* [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem)
@ 2018-11-02 0:12 Philippe Mathieu-Daudé
2018-11-02 0:12 ` [Qemu-devel] [PATCH for 3.1 v2 1/7] MAINTAINERS: Add an entry for the Raspberry Pi machines Philippe Mathieu-Daudé
` (10 more replies)
0 siblings, 11 replies; 26+ messages in thread
From: Philippe Mathieu-Daudé @ 2018-11-02 0:12 UTC (permalink / raw)
To: Peter Maydell, Guenter Roeck
Cc: Philippe Mathieu-Daudé, qemu-devel, qemu-arm
Hi,
This series is a mix of a previous work I had for the raspi, and a patch from
Guenter: https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg03153.html
The final patch keep Guenter ideas and comments, but is mostly a rewrite.
I dropped the A2W code from this work, it doesn't seems unuseful to me.
Guenter can you test this series?
I kept Guenter S-o-b and (C), is that OK? (Guenter?, Peter?)
- patches 1, 7: obvious updates in MAINTAINERS
- patches 3, 4: simple cleanups
- patches 2, 5: add UNIMP code
- patch 6: add the cprman (KISS init values from Guenter)
Peter: can you take patch #1 for 3.1?
Regards,
Phil.
Philippe Mathieu-Daudé (7):
MAINTAINERS: Add an entry for the Raspberry Pi machines
hw/misc/bcm2835_property: Handle the 'domain state' property
hw/arm/bcm2835: Use 0x prefix for hex numbers
hw/arm/bcm2835: Rename some definitions
hw/arm/bcm2835: Add various unimplemented peripherals
hw/arm/bcm2835: Add basic support for cprman (clock subsystem)
MAINTAINERS: Volunteer to review Raspi patches
MAINTAINERS | 7 +
hw/arm/bcm2835_peripherals.c | 42 +++-
hw/char/bcm2835_aux.c | 2 +-
hw/intc/bcm2836_control.c | 4 +-
hw/misc/Makefile.objs | 1 +
hw/misc/bcm2835_cprman.c | 277 +++++++++++++++++++++++++++
hw/misc/bcm2835_property.c | 8 +-
hw/misc/trace-events | 8 +
include/hw/arm/bcm2835_peripherals.h | 11 ++
include/hw/arm/raspi_platform.h | 6 +-
include/hw/misc/bcm2835_cprman.h | 28 +++
11 files changed, 387 insertions(+), 7 deletions(-)
create mode 100644 hw/misc/bcm2835_cprman.c
create mode 100644 include/hw/misc/bcm2835_cprman.h
--
2.17.2
^ permalink raw reply [flat|nested] 26+ messages in thread
* [Qemu-devel] [PATCH for 3.1 v2 1/7] MAINTAINERS: Add an entry for the Raspberry Pi machines
2018-11-02 0:12 [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem) Philippe Mathieu-Daudé
@ 2018-11-02 0:12 ` Philippe Mathieu-Daudé
2018-11-05 15:25 ` Peter Maydell
2018-11-02 0:12 ` [Qemu-devel] [PATCH for 3.2 v2 2/7] hw/misc/bcm2835_property: Handle the 'domain state' property Philippe Mathieu-Daudé
` (9 subsequent siblings)
10 siblings, 1 reply; 26+ messages in thread
From: Philippe Mathieu-Daudé @ 2018-11-02 0:12 UTC (permalink / raw)
To: Peter Maydell, Guenter Roeck
Cc: Philippe Mathieu-Daudé, qemu-devel, qemu-arm
So far the Raspi machines use the BCM2836 SoC which includes
a BCM2835 for the peripherals.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
MAINTAINERS | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index f2360efe3e..c41ea5ed3f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -683,6 +683,12 @@ F: hw/arm/nrf51_soc.c
F: hw/arm/microbit.c
F: include/hw/arm/nrf51_soc.h
+Raspberry Pi
+L: qemu-arm@nongnu.org
+S: Odd Fixes
+F: hw/*/bcm283*
+F: include/hw/*/bcm283*
+
CRIS Machines
-------------
Axis Dev88
--
2.17.2
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [Qemu-devel] [PATCH for 3.2 v2 2/7] hw/misc/bcm2835_property: Handle the 'domain state' property
2018-11-02 0:12 [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem) Philippe Mathieu-Daudé
2018-11-02 0:12 ` [Qemu-devel] [PATCH for 3.1 v2 1/7] MAINTAINERS: Add an entry for the Raspberry Pi machines Philippe Mathieu-Daudé
@ 2018-11-02 0:12 ` Philippe Mathieu-Daudé
2018-11-05 15:33 ` Peter Maydell
2018-11-02 0:12 ` [Qemu-devel] [PATCH for 3.2 v2 3/7] hw/arm/bcm2835: Use 0x prefix for hex numbers Philippe Mathieu-Daudé
` (8 subsequent siblings)
10 siblings, 1 reply; 26+ messages in thread
From: Philippe Mathieu-Daudé @ 2018-11-02 0:12 UTC (permalink / raw)
To: Peter Maydell, Guenter Roeck
Cc: Philippe Mathieu-Daudé, qemu-devel, qemu-arm
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
hw/misc/bcm2835_property.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c
index 145427ae0f..5d332324bd 100644
--- a/hw/misc/bcm2835_property.c
+++ b/hw/misc/bcm2835_property.c
@@ -121,6 +121,12 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
resplen = 8;
break;
+ case 0x00030030: /* domain state */
+ qemu_log_mask(LOG_UNIMP,
+ "bcm2835_property: %x get domain state NYI\n", tag);
+ resplen = 8;
+ break;
+
case 0x00038002: /* Set clock rate */
case 0x00038004: /* Set max clock rate */
case 0x00038007: /* Set min clock rate */
--
2.17.2
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [Qemu-devel] [PATCH for 3.2 v2 3/7] hw/arm/bcm2835: Use 0x prefix for hex numbers
2018-11-02 0:12 [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem) Philippe Mathieu-Daudé
2018-11-02 0:12 ` [Qemu-devel] [PATCH for 3.1 v2 1/7] MAINTAINERS: Add an entry for the Raspberry Pi machines Philippe Mathieu-Daudé
2018-11-02 0:12 ` [Qemu-devel] [PATCH for 3.2 v2 2/7] hw/misc/bcm2835_property: Handle the 'domain state' property Philippe Mathieu-Daudé
@ 2018-11-02 0:12 ` Philippe Mathieu-Daudé
2018-11-05 15:39 ` Peter Maydell
2018-11-02 0:13 ` [Qemu-devel] [PATCH for 3.2 v2 4/7] hw/arm/bcm2835: Rename some definitions Philippe Mathieu-Daudé
` (7 subsequent siblings)
10 siblings, 1 reply; 26+ messages in thread
From: Philippe Mathieu-Daudé @ 2018-11-02 0:12 UTC (permalink / raw)
To: Peter Maydell, Guenter Roeck
Cc: Philippe Mathieu-Daudé, qemu-devel, qemu-arm
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
hw/char/bcm2835_aux.c | 2 +-
hw/intc/bcm2836_control.c | 4 ++--
hw/misc/bcm2835_property.c | 2 +-
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/hw/char/bcm2835_aux.c b/hw/char/bcm2835_aux.c
index 0364596c55..9632e8972c 100644
--- a/hw/char/bcm2835_aux.c
+++ b/hw/char/bcm2835_aux.c
@@ -159,7 +159,7 @@ static void bcm2835_aux_write(void *opaque, hwaddr offset, uint64_t value,
case AUX_ENABLES:
if (value != 1) {
qemu_log_mask(LOG_UNIMP, "%s: unsupported attempt to enable SPI "
- "or disable UART\n", __func__);
+ "or disable UART: 0x%lx\n", __func__, value);
}
break;
diff --git a/hw/intc/bcm2836_control.c b/hw/intc/bcm2836_control.c
index cfa5bc7365..96cc53f8a7 100644
--- a/hw/intc/bcm2836_control.c
+++ b/hw/intc/bcm2836_control.c
@@ -204,8 +204,8 @@ static void bcm2836_control_write(void *opaque, hwaddr offset,
} else if (offset >= REG_MBOX0_RDCLR && offset < REG_LIMIT) {
s->mailboxes[(offset - REG_MBOX0_RDCLR) >> 2] &= ~val;
} else {
- qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
- __func__, offset);
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%"HWADDR_PRIx" 0x%lx\n",
+ __func__, offset, val);
return;
}
diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c
index 5d332324bd..c715cbaef6 100644
--- a/hw/misc/bcm2835_property.c
+++ b/hw/misc/bcm2835_property.c
@@ -277,7 +277,7 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
default:
qemu_log_mask(LOG_GUEST_ERROR,
- "bcm2835_property: unhandled tag %08x\n", tag);
+ "bcm2835_property: unhandled tag 0x%08x\n", tag);
break;
}
--
2.17.2
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [Qemu-devel] [PATCH for 3.2 v2 4/7] hw/arm/bcm2835: Rename some definitions
2018-11-02 0:12 [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem) Philippe Mathieu-Daudé
` (2 preceding siblings ...)
2018-11-02 0:12 ` [Qemu-devel] [PATCH for 3.2 v2 3/7] hw/arm/bcm2835: Use 0x prefix for hex numbers Philippe Mathieu-Daudé
@ 2018-11-02 0:13 ` Philippe Mathieu-Daudé
2018-11-05 15:39 ` Peter Maydell
2018-11-02 0:13 ` [Qemu-devel] [PATCH for 3.2 v2 5/7] hw/arm/bcm2835: Add various unimplemented peripherals Philippe Mathieu-Daudé
` (6 subsequent siblings)
10 siblings, 1 reply; 26+ messages in thread
From: Philippe Mathieu-Daudé @ 2018-11-02 0:13 UTC (permalink / raw)
To: Peter Maydell, Guenter Roeck
Cc: Philippe Mathieu-Daudé, qemu-devel, qemu-arm
The UART1 is part of the AUX peripheral,
the PCM_CLOCK (yet unimplemented) is part of the CPRMAN.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
hw/arm/bcm2835_peripherals.c | 2 +-
include/hw/arm/raspi_platform.h | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c
index 6be7660e8c..6d742ffe37 100644
--- a/hw/arm/bcm2835_peripherals.c
+++ b/hw/arm/bcm2835_peripherals.c
@@ -187,7 +187,7 @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
return;
}
- memory_region_add_subregion(&s->peri_mr, UART1_OFFSET,
+ memory_region_add_subregion(&s->peri_mr, AUX_OFFSET,
sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->aux), 0));
sysbus_connect_irq(SYS_BUS_DEVICE(&s->aux), 0,
qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ,
diff --git a/include/hw/arm/raspi_platform.h b/include/hw/arm/raspi_platform.h
index 6467e88ae6..105876dc0b 100644
--- a/include/hw/arm/raspi_platform.h
+++ b/include/hw/arm/raspi_platform.h
@@ -36,7 +36,7 @@
* Doorbells & Mailboxes */
#define PM_OFFSET 0x100000 /* Power Management, Reset controller
* and Watchdog registers */
-#define PCM_CLOCK_OFFSET 0x101098
+#define CPRMAN_OFFSET 0x101000
#define RNG_OFFSET 0x104000
#define GPIO_OFFSET 0x200000
#define UART0_OFFSET 0x201000
@@ -44,7 +44,7 @@
#define I2S_OFFSET 0x203000
#define SPI0_OFFSET 0x204000
#define BSC0_OFFSET 0x205000 /* BSC0 I2C/TWI */
-#define UART1_OFFSET 0x215000
+#define AUX_OFFSET 0x215000 /* AUX: UART1/SPI1/SPI2 */
#define EMMC_OFFSET 0x300000
#define SMI_OFFSET 0x600000
#define BSC1_OFFSET 0x804000 /* BSC1 I2C/TWI */
--
2.17.2
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [Qemu-devel] [PATCH for 3.2 v2 5/7] hw/arm/bcm2835: Add various unimplemented peripherals
2018-11-02 0:12 [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem) Philippe Mathieu-Daudé
` (3 preceding siblings ...)
2018-11-02 0:13 ` [Qemu-devel] [PATCH for 3.2 v2 4/7] hw/arm/bcm2835: Rename some definitions Philippe Mathieu-Daudé
@ 2018-11-02 0:13 ` Philippe Mathieu-Daudé
2018-11-05 15:51 ` Peter Maydell
2018-11-02 0:13 ` [Qemu-devel] [PATCH for 3.2 v2 6/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem) Philippe Mathieu-Daudé
` (5 subsequent siblings)
10 siblings, 1 reply; 26+ messages in thread
From: Philippe Mathieu-Daudé @ 2018-11-02 0:13 UTC (permalink / raw)
To: Peter Maydell, Guenter Roeck
Cc: Philippe Mathieu-Daudé, qemu-devel, qemu-arm
Base addresses and sizes taken from the "BCM2835 ARM Peripherals"
datasheet from February 06 2012:
https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
hw/arm/bcm2835_peripherals.c | 26 ++++++++++++++++++++++++++
include/hw/arm/bcm2835_peripherals.h | 10 ++++++++++
include/hw/arm/raspi_platform.h | 2 ++
3 files changed, 38 insertions(+)
diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c
index 6d742ffe37..108c058d17 100644
--- a/hw/arm/bcm2835_peripherals.c
+++ b/hw/arm/bcm2835_peripherals.c
@@ -21,6 +21,20 @@
/* Capabilities for SD controller: no DMA, high-speed, default clocks etc. */
#define BCM2835_SDHC_CAPAREG 0x52134b4
+static void create_unimp(BCM2835PeripheralState *ps,
+ UnimplementedDeviceState *uds,
+ const char *name, hwaddr ofs, hwaddr size)
+{
+ sysbus_init_child_obj(OBJECT(ps), name, uds,
+ sizeof(UnimplementedDeviceState),
+ TYPE_UNIMPLEMENTED_DEVICE);
+ qdev_prop_set_string(DEVICE(uds), "name", name);
+ qdev_prop_set_uint64(DEVICE(uds), "size", size);
+ object_property_set_bool(OBJECT(uds), true, "realized", &error_fatal);
+ memory_region_add_subregion(&ps->peri_mr, ofs,
+ sysbus_mmio_get_region(SYS_BUS_DEVICE(uds), 0));
+}
+
static void bcm2835_peripherals_init(Object *obj)
{
BCM2835PeripheralState *s = BCM2835_PERIPHERALS(obj);
@@ -334,6 +348,18 @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
error_propagate(errp, err);
return;
}
+
+ create_unimp(s, &s->pm, "bcm2835-pm", PM_OFFSET, 0x1000);
+ create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x1000);
+ create_unimp(s, &s->a2w, "bcm2835-a2w", 0x102000, 0x1000);
+ create_unimp(s, &s->i2s, "bcm2835-i2s", I2S_OFFSET, 0x100);
+ create_unimp(s, &s->smi, "bcm2835-smi", SMI_OFFSET, 0x100);
+ create_unimp(s, &s->spi0, "bcm2835-spi0", SPI0_OFFSET, 0x20);
+ create_unimp(s, &s->bscsl, "bcm2835-spis", BSC_SL_OFFSET, 0x100);
+ create_unimp(s, &s->i2c[0], "bcm2835-i2c0", BSC0_OFFSET, 0x20);
+ create_unimp(s, &s->i2c[1], "bcm2835-i2c1", BSC1_OFFSET, 0x20);
+ create_unimp(s, &s->i2c[2], "bcm2835-i2c2", BSC2_OFFSET, 0x20);
+ create_unimp(s, &s->dwc2, "dwc-usb2", USB_OFFSET, 0x100);
}
static void bcm2835_peripherals_class_init(ObjectClass *oc, void *data)
diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h
index f5b193f670..6fb52d20a8 100644
--- a/include/hw/arm/bcm2835_peripherals.h
+++ b/include/hw/arm/bcm2835_peripherals.h
@@ -23,6 +23,7 @@
#include "hw/sd/sdhci.h"
#include "hw/sd/bcm2835_sdhost.h"
#include "hw/gpio/bcm2835_gpio.h"
+#include "hw/misc/unimp.h"
#define TYPE_BCM2835_PERIPHERALS "bcm2835-peripherals"
#define BCM2835_PERIPHERALS(obj) \
@@ -37,6 +38,9 @@ typedef struct BCM2835PeripheralState {
MemoryRegion ram_alias[4];
qemu_irq irq, fiq;
+ UnimplementedDeviceState pm;
+ UnimplementedDeviceState cprman;
+ UnimplementedDeviceState a2w;
SysBusDevice *uart0;
BCM2835AuxState aux;
BCM2835FBState fb;
@@ -48,6 +52,12 @@ typedef struct BCM2835PeripheralState {
SDHCIState sdhci;
BCM2835SDHostState sdhost;
BCM2835GpioState gpio;
+ UnimplementedDeviceState i2s;
+ UnimplementedDeviceState spi0;
+ UnimplementedDeviceState i2c[3];
+ UnimplementedDeviceState bscsl;
+ UnimplementedDeviceState smi;
+ UnimplementedDeviceState dwc2;
} BCM2835PeripheralState;
#endif /* BCM2835_PERIPHERALS_H */
diff --git a/include/hw/arm/raspi_platform.h b/include/hw/arm/raspi_platform.h
index 105876dc0b..ec14db236b 100644
--- a/include/hw/arm/raspi_platform.h
+++ b/include/hw/arm/raspi_platform.h
@@ -44,10 +44,12 @@
#define I2S_OFFSET 0x203000
#define SPI0_OFFSET 0x204000
#define BSC0_OFFSET 0x205000 /* BSC0 I2C/TWI */
+#define BSC_SL_OFFSET 0x214000 /* SPI slave */
#define AUX_OFFSET 0x215000 /* AUX: UART1/SPI1/SPI2 */
#define EMMC_OFFSET 0x300000
#define SMI_OFFSET 0x600000
#define BSC1_OFFSET 0x804000 /* BSC1 I2C/TWI */
+#define BSC2_OFFSET 0x805000 /* BSC2 I2C/TWI */
#define USB_OFFSET 0x980000 /* DTC_OTG USB controller */
#define DMA15_OFFSET 0xE05000 /* DMA controller, channel 15 */
--
2.17.2
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [Qemu-devel] [PATCH for 3.2 v2 6/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem)
2018-11-02 0:12 [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem) Philippe Mathieu-Daudé
` (4 preceding siblings ...)
2018-11-02 0:13 ` [Qemu-devel] [PATCH for 3.2 v2 5/7] hw/arm/bcm2835: Add various unimplemented peripherals Philippe Mathieu-Daudé
@ 2018-11-02 0:13 ` Philippe Mathieu-Daudé
2018-11-05 16:02 ` Peter Maydell
2018-11-02 0:13 ` [Qemu-devel] [PATCH for 3.2 v2 7/7] MAINTAINERS: Volunteer to review Raspi patches Philippe Mathieu-Daudé
` (4 subsequent siblings)
10 siblings, 1 reply; 26+ messages in thread
From: Philippe Mathieu-Daudé @ 2018-11-02 0:13 UTC (permalink / raw)
To: Peter Maydell, Guenter Roeck
Cc: Philippe Mathieu-Daudé, qemu-devel, qemu-arm
Add basic support for BCM283x CPRMAN. Provide support for reading and
writing CPRMAN registers and initialize registers with sensible default
values. During runtime retain any written values.
Basic CPRMAN support is necessary and sufficient to boot Linux on raspi2
and raspi3 systems.
Without this change, recent Linux kernels fail to boot on raspi2 and
raspi3. raspi2 images experience with various divide by 0 errors and
hang. raspi3 images fail to initialize the console (ttyS1).
Register addresses and fields taken from the "BCM2835 ARM Peripherals"
datasheet from February 06 2012:
https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
hw/arm/bcm2835_peripherals.c | 16 +-
hw/misc/Makefile.objs | 1 +
hw/misc/bcm2835_cprman.c | 277 +++++++++++++++++++++++++++
hw/misc/trace-events | 8 +
include/hw/arm/bcm2835_peripherals.h | 3 +-
include/hw/misc/bcm2835_cprman.h | 28 +++
6 files changed, 331 insertions(+), 2 deletions(-)
create mode 100644 hw/misc/bcm2835_cprman.c
create mode 100644 include/hw/misc/bcm2835_cprman.h
diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c
index 108c058d17..11fb098063 100644
--- a/hw/arm/bcm2835_peripherals.c
+++ b/hw/arm/bcm2835_peripherals.c
@@ -99,6 +99,11 @@ static void bcm2835_peripherals_init(Object *obj)
object_property_add_const_link(OBJECT(&s->property), "dma-mr",
OBJECT(&s->gpu_bus_mr), &error_abort);
+ /* Clock subsystem */
+ object_initialize(&s->cprman, sizeof(s->cprman), TYPE_BCM2835_CPRMAN);
+ object_property_add_child(obj, "cprman", OBJECT(&s->cprman), NULL);
+ qdev_set_parent_bus(DEVICE(&s->cprman), sysbus_get_default());
+
/* Random Number Generator */
object_initialize(&s->rng, sizeof(s->rng), TYPE_BCM2835_RNG);
object_property_add_child(obj, "rng", OBJECT(&s->rng), NULL);
@@ -258,6 +263,13 @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
sysbus_connect_irq(SYS_BUS_DEVICE(&s->property), 0,
qdev_get_gpio_in(DEVICE(&s->mboxes), MBOX_CHAN_PROPERTY));
+ /* Clock subsystem */
+ object_property_set_bool(OBJECT(&s->cprman), true, "realized", &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+
/* Random Number Generator */
object_property_set_bool(OBJECT(&s->rng), true, "realized", &err);
if (err) {
@@ -265,6 +277,9 @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
return;
}
+ memory_region_add_subregion(&s->peri_mr, CPRMAN_OFFSET,
+ sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->cprman), 0));
+
memory_region_add_subregion(&s->peri_mr, RNG_OFFSET,
sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->rng), 0));
@@ -350,7 +365,6 @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
}
create_unimp(s, &s->pm, "bcm2835-pm", PM_OFFSET, 0x1000);
- create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x1000);
create_unimp(s, &s->a2w, "bcm2835-a2w", 0x102000, 0x1000);
create_unimp(s, &s->i2s, "bcm2835-i2s", I2S_OFFSET, 0x100);
create_unimp(s, &s->smi, "bcm2835-smi", SMI_OFFSET, 0x100);
diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
index 680350b3c3..93c11a2d4d 100644
--- a/hw/misc/Makefile.objs
+++ b/hw/misc/Makefile.objs
@@ -53,6 +53,7 @@ obj-$(CONFIG_OMAP) += omap_tap.o
obj-$(CONFIG_RASPI) += bcm2835_mbox.o
obj-$(CONFIG_RASPI) += bcm2835_property.o
obj-$(CONFIG_RASPI) += bcm2835_rng.o
+obj-$(CONFIG_RASPI) += bcm2835_cprman.o
obj-$(CONFIG_SLAVIO) += slavio_misc.o
obj-$(CONFIG_ZYNQ) += zynq_slcr.o
obj-$(CONFIG_ZYNQ) += zynq-xadc.o
diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c
new file mode 100644
index 0000000000..df7e92e77f
--- /dev/null
+++ b/hw/misc/bcm2835_cprman.c
@@ -0,0 +1,277 @@
+/*
+ * BCM2835 Clock subsystem (poor man's version)
+ * https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
+ *
+ * Copyright (C) 2018 Guenter Roeck <linux@roeck-us.net>
+ * Copyright (C) 2018 Philippe Mathieu-Daudé <f4bug@amsat.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/misc/bcm2835_cprman.h"
+#include "hw/register.h"
+#include "trace.h"
+
+FIELD(CM, PASSWD, 24, 8)
+
+FIELD(CM_CTL, SRC, 0, 4)
+FIELD(CM_CTL, ENABLE, 4, 1)
+FIELD(CM_CTL, KILL, 5, 1)
+FIELD(CM_CTL, GATE, 6, 1)
+FIELD(CM_CTL, BUSY, 7, 1)
+FIELD(CM_CTL, BUSYD, 8, 1)
+FIELD(CM_CTL, FRAC, 9, 1)
+
+FIELD(CM_DIV, FRAC, 0, 12)
+FIELD(CM_DIV, INTEGER, 12, 12)
+
+enum cprman_clock_source {
+ SRC_GND = 0,
+ SRC_OSC = 1,
+ SRC_TEST_DBG0 = 2,
+ SRC_TEST_DBG1 = 3,
+ SRC_PLLA_CORE = 4,
+ SRC_PLLC_CORE0 = 5,
+ SRC_PLLD_CORE = 6,
+ SRC_PLLH_AUX = 7,
+ SRC_PLLC_CORE1 = 8,
+ SRC_PLLC_CORE2 = 9
+};
+
+static const char *src_name(int src)
+{
+ static const char *src_names[16] = {
+ [SRC_GND] = "GND",
+ [SRC_OSC] = "OSC",
+ [SRC_TEST_DBG0] = "TEST_DBG0",
+ [SRC_TEST_DBG1] = "TEST_DBG1",
+ [SRC_PLLA_CORE] = "PLLA_CORE",
+ [SRC_PLLC_CORE0] = "PLLC_CORE0",
+ [SRC_PLLD_CORE] = "PLLD_CORE",
+ [SRC_PLLH_AUX] = "PLLH_AUX",
+ [SRC_PLLC_CORE1] = "PLLC_CORE1",
+ [SRC_PLLC_CORE2] = "PLLC_CORE2",
+ };
+ return src_names[src] ? src_names[src] : "UNKN";
+}
+
+static const char *ctldiv_names[CPRMAN_NUM_REGS] = {
+ [0] = "GNRIC",
+ [1] = "VPU",
+ [2] = "SYS",
+ [3] = "PERIA",
+ [4] = "PERII",
+ [5] = "H264",
+ [6] = "ISP",
+ [7] = "V3D",
+ [8] = "CAM0",
+ [9] = "CAM1",
+ [10] = "CCP2",
+ [11] = "DSI0E",
+ [12] = "DSI0P",
+ [13] = "DPI",
+ [14] = "GP0",
+ [15] = "GP1",
+ [16] = "GP2",
+ [17] = "HSM",
+ [18] = "OTP",
+ [19] = "PCM",
+ [20] = "PWM",
+ [21] = "SLIM",
+ [22] = "SMI",
+ [24] = "TCNT",
+ [25] = "TEC",
+ [26] = "TD0",
+ [27] = "TD1",
+ [28] = "TSENS",
+ [29] = "TIMER",
+ [30] = "UART",
+ [31] = "VEC",
+ [43] = "DSI1E",
+ [44] = "DSI1P",
+ [45] = "DFT",
+ [50] = "PULSE",
+ [53] = "SDC",
+ [54] = "ARM",
+ [55] = "AVEO",
+ [56] = "EMMC",
+};
+
+static bool is_ctldiv(hwaddr addr)
+{
+ return !!ctldiv_names[addr / 8];
+}
+
+static const char *rname(hwaddr addr)
+{
+ addr &= ~3;
+ switch (addr) {
+ case 0x100: return "OSCCOUNT";
+ case 0x104 ... 0x110:
+ case 0x170: return "PLLx";
+ case 0x114: return "LOCK";
+ case 0x118: return "EVENT";
+ default: {
+ int idx = addr / 8;
+ return ctldiv_names[idx] ? ctldiv_names[idx] : "UNKN";
+ }
+ }
+}
+
+static uint32_t scale(uint32_t value)
+{
+ return (1000ull * value) / 1024;
+}
+
+static uint64_t bcm2835_cprman_read(void *opaque, hwaddr addr, unsigned size)
+{
+ BCM2835CprmanState *s = (BCM2835CprmanState *)opaque;
+ bool is_div = addr % 8;
+ uint64_t value = s->regs[addr >> 2];
+
+ trace_bcm2835_cprman_rd(size << 3, addr, rname(addr), value);
+ if (is_ctldiv(addr)) {
+ if (is_div) {
+ trace_bcm2835_cprman_rd_div(rname(addr),
+ FIELD_EX32(value, CM_DIV, INTEGER),
+ scale(FIELD_EX32(value, CM_DIV, FRAC)));
+ } else {
+ trace_bcm2835_cprman_rd_ctl(rname(addr), src_name(value & 0xf),
+ FIELD_EX32(value, CM_CTL, ENABLE));
+ }
+ } else {
+ switch (addr & ~3) {
+ case 0x100 ... 0x118:
+ case 0x170:
+ qemu_log_mask(LOG_UNIMP, "[CM]: unimp r%02d PLL? 0x%04"
+ HWADDR_PRIx " = 0x%"PRIx64 "\n",
+ size << 3, addr, value);
+ value = -1; /* FIXME PLL lock? */
+ break;
+ default:
+ qemu_log_mask(LOG_UNIMP, "[CM]: unimp r%02d ??? 0x%04"
+ HWADDR_PRIx " = 0x%"PRIx64 "\n",
+ size << 3, addr, value);
+ }
+ }
+ return value;
+}
+
+#define CM_PASSWD 'Z'
+
+static void bcm2835_cprman_write(void *opaque, hwaddr addr,
+ uint64_t value, unsigned size)
+{
+ BCM2835CprmanState *s = (BCM2835CprmanState *)opaque;
+ bool is_div = addr % 8;
+ const char *name = rname(addr);
+
+ if (FIELD_EX32(value, CM, PASSWD) != CM_PASSWD) {
+ qemu_log_mask(LOG_GUEST_ERROR, "[CM]: password key error w%02d *0x%04"
+ HWADDR_PRIx " = 0x%" PRIx64 " (%s)\n",
+ size << 3, addr, value, name);
+ return;
+ }
+ value &= ~R_CM_PASSWD_MASK;
+ trace_bcm2835_cprman_wr(size << 3, addr, name, value);
+
+ s->regs[addr >> 2] = value;
+ if (is_ctldiv(addr)) {
+ if (is_div) {
+ trace_bcm2835_cprman_wr_div(name,
+ FIELD_EX32(value, CM_DIV, INTEGER),
+ scale(FIELD_EX32(value, CM_DIV, FRAC)));
+ } else {
+ trace_bcm2835_cprman_wr_ctl(name, src_name(value & 0xf),
+ FIELD_EX32(value, CM_CTL, ENABLE));
+ }
+ } else {
+ switch (addr & ~3) {
+ case 0x100 ... 0x118:
+ case 0x170:
+ qemu_log_mask(LOG_UNIMP, "[CM]: unimp w%02d PLL? *0x%04"
+ HWADDR_PRIx " = 0x%" PRIx64 "\n",
+ size << 3, addr, value);
+ break;
+ default:
+ qemu_log_mask(LOG_UNIMP, "[CM]: unimp w%02d ??? 0x%04"
+ HWADDR_PRIx " = 0x%"PRIx64 "\n",
+ size << 3, addr, value);
+ }
+ }
+}
+
+static const MemoryRegionOps bcm2835_cprman_ops = {
+ .read = bcm2835_cprman_read,
+ .write = bcm2835_cprman_write,
+ .impl.min_access_size = 4,
+ .valid.min_access_size = 4,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static const VMStateDescription vmstate_bcm2835_cprman = {
+ .name = TYPE_BCM2835_CPRMAN,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32_ARRAY(regs, BCM2835CprmanState, CPRMAN_NUM_REGS),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void bcm2835_cprman_reset(DeviceState *dev)
+{
+ BCM2835CprmanState *s = BCM2835_CPRMAN(dev);
+ int i;
+
+ /*
+ * Available information suggests that CPRMAN registers have default
+ * values which are not overwritten by ROMMON (u-boot). The hardware
+ * default values are unknown at this time.
