[PATCH 0/5] Add support for some features on OnePlus One

[PATCH 0/5] Add support for some features on OnePlus One

[Luca Weiss]

Add support for the vibrator, volume keys, hall sensor, backlight and
notification LED to the device tree of the OnePlus One smartphone.

To: ~postmarketos/upstreaming@lists.sr.ht
To: phone-devel@vger.kernel.org
To: Andy Gross <agross@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>

---
Luca Weiss (5):
      ARM: dts: qcom: pm8941: Add vibrator node
      ARM: dts: qcom: msm8974-oneplus-bacon: Add vibrator
      ARM: dts: qcom: msm8974-oneplus-bacon: Add volume keys and hall sensor
      ARM: dts: qcom: msm8974-oneplus-bacon: Add backlight
      ARM: dts: qcom: msm8974-oneplus-bacon: Add notification LED

 .../arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts | 97 ++++++++++++++++++++++
 arch/arm/boot/dts/qcom-pm8941.dtsi                 |  6 ++
 2 files changed, 103 insertions(+)
---
base-commit: 2be7ea9924c3f827342d01ebbdf414df8ccf97d7
change-id: 20230122-msm8974-bacon-features-6c832aa94c87

Best regards,
-- 
Luca Weiss <luca@z3ntu.xyz>

[PATCH 1/5] ARM: dts: qcom: pm8941: Add vibrator node

[Luca Weiss]

Add the node describing the vibrator that's found on pm8941.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 arch/arm/boot/dts/qcom-pm8941.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index cd957a1e7cdf..a821f0368a28 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -161,6 +161,12 @@ pm8941_lpg: pwm {
 			status = "disabled";
 		};
 
+		pm8941_vib: vibrator@c000 {
+			compatible = "qcom,pm8916-vib";
+			reg = <0xc000>;
+			status = "disabled";
+		};
+
 		pm8941_wled: wled@d800 {
 			compatible = "qcom,pm8941-wled";
 			reg = <0xd800>;

-- 
2.39.1

Re: [PATCH 1/5] ARM: dts: qcom: pm8941: Add vibrator node

[Konrad Dybcio]

On 22.01.2023 17:48, Luca Weiss wrote:
> Add the node describing the vibrator that's found on pm8941.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm/boot/dts/qcom-pm8941.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
> index cd957a1e7cdf..a821f0368a28 100644
> --- a/arch/arm/boot/dts/qcom-pm8941.dtsi
> +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
> @@ -161,6 +161,12 @@ pm8941_lpg: pwm {
>  			status = "disabled";
>  		};
>  
> +		pm8941_vib: vibrator@c000 {
> +			compatible = "qcom,pm8916-vib";
> +			reg = <0xc000>;
> +			status = "disabled";
> +		};
> +
>  		pm8941_wled: wled@d800 {
>  			compatible = "qcom,pm8941-wled";
>  			reg = <0xd800>;
> 

[PATCH 2/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add vibrator

[Luca Weiss]

Enable the pm8941 vibrator that's wired up on this device.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
index b5606623f968..63180fe1d292 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
@@ -95,6 +95,10 @@ &pm8941_coincell {
 	status = "okay";
 };
 
+&pm8941_vib {
+	status = "okay";
+};
+
 &pronto {
 	vddmx-supply = <&pm8841_s1>;
 	vddcx-supply = <&pm8841_s2>;

-- 
2.39.1

Re: [PATCH 2/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add vibrator

[Konrad Dybcio]

On 22.01.2023 17:48, Luca Weiss wrote:
> Enable the pm8941 vibrator that's wired up on this device.
So this commit adds some wires inside.. ;)

> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> index b5606623f968..63180fe1d292 100644
> --- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> @@ -95,6 +95,10 @@ &pm8941_coincell {
>  	status = "okay";
>  };
>  
> +&pm8941_vib {
> +	status = "okay";
> +};
> +
>  &pronto {
>  	vddmx-supply = <&pm8841_s1>;
>  	vddcx-supply = <&pm8841_s2>;
> 

[PATCH 3/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add volume keys and hall sensor

[Luca Weiss]

Add nodes for the volume buttons and the hall sensor that are found on
the device.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 .../arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts | 50 ++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
index 63180fe1d292..10ba3c94e26d 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
@@ -19,6 +19,38 @@ aliases {
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>, <&gpio_hall_sensor_default>;
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			debounce-interval = <150>;
+		};
+	};
 };
 
