* [PATCH] Initialize ATA before graphics
@ 2020-02-24 14:09 ` Paul Menzel
0 siblings, 0 replies; 8+ messages in thread
From: Paul Menzel @ 2020-02-24 14:09 UTC (permalink / raw)
To: David Airlie, Daniel Vetter, Hans de Goede, Jens Axboe,
Christoph Hellwig, Keith Busch, Sagi Grimberg, LKML
Cc: dri-devel, linux-fbdev, linux-ide, linux-nvme, LKML
[-- Attachment #1: Type: text/plain, Size: 1976 bytes --]
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Thu, 2 Jun 2016 23:36:32 -0500
ATA init is the long pole in the boot process, and its asynchronous.
Move the graphics init after it, so that ATA and graphics initialize
in parallel.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
---
1. Taken from Clear Linux: https://github.com/clearlinux-pkgs/linux/commits/master/0110-Initialize-ata-before-graphics.patch
2. Arjan, can you please add your Signed-off-by line?
drivers/Makefile | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/Makefile b/drivers/Makefile
index aaef17c..d08f3a3 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -58,15 +58,8 @@ obj-y += char/
# iommu/ comes before gpu as gpu are using iommu controllers
obj-y += iommu/
-# gpu/ comes after char for AGP vs DRM startup and after iommu
-obj-y += gpu/
-
obj-$(CONFIG_CONNECTOR) += connector/
-# i810fb and intelfb depend on char/agp/
-obj-$(CONFIG_FB_I810) += video/fbdev/i810/
-obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
-
obj-$(CONFIG_PARPORT) += parport/
obj-$(CONFIG_NVM) += lightnvm/
obj-y += base/ block/ misc/ mfd/ nfc/
@@ -79,6 +72,14 @@ obj-$(CONFIG_IDE) += ide/
obj-y += scsi/
obj-y += nvme/
obj-$(CONFIG_ATA) += ata/
+
+# gpu/ comes after char for AGP vs DRM startup and after iommu
+obj-y += gpu/
+
+# i810fb and intelfb depend on char/agp/
+obj-$(CONFIG_FB_I810) += video/fbdev/i810/
+obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
+
obj-$(CONFIG_TARGET_CORE) += target/
obj-$(CONFIG_MTD) += mtd/
obj-$(CONFIG_SPI) += spi/
--
https://clearlinux.org
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH] Initialize ATA before graphics
@ 2020-02-24 14:09 ` Paul Menzel
0 siblings, 0 replies; 8+ messages in thread
From: Paul Menzel @ 2020-02-24 14:09 UTC (permalink / raw)
To: David Airlie, Daniel Vetter, Hans de Goede, Jens Axboe,
Christoph Hellwig, Keith Busch, Sagi Grimberg, LKML
Cc: linux-ide, linux-fbdev, linux-nvme, dri-devel
[-- Attachment #1: Type: text/plain, Size: 1976 bytes --]
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Thu, 2 Jun 2016 23:36:32 -0500
ATA init is the long pole in the boot process, and its asynchronous.
Move the graphics init after it, so that ATA and graphics initialize
in parallel.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
---
1. Taken from Clear Linux: https://github.com/clearlinux-pkgs/linux/commits/master/0110-Initialize-ata-before-graphics.patch