+ * The default values selected here are necessary and sufficient
+ * to boot Linux directly (on raspi2 and raspi3). The selected
+ * values enable all clocks and set clock rates to match their
+ * parent rates.
+ */
+ for (i = 0; i < CPRMAN_NUM_REGS; i += 2) {
+ if (!is_ctldiv(i * 4)) {
+ continue;
+ }
+ s->regs[i] = R_CM_CTL_ENABLE_MASK | (SRC_OSC << R_CM_CTL_SRC_SHIFT);
+ s->regs[i + 1] = (1 << R_CM_DIV_FRAC_SHIFT);
+ }
+}
+
+static void bcm2835_cprman_init(Object *obj)
+{
+ BCM2835CprmanState *s = BCM2835_CPRMAN(obj);
+
+ memory_region_init_io(&s->iomem, obj, &bcm2835_cprman_ops, s,
+ TYPE_BCM2835_CPRMAN, 0x200);
+ sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
+}
+
+static void bcm2835_cprman_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->reset = bcm2835_cprman_reset;
+ dc->vmsd = &vmstate_bcm2835_cprman;
+}
+
+static TypeInfo bcm2835_cprman_info = {
+ .name = TYPE_BCM2835_CPRMAN,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(BCM2835CprmanState),
+ .class_init = bcm2835_cprman_class_init,
+ .instance_init = bcm2835_cprman_init,
+};
+
+static void bcm2835_cprman_register_types(void)
+{
+ type_register_static(&bcm2835_cprman_info);
+}
+
+type_init(bcm2835_cprman_register_types)
diff --git a/hw/misc/trace-events b/hw/misc/trace-events
index 52466c77c4..3dea1d10ff 100644
--- a/hw/misc/trace-events
+++ b/hw/misc/trace-events
@@ -132,3 +132,11 @@ iotkit_sysinfo_write(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysI
iotkit_sysctl_read(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysCtl read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
iotkit_sysctl_write(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysCtl write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
iotkit_sysctl_reset(void) "IoTKit SysCtl: reset"
+
+# hw/misc/bcm2835_cprman.c
+bcm2835_cprman_rd(unsigned size, uint64_t offset, const char *reg_name, uint32_t value) "cprman: rd%u @0x%03" PRIx64 " %s val:0x%x"
+bcm2835_cprman_rd_div(const char *reg_name, uint32_t v0, uint32_t v1) "cprman: rd %s.DIV float:%u.%u"
+bcm2835_cprman_rd_ctl(const char *reg_name, const char *src, uint32_t ena) "cprman: rd %s.CTL src:%s enabled:%u"
+bcm2835_cprman_wr(unsigned size, uint64_t offset, const char *reg_name, uint32_t value) "cprman: wr%u @0x%03" PRIx64 " %s val:0x%x"
+bcm2835_cprman_wr_div(const char *reg_name, uint32_t v0, uint32_t v1) "cprman: wr %s.DIV float:%u.%u"
+bcm2835_cprman_wr_ctl(const char *reg_name, const char *src, uint32_t ena) "cprman: wr %s.CTL src:%s enabled:%u"
diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h
index 6fb52d20a8..4e7e26eaed 100644
--- a/include/hw/arm/bcm2835_peripherals.h
+++ b/include/hw/arm/bcm2835_peripherals.h
@@ -18,6 +18,7 @@
#include "hw/dma/bcm2835_dma.h"
#include "hw/intc/bcm2835_ic.h"
#include "hw/misc/bcm2835_property.h"
+#include "hw/misc/bcm2835_cprman.h"
#include "hw/misc/bcm2835_rng.h"
#include "hw/misc/bcm2835_mbox.h"
#include "hw/sd/sdhci.h"
@@ -39,7 +40,7 @@ typedef struct BCM2835PeripheralState {
qemu_irq irq, fiq;
UnimplementedDeviceState pm;
- UnimplementedDeviceState cprman;
+ BCM2835CprmanState cprman;
UnimplementedDeviceState a2w;
SysBusDevice *uart0;
BCM2835AuxState aux;
diff --git a/include/hw/misc/bcm2835_cprman.h b/include/hw/misc/bcm2835_cprman.h
new file mode 100644
index 0000000000..376dd7c3a5
--- /dev/null
+++ b/include/hw/misc/bcm2835_cprman.h
@@ -0,0 +1,28 @@
+/*
+ * BCM2835 Poor-man's version of CPRMAN
+ *
+ * Copyright (C) 2018 Guenter Roeck <linux@roeck-us.net>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#ifndef BCM2835_CPRMAN_H
+#define BCM2835_CPRMAN_H
+
+#include "hw/sysbus.h"
+
+#define TYPE_BCM2835_CPRMAN "bcm2835-cprman"
+#define BCM2835_CPRMAN(obj) \
+ OBJECT_CHECK(BCM2835CprmanState, (obj), TYPE_BCM2835_CPRMAN)
+
+#define CPRMAN_NUM_REGS (0x200 / 4)
+
+typedef struct {
+ SysBusDevice busdev;
+ MemoryRegion iomem;
+
+ uint32_t regs[CPRMAN_NUM_REGS];
+} BCM2835CprmanState;
+
+#endif
--
2.17.2
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [Qemu-devel] [PATCH for 3.2 v2 7/7] MAINTAINERS: Volunteer to review Raspi patches
2018-11-02 0:12 [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem) Philippe Mathieu-Daudé
` (5 preceding siblings ...)
2018-11-02 0:13 ` [Qemu-devel] [PATCH for 3.2 v2 6/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem) Philippe Mathieu-Daudé
@ 2018-11-02 0:13 ` Philippe Mathieu-Daudé
2018-11-05 15:51 ` Peter Maydell
2018-11-02 2:52 ` [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem) Guenter Roeck
` (3 subsequent siblings)
10 siblings, 1 reply; 26+ messages in thread
From: Philippe Mathieu-Daudé @ 2018-11-02 0:13 UTC (permalink / raw)
To: Peter Maydell, Guenter Roeck
Cc: Philippe Mathieu-Daudé, qemu-devel, qemu-arm
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
MAINTAINERS | 1 +
1 file changed, 1 insertion(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index c41ea5ed3f..a76d047659 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -684,6 +684,7 @@ F: hw/arm/microbit.c
F: include/hw/arm/nrf51_soc.h
Raspberry Pi
+R: Philippe Mathieu-Daudé <f4bug@amsat.org>
L: qemu-arm@nongnu.org
S: Odd Fixes
F: hw/*/bcm283*
--
2.17.2
^ permalink raw reply related [flat|nested] 26+ messages in thread
* Re: [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem)
2018-11-02 0:12 [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem) Philippe Mathieu-Daudé
` (6 preceding siblings ...)
2018-11-02 0:13 ` [Qemu-devel] [PATCH for 3.2 v2 7/7] MAINTAINERS: Volunteer to review Raspi patches Philippe Mathieu-Daudé
@ 2018-11-02 2:52 ` Guenter Roeck
2018-11-02 7:32 ` Philippe Mathieu-Daudé
2018-11-03 15:33 ` no-reply
` (2 subsequent siblings)
10 siblings, 1 reply; 26+ messages in thread
From: Guenter Roeck @ 2018-11-02 2:52 UTC (permalink / raw)
To: Philippe Mathieu-Daudé, Peter Maydell; +Cc: qemu-devel, qemu-arm
On 11/1/18 5:12 PM, Philippe Mathieu-Daudé wrote:
> Hi,
>
> This series is a mix of a previous work I had for the raspi, and a patch from
> Guenter: https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg03153.html
>
> The final patch keep Guenter ideas and comments, but is mostly a rewrite.
> I dropped the A2W code from this work, it doesn't seems unuseful to me.
>
> Guenter can you test this series?
>
arm/raspi2 works, but aarch64/raspi3 stalls.
[ 45.683302] Run /sbin/init as init process
[ 50.745961] random: dd: uninitialized urandom read (512 bytes read)
[ 77.478266] Writes: Total: 2074828 Max/Min: 0/0 Fail: 0
... then nothing else until I abort the session.
This is with the series applied on top of master.
Guenter
> I kept Guenter S-o-b and (C), is that OK? (Guenter?, Peter?)
>
> - patches 1, 7: obvious updates in MAINTAINERS
> - patches 3, 4: simple cleanups
> - patches 2, 5: add UNIMP code
> - patch 6: add the cprman (KISS init values from Guenter)
>
> Peter: can you take patch #1 for 3.1?
>
> Regards,
>
> Phil.
>
> Philippe Mathieu-Daudé (7):
> MAINTAINERS: Add an entry for the Raspberry Pi machines
> hw/misc/bcm2835_property: Handle the 'domain state' property
> hw/arm/bcm2835: Use 0x prefix for hex numbers
> hw/arm/bcm2835: Rename some definitions
> hw/arm/bcm2835: Add various unimplemented peripherals
> hw/arm/bcm2835: Add basic support for cprman (clock subsystem)
> MAINTAINERS: Volunteer to review Raspi patches
>
> MAINTAINERS | 7 +
> hw/arm/bcm2835_peripherals.c | 42 +++-
> hw/char/bcm2835_aux.c | 2 +-
> hw/intc/bcm2836_control.c | 4 +-
> hw/misc/Makefile.objs | 1 +
> hw/misc/bcm2835_cprman.c | 277 +++++++++++++++++++++++++++
> hw/misc/bcm2835_property.c | 8 +-
> hw/misc/trace-events | 8 +
> include/hw/arm/bcm2835_peripherals.h | 11 ++
> include/hw/arm/raspi_platform.h | 6 +-
> include/hw/misc/bcm2835_cprman.h | 28 +++
> 11 files changed, 387 insertions(+), 7 deletions(-)
> create mode 100644 hw/misc/bcm2835_cprman.c
> create mode 100644 include/hw/misc/bcm2835_cprman.h
>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem)
2018-11-02 2:52 ` [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem) Guenter Roeck
@ 2018-11-02 7:32 ` Philippe Mathieu-Daudé
2018-11-02 7:48 ` Philippe Mathieu-Daudé
0 siblings, 1 reply; 26+ messages in thread
From: Philippe Mathieu-Daudé @ 2018-11-02 7:32 UTC (permalink / raw)
To: Guenter Roeck; +Cc: Peter Maydell, qemu-devel@nongnu.org Developers, qemu-arm
Hi Guenter,
On Fri, Nov 2, 2018 at 3:52 AM Guenter Roeck <linux@roeck-us.net> wrote:
>
> On 11/1/18 5:12 PM, Philippe Mathieu-Daudé wrote:
> > Hi,
> >
> > This series is a mix of a previous work I had for the raspi, and a patch from
> > Guenter: https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg03153.html
> >
> > The final patch keep Guenter ideas and comments, but is mostly a rewrite.
> > I dropped the A2W code from this work, it doesn't seems unuseful to me.
> >
> > Guenter can you test this series?
> >
>
> arm/raspi2 works, but aarch64/raspi3 stalls.
Thanks for testing it!
So I suppose the A2W is required. And I'm probably using a too old kernel,
I'm using the Buster preview following Peter's post [1]:
[ 0.000000] Linux version 4.14.0-3-arm64
(debian-kernel@lists.debian.org) (gcc version 7.2.0 (Debian 7.2.0-18))
#1 SMP Debian 4.14.12-2 (2018-01-06)
[ 0.000000] Machine model: Raspberry Pi 3 Model B
[...]
[ 8.044215] systemd[1]: Detected architecture arm64.
Welcome to Debian GNU/Linux buster/sid!
Debian GNU/Linux buster/sid rpi3 ttyAMA0
rpi3 login: root
Password:
Linux rpi3 4.14.0-3-arm64 #1 SMP Debian 4.14.12-2 (2018-01-06) aarch64
root@rpi3:~#
I'll look for a newer kernel.
BTW I use these QEMU command line options while testing:
qemu-system-aarch64 \
-d unimp,guest_errors \
-trace bcm2835_cprman_rd_\* -trace bcm2835_cprman_wr_\* \
...
And the cmdline suggested by Peter:
-append "rw earlycon=pl011,0x3f201000 console=ttyAMA0 loglevel=8
root=/dev/mmcblk0p2 fsck.repair=yes net.ifnames=0 rootwait memtest=1"
[1] https://translatedcode.wordpress.com/2018/04/25/debian-on-qemus-raspberry-pi-3-model/
>
> [ 45.683302] Run /sbin/init as init process
> [ 50.745961] random: dd: uninitialized urandom read (512 bytes read)
> [ 77.478266] Writes: Total: 2074828 Max/Min: 0/0 Fail: 0
>
> ... then nothing else until I abort the session.
>
> This is with the series applied on top of master.
>
> Guenter
>
> > I kept Guenter S-o-b and (C), is that OK? (Guenter?, Peter?)
> >
> > - patches 1, 7: obvious updates in MAINTAINERS
> > - patches 3, 4: simple cleanups
> > - patches 2, 5: add UNIMP code
> > - patch 6: add the cprman (KISS init values from Guenter)
> >
> > Peter: can you take patch #1 for 3.1?
> >
> > Regards,
> >
> > Phil.
> >
> > Philippe Mathieu-Daudé (7):
> > MAINTAINERS: Add an entry for the Raspberry Pi machines
> > hw/misc/bcm2835_property: Handle the 'domain state' property
> > hw/arm/bcm2835: Use 0x prefix for hex numbers
> > hw/arm/bcm2835: Rename some definitions
> > hw/arm/bcm2835: Add various unimplemented peripherals
> > hw/arm/bcm2835: Add basic support for cprman (clock subsystem)
> > MAINTAINERS: Volunteer to review Raspi patches
> >
> > MAINTAINERS | 7 +
> > hw/arm/bcm2835_peripherals.c | 42 +++-
> > hw/char/bcm2835_aux.c | 2 +-
> > hw/intc/bcm2836_control.c | 4 +-
> > hw/misc/Makefile.objs | 1 +
> > hw/misc/bcm2835_cprman.c | 277 +++++++++++++++++++++++++++
> > hw/misc/bcm2835_property.c | 8 +-
> > hw/misc/trace-events | 8 +
> > include/hw/arm/bcm2835_peripherals.h | 11 ++
> > include/hw/arm/raspi_platform.h | 6 +-
> > include/hw/misc/bcm2835_cprman.h | 28 +++
> > 11 files changed, 387 insertions(+), 7 deletions(-)
> > create mode 100644 hw/misc/bcm2835_cprman.c
> > create mode 100644 include/hw/misc/bcm2835_cprman.h
> >
>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem)
2018-11-02 7:32 ` Philippe Mathieu-Daudé
@ 2018-11-02 7:48 ` Philippe Mathieu-Daudé
2018-11-02 13:26 ` Guenter Roeck
0 siblings, 1 reply; 26+ messages in thread
From: Philippe Mathieu-Daudé @ 2018-11-02 7:48 UTC (permalink / raw)
To: Guenter Roeck; +Cc: Peter Maydell, qemu-devel@nongnu.org Developers, qemu-arm
On Fri, Nov 2, 2018 at 8:32 AM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>
> Hi Guenter,
>
> On Fri, Nov 2, 2018 at 3:52 AM Guenter Roeck <linux@roeck-us.net> wrote:
> >
> > On 11/1/18 5:12 PM, Philippe Mathieu-Daudé wrote:
> > > Hi,
> > >
> > > This series is a mix of a previous work I had for the raspi, and a patch from
> > > Guenter: https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg03153.html
> > >
> > > The final patch keep Guenter ideas and comments, but is mostly a rewrite.
> > > I dropped the A2W code from this work, it doesn't seems unuseful to me.
> > >
> > > Guenter can you test this series?
> > >
> >
> > arm/raspi2 works, but aarch64/raspi3 stalls.
>
> Thanks for testing it!
>
> So I suppose the A2W is required. And I'm probably using a too old kernel,
> I'm using the Buster preview following Peter's post [1]:
>
> [ 0.000000] Linux version 4.14.0-3-arm64
> (debian-kernel@lists.debian.org) (gcc version 7.2.0 (Debian 7.2.0-18))
> #1 SMP Debian 4.14.12-2 (2018-01-06)
> [ 0.000000] Machine model: Raspberry Pi 3 Model B
> [...]
> [ 8.044215] systemd[1]: Detected architecture arm64.
> Welcome to Debian GNU/Linux buster/sid!
>
> Debian GNU/Linux buster/sid rpi3 ttyAMA0
>
> rpi3 login: root
> Password:
> Linux rpi3 4.14.0-3-arm64 #1 SMP Debian 4.14.12-2 (2018-01-06) aarch64
> root@rpi3:~#
>
> I'll look for a newer kernel.
I'm a bit confuse since I can boot a 4.19 kernel:
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 4.19.0 (gokrazy@docker) (gcc version
6.3.0 20170516 (Debian 6.3.0-18)) #1 SMP PREEMPT Wed Mar 1 20:57:29
UTC 2017
[ 0.000000] Machine model: Raspberry Pi 3 Model B
[ 0.000000] earlycon: pl11 at MMIO 0x000000003f201000 (options '')
[ 0.000000] bootconsole [pl11] enabled
...
[ 2.722577] Freeing unused kernel memory: 5696K
[ 2.723256] Run /init as init process
Loading, please wait...
starting version 236
...
root@rpi3:~# uname -a
Linux rpi3 4.19.0 #1 SMP PREEMPT Wed Mar 1 20:57:29 UTC 2017 aarch64 GNU/Linux
>
> BTW I use these QEMU command line options while testing:
>
> qemu-system-aarch64 \
> -d unimp,guest_errors \
> -trace bcm2835_cprman_rd_\* -trace bcm2835_cprman_wr_\* \
> ...
>
> And the cmdline suggested by Peter:
>
> -append "rw earlycon=pl011,0x3f201000 console=ttyAMA0 loglevel=8
> root=/dev/mmcblk0p2 fsck.repair=yes net.ifnames=0 rootwait memtest=1"
>
> [1] https://translatedcode.wordpress.com/2018/04/25/debian-on-qemus-raspberry-pi-3-model/
>
> >
> > [ 45.683302] Run /sbin/init as init process
init is ran way after A2W register accesses, so I doubt they are the
problem here.
Can you provide me your testing setup?
Thanks,
Phil.
> > [ 50.745961] random: dd: uninitialized urandom read (512 bytes read)
> > [ 77.478266] Writes: Total: 2074828 Max/Min: 0/0 Fail: 0
> >
> > ... then nothing else until I abort the session.
> >
> > This is with the series applied on top of master.
> >
> > Guenter
> >
> > > I kept Guenter S-o-b and (C), is that OK? (Guenter?, Peter?)
> > >
> > > - patches 1, 7: obvious updates in MAINTAINERS
> > > - patches 3, 4: simple cleanups
> > > - patches 2, 5: add UNIMP code
> > > - patch 6: add the cprman (KISS init values from Guenter)
> > >
> > > Peter: can you take patch #1 for 3.1?
> > >
> > > Regards,
> > >
> > > Phil.
> > >
> > > Philippe Mathieu-Daudé (7):
> > > MAINTAINERS: Add an entry for the Raspberry Pi machines
> > > hw/misc/bcm2835_property: Handle the 'domain state' property
> > > hw/arm/bcm2835: Use 0x prefix for hex numbers
> > > hw/arm/bcm2835: Rename some definitions
> > > hw/arm/bcm2835: Add various unimplemented peripherals
> > > hw/arm/bcm2835: Add basic support for cprman (clock subsystem)
> > > MAINTAINERS: Volunteer to review Raspi patches
> > >
> > > MAINTAINERS | 7 +
> > > hw/arm/bcm2835_peripherals.c | 42 +++-
> > > hw/char/bcm2835_aux.c | 2 +-
> > > hw/intc/bcm2836_control.c | 4 +-
> > > hw/misc/Makefile.objs | 1 +
> > > hw/misc/bcm2835_cprman.c | 277 +++++++++++++++++++++++++++
> > > hw/misc/bcm2835_property.c | 8 +-
> > > hw/misc/trace-events | 8 +
> > > include/hw/arm/bcm2835_peripherals.h | 11 ++
> > > include/hw/arm/raspi_platform.h | 6 +-
> > > include/hw/misc/bcm2835_cprman.h | 28 +++
> > > 11 files changed, 387 insertions(+), 7 deletions(-)
> > > create mode 100644 hw/misc/bcm2835_cprman.c
> > > create mode 100644 include/hw/misc/bcm2835_cprman.h
> > >
> >
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem)
2018-11-02 7:48 ` Philippe Mathieu-Daudé
@ 2018-11-02 13:26 ` Guenter Roeck
0 siblings, 0 replies; 26+ messages in thread
From: Guenter Roeck @ 2018-11-02 13:26 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, qemu-devel@nongnu.org Developers, qemu-arm
On 11/2/18 12:48 AM, Philippe Mathieu-Daudé wrote:
> On Fri, Nov 2, 2018 at 8:32 AM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>>
>> Hi Guenter,
>>
>> On Fri, Nov 2, 2018 at 3:52 AM Guenter Roeck <linux@roeck-us.net> wrote:
>>>
>>> On 11/1/18 5:12 PM, Philippe Mathieu-Daudé wrote:
>>>> Hi,
>>>>
>>>> This series is a mix of a previous work I had for the raspi, and a patch from
>>>> Guenter: https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg03153.html
>>>>
>>>> The final patch keep Guenter ideas and comments, but is mostly a rewrite.
>>>> I dropped the A2W code from this work, it doesn't seems unuseful to me.
>>>>
>>>> Guenter can you test this series?
>>>>
>>>
>>> arm/raspi2 works, but aarch64/raspi3 stalls.
>>
>> Thanks for testing it!
>>
>> So I suppose the A2W is required. And I'm probably using a too old kernel,
>> I'm using the Buster preview following Peter's post [1]:
>>
>> [ 0.000000] Linux version 4.14.0-3-arm64
>> (debian-kernel@lists.debian.org) (gcc version 7.2.0 (Debian 7.2.0-18))
>> #1 SMP Debian 4.14.12-2 (2018-01-06)
>> [ 0.000000] Machine model: Raspberry Pi 3 Model B
>> [...]
>> [ 8.044215] systemd[1]: Detected architecture arm64.
>> Welcome to Debian GNU/Linux buster/sid!
>>
>> Debian GNU/Linux buster/sid rpi3 ttyAMA0
>>
>> rpi3 login: root
>> Password:
>> Linux rpi3 4.14.0-3-arm64 #1 SMP Debian 4.14.12-2 (2018-01-06) aarch64
>> root@rpi3:~#
>>
>> I'll look for a newer kernel.
>
> I'm a bit confuse since I can boot a 4.19 kernel:
>
> [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
> [ 0.000000] Linux version 4.19.0 (gokrazy@docker) (gcc version
> 6.3.0 20170516 (Debian 6.3.0-18)) #1 SMP PREEMPT Wed Mar 1 20:57:29
> UTC 2017
> [ 0.000000] Machine model: Raspberry Pi 3 Model B
> [ 0.000000] earlycon: pl11 at MMIO 0x000000003f201000 (options '')
> [ 0.000000] bootconsole [pl11] enabled
> ...
> [ 2.722577] Freeing unused kernel memory: 5696K
> [ 2.723256] Run /init as init process
> Loading, please wait...
> starting version 236
> ...
> root@rpi3:~# uname -a
> Linux rpi3 4.19.0 #1 SMP PREEMPT Wed Mar 1 20:57:29 UTC 2017 aarch64 GNU/Linux
>
>>
>> BTW I use these QEMU command line options while testing:
>>
>> qemu-system-aarch64 \
>> -d unimp,guest_errors \
>> -trace bcm2835_cprman_rd_\* -trace bcm2835_cprman_wr_\* \
>> ...
>>
>> And the cmdline suggested by Peter:
>>
>> -append "rw earlycon=pl011,0x3f201000 console=ttyAMA0 loglevel=8
>> root=/dev/mmcblk0p2 fsck.repair=yes net.ifnames=0 rootwait memtest=1"
>>
>> [1] https://translatedcode.wordpress.com/2018/04/25/debian-on-qemus-raspberry-pi-3-model/
>>
>>>
>>> [ 45.683302] Run /sbin/init as init process
>
> init is ran way after A2W register accesses, so I doubt they are the
> problem here.
>
> Can you provide me your testing setup?
>
-append 'earlycon=uart8250,mmio32,0x3f215040 rdinit=/sbin/init panic=-1 console=ttyS1,115200'
On raspi3, ttyAMA0 can not be used as console because it is connected to something else.
I can boot if I use ttyAMA0 as console. Comparing the log output with the output when
using my original patch, tt looks like ttyS1 doesn't come up.
Hope this helps,
Guenter
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem)
2018-11-02 0:12 [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem) Philippe Mathieu-Daudé
` (7 preceding siblings ...)
2018-11-02 2:52 ` [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem) Guenter Roeck
@ 2018-11-03 15:33 ` no-reply
2018-11-05 15:20 ` Peter Maydell
2018-11-06 3:28 ` no-reply
10 siblings, 0 replies; 26+ messages in thread
From: no-reply @ 2018-11-03 15:33 UTC (permalink / raw)
To: f4bug; +Cc: famz, peter.maydell, linux, qemu-arm, qemu-devel
Hi,
This series failed docker-mingw@fedora build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.
Type: series
Message-id: 20181102001303.32640-1-f4bug@amsat.org
Subject: [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem)
=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-mingw@fedora SHOW_ENV=1 J=8
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
Switched to a new branch 'test'
1997ee7b3b MAINTAINERS: Volunteer to review Raspi patches
5bd4f0ff52 hw/arm/bcm2835: Add basic support for cprman (clock subsystem)
5bb2c51372 hw/arm/bcm2835: Add various unimplemented peripherals
57d232cc31 hw/arm/bcm2835: Rename some definitions
242c2f27ba hw/arm/bcm2835: Use 0x prefix for hex numbers
2316d66248 hw/misc/bcm2835_property: Handle the 'domain state' property
0b73d8ca51 MAINTAINERS: Add an entry for the Raspberry Pi machines
=== OUTPUT BEGIN ===
BUILD fedora
make[1]: Entering directory '/var/tmp/patchew-tester-tmp-ujg3tlbv/src'
GEN /var/tmp/patchew-tester-tmp-ujg3tlbv/src/docker-src.2018-11-03-11.31.40.16898/qemu.tar
Cloning into '/var/tmp/patchew-tester-tmp-ujg3tlbv/src/docker-src.2018-11-03-11.31.40.16898/qemu.tar.vroot'...
done.
Checking out files: 9% (640/6448)
Checking out files: 10% (645/6448)
Checking out files: 11% (710/6448)
Checking out files: 12% (774/6448)
Checking out files: 13% (839/6448)
Checking out files: 14% (903/6448)
Checking out files: 14% (955/6448)
Checking out files: 15% (968/6448)
Checking out files: 16% (1032/6448)
Checking out files: 17% (1097/6448)
Checking out files: 18% (1161/6448)
Checking out files: 19% (1226/6448)
Checking out files: 19% (1278/6448)
Checking out files: 20% (1290/6448)
Checking out files: 21% (1355/6448)
Checking out files: 22% (1419/6448)
Checking out files: 23% (1484/6448)
Checking out files: 24% (1548/6448)
Checking out files: 25% (1612/6448)
Checking out files: 26% (1677/6448)
Checking out files: 27% (1741/6448)
Checking out files: 28% (1806/6448)
Checking out files: 29% (1870/6448)
Checking out files: 30% (1935/6448)
Checking out files: 31% (1999/6448)
Checking out files: 32% (2064/6448)
Checking out files: 33% (2128/6448)
Checking out files: 34% (2193/6448)
Checking out files: 35% (2257/6448)
Checking out files: 36% (2322/6448)
Checking out files: 37% (2386/6448)
Checking out files: 38% (2451/6448)
Checking out files: 39% (2515/6448)
Checking out files: 39% (2555/6448)
Checking out files: 40% (2580/6448)
Checking out files: 41% (2644/6448)
Checking out files: 42% (2709/6448)
Checking out files: 43% (2773/6448)
Checking out files: 44% (2838/6448)
Checking out files: 45% (2902/6448)
Checking out files: 46% (2967/6448)
Checking out files: 47% (3031/6448)
Checking out files: 48% (3096/6448)
Checking out files: 49% (3160/6448)
Checking out files: 50% (3224/6448)
Checking out files: 51% (3289/6448)
Checking out files: 52% (3353/6448)
Checking out files: 53% (3418/6448)
Checking out files: 54% (3482/6448)
Checking out files: 55% (3547/6448)
Checking out files: 56% (3611/6448)
Checking out files: 57% (3676/6448)
Checking out files: 58% (3740/6448)
Checking out files: 59% (3805/6448)
Checking out files: 60% (3869/6448)
Checking out files: 61% (3934/6448)
Checking out files: 62% (3998/6448)
Checking out files: 63% (4063/6448)
Checking out files: 64% (4127/6448)
Checking out files: 65% (4192/6448)
Checking out files: 66% (4256/6448)
Checking out files: 67% (4321/6448)
Checking out files: 68% (4385/6448)
Checking out files: 69% (4450/6448)
Checking out files: 70% (4514/6448)
Checking out files: 71% (4579/6448)
Checking out files: 72% (4643/6448)
Checking out files: 73% (4708/6448)
Checking out files: 74% (4772/6448)
Checking out files: 75% (4836/6448)
Checking out files: 76% (4901/6448)
Checking out files: 77% (4965/6448)
Checking out files: 78% (5030/6448)
Checking out files: 79% (5094/6448)
Checking out files: 80% (5159/6448)
Checking out files: 81% (5223/6448)
Checking out files: 82% (5288/6448)
Checking out files: 83% (5352/6448)
Checking out files: 84% (5417/6448)
Checking out files: 85% (5481/6448)
Checking out files: 86% (5546/6448)
Checking out files: 87% (5610/6448)
Checking out files: 88% (5675/6448)
Checking out files: 89% (5739/6448)
Checking out files: 90% (5804/6448)
Checking out files: 91% (5868/6448)
Checking out files: 92% (5933/6448)
Checking out files: 93% (5997/6448)
Checking out files: 94% (6062/6448)
Checking out files: 95% (6126/6448)
Checking out files: 96% (6191/6448)
Checking out files: 97% (6255/6448)
Checking out files: 98% (6320/6448)
Checking out files: 99% (6384/6448)
Checking out files: 100% (6448/6448)
Checking out files: 100% (6448/6448), done.
