[PATCH v2 0/6] add Mali-450 support to MT7623 SoC

[PATCH v2 0/6] add Mali-450 support to MT7623 SoC

[sean.wang]

From: Sean Wang <sean.wang@mediatek.com>

v2:
   changes from v1 to v2:
 	- Add Reviewed-by tag from v1 result
 	- Split out the changes for dt-bindings .h from the changes for driver
 	- Fix up the typo in g3dsys dt-bindings documentation
v1:

Hi,

The series adds a required resource setup to allow Mali-450 to work on
MT7623. This also can benefits other MediaTek SoCs having Mali-450 device.

In order to prove the setup is proper, I also have added mediatek port to
linux-lima at [1] and make a few of tests along with off-screen rendering
[2][3][4][5][6][7] through mesa-lima [8]. All work correctly.

[1] https://github.com/objelf/linux-lima/tree/mediatek-lima-4.16-rc5
[2] simple triangle: https://github.com/yuq/gfx/tree/master/gbm-surface
[3] vertex shader uniform: https://github.com/yuq/gfx/tree/master/gbm-surface-move
[4] multi varying: https://github.com/yuq/gfx/tree/master/gbm-surface-color
[5] multi draw: https://github.com/yuq/gfx/tree/master/gbm-surface-draw
[6] FBO: https://github.com/yuq/gfx/tree/master/gbm-surface-fbo
[7] kmscube: https://github.com/yuq/kmscube
[8] https://github.com/yuq/mesa-lima

Hope these patches can help people working on BPI-R2.

	Sean

Sean Wang (6):
  dt-bindings: gpu: mali-utgard: add mediatek,mt7623-mali compatible
  dt-bindings: clock: mediatek: add g3dsys bindings
  dt-bindings: clock: mediatek: add entry for Mali-450 node to refer
  dt-bindings: reset: mediatek: add entry for Mali-450 node to refer
  clk: mediatek: add g3dsys support for MT2701 and MT7623
  arm: dts: mt7623: add Mali-450 and related device nodes

 .../bindings/arm/mediatek/mediatek,g3dsys.txt      | 30 +++++++
 .../devicetree/bindings/gpu/arm,mali-utgard.txt    |  9 ++
 arch/arm/boot/dts/mt7623.dtsi                      | 70 ++++++++++++++++
 arch/arm/boot/dts/mt7623a.dtsi                     |  4 +
 drivers/clk/mediatek/Kconfig                       |  6 ++
 drivers/clk/mediatek/Makefile                      |  1 +
 drivers/clk/mediatek/clk-mt2701-g3d.c              | 95 ++++++++++++++++++++++
 include/dt-bindings/clock/mt2701-clk.h             |  4 +
 include/dt-bindings/reset/mt2701-resets.h          |  3 +
 9 files changed, 222 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt
 create mode 100644 drivers/clk/mediatek/clk-mt2701-g3d.c

-- 
2.7.4

[PATCH v2 0/6] add Mali-450 support to MT7623 SoC

[sean.wang]

From: Sean Wang <sean.wang@mediatek.com>

v2:
   changes from v1 to v2:
 	- Add Reviewed-by tag from v1 result
 	- Split out the changes for dt-bindings .h from the changes for driver
 	- Fix up the typo in g3dsys dt-bindings documentation
v1:

Hi,

The series adds a required resource setup to allow Mali-450 to work on
MT7623. This also can benefits other MediaTek SoCs having Mali-450 device.

In order to prove the setup is proper, I also have added mediatek port to
linux-lima at [1] and make a few of tests along with off-screen rendering
[2][3][4][5][6][7] through mesa-lima [8]. All work correctly.

[1] https://github.com/objelf/linux-lima/tree/mediatek-lima-4.16-rc5
[2] simple triangle: https://github.com/yuq/gfx/tree/master/gbm-surface
[3] vertex shader uniform: https://github.com/yuq/gfx/tree/master/gbm-surface-move
[4] multi varying: https://github.com/yuq/gfx/tree/master/gbm-surface-color
[5] multi draw: https://github.com/yuq/gfx/tree/master/gbm-surface-draw
[6] FBO: https://github.com/yuq/gfx/tree/master/gbm-surface-fbo
[7] kmscube: https://github.com/yuq/kmscube
[8] https://github.com/yuq/mesa-lima

Hope these patches can help people working on BPI-R2.

	Sean

Sean Wang (6):
  dt-bindings: gpu: mali-utgard: add mediatek,mt7623-mali compatible
  dt-bindings: clock: mediatek: add g3dsys bindings
  dt-bindings: clock: mediatek: add entry for Mali-450 node to refer
  dt-bindings: reset: mediatek: add entry for Mali-450 node to refer
  clk: mediatek: add g3dsys support for MT2701 and MT7623
  arm: dts: mt7623: add Mali-450 and related device nodes

 .../bindings/arm/mediatek/mediatek,g3dsys.txt      | 30 +++++++
 .../devicetree/bindings/gpu/arm,mali-utgard.txt    |  9 ++
 arch/arm/boot/dts/mt7623.dtsi                      | 70 ++++++++++++++++
 arch/arm/boot/dts/mt7623a.dtsi                     |  4 +
 drivers/clk/mediatek/Kconfig                       |  6 ++
 drivers/clk/mediatek/Makefile                      |  1 +
 drivers/clk/mediatek/clk-mt2701-g3d.c              | 95 ++++++++++++++++++++++
 include/dt-bindings/clock/mt2701-clk.h             |  4 +
 include/dt-bindings/reset/mt2701-resets.h          |  3 +
 9 files changed, 222 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt
 create mode 100644 drivers/clk/mediatek/clk-mt2701-g3d.c

-- 
2.7.4

[PATCH v2 0/6] add Mali-450 support to MT7623 SoC

[sean.wang at mediatek.com]

From: Sean Wang <sean.wang@mediatek.com>

v2:
   changes from v1 to v2:
 	- Add Reviewed-by tag from v1 result
 	- Split out the changes for dt-bindings .h from the changes for driver
 	- Fix up the typo in g3dsys dt-bindings documentation
v1:

Hi,

The series adds a required resource setup to allow Mali-450 to work on
MT7623. This also can benefits other MediaTek SoCs having Mali-450 device.

In order to prove the setup is proper, I also have added mediatek port to
linux-lima at [1] and make a few of tests along with off-screen rendering
[2][3][4][5][6][7] through mesa-lima [8]. All work correctly.

[1] https://github.com/objelf/linux-lima/tree/mediatek-lima-4.16-rc5
[2] simple triangle: https://github.com/yuq/gfx/tree/master/gbm-surface
[3] vertex shader uniform: https://github.com/yuq/gfx/tree/master/gbm-surface-move
[4] multi varying: https://github.com/yuq/gfx/tree/master/gbm-surface-color
[5] multi draw: https://github.com/yuq/gfx/tree/master/gbm-surface-draw
[6] FBO: https://github.com/yuq/gfx/tree/master/gbm-surface-fbo
[7] kmscube: https://github.com/yuq/kmscube
[8] https://github.com/yuq/mesa-lima

Hope these patches can help people working on BPI-R2.

	Sean

Sean Wang (6):
  dt-bindings: gpu: mali-utgard: add mediatek,mt7623-mali compatible
  dt-bindings: clock: mediatek: add g3dsys bindings
  dt-bindings: clock: mediatek: add entry for Mali-450 node to refer
  dt-bindings: reset: mediatek: add entry for Mali-450 node to refer
  clk: mediatek: add g3dsys support for MT2701 and MT7623
  arm: dts: mt7623: add Mali-450 and related device nodes

 .../bindings/arm/mediatek/mediatek,g3dsys.txt      | 30 +++++++
 .../devicetree/bindings/gpu/arm,mali-utgard.txt    |  9 ++
 arch/arm/boot/dts/mt7623.dtsi                      | 70 ++++++++++++++++
 arch/arm/boot/dts/mt7623a.dtsi                     |  4 +
 drivers/clk/mediatek/Kconfig                       |  6 ++
 drivers/clk/mediatek/Makefile                      |  1 +
 drivers/clk/mediatek/clk-mt2701-g3d.c              | 95 ++++++++++++++++++++++
 include/dt-bindings/clock/mt2701-clk.h             |  4 +
 include/dt-bindings/reset/mt2701-resets.h          |  3 +
 9 files changed, 222 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt
 create mode 100644 drivers/clk/mediatek/clk-mt2701-g3d.c

-- 
2.7.4

[PATCH v2 1/6] dt-bindings: gpu: mali-utgard: add mediatek,mt7623-mali compatible

