* [PATCH] bluetooth: ath3k: added Atheros AR3012 with ID 0x0b05:0x17d0
@ 2014-02-27 21:40 Bela Hausmann
2014-02-27 22:43 ` Marcel Holtmann
0 siblings, 1 reply; 5+ messages in thread
From: Bela Hausmann @ 2014-02-27 21:40 UTC (permalink / raw)
To: linux-bluetooth
This adds support for the Atheros AR3012 chipset on the ASUS Z87-Pro (C2) mainboard (ID 0x0b05:0x17d0).
Signed-off-by: Bela Hausmann <bela.hausmann@gmail.com>
---
diff -uprN -X linux-3.13.5-gentoo/Documentation/dontdiff linux-3.13.5-gentoo/drivers/bluetooth/ath3k.c linux-3.13.5-gentoo-bela/drivers/bluetooth/ath3k.c
--- linux-3.13.5-gentoo/drivers/bluetooth/ath3k.c 2014-01-20 03:40:07.000000000 +0100
+++ linux-3.13.5-gentoo-bela/drivers/bluetooth/ath3k.c 2014-02-27 20:09:33.047878117 +0100
@@ -97,6 +97,7 @@ static const struct usb_device_id ath3k_
{ USB_DEVICE(0x13d3, 0x3402) },
{ USB_DEVICE(0x0cf3, 0x3121) },
{ USB_DEVICE(0x0cf3, 0xe003) },
+ { USB_DEVICE(0x0b05, 0x17d0) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -140,6 +141,7 @@ static const struct usb_device_id ath3k_
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
diff -uprN -X linux-3.13.5-gentoo/Documentation/dontdiff linux-3.13.5-gentoo/drivers/bluetooth/btusb.c linux-3.13.5-gentoo-bela/drivers/bluetooth/btusb.c
--- linux-3.13.5-gentoo/drivers/bluetooth/btusb.c 2014-01-20 03:40:07.000000000 +0100
+++ linux-3.13.5-gentoo-bela/drivers/bluetooth/btusb.c 2014-02-27 20:10:20.825905643 +0100
@@ -164,6 +164,7 @@ static const struct usb_device_id blackl
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] bluetooth: ath3k: added Atheros AR3012 with ID 0x0b05:0x17d0
2014-02-27 21:40 [PATCH] bluetooth: ath3k: added Atheros AR3012 with ID 0x0b05:0x17d0 Bela Hausmann
@ 2014-02-27 22:43 ` Marcel Holtmann
2014-02-27 22:54 ` Bela Hausmann
0 siblings, 1 reply; 5+ messages in thread
From: Marcel Holtmann @ 2014-02-27 22:43 UTC (permalink / raw)
To: Bela Hausmann; +Cc: linux-bluetooth
Hi Bela,
> This adds support for the Atheros AR3012 chipset on the ASUS Z87-Pro (C2) mainboard (ID 0x0b05:0x17d0).
include the content of /sys/kernel/debug/usb/devices for this controller.
>
> Signed-off-by: Bela Hausmann <bela.hausmann@gmail.com>
> ---
> diff -uprN -X linux-3.13.5-gentoo/Documentation/dontdiff linux-3.13.5-gentoo/drivers/bluetooth/ath3k.c linux-3.13.5-gentoo-bela/drivers/bluetooth/ath3k.c
> --- linux-3.13.5-gentoo/drivers/bluetooth/ath3k.c 2014-01-20 03:40:07.000000000 +0100
> +++ linux-3.13.5-gentoo-bela/drivers/bluetooth/ath3k.c 2014-02-27 20:09:33.047878117 +0100
> @@ -97,6 +97,7 @@ static const struct usb_device_id ath3k_
> { USB_DEVICE(0x13d3, 0x3402) },
> { USB_DEVICE(0x0cf3, 0x3121) },
> { USB_DEVICE(0x0cf3, 0xe003) },
> + { USB_DEVICE(0x0b05, 0x17d0) },
Make sure that you email client does not screw up tabs. This looks pretty much like it is messed up.
