[PATCH v2 31/67] media: platform: ti-vpe: move config to its own file

[Mauro Carvalho Chehab <mchehab@kernel.org>]

In order to better organize the platform/Kconfig, place
ti-vpe-specific config stuff on a separate Kconfig file.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
---

To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover.
See [PATCH v2 00/67] at: https://lore.kernel.org/all/cover.1647274406.git.mchehab@kernel.org/

 drivers/media/platform/Kconfig        | 60 +-------------------------
 drivers/media/platform/ti-vpe/Kconfig | 62 +++++++++++++++++++++++++++
 2 files changed, 63 insertions(+), 59 deletions(-)
 create mode 100644 drivers/media/platform/ti-vpe/Kconfig

diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index b0acbf3ccb69..228881ae0d22 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -66,6 +66,7 @@ source "drivers/media/platform/stm32/Kconfig"
 source "drivers/media/platform/sunxi/sun8i-di/Kconfig"
 source "drivers/media/platform/sunxi/sun8i-rotate/Kconfig"
 source "drivers/media/platform/tegra/vde/Kconfig"
+source "drivers/media/platform/ti-vpe/Kconfig"
 
 config VIDEO_MUX
 	tristate "Video Multiplexer"
@@ -106,33 +107,6 @@ source "drivers/media/platform/xilinx/Kconfig"
 source "drivers/media/platform/atmel/Kconfig"
 source "drivers/media/platform/sunxi/Kconfig"
 
-config VIDEO_TI_CAL
-	tristate "TI CAL (Camera Adaptation Layer) driver"
-	depends on V4L_PLATFORM_DRIVERS
-	depends on VIDEO_DEV && VIDEO_V4L2
-	select MEDIA_CONTROLLER
-	select VIDEO_V4L2_SUBDEV_API
-	depends on SOC_DRA7XX || ARCH_K3 || COMPILE_TEST
-	select VIDEOBUF2_DMA_CONTIG
-	select V4L2_FWNODE
-	help
-	  Support for the TI CAL (Camera Adaptation Layer) block
-	  found on DRA72X SoC.
-	  In TI Technical Reference Manual this module is referred as
-	  Camera Interface Subsystem (CAMSS).
-
-config VIDEO_TI_CAL_MC
-	bool "Media Controller centric mode by default"
-	depends on VIDEO_TI_CAL
-	default n
-	help
-	  Enables Media Controller centric mode by default.
-
-	  If set, CAL driver will start in Media Controller mode by
-	  default. Note that this behavior can be overridden via
-	  module parameter 'mc_api'.
-
-
 # Mem2mem drivers
 
 config VIDEO_MEM2MEM_DEINTERLACE
@@ -212,37 +186,5 @@ config VIDEO_STI_DELTA_DRIVER
 	select V4L2_MEM2MEM_DEV
 	select RPMSG
 
-config VIDEO_TI_VPE
-	tristate "TI VPE (Video Processing Engine) driver"
-	depends on V4L_MEM2MEM_DRIVERS
-	depends on VIDEO_DEV && VIDEO_V4L2
-	depends on SOC_DRA7XX || COMPILE_TEST
-	select VIDEOBUF2_DMA_CONTIG
-	select V4L2_MEM2MEM_DEV
-	select VIDEO_TI_VPDMA
-	select VIDEO_TI_SC
-	select VIDEO_TI_CSC
-	help
-	  Support for the TI VPE(Video Processing Engine) block
-	  found on DRA7XX SoC.
-
-config VIDEO_TI_VPE_DEBUG
-	bool "VPE debug messages"
-	depends on V4L_MEM2MEM_DRIVERS
-	depends on VIDEO_TI_VPE
-	help
-	  Enable debug messages on VPE driver.
-
-# TI VIDEO PORT Helper Modules
-# These will be selected by VPE and VIP
-config VIDEO_TI_VPDMA
-	tristate
-
-config VIDEO_TI_SC
-	tristate
-
-config VIDEO_TI_CSC
-	tristate
-
 # DVB platform drivers
 source "drivers/media/platform/sti/c8sectpfe/Kconfig"
diff --git a/drivers/media/platform/ti-vpe/Kconfig b/drivers/media/platform/ti-vpe/Kconfig
new file mode 100644
index 000000000000..a9ee0189f2f2
--- /dev/null
+++ b/drivers/media/platform/ti-vpe/Kconfig
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+# TI VIDEO PORT Helper Modules
+# These will be selected by VPE and VIP
+config VIDEO_TI_VPDMA
+	tristate
+
+config VIDEO_TI_SC
+	tristate
+
+config VIDEO_TI_CSC
+	tristate
+
+# V4L drivers
+
+config VIDEO_TI_CAL
+	tristate "TI CAL (Camera Adaptation Layer) driver"
+	depends on VIDEO_DEV && VIDEO_V4L2
+	depends on V4L_PLATFORM_DRIVERS
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
+	depends on SOC_DRA7XX || ARCH_K3 || COMPILE_TEST
+	select VIDEOBUF2_DMA_CONTIG
+	select V4L2_FWNODE
+	help
+	  Support for the TI CAL (Camera Adaptation Layer) block
+	  found on DRA72X SoC.
+	  In TI Technical Reference Manual this module is referred as
+	  Camera Interface Subsystem (CAMSS).
+
+config VIDEO_TI_CAL_MC
+	bool "Media Controller centric mode by default"
+	depends on VIDEO_TI_CAL
+	default n
+	help
+	  Enables Media Controller centric mode by default.
+
+	  If set, CAL driver will start in Media Controller mode by
+	  default. Note that this behavior can be overridden via
+	  module parameter 'mc_api'.
+
+# Mem2mem drivers
+
+config VIDEO_TI_VPE
+	tristate "TI VPE (Video Processing Engine) driver"
+	depends on V4L_MEM2MEM_DRIVERS
+	depends on VIDEO_DEV && VIDEO_V4L2
+	depends on SOC_DRA7XX || COMPILE_TEST
+	select VIDEOBUF2_DMA_CONTIG
+	select V4L2_MEM2MEM_DEV
+	select VIDEO_TI_VPDMA
+	select VIDEO_TI_SC
+	select VIDEO_TI_CSC
+	help
+	  Support for the TI VPE(Video Processing Engine) block
+	  found on DRA7XX SoC.
+
+config VIDEO_TI_VPE_DEBUG
+	bool "VPE debug messages"
+	depends on VIDEO_TI_VPE
+	help
+	  Enable debug messages on VPE driver.
-- 
2.35.1