Your branch is up-to-date with 'origin/test'.
Submodule 'dtc' (git://git.qemu-project.org/dtc.git) registered for path 'dtc'
Cloning into '/var/tmp/patchew-tester-tmp-ujg3tlbv/src/docker-src.2018-11-03-11.31.40.16898/qemu.tar.vroot/dtc'...
Submodule path 'dtc': checked out '88f18909db731a627456f26d779445f84e449536'
Submodule 'ui/keycodemapdb' (git://git.qemu.org/keycodemapdb.git) registered for path 'ui/keycodemapdb'
Cloning into '/var/tmp/patchew-tester-tmp-ujg3tlbv/src/docker-src.2018-11-03-11.31.40.16898/qemu.tar.vroot/ui/keycodemapdb'...
Submodule path 'ui/keycodemapdb': checked out '6b3d716e2b6472eb7189d3220552280ef3d832ce'
COPY RUNNER
RUN test-mingw in qemu:fedora
Packages installed:
SDL2-devel-2.0.8-5.fc28.x86_64
bc-1.07.1-5.fc28.x86_64
bison-3.0.4-9.fc28.x86_64
bluez-libs-devel-5.50-1.fc28.x86_64
brlapi-devel-0.6.7-19.fc28.x86_64
bzip2-1.0.6-26.fc28.x86_64
bzip2-devel-1.0.6-26.fc28.x86_64
ccache-3.4.2-2.fc28.x86_64
clang-6.0.1-1.fc28.x86_64
device-mapper-multipath-devel-0.7.4-3.git07e7bd5.fc28.x86_64
findutils-4.6.0-19.fc28.x86_64
flex-2.6.1-7.fc28.x86_64
gcc-8.1.1-5.fc28.x86_64
gcc-c++-8.1.1-5.fc28.x86_64
gettext-0.19.8.1-14.fc28.x86_64
git-2.17.1-3.fc28.x86_64
glib2-devel-2.56.1-4.fc28.x86_64
glusterfs-api-devel-4.1.2-2.fc28.x86_64
gnutls-devel-3.6.3-3.fc28.x86_64
gtk3-devel-3.22.30-1.fc28.x86_64
hostname-3.20-3.fc28.x86_64
libaio-devel-0.3.110-11.fc28.x86_64
libasan-8.1.1-5.fc28.x86_64
libattr-devel-2.4.48-3.fc28.x86_64
libcap-devel-2.25-9.fc28.x86_64
libcap-ng-devel-0.7.9-4.fc28.x86_64
libcurl-devel-7.59.0-6.fc28.x86_64
libfdt-devel-1.4.6-5.fc28.x86_64
libpng-devel-1.6.34-6.fc28.x86_64
librbd-devel-12.2.7-1.fc28.x86_64
libssh2-devel-1.8.0-7.fc28.x86_64
libubsan-8.1.1-5.fc28.x86_64
libusbx-devel-1.0.22-1.fc28.x86_64
libxml2-devel-2.9.8-4.fc28.x86_64
llvm-6.0.1-6.fc28.x86_64
lzo-devel-2.08-12.fc28.x86_64
make-4.2.1-6.fc28.x86_64
mingw32-SDL2-2.0.5-3.fc27.noarch
mingw32-bzip2-1.0.6-9.fc27.noarch
mingw32-curl-7.57.0-1.fc28.noarch
mingw32-glib2-2.56.1-1.fc28.noarch
mingw32-gmp-6.1.2-2.fc27.noarch
mingw32-gnutls-3.6.2-1.fc28.noarch
mingw32-gtk3-3.22.30-1.fc28.noarch
mingw32-libjpeg-turbo-1.5.1-3.fc27.noarch
mingw32-libpng-1.6.29-2.fc27.noarch
mingw32-libssh2-1.8.0-3.fc27.noarch
mingw32-libtasn1-4.13-1.fc28.noarch
mingw32-nettle-3.4-1.fc28.noarch
mingw32-pixman-0.34.0-3.fc27.noarch
mingw32-pkg-config-0.28-9.fc27.x86_64
mingw64-SDL2-2.0.5-3.fc27.noarch
mingw64-bzip2-1.0.6-9.fc27.noarch
mingw64-curl-7.57.0-1.fc28.noarch
mingw64-glib2-2.56.1-1.fc28.noarch
mingw64-gmp-6.1.2-2.fc27.noarch
mingw64-gnutls-3.6.2-1.fc28.noarch
mingw64-gtk3-3.22.30-1.fc28.noarch
mingw64-libjpeg-turbo-1.5.1-3.fc27.noarch
mingw64-libpng-1.6.29-2.fc27.noarch
mingw64-libssh2-1.8.0-3.fc27.noarch
mingw64-libtasn1-4.13-1.fc28.noarch
mingw64-nettle-3.4-1.fc28.noarch
mingw64-pixman-0.34.0-3.fc27.noarch
mingw64-pkg-config-0.28-9.fc27.x86_64
ncurses-devel-6.1-5.20180224.fc28.x86_64
nettle-devel-3.4-2.fc28.x86_64
nss-devel-3.38.0-1.0.fc28.x86_64
numactl-devel-2.0.11-8.fc28.x86_64
package PyYAML is not installed
package libjpeg-devel is not installed
perl-5.26.2-413.fc28.x86_64
pixman-devel-0.34.0-8.fc28.x86_64
python3-3.6.5-1.fc28.x86_64
snappy-devel-1.1.7-5.fc28.x86_64
sparse-0.5.2-1.fc28.x86_64
spice-server-devel-0.14.0-4.fc28.x86_64
systemtap-sdt-devel-3.3-1.fc28.x86_64
tar-1.30-3.fc28.x86_64
usbredir-devel-0.8.0-1.fc28.x86_64
virglrenderer-devel-0.6.0-4.20170210git76b3da97b.fc28.x86_64
vte3-devel-0.36.5-6.fc28.x86_64
which-2.21-8.fc28.x86_64
xen-devel-4.10.1-5.fc28.x86_64
zlib-devel-1.2.11-8.fc28.x86_64
Environment variables:
TARGET_LIST=
PACKAGES=bc bison bluez-libs-devel brlapi-devel bzip2 bzip2-devel ccache clang device-mapper-multipath-devel findutils flex gcc gcc-c++ gettext git glib2-devel glusterfs-api-devel gnutls-devel gtk3-devel hostname libaio-devel libasan libattr-devel libcap-devel libcap-ng-devel libcurl-devel libfdt-devel libjpeg-devel libpng-devel librbd-devel libssh2-devel libubsan libusbx-devel libxml2-devel llvm lzo-devel make mingw32-bzip2 mingw32-curl mingw32-glib2 mingw32-gmp mingw32-gnutls mingw32-gtk3 mingw32-libjpeg-turbo mingw32-libpng mingw32-libssh2 mingw32-libtasn1 mingw32-nettle mingw32-pixman mingw32-pkg-config mingw32-SDL2 mingw64-bzip2 mingw64-curl mingw64-glib2 mingw64-gmp mingw64-gnutls mingw64-gtk3 mingw64-libjpeg-turbo mingw64-libpng mingw64-libssh2 mingw64-libtasn1 mingw64-nettle mingw64-pixman mingw64-pkg-config mingw64-SDL2 ncurses-devel nettle-devel nss-devel numactl-devel perl pixman-devel python3 PyYAML SDL2-devel snappy-devel sparse spice-server-devel systemtap-sdt-devel tar usbredir-devel virglrenderer-devel vte3-devel which xen-devel zlib-devel
J=8
V=
HOSTNAME=5a7d62dc939b
DEBUG=
SHOW_ENV=1
PWD=/
HOME=/home/patchew
CCACHE_DIR=/var/tmp/ccache
DISTTAG=f28container
QEMU_CONFIGURE_OPTS=--python=/usr/bin/python3
FGC=f28
TEST_DIR=/tmp/qemu-test
SHLVL=1
FEATURES=mingw clang pyyaml asan dtc
PATH=/usr/lib/ccache:/usr/lib64/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
MAKEFLAGS= -j8
EXTRA_CONFIGURE_OPTS=
_=/usr/bin/env
Configure options:
--enable-werror --target-list=x86_64-softmmu,aarch64-softmmu --prefix=/tmp/qemu-test/install --python=/usr/bin/python3 --cross-prefix=x86_64-w64-mingw32- --enable-trace-backends=simple --enable-gnutls --enable-nettle --enable-curl --enable-vnc --enable-bzip2 --enable-guest-agent --with-sdlabi=2.0
Install prefix /tmp/qemu-test/install
BIOS directory /tmp/qemu-test/install
firmware path /tmp/qemu-test/install/share/qemu-firmware
binary directory /tmp/qemu-test/install
library directory /tmp/qemu-test/install/lib
module directory /tmp/qemu-test/install/lib
libexec directory /tmp/qemu-test/install/libexec
include directory /tmp/qemu-test/install/include
config directory /tmp/qemu-test/install
local state directory queried at runtime
Windows SDK no
Source path /tmp/qemu-test/src
GIT binary git
GIT submodules
C compiler x86_64-w64-mingw32-gcc
Host C compiler cc
C++ compiler x86_64-w64-mingw32-g++
Objective-C compiler clang
ARFLAGS rv
CFLAGS -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -g
QEMU_CFLAGS -I/usr/x86_64-w64-mingw32/sys-root/mingw/include/pixman-1 -I$(SRC_PATH)/dtc/libfdt -Werror -DHAS_LIBSSH2_SFTP_FSYNC -I/usr/x86_64-w64-mingw32/sys-root/mingw/include -mms-bitfields -I/usr/x86_64-w64-mingw32/sys-root/mingw/include/glib-2.0 -I/usr/x86_64-w64-mingw32/sys-root/mingw/lib/glib-2.0/include -I/usr/x86_64-w64-mingw32/sys-root/mingw/include -m64 -mcx16 -mthreads -D__USE_MINGW_ANSI_STDIO=1 -DWIN32_LEAN_AND_MEAN -DWINVER=0x501 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -Wexpansion-to-defined -Wendif-labels -Wno-shift-negative-value -Wno-missing-include-dirs -Wempty-body -Wnested-externs -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wold-style-declaration -Wold-style-definition -Wtype-limits -fstack-protector-strong -I/usr/x86_64-w64-mingw32/sys-root/mingw/include -I/usr/x86_64-w64-mingw32/sys-root/mingw/include/p11-kit-1 -I/usr/x86_64-w64-mingw32/sys-root/mingw/include -I/usr/x86_64-w64-mingw32/sys-root/mingw/include/libpng16
LDFLAGS -Wl,--nxcompat -Wl,--no-seh -Wl,--dynamicbase -Wl,--warn-common -m64 -g
QEMU_LDFLAGS -L$(BUILD_DIR)/dtc/libfdt
make make
install install
python /usr/bin/python3 -B
smbd /usr/sbin/smbd
module support no
host CPU x86_64
host big endian no
target list x86_64-softmmu aarch64-softmmu
gprof enabled no
sparse enabled no
strip binaries yes
profiler no
static build no
SDL support yes (2.0.5)
GTK support yes (3.22.30)
GTK GL support no
VTE support no
TLS priority NORMAL
GNUTLS support yes
libgcrypt no
nettle yes (3.4)
libtasn1 yes
curses support no
virgl support no
curl support yes
mingw32 support yes
Audio drivers dsound
Block whitelist (rw)
Block whitelist (ro)
VirtFS support no
Multipath support no
VNC support yes
VNC SASL support no
VNC JPEG support yes
VNC PNG support yes
xen support no
brlapi support no
bluez support no
Documentation no
PIE no
vde support no
netmap support no
Linux AIO support no
ATTR/XATTR support no
Install blobs yes
KVM support no
HAX support yes
HVF support no
WHPX support no
TCG support yes
TCG debug enabled no
TCG interpreter no
malloc trim support no
RDMA support no
PVRDMA support no
fdt support git
membarrier no
preadv support no
fdatasync no
madvise no
posix_madvise no
posix_memalign no
libcap-ng support no
vhost-net support no
vhost-crypto support no
vhost-scsi support no
vhost-vsock support no
vhost-user support no
Trace backends simple
Trace output file trace-<pid>
spice support no
rbd support no
xfsctl support no
smartcard support no
libusb no
usb net redir no
OpenGL support no
OpenGL dmabufs no
libiscsi support no
libnfs support no
build guest agent yes
QGA VSS support no
QGA w32 disk info yes
QGA MSI support no
seccomp support no
coroutine backend win32
coroutine pool yes
debug stack usage no
mutex debugging no
crypto afalg no
GlusterFS support no
gcov gcov
gcov enabled no
TPM support yes
libssh2 support yes
TPM passthrough no
TPM emulator no
QOM debugging yes
Live block migration yes
lzo support no
snappy support no
bzip2 support yes
NUMA host support no
libxml2 no
tcmalloc support no
jemalloc support no
avx2 optimization yes
replication support yes
VxHS block device no
capstone no
docker no
libpmem support no
libudev no
NOTE: cross-compilers enabled: 'x86_64-w64-mingw32-gcc'
GEN x86_64-softmmu/config-devices.mak.tmp
GEN aarch64-softmmu/config-devices.mak.tmp
GEN config-host.h
GEN qemu-options.def
GEN qapi-gen
GEN trace/generated-tcg-tracers.h
GEN trace/generated-helpers-wrappers.h
GEN trace/generated-helpers.h
GEN trace/generated-helpers.c
GEN aarch64-softmmu/config-devices.mak
GEN module_block.h
GEN ui/input-keymap-linux-to-qcode.c
GEN ui/input-keymap-atset1-to-qcode.c
GEN x86_64-softmmu/config-devices.mak
GEN ui/input-keymap-qcode-to-atset1.c
GEN ui/input-keymap-qcode-to-atset2.c
GEN ui/input-keymap-qcode-to-atset3.c
GEN ui/input-keymap-qcode-to-linux.c
GEN ui/input-keymap-qcode-to-qnum.c
GEN ui/input-keymap-qcode-to-sun.c
GEN ui/input-keymap-qnum-to-qcode.c
GEN ui/input-keymap-usb-to-qcode.c
GEN ui/input-keymap-win32-to-qcode.c
GEN ui/input-keymap-x11-to-qcode.c
GEN ui/input-keymap-xorgevdev-to-qcode.c
GEN ui/input-keymap-xorgkbd-to-qcode.c
GEN ui/input-keymap-xorgxquartz-to-qcode.c
GEN ui/input-keymap-xorgxwin-to-qcode.c
GEN ui/input-keymap-osx-to-qcode.c
GEN tests/test-qapi-gen
GEN trace-root.h
GEN accel/kvm/trace.h
GEN accel/tcg/trace.h
GEN audio/trace.h
GEN block/trace.h
GEN chardev/trace.h
GEN crypto/trace.h
GEN hw/9pfs/trace.h
GEN hw/acpi/trace.h
GEN hw/alpha/trace.h
GEN hw/arm/trace.h
GEN hw/audio/trace.h
GEN hw/block/trace.h
GEN hw/block/dataplane/trace.h
GEN hw/char/trace.h
GEN hw/display/trace.h
GEN hw/dma/trace.h
GEN hw/hppa/trace.h
GEN hw/i2c/trace.h
GEN hw/i386/trace.h
GEN hw/i386/xen/trace.h
GEN hw/ide/trace.h
GEN hw/input/trace.h
GEN hw/intc/trace.h
GEN hw/isa/trace.h
GEN hw/mem/trace.h
GEN hw/misc/trace.h
GEN hw/misc/macio/trace.h
GEN hw/net/trace.h
GEN hw/nvram/trace.h
GEN hw/pci/trace.h
GEN hw/pci-host/trace.h
GEN hw/ppc/trace.h
GEN hw/rdma/trace.h
GEN hw/rdma/vmw/trace.h
GEN hw/s390x/trace.h
GEN hw/scsi/trace.h
GEN hw/sd/trace.h
GEN hw/sparc/trace.h
GEN hw/sparc64/trace.h
GEN hw/timer/trace.h
GEN hw/tpm/trace.h
GEN hw/usb/trace.h
GEN hw/vfio/trace.h
GEN hw/virtio/trace.h
GEN hw/watchdog/trace.h
GEN hw/xen/trace.h
GEN io/trace.h
GEN linux-user/trace.h
GEN migration/trace.h
GEN nbd/trace.h
GEN net/trace.h
GEN qapi/trace.h
GEN qom/trace.h
GEN scsi/trace.h
GEN target/arm/trace.h
GEN target/i386/trace.h
GEN target/mips/trace.h
GEN target/ppc/trace.h
GEN target/s390x/trace.h
GEN target/sparc/trace.h
GEN ui/trace.h
GEN util/trace.h
GEN trace-root.c
GEN accel/kvm/trace.c
GEN accel/tcg/trace.c
GEN audio/trace.c
GEN block/trace.c
GEN chardev/trace.c
GEN crypto/trace.c
GEN hw/9pfs/trace.c
GEN hw/acpi/trace.c
GEN hw/alpha/trace.c
GEN hw/arm/trace.c
GEN hw/audio/trace.c
GEN hw/block/trace.c
GEN hw/block/dataplane/trace.c
GEN hw/char/trace.c
GEN hw/display/trace.c
GEN hw/dma/trace.c
GEN hw/hppa/trace.c
GEN hw/i2c/trace.c
GEN hw/i386/trace.c
GEN hw/i386/xen/trace.c
GEN hw/ide/trace.c
GEN hw/input/trace.c
GEN hw/intc/trace.c
GEN hw/isa/trace.c
GEN hw/mem/trace.c
GEN hw/misc/trace.c
GEN hw/misc/macio/trace.c
GEN hw/net/trace.c
GEN hw/nvram/trace.c
GEN hw/pci/trace.c
GEN hw/pci-host/trace.c
GEN hw/ppc/trace.c
GEN hw/rdma/trace.c
GEN hw/rdma/vmw/trace.c
GEN hw/s390x/trace.c
GEN hw/scsi/trace.c
GEN hw/sd/trace.c
GEN hw/sparc/trace.c
GEN hw/sparc64/trace.c
GEN hw/timer/trace.c
GEN hw/tpm/trace.c
GEN hw/usb/trace.c
GEN hw/vfio/trace.c
GEN hw/virtio/trace.c
GEN hw/watchdog/trace.c
GEN hw/xen/trace.c
GEN io/trace.c
GEN linux-user/trace.c
GEN migration/trace.c
GEN nbd/trace.c
GEN net/trace.c
GEN qapi/trace.c
GEN qom/trace.c
GEN scsi/trace.c
GEN target/arm/trace.c
GEN target/i386/trace.c
GEN target/mips/trace.c
GEN target/ppc/trace.c
GEN target/s390x/trace.c
GEN target/sparc/trace.c
GEN ui/trace.c
GEN util/trace.c
GEN config-all-devices.mak
DEP /tmp/qemu-test/src/dtc/tests/dumptrees.c
DEP /tmp/qemu-test/src/dtc/tests/trees.S
DEP /tmp/qemu-test/src/dtc/tests/testutils.c
DEP /tmp/qemu-test/src/dtc/tests/value-labels.c
DEP /tmp/qemu-test/src/dtc/tests/asm_tree_dump.c
DEP /tmp/qemu-test/src/dtc/tests/truncated_memrsv.c
DEP /tmp/qemu-test/src/dtc/tests/truncated_string.c
DEP /tmp/qemu-test/src/dtc/tests/truncated_property.c
DEP /tmp/qemu-test/src/dtc/tests/check_full.c
DEP /tmp/qemu-test/src/dtc/tests/check_header.c
DEP /tmp/qemu-test/src/dtc/tests/check_path.c
DEP /tmp/qemu-test/src/dtc/tests/overlay_bad_fixup.c
DEP /tmp/qemu-test/src/dtc/tests/overlay.c
DEP /tmp/qemu-test/src/dtc/tests/subnode_iterate.c
DEP /tmp/qemu-test/src/dtc/tests/property_iterate.c
DEP /tmp/qemu-test/src/dtc/tests/integer-expressions.c
DEP /tmp/qemu-test/src/dtc/tests/utilfdt_test.c
DEP /tmp/qemu-test/src/dtc/tests/path_offset_aliases.c
DEP /tmp/qemu-test/src/dtc/tests/add_subnode_with_nops.c
DEP /tmp/qemu-test/src/dtc/tests/dtbs_equal_unordered.c
DEP /tmp/qemu-test/src/dtc/tests/dtb_reverse.c
DEP /tmp/qemu-test/src/dtc/tests/dtbs_equal_ordered.c
DEP /tmp/qemu-test/src/dtc/tests/extra-terminating-null.c
DEP /tmp/qemu-test/src/dtc/tests/incbin.c
DEP /tmp/qemu-test/src/dtc/tests/boot-cpuid.c
DEP /tmp/qemu-test/src/dtc/tests/phandle_format.c
DEP /tmp/qemu-test/src/dtc/tests/path-references.c
DEP /tmp/qemu-test/src/dtc/tests/references.c
DEP /tmp/qemu-test/src/dtc/tests/string_escapes.c
DEP /tmp/qemu-test/src/dtc/tests/propname_escapes.c
DEP /tmp/qemu-test/src/dtc/tests/appendprop2.c
DEP /tmp/qemu-test/src/dtc/tests/appendprop1.c
DEP /tmp/qemu-test/src/dtc/tests/del_node.c
DEP /tmp/qemu-test/src/dtc/tests/del_property.c
DEP /tmp/qemu-test/src/dtc/tests/setprop.c
DEP /tmp/qemu-test/src/dtc/tests/set_name.c
DEP /tmp/qemu-test/src/dtc/tests/rw_tree1.c
DEP /tmp/qemu-test/src/dtc/tests/open_pack.c
DEP /tmp/qemu-test/src/dtc/tests/nopulate.c
DEP /tmp/qemu-test/src/dtc/tests/mangle-layout.c
DEP /tmp/qemu-test/src/dtc/tests/move_and_save.c
DEP /tmp/qemu-test/src/dtc/tests/sw_states.c
DEP /tmp/qemu-test/src/dtc/tests/sw_tree1.c
DEP /tmp/qemu-test/src/dtc/tests/nop_node.c
DEP /tmp/qemu-test/src/dtc/tests/nop_property.c
DEP /tmp/qemu-test/src/dtc/tests/setprop_inplace.c
DEP /tmp/qemu-test/src/dtc/tests/stringlist.c
DEP /tmp/qemu-test/src/dtc/tests/addr_size_cells2.c
DEP /tmp/qemu-test/src/dtc/tests/addr_size_cells.c
DEP /tmp/qemu-test/src/dtc/tests/notfound.c
DEP /tmp/qemu-test/src/dtc/tests/sized_cells.c
DEP /tmp/qemu-test/src/dtc/tests/char_literal.c
DEP /tmp/qemu-test/src/dtc/tests/get_alias.c
DEP /tmp/qemu-test/src/dtc/tests/node_check_compatible.c
DEP /tmp/qemu-test/src/dtc/tests/node_offset_by_compatible.c
DEP /tmp/qemu-test/src/dtc/tests/node_offset_by_phandle.c
DEP /tmp/qemu-test/src/dtc/tests/node_offset_by_prop_value.c
DEP /tmp/qemu-test/src/dtc/tests/parent_offset.c
DEP /tmp/qemu-test/src/dtc/tests/supernode_atdepth_offset.c
DEP /tmp/qemu-test/src/dtc/tests/get_path.c
DEP /tmp/qemu-test/src/dtc/tests/get_phandle.c
DEP /tmp/qemu-test/src/dtc/tests/getprop.c
DEP /tmp/qemu-test/src/dtc/tests/get_name.c
DEP /tmp/qemu-test/src/dtc/tests/path_offset.c
DEP /tmp/qemu-test/src/dtc/tests/subnode_offset.c
DEP /tmp/qemu-test/src/dtc/tests/find_property.c
DEP /tmp/qemu-test/src/dtc/tests/root_node.c
DEP /tmp/qemu-test/src/dtc/tests/get_mem_rsv.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_overlay.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_addresses.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_empty_tree.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_strerror.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_rw.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_sw.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_wip.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_ro.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt.c
DEP /tmp/qemu-test/src/dtc/util.c
DEP /tmp/qemu-test/src/dtc/fdtoverlay.c
DEP /tmp/qemu-test/src/dtc/fdtput.c
DEP /tmp/qemu-test/src/dtc/fdtget.c
DEP /tmp/qemu-test/src/dtc/fdtdump.c
LEX convert-dtsv0-lexer.lex.c
DEP /tmp/qemu-test/src/dtc/srcpos.c
LEX dtc-lexer.lex.c
BISON dtc-parser.tab.c
DEP /tmp/qemu-test/src/dtc/treesource.c
DEP /tmp/qemu-test/src/dtc/fstree.c
DEP /tmp/qemu-test/src/dtc/livetree.c
DEP /tmp/qemu-test/src/dtc/flattree.c
DEP /tmp/qemu-test/src/dtc/dtc.c
DEP /tmp/qemu-test/src/dtc/data.c
DEP /tmp/qemu-test/src/dtc/checks.c
DEP convert-dtsv0-lexer.lex.c
DEP dtc-lexer.lex.c
DEP dtc-parser.tab.c
CHK version_gen.h
UPD version_gen.h
DEP /tmp/qemu-test/src/dtc/util.c
CC libfdt/fdt.o
CC libfdt/fdt_ro.o
CC libfdt/fdt_wip.o
CC libfdt/fdt_sw.o
CC libfdt/fdt_strerror.o
CC libfdt/fdt_rw.o
CC libfdt/fdt_empty_tree.o
CC libfdt/fdt_addresses.o
CC libfdt/fdt_overlay.o
AR libfdt/libfdt.a
x86_64-w64-mingw32-ar: creating libfdt/libfdt.a
a - libfdt/fdt.o
a - libfdt/fdt_ro.o
a - libfdt/fdt_wip.o
a - libfdt/fdt_sw.o
a - libfdt/fdt_rw.o
a - libfdt/fdt_strerror.o
a - libfdt/fdt_empty_tree.o
a - libfdt/fdt_addresses.o
a - libfdt/fdt_overlay.o
RC version.o
GEN qga/qapi-generated/qapi-gen
CC qapi/qapi-builtin-types.o
CC qapi/qapi-types-block-core.o
CC qapi/qapi-types-block.o
CC qapi/qapi-types-crypto.o
CC qapi/qapi-types-char.o
CC qapi/qapi-types.o
CC qapi/qapi-types-common.o
CC qapi/qapi-types-introspect.o
CC qapi/qapi-types-migration.o
CC qapi/qapi-types-job.o
CC qapi/qapi-types-misc.o
CC qapi/qapi-types-net.o
CC qapi/qapi-types-rocker.o
CC qapi/qapi-types-run-state.o
CC qapi/qapi-types-sockets.o
CC qapi/qapi-types-tpm.o
CC qapi/qapi-types-trace.o
CC qapi/qapi-types-transaction.o
CC qapi/qapi-types-ui.o
CC qapi/qapi-builtin-visit.o
CC qapi/qapi-visit.o
CC qapi/qapi-visit-block-core.o
CC qapi/qapi-visit-block.o
CC qapi/qapi-visit-char.o
CC qapi/qapi-visit-common.o
CC qapi/qapi-visit-crypto.o
CC qapi/qapi-visit-introspect.o
CC qapi/qapi-visit-job.o
CC qapi/qapi-visit-migration.o
CC qapi/qapi-visit-misc.o
CC qapi/qapi-visit-net.o
CC qapi/qapi-visit-rocker.o
CC qapi/qapi-visit-run-state.o
CC qapi/qapi-visit-sockets.o
CC qapi/qapi-visit-tpm.o
CC qapi/qapi-visit-trace.o
CC qapi/qapi-visit-transaction.o
CC qapi/qapi-visit-ui.o
CC qapi/qapi-events.o
CC qapi/qapi-events-block-core.o
CC qapi/qapi-events-block.o
CC qapi/qapi-events-char.o
CC qapi/qapi-events-common.o
CC qapi/qapi-events-crypto.o
CC qapi/qapi-events-introspect.o
CC qapi/qapi-events-job.o
CC qapi/qapi-events-migration.o
CC qapi/qapi-events-misc.o
CC qapi/qapi-events-net.o
CC qapi/qapi-events-rocker.o
CC qapi/qapi-events-run-state.o
CC qapi/qapi-events-sockets.o
CC qapi/qapi-events-tpm.o
CC qapi/qapi-events-trace.o
CC qapi/qapi-events-transaction.o
CC qapi/qapi-events-ui.o
CC qapi/qapi-introspect.o
CC qapi/qapi-visit-core.o
CC qapi/qapi-dealloc-visitor.o
CC qapi/qobject-input-visitor.o
CC qapi/qobject-output-visitor.o
CC qapi/qmp-registry.o
CC qapi/qmp-dispatch.o
CC qapi/string-input-visitor.o
CC qapi/string-output-visitor.o
CC qapi/opts-visitor.o
CC qapi/qapi-clone-visitor.o
CC qapi/qmp-event.o
CC qapi/qapi-util.o
CC qobject/qnull.o
CC qobject/qnum.o
CC qobject/qstring.o
CC qobject/qdict.o
CC qobject/qlist.o
CC qobject/qbool.o
CC qobject/qlit.o
CC qobject/qjson.o
CC qobject/qobject.o
CC qobject/json-lexer.o
CC qobject/json-streamer.o
CC qobject/json-parser.o
CC qobject/block-qdict.o
CC trace/simple.o
CC trace/control.o
CC trace/qmp.o
CC util/osdep.o
CC util/cutils.o
CC util/unicode.o
CC util/qemu-timer-common.o
CC util/bufferiszero.o
CC util/lockcnt.o
CC util/aiocb.o
CC util/async.o
CC util/aio-wait.o
CC util/thread-pool.o
CC util/qemu-timer.o
CC util/main-loop.o
CC util/iohandler.o
CC util/aio-win32.o
CC util/event_notifier-win32.o
CC util/oslib-win32.o
CC util/qemu-thread-win32.o
CC util/envlist.o
CC util/path.o
CC util/module.o
CC util/host-utils.o
CC util/bitmap.o
CC util/bitops.o
CC util/hbitmap.o
CC util/fifo8.o
CC util/cacheinfo.o
CC util/acl.o
CC util/error.o
CC util/qemu-error.o
CC util/id.o
CC util/iov.o
CC util/qemu-config.o
CC util/qemu-sockets.o
CC util/uri.o
CC util/notify.o
CC util/qemu-option.o
CC util/qemu-progress.o
CC util/keyval.o
CC util/hexdump.o
CC util/crc32c.o
CC util/uuid.o
CC util/throttle.o
CC util/getauxval.o
CC util/readline.o
CC util/rcu.o
CC util/qemu-coroutine.o
CC util/qemu-coroutine-lock.o
