[PATCH v3 0/4] Add support for Freebox fbx8am boards

[PATCH v3 0/4] Add support for Freebox fbx8am boards

[Marc Gonzalez]

Add support for Freebox fbx8am boards

v3:
- order board binding alphabetically (Conor D)
- replace underscores with dashes in DT node names (Krzysztof K)
- Merge overlays in the build for coverage (Rob H)

Marc Gonzalez (2):
  dt-bindings: vendor-prefixes: add freebox
  dt-bindings: arm: amlogic: add fbx8am binding

Pierre-Hugues Husson (2):
  arm64: dts: amlogic: add fbx8am board
  arm64: dts: amlogic: add fbx8am DT overlays

 Documentation/devicetree/bindings/arm/amlogic.yaml         |   1 +
 Documentation/devicetree/bindings/vendor-prefixes.yaml     |   2 +
 arch/arm64/boot/dts/amlogic/Makefile                       |   6 +
 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso    |  35 +++
 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso |  25 ++
 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts          | 462 +++++++++++++++++++++++++++++++++
 6 files changed, 531 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts

-- 
2.34.1

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v3 0/4] Add support for Freebox fbx8am boards

[Marc Gonzalez]

Add support for Freebox fbx8am boards

v3:
- order board binding alphabetically (Conor D)
- replace underscores with dashes in DT node names (Krzysztof K)
- Merge overlays in the build for coverage (Rob H)

Marc Gonzalez (2):
  dt-bindings: vendor-prefixes: add freebox
  dt-bindings: arm: amlogic: add fbx8am binding

Pierre-Hugues Husson (2):
  arm64: dts: amlogic: add fbx8am board
  arm64: dts: amlogic: add fbx8am DT overlays

 Documentation/devicetree/bindings/arm/amlogic.yaml         |   1 +
 Documentation/devicetree/bindings/vendor-prefixes.yaml     |   2 +
 arch/arm64/boot/dts/amlogic/Makefile                       |   6 +
 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso    |  35 +++
 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso |  25 ++
 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts          | 462 +++++++++++++++++++++++++++++++++
 6 files changed, 531 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts

-- 
2.34.1

[PATCH v3 1/4] dt-bindings: vendor-prefixes: add freebox

[Marc Gonzalez]

Freebox is a French ISP who makes gateways and STBs.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 1a0dc04f1db47..4f5a1f4e6689a 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -500,6 +500,8 @@ patternProperties:
     description: FocalTech Systems Co.,Ltd
   "^forlinx,.*":
     description: Baoding Forlinx Embedded Technology Co., Ltd.
+  "^freebox,.*":
+    description: Freebox SAS
   "^freecom,.*":
     description: Freecom Gmbh
   "^frida,.*":
-- 
2.34.1



_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v3 1/4] dt-bindings: vendor-prefixes: add freebox

[Marc Gonzalez]

Freebox is a French ISP who makes gateways and STBs.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 1a0dc04f1db47..4f5a1f4e6689a 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -500,6 +500,8 @@ patternProperties:
     description: FocalTech Systems Co.,Ltd
   "^forlinx,.*":
     description: Baoding Forlinx Embedded Technology Co., Ltd.
+  "^freebox,.*":
+    description: Freebox SAS
   "^freecom,.*":
     description: Freecom Gmbh
   "^frida,.*":
-- 
2.34.1

[PATCH v3 2/4] dt-bindings: arm: amlogic: add fbx8am binding

[Marc Gonzalez]

Add binding for the Amlogic Meson G12A-based Freebox Pop (fbx8am).

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
---
 Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index caab7ceeda45a..ce0ea36de0c09 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -146,6 +146,7 @@ properties:
           - enum:
               - amediatech,x96-max
               - amlogic,u200
+              - freebox,fbx8am
               - radxa,zero
               - seirobotics,sei510
           - const: amlogic,g12a
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v3 2/4] dt-bindings: arm: amlogic: add fbx8am binding

[Marc Gonzalez]

Add binding for the Amlogic Meson G12A-based Freebox Pop (fbx8am).

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
---
 Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index caab7ceeda45a..ce0ea36de0c09 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -146,6 +146,7 @@ properties:
           - enum:
               - amediatech,x96-max
               - amlogic,u200
+              - freebox,fbx8am
               - radxa,zero
               - seirobotics,sei510
           - const: amlogic,g12a
-- 
2.34.1

[PATCH v3 3/4] arm64: dts: amlogic: add fbx8am board

[Marc Gonzalez]

From: Pierre-Hugues Husson <phhusson@freebox.fr>

The fbx8am boards are based on the Amlogic Meson G12A S905X2 SoC,
and the SEI510 board design.

Signed-off-by: Pierre-Hugues Husson <phhusson@freebox.fr>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
---
 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts | 462 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 462 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
new file mode 100644
index 0000000000000..af211d8f39520
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
@@ -0,0 +1,462 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2024 Freebox SAS
+
+/*
+ * SEI codename: SEI530FB (based on SEI510)
+ * Freebox codename: fbx8am
+ * Commercial names: Freebox Pop, Player TV Free 4K
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "freebox,fbx8am", "amlogic,g12a";
+	model = "Freebox Player Pop";
+	chassis-type = "embedded";
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		/* Physical user-accessible reset button near USB port */
+		power-button {
+			label = "Reset";
+			linux,code = <BTN_MISC>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	spdif_dit: audio-codec-2 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ao_5v: regulator-ao-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc-in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddao_3v3_t: regulator-vddao-3v3-t {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3_T";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * SY8120B1ABC DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&ao_5v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_ao1v8: regulator-vddio-ao1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <10>; /* required for 43752 */
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "fbx8am";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* spdif hdmi or toslink interface */
+		dai-link-4 {
+			sound-dai = <&spdifout_a>;
+
+			codec-0 {
+			sound-dai = <&spdif_dit>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
+			};
+		};
+
+		/* spdif hdmi interface */
+		dai-link-5 {
+			sound-dai = <&spdifout_b>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-6 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&spdifout_a {
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout_b {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&pdm {
+	pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>,
+		    <&pdm_din2_z_pins>, <&pdm_din3_z_pins>,
+		    <&pdm_dclk_z_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_ao1v8>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v3 3/4] arm64: dts: amlogic: add fbx8am board

[Marc Gonzalez]

From: Pierre-Hugues Husson <phhusson@freebox.fr>

The fbx8am boards are based on the Amlogic Meson G12A S905X2 SoC,
and the SEI510 board design.

Signed-off-by: Pierre-Hugues Husson <phhusson@freebox.fr>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
---
 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts | 462 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 462 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
new file mode 100644
index 0000000000000..af211d8f39520
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
@@ -0,0 +1,462 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2024 Freebox SAS
+
+/*
+ * SEI codename: SEI530FB (based on SEI510)
+ * Freebox codename: fbx8am
+ * Commercial names: Freebox Pop, Player TV Free 4K
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "freebox,fbx8am", "amlogic,g12a";
+	model = "Freebox Player Pop";
+	chassis-type = "embedded";
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		/* Physical user-accessible reset button near USB port */
+		power-button {
+			label = "Reset";
+			linux,code = <BTN_MISC>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	spdif_dit: audio-codec-2 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ao_5v: regulator-ao-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc-in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddao_3v3_t: regulator-vddao-3v3-t {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3_T";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * SY8120B1ABC DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&ao_5v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_ao1v8: regulator-vddio-ao1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <10>; /* required for 43752 */
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "fbx8am";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* spdif hdmi or toslink interface */
+		dai-link-4 {
+			sound-dai = <&spdifout_a>;
+
+			codec-0 {
+			sound-dai = <&spdif_dit>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
+			};
+		};
+
+		/* spdif hdmi interface */
+		dai-link-5 {
+			sound-dai = <&spdifout_b>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-6 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&spdifout_a {
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout_b {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&pdm {
+	pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>,
+		    <&pdm_din2_z_pins>, <&pdm_din3_z_pins>,
+		    <&pdm_dclk_z_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_ao1v8>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
-- 
2.34.1

[PATCH v3 4/4] arm64: dts: amlogic: add fbx8am DT overlays

[Marc Gonzalez]

From: Pierre-Hugues Husson <phhusson@freebox.fr>

Add support for two variants of the fbx8am board.

