[PATCH v2 1/5] docs: cpufreq: fix a broken reference

[PATCH v2 1/5] docs: cpufreq: fix a broken reference

[Mauro Carvalho Chehab]

The old cpufreq docs got moved. Let's also update its
pointer inside Kconfig.x86.

Fixes: 78a0abeca1bd ("Documentation: cpufreq: Move legacy driver documentation")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/cpufreq/Kconfig.x86 | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86
index a6528388952e..62502d0e4c33 100644
--- a/drivers/cpufreq/Kconfig.x86
+++ b/drivers/cpufreq/Kconfig.x86
@@ -25,7 +25,7 @@ config X86_PCC_CPUFREQ
 	  This driver adds support for the PCC interface.
 
 	  For details, take a look at:
-	  <file:Documentation/cpu-freq/pcc-cpufreq.txt>.
+	  <file:Documentation/admin-guide/pm/cpufreq_drivers.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called pcc-cpufreq.
-- 
2.24.1

Re: [PATCH v2 1/5] docs: cpufreq: fix a broken reference

[Rafael J. Wysocki]

On Tue, Mar 3, 2020 at 2:52 PM Mauro Carvalho Chehab
<mchehab+huawei@kernel.org> wrote:
>
> The old cpufreq docs got moved. Let's also update its
> pointer inside Kconfig.x86.
>
> Fixes: 78a0abeca1bd ("Documentation: cpufreq: Move legacy driver documentation")
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  drivers/cpufreq/Kconfig.x86 | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86
> index a6528388952e..62502d0e4c33 100644
> --- a/drivers/cpufreq/Kconfig.x86
> +++ b/drivers/cpufreq/Kconfig.x86
> @@ -25,7 +25,7 @@ config X86_PCC_CPUFREQ
>           This driver adds support for the PCC interface.
>
>           For details, take a look at:
> -         <file:Documentation/cpu-freq/pcc-cpufreq.txt>.
> +         <file:Documentation/admin-guide/pm/cpufreq_drivers.rst>.
>
>           To compile this driver as a module, choose M here: the
>           module will be called pcc-cpufreq.
> --

All of the patches in this series applied as 5.7 material, thanks!

[PATCH v2 2/5] docs: cpu-freq: convert index.txt to ReST

[Mauro Carvalho Chehab]

most of the stuff there can be re-used with ReST format,
but we need to add an empty TOC and remove the existing
entries, as the following conversion patches will be re-adding
them, as they're converted.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/cpu-freq/index.rst | 35 ++++++++++++++++++++
 Documentation/cpu-freq/index.txt | 56 --------------------------------
 Documentation/index.rst          |  1 +
 3 files changed, 36 insertions(+), 56 deletions(-)
 create mode 100644 Documentation/cpu-freq/index.rst
 delete mode 100644 Documentation/cpu-freq/index.txt

