[PATCH v4 0/3] Add Intel ComboPhy driver

[PATCH v4 0/3] Add Intel ComboPhy driver

[Dilip Kota]

This patch series adds Intel Combophy driver, respective yaml schemas
and a kernel API fwnode_to_regmap().
ComboPhy driver calls it to get regmap handle through firmware node.

Dilip Kota (3):
  mfd: syscon: Add fwnode_to_regmap
  dt-bindings: phy: Add YAML schemas for Intel Combophy
  phy: intel: Add driver support for Combophy

 .../devicetree/bindings/phy/intel,combo-phy.yaml   | 123 ++++
 drivers/mfd/syscon.c                               |   8 +
 drivers/phy/intel/Kconfig                          |  14 +
 drivers/phy/intel/Makefile                         |   1 +
 drivers/phy/intel/phy-intel-combo.c                | 661 +++++++++++++++++++++
 include/dt-bindings/phy/phy-intel-combophy.h       |  10 +
 include/linux/mfd/syscon.h                         |   6 +
 7 files changed, 823 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
 create mode 100644 drivers/phy/intel/phy-intel-combo.c
 create mode 100644 include/dt-bindings/phy/phy-intel-combophy.h

-- 
2.11.0

[PATCH v4 1/3] mfd: syscon: Add fwnode_to_regmap

[Dilip Kota]

Traverse regmap handle entry from firmware node handle.

Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
---
Changes on v4:
  No changes

 drivers/mfd/syscon.c       | 8 ++++++++
 include/linux/mfd/syscon.h | 6 ++++++
 2 files changed, 14 insertions(+)

diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index e22197c832e8..08064ffc5394 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -178,6 +178,14 @@ struct regmap *device_node_to_regmap(struct device_node *np)
 }
 EXPORT_SYMBOL_GPL(device_node_to_regmap);
 
+struct regmap *fwnode_to_regmap(struct fwnode_handle *fwnode)
+{
+	struct device_node *np = to_of_node(fwnode);
+
+	return device_node_get_regmap(np, false);
+}
+EXPORT_SYMBOL_GPL(fwnode_to_regmap);
+
 struct regmap *syscon_node_to_regmap(struct device_node *np)
 {
 	if (!of_device_is_compatible(np, "syscon"))
diff --git a/include/linux/mfd/syscon.h b/include/linux/mfd/syscon.h
index 112dc66262cc..a024dd88bdd4 100644
--- a/include/linux/mfd/syscon.h
+++ b/include/linux/mfd/syscon.h
@@ -18,6 +18,7 @@ struct device_node;
 
 #ifdef CONFIG_MFD_SYSCON
 extern struct regmap *device_node_to_regmap(struct device_node *np);
+extern struct regmap *fwnode_to_regmap(struct fwnode_handle *fwnode);
 extern struct regmap *syscon_node_to_regmap(struct device_node *np);
 extern struct regmap *syscon_regmap_lookup_by_compatible(const char *s);
 extern struct regmap *syscon_regmap_lookup_by_phandle(
@@ -29,6 +30,11 @@ static inline struct regmap *device_node_to_regmap(struct device_node *np)
 	return ERR_PTR(-ENOTSUPP);
 }
 
+static inline struct regmap *fwnode_to_regmap(struct fwnode_handle *fwnode)
+{
+	return ERR_PTR(-ENOTSUPP);
+}
+
 static inline struct regmap *syscon_node_to_regmap(struct device_node *np)
 {
 	return ERR_PTR(-ENOTSUPP);
-- 
2.11.0

[PATCH v4 2/3] dt-bindings: phy: Add YAML schemas for Intel Combophy

[Dilip Kota]

Combophy subsystem provides PHY support to various
controllers, viz. PCIe, SATA and EMAC.
Adding YAML schemas for the same.

Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
---
Changes on v4:
  No changes.

Changes on v3:

 Add include/dt-bindings/phy/phy-intel-combphy.h for phy modes.
 Add SoC specific compatible "intel,combophy-lgm".
 Correct the nodename pattern.
 clocks description removed and add maxItems entry.
 Remove "simple-bus" as it expects minimum one address
  cell and size cell in the children node. Call devm_of_platform_populate()
  in the driver to perform "simple-bus" functionality.

Changes on v2:

 Add custom 'select'
 Pass hardware instance entries with phandles and
   remove cell-index and bid entries
 Clock, register address space, are same for the children.
   So move them to parent node.
 Two PHY instances cannot run in different modes,
   so move the phy-mode entry to parent node.
 Add second child entry in the DT example.

 .../devicetree/bindings/phy/intel,combo-phy.yaml   | 123 +++++++++++++++++++++
 include/dt-bindings/phy/phy-intel-combophy.h       |  10 ++
 2 files changed, 133 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
 create mode 100644 include/dt-bindings/phy/phy-intel-combophy.h

diff --git a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
new file mode 100644
index 000000000000..f9bae37fab17
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,combo-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel ComboPhy Subsystem
+
+maintainers:
+  - Dilip Kota <eswara.kota@linux.intel.com>
+
+description: |
+  Intel Combophy subsystem supports PHYs for PCIe, EMAC and SATA
+  controllers. A single Combophy provides two PHY instances.
+
+properties:
+  $nodename:
+    pattern: "combophy(@.*|-[0-9a-f])*$"
+
+  compatible:
+    items:
+      - const: intel,combophy-lgm
+      - const: intel,combo-phy
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    items:
+      - description: ComboPhy core registers
+      - description: PCIe app core control registers
+
+  reg-names:
+    items:
+      - const: core
+      - const: app
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: phy
+      - const: core
+
+  intel,syscfg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: Chip configuration registers handle and ComboPhy instance id
+
+  intel,hsio:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: HSIO registers handle and ComboPhy instance id on NOC
+
+  intel,aggregation:
+    type: boolean
+    description: |
+      Specify the flag to configure ComboPHY in dual lane mode.
+
+  intel,phy-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Mode of the two phys in ComboPhy.
+      See dt-bindings/phy/phy-intel-combophy.h for values.
+
+patternProperties:
+  "^phy@[0-9]+$":
+    type: object
+
+    properties:
+      compatible:
+        const: intel,phydev
+
+      "#phy-cells":
+        const: 0
+
+      resets:
+        description: |
+          reset handle according to the PHY mode.
+          See ../reset/reset.txt for details.
+
+    required:
+      - compatible
+      - "#phy-cells"
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - reg-names
+  - intel,syscfg
+  - intel,hsio
+  - intel,phy-mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy-intel-combophy.h>
+    combophy@d0a00000 {
+        compatible = "intel,combophy-lgm", "intel,combo-phy";
+        clocks = <&cgu0 1>;
+        reg = <0xd0a00000 0x40000>,
+              <0xd0a40000 0x1000>;
+        reg-names = "core", "app";
+        resets = <&rcu0 0x50 6>,
+                 <&rcu0 0x50 17>;
+        reset-names = "phy", "core";
+        intel,syscfg = <&sysconf 0>;
+        intel,hsio = <&hsiol 0>;
+        intel,phy-mode = <COMBO_PHY_PCIE>;
+
+        phy@0 {
+            compatible = "intel,phydev";
+            #phy-cells = <0>;
+            resets = <&rcu0 0x50 23>;
+        };
+
+        phy@1 {
+            compatible = "intel,phydev";
+            #phy-cells = <0>;
+            resets = <&rcu0 0x50 24>;
+        };
+    };
diff --git a/include/dt-bindings/phy/phy-intel-combophy.h b/include/dt-bindings/phy/phy-intel-combophy.h
new file mode 100644
index 000000000000..bd7f6377f4ef
--- /dev/null
+++ b/include/dt-bindings/phy/phy-intel-combophy.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _DT_BINDINGS_INTEL_COMBOPHY
+#define _DT_BINDINGS_INTEL_COMBOPHY
+
+#define COMBO_PHY_PCIE	0
+#define COMBO_PHY_XPCS	1
+#define COMBO_PHY_SATA	2
+
+#endif /* _DT_BINDINGS_INTEL_COMBOPHY*/
-- 
2.11.0