[sean.wang]

From: Sean Wang <sean.wang@mediatek.com>

The MediaTek MT7623 SoC contains a Mali-450, so add a compatible for it
and define its own vendor-specific properties.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
index 99d1c0a..656068f 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
@@ -19,6 +19,7 @@ Required properties:
       + rockchip,rk3228-mali
       + rockchip,rk3328-mali
       + stericsson,db8500-mali
+      + mediatek,mt7623-mali
 
   - reg: Physical base address and length of the GPU registers
 
@@ -89,6 +90,14 @@ to specify one more vendor-specific compatible, among:
       * interrupt-names and interrupts:
         + combined: combined interrupt of all of the above lines
 
+  - mediatek,mt7623-mali
+     Required properties:
+      * resets: phandle to the reset line for the GPU
+      * mediatek,larb: phandle pointed to the local arbiter used to control the
+	access to external memory on the SoC.
+	see Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+	for details
+
 Example:
 
 mali: gpu@1c40000 {
-- 
2.7.4

[PATCH v2 1/6] dt-bindings: gpu: mali-utgard: add mediatek,mt7623-mali compatible

[sean.wang]

From: Sean Wang <sean.wang@mediatek.com>

The MediaTek MT7623 SoC contains a Mali-450, so add a compatible for it
and define its own vendor-specific properties.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
index 99d1c0a..656068f 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
@@ -19,6 +19,7 @@ Required properties:
       + rockchip,rk3228-mali
       + rockchip,rk3328-mali
       + stericsson,db8500-mali
+      + mediatek,mt7623-mali
 
   - reg: Physical base address and length of the GPU registers
 
@@ -89,6 +90,14 @@ to specify one more vendor-specific compatible, among:
       * interrupt-names and interrupts:
         + combined: combined interrupt of all of the above lines
 
+  - mediatek,mt7623-mali
+     Required properties:
+      * resets: phandle to the reset line for the GPU
+      * mediatek,larb: phandle pointed to the local arbiter used to control the
+	access to external memory on the SoC.
+	see Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+	for details
+
 Example:
 
 mali: gpu@1c40000 {
-- 
2.7.4

[PATCH v2 1/6] dt-bindings: gpu: mali-utgard: add mediatek, mt7623-mali compatible

[sean.wang at mediatek.com]

From: Sean Wang <sean.wang@mediatek.com>

The MediaTek MT7623 SoC contains a Mali-450, so add a compatible for it
and define its own vendor-specific properties.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
index 99d1c0a..656068f 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
@@ -19,6 +19,7 @@ Required properties:
       + rockchip,rk3228-mali
       + rockchip,rk3328-mali
       + stericsson,db8500-mali
+      + mediatek,mt7623-mali
 
   - reg: Physical base address and length of the GPU registers
 
@@ -89,6 +90,14 @@ to specify one more vendor-specific compatible, among:
       * interrupt-names and interrupts:
         + combined: combined interrupt of all of the above lines
 
+  - mediatek,mt7623-mali
+     Required properties:
+      * resets: phandle to the reset line for the GPU
+      * mediatek,larb: phandle pointed to the local arbiter used to control the
+	access to external memory on the SoC.
+	see Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+	for details
+
 Example:
 
 mali: gpu at 1c40000 {
-- 
2.7.4

[PATCH v2 2/6] dt-bindings: clock: mediatek: add g3dsys bindings

[sean.wang]

From: Sean Wang <sean.wang@mediatek.com>

Add bindings to g3dsys providing necessary clock and reset control to
Mali-450.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 .../bindings/arm/mediatek/mediatek,g3dsys.txt      | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt
new file mode 100644
index 0000000..7de43bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt
@@ -0,0 +1,30 @@
+MediaTek g3dsys controller
+============================
+
+The MediaTek g3dsys controller provides various clocks and reset controller to
+the GPU.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt2701-g3dsys", "syscon":
+		for MT2701 SoC
+	- "mediatek,mt7623-g3dsys", "mediatek,mt2701-g3dsys", "syscon":
+		for MT7623 SoC
+- #clock-cells: Must be 1
+- #reset-cells: Must be 1
+
+The g3dsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+g3dsys: clock-controller@13000000 {
+	compatible = "mediatek,mt7623-g3dsys",
+		     "mediatek,mt2701-g3dsys",
+		     "syscon";
+	reg = <0 0x13000000 0 0x200>;
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};
-- 
2.7.4

[PATCH v2 2/6] dt-bindings: clock: mediatek: add g3dsys bindings

[sean.wang]

From: Sean Wang <sean.wang@mediatek.com>

Add bindings to g3dsys providing necessary clock and reset control to
Mali-450.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 .../bindings/arm/mediatek/mediatek,g3dsys.txt      | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt
new file mode 100644
index 0000000..7de43bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt
@@ -0,0 +1,30 @@
+MediaTek g3dsys controller
+============================
+
+The MediaTek g3dsys controller provides various clocks and reset controller to
+the GPU.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt2701-g3dsys", "syscon":
+		for MT2701 SoC
+	- "mediatek,mt7623-g3dsys", "mediatek,mt2701-g3dsys", "syscon":
+		for MT7623 SoC
+- #clock-cells: Must be 1
+- #reset-cells: Must be 1
+
+The g3dsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+g3dsys: clock-controller@13000000 {
+	compatible = "mediatek,mt7623-g3dsys",
+		     "mediatek,mt2701-g3dsys",
+		     "syscon";
+	reg = <0 0x13000000 0 0x200>;
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};
-- 
2.7.4

[PATCH v2 2/6] dt-bindings: clock: mediatek: add g3dsys bindings

[sean.wang at mediatek.com]

From: Sean Wang <sean.wang@mediatek.com>

Add bindings to g3dsys providing necessary clock and reset control to
Mali-450.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 .../bindings/arm/mediatek/mediatek,g3dsys.txt      | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt
new file mode 100644
index 0000000..7de43bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt
@@ -0,0 +1,30 @@
+MediaTek g3dsys controller
+============================
+
+The MediaTek g3dsys controller provides various clocks and reset controller to
+the GPU.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt2701-g3dsys", "syscon":
+		for MT2701 SoC
+	- "mediatek,mt7623-g3dsys", "mediatek,mt2701-g3dsys", "syscon":
+		for MT7623 SoC
+- #clock-cells: Must be 1
+- #reset-cells: Must be 1
+
+The g3dsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+g3dsys: clock-controller at 13000000 {
+	compatible = "mediatek,mt7623-g3dsys",
+		     "mediatek,mt2701-g3dsys",
+		     "syscon";
+	reg = <0 0x13000000 0 0x200>;
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};
-- 
2.7.4

[PATCH v2 3/6] dt-bindings: clock: mediatek: add entry for Mali-450 node to refer

[sean.wang]

From: Sean Wang <sean.wang@mediatek.com>

Just add binding for a required clock referenced by Mali-450 on MT7623
or MT2701 SoC.

Cc: devicetree@vger.kernel.org
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 include/dt-bindings/clock/mt2701-clk.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/include/dt-bindings/clock/mt2701-clk.h b/include/dt-bindings/clock/mt2701-clk.h
index 24e93df..2ac62a6 100644
--- a/include/dt-bindings/clock/mt2701-clk.h
+++ b/include/dt-bindings/clock/mt2701-clk.h
@@ -431,6 +431,10 @@
 #define CLK_ETHSYS_CRYPTO			8
 #define CLK_ETHSYS_NR				9
 
+/* G3DSYS */
+#define CLK_G3DSYS_CORE				1
+#define CLK_G3DSYS_NR				2
+
 /* BDP */
 
 #define CLK_BDP_BRG_BA				1
-- 
2.7.4

[PATCH v2 3/6] dt-bindings: clock: mediatek: add entry for Mali-450 node to refer

[sean.wang]

From: Sean Wang <sean.wang@mediatek.com>

Just add binding for a required clock referenced by Mali-450 on MT7623
or MT2701 SoC.

Cc: devicetree@vger.kernel.org
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 include/dt-bindings/clock/mt2701-clk.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/include/dt-bindings/clock/mt2701-clk.h b/include/dt-bindings/clock/mt2701-clk.h
index 24e93df..2ac62a6 100644
--- a/include/dt-bindings/clock/mt2701-clk.h
+++ b/include/dt-bindings/clock/mt2701-clk.h
@@ -431,6 +431,10 @@
 #define CLK_ETHSYS_CRYPTO			8
 #define CLK_ETHSYS_NR				9
 
+/* G3DSYS */
+#define CLK_G3DSYS_CORE				1
+#define CLK_G3DSYS_NR				2
+
 /* BDP */
 
 #define CLK_BDP_BRG_BA				1
-- 
2.7.4

[PATCH v2 3/6] dt-bindings: clock: mediatek: add entry for Mali-450 node to refer

[sean.wang at mediatek.com]

From: Sean Wang <sean.wang@mediatek.com>

Just add binding for a required clock referenced by Mali-450 on MT7623
or MT2701 SoC.