 &blsp1_i2c1 {
@@ -95,6 +127,17 @@ &pm8941_coincell {
 	status = "okay";
 };
 
+&pm8941_gpios {
+	gpio_keys_default: gpio-keys-active-state {
+		pins = "gpio2", "gpio5";
+		function = "normal";
+
+		input-enable;
+		bias-disable;
+		power-source = <PM8941_GPIO_S3>;
+	};
+};
+
 &pm8941_vib {
 	status = "okay";
 };
@@ -349,6 +392,13 @@ &sdhc_1 {
 };
 
 &tlmm {
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio68";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
 	sdc1_on: sdc1-on-state {
 		clk-pins {
 			pins = "sdc1_clk";

-- 
2.39.1

Re: [PATCH 3/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add volume keys and hall sensor

[Konrad Dybcio]

On 22.01.2023 17:48, Luca Weiss wrote:
> Add nodes for the volume buttons and the hall sensor that are found on
> the device.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
>  .../arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts | 50 ++++++++++++++++++++++
>  1 file changed, 50 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> index 63180fe1d292..10ba3c94e26d 100644
> --- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> @@ -19,6 +19,38 @@ aliases {
>  	chosen {
>  		stdout-path = "serial0:115200n8";
>  	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&gpio_keys_default>, <&gpio_hall_sensor_default>;
pinctrl-N
pinctrl-names

please

> +
> +		key-volume-down {
> +			label = "Volume Down";
> +			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_VOLUMEDOWN>;
> +			wakeup-source;
> +			debounce-interval = <15>;
> +		};
> +
> +		key-volume-up {
> +			label = "Volume Up";
> +			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_VOLUMEUP>;
> +			wakeup-source;
> +			debounce-interval = <15>;
> +		};
> +
> +		event-hall-sensor {
> +			label = "Hall Effect Sensor";
> +			gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
> +			linux,input-type = <EV_SW>;
> +			linux,code = <SW_LID>;
> +			linux,can-disable;
> +			debounce-interval = <150>;
> +		};
> +	};
>  };
>  
>  &blsp1_i2c1 {
> @@ -95,6 +127,17 @@ &pm8941_coincell {
>  	status = "okay";
>  };
>  
> +&pm8941_gpios {
> +	gpio_keys_default: gpio-keys-active-state {
> +		pins = "gpio2", "gpio5";
> +		function = "normal";
> +
Unnecessary newline

Konrad
> +		input-enable;
> +		bias-disable;
> +		power-source = <PM8941_GPIO_S3>;
> +	};
> +};
> +
>  &pm8941_vib {
>  	status = "okay";
>  };
> @@ -349,6 +392,13 @@ &sdhc_1 {
>  };
>  
>  &tlmm {
> +	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
> +		pins = "gpio68";
> +		function = "gpio";
> +		drive-strength = <8>;
> +		bias-pull-up;
> +	};
> +
>  	sdc1_on: sdc1-on-state {
>  		clk-pins {
>  			pins = "sdc1_clk";
> 

[PATCH 4/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add backlight

[Luca Weiss]

Add the node for the lm3630 that is used to control backlight.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
index 10ba3c94e26d..ffb486ceb6a6 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
@@ -99,6 +99,21 @@ rmi4-f12@12 {
 			syna,clip-y-high = <1920>;
 		};
 	};
+
+	led-controller@36 {
+		compatible = "ti,lm3630a";
+		reg = <0x36>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0 1>;
+			label = "lcd-backlight";
+			default-brightness = <80>;
+		};
+	};
 };
 
 &blsp1_i2c6 {

-- 
2.39.1

Re: [PATCH 4/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add backlight

[Konrad Dybcio]

On 22.01.2023 17:48, Luca Weiss wrote:
> Add the node for the lm3630 that is used to control backlight.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> index 10ba3c94e26d..ffb486ceb6a6 100644
> --- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> @@ -99,6 +99,21 @@ rmi4-f12@12 {
>  			syna,clip-y-high = <1920>;
>  		};
>  	};
> +
> +	led-controller@36 {
> +		compatible = "ti,lm3630a";
> +		reg = <0x36>;
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		led@0 {
> +			reg = <0>;
> +			led-sources = <0 1>;
> +			label = "lcd-backlight";
> +			default-brightness = <80>;
> +		};
> +	};
>  };
>  
>  &blsp1_i2c6 {
> 

[PATCH 5/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add notification LED

[Luca Weiss]

Add the node describing the sn3193 that's used to provide notification
LED.

