* Re: [Watchdog drivers] - WDIOC_GETSUPPORT clarification [not found] <CAKu6O181WOq36RCDO0VPcsZZoUFAJ88BMqv0Hqf+qYCeZsMJtQ@mail.gmail.com> @ 2021-08-18 12:53 ` Hans de Goede 2021-08-18 14:13 ` Guenter Roeck 1 sibling, 0 replies; 6+ messages in thread From: Hans de Goede @ 2021-08-18 12:53 UTC (permalink / raw) To: Jose Noguera, wim, linux-watchdog, linux; +Cc: Peter Robinson Hi, On 8/18/21 11:57 AM, Jose Noguera wrote: > Hello all! > > I’m Jose, working in Red Hat on Fedora IoT and RHEL For Edge related projects. > > While trying to add the feature of figuring out whether the current boot was triggered or not by a hardware watchdog using wdctl, we’ve found an odd behaviour in the drivers definition that we would like to check with you. > > Looking specifically for the flag WDIOF_CARDRESET, we can find 40 files that contain it: > > $ grep -rl CARDRESET drivers/watchdog/ | wc -l > 40 > > but only 19 of them have the flag advertised in the options field of the watchdog_info struct returned by the WDIOC_GETSUPPORT ioctl. > > This leads to wdctl not showing WDIOF_CARDRESET for drivers like i6300esb, even when the board had been reset this way: > > $ sudo wdctl > Device: /dev/watchdog0 > Identity: i6300ESB timer [version 0] > Timeout: 30 seconds > Pre-timeout: 0 seconds > > FLAG DESCRIPTION STATUS BOOT-STATUS > KEEPALIVEPING Keep alive ping reply 1 0 > MAGICCLOSE Supports magic close char 0 0 > SETTIMEOUT Set timeout (in seconds) 0 0 > > Working with Hans (in CC), we added a little patch (BugZilla ticket: 1993983) on wdctl To be clear, Jose is talking about this bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1993983 And this is the util-linux commit with the little workaround-patch: https://github.com/karelzak/util-linux/commit/b1b0259fe42aad1bf0997ce1c03a020ce59e38ab > and this would be the output of the command when it was a card reset triggered boot: > > $ sudo wdctl > Device: /dev/watchdog0 > Identity: i6300ESB timer [version 0] > Timeout: 30 seconds > Pre-timeout: 0 seconds > > FLAG DESCRIPTION STATUS BOOT-STATUS > CARDRESET Card previously reset the CPU 1 1 > KEEPALIVEPING Keep alive ping reply 1 0 > MAGICCLOSE Supports magic close char 0 0 > SETTIMEOUT Set timeout (in seconds) 0 0 > > So our question is, may we know what is intended to be present in ident.options? What should the API call WDIOC_GETSUPPORT return in the options field? Regards, Hans ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Watchdog drivers] - WDIOC_GETSUPPORT clarification [not found] <CAKu6O181WOq36RCDO0VPcsZZoUFAJ88BMqv0Hqf+qYCeZsMJtQ@mail.gmail.com> 2021-08-18 12:53 ` [Watchdog drivers] - WDIOC_GETSUPPORT clarification Hans de Goede @ 2021-08-18 14:13 ` Guenter Roeck 2021-08-18 14:49 ` Hans de Goede 1 sibling, 1 reply; 6+ messages in thread From: Guenter Roeck @ 2021-08-18 14:13 UTC (permalink / raw) To: Jose Noguera, wim, linux-watchdog; +Cc: Hans De Goede, Peter Robinson On 8/18/21 2:57 AM, Jose Noguera wrote: > Hello all! > > I’m Jose, working in Red Hat on Fedora IoT and RHEL For Edge related projects. > > While trying to add the feature of figuring out whether the current boot was triggered or not by a hardware watchdog using wdctl, we’ve found an odd behaviour in the drivers definition that we would like to check with you. > > Looking specifically for the flag WDIOF_CARDRESET, we can find 40 files that contain it: > > $ grep -rl CARDRESET drivers/watchdog/ | wc -l > 40 > > but only 19 of them have the flag advertised in the options field of the watchdog_info struct returned by the WDIOC_GETSUPPORT ioctl. > > This leads to wdctl not showing WDIOF_CARDRESET for drivers like i6300esb, even when the board had been reset this way: > > $ sudo wdctl > Device: /dev/watchdog0 > Identity: i6300ESB timer [version 0] > Timeout: 30 seconds > Pre-timeout: 0 seconds > > FLAG DESCRIPTION STATUS BOOT-STATUS > KEEPALIVEPING Keep alive ping reply 1 0 > MAGICCLOSE Supports magic close char 0 0 > SETTIMEOUT Set timeout (in seconds) 0 0 > > Working with Hans (in CC), we added a little patch (BugZilla ticket: 1993983) on wdctl and this would be the output of the command when it was a card reset triggered boot: > > $ sudo wdctl > Device: /dev/watchdog0 > Identity: i6300ESB timer [version 0] > Thank you all for your time, > > Jose > Timeout: 30 seconds > Pre-timeout: 0 seconds > > FLAG DESCRIPTION STATUS BOOT-STATUS > CARDRESET Card previously reset the CPU 1 1 > KEEPALIVEPING Keep alive ping reply 1 0 > MAGICCLOSE Supports magic close char 0 0 > SETTIMEOUT Set timeout (in seconds) 0 0 > > So our question is, may we know what is intended to be present in ident.options? What should the API call WDIOC_GETSUPPORT return in the options field? > Search for WDIOC_GETSUPPORT in Documentation/watchdog/watchdog-api.rst. I don't see any ambiguity there. Patches welcome. Guenter ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Watchdog drivers] - WDIOC_GETSUPPORT clarification 2021-08-18 14:13 ` Guenter Roeck @ 2021-08-18 14:49 ` Hans de Goede 2021-08-18 14:53 ` Guenter Roeck 0 siblings, 1 reply; 6+ messages in thread From: Hans de Goede @ 2021-08-18 14:49 UTC (permalink / raw) To: Guenter Roeck, Jose Noguera, wim, linux-watchdog; +Cc: Peter Robinson Hi, On 8/18/21 4:13 PM, Guenter Roeck wrote: > On 8/18/21 2:57 AM, Jose Noguera wrote: >> Hello all! >> >> I’m Jose, working in Red Hat on Fedora IoT and RHEL For Edge related projects. >> >> While trying to add the feature of figuring out whether the current boot was triggered or not by a hardware watchdog using wdctl, we’ve found an odd behaviour in the drivers definition that we would like to check with you. >> >> Looking specifically for the flag WDIOF_CARDRESET, we can find 40 files that contain it: >> >> $ grep -rl CARDRESET drivers/watchdog/ | wc -l >> 40 >> >> but only 19 of them have the flag advertised in the options field of the watchdog_info struct returned by the WDIOC_GETSUPPORT ioctl. >> >> This leads to wdctl not showing WDIOF_CARDRESET for drivers like i6300esb, even when the board had been reset this way: >> >> $ sudo wdctl >> Device: /dev/watchdog0 >> Identity: i6300ESB timer [version 0] >> Timeout: 30 seconds >> Pre-timeout: 0 seconds >> >> FLAG DESCRIPTION STATUS BOOT-STATUS >> KEEPALIVEPING Keep alive ping reply 1 0 >> MAGICCLOSE Supports magic close char 0 0 >> SETTIMEOUT Set timeout (in seconds) 0 0 >> >> Working with Hans (in CC), we added a little patch (BugZilla ticket: 1993983) on wdctl and this would be the output of the command when it was a card reset triggered boot: >> >> $ sudo wdctl >> Device: /dev/watchdog0 >> Identity: i6300ESB timer [version 0] >> Thank you all for your time, >> >> Jose > >> Timeout: 30 seconds >> Pre-timeout: 0 seconds >> >> FLAG DESCRIPTION STATUS BOOT-STATUS >> CARDRESET Card previously reset the CPU 1 1 >> KEEPALIVEPING Keep alive ping reply 1 0 >> MAGICCLOSE Supports magic close char 0 0 >> SETTIMEOUT Set timeout (in seconds) 0 0 >> >> So our question is, may we know what is intended to be present in ident.options? What should the API call WDIOC_GETSUPPORT return in the options field? >> > > Search for WDIOC_GETSUPPORT in Documentation/watchdog/watchdog-api.rst. > I don't see any ambiguity there. Patches welcome. Ok, so drivers which may set CARDRESET in their GETBOOTSTATUS reply, but don't advertise this in their GETSUPPORT watchdog_info.options reply are buggy and should be fixed, got it. Thanks. I've