[PATCH v4 3/3] phy: intel: Add driver support for ComboPhy

[Dilip Kota]

ComboPhy subsystem provides PHYs for various
controllers like PCIe, SATA and EMAC.

Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
---
Changes on v4:
 Address review comments
   Remove dependency on OF config
   Update copyright to 2019-2020
   Define register macro PAD_DIS_CFG instead of const variable inside function.
   Improve the error prints, and error returns.
   Call put_device(dev), for get_dev_from_fwnode()
   Move platform_set_drvdata() at the end of the probe().
   Correct alignment in phy_ops intel_cbphy_ops.
   Correct commented lines with proper vocabulary and punctuation.
   Add/remove commas for the required constant arrays and enums.
   Remove in driver:
     linux/kernel.h, not required
     macros: PCIE_PHY_MPLLA_CTRL, PCIE_PHY_MPLLB_CTRL
     temp variable u32 prop;
   Change function names:
     intel_cbphy_iphy_dt_parse() -> intel_cbphy_iphy_fwnode_parse()
     intel_cbphy_dt_sanity_check() -> intel_cbphy_sanity_check()
     intel_cbphy_dt_parse() -> intel_cbphy_fwnode_parse()

Changes on v3:
 Remove intel_iphy_names
 Remove struct phy in struct intel_cbphy_iphy
 Imporve if conditions logic
 Use fwnode_to_regmap()
 Call devm_of_platform_populate() to populate child nodes
 Fix reset sequence during phy_init
 Add SoC specific compatible "intel,combophy-lgm"
 Add description for enums
 Remove default case in switch {} intel_cbphy_set_mode() as it
  never happens.
 Use mutex_lock to synchronise combophy initialization across
  two phys.
 Change init_cnt to u32 datatype as it is within mutex lock.
 Correct error handling of
  fwnode_property_read_u32_array(fwnode, "intel,phy-mode", ...)

 drivers/phy/intel/Kconfig           |  14 +
 drivers/phy/intel/Makefile          |   1 +
 drivers/phy/intel/phy-intel-combo.c | 661 ++++++++++++++++++++++++++++++++++++
 3 files changed, 676 insertions(+)
 create mode 100644 drivers/phy/intel/phy-intel-combo.c