diff --git a/Documentation/cpu-freq/index.rst b/Documentation/cpu-freq/index.rst
new file mode 100644
index 000000000000..1bff3dfddd23
--- /dev/null
+++ b/Documentation/cpu-freq/index.rst
@@ -0,0 +1,35 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==============================================================================
+Linux CPUFreq - CPU frequency and voltage scaling code in the Linux(TM) kernel
+==============================================================================
+
+Author: Dominik Brodowski  <linux@brodo.de>
+
+   Clock scaling allows you to change the clock speed of the CPUs on the
+   fly. This is a nice method to save battery power, because the lower
+   the clock speed, the less power the CPU consumes.
+
+
+.. toctree::
+   :maxdepth: 1
+
+Mailing List
+------------
+There is a CPU frequency changing CVS commit and general list where
+you can report bugs, problems or submit patches. To post a message,
+send an email to linux-pm@vger.kernel.org.
+
+Links
+-----
+the FTP archives:
+* ftp://ftp.linux.org.uk/pub/linux/cpufreq/
+
+how to access the CVS repository:
+* http://cvs.arm.linux.org.uk/
+
+the CPUFreq Mailing list:
+* http://vger.kernel.org/vger-lists.html#linux-pm
+
+Clock and voltage scaling for the SA-1100:
+* http://www.lartmaker.nl/projects/scaling
diff --git a/Documentation/cpu-freq/index.txt b/Documentation/cpu-freq/index.txt
deleted file mode 100644
index c15e75386a05..000000000000
--- a/Documentation/cpu-freq/index.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-     CPU frequency and voltage scaling code in the Linux(TM) kernel
-
-
-		         L i n u x    C P U F r e q
-
-
-
-
-		    Dominik Brodowski  <linux@brodo.de>
-
-
-
-   Clock scaling allows you to change the clock speed of the CPUs on the
-    fly. This is a nice method to save battery power, because the lower
-            the clock speed, the less power the CPU consumes.
-
-
-
-Documents in this directory:
-----------------------------
-
-amd-powernow.txt -	AMD powernow driver specific file.
-
-core.txt	-	General description of the CPUFreq core and
-			of CPUFreq notifiers.
-
-cpu-drivers.txt -	How to implement a new cpufreq processor driver.
-
-cpufreq-nforce2.txt -	nVidia nForce2 platform specific file.
-
-cpufreq-stats.txt -	General description of sysfs cpufreq stats.
-
-index.txt	-	File index, Mailing list and Links (this document)
-
-pcc-cpufreq.txt -	PCC cpufreq driver specific file.
-
-
-Mailing List
-------------
-There is a CPU frequency changing CVS commit and general list where
-you can report bugs, problems or submit patches. To post a message,
-send an email to linux-pm@vger.kernel.org.
-
-Links
------
-the FTP archives:
-* ftp://ftp.linux.org.uk/pub/linux/cpufreq/
-
-how to access the CVS repository:
-* http://cvs.arm.linux.org.uk/
-
-the CPUFreq Mailing list:
-* http://vger.kernel.org/vger-lists.html#linux-pm
-
-Clock and voltage scaling for the SA-1100:
-* http://www.lartmaker.nl/projects/scaling
diff --git a/Documentation/index.rst b/Documentation/index.rst
index e99d0bd2589d..4cf37ad1cd1d 100644
--- a/Documentation/index.rst
+++ b/Documentation/index.rst
@@ -99,6 +99,7 @@ needed).
    accounting/index
    block/index
    cdrom/index
+   cpu-freq/index
    ide/index
    fb/index
    fpga/index
-- 
2.24.1

[PATCH v2 3/5] docs: cpu-freq: convert core.txt to ReST

[Mauro Carvalho Chehab]

- Add a SPDX header;
- Adjust the  document title, based on the original contents of
  cpu-freq/index.txt;
- Use lists where needed;
- Comment out the existing text-only index;
- use ``foo`` to mark a literal expression with asterisk;
- Adjust some title marks;
- Add table markups;
- Add notes markups;
- Some whitespace fixes and new line breaks;
- Add it to cpu-freq/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/cpu-freq/{core.txt => core.rst} | 65 ++++++++++---------
 Documentation/cpu-freq/index.rst              |  2 +
 2 files changed, 35 insertions(+), 32 deletions(-)
 rename Documentation/cpu-freq/{core.txt => core.rst} (69%)

diff --git a/Documentation/cpu-freq/core.txt b/Documentation/cpu-freq/core.rst
similarity index 69%
rename from Documentation/cpu-freq/core.txt
rename to Documentation/cpu-freq/core.rst
index ed577d9c154b..33cb90bd1d8f 100644
--- a/Documentation/cpu-freq/core.txt
+++ b/Documentation/cpu-freq/core.rst
@@ -1,31 +1,23 @@
-     CPU frequency and voltage scaling code in the Linux(TM) kernel
+.. SPDX-License-Identifier: GPL-2.0
 
+=============================================================
+General description of the CPUFreq core and CPUFreq notifiers
+=============================================================
 
-		         L i n u x    C P U F r e q
+Authors:
+	- Dominik Brodowski  <linux@brodo.de>
+	- David Kimdon <dwhedon@debian.org>
+	- Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+	- Viresh Kumar <viresh.kumar@linaro.org>
 
-			  C P U F r e q    C o r e
+.. Contents:
 