CC util/qemu-coroutine-io.o
CC util/qemu-coroutine-sleep.o
CC util/coroutine-win32.o
CC util/timed-average.o
CC util/buffer.o
CC util/base64.o
CC util/log.o
CC util/pagesize.o
CC util/qdist.o
CC util/qht.o
CC util/qsp.o
CC util/range.o
CC util/stats64.o
CC util/systemd.o
CC trace-root.o
CC util/iova-tree.o
CC accel/kvm/trace.o
CC accel/tcg/trace.o
CC audio/trace.o
CC block/trace.o
CC chardev/trace.o
CC crypto/trace.o
CC hw/9pfs/trace.o
CC hw/acpi/trace.o
CC hw/alpha/trace.o
CC hw/arm/trace.o
CC hw/audio/trace.o
CC hw/block/trace.o
CC hw/block/dataplane/trace.o
CC hw/char/trace.o
CC hw/display/trace.o
CC hw/dma/trace.o
CC hw/hppa/trace.o
CC hw/i2c/trace.o
CC hw/i386/trace.o
CC hw/i386/xen/trace.o
CC hw/ide/trace.o
CC hw/input/trace.o
CC hw/intc/trace.o
CC hw/isa/trace.o
CC hw/mem/trace.o
CC hw/misc/trace.o
CC hw/misc/macio/trace.o
CC hw/net/trace.o
CC hw/nvram/trace.o
CC hw/pci/trace.o
CC hw/pci-host/trace.o
CC hw/ppc/trace.o
CC hw/rdma/trace.o
CC hw/rdma/vmw/trace.o
CC hw/s390x/trace.o
CC hw/scsi/trace.o
CC hw/sd/trace.o
CC hw/sparc/trace.o
CC hw/sparc64/trace.o
CC hw/timer/trace.o
CC hw/tpm/trace.o
CC hw/usb/trace.o
CC hw/vfio/trace.o
CC hw/virtio/trace.o
CC hw/watchdog/trace.o
CC hw/xen/trace.o
CC io/trace.o
CC linux-user/trace.o
CC migration/trace.o
CC nbd/trace.o
CC net/trace.o
CC qapi/trace.o
CC qom/trace.o
CC scsi/trace.o
CC target/arm/trace.o
CC target/i386/trace.o
CC target/mips/trace.o
CC target/ppc/trace.o
CC target/s390x/trace.o
CC target/sparc/trace.o
CC ui/trace.o
CC util/trace.o
CC crypto/pbkdf-stub.o
CC stubs/arch-query-cpu-def.o
CC stubs/arch-query-cpu-model-expansion.o
CC stubs/arch-query-cpu-model-comparison.o
CC stubs/arch-query-cpu-model-baseline.o
CC stubs/bdrv-next-monitor-owned.o
CC stubs/blk-commit-all.o
CC stubs/blockdev-close-all-bdrv-states.o
CC stubs/clock-warp.o
CC stubs/cpu-get-clock.o
CC stubs/cpu-get-icount.o
CC stubs/dump.o
CC stubs/error-printf.o
CC stubs/fdset.o
CC stubs/gdbstub.o
CC stubs/get-vm-name.o
CC stubs/iothread.o
CC stubs/iothread-lock.o
CC stubs/is-daemonized.o
CC stubs/machine-init-done.o
CC stubs/migr-blocker.o
CC stubs/change-state-handler.o
CC stubs/notify-event.o
CC stubs/monitor.o
CC stubs/qtest.o
CC stubs/replay.o
CC stubs/runstate-check.o
CC stubs/set-fd-handler.o
CC stubs/slirp.o
CC stubs/sysbus.o
CC stubs/tpm.o
CC stubs/trace-control.o
CC stubs/uuid.o
CC stubs/vm-stop.o
CC stubs/vmstate.o
CC stubs/fd-register.o
CC stubs/qmp_memory_device.o
CC stubs/target-monitor-defs.o
CC stubs/pc_madt_cpu_entry.o
CC stubs/target-get-monitor-def.o
CC stubs/vmgenid.o
CC stubs/xen-common.o
CC stubs/xen-hvm.o
CC stubs/pci-host-piix.o
CC stubs/ram-block.o
CC stubs/ramfb.o
GEN qemu-img-cmds.h
CC block.o
CC blockjob.o
CC job.o
CC qemu-io-cmds.o
CC replication.o
CC block/raw-format.o
CC block/qcow.o
CC block/vmdk.o
CC block/vdi.o
CC block/cloop.o
CC block/bochs.o
CC block/vpc.o
CC block/vvfat.o
CC block/dmg.o
CC block/qcow2.o
CC block/qcow2-refcount.o
CC block/qcow2-cluster.o
CC block/qcow2-snapshot.o
CC block/qcow2-cache.o
CC block/qcow2-bitmap.o
CC block/qed.o
CC block/qed-l2-cache.o
CC block/qed-table.o
CC block/qed-cluster.o
CC block/qed-check.o
CC block/vhdx.o
CC block/vhdx-endian.o
CC block/vhdx-log.o
CC block/quorum.o
CC block/parallels.o
CC block/blkdebug.o
CC block/blkverify.o
CC block/blkreplay.o
CC block/blklogwrites.o
CC block/block-backend.o
CC block/snapshot.o
CC block/qapi.o
CC block/file-win32.o
CC block/win32-aio.o
CC block/null.o
CC block/mirror.o
CC block/commit.o
CC block/io.o
CC block/create.o
CC block/throttle-groups.o
CC block/nbd.o
CC block/nbd-client.o
CC block/sheepdog.o
CC block/accounting.o
CC block/dirty-bitmap.o
CC block/write-threshold.o
CC block/backup.o
CC block/replication.o
CC block/throttle.o
CC block/copy-on-read.o
CC block/crypto.o
CC nbd/server.o
CC nbd/client.o
CC nbd/common.o
CC scsi/utils.o
CC scsi/pr-manager-stub.o
CC block/curl.o
CC block/ssh.o
CC block/dmg-bz2.o
CC crypto/init.o
CC crypto/hash.o
CC crypto/hash-nettle.o
CC crypto/hmac.o
CC crypto/hmac-nettle.o
CC crypto/aes.o
CC crypto/desrfb.o
CC crypto/cipher.o
CC crypto/tlscreds.o
CC crypto/tlscredsanon.o
CC crypto/tlscredspsk.o
CC crypto/tlscredsx509.o
CC crypto/tlssession.o
CC crypto/secret.o
CC crypto/random-gnutls.o
CC crypto/pbkdf.o
CC crypto/pbkdf-nettle.o
CC crypto/ivgen.o
CC crypto/ivgen-essiv.o
CC crypto/ivgen-plain.o
CC crypto/ivgen-plain64.o
CC crypto/afsplit.o
CC crypto/xts.o
CC crypto/block.o
CC crypto/block-qcow.o
CC crypto/block-luks.o
CC io/channel.o
CC io/channel-buffer.o
CC io/channel-command.o
CC io/channel-file.o
CC io/channel-socket.o
CC io/channel-tls.o
CC io/channel-watch.o
CC io/channel-websock.o
CC io/channel-util.o
CC io/dns-resolver.o
CC io/net-listener.o
CC io/task.o
CC qom/object.o
CC qom/container.o
CC qom/qom-qobject.o
CC qom/object_interfaces.o
CC qemu-io.o
CC qemu-edid.o
CC hw/display/edid-generate.o
CC blockdev.o
CC blockdev-nbd.o
CC bootdevice.o
CC iothread.o
CC job-qmp.o
CC qdev-monitor.o
CC device-hotplug.o
CC os-win32.o
CC bt-host.o
CC bt-vhci.o
CC dma-helpers.o
CC vl.o
CC tpm.o
CC device_tree.o
CC qapi/qapi-commands.o
CC qapi/qapi-commands-block-core.o
CC qapi/qapi-commands-block.o
CC qapi/qapi-commands-char.o
CC qapi/qapi-commands-common.o
CC qapi/qapi-commands-crypto.o
CC qapi/qapi-commands-introspect.o
CC qapi/qapi-commands-job.o
CC qapi/qapi-commands-migration.o
CC qapi/qapi-commands-misc.o
CC qapi/qapi-commands-net.o
CC qapi/qapi-commands-rocker.o
CC qapi/qapi-commands-run-state.o
CC qapi/qapi-commands-tpm.o
CC qapi/qapi-commands-sockets.o
CC qapi/qapi-commands-trace.o
CC qapi/qapi-commands-transaction.o
CC qapi/qapi-commands-ui.o
CC qmp.o
CC hmp.o
CC cpus-common.o
CC audio/audio.o
CC audio/noaudio.o
CC audio/wavaudio.o
CC audio/mixeng.o
CC audio/dsoundaudio.o
CC audio/audio_win_int.o
CC audio/wavcapture.o
CC backends/rng.o
CC backends/rng-egd.o
CC backends/tpm.o
CC backends/hostmem.o
CC backends/hostmem-ram.o
CC backends/cryptodev.o
CC backends/cryptodev-builtin.o
CC backends/cryptodev-vhost.o
CC block/stream.o
CC chardev/msmouse.o
CC chardev/wctablet.o
CC chardev/testdev.o
CC disas/arm.o
CXX disas/arm-a64.o
CC disas/i386.o
CXX disas/libvixl/vixl/utils.o
CXX disas/libvixl/vixl/compiler-intrinsics.o
CXX disas/libvixl/vixl/a64/instructions-a64.o
CXX disas/libvixl/vixl/a64/decoder-a64.o
CXX disas/libvixl/vixl/a64/disasm-a64.o
CC hw/acpi/core.o
CC hw/acpi/piix4.o
CC hw/acpi/pcihp.o
CC hw/acpi/ich9.o
CC hw/acpi/tco.o
CC hw/acpi/cpu_hotplug.o
CC hw/acpi/memory_hotplug.o
CC hw/acpi/cpu.o
CC hw/acpi/nvdimm.o
CC hw/acpi/vmgenid.o
CC hw/acpi/bios-linker-loader.o
CC hw/acpi/acpi_interface.o
CC hw/acpi/aml-build.o
CC hw/acpi/ipmi.o
CC hw/acpi/acpi-stub.o
CC hw/acpi/ipmi-stub.o
CC hw/audio/sb16.o
CC hw/audio/es1370.o
CC hw/audio/ac97.o
CC hw/audio/adlib.o
CC hw/audio/fmopl.o
CC hw/audio/gus.o
CC hw/audio/gusemu_hal.o
CC hw/audio/gusemu_mixer.o
CC hw/audio/cs4231a.o
CC hw/audio/intel-hda.o
CC hw/audio/hda-codec.o
CC hw/audio/pcspk.o
CC hw/audio/wm8750.o
CC hw/audio/pl041.o
CC hw/audio/lm4549.o
CC hw/audio/marvell_88w8618.o
CC hw/audio/soundhw.o
CC hw/block/block.o
CC hw/block/cdrom.o
CC hw/block/hd-geometry.o
CC hw/block/fdc.o
CC hw/block/m25p80.o
CC hw/block/nand.o
CC hw/block/pflash_cfi01.o
CC hw/block/pflash_cfi02.o
CC hw/block/ecc.o
CC hw/block/onenand.o
CC hw/block/nvme.o
CC hw/bt/l2cap.o
CC hw/bt/core.o
CC hw/bt/sdp.o
CC hw/bt/hci.o
CC hw/bt/hid.o
CC hw/bt/hci-csr.o
CC hw/char/ipoctal232.o
CC hw/char/parallel.o
CC hw/char/parallel-isa.o
CC hw/char/pl011.o
CC hw/char/serial.o
CC hw/char/serial-isa.o
CC hw/char/serial-pci.o
CC hw/char/virtio-console.o
CC hw/char/cmsdk-apb-uart.o
CC hw/char/cadence_uart.o
CC hw/char/debugcon.o
CC hw/char/imx_serial.o
CC hw/core/qdev.o
CC hw/core/qdev-properties.o
CC hw/core/bus.o
CC hw/core/reset.o
CC hw/core/qdev-fw.o
CC hw/core/fw-path-provider.o
CC hw/core/irq.o
CC hw/core/hotplug.o
CC hw/core/nmi.o
CC hw/core/stream.o
CC hw/core/ptimer.o
CC hw/core/sysbus.o
CC hw/core/machine.o
CC hw/core/loader.o
CC hw/core/qdev-properties-system.o
CC hw/core/register.o
CC hw/core/or-irq.o
CC hw/core/split-irq.o
CC hw/core/platform-bus.o
CC hw/core/generic-loader.o
CC hw/core/null-machine.o
CC hw/cpu/core.o
CC hw/display/ramfb.o
CC hw/display/ramfb-standalone.o
CC hw/display/ads7846.o
CC hw/display/cirrus_vga.o
CC hw/display/cirrus_vga_isa.o
CC hw/display/pl110.o
CC hw/display/sii9022.o
CC hw/display/ssd0303.o
CC hw/display/ssd0323.o
CC hw/display/vga-pci.o
CC hw/display/edid-region.o
CC hw/display/vga-isa.o
CC hw/display/vmware_vga.o
CC hw/display/bochs-display.o
CC hw/display/blizzard.o
CC hw/display/exynos4210_fimd.o
CC hw/display/framebuffer.o
CC hw/display/tc6393xb.o
CC hw/dma/pl080.o
CC hw/dma/pl330.o
CC hw/dma/i8257.o
CC hw/dma/xilinx_axidma.o
CC hw/dma/xlnx-zynq-devcfg.o
CC hw/dma/xlnx-zdma.o
CC hw/gpio/max7310.o
CC hw/gpio/pl061.o
CC hw/gpio/zaurus.o
CC hw/gpio/gpio_key.o
CC hw/i2c/core.o
CC hw/i2c/smbus.o
CC hw/i2c/smbus_eeprom.o
CC hw/i2c/i2c-ddc.o
CC hw/i2c/versatile_i2c.o
CC hw/i2c/smbus_ich9.o
CC hw/i2c/pm_smbus.o
CC hw/i2c/bitbang_i2c.o
CC hw/i2c/exynos4210_i2c.o
CC hw/i2c/imx_i2c.o
CC hw/i2c/aspeed_i2c.o
CC hw/ide/atapi.o
CC hw/ide/core.o
CC hw/ide/qdev.o
CC hw/ide/pci.o
CC hw/ide/isa.o
CC hw/ide/piix.o
CC hw/ide/microdrive.o
CC hw/ide/ahci.o
CC hw/ide/ich.o
CC hw/ide/ahci-allwinner.o
CC hw/input/hid.o
CC hw/input/lm832x.o
CC hw/input/pckbd.o
CC hw/input/pl050.o
CC hw/input/ps2.o
CC hw/input/stellaris_input.o
CC hw/input/tsc2005.o
CC hw/input/virtio-input.o
CC hw/input/virtio-input-hid.o
CC hw/intc/i8259_common.o
CC hw/intc/i8259.o
CC hw/intc/pl190.o
CC hw/intc/xlnx-pmu-iomod-intc.o
CC hw/intc/xlnx-zynqmp-ipi.o
CC hw/intc/imx_avic.o
CC hw/intc/imx_gpcv2.o
CC hw/intc/realview_gic.o
CC hw/intc/ioapic_common.o
CC hw/intc/arm_gic_common.o
CC hw/intc/arm_gic.o
CC hw/intc/arm_gicv2m.o
CC hw/intc/arm_gicv3_common.o
CC hw/intc/arm_gicv3.o
CC hw/intc/arm_gicv3_dist.o
CC hw/intc/arm_gicv3_redist.o
CC hw/intc/arm_gicv3_its_common.o
CC hw/intc/intc.o
CC hw/ipack/ipack.o
CC hw/ipack/tpci200.o
CC hw/ipmi/ipmi.o
CC hw/ipmi/ipmi_bmc_sim.o
CC hw/ipmi/ipmi_bmc_extern.o
CC hw/ipmi/isa_ipmi_kcs.o
CC hw/ipmi/isa_ipmi_bt.o
CC hw/isa/isa-bus.o
CC hw/isa/isa-superio.o
CC hw/mem/pc-dimm.o
CC hw/isa/apm.o
CC hw/mem/memory-device.o
CC hw/mem/nvdimm.o
CC hw/misc/applesmc.o
CC hw/misc/max111x.o
CC hw/misc/tmp105.o
CC hw/misc/tmp421.o
CC hw/misc/debugexit.o
CC hw/misc/sga.o
CC hw/misc/pc-testdev.o
CC hw/misc/pci-testdev.o
CC hw/misc/edu.o
CC hw/misc/pca9552.o
CC hw/misc/unimp.o
CC hw/misc/vmcoreinfo.o
CC hw/misc/arm_l2x0.o
CC hw/misc/arm_integrator_debug.o
CC hw/misc/a9scu.o
CC hw/misc/arm11scu.o
CC hw/net/ne2000.o
CC hw/net/eepro100.o
CC hw/net/pcnet-pci.o
CC hw/net/pcnet.o
CC hw/net/e1000.o
CC hw/net/e1000x_common.o
CC hw/net/net_tx_pkt.o
CC hw/net/net_rx_pkt.o
CC hw/net/e1000e.o
CC hw/net/e1000e_core.o
CC hw/net/rtl8139.o
CC hw/net/vmxnet3.o
CC hw/net/smc91c111.o
CC hw/net/lan9118.o
CC hw/net/ne2000-isa.o
CC hw/net/xgmac.o
CC hw/net/xilinx_axienet.o
CC hw/net/allwinner_emac.o
CC hw/net/imx_fec.o
CC hw/net/cadence_gem.o
CC hw/net/stellaris_enet.o
CC hw/net/ftgmac100.o
CC hw/net/rocker/rocker.o
CC hw/net/rocker/rocker_fp.o
CC hw/net/rocker/rocker_desc.o
CC hw/net/rocker/rocker_world.o
CC hw/net/rocker/rocker_of_dpa.o
CC hw/net/can/can_sja1000.o
CC hw/net/can/can_kvaser_pci.o
CC hw/net/can/can_pcm3680_pci.o
CC hw/net/can/can_mioe3680_pci.o
CC hw/nvram/eeprom93xx.o
CC hw/nvram/fw_cfg.o
CC hw/nvram/chrp_nvram.o
CC hw/pci-bridge/pci_bridge_dev.o
CC hw/pci-bridge/pcie_root_port.o
CC hw/pci-bridge/gen_pcie_root_port.o
CC hw/pci-bridge/pcie_pci_bridge.o
CC hw/pci-bridge/xio3130_upstream.o
CC hw/pci-bridge/pci_expander_bridge.o
CC hw/pci-bridge/xio3130_downstream.o
CC hw/pci-bridge/ioh3420.o
CC hw/pci-bridge/i82801b11.o
CC hw/pci-host/pam.o
CC hw/pci-host/versatile.o
CC hw/pci-host/piix.o
CC hw/pci-host/q35.o
CC hw/pci-host/designware.o
CC hw/pci-host/gpex.o
CC hw/pci/pci.o
CC hw/pci/pci_bridge.o
CC hw/pci/msix.o
CC hw/pci/msi.o
CC hw/pci/shpc.o
CC hw/pci/slotid_cap.o
CC hw/pci/pci_host.o
CC hw/pci/pcie_host.o
CC hw/pci/pcie.o
CC hw/pci/pcie_aer.o
CC hw/pci/pcie_port.o
CC hw/pci/pci-stub.o
CC hw/pcmcia/pcmcia.o
CC hw/scsi/scsi-disk.o
CC hw/scsi/scsi-generic.o
CC hw/scsi/scsi-bus.o
CC hw/scsi/lsi53c895a.o
CC hw/scsi/mptsas.o
CC hw/scsi/mptconfig.o
CC hw/scsi/mptendian.o
CC hw/scsi/megasas.o
CC hw/scsi/vmw_pvscsi.o
CC hw/scsi/esp.o
CC hw/scsi/esp-pci.o
CC hw/sd/pl181.o
CC hw/sd/ssi-sd.o
CC hw/sd/sd.o
CC hw/sd/core.o
CC hw/sd/sdmmc-internal.o
CC hw/sd/sdhci.o
CC hw/smbios/smbios.o
CC hw/smbios/smbios_type_38.o
CC hw/smbios/smbios-stub.o
CC hw/smbios/smbios_type_38-stub.o
CC hw/ssi/pl022.o
CC hw/ssi/ssi.o
CC hw/ssi/xilinx_spips.o
CC hw/ssi/aspeed_smc.o
CC hw/ssi/stm32f2xx_spi.o
CC hw/ssi/mss-spi.o
CC hw/timer/arm_timer.o
CC hw/timer/arm_mptimer.o
CC hw/timer/armv7m_systick.o
CC hw/timer/a9gtimer.o
CC hw/timer/cadence_ttc.o
CC hw/timer/ds1338.o
CC hw/timer/hpet.o
CC hw/timer/i8254_common.o
CC hw/timer/i8254.o
CC hw/timer/pl031.o
CC hw/timer/twl92230.o
CC hw/timer/imx_epit.o
CC hw/timer/imx_gpt.o
CC hw/timer/xlnx-zynqmp-rtc.o
CC hw/timer/stm32f2xx_timer.o
CC hw/timer/aspeed_timer.o
CC hw/timer/cmsdk-apb-timer.o
CC hw/timer/cmsdk-apb-dualtimer.o
CC hw/timer/mss-timer.o
CC hw/tpm/tpm_util.o
CC hw/tpm/tpm_tis.o
CC hw/tpm/tpm_crb.o
CC hw/usb/core.o
CC hw/usb/combined-packet.o
CC hw/usb/bus.o
CC hw/usb/libhw.o
CC hw/usb/desc.o
CC hw/usb/desc-msos.o
CC hw/usb/hcd-uhci.o
CC hw/usb/hcd-ohci.o
CC hw/usb/hcd-ehci.o
CC hw/usb/hcd-ehci-sysbus.o
CC hw/usb/hcd-ehci-pci.o
CC hw/usb/hcd-xhci.o
CC hw/usb/hcd-xhci-nec.o
CC hw/usb/hcd-musb.o
CC hw/usb/dev-hub.o
CC hw/usb/dev-hid.o
CC hw/usb/dev-wacom.o
CC hw/usb/dev-storage.o
CC hw/usb/dev-uas.o
CC hw/usb/dev-audio.o
CC hw/usb/dev-serial.o
CC hw/usb/dev-network.o
CC hw/usb/dev-bluetooth.o
CC hw/usb/dev-smartcard-reader.o
CC hw/usb/host-stub.o
CC hw/virtio/virtio-bus.o
CC hw/virtio/virtio-rng.o
CC hw/virtio/virtio-pci.o
CC hw/virtio/virtio-mmio.o
CC hw/virtio/vhost-stub.o
CC hw/watchdog/watchdog.o
CC hw/watchdog/cmsdk-apb-watchdog.o
CC hw/watchdog/wdt_i6300esb.o
CC hw/watchdog/wdt_ib700.o
CC hw/watchdog/wdt_aspeed.o
CC migration/migration.o
CC migration/socket.o
CC migration/fd.o
CC migration/exec.o
CC migration/tls.o
CC migration/channel.o
CC migration/savevm.o
CC migration/colo.o
CC migration/colo-failover.o
CC migration/vmstate.o
CC migration/vmstate-types.o
CC migration/page_cache.o
CC migration/qemu-file.o
CC migration/global_state.o
CC migration/qemu-file-channel.o
CC migration/xbzrle.o
CC migration/postcopy-ram.o
CC migration/qjson.o
CC migration/block-dirty-bitmap.o
CC migration/block.o
CC net/net.o
CC net/queue.o
CC net/checksum.o
CC net/util.o
CC net/hub.o
CC net/socket.o
CC net/dump.o
CC net/eth.o
CC net/slirp.o
CC net/filter.o
CC net/filter-mirror.o
CC net/filter-buffer.o
CC net/colo-compare.o
CC net/colo.o
CC net/filter-rewriter.o
CC net/filter-replay.o
CC net/tap-win32.o
CC net/can/can_core.o
CC net/can/can_host.o
CC qom/cpu.o
CC replay/replay.o
CC replay/replay-internal.o
CC replay/replay-events.o
CC replay/replay-time.o
CC replay/replay-input.o
CC replay/replay-char.o
CC replay/replay-snapshot.o
CC replay/replay-net.o
CC replay/replay-audio.o
CC slirp/cksum.o
CC slirp/if.o
CC slirp/ip_icmp.o
CC slirp/ip6_icmp.o
CC slirp/ip6_input.o
CC slirp/ip6_output.o
CC slirp/ip_input.o
CC slirp/ip_output.o
CC slirp/dnssearch.o
CC slirp/dhcpv6.o
CC slirp/slirp.o
CC slirp/mbuf.o
CC slirp/misc.o
CC slirp/sbuf.o
CC slirp/socket.o
CC slirp/tcp_input.o
CC slirp/tcp_output.o
CC slirp/tcp_subr.o
CC slirp/tcp_timer.o
CC slirp/udp.o
CC slirp/udp6.o
CC slirp/bootp.o
CC slirp/tftp.o
CC slirp/arp_table.o
CC slirp/ndp_table.o
CC slirp/ncsi.o
CC ui/keymaps.o
CC ui/console.o
CC ui/cursor.o
CC ui/qemu-pixman.o
CC ui/input.o
CC ui/input-keymap.o
CC ui/input-legacy.o
CC ui/vnc.o
CC ui/vnc-enc-zlib.o
CC ui/vnc-enc-hextile.o
CC ui/vnc-enc-tight.o
CC ui/vnc-palette.o
CC ui/vnc-enc-zrle.o
CC ui/vnc-auth-vencrypt.o
CC ui/vnc-ws.o
CC ui/vnc-jobs.o
CC ui/sdl2.o
CC ui/sdl2-input.o
CC ui/sdl2-2d.o
CC ui/gtk.o
CC chardev/char.o
CC chardev/char-console.o
CC chardev/char-fe.o
CC chardev/char-file.o
CC chardev/char-io.o
CC chardev/char-mux.o
CC chardev/char-null.o
CC chardev/char-pipe.o
CC chardev/char-ringbuf.o
CC chardev/char-serial.o
CC chardev/char-socket.o
CC chardev/char-stdio.o
CC chardev/char-udp.o
CC chardev/char-win.o
CC chardev/char-win-stdio.o
CC qga/commands.o
CC qga/guest-agent-command-state.o
CC qga/main.o
CC qga/commands-win32.o
CC qga/channel-win32.o
CC qga/service-win32.o
CC qga/vss-win32.o
AS optionrom/multiboot.o
AS optionrom/linuxboot.o
CC optionrom/linuxboot_dma.o
CC qga/qapi-generated/qga-qapi-types.o
AS optionrom/kvmvapic.o
CC qga/qapi-generated/qga-qapi-visit.o
CC qga/qapi-generated/qga-qapi-commands.o
AR libqemuutil.a
CC qemu-img.o
BUILD optionrom/multiboot.img
BUILD optionrom/linuxboot.img
BUILD optionrom/linuxboot_dma.img
BUILD optionrom/kvmvapic.img
BUILD optionrom/multiboot.raw
BUILD optionrom/linuxboot_dma.raw
BUILD optionrom/linuxboot.raw
BUILD optionrom/kvmvapic.raw
SIGN optionrom/linuxboot.bin
SIGN optionrom/multiboot.bin
SIGN optionrom/linuxboot_dma.bin
SIGN optionrom/kvmvapic.bin
LINK qemu-img.exe
LINK qemu-io.exe
LINK qemu-edid.exe
LINK qemu-ga.exe
GEN x86_64-softmmu/hmp-commands.h
GEN x86_64-softmmu/hmp-commands-info.h
GEN x86_64-softmmu/config-target.h
CC x86_64-softmmu/exec.o
CC x86_64-softmmu/tcg/tcg.o
CC x86_64-softmmu/tcg/tcg-op.o
CC x86_64-softmmu/tcg/optimize.o
CC x86_64-softmmu/tcg/tcg-op-vec.o
CC x86_64-softmmu/tcg/tcg-op-gvec.o
CC x86_64-softmmu/tcg/tcg-common.o
CC x86_64-softmmu/fpu/softfloat.o
CC x86_64-softmmu/disas.o
GEN aarch64-softmmu/hmp-commands.h
GEN aarch64-softmmu/hmp-commands-info.h
GEN aarch64-softmmu/config-target.h
GEN x86_64-softmmu/gdbstub-xml.c
CC aarch64-softmmu/exec.o
CC x86_64-softmmu/arch_init.o
CC aarch64-softmmu/tcg/tcg.o
CC x86_64-softmmu/cpus.o
CC x86_64-softmmu/monitor.o
CC aarch64-softmmu/tcg/tcg-op.o
CC x86_64-softmmu/gdbstub.o
CC aarch64-softmmu/tcg/tcg-op-vec.o
CC aarch64-softmmu/tcg/tcg-op-gvec.o
CC aarch64-softmmu/tcg/tcg-common.o
CC aarch64-softmmu/tcg/optimize.o
CC x86_64-softmmu/balloon.o
CC aarch64-softmmu/fpu/softfloat.o
CC aarch64-softmmu/disas.o
GEN aarch64-softmmu/gdbstub-xml.c
CC aarch64-softmmu/arch_init.o
CC aarch64-softmmu/cpus.o
CC aarch64-softmmu/monitor.o
CC x86_64-softmmu/ioport.o
CC aarch64-softmmu/gdbstub.o
CC aarch64-softmmu/balloon.o
CC aarch64-softmmu/ioport.o
CC aarch64-softmmu/numa.o
CC aarch64-softmmu/qtest.o
CC x86_64-softmmu/numa.o
CC aarch64-softmmu/memory.o
CC aarch64-softmmu/memory_mapping.o
CC aarch64-softmmu/dump.o
CC aarch64-softmmu/migration/ram.o
CC aarch64-softmmu/accel/accel.o
CC aarch64-softmmu/accel/stubs/hax-stub.o
CC x86_64-softmmu/qtest.o
CC aarch64-softmmu/accel/stubs/hvf-stub.o
CC aarch64-softmmu/accel/stubs/whpx-stub.o
CC aarch64-softmmu/accel/stubs/kvm-stub.o
CC aarch64-softmmu/accel/tcg/tcg-all.o
CC aarch64-softmmu/accel/tcg/cputlb.o
CC aarch64-softmmu/accel/tcg/tcg-runtime.o
CC x86_64-softmmu/memory.o
CC x86_64-softmmu/memory_mapping.o
CC x86_64-softmmu/dump.o
CC x86_64-softmmu/win_dump.o
CC x86_64-softmmu/migration/ram.o
CC x86_64-softmmu/accel/accel.o
CC x86_64-softmmu/accel/stubs/hvf-stub.o
CC x86_64-softmmu/accel/stubs/whpx-stub.o
CC x86_64-softmmu/accel/stubs/kvm-stub.o
CC x86_64-softmmu/accel/tcg/tcg-all.o
CC x86_64-softmmu/accel/tcg/cputlb.o
CC x86_64-softmmu/accel/tcg/tcg-runtime.o
CC x86_64-softmmu/accel/tcg/tcg-runtime-gvec.o
CC x86_64-softmmu/accel/tcg/cpu-exec.o
CC x86_64-softmmu/accel/tcg/cpu-exec-common.o
CC x86_64-softmmu/accel/tcg/translate-all.o
CC x86_64-softmmu/accel/tcg/translator.o
CC x86_64-softmmu/hw/block/virtio-blk.o
CC x86_64-softmmu/hw/block/dataplane/virtio-blk.o
CC aarch64-softmmu/accel/tcg/tcg-runtime-gvec.o
CC x86_64-softmmu/hw/char/virtio-serial-bus.o
CC x86_64-softmmu/hw/display/virtio-gpu.o
CC x86_64-softmmu/hw/display/vga.o
CC aarch64-softmmu/accel/tcg/cpu-exec.o
CC x86_64-softmmu/hw/display/virtio-gpu-3d.o
CC aarch64-softmmu/accel/tcg/cpu-exec-common.o
CC x86_64-softmmu/hw/display/virtio-gpu-pci.o
CC x86_64-softmmu/hw/display/virtio-vga.o
CC x86_64-softmmu/hw/intc/apic.o
CC x86_64-softmmu/hw/intc/apic_common.o
CC x86_64-softmmu/hw/intc/ioapic.o
CC aarch64-softmmu/accel/tcg/translator.o
CC aarch64-softmmu/accel/tcg/translate-all.o
CC x86_64-softmmu/hw/isa/lpc_ich9.o
CC aarch64-softmmu/hw/adc/stm32f2xx_adc.o
CC x86_64-softmmu/hw/misc/pvpanic.o
CC x86_64-softmmu/hw/net/virtio-net.o
CC aarch64-softmmu/hw/block/virtio-blk.o
CC x86_64-softmmu/hw/net/vhost_net.o
CC aarch64-softmmu/hw/block/dataplane/virtio-blk.o
CC aarch64-softmmu/hw/char/exynos4210_uart.o
CC x86_64-softmmu/hw/scsi/virtio-scsi.o
CC aarch64-softmmu/hw/char/omap_uart.o
CC x86_64-softmmu/hw/scsi/virtio-scsi-dataplane.o
CC x86_64-softmmu/hw/timer/mc146818rtc.o
CC x86_64-softmmu/hw/virtio/virtio.o
CC x86_64-softmmu/hw/virtio/virtio-balloon.o
CC aarch64-softmmu/hw/char/digic-uart.o
CC x86_64-softmmu/hw/virtio/virtio-crypto.o
CC x86_64-softmmu/hw/virtio/virtio-crypto-pci.o
CC x86_64-softmmu/hw/i386/multiboot.o
CC x86_64-softmmu/hw/i386/pc.o
CC aarch64-softmmu/hw/char/stm32f2xx_usart.o
CC x86_64-softmmu/hw/i386/pc_piix.o
CC aarch64-softmmu/hw/char/bcm2835_aux.o