diff --git a/drivers/phy/intel/Kconfig b/drivers/phy/intel/Kconfig
index 4ea6a8897cd7..14705b80ec8b 100644
--- a/drivers/phy/intel/Kconfig
+++ b/drivers/phy/intel/Kconfig
@@ -2,6 +2,20 @@
 #
 # Phy drivers for Intel Lightning Mountain(LGM) platform
 #
+config PHY_INTEL_COMBO
+	bool "Intel ComboPHY driver"
+	depends on X86 || COMPILE_TEST
+	depends on HAS_IOMEM
+	select MFD_SYSCON
+	select GENERIC_PHY
+	select REGMAP
+	help
+	  Enable this to support Intel ComboPhy.
+
+	  This driver configures ComboPhy subsystem on Intel gateway
+	  chipsets which provides PHYs for various controllers, EMAC,
+	  SATA and PCIe.
+
 config PHY_INTEL_EMMC
 	tristate "Intel EMMC PHY driver"
 	select GENERIC_PHY
diff --git a/drivers/phy/intel/Makefile b/drivers/phy/intel/Makefile
index 6b876a75599d..233d530dadde 100644
--- a/drivers/phy/intel/Makefile
+++ b/drivers/phy/intel/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PHY_INTEL_COMBO)		+= phy-intel-combo.o
 obj-$(CONFIG_PHY_INTEL_EMMC)            += phy-intel-emmc.o
diff --git a/drivers/phy/intel/phy-intel-combo.c b/drivers/phy/intel/phy-intel-combo.c
new file mode 100644
index 000000000000..0ae628b6bcd9
--- /dev/null
+++ b/drivers/phy/intel/phy-intel-combo.c
@@ -0,0 +1,661 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Combo-PHY driver
+ *
+ * Copyright (C) 2019-2020 Intel Corporation.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#define PCIE_PHY_GEN_CTRL	0x00
+#define PCIE_PHY_CLK_PAD	BIT(17)
+
+#define PAD_DIS_CFG		0x174
+
+#define PCS_XF_ATE_OVRD_IN_2	0x3008
+#define ADAPT_REQ_MSK		GENMASK(5, 4)
+
+#define PCS_XF_RX_ADAPT_ACK	0x3010
+#define RX_ADAPT_ACK_BIT	BIT(0)
+
+#define CR_ADDR(addr, lane)	(((addr) + (lane) * 0x100) << 2)
+#define REG_COMBO_MODE(x)	((x) * 0x200)
+#define REG_CLK_DISABLE(x)	((x) * 0x200 + 0x124)
+
+#define COMBO_PHY_ID(x)		((x)->parent->id)
+#define PHY_ID(x)		((x)->id)
+
+#define CLK_100MHZ		100000000
+#define CLK_156_25MHZ		156250000
+
+static const unsigned long intel_iphy_clk_rates[] = {
+	CLK_100MHZ, CLK_156_25MHZ, CLK_100MHZ,
+};
+
+enum {
+	PHY_0,
+	PHY_1,
+	PHY_MAX_NUM
+};
+
+/*
+ * Clock Register bit fields to enable clocks
+ * for ComboPhy according to the mode.
+ */
+enum intel_phy_mode {
+	PHY_PCIE_MODE = 0,
+	PHY_XPCS_MODE,
+	PHY_SATA_MODE
+};
+
+/* ComboPhy mode Register values */
+enum intel_combo_mode {
+	PCIE0_PCIE1_MODE = 0,
+	PCIE_DL_MODE,
+	RXAUI_MODE,
+	XPCS0_XPCS1_MODE,
+	SATA0_SATA1_MODE
+};
+
+enum aggregated_mode {
+	PHY_SL_MODE,
+	PHY_DL_MODE
+};
+
+struct intel_combo_phy;
+
+struct intel_cbphy_iphy {
+	struct device		*dev;
+	bool			enable;
+	struct intel_combo_phy	*parent;
+	struct reset_control	*app_rst;
+	u32			id;
+};
+
+struct intel_combo_phy {
+	struct device		*dev;
+	struct clk		*core_clk;
+	unsigned long		clk_rate;
+	void __iomem		*app_base;
+	void __iomem		*cr_base;
+	struct regmap		*syscfg;
+	struct regmap		*hsiocfg;
+	u32			id;
+	u32			bid;
+	struct reset_control	*phy_rst;
+	struct reset_control	*core_rst;
+	struct intel_cbphy_iphy	iphy[PHY_MAX_NUM];
+	enum intel_phy_mode	phy_mode;
+	enum aggregated_mode	aggr_mode;
+	u32			init_cnt;
+	struct mutex		lock;
+};
+
+static int intel_cbphy_iphy_enable(struct intel_cbphy_iphy *iphy, bool set)
+{
+	struct intel_combo_phy *cbphy = iphy->parent;
+	u32 mask = BIT(cbphy->phy_mode * 2 + iphy->id);
+	u32 val;
+
+	/* Register: 0 is enable, 1 is disable */
+	val = set ? 0 : mask;
+
+	return regmap_update_bits(cbphy->hsiocfg, REG_CLK_DISABLE(cbphy->bid),
+				  mask, val);
+}
+
+static int intel_cbphy_pcie_refclk_cfg(struct intel_cbphy_iphy *iphy, bool set)
+{
+	struct intel_combo_phy *cbphy = iphy->parent;
+	u32 mask = BIT(cbphy->id * 2 + iphy->id);
+	u32 val;
+
+	/* Register: 0 is enable, 1 is disable */
+	val = set ? 0 : mask;
+
+	return regmap_update_bits(cbphy->syscfg, PAD_DIS_CFG, mask, val);
+}
+
+static inline void combo_phy_w32_off_mask(void __iomem *base, unsigned int reg,
+					  u32 mask, u32 val)
+{
+	u32 reg_val;
+
+	reg_val = readl(base + reg);
+	reg_val &= ~mask;
+	reg_val |= FIELD_PREP(mask, val);
+	writel(reg_val, base + reg);
+}
+
+static int intel_cbphy_iphy_cfg(struct intel_cbphy_iphy *iphy,
+				int (*phy_cfg)(struct intel_cbphy_iphy *))
+{
+	struct intel_combo_phy *cbphy = iphy->parent;
+	struct intel_cbphy_iphy *sphy;
+	int ret;
+
+	ret = phy_cfg(iphy);
+	if (ret)
+		return ret;
+
+	if (cbphy->aggr_mode != PHY_DL_MODE)
+		return 0;
+
+	sphy = &cbphy->iphy[PHY_1];
+
+	return phy_cfg(sphy);
+}
+
+static int intel_cbphy_pcie_en_pad_refclk(struct intel_cbphy_iphy *iphy)
+{
+	struct intel_combo_phy *cbphy = iphy->parent;
+	int ret;
+
+	ret = intel_cbphy_pcie_refclk_cfg(iphy, true);
+	if (ret) {
+		dev_err(iphy->dev, "Failed to enable PCIe pad refclk\n");
+		return ret;
+	}
+
+	if (cbphy->init_cnt)
+		return 0;
+
+	combo_phy_w32_off_mask(cbphy->app_base, PCIE_PHY_GEN_CTRL,
+			       PCIE_PHY_CLK_PAD, 0);
+
+	/* Delay for stable clock PLL */
+	usleep_range(50, 100);
+
+	return 0;
+}
+
+static int intel_cbphy_pcie_dis_pad_refclk(struct intel_cbphy_iphy *iphy)
+{
+	struct intel_combo_phy *cbphy = iphy->parent;
+	int ret;
+
+	ret = intel_cbphy_pcie_refclk_cfg(iphy, false);
+	if (ret) {
+		dev_err(iphy->dev, "Failed to disable PCIe pad refclk\n");
+		return ret;
+	}
+
+	if (cbphy->init_cnt)
+		return 0;
+
+	combo_phy_w32_off_mask(cbphy->app_base, PCIE_PHY_GEN_CTRL,
+			       PCIE_PHY_CLK_PAD, 1);
+
+	return 0;
+}
+
+static int intel_cbphy_set_mode(struct intel_combo_phy *cbphy)
+{
+	enum aggregated_mode aggr = cbphy->aggr_mode;