-
-		    Dominik Brodowski  <linux@brodo.de>
-		     David Kimdon <dwhedon@debian.org>
-		Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-		   Viresh Kumar <viresh.kumar@linaro.org>
-
-
-
-   Clock scaling allows you to change the clock speed of the CPUs on the
-    fly. This is a nice method to save battery power, because the lower
-            the clock speed, the less power the CPU consumes.
-
-
-Contents:
----------
-1.  CPUFreq core and interfaces
-2.  CPUFreq notifiers
-3.  CPUFreq Table Generation with Operating Performance Point (OPP)
+   1.  CPUFreq core and interfaces
+   2.  CPUFreq notifiers
+   3.  CPUFreq Table Generation with Operating Performance Point (OPP)
 
 1. General Information
-=======================
+======================
 
 The CPUFreq core code is located in drivers/cpufreq/cpufreq.c. This
 cpufreq code offers a standardized interface for the CPUFreq
@@ -63,7 +55,7 @@ The phase is specified in the second argument to the notifier.  The phase is
 CPUFREQ_CREATE_POLICY when the policy is first created and it is
 CPUFREQ_REMOVE_POLICY when the policy is removed.
 
-The third argument, a void *pointer, points to a struct cpufreq_policy
+The third argument, a ``void *pointer``, points to a struct cpufreq_policy
 consisting of several values, including min, max (the lower and upper
 frequencies (in kHz) of the new policy).
 
@@ -80,10 +72,13 @@ CPUFREQ_POSTCHANGE.
 
 The third argument is a struct cpufreq_freqs with the following
 values:
-cpu	- number of the affected CPU
-old	- old frequency
-new	- new frequency
-flags	- flags of the cpufreq driver
+
+=====	===========================
+cpu	number of the affected CPU
+old	old frequency
+new	new frequency
+flags	flags of the cpufreq driver
+=====	===========================
 
 3. CPUFreq Table Generation with Operating Performance Point (OPP)
 ==================================================================
@@ -94,9 +89,12 @@ dev_pm_opp_init_cpufreq_table -
 	the OPP layer's internal information about the available frequencies
 	into a format readily providable to cpufreq.
 
-	WARNING: Do not use this function in interrupt context.
+	.. Warning::
+
+	   Do not use this function in interrupt context.
+
+	Example::
 
-	Example:
 	 soc_pm_init()
 	 {
 		/* Do things */
@@ -106,7 +104,10 @@ dev_pm_opp_init_cpufreq_table -
 		/* Do other things */
 	 }
 
-	NOTE: This function is available only if CONFIG_CPU_FREQ is enabled in
-	addition to CONFIG_PM_OPP.
+	.. note::
 
-dev_pm_opp_free_cpufreq_table - Free up the table allocated by dev_pm_opp_init_cpufreq_table
+	   This function is available only if CONFIG_CPU_FREQ is enabled in
+	   addition to CONFIG_PM_OPP.
+
+dev_pm_opp_free_cpufreq_table
+	Free up the table allocated by dev_pm_opp_init_cpufreq_table
diff --git a/Documentation/cpu-freq/index.rst b/Documentation/cpu-freq/index.rst
index 1bff3dfddd23..53501c58f41d 100644
--- a/Documentation/cpu-freq/index.rst
+++ b/Documentation/cpu-freq/index.rst
@@ -14,6 +14,8 @@ Author: Dominik Brodowski  <linux@brodo.de>
 .. toctree::
    :maxdepth: 1
 
+   core
+
 Mailing List
 ------------
 There is a CPU frequency changing CVS commit and general list where
-- 
2.24.1

[PATCH v2 4/5] docs: cpu-freq: convert cpu-drivers.txt to ReST

[Mauro Carvalho Chehab]

- Add a SPDX header;
- Add a document title, based on the original contents of
  cpu-freq/index.txt;
- Use lists where needed;
- Comment out the existing text-only index;
- Adjust some title marks;
- Add table markups;
- Add notes markups;
- Mark literal blocks as such;
- use ``foo`` for literal texts;
- Some whitespace fixes and new line breaks;
- Add it to cpu-freq/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../{cpu-drivers.txt => cpu-drivers.rst}      | 129 +++++++++---------
 Documentation/cpu-freq/index.rst              |   1 +
 2 files changed, 64 insertions(+), 66 deletions(-)
 rename Documentation/cpu-freq/{cpu-drivers.txt => cpu-drivers.rst} (72%)

diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.rst
similarity index 72%
rename from Documentation/cpu-freq/cpu-drivers.txt
rename to Documentation/cpu-freq/cpu-drivers.rst
index 6e353d00cdc6..a697278ce190 100644
--- a/Documentation/cpu-freq/cpu-drivers.txt
+++ b/Documentation/cpu-freq/cpu-drivers.rst
@@ -1,35 +1,27 @@
-     CPU frequency and voltage scaling code in the Linux(TM) kernel
+.. SPDX-License-Identifier: GPL-2.0
 