Cc: devicetree at vger.kernel.org
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 include/dt-bindings/clock/mt2701-clk.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/include/dt-bindings/clock/mt2701-clk.h b/include/dt-bindings/clock/mt2701-clk.h
index 24e93df..2ac62a6 100644
--- a/include/dt-bindings/clock/mt2701-clk.h
+++ b/include/dt-bindings/clock/mt2701-clk.h
@@ -431,6 +431,10 @@
 #define CLK_ETHSYS_CRYPTO			8
 #define CLK_ETHSYS_NR				9
 
+/* G3DSYS */
+#define CLK_G3DSYS_CORE				1
+#define CLK_G3DSYS_NR				2
+
 /* BDP */
 
 #define CLK_BDP_BRG_BA				1
-- 
2.7.4

[PATCH v2 4/6] dt-bindings: reset: mediatek: add entry for Mali-450 node to refer

[sean.wang]

From: Sean Wang <sean.wang@mediatek.com>

Just add binding for a required reset referenced by Mali-450 on MT7623
or MT2701 SoC.

Cc: devicetree@vger.kernel.org
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 include/dt-bindings/reset/mt2701-resets.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/include/dt-bindings/reset/mt2701-resets.h b/include/dt-bindings/reset/mt2701-resets.h
index 21deb54..50b7f06 100644
--- a/include/dt-bindings/reset/mt2701-resets.h
+++ b/include/dt-bindings/reset/mt2701-resets.h
@@ -87,4 +87,7 @@
 #define MT2701_ETHSYS_GMAC_RST			23
 #define MT2701_ETHSYS_PPE_RST			31
 
+/* G3DSYS resets */
+#define MT2701_G3DSYS_CORE_RST			0
+
 #endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT2701 */
-- 
2.7.4

[PATCH v2 4/6] dt-bindings: reset: mediatek: add entry for Mali-450 node to refer

[sean.wang]

From: Sean Wang <sean.wang@mediatek.com>

Just add binding for a required reset referenced by Mali-450 on MT7623
or MT2701 SoC.

Cc: devicetree@vger.kernel.org
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 include/dt-bindings/reset/mt2701-resets.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/include/dt-bindings/reset/mt2701-resets.h b/include/dt-bindings/reset/mt2701-resets.h
index 21deb54..50b7f06 100644
--- a/include/dt-bindings/reset/mt2701-resets.h
+++ b/include/dt-bindings/reset/mt2701-resets.h
@@ -87,4 +87,7 @@
 #define MT2701_ETHSYS_GMAC_RST			23
 #define MT2701_ETHSYS_PPE_RST			31
 
+/* G3DSYS resets */
+#define MT2701_G3DSYS_CORE_RST			0
+
 #endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT2701 */
-- 
2.7.4

[PATCH v2 4/6] dt-bindings: reset: mediatek: add entry for Mali-450 node to refer

[sean.wang at mediatek.com]

From: Sean Wang <sean.wang@mediatek.com>

Just add binding for a required reset referenced by Mali-450 on MT7623
or MT2701 SoC.

Cc: devicetree at vger.kernel.org
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 include/dt-bindings/reset/mt2701-resets.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/include/dt-bindings/reset/mt2701-resets.h b/include/dt-bindings/reset/mt2701-resets.h
index 21deb54..50b7f06 100644
--- a/include/dt-bindings/reset/mt2701-resets.h
+++ b/include/dt-bindings/reset/mt2701-resets.h
@@ -87,4 +87,7 @@
 #define MT2701_ETHSYS_GMAC_RST			23
 #define MT2701_ETHSYS_PPE_RST			31
 
+/* G3DSYS resets */
+#define MT2701_G3DSYS_CORE_RST			0
+
 #endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT2701 */
-- 
2.7.4

[PATCH v2 5/6] clk: mediatek: add g3dsys support for MT2701 and MT7623

[sean.wang]

From: Sean Wang <sean.wang@mediatek.com>

Add clock driver support for g3dsys on MT2701 and MT7623, which is
providing essential clock gate and reset controller to Mali-450.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 drivers/clk/mediatek/Kconfig          |  6 +++
 drivers/clk/mediatek/Makefile         |  1 +
 drivers/clk/mediatek/clk-mt2701-g3d.c | 95 +++++++++++++++++++++++++++++++++++
 3 files changed, 102 insertions(+)
 create mode 100644 drivers/clk/mediatek/clk-mt2701-g3d.c

diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
index 92afe59..3dd1dab 100644
--- a/drivers/clk/mediatek/Kconfig
+++ b/drivers/clk/mediatek/Kconfig
@@ -60,6 +60,12 @@ config COMMON_CLK_MT2701_AUDSYS
 	---help---
 	  This driver supports Mediatek MT2701 audsys clocks.
 
+config COMMON_CLK_MT2701_G3DSYS
+	bool "Clock driver for MediaTek MT2701 g3dsys"
+	depends on COMMON_CLK_MT2701
+	---help---
+	  This driver supports MediaTek MT2701 g3dsys clocks.
+
 config COMMON_CLK_MT2712
 	bool "Clock driver for MediaTek MT2712"
 	depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index b80eff2..844b55d 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_COMMON_CLK_MT2701) += clk-mt2701.o
 obj-$(CONFIG_COMMON_CLK_MT2701_AUDSYS) += clk-mt2701-aud.o
 obj-$(CONFIG_COMMON_CLK_MT2701_BDPSYS) += clk-mt2701-bdp.o
 obj-$(CONFIG_COMMON_CLK_MT2701_ETHSYS) += clk-mt2701-eth.o
+obj-$(CONFIG_COMMON_CLK_MT2701_G3DSYS) += clk-mt2701-g3d.o
 obj-$(CONFIG_COMMON_CLK_MT2701_HIFSYS) += clk-mt2701-hif.o
 obj-$(CONFIG_COMMON_CLK_MT2701_IMGSYS) += clk-mt2701-img.o
 obj-$(CONFIG_COMMON_CLK_MT2701_MMSYS) += clk-mt2701-mm.o
diff --git a/drivers/clk/mediatek/clk-mt2701-g3d.c b/drivers/clk/mediatek/clk-mt2701-g3d.c
new file mode 100644
index 0000000..1328c11
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt2701-g3d.c
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt2701-clk.h>
+
+#define GATE_G3D(_id, _name, _parent, _shift) {	\
+		.id = _id,				\
+		.name = _name,				\
+		.parent_name = _parent,			\
+		.regs = &g3d_cg_regs,			\
+		.shift = _shift,			\
+		.ops = &mtk_clk_gate_ops_setclr,	\
+	}
+
+static const struct mtk_gate_regs g3d_cg_regs = {
+	.sta_ofs = 0x0,
+	.set_ofs = 0x4,
+	.clr_ofs = 0x8,
+};
+
+static const struct mtk_gate g3d_clks[] = {
+	GATE_G3D(CLK_G3DSYS_CORE, "g3d_core", "mfg_sel", 0),
+};
+
+static int clk_mt2701_g3dsys_init(struct platform_device *pdev)
+{
+	struct clk_onecell_data *clk_data;
+	struct device_node *node = pdev->dev.of_node;
+	int r;
+
+	clk_data = mtk_alloc_clk_data(CLK_G3DSYS_NR);
+
+	mtk_clk_register_gates(node, g3d_clks, ARRAY_SIZE(g3d_clks),
+			       clk_data);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+	if (r)
+		dev_err(&pdev->dev,
+			"could not register clock provider: %s: %d\n",
+			pdev->name, r);
+
+	mtk_register_reset_controller(node, 1, 0xc);
+
+	return r;
+}
+
+static const struct of_device_id of_match_clk_mt2701_g3d[] = {
+	{
+		.compatible = "mediatek,mt2701-g3dsys",
+		.data = clk_mt2701_g3dsys_init,
+	}, {
+		/* sentinel */
+	}
+};
+
+static int clk_mt2701_g3d_probe(struct platform_device *pdev)
+{
+	int (*clk_init)(struct platform_device *);
+	int r;
+
+	clk_init = of_device_get_match_data(&pdev->dev);
+	if (!clk_init)
+		return -EINVAL;
+
+	r = clk_init(pdev);
+	if (r)
+		dev_err(&pdev->dev,
+			"could not register clock provider: %s: %d\n",
+			pdev->name, r);
+
+	return r;
+}
+
+static struct platform_driver clk_mt2701_g3d_drv = {
+	.probe = clk_mt2701_g3d_probe,
+	.driver = {
+		.name = "clk-mt2701-g3d",
+		.of_match_table = of_match_clk_mt2701_g3d,
+	},
+};
+
+builtin_platform_driver(clk_mt2701_g3d_drv);
-- 
2.7.4