CC x86_64-softmmu/hw/i386/pc_q35.o
CC x86_64-softmmu/hw/i386/pc_sysfw.o
CC x86_64-softmmu/hw/i386/x86-iommu.o
CC aarch64-softmmu/hw/char/virtio-serial-bus.o
CC aarch64-softmmu/hw/cpu/arm11mpcore.o
CC x86_64-softmmu/hw/i386/intel_iommu.o
CC x86_64-softmmu/hw/i386/amd_iommu.o
CC aarch64-softmmu/hw/cpu/realview_mpcore.o
CC x86_64-softmmu/hw/i386/vmport.o
CC x86_64-softmmu/hw/i386/vmmouse.o
CC aarch64-softmmu/hw/cpu/a9mpcore.o
CC x86_64-softmmu/hw/i386/kvmvapic.o
CC aarch64-softmmu/hw/cpu/a15mpcore.o
CC aarch64-softmmu/hw/display/omap_dss.o
CC aarch64-softmmu/hw/display/omap_lcdc.o
CC aarch64-softmmu/hw/display/pxa2xx_lcd.o
CC aarch64-softmmu/hw/display/bcm2835_fb.o
CC aarch64-softmmu/hw/display/vga.o
CC x86_64-softmmu/hw/i386/acpi-build.o
CC aarch64-softmmu/hw/display/virtio-gpu.o
CC aarch64-softmmu/hw/display/virtio-gpu-3d.o
CC aarch64-softmmu/hw/display/virtio-gpu-pci.o
CC aarch64-softmmu/hw/display/dpcd.o
CC x86_64-softmmu/target/i386/helper.o
CC aarch64-softmmu/hw/display/xlnx_dp.o
CC aarch64-softmmu/hw/dma/xlnx_dpdma.o
CC aarch64-softmmu/hw/dma/omap_dma.o
CC aarch64-softmmu/hw/dma/soc_dma.o
CC x86_64-softmmu/target/i386/cpu.o
CC aarch64-softmmu/hw/dma/pxa2xx_dma.o
CC aarch64-softmmu/hw/dma/bcm2835_dma.o
CC aarch64-softmmu/hw/gpio/omap_gpio.o
CC aarch64-softmmu/hw/gpio/imx_gpio.o
CC aarch64-softmmu/hw/gpio/bcm2835_gpio.o
CC aarch64-softmmu/hw/i2c/omap_i2c.o
CC aarch64-softmmu/hw/input/pxa2xx_keypad.o
CC aarch64-softmmu/hw/input/tsc210x.o
CC x86_64-softmmu/target/i386/gdbstub.o
CC aarch64-softmmu/hw/intc/armv7m_nvic.o
CC aarch64-softmmu/hw/intc/exynos4210_gic.o
CC aarch64-softmmu/hw/intc/exynos4210_combiner.o
CC aarch64-softmmu/hw/intc/omap_intc.o
CC x86_64-softmmu/target/i386/xsave_helper.o
CC aarch64-softmmu/hw/intc/bcm2835_ic.o
CC aarch64-softmmu/hw/intc/bcm2836_control.o
CC aarch64-softmmu/hw/intc/allwinner-a10-pic.o
CC aarch64-softmmu/hw/intc/aspeed_vic.o
CC x86_64-softmmu/target/i386/translate.o
CC x86_64-softmmu/target/i386/bpt_helper.o
CC aarch64-softmmu/hw/intc/arm_gicv3_cpuif.o
CC x86_64-softmmu/target/i386/cc_helper.o
CC x86_64-softmmu/target/i386/excp_helper.o
CC x86_64-softmmu/target/i386/fpu_helper.o
CC x86_64-softmmu/target/i386/int_helper.o
CC aarch64-softmmu/hw/misc/arm_sysctl.o
CC aarch64-softmmu/hw/misc/cbus.o
CC x86_64-softmmu/target/i386/mem_helper.o
CC aarch64-softmmu/hw/misc/exynos4210_pmu.o
CC x86_64-softmmu/target/i386/misc_helper.o
CC x86_64-softmmu/target/i386/mpx_helper.o
CC x86_64-softmmu/target/i386/seg_helper.o
CC x86_64-softmmu/target/i386/smm_helper.o
CC aarch64-softmmu/hw/misc/exynos4210_clk.o
CC x86_64-softmmu/target/i386/svm_helper.o
CC x86_64-softmmu/target/i386/machine.o
CC aarch64-softmmu/hw/misc/exynos4210_rng.o
CC aarch64-softmmu/hw/misc/imx_ccm.o
CC aarch64-softmmu/hw/misc/imx31_ccm.o
CC x86_64-softmmu/target/i386/arch_memory_mapping.o
CC x86_64-softmmu/target/i386/arch_dump.o
CC x86_64-softmmu/target/i386/monitor.o
CC x86_64-softmmu/target/i386/kvm-stub.o
In file included from /tmp/qemu-test/src/hw/char/bcm2835_aux.c:25:0:
/tmp/qemu-test/src/hw/char/bcm2835_aux.c: In function 'bcm2835_aux_write':
/tmp/qemu-test/src/hw/char/bcm2835_aux.c:161:38: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'uint64_t {aka long long unsigned int}' [-Werror=format=]
qemu_log_mask(LOG_UNIMP, "%s: unsupported attempt to enable SPI "
^
/tmp/qemu-test/src/include/qemu/log.h:85:22: note: in definition of macro 'qemu_log_mask'
qemu_log(FMT, ## __VA_ARGS__); \
^~~
/tmp/qemu-test/src/hw/char/bcm2835_aux.c:162:49: note: format string is defined here
"or disable UART: 0x%lx\n", __func__, value);
~~^
%llx
cc1: all warnings being treated as errors
CC x86_64-softmmu/target/i386/hyperv-stub.o
CC x86_64-softmmu/target/i386/hax-all.o
CC x86_64-softmmu/target/i386/hax-mem.o
make[1]: *** [/tmp/qemu-test/src/rules.mak:69: hw/char/bcm2835_aux.o] Error 1
make[1]: *** Waiting for unfinished jobs....
CC x86_64-softmmu/target/i386/hax-windows.o
CC aarch64-softmmu/hw/misc/imx25_ccm.o
CC x86_64-softmmu/target/i386/sev-stub.o
GEN trace/generated-helpers.c
CC x86_64-softmmu/trace/control-target.o
CC x86_64-softmmu/gdbstub-xml.o
CC x86_64-softmmu/trace/generated-helpers.o
LINK x86_64-softmmu/qemu-system-x86_64w.exe
In file included from /tmp/qemu-test/src/hw/intc/bcm2836_control.c:18:0:
/tmp/qemu-test/src/hw/intc/bcm2836_control.c: In function 'bcm2836_control_write':
/tmp/qemu-test/src/hw/intc/bcm2836_control.c:207:40: error: format '%lx' expects argument of type 'long unsigned int', but argument 4 has type 'uint64_t {aka long long unsigned int}' [-Werror=format=]
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%"HWADDR_PRIx" 0x%lx\n",
^
/tmp/qemu-test/src/include/qemu/log.h:85:22: note: in definition of macro 'qemu_log_mask'
qemu_log(FMT, ## __VA_ARGS__); \
^~~
/tmp/qemu-test/src/hw/intc/bcm2836_control.c:207:77: note: format string is defined here
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%"HWADDR_PRIx" 0x%lx\n",
~~^
%llx
cc1: all warnings being treated as errors
make[1]: *** [/tmp/qemu-test/src/rules.mak:69: hw/intc/bcm2836_control.o] Error 1
make: *** [Makefile:483: subdir-aarch64-softmmu] Error 2
make: *** Waiting for unfinished jobs....
GEN x86_64-softmmu/qemu-system-x86_64.exe
Traceback (most recent call last):
File "./tests/docker/docker.py", line 563, in <module>
sys.exit(main())
File "./tests/docker/docker.py", line 560, in main
return args.cmdobj.run(args, argv)
File "./tests/docker/docker.py", line 306, in run
return Docker().run(argv, args.keep, quiet=args.quiet)
File "./tests/docker/docker.py", line 274, in run
quiet=quiet)
File "./tests/docker/docker.py", line 181, in _do_check
return subprocess.check_call(self._command + cmd, **kwargs)
File "/usr/lib64/python2.7/subprocess.py", line 186, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['sudo', '-n', 'docker', 'run', '--label', 'com.qemu.instance.uuid=98095c06df7d11e88b0652540069c830', '-u', '1000', '--security-opt', 'seccomp=unconfined', '--rm', '--net=none', '-e', 'TARGET_LIST=', '-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=8', '-e', 'DEBUG=', '-e', 'SHOW_ENV=1', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', '/home/patchew/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', '/var/tmp/patchew-tester-tmp-ujg3tlbv/src/docker-src.2018-11-03-11.31.40.16898:/var/tmp/qemu:z,ro', 'qemu:fedora', '/var/tmp/qemu/run', 'test-mingw']' returned non-zero exit status 2
make[1]: *** [tests/docker/Makefile.include:217: docker-run] Error 1
make[1]: Leaving directory '/var/tmp/patchew-tester-tmp-ujg3tlbv/src'
make: *** [tests/docker/Makefile.include:251: docker-run-test-mingw@fedora] Error 2
real 2m13.270s
user 0m5.716s
sys 0m4.209s
=== OUTPUT END ===
Test command exited with code: 2
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem)
2018-11-02 0:12 [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem) Philippe Mathieu-Daudé
` (8 preceding siblings ...)
2018-11-03 15:33 ` no-reply
@ 2018-11-05 15:20 ` Peter Maydell
2018-11-06 3:28 ` no-reply
10 siblings, 0 replies; 26+ messages in thread
From: Peter Maydell @ 2018-11-05 15:20 UTC (permalink / raw)
To: Philippe Mathieu-Daudé; +Cc: Guenter Roeck, QEMU Developers, qemu-arm
On 2 November 2018 at 00:12, Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
> Hi,
>
> This series is a mix of a previous work I had for the raspi, and a patch from
> Guenter: https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg03153.html
>
> The final patch keep Guenter ideas and comments, but is mostly a rewrite.
> I dropped the A2W code from this work, it doesn't seems unuseful to me.
>
> Guenter can you test this series?
>
> I kept Guenter S-o-b and (C), is that OK? (Guenter?, Peter?)
Yes, that's the general approach the project takes. If you've
made changes to the patches yourself you should note those with
something like
[me: changed foo, bar, baz]
after Guenter's signoff and before your own.
thanks
-- PMM
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [Qemu-devel] [PATCH for 3.1 v2 1/7] MAINTAINERS: Add an entry for the Raspberry Pi machines
2018-11-02 0:12 ` [Qemu-devel] [PATCH for 3.1 v2 1/7] MAINTAINERS: Add an entry for the Raspberry Pi machines Philippe Mathieu-Daudé
@ 2018-11-05 15:25 ` Peter Maydell
2018-11-05 17:06 ` Andrew Baumann
0 siblings, 1 reply; 26+ messages in thread
From: Peter Maydell @ 2018-11-05 15:25 UTC (permalink / raw)
To: Philippe Mathieu-Daudé, Andrew Baumann
Cc: Guenter Roeck, QEMU Developers, qemu-arm
On 2 November 2018 at 00:12, Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
> So far the Raspi machines use the BCM2836 SoC which includes
> a BCM2835 for the peripherals.
>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
> MAINTAINERS | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f2360efe3e..c41ea5ed3f 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -683,6 +683,12 @@ F: hw/arm/nrf51_soc.c
> F: hw/arm/microbit.c
> F: include/hw/arm/nrf51_soc.h
>
> +Raspberry Pi
> +L: qemu-arm@nongnu.org
> +S: Odd Fixes
> +F: hw/*/bcm283*
> +F: include/hw/*/bcm283*
> +
We should also have F:hw/arm/raspi.c
Andrew, as the original submitter of the Raspberry Pi code
would you like to be listed as a maintainer for it?
thanks
-- PMM
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [Qemu-devel] [PATCH for 3.2 v2 2/7] hw/misc/bcm2835_property: Handle the 'domain state' property
2018-11-02 0:12 ` [Qemu-devel] [PATCH for 3.2 v2 2/7] hw/misc/bcm2835_property: Handle the 'domain state' property Philippe Mathieu-Daudé
@ 2018-11-05 15:33 ` Peter Maydell
0 siblings, 0 replies; 26+ messages in thread
From: Peter Maydell @ 2018-11-05 15:33 UTC (permalink / raw)
To: Philippe Mathieu-Daudé; +Cc: Guenter Roeck, QEMU Developers, qemu-arm
On 2 November 2018 at 00:12, Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
> hw/misc/bcm2835_property.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c
> index 145427ae0f..5d332324bd 100644
> --- a/hw/misc/bcm2835_property.c
> +++ b/hw/misc/bcm2835_property.c
> @@ -121,6 +121,12 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
> resplen = 8;
> break;
>
> + case 0x00030030: /* domain state */
> + qemu_log_mask(LOG_UNIMP,
> + "bcm2835_property: %x get domain state NYI\n", tag);
> + resplen = 8;
> + break;
> +
Our handling of "Set power state" has a slightly more sophisticated
"always say yes" implementation, but we have other properties which
we handle unimplemented like this, so if the kernel is happy with
this we don't need to do anything more sophisticated.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
thanks
-- PMM
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [Qemu-devel] [PATCH for 3.2 v2 3/7] hw/arm/bcm2835: Use 0x prefix for hex numbers
2018-11-02 0:12 ` [Qemu-devel] [PATCH for 3.2 v2 3/7] hw/arm/bcm2835: Use 0x prefix for hex numbers Philippe Mathieu-Daudé
@ 2018-11-05 15:39 ` Peter Maydell
2018-11-05 16:12 ` Philippe Mathieu-Daudé
0 siblings, 1 reply; 26+ messages in thread
From: Peter Maydell @ 2018-11-05 15:39 UTC (permalink / raw)
To: Philippe Mathieu-Daudé; +Cc: Guenter Roeck, QEMU Developers, qemu-arm
On 2 November 2018 at 00:12, Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
> hw/char/bcm2835_aux.c | 2 +-
> hw/intc/bcm2836_control.c | 4 ++--
> hw/misc/bcm2835_property.c | 2 +-
> 3 files changed, 4 insertions(+), 4 deletions(-)
Commit message says it's just adding 0x prefixes, but the
patch adds extra logging of new numbers that weren't there
before. I don't think the patch needs splitting, but the
commit message could be improved.
Also, the compile test says some of these new additions
are using the wrong kind of format string specifier.
>
> diff --git a/hw/char/bcm2835_aux.c b/hw/char/bcm2835_aux.c
> index 0364596c55..9632e8972c 100644
> --- a/hw/char/bcm2835_aux.c
> +++ b/hw/char/bcm2835_aux.c
> @@ -159,7 +159,7 @@ static void bcm2835_aux_write(void *opaque, hwaddr offset, uint64_t value,
> case AUX_ENABLES:
> if (value != 1) {
> qemu_log_mask(LOG_UNIMP, "%s: unsupported attempt to enable SPI "
> - "or disable UART\n", __func__);
> + "or disable UART: 0x%lx\n", __func__, value);
uint64_t needs PRIx64, not %lx.
> }
> break;
>
> diff --git a/hw/intc/bcm2836_control.c b/hw/intc/bcm2836_control.c
> index cfa5bc7365..96cc53f8a7 100644
> --- a/hw/intc/bcm2836_control.c
> +++ b/hw/intc/bcm2836_control.c
> @@ -204,8 +204,8 @@ static void bcm2836_control_write(void *opaque, hwaddr offset,
> } else if (offset >= REG_MBOX0_RDCLR && offset < REG_LIMIT) {
> s->mailboxes[(offset - REG_MBOX0_RDCLR) >> 2] &= ~val;
> } else {
> - qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
> - __func__, offset);
> + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%"HWADDR_PRIx" 0x%lx\n",
> + __func__, offset, val);
Ditto. If you want to print the value you should also say in the
log message string what the second hex number in it is.
(Mostly we don't seem to worry about printing the data value
for "write to bogus device address" messages.)
> return;
> }
>
> diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c
> index 5d332324bd..c715cbaef6 100644
> --- a/hw/misc/bcm2835_property.c
> +++ b/hw/misc/bcm2835_property.c
> @@ -277,7 +277,7 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
>
> default:
> qemu_log_mask(LOG_GUEST_ERROR,
> - "bcm2835_property: unhandled tag %08x\n", tag);
> + "bcm2835_property: unhandled tag 0x%08x\n", tag);
> break;
> }
>
> --
> 2.17.2
thanks
-- PMM
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [Qemu-devel] [PATCH for 3.2 v2 4/7] hw/arm/bcm2835: Rename some definitions
2018-11-02 0:13 ` [Qemu-devel] [PATCH for 3.2 v2 4/7] hw/arm/bcm2835: Rename some definitions Philippe Mathieu-Daudé
@ 2018-11-05 15:39 ` Peter Maydell
0 siblings, 0 replies; 26+ messages in thread
From: Peter Maydell @ 2018-11-05 15:39 UTC (permalink / raw)
To: Philippe Mathieu-Daudé; +Cc: Guenter Roeck, QEMU Developers, qemu-arm
On 2 November 2018 at 00:13, Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
> The UART1 is part of the AUX peripheral,
> the PCM_CLOCK (yet unimplemented) is part of the CPRMAN.
>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
> hw/arm/bcm2835_peripherals.c | 2 +-
> include/hw/arm/raspi_platform.h | 4 ++--
> 2 files changed, 3 insertions(+), 3 deletions(-)
>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
thanks
-- PMM
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [Qemu-devel] [PATCH for 3.2 v2 5/7] hw/arm/bcm2835: Add various unimplemented peripherals
2018-11-02 0:13 ` [Qemu-devel] [PATCH for 3.2 v2 5/7] hw/arm/bcm2835: Add various unimplemented peripherals Philippe Mathieu-Daudé
@ 2018-11-05 15:51 ` Peter Maydell
0 siblings, 0 replies; 26+ messages in thread
From: Peter Maydell @ 2018-11-05 15:51 UTC (permalink / raw)
To: Philippe Mathieu-Daudé; +Cc: Guenter Roeck, QEMU Developers, qemu-arm
On 2 November 2018 at 00:13, Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
> Base addresses and sizes taken from the "BCM2835 ARM Peripherals"
> datasheet from February 06 2012:
> https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
> hw/arm/bcm2835_peripherals.c | 26 ++++++++++++++++++++++++++
> include/hw/arm/bcm2835_peripherals.h | 10 ++++++++++
> include/hw/arm/raspi_platform.h | 2 ++
> 3 files changed, 38 insertions(+)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
thanks
-- PMM
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [Qemu-devel] [PATCH for 3.2 v2 7/7] MAINTAINERS: Volunteer to review Raspi patches
2018-11-02 0:13 ` [Qemu-devel] [PATCH for 3.2 v2 7/7] MAINTAINERS: Volunteer to review Raspi patches Philippe Mathieu-Daudé
@ 2018-11-05 15:51 ` Peter Maydell
0 siblings, 0 replies; 26+ messages in thread
From: Peter Maydell @ 2018-11-05 15:51 UTC (permalink / raw)
To: Philippe Mathieu-Daudé; +Cc: Guenter Roeck, QEMU Developers, qemu-arm
On 2 November 2018 at 00:13, Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
> MAINTAINERS | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index c41ea5ed3f..a76d047659 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -684,6 +684,7 @@ F: hw/arm/microbit.c
> F: include/hw/arm/nrf51_soc.h
>
> Raspberry Pi
> +R: Philippe Mathieu-Daudé <f4bug@amsat.org>
> L: qemu-arm@nongnu.org
> S: Odd Fixes
> F: hw/*/bcm283*
> --
> 2.17.2
>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
thanks
-- PMM
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [Qemu-devel] [PATCH for 3.2 v2 6/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem)
2018-11-02 0:13 ` [Qemu-devel] [PATCH for 3.2 v2 6/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem) Philippe Mathieu-Daudé
@ 2018-11-05 16:02 ` Peter Maydell
0 siblings, 0 replies; 26+ messages in thread
From: Peter Maydell @ 2018-11-05 16:02 UTC (permalink / raw)
To: Philippe Mathieu-Daudé; +Cc: Guenter Roeck, QEMU Developers, qemu-arm
On 2 November 2018 at 00:13, Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
> Add basic support for BCM283x CPRMAN. Provide support for reading and
> writing CPRMAN registers and initialize registers with sensible default
> values. During runtime retain any written values.
>
> Basic CPRMAN support is necessary and sufficient to boot Linux on raspi2
> and raspi3 systems.
>
> Without this change, recent Linux kernels fail to boot on raspi2 and
> raspi3. raspi2 images experience with various divide by 0 errors and
> hang. raspi3 images fail to initialize the console (ttyS1).
>
> Register addresses and fields taken from the "BCM2835 ARM Peripherals"
> datasheet from February 06 2012:
> https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
> hw/arm/bcm2835_peripherals.c | 16 +-
> hw/misc/Makefile.objs | 1 +
> hw/misc/bcm2835_cprman.c | 277 +++++++++++++++++++++++++++
> hw/misc/trace-events | 8 +
> include/hw/arm/bcm2835_peripherals.h | 3 +-
> include/hw/misc/bcm2835_cprman.h | 28 +++
> 6 files changed, 331 insertions(+), 2 deletions(-)
> create mode 100644 hw/misc/bcm2835_cprman.c
> create mode 100644 include/hw/misc/bcm2835_cprman.h
>
> diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c
> index 108c058d17..11fb098063 100644
> --- a/hw/arm/bcm2835_peripherals.c
> +++ b/hw/arm/bcm2835_peripherals.c
> @@ -99,6 +99,11 @@ static void bcm2835_peripherals_init(Object *obj)
> object_property_add_const_link(OBJECT(&s->property), "dma-mr",
> OBJECT(&s->gpu_bus_mr), &error_abort);
>
> + /* Clock subsystem */
> + object_initialize(&s->cprman, sizeof(s->cprman), TYPE_BCM2835_CPRMAN);
> + object_property_add_child(obj, "cprman", OBJECT(&s->cprman), NULL);
> + qdev_set_parent_bus(DEVICE(&s->cprman), sysbus_get_default());
Rather than this set of 3 calls we can use one call:
sysbus_init_child_obj(obj, "cprman", &s->cprman, sizeof(s->cprman),
TYPE_BCM2835_CPRMAN)
This is shorter and also avoids a refcount leak that means the
child object isn't correctly unlinked from the parent bus if the
parent device is destroyed.
(As separate cleanup, we could fix the existing cases of this pattern
in this file.)
> +
> /* Random Number Generator */
> object_initialize(&s->rng, sizeof(s->rng), TYPE_BCM2835_RNG);
> object_property_add_child(obj, "rng", OBJECT(&s->rng), NULL);
> @@ -258,6 +263,13 @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
> sysbus_connect_irq(SYS_BUS_DEVICE(&s->property), 0,
> qdev_get_gpio_in(DEVICE(&s->mboxes), MBOX_CHAN_PROPERTY));
>
> + /* Clock subsystem */
> + object_property_set_bool(OBJECT(&s->cprman), true, "realized", &err);
> + if (err) {
> + error_propagate(errp, err);
> + return;
> + }
> +
> /* Random Number Generator */
> object_property_set_bool(OBJECT(&s->rng), true, "realized", &err);
> if (err) {
> @@ -265,6 +277,9 @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
> return;
> }
>
> + memory_region_add_subregion(&s->peri_mr, CPRMAN_OFFSET,
> + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->cprman), 0));
> +
> memory_region_add_subregion(&s->peri_mr, RNG_OFFSET,
> sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->rng), 0));
>
> @@ -350,7 +365,6 @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
> }
>
> create_unimp(s, &s->pm, "bcm2835-pm", PM_OFFSET, 0x1000);
> - create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x1000);
> create_unimp(s, &s->a2w, "bcm2835-a2w", 0x102000, 0x1000);
> create_unimp(s, &s->i2s, "bcm2835-i2s", I2S_OFFSET, 0x100);
> create_unimp(s, &s->smi, "bcm2835-smi", SMI_OFFSET, 0x100);
> diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
> index 680350b3c3..93c11a2d4d 100644
> --- a/hw/misc/Makefile.objs
> +++ b/hw/misc/Makefile.objs
> @@ -53,6 +53,7 @@ obj-$(CONFIG_OMAP) += omap_tap.o
> obj-$(CONFIG_RASPI) += bcm2835_mbox.o
> obj-$(CONFIG_RASPI) += bcm2835_property.o
> obj-$(CONFIG_RASPI) += bcm2835_rng.o
> +obj-$(CONFIG_RASPI) += bcm2835_cprman.o
> obj-$(CONFIG_SLAVIO) += slavio_misc.o
> obj-$(CONFIG_ZYNQ) += zynq_slcr.o
> obj-$(CONFIG_ZYNQ) += zynq-xadc.o
> diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c
> new file mode 100644
> index 0000000000..df7e92e77f
> --- /dev/null
> +++ b/hw/misc/bcm2835_cprman.c
> @@ -0,0 +1,277 @@
> +/*
> + * BCM2835 Clock subsystem (poor man's version)
Rather than saying this we should have a comment that says
that this is missing functionality and giving a summary
of what it does and does not implement.