+===============================================
+How to Implement a new CPUFreq Processor Driver
+===============================================
 
-		         L i n u x    C P U F r e q
+Authors:
 
-			   C P U   D r i v e r s 
 
-		       - information for developers -
+	- Dominik Brodowski  <linux@brodo.de>
+	- Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+	- Viresh Kumar <viresh.kumar@linaro.org>
 
+.. Contents
 
-		    Dominik Brodowski  <linux@brodo.de>
-		Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-		   Viresh Kumar <viresh.kumar@linaro.org>
-
-
-
-   Clock scaling allows you to change the clock speed of the CPUs on the
-    fly. This is a nice method to save battery power, because the lower
-            the clock speed, the less power the CPU consumes.
-
-
-Contents:
----------
-1.   What To Do?
-1.1  Initialization
-1.2  Per-CPU Initialization
-1.3  verify
-1.4  target/target_index or setpolicy?
-1.5  target/target_index
-1.6  setpolicy
-1.7  get_intermediate and target_intermediate
-2.   Frequency Table Helpers
+   1.   What To Do?
+   1.1  Initialization
+   1.2  Per-CPU Initialization
+   1.3  verify
+   1.4  target/target_index or setpolicy?
+   1.5  target/target_index
+   1.6  setpolicy
+   1.7  get_intermediate and target_intermediate
+   2.   Frequency Table Helpers
 
 
 
@@ -49,7 +41,7 @@ function check whether this kernel runs on the right CPU and the right
 chipset. If so, register a struct cpufreq_driver with the CPUfreq core
 using cpufreq_register_driver()
 
-What shall this struct cpufreq_driver contain? 
+What shall this struct cpufreq_driver contain?
 
  .name - The name of this driver.
 
@@ -108,37 +100,42 @@ Whenever a new CPU is registered with the device model, or after the
 cpufreq driver registers itself, the per-policy initialization function
 cpufreq_driver.init is called if no cpufreq policy existed for the CPU.
 Note that the .init() and .exit() routines are called only once for the
-policy and not for each CPU managed by the policy. It takes a struct
-cpufreq_policy *policy as argument. What to do now?
+policy and not for each CPU managed by the policy. It takes a ``struct
+cpufreq_policy *policy`` as argument. What to do now?
 
 If necessary, activate the CPUfreq support on your CPU.
 
 Then, the driver must fill in the following values:
 
-policy->cpuinfo.min_freq _and_
-policy->cpuinfo.max_freq -	the minimum and maximum frequency 
-				(in kHz) which is supported by 
-				this CPU
-policy->cpuinfo.transition_latency   the time it takes on this CPU to
-				switch between two frequencies in
-				nanoseconds (if appropriate, else
-				specify CPUFREQ_ETERNAL)
-
-policy->cur			The current operating frequency of
-				this CPU (if appropriate)
-policy->min, 
-policy->max, 
-policy->policy and, if necessary,
-policy->governor		must contain the "default policy" for
-				this CPU. A few moments later,
-				cpufreq_driver.verify and either
-				cpufreq_driver.setpolicy or
-				cpufreq_driver.target/target_index is called
-				with these values.
-policy->cpus			Update this with the masks of the
-				(online + offline) CPUs that do DVFS
-				along with this CPU (i.e.  that share
-				clock/voltage rails with it).
++-----------------------------------+--------------------------------------+
+|policy->cpuinfo.min_freq _and_	    |					   |
+|policy->cpuinfo.max_freq	    | the minimum and maximum frequency	   |
+|				    | (in kHz) which is supported by	   |
+|				    | this CPU				   |
++-----------------------------------+--------------------------------------+
+|policy->cpuinfo.transition_latency | the time it takes on this CPU to	   |
+|				    | switch between two frequencies in	   |
+|				    | nanoseconds (if appropriate, else	   |
+|				    | specify CPUFREQ_ETERNAL)		   |
++-----------------------------------+--------------------------------------+
+|policy->cur			    | The current operating frequency of   |
+|				    | this CPU (if appropriate)		   |
++-----------------------------------+--------------------------------------+
+|policy->min,			    |					   |
+|policy->max,			    |					   |
+|policy->policy and, if necessary,  |					   |
+|policy->governor		    | must contain the "default policy" for|
+|				    | this CPU. A few moments later,       |
+|				    | cpufreq_driver.verify and either     |
+|				    | cpufreq_driver.setpolicy or          |
+|				    | cpufreq_driver.target/target_index is|
+|				    | called with these values.		   |
++-----------------------------------+--------------------------------------+
+|policy->cpus			    | Update this with the masks of the	   |
+|				    | (online + offline) CPUs that do DVFS |
+|				    | along with this CPU (i.e.  that share|
+|				    | clock/voltage rails with it).	   |
++-----------------------------------+--------------------------------------+
 