2. Arjan, can you please add your Signed-off-by line?
drivers/Makefile | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/Makefile b/drivers/Makefile
index aaef17c..d08f3a3 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -58,15 +58,8 @@ obj-y += char/
# iommu/ comes before gpu as gpu are using iommu controllers
obj-y += iommu/
-# gpu/ comes after char for AGP vs DRM startup and after iommu
-obj-y += gpu/
-
obj-$(CONFIG_CONNECTOR) += connector/
-# i810fb and intelfb depend on char/agp/
-obj-$(CONFIG_FB_I810) += video/fbdev/i810/
-obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
-
obj-$(CONFIG_PARPORT) += parport/
obj-$(CONFIG_NVM) += lightnvm/
obj-y += base/ block/ misc/ mfd/ nfc/
@@ -79,6 +72,14 @@ obj-$(CONFIG_IDE) += ide/
obj-y += scsi/
obj-y += nvme/
obj-$(CONFIG_ATA) += ata/
+
+# gpu/ comes after char for AGP vs DRM startup and after iommu
+obj-y += gpu/
+
+# i810fb and intelfb depend on char/agp/
+obj-$(CONFIG_FB_I810) += video/fbdev/i810/
+obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
+
obj-$(CONFIG_TARGET_CORE) += target/
obj-$(CONFIG_MTD) += mtd/
obj-$(CONFIG_SPI) += spi/
--
https://clearlinux.org
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH] Initialize ATA before graphics
@ 2020-02-24 14:09 ` Paul Menzel
0 siblings, 0 replies; 8+ messages in thread
From: Paul Menzel @ 2020-02-24 14:09 UTC (permalink / raw)
To: David Airlie, Daniel Vetter, Hans de Goede, Jens Axboe,
Christoph Hellwig, Keith Busch, Sagi Grimberg, LKML
Cc: linux-ide, linux-fbdev, linux-nvme, dri-devel, LKML
[-- Attachment #1.1: Type: text/plain, Size: 1976 bytes --]
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Thu, 2 Jun 2016 23:36:32 -0500
ATA init is the long pole in the boot process, and its asynchronous.
Move the graphics init after it, so that ATA and graphics initialize
in parallel.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
---
1. Taken from Clear Linux: https://github.com/clearlinux-pkgs/linux/commits/master/0110-Initialize-ata-before-graphics.patch
2. Arjan, can you please add your Signed-off-by line?
drivers/Makefile | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/Makefile b/drivers/Makefile
index aaef17c..d08f3a3 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -58,15 +58,8 @@ obj-y += char/
# iommu/ comes before gpu as gpu are using iommu controllers
obj-y += iommu/
-# gpu/ comes after char for AGP vs DRM startup and after iommu
-obj-y += gpu/
-
obj-$(CONFIG_CONNECTOR) += connector/
-# i810fb and intelfb depend on char/agp/
-obj-$(CONFIG_FB_I810) += video/fbdev/i810/
-obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
-
obj-$(CONFIG_PARPORT) += parport/
obj-$(CONFIG_NVM) += lightnvm/
obj-y += base/ block/ misc/ mfd/ nfc/
@@ -79,6 +72,14 @@ obj-$(CONFIG_IDE) += ide/
obj-y += scsi/
obj-y += nvme/
obj-$(CONFIG_ATA) += ata/
+
+# gpu/ comes after char for AGP vs DRM startup and after iommu
+obj-y += gpu/
+
+# i810fb and intelfb depend on char/agp/
+obj-$(CONFIG_FB_I810) += video/fbdev/i810/
+obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
+
obj-$(CONFIG_TARGET_CORE) += target/
obj-$(CONFIG_MTD) += mtd/
obj-$(CONFIG_SPI) += spi/
--
https://clearlinux.org
[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]
[-- Attachment #2: Type: text/plain, Size: 158 bytes --]
_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH] Initialize ATA before graphics
@ 2020-02-24 14:09 ` Paul Menzel
0 siblings, 0 replies; 8+ messages in thread
From: Paul Menzel @ 2020-02-24 14:09 UTC (permalink / raw)
To: David Airlie, Daniel Vetter, Hans de Goede, Jens Axboe,
Christoph Hellwig, Keith Busch, Sagi Grimberg, LKML
Cc: linux-ide, linux-fbdev, linux-nvme, dri-devel, LKML
[-- Attachment #1.1: Type: text/plain, Size: 1976 bytes --]
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Thu, 2 Jun 2016 23:36:32 -0500
ATA init is the long pole in the boot process, and its asynchronous.
