RE: kernel 2.6.11.2 / megaraid 2.20.4.5 and /proc question

RE: kernel 2.6.11.2 / megaraid 2.20.4.5 and /proc question

[Bagalkote, Sreenivas]

>
>With the 2.6.7 kernel there used to be information in /proc/megaraid.
>I do not see the same information using the 2.6.11.2 kernel.
>Is there anything in /proc using the 2.6.11.2 kernel setup ?
>If not there, then anywhere else ?
>

It is not so much that you had /proc/megaraid in 2.6.7. There are two
distinct series of drivers - megaraid 2.10 and megaraid_mbox 2.20 series.
The 2.10 series are intended to be used on 2.4 kernels and 2.20 on 2.6
kernels. The megaraid_mbox (2.20) driver does not export any /proc
information. You were using 2.00.3 (part of 2.10 series) on 2.6 kernel
which is not really meant to be used that way.

>Also, where might I find information on to forward errors 
>detected bythe
>adapter. e.g send mail to an account
>

I don't fully understand the question. You may want to send a mail to
customer service.

>Thanks,
>Atul
>-

Thanks,
Sreenivas
LSI Logic Corporation

kernel 2.6.11.2 / megaraid 2.20.4.5 and /proc question

[Atul Srinivasan]

Hi,

I've just build kernel version 2.6.11.2 with the new lsi megaraiddrivers
compiled into the kernel. I think the driver version is 2.20.4.5.

I used to be using a 2.6.7 kernel with an older version of the drivers.
2.00.3.

I'm using a MegaRAID SATA 150-6 card.

With the 2.6.7 kernel there used to be information in /proc/megaraid.
I do not see the same information using the 2.6.11.2 kernel.
Is there anything in /proc using the 2.6.11.2 kernel setup ?
If not there, then anywhere else ?

Also, where might I find information on to forward errors detected bythe
adapter. e.g send mail to an account

Apologies in advance if any of the above questions are not 
appropriatefor this
group, or if they are covered in some doc I have not read.

Thanks,
Atul