  2 +
 2 files changed, 71 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index e681029fe804..6ac4deff0164 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -4,10 +4,12 @@
  * Author: James Liao <jamesjj.liao@mediatek.com>
  */
 
+#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/io.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/reset-controller.h>
 #include <linux/soc/mediatek/mtk-mmsys.h>
 
 #include "mtk-mmsys.h"
@@ -55,6 +57,8 @@ static const struct mtk_mmsys_driver_data mt8183_mmsys_driver_data = {
 struct mtk_mmsys {
 	void __iomem *regs;
 	const struct mtk_mmsys_driver_data *data;
+	spinlock_t lock; /* protects mmsys_sw_rst_b reg */
+	struct reset_controller_dev rcdev;
 };
 
 void mtk_mmsys_ddp_connect(struct device *dev,
@@ -91,6 +95,59 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_disconnect);
 
+static int mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned long id,
+				  bool assert)
+{
+	struct mtk_mmsys *mmsys = container_of(rcdev, struct mtk_mmsys, rcdev);
+	unsigned long flags;
+	u32 reg;
+	int i;
+
+	spin_lock_irqsave(&mmsys->lock, flags);
+
+	reg = readl_relaxed(mmsys->regs + MMSYS_SW0_RST_B);
+
+	if (assert)
+		reg &= ~BIT(id);
+	else
+		reg |= BIT(id);
+
+	writel_relaxed(reg, mmsys->regs + MMSYS_SW0_RST_B);
+
+	spin_unlock_irqrestore(&mmsys->lock, flags);
+
+	return 0;
+}
+
+static int mtk_mmsys_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	return mtk_mmsys_reset_update(rcdev, id, true);
+}
+
+static int mtk_mmsys_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	return mtk_mmsys_reset_update(rcdev, id, false);
+}
+
+static int mtk_mmsys_reset(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	int ret;
+
+	ret = mtk_mmsys_reset_assert(rcdev, id);
+	if (ret)
+		return ret;
+
+	usleep_range(1000, 1100);
+
+	return mtk_mmsys_reset_deassert(rcdev, id);
+}
+
+static const struct reset_control_ops mtk_mmsys_reset_ops = {
+	.assert = mtk_mmsys_reset_assert,
+	.deassert = mtk_mmsys_reset_deassert,
+	.reset = mtk_mmsys_reset,
+};
+
 static int mtk_mmsys_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -111,6 +168,18 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	spin_lock_init(&mmsys->lock);
+
+	mmsys->rcdev.owner = THIS_MODULE;
+	mmsys->rcdev.nr_resets = 32;
+	mmsys->rcdev.ops = &mtk_mmsys_reset_ops;
+	mmsys->rcdev.of_node = pdev->dev.of_node;
+	ret = devm_reset_controller_register(&pdev->dev, &mmsys->rcdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Couldn't register mmsys reset controller: %d\n", ret);
+		return ret;
+	}
+
 	mmsys->data = of_device_get_match_data(&pdev->dev);
 	platform_set_drvdata(pdev, mmsys);
 
diff --git a/drivers/soc/mediatek/mtk-mmsys.h b/drivers/soc/mediatek/mtk-mmsys.h
index 11388961dded..f9f9e12ceab8 100644
--- a/drivers/soc/mediatek/mtk-mmsys.h
+++ b/drivers/soc/mediatek/mtk-mmsys.h
@@ -66,6 +66,8 @@
 #define DPI_SEL_IN_BLS				0x0
 #define DSI_SEL_IN_RDMA				0x1
 
+#define MMSYS_SW0_RST_B				0x140
+
 struct mtk_mmsys_routes {
 	u32 from_comp;
 	u32 to_comp;
-- 
2.30.2

[PATCH v2 6/7] soc: mediatek: mmsys: Add reset controller support

[Enric Balletbo i Serra]

Among other features the mmsys driver should implement a reset
controller to be able to reset different bits from their space.

Cc: Jitao Shi <jitao.shi@mediatek.com>
Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

(no changes since v1)

 drivers/soc/mediatek/mtk-mmsys.c | 69 ++++++++++++++++++++++++++++++++
 drivers/soc/mediatek/mtk-mmsys.h |  2 +
 2 files changed, 71 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index e681029fe804..6ac4deff0164 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -4,10 +4,12 @@
  * Author: James Liao <jamesjj.liao@mediatek.com>
  */
 
+#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/io.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/reset-controller.h>
 #include <linux/soc/mediatek/mtk-mmsys.h>
 
 #include "mtk-mmsys.h"
@@ -55,6 +57,8 @@ static const struct mtk_mmsys_driver_data mt8183_mmsys_driver_data = {
 struct mtk_mmsys {
 	void __iomem *regs;
 	const struct mtk_mmsys_driver_data *data;
+	spinlock_t lock; /* protects mmsys_sw_rst_b reg */
+	struct reset_controller_dev rcdev;
 };
 
 void mtk_mmsys_ddp_connect(struct device *dev,
@@ -91,6 +95,59 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_disconnect);
 
+static int mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned long id,
+				  bool assert)
+{
+	struct mtk_mmsys *mmsys = container_of(rcdev, struct mtk_mmsys, rcdev);
+	unsigned long flags;
+	u32 reg;
+	int i;
+
+	spin_lock_irqsave(&mmsys->lock, flags);
+
+	reg = readl_relaxed(mmsys->regs + MMSYS_SW0_RST_B);
+
+	if (assert)
+		reg &= ~BIT(id);
+	else
+		reg |= BIT(id);
+
+	writel_relaxed(reg, mmsys->regs + MMSYS_SW0_RST_B);
+
+	spin_unlock_irqrestore(&mmsys->lock, flags);
+
+	return 0;
+}
+
+static int mtk_mmsys_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	return mtk_mmsys_reset_update(rcdev, id, true);
+}
+
+static int mtk_mmsys_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	return mtk_mmsys_reset_update(rcdev, id, false);
+}
+
+static int mtk_mmsys_reset(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	int ret;
+
+	ret = mtk_mmsys_reset_assert(rcdev, id);
+	if (ret)
+		return ret;
+
+	usleep_range(1000, 1100);
+
+	return mtk_mmsys_reset_deassert(rcdev, id);
+}
+
+static const struct reset_control_ops mtk_mmsys_reset_ops = {
+	.assert = mtk_mmsys_reset_assert,
+	.deassert = mtk_mmsys_reset_deassert,
+	.reset = mtk_mmsys_reset,
+};
+
 static int mtk_mmsys_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -111,6 +168,18 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	spin_lock_init(&mmsys->lock);
+
+	mmsys->rcdev.owner = THIS_MODULE;
+	mmsys->rcdev.nr_resets = 32;
+	mmsys->rcdev.ops = &mtk_mmsys_reset_ops;
+	mmsys->rcdev.of_node = pdev->dev.of_node;
+	ret = devm_reset_controller_register(&pdev->dev, &mmsys->rcdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Couldn't register mmsys reset controller: %d\n", ret);
+		return ret;
+	}
+
 	mmsys->data = of_device_get_match_data(&pdev->dev);
 	platform_set_drvdata(pdev, mmsys);
 
diff --git a/drivers/soc/mediatek/mtk-mmsys.h b/drivers/soc/mediatek/mtk-mmsys.h
index 11388961dded..f9f9e12ceab8 100644
--- a/drivers/soc/mediatek/mtk-mmsys.h
+++ b/drivers/soc/mediatek/mtk-mmsys.h
@@ -66,6 +66,8 @@
 #define DPI_SEL_IN_BLS				0x0
 #define DSI_SEL_IN_RDMA				0x1
 
+#define MMSYS_SW0_RST_B				0x140
+
 struct mtk_mmsys_routes {
 	u32 from_comp;
 	u32 to_comp;
-- 
2.30.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 6/7] soc: mediatek: mmsys: Add reset controller support

[Enric Balletbo i Serra]

Among other features the mmsys driver should implement a reset
controller to be able to reset different bits from their space.

Cc: Jitao Shi <jitao.shi@mediatek.com>
Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

(no changes since v1)

 drivers/soc/mediatek/mtk-mmsys.c | 69 ++++++++++++++++++++++++++++++++
 drivers/soc/mediatek/mtk-mmsys.h |  2 +
 2 files changed, 71 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index e681029fe804..6ac4deff0164 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -4,10 +4,12 @@
  * Author: James Liao <jamesjj.liao@mediatek.com>
  */
 
+#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/io.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/reset-controller.h>
 #include <linux/soc/mediatek/mtk-mmsys.h>
 
 #include "mtk-mmsys.h"
@@ -55,6 +57,8 @@ static const struct mtk_mmsys_driver_data mt8183_mmsys_driver_data = {
 struct mtk_mmsys {
 	void __iomem *regs;
 	const struct mtk_mmsys_driver_data *data;
+	spinlock_t lock; /* protects mmsys_sw_rst_b reg */
+	struct reset_controller_dev rcdev;
 };
 
 void mtk_mmsys_ddp_connect(struct device *dev,
@@ -91,6 +95,59 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_disconnect);
 
+static int mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned long id,
+				  bool assert)
+{
+	struct mtk_mmsys *mmsys = container_of(rcdev, struct mtk_mmsys, rcdev);
+	unsigned long flags;
+	u32 reg;
+	int i;
+
+	spin_lock_irqsave(&mmsys->lock, flags);
+
+	reg = readl_relaxed(mmsys->regs + MMSYS_SW0_RST_B);
+
+	if (assert)
+		reg &= ~BIT(id);
+	else
+		reg |= BIT(id);
+
+	writel_relaxed(reg, mmsys->regs + MMSYS_SW0_RST_B);
+
+	spin_unlock_irqrestore(&mmsys->lock, flags);
+
+	return 0;
+}
+
+static int mtk_mmsys_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	return mtk_mmsys_reset_update(rcdev, id, true);
+}
+
+static int mtk_mmsys_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	return mtk_mmsys_reset_update(rcdev, id, false);
+}
+
+static int mtk_mmsys_reset(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	int ret;
+
+	ret = mtk_mmsys_reset_assert(rcdev, id);
+	if (ret)
+		return ret;
+
+	usleep_range(1000, 1100);
+
+	return mtk_mmsys_reset_deassert(rcdev, id);
+}
+
+static const struct reset_control_ops mtk_mmsys_reset_ops = {
+	.assert = mtk_mmsys_reset_assert,
+	.deassert = mtk_mmsys_reset_deassert,
+	.reset = mtk_mmsys_reset,
+};
+
 static int mtk_mmsys_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -111,6 +168,18 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	spin_lock_init(&mmsys->lock);
+
+	mmsys->rcdev.owner = THIS_MODULE;
+	mmsys->rcdev.nr_resets = 32;
+	mmsys->rcdev.ops = &mtk_mmsys_reset_ops;
+	mmsys->rcdev.of_node = pdev->dev.of_node;
+	ret = devm_reset_controller_register(&pdev->dev, &mmsys->rcdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Couldn't register mmsys reset controller: %d\n", ret);
+		return ret;
+	}
+
 	mmsys->data = of_device_get_match_data(&pdev->dev);
 	platform_set_drvdata(pdev, mmsys);
 
diff --git a/drivers/soc/mediatek/mtk-mmsys.h b/drivers/soc/mediatek/mtk-mmsys.h
index 11388961dded..f9f9e12ceab8 100644
--- a/drivers/soc/mediatek/mtk-mmsys.h
+++ b/drivers/soc/mediatek/mtk-mmsys.h
@@ -66,6 +66,8 @@
 #define DPI_SEL_IN_BLS				0x0
 #define DSI_SEL_IN_RDMA				0x1
 
+#define MMSYS_SW0_RST_B				0x140
+
 struct mtk_mmsys_routes {
 	u32 from_comp;
 	u32 to_comp;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 7/7] drm/mediatek: mtk_dsi: Reset the dsi0 hardware

[Enric Balletbo i Serra]

Reset dsi0 HW to default when power on. This prevents to have different
settingbetween the bootloader and the kernel.

As not all Mediatek boards have the reset consumer configured in their
board description, also is not needed on all of them, the reset is optional,
so the change is compatible with all boards.

Cc: Jitao Shi <jitao.shi@mediatek.com>
Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

(no changes since v1)

 drivers/gpu/drm/mediatek/mtk_dsi.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index ae403c67cbd9..d8b81e2ab841 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -11,6 +11,7 @@
 #include <linux/of_platform.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/reset.h>
 
 #include <video/mipi_display.h>
 #include <video/videomode.h>
@@ -980,8 +981,10 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
 	struct mtk_dsi *dsi = dev_get_drvdata(dev);
 
 	ret = mtk_dsi_encoder_init(drm, dsi);
+	if (ret)
+		return ret;
 
-	return ret;
+	return device_reset_optional(dev);
 }
 
 static void mtk_dsi_unbind(struct device *dev, struct device *master,
-- 
2.30.2

[PATCH v2 7/7] drm/mediatek: mtk_dsi: Reset the dsi0 hardware

[Enric Balletbo i Serra]

Reset dsi0 HW to default when power on. This prevents to have different
settingbetween the bootloader and the kernel.