Signed-off-by: Pierre-Hugues Husson <phhusson@freebox.fr>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
---
 arch/arm64/boot/dts/amlogic/Makefile                       |  6 ++++++
 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso    | 35 ++++++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso | 25 ++++++++++++++++++++++++
 3 files changed, 66 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index cc8b34bd583d8..1ab160bf928ae 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -8,6 +8,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-3.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-brcm.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-realtek.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
@@ -80,3 +82,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
+
+# Overlays
+meson-g12a-fbx8am-brcm-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-brcm.dtbo
+meson-g12a-fbx8am-realtek-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-realtek.dtbo
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
new file mode 100644
index 0000000000000..ed79809b15859
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2024 Freebox SAS
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+/ {
+	compatible = "freebox,fbx8am-brcm", "freebox,fbx8am", "amlogic,g12a";
+};
+
+&uart_A {
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+		vbat-supply = <&vddao_3v3>;
+		vddio-supply = <&vddio_ao1v8>;
+	};
+};
+
+&sd_emmc_a {
+	/* Per mmc-controller.yaml */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	/* NB: may be either AP6398S or AP6398SR3 wifi module */
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
new file mode 100644
index 0000000000000..5da88fb94fb98
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2024 Freebox SAS
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+/ {
+	compatible = "freebox,fbx8am-realtek", "freebox,fbx8am", "amlogic,g12a";
+};
+
+&uart_A {
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&sd_emmc_a {
+	/* No explicit compatible for rtl8822cs sdio */
+};
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v3 4/4] arm64: dts: amlogic: add fbx8am DT overlays

[Marc Gonzalez]

From: Pierre-Hugues Husson <phhusson@freebox.fr>

Add support for two variants of the fbx8am board.

Signed-off-by: Pierre-Hugues Husson <phhusson@freebox.fr>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
---
 arch/arm64/boot/dts/amlogic/Makefile                       |  6 ++++++
 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso    | 35 ++++++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso | 25 ++++++++++++++++++++++++
 3 files changed, 66 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index cc8b34bd583d8..1ab160bf928ae 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -8,6 +8,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-3.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-brcm.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-realtek.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
@@ -80,3 +82,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
+
+# Overlays
+meson-g12a-fbx8am-brcm-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-brcm.dtbo
+meson-g12a-fbx8am-realtek-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-realtek.dtbo
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
new file mode 100644
index 0000000000000..ed79809b15859
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2024 Freebox SAS
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+/ {
+	compatible = "freebox,fbx8am-brcm", "freebox,fbx8am", "amlogic,g12a";
+};
+
+&uart_A {
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+		vbat-supply = <&vddao_3v3>;
+		vddio-supply = <&vddio_ao1v8>;
+	};
+};
+
+&sd_emmc_a {
+	/* Per mmc-controller.yaml */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	/* NB: may be either AP6398S or AP6398SR3 wifi module */
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
new file mode 100644
index 0000000000000..5da88fb94fb98
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2024 Freebox SAS
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+/ {
+	compatible = "freebox,fbx8am-realtek", "freebox,fbx8am", "amlogic,g12a";
+};
+
+&uart_A {
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&sd_emmc_a {
+	/* No explicit compatible for rtl8822cs sdio */
+};
-- 
2.34.1

Re: [PATCH v3 3/4] arm64: dts: amlogic: add fbx8am board

[Neil Armstrong]