 For setting some of these values (cpuinfo.min[max]_freq, policy->min[max]), the
 frequency table helpers might be helpful. See the section 2 for more information
@@ -151,8 +148,8 @@ on them.
 When the user decides a new policy (consisting of
 "policy,governor,min,max") shall be set, this policy must be validated
 so that incompatible values can be corrected. For verifying these
-values cpufreq_verify_within_limits(struct cpufreq_policy *policy,
-unsigned int min_freq, unsigned int max_freq) function might be helpful.
+values cpufreq_verify_within_limits(``struct cpufreq_policy *policy``,
+``unsigned int min_freq``, ``unsigned int max_freq``) function might be helpful.
 See section 2 for details on frequency table helpers.
 
 You need to make sure that at least one valid frequency (or operating
@@ -163,7 +160,7 @@ policy->max first, and only if this is no solution, decrease policy->min.
 1.4 target or target_index or setpolicy or fast_switch?
 -------------------------------------------------------
 
-Most cpufreq drivers or even most cpu frequency scaling algorithms 
+Most cpufreq drivers or even most cpu frequency scaling algorithms
 only allow the CPU frequency to be set to predefined fixed values. For
 these, you use the ->target(), ->target_index() or ->fast_switch()
 callbacks.
@@ -175,8 +172,8 @@ limits on their own. These shall use the ->setpolicy() callback.
 1.5. target/target_index
 ------------------------
 
-The target_index call has two arguments: struct cpufreq_policy *policy,
-and unsigned int index (into the exposed frequency table).
+The target_index call has two arguments: ``struct cpufreq_policy *policy``,
+and ``unsigned int`` index (into the exposed frequency table).
 
 The CPUfreq driver must set the new frequency when called here. The
 actual frequency must be determined by freq_table[index].frequency.
@@ -184,9 +181,9 @@ actual frequency must be determined by freq_table[index].frequency.
 It should always restore to earlier frequency (i.e. policy->restore_freq) in
 case of errors, even if we switched to intermediate frequency earlier.
 
-Deprecated:
+Deprecated
 ----------
-The target call has three arguments: struct cpufreq_policy *policy,
+The target call has three arguments: ``struct cpufreq_policy *policy``,
 unsigned int target_frequency, unsigned int relation.
 
 The CPUfreq driver must set the new frequency when called here. The
@@ -210,14 +207,14 @@ Not all drivers are expected to implement it, as sleeping from within
 this callback isn't allowed. This callback must be highly optimized to
 do switching as fast as possible.
 
-This function has two arguments: struct cpufreq_policy *policy and
-unsigned int target_frequency.
+This function has two arguments: ``struct cpufreq_policy *policy`` and
+``unsigned int target_frequency``.
 
 
 1.7 setpolicy
 -------------
 
-The setpolicy call only takes a struct cpufreq_policy *policy as
+The setpolicy call only takes a ``struct cpufreq_policy *policy`` as
 argument. You need to set the lower limit of the in-processor or
 in-chipset dynamic frequency switching to policy->min, the upper limit
 to policy->max, and -if supported- select a performance-oriented
@@ -278,10 +275,10 @@ table.
 
 cpufreq_for_each_valid_entry(pos, table) - iterates over all entries,
 excluding CPUFREQ_ENTRY_INVALID frequencies.
-Use arguments "pos" - a cpufreq_frequency_table * as a loop cursor and
-"table" - the cpufreq_frequency_table * you want to iterate over.
+Use arguments "pos" - a ``cpufreq_frequency_table *`` as a loop cursor and
+"table" - the ``cpufreq_frequency_table *`` you want to iterate over.
 