made a note about fixing this in a possible-kernel-projects document which I keep for when people who are interested in kernel development ask me for projects. Regards, Hans ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Watchdog drivers] - WDIOC_GETSUPPORT clarification 2021-08-18 14:49 ` Hans de Goede @ 2021-08-18 14:53 ` Guenter Roeck 2021-09-01 11:15 ` Peter Robinson 0 siblings, 1 reply; 6+ messages in thread From: Guenter Roeck @ 2021-08-18 14:53 UTC (permalink / raw) To: Hans de Goede, Jose Noguera, wim, linux-watchdog; +Cc: Peter Robinson On 8/18/21 7:49 AM, Hans de Goede wrote: > Hi, > > On 8/18/21 4:13 PM, Guenter Roeck wrote: >> On 8/18/21 2:57 AM, Jose Noguera wrote: >>> Hello all! >>> >>> I’m Jose, working in Red Hat on Fedora IoT and RHEL For Edge related projects. >>> >>> While trying to add the feature of figuring out whether the current boot was triggered or not by a hardware watchdog using wdctl, we’ve found an odd behaviour in the drivers definition that we would like to check with you. >>> >>> Looking specifically for the flag WDIOF_CARDRESET, we can find 40 files that contain it: >>> >>> $ grep -rl CARDRESET drivers/watchdog/ | wc -l >>> 40 >>> >>> but only 19 of them have the flag advertised in the options field of the watchdog_info struct returned by the WDIOC_GETSUPPORT ioctl. >>> >>> This leads to wdctl not showing WDIOF_CARDRESET for drivers like i6300esb, even when the board had been reset this way: >>> >>> $ sudo wdctl >>> Device: /dev/watchdog0 >>> Identity: i6300ESB timer [version 0] >>> Timeout: 30 seconds >>> Pre-timeout: 0 seconds >>> >>> FLAG DESCRIPTION STATUS BOOT-STATUS >>> KEEPALIVEPING Keep alive ping reply 1 0 >>> MAGICCLOSE Supports magic close char 0 0 >>> SETTIMEOUT Set timeout (in seconds) 0 0 >>> >>> Working with Hans (in CC), we added a little patch (BugZilla ticket: 1993983) on wdctl and this would be the output of the command when it was a card reset triggered boot: >>> >>> $ sudo wdctl >>> Device: /dev/watchdog0 >>> Identity: i6300ESB timer [version 0] >>> Thank you all for your time, >>> >>> Jose >> >>> Timeout: 30 seconds >>> Pre-timeout: 0 seconds >>> >>> FLAG DESCRIPTION STATUS BOOT-STATUS >>> CARDRESET Card previously reset the CPU 1 1 >>> KEEPALIVEPING Keep alive ping reply 1 0 >>> MAGICCLOSE Supports magic close char 0 0 >>> SETTIMEOUT Set timeout (in seconds) 0 0 >>> >>> So our question is, may we know what is intended to be present in ident.options? What should the API call WDIOC_GETSUPPORT return in the options field? >>> >> >> Search for WDIOC_GETSUPPORT in Documentation/watchdog/watchdog-api.rst. >> I don't see any ambiguity there. Patches welcome. > > Ok, so drivers which may set CARDRESET in their GETBOOTSTATUS reply, but > don't advertise this in their GETSUPPORT watchdog_info.options reply > are buggy and should be fixed, got it. Thanks. > > I've made a note about fixing this in a possible-kernel-projects document > which I keep for when people who are interested in kernel development > ask me for projects. > With an add-on: If the driver in question is an old-style driver, anyone affected by the problem should really convert the driver to support the watchdog subsystem. Thanks, Guenter > Regards, > > Hans > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Watchdog drivers] - WDIOC_GETSUPPORT clarification 2021-08-18 14:53 ` Guenter Roeck @ 2021-09-01 11:15 ` Peter Robinson 2021-09-01 19:51 ` Guenter Roeck 0 siblings, 1 reply; 6+ messages in thread From: Peter Robinson @ 2021-09-01 11:15 UTC (permalink / raw) To: Guenter Roeck, Hans de Goede, Jose Noguera, wim, linux-watchdog On Wed, 2021-08-18 at 07:53 -0700, Guenter Roeck wrote: > On 8/18/21 7:49 AM, Hans de Goede