On 13/02/2024 18:13, Marc Gonzalez wrote:
> From: Pierre-Hugues Husson <phhusson@freebox.fr>
> 
> The fbx8am boards are based on the Amlogic Meson G12A S905X2 SoC,
> and the SEI510 board design.
> 
> Signed-off-by: Pierre-Hugues Husson <phhusson@freebox.fr>
> Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
> ---
>   arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts | 462 ++++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 462 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
> new file mode 100644
> index 0000000000000..af211d8f39520
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
> @@ -0,0 +1,462 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +// Copyright (c) 2024 Freebox SAS
> +
> +/*
> + * SEI codename: SEI530FB (based on SEI510)
> + * Freebox codename: fbx8am
> + * Commercial names: Freebox Pop, Player TV Free 4K
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-g12a.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/gpio/meson-g12a-gpio.h>
> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
> +
> +/ {
> +	compatible = "freebox,fbx8am", "amlogic,g12a";
> +	model = "Freebox Player Pop";
> +	chassis-type = "embedded";
> +
> +	firmware {
> +		optee {
> +			compatible = "linaro,optee-tz";
> +			method = "smc";
> +		};
> +	};
> +
> +	gpio-keys-polled {
> +		compatible = "gpio-keys-polled";
> +		poll-interval = <100>;
> +
> +		/* Physical user-accessible reset button near USB port */
> +		power-button {
> +			label = "Reset";
> +			linux,code = <BTN_MISC>;
> +			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
> +		};
> +	};
> +
> +	spdif_dit: audio-codec-2 {
> +		#sound-dai-cells = <0>;
> +		compatible = "linux,spdif-dit";
> +		status = "okay";
> +		sound-name-prefix = "DIT";
> +	};
> +
> +	aliases {
> +		serial0 = &uart_AO;
> +		ethernet0 = &ethmac;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	emmc_pwrseq: emmc-pwrseq {
> +		compatible = "mmc-pwrseq-emmc";
> +		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
> +	};
> +
> +	hdmi-connector {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi_connector_in: endpoint {
> +				remote-endpoint = <&hdmi_tx_tmds_out>;
> +			};
> +		};
> +	};
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x0 0x0 0x0 0x80000000>;
> +	};
> +
> +	ao_5v: regulator-ao-5v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "AO_5V";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&dc_in>;
> +		regulator-always-on;
> +	};
> +
> +	dc_in: regulator-dc-in {
> +		compatible = "regulator-fixed";
> +		regulator-name = "DC_IN";
> +		regulator-min-microvolt = <12000000>;
> +		regulator-max-microvolt = <12000000>;
> +		regulator-always-on;
> +	};
> +
> +	emmc_1v8: regulator-emmc-1v8 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "EMMC_1V8";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		vin-supply = <&vddao_3v3>;
> +		regulator-always-on;
> +	};
> +
> +	vddao_3v3: regulator-vddao-3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VDDAO_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&ao_5v>;
> +		regulator-always-on;
> +	};
> +
> +	vddao_3v3_t: regulator-vddao-3v3-t {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VDDAO_3V3_T";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vddao_3v3>;
> +		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
> +		enable-active-high;
> +	};
> +
> +	vddcpu: regulator-vddcpu {
> +		/*
> +		 * SY8120B1ABC DC/DC Regulator.
> +		 */
> +		compatible = "pwm-regulator";
> +
> +		regulator-name = "VDDCPU";
> +		regulator-min-microvolt = <721000>;
> +		regulator-max-microvolt = <1022000>;
> +
> +		pwm-supply = <&ao_5v>;
> +
> +		pwms = <&pwm_AO_cd 1 1250 0>;
> +		pwm-dutycycle-range = <100 0>;
> +
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
> +
> +	vddio_ao1v8: regulator-vddio-ao1v8 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VDDIO_AO1V8";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		vin-supply = <&vddao_3v3>;
> +		regulator-always-on;
> +	};
> +
> +	sdio_pwrseq: sdio-pwrseq {
> +		compatible = "mmc-pwrseq-simple";
> +		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
> +		post-power-on-delay-ms = <10>; /* required for 43752 */
> +		clocks = <&wifi32k>;
> +		clock-names = "ext_clock";
> +	};
> +
> +	wifi32k: wifi32k {
> +		compatible = "pwm-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <32768>;
> +		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
> +	};
> +
> +	sound {
> +		compatible = "amlogic,axg-sound-card";
> +		model = "fbx8am";
> +		audio-aux-devs = <&tdmout_b>;
> +		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
> +				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
> +				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
> +				"TDM_B Playback", "TDMOUT_B OUT",
> +				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
> +				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
> +				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
> +
> +		assigned-clocks = <&clkc CLKID_MPLL2>,
> +				  <&clkc CLKID_MPLL0>,
> +				  <&clkc CLKID_MPLL1>;
> +		assigned-clock-parents = <0>, <0>, <0>;
> +		assigned-clock-rates = <294912000>,
> +				       <270950400>,
> +				       <393216000>;
> +
> +		dai-link-0 {
> +			sound-dai = <&frddr_a>;
> +		};
> +
> +		dai-link-1 {
> +			sound-dai = <&frddr_b>;
> +		};
> +
> +		dai-link-2 {
> +			sound-dai = <&frddr_c>;
> +		};
> +
> +		/* 8ch hdmi interface */
> +		dai-link-3 {
> +			sound-dai = <&tdmif_b>;
> +			dai-format = "i2s";
> +			dai-tdm-slot-tx-mask-0 = <1 1>;
> +			dai-tdm-slot-tx-mask-1 = <1 1>;
> +			dai-tdm-slot-tx-mask-2 = <1 1>;
> +			dai-tdm-slot-tx-mask-3 = <1 1>;
> +			mclk-fs = <256>;
> +
> +			codec {
> +				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
> +			};
> +		};
> +
> +		/* spdif hdmi or toslink interface */
> +		dai-link-4 {
> +			sound-dai = <&spdifout_a>;
> +
> +			codec-0 {
> +			sound-dai = <&spdif_dit>;
> +			};
> +
> +			codec-1 {
> +				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
> +			};
> +		};
> +
> +		/* spdif hdmi interface */
> +		dai-link-5 {
> +			sound-dai = <&spdifout_b>;
> +
> +			codec {
> +				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
> +			};
> +		};
> +
> +		/* hdmi glue */
> +		dai-link-6 {
> +			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
> +
> +			codec {
> +				sound-dai = <&hdmi_tx>;
> +			};
> +		};
> +	};
> +};
> +
> +&arb {
> +	status = "okay";
> +};
> +
> +&cecb_AO {
> +	pinctrl-0 = <&cec_ao_b_h_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +	hdmi-phandle = <&hdmi_tx>;
> +};
> +
> +&clkc_audio {
> +	status = "okay";
> +};
> +
> +&cpu0 {
> +	cpu-supply = <&vddcpu>;
> +	operating-points-v2 = <&cpu_opp_table>;
> +	clocks = <&clkc CLKID_CPU_CLK>;
> +	clock-latency = <50000>;
> +};
> +
> +&cpu1 {
> +	cpu-supply = <&vddcpu>;
> +	operating-points-v2 = <&cpu_opp_table>;
> +	clocks = <&clkc CLKID_CPU_CLK>;
> +	clock-latency = <50000>;
> +};
> +
> +&cpu2 {
> +	cpu-supply = <&vddcpu>;
> +	operating-points-v2 = <&cpu_opp_table>;
> +	clocks = <&clkc CLKID_CPU_CLK>;
> +	clock-latency = <50000>;
> +};
> +
> +&cpu3 {
> +	cpu-supply = <&vddcpu>;
> +	operating-points-v2 = <&cpu_opp_table>;
> +	clocks = <&clkc CLKID_CPU_CLK>;
> +	clock-latency = <50000>;
> +};
> +
> +&ethmac {
> +	status = "okay";
> +	phy-handle = <&internal_ephy>;
> +	phy-mode = "rmii";
> +};
> +
> +&frddr_a {
> +	status = "okay";
> +};
> +
> +&frddr_b {
> +	status = "okay";
> +};
> +
> +&frddr_c {
> +	status = "okay";
> +};
> +
> +&spdifout_a {
> +	pinctrl-0 = <&spdif_out_h_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
> +&spdifout_b {
> +	status = "okay";
> +};
> +
> +&hdmi_tx {
> +	status = "okay";
> +	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
> +	pinctrl-names = "default";
> +};
> +
> +&hdmi_tx_tmds_port {
> +	hdmi_tx_tmds_out: endpoint {
> +		remote-endpoint = <&hdmi_connector_in>;
> +	};
> +};
> +
> +&i2c3 {
> +	status = "okay";
> +	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
> +	pinctrl-names = "default";
> +};
> +
> +&ir {
> +	status = "okay";
> +	pinctrl-0 = <&remote_input_ao_pins>;
> +	pinctrl-names = "default";
> +};
> +
> +&pwm_AO_cd {
> +	pinctrl-0 = <&pwm_ao_d_e_pins>;
> +	pinctrl-names = "default";
> +	clocks = <&xtal>;
> +	clock-names = "clkin1";
> +	status = "okay";
> +};
> +
> +&pwm_ef {
> +	status = "okay";
> +	pinctrl-0 = <&pwm_e_pins>;
> +	pinctrl-names = "default";
> +	clocks = <&xtal>;
> +	clock-names = "clkin0";
> +};
> +
> +&pdm {
> +	pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>,
> +		    <&pdm_din2_z_pins>, <&pdm_din3_z_pins>,
> +		    <&pdm_dclk_z_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
> +&saradc {
> +	status = "okay";
> +	vref-supply = <&vddio_ao1v8>;
> +};
> +
> +/* SDIO */
> +&sd_emmc_a {
> +	status = "okay";
> +	pinctrl-0 = <&sdio_pins>;
> +	pinctrl-1 = <&sdio_clk_gate_pins>;
> +	pinctrl-names = "default", "clk-gate";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	bus-width = <4>;
> +	cap-sd-highspeed;
> +	sd-uhs-sdr50;
> +	max-frequency = <100000000>;
> +
> +	non-removable;
> +	disable-wp;
> +
> +	/* WiFi firmware requires power to be kept while in suspend */
> +	keep-power-in-suspend;
> +
> +	mmc-pwrseq = <&sdio_pwrseq>;
> +
> +	vmmc-supply = <&vddao_3v3>;
> +	vqmmc-supply = <&vddio_ao1v8>;
> +};
> +
> +/* SD card */
> +&sd_emmc_b {
> +	status = "okay";
> +	pinctrl-0 = <&sdcard_c_pins>;
> +	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
> +	pinctrl-names = "default", "clk-gate";
> +
> +	bus-width = <4>;
> +	cap-sd-highspeed;
> +	max-frequency = <50000000>;
> +	disable-wp;
> +
> +	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
> +	vmmc-supply = <&vddao_3v3>;
> +	vqmmc-supply = <&vddao_3v3>;
> +};
> +
> +/* eMMC */
> +&sd_emmc_c {
> +	status = "okay";
> +	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
> +	pinctrl-1 = <&emmc_clk_gate_pins>;
> +	pinctrl-names = "default", "clk-gate";
> +
> +	bus-width = <8>;
> +	cap-mmc-highspeed;
> +	mmc-ddr-1_8v;
> +	mmc-hs200-1_8v;
> +	max-frequency = <200000000>;
> +	non-removable;
> +	disable-wp;
> +
> +	mmc-pwrseq = <&emmc_pwrseq>;
> +	vmmc-supply = <&vddao_3v3>;
> +	vqmmc-supply = <&emmc_1v8>;
> +};
> +
> +&tdmif_b {
> +	status = "okay";
> +};
> +
> +&tdmout_b {
> +	status = "okay";
> +};
> +
> +&tohdmitx {
> +	status = "okay";
> +};
> +
> +&uart_A {
> +	status = "okay";
> +	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> +	pinctrl-names = "default";
> +	uart-has-rtscts;
> +};
> +
> +&uart_AO {
> +	status = "okay";
> +	pinctrl-0 = <&uart_ao_a_pins>;
> +	pinctrl-names = "default";
> +};
> +
> +&usb {
> +	status = "okay";
> +	dr_mode = "host";
> +};

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v3 3/4] arm64: dts: amlogic: add fbx8am board

[Neil Armstrong]