Move the graphics init after it, so that ATA and graphics initialize
in parallel.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
---
1. Taken from Clear Linux: https://github.com/clearlinux-pkgs/linux/commits/master/0110-Initialize-ata-before-graphics.patch
2. Arjan, can you please add your Signed-off-by line?
drivers/Makefile | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/Makefile b/drivers/Makefile
index aaef17c..d08f3a3 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -58,15 +58,8 @@ obj-y += char/
# iommu/ comes before gpu as gpu are using iommu controllers
obj-y += iommu/
-# gpu/ comes after char for AGP vs DRM startup and after iommu
-obj-y += gpu/
-
obj-$(CONFIG_CONNECTOR) += connector/
-# i810fb and intelfb depend on char/agp/
-obj-$(CONFIG_FB_I810) += video/fbdev/i810/
-obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
-
obj-$(CONFIG_PARPORT) += parport/
obj-$(CONFIG_NVM) += lightnvm/
obj-y += base/ block/ misc/ mfd/ nfc/
@@ -79,6 +72,14 @@ obj-$(CONFIG_IDE) += ide/
obj-y += scsi/
obj-y += nvme/
obj-$(CONFIG_ATA) += ata/
+
+# gpu/ comes after char for AGP vs DRM startup and after iommu
+obj-y += gpu/
+
+# i810fb and intelfb depend on char/agp/
+obj-$(CONFIG_FB_I810) += video/fbdev/i810/
+obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
+
obj-$(CONFIG_TARGET_CORE) += target/
obj-$(CONFIG_MTD) += mtd/
obj-$(CONFIG_SPI) += spi/
--
https://clearlinux.org
[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH] Initialize ATA before graphics
2020-02-24 14:09 ` Paul Menzel
(?)
(?)
@ 2020-02-25 16:33 ` Randy Dunlap
-1 siblings, 0 replies; 8+ messages in thread
From: Randy Dunlap @ 2020-02-25 16:33 UTC (permalink / raw)
To: Paul Menzel, David Airlie, Daniel Vetter, Hans de Goede,
Jens Axboe, Christoph Hellwig, Keith Busch, Sagi Grimberg, LKML
Cc: dri-devel, linux-fbdev, linux-ide, linux-nvme, Arjan van de Ven
Hi Paul,
You should have also Cc-ed Arjan on this email. [done]
On 2/24/20 6:09 AM, Paul Menzel wrote:
> From: Arjan van de Ven <arjan@linux.intel.com>
> Date: Thu, 2 Jun 2016 23:36:32 -0500
>
> ATA init is the long pole in the boot process, and its asynchronous.
> Move the graphics init after it, so that ATA and graphics initialize
> in parallel.
>
> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
> ---
>
> 1. Taken from Clear Linux: https://github.com/clearlinux-pkgs/linux/commits/master/0110-Initialize-ata-before-graphics.patch
> 2. Arjan, can you please add your Signed-off-by line?
>
> drivers/Makefile | 15 ++++++++-------
> 1 file changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/Makefile b/drivers/Makefile
> index aaef17c..d08f3a3 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -58,15 +58,8 @@ obj-y += char/
> # iommu/ comes before gpu as gpu are using iommu controllers
> obj-y += iommu/
>
> -# gpu/ comes after char for AGP vs DRM startup and after iommu
> -obj-y += gpu/
> -
> obj-$(CONFIG_CONNECTOR) += connector/
>
> -# i810fb and intelfb depend on char/agp/
> -obj-$(CONFIG_FB_I810) += video/fbdev/i810/
> -obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
> -
> obj-$(CONFIG_PARPORT) += parport/
> obj-$(CONFIG_NVM) += lightnvm/
> obj-y += base/ block/ misc/ mfd/ nfc/
> @@ -79,6 +72,14 @@ obj-$(CONFIG_IDE) += ide/
> obj-y += scsi/
> obj-y += nvme/
> obj-$(CONFIG_ATA) += ata/
> +
> +# gpu/ comes after char for AGP vs DRM startup and after iommu
> +obj-y += gpu/
> +
> +# i810fb and intelfb depend on char/agp/
> +obj-$(CONFIG_FB_I810) += video/fbdev/i810/
> +obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
> +
> obj-$(CONFIG_TARGET_CORE) += target/
> obj-$(CONFIG_MTD) += mtd/
> obj-$(CONFIG_SPI) += spi/
>
--
~Randy
Reported-by: Randy Dunlap <rdunlap@infradead.org>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] Initialize ATA before graphics
@ 2020-02-25 16:33 ` Randy Dunlap
0 siblings, 0 replies; 8+ messages in thread
From: Randy Dunlap @ 2020-02-25 16:33 UTC (permalink / raw)
To: Paul Menzel, David Airlie, Daniel Vetter, Hans de Goede,
Jens Axboe, Christoph Hellwig, Keith Busch, Sagi Grimberg, LKML
Cc: linux-ide, linux-fbdev, Arjan van de Ven, linux-nvme, dri-devel
Hi Paul,
You should have also Cc-ed Arjan on this email. [done]
On 2/24/20 6:09 AM, Paul Menzel wrote:
> From: Arjan van de Ven <arjan@linux.intel.com>
> Date: Thu, 2 Jun 2016 23:36:32 -0500
>
> ATA init is the long pole in the boot process, and its asynchronous.