[PATCH v2 5/6] clk: mediatek: add g3dsys support for MT2701 and MT7623

[sean.wang]

From: Sean Wang <sean.wang@mediatek.com>

Add clock driver support for g3dsys on MT2701 and MT7623, which is
providing essential clock gate and reset controller to Mali-450.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 drivers/clk/mediatek/Kconfig          |  6 +++
 drivers/clk/mediatek/Makefile         |  1 +
 drivers/clk/mediatek/clk-mt2701-g3d.c | 95 +++++++++++++++++++++++++++++++++++
 3 files changed, 102 insertions(+)
 create mode 100644 drivers/clk/mediatek/clk-mt2701-g3d.c

diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
index 92afe59..3dd1dab 100644
--- a/drivers/clk/mediatek/Kconfig
+++ b/drivers/clk/mediatek/Kconfig
@@ -60,6 +60,12 @@ config COMMON_CLK_MT2701_AUDSYS
 	---help---
 	  This driver supports Mediatek MT2701 audsys clocks.
 
+config COMMON_CLK_MT2701_G3DSYS
+	bool "Clock driver for MediaTek MT2701 g3dsys"
+	depends on COMMON_CLK_MT2701
+	---help---
+	  This driver supports MediaTek MT2701 g3dsys clocks.
+
 config COMMON_CLK_MT2712
 	bool "Clock driver for MediaTek MT2712"
 	depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index b80eff2..844b55d 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_COMMON_CLK_MT2701) += clk-mt2701.o
 obj-$(CONFIG_COMMON_CLK_MT2701_AUDSYS) += clk-mt2701-aud.o
 obj-$(CONFIG_COMMON_CLK_MT2701_BDPSYS) += clk-mt2701-bdp.o
 obj-$(CONFIG_COMMON_CLK_MT2701_ETHSYS) += clk-mt2701-eth.o
+obj-$(CONFIG_COMMON_CLK_MT2701_G3DSYS) += clk-mt2701-g3d.o
 obj-$(CONFIG_COMMON_CLK_MT2701_HIFSYS) += clk-mt2701-hif.o
 obj-$(CONFIG_COMMON_CLK_MT2701_IMGSYS) += clk-mt2701-img.o
 obj-$(CONFIG_COMMON_CLK_MT2701_MMSYS) += clk-mt2701-mm.o
diff --git a/drivers/clk/mediatek/clk-mt2701-g3d.c b/drivers/clk/mediatek/clk-mt2701-g3d.c
new file mode 100644
index 0000000..1328c11
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt2701-g3d.c
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt2701-clk.h>
+
+#define GATE_G3D(_id, _name, _parent, _shift) {	\
+		.id = _id,				\
+		.name = _name,				\
+		.parent_name = _parent,			\
+		.regs = &g3d_cg_regs,			\
+		.shift = _shift,			\
+		.ops = &mtk_clk_gate_ops_setclr,	\
+	}
+
+static const struct mtk_gate_regs g3d_cg_regs = {
+	.sta_ofs = 0x0,
+	.set_ofs = 0x4,
+	.clr_ofs = 0x8,
+};
+
+static const struct mtk_gate g3d_clks[] = {
+	GATE_G3D(CLK_G3DSYS_CORE, "g3d_core", "mfg_sel", 0),
+};
+
+static int clk_mt2701_g3dsys_init(struct platform_device *pdev)
+{
+	struct clk_onecell_data *clk_data;
+	struct device_node *node = pdev->dev.of_node;
+	int r;
+
+	clk_data = mtk_alloc_clk_data(CLK_G3DSYS_NR);
+
+	mtk_clk_register_gates(node, g3d_clks, ARRAY_SIZE(g3d_clks),
+			       clk_data);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+	if (r)
+		dev_err(&pdev->dev,
+			"could not register clock provider: %s: %d\n",
+			pdev->name, r);
+
+	mtk_register_reset_controller(node, 1, 0xc);
+
+	return r;
+}
+
+static const struct of_device_id of_match_clk_mt2701_g3d[] = {
+	{
+		.compatible = "mediatek,mt2701-g3dsys",
+		.data = clk_mt2701_g3dsys_init,
+	}, {
+		/* sentinel */
+	}
+};
+
+static int clk_mt2701_g3d_probe(struct platform_device *pdev)
+{
+	int (*clk_init)(struct platform_device *);
+	int r;
+
+	clk_init = of_device_get_match_data(&pdev->dev);
+	if (!clk_init)
+		return -EINVAL;
+
+	r = clk_init(pdev);
+	if (r)
+		dev_err(&pdev->dev,
+			"could not register clock provider: %s: %d\n",
+			pdev->name, r);
+
+	return r;
+}
+
+static struct platform_driver clk_mt2701_g3d_drv = {
+	.probe = clk_mt2701_g3d_probe,
+	.driver = {
+		.name = "clk-mt2701-g3d",
+		.of_match_table = of_match_clk_mt2701_g3d,
+	},
+};
+
+builtin_platform_driver(clk_mt2701_g3d_drv);
-- 
2.7.4

[PATCH v2 5/6] clk: mediatek: add g3dsys support for MT2701 and MT7623

[sean.wang at mediatek.com]

From: Sean Wang <sean.wang@mediatek.com>

Add clock driver support for g3dsys on MT2701 and MT7623, which is
providing essential clock gate and reset controller to Mali-450.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 drivers/clk/mediatek/Kconfig          |  6 +++
 drivers/clk/mediatek/Makefile         |  1 +
 drivers/clk/mediatek/clk-mt2701-g3d.c | 95 +++++++++++++++++++++++++++++++++++
 3 files changed, 102 insertions(+)
 create mode 100644 drivers/clk/mediatek/clk-mt2701-g3d.c

diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
index 92afe59..3dd1dab 100644
--- a/drivers/clk/mediatek/Kconfig
+++ b/drivers/clk/mediatek/Kconfig
@@ -60,6 +60,12 @@ config COMMON_CLK_MT2701_AUDSYS
 	---help---
 	  This driver supports Mediatek MT2701 audsys clocks.
 
+config COMMON_CLK_MT2701_G3DSYS
+	bool "Clock driver for MediaTek MT2701 g3dsys"
+	depends on COMMON_CLK_MT2701
+	---help---
+	  This driver supports MediaTek MT2701 g3dsys clocks.
+
 config COMMON_CLK_MT2712
 	bool "Clock driver for MediaTek MT2712"
 	depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index b80eff2..844b55d 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_COMMON_CLK_MT2701) += clk-mt2701.o
 obj-$(CONFIG_COMMON_CLK_MT2701_AUDSYS) += clk-mt2701-aud.o
 obj-$(CONFIG_COMMON_CLK_MT2701_BDPSYS) += clk-mt2701-bdp.o
 obj-$(CONFIG_COMMON_CLK_MT2701_ETHSYS) += clk-mt2701-eth.o
+obj-$(CONFIG_COMMON_CLK_MT2701_G3DSYS) += clk-mt2701-g3d.o
 obj-$(CONFIG_COMMON_CLK_MT2701_HIFSYS) += clk-mt2701-hif.o
 obj-$(CONFIG_COMMON_CLK_MT2701_IMGSYS) += clk-mt2701-img.o
 obj-$(CONFIG_COMMON_CLK_MT2701_MMSYS) += clk-mt2701-mm.o
diff --git a/drivers/clk/mediatek/clk-mt2701-g3d.c b/drivers/clk/mediatek/clk-mt2701-g3d.c
new file mode 100644
index 0000000..1328c11
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt2701-g3d.c
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt2701-clk.h>
+
+#define GATE_G3D(_id, _name, _parent, _shift) {	\
+		.id = _id,				\
+		.name = _name,				\
+		.parent_name = _parent,			\
+		.regs = &g3d_cg_regs,			\
+		.shift = _shift,			\
+		.ops = &mtk_clk_gate_ops_setclr,	\
+	}
+
+static const struct mtk_gate_regs g3d_cg_regs = {
+	.sta_ofs = 0x0,
+	.set_ofs = 0x4,
+	.clr_ofs = 0x8,
+};
+
+static const struct mtk_gate g3d_clks[] = {
+	GATE_G3D(CLK_G3DSYS_CORE, "g3d_core", "mfg_sel", 0),
+};
+
+static int clk_mt2701_g3dsys_init(struct platform_device *pdev)
+{
+	struct clk_onecell_data *clk_data;
+	struct device_node *node = pdev->dev.of_node;
+	int r;
+
+	clk_data = mtk_alloc_clk_data(CLK_G3DSYS_NR);
+
+	mtk_clk_register_gates(node, g3d_clks, ARRAY_SIZE(g3d_clks),
+			       clk_data);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+	if (r)
+		dev_err(&pdev->dev,
+			"could not register clock provider: %s: %d\n",
+			pdev->name, r);
+
+	mtk_register_reset_controller(node, 1, 0xc);
+
+	return r;
+}
+
+static const struct of_device_id of_match_clk_mt2701_g3d[] = {
+	{
+		.compatible = "mediatek,mt2701-g3dsys",
+		.data = clk_mt2701_g3dsys_init,
+	}, {
+		/* sentinel */
+	}
+};
+
+static int clk_mt2701_g3d_probe(struct platform_device *pdev)
+{
+	int (*clk_init)(struct platform_device *);
+	int r;
+
+	clk_init = of_device_get_match_data(&pdev->dev);
+	if (!clk_init)
+		return -EINVAL;
+
+	r = clk_init(pdev);
+	if (r)
+		dev_err(&pdev->dev,
+			"could not register clock provider: %s: %d\n",
+			pdev->name, r);
+
+	return r;
+}
+
+static struct platform_driver clk_mt2701_g3d_drv = {
+	.probe = clk_mt2701_g3d_probe,
+	.driver = {
+		.name = "clk-mt2701-g3d",
+		.of_match_table = of_match_clk_mt2701_g3d,
+	},
+};
+
+builtin_platform_driver(clk_mt2701_g3d_drv);
-- 
2.7.4