As not all Mediatek boards have the reset consumer configured in their
board description, also is not needed on all of them, the reset is optional,
so the change is compatible with all boards.

Cc: Jitao Shi <jitao.shi@mediatek.com>
Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

(no changes since v1)

 drivers/gpu/drm/mediatek/mtk_dsi.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index ae403c67cbd9..d8b81e2ab841 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -11,6 +11,7 @@
 #include <linux/of_platform.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/reset.h>
 
 #include <video/mipi_display.h>
 #include <video/videomode.h>
@@ -980,8 +981,10 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
 	struct mtk_dsi *dsi = dev_get_drvdata(dev);
 
 	ret = mtk_dsi_encoder_init(drm, dsi);
+	if (ret)
+		return ret;
 
-	return ret;
+	return device_reset_optional(dev);
 }
 
 static void mtk_dsi_unbind(struct device *dev, struct device *master,
-- 
2.30.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 7/7] drm/mediatek: mtk_dsi: Reset the dsi0 hardware

[Enric Balletbo i Serra]

Reset dsi0 HW to default when power on. This prevents to have different
settingbetween the bootloader and the kernel.

As not all Mediatek boards have the reset consumer configured in their
board description, also is not needed on all of them, the reset is optional,
so the change is compatible with all boards.

Cc: Jitao Shi <jitao.shi@mediatek.com>
Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

(no changes since v1)

 drivers/gpu/drm/mediatek/mtk_dsi.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index ae403c67cbd9..d8b81e2ab841 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -11,6 +11,7 @@
 #include <linux/of_platform.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/reset.h>
 
 #include <video/mipi_display.h>
 #include <video/videomode.h>
@@ -980,8 +981,10 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
 	struct mtk_dsi *dsi = dev_get_drvdata(dev);
 
 	ret = mtk_dsi_encoder_init(drm, dsi);
+	if (ret)
+		return ret;
 
-	return ret;
+	return device_reset_optional(dev);
 }
 
 static void mtk_dsi_unbind(struct device *dev, struct device *master,
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 7/7] drm/mediatek: mtk_dsi: Reset the dsi0 hardware

[Enric Balletbo i Serra]

Reset dsi0 HW to default when power on. This prevents to have different
settingbetween the bootloader and the kernel.

As not all Mediatek boards have the reset consumer configured in their
board description, also is not needed on all of them, the reset is optional,
so the change is compatible with all boards.

Cc: Jitao Shi <jitao.shi@mediatek.com>
Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

(no changes since v1)

 drivers/gpu/drm/mediatek/mtk_dsi.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index ae403c67cbd9..d8b81e2ab841 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -11,6 +11,7 @@
 #include <linux/of_platform.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/reset.h>
 
 #include <video/mipi_display.h>
 #include <video/videomode.h>
@@ -980,8 +981,10 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
 	struct mtk_dsi *dsi = dev_get_drvdata(dev);
 
 	ret = mtk_dsi_encoder_init(drm, dsi);
+	if (ret)
+		return ret;
 
-	return ret;
+	return device_reset_optional(dev);
 }
 
 static void mtk_dsi_unbind(struct device *dev, struct device *master,
-- 
2.30.2

Re: [PATCH v2 2/7] dt-bindings: mediatek: Add #reset-cells to mmsys system controller

[Rob Herring]

On Wed, Jul 14, 2021 at 12:11:36PM +0200, Enric Balletbo i Serra wrote:
> The mmsys system controller exposes a set of memory client resets and
> needs to specify the #reset-cells property in order to advertise the
> number of cells needed to describe each of the resets.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> 
> (no changes since v1)
> 
>  .../devicetree/bindings/arm/mediatek/mediatek,mmsys.txt         | 2 ++
>  1 file changed, 2 insertions(+)

This will conflict. There's already multiple patches converting this to 
schema[1][2].

Rob

[1] https://lore.kernel.org/lkml/20210519161847.3747352-1-fparent@baylibre.com/
[2] https://lore.kernel.org/lkml/CAC=S1nhi0rLpQznvUP1FVNtEDzdffFG_aMO7j-w4fHBY8ceJnw@mail.gmail.com/

Re: [PATCH v2 2/7] dt-bindings: mediatek: Add #reset-cells to mmsys system controller

[Rob Herring]

On Wed, Jul 14, 2021 at 12:11:36PM +0200, Enric Balletbo i Serra wrote:
> The mmsys system controller exposes a set of memory client resets and
> needs to specify the #reset-cells property in order to advertise the
> number of cells needed to describe each of the resets.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> 
> (no changes since v1)
> 
>  .../devicetree/bindings/arm/mediatek/mediatek,mmsys.txt         | 2 ++
>  1 file changed, 2 insertions(+)

This will conflict. There's already multiple patches converting this to 
schema[1][2].

Rob

[1] https://lore.kernel.org/lkml/20210519161847.3747352-1-fparent@baylibre.com/
[2] https://lore.kernel.org/lkml/CAC=S1nhi0rLpQznvUP1FVNtEDzdffFG_aMO7j-w4fHBY8ceJnw@mail.gmail.com/

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 2/7] dt-bindings: mediatek: Add #reset-cells to mmsys system controller

[Rob Herring]

On Wed, Jul 14, 2021 at 12:11:36PM +0200, Enric Balletbo i Serra wrote:
> The mmsys system controller exposes a set of memory client resets and
> needs to specify the #reset-cells property in order to advertise the
> number of cells needed to describe each of the resets.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> 
> (no changes since v1)
> 
>  .../devicetree/bindings/arm/mediatek/mediatek,mmsys.txt         | 2 ++
>  1 file changed, 2 insertions(+)

This will conflict. There's already multiple patches converting this to 
schema[1][2].

Rob

[1] https://lore.kernel.org/lkml/20210519161847.3747352-1-fparent@baylibre.com/
[2] https://lore.kernel.org/lkml/CAC=S1nhi0rLpQznvUP1FVNtEDzdffFG_aMO7j-w4fHBY8ceJnw@mail.gmail.com/

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 3/7] dt-bindings: display: mediatek: add dsi reset optional property

[Rob Herring]

On Wed, 14 Jul 2021 12:11:37 +0200, Enric Balletbo i Serra wrote:
> Update device tree binding documentation for the dsi to add the optional
> property to reset the dsi controller.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> 
> Changes in v2:
> - Added a new patch to describe the dsi reset optional property.
> 
>  .../devicetree/bindings/display/mediatek/mediatek,dsi.txt   | 6 ++++++
>  1 file changed, 6 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 3/7] dt-bindings: display: mediatek: add dsi reset optional property

[Rob Herring]

On Wed, 14 Jul 2021 12:11:37 +0200, Enric Balletbo i Serra wrote:
> Update device tree binding documentation for the dsi to add the optional
> property to reset the dsi controller.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> 
> Changes in v2:
> - Added a new patch to describe the dsi reset optional property.
> 
>  .../devicetree/bindings/display/mediatek/mediatek,dsi.txt   | 6 ++++++
>  1 file changed, 6 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 3/7] dt-bindings: display: mediatek: add dsi reset optional property

[Rob Herring]

On Wed, 14 Jul 2021 12:11:37 +0200, Enric Balletbo i Serra wrote:
> Update device tree binding documentation for the dsi to add the optional
> property to reset the dsi controller.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> 
> Changes in v2:
> - Added a new patch to describe the dsi reset optional property.
> 
>  .../devicetree/bindings/display/mediatek/mediatek,dsi.txt   | 6 ++++++
>  1 file changed, 6 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 3/7] dt-bindings: display: mediatek: add dsi reset optional property

[Rob Herring]

On Wed, 14 Jul 2021 12:11:37 +0200, Enric Balletbo i Serra wrote:
> Update device tree binding documentation for the dsi to add the optional
> property to reset the dsi controller.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> 
> Changes in v2:
> - Added a new patch to describe the dsi reset optional property.
> 
>  .../devicetree/bindings/display/mediatek/mediatek,dsi.txt   | 6 ++++++
>  1 file changed, 6 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 4/7] arm64: dts: mt8173: Add the mmsys reset bit to reset the dsi0

[Rob Herring]

On Wed, 14 Jul 2021 12:11:38 +0200, Enric Balletbo i Serra wrote:
> Reset the DSI hardware is needed to prevent different settings between
> the bootloader and the kernel.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> 
> (no changes since v1)
> 
>  arch/arm64/boot/dts/mediatek/mt8173.dtsi  | 2 ++
>  include/dt-bindings/reset/mt8173-resets.h | 2 ++
>  2 files changed, 4 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 4/7] arm64: dts: mt8173: Add the mmsys reset bit to reset the dsi0

[Rob Herring]

On Wed, 14 Jul 2021 12:11:38 +0200, Enric Balletbo i Serra wrote:
> Reset the DSI hardware is needed to prevent different settings between
> the bootloader and the kernel.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> 
> (no changes since v1)
> 
>  arch/arm64/boot/dts/mediatek/mt8173.dtsi  | 2 ++
>  include/dt-bindings/reset/mt8173-resets.h | 2 ++
>  2 files changed, 4 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 4/7] arm64: dts: mt8173: Add the mmsys reset bit to reset the dsi0

[Rob Herring]

On Wed, 14 Jul 2021 12:11:38 +0200, Enric Balletbo i Serra wrote:
> Reset the DSI hardware is needed to prevent different settings between
> the bootloader and the kernel.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> 
> (no changes since v1)
> 
>  arch/arm64/boot/dts/mediatek/mt8173.dtsi  | 2 ++
>  include/dt-bindings/reset/mt8173-resets.h | 2 ++
>  2 files changed, 4 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 5/7] arm64: dts: mt8183: Add the mmsys reset bit to reset the dsi0

[Rob Herring]

On Wed, 14 Jul 2021 12:11:39 +0200, Enric Balletbo i Serra wrote:
> Reset the DSI hardware is needed to prevent different settings between
> the bootloader and the kernel.
> 
> While here, also remove the undocumented and also not used
> 'mediatek,syscon-dsi' property.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> 
> (no changes since v1)
> 
>  arch/arm64/boot/dts/mediatek/mt8183.dtsi  | 3 ++-
>  include/dt-bindings/reset/mt8183-resets.h | 3 +++
>  2 files changed, 5 insertions(+), 1 deletion(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 5/7] arm64: dts: mt8183: Add the mmsys reset bit to reset the dsi0

[Rob Herring]

On Wed, 14 Jul 2021 12:11:39 +0200, Enric Balletbo i Serra wrote:
> Reset the DSI hardware is needed to prevent different settings between
> the bootloader and the kernel.
> 
> While here, also remove the undocumented and also not used
> 'mediatek,syscon-dsi' property.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> 
> (no changes since v1)
> 
>  arch/arm64/boot/dts/mediatek/mt8183.dtsi  | 3 ++-
>  include/dt-bindings/reset/mt8183-resets.h | 3 +++
>  2 files changed, 5 insertions(+), 1 deletion(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 5/7] arm64: dts: mt8183: Add the mmsys reset bit to reset the dsi0

[Rob Herring]

On Wed, 14 Jul 2021 12:11:39 +0200, Enric Balletbo i Serra wrote:
> Reset the DSI hardware is needed to prevent different settings between
> the bootloader and the kernel.
> 
> While here, also remove the undocumented and also not used
> 'mediatek,syscon-dsi' property.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> 
> (no changes since v1)
> 
>  arch/arm64/boot/dts/mediatek/mt8183.dtsi  | 3 ++-
>  include/dt-bindings/reset/mt8183-resets.h | 3 +++
>  2 files changed, 5 insertions(+), 1 deletion(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 6/7] soc: mediatek: mmsys: Add reset controller support

[Philipp Zabel]

Hi Enric,

On Wed, 2021-07-14 at 12:11 +0200, Enric Balletbo i Serra wrote:
> Among other features the mmsys driver should implement a reset
> controller to be able to reset different bits from their space.
> 
> Cc: Jitao Shi <jitao.shi@mediatek.com>
> Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

The reset controller driver looks fine, just two questions below.

> ---
> 
> (no changes since v1)
> 
>  drivers/soc/mediatek/mtk-mmsys.c | 69 ++++++++++++++++++++++++++++++++
>  drivers/soc/mediatek/mtk-mmsys.h |  2 +
>  2 files changed, 71 insertions(+)
> 
> diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
> index e681029fe804..6ac4deff0164 100644
> --- a/drivers/soc/mediatek/mtk-mmsys.c
> +++ b/drivers/soc/mediatek/mtk-mmsys.c
[...]
> @@ -91,6 +95,59 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
[...]
> +static int mtk_mmsys_reset(struct reset_controller_dev *rcdev, unsigned long id)
> +{
> +	int ret;
> +
> +	ret = mtk_mmsys_reset_assert(rcdev, id);
> +	if (ret)
> +		return ret;
> +
> +	usleep_range(1000, 1100);

Is this known to be enough for all IP cores that can be reset by this
controller?