> Move the graphics init after it, so that ATA and graphics initialize
> in parallel.
>
> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
> ---
>
> 1. Taken from Clear Linux: https://github.com/clearlinux-pkgs/linux/commits/master/0110-Initialize-ata-before-graphics.patch
> 2. Arjan, can you please add your Signed-off-by line?
>
> drivers/Makefile | 15 ++++++++-------
> 1 file changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/Makefile b/drivers/Makefile
> index aaef17c..d08f3a3 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -58,15 +58,8 @@ obj-y += char/
> # iommu/ comes before gpu as gpu are using iommu controllers
> obj-y += iommu/
>
> -# gpu/ comes after char for AGP vs DRM startup and after iommu
> -obj-y += gpu/
> -
> obj-$(CONFIG_CONNECTOR) += connector/
>
> -# i810fb and intelfb depend on char/agp/
> -obj-$(CONFIG_FB_I810) += video/fbdev/i810/
> -obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
> -
> obj-$(CONFIG_PARPORT) += parport/
> obj-$(CONFIG_NVM) += lightnvm/
> obj-y += base/ block/ misc/ mfd/ nfc/
> @@ -79,6 +72,14 @@ obj-$(CONFIG_IDE) += ide/
> obj-y += scsi/
> obj-y += nvme/
> obj-$(CONFIG_ATA) += ata/
> +
> +# gpu/ comes after char for AGP vs DRM startup and after iommu
> +obj-y += gpu/
> +
> +# i810fb and intelfb depend on char/agp/
> +obj-$(CONFIG_FB_I810) += video/fbdev/i810/
> +obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
> +
> obj-$(CONFIG_TARGET_CORE) += target/
> obj-$(CONFIG_MTD) += mtd/
> obj-$(CONFIG_SPI) += spi/
>
--
~Randy
Reported-by: Randy Dunlap <rdunlap@infradead.org>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] Initialize ATA before graphics
@ 2020-02-25 16:33 ` Randy Dunlap
0 siblings, 0 replies; 8+ messages in thread
From: Randy Dunlap @ 2020-02-25 16:33 UTC (permalink / raw)
To: Paul Menzel, David Airlie, Daniel Vetter, Hans de Goede,
Jens Axboe, Christoph Hellwig, Keith Busch, Sagi Grimberg, LKML
Cc: linux-ide, linux-fbdev, Arjan van de Ven, linux-nvme, dri-devel
Hi Paul,
You should have also Cc-ed Arjan on this email. [done]
On 2/24/20 6:09 AM, Paul Menzel wrote:
> From: Arjan van de Ven <arjan@linux.intel.com>
> Date: Thu, 2 Jun 2016 23:36:32 -0500
>
> ATA init is the long pole in the boot process, and its asynchronous.
> Move the graphics init after it, so that ATA and graphics initialize
> in parallel.
>
> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
> ---
>
> 1. Taken from Clear Linux: https://github.com/clearlinux-pkgs/linux/commits/master/0110-Initialize-ata-before-graphics.patch
> 2. Arjan, can you please add your Signed-off-by line?
