All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Zhao1, Wei" <wei.zhao1@intel.com>
To: "David Harton (dharton)" <dharton@cisco.com>,
	"dev@dpdk.org" <dev@dpdk.org>,
	"Lu, Wenzhuo" <wenzhuo.lu@intel.com>,
	"Ananyev, Konstantin" <konstantin.ananyev@intel.com>
Subject: Re: [PATCH] net/ixgbe: Restore vlan filter/extend for ixgbvef
Date: Mon, 11 Mar 2019 02:02:01 +0000	[thread overview]
Message-ID: <A2573D2ACFCADC41BB3BE09C6DE313CA07EC47E5@PGSMSX103.gar.corp.intel.com> (raw)
In-Reply-To: <CY4PR11MB170194F503DC9B69BD273D0DAA4D0@CY4PR11MB1701.namprd11.prod.outlook.com>

Hi,



> -----Original Message-----

> From: David Harton (dharton) [mailto:dharton@cisco.com]

> Sent: Friday, March 8, 2019 8:39 PM

> To: Zhao1, Wei <wei.zhao1@intel.com>; dev@dpdk.org; Lu, Wenzhuo

> <wenzhuo.lu@intel.com>; Ananyev, Konstantin

> <konstantin.ananyev@intel.com>

> Subject: RE: [dpdk-dev] [PATCH] net/ixgbe: Restore vlan filter/extend for

> ixgbvef

>

> Hi

>

> > -----Original Message-----

> > From: Zhao1, Wei <wei.zhao1@intel.com<mailto:wei.zhao1@intel.com>>

> > Sent: Friday, March 08, 2019 1:35 AM

> > To: David Harton (dharton) <dharton@cisco.com<mailto:dharton@cisco.com>>; dev@dpdk.org<mailto:dev@dpdk.org>; Lu,

> > Wenzhuo <wenzhuo.lu@intel.com<mailto:wenzhuo.lu@intel.com>>; Ananyev, Konstantin

> > <konstantin.ananyev@intel.com<mailto:konstantin.ananyev@intel.com>>

> > Subject: RE: [dpdk-dev] [PATCH] net/ixgbe: Restore vlan filter/extend

> > for ixgbvef

> >

> > Hi,  David Harton

> >

> > > -----Original Message-----

> > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of David Harton

> > > Sent: Wednesday, March 6, 2019 11:24 PM

> > > To: dev@dpdk.org<mailto:dev@dpdk.org>; Lu, Wenzhuo <wenzhuo.lu@intel.com<mailto:wenzhuo.lu@intel.com>>; Ananyev,

> > > Konstantin <konstantin.ananyev@intel.com<mailto:konstantin.ananyev@intel.com>>

> > > Cc: David Harton <dharton@cisco.com<mailto:dharton@cisco.com>>

> > > Subject: [dpdk-dev] [PATCH] net/ixgbe: Restore vlan filter/extend

> > > for ixgbvef

> > >

> > > ixgevf vlan strip and extend capabilities were removed when

> > > migrating to the bit flags implementation.

> > >

> > > Restoring the capbility to enable these offloads at configuration time.

> > >

> > > Fixes: ec3b1124d14d (\"net/ixgbe: convert to new Rx offloads API\")

> > > Signed-off-by: David Harton <dharton@cisco.com<mailto:dharton@cisco.com>>

> > > ---

> > >  drivers/net/ixgbe/ixgbe_rxtx.c | 6 ++----

> > >  1 file changed, 2 insertions(+), 4 deletions(-)

> > >

> > > diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c

> > > b/drivers/net/ixgbe/ixgbe_rxtx.c index e92a70fb3..95c32257c 100644

> > > --- a/drivers/net/ixgbe/ixgbe_rxtx.c

> > > +++ b/drivers/net/ixgbe/ixgbe_rxtx.c

> > > @@ -2853,15 +2853,13 @@ ixgbe_get_rx_port_offloads(struct

> > > rte_eth_dev

> > > *dev)

> > >                         DEV_RX_OFFLOAD_TCP_CKSUM   |

> > >                         DEV_RX_OFFLOAD_KEEP_CRC    |

> > >                         DEV_RX_OFFLOAD_JUMBO_FRAME |

> > > +                     DEV_RX_OFFLOAD_VLAN_FILTER |

> > > +                     DEV_RX_OFFLOAD_VLAN_EXTEND |

> > >                         DEV_RX_OFFLOAD_SCATTER;

> > >

> >

> > Why do we  set   DEV_RX_OFFLOAD_VLAN_EXTEND for ixgbevf ?