> +	return mtk_mmsys_reset_deassert(rcdev, id);
> +}
> +
> +static const struct reset_control_ops mtk_mmsys_reset_ops = {
> +	.assert = mtk_mmsys_reset_assert,
> +	.deassert = mtk_mmsys_reset_deassert,
> +	.reset = mtk_mmsys_reset,
> +};
> +
>  static int mtk_mmsys_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -111,6 +168,18 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>  
> +	spin_lock_init(&mmsys->lock);
> +
> +	mmsys->rcdev.owner = THIS_MODULE;
> +	mmsys->rcdev.nr_resets = 32;

Are all bits in the MMSYS_SW0_RST_B register individual reset controls?

regards
Philipp

Re: [PATCH v2 6/7] soc: mediatek: mmsys: Add reset controller support

[Philipp Zabel]

Hi Enric,

On Wed, 2021-07-14 at 12:11 +0200, Enric Balletbo i Serra wrote:
> Among other features the mmsys driver should implement a reset
> controller to be able to reset different bits from their space.
> 
> Cc: Jitao Shi <jitao.shi@mediatek.com>
> Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

The reset controller driver looks fine, just two questions below.

> ---
> 
> (no changes since v1)
> 
>  drivers/soc/mediatek/mtk-mmsys.c | 69 ++++++++++++++++++++++++++++++++
>  drivers/soc/mediatek/mtk-mmsys.h |  2 +
>  2 files changed, 71 insertions(+)
> 
> diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
> index e681029fe804..6ac4deff0164 100644
> --- a/drivers/soc/mediatek/mtk-mmsys.c
> +++ b/drivers/soc/mediatek/mtk-mmsys.c
[...]
> @@ -91,6 +95,59 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
[...]
> +static int mtk_mmsys_reset(struct reset_controller_dev *rcdev, unsigned long id)
> +{
> +	int ret;
> +
> +	ret = mtk_mmsys_reset_assert(rcdev, id);
> +	if (ret)
> +		return ret;
> +
> +	usleep_range(1000, 1100);

Is this known to be enough for all IP cores that can be reset by this
controller?

> +	return mtk_mmsys_reset_deassert(rcdev, id);
> +}
> +
> +static const struct reset_control_ops mtk_mmsys_reset_ops = {
> +	.assert = mtk_mmsys_reset_assert,
> +	.deassert = mtk_mmsys_reset_deassert,
> +	.reset = mtk_mmsys_reset,
> +};
> +
>  static int mtk_mmsys_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -111,6 +168,18 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>  
> +	spin_lock_init(&mmsys->lock);
> +
> +	mmsys->rcdev.owner = THIS_MODULE;
> +	mmsys->rcdev.nr_resets = 32;

Are all bits in the MMSYS_SW0_RST_B register individual reset controls?

regards
Philipp

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 6/7] soc: mediatek: mmsys: Add reset controller support

[Philipp Zabel]

Hi Enric,

On Wed, 2021-07-14 at 12:11 +0200, Enric Balletbo i Serra wrote:
> Among other features the mmsys driver should implement a reset
> controller to be able to reset different bits from their space.
> 
> Cc: Jitao Shi <jitao.shi@mediatek.com>
> Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

The reset controller driver looks fine, just two questions below.

> ---
> 
> (no changes since v1)
> 
>  drivers/soc/mediatek/mtk-mmsys.c | 69 ++++++++++++++++++++++++++++++++
>  drivers/soc/mediatek/mtk-mmsys.h |  2 +
>  2 files changed, 71 insertions(+)
> 
> diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
> index e681029fe804..6ac4deff0164 100644
> --- a/drivers/soc/mediatek/mtk-mmsys.c
> +++ b/drivers/soc/mediatek/mtk-mmsys.c
[...]
> @@ -91,6 +95,59 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
[...]
> +static int mtk_mmsys_reset(struct reset_controller_dev *rcdev, unsigned long id)
> +{
> +	int ret;
> +
> +	ret = mtk_mmsys_reset_assert(rcdev, id);
> +	if (ret)
> +		return ret;
> +
> +	usleep_range(1000, 1100);

Is this known to be enough for all IP cores that can be reset by this
controller?

> +	return mtk_mmsys_reset_deassert(rcdev, id);
> +}
> +
> +static const struct reset_control_ops mtk_mmsys_reset_ops = {
> +	.assert = mtk_mmsys_reset_assert,
> +	.deassert = mtk_mmsys_reset_deassert,
> +	.reset = mtk_mmsys_reset,
> +};
> +
>  static int mtk_mmsys_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -111,6 +168,18 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>  
> +	spin_lock_init(&mmsys->lock);
> +
> +	mmsys->rcdev.owner = THIS_MODULE;
> +	mmsys->rcdev.nr_resets = 32;

Are all bits in the MMSYS_SW0_RST_B register individual reset controls?

regards
Philipp

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 6/7] soc: mediatek: mmsys: Add reset controller support

[Enric Balletbo i Serra]

Hi Philipp,

Thank you to take a look

On 20/7/21 12:52, Philipp Zabel wrote:
> Hi Enric,
> 
> On Wed, 2021-07-14 at 12:11 +0200, Enric Balletbo i Serra wrote:
>> Among other features the mmsys driver should implement a reset
>> controller to be able to reset different bits from their space.
>>
>> Cc: Jitao Shi <jitao.shi@mediatek.com>
>> Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> 
> The reset controller driver looks fine, just two questions below.
> 
>> ---
>>
>> (no changes since v1)
>>
>>  drivers/soc/mediatek/mtk-mmsys.c | 69 ++++++++++++++++++++++++++++++++
>>  drivers/soc/mediatek/mtk-mmsys.h |  2 +
>>  2 files changed, 71 insertions(+)
>>
>> diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
>> index e681029fe804..6ac4deff0164 100644
>> --- a/drivers/soc/mediatek/mtk-mmsys.c
>> +++ b/drivers/soc/mediatek/mtk-mmsys.c
> [...]
>> @@ -91,6 +95,59 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
> [...]
>> +static int mtk_mmsys_reset(struct reset_controller_dev *rcdev, unsigned long id)
>> +{
>> +	int ret;
>> +
>> +	ret = mtk_mmsys_reset_assert(rcdev, id);
>> +	if (ret)
>> +		return ret;
>> +
>> +	usleep_range(1000, 1100);
> 
> Is this known to be enough for all IP cores that can be reset by this
> controller?
> 

This time is copied from the downstream kernel, so, tbh, I am not totally sure
is enough or needed. Let me try to reach the Mediatek people for if they can
answer this.


>> +	return mtk_mmsys_reset_deassert(rcdev, id);
>> +}
>> +
>> +static const struct reset_control_ops mtk_mmsys_reset_ops = {
>> +	.assert = mtk_mmsys_reset_assert,
>> +	.deassert = mtk_mmsys_reset_deassert,
>> +	.reset = mtk_mmsys_reset,
>> +};
>> +
>>  static int mtk_mmsys_probe(struct platform_device *pdev)
>>  {
>>  	struct device *dev = &pdev->dev;
>> @@ -111,6 +168,18 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
>>  		return ret;
>>  	}
>>  
>> +	spin_lock_init(&mmsys->lock);
>> +
>> +	mmsys->rcdev.owner = THIS_MODULE;
>> +	mmsys->rcdev.nr_resets = 32;
> 
> Are all bits in the MMSYS_SW0_RST_B register individual reset controls?

Yes, all are individual reset controls, mostly related to display but not all
(i.e dsi, dpi ...)

Thanks,
  Enric

> 
> regards
> Philipp
> 

Re: [PATCH v2 6/7] soc: mediatek: mmsys: Add reset controller support

[Enric Balletbo i Serra]

Hi Philipp,

Thank you to take a look

On 20/7/21 12:52, Philipp Zabel wrote:
> Hi Enric,
> 
> On Wed, 2021-07-14 at 12:11 +0200, Enric Balletbo i Serra wrote:
>> Among other features the mmsys driver should implement a reset
>> controller to be able to reset different bits from their space.
>>
>> Cc: Jitao Shi <jitao.shi@mediatek.com>
>> Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> 
> The reset controller driver looks fine, just two questions below.
> 
>> ---
>>
>> (no changes since v1)
>>
>>  drivers/soc/mediatek/mtk-mmsys.c | 69 ++++++++++++++++++++++++++++++++
>>  drivers/soc/mediatek/mtk-mmsys.h |  2 +
>>  2 files changed, 71 insertions(+)
>>
>> diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
>> index e681029fe804..6ac4deff0164 100644
>> --- a/drivers/soc/mediatek/mtk-mmsys.c
>> +++ b/drivers/soc/mediatek/mtk-mmsys.c
> [...]
>> @@ -91,6 +95,59 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
> [...]
>> +static int mtk_mmsys_reset(struct reset_controller_dev *rcdev, unsigned long id)
>> +{
>> +	int ret;
>> +
>> +	ret = mtk_mmsys_reset_assert(rcdev, id);
>> +	if (ret)
>> +		return ret;
>> +
>> +	usleep_range(1000, 1100);
> 
> Is this known to be enough for all IP cores that can be reset by this
> controller?
> 

This time is copied from the downstream kernel, so, tbh, I am not totally sure
is enough or needed. Let me try to reach the Mediatek people for if they can
answer this.


>> +	return mtk_mmsys_reset_deassert(rcdev, id);
>> +}
>> +
>> +static const struct reset_control_ops mtk_mmsys_reset_ops = {
>> +	.assert = mtk_mmsys_reset_assert,
>> +	.deassert = mtk_mmsys_reset_deassert,
>> +	.reset = mtk_mmsys_reset,
>> +};
>> +
>>  static int mtk_mmsys_probe(struct platform_device *pdev)
>>  {
>>  	struct device *dev = &pdev->dev;
>> @@ -111,6 +168,18 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
>>  		return ret;
>>  	}
>>  
>> +	spin_lock_init(&mmsys->lock);
>> +
>> +	mmsys->rcdev.owner = THIS_MODULE;
>> +	mmsys->rcdev.nr_resets = 32;
> 
> Are all bits in the MMSYS_SW0_RST_B register individual reset controls?

Yes, all are individual reset controls, mostly related to display but not all
(i.e dsi, dpi ...)

Thanks,
  Enric

> 
> regards
> Philipp
> 

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 6/7] soc: mediatek: mmsys: Add reset controller support

[Enric Balletbo i Serra]

Hi Philipp,

Thank you to take a look

On 20/7/21 12:52, Philipp Zabel wrote:
> Hi Enric,
> 
> On Wed, 2021-07-14 at 12:11 +0200, Enric Balletbo i Serra wrote:
>> Among other features the mmsys driver should implement a reset
>> controller to be able to reset different bits from their space.
>>
>> Cc: Jitao Shi <jitao.shi@mediatek.com>
>> Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> 
> The reset controller driver looks fine, just two questions below.
> 
>> ---
>>
>> (no changes since v1)
>>
>>  drivers/soc/mediatek/mtk-mmsys.c | 69 ++++++++++++++++++++++++++++++++
>>  drivers/soc/mediatek/mtk-mmsys.h |  2 +
>>  2 files changed, 71 insertions(+)
>>
>> diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
>> index e681029fe804..6ac4deff0164 100644
>> --- a/drivers/soc/mediatek/mtk-mmsys.c
>> +++ b/drivers/soc/mediatek/mtk-mmsys.c
> [...]
>> @@ -91,6 +95,59 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
> [...]
>> +static int mtk_mmsys_reset(struct reset_controller_dev *rcdev, unsigned long id)
>> +{
>> +	int ret;
>> +
>> +	ret = mtk_mmsys_reset_assert(rcdev, id);
>> +	if (ret)
>> +		return ret;
>> +
>> +	usleep_range(1000, 1100);
> 
> Is this known to be enough for all IP cores that can be reset by this
> controller?
> 

This time is copied from the downstream kernel, so, tbh, I am not totally sure
is enough or needed. Let me try to reach the Mediatek people for if they can
answer this.


>> +	return mtk_mmsys_reset_deassert(rcdev, id);
>> +}
>> +
>> +static const struct reset_control_ops mtk_mmsys_reset_ops = {
>> +	.assert = mtk_mmsys_reset_assert,
>> +	.deassert = mtk_mmsys_reset_deassert,
>> +	.reset = mtk_mmsys_reset,
>> +};
>> +
>>  static int mtk_mmsys_probe(struct platform_device *pdev)
>>  {
>>  	struct device *dev = &pdev->dev;
>> @@ -111,6 +168,18 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
>>  		return ret;
>>  	}
>>  
>> +	spin_lock_init(&mmsys->lock);
>> +
>> +	mmsys->rcdev.owner = THIS_MODULE;
>> +	mmsys->rcdev.nr_resets = 32;
> 
> Are all bits in the MMSYS_SW0_RST_B register individual reset controls?

