All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Zhang, Qi Z" <qi.z.zhang@intel.com>
To: "David Harton (dharton)" <dharton@cisco.com>
Cc: "Lu, Wenzhuo" <wenzhuo.lu@intel.com>,
	"Ananyev, Konstantin" <konstantin.ananyev@intel.com>,
	"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [PATCH v2] net/ixgbe: Restore vlan filter/extend for ixgbevf
Date: Thu, 14 Mar 2019 15:14:25 +0000	[thread overview]
Message-ID: <039ED4275CED7440929022BC67E706115334CA1F@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <CY4PR11MB1701B306BDF468F3AE81F026AA4B0@CY4PR11MB1701.namprd11.prod.outlook.com>



> -----Original Message-----
> From: David Harton (dharton) [mailto:dharton@cisco.com]
> Sent: Thursday, March 14, 2019 9:38 PM
> To: David Harton (dharton) <dharton@cisco.com>; Zhang, Qi Z
> <qi.z.zhang@intel.com>
> Cc: Lu, Wenzhuo <wenzhuo.lu@intel.com>; Ananyev, Konstantin
> <konstantin.ananyev@intel.com>; dev@dpdk.org
> Subject: RE: [PATCH v2] net/ixgbe: Restore vlan filter/extend for ixgbevf
> 
> Hi Qi,
> 
> This patch was rejected with no feedback.
> 
> Can you share why?

Because as Zhao Wei explained in v1 thread, in ixgbe_vlan_offload_config , ETH_VLAN_FILTER_MASK and DEV_RX_OFFLOAD_VLAN_EXTEND are ignored
This looks like VLAN_FILTER AND VLAN_EXTEND offload is not supported and I didn't see you reply for that, so I assume you agree with that. 


> 
> Without this patch users are not able to call the rte_eth_dev_vlan_filter() API for
> ixgbevf based ports because VLAN_FILTER cannot be enabled when calling
> rte_eth_dev_configure().

OK, seems vlan filter is able to be configured for ixgbevf, but I don't know how this will work because vlan filter table needs to be enabled first (ixgbe_vlan_hw_filter_enable)
So at least when it work with a DPDK PF, vlan filter will not work, maybe kernel PF driver will enable it by default? Could you share more insight? 
  
And same question to VLAN_EXTEND


> 
> Or, am I missing something?
> 
> Thanks,
> Dave
> 
> > -----Original Message-----
> > From: David Harton <dharton@cisco.com>
> > Sent: Friday, March 08, 2019 3:35 PM
> > To: dev@dpdk.org
> > Cc: wenzhuo.lu@intel.com; konstantin.ananyev@intel.com;
> > qi.z.zhang@intel.com; David Harton (dharton) <dharton@cisco.com>
> > Subject: [PATCH v2] net/ixgbe: Restore vlan filter/extend for ixgbevf
> >
> > ixgbevf vlan strip and extend capabilities were removed when migrating
> > to the bit flags implementation.
> >
> > Restoring the capbility to enable these offloads at configuration time.
> >
> > Fixes: ec3b1124d14d (\"net/ixgbe: convert to new Rx offloads API\")
> > Signed-off-by: David Harton <dharton@cisco.com>
> > ---
> >
> > v2: removed unused function ixgbe_is_vf()
> >
> >  drivers/net/ixgbe/ixgbe_rxtx.c | 23 ++---------------------
> >  1 file changed, 2 insertions(+), 21 deletions(-)
> >
> > diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c
> > b/drivers/net/ixgbe/ixgbe_rxtx.c index e92a70fb3..b1b83613e 100644
> > --- a/drivers/net/ixgbe/ixgbe_rxtx.c
> > +++ b/drivers/net/ixgbe/ixgbe_rxtx.c
> > @@ -2813,23 +2813,6 @@ ixgbe_reset_rx_queue(struct ixgbe_adapter
> > *adapter, struct ixgbe_rx_queue *rxq)  #endif  }
> >
> > -static int
> > -ixgbe_is_vf(struct rte_eth_dev *dev)
> > -{
> > -	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data-
> > >dev_private);
> > -
> > -	switch (hw->mac.type) {
> > -	case ixgbe_mac_82599_vf:
> > -	case ixgbe_mac_X540_vf:
> > -	case ixgbe_mac_X550_vf:
> > -	case ixgbe_mac_X550EM_x_vf:
> > -	case ixgbe_mac_X550EM_a_vf:
> > -		return 1;
> > -	default:
> > -		return 0;
> > -	}
> > -}
> > -
> >  uint64_t
> >  ixgbe_get_rx_queue_offloads(struct rte_eth_dev *dev)  { @@ -2853,15
> > +2836,13 @@ ixgbe_get_rx_port_offloads(struct rte_eth_dev *dev)
> >  		   DEV_RX_OFFLOAD_TCP_CKSUM   |
> >  		   DEV_RX_OFFLOAD_KEEP_CRC    |
> >  		   DEV_RX_OFFLOAD_JUMBO_FRAME |
> > +		   DEV_RX_OFFLOAD_VLAN_FILTER |
> > +		   DEV_RX_OFFLOAD_VLAN_EXTEND |
> >  		   DEV_RX_OFFLOAD_SCATTER;
> >	
> >  	if (hw->mac.type == ixgbe_mac_82598EB)
> >  		offloads |= DEV_RX_OFFLOAD_VLAN_STRIP;
> >
> > -	if (ixgbe_is_vf(dev) == 0)
> > -		offloads |= (DEV_RX_OFFLOAD_VLAN_FILTER |
> > -			     DEV_RX_OFFLOAD_VLAN_EXTEND);
> > -
> >  	/*
> >  	 * RSC is only supported by 82599 and x540 PF devices in a non-SR-
> > IOV
> >  	 * mode.
> > --
> > 2.19.1

  reply	other threads:[~2019-03-14 15:14 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-06 15:23 [PATCH] net/ixgbe: Restore vlan filter/extend for ixgbvef David Harton
2019-03-07 13:11 ` Zhang, Qi Z
2019-03-07 14:01   ` David Harton (dharton)
2019-03-08  6:35 ` Zhao1, Wei
2019-03-08 12:38   ` David Harton (dharton)
2019-03-11  2:02     ` Zhao1, Wei
2019-03-08 20:34 ` [PATCH v2] net/ixgbe: Restore vlan filter/extend for ixgbevf David Harton
2019-03-14 13:37   ` David Harton (dharton)
2019-03-14 15:14     ` Zhang, Qi Z [this message]
2019-03-14 15:51       ` David Harton (dharton)
2019-03-15  1:20         ` Zhang, Qi Z
2019-03-15  4:13           ` Zhao1, Wei
2019-03-15  5:28           ` Zhao1, Wei
2019-03-15  7:36             ` Zhang, Qi Z
2019-03-15  9:23             ` Ananyev, Konstantin
2019-03-15  9:35               ` Zhao1, Wei
2019-03-15 12:59                 ` Ananyev, Konstantin
2019-03-18  3:13                   ` Zhao1, Wei
2019-03-15 12:26   ` [PATCH v3] " David Harton
2019-03-15 16:08     ` [PATCH v4] net/ixgbe: Restore vlan filter " David Harton
2019-03-18  3:05       ` Zhao1, Wei
2019-03-18  4:59         ` Zhang, Qi Z

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=039ED4275CED7440929022BC67E706115334CA1F@SHSMSX103.ccr.corp.intel.com \
    --to=qi.z.zhang@intel.com \
    --cc=dev@dpdk.org \
    --cc=dharton@cisco.com \
    --cc=konstantin.ananyev@intel.com \
    --cc=wenzhuo.lu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.