+	struct device *dev = cbphy->dev;
+	enum intel_combo_mode cb_mode;
+	enum intel_phy_mode mode;
+	int ret;
+
+	mode = cbphy->phy_mode;
+
+	switch (mode) {
+	case PHY_PCIE_MODE:
+		cb_mode = (aggr == PHY_DL_MODE) ? PCIE_DL_MODE : PCIE0_PCIE1_MODE;
+		break;
+
+	case PHY_XPCS_MODE:
+		cb_mode = (aggr == PHY_DL_MODE) ? RXAUI_MODE : XPCS0_XPCS1_MODE;
+		break;
+
+	case PHY_SATA_MODE:
+		if (aggr == PHY_DL_MODE) {
+			dev_err(dev, "Mode:%u not support dual lane!\n", mode);
+			return -EINVAL;
+		}
+
+		cb_mode = SATA0_SATA1_MODE;
+		break;
+	}
+
+	ret = regmap_write(cbphy->hsiocfg, REG_COMBO_MODE(cbphy->bid), cb_mode);
+	if (ret)
+		dev_err(dev, "Failed to set ComboPhy mode: %d\n", ret);
+
+	return ret;
+}
+
+static void intel_cbphy_rst_assert(struct intel_combo_phy *cbphy)
+{
+	reset_control_assert(cbphy->core_rst);
+	reset_control_assert(cbphy->phy_rst);
+}
+
+static void intel_cbphy_rst_deassert(struct intel_combo_phy *cbphy)
+{
+	reset_control_deassert(cbphy->core_rst);
+	reset_control_deassert(cbphy->phy_rst);
+	/* Delay to ensure reset process is done */
+	usleep_range(10, 20);
+}
+
+static int intel_cbphy_iphy_power_on(struct intel_cbphy_iphy *iphy)
+{
+	struct intel_combo_phy *cbphy = iphy->parent;
+	struct device *dev = iphy->dev;
+	int ret;
+
+	if (!cbphy->init_cnt) {
+		ret = clk_prepare_enable(cbphy->core_clk);
+		if (ret) {
+			dev_err(cbphy->dev, "Clock enable failed!\n");
+			return ret;
+		}
+
+		ret = clk_set_rate(cbphy->core_clk, cbphy->clk_rate);
+		if (ret) {
+			dev_err(cbphy->dev, "Clock freq set to %lu failed!\n",
+				cbphy->clk_rate);
+			goto clk_err;
+		}
+
+		intel_cbphy_rst_assert(cbphy);
+		intel_cbphy_rst_deassert(cbphy);
+		ret = intel_cbphy_set_mode(cbphy);
+		if (ret)
+			goto clk_err;
+	}
+
+	ret = intel_cbphy_iphy_enable(iphy, true);
+	if (ret) {
+		dev_err(dev, "Failed enabling PHY core\n");
+		goto clk_err;
+	}
+
+	ret = reset_control_deassert(iphy->app_rst);
+	if (ret) {
+		dev_err(dev, "PHY(%u:%u) reset deassert failed!\n",
+			COMBO_PHY_ID(iphy), PHY_ID(iphy));
+		goto clk_err;
+	}
+
+	/* Delay to ensure reset process is done */
+	udelay(1);
+
+	return 0;
+
+clk_err:
+	clk_disable_unprepare(cbphy->core_clk);
+
+	return ret;
+}
+
+static int intel_cbphy_iphy_power_off(struct intel_cbphy_iphy *iphy)
+{
+	struct intel_combo_phy *cbphy = iphy->parent;
+	struct device *dev = iphy->dev;
+	int ret;
+
+	ret = reset_control_assert(iphy->app_rst);
+	if (ret) {
+		dev_err(dev, "PHY(%u:%u) reset assert failed!\n",
+			COMBO_PHY_ID(iphy), PHY_ID(iphy));
+		return ret;
+	}
+
+	ret = intel_cbphy_iphy_enable(iphy, false);
+	if (ret) {
+		dev_err(dev, "Failed disabling PHY core\n");
+		return ret;
+	}
+
+	if (!cbphy->init_cnt) {
+		clk_disable_unprepare(cbphy->core_clk);
+		intel_cbphy_rst_assert(cbphy);
+	}
+
+	return 0;
+}
+
+static int intel_cbphy_init(struct phy *phy)
+{
+	struct intel_cbphy_iphy *iphy = phy_get_drvdata(phy);
+	struct intel_combo_phy *cbphy = iphy->parent;
+	int ret;
+
+	mutex_lock(&cbphy->lock);
+	ret = intel_cbphy_iphy_cfg(iphy, intel_cbphy_iphy_power_on);
+	if (ret)
+		goto err;
+
+	if (cbphy->phy_mode == PHY_PCIE_MODE) {
+		ret = intel_cbphy_iphy_cfg(iphy, intel_cbphy_pcie_en_pad_refclk);
+		if (ret)
+			goto err;
+	}
+
+	cbphy->init_cnt++;
+
+err:
+	mutex_unlock(&cbphy->lock);
+
+	return ret;
+}
+
+static int intel_cbphy_exit(struct phy *phy)
+{
+	struct intel_cbphy_iphy *iphy = phy_get_drvdata(phy);
+	struct intel_combo_phy *cbphy = iphy->parent;
+	int ret;
+
+	mutex_lock(&cbphy->lock);
+	cbphy->init_cnt--;
+	if (cbphy->phy_mode == PHY_PCIE_MODE) {
+		ret = intel_cbphy_iphy_cfg(iphy, intel_cbphy_pcie_dis_pad_refclk);
+		if (ret)
+			goto err;
+	}
+
+	ret = intel_cbphy_iphy_cfg(iphy, intel_cbphy_iphy_power_off);
+
+err:
+	mutex_unlock(&cbphy->lock);
+
+	return ret;
+}
+
+static int intel_cbphy_calibrate(struct phy *phy)
+{
+	struct intel_cbphy_iphy *iphy = phy_get_drvdata(phy);
+	struct intel_combo_phy *cbphy = iphy->parent;
+	void __iomem *cr_base = cbphy->cr_base;
+	struct device *dev = iphy->dev;
+	int val, ret, id;
+
+	if (cbphy->phy_mode != PHY_XPCS_MODE)
+		return 0;
+
+	id = PHY_ID(iphy);
+
+	/* trigger auto RX adaptation */
+	combo_phy_w32_off_mask(cr_base, CR_ADDR(PCS_XF_ATE_OVRD_IN_2, id),
+			       ADAPT_REQ_MSK, 3);
+	/* Wait RX adaptation to finish */
+	ret = readl_poll_timeout(cr_base + CR_ADDR(PCS_XF_RX_ADAPT_ACK, id),
+				 val, val & RX_ADAPT_ACK_BIT, 10, 5000);
+	if (ret)
+		dev_err(dev, "RX Adaptation failed!\n");
+	else
+		dev_dbg(dev, "RX Adaptation success!\n");
+
+	/* Stop RX adaptation */
+	combo_phy_w32_off_mask(cr_base, CR_ADDR(PCS_XF_ATE_OVRD_IN_2, id),
+			       ADAPT_REQ_MSK, 0);
+
+	return ret;
+}
+
+static int intel_cbphy_iphy_fwnode_parse(struct intel_combo_phy *cbphy,
+					 struct fwnode_handle *fwnode, int idx)
+{
+	struct intel_cbphy_iphy *iphy = &cbphy->iphy[idx];
+	struct device *dev = get_dev_from_fwnode(fwnode);
+	int ret = 0;
+
+	iphy->parent = cbphy;
+	iphy->dev = dev;
+	iphy->id = idx;
+
+	iphy->app_rst = devm_reset_control_get_optional(dev, NULL);
+	if (IS_ERR(iphy->app_rst)) {
+		ret = PTR_ERR(iphy->app_rst);
+		if (ret != -EPROBE_DEFER) {
+			dev_err(dev, "PHY[%u:%u] Get reset ctrl Err!\n",
+				COMBO_PHY_ID(iphy), PHY_ID(iphy));
+		}
+	} else {
+		iphy->enable = true;
+	}
+
+	put_device(dev);
+	return ret;
+}
+
+static int intel_cbphy_sanity_check(struct intel_combo_phy *cbphy)
+{
+	struct intel_cbphy_iphy *iphy0, *iphy1;
+
+	iphy0 = &cbphy->iphy[PHY_0];
+	iphy1 = &cbphy->iphy[PHY_1];
+
+	if (!iphy0->enable && !iphy1->enable) {