-For example:
+For example::
 
 	struct cpufreq_frequency_table *pos, *driver_freq_table;
 
diff --git a/Documentation/cpu-freq/index.rst b/Documentation/cpu-freq/index.rst
index 53501c58f41d..fcc58b2eee01 100644
--- a/Documentation/cpu-freq/index.rst
+++ b/Documentation/cpu-freq/index.rst
@@ -15,6 +15,7 @@ Author: Dominik Brodowski  <linux@brodo.de>
    :maxdepth: 1
 
    core
+   cpu-drivers
 
 Mailing List
 ------------
-- 
2.24.1

[PATCH v2 5/5] docs: cpu-freq: convert cpufreq-stats.txt to ReST

[Mauro Carvalho Chehab]

- Add a SPDX header;
- Add a document title, based on the original contents of
  cpu-freq/index.txt;
- Use lists where needed;
- Comment out the existing text-only index;
- Adjust some title marks;
- Use bold on some places;
- Mark literal blocks as such;
- Some whitespace fixes and new line breaks;
- Add it to cpu-freq/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../{cpufreq-stats.txt => cpufreq-stats.rst}  | 121 ++++++++++--------
 Documentation/cpu-freq/index.rst              |   1 +
 2 files changed, 66 insertions(+), 56 deletions(-)
 rename Documentation/cpu-freq/{cpufreq-stats.txt => cpufreq-stats.rst} (53%)

diff --git a/Documentation/cpu-freq/cpufreq-stats.txt b/Documentation/cpu-freq/cpufreq-stats.rst
similarity index 53%
rename from Documentation/cpu-freq/cpufreq-stats.txt
rename to Documentation/cpu-freq/cpufreq-stats.rst
index 14378cecb172..9ad695b1c7db 100644
--- a/Documentation/cpu-freq/cpufreq-stats.txt
+++ b/Documentation/cpu-freq/cpufreq-stats.rst
@@ -1,21 +1,23 @@
+.. SPDX-License-Identifier: GPL-2.0
 
-     CPU frequency and voltage scaling statistics in the Linux(TM) kernel
+==========================================
+General Description of sysfs CPUFreq Stats
+==========================================
 
+information for users
 
-             L i n u x    c p u f r e q - s t a t s   d r i v e r
 
-                       - information for users -
+Author: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
 
+.. Contents
 
-             Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
-
-Contents
-1. Introduction
-2. Statistics Provided (with example)
-3. Configuring cpufreq-stats
+   1. Introduction
+   2. Statistics Provided (with example)
+   3. Configuring cpufreq-stats
 
 
 1. Introduction
+===============
 
 cpufreq-stats is a driver that provides CPU frequency statistics for each CPU.
 These statistics are provided in /sysfs as a bunch of read_only interfaces. This
@@ -28,8 +30,10 @@ that may be running on your CPU. So, it will work with any cpufreq_driver.
 
 
 2. Statistics Provided (with example)
+=====================================
 
 cpufreq stats provides following statistics (explained in detail below).
+
 -  time_in_state
 -  total_trans
 -  trans_table
@@ -39,53 +43,57 @@ All the statistics will be from the time the stats driver has been inserted
 statistic is done. Obviously, stats driver will not have any information
 about the frequency transitions before the stats driver insertion.
 
---------------------------------------------------------------------------------
-<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # ls -l
-total 0
-drwxr-xr-x  2 root root    0 May 14 16:06 .
-drwxr-xr-x  3 root root    0 May 14 15:58 ..
---w-------  1 root root 4096 May 14 16:06 reset
--r--r--r--  1 root root 4096 May 14 16:06 time_in_state
--r--r--r--  1 root root 4096 May 14 16:06 total_trans
--r--r--r--  1 root root 4096 May 14 16:06 trans_table
---------------------------------------------------------------------------------
+::
+
+    <mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # ls -l
+    total 0
+    drwxr-xr-x  2 root root    0 May 14 16:06 .
+    drwxr-xr-x  3 root root    0 May 14 15:58 ..
+    --w-------  1 root root 4096 May 14 16:06 reset
+    -r--r--r--  1 root root 4096 May 14 16:06 time_in_state
+    -r--r--r--  1 root root 4096 May 14 16:06 total_trans
+    -r--r--r--  1 root root 4096 May 14 16:06 trans_table
+
+- **reset**
 
--  reset
 Write-only attribute that can be used to reset the stat counters. This can be
 useful for evaluating system behaviour under different governors without the
 need for a reboot.
 