Yes, all are individual reset controls, mostly related to display but not all
(i.e dsi, dpi ...)

Thanks,
  Enric

> 
> regards
> Philipp
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 6/7] soc: mediatek: mmsys: Add reset controller support

[Philipp Zabel]

On Tue, 2021-07-20 at 19:07 +0200, Enric Balletbo i Serra wrote:
> Hi Philipp,
> 
> Thank you to take a look
> 
> On 20/7/21 12:52, Philipp Zabel wrote:
> > Hi Enric,
> > 
> > On Wed, 2021-07-14 at 12:11 +0200, Enric Balletbo i Serra wrote:
> > > Among other features the mmsys driver should implement a reset
> > > controller to be able to reset different bits from their space.
> > > 
> > > Cc: Jitao Shi <jitao.shi@mediatek.com>
> > > Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> > 
> > The reset controller driver looks fine, just two questions below.
> > 
> > > ---
> > > 
> > > (no changes since v1)
> > > 
> > >  drivers/soc/mediatek/mtk-mmsys.c | 69 ++++++++++++++++++++++++++++++++
> > >  drivers/soc/mediatek/mtk-mmsys.h |  2 +
> > >  2 files changed, 71 insertions(+)
> > > 
> > > diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
> > > index e681029fe804..6ac4deff0164 100644
> > > --- a/drivers/soc/mediatek/mtk-mmsys.c
> > > +++ b/drivers/soc/mediatek/mtk-mmsys.c
> > [...]
> > > @@ -91,6 +95,59 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
> > [...]
> > > +static int mtk_mmsys_reset(struct reset_controller_dev *rcdev, unsigned long id)
> > > +{
> > > +	int ret;
> > > +
> > > +	ret = mtk_mmsys_reset_assert(rcdev, id);
> > > +	if (ret)
> > > +		return ret;
> > > +
> > > +	usleep_range(1000, 1100);
> > 
> > Is this known to be enough for all IP cores that can be reset by this
> > controller?
> > 
> 
> This time is copied from the downstream kernel, so, tbh, I am not totally sure
> is enough or needed. Let me try to reach the Mediatek people for if they can
> answer this.

That would be great. When this is resolved either way, feel free to add

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>

regards
Philipp

Re: [PATCH v2 6/7] soc: mediatek: mmsys: Add reset controller support

[Philipp Zabel]

On Tue, 2021-07-20 at 19:07 +0200, Enric Balletbo i Serra wrote:
> Hi Philipp,
> 
> Thank you to take a look
> 
> On 20/7/21 12:52, Philipp Zabel wrote:
> > Hi Enric,
> > 
> > On Wed, 2021-07-14 at 12:11 +0200, Enric Balletbo i Serra wrote:
> > > Among other features the mmsys driver should implement a reset
> > > controller to be able to reset different bits from their space.
> > > 
> > > Cc: Jitao Shi <jitao.shi@mediatek.com>
> > > Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> > 
> > The reset controller driver looks fine, just two questions below.
> > 
> > > ---
> > > 
> > > (no changes since v1)
> > > 
> > >  drivers/soc/mediatek/mtk-mmsys.c | 69 ++++++++++++++++++++++++++++++++
> > >  drivers/soc/mediatek/mtk-mmsys.h |  2 +
> > >  2 files changed, 71 insertions(+)
> > > 
> > > diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
> > > index e681029fe804..6ac4deff0164 100644
> > > --- a/drivers/soc/mediatek/mtk-mmsys.c
> > > +++ b/drivers/soc/mediatek/mtk-mmsys.c
> > [...]
> > > @@ -91,6 +95,59 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
> > [...]
> > > +static int mtk_mmsys_reset(struct reset_controller_dev *rcdev, unsigned long id)
> > > +{
> > > +	int ret;
> > > +
> > > +	ret = mtk_mmsys_reset_assert(rcdev, id);
> > > +	if (ret)
> > > +		return ret;
> > > +
> > > +	usleep_range(1000, 1100);
> > 
> > Is this known to be enough for all IP cores that can be reset by this
> > controller?
> > 
> 
> This time is copied from the downstream kernel, so, tbh, I am not totally sure
> is enough or needed. Let me try to reach the Mediatek people for if they can
> answer this.

That would be great. When this is resolved either way, feel free to add

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>

regards
Philipp

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 6/7] soc: mediatek: mmsys: Add reset controller support

[Philipp Zabel]

On Tue, 2021-07-20 at 19:07 +0200, Enric Balletbo i Serra wrote:
> Hi Philipp,
> 
> Thank you to take a look
> 
> On 20/7/21 12:52, Philipp Zabel wrote:
> > Hi Enric,
> > 
> > On Wed, 2021-07-14 at 12:11 +0200, Enric Balletbo i Serra wrote:
> > > Among other features the mmsys driver should implement a reset
> > > controller to be able to reset different bits from their space.
> > > 
> > > Cc: Jitao Shi <jitao.shi@mediatek.com>
> > > Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> > 
> > The reset controller driver looks fine, just two questions below.
> > 
> > > ---
> > > 
> > > (no changes since v1)
> > > 
> > >  drivers/soc/mediatek/mtk-mmsys.c | 69 ++++++++++++++++++++++++++++++++
> > >  drivers/soc/mediatek/mtk-mmsys.h |  2 +
> > >  2 files changed, 71 insertions(+)
> > > 
> > > diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
> > > index e681029fe804..6ac4deff0164 100644
> > > --- a/drivers/soc/mediatek/mtk-mmsys.c
> > > +++ b/drivers/soc/mediatek/mtk-mmsys.c
> > [...]
> > > @@ -91,6 +95,59 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
> > [...]
> > > +static int mtk_mmsys_reset(struct reset_controller_dev *rcdev, unsigned long id)
> > > +{
> > > +	int ret;
> > > +
> > > +	ret = mtk_mmsys_reset_assert(rcdev, id);
> > > +	if (ret)
> > > +		return ret;
> > > +
> > > +	usleep_range(1000, 1100);
> > 
> > Is this known to be enough for all IP cores that can be reset by this
> > controller?
> > 
> 
> This time is copied from the downstream kernel, so, tbh, I am not totally sure
> is enough or needed. Let me try to reach the Mediatek people for if they can
> answer this.

That would be great. When this is resolved either way, feel free to add

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>

regards
Philipp

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 1/7] arm64: dts: mediatek: Move reset controller constants into common location

[Guenter Roeck]

On Wed, Jul 14, 2021 at 12:11:35PM +0200, Enric Balletbo i Serra wrote:
> The DT binding includes for reset controllers are located in
> include/dt-bindings/reset/. Move the Mediatek reset constants in there.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

For the watchdog part:

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
> 
> Changes in v2:
> - Fix build test ERROR Reported-by: kernel test robot <lkp@intel.com>
> 
>  arch/arm64/boot/dts/mediatek/mt8183.dtsi                    | 2 +-
>  drivers/watchdog/mtk_wdt.c                                  | 6 +++---
>  .../dt-bindings/{reset-controller => reset}/mt2712-resets.h | 0
>  .../dt-bindings/{reset-controller => reset}/mt8183-resets.h | 0
>  .../dt-bindings/{reset-controller => reset}/mt8192-resets.h | 0
>  5 files changed, 4 insertions(+), 4 deletions(-)
>  rename include/dt-bindings/{reset-controller => reset}/mt2712-resets.h (100%)
>  rename include/dt-bindings/{reset-controller => reset}/mt8183-resets.h (100%)
>  rename include/dt-bindings/{reset-controller => reset}/mt8192-resets.h (100%)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 96473d88f391..4ef0b5b23047 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -11,7 +11,7 @@
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/memory/mt8183-larb-port.h>
>  #include <dt-bindings/power/mt8183-power.h>
> -#include <dt-bindings/reset-controller/mt8183-resets.h>
> +#include <dt-bindings/reset/mt8183-resets.h>
>  #include <dt-bindings/phy/phy.h>
>  #include <dt-bindings/thermal/thermal.h>
>  #include "mt8183-pinfunc.h"
> diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
> index 16b6aff324a7..6986bc740465 100644
> --- a/drivers/watchdog/mtk_wdt.c
> +++ b/drivers/watchdog/mtk_wdt.c
> @@ -9,9 +9,9 @@
>   * Based on sunxi_wdt.c
>   */
>  
> -#include <dt-bindings/reset-controller/mt2712-resets.h>
> -#include <dt-bindings/reset-controller/mt8183-resets.h>
> -#include <dt-bindings/reset-controller/mt8192-resets.h>
> +#include <dt-bindings/reset/mt2712-resets.h>
> +#include <dt-bindings/reset/mt8183-resets.h>
> +#include <dt-bindings/reset/mt8192-resets.h>
>  #include <linux/delay.h>
>  #include <linux/err.h>
>  #include <linux/init.h>
> diff --git a/include/dt-bindings/reset-controller/mt2712-resets.h b/include/dt-bindings/reset/mt2712-resets.h
> similarity index 100%
> rename from include/dt-bindings/reset-controller/mt2712-resets.h
> rename to include/dt-bindings/reset/mt2712-resets.h
> diff --git a/include/dt-bindings/reset-controller/mt8183-resets.h b/include/dt-bindings/reset/mt8183-resets.h
> similarity index 100%
> rename from include/dt-bindings/reset-controller/mt8183-resets.h
> rename to include/dt-bindings/reset/mt8183-resets.h
> diff --git a/include/dt-bindings/reset-controller/mt8192-resets.h b/include/dt-bindings/reset/mt8192-resets.h
> similarity index 100%
> rename from include/dt-bindings/reset-controller/mt8192-resets.h
> rename to include/dt-bindings/reset/mt8192-resets.h

Re: [PATCH v2 1/7] arm64: dts: mediatek: Move reset controller constants into common location

[Guenter Roeck]

On Wed, Jul 14, 2021 at 12:11:35PM +0200, Enric Balletbo i Serra wrote:
> The DT binding includes for reset controllers are located in
> include/dt-bindings/reset/. Move the Mediatek reset constants in there.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

For the watchdog part:

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
> 
> Changes in v2:
> - Fix build test ERROR Reported-by: kernel test robot <lkp@intel.com>
> 
>  arch/arm64/boot/dts/mediatek/mt8183.dtsi                    | 2 +-
>  drivers/watchdog/mtk_wdt.c                                  | 6 +++---
>  .../dt-bindings/{reset-controller => reset}/mt2712-resets.h | 0
>  .../dt-bindings/{reset-controller => reset}/mt8183-resets.h | 0
>  .../dt-bindings/{reset-controller => reset}/mt8192-resets.h | 0
>  5 files changed, 4 insertions(+), 4 deletions(-)
>  rename include/dt-bindings/{reset-controller => reset}/mt2712-resets.h (100%)
>  rename include/dt-bindings/{reset-controller => reset}/mt8183-resets.h (100%)
>  rename include/dt-bindings/{reset-controller => reset}/mt8192-resets.h (100%)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 96473d88f391..4ef0b5b23047 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -11,7 +11,7 @@
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/memory/mt8183-larb-port.h>
>  #include <dt-bindings/power/mt8183-power.h>
> -#include <dt-bindings/reset-controller/mt8183-resets.h>
> +#include <dt-bindings/reset/mt8183-resets.h>
>  #include <dt-bindings/phy/phy.h>
>  #include <dt-bindings/thermal/thermal.h>
>  #include "mt8183-pinfunc.h"
> diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
> index 16b6aff324a7..6986bc740465 100644
> --- a/drivers/watchdog/mtk_wdt.c
> +++ b/drivers/watchdog/mtk_wdt.c
> @@ -9,9 +9,9 @@
>   * Based on sunxi_wdt.c
>   */
>  
> -#include <dt-bindings/reset-controller/mt2712-resets.h>
> -#include <dt-bindings/reset-controller/mt8183-resets.h>
> -#include <dt-bindings/reset-controller/mt8192-resets.h>
> +#include <dt-bindings/reset/mt2712-resets.h>
> +#include <dt-bindings/reset/mt8183-resets.h>
> +#include <dt-bindings/reset/mt8192-resets.h>
>  #include <linux/delay.h>
>  #include <linux/err.h>
>  #include <linux/init.h>
> diff --git a/include/dt-bindings/reset-controller/mt2712-resets.h b/include/dt-bindings/reset/mt2712-resets.h
> similarity index 100%
> rename from include/dt-bindings/reset-controller/mt2712-resets.h
> rename to include/dt-bindings/reset/mt2712-resets.h
> diff --git a/include/dt-bindings/reset-controller/mt8183-resets.h b/include/dt-bindings/reset/mt8183-resets.h
> similarity index 100%
> rename from include/dt-bindings/reset-controller/mt8183-resets.h
> rename to include/dt-bindings/reset/mt8183-resets.h
> diff --git a/include/dt-bindings/reset-controller/mt8192-resets.h b/include/dt-bindings/reset/mt8192-resets.h
> similarity index 100%
> rename from include/dt-bindings/reset-controller/mt8192-resets.h
> rename to include/dt-bindings/reset/mt8192-resets.h