[PATCH v2 6/6] arm: dts: mt7623: add Mali-450 and related device nodes

[sean.wang]

From: Sean Wang <sean.wang@mediatek.com>

Add nodes for Mali-450 device, g3dsys device providing required clock
gate and reset control and larb3 offering an arbiter through iommu for
controlling access to external memory requested from Mali-450.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 arch/arm/boot/dts/mt7623.dtsi  | 70 ++++++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/mt7623a.dtsi |  4 +++
 2 files changed, 74 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 59139dd..1cd8208 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -276,6 +276,17 @@
 		clock-names = "system-clk", "rtc-clk";
 	};
 
+	smi_common: smi@1000c000 {
+		compatible = "mediatek,mt7623-smi-common",
+			     "mediatek,mt2701-smi-common";
+		reg = <0 0x1000c000 0 0x1000>;
+		clocks = <&infracfg CLK_INFRA_SMI>,
+			 <&mmsys CLK_MM_SMI_COMMON>,
+			 <&infracfg CLK_INFRA_SMI>;
+		clock-names = "apb", "smi", "async";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
 	pwrap: pwrap@1000d000 {
 		compatible = "mediatek,mt7623-pwrap",
 			     "mediatek,mt2701-pwrap";
@@ -307,6 +318,17 @@
 		reg = <0 0x10200100 0 0x1c>;
 	};
 
+	iommu: iommu@10205000 {
+		compatible = "mediatek,mt7623-m4u",
+			     "mediatek,mt2701-m4u";
+		reg = <0 0x10205000 0 0x1000>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_M4U>;
+		clock-names = "bclk";
+		mediatek,larbs = <&larb3>;
+		#iommu-cells = <1>;
+	};
+
 	efuse: efuse@10206000 {
 		compatible = "mediatek,mt7623-efuse",
 			     "mediatek,mt8173-efuse";
@@ -682,6 +704,54 @@
 		status = "disabled";
 	};
 
+	g3dsys: clock-controller@13000000 {
+		compatible = "mediatek,mt7623-g3dsys",
+			     "mediatek,mt2701-g3dsys",
+			     "syscon";
+		reg = <0 0x13000000 0 0x200>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	larb3: larb@13010000 {
+		compatible = "mediatek,mt7623-smi-larb",
+			     "mediatek,mt2701-smi-larb";
+		reg = <0 0x13010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <3>;
+		clocks = <&clk26m>, <&clk26m>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_MFG>;
+	};
+
+	mali: gpu@13040000 {
+		compatible = "mediatek,mt7623-mali", "arm,mali-450";
+		reg = <0 0x13040000 0 0x30000>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 171 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 172 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 173 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 174 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 177 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1",
+				  "ppmmu1", "pp2", "ppmmu2", "pp";
+		clocks = <&topckgen CLK_TOP_MMPLL>,
+			 <&g3dsys CLK_G3DSYS_CORE>;
+		clock-names = "bus", "core";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_MFG>;
+		mediatek,larb = <&larb3>;
+		resets = <&g3dsys MT2701_G3DSYS_CORE_RST>;
+	};
+
+	mmsys: syscon@14000000 {
+		compatible = "mediatek,mt2701-mmsys", "syscon";
+		reg = <0 0x14000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
 	hifsys: syscon@1a000000 {
 		compatible = "mediatek,mt7623-hifsys",
 			     "mediatek,mt2701-hifsys",
diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi
index 0735a1fb8..a42fd46 100644
--- a/arch/arm/boot/dts/mt7623a.dtsi
+++ b/arch/arm/boot/dts/mt7623a.dtsi
@@ -21,6 +21,10 @@
 	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
 };
 
+&mali {
+	status = "disabled";
+};
+
 &nandc {
 	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
 };
-- 
2.7.4

[PATCH v2 6/6] arm: dts: mt7623: add Mali-450 and related device nodes

[sean.wang]

From: Sean Wang <sean.wang@mediatek.com>

Add nodes for Mali-450 device, g3dsys device providing required clock
gate and reset control and larb3 offering an arbiter through iommu for
controlling access to external memory requested from Mali-450.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 arch/arm/boot/dts/mt7623.dtsi  | 70 ++++++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/mt7623a.dtsi |  4 +++
 2 files changed, 74 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 59139dd..1cd8208 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -276,6 +276,17 @@
 		clock-names = "system-clk", "rtc-clk";
 	};
 
+	smi_common: smi@1000c000 {
+		compatible = "mediatek,mt7623-smi-common",
+			     "mediatek,mt2701-smi-common";
+		reg = <0 0x1000c000 0 0x1000>;
+		clocks = <&infracfg CLK_INFRA_SMI>,
+			 <&mmsys CLK_MM_SMI_COMMON>,
+			 <&infracfg CLK_INFRA_SMI>;
+		clock-names = "apb", "smi", "async";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
 	pwrap: pwrap@1000d000 {
 		compatible = "mediatek,mt7623-pwrap",
 			     "mediatek,mt2701-pwrap";
@@ -307,6 +318,17 @@
 		reg = <0 0x10200100 0 0x1c>;
 	};
 
+	iommu: iommu@10205000 {
+		compatible = "mediatek,mt7623-m4u",
+			     "mediatek,mt2701-m4u";
+		reg = <0 0x10205000 0 0x1000>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_M4U>;
+		clock-names = "bclk";
+		mediatek,larbs = <&larb3>;
+		#iommu-cells = <1>;
+	};
+
 	efuse: efuse@10206000 {
 		compatible = "mediatek,mt7623-efuse",
 			     "mediatek,mt8173-efuse";
@@ -682,6 +704,54 @@
 		status = "disabled";
 	};
 
+	g3dsys: clock-controller@13000000 {
+		compatible = "mediatek,mt7623-g3dsys",
+			     "mediatek,mt2701-g3dsys",
+			     "syscon";
+		reg = <0 0x13000000 0 0x200>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	larb3: larb@13010000 {
+		compatible = "mediatek,mt7623-smi-larb",
+			     "mediatek,mt2701-smi-larb";
+		reg = <0 0x13010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <3>;
+		clocks = <&clk26m>, <&clk26m>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_MFG>;
+	};
+
+	mali: gpu@13040000 {
+		compatible = "mediatek,mt7623-mali", "arm,mali-450";
+		reg = <0 0x13040000 0 0x30000>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 171 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 172 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 173 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 174 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 177 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1",
+				  "ppmmu1", "pp2", "ppmmu2", "pp";
+		clocks = <&topckgen CLK_TOP_MMPLL>,
+			 <&g3dsys CLK_G3DSYS_CORE>;
+		clock-names = "bus", "core";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_MFG>;
+		mediatek,larb = <&larb3>;
+		resets = <&g3dsys MT2701_G3DSYS_CORE_RST>;
+	};
+
+	mmsys: syscon@14000000 {
+		compatible = "mediatek,mt2701-mmsys", "syscon";
+		reg = <0 0x14000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
 	hifsys: syscon@1a000000 {
 		compatible = "mediatek,mt7623-hifsys",
 			     "mediatek,mt2701-hifsys",
diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi
index 0735a1fb8..a42fd46 100644
--- a/arch/arm/boot/dts/mt7623a.dtsi
+++ b/arch/arm/boot/dts/mt7623a.dtsi
@@ -21,6 +21,10 @@
 	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
 };
 