On 13/02/2024 18:13, Marc Gonzalez wrote:
> From: Pierre-Hugues Husson <phhusson@freebox.fr>
> 
> The fbx8am boards are based on the Amlogic Meson G12A S905X2 SoC,
> and the SEI510 board design.
> 
> Signed-off-by: Pierre-Hugues Husson <phhusson@freebox.fr>
> Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
> ---
>   arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts | 462 ++++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 462 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
> new file mode 100644
> index 0000000000000..af211d8f39520
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
> @@ -0,0 +1,462 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +// Copyright (c) 2024 Freebox SAS
> +
> +/*
> + * SEI codename: SEI530FB (based on SEI510)
> + * Freebox codename: fbx8am
> + * Commercial names: Freebox Pop, Player TV Free 4K
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-g12a.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/gpio/meson-g12a-gpio.h>
> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
> +
> +/ {
> +	compatible = "freebox,fbx8am", "amlogic,g12a";
> +	model = "Freebox Player Pop";
> +	chassis-type = "embedded";
> +
> +	firmware {
> +		optee {
> +			compatible = "linaro,optee-tz";
> +			method = "smc";
> +		};
> +	};
> +
> +	gpio-keys-polled {
> +		compatible = "gpio-keys-polled";
> +		poll-interval = <100>;
> +
> +		/* Physical user-accessible reset button near USB port */
> +		power-button {
> +			label = "Reset";
> +			linux,code = <BTN_MISC>;
> +			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
> +		};
> +	};
> +
> +	spdif_dit: audio-codec-2 {
> +		#sound-dai-cells = <0>;
> +		compatible = "linux,spdif-dit";
> +		status = "okay";
> +		sound-name-prefix = "DIT";
> +	};
> +
> +	aliases {
> +		serial0 = &uart_AO;
> +		ethernet0 = &ethmac;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	emmc_pwrseq: emmc-pwrseq {
> +		compatible = "mmc-pwrseq-emmc";
> +		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
> +	};
> +
> +	hdmi-connector {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi_connector_in: endpoint {
> +				remote-endpoint = <&hdmi_tx_tmds_out>;
> +			};
> +		};
> +	};
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x0 0x0 0x0 0x80000000>;
> +	};
> +
> +	ao_5v: regulator-ao-5v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "AO_5V";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&dc_in>;
> +		regulator-always-on;
> +	};
> +
> +	dc_in: regulator-dc-in {
> +		compatible = "regulator-fixed";
> +		regulator-name = "DC_IN";
> +		regulator-min-microvolt = <12000000>;
> +		regulator-max-microvolt = <12000000>;
> +		regulator-always-on;
> +	};
> +
> +	emmc_1v8: regulator-emmc-1v8 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "EMMC_1V8";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		vin-supply = <&vddao_3v3>;
> +		regulator-always-on;
> +	};
> +
> +	vddao_3v3: regulator-vddao-3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VDDAO_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&ao_5v>;
> +		regulator-always-on;
> +	};
> +
> +	vddao_3v3_t: regulator-vddao-3v3-t {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VDDAO_3V3_T";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vddao_3v3>;
> +		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
> +		enable-active-high;
> +	};
> +
> +	vddcpu: regulator-vddcpu {
> +		/*
> +		 * SY8120B1ABC DC/DC Regulator.
> +		 */
> +		compatible = "pwm-regulator";
> +
> +		regulator-name = "VDDCPU";
> +		regulator-min-microvolt = <721000>;
> +		regulator-max-microvolt = <1022000>;
> +
> +		pwm-supply = <&ao_5v>;
> +
> +		pwms = <&pwm_AO_cd 1 1250 0>;
> +		pwm-dutycycle-range = <100 0>;
> +
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
> +
> +	vddio_ao1v8: regulator-vddio-ao1v8 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VDDIO_AO1V8";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		vin-supply = <&vddao_3v3>;
> +		regulator-always-on;
> +	};
> +
> +	sdio_pwrseq: sdio-pwrseq {
> +		compatible = "mmc-pwrseq-simple";
> +		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
> +		post-power-on-delay-ms = <10>; /* required for 43752 */
> +		clocks = <&wifi32k>;
> +		clock-names = "ext_clock";
> +	};
> +
> +	wifi32k: wifi32k {
> +		compatible = "pwm-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <32768>;
> +		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
> +	};
> +
> +	sound {
> +		compatible = "amlogic,axg-sound-card";
> +		model = "fbx8am";
> +		audio-aux-devs = <&tdmout_b>;
> +		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
> +				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
> +				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
> +				"TDM_B Playback", "TDMOUT_B OUT",
> +				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
> +				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
> +				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
> +
> +		assigned-clocks = <&clkc CLKID_MPLL2>,
> +				  <&clkc CLKID_MPLL0>,
> +				  <&clkc CLKID_MPLL1>;
> +		assigned-clock-parents = <0>, <0>, <0>;
> +		assigned-clock-rates = <294912000>,
> +				       <270950400>,
> +				       <393216000>;
> +
> +		dai-link-0 {
> +			sound-dai = <&frddr_a>;
> +		};
> +
> +		dai-link-1 {
> +			sound-dai = <&frddr_b>;
> +		};
> +
> +		dai-link-2 {
> +			sound-dai = <&frddr_c>;
> +		};
> +
> +		/* 8ch hdmi interface */
> +		dai-link-3 {
> +			sound-dai = <&tdmif_b>;
> +			dai-format = "i2s";
> +			dai-tdm-slot-tx-mask-0 = <1 1>;
> +			dai-tdm-slot-tx-mask-1 = <1 1>;
> +			dai-tdm-slot-tx-mask-2 = <1 1>;
> +			dai-tdm-slot-tx-mask-3 = <1 1>;
> +			mclk-fs = <256>;
> +
> +			codec {
> +				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
> +			};
> +		};
> +
> +		/* spdif hdmi or toslink interface */
> +		dai-link-4 {
> +			sound-dai = <&spdifout_a>;
> +
> +			codec-0 {
> +			sound-dai = <&spdif_dit>;
> +			};
> +
> +			codec-1 {
> +				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
> +			};
> +		};
> +
> +		/* spdif hdmi interface */
> +		dai-link-5 {
> +			sound-dai = <&spdifout_b>;
> +
> +			codec {
> +				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
> +			};
> +		};
> +
> +		/* hdmi glue */
> +		dai-link-6 {
> +			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
> +
> +			codec {
> +				sound-dai = <&hdmi_tx>;
> +			};
> +		};
> +	};
> +};
> +
> +&arb {
> +	status = "okay";
> +};
> +
> +&cecb_AO {
> +	pinctrl-0 = <&cec_ao_b_h_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +	hdmi-phandle = <&hdmi_tx>;
> +};
> +
> +&clkc_audio {
> +	status = "okay";
> +};
> +
> +&cpu0 {
> +	cpu-supply = <&vddcpu>;
> +	operating-points-v2 = <&cpu_opp_table>;
> +	clocks = <&clkc CLKID_CPU_CLK>;
> +	clock-latency = <50000>;
> +};
> +
> +&cpu1 {
> +	cpu-supply = <&vddcpu>;
> +	operating-points-v2 = <&cpu_opp_table>;
> +	clocks = <&clkc CLKID_CPU_CLK>;
> +	clock-latency = <50000>;
> +};
> +
> +&cpu2 {
> +	cpu-supply = <&vddcpu>;
> +	operating-points-v2 = <&cpu_opp_table>;
> +	clocks = <&clkc CLKID_CPU_CLK>;
> +	clock-latency = <50000>;
> +};
> +
> +&cpu3 {
> +	cpu-supply = <&vddcpu>;
> +	operating-points-v2 = <&cpu_opp_table>;
> +	clocks = <&clkc CLKID_CPU_CLK>;
> +	clock-latency = <50000>;
> +};
> +
> +&ethmac {
> +	status = "okay";
> +	phy-handle = <&internal_ephy>;
> +	phy-mode = "rmii";
> +};
> +
> +&frddr_a {
> +	status = "okay";
> +};
> +
> +&frddr_b {
> +	status = "okay";
> +};
> +
> +&frddr_c {
> +	status = "okay";
> +};
> +
> +&spdifout_a {
> +	pinctrl-0 = <&spdif_out_h_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
> +&spdifout_b {
> +	status = "okay";
> +};
> +
> +&hdmi_tx {
> +	status = "okay";
> +	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
> +	pinctrl-names = "default";
> +};
> +
> +&hdmi_tx_tmds_port {
> +	hdmi_tx_tmds_out: endpoint {
> +		remote-endpoint = <&hdmi_connector_in>;
> +	};
> +};
> +
> +&i2c3 {
> +	status = "okay";
> +	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
> +	pinctrl-names = "default";
> +};
> +
> +&ir {
> +	status = "okay";
> +	pinctrl-0 = <&remote_input_ao_pins>;
> +	pinctrl-names = "default";
> +};
> +
> +&pwm_AO_cd {
> +	pinctrl-0 = <&pwm_ao_d_e_pins>;
> +	pinctrl-names = "default";
> +	clocks = <&xtal>;
> +	clock-names = "clkin1";
> +	status = "okay";
> +};
> +
> +&pwm_ef {
> +	status = "okay";
> +	pinctrl-0 = <&pwm_e_pins>;
> +	pinctrl-names = "default";
> +	clocks = <&xtal>;
> +	clock-names = "clkin0";
> +};
> +
> +&pdm {
> +	pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>,
> +		    <&pdm_din2_z_pins>, <&pdm_din3_z_pins>,
> +		    <&pdm_dclk_z_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
> +&saradc {
> +	status = "okay";
> +	vref-supply = <&vddio_ao1v8>;
> +};
> +
> +/* SDIO */
> +&sd_emmc_a {
> +	status = "okay";
> +	pinctrl-0 = <&sdio_pins>;
> +	pinctrl-1 = <&sdio_clk_gate_pins>;
> +	pinctrl-names = "default", "clk-gate";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	bus-width = <4>;
> +	cap-sd-highspeed;
> +	sd-uhs-sdr50;
> +	max-frequency = <100000000>;
> +
> +	non-removable;
> +	disable-wp;
> +
> +	/* WiFi firmware requires power to be kept while in suspend */
> +	keep-power-in-suspend;
> +
> +	mmc-pwrseq = <&sdio_pwrseq>;
> +
> +	vmmc-supply = <&vddao_3v3>;
> +	vqmmc-supply = <&vddio_ao1v8>;
> +};
> +
> +/* SD card */
> +&sd_emmc_b {
> +	status = "okay";
> +	pinctrl-0 = <&sdcard_c_pins>;
> +	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
> +	pinctrl-names = "default", "clk-gate";
> +
> +	bus-width = <4>;
> +	cap-sd-highspeed;
> +	max-frequency = <50000000>;
> +	disable-wp;
> +
> +	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
> +	vmmc-supply = <&vddao_3v3>;
> +	vqmmc-supply = <&vddao_3v3>;
> +};
> +
> +/* eMMC */
> +&sd_emmc_c {
> +	status = "okay";
> +	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
> +	pinctrl-1 = <&emmc_clk_gate_pins>;
> +	pinctrl-names = "default", "clk-gate";
> +
> +	bus-width = <8>;
> +	cap-mmc-highspeed;
> +	mmc-ddr-1_8v;
> +	mmc-hs200-1_8v;
> +	max-frequency = <200000000>;
> +	non-removable;
> +	disable-wp;
> +
> +	mmc-pwrseq = <&emmc_pwrseq>;
> +	vmmc-supply = <&vddao_3v3>;
> +	vqmmc-supply = <&emmc_1v8>;
> +};
> +
> +&tdmif_b {
> +	status = "okay";
> +};
> +
> +&tdmout_b {
> +	status = "okay";
> +};
> +
> +&tohdmitx {
> +	status = "okay";
> +};
> +
> +&uart_A {
> +	status = "okay";
> +	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> +	pinctrl-names = "default";
> +	uart-has-rtscts;
> +};
> +
> +&uart_AO {
> +	status = "okay";
> +	pinctrl-0 = <&uart_ao_a_pins>;
> +	pinctrl-names = "default";
> +};
> +
> +&usb {
> +	status = "okay";
> +	dr_mode = "host";
> +};