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 1/7] arm64: dts: mediatek: Move reset controller constants into common location

[Guenter Roeck]

On Wed, Jul 14, 2021 at 12:11:35PM +0200, Enric Balletbo i Serra wrote:
> The DT binding includes for reset controllers are located in
> include/dt-bindings/reset/. Move the Mediatek reset constants in there.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

For the watchdog part:

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
> 
> Changes in v2:
> - Fix build test ERROR Reported-by: kernel test robot <lkp@intel.com>
> 
>  arch/arm64/boot/dts/mediatek/mt8183.dtsi                    | 2 +-
>  drivers/watchdog/mtk_wdt.c                                  | 6 +++---
>  .../dt-bindings/{reset-controller => reset}/mt2712-resets.h | 0
>  .../dt-bindings/{reset-controller => reset}/mt8183-resets.h | 0
>  .../dt-bindings/{reset-controller => reset}/mt8192-resets.h | 0
>  5 files changed, 4 insertions(+), 4 deletions(-)
>  rename include/dt-bindings/{reset-controller => reset}/mt2712-resets.h (100%)
>  rename include/dt-bindings/{reset-controller => reset}/mt8183-resets.h (100%)
>  rename include/dt-bindings/{reset-controller => reset}/mt8192-resets.h (100%)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 96473d88f391..4ef0b5b23047 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -11,7 +11,7 @@
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/memory/mt8183-larb-port.h>
>  #include <dt-bindings/power/mt8183-power.h>
> -#include <dt-bindings/reset-controller/mt8183-resets.h>
> +#include <dt-bindings/reset/mt8183-resets.h>
>  #include <dt-bindings/phy/phy.h>
>  #include <dt-bindings/thermal/thermal.h>
>  #include "mt8183-pinfunc.h"
> diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
> index 16b6aff324a7..6986bc740465 100644
> --- a/drivers/watchdog/mtk_wdt.c
> +++ b/drivers/watchdog/mtk_wdt.c
> @@ -9,9 +9,9 @@
>   * Based on sunxi_wdt.c
>   */
>  
> -#include <dt-bindings/reset-controller/mt2712-resets.h>
> -#include <dt-bindings/reset-controller/mt8183-resets.h>
> -#include <dt-bindings/reset-controller/mt8192-resets.h>
> +#include <dt-bindings/reset/mt2712-resets.h>
> +#include <dt-bindings/reset/mt8183-resets.h>
> +#include <dt-bindings/reset/mt8192-resets.h>
>  #include <linux/delay.h>
>  #include <linux/err.h>
>  #include <linux/init.h>
> diff --git a/include/dt-bindings/reset-controller/mt2712-resets.h b/include/dt-bindings/reset/mt2712-resets.h
> similarity index 100%
> rename from include/dt-bindings/reset-controller/mt2712-resets.h
> rename to include/dt-bindings/reset/mt2712-resets.h
> diff --git a/include/dt-bindings/reset-controller/mt8183-resets.h b/include/dt-bindings/reset/mt8183-resets.h
> similarity index 100%
> rename from include/dt-bindings/reset-controller/mt8183-resets.h
> rename to include/dt-bindings/reset/mt8183-resets.h
> diff --git a/include/dt-bindings/reset-controller/mt8192-resets.h b/include/dt-bindings/reset/mt8192-resets.h
> similarity index 100%
> rename from include/dt-bindings/reset-controller/mt8192-resets.h
> rename to include/dt-bindings/reset/mt8192-resets.h

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 7/7] drm/mediatek: mtk_dsi: Reset the dsi0 hardware

[Chun-Kuang Hu]

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2021年7月14日 週三 下午6:12寫道：
>
> Reset dsi0 HW to default when power on. This prevents to have different
> settingbetween the bootloader and the kernel.
>
> As not all Mediatek boards have the reset consumer configured in their
> board description, also is not needed on all of them, the reset is optional,
> so the change is compatible with all boards.

Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

>
> Cc: Jitao Shi <jitao.shi@mediatek.com>
> Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
>
> (no changes since v1)
>
>  drivers/gpu/drm/mediatek/mtk_dsi.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index ae403c67cbd9..d8b81e2ab841 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -11,6 +11,7 @@
>  #include <linux/of_platform.h>
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
> +#include <linux/reset.h>
>
>  #include <video/mipi_display.h>
>  #include <video/videomode.h>
> @@ -980,8 +981,10 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
>         struct mtk_dsi *dsi = dev_get_drvdata(dev);
>
>         ret = mtk_dsi_encoder_init(drm, dsi);
> +       if (ret)
> +               return ret;
>
> -       return ret;
> +       return device_reset_optional(dev);
>  }
>
>  static void mtk_dsi_unbind(struct device *dev, struct device *master,
> --
> 2.30.2
>

Re: [PATCH v2 7/7] drm/mediatek: mtk_dsi: Reset the dsi0 hardware

[Chun-Kuang Hu]

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2021年7月14日 週三 下午6:12寫道：
>
> Reset dsi0 HW to default when power on. This prevents to have different
> settingbetween the bootloader and the kernel.
>
> As not all Mediatek boards have the reset consumer configured in their
> board description, also is not needed on all of them, the reset is optional,
> so the change is compatible with all boards.

Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

>
> Cc: Jitao Shi <jitao.shi@mediatek.com>
> Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
>
> (no changes since v1)
>
>  drivers/gpu/drm/mediatek/mtk_dsi.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index ae403c67cbd9..d8b81e2ab841 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -11,6 +11,7 @@
>  #include <linux/of_platform.h>
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
> +#include <linux/reset.h>
>
>  #include <video/mipi_display.h>
>  #include <video/videomode.h>
> @@ -980,8 +981,10 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
>         struct mtk_dsi *dsi = dev_get_drvdata(dev);
>
>         ret = mtk_dsi_encoder_init(drm, dsi);
> +       if (ret)
> +               return ret;
>
> -       return ret;
> +       return device_reset_optional(dev);
>  }
>
>  static void mtk_dsi_unbind(struct device *dev, struct device *master,
> --
> 2.30.2
>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 7/7] drm/mediatek: mtk_dsi: Reset the dsi0 hardware

[Chun-Kuang Hu]

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2021年7月14日 週三 下午6:12寫道：
>
> Reset dsi0 HW to default when power on. This prevents to have different
> settingbetween the bootloader and the kernel.
>
> As not all Mediatek boards have the reset consumer configured in their
> board description, also is not needed on all of them, the reset is optional,
> so the change is compatible with all boards.

Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

>
> Cc: Jitao Shi <jitao.shi@mediatek.com>
> Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
>
> (no changes since v1)
>
>  drivers/gpu/drm/mediatek/mtk_dsi.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index ae403c67cbd9..d8b81e2ab841 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -11,6 +11,7 @@
>  #include <linux/of_platform.h>
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
> +#include <linux/reset.h>
>
>  #include <video/mipi_display.h>
>  #include <video/videomode.h>
> @@ -980,8 +981,10 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
>         struct mtk_dsi *dsi = dev_get_drvdata(dev);
>
>         ret = mtk_dsi_encoder_init(drm, dsi);
> +       if (ret)
> +               return ret;
>
> -       return ret;
> +       return device_reset_optional(dev);
>  }
>
>  static void mtk_dsi_unbind(struct device *dev, struct device *master,
> --
> 2.30.2
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 7/7] drm/mediatek: mtk_dsi: Reset the dsi0 hardware

[Chun-Kuang Hu]

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2021年7月14日 週三 下午6:12寫道：
>
> Reset dsi0 HW to default when power on. This prevents to have different
> settingbetween the bootloader and the kernel.
>
> As not all Mediatek boards have the reset consumer configured in their
> board description, also is not needed on all of them, the reset is optional,
> so the change is compatible with all boards.

Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

>
> Cc: Jitao Shi <jitao.shi@mediatek.com>
> Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
>
> (no changes since v1)
>
>  drivers/gpu/drm/mediatek/mtk_dsi.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index ae403c67cbd9..d8b81e2ab841 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -11,6 +11,7 @@
>  #include <linux/of_platform.h>
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
> +#include <linux/reset.h>
>
>  #include <video/mipi_display.h>
>  #include <video/videomode.h>
> @@ -980,8 +981,10 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
>         struct mtk_dsi *dsi = dev_get_drvdata(dev);
>
>         ret = mtk_dsi_encoder_init(drm, dsi);
> +       if (ret)
> +               return ret;
>
> -       return ret;
> +       return device_reset_optional(dev);
>  }
>
>  static void mtk_dsi_unbind(struct device *dev, struct device *master,
> --
> 2.30.2
>

Re: [PATCH v2 1/7] arm64: dts: mediatek: Move reset controller constants into common location

[Matthias Brugger]

On 14/07/2021 12:11, Enric Balletbo i Serra wrote:
> The DT binding includes for reset controllers are located in
> include/dt-bindings/reset/. Move the Mediatek reset constants in there.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>

> ---
> 
> Changes in v2:
> - Fix build test ERROR Reported-by: kernel test robot <lkp@intel.com>
> 
>  arch/arm64/boot/dts/mediatek/mt8183.dtsi                    | 2 +-
>  drivers/watchdog/mtk_wdt.c                                  | 6 +++---
>  .../dt-bindings/{reset-controller => reset}/mt2712-resets.h | 0
>  .../dt-bindings/{reset-controller => reset}/mt8183-resets.h | 0
>  .../dt-bindings/{reset-controller => reset}/mt8192-resets.h | 0
>  5 files changed, 4 insertions(+), 4 deletions(-)
>  rename include/dt-bindings/{reset-controller => reset}/mt2712-resets.h (100%)
>  rename include/dt-bindings/{reset-controller => reset}/mt8183-resets.h (100%)
>  rename include/dt-bindings/{reset-controller => reset}/mt8192-resets.h (100%)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 96473d88f391..4ef0b5b23047 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -11,7 +11,7 @@
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/memory/mt8183-larb-port.h>
>  #include <dt-bindings/power/mt8183-power.h>
> -#include <dt-bindings/reset-controller/mt8183-resets.h>
> +#include <dt-bindings/reset/mt8183-resets.h>
>  #include <dt-bindings/phy/phy.h>
>  #include <dt-bindings/thermal/thermal.h>
>  #include "mt8183-pinfunc.h"
> diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
> index 16b6aff324a7..6986bc740465 100644
> --- a/drivers/watchdog/mtk_wdt.c
> +++ b/drivers/watchdog/mtk_wdt.c
> @@ -9,9 +9,9 @@
>   * Based on sunxi_wdt.c
>   */
>  
> -#include <dt-bindings/reset-controller/mt2712-resets.h>
> -#include <dt-bindings/reset-controller/mt8183-resets.h>
> -#include <dt-bindings/reset-controller/mt8192-resets.h>
> +#include <dt-bindings/reset/mt2712-resets.h>
> +#include <dt-bindings/reset/mt8183-resets.h>
> +#include <dt-bindings/reset/mt8192-resets.h>
>  #include <linux/delay.h>
>  #include <linux/err.h>
>  #include <linux/init.h>
> diff --git a/include/dt-bindings/reset-controller/mt2712-resets.h b/include/dt-bindings/reset/mt2712-resets.h
> similarity index 100%
> rename from include/dt-bindings/reset-controller/mt2712-resets.h
> rename to include/dt-bindings/reset/mt2712-resets.h
> diff --git a/include/dt-bindings/reset-controller/mt8183-resets.h b/include/dt-bindings/reset/mt8183-resets.h
> similarity index 100%
> rename from include/dt-bindings/reset-controller/mt8183-resets.h
> rename to include/dt-bindings/reset/mt8183-resets.h
> diff --git a/include/dt-bindings/reset-controller/mt8192-resets.h b/include/dt-bindings/reset/mt8192-resets.h
> similarity index 100%
> rename from include/dt-bindings/reset-controller/mt8192-resets.h
> rename to include/dt-bindings/reset/mt8192-resets.h
> 

Re: [PATCH v2 1/7] arm64: dts: mediatek: Move reset controller constants into common location

[Matthias Brugger]

On 14/07/2021 12:11, Enric Balletbo i Serra wrote:
> The DT binding includes for reset controllers are located in
> include/dt-bindings/reset/. Move the Mediatek reset constants in there.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>