> + * https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
> + *
> + * Copyright (C) 2018 Guenter Roeck <linux@roeck-us.net>
> + * Copyright (C) 2018 Philippe Mathieu-Daudé <f4bug@amsat.org>
> + *
> + * SPDX-License-Identifier: GPL-2.0-or-later
We don't use SPDX tags in QEMU at the moment, but I guess it's
clear enough what this means.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu/log.h"
> +#include "hw/misc/bcm2835_cprman.h"
> +#include "hw/register.h"
> +#include "trace.h"
> +
> +FIELD(CM, PASSWD, 24, 8)
> +
> +FIELD(CM_CTL, SRC, 0, 4)
> +FIELD(CM_CTL, ENABLE, 4, 1)
> +FIELD(CM_CTL, KILL, 5, 1)
> +FIELD(CM_CTL, GATE, 6, 1)
> +FIELD(CM_CTL, BUSY, 7, 1)
> +FIELD(CM_CTL, BUSYD, 8, 1)
> +FIELD(CM_CTL, FRAC, 9, 1)
> +
> +FIELD(CM_DIV, FRAC, 0, 12)
> +FIELD(CM_DIV, INTEGER, 12, 12)
> +
> +enum cprman_clock_source {
> + SRC_GND = 0,
> + SRC_OSC = 1,
> + SRC_TEST_DBG0 = 2,
> + SRC_TEST_DBG1 = 3,
> + SRC_PLLA_CORE = 4,
> + SRC_PLLC_CORE0 = 5,
> + SRC_PLLD_CORE = 6,
> + SRC_PLLH_AUX = 7,
> + SRC_PLLC_CORE1 = 8,
> + SRC_PLLC_CORE2 = 9
> +};
> +
> +static const char *src_name(int src)
> +{
> + static const char *src_names[16] = {
> + [SRC_GND] = "GND",
> + [SRC_OSC] = "OSC",
> + [SRC_TEST_DBG0] = "TEST_DBG0",
> + [SRC_TEST_DBG1] = "TEST_DBG1",
> + [SRC_PLLA_CORE] = "PLLA_CORE",
> + [SRC_PLLC_CORE0] = "PLLC_CORE0",
> + [SRC_PLLD_CORE] = "PLLD_CORE",
> + [SRC_PLLH_AUX] = "PLLH_AUX",
> + [SRC_PLLC_CORE1] = "PLLC_CORE1",
> + [SRC_PLLC_CORE2] = "PLLC_CORE2",
> + };
> + return src_names[src] ? src_names[src] : "UNKN";
I suspect it's not possible to get here with an array
index that's out of range, but I think it's easier to
review and to be sure the code isn't going to walk off the
end of the array if there's an explicit bounds check here.
Similarly for the regs[] array and others below.
thanks
-- PMM
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [Qemu-devel] [PATCH for 3.2 v2 3/7] hw/arm/bcm2835: Use 0x prefix for hex numbers
2018-11-05 15:39 ` Peter Maydell
@ 2018-11-05 16:12 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 26+ messages in thread
From: Philippe Mathieu-Daudé @ 2018-11-05 16:12 UTC (permalink / raw)
To: Peter Maydell, Philippe Mathieu-Daudé
Cc: qemu-arm, QEMU Developers, Guenter Roeck
On 5/11/18 16:39, Peter Maydell wrote:
> On 2 November 2018 at 00:12, Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>> ---
>> hw/char/bcm2835_aux.c | 2 +-
>> hw/intc/bcm2836_control.c | 4 ++--
>> hw/misc/bcm2835_property.c | 2 +-
>> 3 files changed, 4 insertions(+), 4 deletions(-)
>
> Commit message says it's just adding 0x prefixes, but the
> patch adds extra logging of new numbers that weren't there
> before. I don't think the patch needs splitting, but the
> commit message could be improved.
OK
>
> Also, the compile test says some of these new additions
> are using the wrong kind of format string specifier.
Yes, sorry I forgot to run this test.
>
>>
>> diff --git a/hw/char/bcm2835_aux.c b/hw/char/bcm2835_aux.c
>> index 0364596c55..9632e8972c 100644
>> --- a/hw/char/bcm2835_aux.c
>> +++ b/hw/char/bcm2835_aux.c
>> @@ -159,7 +159,7 @@ static void bcm2835_aux_write(void *opaque, hwaddr offset, uint64_t value,
>> case AUX_ENABLES:
>> if (value != 1) {
>> qemu_log_mask(LOG_UNIMP, "%s: unsupported attempt to enable SPI "
>> - "or disable UART\n", __func__);
>> + "or disable UART: 0x%lx\n", __func__, value);
>
> uint64_t needs PRIx64, not %lx.
>
>> }
>> break;
>>
>> diff --git a/hw/intc/bcm2836_control.c b/hw/intc/bcm2836_control.c
>> index cfa5bc7365..96cc53f8a7 100644
>> --- a/hw/intc/bcm2836_control.c
>> +++ b/hw/intc/bcm2836_control.c
>> @@ -204,8 +204,8 @@ static void bcm2836_control_write(void *opaque, hwaddr offset,
>> } else if (offset >= REG_MBOX0_RDCLR && offset < REG_LIMIT) {
>> s->mailboxes[(offset - REG_MBOX0_RDCLR) >> 2] &= ~val;
>> } else {
>> - qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
>> - __func__, offset);
>> + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%"HWADDR_PRIx" 0x%lx\n",
>> + __func__, offset, val);
>
> Ditto. If you want to print the value you should also say in the
> log message string what the second hex number in it is.
> (Mostly we don't seem to worry about printing the data value
> for "write to bogus device address" messages.)
Hmm OK, I guess I added this to understand the firmware initialization,
so some are probably UNIMP rather than GUEST_ERRORS (The firmware is
built by people having access to the specs).
>
>> return;
>> }
>>
>> diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c
>> index 5d332324bd..c715cbaef6 100644
>> --- a/hw/misc/bcm2835_property.c
>> +++ b/hw/misc/bcm2835_property.c
>> @@ -277,7 +277,7 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
>>
>> default:
>> qemu_log_mask(LOG_GUEST_ERROR,
>> - "bcm2835_property: unhandled tag %08x\n", tag);
>> + "bcm2835_property: unhandled tag 0x%08x\n", tag);
>> break;
>> }
>>
>> --
>> 2.17.2
>
> thanks
> -- PMM
>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [Qemu-devel] [PATCH for 3.1 v2 1/7] MAINTAINERS: Add an entry for the Raspberry Pi machines
2018-11-05 15:25 ` Peter Maydell
@ 2018-11-05 17:06 ` Andrew Baumann
2018-11-05 17:57 ` Peter Maydell
0 siblings, 1 reply; 26+ messages in thread
From: Andrew Baumann @ 2018-11-05 17:06 UTC (permalink / raw)
To: Peter Maydell, Philippe Mathieu-Daudé
Cc: Guenter Roeck, QEMU Developers, qemu-arm
> From: Peter Maydell <peter.maydell@linaro.org>
> Sent: Monday, 5 November 2018 07:26
>
> On 2 November 2018 at 00:12, Philippe Mathieu-Daudé <f4bug@amsat.org>
> wrote:
> > So far the Raspi machines use the BCM2836 SoC which includes a BCM2835
> > for the peripherals.
> >
> > Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> > ---
> > MAINTAINERS | 6 ++++++
> > 1 file changed, 6 insertions(+)
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS index f2360efe3e..c41ea5ed3f
> > 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -683,6 +683,12 @@ F: hw/arm/nrf51_soc.c
> > F: hw/arm/microbit.c
> > F: include/hw/arm/nrf51_soc.h
> >
> > +Raspberry Pi
> > +L: qemu-arm@nongnu.org
> > +S: Odd Fixes
> > +F: hw/*/bcm283*
> > +F: include/hw/*/bcm283*
> > +
>
> We should also have F:hw/arm/raspi.c
>
> Andrew, as the original submitter of the Raspberry Pi code would you like to
> be listed as a maintainer for it?
Thanks for asking; probably not -- I'm happy to review the odd patch if my input would be helpful, but I haven't worked on it for years, and I don't have spare cycles, so I'd just be a bottleneck.
Andrew
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [Qemu-devel] [PATCH for 3.1 v2 1/7] MAINTAINERS: Add an entry for the Raspberry Pi machines
2018-11-05 17:06 ` Andrew Baumann
@ 2018-11-05 17:57 ` Peter Maydell
2018-11-05 17:59 ` Andrew Baumann
0 siblings, 1 reply; 26+ messages in thread
From: Peter Maydell @ 2018-11-05 17:57 UTC (permalink / raw)
To: Andrew Baumann
Cc: Philippe Mathieu-Daudé, Guenter Roeck, QEMU Developers, qemu-arm
On 5 November 2018 at 17:06, Andrew Baumann
<Andrew.Baumann@microsoft.com> wrote:
> From: Peter Maydell <peter.maydell@linaro.org>
>> Andrew, as the original submitter of the Raspberry Pi code would you like to
>> be listed as a maintainer for it?
>
> Thanks for asking; probably not -- I'm happy to review the odd patch
> if my input would be helpful, but I haven't worked on it for years,
> and I don't have spare cycles, so I'd just be a bottleneck.
Sure, no problem. Would you like to be listed as a "reviewer"
(means people will CC you on patches, basically), or not at all?
We could maybe downgrade it to Orphan from Odd Fixes, unless
Philippe wants to volunteer as an "odd fixes" maintainer...
thanks
-- PMM
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [Qemu-devel] [PATCH for 3.1 v2 1/7] MAINTAINERS: Add an entry for the Raspberry Pi machines
2018-11-05 17:57 ` Peter Maydell
@ 2018-11-05 17:59 ` Andrew Baumann
0 siblings, 0 replies; 26+ messages in thread
From: Andrew Baumann @ 2018-11-05 17:59 UTC (permalink / raw)
To: Peter Maydell
Cc: Philippe Mathieu-Daudé, Guenter Roeck, QEMU Developers, qemu-arm
> From: Peter Maydell <peter.maydell@linaro.org>
> Sent: Monday, 5 November 2018 09:58
>
> On 5 November 2018 at 17:06, Andrew Baumann
> <Andrew.Baumann@microsoft.com> wrote:
> > From: Peter Maydell <peter.maydell@linaro.org>
> >> Andrew, as the original submitter of the Raspberry Pi code would you
> >> like to be listed as a maintainer for it?
> >
> > Thanks for asking; probably not -- I'm happy to review the odd patch
> > if my input would be helpful, but I haven't worked on it for years,
> > and I don't have spare cycles, so I'd just be a bottleneck.
>
> Sure, no problem. Would you like to be listed as a "reviewer"
> (means people will CC you on patches, basically), or not at all?
Sure, reviewer is fine with me.
Andrew
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem)
2018-11-02 0:12 [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem) Philippe Mathieu-Daudé
` (9 preceding siblings ...)
2018-11-05 15:20 ` Peter Maydell
@ 2018-11-06 3:28 ` no-reply
10 siblings, 0 replies; 26+ messages in thread
From: no-reply @ 2018-11-06 3:28 UTC (permalink / raw)
To: f4bug; +Cc: famz, peter.maydell, linux, qemu-arm, qemu-devel
Hi,
This series failed docker-mingw@fedora build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.
Type: series
Message-id: 20181102001303.32640-1-f4bug@amsat.org
Subject: [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem)
=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-mingw@fedora SHOW_ENV=1 J=8
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
Switched to a new branch 'test'
e88244ce63 MAINTAINERS: Volunteer to review Raspi patches
ccd97451e2 hw/arm/bcm2835: Add basic support for cprman (clock subsystem)
c040413670 hw/arm/bcm2835: Add various unimplemented peripherals
8738d4cc1d hw/arm/bcm2835: Rename some definitions
5cad3a8d3f hw/arm/bcm2835: Use 0x prefix for hex numbers
d5b6b933ad hw/misc/bcm2835_property: Handle the 'domain state' property
14f6bd3c7f MAINTAINERS: Add an entry for the Raspberry Pi machines
=== OUTPUT BEGIN ===
BUILD fedora
make[1]: Entering directory '/var/tmp/patchew-tester-tmp-pvww0as4/src'
GEN /var/tmp/patchew-tester-tmp-pvww0as4/src/docker-src.2018-11-05-22.26.31.3469/qemu.tar
Cloning into '/var/tmp/patchew-tester-tmp-pvww0as4/src/docker-src.2018-11-05-22.26.31.3469/qemu.tar.vroot'...
done.
Checking out files: 20% (1319/6453)
Checking out files: 21% (1356/6453)
Checking out files: 22% (1420/6453)
Checking out files: 23% (1485/6453)
Checking out files: 24% (1549/6453)
Checking out files: 25% (1614/6453)
Checking out files: 26% (1678/6453)
Checking out files: 27% (1743/6453)
Checking out files: 28% (1807/6453)
Checking out files: 29% (1872/6453)
Checking out files: 30% (1936/6453)
Checking out files: 31% (2001/6453)
Checking out files: 32% (2065/6453)
Checking out files: 33% (2130/6453)
Checking out files: 34% (2195/6453)
Checking out files: 35% (2259/6453)
Checking out files: 36% (2324/6453)
Checking out files: 37% (2388/6453)
Checking out files: 38% (2453/6453)
Checking out files: 39% (2517/6453)
Checking out files: 40% (2582/6453)
Checking out files: 41% (2646/6453)
Checking out files: 42% (2711/6453)
Checking out files: 43% (2775/6453)
Checking out files: 44% (2840/6453)
Checking out files: 45% (2904/6453)
Checking out files: 46% (2969/6453)
Checking out files: 47% (3033/6453)
Checking out files: 48% (3098/6453)
Checking out files: 49% (3162/6453)
Checking out files: 50% (3227/6453)
Checking out files: 51% (3292/6453)
Checking out files: 52% (3356/6453)
Checking out files: 53% (3421/6453)
Checking out files: 53% (3423/6453)
Checking out files: 54% (3485/6453)
Checking out files: 55% (3550/6453)
Checking out files: 56% (3614/6453)
Checking out files: 57% (3679/6453)
Checking out files: 58% (3743/6453)
Checking out files: 59% (3808/6453)
Checking out files: 60% (3872/6453)
Checking out files: 61% (3937/6453)
Checking out files: 62% (4001/6453)
Checking out files: 63% (4066/6453)
Checking out files: 64% (4130/6453)
Checking out files: 65% (4195/6453)
Checking out files: 66% (4259/6453)
Checking out files: 67% (4324/6453)
Checking out files: 68% (4389/6453)
Checking out files: 69% (4453/6453)
Checking out files: 70% (4518/6453)
Checking out files: 71% (4582/6453)
Checking out files: 72% (4647/6453)
Checking out files: 73% (4711/6453)
Checking out files: 74% (4776/6453)
Checking out files: 75% (4840/6453)
Checking out files: 76% (4905/6453)
Checking out files: 77% (4969/6453)
Checking out files: 78% (5034/6453)
Checking out files: 79% (5098/6453)
Checking out files: 80% (5163/6453)
Checking out files: 81% (5227/6453)
Checking out files: 82% (5292/6453)
Checking out files: 82% (5324/6453)
Checking out files: 83% (5356/6453)
Checking out files: 84% (5421/6453)
Checking out files: 85% (5486/6453)
Checking out files: 86% (5550/6453)
Checking out files: 86% (5566/6453)
Checking out files: 87% (5615/6453)
Checking out files: 88% (5679/6453)
Checking out files: 89% (5744/6453)
Checking out files: 90% (5808/6453)
Checking out files: 91% (5873/6453)
Checking out files: 92% (5937/6453)
Checking out files: 93% (6002/6453)
Checking out files: 94% (6066/6453)
Checking out files: 95% (6131/6453)
Checking out files: 96% (6195/6453)
Checking out files: 97% (6260/6453)
Checking out files: 98% (6324/6453)
Checking out files: 99% (6389/6453)
Checking out files: 100% (6453/6453)
Checking out files: 100% (6453/6453), done.
Your branch is up-to-date with 'origin/test'.
Submodule 'dtc' (git://git.qemu-project.org/dtc.git) registered for path 'dtc'
Cloning into '/var/tmp/patchew-tester-tmp-pvww0as4/src/docker-src.2018-11-05-22.26.31.3469/qemu.tar.vroot/dtc'...
Submodule path 'dtc': checked out '88f18909db731a627456f26d779445f84e449536'
Submodule 'ui/keycodemapdb' (git://git.qemu.org/keycodemapdb.git) registered for path 'ui/keycodemapdb'
Cloning into '/var/tmp/patchew-tester-tmp-pvww0as4/src/docker-src.2018-11-05-22.26.31.3469/qemu.tar.vroot/ui/keycodemapdb'...
Submodule path 'ui/keycodemapdb': checked out '6b3d716e2b6472eb7189d3220552280ef3d832ce'
COPY RUNNER
RUN test-mingw in qemu:fedora
Packages installed:
SDL2-devel-2.0.8-5.fc28.x86_64
bc-1.07.1-5.fc28.x86_64
bison-3.0.4-9.fc28.x86_64
bluez-libs-devel-5.50-1.fc28.x86_64
brlapi-devel-0.6.7-19.fc28.x86_64
bzip2-1.0.6-26.fc28.x86_64
bzip2-devel-1.0.6-26.fc28.x86_64
ccache-3.4.2-2.fc28.x86_64
clang-6.0.1-1.fc28.x86_64
device-mapper-multipath-devel-0.7.4-3.git07e7bd5.fc28.x86_64
findutils-4.6.0-19.fc28.x86_64
flex-2.6.1-7.fc28.x86_64
gcc-8.1.1-5.fc28.x86_64
gcc-c++-8.1.1-5.fc28.x86_64
gettext-0.19.8.1-14.fc28.x86_64
git-2.17.1-3.fc28.x86_64
glib2-devel-2.56.1-4.fc28.x86_64
glusterfs-api-devel-4.1.2-2.fc28.x86_64
gnutls-devel-3.6.3-3.fc28.x86_64
gtk3-devel-3.22.30-1.fc28.x86_64
hostname-3.20-3.fc28.x86_64
libaio-devel-0.3.110-11.fc28.x86_64
libasan-8.1.1-5.fc28.x86_64
libattr-devel-2.4.48-3.fc28.x86_64
libcap-devel-2.25-9.fc28.x86_64
libcap-ng-devel-0.7.9-4.fc28.x86_64
libcurl-devel-7.59.0-6.fc28.x86_64
libfdt-devel-1.4.6-5.fc28.x86_64
libpng-devel-1.6.34-6.fc28.x86_64
librbd-devel-12.2.7-1.fc28.x86_64
libssh2-devel-1.8.0-7.fc28.x86_64
libubsan-8.1.1-5.fc28.x86_64
libusbx-devel-1.0.22-1.fc28.x86_64
libxml2-devel-2.9.8-4.fc28.x86_64
llvm-6.0.1-6.fc28.x86_64
lzo-devel-2.08-12.fc28.x86_64
make-4.2.1-6.fc28.x86_64
mingw32-SDL2-2.0.5-3.fc27.noarch
mingw32-bzip2-1.0.6-9.fc27.noarch
mingw32-curl-7.57.0-1.fc28.noarch
mingw32-glib2-2.56.1-1.fc28.noarch
mingw32-gmp-6.1.2-2.fc27.noarch
mingw32-gnutls-3.6.2-1.fc28.noarch
mingw32-gtk3-3.22.30-1.fc28.noarch
mingw32-libjpeg-turbo-1.5.1-3.fc27.noarch
mingw32-libpng-1.6.29-2.fc27.noarch
mingw32-libssh2-1.8.0-3.fc27.noarch
mingw32-libtasn1-4.13-1.fc28.noarch
mingw32-nettle-3.4-1.fc28.noarch
mingw32-pixman-0.34.0-3.fc27.noarch
mingw32-pkg-config-0.28-9.fc27.x86_64
mingw64-SDL2-2.0.5-3.fc27.noarch
mingw64-bzip2-1.0.6-9.fc27.noarch
mingw64-curl-7.57.0-1.fc28.noarch
mingw64-glib2-2.56.1-1.fc28.noarch
mingw64-gmp-6.1.2-2.fc27.noarch
mingw64-gnutls-3.6.2-1.fc28.noarch
mingw64-gtk3-3.22.30-1.fc28.noarch
mingw64-libjpeg-turbo-1.5.1-3.fc27.noarch
mingw64-libpng-1.6.29-2.fc27.noarch
mingw64-libssh2-1.8.0-3.fc27.noarch
mingw64-libtasn1-4.13-1.fc28.noarch
mingw64-nettle-3.4-1.fc28.noarch
mingw64-pixman-0.34.0-3.fc27.noarch
mingw64-pkg-config-0.28-9.fc27.x86_64
ncurses-devel-6.1-5.20180224.fc28.x86_64
nettle-devel-3.4-2.fc28.x86_64
nss-devel-3.38.0-1.0.fc28.x86_64
numactl-devel-2.0.11-8.fc28.x86_64
package PyYAML is not installed
package libjpeg-devel is not installed
perl-5.26.2-413.fc28.x86_64
pixman-devel-0.34.0-8.fc28.x86_64
python3-3.6.5-1.fc28.x86_64
snappy-devel-1.1.7-5.fc28.x86_64
sparse-0.5.2-1.fc28.x86_64
spice-server-devel-0.14.0-4.fc28.x86_64
systemtap-sdt-devel-3.3-1.fc28.x86_64
tar-1.30-3.fc28.x86_64
usbredir-devel-0.8.0-1.fc28.x86_64
virglrenderer-devel-0.6.0-4.20170210git76b3da97b.fc28.x86_64
vte3-devel-0.36.5-6.fc28.x86_64
which-2.21-8.fc28.x86_64
xen-devel-4.10.1-5.fc28.x86_64
zlib-devel-1.2.11-8.fc28.x86_64
Environment variables:
TARGET_LIST=
PACKAGES=bc bison bluez-libs-devel brlapi-devel bzip2 bzip2-devel ccache clang device-mapper-multipath-devel findutils flex gcc gcc-c++ gettext git glib2-devel glusterfs-api-devel gnutls-devel gtk3-devel hostname libaio-devel libasan libattr-devel libcap-devel libcap-ng-devel libcurl-devel libfdt-devel libjpeg-devel libpng-devel librbd-devel libssh2-devel libubsan libusbx-devel libxml2-devel llvm lzo-devel make mingw32-bzip2 mingw32-curl mingw32-glib2 mingw32-gmp mingw32-gnutls mingw32-gtk3 mingw32-libjpeg-turbo mingw32-libpng mingw32-libssh2 mingw32-libtasn1 mingw32-nettle mingw32-pixman mingw32-pkg-config mingw32-SDL2 mingw64-bzip2 mingw64-curl mingw64-glib2 mingw64-gmp mingw64-gnutls mingw64-gtk3 mingw64-libjpeg-turbo mingw64-libpng mingw64-libssh2 mingw64-libtasn1 mingw64-nettle mingw64-pixman mingw64-pkg-config mingw64-SDL2 ncurses-devel nettle-devel nss-devel numactl-devel perl pixman-devel python3 PyYAML SDL2-devel snappy-devel sparse spice-server-devel systemtap-sdt-devel tar usbredir-devel virglrenderer-devel vte3-devel which xen-devel zlib-devel
J=8
V=
HOSTNAME=f67d758ab0cf
DEBUG=
SHOW_ENV=1
PWD=/
HOME=/home/patchew
CCACHE_DIR=/var/tmp/ccache
DISTTAG=f28container
QEMU_CONFIGURE_OPTS=--python=/usr/bin/python3
FGC=f28
TEST_DIR=/tmp/qemu-test
SHLVL=1
FEATURES=mingw clang pyyaml asan dtc
PATH=/usr/lib/ccache:/usr/lib64/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
MAKEFLAGS= -j8
EXTRA_CONFIGURE_OPTS=
_=/usr/bin/env
Configure options:
--enable-werror --target-list=x86_64-softmmu,aarch64-softmmu --prefix=/tmp/qemu-test/install --python=/usr/bin/python3 --cross-prefix=x86_64-w64-mingw32- --enable-trace-backends=simple --enable-gnutls --enable-nettle --enable-curl --enable-vnc --enable-bzip2 --enable-guest-agent --with-sdlabi=2.0
Install prefix /tmp/qemu-test/install
BIOS directory /tmp/qemu-test/install
firmware path /tmp/qemu-test/install/share/qemu-firmware
binary directory /tmp/qemu-test/install
library directory /tmp/qemu-test/install/lib
module directory /tmp/qemu-test/install/lib
libexec directory /tmp/qemu-test/install/libexec
include directory /tmp/qemu-test/install/include
config directory /tmp/qemu-test/install
local state directory queried at runtime
Windows SDK no
Source path /tmp/qemu-test/src
GIT binary git
GIT submodules
C compiler x86_64-w64-mingw32-gcc
Host C compiler cc
C++ compiler x86_64-w64-mingw32-g++
Objective-C compiler clang
ARFLAGS rv
CFLAGS -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -g
QEMU_CFLAGS -I/usr/x86_64-w64-mingw32/sys-root/mingw/include/pixman-1 -I$(SRC_PATH)/dtc/libfdt -Werror -DHAS_LIBSSH2_SFTP_FSYNC -I/usr/x86_64-w64-mingw32/sys-root/mingw/include -mms-bitfields -I/usr/x86_64-w64-mingw32/sys-root/mingw/include/glib-2.0 -I/usr/x86_64-w64-mingw32/sys-root/mingw/lib/glib-2.0/include -I/usr/x86_64-w64-mingw32/sys-root/mingw/include -m64 -mcx16 -mthreads -D__USE_MINGW_ANSI_STDIO=1 -DWIN32_LEAN_AND_MEAN -DWINVER=0x501 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -Wexpansion-to-defined -Wendif-labels -Wno-shift-negative-value -Wno-missing-include-dirs -Wempty-body -Wnested-externs -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wold-style-declaration -Wold-style-definition -Wtype-limits -fstack-protector-strong -I/usr/x86_64-w64-mingw32/sys-root/mingw/include -I/usr/x86_64-w64-mingw32/sys-root/mingw/include/p11-kit-1 -I/usr/x86_64-w64-mingw32/sys-root/mingw/include -I/usr/x86_64-w64-mingw32/sys-root/mingw/include/libpng16
LDFLAGS -Wl,--nxcompat -Wl,--no-seh -Wl,--dynamicbase -Wl,--warn-common -m64 -g
QEMU_LDFLAGS -L$(BUILD_DIR)/dtc/libfdt
make make
install install
python /usr/bin/python3 -B
smbd /usr/sbin/smbd
module support no
host CPU x86_64
host big endian no
target list x86_64-softmmu aarch64-softmmu
gprof enabled no
sparse enabled no
strip binaries yes
profiler no
static build no
SDL support yes (2.0.5)
GTK support yes (3.22.30)
GTK GL support no
VTE support no
TLS priority NORMAL
GNUTLS support yes
libgcrypt no
nettle yes (3.4)
libtasn1 yes
curses support no
virgl support no
curl support yes
mingw32 support yes
Audio drivers dsound
Block whitelist (rw)
Block whitelist (ro)
VirtFS support no
Multipath support no
VNC support yes
VNC SASL support no
VNC JPEG support yes
VNC PNG support yes
xen support no
brlapi support no
bluez support no
Documentation no
PIE no
vde support no
netmap support no
Linux AIO support no
ATTR/XATTR support no
Install blobs yes
KVM support no
HAX support yes