+		dev_err(cbphy->dev, "CBPHY%u both PHY disabled!\n", cbphy->id);
+		return -ENODEV;
+	}
+
+	if (cbphy->aggr_mode == PHY_DL_MODE && (!iphy0->enable || !iphy1->enable)) {
+		dev_err(cbphy->dev,
+			"Dual lane mode but lane0: %s, lane1: %s\n",
+			iphy0->enable ? "on" : "off",
+			iphy1->enable ? "on" : "off");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int intel_cbphy_fwnode_parse(struct intel_combo_phy *cbphy)
+{
+	struct device *dev = cbphy->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct fwnode_handle *fwnode = dev_fwnode(dev);
+	struct fwnode_reference_args ref;
+	int i, ret;
+
+	cbphy->core_clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(cbphy->core_clk)) {
+		ret = PTR_ERR(cbphy->core_clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Get clk failed:%d!\n", ret);
+		return ret;
+	}
+
+	cbphy->phy_rst = devm_reset_control_get_optional(dev, "phy");
+	if (IS_ERR(cbphy->phy_rst)) {
+		ret = PTR_ERR(cbphy->phy_rst);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Get PHY reset control err: %d!\n", ret);
+		return ret;
+	}
+
+	cbphy->core_rst = devm_reset_control_get_optional(dev, "core");
+	if (IS_ERR(cbphy->core_rst)) {
+		ret = PTR_ERR(cbphy->core_rst);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Get core reset control err: %d!\n", ret);
+		return ret;
+	}
+
+	cbphy->app_base = devm_platform_ioremap_resource_byname(pdev, "app");
+	if (IS_ERR(cbphy->app_base))
+		return PTR_ERR(cbphy->app_base);
+
+	cbphy->cr_base = devm_platform_ioremap_resource_byname(pdev, "core");
+	if (IS_ERR(cbphy->cr_base))
+		return PTR_ERR(cbphy->cr_base);
+
+	ret = fwnode_property_get_reference_args(fwnode, "intel,syscfg", NULL,
+						 1, 0, &ref);
+	if (ret < 0)
+		return ret;
+
+	cbphy->id = ref.args[0];
+	cbphy->syscfg = fwnode_to_regmap(ref.fwnode);
+	fwnode_handle_put(ref.fwnode);
+
+	ret = fwnode_property_get_reference_args(fwnode, "intel,hsio", NULL, 1,
+						 0, &ref);
+	if (ret < 0)
+		return ret;
+
+	cbphy->bid = ref.args[0];
+	cbphy->hsiocfg = fwnode_to_regmap(ref.fwnode);
+	fwnode_handle_put(ref.fwnode);
+
+	ret = fwnode_property_read_u32_array(fwnode, "intel,phy-mode",
+					     &cbphy->phy_mode, 1);
+	if (ret)
+		return ret;
+
+	if (cbphy->phy_mode > PHY_SATA_MODE) {
+		dev_err(dev, "Invalid PHY mode: %u\n", cbphy->phy_mode);
+		return -EINVAL;
+	}
+
+	cbphy->clk_rate = intel_iphy_clk_rates[cbphy->phy_mode];
+
+	if (fwnode_property_present(fwnode, "intel,aggregation"))
+		cbphy->aggr_mode = PHY_DL_MODE;
+	else
+		cbphy->aggr_mode = PHY_SL_MODE;
+
+	ret = devm_of_platform_populate(dev);
+	if (ret) {
+		dev_err(dev, "Failed to populate child nodes: %d\n", ret);
+		return ret;
+	}
+
+	i = 0;
+	fwnode_for_each_available_child_node(dev_fwnode(dev), fwnode) {
+		if (i >= PHY_MAX_NUM) {
+			fwnode_handle_put(fwnode);
+			dev_err(dev, "Error: DT child number larger than %d\n",
+				PHY_MAX_NUM);
+			return -EINVAL;
+		}
+
+		ret = intel_cbphy_iphy_fwnode_parse(cbphy, fwnode, i);
+		if (ret) {
+			fwnode_handle_put(fwnode);
+			return ret;
+		}
+
+		i++;
+	}
+
+	return intel_cbphy_sanity_check(cbphy);
+}
+
+static const struct phy_ops intel_cbphy_ops = {
+	.init		= intel_cbphy_init,
+	.exit		= intel_cbphy_exit,
+	.calibrate	= intel_cbphy_calibrate,
+	.owner		= THIS_MODULE,
+};
+
+static int intel_cbphy_iphy_create(struct intel_cbphy_iphy *iphy)
+{
+	struct intel_combo_phy *cbphy = iphy->parent;
+	struct phy_provider *phy_provider;
+	struct device *dev = iphy->dev;
+	struct phy *phy;
+
+	/* In dual mode skip phy creation for the second phy */
+	if (cbphy->aggr_mode == PHY_DL_MODE && iphy->id)
+		return 0;
+
+	phy = devm_phy_create(dev, NULL, &intel_cbphy_ops);
+	if (IS_ERR(phy)) {
+		dev_err(dev, "PHY[%u:%u]: create PHY instance failed!\n",
+			COMBO_PHY_ID(iphy), PHY_ID(iphy));
+		return PTR_ERR(phy);
+	}
+
+	phy_set_drvdata(phy, iphy);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider)) {
+		dev_err(dev, "PHY[%u:%u]: register phy provider failed!\n",
+			COMBO_PHY_ID(iphy), PHY_ID(iphy));
+	}
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static int intel_cbphy_create(struct intel_combo_phy *cbphy)
+{
+	struct intel_cbphy_iphy *iphy;
+	int i, ret;
+
+	for (i = 0; i < PHY_MAX_NUM; i++) {
+		iphy = &cbphy->iphy[i];
+		if (!iphy->enable)
+			continue;
+
+		ret = intel_cbphy_iphy_create(iphy);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int intel_cbphy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct intel_combo_phy *cbphy;
+	int ret;
+
+	cbphy = devm_kzalloc(dev, sizeof(*cbphy), GFP_KERNEL);
+	if (!cbphy)
+		return -ENOMEM;
+
+	cbphy->dev = dev;
+	cbphy->init_cnt = 0;
+	mutex_init(&cbphy->lock);
+	ret = intel_cbphy_fwnode_parse(cbphy);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, cbphy);
+	return intel_cbphy_create(cbphy);
+}
+
+static int intel_cbphy_remove(struct platform_device *pdev)
+{
+	struct intel_combo_phy *cbphy = platform_get_drvdata(pdev);
+
+	intel_cbphy_rst_assert(cbphy);
+	clk_disable_unprepare(cbphy->core_clk);
+	return 0;
+}
+
+static const struct of_device_id of_intel_cbphy_match[] = {
+	{ .compatible = "intel,combo-phy" },
+	{ .compatible = "intel,combophy-lgm" },
+	{}
+};
+
+static struct platform_driver intel_cbphy_driver = {
+	.probe = intel_cbphy_probe,
+	.remove = intel_cbphy_remove,
+	.driver = {
+		.name = "intel-combo-phy",
+		.of_match_table = of_intel_cbphy_match,
+	}
+};
+
+module_platform_driver(intel_cbphy_driver);
+
+MODULE_DESCRIPTION("Intel Combo-phy driver");
+MODULE_LICENSE("GPL v2");
-- 
2.11.0