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Re: [PATCH v3 4/4] arm64: dts: amlogic: add fbx8am DT overlays

[Neil Armstrong]

Hi,

On 13/02/2024 18:14, Marc Gonzalez wrote:
> From: Pierre-Hugues Husson <phhusson@freebox.fr>
> 
> Add support for two variants of the fbx8am board.
> 
> Signed-off-by: Pierre-Hugues Husson <phhusson@freebox.fr>
> Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
> ---
>   arch/arm64/boot/dts/amlogic/Makefile                       |  6 ++++++
>   arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso    | 35 ++++++++++++++++++++++++++++++++++
>   arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso | 25 ++++++++++++++++++++++++
>   3 files changed, 66 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index cc8b34bd583d8..1ab160bf928ae 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -8,6 +8,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-3.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-brcm.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-realtek.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
> @@ -80,3 +82,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
> +
> +# Overlays
> +meson-g12a-fbx8am-brcm-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-brcm.dtbo
> +meson-g12a-fbx8am-realtek-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-realtek.dtbo
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
> new file mode 100644
> index 0000000000000..ed79809b15859
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
> @@ -0,0 +1,35 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +// Copyright (c) 2024 Freebox SAS
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/gpio/meson-g12a-gpio.h>
> +
> +/ {
> +	compatible = "freebox,fbx8am-brcm", "freebox,fbx8am", "amlogic,g12a";

This looks fine but I'm unsure if those new compatible should be documented of not since they are in an overlay

Neil

> +};
> +
> +&uart_A {
> +	bluetooth {
> +		compatible = "brcm,bcm43438-bt";
> +		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> +		max-speed = <2000000>;
> +		clocks = <&wifi32k>;
> +		clock-names = "lpo";
> +		vbat-supply = <&vddao_3v3>;
> +		vddio-supply = <&vddio_ao1v8>;
> +	};
> +};
> +
> +&sd_emmc_a {
> +	/* Per mmc-controller.yaml */
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	/* NB: may be either AP6398S or AP6398SR3 wifi module */
> +	brcmf: wifi@1 {
> +		reg = <1>;
> +		compatible = "brcm,bcm4329-fmac";
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
> new file mode 100644
> index 0000000000000..5da88fb94fb98
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
> @@ -0,0 +1,25 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +// Copyright (c) 2024 Freebox SAS
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/gpio/meson-g12a-gpio.h>
> +
> +/ {
> +	compatible = "freebox,fbx8am-realtek", "freebox,fbx8am", "amlogic,g12a";
> +};
> +
> +&uart_A {
> +	bluetooth {
> +		compatible = "realtek,rtl8822cs-bt";
> +		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> +		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
> +		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
> +	};
> +};
> +
> +&sd_emmc_a {
> +	/* No explicit compatible for rtl8822cs sdio */
> +};

Re: [PATCH v3 4/4] arm64: dts: amlogic: add fbx8am DT overlays

[Neil Armstrong]

Hi,

On 13/02/2024 18:14, Marc Gonzalez wrote:
> From: Pierre-Hugues Husson <phhusson@freebox.fr>
> 
> Add support for two variants of the fbx8am board.
> 
> Signed-off-by: Pierre-Hugues Husson <phhusson@freebox.fr>
> Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
> ---
>   arch/arm64/boot/dts/amlogic/Makefile                       |  6 ++++++
>   arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso    | 35 ++++++++++++++++++++++++++++++++++
>   arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso | 25 ++++++++++++++++++++++++
>   3 files changed, 66 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index cc8b34bd583d8..1ab160bf928ae 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -8,6 +8,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-3.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-brcm.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-realtek.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
> @@ -80,3 +82,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
> +
> +# Overlays
> +meson-g12a-fbx8am-brcm-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-brcm.dtbo
> +meson-g12a-fbx8am-realtek-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-realtek.dtbo
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
> new file mode 100644
> index 0000000000000..ed79809b15859
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
> @@ -0,0 +1,35 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +// Copyright (c) 2024 Freebox SAS
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/gpio/meson-g12a-gpio.h>
> +
> +/ {
> +	compatible = "freebox,fbx8am-brcm", "freebox,fbx8am", "amlogic,g12a";

This looks fine but I'm unsure if those new compatible should be documented of not since they are in an overlay