> > It seems Ixgbevf do not support this configuration. Only pf does.

> > But this ixgbe_get_rx_port_offloads () is used by both vf and pf.

>

> I'm personally happy only to move FILTER but I noticed that EXTEND used to

> be 'supported' and I see references to it elsewhere in ixgbevf code:

>

> ixgbevf_dev_start()

>     /* Set HW strip */

>     mask = ETH_VLAN_STRIP_MASK | ETH_VLAN_FILTER_MASK |

>         ETH_VLAN_EXTEND_MASK;

>

> ixgbe_vlan_offload_config()

>     if (mask & ETH_VLAN_EXTEND_MASK) {

>         if (rxmode->offloads & DEV_RX_OFFLOAD_VLAN_EXTEND)

>             ixgbe_vlan_hw_extend_enable(dev);

>         else

>             ixgbe_vlan_hw_extend_disable(dev);

>     }

>

> These uses imply that EXTEND should be supported, correct?



No, not ixgbe_vlan_offload_config, but ixgbevf_vlan_offload_config,

ixgbevf_dev_start() is below:



                /* Set HW strip */

                mask = ETH_VLAN_STRIP_MASK | ETH_VLAN_FILTER_MASK |

                                ETH_VLAN_EXTEND_MASK;

                err = ixgbevf_vlan_offload_config(dev, mask);







static int

ixgbevf_vlan_offload_config(struct rte_eth_dev *dev, int mask)

{

                struct ixgbe_rx_queue *rxq;

                uint16_t i;

                int on = 0;



                /* VF function only support hw strip feature, others are not support */

                if (mask & ETH_VLAN_STRIP_MASK) {

                                for (i = 0; i < dev->data->nb_rx_queues; i++) {

                                                rxq = dev->data->rx_queues[i];

                                                on = !!(rxq->offloads & DEV_RX_OFFLOAD_VLAN_STRIP);

                                                ixgbevf_vlan_strip_queue_set(dev, i, on);

                                }

                }



                return 0;

}







>

> Thanks,

> Dave

>

> >

> >

> > >      if (hw->mac.type == ixgbe_mac_82598EB)

> > >                      offloads |= DEV_RX_OFFLOAD_VLAN_STRIP;

> > >

> > > -   if (ixgbe_is_vf(dev) == 0)

> > > -                   offloads |= (DEV_RX_OFFLOAD_VLAN_FILTER |

> > > -                                        DEV_RX_OFFLOAD_VLAN_EXTEND);

> > > -

> > >      /*

> > >       * RSC is only supported by 82599 and x540 PF devices in a non-SR-

> > > IOV

> > >       * mode.

> > > --

> > > 2.19.1

  reply	other threads:[~2019-03-11  2:02 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-06 15:23 [PATCH] net/ixgbe: Restore vlan filter/extend for ixgbvef David Harton
2019-03-07 13:11 ` Zhang, Qi Z
2019-03-07 14:01   ` David Harton (dharton)
2019-03-08  6:35 ` Zhao1, Wei
2019-03-08 12:38   ` David Harton (dharton)
2019-03-11  2:02     ` Zhao1, Wei [this message]
2019-03-08 20:34 ` [PATCH v2] net/ixgbe: Restore vlan filter/extend for ixgbevf David Harton
2019-03-14 13:37   ` David Harton (dharton)
2019-03-14 15:14     ` Zhang, Qi Z
2019-03-14 15:51       ` David Harton (dharton)
2019-03-15  1:20         ` Zhang, Qi Z
2019-03-15  4:13           ` Zhao1, Wei
2019-03-15  5:28           ` Zhao1, Wei
2019-03-15  7:36             ` Zhang, Qi Z
2019-03-15  9:23             ` Ananyev, Konstantin
2019-03-15  9:35               ` Zhao1, Wei
2019-03-15 12:59                 ` Ananyev, Konstantin
2019-03-18  3:13                   ` Zhao1, Wei
2019-03-15 12:26   ` [PATCH v3] " David Harton
2019-03-15 16:08     ` [PATCH v4] net/ixgbe: Restore vlan filter " David Harton
2019-03-18  3:05       ` Zhao1, Wei
2019-03-18  4:59         ` Zhang, Qi Z

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=A2573D2ACFCADC41BB3BE09C6DE313CA07EC47E5@PGSMSX103.gar.corp.intel.com \
    --to=wei.zhao1@intel.com \
    --cc=dev@dpdk.org \
    --cc=dharton@cisco.com \
    --cc=konstantin.ananyev@intel.com \
    --cc=wenzhuo.lu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.