+&mali {
+	status = "disabled";
+};
+
 &nandc {
 	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
 };
-- 
2.7.4

[PATCH v2 6/6] arm: dts: mt7623: add Mali-450 and related device nodes

[sean.wang at mediatek.com]

From: Sean Wang <sean.wang@mediatek.com>

Add nodes for Mali-450 device, g3dsys device providing required clock
gate and reset control and larb3 offering an arbiter through iommu for
controlling access to external memory requested from Mali-450.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 arch/arm/boot/dts/mt7623.dtsi  | 70 ++++++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/mt7623a.dtsi |  4 +++
 2 files changed, 74 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 59139dd..1cd8208 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -276,6 +276,17 @@
 		clock-names = "system-clk", "rtc-clk";
 	};
 
+	smi_common: smi at 1000c000 {
+		compatible = "mediatek,mt7623-smi-common",
+			     "mediatek,mt2701-smi-common";
+		reg = <0 0x1000c000 0 0x1000>;
+		clocks = <&infracfg CLK_INFRA_SMI>,
+			 <&mmsys CLK_MM_SMI_COMMON>,
+			 <&infracfg CLK_INFRA_SMI>;
+		clock-names = "apb", "smi", "async";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
 	pwrap: pwrap at 1000d000 {
 		compatible = "mediatek,mt7623-pwrap",
 			     "mediatek,mt2701-pwrap";
@@ -307,6 +318,17 @@
 		reg = <0 0x10200100 0 0x1c>;
 	};
 
+	iommu: iommu at 10205000 {
+		compatible = "mediatek,mt7623-m4u",
+			     "mediatek,mt2701-m4u";
+		reg = <0 0x10205000 0 0x1000>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_M4U>;
+		clock-names = "bclk";
+		mediatek,larbs = <&larb3>;
+		#iommu-cells = <1>;
+	};
+
 	efuse: efuse at 10206000 {
 		compatible = "mediatek,mt7623-efuse",
 			     "mediatek,mt8173-efuse";
@@ -682,6 +704,54 @@
 		status = "disabled";
 	};
 
+	g3dsys: clock-controller at 13000000 {
+		compatible = "mediatek,mt7623-g3dsys",
+			     "mediatek,mt2701-g3dsys",
+			     "syscon";
+		reg = <0 0x13000000 0 0x200>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	larb3: larb at 13010000 {
+		compatible = "mediatek,mt7623-smi-larb",
+			     "mediatek,mt2701-smi-larb";
+		reg = <0 0x13010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <3>;
+		clocks = <&clk26m>, <&clk26m>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_MFG>;
+	};
+
+	mali: gpu at 13040000 {
+		compatible = "mediatek,mt7623-mali", "arm,mali-450";
+		reg = <0 0x13040000 0 0x30000>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 171 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 172 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 173 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 174 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 177 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1",
+				  "ppmmu1", "pp2", "ppmmu2", "pp";
+		clocks = <&topckgen CLK_TOP_MMPLL>,
+			 <&g3dsys CLK_G3DSYS_CORE>;
+		clock-names = "bus", "core";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_MFG>;
+		mediatek,larb = <&larb3>;
+		resets = <&g3dsys MT2701_G3DSYS_CORE_RST>;
+	};
+
+	mmsys: syscon at 14000000 {
+		compatible = "mediatek,mt2701-mmsys", "syscon";
+		reg = <0 0x14000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
 	hifsys: syscon at 1a000000 {
 		compatible = "mediatek,mt7623-hifsys",
 			     "mediatek,mt2701-hifsys",
diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi
index 0735a1fb8..a42fd46 100644
--- a/arch/arm/boot/dts/mt7623a.dtsi
+++ b/arch/arm/boot/dts/mt7623a.dtsi
@@ -21,6 +21,10 @@
 	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
 };
 
+&mali {
+	status = "disabled";
+};
+
 &nandc {
 	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
 };
-- 
2.7.4

Re: [PATCH v2 2/6] dt-bindings: clock: mediatek: add g3dsys bindings

[Rob Herring]

On Fri, Apr 27, 2018 at 04:14:43PM +0800, sean.wang@mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Add bindings to g3dsys providing necessary clock and reset control to
> Mali-450.
> 
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---
>  .../bindings/arm/mediatek/mediatek,g3dsys.txt      | 30 ++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH v2 2/6] dt-bindings: clock: mediatek: add g3dsys bindings

[Rob Herring]

On Fri, Apr 27, 2018 at 04:14:43PM +0800, sean.wang at mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Add bindings to g3dsys providing necessary clock and reset control to
> Mali-450.
> 
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---
>  .../bindings/arm/mediatek/mediatek,g3dsys.txt      | 30 ++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 3/6] dt-bindings: clock: mediatek: add entry for Mali-450 node to refer

[Rob Herring]

On Fri, Apr 27, 2018 at 04:14:44PM +0800, sean.wang@mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Just add binding for a required clock referenced by Mali-450 on MT7623
> or MT2701 SoC.
> 
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---
>  include/dt-bindings/clock/mt2701-clk.h | 4 ++++
>  1 file changed, 4 insertions(+)

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH v2 3/6] dt-bindings: clock: mediatek: add entry for Mali-450 node to refer

[Rob Herring]

On Fri, Apr 27, 2018 at 04:14:44PM +0800, sean.wang at mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Just add binding for a required clock referenced by Mali-450 on MT7623
> or MT2701 SoC.
> 
> Cc: devicetree at vger.kernel.org
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---
>  include/dt-bindings/clock/mt2701-clk.h | 4 ++++
>  1 file changed, 4 insertions(+)

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 4/6] dt-bindings: reset: mediatek: add entry for Mali-450 node to refer

[Rob Herring]

On Fri, Apr 27, 2018 at 04:14:45PM +0800, sean.wang@mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Just add binding for a required reset referenced by Mali-450 on MT7623
> or MT2701 SoC.
> 
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---
>  include/dt-bindings/reset/mt2701-resets.h | 3 +++
>  1 file changed, 3 insertions(+)

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH v2 4/6] dt-bindings: reset: mediatek: add entry for Mali-450 node to refer

[Rob Herring]

On Fri, Apr 27, 2018 at 04:14:45PM +0800, sean.wang at mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Just add binding for a required reset referenced by Mali-450 on MT7623
> or MT2701 SoC.
> 
> Cc: devicetree at vger.kernel.org
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---
>  include/dt-bindings/reset/mt2701-resets.h | 3 +++
>  1 file changed, 3 insertions(+)

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 2/6] dt-bindings: clock: mediatek: add g3dsys bindings

[Stephen Boyd]

Quoting sean.wang@mediatek.com (2018-04-27 01:14:43)
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Add bindings to g3dsys providing necessary clock and reset control to
> Mali-450.
> 
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---

Applied to clk-next

Re: [PATCH v2 2/6] dt-bindings: clock: mediatek: add g3dsys bindings

[Stephen Boyd]

Quoting sean.wang@mediatek.com (2018-04-27 01:14:43)
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Add bindings to g3dsys providing necessary clock and reset control to
> Mali-450.
> 
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---

Applied to clk-next

Re: [PATCH v2 2/6] dt-bindings: clock: mediatek: add g3dsys bindings

[Stephen Boyd]

Quoting sean.wang@mediatek.com (2018-04-27 01:14:43)
> From: Sean Wang <sean.wang@mediatek.com>
> =

> Add bindings to g3dsys providing necessary clock and reset control to
> Mali-450.
> =

> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---

Applied to clk-next

[PATCH v2 2/6] dt-bindings: clock: mediatek: add g3dsys bindings

[Stephen Boyd]

Quoting sean.wang at mediatek.com (2018-04-27 01:14:43)
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Add bindings to g3dsys providing necessary clock and reset control to
> Mali-450.
> 
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---

Applied to clk-next

Re: [PATCH v2 3/6] dt-bindings: clock: mediatek: add entry for Mali-450 node to refer