> ---
> 
> Changes in v2:
> - Fix build test ERROR Reported-by: kernel test robot <lkp@intel.com>
> 
>  arch/arm64/boot/dts/mediatek/mt8183.dtsi                    | 2 +-
>  drivers/watchdog/mtk_wdt.c                                  | 6 +++---
>  .../dt-bindings/{reset-controller => reset}/mt2712-resets.h | 0
>  .../dt-bindings/{reset-controller => reset}/mt8183-resets.h | 0
>  .../dt-bindings/{reset-controller => reset}/mt8192-resets.h | 0
>  5 files changed, 4 insertions(+), 4 deletions(-)
>  rename include/dt-bindings/{reset-controller => reset}/mt2712-resets.h (100%)
>  rename include/dt-bindings/{reset-controller => reset}/mt8183-resets.h (100%)
>  rename include/dt-bindings/{reset-controller => reset}/mt8192-resets.h (100%)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 96473d88f391..4ef0b5b23047 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -11,7 +11,7 @@
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/memory/mt8183-larb-port.h>
>  #include <dt-bindings/power/mt8183-power.h>
> -#include <dt-bindings/reset-controller/mt8183-resets.h>
> +#include <dt-bindings/reset/mt8183-resets.h>
>  #include <dt-bindings/phy/phy.h>
>  #include <dt-bindings/thermal/thermal.h>
>  #include "mt8183-pinfunc.h"
> diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
> index 16b6aff324a7..6986bc740465 100644
> --- a/drivers/watchdog/mtk_wdt.c
> +++ b/drivers/watchdog/mtk_wdt.c
> @@ -9,9 +9,9 @@
>   * Based on sunxi_wdt.c
>   */
>  
> -#include <dt-bindings/reset-controller/mt2712-resets.h>
> -#include <dt-bindings/reset-controller/mt8183-resets.h>
> -#include <dt-bindings/reset-controller/mt8192-resets.h>
> +#include <dt-bindings/reset/mt2712-resets.h>
> +#include <dt-bindings/reset/mt8183-resets.h>
> +#include <dt-bindings/reset/mt8192-resets.h>
>  #include <linux/delay.h>
>  #include <linux/err.h>
>  #include <linux/init.h>
> diff --git a/include/dt-bindings/reset-controller/mt2712-resets.h b/include/dt-bindings/reset/mt2712-resets.h
> similarity index 100%
> rename from include/dt-bindings/reset-controller/mt2712-resets.h
> rename to include/dt-bindings/reset/mt2712-resets.h
> diff --git a/include/dt-bindings/reset-controller/mt8183-resets.h b/include/dt-bindings/reset/mt8183-resets.h
> similarity index 100%
> rename from include/dt-bindings/reset-controller/mt8183-resets.h
> rename to include/dt-bindings/reset/mt8183-resets.h
> diff --git a/include/dt-bindings/reset-controller/mt8192-resets.h b/include/dt-bindings/reset/mt8192-resets.h
> similarity index 100%
> rename from include/dt-bindings/reset-controller/mt8192-resets.h
> rename to include/dt-bindings/reset/mt8192-resets.h
> 

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 1/7] arm64: dts: mediatek: Move reset controller constants into common location

[Matthias Brugger]

On 14/07/2021 12:11, Enric Balletbo i Serra wrote:
> The DT binding includes for reset controllers are located in
> include/dt-bindings/reset/. Move the Mediatek reset constants in there.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>

> ---
> 
> Changes in v2:
> - Fix build test ERROR Reported-by: kernel test robot <lkp@intel.com>
> 
>  arch/arm64/boot/dts/mediatek/mt8183.dtsi                    | 2 +-
>  drivers/watchdog/mtk_wdt.c                                  | 6 +++---
>  .../dt-bindings/{reset-controller => reset}/mt2712-resets.h | 0
>  .../dt-bindings/{reset-controller => reset}/mt8183-resets.h | 0
>  .../dt-bindings/{reset-controller => reset}/mt8192-resets.h | 0
>  5 files changed, 4 insertions(+), 4 deletions(-)
>  rename include/dt-bindings/{reset-controller => reset}/mt2712-resets.h (100%)
>  rename include/dt-bindings/{reset-controller => reset}/mt8183-resets.h (100%)
>  rename include/dt-bindings/{reset-controller => reset}/mt8192-resets.h (100%)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 96473d88f391..4ef0b5b23047 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -11,7 +11,7 @@
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/memory/mt8183-larb-port.h>
>  #include <dt-bindings/power/mt8183-power.h>
> -#include <dt-bindings/reset-controller/mt8183-resets.h>
> +#include <dt-bindings/reset/mt8183-resets.h>
>  #include <dt-bindings/phy/phy.h>
>  #include <dt-bindings/thermal/thermal.h>
>  #include "mt8183-pinfunc.h"
> diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
> index 16b6aff324a7..6986bc740465 100644
> --- a/drivers/watchdog/mtk_wdt.c
> +++ b/drivers/watchdog/mtk_wdt.c
> @@ -9,9 +9,9 @@
>   * Based on sunxi_wdt.c
>   */
>  
> -#include <dt-bindings/reset-controller/mt2712-resets.h>
> -#include <dt-bindings/reset-controller/mt8183-resets.h>
> -#include <dt-bindings/reset-controller/mt8192-resets.h>
> +#include <dt-bindings/reset/mt2712-resets.h>
> +#include <dt-bindings/reset/mt8183-resets.h>
> +#include <dt-bindings/reset/mt8192-resets.h>
>  #include <linux/delay.h>
>  #include <linux/err.h>
>  #include <linux/init.h>
> diff --git a/include/dt-bindings/reset-controller/mt2712-resets.h b/include/dt-bindings/reset/mt2712-resets.h
> similarity index 100%
> rename from include/dt-bindings/reset-controller/mt2712-resets.h
> rename to include/dt-bindings/reset/mt2712-resets.h
> diff --git a/include/dt-bindings/reset-controller/mt8183-resets.h b/include/dt-bindings/reset/mt8183-resets.h
> similarity index 100%
> rename from include/dt-bindings/reset-controller/mt8183-resets.h
> rename to include/dt-bindings/reset/mt8183-resets.h
> diff --git a/include/dt-bindings/reset-controller/mt8192-resets.h b/include/dt-bindings/reset/mt8192-resets.h
> similarity index 100%
> rename from include/dt-bindings/reset-controller/mt8192-resets.h
> rename to include/dt-bindings/reset/mt8192-resets.h
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 7/7] drm/mediatek: mtk_dsi: Reset the dsi0 hardware

[Matthias Brugger]

On 14/07/2021 12:11, Enric Balletbo i Serra wrote:
> Reset dsi0 HW to default when power on. This prevents to have different
> settingbetween the bootloader and the kernel.

settings between the...

> 
> As not all Mediatek boards have the reset consumer configured in their
> board description, also is not needed on all of them, the reset is optional,
> so the change is compatible with all boards.
> 
> Cc: Jitao Shi <jitao.shi@mediatek.com>
> Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>

> ---
> 
> (no changes since v1)
> 
>  drivers/gpu/drm/mediatek/mtk_dsi.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index ae403c67cbd9..d8b81e2ab841 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -11,6 +11,7 @@
>  #include <linux/of_platform.h>
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
> +#include <linux/reset.h>
>  
>  #include <video/mipi_display.h>
>  #include <video/videomode.h>
> @@ -980,8 +981,10 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
>  	struct mtk_dsi *dsi = dev_get_drvdata(dev);
>  
>  	ret = mtk_dsi_encoder_init(drm, dsi);
> +	if (ret)
> +		return ret;
>  
> -	return ret;
> +	return device_reset_optional(dev);
>  }
>  
>  static void mtk_dsi_unbind(struct device *dev, struct device *master,
> 

Re: [PATCH v2 7/7] drm/mediatek: mtk_dsi: Reset the dsi0 hardware

[Matthias Brugger]

On 14/07/2021 12:11, Enric Balletbo i Serra wrote:
> Reset dsi0 HW to default when power on. This prevents to have different
> settingbetween the bootloader and the kernel.

settings between the...

> 
> As not all Mediatek boards have the reset consumer configured in their
> board description, also is not needed on all of them, the reset is optional,
> so the change is compatible with all boards.
> 
> Cc: Jitao Shi <jitao.shi@mediatek.com>
> Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>

> ---
> 
> (no changes since v1)
> 
>  drivers/gpu/drm/mediatek/mtk_dsi.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index ae403c67cbd9..d8b81e2ab841 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -11,6 +11,7 @@
>  #include <linux/of_platform.h>
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
> +#include <linux/reset.h>
>  
>  #include <video/mipi_display.h>
>  #include <video/videomode.h>
> @@ -980,8 +981,10 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
>  	struct mtk_dsi *dsi = dev_get_drvdata(dev);
>  
>  	ret = mtk_dsi_encoder_init(drm, dsi);
> +	if (ret)
> +		return ret;
>  
> -	return ret;
> +	return device_reset_optional(dev);
>  }
>  
>  static void mtk_dsi_unbind(struct device *dev, struct device *master,
> 

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 7/7] drm/mediatek: mtk_dsi: Reset the dsi0 hardware

[Matthias Brugger]

On 14/07/2021 12:11, Enric Balletbo i Serra wrote:
> Reset dsi0 HW to default when power on. This prevents to have different
> settingbetween the bootloader and the kernel.

settings between the...

> 
> As not all Mediatek boards have the reset consumer configured in their
> board description, also is not needed on all of them, the reset is optional,
> so the change is compatible with all boards.
> 
> Cc: Jitao Shi <jitao.shi@mediatek.com>
> Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>

> ---
> 
> (no changes since v1)
> 
>  drivers/gpu/drm/mediatek/mtk_dsi.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index ae403c67cbd9..d8b81e2ab841 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -11,6 +11,7 @@
>  #include <linux/of_platform.h>
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
> +#include <linux/reset.h>
>  
>  #include <video/mipi_display.h>
>  #include <video/videomode.h>
> @@ -980,8 +981,10 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
>  	struct mtk_dsi *dsi = dev_get_drvdata(dev);
>  
>  	ret = mtk_dsi_encoder_init(drm, dsi);
> +	if (ret)
> +		return ret;
>  
> -	return ret;
> +	return device_reset_optional(dev);
>  }
>  
>  static void mtk_dsi_unbind(struct device *dev, struct device *master,
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 6/7] soc: mediatek: mmsys: Add reset controller support

[Matthias Brugger]

On 14/07/2021 12:11, Enric Balletbo i Serra wrote:
> Among other features the mmsys driver should implement a reset
> controller to be able to reset different bits from their space.
> 
> Cc: Jitao Shi <jitao.shi@mediatek.com>
> Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

I'm happy to take this, as soon as we have the updated binding description.

Regards,
Matthias

> ---
> 
> (no changes since v1)
> 
>  drivers/soc/mediatek/mtk-mmsys.c | 69 ++++++++++++++++++++++++++++++++
>  drivers/soc/mediatek/mtk-mmsys.h |  2 +
>  2 files changed, 71 insertions(+)
> 
> diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
> index e681029fe804..6ac4deff0164 100644
> --- a/drivers/soc/mediatek/mtk-mmsys.c
> +++ b/drivers/soc/mediatek/mtk-mmsys.c
> @@ -4,10 +4,12 @@
>   * Author: James Liao <jamesjj.liao@mediatek.com>
>   */
>  
> +#include <linux/delay.h>
>  #include <linux/device.h>
>  #include <linux/io.h>
>  #include <linux/of_device.h>
>  #include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
>  #include <linux/soc/mediatek/mtk-mmsys.h>
>  
>  #include "mtk-mmsys.h"
> @@ -55,6 +57,8 @@ static const struct mtk_mmsys_driver_data mt8183_mmsys_driver_data = {
>  struct mtk_mmsys {
>  	void __iomem *regs;
>  	const struct mtk_mmsys_driver_data *data;
> +	spinlock_t lock; /* protects mmsys_sw_rst_b reg */
> +	struct reset_controller_dev rcdev;
>  };
>  
>  void mtk_mmsys_ddp_connect(struct device *dev,
> @@ -91,6 +95,59 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
>  }
>  EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_disconnect);
>  
> +static int mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned long id,
> +				  bool assert)
> +{
> +	struct mtk_mmsys *mmsys = container_of(rcdev, struct mtk_mmsys, rcdev);
> +	unsigned long flags;
> +	u32 reg;
> +	int i;
> +
> +	spin_lock_irqsave(&mmsys->lock, flags);
> +
> +	reg = readl_relaxed(mmsys->regs + MMSYS_SW0_RST_B);
> +
> +	if (assert)
> +		reg &= ~BIT(id);
> +	else
> +		reg |= BIT(id);
> +
> +	writel_relaxed(reg, mmsys->regs + MMSYS_SW0_RST_B);
> +
> +	spin_unlock_irqrestore(&mmsys->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int mtk_mmsys_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
> +{
> +	return mtk_mmsys_reset_update(rcdev, id, true);
> +}
> +
> +static int mtk_mmsys_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
> +{
> +	return mtk_mmsys_reset_update(rcdev, id, false);
> +}
> +
> +static int mtk_mmsys_reset(struct reset_controller_dev *rcdev, unsigned long id)
> +{
> +	int ret;
> +
> +	ret = mtk_mmsys_reset_assert(rcdev, id);
> +	if (ret)
> +		return ret;
> +
> +	usleep_range(1000, 1100);
> +
> +	return mtk_mmsys_reset_deassert(rcdev, id);
> +}
> +
> +static const struct reset_control_ops mtk_mmsys_reset_ops = {
> +	.assert = mtk_mmsys_reset_assert,
> +	.deassert = mtk_mmsys_reset_deassert,
> +	.reset = mtk_mmsys_reset,
> +};
> +
>  static int mtk_mmsys_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -111,6 +168,18 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>  
> +	spin_lock_init(&mmsys->lock);
> +
> +	mmsys->rcdev.owner = THIS_MODULE;
> +	mmsys->rcdev.nr_resets = 32;
> +	mmsys->rcdev.ops = &mtk_mmsys_reset_ops;
> +	mmsys->rcdev.of_node = pdev->dev.of_node;
> +	ret = devm_reset_controller_register(&pdev->dev, &mmsys->rcdev);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Couldn't register mmsys reset controller: %d\n", ret);
> +		return ret;
> +	}
> +
>  	mmsys->data = of_device_get_match_data(&pdev->dev);
>  	platform_set_drvdata(pdev, mmsys);
>  
> diff --git a/drivers/soc/mediatek/mtk-mmsys.h b/drivers/soc/mediatek/mtk-mmsys.h
> index 11388961dded..f9f9e12ceab8 100644
> --- a/drivers/soc/mediatek/mtk-mmsys.h
> +++ b/drivers/soc/mediatek/mtk-mmsys.h
> @@ -66,6 +66,8 @@
>  #define DPI_SEL_IN_BLS				0x0
>  #define DSI_SEL_IN_RDMA				0x1
>  
> +#define MMSYS_SW0_RST_B				0x140
> +
>  struct mtk_mmsys_routes {
>  	u32 from_comp;
>  	u32 to_comp;
> 