--  time_in_state
+- **time_in_state**
+
 This gives the amount of time spent in each of the frequencies supported by
 this CPU. The cat output will have "<frequency> <time>" pair in each line, which
 will mean this CPU spent <time> usertime units of time at <frequency>. Output
-will have one line for each of the supported frequencies. usertime units here 
+will have one line for each of the supported frequencies. usertime units here
 is 10mS (similar to other time exported in /proc).
 
---------------------------------------------------------------------------------
-<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat time_in_state 
-3600000 2089
-3400000 136
-3200000 34
-3000000 67
-2800000 172488
---------------------------------------------------------------------------------
-
-
--  total_trans
-This gives the total number of frequency transitions on this CPU. The cat 
+::
+
+    <mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat time_in_state
+    3600000 2089
+    3400000 136
+    3200000 34
+    3000000 67
+    2800000 172488
+
+
+- **total_trans**
+
+This gives the total number of frequency transitions on this CPU. The cat
 output will have a single count which is the total number of frequency
 transitions.
 
---------------------------------------------------------------------------------
-<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat total_trans
-20
---------------------------------------------------------------------------------
+::
+
+    <mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat total_trans
+    20
+
+- **trans_table**
 
--  trans_table
 This will give a fine grained information about all the CPU frequency
 transitions. The cat output here is a two dimensional matrix, where an entry
-<i,j> (row i, column j) represents the count of number of transitions from 
+<i,j> (row i, column j) represents the count of number of transitions from
 Freq_i to Freq_j. Freq_i rows and Freq_j columns follow the sorting order in
 which the driver has provided the frequency table initially to the cpufreq core
 and so can be sorted (ascending or descending) or unsorted.  The output here
@@ -95,26 +103,27 @@ readability.
 If the transition table is bigger than PAGE_SIZE, reading this will
 return an -EFBIG error.
 
---------------------------------------------------------------------------------
-<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat trans_table
-   From  :    To
-         :   3600000   3400000   3200000   3000000   2800000 
-  3600000:         0         5         0         0         0 
-  3400000:         4         0         2         0         0 
-  3200000:         0         1         0         2         0 
-  3000000:         0         0         1         0         3 
-  2800000:         0         0         0         2         0 
---------------------------------------------------------------------------------
+::
 
+    <mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat trans_table
+    From  :    To
+	    :   3600000   3400000   3200000   3000000   2800000
+    3600000:         0         5         0         0         0
+    3400000:         4         0         2         0         0
+    3200000:         0         1         0         2         0
+    3000000:         0         0         1         0         3
+    2800000:         0         0         0         2         0
 
 3. Configuring cpufreq-stats
+============================
 
-To configure cpufreq-stats in your kernel
-Config Main Menu
-	Power management options (ACPI, APM)  --->
-		CPU Frequency scaling  --->
-			[*] CPU Frequency scaling
-			[*]   CPU frequency translation statistics
+To configure cpufreq-stats in your kernel::
+
+	Config Main Menu
+		Power management options (ACPI, APM)  --->
+			CPU Frequency scaling  --->
+				[*] CPU Frequency scaling
+				[*]   CPU frequency translation statistics
 
 
 "CPU Frequency scaling" (CONFIG_CPU_FREQ) should be enabled to configure
diff --git a/Documentation/cpu-freq/index.rst b/Documentation/cpu-freq/index.rst
index fcc58b2eee01..aba7831ab1cb 100644
--- a/Documentation/cpu-freq/index.rst
+++ b/Documentation/cpu-freq/index.rst
@@ -16,6 +16,7 @@ Author: Dominik Brodowski  <linux@brodo.de>
 
    core
    cpu-drivers
+   cpufreq-stats
 
 Mailing List
 ------------
-- 
2.24.1