Unfortunately the driver currently supports neither multicolor API nor
using the properties function & color, so we use label instead.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 .../arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts | 28 ++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
index ffb486ceb6a6..a672c45d7070 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
@@ -114,6 +114,34 @@ led@0 {
 			default-brightness = <80>;
 		};
 	};
+
+	led-controller@68 {
+		compatible = "si-en,sn3193";
+		reg = <0x68>;
+
+		shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			label = "red:status";
+			led-max-microamp = <17500>;
+		};
+
+		led@2 {
+			reg = <2>;
+			label = "green:status";
+			led-max-microamp = <17500>;
+		};
+
+		led@3 {
+			reg = <3>;
+			label = "blue:status";
+			led-max-microamp = <17500>;
+		};
+	};
 };
 
 &blsp1_i2c6 {

-- 
2.39.1

Re: [PATCH 5/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add notification LED

[Konrad Dybcio]

On 22.01.2023 17:48, Luca Weiss wrote:
> Add the node describing the sn3193 that's used to provide notification
> LED.
> 
> Unfortunately the driver currently supports neither multicolor API nor
> using the properties function & color, so we use label instead.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  .../arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts | 28 ++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> index ffb486ceb6a6..a672c45d7070 100644
> --- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> @@ -114,6 +114,34 @@ led@0 {
>  			default-brightness = <80>;
>  		};
>  	};
> +
> +	led-controller@68 {
> +		compatible = "si-en,sn3193";
> +		reg = <0x68>;
> +
> +		shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		led@1 {
> +			reg = <1>;
> +			label = "red:status";
> +			led-max-microamp = <17500>;
> +		};
> +
> +		led@2 {
> +			reg = <2>;
> +			label = "green:status";
> +			led-max-microamp = <17500>;
> +		};
> +
> +		led@3 {
> +			reg = <3>;
> +			label = "blue:status";
> +			led-max-microamp = <17500>;
> +		};
> +	};
>  };
>  
>  &blsp1_i2c6 {
> 

Re: [PATCH 5/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add notification LED

[Krzysztof Kozlowski]

On 22/01/2023 17:48, Luca Weiss wrote:
> Add the node describing the sn3193 that's used to provide notification
> LED.
> 
> Unfortunately the driver currently supports neither multicolor API nor
> using the properties function & color, so we use label instead.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
>  .../arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts | 28 ++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> index ffb486ceb6a6..a672c45d7070 100644
> --- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> @@ -114,6 +114,34 @@ led@0 {
>  			default-brightness = <80>;
>  		};
>  	};
> +
> +	led-controller@68 {
> +		compatible = "si-en,sn3193";
> +		reg = <0x68>;
> +
> +		shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		led@1 {
> +			reg = <1>;
> +			label = "red:status";

These should be colors and functions.


Best regards,
Krzysztof

Re: [PATCH 5/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add notification LED

[Luca Weiss]

On Montag, 23. Jänner 2023 18:18:16 CET Krzysztof Kozlowski wrote:
> On 22/01/2023 17:48, Luca Weiss wrote:
> > Add the node describing the sn3193 that's used to provide notification
> > LED.
> > 
> > Unfortunately the driver currently supports neither multicolor API nor
> > using the properties function & color, so we use label instead.
> > 
> > Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> > ---
> > 
> >  .../arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts | 28
> >  ++++++++++++++++++++++ 1 file changed, 28 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> > b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts index
> > ffb486ceb6a6..a672c45d7070 100644
> > --- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> > +++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> > @@ -114,6 +114,34 @@ led@0 {
> > 
> >  			default-brightness = <80>;
> >  		
> >  		};
> >  	
> >  	};
> > 
> > +
> > +	led-controller@68 {
> > +		compatible = "si-en,sn3193";
> > +		reg = <0x68>;
> > +
> > +		shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
> > +
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		led@1 {
> > +			reg = <1>;
> > +			label = "red:status";
> 
> These should be colors and functions.

Hi Krzysztof,

please check the commit message for this. I tried using it but it didn't work, 
the driver in general might need an overhaul at some point...

> Unfortunately the driver currently supports neither multicolor API nor
> using the properties function & color, so we use label instead.

Or maybe I messed up but pretty sure this was the case when I wrote the dts.