Regards
Marcel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] bluetooth: ath3k: added Atheros AR3012 with ID 0x0b05:0x17d0
2014-02-27 22:43 ` Marcel Holtmann
@ 2014-02-27 22:54 ` Bela Hausmann
2014-02-27 23:19 ` Marcel Holtmann
0 siblings, 1 reply; 5+ messages in thread
From: Bela Hausmann @ 2014-02-27 22:54 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: linux-bluetooth
Hi Marcel,
sorry for the messed up tabs.
Here is /sys/kernel/debug/usb/devices:
T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0b05 ProdID=17d0 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
An again the patch.
Best wishes,
Bela
This adds support for the Atheros AR3012 chipset on the ASUS Z87-Pro (C2) mainboard (ID 0x0b05:0x17d0).
Signed-off-by: Bela Hausmann <bela.hausmann@gmail.com>
---
diff -uprN -X linux-3.13.5-gentoo/Documentation/dontdiff linux-3.13.5-gentoo/drivers/bluetooth/ath3k.c linux-3.13.5-gentoo-bela/drivers/bluetooth/ath3k.c
--- linux-3.13.5-gentoo/drivers/bluetooth/ath3k.c 2014-01-20 03:40:07.000000000 +0100
+++ linux-3.13.5-gentoo-bela/drivers/bluetooth/ath3k.c 2014-02-27 20:09:33.047878117 +0100
@@ -97,6 +97,7 @@ static const struct usb_device_id ath3k_
{ USB_DEVICE(0x13d3, 0x3402) },
{ USB_DEVICE(0x0cf3, 0x3121) },
{ USB_DEVICE(0x0cf3, 0xe003) },
+ { USB_DEVICE(0x0b05, 0x17d0) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -140,6 +141,7 @@ static const struct usb_device_id ath3k_
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
diff -uprN -X linux-3.13.5-gentoo/Documentation/dontdiff linux-3.13.5-gentoo/drivers/bluetooth/btusb.c linux-3.13.5-gentoo-bela/drivers/bluetooth/btusb.c
--- linux-3.13.5-gentoo/drivers/bluetooth/btusb.c 2014-01-20 03:40:07.000000000 +0100
+++ linux-3.13.5-gentoo-bela/drivers/bluetooth/btusb.c 2014-02-27 20:10:20.825905643 +0100
@@ -164,6 +164,7 @@ static const struct usb_device_id blackl
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
On 27/02/14 23:43, Marcel Holtmann wrote:
> Hi Bela,
>
>> This adds support for the Atheros AR3012 chipset on the ASUS Z87-Pro (C2) mainboard (ID 0x0b05:0x17d0).
>
> include the content of /sys/kernel/debug/usb/devices for this controller.
>
>>
>> Signed-off-by: Bela Hausmann <bela.hausmann@gmail.com>
>> ---
>> diff -uprN -X linux-3.13.5-gentoo/Documentation/dontdiff linux-3.13.5-gentoo/drivers/bluetooth/ath3k.c linux-3.13.5-gentoo-bela/drivers/bluetooth/ath3k.c
>> --- linux-3.13.5-gentoo/drivers/bluetooth/ath3k.c 2014-01-20 03:40:07.000000000 +0100
>> +++ linux-3.13.5-gentoo-bela/drivers/bluetooth/ath3k.c 2014-02-27 20:09:33.047878117 +0100
>> @@ -97,6 +97,7 @@ static const struct usb_device_id ath3k_
>> { USB_DEVICE(0x13d3, 0x3402) },
>> { USB_DEVICE(0x0cf3, 0x3121) },
>> { USB_DEVICE(0x0cf3, 0xe003) },
>> + { USB_DEVICE(0x0b05, 0x17d0) },
>
> Make sure that you email client does not screw up tabs. This looks pretty much like it is messed up.
>
> Regards
>
> Marcel
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] bluetooth: ath3k: added Atheros AR3012 with ID 0x0b05:0x17d0
2014-02-27 22:54 ` Bela Hausmann
@ 2014-02-27 23:19 ` Marcel Holtmann
2014-02-28 20:26 ` Bela Hausmann
0 siblings, 1 reply; 5+ messages in thread
From: Marcel Holtmann @ 2014-02-27 23:19 UTC (permalink / raw)
To: Bela Hausmann; +Cc: linux-bluetooth
Hi Bela,
> Hi Marcel,
>
> sorry for the messed up tabs.