wrote: > > Hi, > > > > On 8/18/21 4:13 PM, Guenter Roeck wrote: > > > On 8/18/21 2:57 AM, Jose Noguera wrote: > > > > Hello all! > > > > > > > > I’m Jose, working in Red Hat on Fedora IoT and RHEL For Edge > > > > related projects. > > > > > > > > While trying to add the feature of figuring out whether the > > > > current boot was triggered or not by a hardware watchdog using > > > > wdctl, we’ve found an odd behaviour in the drivers definition > > > > that we would like to check with you. > > > > > > > > Looking specifically for the flag WDIOF_CARDRESET, we can find > > > > 40 files that contain it: > > > > > > > > $ grep -rl CARDRESET drivers/watchdog/ | wc -l > > > > 40 > > > > > > > > but only 19 of them have the flag advertised in the options > > > > field of the watchdog_info struct returned by the > > > > WDIOC_GETSUPPORT ioctl. > > > > > > > > This leads to wdctl not showing WDIOF_CARDRESET for drivers > > > > like i6300esb, even when the board had been reset this way: > > > > > > > > $ sudo wdctl > > > > Device: /dev/watchdog0 > > > > Identity: i6300ESB timer [version 0] > > > > Timeout: 30 seconds > > > > Pre-timeout: 0 seconds > > > > > > > > FLAG DESCRIPTION STATUS BOOT-STATUS > > > > KEEPALIVEPING Keep alive ping reply 1 0 > > > > MAGICCLOSE Supports magic close char 0 0 > > > > SETTIMEOUT Set timeout (in seconds) 0 0 > > > > > > > > Working with Hans (in CC), we added a little patch (BugZilla > > > > ticket: 1993983) on wdctl and this would be the output of the > > > > command when it was a card reset triggered boot: > > > > > > > > $ sudo wdctl > > > > Device: /dev/watchdog0 > > > > Identity: i6300ESB timer [version 0] > > > > Thank you all for your time, > > > > > > > > Jose > > > > > > > Timeout: 30 seconds > > > > Pre-timeout: 0 seconds > > > > > > > > FLAG DESCRIPTION STATUS BOOT-STATUS > > > > CARDRESET Card previously reset the CPU 1 1 > > > > KEEPALIVEPING Keep alive ping reply 1 0 > > > > MAGICCLOSE Supports magic close char 0 0 > > > > SETTIMEOUT Set timeout (in seconds) 0 0 > > > > > > > > So our question is, may we know what is intended to be present > > > > in ident.options? What should the API call WDIOC_GETSUPPORT > > > > return in the options field? > > > > > > > > > > Search for WDIOC_GETSUPPORT in Documentation/watchdog/watchdog- > > > api.rst. > > > I don't see any ambiguity there. Patches welcome. > > > > Ok, so drivers which may set CARDRESET in their GETBOOTSTATUS > > reply, but > > don't advertise this in their GETSUPPORT watchdog_info.options > > reply > > are buggy and should be fixed, got it. Thanks. > > > > I've made a note about fixing this in a possible-kernel-projects > > document > > which I keep for when people who are interested in kernel > > development > > ask me for projects. > > > > With an add-on: If the driver in question is an old-style driver, > anyone > affected by the problem should really convert the driver to support > the watchdog subsystem. Would you have a link to any docs/posts outlining what needs to be done for conversion to the watchdog subsystem? Regards, Peter ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Watchdog drivers] - WDIOC_GETSUPPORT clarification 2021-09-01 11:15 ` Peter Robinson @ 2021-09-01 19:51 ` Guenter Roeck 0 siblings, 0 replies; 6+ messages in thread From: Guenter Roeck @ 2021-09-01 19:51 UTC (permalink / raw) To: Peter Robinson; +Cc: Hans de Goede, Jose Noguera, wim, linux-watchdog On Wed, Sep 01, 2021 at 12:15:23PM +0100, Peter Robinson wrote: > On Wed, 2021-08-18 at 07:53 -0700, Guenter Roeck wrote: > > On 8/18/21 7:49 AM, Hans de Goede wrote: > > > Hi, > > > > > > On 8/18/21 4:13 PM, Guenter Roeck wrote: > > > > On 8/18/21 2:57 AM, Jose Noguera