[Stephen Boyd]

Quoting sean.wang@mediatek.com (2018-04-27 01:14:44)
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Just add binding for a required clock referenced by Mali-450 on MT7623
> or MT2701 SoC.
> 
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---

Applied to clk-next

Re: [PATCH v2 3/6] dt-bindings: clock: mediatek: add entry for Mali-450 node to refer

[Stephen Boyd]

Quoting sean.wang@mediatek.com (2018-04-27 01:14:44)
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Just add binding for a required clock referenced by Mali-450 on MT7623
> or MT2701 SoC.
> 
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---

Applied to clk-next

Re: [PATCH v2 3/6] dt-bindings: clock: mediatek: add entry for Mali-450 node to refer

[Stephen Boyd]

Quoting sean.wang@mediatek.com (2018-04-27 01:14:44)
> From: Sean Wang <sean.wang@mediatek.com>
> =

> Just add binding for a required clock referenced by Mali-450 on MT7623
> or MT2701 SoC.
> =

> Cc: devicetree@vger.kernel.org
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---

Applied to clk-next

[PATCH v2 3/6] dt-bindings: clock: mediatek: add entry for Mali-450 node to refer

[Stephen Boyd]

Quoting sean.wang at mediatek.com (2018-04-27 01:14:44)
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Just add binding for a required clock referenced by Mali-450 on MT7623
> or MT2701 SoC.
> 
> Cc: devicetree at vger.kernel.org
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---

Applied to clk-next

Re: [PATCH v2 4/6] dt-bindings: reset: mediatek: add entry for Mali-450 node to refer

[Stephen Boyd]

Quoting sean.wang@mediatek.com (2018-04-27 01:14:45)
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Just add binding for a required reset referenced by Mali-450 on MT7623
> or MT2701 SoC.
> 
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---

Applied to clk-next

Re: [PATCH v2 4/6] dt-bindings: reset: mediatek: add entry for Mali-450 node to refer

[Stephen Boyd]

Quoting sean.wang@mediatek.com (2018-04-27 01:14:45)
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Just add binding for a required reset referenced by Mali-450 on MT7623
> or MT2701 SoC.
> 
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---

Applied to clk-next

Re: [PATCH v2 4/6] dt-bindings: reset: mediatek: add entry for Mali-450 node to refer

[Stephen Boyd]

Quoting sean.wang@mediatek.com (2018-04-27 01:14:45)
> From: Sean Wang <sean.wang@mediatek.com>
> =

> Just add binding for a required reset referenced by Mali-450 on MT7623
> or MT2701 SoC.
> =

> Cc: devicetree@vger.kernel.org
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---

Applied to clk-next

[PATCH v2 4/6] dt-bindings: reset: mediatek: add entry for Mali-450 node to refer

[Stephen Boyd]

Quoting sean.wang at mediatek.com (2018-04-27 01:14:45)
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Just add binding for a required reset referenced by Mali-450 on MT7623
> or MT2701 SoC.
> 
> Cc: devicetree at vger.kernel.org
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---

Applied to clk-next

Re: [PATCH v2 5/6] clk: mediatek: add g3dsys support for MT2701 and MT7623

[Stephen Boyd]

Quoting sean.wang@mediatek.com (2018-04-27 01:14:46)
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Add clock driver support for g3dsys on MT2701 and MT7623, which is
> providing essential clock gate and reset controller to Mali-450.
> 
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---

Applied to clk-next

Re: [PATCH v2 5/6] clk: mediatek: add g3dsys support for MT2701 and MT7623

[Stephen Boyd]

Quoting sean.wang@mediatek.com (2018-04-27 01:14:46)
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Add clock driver support for g3dsys on MT2701 and MT7623, which is
> providing essential clock gate and reset controller to Mali-450.
> 
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---

Applied to clk-next

Re: [PATCH v2 5/6] clk: mediatek: add g3dsys support for MT2701 and MT7623

[Stephen Boyd]

Quoting sean.wang@mediatek.com (2018-04-27 01:14:46)
> From: Sean Wang <sean.wang@mediatek.com>
> =

> Add clock driver support for g3dsys on MT2701 and MT7623, which is
> providing essential clock gate and reset controller to Mali-450.
> =

> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---

Applied to clk-next

[PATCH v2 5/6] clk: mediatek: add g3dsys support for MT2701 and MT7623

[Stephen Boyd]

Quoting sean.wang at mediatek.com (2018-04-27 01:14:46)
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Add clock driver support for g3dsys on MT2701 and MT7623, which is
> providing essential clock gate and reset controller to Mali-450.
> 
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---

Applied to clk-next

Re: [PATCH v2 1/6] dt-bindings: gpu: mali-utgard: add mediatek,mt7623-mali compatible

[Matthias Brugger]

On 27/04/18 10:14, sean.wang@mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
> 
> The MediaTek MT7623 SoC contains a Mali-450, so add a compatible for it
> and define its own vendor-specific properties.
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---

Hi Rob,

Any comments regarding this patch?

Regards,
Matthias

>  Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
> index 99d1c0a..656068f 100644
> --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
> @@ -19,6 +19,7 @@ Required properties:
>        + rockchip,rk3228-mali
>        + rockchip,rk3328-mali
>        + stericsson,db8500-mali
> +      + mediatek,mt7623-mali
>  
>    - reg: Physical base address and length of the GPU registers
>  
> @@ -89,6 +90,14 @@ to specify one more vendor-specific compatible, among:
>        * interrupt-names and interrupts:
>          + combined: combined interrupt of all of the above lines
>  
> +  - mediatek,mt7623-mali
> +     Required properties:
> +      * resets: phandle to the reset line for the GPU
> +      * mediatek,larb: phandle pointed to the local arbiter used to control the
> +	access to external memory on the SoC.
> +	see Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> +	for details
> +
>  Example:
>  
>  mali: gpu@1c40000 {
> 

[PATCH v2 1/6] dt-bindings: gpu: mali-utgard: add mediatek,mt7623-mali compatible

[Matthias Brugger]

On 27/04/18 10:14, sean.wang at mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
> 
> The MediaTek MT7623 SoC contains a Mali-450, so add a compatible for it
> and define its own vendor-specific properties.
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---

Hi Rob,

Any comments regarding this patch?

Regards,
Matthias

>  Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
> index 99d1c0a..656068f 100644
> --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
> @@ -19,6 +19,7 @@ Required properties:
>        + rockchip,rk3228-mali
>        + rockchip,rk3328-mali
>        + stericsson,db8500-mali
> +      + mediatek,mt7623-mali
>  
>    - reg: Physical base address and length of the GPU registers
>  
> @@ -89,6 +90,14 @@ to specify one more vendor-specific compatible, among:
>        * interrupt-names and interrupts:
>          + combined: combined interrupt of all of the above lines
>  
> +  - mediatek,mt7623-mali
> +     Required properties:
> +      * resets: phandle to the reset line for the GPU
> +      * mediatek,larb: phandle pointed to the local arbiter used to control the
> +	access to external memory on the SoC.
> +	see Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> +	for details
> +
>  Example:
>  
>  mali: gpu at 1c40000 {
> 

Re: [PATCH v2 1/6] dt-bindings: gpu: mali-utgard: add mediatek,mt7623-mali compatible

[Sean Wang]

On Mon, 2018-06-25 at 17:14 +0200, Matthias Brugger wrote:
> 
> On 27/04/18 10:14, sean.wang@mediatek.com wrote:
> > From: Sean Wang <sean.wang@mediatek.com>
> > 
> > The MediaTek MT7623 SoC contains a Mali-450, so add a compatible for it
> > and define its own vendor-specific properties.
> > 
> > Reviewed-by: Rob Herring <robh@kernel.org>
> > Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> > ---
> 
> Hi Rob,
> 
> Any comments regarding this patch?
> 
> Regards,
> Matthias
> 

Hi, Matthias

I've already got a Reviewed-by tag from Rob.

Is it possible that this patch go through your tree ?