>
> Here is /sys/kernel/debug/usb/devices:
> T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0b05 ProdID=17d0 Rev= 0.02
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>
> An again the patch.
>
> Best wishes,
> Bela
why don’t you use git-format-patch and git-send-email. Just save the email you send as raw text and see what happens if you apply it with git-am and then look at git-log.
Regards
Marcel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] bluetooth: ath3k: added Atheros AR3012 with ID 0x0b05:0x17d0
2014-02-27 23:19 ` Marcel Holtmann
@ 2014-02-28 20:26 ` Bela Hausmann
0 siblings, 0 replies; 5+ messages in thread
From: Bela Hausmann @ 2014-02-28 20:26 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: linux-bluetooth
Hi Marcel,
I would, but I just now noticed that you already added this device ID
a few days ago in commit a735f9e22432899cee188d167966782c29246390 to
linux-next [1]. Thank you!
Best wishes,
Bela
[1] https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit=
/drivers/bluetooth?id=3Da735f9e22432899cee188d167966782c29246390
2014-02-28 0:19 GMT+01:00 Marcel Holtmann <marcel@holtmann.org>:
> Hi Bela,
>
>> Hi Marcel,
>>
>> sorry for the messed up tabs.
>>
>> Here is /sys/kernel/debug/usb/devices:
>> T: Bus=3D02 Lev=3D02 Prnt=3D02 Port=3D03 Cnt=3D02 Dev#=3D 4 Spd=3D12 =
MxCh=3D 0
>> D: Ver=3D 1.10 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 MxPS=3D64 #Cfgs=3D 1
>> P: Vendor=3D0b05 ProdID=3D17d0 Rev=3D 0.02
>> C:* #Ifs=3D 2 Cfg#=3D 1 Atr=3De0 MxPwr=3D100mA
>> I:* If#=3D 0 Alt=3D 0 #EPs=3D 3 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Drive=
r=3Dbtusb
>> E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 16 Ivl=3D1ms
>> E: Ad=3D82(I) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
>> E: Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
>> I:* If#=3D 1 Alt=3D 0 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Drive=
r=3Dbtusb
>> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 0 Ivl=3D1ms
>> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 0 Ivl=3D1ms
>> I: If#=3D 1 Alt=3D 1 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Drive=
r=3Dbtusb
>> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 9 Ivl=3D1ms
>> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 9 Ivl=3D1ms
>> I: If#=3D 1 Alt=3D 2 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Drive=
r=3Dbtusb
>> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 17 Ivl=3D1ms
>> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 17 Ivl=3D1ms
>> I: If#=3D 1 Alt=3D 3 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Drive=
r=3Dbtusb
>> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 25 Ivl=3D1ms
>> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 25 Ivl=3D1ms
>> I: If#=3D 1 Alt=3D 4 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Drive=
r=3Dbtusb
>> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 33 Ivl=3D1ms
>> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 33 Ivl=3D1ms
>> I: If#=3D 1 Alt=3D 5 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Drive=
r=3Dbtusb
>> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 49 Ivl=3D1ms
>> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 49 Ivl=3D1ms
>>
>> An again the patch.
>>
>> Best wishes,
>> Bela
>
> why don=E2=80=99t you use git-format-patch and git-send-email. Just save =
the email you send as raw text and see what happens if you apply it with gi=
t-am and then look at git-log.
>
> Regards
>
> Marcel
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-02-28 20:26 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-02-27 21:40 [PATCH] bluetooth: ath3k: added Atheros AR3012 with ID 0x0b05:0x17d0 Bela Hausmann
2014-02-27 22:43 ` Marcel Holtmann
2014-02-27 22:54 ` Bela Hausmann
2014-02-27 23:19 ` Marcel Holtmann
2014-02-28 20:26 ` Bela Hausmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.