Neil

> +};
> +
> +&uart_A {
> +	bluetooth {
> +		compatible = "brcm,bcm43438-bt";
> +		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> +		max-speed = <2000000>;
> +		clocks = <&wifi32k>;
> +		clock-names = "lpo";
> +		vbat-supply = <&vddao_3v3>;
> +		vddio-supply = <&vddio_ao1v8>;
> +	};
> +};
> +
> +&sd_emmc_a {
> +	/* Per mmc-controller.yaml */
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	/* NB: may be either AP6398S or AP6398SR3 wifi module */
> +	brcmf: wifi@1 {
> +		reg = <1>;
> +		compatible = "brcm,bcm4329-fmac";
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
> new file mode 100644
> index 0000000000000..5da88fb94fb98
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
> @@ -0,0 +1,25 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +// Copyright (c) 2024 Freebox SAS
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/gpio/meson-g12a-gpio.h>
> +
> +/ {
> +	compatible = "freebox,fbx8am-realtek", "freebox,fbx8am", "amlogic,g12a";
> +};
> +
> +&uart_A {
> +	bluetooth {
> +		compatible = "realtek,rtl8822cs-bt";
> +		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> +		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
> +		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
> +	};
> +};
> +
> +&sd_emmc_a {
> +	/* No explicit compatible for rtl8822cs sdio */
> +};

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v3 0/4] Add support for Freebox fbx8am boards

[Neil Armstrong]

Hi,

On Tue, 13 Feb 2024 18:11:12 +0100, Marc Gonzalez wrote:
> Add support for Freebox fbx8am boards
> 
> v3:
> - order board binding alphabetically (Conor D)
> - replace underscores with dashes in DT node names (Krzysztof K)
> - Merge overlays in the build for coverage (Rob H)
> 
> [...]

Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.9/arm64-dt)

[1/4] dt-bindings: vendor-prefixes: add freebox
      https://git.kernel.org/amlogic/c/fedeacff9611917231d710382e7ccb518cd440a6
[2/4] dt-bindings: arm: amlogic: add fbx8am binding
      https://git.kernel.org/amlogic/c/beee431b3257334e450999ebe77636bb18ca87e7
[3/4] arm64: dts: amlogic: add fbx8am board
      https://git.kernel.org/amlogic/c/acbe5b6b0fb74197ebff06a62abcfec9858c23ae
[4/4] arm64: dts: amlogic: add fbx8am DT overlays
      https://git.kernel.org/amlogic/c/13636d5502204e671398470962babbfb46bc2721

These changes has been applied on the intermediate git tree [1].

The v6.9/arm64-dt branch will then be sent via a formal Pull Request to the Linux SoC maintainers
for inclusion in their intermediate git branches in order to be sent to Linus during
the next merge window, or sooner if it's a set of fixes.

In the cases of fixes, those will be merged in the current release candidate
kernel and as soon they appear on the Linux master branch they will be
backported to the previous Stable and Long-Stable kernels [2].

The intermediate git branches are merged daily in the linux-next tree [3],
people are encouraged testing these pre-release kernels and report issues on the
relevant mailing-lists.

If problems are discovered on those changes, please submit a signed-off-by revert
patch followed by a corrective changeset.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
[3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git

-- 
Neil

Re: [PATCH v3 0/4] Add support for Freebox fbx8am boards

[Neil Armstrong]

Hi,

On Tue, 13 Feb 2024 18:11:12 +0100, Marc Gonzalez wrote:
> Add support for Freebox fbx8am boards
> 
> v3:
> - order board binding alphabetically (Conor D)
> - replace underscores with dashes in DT node names (Krzysztof K)
> - Merge overlays in the build for coverage (Rob H)
> 
> [...]

Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.9/arm64-dt)

[1/4] dt-bindings: vendor-prefixes: add freebox
      https://git.kernel.org/amlogic/c/fedeacff9611917231d710382e7ccb518cd440a6
[2/4] dt-bindings: arm: amlogic: add fbx8am binding
      https://git.kernel.org/amlogic/c/beee431b3257334e450999ebe77636bb18ca87e7
[3/4] arm64: dts: amlogic: add fbx8am board
      https://git.kernel.org/amlogic/c/acbe5b6b0fb74197ebff06a62abcfec9858c23ae
[4/4] arm64: dts: amlogic: add fbx8am DT overlays
      https://git.kernel.org/amlogic/c/13636d5502204e671398470962babbfb46bc2721

These changes has been applied on the intermediate git tree [1].

The v6.9/arm64-dt branch will then be sent via a formal Pull Request to the Linux SoC maintainers
for inclusion in their intermediate git branches in order to be sent to Linus during
the next merge window, or sooner if it's a set of fixes.

In the cases of fixes, those will be merged in the current release candidate
kernel and as soon they appear on the Linux master branch they will be
backported to the previous Stable and Long-Stable kernels [2].

The intermediate git branches are merged daily in the linux-next tree [3],
people are encouraged testing these pre-release kernels and report issues on the
relevant mailing-lists.

If problems are discovered on those changes, please submit a signed-off-by revert
patch followed by a corrective changeset.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
[3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git

-- 
Neil


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v3 4/4] arm64: dts: amlogic: add fbx8am DT overlays

[Marc Gonzalez]

On 14/02/2024 10:47, Neil Armstrong wrote:

> On 13/02/2024 18:14, Marc Gonzalez wrote:
>
>> Add support for two variants of the fbx8am board.
>>
>> Signed-off-by: Pierre-Hugues Husson <phhusson@freebox.fr>
>> Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
>> ---
>>   arch/arm64/boot/dts/amlogic/Makefile                       |  6 ++++++
>>   arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso    | 35 ++++++++++++++++++++++++++++++++++
>>   arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso | 25 ++++++++++++++++++++++++
>>   3 files changed, 66 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>> index cc8b34bd583d8..1ab160bf928ae 100644
>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>> @@ -8,6 +8,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-3.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
>> +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-brcm.dtb
>> +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-realtek.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
>> @@ -80,3 +82,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
>> +
>> +# Overlays
>> +meson-g12a-fbx8am-brcm-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-brcm.dtbo
>> +meson-g12a-fbx8am-realtek-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-realtek.dtbo
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
>> new file mode 100644
>> index 0000000000000..ed79809b15859
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
>> @@ -0,0 +1,35 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +// Copyright (c) 2024 Freebox SAS
>> +
>> +/dts-v1/;
>> +/plugin/;
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/gpio/meson-g12a-gpio.h>
>> +
>> +/ {
>> +	compatible = "freebox,fbx8am-brcm", "freebox,fbx8am", "amlogic,g12a";
> 
> This looks fine but I'm unsure if those new compatible should be documented or not,
> since they are in an overlay

Rob, Krzysztof, Conor,

Just want to make sure this was done "right".

Is it acceptable for an overlay (DTSO) to define a more specific compatible prop?

Regards



_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v3 4/4] arm64: dts: amlogic: add fbx8am DT overlays

[Marc Gonzalez]

On 14/02/2024 10:47, Neil Armstrong wrote:

> On 13/02/2024 18:14, Marc Gonzalez wrote:
>
>> Add support for two variants of the fbx8am board.
>>
>> Signed-off-by: Pierre-Hugues Husson <phhusson@freebox.fr>
>> Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
>> ---
>>   arch/arm64/boot/dts/amlogic/Makefile                       |  6 ++++++
>>   arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso    | 35 ++++++++++++++++++++++++++++++++++
>>   arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso | 25 ++++++++++++++++++++++++
>>   3 files changed, 66 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>> index cc8b34bd583d8..1ab160bf928ae 100644
>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>> @@ -8,6 +8,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-3.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
>> +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-brcm.dtb
>> +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-realtek.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
>> @@ -80,3 +82,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
>> +
>> +# Overlays
>> +meson-g12a-fbx8am-brcm-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-brcm.dtbo
>> +meson-g12a-fbx8am-realtek-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-realtek.dtbo
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
>> new file mode 100644
>> index 0000000000000..ed79809b15859
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
>> @@ -0,0 +1,35 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +// Copyright (c) 2024 Freebox SAS
>> +
>> +/dts-v1/;
>> +/plugin/;
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/gpio/meson-g12a-gpio.h>
>> +
>> +/ {
>> +	compatible = "freebox,fbx8am-brcm", "freebox,fbx8am", "amlogic,g12a";
> 
> This looks fine but I'm unsure if those new compatible should be documented or not,
> since they are in an overlay

Rob, Krzysztof, Conor,

Just want to make sure this was done "right".

Is it acceptable for an overlay (DTSO) to define a more specific compatible prop?