wrote: > > > > > Hello all! > > > > > > > > > > I’m Jose, working in Red Hat on Fedora IoT and RHEL For Edge > > > > > related projects. > > > > > > > > > > While trying to add the feature of figuring out whether the > > > > > current boot was triggered or not by a hardware watchdog using > > > > > wdctl, we’ve found an odd behaviour in the drivers definition > > > > > that we would like to check with you. > > > > > > > > > > Looking specifically for the flag WDIOF_CARDRESET, we can find > > > > > 40 files that contain it: > > > > > > > > > > $ grep -rl CARDRESET drivers/watchdog/ | wc -l > > > > > 40 > > > > > > > > > > but only 19 of them have the flag advertised in the options > > > > > field of the watchdog_info struct returned by the > > > > > WDIOC_GETSUPPORT ioctl. > > > > > > > > > > This leads to wdctl not showing WDIOF_CARDRESET for drivers > > > > > like i6300esb, even when the board had been reset this way: > > > > > > > > > > $ sudo wdctl > > > > > Device: /dev/watchdog0 > > > > > Identity: i6300ESB timer [version 0] > > > > > Timeout: 30 seconds > > > > > Pre-timeout: 0 seconds > > > > > > > > > > FLAG DESCRIPTION STATUS BOOT-STATUS > > > > > KEEPALIVEPING Keep alive ping reply 1 0 > > > > > MAGICCLOSE Supports magic close char 0 0 > > > > > SETTIMEOUT Set timeout (in seconds) 0 0 > > > > > > > > > > Working with Hans (in CC), we added a little patch (BugZilla > > > > > ticket: 1993983) on wdctl and this would be the output of the > > > > > command when it was a card reset triggered boot: > > > > > > > > > > $ sudo wdctl > > > > > Device: /dev/watchdog0 > > > > > Identity: i6300ESB timer [version 0] > > > > > Thank you all for your time, > > > > > > > > > > Jose > > > > > > > > > Timeout: 30 seconds > > > > > Pre-timeout: 0 seconds > > > > > > > > > > FLAG DESCRIPTION STATUS BOOT-STATUS > > > > > CARDRESET Card previously reset the CPU 1 1 > > > > > KEEPALIVEPING Keep alive ping reply 1 0 > > > > > MAGICCLOSE Supports magic close char 0 0 > > > > > SETTIMEOUT Set timeout (in seconds) 0 0 > > > > > > > > > > So our question is, may we know what is intended to be present > > > > > in ident.options? What should the API call WDIOC_GETSUPPORT > > > > > return in the options field? > > > > > > > > > > > > > Search for WDIOC_GETSUPPORT in Documentation/watchdog/watchdog- > > > > api.rst. > > > > I don't see any ambiguity there. Patches welcome. > > > > > > Ok, so drivers which may set CARDRESET in their GETBOOTSTATUS > > > reply, but > > > don't advertise this in their GETSUPPORT watchdog_info.options > > > reply > > > are buggy and should be fixed, got it. Thanks. > > > > > > I've made a note about fixing this in a possible-kernel-projects > > > document > > > which I keep for when people who are interested in kernel > > > development > > > ask me for projects. > > > > > > > With an add-on: If the driver in question is an old-style driver, > > anyone > > affected by the problem should really convert the driver to support > > the watchdog subsystem. > > Would you have a link to any docs/posts outlining what needs to be done > for conversion to the watchdog subsystem? Documentation/watchdog/convert_drivers_to_kernel_api.rst should help. Guenter ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-09-01 19:51 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CAKu6O181WOq36RCDO0VPcsZZoUFAJ88BMqv0Hqf+qYCeZsMJtQ@mail.gmail.com>
2021-08-18 12:53 ` [Watchdog drivers] - WDIOC_GETSUPPORT clarification Hans de Goede
2021-08-18 14:13 ` Guenter Roeck
2021-08-18 14:49 ` Hans de Goede
2021-08-18 14:53 ` Guenter Roeck
2021-09-01 11:15 ` Peter Robinson
2021-09-01 19:51 ` Guenter Roeck
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.