>
> drivers/Makefile | 15 ++++++++-------
> 1 file changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/Makefile b/drivers/Makefile
> index aaef17c..d08f3a3 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -58,15 +58,8 @@ obj-y += char/
> # iommu/ comes before gpu as gpu are using iommu controllers
> obj-y += iommu/
>
> -# gpu/ comes after char for AGP vs DRM startup and after iommu
> -obj-y += gpu/
> -
> obj-$(CONFIG_CONNECTOR) += connector/
>
> -# i810fb and intelfb depend on char/agp/
> -obj-$(CONFIG_FB_I810) += video/fbdev/i810/
> -obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
> -
> obj-$(CONFIG_PARPORT) += parport/
> obj-$(CONFIG_NVM) += lightnvm/
> obj-y += base/ block/ misc/ mfd/ nfc/
> @@ -79,6 +72,14 @@ obj-$(CONFIG_IDE) += ide/
> obj-y += scsi/
> obj-y += nvme/
> obj-$(CONFIG_ATA) += ata/
> +
> +# gpu/ comes after char for AGP vs DRM startup and after iommu
> +obj-y += gpu/
> +
> +# i810fb and intelfb depend on char/agp/
> +obj-$(CONFIG_FB_I810) += video/fbdev/i810/
> +obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
> +
> obj-$(CONFIG_TARGET_CORE) += target/
> obj-$(CONFIG_MTD) += mtd/
> obj-$(CONFIG_SPI) += spi/
>
--
~Randy
Reported-by: Randy Dunlap <rdunlap@infradead.org>
_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] Initialize ATA before graphics
@ 2020-02-25 16:33 ` Randy Dunlap
0 siblings, 0 replies; 8+ messages in thread
From: Randy Dunlap @ 2020-02-25 16:33 UTC (permalink / raw)
To: Paul Menzel, David Airlie, Daniel Vetter, Hans de Goede,
Jens Axboe, Christoph Hellwig, Keith Busch, Sagi Grimberg, LKML
Cc: linux-ide, linux-fbdev, Arjan van de Ven, linux-nvme, dri-devel
Hi Paul,
You should have also Cc-ed Arjan on this email. [done]
On 2/24/20 6:09 AM, Paul Menzel wrote:
> From: Arjan van de Ven <arjan@linux.intel.com>
> Date: Thu, 2 Jun 2016 23:36:32 -0500
>
> ATA init is the long pole in the boot process, and its asynchronous.
> Move the graphics init after it, so that ATA and graphics initialize
> in parallel.
>
> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
> ---
>
> 1. Taken from Clear Linux: https://github.com/clearlinux-pkgs/linux/commits/master/0110-Initialize-ata-before-graphics.patch
> 2. Arjan, can you please add your Signed-off-by line?
>
> drivers/Makefile | 15 ++++++++-------
> 1 file changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/Makefile b/drivers/Makefile
> index aaef17c..d08f3a3 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -58,15 +58,8 @@ obj-y += char/
> # iommu/ comes before gpu as gpu are using iommu controllers
> obj-y += iommu/
>
> -# gpu/ comes after char for AGP vs DRM startup and after iommu
> -obj-y += gpu/
> -
> obj-$(CONFIG_CONNECTOR) += connector/
>
> -# i810fb and intelfb depend on char/agp/
> -obj-$(CONFIG_FB_I810) += video/fbdev/i810/
> -obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
> -
> obj-$(CONFIG_PARPORT) += parport/
> obj-$(CONFIG_NVM) += lightnvm/
> obj-y += base/ block/ misc/ mfd/ nfc/
> @@ -79,6 +72,14 @@ obj-$(CONFIG_IDE) += ide/
> obj-y += scsi/
> obj-y += nvme/
> obj-$(CONFIG_ATA) += ata/
> +
> +# gpu/ comes after char for AGP vs DRM startup and after iommu
> +obj-y += gpu/
> +
> +# i810fb and intelfb depend on char/agp/
> +obj-$(CONFIG_FB_I810) += video/fbdev/i810/
> +obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
> +
> obj-$(CONFIG_TARGET_CORE) += target/
> obj-$(CONFIG_MTD) += mtd/
> obj-$(CONFIG_SPI) += spi/
>
--
~Randy
Reported-by: Randy Dunlap <rdunlap@infradead.org>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2020-02-26 8:09 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-24 14:09 [PATCH] Initialize ATA before graphics Paul Menzel
2020-02-24 14:09 ` Paul Menzel
2020-02-24 14:09 ` Paul Menzel
2020-02-24 14:09 ` Paul Menzel
2020-02-25 16:33 ` Randy Dunlap
2020-02-25 16:33 ` Randy Dunlap
2020-02-25 16:33 ` Randy Dunlap
2020-02-25 16:33 ` Randy Dunlap
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.