Regards

Re: [PATCH v3 4/4] arm64: dts: amlogic: add fbx8am DT overlays

[Krzysztof Kozlowski]

On 19/02/2024 11:32, Marc Gonzalez wrote:
> On 14/02/2024 10:47, Neil Armstrong wrote:
> 
>> On 13/02/2024 18:14, Marc Gonzalez wrote:
>>
>>> Add support for two variants of the fbx8am board.
>>>
>>> Signed-off-by: Pierre-Hugues Husson <phhusson@freebox.fr>
>>> Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
>>> ---
>>>   arch/arm64/boot/dts/amlogic/Makefile                       |  6 ++++++
>>>   arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso    | 35 ++++++++++++++++++++++++++++++++++
>>>   arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso | 25 ++++++++++++++++++++++++
>>>   3 files changed, 66 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>>> index cc8b34bd583d8..1ab160bf928ae 100644
>>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>>> @@ -8,6 +8,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
>>>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
>>>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-3.dtb
>>>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
>>> +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-brcm.dtb
>>> +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-realtek.dtb
>>>   dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb
>>>   dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
>>>   dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
>>> @@ -80,3 +82,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
>>>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>>>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
>>>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
>>> +
>>> +# Overlays
>>> +meson-g12a-fbx8am-brcm-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-brcm.dtbo
>>> +meson-g12a-fbx8am-realtek-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-realtek.dtbo
>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
>>> new file mode 100644
>>> index 0000000000000..ed79809b15859
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
>>> @@ -0,0 +1,35 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>> +// Copyright (c) 2024 Freebox SAS
>>> +
>>> +/dts-v1/;
>>> +/plugin/;
>>> +
>>> +#include <dt-bindings/gpio/gpio.h>
>>> +#include <dt-bindings/gpio/meson-g12a-gpio.h>
>>> +
>>> +/ {
>>> +	compatible = "freebox,fbx8am-brcm", "freebox,fbx8am", "amlogic,g12a";
>>
>> This looks fine but I'm unsure if those new compatible should be documented or not,
>> since they are in an overlay

All compatibles in entire Linux source code shall be documented, so
please document any new ones appearing in overlays.

> 
> Rob, Krzysztof, Conor,
> 
> Just want to make sure this was done "right".
> 
> Is it acceptable for an overlay (DTSO) to define a more specific compatible prop?

I think it is fine and some DTSO already do it. User-space might want to
identify that specific overlay is applied or not. Of course this will
not work when multiple overlays are applied and each changes compatible,
thus I would say this is in general specific to particular cases of
exclusive overlays. In such case, why not making it new board DTS?

If this is not exclusive overlay, then new compatible looks wrong.

Best regards,
Krzysztof

Re: [PATCH v3 4/4] arm64: dts: amlogic: add fbx8am DT overlays

[Krzysztof Kozlowski]

On 19/02/2024 11:32, Marc Gonzalez wrote:
> On 14/02/2024 10:47, Neil Armstrong wrote:
> 
>> On 13/02/2024 18:14, Marc Gonzalez wrote:
>>
>>> Add support for two variants of the fbx8am board.
>>>
>>> Signed-off-by: Pierre-Hugues Husson <phhusson@freebox.fr>
>>> Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
>>> ---
>>>   arch/arm64/boot/dts/amlogic/Makefile                       |  6 ++++++
>>>   arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso    | 35 ++++++++++++++++++++++++++++++++++
>>>   arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso | 25 ++++++++++++++++++++++++
>>>   3 files changed, 66 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>>> index cc8b34bd583d8..1ab160bf928ae 100644
>>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>>> @@ -8,6 +8,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
>>>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
>>>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-3.dtb
>>>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
>>> +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-brcm.dtb
>>> +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-realtek.dtb
>>>   dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb
>>>   dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
>>>   dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
>>> @@ -80,3 +82,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
>>>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>>>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
>>>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
>>> +
>>> +# Overlays
>>> +meson-g12a-fbx8am-brcm-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-brcm.dtbo
>>> +meson-g12a-fbx8am-realtek-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-realtek.dtbo
>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
>>> new file mode 100644
>>> index 0000000000000..ed79809b15859
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
>>> @@ -0,0 +1,35 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>> +// Copyright (c) 2024 Freebox SAS
>>> +
>>> +/dts-v1/;
>>> +/plugin/;
>>> +
>>> +#include <dt-bindings/gpio/gpio.h>
>>> +#include <dt-bindings/gpio/meson-g12a-gpio.h>
>>> +
>>> +/ {
>>> +	compatible = "freebox,fbx8am-brcm", "freebox,fbx8am", "amlogic,g12a";
>>
>> This looks fine but I'm unsure if those new compatible should be documented or not,
>> since they are in an overlay

All compatibles in entire Linux source code shall be documented, so
please document any new ones appearing in overlays.

> 
> Rob, Krzysztof, Conor,
> 
> Just want to make sure this was done "right".
> 
> Is it acceptable for an overlay (DTSO) to define a more specific compatible prop?

I think it is fine and some DTSO already do it. User-space might want to
identify that specific overlay is applied or not. Of course this will
not work when multiple overlays are applied and each changes compatible,
thus I would say this is in general specific to particular cases of
exclusive overlays. In such case, why not making it new board DTS?

If this is not exclusive overlay, then new compatible looks wrong.

Best regards,
Krzysztof


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v3 4/4] arm64: dts: amlogic: add fbx8am DT overlays

[Neil Armstrong]

Marc,

On 20/02/2024 11:01, Krzysztof Kozlowski wrote:
> On 19/02/2024 11:32, Marc Gonzalez wrote:
>> On 14/02/2024 10:47, Neil Armstrong wrote:
>>
>>> On 13/02/2024 18:14, Marc Gonzalez wrote:
>>>
>>>> Add support for two variants of the fbx8am board.
>>>>
>>>> Signed-off-by: Pierre-Hugues Husson <phhusson@freebox.fr>
>>>> Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
>>>> ---
>>>>    arch/arm64/boot/dts/amlogic/Makefile                       |  6 ++++++
>>>>    arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso    | 35 ++++++++++++++++++++++++++++++++++
>>>>    arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso | 25 ++++++++++++++++++++++++
>>>>    3 files changed, 66 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>>>> index cc8b34bd583d8..1ab160bf928ae 100644
>>>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>>>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>>>> @@ -8,6 +8,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
>>>>    dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
>>>>    dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-3.dtb
>>>>    dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
>>>> +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-brcm.dtb
>>>> +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-realtek.dtb
>>>>    dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb
>>>>    dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
>>>>    dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
>>>> @@ -80,3 +82,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
>>>>    dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>>>>    dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
>>>>    dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
>>>> +
>>>> +# Overlays
>>>> +meson-g12a-fbx8am-brcm-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-brcm.dtbo
>>>> +meson-g12a-fbx8am-realtek-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-realtek.dtbo
>>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
>>>> new file mode 100644
>>>> index 0000000000000..ed79809b15859
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
>>>> @@ -0,0 +1,35 @@
>>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>>> +// Copyright (c) 2024 Freebox SAS
>>>> +
>>>> +/dts-v1/;
>>>> +/plugin/;
>>>> +
>>>> +#include <dt-bindings/gpio/gpio.h>
>>>> +#include <dt-bindings/gpio/meson-g12a-gpio.h>
>>>> +
>>>> +/ {
>>>> +	compatible = "freebox,fbx8am-brcm", "freebox,fbx8am", "amlogic,g12a";
>>>
>>> This looks fine but I'm unsure if those new compatible should be documented or not,
>>> since they are in an overlay
> 
> All compatibles in entire Linux source code shall be documented, so
> please document any new ones appearing in overlays.

You can either add a follow-up patch to:
- document those new compatibles
- remove those compatibles

As you want, I plan to send the ARM64 DT PR next week.