Re: [PATCH v4 3/3] phy: intel: Add driver support for ComboPhy

[Andy Shevchenko]

On Mon, Mar 02, 2020 at 04:43:25PM +0800, Dilip Kota wrote:
> ComboPhy subsystem provides PHYs for various
> controllers like PCIe, SATA and EMAC.

Thanks for an update, my (few minor) comments below.

...

> +enum intel_phy_mode {
> +	PHY_PCIE_MODE = 0,
> +	PHY_XPCS_MODE,

> +	PHY_SATA_MODE

From here it's not visible that above is the only possible values.
Maybe in the future you will have another mode.
So, I suggest to leave comma here...

> +};

> +enum intel_combo_mode {
> +	PCIE0_PCIE1_MODE = 0,
> +	PCIE_DL_MODE,
> +	RXAUI_MODE,
> +	XPCS0_XPCS1_MODE,

> +	SATA0_SATA1_MODE

...and here...

> +};
> +
> +enum aggregated_mode {
> +	PHY_SL_MODE,

> +	PHY_DL_MODE

...and here.

> +};

...

> +static int intel_cbphy_iphy_cfg(struct intel_cbphy_iphy *iphy,
> +				int (*phy_cfg)(struct intel_cbphy_iphy *))
> +{
> +	struct intel_combo_phy *cbphy = iphy->parent;
> +	struct intel_cbphy_iphy *sphy;
> +	int ret;
> +
> +	ret = phy_cfg(iphy);
> +	if (ret)
> +		return ret;
> +
> +	if (cbphy->aggr_mode != PHY_DL_MODE)
> +		return 0;
> +

> +	sphy = &cbphy->iphy[PHY_1];

Do you really need temporary variable here?

> +
> +	return phy_cfg(sphy);
> +}

...

> +	if (!cbphy->init_cnt) {

	if (init_cnt)
		return 0;

?

> +		clk_disable_unprepare(cbphy->core_clk);
> +		intel_cbphy_rst_assert(cbphy);
> +	}
> +
> +	return 0;

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v4 2/3] dt-bindings: phy: Add YAML schemas for Intel Combophy

[Rob Herring]

On Mon, Mar 02, 2020 at 04:43:24PM +0800, Dilip Kota wrote:
> Combophy subsystem provides PHY support to various
> controllers, viz. PCIe, SATA and EMAC.
> Adding YAML schemas for the same.
> 
> Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
> ---
> Changes on v4:
>   No changes.
> 
> Changes on v3:
> 
>  Add include/dt-bindings/phy/phy-intel-combphy.h for phy modes.
>  Add SoC specific compatible "intel,combophy-lgm".
>  Correct the nodename pattern.
>  clocks description removed and add maxItems entry.
>  Remove "simple-bus" as it expects minimum one address
>   cell and size cell in the children node. Call devm_of_platform_populate()
>   in the driver to perform "simple-bus" functionality.
> 
> Changes on v2:
> 
>  Add custom 'select'
>  Pass hardware instance entries with phandles and
>    remove cell-index and bid entries
>  Clock, register address space, are same for the children.
>    So move them to parent node.
>  Two PHY instances cannot run in different modes,
>    so move the phy-mode entry to parent node.
>  Add second child entry in the DT example.
> 
>  .../devicetree/bindings/phy/intel,combo-phy.yaml   | 123 +++++++++++++++++++++
>  include/dt-bindings/phy/phy-intel-combophy.h       |  10 ++
>  2 files changed, 133 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
>  create mode 100644 include/dt-bindings/phy/phy-intel-combophy.h
> 
> diff --git a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
> new file mode 100644
> index 000000000000..f9bae37fab17
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
> @@ -0,0 +1,123 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/intel,combo-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Intel ComboPhy Subsystem
> +
> +maintainers:
> +  - Dilip Kota <eswara.kota@linux.intel.com>
> +
> +description: |
> +  Intel Combophy subsystem supports PHYs for PCIe, EMAC and SATA
> +  controllers. A single Combophy provides two PHY instances.
> +
> +properties:
> +  $nodename:
> +    pattern: "combophy(@.*|-[0-9a-f])*$"
> +
> +  compatible:
> +    items:
> +      - const: intel,combophy-lgm
> +      - const: intel,combo-phy
> +
> +  clocks:
> +    maxItems: 1
> +
> +  reg:
> +    items:
> +      - description: ComboPhy core registers
> +      - description: PCIe app core control registers
> +
> +  reg-names:
> +    items:
> +      - const: core
> +      - const: app
> +
> +  resets:
> +    maxItems: 2
> +
> +  reset-names:
> +    items:
> +      - const: phy
> +      - const: core
> +
> +  intel,syscfg:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description: Chip configuration registers handle and ComboPhy instance id
> +
> +  intel,hsio:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description: HSIO registers handle and ComboPhy instance id on NOC
> +
> +  intel,aggregation:
> +    type: boolean
> +    description: |
> +      Specify the flag to configure ComboPHY in dual lane mode.
> +
> +  intel,phy-mode:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: |
> +      Mode of the two phys in ComboPhy.
> +      See dt-bindings/phy/phy-intel-combophy.h for values.
> +
> +patternProperties:
> +  "^phy@[0-9]+$":
> +    type: object
> +
> +    properties:
> +      compatible:
> +        const: intel,phydev
> +
> +      "#phy-cells":
> +        const: 0
> +
> +      resets:
> +        description: |
> +          reset handle according to the PHY mode.
> +          See ../reset/reset.txt for details.
> +
> +    required:
> +      - compatible
> +      - "#phy-cells"
> +
> +required:
> +  - compatible
> +  - clocks
> +  - reg
> +  - reg-names
> +  - intel,syscfg
> +  - intel,hsio
> +  - intel,phy-mode
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/phy/phy-intel-combophy.h>
> +    combophy@d0a00000 {
> +        compatible = "intel,combophy-lgm", "intel,combo-phy";
> +        clocks = <&cgu0 1>;
> +        reg = <0xd0a00000 0x40000>,
> +              <0xd0a40000 0x1000>;
> +        reg-names = "core", "app";
> +        resets = <&rcu0 0x50 6>,
> +                 <&rcu0 0x50 17>;
> +        reset-names = "phy", "core";
> +        intel,syscfg = <&sysconf 0>;
> +        intel,hsio = <&hsiol 0>;
> +        intel,phy-mode = <COMBO_PHY_PCIE>;
> +
> +        phy@0 {

You need a 'reg' property to go with a unit-address.

Really, I'd just simplify this to make parent 'resets' be 4 entries and 
put '#phy-cells = <1>;' in the parent. Then you don't need these child 
nodes.

> +            compatible = "intel,phydev";
> +            #phy-cells = <0>;
> +            resets = <&rcu0 0x50 23>;
> +        };
> +
> +        phy@1 {
> +            compatible = "intel,phydev";
> +            #phy-cells = <0>;
> +            resets = <&rcu0 0x50 24>;
> +        };
> +    };
> diff --git a/include/dt-bindings/phy/phy-intel-combophy.h b/include/dt-bindings/phy/phy-intel-combophy.h
> new file mode 100644
> index 000000000000..bd7f6377f4ef
> --- /dev/null
> +++ b/include/dt-bindings/phy/phy-intel-combophy.h
> @@ -0,0 +1,10 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +#ifndef _DT_BINDINGS_INTEL_COMBOPHY
> +#define _DT_BINDINGS_INTEL_COMBOPHY
> +
> +#define COMBO_PHY_PCIE	0
> +#define COMBO_PHY_XPCS	1
> +#define COMBO_PHY_SATA	2

Use the PHY_TYPE_* defines we already have and extend as you need to.