Re: [PATCH v2 6/7] soc: mediatek: mmsys: Add reset controller support

[Matthias Brugger]

On 14/07/2021 12:11, Enric Balletbo i Serra wrote:
> Among other features the mmsys driver should implement a reset
> controller to be able to reset different bits from their space.
> 
> Cc: Jitao Shi <jitao.shi@mediatek.com>
> Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

I'm happy to take this, as soon as we have the updated binding description.

Regards,
Matthias

> ---
> 
> (no changes since v1)
> 
>  drivers/soc/mediatek/mtk-mmsys.c | 69 ++++++++++++++++++++++++++++++++
>  drivers/soc/mediatek/mtk-mmsys.h |  2 +
>  2 files changed, 71 insertions(+)
> 
> diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
> index e681029fe804..6ac4deff0164 100644
> --- a/drivers/soc/mediatek/mtk-mmsys.c
> +++ b/drivers/soc/mediatek/mtk-mmsys.c
> @@ -4,10 +4,12 @@
>   * Author: James Liao <jamesjj.liao@mediatek.com>
>   */
>  
> +#include <linux/delay.h>
>  #include <linux/device.h>
>  #include <linux/io.h>
>  #include <linux/of_device.h>
>  #include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
>  #include <linux/soc/mediatek/mtk-mmsys.h>
>  
>  #include "mtk-mmsys.h"
> @@ -55,6 +57,8 @@ static const struct mtk_mmsys_driver_data mt8183_mmsys_driver_data = {
>  struct mtk_mmsys {
>  	void __iomem *regs;
>  	const struct mtk_mmsys_driver_data *data;
> +	spinlock_t lock; /* protects mmsys_sw_rst_b reg */
> +	struct reset_controller_dev rcdev;
>  };
>  
>  void mtk_mmsys_ddp_connect(struct device *dev,
> @@ -91,6 +95,59 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
>  }
>  EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_disconnect);
>  
> +static int mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned long id,
> +				  bool assert)
> +{
> +	struct mtk_mmsys *mmsys = container_of(rcdev, struct mtk_mmsys, rcdev);
> +	unsigned long flags;
> +	u32 reg;
> +	int i;
> +
> +	spin_lock_irqsave(&mmsys->lock, flags);
> +
> +	reg = readl_relaxed(mmsys->regs + MMSYS_SW0_RST_B);
> +
> +	if (assert)
> +		reg &= ~BIT(id);
> +	else
> +		reg |= BIT(id);
> +
> +	writel_relaxed(reg, mmsys->regs + MMSYS_SW0_RST_B);
> +
> +	spin_unlock_irqrestore(&mmsys->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int mtk_mmsys_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
> +{
> +	return mtk_mmsys_reset_update(rcdev, id, true);
> +}
> +
> +static int mtk_mmsys_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
> +{
> +	return mtk_mmsys_reset_update(rcdev, id, false);
> +}
> +
> +static int mtk_mmsys_reset(struct reset_controller_dev *rcdev, unsigned long id)
> +{
> +	int ret;
> +
> +	ret = mtk_mmsys_reset_assert(rcdev, id);
> +	if (ret)
> +		return ret;
> +
> +	usleep_range(1000, 1100);
> +
> +	return mtk_mmsys_reset_deassert(rcdev, id);
> +}
> +
> +static const struct reset_control_ops mtk_mmsys_reset_ops = {
> +	.assert = mtk_mmsys_reset_assert,
> +	.deassert = mtk_mmsys_reset_deassert,
> +	.reset = mtk_mmsys_reset,
> +};
> +
>  static int mtk_mmsys_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -111,6 +168,18 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>  
> +	spin_lock_init(&mmsys->lock);
> +
> +	mmsys->rcdev.owner = THIS_MODULE;
> +	mmsys->rcdev.nr_resets = 32;
> +	mmsys->rcdev.ops = &mtk_mmsys_reset_ops;
> +	mmsys->rcdev.of_node = pdev->dev.of_node;
> +	ret = devm_reset_controller_register(&pdev->dev, &mmsys->rcdev);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Couldn't register mmsys reset controller: %d\n", ret);
> +		return ret;
> +	}
> +
>  	mmsys->data = of_device_get_match_data(&pdev->dev);
>  	platform_set_drvdata(pdev, mmsys);
>  
> diff --git a/drivers/soc/mediatek/mtk-mmsys.h b/drivers/soc/mediatek/mtk-mmsys.h
> index 11388961dded..f9f9e12ceab8 100644
> --- a/drivers/soc/mediatek/mtk-mmsys.h
> +++ b/drivers/soc/mediatek/mtk-mmsys.h
> @@ -66,6 +66,8 @@
>  #define DPI_SEL_IN_BLS				0x0
>  #define DSI_SEL_IN_RDMA				0x1
>  
> +#define MMSYS_SW0_RST_B				0x140
> +
>  struct mtk_mmsys_routes {
>  	u32 from_comp;
>  	u32 to_comp;
> 

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 6/7] soc: mediatek: mmsys: Add reset controller support

[Matthias Brugger]

On 14/07/2021 12:11, Enric Balletbo i Serra wrote:
> Among other features the mmsys driver should implement a reset
> controller to be able to reset different bits from their space.
> 
> Cc: Jitao Shi <jitao.shi@mediatek.com>
> Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

I'm happy to take this, as soon as we have the updated binding description.

Regards,
Matthias

> ---
> 
> (no changes since v1)
> 
>  drivers/soc/mediatek/mtk-mmsys.c | 69 ++++++++++++++++++++++++++++++++
>  drivers/soc/mediatek/mtk-mmsys.h |  2 +
>  2 files changed, 71 insertions(+)
> 
> diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
> index e681029fe804..6ac4deff0164 100644
> --- a/drivers/soc/mediatek/mtk-mmsys.c
> +++ b/drivers/soc/mediatek/mtk-mmsys.c
> @@ -4,10 +4,12 @@
>   * Author: James Liao <jamesjj.liao@mediatek.com>
>   */
>  
> +#include <linux/delay.h>
>  #include <linux/device.h>
>  #include <linux/io.h>
>  #include <linux/of_device.h>
>  #include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
>  #include <linux/soc/mediatek/mtk-mmsys.h>
>  
>  #include "mtk-mmsys.h"
> @@ -55,6 +57,8 @@ static const struct mtk_mmsys_driver_data mt8183_mmsys_driver_data = {
>  struct mtk_mmsys {
>  	void __iomem *regs;
>  	const struct mtk_mmsys_driver_data *data;
> +	spinlock_t lock; /* protects mmsys_sw_rst_b reg */
> +	struct reset_controller_dev rcdev;
>  };
>  
>  void mtk_mmsys_ddp_connect(struct device *dev,
> @@ -91,6 +95,59 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
>  }
>  EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_disconnect);
>  
> +static int mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned long id,
> +				  bool assert)
> +{
> +	struct mtk_mmsys *mmsys = container_of(rcdev, struct mtk_mmsys, rcdev);
> +	unsigned long flags;
> +	u32 reg;
> +	int i;
> +
> +	spin_lock_irqsave(&mmsys->lock, flags);
> +
> +	reg = readl_relaxed(mmsys->regs + MMSYS_SW0_RST_B);
> +
> +	if (assert)
> +		reg &= ~BIT(id);
> +	else
> +		reg |= BIT(id);
> +
> +	writel_relaxed(reg, mmsys->regs + MMSYS_SW0_RST_B);
> +
> +	spin_unlock_irqrestore(&mmsys->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int mtk_mmsys_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
> +{
> +	return mtk_mmsys_reset_update(rcdev, id, true);
> +}
> +
> +static int mtk_mmsys_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
> +{
> +	return mtk_mmsys_reset_update(rcdev, id, false);
> +}
> +
> +static int mtk_mmsys_reset(struct reset_controller_dev *rcdev, unsigned long id)
> +{
> +	int ret;
> +
> +	ret = mtk_mmsys_reset_assert(rcdev, id);
> +	if (ret)
> +		return ret;
> +
> +	usleep_range(1000, 1100);
> +
> +	return mtk_mmsys_reset_deassert(rcdev, id);
> +}
> +
> +static const struct reset_control_ops mtk_mmsys_reset_ops = {
> +	.assert = mtk_mmsys_reset_assert,
> +	.deassert = mtk_mmsys_reset_deassert,
> +	.reset = mtk_mmsys_reset,
> +};
> +
>  static int mtk_mmsys_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -111,6 +168,18 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>  
> +	spin_lock_init(&mmsys->lock);
> +
> +	mmsys->rcdev.owner = THIS_MODULE;
> +	mmsys->rcdev.nr_resets = 32;
> +	mmsys->rcdev.ops = &mtk_mmsys_reset_ops;
> +	mmsys->rcdev.of_node = pdev->dev.of_node;
> +	ret = devm_reset_controller_register(&pdev->dev, &mmsys->rcdev);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Couldn't register mmsys reset controller: %d\n", ret);
> +		return ret;
> +	}
> +
>  	mmsys->data = of_device_get_match_data(&pdev->dev);
>  	platform_set_drvdata(pdev, mmsys);
>  
> diff --git a/drivers/soc/mediatek/mtk-mmsys.h b/drivers/soc/mediatek/mtk-mmsys.h
> index 11388961dded..f9f9e12ceab8 100644
> --- a/drivers/soc/mediatek/mtk-mmsys.h
> +++ b/drivers/soc/mediatek/mtk-mmsys.h
> @@ -66,6 +66,8 @@
>  #define DPI_SEL_IN_BLS				0x0
>  #define DSI_SEL_IN_RDMA				0x1
>  
> +#define MMSYS_SW0_RST_B				0x140
> +
>  struct mtk_mmsys_routes {
>  	u32 from_comp;
>  	u32 to_comp;
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 6/7] soc: mediatek: mmsys: Add reset controller support

[kernel test robot]

Hi Enric,

I love your patch! Perhaps something to improve:

[auto build test WARNING on robh/for-next]
[also build test WARNING on pza/reset/next linux/master linus/master 
v5.14-rc1 next-20210714]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url: 
https://github.com/0day-ci/linux/commits/Enric-Balletbo-i-Serra/Add-support-to-the-mmsys-driver-to-be-a-reset-controller/20210714-181318
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git 
for-next
compiler: riscv64-linux-gcc (GCC) 9.3.0

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>


cppcheck possible warnings: (new ones prefixed by >>, may not real problems)

