* [PATCH v3 2/2] hwmon: (nct7802) Make temperature sensors configurable.
2021-10-09 2:44 [PATCH v3 1/2] dt-bindings: hwmon: Add nct7802 bindings Oskar Senft
@ 2021-10-09 2:44 ` Oskar Senft
2021-10-09 6:38 ` [PATCH v3 1/2] dt-bindings: hwmon: Add nct7802 bindings Guenter Roeck
1 sibling, 0 replies; 4+ messages in thread
From: Oskar Senft @ 2021-10-09 2:44 UTC (permalink / raw)
To: Jean Delvare, Guenter Roeck, Rob Herring, linux-hwmon,
linux-kernel, devicetree
Cc: Oskar Senft
This change allows LTD and RTD inputs to be configured via
device tree bindings. If the DT bindings are not present,
the input configuration is not modified and left at HW
defaults.
Signed-off-by: Oskar Senft <osk@google.com>
---
drivers/hwmon/nct7802.c | 160 ++++++++++++++++++++++++++++++++++++----
1 file changed, 145 insertions(+), 15 deletions(-)
diff --git a/drivers/hwmon/nct7802.c b/drivers/hwmon/nct7802.c
index 604af2f6103a..515c081c2506 100644
--- a/drivers/hwmon/nct7802.c
+++ b/drivers/hwmon/nct7802.c
@@ -51,6 +51,23 @@ static const u8 REG_VOLTAGE_LIMIT_MSB_SHIFT[2][5] = {
#define REG_CHIP_ID 0xfe
#define REG_VERSION_ID 0xff
+/*
+ * Resistance temperature detector (RTD) modes according to 7.2.32 Mode
+ * Selection Register
+ */
+#define RTD_MODE_CURRENT 0x1
+#define RTD_MODE_THERMISTOR 0x2
+#define RTD_MODE_VOLTAGE 0x3
+
+#define MODE_RTD_MASK 0x3
+#define MODE_LTD_EN 0x40
+
+/*
+ * Bit offset for sensors modes in REG_MODE.
+ * Valid for index 0..2, indicating RTD1..3.
+ */
+#define MODE_BIT_OFFSET_RTD(index) ((index) * 2)
+
/*
* Data structures and manipulation thereof
*/
@@ -74,7 +91,9 @@ static ssize_t temp_type_show(struct device *dev,
if (ret < 0)
return ret;
- return sprintf(buf, "%u\n", (mode >> (2 * sattr->index) & 3) + 2);
+ return sprintf(buf, "%u\n",
+ ((mode >> MODE_BIT_OFFSET_RTD(sattr->index)) &
+ MODE_RTD_MASK) + 2);
}
static ssize_t temp_type_store(struct device *dev,
@@ -94,7 +113,8 @@ static ssize_t temp_type_store(struct device *dev,
if (type < 3 || type > 4)
return -EINVAL;
err = regmap_update_bits(data->regmap, REG_MODE,
- 3 << 2 * sattr->index, (type - 2) << 2 * sattr->index);
+ MODE_RTD_MASK << MODE_BIT_OFFSET_RTD(sattr->index),
+ (type - 2) << MODE_BIT_OFFSET_RTD(sattr->index));
return err ? : count;
}
@@ -682,24 +702,24 @@ static umode_t nct7802_temp_is_visible(struct kobject *kobj,
struct device *dev = kobj_to_dev(kobj);
struct nct7802_data *data = dev_get_drvdata(dev);
unsigned int reg;
+ unsigned int rtd_mode;
int err;
err = regmap_read(data->regmap, REG_MODE, ®);
if (err < 0)
return 0;
- if (index < 10 &&
- (reg & 03) != 0x01 && (reg & 0x03) != 0x02) /* RD1 */
+ rtd_mode = (reg >> MODE_BIT_OFFSET_RTD(index / 10)) & MODE_RTD_MASK;
+ if (index >= 0 && index < 20 && /* RD1, RD 2*/
+ rtd_mode != 0x01 && rtd_mode != 0x02)
return 0;
- if (index >= 10 && index < 20 &&
- (reg & 0x0c) != 0x04 && (reg & 0x0c) != 0x08) /* RD2 */
- return 0;
- if (index >= 20 && index < 30 && (reg & 0x30) != 0x20) /* RD3 */
+ if (index >= 20 && index < 30 && rtd_mode != 0x02) /* RD3 */
return 0;
- if (index >= 30 && index < 38) /* local */
- return attr->mode;
+ if (index >= 30 && index < 38 && /* local */
+ (reg & MODE_LTD_EN) != MODE_LTD_EN)
+ return 0;
err = regmap_read(data->regmap, REG_PECI_ENABLE, ®);
if (err < 0)
@@ -1038,7 +1058,118 @@ static const struct regmap_config nct7802_regmap_config = {
.volatile_reg = nct7802_regmap_is_volatile,
};
-static int nct7802_init_chip(struct nct7802_data *data)
+static bool nct7802_get_input_config(struct device *dev,