> +
> +#endif /* _DT_BINDINGS_INTEL_COMBOPHY*/
> -- 
> 2.11.0
> 

Re: [PATCH v4 3/3] phy: intel: Add driver support for ComboPhy

[Dilip Kota]

On 3/2/2020 7:19 PM, Andy Shevchenko wrote:
> On Mon, Mar 02, 2020 at 04:43:25PM +0800, Dilip Kota wrote:
>> ComboPhy subsystem provides PHYs for various
>> controllers like PCIe, SATA and EMAC.
> Thanks for an update, my (few minor) comments below.
>
> ...
>
>> +enum intel_phy_mode {
>> +	PHY_PCIE_MODE = 0,
>> +	PHY_XPCS_MODE,
>> +	PHY_SATA_MODE
>  From here it's not visible that above is the only possible values.
> Maybe in the future you will have another mode.
> So, I suggest to leave comma here...
There won't be no further modes,...
i can still add the comma at all the places pointed.
>
>> +};
>> +enum intel_combo_mode {
>> +	PCIE0_PCIE1_MODE = 0,
>> +	PCIE_DL_MODE,
>> +	RXAUI_MODE,
>> +	XPCS0_XPCS1_MODE,
>> +	SATA0_SATA1_MODE
> ...and here...
>
>> +};
>> +
>> +enum aggregated_mode {
>> +	PHY_SL_MODE,
>> +	PHY_DL_MODE
> ...and here.
>
>> +};
> ...
>
>> +static int intel_cbphy_iphy_cfg(struct intel_cbphy_iphy *iphy,
>> +				int (*phy_cfg)(struct intel_cbphy_iphy *))
>> +{
>> +	struct intel_combo_phy *cbphy = iphy->parent;
>> +	struct intel_cbphy_iphy *sphy;
>> +	int ret;
>> +
>> +	ret = phy_cfg(iphy);
>> +	if (ret)
>> +		return ret;
>> +
>> +	if (cbphy->aggr_mode != PHY_DL_MODE)
>> +		return 0;
>> +
>> +	sphy = &cbphy->iphy[PHY_1];
> Do you really need temporary variable here?
Can be removed, i will update in the next patch.
>
>> +
>> +	return phy_cfg(sphy);
>> +}
> ...
>
>> +	if (!cbphy->init_cnt) {
> 	if (init_cnt)
> 		return 0;
>
> ?

Sure, will do the same.


Thanks,
Dilip

>> +		clk_disable_unprepare(cbphy->core_clk);
>> +		intel_cbphy_rst_assert(cbphy);
>> +	}
>> +
>> +	return 0;

Re: [PATCH v4 2/3] dt-bindings: phy: Add YAML schemas for Intel Combophy

[Dilip Kota]

On 3/3/2020 9:50 AM, Rob Herring wrote:
> On Mon, Mar 02, 2020 at 04:43:24PM +0800, Dilip Kota wrote:
>> Combophy subsystem provides PHY support to various
>> controllers, viz. PCIe, SATA and EMAC.
>> Adding YAML schemas for the same.
>>
>> Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
>> ---
>> Changes on v4:
>>    No changes.
...
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/phy/phy-intel-combophy.h>
>> +    combophy@d0a00000 {
>> +        compatible = "intel,combophy-lgm", "intel,combo-phy";
>> +        clocks = <&cgu0 1>;
>> +        reg = <0xd0a00000 0x40000>,
>> +              <0xd0a40000 0x1000>;
>> +        reg-names = "core", "app";
>> +        resets = <&rcu0 0x50 6>,
>> +                 <&rcu0 0x50 17>;
>> +        reset-names = "phy", "core";
>> +        intel,syscfg = <&sysconf 0>;
>> +        intel,hsio = <&hsiol 0>;
>> +        intel,phy-mode = <COMBO_PHY_PCIE>;
>> +
>> +        phy@0 {
> You need a 'reg' property to go with a unit-address.
>
> Really, I'd just simplify this to make parent 'resets' be 4 entries and
> put '#phy-cells = <1>;' in the parent. Then you don't need these child
> nodes.
If child nodes are not present, use case like PCIe controller-0 using 
phy@0 and PCIe controller-1 using phy@1 wont be possible.
>
>> +            compatible = "intel,phydev";
>> +            #phy-cells = <0>;
>> +            resets = <&rcu0 0x50 23>;
>> +        };
>> +
>> +        phy@1 {
>> +            compatible = "intel,phydev";
>> +            #phy-cells = <0>;
>> +            resets = <&rcu0 0x50 24>;
>> +        };
>> +    };
>> diff --git a/include/dt-bindings/phy/phy-intel-combophy.h b/include/dt-bindings/phy/phy-intel-combophy.h
>> new file mode 100644
>> index 000000000000..bd7f6377f4ef
>> --- /dev/null
>> +++ b/include/dt-bindings/phy/phy-intel-combophy.h
>> @@ -0,0 +1,10 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +
>> +#ifndef _DT_BINDINGS_INTEL_COMBOPHY
>> +#define _DT_BINDINGS_INTEL_COMBOPHY
>> +
>> +#define COMBO_PHY_PCIE	0
>> +#define COMBO_PHY_XPCS	1
>> +#define COMBO_PHY_SATA	2
> Use the PHY_TYPE_* defines we already have and extend as you need to.

Sure, will do the same.

Regards,
Dilip

>
>> +
>> +#endif /* _DT_BINDINGS_INTEL_COMBOPHY*/
>> -- 
>> 2.11.0
>>

Re: [PATCH v4 3/3] phy: intel: Add driver support for ComboPhy

[Andy Shevchenko]

On Tue, Mar 03, 2020 at 04:41:17PM +0800, Dilip Kota wrote:
> On 3/2/2020 7:19 PM, Andy Shevchenko wrote:
> > On Mon, Mar 02, 2020 at 04:43:25PM +0800, Dilip Kota wrote:
> > > ComboPhy subsystem provides PHYs for various
> > > controllers like PCIe, SATA and EMAC.
> > Thanks for an update, my (few minor) comments below.

...

> > > +enum intel_phy_mode {
> > > +	PHY_PCIE_MODE = 0,
> > > +	PHY_XPCS_MODE,
> > > +	PHY_SATA_MODE
> >  From here it's not visible that above is the only possible values.
> > Maybe in the future you will have another mode.
> > So, I suggest to leave comma here...
> There won't be no further modes,...

Again, this is not obvious from the naming scheme in use.
And how do you know the future?

> i can still add the comma at all the places pointed.

Just use a common sense.

