R: [PATCH v3 08/11] devicetree: bindings: pci: document PARF params bindings

[<ansuelsmth@gmail.com>]

> On Fri, May 01, 2020 at 12:06:15AM +0200, Ansuel Smith wrote:
> > It is now supported the editing of Tx De-Emphasis, Tx Swing and
> > Rx equalization params on ipq8064. Document this new optional params.
> >
> > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > ---
> >  .../devicetree/bindings/pci/qcom,pcie.txt     | 36 +++++++++++++++++++
> >  1 file changed, 36 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> > index 6efcef040741..8cc5aea8a1da 100644
> > --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> > +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> > @@ -254,6 +254,42 @@
> >  			- "perst-gpios"	PCIe endpoint reset signal line
> >  			- "wake-gpios"	PCIe endpoint wake signal line
> >
> > +- qcom,tx-deemph-gen1:
> > +	Usage: optional (available for ipq/apq8064)
> > +	Value type: <u32>
> > +	Definition: Gen1 De-emphasis value.
> > +		    For ipq806x should be set to 24.
> 
> Unless these need to be tuned per board, then the compatible string for
> ipq806x should imply all these settings.
> 

It was requested by v2 to make this settings tunable. These don't change are
all the same for every ipq806x SoC. The original implementation had this 
value hardcoded for ipq806x. Should I restore this and drop this patch? 
Anyway thanks for the review. 

> > +
> > +- qcom,tx-deemph-gen2-3p5db:
> > +	Usage: optional (available for ipq/apq8064)
> > +	Value type: <u32>
> > +	Definition: Gen2 (3.5db) De-emphasis value.
> > +		    For ipq806x should be set to 24.
> > +
> > +- qcom,tx-deemph-gen2-6db:
> > +	Usage: optional (available for ipq/apq8064)
> > +	Value type: <u32>
> > +	Definition: Gen2 (6db) De-emphasis value.
> > +		    For ipq806x should be set to 34.
> > +
> > +- qcom,tx-swing-full:
> > +	Usage: optional (available for ipq/apq8064)
> > +	Value type: <u32>
> > +	Definition: TX launch amplitude swing_full value.
> > +		    For ipq806x should be set to 120.
> > +
> > +- qcom,tx-swing-low:
> > +	Usage: optional (available for ipq/apq8064)
> > +	Value type: <u32>
> > +	Definition: TX launch amplitude swing_low value.
> > +		    For ipq806x should be set to 120.
> > +
> > +- qcom,rx0-eq:
> > +	Usage: optional (available for ipq/apq8064)
> > +	Value type: <u32>
> > +	Definition: RX0 equalization value.
> > +		    For ipq806x should be set to 4.
> > +
> >  * Example for ipq/apq8064
> >  	pcie@1b500000 {
> >  		compatible = "qcom,pcie-apq8064", "qcom,pcie-ipq8064",
> "snps,dw-pcie";
> > --
> > 2.25.1
> >