>> drivers/soc/mediatek/mtk-mmsys.c:104:6: warning: Unused variable: i [unusedVariable]
     int i;
         ^

vim +104 drivers/soc/mediatek/mtk-mmsys.c

2c758e301ed95a Enric Balletbo i Serra 2020-03-25   97  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14   98  static int 
mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned long id,
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14   99  				  bool assert)
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  100  {
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  101  	struct mtk_mmsys 
*mmsys = container_of(rcdev, struct mtk_mmsys, rcdev);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  102  	unsigned long flags;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  103  	u32 reg;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14 @104  	int i;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  105  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  106  	spin_lock_irqsave(&mmsys->lock, 
flags);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  107  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  108  	reg = readl_relaxed(mmsys->regs 
+ MMSYS_SW0_RST_B);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  109  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  110  	if (assert)
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  111  		reg &= ~BIT(id);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  112  	else
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  113  		reg |= BIT(id);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  114  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  115  	writel_relaxed(reg, mmsys->regs 
+ MMSYS_SW0_RST_B);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  116  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  117 
spin_unlock_irqrestore(&mmsys->lock, flags);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  118  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  119  	return 0;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  120  }
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  121
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

Re: [PATCH v2 6/7] soc: mediatek: mmsys: Add reset controller support

[kernel test robot]

Hi Enric,

I love your patch! Perhaps something to improve:

[auto build test WARNING on robh/for-next]
[also build test WARNING on pza/reset/next linux/master linus/master 
v5.14-rc1 next-20210714]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url: 
https://github.com/0day-ci/linux/commits/Enric-Balletbo-i-Serra/Add-support-to-the-mmsys-driver-to-be-a-reset-controller/20210714-181318
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git 
for-next
compiler: riscv64-linux-gcc (GCC) 9.3.0

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>


cppcheck possible warnings: (new ones prefixed by >>, may not real problems)

>> drivers/soc/mediatek/mtk-mmsys.c:104:6: warning: Unused variable: i [unusedVariable]
     int i;
         ^

vim +104 drivers/soc/mediatek/mtk-mmsys.c

2c758e301ed95a Enric Balletbo i Serra 2020-03-25   97  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14   98  static int 
mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned long id,
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14   99  				  bool assert)
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  100  {
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  101  	struct mtk_mmsys 
*mmsys = container_of(rcdev, struct mtk_mmsys, rcdev);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  102  	unsigned long flags;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  103  	u32 reg;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14 @104  	int i;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  105  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  106  	spin_lock_irqsave(&mmsys->lock, 
flags);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  107  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  108  	reg = readl_relaxed(mmsys->regs 
+ MMSYS_SW0_RST_B);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  109  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  110  	if (assert)
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  111  		reg &= ~BIT(id);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  112  	else
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  113  		reg |= BIT(id);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  114  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  115  	writel_relaxed(reg, mmsys->regs 
+ MMSYS_SW0_RST_B);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  116  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  117 
spin_unlock_irqrestore(&mmsys->lock, flags);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  118  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  119  	return 0;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  120  }
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  121
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 6/7] soc: mediatek: mmsys: Add reset controller support

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 3044 bytes --]


Hi Enric,

I love your patch! Perhaps something to improve:

[auto build test WARNING on robh/for-next]
[also build test WARNING on pza/reset/next linux/master linus/master 
v5.14-rc1 next-20210714]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url: 
https://github.com/0day-ci/linux/commits/Enric-Balletbo-i-Serra/Add-support-to-the-mmsys-driver-to-be-a-reset-controller/20210714-181318
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git 
for-next
compiler: riscv64-linux-gcc (GCC) 9.3.0

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>


cppcheck possible warnings: (new ones prefixed by >>, may not real problems)

>> drivers/soc/mediatek/mtk-mmsys.c:104:6: warning: Unused variable: i [unusedVariable]
     int i;
         ^

vim +104 drivers/soc/mediatek/mtk-mmsys.c

2c758e301ed95a Enric Balletbo i Serra 2020-03-25   97  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14   98  static int 
mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned long id,
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14   99  				  bool assert)
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  100  {
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  101  	struct mtk_mmsys 
*mmsys = container_of(rcdev, struct mtk_mmsys, rcdev);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  102  	unsigned long flags;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  103  	u32 reg;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14 @104  	int i;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  105  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  106  	spin_lock_irqsave(&mmsys->lock, 
flags);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  107  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  108  	reg = readl_relaxed(mmsys->regs 
+ MMSYS_SW0_RST_B);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  109  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  110  	if (assert)
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  111  		reg &= ~BIT(id);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  112  	else
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  113  		reg |= BIT(id);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  114  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  115  	writel_relaxed(reg, mmsys->regs 
+ MMSYS_SW0_RST_B);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  116  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  117 
spin_unlock_irqrestore(&mmsys->lock, flags);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  118  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  119  	return 0;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  120  }
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  121
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

Re: [PATCH v2 6/7] soc: mediatek: mmsys: Add reset controller support

[kernel test robot]

Hi Enric,

I love your patch! Perhaps something to improve:

[auto build test WARNING on robh/for-next]
[also build test WARNING on pza/reset/next linux/master linus/master 
v5.14-rc1 next-20210714]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url: 
https://github.com/0day-ci/linux/commits/Enric-Balletbo-i-Serra/Add-support-to-the-mmsys-driver-to-be-a-reset-controller/20210714-181318
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git 
for-next
:::::: branch date: 14 hours ago
:::::: commit date: 14 hours ago
compiler: riscv64-linux-gcc (GCC) 9.3.0

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>


cppcheck possible warnings: (new ones prefixed by >>, may not real problems)

>> drivers/soc/mediatek/mtk-mmsys.c:104:6: warning: Unused variable: i [unusedVariable]
     int i;
         ^

vim +104 drivers/soc/mediatek/mtk-mmsys.c

2c758e301ed95a Enric Balletbo i Serra 2020-03-25   97  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14   98  static int 
mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned long id,
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14   99  				  bool assert)
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  100  {
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  101  	struct mtk_mmsys 
*mmsys = container_of(rcdev, struct mtk_mmsys, rcdev);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  102  	unsigned long flags;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  103  	u32 reg;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14 @104  	int i;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  105  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  106  	spin_lock_irqsave(&mmsys->lock, 
flags);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  107  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  108  	reg = readl_relaxed(mmsys->regs 
+ MMSYS_SW0_RST_B);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  109  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  110  	if (assert)
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  111  		reg &= ~BIT(id);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  112  	else
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  113  		reg |= BIT(id);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  114  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  115  	writel_relaxed(reg, mmsys->regs 
+ MMSYS_SW0_RST_B);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  116  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  117 
spin_unlock_irqrestore(&mmsys->lock, flags);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  118  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  119  	return 0;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  120  }
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  121
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

Re: [PATCH v2 6/7] soc: mediatek: mmsys: Add reset controller support

[kernel test robot]

Hi Enric,

I love your patch! Perhaps something to improve:

[auto build test WARNING on robh/for-next]
[also build test WARNING on pza/reset/next linux/master linus/master 
v5.14-rc1 next-20210714]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url: 
https://github.com/0day-ci/linux/commits/Enric-Balletbo-i-Serra/Add-support-to-the-mmsys-driver-to-be-a-reset-controller/20210714-181318
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git 
for-next
:::::: branch date: 14 hours ago
:::::: commit date: 14 hours ago
compiler: riscv64-linux-gcc (GCC) 9.3.0

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>


cppcheck possible warnings: (new ones prefixed by >>, may not real problems)

>> drivers/soc/mediatek/mtk-mmsys.c:104:6: warning: Unused variable: i [unusedVariable]
     int i;
         ^

vim +104 drivers/soc/mediatek/mtk-mmsys.c

2c758e301ed95a Enric Balletbo i Serra 2020-03-25   97  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14   98  static int 
mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned long id,
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14   99  				  bool assert)
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  100  {
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  101  	struct mtk_mmsys 
*mmsys = container_of(rcdev, struct mtk_mmsys, rcdev);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  102  	unsigned long flags;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  103  	u32 reg;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14 @104  	int i;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  105  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  106  	spin_lock_irqsave(&mmsys->lock, 
flags);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  107  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  108  	reg = readl_relaxed(mmsys->regs 
+ MMSYS_SW0_RST_B);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  109  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  110  	if (assert)
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  111  		reg &= ~BIT(id);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  112  	else
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  113  		reg |= BIT(id);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  114  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  115  	writel_relaxed(reg, mmsys->regs 
+ MMSYS_SW0_RST_B);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  116  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  117 
spin_unlock_irqrestore(&mmsys->lock, flags);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  118  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  119  	return 0;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  120  }
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  121
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 6/7] soc: mediatek: mmsys: Add reset controller support

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 3112 bytes --]


Hi Enric,

I love your patch! Perhaps something to improve:

[auto build test WARNING on robh/for-next]
[also build test WARNING on pza/reset/next linux/master linus/master 
v5.14-rc1 next-20210714]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url: 
https://github.com/0day-ci/linux/commits/Enric-Balletbo-i-Serra/Add-support-to-the-mmsys-driver-to-be-a-reset-controller/20210714-181318
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git 
for-next
:::::: branch date: 14 hours ago
:::::: commit date: 14 hours ago
compiler: riscv64-linux-gcc (GCC) 9.3.0

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>


cppcheck possible warnings: (new ones prefixed by >>, may not real problems)

>> drivers/soc/mediatek/mtk-mmsys.c:104:6: warning: Unused variable: i [unusedVariable]
     int i;
         ^

vim +104 drivers/soc/mediatek/mtk-mmsys.c

2c758e301ed95a Enric Balletbo i Serra 2020-03-25   97  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14   98  static int 
mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned long id,
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14   99  				  bool assert)
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  100  {
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  101  	struct mtk_mmsys 
*mmsys = container_of(rcdev, struct mtk_mmsys, rcdev);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  102  	unsigned long flags;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  103  	u32 reg;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14 @104  	int i;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  105  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  106  	spin_lock_irqsave(&mmsys->lock, 
flags);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  107  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  108  	reg = readl_relaxed(mmsys->regs 
+ MMSYS_SW0_RST_B);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  109  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  110  	if (assert)
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  111  		reg &= ~BIT(id);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  112  	else
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  113  		reg |= BIT(id);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  114  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  115  	writel_relaxed(reg, mmsys->regs 
+ MMSYS_SW0_RST_B);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  116  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  117 
spin_unlock_irqrestore(&mmsys->lock, flags);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  118  08a3068f9490f0 
Enric Balletbo i Serra 2021-07-14  119  	return 0;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  120  }
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  121
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

Re: [PATCH v2 6/7] soc: mediatek: mmsys: Add reset controller support

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 3687 bytes --]

CC: kbuild-all(a)lists.01.org
In-Reply-To: <20210714121116.v2.6.I15e2419141a69b2e5c7e700c34d92a69df47e04d@changeid>
References: <20210714121116.v2.6.I15e2419141a69b2e5c7e700c34d92a69df47e04d(a)changeid>
TO: Enric Balletbo i Serra <enric.balletbo@collabora.com>
TO: linux-kernel(a)vger.kernel.org
CC: chunkuang.hu(a)kernel.org
CC: hsinyi(a)chromium.org
CC: kernel(a)collabora.com
CC: drinkcat(a)chromium.org
CC: eizan(a)chromium.org
CC: linux-mediatek(a)lists.infradead.org
CC: matthias.bgg(a)gmail.com
CC: jitao.shi(a)mediatek.com
CC: Philipp Zabel <p.zabel@pengutronix.de>

Hi Enric,

I love your patch! Perhaps something to improve:

[auto build test WARNING on robh/for-next]
[also build test WARNING on pza/reset/next linux/master linus/master v5.14-rc1 next-20210714]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Enric-Balletbo-i-Serra/Add-support-to-the-mmsys-driver-to-be-a-reset-controller/20210714-181318
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
:::::: branch date: 14 hours ago
:::::: commit date: 14 hours ago
compiler: riscv64-linux-gcc (GCC) 9.3.0

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>


cppcheck possible warnings: (new ones prefixed by >>, may not real problems)

>> drivers/soc/mediatek/mtk-mmsys.c:104:6: warning: Unused variable: i [unusedVariable]
    int i;
        ^

vim +104 drivers/soc/mediatek/mtk-mmsys.c

2c758e301ed95a Enric Balletbo i Serra 2020-03-25   97  
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14   98  static int mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned long id,
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14   99  				  bool assert)
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  100  {
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  101  	struct mtk_mmsys *mmsys = container_of(rcdev, struct mtk_mmsys, rcdev);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  102  	unsigned long flags;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  103  	u32 reg;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14 @104  	int i;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  105  
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  106  	spin_lock_irqsave(&mmsys->lock, flags);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  107  
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  108  	reg = readl_relaxed(mmsys->regs + MMSYS_SW0_RST_B);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  109  
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  110  	if (assert)
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  111  		reg &= ~BIT(id);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  112  	else
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  113  		reg |= BIT(id);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  114  
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  115  	writel_relaxed(reg, mmsys->regs + MMSYS_SW0_RST_B);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  116  
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  117  	spin_unlock_irqrestore(&mmsys->lock, flags);
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  118  
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  119  	return 0;
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  120  }
08a3068f9490f0 Enric Balletbo i Serra 2021-07-14  121  

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org