HVF support no
WHPX support no
TCG support yes
TCG debug enabled no
TCG interpreter no
malloc trim support no
RDMA support no
PVRDMA support no
fdt support git
membarrier no
preadv support no
fdatasync no
madvise no
posix_madvise no
posix_memalign no
libcap-ng support no
vhost-net support no
vhost-crypto support no
vhost-scsi support no
vhost-vsock support no
vhost-user support no
Trace backends simple
Trace output file trace-<pid>
spice support no
rbd support no
xfsctl support no
smartcard support no
libusb no
usb net redir no
OpenGL support no
OpenGL dmabufs no
libiscsi support no
libnfs support no
build guest agent yes
QGA VSS support no
QGA w32 disk info yes
QGA MSI support no
seccomp support no
coroutine backend win32
coroutine pool yes
debug stack usage no
mutex debugging no
crypto afalg no
GlusterFS support no
gcov gcov
gcov enabled no
TPM support yes
libssh2 support yes
TPM passthrough no
TPM emulator no
QOM debugging yes
Live block migration yes
lzo support no
snappy support no
bzip2 support yes
NUMA host support no
libxml2 no
tcmalloc support no
jemalloc support no
avx2 optimization yes
replication support yes
VxHS block device no
capstone no
docker no
libpmem support no
libudev no
NOTE: cross-compilers enabled: 'x86_64-w64-mingw32-gcc'
GEN x86_64-softmmu/config-devices.mak.tmp
GEN config-host.h
GEN aarch64-softmmu/config-devices.mak.tmp
GEN qemu-options.def
GEN qapi-gen
GEN trace/generated-tcg-tracers.h
GEN trace/generated-helpers-wrappers.h
GEN trace/generated-helpers.h
GEN trace/generated-helpers.c
GEN module_block.h
GEN ui/input-keymap-linux-to-qcode.c
GEN ui/input-keymap-atset1-to-qcode.c
GEN ui/input-keymap-qcode-to-atset1.c
GEN aarch64-softmmu/config-devices.mak
GEN x86_64-softmmu/config-devices.mak
GEN ui/input-keymap-qcode-to-atset2.c
GEN ui/input-keymap-qcode-to-atset3.c
GEN ui/input-keymap-qcode-to-linux.c
GEN ui/input-keymap-qcode-to-qnum.c
GEN ui/input-keymap-qnum-to-qcode.c
GEN ui/input-keymap-usb-to-qcode.c
GEN ui/input-keymap-qcode-to-sun.c
GEN ui/input-keymap-win32-to-qcode.c
GEN ui/input-keymap-x11-to-qcode.c
GEN ui/input-keymap-xorgevdev-to-qcode.c
GEN ui/input-keymap-xorgkbd-to-qcode.c
GEN ui/input-keymap-xorgxquartz-to-qcode.c
GEN ui/input-keymap-xorgxwin-to-qcode.c
GEN ui/input-keymap-osx-to-qcode.c
GEN tests/test-qapi-gen
GEN trace-root.h
GEN accel/kvm/trace.h
GEN accel/tcg/trace.h
GEN audio/trace.h
GEN block/trace.h
GEN chardev/trace.h
GEN crypto/trace.h
GEN hw/9pfs/trace.h
GEN hw/acpi/trace.h
GEN hw/alpha/trace.h
GEN hw/arm/trace.h
GEN hw/audio/trace.h
GEN hw/block/trace.h
GEN hw/block/dataplane/trace.h
GEN hw/char/trace.h
GEN hw/display/trace.h
GEN hw/dma/trace.h
GEN hw/hppa/trace.h
GEN hw/i2c/trace.h
GEN hw/i386/trace.h
GEN hw/i386/xen/trace.h
GEN hw/ide/trace.h
GEN hw/input/trace.h
GEN hw/intc/trace.h
GEN hw/isa/trace.h
GEN hw/mem/trace.h
GEN hw/misc/trace.h
GEN hw/misc/macio/trace.h
GEN hw/net/trace.h
GEN hw/nvram/trace.h
GEN hw/pci/trace.h
GEN hw/pci-host/trace.h
GEN hw/ppc/trace.h
GEN hw/rdma/trace.h
GEN hw/rdma/vmw/trace.h
GEN hw/s390x/trace.h
GEN hw/scsi/trace.h
GEN hw/sd/trace.h
GEN hw/sparc/trace.h
GEN hw/sparc64/trace.h
GEN hw/timer/trace.h
GEN hw/tpm/trace.h
GEN hw/usb/trace.h
GEN hw/vfio/trace.h
GEN hw/virtio/trace.h
GEN hw/watchdog/trace.h
GEN hw/xen/trace.h
GEN io/trace.h
GEN linux-user/trace.h
GEN migration/trace.h
GEN nbd/trace.h
GEN net/trace.h
GEN qapi/trace.h
GEN qom/trace.h
GEN scsi/trace.h
GEN target/arm/trace.h
GEN target/i386/trace.h
GEN target/mips/trace.h
GEN target/ppc/trace.h
GEN target/s390x/trace.h
GEN target/sparc/trace.h
GEN ui/trace.h
GEN util/trace.h
GEN trace-root.c
GEN accel/kvm/trace.c
GEN accel/tcg/trace.c
GEN audio/trace.c
GEN block/trace.c
GEN chardev/trace.c
GEN crypto/trace.c
GEN hw/9pfs/trace.c
GEN hw/acpi/trace.c
GEN hw/alpha/trace.c
GEN hw/arm/trace.c
GEN hw/audio/trace.c
GEN hw/block/trace.c
GEN hw/block/dataplane/trace.c
GEN hw/char/trace.c
GEN hw/display/trace.c
GEN hw/dma/trace.c
GEN hw/hppa/trace.c
GEN hw/i2c/trace.c
GEN hw/i386/trace.c
GEN hw/i386/xen/trace.c
GEN hw/ide/trace.c
GEN hw/input/trace.c
GEN hw/intc/trace.c
GEN hw/isa/trace.c
GEN hw/mem/trace.c
GEN hw/misc/trace.c
GEN hw/misc/macio/trace.c
GEN hw/net/trace.c
GEN hw/nvram/trace.c
GEN hw/pci/trace.c
GEN hw/pci-host/trace.c
GEN hw/ppc/trace.c
GEN hw/rdma/trace.c
GEN hw/rdma/vmw/trace.c
GEN hw/s390x/trace.c
GEN hw/scsi/trace.c
GEN hw/sd/trace.c
GEN hw/sparc/trace.c
GEN hw/sparc64/trace.c
GEN hw/timer/trace.c
GEN hw/tpm/trace.c
GEN hw/usb/trace.c
GEN hw/vfio/trace.c
GEN hw/virtio/trace.c
GEN hw/watchdog/trace.c
GEN hw/xen/trace.c
GEN io/trace.c
GEN linux-user/trace.c
GEN migration/trace.c
GEN nbd/trace.c
GEN net/trace.c
GEN qapi/trace.c
GEN qom/trace.c
GEN scsi/trace.c
GEN target/arm/trace.c
GEN target/i386/trace.c
GEN target/mips/trace.c
GEN target/ppc/trace.c
GEN target/s390x/trace.c
GEN target/sparc/trace.c
GEN ui/trace.c
GEN util/trace.c
GEN config-all-devices.mak
DEP /tmp/qemu-test/src/dtc/tests/dumptrees.c
DEP /tmp/qemu-test/src/dtc/tests/trees.S
DEP /tmp/qemu-test/src/dtc/tests/testutils.c
DEP /tmp/qemu-test/src/dtc/tests/value-labels.c
DEP /tmp/qemu-test/src/dtc/tests/asm_tree_dump.c
DEP /tmp/qemu-test/src/dtc/tests/truncated_memrsv.c
DEP /tmp/qemu-test/src/dtc/tests/truncated_string.c
DEP /tmp/qemu-test/src/dtc/tests/truncated_property.c
DEP /tmp/qemu-test/src/dtc/tests/check_full.c
DEP /tmp/qemu-test/src/dtc/tests/check_header.c
DEP /tmp/qemu-test/src/dtc/tests/check_path.c
DEP /tmp/qemu-test/src/dtc/tests/overlay_bad_fixup.c
DEP /tmp/qemu-test/src/dtc/tests/overlay.c
DEP /tmp/qemu-test/src/dtc/tests/subnode_iterate.c
DEP /tmp/qemu-test/src/dtc/tests/property_iterate.c
DEP /tmp/qemu-test/src/dtc/tests/integer-expressions.c
DEP /tmp/qemu-test/src/dtc/tests/path_offset_aliases.c
DEP /tmp/qemu-test/src/dtc/tests/utilfdt_test.c
DEP /tmp/qemu-test/src/dtc/tests/add_subnode_with_nops.c
DEP /tmp/qemu-test/src/dtc/tests/dtbs_equal_unordered.c
DEP /tmp/qemu-test/src/dtc/tests/dtbs_equal_ordered.c
DEP /tmp/qemu-test/src/dtc/tests/dtb_reverse.c
DEP /tmp/qemu-test/src/dtc/tests/extra-terminating-null.c
DEP /tmp/qemu-test/src/dtc/tests/incbin.c
DEP /tmp/qemu-test/src/dtc/tests/boot-cpuid.c
DEP /tmp/qemu-test/src/dtc/tests/phandle_format.c
DEP /tmp/qemu-test/src/dtc/tests/path-references.c
DEP /tmp/qemu-test/src/dtc/tests/references.c
DEP /tmp/qemu-test/src/dtc/tests/string_escapes.c
DEP /tmp/qemu-test/src/dtc/tests/propname_escapes.c
DEP /tmp/qemu-test/src/dtc/tests/appendprop2.c
DEP /tmp/qemu-test/src/dtc/tests/appendprop1.c
DEP /tmp/qemu-test/src/dtc/tests/del_node.c
DEP /tmp/qemu-test/src/dtc/tests/del_property.c
DEP /tmp/qemu-test/src/dtc/tests/setprop.c
DEP /tmp/qemu-test/src/dtc/tests/set_name.c
DEP /tmp/qemu-test/src/dtc/tests/rw_tree1.c
DEP /tmp/qemu-test/src/dtc/tests/open_pack.c
DEP /tmp/qemu-test/src/dtc/tests/nopulate.c
DEP /tmp/qemu-test/src/dtc/tests/mangle-layout.c
DEP /tmp/qemu-test/src/dtc/tests/move_and_save.c
DEP /tmp/qemu-test/src/dtc/tests/sw_states.c
DEP /tmp/qemu-test/src/dtc/tests/sw_tree1.c
DEP /tmp/qemu-test/src/dtc/tests/nop_node.c
DEP /tmp/qemu-test/src/dtc/tests/nop_property.c
DEP /tmp/qemu-test/src/dtc/tests/setprop_inplace.c
DEP /tmp/qemu-test/src/dtc/tests/addr_size_cells2.c
DEP /tmp/qemu-test/src/dtc/tests/stringlist.c
DEP /tmp/qemu-test/src/dtc/tests/addr_size_cells.c
DEP /tmp/qemu-test/src/dtc/tests/notfound.c
DEP /tmp/qemu-test/src/dtc/tests/sized_cells.c
DEP /tmp/qemu-test/src/dtc/tests/char_literal.c
DEP /tmp/qemu-test/src/dtc/tests/get_alias.c
DEP /tmp/qemu-test/src/dtc/tests/node_offset_by_compatible.c
DEP /tmp/qemu-test/src/dtc/tests/node_check_compatible.c
DEP /tmp/qemu-test/src/dtc/tests/node_offset_by_phandle.c
DEP /tmp/qemu-test/src/dtc/tests/node_offset_by_prop_value.c
DEP /tmp/qemu-test/src/dtc/tests/parent_offset.c
DEP /tmp/qemu-test/src/dtc/tests/supernode_atdepth_offset.c
DEP /tmp/qemu-test/src/dtc/tests/get_path.c
DEP /tmp/qemu-test/src/dtc/tests/get_phandle.c
DEP /tmp/qemu-test/src/dtc/tests/getprop.c
DEP /tmp/qemu-test/src/dtc/tests/get_name.c
DEP /tmp/qemu-test/src/dtc/tests/subnode_offset.c
DEP /tmp/qemu-test/src/dtc/tests/path_offset.c
DEP /tmp/qemu-test/src/dtc/tests/find_property.c
DEP /tmp/qemu-test/src/dtc/tests/root_node.c
DEP /tmp/qemu-test/src/dtc/tests/get_mem_rsv.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_overlay.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_addresses.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_empty_tree.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_strerror.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_rw.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_sw.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_wip.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_ro.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt.c
DEP /tmp/qemu-test/src/dtc/fdtoverlay.c
DEP /tmp/qemu-test/src/dtc/util.c
DEP /tmp/qemu-test/src/dtc/fdtput.c
DEP /tmp/qemu-test/src/dtc/fdtget.c
DEP /tmp/qemu-test/src/dtc/fdtdump.c
LEX convert-dtsv0-lexer.lex.c
BISON dtc-parser.tab.c
DEP /tmp/qemu-test/src/dtc/srcpos.c
LEX dtc-lexer.lex.c
DEP /tmp/qemu-test/src/dtc/livetree.c
DEP /tmp/qemu-test/src/dtc/treesource.c
DEP /tmp/qemu-test/src/dtc/fstree.c
DEP /tmp/qemu-test/src/dtc/flattree.c
DEP /tmp/qemu-test/src/dtc/dtc.c
DEP /tmp/qemu-test/src/dtc/data.c
DEP /tmp/qemu-test/src/dtc/checks.c
DEP convert-dtsv0-lexer.lex.c
DEP dtc-parser.tab.c
DEP dtc-lexer.lex.c
CHK version_gen.h
UPD version_gen.h
DEP /tmp/qemu-test/src/dtc/util.c
CC libfdt/fdt.o
CC libfdt/fdt_ro.o
CC libfdt/fdt_sw.o
CC libfdt/fdt_wip.o
CC libfdt/fdt_empty_tree.o
CC libfdt/fdt_strerror.o
CC libfdt/fdt_addresses.o
CC libfdt/fdt_rw.o
CC libfdt/fdt_overlay.o
AR libfdt/libfdt.a
x86_64-w64-mingw32-ar: creating libfdt/libfdt.a
a - libfdt/fdt.o
a - libfdt/fdt_ro.o
a - libfdt/fdt_wip.o
a - libfdt/fdt_sw.o
a - libfdt/fdt_rw.o
a - libfdt/fdt_strerror.o
a - libfdt/fdt_empty_tree.o
a - libfdt/fdt_addresses.o
a - libfdt/fdt_overlay.o
RC version.o
GEN qga/qapi-generated/qapi-gen
CC qapi/qapi-builtin-types.o
CC qapi/qapi-types.o
CC qapi/qapi-types-block-core.o
CC qapi/qapi-types-block.o
CC qapi/qapi-types-common.o
CC qapi/qapi-types-crypto.o
CC qapi/qapi-types-char.o
CC qapi/qapi-types-introspect.o
CC qapi/qapi-types-job.o
CC qapi/qapi-types-migration.o
CC qapi/qapi-types-misc.o
CC qapi/qapi-types-net.o
CC qapi/qapi-types-rocker.o
CC qapi/qapi-types-run-state.o
CC qapi/qapi-types-sockets.o
CC qapi/qapi-types-tpm.o
CC qapi/qapi-types-trace.o
CC qapi/qapi-types-ui.o
CC qapi/qapi-types-transaction.o
CC qapi/qapi-builtin-visit.o
CC qapi/qapi-visit.o
CC qapi/qapi-visit-block-core.o
CC qapi/qapi-visit-block.o
CC qapi/qapi-visit-char.o
CC qapi/qapi-visit-common.o
CC qapi/qapi-visit-crypto.o
CC qapi/qapi-visit-introspect.o
CC qapi/qapi-visit-job.o
CC qapi/qapi-visit-migration.o
CC qapi/qapi-visit-misc.o
CC qapi/qapi-visit-net.o
CC qapi/qapi-visit-rocker.o
CC qapi/qapi-visit-run-state.o
CC qapi/qapi-visit-sockets.o
CC qapi/qapi-visit-tpm.o
CC qapi/qapi-visit-trace.o
CC qapi/qapi-visit-transaction.o
CC qapi/qapi-visit-ui.o
CC qapi/qapi-events.o
CC qapi/qapi-events-block-core.o
CC qapi/qapi-events-block.o
CC qapi/qapi-events-char.o
CC qapi/qapi-events-common.o
CC qapi/qapi-events-crypto.o
CC qapi/qapi-events-job.o
CC qapi/qapi-events-introspect.o
CC qapi/qapi-events-migration.o
CC qapi/qapi-events-misc.o
CC qapi/qapi-events-net.o
CC qapi/qapi-events-rocker.o
CC qapi/qapi-events-run-state.o
CC qapi/qapi-events-sockets.o
CC qapi/qapi-events-tpm.o
CC qapi/qapi-events-trace.o
CC qapi/qapi-events-transaction.o
CC qapi/qapi-events-ui.o
CC qapi/qapi-introspect.o
CC qapi/qapi-visit-core.o
CC qapi/qapi-dealloc-visitor.o
CC qapi/qobject-input-visitor.o
CC qapi/qobject-output-visitor.o
CC qapi/qmp-registry.o
CC qapi/qmp-dispatch.o
CC qapi/string-input-visitor.o
CC qapi/string-output-visitor.o
CC qapi/opts-visitor.o
CC qapi/qapi-clone-visitor.o
CC qapi/qmp-event.o
CC qapi/qapi-util.o
CC qobject/qnull.o
CC qobject/qnum.o
CC qobject/qstring.o
CC qobject/qdict.o
CC qobject/qlist.o
CC qobject/qbool.o
CC qobject/qlit.o
CC qobject/qjson.o
CC qobject/qobject.o
CC qobject/json-lexer.o
CC qobject/json-streamer.o
CC qobject/json-parser.o
CC qobject/block-qdict.o
CC trace/simple.o
CC trace/control.o
CC trace/qmp.o
CC util/osdep.o
CC util/cutils.o
CC util/unicode.o
CC util/qemu-timer-common.o
CC util/bufferiszero.o
CC util/lockcnt.o
CC util/aiocb.o
CC util/async.o
CC util/aio-wait.o
CC util/thread-pool.o
CC util/qemu-timer.o
CC util/main-loop.o
CC util/iohandler.o
CC util/aio-win32.o
CC util/event_notifier-win32.o
CC util/oslib-win32.o
CC util/qemu-thread-win32.o
CC util/envlist.o
CC util/path.o
CC util/module.o
CC util/host-utils.o
CC util/bitmap.o
CC util/bitops.o
CC util/hbitmap.o
CC util/fifo8.o
CC util/acl.o
CC util/cacheinfo.o
CC util/error.o
CC util/qemu-error.o
CC util/id.o
CC util/iov.o
CC util/qemu-config.o
CC util/qemu-sockets.o
CC util/uri.o
CC util/notify.o
CC util/qemu-option.o
CC util/qemu-progress.o
CC util/keyval.o
CC util/hexdump.o
CC util/crc32c.o
CC util/uuid.o
CC util/throttle.o
CC util/getauxval.o
CC util/readline.o
CC util/rcu.o
CC util/qemu-coroutine.o
CC util/qemu-coroutine-lock.o
CC util/qemu-coroutine-io.o
CC util/qemu-coroutine-sleep.o
CC util/coroutine-win32.o
CC util/buffer.o
CC util/timed-average.o
CC util/base64.o
CC util/log.o
CC util/pagesize.o
CC util/qdist.o
CC util/qht.o
CC util/qsp.o
CC util/range.o
CC util/stats64.o
CC util/systemd.o
CC util/iova-tree.o
CC trace-root.o
CC accel/kvm/trace.o
CC accel/tcg/trace.o
CC audio/trace.o
CC block/trace.o
CC chardev/trace.o
CC crypto/trace.o
CC hw/9pfs/trace.o
CC hw/acpi/trace.o
CC hw/alpha/trace.o
CC hw/arm/trace.o
CC hw/block/trace.o
CC hw/audio/trace.o
CC hw/block/dataplane/trace.o
CC hw/char/trace.o
CC hw/display/trace.o
CC hw/dma/trace.o
CC hw/hppa/trace.o
CC hw/i2c/trace.o
CC hw/i386/trace.o
CC hw/i386/xen/trace.o
CC hw/ide/trace.o
CC hw/input/trace.o
CC hw/intc/trace.o
CC hw/isa/trace.o
CC hw/mem/trace.o
CC hw/misc/trace.o
CC hw/misc/macio/trace.o
CC hw/net/trace.o
CC hw/nvram/trace.o
CC hw/pci/trace.o
CC hw/pci-host/trace.o
CC hw/ppc/trace.o
CC hw/rdma/trace.o
CC hw/rdma/vmw/trace.o
CC hw/s390x/trace.o
CC hw/scsi/trace.o
CC hw/sd/trace.o
CC hw/sparc/trace.o
CC hw/sparc64/trace.o
CC hw/timer/trace.o
CC hw/tpm/trace.o
CC hw/usb/trace.o
CC hw/vfio/trace.o
CC hw/virtio/trace.o
CC hw/watchdog/trace.o
CC hw/xen/trace.o
CC io/trace.o
CC linux-user/trace.o
CC migration/trace.o
CC nbd/trace.o
CC net/trace.o
CC qapi/trace.o
CC qom/trace.o
CC scsi/trace.o
CC target/arm/trace.o
CC target/i386/trace.o
CC target/mips/trace.o
CC target/ppc/trace.o
CC target/s390x/trace.o
CC target/sparc/trace.o
CC ui/trace.o
CC util/trace.o
CC crypto/pbkdf-stub.o
CC stubs/arch-query-cpu-def.o
CC stubs/arch-query-cpu-model-expansion.o
CC stubs/arch-query-cpu-model-comparison.o
CC stubs/arch-query-cpu-model-baseline.o
CC stubs/bdrv-next-monitor-owned.o
CC stubs/blk-commit-all.o
CC stubs/blockdev-close-all-bdrv-states.o
CC stubs/clock-warp.o
CC stubs/cpu-get-clock.o
CC stubs/cpu-get-icount.o
CC stubs/dump.o
CC stubs/error-printf.o
CC stubs/fdset.o
CC stubs/gdbstub.o
CC stubs/get-vm-name.o
CC stubs/iothread.o
CC stubs/iothread-lock.o
CC stubs/is-daemonized.o
CC stubs/migr-blocker.o
CC stubs/machine-init-done.o
CC stubs/change-state-handler.o
CC stubs/monitor.o
CC stubs/notify-event.o
CC stubs/qtest.o
CC stubs/replay.o
CC stubs/runstate-check.o
CC stubs/set-fd-handler.o
CC stubs/slirp.o
CC stubs/sysbus.o
CC stubs/tpm.o
CC stubs/trace-control.o
CC stubs/uuid.o
CC stubs/vm-stop.o
CC stubs/vmstate.o
CC stubs/fd-register.o
CC stubs/qmp_memory_device.o
CC stubs/target-monitor-defs.o
CC stubs/target-get-monitor-def.o
CC stubs/pc_madt_cpu_entry.o
CC stubs/vmgenid.o
CC stubs/xen-common.o
CC stubs/xen-hvm.o
CC stubs/pci-host-piix.o
CC stubs/ram-block.o
CC stubs/ramfb.o
GEN qemu-img-cmds.h
CC block.o
CC blockjob.o
CC job.o
CC qemu-io-cmds.o
CC replication.o
CC block/raw-format.o
CC block/qcow.o
CC block/vdi.o
CC block/vmdk.o
CC block/cloop.o
CC block/bochs.o
CC block/vpc.o
CC block/vvfat.o
CC block/qcow2.o
CC block/dmg.o
CC block/qcow2-refcount.o
CC block/qcow2-cluster.o
CC block/qcow2-snapshot.o
CC block/qcow2-cache.o
CC block/qcow2-bitmap.o
CC block/qed.o
CC block/qed-l2-cache.o
CC block/qed-table.o
CC block/qed-cluster.o
CC block/qed-check.o
CC block/vhdx.o
CC block/vhdx-endian.o
CC block/vhdx-log.o
CC block/quorum.o
CC block/parallels.o
CC block/blkdebug.o
CC block/blkverify.o
CC block/blkreplay.o
CC block/blklogwrites.o
CC block/block-backend.o
CC block/snapshot.o
CC block/qapi.o
CC block/file-win32.o
CC block/win32-aio.o
CC block/null.o
CC block/mirror.o
CC block/commit.o
CC block/io.o
CC block/create.o
CC block/throttle-groups.o
CC block/nbd.o
CC block/nbd-client.o
CC block/sheepdog.o
CC block/accounting.o
CC block/dirty-bitmap.o
CC block/write-threshold.o
CC block/backup.o
CC block/replication.o
CC block/throttle.o
CC block/copy-on-read.o
CC block/crypto.o
CC nbd/server.o
CC nbd/client.o
CC nbd/common.o
CC scsi/utils.o
CC scsi/pr-manager-stub.o
CC block/curl.o
CC block/ssh.o
CC block/dmg-bz2.o
CC crypto/init.o
CC crypto/hash.o
CC crypto/hash-nettle.o
CC crypto/hmac.o
CC crypto/hmac-nettle.o
CC crypto/aes.o
CC crypto/desrfb.o
CC crypto/cipher.o
CC crypto/tlscreds.o
CC crypto/tlscredsanon.o
CC crypto/tlscredspsk.o
CC crypto/tlscredsx509.o
CC crypto/tlssession.o
CC crypto/secret.o
CC crypto/random-gnutls.o
CC crypto/pbkdf.o
CC crypto/pbkdf-nettle.o
CC crypto/ivgen.o
CC crypto/ivgen-essiv.o
CC crypto/ivgen-plain.o
CC crypto/ivgen-plain64.o
CC crypto/afsplit.o
CC crypto/xts.o
CC crypto/block.o
CC crypto/block-qcow.o
CC crypto/block-luks.o
CC io/channel.o
CC io/channel-buffer.o
CC io/channel-command.o
CC io/channel-file.o
CC io/channel-socket.o
CC io/channel-tls.o
CC io/channel-watch.o
CC io/channel-websock.o
CC io/channel-util.o
CC io/dns-resolver.o
CC io/net-listener.o
CC io/task.o
CC qom/object.o
CC qom/container.o
CC qom/qom-qobject.o
CC qom/object_interfaces.o
CC qemu-io.o
CC qemu-edid.o
CC hw/display/edid-generate.o
CC blockdev.o
CC blockdev-nbd.o
CC bootdevice.o
CC iothread.o
CC job-qmp.o
CC qdev-monitor.o
CC device-hotplug.o
CC os-win32.o
CC bt-host.o
CC bt-vhci.o
CC dma-helpers.o
CC vl.o
CC tpm.o
CC device_tree.o
CC qapi/qapi-commands.o
CC qapi/qapi-commands-block-core.o
CC qapi/qapi-commands-block.o
CC qapi/qapi-commands-char.o
CC qapi/qapi-commands-common.o
CC qapi/qapi-commands-crypto.o
CC qapi/qapi-commands-introspect.o
CC qapi/qapi-commands-job.o
CC qapi/qapi-commands-migration.o
CC qapi/qapi-commands-misc.o
CC qapi/qapi-commands-net.o
CC qapi/qapi-commands-rocker.o
CC qapi/qapi-commands-run-state.o
CC qapi/qapi-commands-sockets.o
CC qapi/qapi-commands-tpm.o
CC qapi/qapi-commands-trace.o
CC qapi/qapi-commands-transaction.o
CC qapi/qapi-commands-ui.o
CC qmp.o
CC hmp.o
CC cpus-common.o
CC audio/audio.o
CC audio/wavaudio.o
CC audio/noaudio.o
CC audio/mixeng.o
CC audio/dsoundaudio.o
CC audio/audio_win_int.o
CC audio/wavcapture.o
CC backends/rng.o
CC backends/rng-egd.o
CC backends/tpm.o
CC backends/hostmem.o
CC backends/hostmem-ram.o
CC backends/cryptodev.o
CC backends/cryptodev-builtin.o
CC backends/cryptodev-vhost.o
CC block/stream.o
CC chardev/msmouse.o
CC chardev/wctablet.o
CC chardev/testdev.o
CC disas/arm.o
CXX disas/arm-a64.o
CC disas/i386.o
CXX disas/libvixl/vixl/utils.o
CXX disas/libvixl/vixl/compiler-intrinsics.o
CXX disas/libvixl/vixl/a64/instructions-a64.o
CXX disas/libvixl/vixl/a64/decoder-a64.o
CXX disas/libvixl/vixl/a64/disasm-a64.o
CC hw/acpi/core.o
CC hw/acpi/piix4.o
CC hw/acpi/pcihp.o
CC hw/acpi/ich9.o
CC hw/acpi/tco.o
CC hw/acpi/cpu_hotplug.o
CC hw/acpi/memory_hotplug.o
CC hw/acpi/cpu.o
CC hw/acpi/nvdimm.o
CC hw/acpi/vmgenid.o
CC hw/acpi/acpi_interface.o
CC hw/acpi/bios-linker-loader.o
CC hw/acpi/aml-build.o
CC hw/acpi/ipmi.o
CC hw/acpi/acpi-stub.o
CC hw/acpi/ipmi-stub.o
CC hw/audio/sb16.o
CC hw/audio/es1370.o
CC hw/audio/ac97.o
CC hw/audio/fmopl.o
CC hw/audio/adlib.o
CC hw/audio/gus.o
CC hw/audio/gusemu_hal.o
CC hw/audio/gusemu_mixer.o
CC hw/audio/cs4231a.o
CC hw/audio/intel-hda.o
CC hw/audio/hda-codec.o
CC hw/audio/pcspk.o
CC hw/audio/wm8750.o
CC hw/audio/pl041.o
CC hw/audio/lm4549.o
CC hw/audio/marvell_88w8618.o
CC hw/audio/soundhw.o
CC hw/block/block.o
CC hw/block/cdrom.o
CC hw/block/hd-geometry.o
CC hw/block/fdc.o
CC hw/block/m25p80.o
CC hw/block/nand.o
CC hw/block/pflash_cfi01.o
CC hw/block/pflash_cfi02.o
CC hw/block/ecc.o
CC hw/block/onenand.o
CC hw/block/nvme.o
CC hw/bt/core.o
CC hw/bt/l2cap.o
CC hw/bt/sdp.o
CC hw/bt/hci.o
CC hw/bt/hid.o
CC hw/bt/hci-csr.o
CC hw/char/ipoctal232.o
CC hw/char/nrf51_uart.o
CC hw/char/parallel.o
CC hw/char/parallel-isa.o
CC hw/char/pl011.o
CC hw/char/serial.o
CC hw/char/serial-isa.o
CC hw/char/serial-pci.o
CC hw/char/virtio-console.o
CC hw/char/cadence_uart.o
CC hw/char/cmsdk-apb-uart.o
CC hw/char/debugcon.o
CC hw/char/imx_serial.o
CC hw/core/qdev.o
CC hw/core/qdev-properties.o
CC hw/core/bus.o
CC hw/core/reset.o
CC hw/core/qdev-fw.o
CC hw/core/fw-path-provider.o
CC hw/core/irq.o
CC hw/core/hotplug.o
CC hw/core/nmi.o
CC hw/core/stream.o
CC hw/core/ptimer.o
CC hw/core/machine.o
CC hw/core/sysbus.o
CC hw/core/loader.o
CC hw/core/qdev-properties-system.o
CC hw/core/register.o
CC hw/core/or-irq.o
CC hw/core/split-irq.o
CC hw/core/platform-bus.o
CC hw/core/generic-loader.o
CC hw/core/null-machine.o
CC hw/cpu/core.o
CC hw/display/ramfb.o
CC hw/display/ramfb-standalone.o
CC hw/display/ads7846.o
CC hw/display/cirrus_vga.o
CC hw/display/cirrus_vga_isa.o
CC hw/display/pl110.o