Regards
Luca

> 
> 
> Best regards,
> Krzysztof

Re: [PATCH 5/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add notification LED

[Krzysztof Kozlowski]

On 25/01/2023 21:51, Luca Weiss wrote:
> On Montag, 23. Jänner 2023 18:18:16 CET Krzysztof Kozlowski wrote:
>> On 22/01/2023 17:48, Luca Weiss wrote:
>>> Add the node describing the sn3193 that's used to provide notification
>>> LED.
>>>
>>> Unfortunately the driver currently supports neither multicolor API nor
>>> using the properties function & color, so we use label instead.
>>>
>>> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
>>> ---
>>>
>>>  .../arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts | 28
>>>  ++++++++++++++++++++++ 1 file changed, 28 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
>>> b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts index
>>> ffb486ceb6a6..a672c45d7070 100644
>>> --- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
>>> +++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
>>> @@ -114,6 +114,34 @@ led@0 {
>>>
>>>  			default-brightness = <80>;
>>>  		
>>>  		};
>>>  	
>>>  	};
>>>
>>> +
>>> +	led-controller@68 {
>>> +		compatible = "si-en,sn3193";
>>> +		reg = <0x68>;
>>> +
>>> +		shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
>>> +
>>> +		#address-cells = <1>;
>>> +		#size-cells = <0>;
>>> +
>>> +		led@1 {
>>> +			reg = <1>;
>>> +			label = "red:status";
>>
>> These should be colors and functions.
> 
> Hi Krzysztof,
> 
> please check the commit message for this. I tried using it but it didn't work, 
> the driver in general might need an overhaul at some point...
> 
>> Unfortunately the driver currently supports neither multicolor API nor
>> using the properties function & color, so we use label instead.
> 
> Or maybe I messed up but pretty sure this was the case when I wrote the dts.

I don't understand how driver is related here - it's not the driver's
property, but LED core. If the driver "supports" label, then it supports
color and status.

Best regards,
Krzysztof

Re: [PATCH 5/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add notification LED

[Luca Weiss]

On Donnerstag, 26. Jänner 2023 10:41:24 CET Krzysztof Kozlowski wrote:
> On 25/01/2023 21:51, Luca Weiss wrote:
> > On Montag, 23. Jänner 2023 18:18:16 CET Krzysztof Kozlowski wrote:
> >> On 22/01/2023 17:48, Luca Weiss wrote:
> >>> Add the node describing the sn3193 that's used to provide notification
> >>> LED.
> >>> 
> >>> Unfortunately the driver currently supports neither multicolor API nor
> >>> using the properties function & color, so we use label instead.
> >>> 
> >>> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> >>> ---
> >>> 
> >>>  .../arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts | 28
> >>>  ++++++++++++++++++++++ 1 file changed, 28 insertions(+)
> >>> 
> >>> diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> >>> b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts index
> >>> ffb486ceb6a6..a672c45d7070 100644
> >>> --- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> >>> +++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> >>> @@ -114,6 +114,34 @@ led@0 {
> >>> 
> >>>  			default-brightness = <80>;
> >>>  		
> >>>  		};
> >>>  	
> >>>  	};
> >>> 
> >>> +
> >>> +	led-controller@68 {
> >>> +		compatible = "si-en,sn3193";
> >>> +		reg = <0x68>;
> >>> +
> >>> +		shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
> >>> +
> >>> +		#address-cells = <1>;
> >>> +		#size-cells = <0>;
> >>> +
> >>> +		led@1 {
> >>> +			reg = <1>;
> >>> +			label = "red:status";
> >> 
> >> These should be colors and functions.
> > 
> > Hi Krzysztof,
> > 
> > please check the commit message for this. I tried using it but it didn't
> > work, the driver in general might need an overhaul at some point...
> > 
> >> Unfortunately the driver currently supports neither multicolor API nor
> >> using the properties function & color, so we use label instead.
> > 
> > Or maybe I messed up but pretty sure this was the case when I wrote the
> > dts.
> I don't understand how driver is related here - it's not the driver's
> property, but LED core. If the driver "supports" label, then it supports
> color and status.

The leds-is31fl319x.c driver uses devm_led_classdev_register but the function 
where 'function' and 'color' is parsed is led_parse_fwnode_props which is 
called from led_compose_name which is called from led_classdev_register_ext 
(or with the devm_ prefix), and not called from the register method without 
_ext suffix.