+ struct device_node *input, u8 *mode_mask, u8 *mode_val)
+{
+ u32 reg;
+ const char *type_str, *md_str;
+ u8 md;
+
+ if (!input->name || of_node_cmp(input->name, "input"))
+ return false;
+
+ if (of_property_read_u32(input, "reg", ®)) {
+ dev_err(dev, "Could not read reg value for '%s'\n",
+ input->full_name);
+ return false;
+ }
+
+ if (reg > 3) {
+ dev_err(dev,
+ "Invalid reg (%u) in '%s'\n", reg, input->full_name);
+ return false;
+ }
+
+ if (reg == 0) {
+ if (!of_device_is_available(input))
+ *mode_val &= ~MODE_LTD_EN;
+ else
+ *mode_val |= MODE_LTD_EN;
+ *mode_mask |= MODE_LTD_EN;
+ return true;
+ }
+
+ if (reg >= 1 && reg <= 3 && !of_device_is_available(input)) {
+ *mode_val &= ~(MODE_RTD_MASK
+ << MODE_BIT_OFFSET_RTD(reg-1));
+ *mode_mask |= MODE_RTD_MASK
+ << MODE_BIT_OFFSET_RTD(reg-1);
+ return true;
+ }
+
+ if (of_property_read_string(input, "sensor-type", &type_str)) {
+ dev_err(dev, "No type for '%s'\n", input->full_name);
+ return false;
+ }
+
+ if (!strcmp(type_str, "voltage")) {
+ *mode_val |= (RTD_MODE_VOLTAGE & MODE_RTD_MASK)
+ << MODE_BIT_OFFSET_RTD(reg-1);
+ *mode_mask |= MODE_RTD_MASK
+ << MODE_BIT_OFFSET_RTD(reg-1);
+ return true;
+ }
+
+ if (strcmp(type_str, "temperature")) {
+ dev_err(dev, "Invalid type '%s' for '%s'\n", type_str,
+ input->full_name);
+ return false;
+ }
+
+ if (reg == 3) {
+ /* RTD3 only supports thermistor mode */
+ md = RTD_MODE_THERMISTOR;
+ } else {
+ if (of_property_read_string(input, "temperature-mode",
+ &md_str)) {
+ dev_err(dev, "No mode for '%s'\n", input->full_name);
+ return false;
+ }
+
+ if (!strcmp(md_str, "thermal-diode"))
+ md = RTD_MODE_CURRENT;
+ else if (!strcmp(md_str, "thermistor"))
+ md = RTD_MODE_THERMISTOR;
+ else {
+ dev_err(dev, "Invalid mode '%s' for '%s'\n", md_str,
+ input->full_name);
+ return false;
+ }
+ }
+
+ *mode_val |= (md & MODE_RTD_MASK)
+ << MODE_BIT_OFFSET_RTD(reg-1);
+ *mode_mask |= MODE_RTD_MASK
+ << MODE_BIT_OFFSET_RTD(reg-1);
+
+ return true;
+}
+
+static int nct7802_configure_inputs(struct device *dev,
+ struct nct7802_data *data)
+{
+ bool found_input_config = false;
+ u8 mode_mask = 0, mode_val = 0;
+ struct device_node *input;
+
+ if (dev->of_node) {
+ for_each_child_of_node(dev->of_node, input) {
+ if (nct7802_get_input_config(dev, input, &mode_mask,
+ &mode_val))
+ found_input_config = true;
+ }
+ }
+
+ if (!found_input_config) {
+ /* Enable local temperature sensor by default */
+ mode_val |= MODE_LTD_EN;
+ mode_mask |= MODE_LTD_EN;
+ }
+
+ return regmap_update_bits(data->regmap, REG_MODE, mode_mask, mode_val);
+}
+
+static int nct7802_init_chip(struct device *dev, struct nct7802_data *data)
{
int err;
@@ -1047,12 +1178,11 @@ static int nct7802_init_chip(struct nct7802_data *data)
if (err)
return err;
- /* Enable local temperature sensor */
- err = regmap_update_bits(data->regmap, REG_MODE, 0x40, 0x40);
+ err = nct7802_configure_inputs(dev, data);
if (err)
return err;
- /* Enable Vcore and VCC voltage monitoring */
+ /* Enable Vcore and VCC voltage monit, struct nct7802_data *dataoring */
return regmap_update_bits(data->regmap, REG_VMON_ENABLE, 0x03, 0x03);
}
@@ -1074,7 +1204,7 @@ static int nct7802_probe(struct i2c_client *client)
mutex_init(&data->access_lock);
mutex_init(&data->in_alarm_lock);
- ret = nct7802_init_chip(data);
+ ret = nct7802_init_chip(dev, data);
if (ret < 0)
return ret;
--
2.33.0.882.g93a45727a2-goog
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v3 1/2] dt-bindings: hwmon: Add nct7802 bindings