CC hw/display/sii9022.o
CC hw/display/ssd0303.o
CC hw/display/ssd0323.o
CC hw/display/vga-pci.o
CC hw/display/edid-region.o
CC hw/display/vga-isa.o
CC hw/display/vmware_vga.o
CC hw/display/bochs-display.o
CC hw/display/blizzard.o
CC hw/display/exynos4210_fimd.o
CC hw/display/framebuffer.o
CC hw/display/tc6393xb.o
CC hw/dma/pl080.o
CC hw/dma/pl330.o
CC hw/dma/i8257.o
CC hw/dma/xilinx_axidma.o
CC hw/dma/xlnx-zynq-devcfg.o
CC hw/dma/xlnx-zdma.o
CC hw/gpio/max7310.o
CC hw/gpio/pl061.o
CC hw/gpio/zaurus.o
CC hw/gpio/gpio_key.o
CC hw/i2c/core.o
CC hw/i2c/smbus.o
CC hw/i2c/smbus_eeprom.o
CC hw/i2c/i2c-ddc.o
CC hw/i2c/versatile_i2c.o
CC hw/i2c/smbus_ich9.o
CC hw/i2c/pm_smbus.o
CC hw/i2c/bitbang_i2c.o
CC hw/i2c/exynos4210_i2c.o
CC hw/i2c/imx_i2c.o
CC hw/i2c/aspeed_i2c.o
CC hw/ide/core.o
CC hw/ide/atapi.o
CC hw/ide/qdev.o
CC hw/ide/pci.o
CC hw/ide/isa.o
CC hw/ide/piix.o
CC hw/ide/microdrive.o
CC hw/ide/ahci.o
CC hw/ide/ich.o
CC hw/ide/ahci-allwinner.o
CC hw/input/hid.o
CC hw/input/lm832x.o
CC hw/input/pckbd.o
CC hw/input/pl050.o
CC hw/input/ps2.o
CC hw/input/stellaris_input.o
CC hw/input/tsc2005.o
CC hw/input/virtio-input.o
CC hw/input/virtio-input-hid.o
CC hw/intc/i8259_common.o
CC hw/intc/i8259.o
CC hw/intc/pl190.o
CC hw/intc/xlnx-pmu-iomod-intc.o
CC hw/intc/xlnx-zynqmp-ipi.o
CC hw/intc/imx_avic.o
CC hw/intc/imx_gpcv2.o
CC hw/intc/realview_gic.o
CC hw/intc/ioapic_common.o
CC hw/intc/arm_gic_common.o
CC hw/intc/arm_gic.o
CC hw/intc/arm_gicv2m.o
CC hw/intc/arm_gicv3_common.o
CC hw/intc/arm_gicv3.o
CC hw/intc/arm_gicv3_dist.o
CC hw/intc/arm_gicv3_redist.o
CC hw/intc/arm_gicv3_its_common.o
CC hw/intc/intc.o
CC hw/ipack/ipack.o
CC hw/ipack/tpci200.o
CC hw/ipmi/ipmi.o
CC hw/ipmi/ipmi_bmc_sim.o
CC hw/ipmi/ipmi_bmc_extern.o
CC hw/ipmi/isa_ipmi_kcs.o
CC hw/ipmi/isa_ipmi_bt.o
CC hw/isa/isa-bus.o
CC hw/isa/isa-superio.o
CC hw/isa/apm.o
CC hw/mem/pc-dimm.o
CC hw/mem/memory-device.o
CC hw/mem/nvdimm.o
CC hw/misc/applesmc.o
CC hw/misc/max111x.o
CC hw/misc/tmp105.o
CC hw/misc/tmp421.o
CC hw/misc/debugexit.o
CC hw/misc/sga.o
CC hw/misc/pc-testdev.o
CC hw/misc/pci-testdev.o
CC hw/misc/edu.o
CC hw/misc/pca9552.o
CC hw/misc/unimp.o
CC hw/misc/vmcoreinfo.o
CC hw/misc/arm_l2x0.o
CC hw/misc/a9scu.o
CC hw/misc/arm_integrator_debug.o
CC hw/misc/arm11scu.o
CC hw/net/ne2000.o
CC hw/net/eepro100.o
CC hw/net/pcnet-pci.o
CC hw/net/pcnet.o
CC hw/net/e1000.o
CC hw/net/e1000x_common.o
CC hw/net/net_tx_pkt.o
CC hw/net/net_rx_pkt.o
CC hw/net/e1000e.o
CC hw/net/e1000e_core.o
CC hw/net/rtl8139.o
CC hw/net/vmxnet3.o
CC hw/net/smc91c111.o
CC hw/net/lan9118.o
CC hw/net/ne2000-isa.o
CC hw/net/xgmac.o
CC hw/net/xilinx_axienet.o
CC hw/net/allwinner_emac.o
CC hw/net/imx_fec.o
CC hw/net/cadence_gem.o
CC hw/net/stellaris_enet.o
CC hw/net/ftgmac100.o
CC hw/net/rocker/rocker.o
CC hw/net/rocker/rocker_fp.o
CC hw/net/rocker/rocker_desc.o
CC hw/net/rocker/rocker_world.o
CC hw/net/rocker/rocker_of_dpa.o
CC hw/net/can/can_sja1000.o
CC hw/net/can/can_kvaser_pci.o
CC hw/net/can/can_pcm3680_pci.o
CC hw/net/can/can_mioe3680_pci.o
CC hw/nvram/eeprom93xx.o
CC hw/nvram/fw_cfg.o
CC hw/nvram/chrp_nvram.o
CC hw/pci-bridge/pci_bridge_dev.o
CC hw/pci-bridge/pcie_root_port.o
CC hw/pci-bridge/gen_pcie_root_port.o
CC hw/pci-bridge/pcie_pci_bridge.o
CC hw/pci-bridge/pci_expander_bridge.o
CC hw/pci-bridge/xio3130_upstream.o
CC hw/pci-bridge/xio3130_downstream.o
CC hw/pci-bridge/ioh3420.o
CC hw/pci-bridge/i82801b11.o
CC hw/pci-host/pam.o
CC hw/pci-host/versatile.o
CC hw/pci-host/piix.o
CC hw/pci-host/q35.o
CC hw/pci-host/gpex.o
CC hw/pci-host/designware.o
CC hw/pci/pci.o
CC hw/pci/pci_bridge.o
CC hw/pci/msix.o
CC hw/pci/msi.o
CC hw/pci/shpc.o
CC hw/pci/slotid_cap.o
CC hw/pci/pci_host.o
CC hw/pci/pcie_host.o
CC hw/pci/pcie.o
CC hw/pci/pcie_aer.o
CC hw/pci/pcie_port.o
CC hw/pci/pci-stub.o
CC hw/pcmcia/pcmcia.o
CC hw/scsi/scsi-disk.o
CC hw/scsi/scsi-generic.o
CC hw/scsi/scsi-bus.o
CC hw/scsi/lsi53c895a.o
CC hw/scsi/mptsas.o
CC hw/scsi/mptconfig.o
CC hw/scsi/mptendian.o
CC hw/scsi/megasas.o
CC hw/scsi/vmw_pvscsi.o
CC hw/scsi/esp.o
CC hw/scsi/esp-pci.o
CC hw/sd/pl181.o
CC hw/sd/ssi-sd.o
CC hw/sd/sd.o
CC hw/sd/core.o
CC hw/sd/sdmmc-internal.o
CC hw/sd/sdhci.o
CC hw/smbios/smbios.o
CC hw/smbios/smbios_type_38.o
CC hw/smbios/smbios-stub.o
CC hw/smbios/smbios_type_38-stub.o
CC hw/ssi/pl022.o
CC hw/ssi/ssi.o
CC hw/ssi/xilinx_spips.o
CC hw/ssi/aspeed_smc.o
CC hw/ssi/stm32f2xx_spi.o
CC hw/ssi/mss-spi.o
CC hw/timer/arm_timer.o
CC hw/timer/arm_mptimer.o
CC hw/timer/armv7m_systick.o
CC hw/timer/a9gtimer.o
CC hw/timer/cadence_ttc.o
CC hw/timer/ds1338.o
CC hw/timer/hpet.o
CC hw/timer/i8254_common.o
CC hw/timer/i8254.o
CC hw/timer/pl031.o
CC hw/timer/twl92230.o
CC hw/timer/imx_epit.o
CC hw/timer/imx_gpt.o
CC hw/timer/xlnx-zynqmp-rtc.o
CC hw/timer/stm32f2xx_timer.o
CC hw/timer/aspeed_timer.o
CC hw/timer/cmsdk-apb-timer.o
CC hw/timer/cmsdk-apb-dualtimer.o
CC hw/timer/mss-timer.o
CC hw/tpm/tpm_util.o
CC hw/tpm/tpm_tis.o
CC hw/tpm/tpm_crb.o
CC hw/usb/core.o
CC hw/usb/combined-packet.o
CC hw/usb/bus.o
CC hw/usb/libhw.o
CC hw/usb/desc.o
CC hw/usb/desc-msos.o
CC hw/usb/hcd-uhci.o
CC hw/usb/hcd-ohci.o
CC hw/usb/hcd-ehci.o
CC hw/usb/hcd-ehci-pci.o
CC hw/usb/hcd-ehci-sysbus.o
CC hw/usb/hcd-xhci.o
CC hw/usb/hcd-xhci-nec.o
CC hw/usb/hcd-musb.o
CC hw/usb/dev-hub.o
CC hw/usb/dev-hid.o
CC hw/usb/dev-wacom.o
CC hw/usb/dev-storage.o
CC hw/usb/dev-uas.o
CC hw/usb/dev-audio.o
CC hw/usb/dev-serial.o
CC hw/usb/dev-network.o
CC hw/usb/dev-bluetooth.o
CC hw/usb/dev-smartcard-reader.o
CC hw/usb/host-stub.o
CC hw/virtio/virtio-bus.o
CC hw/virtio/virtio-rng.o
CC hw/virtio/virtio-pci.o
CC hw/virtio/virtio-mmio.o
CC hw/virtio/vhost-stub.o
CC hw/watchdog/watchdog.o
CC hw/watchdog/cmsdk-apb-watchdog.o
CC hw/watchdog/wdt_i6300esb.o
CC hw/watchdog/wdt_ib700.o
CC hw/watchdog/wdt_aspeed.o
CC migration/migration.o
CC migration/socket.o
CC migration/fd.o
CC migration/exec.o
CC migration/tls.o
CC migration/channel.o
CC migration/savevm.o
CC migration/colo.o
CC migration/colo-failover.o
CC migration/vmstate.o
CC migration/vmstate-types.o
CC migration/page_cache.o
CC migration/qemu-file.o
CC migration/global_state.o
CC migration/qemu-file-channel.o
CC migration/xbzrle.o
CC migration/postcopy-ram.o
CC migration/qjson.o
CC migration/block-dirty-bitmap.o
CC migration/block.o
CC net/net.o
CC net/queue.o
CC net/checksum.o
CC net/util.o
CC net/hub.o
CC net/socket.o
CC net/dump.o
CC net/eth.o
CC net/slirp.o
CC net/filter.o
CC net/filter-buffer.o
CC net/filter-mirror.o
CC net/colo-compare.o
CC net/colo.o
CC net/filter-rewriter.o
CC net/filter-replay.o
CC net/tap-win32.o
CC net/can/can_core.o
CC net/can/can_host.o
CC qom/cpu.o
CC replay/replay.o
CC replay/replay-internal.o
CC replay/replay-events.o
CC replay/replay-time.o
CC replay/replay-input.o
CC replay/replay-char.o
CC replay/replay-snapshot.o
CC replay/replay-net.o
CC replay/replay-audio.o
CC slirp/cksum.o
CC slirp/if.o
CC slirp/ip_icmp.o
CC slirp/ip6_icmp.o
CC slirp/ip6_input.o
CC slirp/ip6_output.o
CC slirp/ip_input.o
CC slirp/ip_output.o
CC slirp/dnssearch.o
CC slirp/dhcpv6.o
CC slirp/slirp.o
CC slirp/mbuf.o
CC slirp/misc.o
CC slirp/sbuf.o
CC slirp/socket.o
CC slirp/tcp_input.o
CC slirp/tcp_output.o
CC slirp/tcp_subr.o
CC slirp/tcp_timer.o
CC slirp/udp.o
CC slirp/udp6.o
CC slirp/bootp.o
CC slirp/tftp.o
CC slirp/arp_table.o
CC slirp/ndp_table.o
CC slirp/ncsi.o
CC ui/keymaps.o
CC ui/console.o
CC ui/cursor.o
CC ui/qemu-pixman.o
CC ui/input.o
CC ui/input-keymap.o
CC ui/input-legacy.o
CC ui/vnc.o
CC ui/vnc-enc-zlib.o
CC ui/vnc-enc-hextile.o
CC ui/vnc-enc-tight.o
CC ui/vnc-palette.o
CC ui/vnc-enc-zrle.o
CC ui/vnc-auth-vencrypt.o
CC ui/vnc-ws.o
CC ui/vnc-jobs.o
CC ui/sdl2.o
CC ui/sdl2-input.o
CC ui/sdl2-2d.o
CC ui/gtk.o
CC chardev/char.o
CC chardev/char-console.o
CC chardev/char-fe.o
CC chardev/char-file.o
CC chardev/char-io.o
CC chardev/char-mux.o
CC chardev/char-null.o
CC chardev/char-pipe.o
CC chardev/char-ringbuf.o
CC chardev/char-serial.o
CC chardev/char-socket.o
CC chardev/char-stdio.o
CC chardev/char-udp.o
CC chardev/char-win.o
CC chardev/char-win-stdio.o
CC qga/commands.o
CC qga/guest-agent-command-state.o
CC qga/main.o
CC qga/commands-win32.o
CC qga/channel-win32.o
CC qga/service-win32.o
CC qga/vss-win32.o
CC qga/qapi-generated/qga-qapi-types.o
CC qga/qapi-generated/qga-qapi-visit.o
CC qga/qapi-generated/qga-qapi-commands.o
AR libqemuutil.a
CC qemu-img.o
AS optionrom/multiboot.o
AS optionrom/linuxboot.o
CC optionrom/linuxboot_dma.o
AS optionrom/kvmvapic.o
BUILD optionrom/linuxboot.img
BUILD optionrom/multiboot.img
BUILD optionrom/linuxboot_dma.img
BUILD optionrom/kvmvapic.img
BUILD optionrom/linuxboot.raw
BUILD optionrom/multiboot.raw
BUILD optionrom/linuxboot_dma.raw
BUILD optionrom/kvmvapic.raw
SIGN optionrom/multiboot.bin
SIGN optionrom/linuxboot.bin
SIGN optionrom/linuxboot_dma.bin
SIGN optionrom/kvmvapic.bin
LINK qemu-io.exe
LINK qemu-edid.exe
LINK qemu-ga.exe
LINK qemu-img.exe
GEN aarch64-softmmu/hmp-commands.h
GEN aarch64-softmmu/hmp-commands-info.h
GEN aarch64-softmmu/config-target.h
GEN x86_64-softmmu/hmp-commands-info.h
GEN x86_64-softmmu/hmp-commands.h
GEN x86_64-softmmu/config-target.h
CC aarch64-softmmu/tcg/tcg.o
CC aarch64-softmmu/tcg/tcg-op.o
CC aarch64-softmmu/exec.o
CC aarch64-softmmu/tcg/tcg-op-vec.o
CC aarch64-softmmu/tcg/tcg-common.o
CC aarch64-softmmu/tcg/tcg-op-gvec.o
CC aarch64-softmmu/tcg/optimize.o
CC x86_64-softmmu/exec.o
CC aarch64-softmmu/fpu/softfloat.o
CC aarch64-softmmu/disas.o
GEN aarch64-softmmu/gdbstub-xml.c
CC aarch64-softmmu/arch_init.o
CC aarch64-softmmu/cpus.o
CC aarch64-softmmu/monitor.o
CC aarch64-softmmu/gdbstub.o
CC aarch64-softmmu/balloon.o
CC x86_64-softmmu/tcg/tcg.o
CC aarch64-softmmu/ioport.o
CC aarch64-softmmu/qtest.o
CC x86_64-softmmu/tcg/tcg-op.o
CC aarch64-softmmu/memory.o
CC x86_64-softmmu/tcg/tcg-op-vec.o
CC aarch64-softmmu/numa.o
CC aarch64-softmmu/memory_mapping.o
CC aarch64-softmmu/dump.o
CC aarch64-softmmu/migration/ram.o
CC aarch64-softmmu/accel/accel.o
CC x86_64-softmmu/tcg/tcg-op-gvec.o
CC aarch64-softmmu/accel/stubs/hax-stub.o
CC aarch64-softmmu/accel/stubs/hvf-stub.o
CC aarch64-softmmu/accel/stubs/whpx-stub.o
CC aarch64-softmmu/accel/stubs/kvm-stub.o
CC aarch64-softmmu/accel/tcg/tcg-all.o
CC aarch64-softmmu/accel/tcg/cputlb.o
CC x86_64-softmmu/tcg/tcg-common.o
CC aarch64-softmmu/accel/tcg/tcg-runtime.o
CC aarch64-softmmu/accel/tcg/tcg-runtime-gvec.o
CC aarch64-softmmu/accel/tcg/cpu-exec.o
CC aarch64-softmmu/accel/tcg/cpu-exec-common.o
CC aarch64-softmmu/accel/tcg/translate-all.o
CC aarch64-softmmu/accel/tcg/translator.o
CC aarch64-softmmu/hw/adc/stm32f2xx_adc.o
CC aarch64-softmmu/hw/block/virtio-blk.o
CC aarch64-softmmu/hw/block/dataplane/virtio-blk.o
CC aarch64-softmmu/hw/char/exynos4210_uart.o
CC aarch64-softmmu/hw/char/omap_uart.o
CC aarch64-softmmu/hw/char/digic-uart.o
CC aarch64-softmmu/hw/char/stm32f2xx_usart.o
CC aarch64-softmmu/hw/char/bcm2835_aux.o
CC x86_64-softmmu/tcg/optimize.o
CC aarch64-softmmu/hw/char/virtio-serial-bus.o
CC x86_64-softmmu/fpu/softfloat.o
CC aarch64-softmmu/hw/cpu/arm11mpcore.o
CC aarch64-softmmu/hw/cpu/realview_mpcore.o
CC x86_64-softmmu/disas.o
GEN x86_64-softmmu/gdbstub-xml.c
CC x86_64-softmmu/arch_init.o
CC x86_64-softmmu/cpus.o
CC x86_64-softmmu/monitor.o
CC aarch64-softmmu/hw/cpu/a9mpcore.o
CC x86_64-softmmu/gdbstub.o
CC aarch64-softmmu/hw/cpu/a15mpcore.o
CC x86_64-softmmu/balloon.o
CC aarch64-softmmu/hw/display/omap_dss.o
CC aarch64-softmmu/hw/display/omap_lcdc.o
CC aarch64-softmmu/hw/display/pxa2xx_lcd.o
CC aarch64-softmmu/hw/display/bcm2835_fb.o
CC x86_64-softmmu/ioport.o
CC x86_64-softmmu/numa.o
CC aarch64-softmmu/hw/display/vga.o
CC x86_64-softmmu/qtest.o
CC x86_64-softmmu/memory.o
CC x86_64-softmmu/memory_mapping.o
CC x86_64-softmmu/dump.o
CC x86_64-softmmu/win_dump.o
CC x86_64-softmmu/migration/ram.o
CC x86_64-softmmu/accel/accel.o
CC x86_64-softmmu/accel/stubs/hvf-stub.o
CC x86_64-softmmu/accel/stubs/whpx-stub.o
CC x86_64-softmmu/accel/stubs/kvm-stub.o
CC aarch64-softmmu/hw/display/virtio-gpu.o
CC aarch64-softmmu/hw/display/virtio-gpu-3d.o
CC aarch64-softmmu/hw/display/virtio-gpu-pci.o
CC x86_64-softmmu/accel/tcg/tcg-all.o
CC x86_64-softmmu/accel/tcg/cputlb.o
CC aarch64-softmmu/hw/display/dpcd.o
CC x86_64-softmmu/accel/tcg/tcg-runtime.o
CC aarch64-softmmu/hw/display/xlnx_dp.o
CC x86_64-softmmu/accel/tcg/tcg-runtime-gvec.o
CC aarch64-softmmu/hw/dma/xlnx_dpdma.o
CC aarch64-softmmu/hw/dma/omap_dma.o
CC aarch64-softmmu/hw/dma/soc_dma.o
CC x86_64-softmmu/accel/tcg/cpu-exec.o
CC x86_64-softmmu/accel/tcg/cpu-exec-common.o
CC x86_64-softmmu/accel/tcg/translate-all.o
CC aarch64-softmmu/hw/dma/pxa2xx_dma.o
CC aarch64-softmmu/hw/dma/bcm2835_dma.o
CC aarch64-softmmu/hw/gpio/omap_gpio.o
CC x86_64-softmmu/accel/tcg/translator.o
CC x86_64-softmmu/hw/block/virtio-blk.o
CC x86_64-softmmu/hw/block/dataplane/virtio-blk.o
CC aarch64-softmmu/hw/gpio/imx_gpio.o
CC aarch64-softmmu/hw/gpio/bcm2835_gpio.o
CC x86_64-softmmu/hw/char/virtio-serial-bus.o
CC aarch64-softmmu/hw/i2c/omap_i2c.o
CC aarch64-softmmu/hw/input/pxa2xx_keypad.o
CC aarch64-softmmu/hw/input/tsc210x.o
CC aarch64-softmmu/hw/intc/armv7m_nvic.o
CC aarch64-softmmu/hw/intc/exynos4210_gic.o
CC x86_64-softmmu/hw/display/vga.o
CC aarch64-softmmu/hw/intc/exynos4210_combiner.o
CC x86_64-softmmu/hw/display/virtio-gpu.o
CC aarch64-softmmu/hw/intc/omap_intc.o
CC x86_64-softmmu/hw/display/virtio-gpu-3d.o
CC aarch64-softmmu/hw/intc/bcm2835_ic.o
CC aarch64-softmmu/hw/intc/bcm2836_control.o
CC aarch64-softmmu/hw/intc/allwinner-a10-pic.o
CC aarch64-softmmu/hw/intc/aspeed_vic.o
CC aarch64-softmmu/hw/intc/arm_gicv3_cpuif.o
CC x86_64-softmmu/hw/display/virtio-gpu-pci.o
CC aarch64-softmmu/hw/misc/arm_sysctl.o
CC x86_64-softmmu/hw/display/virtio-vga.o
CC aarch64-softmmu/hw/misc/cbus.o
CC aarch64-softmmu/hw/misc/exynos4210_pmu.o
CC x86_64-softmmu/hw/intc/apic.o
CC aarch64-softmmu/hw/misc/exynos4210_clk.o
CC aarch64-softmmu/hw/misc/exynos4210_rng.o
CC aarch64-softmmu/hw/misc/imx_ccm.o
CC aarch64-softmmu/hw/misc/imx31_ccm.o
In file included from /tmp/qemu-test/src/hw/char/bcm2835_aux.c:25:0:
/tmp/qemu-test/src/hw/char/bcm2835_aux.c: In function 'bcm2835_aux_write':
/tmp/qemu-test/src/hw/char/bcm2835_aux.c:161:38: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'uint64_t {aka long long unsigned int}' [-Werror=format=]
qemu_log_mask(LOG_UNIMP, "%s: unsupported attempt to enable SPI "
^
/tmp/qemu-test/src/include/qemu/log.h:85:22: note: in definition of macro 'qemu_log_mask'
qemu_log(FMT, ## __VA_ARGS__); \
^~~
/tmp/qemu-test/src/hw/char/bcm2835_aux.c:162:49: note: format string is defined here
"or disable UART: 0x%lx\n", __func__, value);
~~^
%llx
cc1: all warnings being treated as errors
make[1]: *** [/tmp/qemu-test/src/rules.mak:69: hw/char/bcm2835_aux.o] Error 1
make[1]: *** Waiting for unfinished jobs....
CC x86_64-softmmu/hw/intc/apic_common.o
CC x86_64-softmmu/hw/intc/ioapic.o
CC x86_64-softmmu/hw/isa/lpc_ich9.o
CC x86_64-softmmu/hw/misc/pvpanic.o
CC x86_64-softmmu/hw/net/virtio-net.o
CC x86_64-softmmu/hw/net/vhost_net.o
CC x86_64-softmmu/hw/scsi/virtio-scsi.o
CC x86_64-softmmu/hw/scsi/virtio-scsi-dataplane.o
CC x86_64-softmmu/hw/timer/mc146818rtc.o
CC x86_64-softmmu/hw/virtio/virtio.o
CC x86_64-softmmu/hw/virtio/virtio-balloon.o
CC x86_64-softmmu/hw/virtio/virtio-crypto.o
CC x86_64-softmmu/hw/virtio/virtio-crypto-pci.o
CC x86_64-softmmu/hw/i386/multiboot.o
CC x86_64-softmmu/hw/i386/pc.o
CC x86_64-softmmu/hw/i386/pc_piix.o
CC x86_64-softmmu/hw/i386/pc_q35.o
CC x86_64-softmmu/hw/i386/pc_sysfw.o
CC x86_64-softmmu/hw/i386/x86-iommu.o
CC x86_64-softmmu/hw/i386/intel_iommu.o
CC x86_64-softmmu/hw/i386/amd_iommu.o
CC x86_64-softmmu/hw/i386/vmport.o
CC x86_64-softmmu/hw/i386/vmmouse.o
CC x86_64-softmmu/hw/i386/kvmvapic.o
CC x86_64-softmmu/hw/i386/acpi-build.o
CC x86_64-softmmu/target/i386/helper.o
CC x86_64-softmmu/target/i386/cpu.o
CC x86_64-softmmu/target/i386/gdbstub.o
CC x86_64-softmmu/target/i386/xsave_helper.o
CC x86_64-softmmu/target/i386/translate.o
CC x86_64-softmmu/target/i386/bpt_helper.o
CC x86_64-softmmu/target/i386/cc_helper.o
CC x86_64-softmmu/target/i386/excp_helper.o
CC x86_64-softmmu/target/i386/fpu_helper.o
CC x86_64-softmmu/target/i386/int_helper.o
CC x86_64-softmmu/target/i386/mem_helper.o
CC x86_64-softmmu/target/i386/misc_helper.o
CC x86_64-softmmu/target/i386/mpx_helper.o
CC x86_64-softmmu/target/i386/seg_helper.o
CC x86_64-softmmu/target/i386/smm_helper.o
CC x86_64-softmmu/target/i386/svm_helper.o
CC x86_64-softmmu/target/i386/machine.o
CC x86_64-softmmu/target/i386/arch_memory_mapping.o
CC x86_64-softmmu/target/i386/arch_dump.o
CC x86_64-softmmu/target/i386/monitor.o
CC x86_64-softmmu/target/i386/kvm-stub.o
CC x86_64-softmmu/target/i386/hyperv-stub.o
CC x86_64-softmmu/target/i386/hax-all.o
CC x86_64-softmmu/target/i386/hax-mem.o
CC x86_64-softmmu/target/i386/hax-windows.o
CC x86_64-softmmu/target/i386/sev-stub.o
GEN trace/generated-helpers.c
CC x86_64-softmmu/trace/control-target.o
CC x86_64-softmmu/gdbstub-xml.o
CC x86_64-softmmu/trace/generated-helpers.o
In file included from /tmp/qemu-test/src/hw/intc/bcm2836_control.c:18:0:
/tmp/qemu-test/src/hw/intc/bcm2836_control.c: In function 'bcm2836_control_write':
/tmp/qemu-test/src/hw/intc/bcm2836_control.c:207:40: error: format '%lx' expects argument of type 'long unsigned int', but argument 4 has type 'uint64_t {aka long long unsigned int}' [-Werror=format=]
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%"HWADDR_PRIx" 0x%lx\n",
^
/tmp/qemu-test/src/include/qemu/log.h:85:22: note: in definition of macro 'qemu_log_mask'
qemu_log(FMT, ## __VA_ARGS__); \
^~~
/tmp/qemu-test/src/hw/intc/bcm2836_control.c:207:77: note: format string is defined here
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%"HWADDR_PRIx" 0x%lx\n",
~~^
%llx
cc1: all warnings being treated as errors
make[1]: *** [/tmp/qemu-test/src/rules.mak:69: hw/intc/bcm2836_control.o] Error 1
make: *** [Makefile:483: subdir-aarch64-softmmu] Error 2
make: *** Waiting for unfinished jobs....
LINK x86_64-softmmu/qemu-system-x86_64w.exe
GEN x86_64-softmmu/qemu-system-x86_64.exe
Traceback (most recent call last):
File "./tests/docker/docker.py", line 563, in <module>
sys.exit(main())
File "./tests/docker/docker.py", line 560, in main
return args.cmdobj.run(args, argv)
File "./tests/docker/docker.py", line 306, in run
return Docker().run(argv, args.keep, quiet=args.quiet)
File "./tests/docker/docker.py", line 274, in run
quiet=quiet)
File "./tests/docker/docker.py", line 181, in _do_check
return subprocess.check_call(self._command + cmd, **kwargs)
File "/usr/lib64/python2.7/subprocess.py", line 186, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['sudo', '-n', 'docker', 'run', '--label', 'com.qemu.instance.uuid=cb397190e17311e8a2b952540069c830', '-u', '1000', '--security-opt', 'seccomp=unconfined', '--rm', '--net=none', '-e', 'TARGET_LIST=', '-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=8', '-e', 'DEBUG=', '-e', 'SHOW_ENV=1', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', '/home/patchew/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', '/var/tmp/patchew-tester-tmp-pvww0as4/src/docker-src.2018-11-05-22.26.31.3469:/var/tmp/qemu:z,ro', 'qemu:fedora', '/var/tmp/qemu/run', 'test-mingw']' returned non-zero exit status 2
make[1]: *** [tests/docker/Makefile.include:217: docker-run] Error 1
make[1]: Leaving directory '/var/tmp/patchew-tester-tmp-pvww0as4/src'
make: *** [tests/docker/Makefile.include:251: docker-run-test-mingw@fedora] Error 2
real 2m12.359s
user 0m5.405s
sys 0m4.236s
=== OUTPUT END ===
Test command exited with code: 2
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 26+ messages in thread
end of thread, other threads:[~2018-11-06 3:29 UTC | newest]
Thread overview: 26+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-02 0:12 [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem) Philippe Mathieu-Daudé
2018-11-02 0:12 ` [Qemu-devel] [PATCH for 3.1 v2 1/7] MAINTAINERS: Add an entry for the Raspberry Pi machines Philippe Mathieu-Daudé
2018-11-05 15:25 ` Peter Maydell
2018-11-05 17:06 ` Andrew Baumann
2018-11-05 17:57 ` Peter Maydell
2018-11-05 17:59 ` Andrew Baumann
2018-11-02 0:12 ` [Qemu-devel] [PATCH for 3.2 v2 2/7] hw/misc/bcm2835_property: Handle the 'domain state' property Philippe Mathieu-Daudé
2018-11-05 15:33 ` Peter Maydell
2018-11-02 0:12 ` [Qemu-devel] [PATCH for 3.2 v2 3/7] hw/arm/bcm2835: Use 0x prefix for hex numbers Philippe Mathieu-Daudé
2018-11-05 15:39 ` Peter Maydell
2018-11-05 16:12 ` Philippe Mathieu-Daudé
2018-11-02 0:13 ` [Qemu-devel] [PATCH for 3.2 v2 4/7] hw/arm/bcm2835: Rename some definitions Philippe Mathieu-Daudé
2018-11-05 15:39 ` Peter Maydell
2018-11-02 0:13 ` [Qemu-devel] [PATCH for 3.2 v2 5/7] hw/arm/bcm2835: Add various unimplemented peripherals Philippe Mathieu-Daudé
2018-11-05 15:51 ` Peter Maydell
2018-11-02 0:13 ` [Qemu-devel] [PATCH for 3.2 v2 6/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem) Philippe Mathieu-Daudé
2018-11-05 16:02 ` Peter Maydell
2018-11-02 0:13 ` [Qemu-devel] [PATCH for 3.2 v2 7/7] MAINTAINERS: Volunteer to review Raspi patches Philippe Mathieu-Daudé
2018-11-05 15:51 ` Peter Maydell
2018-11-02 2:52 ` [Qemu-devel] [PATCH for 3.2 v2 0/7] hw/arm/bcm2835: Add basic support for cprman (clock subsystem) Guenter Roeck
2018-11-02 7:32 ` Philippe Mathieu-Daudé
2018-11-02 7:48 ` Philippe Mathieu-Daudé
2018-11-02 13:26 ` Guenter Roeck
2018-11-03 15:33 ` no-reply
2018-11-05 15:20 ` Peter Maydell
2018-11-06 3:28 ` no-reply
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.