From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/4] i2c: rcar_i2c: Add DM and DT capable I2C driver
Date: Thu, 10 May 2018 09:20:21 +0200 [thread overview]
Message-ID: <0adb90c6-027b-6d50-052f-d06f88894acf@denx.de> (raw)
In-Reply-To: <20180501070335.1815-2-marek.vasut+renesas@gmail.com>
Hello Marek,
Am 01.05.2018 um 09:03 schrieb Marek Vasut:
> Add derivative of the rcar_i2c driver which is capable of
> probing itself from DM and uses DT.
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
> Cc: Heiko Schocher <hs@denx.de>
> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
> ---
> drivers/i2c/Kconfig | 6 +
> drivers/i2c/Makefile | 1 +
> drivers/i2c/rcar_i2c.c | 355 +++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 362 insertions(+)
> create mode 100644 drivers/i2c/rcar_i2c.c
I fixed patch 1/4 and tried to apply this patch, but checkpatch says:
--2018-05-10 09:16:48-- http://patchwork.ozlabs.org/patch/906952/mbox
Auflösen des Hostnamens patchwork.ozlabs.org (patchwork.ozlabs.org)… 203.11.71.1, 2401:3900:2:1::2
Verbindungsaufbau zu patchwork.ozlabs.org (patchwork.ozlabs.org)|203.11.71.1|:80 … verbunden.
HTTP-Anforderung gesendet, auf Antwort wird gewartet … 301 Moved Permanently
Platz: /patch/906952/mbox/ [folgend]
--2018-05-10 09:16:49-- http://patchwork.ozlabs.org/patch/906952/mbox/
Wiederverwendung der bestehenden Verbindung zu patchwork.ozlabs.org:80.
HTTP-Anforderung gesendet, auf Antwort wird gewartet … 200 OK
Länge: nicht spezifiziert [text/plain]
Wird in »mbox« gespeichert.
mbox [ <=>
] 11,38K --.-KB/s in 0,01s
2018-05-10 09:16:50 (933 KB/s) - »mbox« gespeichert [11653]
WARNING: please write a paragraph that describes the config symbol fully
#37: FILE: drivers/i2c/Kconfig:342:
+config SYS_I2C_RCAR_I2C
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#59:
new file mode 100644
WARNING: Missing or malformed SPDX-License-Identifier tag in line 1
#64: FILE: drivers/i2c/rcar_i2c.c:1:
+/*
CHECK: Blank lines aren't necessary after an open brace '{'
#214: FILE: drivers/i2c/rcar_i2c.c:151:
+ for (i = 0; i < msg->len; i++) {
+
total: 0 errors, 3 warnings, 1 checks, 374 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
mbox has style problems, please review.
NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE
NETWORKING_BLOCK_COMMENT_STYLE PREFER_ETHER_ADDR_COPY USLEEP_RANGE
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Wende an: i2c: rcar_i2c: Add DM and DT capable I2C driver
Coukd you please send a rebased version of the patchset?
Thanks!
Beside of this, you can add my to patch 1 and 2:
Reviewed-by: Heiko Schocher <hs@denx.de>
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de
next prev parent reply other threads:[~2018-05-10 7:20 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-01 7:03 [U-Boot] [PATCH 1/4] i2c: rcar_i2c: Remove the driver Marek Vasut
2018-05-01 7:03 ` [U-Boot] [PATCH 2/4] i2c: rcar_i2c: Add DM and DT capable I2C driver Marek Vasut
2018-05-10 7:20 ` Heiko Schocher [this message]
2018-05-01 7:03 ` [U-Boot] [PATCH 3/4] ARM: rmobile: Enable DM capable RCar I2C driver on Lager Marek Vasut
2018-05-10 7:23 ` Heiko Schocher
2018-05-10 10:23 ` Marek Vasut
2018-05-01 7:03 ` [U-Boot] [PATCH 4/4] ARM: rmobile: Enable DM capable RCar I2C driver on Silk Marek Vasut
2018-05-08 8:14 ` [U-Boot] [PATCH 1/4] i2c: rcar_i2c: Remove the driver Heiko Schocher
2018-05-08 9:28 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0adb90c6-027b-6d50-052f-d06f88894acf@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.