	Sean

> >  Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt | 9 +++++++++
> >  1 file changed, 9 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
> > index 99d1c0a..656068f 100644
> > --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
> > +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
> > @@ -19,6 +19,7 @@ Required properties:
> >        + rockchip,rk3228-mali
> >        + rockchip,rk3328-mali
> >        + stericsson,db8500-mali
> > +      + mediatek,mt7623-mali
> >  
> >    - reg: Physical base address and length of the GPU registers
> >  
> > @@ -89,6 +90,14 @@ to specify one more vendor-specific compatible, among:
> >        * interrupt-names and interrupts:
> >          + combined: combined interrupt of all of the above lines
> >  
> > +  - mediatek,mt7623-mali
> > +     Required properties:
> > +      * resets: phandle to the reset line for the GPU
> > +      * mediatek,larb: phandle pointed to the local arbiter used to control the
> > +	access to external memory on the SoC.
> > +	see Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> > +	for details
> > +
> >  Example:
> >  
> >  mali: gpu@1c40000 {
> > 

Re: [PATCH v2 1/6] dt-bindings: gpu: mali-utgard: add mediatek,mt7623-mali compatible

[Sean Wang]

On Mon, 2018-06-25 at 17:14 +0200, Matthias Brugger wrote:
> 
> On 27/04/18 10:14, sean.wang@mediatek.com wrote:
> > From: Sean Wang <sean.wang@mediatek.com>
> > 
> > The MediaTek MT7623 SoC contains a Mali-450, so add a compatible for it
> > and define its own vendor-specific properties.
> > 
> > Reviewed-by: Rob Herring <robh@kernel.org>
> > Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> > ---
> 
> Hi Rob,
> 
> Any comments regarding this patch?
> 
> Regards,
> Matthias
> 

Hi, Matthias

I've already got a Reviewed-by tag from Rob.

Is it possible that this patch go through your tree ?

	Sean

> >  Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt | 9 +++++++++
> >  1 file changed, 9 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
> > index 99d1c0a..656068f 100644
> > --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
> > +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
> > @@ -19,6 +19,7 @@ Required properties:
> >        + rockchip,rk3228-mali
> >        + rockchip,rk3328-mali
> >        + stericsson,db8500-mali
> > +      + mediatek,mt7623-mali
> >  
> >    - reg: Physical base address and length of the GPU registers
> >  
> > @@ -89,6 +90,14 @@ to specify one more vendor-specific compatible, among:
> >        * interrupt-names and interrupts:
> >          + combined: combined interrupt of all of the above lines
> >  
> > +  - mediatek,mt7623-mali
> > +     Required properties:
> > +      * resets: phandle to the reset line for the GPU
> > +      * mediatek,larb: phandle pointed to the local arbiter used to control the
> > +	access to external memory on the SoC.
> > +	see Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> > +	for details
> > +
> >  Example:
> >  
> >  mali: gpu@1c40000 {
> > 

[PATCH v2 1/6] dt-bindings: gpu: mali-utgard: add mediatek,mt7623-mali compatible

[Sean Wang]

On Mon, 2018-06-25 at 17:14 +0200, Matthias Brugger wrote:
> 
> On 27/04/18 10:14, sean.wang at mediatek.com wrote:
> > From: Sean Wang <sean.wang@mediatek.com>
> > 
> > The MediaTek MT7623 SoC contains a Mali-450, so add a compatible for it
> > and define its own vendor-specific properties.
> > 
> > Reviewed-by: Rob Herring <robh@kernel.org>
> > Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> > ---
> 
> Hi Rob,
> 
> Any comments regarding this patch?
> 
> Regards,
> Matthias
> 

Hi, Matthias

I've already got a Reviewed-by tag from Rob.

Is it possible that this patch go through your tree ?

	Sean

> >  Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt | 9 +++++++++
> >  1 file changed, 9 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
> > index 99d1c0a..656068f 100644
> > --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
> > +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
> > @@ -19,6 +19,7 @@ Required properties:
> >        + rockchip,rk3228-mali
> >        + rockchip,rk3328-mali
> >        + stericsson,db8500-mali
> > +      + mediatek,mt7623-mali
> >  
> >    - reg: Physical base address and length of the GPU registers
> >  
> > @@ -89,6 +90,14 @@ to specify one more vendor-specific compatible, among:
> >        * interrupt-names and interrupts:
> >          + combined: combined interrupt of all of the above lines
> >  
> > +  - mediatek,mt7623-mali
> > +     Required properties:
> > +      * resets: phandle to the reset line for the GPU
> > +      * mediatek,larb: phandle pointed to the local arbiter used to control the
> > +	access to external memory on the SoC.
> > +	see Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> > +	for details
> > +
> >  Example:
> >  
> >  mali: gpu at 1c40000 {
> > 

Re: [PATCH v2 1/6] dt-bindings: gpu: mali-utgard: add mediatek,mt7623-mali compatible

[Matthias Brugger]

On 27/06/18 10:52, Sean Wang wrote:
> On Mon, 2018-06-25 at 17:14 +0200, Matthias Brugger wrote:
>>
>> On 27/04/18 10:14, sean.wang@mediatek.com wrote:
>>> From: Sean Wang <sean.wang@mediatek.com>
>>>
>>> The MediaTek MT7623 SoC contains a Mali-450, so add a compatible for it
>>> and define its own vendor-specific properties.
>>>
>>> Reviewed-by: Rob Herring <robh@kernel.org>
>>> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
>>> ---
>>
>> Hi Rob,
>>
>> Any comments regarding this patch?
>>
>> Regards,
>> Matthias
>>
> 
> Hi, Matthias
> 
> I've already got a Reviewed-by tag from Rob.
> 
> Is it possible that this patch go through your tree ?
> 

Basically yes, I just want to get the mmsys problem fixed first.
Sorry I know it is on my plate. I'll try to send a new version this week.

Regards,
Matthias

> 	Sean
> 
>>>  Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt | 9 +++++++++
>>>  1 file changed, 9 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
>>> index 99d1c0a..656068f 100644
>>> --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
>>> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
>>> @@ -19,6 +19,7 @@ Required properties:
>>>        + rockchip,rk3228-mali
>>>        + rockchip,rk3328-mali
>>>        + stericsson,db8500-mali
>>> +      + mediatek,mt7623-mali
>>>  
>>>    - reg: Physical base address and length of the GPU registers
>>>  
>>> @@ -89,6 +90,14 @@ to specify one more vendor-specific compatible, among:
>>>        * interrupt-names and interrupts:
>>>          + combined: combined interrupt of all of the above lines
>>>  
>>> +  - mediatek,mt7623-mali
>>> +     Required properties:
>>> +      * resets: phandle to the reset line for the GPU
>>> +      * mediatek,larb: phandle pointed to the local arbiter used to control the
>>> +	access to external memory on the SoC.
>>> +	see Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
>>> +	for details
>>> +
>>>  Example:
>>>  
>>>  mali: gpu@1c40000 {
>>>
> 
> 

[PATCH v2 1/6] dt-bindings: gpu: mali-utgard: add mediatek,mt7623-mali compatible

[Matthias Brugger]

On 27/06/18 10:52, Sean Wang wrote:
> On Mon, 2018-06-25 at 17:14 +0200, Matthias Brugger wrote:
>>
>> On 27/04/18 10:14, sean.wang at mediatek.com wrote:
>>> From: Sean Wang <sean.wang@mediatek.com>
>>>
>>> The MediaTek MT7623 SoC contains a Mali-450, so add a compatible for it
>>> and define its own vendor-specific properties.
>>>
>>> Reviewed-by: Rob Herring <robh@kernel.org>
>>> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
>>> ---
>>
>> Hi Rob,
>>
>> Any comments regarding this patch?
>>
>> Regards,
>> Matthias
>>
> 
> Hi, Matthias
> 
> I've already got a Reviewed-by tag from Rob.
> 
> Is it possible that this patch go through your tree ?
> 

Basically yes, I just want to get the mmsys problem fixed first.
Sorry I know it is on my plate. I'll try to send a new version this week.

Regards,
Matthias

> 	Sean
> 
>>>  Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt | 9 +++++++++
>>>  1 file changed, 9 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
>>> index 99d1c0a..656068f 100644
>>> --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
>>> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
>>> @@ -19,6 +19,7 @@ Required properties:
>>>        + rockchip,rk3228-mali
>>>        + rockchip,rk3328-mali
>>>        + stericsson,db8500-mali
>>> +      + mediatek,mt7623-mali
>>>  
>>>    - reg: Physical base address and length of the GPU registers
>>>  
>>> @@ -89,6 +90,14 @@ to specify one more vendor-specific compatible, among:
>>>        * interrupt-names and interrupts:
>>>          + combined: combined interrupt of all of the above lines
>>>  
>>> +  - mediatek,mt7623-mali
>>> +     Required properties:
>>> +      * resets: phandle to the reset line for the GPU
>>> +      * mediatek,larb: phandle pointed to the local arbiter used to control the
>>> +	access to external memory on the SoC.
>>> +	see Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
>>> +	for details
>>> +
>>>  Example:
>>>  
>>>  mali: gpu at 1c40000 {
>>>
> 
>