> > > +};
> > > +enum intel_combo_mode {
> > > +	PCIE0_PCIE1_MODE = 0,
> > > +	PCIE_DL_MODE,
> > > +	RXAUI_MODE,
> > > +	XPCS0_XPCS1_MODE,
> > > +	SATA0_SATA1_MODE
> > ...and here...
> > 
> > > +};
> > > +
> > > +enum aggregated_mode {
> > > +	PHY_SL_MODE,
> > > +	PHY_DL_MODE
> > ...and here.
> > 
> > > +};

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v4 2/3] dt-bindings: phy: Add YAML schemas for Intel Combophy

[Rob Herring]

On Tue, Mar 3, 2020 at 3:24 AM Dilip Kota <eswara.kota@linux.intel.com> wrote:
>
>
> On 3/3/2020 9:50 AM, Rob Herring wrote:
> > On Mon, Mar 02, 2020 at 04:43:24PM +0800, Dilip Kota wrote:
> >> Combophy subsystem provides PHY support to various
> >> controllers, viz. PCIe, SATA and EMAC.
> >> Adding YAML schemas for the same.
> >>
> >> Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
> >> ---
> >> Changes on v4:
> >>    No changes.
> ...
> >> +additionalProperties: false
> >> +
> >> +examples:
> >> +  - |
> >> +    #include <dt-bindings/phy/phy-intel-combophy.h>
> >> +    combophy@d0a00000 {
> >> +        compatible = "intel,combophy-lgm", "intel,combo-phy";
> >> +        clocks = <&cgu0 1>;
> >> +        reg = <0xd0a00000 0x40000>,
> >> +              <0xd0a40000 0x1000>;
> >> +        reg-names = "core", "app";
> >> +        resets = <&rcu0 0x50 6>,
> >> +                 <&rcu0 0x50 17>;
> >> +        reset-names = "phy", "core";
> >> +        intel,syscfg = <&sysconf 0>;
> >> +        intel,hsio = <&hsiol 0>;
> >> +        intel,phy-mode = <COMBO_PHY_PCIE>;
> >> +
> >> +        phy@0 {
> > You need a 'reg' property to go with a unit-address.
> >
> > Really, I'd just simplify this to make parent 'resets' be 4 entries and
> > put '#phy-cells = <1>;' in the parent. Then you don't need these child
> > nodes.
> If child nodes are not present, use case like PCIe controller-0 using
> phy@0 and PCIe controller-1 using phy@1 wont be possible.

Yes, it will be.

For controller-0:
phys = <&phy 0>;

For controller-1:
phys = <&phy 1>;

Rob

Re: [PATCH v4 2/3] dt-bindings: phy: Add YAML schemas for Intel Combophy

[Dilip Kota]

On 3/4/2020 12:26 AM, Rob Herring wrote:
> On Tue, Mar 3, 2020 at 3:24 AM Dilip Kota <eswara.kota@linux.intel.com> wrote:
>>
>> On 3/3/2020 9:50 AM, Rob Herring wrote:
>>> On Mon, Mar 02, 2020 at 04:43:24PM +0800, Dilip Kota wrote:
>>>> Combophy subsystem provides PHY support to various
>>>> controllers, viz. PCIe, SATA and EMAC.
>>>> Adding YAML schemas for the same.
>>>>
>>>> Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
>>>> ---
>>>> Changes on v4:
>>>>     No changes.
>> ...
>>>> +additionalProperties: false
>>>> +
>>>> +examples:
>>>> +  - |
>>>> +    #include <dt-bindings/phy/phy-intel-combophy.h>
>>>> +    combophy@d0a00000 {
>>>> +        compatible = "intel,combophy-lgm", "intel,combo-phy";
>>>> +        clocks = <&cgu0 1>;
>>>> +        reg = <0xd0a00000 0x40000>,
>>>> +              <0xd0a40000 0x1000>;
>>>> +        reg-names = "core", "app";
>>>> +        resets = <&rcu0 0x50 6>,
>>>> +                 <&rcu0 0x50 17>;
>>>> +        reset-names = "phy", "core";
>>>> +        intel,syscfg = <&sysconf 0>;
>>>> +        intel,hsio = <&hsiol 0>;
>>>> +        intel,phy-mode = <COMBO_PHY_PCIE>;
>>>> +
>>>> +        phy@0 {
>>> You need a 'reg' property to go with a unit-address.
>>>
>>> Really, I'd just simplify this to make parent 'resets' be 4 entries and
>>> put '#phy-cells = <1>;' in the parent. Then you don't need these child
>>> nodes.
>> If child nodes are not present, use case like PCIe controller-0 using
>> phy@0 and PCIe controller-1 using phy@1 wont be possible.
> Yes, it will be.
>
> For controller-0:
> phys = <&phy 0>;
>
> For controller-1:
> phys = <&phy 1>;

OH got it, arg cell can be utilized for PHY id.
I started working on your suggestion in simplifying it, but below point 
is haunting while doing the changes. So felt to check with you whether 
the better one is going with existing DT node or the one without child 
nodes!.
      Existing DT node skeleton, replicates hardware design ComboPhy 
with 2 PHYs. (ComboPhy as parent node and 2PHYs as child nodes)

Regards,
Dilip

>
> Rob

Re: [PATCH v4 2/3] dt-bindings: phy: Add YAML schemas for Intel Combophy

[Dilip Kota]

Hi Rob,

On 3/4/2020 5:16 PM, Dilip Kota wrote:
>
> On 3/4/2020 12:26 AM, Rob Herring wrote:
>> On Tue, Mar 3, 2020 at 3:24 AM Dilip Kota 
>> <eswara.kota@linux.intel.com> wrote:
>>>
>>> On 3/3/2020 9:50 AM, Rob Herring wrote:
>>>> On Mon, Mar 02, 2020 at 04:43:24PM +0800, Dilip Kota wrote:
>>>>> Combophy subsystem provides PHY support to various
>>>>> controllers, viz. PCIe, SATA and EMAC.
>>>>> Adding YAML schemas for the same.
...
>>>>> +  - |
>>>>> +    #include <dt-bindings/phy/phy-intel-combophy.h>
>>>>> +    combophy@d0a00000 {
>>>>> +        compatible = "intel,combophy-lgm", "intel,combo-phy";
>>>>> +        clocks = <&cgu0 1>;
>>>>> +        reg = <0xd0a00000 0x40000>,
>>>>> +              <0xd0a40000 0x1000>;
>>>>> +        reg-names = "core", "app";
>>>>> +        resets = <&rcu0 0x50 6>,
>>>>> +                 <&rcu0 0x50 17>;
>>>>> +        reset-names = "phy", "core";
>>>>> +        intel,syscfg = <&sysconf 0>;
>>>>> +        intel,hsio = <&hsiol 0>;
>>>>> +        intel,phy-mode = <COMBO_PHY_PCIE>;
>>>>> +
>>>>> +        phy@0 {
>>>> You need a 'reg' property to go with a unit-address.
>>>>
>>>> Really, I'd just simplify this to make parent 'resets' be 4 entries 
>>>> and
>>>> put '#phy-cells = <1>;' in the parent. Then you don't need these child
>>>> nodes.
>>> If child nodes are not present, use case like PCIe controller-0 using
>>> phy@0 and PCIe controller-1 using phy@1 wont be possible.
>> Yes, it will be.
>>
>> For controller-0:
>> phys = <&phy 0>;
>>
>> For controller-1:
>> phys = <&phy 1>;
>
> OH got it, arg cell can be utilized for PHY id.
> I started working on your suggestion in simplifying it, but below 
> point is haunting while doing the changes. So felt to check with you 
> whether the better one is going with existing DT node or the one 
> without child nodes!.
>      Existing DT node skeleton, replicates hardware design ComboPhy 
> with 2 PHYs. (ComboPhy as parent node and 2PHYs as child nodes)
In the patchwork, i see the patch state is 'Change Requested', so felt 
to keep a remainder mail for your inputs on above query.
I have waiting to push the appropriate code changes based on your comment.

Thanks,
Dilip

>
> Regards,
> Dilip
>
>>
>> Rob