2021-10-09 2:44 [PATCH v3 1/2] dt-bindings: hwmon: Add nct7802 bindings Oskar Senft
2021-10-09 2:44 ` [PATCH v3 2/2] hwmon: (nct7802) Make temperature sensors configurable Oskar Senft
@ 2021-10-09 6:38 ` Guenter Roeck
2021-10-09 11:57 ` Oskar Senft
1 sibling, 1 reply; 4+ messages in thread
From: Guenter Roeck @ 2021-10-09 6:38 UTC (permalink / raw)
To: Oskar Senft, Jean Delvare, Rob Herring, linux-hwmon,
linux-kernel, devicetree
Hi Oskar,
On 10/8/21 7:44 PM, Oskar Senft wrote:
> Document bindings for the Nuvoton NCT7802Y driver.
>
> Signed-off-by: Oskar Senft <osk@google.com>
Please pdon't expect from reviewers to figure out what changed
between versions and provide change logs.
Thanks,
Guenter
> ---
> .../bindings/hwmon/nuvoton,nct7802.yaml | 142 ++++++++++++++++++
> 1 file changed, 142 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml
>
> diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml
> new file mode 100644
> index 000000000000..a97b89d0d197
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml
> @@ -0,0 +1,142 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +
> +$id: http://devicetree.org/schemas/hwmon/nuvoton,nct7802.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Nuvoton NCT7802Y Hardware Monitoring IC
> +
> +maintainers:
> + - Guenter Roeck <linux@roeck-us.net>
> +
> +description: |
> + The NCT7802Y is a hardware monitor IC which supports one on-die and up to
> + 5 remote temperature sensors with SMBus interface.
> +
> + Datasheets:
> + https://www.nuvoton.com/export/resource-files/Nuvoton_NCT7802Y_Datasheet_V12.pdf
> +
> +properties:
> + compatible:
> + enum:
> + - nuvoton,nct7802
> +
> + reg:
> + maxItems: 1
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + input@0:
> + type: object
> + description: Local Temperature Sensor ("LTD")
> + properties:
> + reg:
> + const: 0
> + required:
> + - reg
> +
> + input@1:
> + type: object
> + description: Remote Temperature Sensor or Voltage Sensor ("RTD1")
> + properties:
> + reg:
> + const: 1
> + sensor-type:
> + items:
> + - enum:
> + - temperature
> + - voltage
> + temperature-mode:
> + items:
> + - enum:
> + - thermistor
> + - thermal-diode
> + required:
> + - reg
> + - sensor-type
> +
> + input@2:
> + type: object
> + description: Remote Temperature Sensor or Voltage Sensor ("RTD2")
> + properties:
> + reg:
> + const: 2
> + sensor-type:
> + items:
> + - enum:
> + - temperature
> + - voltage
> + temperature-mode:
> + items:
> + - enum:
> + - thermistor
> + - thermal-diode
> + required:
> + - reg
> + - sensor-type
> +
> + input@3:
> + type: object
> + description: Remote Temperature Sensor or Voltage Sensor ("RTD3")
> + properties:
> + reg:
> + const: 3
> + sensor-type:
> + items:
> + - enum:
> + - temperature
> + - voltage
> + required:
> + - reg
> + - sensor-type
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + nct7802@28 {
> + compatible = "nuvoton,nct7802";
> + reg = <0x28>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + input@0 { /* LTD */
> + reg = <0>;
> + status = "okay";
> + };
> +
> + input@1 { /* RTD1 */
> + reg = <1>;
> + status = "okay";
> + sensor-type = "temperature";
> + temperature-mode = "thermistor";
> + };
> +
> + input@2 { /* RTD2 */
> + reg = <2>;
> + status = "okay";
> + sensor-type = "temperature";
> + temperature-mode = "thermal-diode";
> + };
> +
> + input@3 { /* RTD3 */
> + reg = <3>;
> + status = "okay";
> + sensor-type = "voltage";
> + };
> + };
> + };
>
^ permalink raw reply [flat|nested] 4+ messages in thread