So in other words, the led driver would need changes to use the new 
registration API to be able to use 'function' and 'color' instead of 'label'.

Regards
Luca

> 
> Best regards,
> Krzysztof

Re: [PATCH 5/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add notification LED

[Krzysztof Kozlowski]

On 26/01/2023 21:41, Luca Weiss wrote:
> On Donnerstag, 26. Jänner 2023 10:41:24 CET Krzysztof Kozlowski wrote:
>> On 25/01/2023 21:51, Luca Weiss wrote:
>>> On Montag, 23. Jänner 2023 18:18:16 CET Krzysztof Kozlowski wrote:
>>>> On 22/01/2023 17:48, Luca Weiss wrote:
>>>>> Add the node describing the sn3193 that's used to provide notification
>>>>> LED.
>>>>>
>>>>> Unfortunately the driver currently supports neither multicolor API nor
>>>>> using the properties function & color, so we use label instead.
>>>>>
>>>>> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
>>>>> ---
>>>>>
>>>>>  .../arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts | 28
>>>>>  ++++++++++++++++++++++ 1 file changed, 28 insertions(+)
>>>>>
>>>>> diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
>>>>> b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts index
>>>>> ffb486ceb6a6..a672c45d7070 100644
>>>>> --- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
>>>>> +++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
>>>>> @@ -114,6 +114,34 @@ led@0 {
>>>>>
>>>>>  			default-brightness = <80>;
>>>>>  		
>>>>>  		};
>>>>>  	
>>>>>  	};
>>>>>
>>>>> +
>>>>> +	led-controller@68 {
>>>>> +		compatible = "si-en,sn3193";
>>>>> +		reg = <0x68>;
>>>>> +
>>>>> +		shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
>>>>> +
>>>>> +		#address-cells = <1>;
>>>>> +		#size-cells = <0>;
>>>>> +
>>>>> +		led@1 {
>>>>> +			reg = <1>;
>>>>> +			label = "red:status";
>>>>
>>>> These should be colors and functions.
>>>
>>> Hi Krzysztof,
>>>
>>> please check the commit message for this. I tried using it but it didn't
>>> work, the driver in general might need an overhaul at some point...
>>>
>>>> Unfortunately the driver currently supports neither multicolor API nor
>>>> using the properties function & color, so we use label instead.
>>>
>>> Or maybe I messed up but pretty sure this was the case when I wrote the
>>> dts.
>> I don't understand how driver is related here - it's not the driver's
>> property, but LED core. If the driver "supports" label, then it supports
>> color and status.
> 
> The leds-is31fl319x.c driver uses devm_led_classdev_register but the function 
> where 'function' and 'color' is parsed is led_parse_fwnode_props which is 
> called from led_compose_name which is called from led_classdev_register_ext 
> (or with the devm_ prefix), and not called from the register method without 
> _ext suffix.

No, devm_led_classdev_register calls devm_led_classdev_register_ext
which calls led_classdev_register_ext which calls led_compose_name (if
initdata is set). The point is that we lack initdata, so indeed color
and function cannot be used.

> 
> So in other words, the led driver would need changes to use the new 
> registration API to be able to use 'function' and 'color' instead of 'label'.
> 
> Regards
> Luca
> 
>>
>> Best regards,
>> Krzysztof
> 
> 
> 
> 

Best regards,
Krzysztof

Re: [PATCH 5/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add notification LED

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1377 bytes --]

Hi!

> > Unfortunately the driver currently supports neither multicolor API nor
> > using the properties function & color, so we use label instead.
> > 
> > Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> > ---
> >  .../arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts | 28 ++++++++++++++++++++++
> >  1 file changed, 28 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> > index ffb486ceb6a6..a672c45d7070 100644
> > --- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> > +++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> > @@ -114,6 +114,34 @@ led@0 {
> >  			default-brightness = <80>;
> >  		};
> >  	};
> > +
> > +	led-controller@68 {
> > +		compatible = "si-en,sn3193";
> > +		reg = <0x68>;
> > +
> > +		shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
> > +
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		led@1 {
> > +			reg = <1>;
> > +			label = "red:status";
> 
> These should be colors and functions.

Yep. Plus this is one LED, not three, so it should use the multicolor
class.

And then we should have an entry in
Documentation/leds/well-known-leds.txt so that we have same ABI on all
the phones.

Best regards,
								Pavel
-- 
People of Russia, stop Putin before his war on Ukraine escalates.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]