Neil


> 
>>
>> Rob, Krzysztof, Conor,
>>
>> Just want to make sure this was done "right".
>>
>> Is it acceptable for an overlay (DTSO) to define a more specific compatible prop?
> 
> I think it is fine and some DTSO already do it. User-space might want to
> identify that specific overlay is applied or not. Of course this will
> not work when multiple overlays are applied and each changes compatible,
> thus I would say this is in general specific to particular cases of
> exclusive overlays. In such case, why not making it new board DTS?
> 
> If this is not exclusive overlay, then new compatible looks wrong.
> 
> Best regards,
> Krzysztof
> 

Re: [PATCH v3 4/4] arm64: dts: amlogic: add fbx8am DT overlays

[Neil Armstrong]

Marc,

On 20/02/2024 11:01, Krzysztof Kozlowski wrote:
> On 19/02/2024 11:32, Marc Gonzalez wrote:
>> On 14/02/2024 10:47, Neil Armstrong wrote:
>>
>>> On 13/02/2024 18:14, Marc Gonzalez wrote:
>>>
>>>> Add support for two variants of the fbx8am board.
>>>>
>>>> Signed-off-by: Pierre-Hugues Husson <phhusson@freebox.fr>
>>>> Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
>>>> ---
>>>>    arch/arm64/boot/dts/amlogic/Makefile                       |  6 ++++++
>>>>    arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso    | 35 ++++++++++++++++++++++++++++++++++
>>>>    arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso | 25 ++++++++++++++++++++++++
>>>>    3 files changed, 66 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>>>> index cc8b34bd583d8..1ab160bf928ae 100644
>>>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>>>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>>>> @@ -8,6 +8,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
>>>>    dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
>>>>    dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-3.dtb
>>>>    dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
>>>> +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-brcm.dtb
>>>> +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-realtek.dtb
>>>>    dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb
>>>>    dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
>>>>    dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
>>>> @@ -80,3 +82,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
>>>>    dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>>>>    dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
>>>>    dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
>>>> +
>>>> +# Overlays
>>>> +meson-g12a-fbx8am-brcm-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-brcm.dtbo
>>>> +meson-g12a-fbx8am-realtek-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-realtek.dtbo
>>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
>>>> new file mode 100644
>>>> index 0000000000000..ed79809b15859
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
>>>> @@ -0,0 +1,35 @@
>>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>>> +// Copyright (c) 2024 Freebox SAS
>>>> +
>>>> +/dts-v1/;
>>>> +/plugin/;
>>>> +
>>>> +#include <dt-bindings/gpio/gpio.h>
>>>> +#include <dt-bindings/gpio/meson-g12a-gpio.h>
>>>> +
>>>> +/ {
>>>> +	compatible = "freebox,fbx8am-brcm", "freebox,fbx8am", "amlogic,g12a";
>>>
>>> This looks fine but I'm unsure if those new compatible should be documented or not,
>>> since they are in an overlay
> 
> All compatibles in entire Linux source code shall be documented, so
> please document any new ones appearing in overlays.

You can either add a follow-up patch to:
- document those new compatibles
- remove those compatibles

As you want, I plan to send the ARM64 DT PR next week.

Neil


> 
>>
>> Rob, Krzysztof, Conor,
>>
>> Just want to make sure this was done "right".
>>
>> Is it acceptable for an overlay (DTSO) to define a more specific compatible prop?
> 
> I think it is fine and some DTSO already do it. User-space might want to
> identify that specific overlay is applied or not. Of course this will
> not work when multiple overlays are applied and each changes compatible,
> thus I would say this is in general specific to particular cases of
> exclusive overlays. In such case, why not making it new board DTS?
> 
> If this is not exclusive overlay, then new compatible looks wrong.
> 
> Best regards,
> Krzysztof
> 


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH] fixup! arm64: dts: amlogic: add fbx8am DT overlays

[Marc Gonzalez]

Drop compatible properties as requested.

Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
---
 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso    | 4 ----
 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso | 4 ----
 2 files changed, 8 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
index ed79809b15859..9591fdc31ee0e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
@@ -7,10 +7,6 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
 
-/ {
-	compatible = "freebox,fbx8am-brcm", "freebox,fbx8am", "amlogic,g12a";
-};
-
 &uart_A {
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
index 5da88fb94fb98..55fff35b09ae7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
@@ -7,10 +7,6 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
 
-/ {
-	compatible = "freebox,fbx8am-realtek", "freebox,fbx8am", "amlogic,g12a";
-};
-
 &uart_A {
 	bluetooth {
 		compatible = "realtek,rtl8822cs-bt";
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH] fixup! arm64: dts: amlogic: add fbx8am DT overlays

[Marc Gonzalez]

Drop compatible properties as requested.

Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
---
 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso    | 4 ----
 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso | 4 ----
 2 files changed, 8 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
index ed79809b15859..9591fdc31ee0e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
@@ -7,10 +7,6 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
 
-/ {
-	compatible = "freebox,fbx8am-brcm", "freebox,fbx8am", "amlogic,g12a";
-};
-
 &uart_A {
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
index 5da88fb94fb98..55fff35b09ae7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
@@ -7,10 +7,6 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
 
-/ {
-	compatible = "freebox,fbx8am-realtek", "freebox,fbx8am", "amlogic,g12a";
-};
-
 &uart_A {
 	bluetooth {
 		compatible = "realtek,rtl8822cs-bt";
-- 
2.34.1

Re: [PATCH] fixup! arm64: dts: amlogic: add fbx8am DT overlays

[Neil Armstrong]

On 21/02/2024 14:48, Marc Gonzalez wrote:
> Drop compatible properties as requested.
> 
> Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
> ---
>   arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso    | 4 ----
>   arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso | 4 ----
>   2 files changed, 8 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
> index ed79809b15859..9591fdc31ee0e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
> @@ -7,10 +7,6 @@
>   #include <dt-bindings/gpio/gpio.h>
>   #include <dt-bindings/gpio/meson-g12a-gpio.h>
>   
> -/ {
> -	compatible = "freebox,fbx8am-brcm", "freebox,fbx8am", "amlogic,g12a";
> -};
> -
>   &uart_A {
>   	bluetooth {
>   		compatible = "brcm,bcm43438-bt";
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
> index 5da88fb94fb98..55fff35b09ae7 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
> @@ -7,10 +7,6 @@
>   #include <dt-bindings/gpio/gpio.h>
>   #include <dt-bindings/gpio/meson-g12a-gpio.h>
>   
> -/ {
> -	compatible = "freebox,fbx8am-realtek", "freebox,fbx8am", "amlogic,g12a";
> -};
> -
>   &uart_A {
>   	bluetooth {
>   		compatible = "realtek,rtl8822cs-bt";

Squashed on https://git.kernel.org/amlogic/c/13636d5502204e671398470962babbfb46bc2721
now is:
https://git.kernel.org/amlogic/c/d881d79f8c77d7f9935a8d9424a1dc4364787bf1

Thanks,
Neil

Re: [PATCH] fixup! arm64: dts: amlogic: add fbx8am DT overlays

[Neil Armstrong]

On 21/02/2024 14:48, Marc Gonzalez wrote:
> Drop compatible properties as requested.
> 
> Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
> ---
>   arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso    | 4 ----
>   arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso | 4 ----
>   2 files changed, 8 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
> index ed79809b15859..9591fdc31ee0e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
> @@ -7,10 +7,6 @@
>   #include <dt-bindings/gpio/gpio.h>
>   #include <dt-bindings/gpio/meson-g12a-gpio.h>
>   
> -/ {
> -	compatible = "freebox,fbx8am-brcm", "freebox,fbx8am", "amlogic,g12a";
> -};
> -
>   &uart_A {
>   	bluetooth {
>   		compatible = "brcm,bcm43438-bt";
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
> index 5da88fb94fb98..55fff35b09ae7 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
> @@ -7,10 +7,6 @@
>   #include <dt-bindings/gpio/gpio.h>
>   #include <dt-bindings/gpio/meson-g12a-gpio.h>
>   
> -/ {
> -	compatible = "freebox,fbx8am-realtek", "freebox,fbx8am", "amlogic,g12a";
> -};
> -
>   &uart_A {
>   	bluetooth {
>   		compatible = "realtek,rtl8822cs-bt";

Squashed on https://git.kernel.org/amlogic/c/13636d5502204e671398470962babbfb46bc2721
now is:
https://git.kernel.org/amlogic/c/d881d79f8c77d7f9935a8d9424a1dc4364787bf1

Thanks,
Neil

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic