[BACKPORT 4.14.y 0/8] Candidates from Spreadtrum 4.14 product kernel

[BACKPORT 4.14.y 0/8] Candidates from Spreadtrum 4.14 product kernel

[Baolin Wang]

With Arnd's script [1] help, I found some bugfixes in Spreadtrum 4.14 product
kernel, but missing in v4.14.141:

86fda90ab588 net: sctp: fix warning "NULL check before some freeing functions is not needed"
25a09ce79639 ppp: mppe: Revert "ppp: mppe: Add softdep to arc4"
d9b308b1f8a1 drm/i915/fbdev: Actually configure untiled displays
47d3d7fdb10a ip6: fix skb leak in ip6frag_expire_frag_queue()
5b9cea15a3de serial: sprd: Modify the baud rate calculation formula
513e1073d52e locking/lockdep: Add debug_locks check in __lock_downgrade()
957063c92473 pinctrl: sprd: Use define directive for sprd_pinconf_params values
87a2b65fc855 power: supply: sysfs: ratelimit property read error message

[1] https://lore.kernel.org/lkml/20190322154425.3852517-19-arnd@arndb.de/T/

Chris Wilson (1):
  drm/i915/fbdev: Actually configure untiled displays

David Lechner (1):
  power: supply: sysfs: ratelimit property read error message

Eric Biggers (1):
  ppp: mppe: Revert "ppp: mppe: Add softdep to arc4"

Eric Dumazet (1):
  ip6: fix skb leak in ip6frag_expire_frag_queue()

Hariprasad Kelam (1):
  net: sctp: fix warning "NULL check before some freeing functions is
    not needed"

Lanqing Liu (1):
  serial: sprd: Modify the baud rate calculation formula

Nathan Chancellor (1):
  pinctrl: sprd: Use define directive for sprd_pinconf_params values

Waiman Long (1):
  locking/lockdep: Add debug_locks check in __lock_downgrade()

 drivers/gpu/drm/i915/intel_fbdev.c        |   12 +++++++-----
 drivers/net/ppp/ppp_mppe.c                |    1 -
 drivers/pinctrl/sprd/pinctrl-sprd.c       |    6 ++----
 drivers/power/supply/power_supply_sysfs.c |    3 ++-
 drivers/tty/serial/sprd_serial.c          |    2 +-
 include/net/ipv6_frag.h                   |    1 -
 kernel/locking/lockdep.c                  |    3 +++
 net/sctp/sm_make_chunk.c                  |   12 ++++--------
 8 files changed, 19 insertions(+), 21 deletions(-)

-- 
1.7.9.5

[BACKPORT 4.14.y 0/8] Candidates from Spreadtrum 4.14 product kernel

[Baolin Wang]

With Arnd's script [1] help, I found some bugfixes in Spreadtrum 4.14 product
kernel, but missing in v4.14.141:

86fda90ab588 net: sctp: fix warning "NULL check before some freeing functions is not needed"
25a09ce79639 ppp: mppe: Revert "ppp: mppe: Add softdep to arc4"
d9b308b1f8a1 drm/i915/fbdev: Actually configure untiled displays
47d3d7fdb10a ip6: fix skb leak in ip6frag_expire_frag_queue()
5b9cea15a3de serial: sprd: Modify the baud rate calculation formula
513e1073d52e locking/lockdep: Add debug_locks check in __lock_downgrade()
957063c92473 pinctrl: sprd: Use define directive for sprd_pinconf_params values
87a2b65fc855 power: supply: sysfs: ratelimit property read error message

[1] https://lore.kernel.org/lkml/20190322154425.3852517-19-arnd@arndb.de/T/

Chris Wilson (1):
  drm/i915/fbdev: Actually configure untiled displays

David Lechner (1):
  power: supply: sysfs: ratelimit property read error message

Eric Biggers (1):
  ppp: mppe: Revert "ppp: mppe: Add softdep to arc4"

Eric Dumazet (1):
  ip6: fix skb leak in ip6frag_expire_frag_queue()

Hariprasad Kelam (1):
  net: sctp: fix warning "NULL check before some freeing functions is
    not needed"

Lanqing Liu (1):
  serial: sprd: Modify the baud rate calculation formula

Nathan Chancellor (1):
  pinctrl: sprd: Use define directive for sprd_pinconf_params values

Waiman Long (1):
  locking/lockdep: Add debug_locks check in __lock_downgrade()

 drivers/gpu/drm/i915/intel_fbdev.c        |   12 +++++++-----
 drivers/net/ppp/ppp_mppe.c                |    1 -
 drivers/pinctrl/sprd/pinctrl-sprd.c       |    6 ++----
 drivers/power/supply/power_supply_sysfs.c |    3 ++-
 drivers/tty/serial/sprd_serial.c          |    2 +-
 include/net/ipv6_frag.h                   |    1 -
 kernel/locking/lockdep.c                  |    3 +++
 net/sctp/sm_make_chunk.c                  |   12 ++++--------
 8 files changed, 19 insertions(+), 21 deletions(-)

-- 
1.7.9.5

[BACKPORT 4.14.y 1/8] drm/i915/fbdev: Actually configure untiled displays

[Baolin Wang]

From: Chris Wilson <chris@chris-wilson.co.uk>

If we skipped all the connectors that were not part of a tile, we would
leave conn_seq=0 and conn_configured=0, convincing ourselves that we
had stagnated in our configuration attempts. Avoid this situation by
starting conn_seq=ALL_CONNECTORS, and repeating until we find no more
connectors to configure.

Fixes: 754a76591b12 ("drm/i915/fbdev: Stop repeating tile configuration on stagnation")
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190215123019.32283-1-chris@chris-wilson.co.uk
Cc: <stable@vger.kernel.org> # v3.19+
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 drivers/gpu/drm/i915/intel_fbdev.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
index da2d309..14eb8a0 100644
--- a/drivers/gpu/drm/i915/intel_fbdev.c
+++ b/drivers/gpu/drm/i915/intel_fbdev.c
@@ -326,8 +326,8 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
 				    bool *enabled, int width, int height)
 {
 	struct drm_i915_private *dev_priv = to_i915(fb_helper->dev);
-	unsigned long conn_configured, conn_seq, mask;
 	unsigned int count = min(fb_helper->connector_count, BITS_PER_LONG);
+	unsigned long conn_configured, conn_seq;
 	int i, j;
 	bool *save_enabled;
 	bool fallback = true, ret = true;
@@ -345,10 +345,9 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
 		drm_modeset_backoff(&ctx);
 
 	memcpy(save_enabled, enabled, count);
-	mask = GENMASK(count - 1, 0);
+	conn_seq = GENMASK(count - 1, 0);
 	conn_configured = 0;
 retry:
-	conn_seq = conn_configured;
 	for (i = 0; i < count; i++) {
 		struct drm_fb_helper_connector *fb_conn;
 		struct drm_connector *connector;
@@ -361,7 +360,8 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
 		if (conn_configured & BIT(i))
 			continue;
 
-		if (conn_seq == 0 && !connector->has_tile)
+		/* First pass, only consider tiled connectors */
+		if (conn_seq == GENMASK(count - 1, 0) && !connector->has_tile)
 			continue;
 
 		if (connector->status == connector_status_connected)
@@ -465,8 +465,10 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
 		conn_configured |= BIT(i);
 	}
 
-	if ((conn_configured & mask) != mask && conn_configured != conn_seq)
+	if (conn_configured != conn_seq) { /* repeat until no more are found */
+		conn_seq = conn_configured;
 		goto retry;
+	}
 
 	/*
 	 * If the BIOS didn't enable everything it could, fall back to have the
-- 
1.7.9.5

Re: [BACKPORT 4.14.y 1/8] drm/i915/fbdev: Actually configure untiled displays

[Jani Nikula]

On Tue, 03 Sep 2019, Baolin Wang <baolin.wang@linaro.org> wrote:
> From: Chris Wilson <chris@chris-wilson.co.uk>
>
> If we skipped all the connectors that were not part of a tile, we would
> leave conn_seq=0 and conn_configured=0, convincing ourselves that we
> had stagnated in our configuration attempts. Avoid this situation by
> starting conn_seq=ALL_CONNECTORS, and repeating until we find no more
> connectors to configure.
>
> Fixes: 754a76591b12 ("drm/i915/fbdev: Stop repeating tile configuration on stagnation")
> Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Link: https://patchwork.freedesktop.org/patch/msgid/20190215123019.32283-1-chris@chris-wilson.co.uk
> Cc: <stable@vger.kernel.org> # v3.19+
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>

Please look into the scripts to avoid picking up stuff that has
subsequently been reverted:

commit 9fa246256e09dc30820524401cdbeeaadee94025
Author: Dave Airlie <airlied@redhat.com>
Date:   Wed Apr 24 10:47:56 2019 +1000

    Revert "drm/i915/fbdev: Actually configure untiled displays"
    
    This reverts commit d179b88deb3bf6fed4991a31fd6f0f2cad21fab5.
    
    This commit is documented to break userspace X.org modesetting driver in certain configurations.
    
    The X.org modesetting userspace driver is broken. No fixes are available yet. In order for this patch to be applied it either needs a config option or a workaround developed.
    
    This has been reported a few times, saying it's a userspace problem is clearly against the regression rules.
    
    Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109806
    Signed-off-by: Dave Airlie <airlied@redhat.com>
    Cc: <stable@vger.kernel.org> # v3.19+



BR,
Jani.


> ---
>  drivers/gpu/drm/i915/intel_fbdev.c |   12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
> index da2d309..14eb8a0 100644
> --- a/drivers/gpu/drm/i915/intel_fbdev.c
> +++ b/drivers/gpu/drm/i915/intel_fbdev.c
> @@ -326,8 +326,8 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
>  				    bool *enabled, int width, int height)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(fb_helper->dev);
> -	unsigned long conn_configured, conn_seq, mask;
>  	unsigned int count = min(fb_helper->connector_count, BITS_PER_LONG);
> +	unsigned long conn_configured, conn_seq;
>  	int i, j;
>  	bool *save_enabled;
>  	bool fallback = true, ret = true;
> @@ -345,10 +345,9 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
>  		drm_modeset_backoff(&ctx);
>  
>  	memcpy(save_enabled, enabled, count);
> -	mask = GENMASK(count - 1, 0);
> +	conn_seq = GENMASK(count - 1, 0);
>  	conn_configured = 0;
>  retry:
> -	conn_seq = conn_configured;
>  	for (i = 0; i < count; i++) {
>  		struct drm_fb_helper_connector *fb_conn;
>  		struct drm_connector *connector;
> @@ -361,7 +360,8 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
>  		if (conn_configured & BIT(i))
>  			continue;
>  
> -		if (conn_seq == 0 && !connector->has_tile)
> +		/* First pass, only consider tiled connectors */
> +		if (conn_seq == GENMASK(count - 1, 0) && !connector->has_tile)
>  			continue;
>  
>  		if (connector->status == connector_status_connected)
> @@ -465,8 +465,10 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
>  		conn_configured |= BIT(i);
>  	}
>  
> -	if ((conn_configured & mask) != mask && conn_configured != conn_seq)
> +	if (conn_configured != conn_seq) { /* repeat until no more are found */
> +		conn_seq = conn_configured;
>  		goto retry;
> +	}
>  
>  	/*
>  	 * If the BIOS didn't enable everything it could, fall back to have the

-- 
Jani Nikula, Intel Open Source Graphics Center

Re: [BACKPORT 4.14.y 1/8] drm/i915/fbdev: Actually configure untiled displays

[Jani Nikula]

On Tue, 03 Sep 2019, Baolin Wang <baolin.wang@linaro.org> wrote:
> From: Chris Wilson <chris@chris-wilson.co.uk>
>
> If we skipped all the connectors that were not part of a tile, we would
> leave conn_seq=0 and conn_configured=0, convincing ourselves that we
> had stagnated in our configuration attempts. Avoid this situation by
> starting conn_seq=ALL_CONNECTORS, and repeating until we find no more
> connectors to configure.
>
> Fixes: 754a76591b12 ("drm/i915/fbdev: Stop repeating tile configuration on stagnation")
> Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Link: https://patchwork.freedesktop.org/patch/msgid/20190215123019.32283-1-chris@chris-wilson.co.uk
> Cc: <stable@vger.kernel.org> # v3.19+
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>

Please look into the scripts to avoid picking up stuff that has
subsequently been reverted:

commit 9fa246256e09dc30820524401cdbeeaadee94025
Author: Dave Airlie <airlied@redhat.com>
Date:   Wed Apr 24 10:47:56 2019 +1000

    Revert "drm/i915/fbdev: Actually configure untiled displays"
    
    This reverts commit d179b88deb3bf6fed4991a31fd6f0f2cad21fab5.
    
    This commit is documented to break userspace X.org modesetting driver in certain configurations.
    
    The X.org modesetting userspace driver is broken. No fixes are available yet. In order for this patch to be applied it either needs a config option or a workaround developed.
    
    This has been reported a few times, saying it's a userspace problem is clearly against the regression rules.
    
    Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109806
    Signed-off-by: Dave Airlie <airlied@redhat.com>
    Cc: <stable@vger.kernel.org> # v3.19+



BR,
Jani.


> ---
>  drivers/gpu/drm/i915/intel_fbdev.c |   12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
> index da2d309..14eb8a0 100644
> --- a/drivers/gpu/drm/i915/intel_fbdev.c
> +++ b/drivers/gpu/drm/i915/intel_fbdev.c
> @@ -326,8 +326,8 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
>  				    bool *enabled, int width, int height)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(fb_helper->dev);
> -	unsigned long conn_configured, conn_seq, mask;
>  	unsigned int count = min(fb_helper->connector_count, BITS_PER_LONG);
> +	unsigned long conn_configured, conn_seq;
>  	int i, j;
>  	bool *save_enabled;
>  	bool fallback = true, ret = true;
> @@ -345,10 +345,9 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
>  		drm_modeset_backoff(&ctx);
>  
>  	memcpy(save_enabled, enabled, count);
> -	mask = GENMASK(count - 1, 0);
> +	conn_seq = GENMASK(count - 1, 0);
>  	conn_configured = 0;
>  retry:
> -	conn_seq = conn_configured;
>  	for (i = 0; i < count; i++) {
>  		struct drm_fb_helper_connector *fb_conn;
>  		struct drm_connector *connector;
> @@ -361,7 +360,8 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
>  		if (conn_configured & BIT(i))
>  			continue;
>  
> -		if (conn_seq == 0 && !connector->has_tile)
> +		/* First pass, only consider tiled connectors */
> +		if (conn_seq == GENMASK(count - 1, 0) && !connector->has_tile)
>  			continue;
>  
>  		if (connector->status == connector_status_connected)
> @@ -465,8 +465,10 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
>  		conn_configured |= BIT(i);
>  	}
>  
> -	if ((conn_configured & mask) != mask && conn_configured != conn_seq)
> +	if (conn_configured != conn_seq) { /* repeat until no more are found */
> +		conn_seq = conn_configured;
>  		goto retry;
> +	}
>  
>  	/*
>  	 * If the BIOS didn't enable everything it could, fall back to have the

-- 
Jani Nikula, Intel Open Source Graphics Center

Re: [BACKPORT 4.14.y 1/8] drm/i915/fbdev: Actually configure untiled displays

[Baolin Wang]

On Wed, 4 Sep 2019 at 21:19, Jani Nikula <jani.nikula@linux.intel.com> wrote:
>
> On Tue, 03 Sep 2019, Baolin Wang <baolin.wang@linaro.org> wrote:
> > From: Chris Wilson <chris@chris-wilson.co.uk>
> >
> > If we skipped all the connectors that were not part of a tile, we would
> > leave conn_seq=0 and conn_configured=0, convincing ourselves that we
> > had stagnated in our configuration attempts. Avoid this situation by
> > starting conn_seq=ALL_CONNECTORS, and repeating until we find no more
> > connectors to configure.
> >
> > Fixes: 754a76591b12 ("drm/i915/fbdev: Stop repeating tile configuration on stagnation")
> > Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> > Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> > Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> > Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> > Link: https://patchwork.freedesktop.org/patch/msgid/20190215123019.32283-1-chris@chris-wilson.co.uk
> > Cc: <stable@vger.kernel.org> # v3.19+
> > Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
>
> Please look into the scripts to avoid picking up stuff that has
> subsequently been reverted:

I am very sorry, I missed this patch had been reverted, I will check
why this revert patch was not in our product kernel. Thanks for your
comments.

>
> commit 9fa246256e09dc30820524401cdbeeaadee94025
> Author: Dave Airlie <airlied@redhat.com>
> Date:   Wed Apr 24 10:47:56 2019 +1000
>
>     Revert "drm/i915/fbdev: Actually configure untiled displays"
>
>     This reverts commit d179b88deb3bf6fed4991a31fd6f0f2cad21fab5.
>
>     This commit is documented to break userspace X.org modesetting driver in certain configurations.
>
>     The X.org modesetting userspace driver is broken. No fixes are available yet. In order for this patch to be applied it either needs a config option or a workaround developed.
>
>     This has been reported a few times, saying it's a userspace problem is clearly against the regression rules.
>
>     Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109806
>     Signed-off-by: Dave Airlie <airlied@redhat.com>
>     Cc: <stable@vger.kernel.org> # v3.19+
>
>
>
> BR,
> Jani.
>
>
> > ---
> >  drivers/gpu/drm/i915/intel_fbdev.c |   12 +++++++-----
> >  1 file changed, 7 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
> > index da2d309..14eb8a0 100644
> > --- a/drivers/gpu/drm/i915/intel_fbdev.c
> > +++ b/drivers/gpu/drm/i915/intel_fbdev.c
> > @@ -326,8 +326,8 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
> >                                   bool *enabled, int width, int height)
> >  {
> >       struct drm_i915_private *dev_priv = to_i915(fb_helper->dev);
> > -     unsigned long conn_configured, conn_seq, mask;
> >       unsigned int count = min(fb_helper->connector_count, BITS_PER_LONG);
> > +     unsigned long conn_configured, conn_seq;
> >       int i, j;
> >       bool *save_enabled;
> >       bool fallback = true, ret = true;
> > @@ -345,10 +345,9 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
> >               drm_modeset_backoff(&ctx);
> >
> >       memcpy(save_enabled, enabled, count);
> > -     mask = GENMASK(count - 1, 0);
> > +     conn_seq = GENMASK(count - 1, 0);
> >       conn_configured = 0;
> >  retry:
> > -     conn_seq = conn_configured;
> >       for (i = 0; i < count; i++) {
> >               struct drm_fb_helper_connector *fb_conn;
> >               struct drm_connector *connector;
> > @@ -361,7 +360,8 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
> >               if (conn_configured & BIT(i))
> >                       continue;
> >
> > -             if (conn_seq == 0 && !connector->has_tile)
> > +             /* First pass, only consider tiled connectors */
> > +             if (conn_seq == GENMASK(count - 1, 0) && !connector->has_tile)
> >                       continue;
> >
> >               if (connector->status == connector_status_connected)
> > @@ -465,8 +465,10 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
> >               conn_configured |= BIT(i);
> >       }
> >
> > -     if ((conn_configured & mask) != mask && conn_configured != conn_seq)
> > +     if (conn_configured != conn_seq) { /* repeat until no more are found */
> > +             conn_seq = conn_configured;
> >               goto retry;
> > +     }
> >
> >       /*
> >        * If the BIOS didn't enable everything it could, fall back to have the
>
> --
> Jani Nikula, Intel Open Source Graphics Center



-- 
Baolin Wang
Best Regards

Re: [BACKPORT 4.14.y 1/8] drm/i915/fbdev: Actually configure untiled displays

[Greg KH]

On Tue, Sep 03, 2019 at 02:55:26PM +0800, Baolin Wang wrote:
> From: Chris Wilson <chris@chris-wilson.co.uk>
> 
> If we skipped all the connectors that were not part of a tile, we would
> leave conn_seq=0 and conn_configured=0, convincing ourselves that we
> had stagnated in our configuration attempts. Avoid this situation by
> starting conn_seq=ALL_CONNECTORS, and repeating until we find no more
> connectors to configure.
> 
> Fixes: 754a76591b12 ("drm/i915/fbdev: Stop repeating tile configuration on stagnation")
> Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Link: https://patchwork.freedesktop.org/patch/msgid/20190215123019.32283-1-chris@chris-wilson.co.uk
> Cc: <stable@vger.kernel.org> # v3.19+
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> ---
>  drivers/gpu/drm/i915/intel_fbdev.c |   12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)

What is the git commit id of this patch in Linus's tree?

Can you please add that as the first line of the changelog like is done
with all other stable patches?  That way I can verify that what you
posted here is the correct one.

Please fix the up for all of these and resend.

thanks,

greg k-h

Re: [BACKPORT 4.14.y 1/8] drm/i915/fbdev: Actually configure untiled displays

[Baolin Wang]

On Thu, 5 Sep 2019 at 01:25, Greg KH <greg@kroah.com> wrote:
>
> On Tue, Sep 03, 2019 at 02:55:26PM +0800, Baolin Wang wrote:
> > From: Chris Wilson <chris@chris-wilson.co.uk>
> >
> > If we skipped all the connectors that were not part of a tile, we would
> > leave conn_seq=0 and conn_configured=0, convincing ourselves that we
> > had stagnated in our configuration attempts. Avoid this situation by
> > starting conn_seq=ALL_CONNECTORS, and repeating until we find no more
> > connectors to configure.
> >
> > Fixes: 754a76591b12 ("drm/i915/fbdev: Stop repeating tile configuration on stagnation")
> > Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> > Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> > Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> > Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> > Link: https://patchwork.freedesktop.org/patch/msgid/20190215123019.32283-1-chris@chris-wilson.co.uk
> > Cc: <stable@vger.kernel.org> # v3.19+
> > Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> > ---
> >  drivers/gpu/drm/i915/intel_fbdev.c |   12 +++++++-----
> >  1 file changed, 7 insertions(+), 5 deletions(-)
>
> What is the git commit id of this patch in Linus's tree?

The commit id is: d9b308b1f8a1acc0c3279f443d4fe0f9f663252e

>
> Can you please add that as the first line of the changelog like is done
> with all other stable patches?  That way I can verify that what you
> posted here is the correct one.
>
> Please fix the up for all of these and resend.

Sure. Thanks.

-- 
Baolin Wang
Best Regards

[BACKPORT 4.14.y 2/8] ip6: fix skb leak in ip6frag_expire_frag_queue()

[Baolin Wang]

From: Eric Dumazet <edumazet@google.com>

Since ip6frag_expire_frag_queue() now pulls the head skb
from frag queue, we should no longer use skb_get(), since
this leads to an skb leak.

Stefan Bader initially reported a problem in 4.4.stable [1] caused
by the skb_get(), so this patch should also fix this issue.

296583.091021] kernel BUG at /build/linux-6VmqmP/linux-4.4.0/net/core/skbuff.c:1207!
[296583.091734] Call Trace:
[296583.091749]  [<ffffffff81740e50>] __pskb_pull_tail+0x50/0x350
[296583.091764]  [<ffffffff8183939a>] _decode_session6+0x26a/0x400
[296583.091779]  [<ffffffff817ec719>] __xfrm_decode_session+0x39/0x50
[296583.091795]  [<ffffffff818239d0>] icmpv6_route_lookup+0xf0/0x1c0
[296583.091809]  [<ffffffff81824421>] icmp6_send+0x5e1/0x940
[296583.091823]  [<ffffffff81753238>] ? __netif_receive_skb+0x18/0x60
[296583.091838]  [<ffffffff817532b2>] ? netif_receive_skb_internal+0x32/0xa0
[296583.091858]  [<ffffffffc0199f74>] ? ixgbe_clean_rx_irq+0x594/0xac0 [ixgbe]
[296583.091876]  [<ffffffffc04eb260>] ? nf_ct_net_exit+0x50/0x50 [nf_defrag_ipv6]
[296583.091893]  [<ffffffff8183d431>] icmpv6_send+0x21/0x30
[296583.091906]  [<ffffffff8182b500>] ip6_expire_frag_queue+0xe0/0x120
[296583.091921]  [<ffffffffc04eb27f>] nf_ct_frag6_expire+0x1f/0x30 [nf_defrag_ipv6]
[296583.091938]  [<ffffffff810f3b57>] call_timer_fn+0x37/0x140
[296583.091951]  [<ffffffffc04eb260>] ? nf_ct_net_exit+0x50/0x50 [nf_defrag_ipv6]
[296583.091968]  [<ffffffff810f5464>] run_timer_softirq+0x234/0x330
[296583.091982]  [<ffffffff8108a339>] __do_softirq+0x109/0x2b0

Fixes: d4289fcc9b16 ("net: IP6 defrag: use rbtrees for IPv6 defrag")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Stefan Bader <stefan.bader@canonical.com>
Cc: Peter Oskolkov <posk@google.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 include/net/ipv6_frag.h |    1 -
 1 file changed, 1 deletion(-)

diff --git a/include/net/ipv6_frag.h b/include/net/ipv6_frag.h
index 28aa9b3..1f77fb4 100644
--- a/include/net/ipv6_frag.h
+++ b/include/net/ipv6_frag.h
@@ -94,7 +94,6 @@ static inline u32 ip6frag_obj_hashfn(const void *data, u32 len, u32 seed)
 		goto out;
 
 	head->dev = dev;
-	skb_get(head);
 	spin_unlock(&fq->q.lock);
 
 	icmpv6_send(head, ICMPV6_TIME_EXCEED, ICMPV6_EXC_FRAGTIME, 0);
-- 
1.7.9.5

[BACKPORT 4.14.y 3/8] locking/lockdep: Add debug_locks check in __lock_downgrade()

[Baolin Wang]

From: Waiman Long <longman@redhat.com>

Tetsuo Handa had reported he saw an incorrect "downgrading a read lock"
warning right after a previous lockdep warning. It is likely that the
previous warning turned off lock debugging causing the lockdep to have
inconsistency states leading to the lock downgrade warning.

Fix that by add a check for debug_locks at the beginning of
__lock_downgrade().

Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Reported-by: syzbot+53383ae265fb161ef488@syzkaller.appspotmail.com
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/r/1547093005-26085-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 kernel/locking/lockdep.c |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 565005a..5c370c6 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -3650,6 +3650,9 @@ static int reacquire_held_locks(struct task_struct *curr, unsigned int depth,
 	unsigned int depth;
 	int i;
 
+	if (unlikely(!debug_locks))
+		return 0;
+
 	depth = curr->lockdep_depth;
 	/*
 	 * This function is about (re)setting the class of a held lock,
-- 
1.7.9.5

[BACKPORT 4.14.y 4/8] net: sctp: fix warning "NULL check before some freeing functions is not needed"

[Baolin Wang]

From: Hariprasad Kelam <hariprasad.kelam@gmail.com>

This patch removes NULL checks before calling kfree.

fixes below issues reported by coccicheck
net/sctp/sm_make_chunk.c:2586:3-8: WARNING: NULL check before some
freeing functions is not needed.
net/sctp/sm_make_chunk.c:2652:3-8: WARNING: NULL check before some
freeing functions is not needed.
net/sctp/sm_make_chunk.c:2667:3-8: WARNING: NULL check before some
freeing functions is not needed.
net/sctp/sm_make_chunk.c:2684:3-8: WARNING: NULL check before some
freeing functions is not needed.

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 net/sctp/sm_make_chunk.c |   12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index f67df16..6dac492 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -2586,8 +2586,7 @@ static int sctp_process_param(struct sctp_association *asoc,
 	case SCTP_PARAM_STATE_COOKIE:
 		asoc->peer.cookie_len =
 			ntohs(param.p->length) - sizeof(struct sctp_paramhdr);
-		if (asoc->peer.cookie)
-			kfree(asoc->peer.cookie);
+		kfree(asoc->peer.cookie);
 		asoc->peer.cookie = kmemdup(param.cookie->body, asoc->peer.cookie_len, gfp);
 		if (!asoc->peer.cookie)
 			retval = 0;
@@ -2652,8 +2651,7 @@ static int sctp_process_param(struct sctp_association *asoc,
 			goto fall_through;
 
 		/* Save peer's random parameter */
-		if (asoc->peer.peer_random)
-			kfree(asoc->peer.peer_random);
+		kfree(asoc->peer.peer_random);
 		asoc->peer.peer_random = kmemdup(param.p,
 					    ntohs(param.p->length), gfp);
 		if (!asoc->peer.peer_random) {
@@ -2667,8 +2665,7 @@ static int sctp_process_param(struct sctp_association *asoc,
 			goto fall_through;
 
 		/* Save peer's HMAC list */
-		if (asoc->peer.peer_hmacs)
-			kfree(asoc->peer.peer_hmacs);
+		kfree(asoc->peer.peer_hmacs);
 		asoc->peer.peer_hmacs = kmemdup(param.p,
 					    ntohs(param.p->length), gfp);
 		if (!asoc->peer.peer_hmacs) {
@@ -2684,8 +2681,7 @@ static int sctp_process_param(struct sctp_association *asoc,
 		if (!ep->auth_enable)
 			goto fall_through;
 
-		if (asoc->peer.peer_chunks)
-			kfree(asoc->peer.peer_chunks);
+		kfree(asoc->peer.peer_chunks);
 		asoc->peer.peer_chunks = kmemdup(param.p,
 					    ntohs(param.p->length), gfp);
 		if (!asoc->peer.peer_chunks)
-- 
1.7.9.5

[BACKPORT 4.14.y 4/8] net: sctp: fix warning "NULL check before some freeing functions is not needed

[Baolin Wang]

From: Hariprasad Kelam <hariprasad.kelam@gmail.com>

This patch removes NULL checks before calling kfree.

fixes below issues reported by coccicheck
net/sctp/sm_make_chunk.c:2586:3-8: WARNING: NULL check before some
freeing functions is not needed.
net/sctp/sm_make_chunk.c:2652:3-8: WARNING: NULL check before some
freeing functions is not needed.
net/sctp/sm_make_chunk.c:2667:3-8: WARNING: NULL check before some
freeing functions is not needed.
net/sctp/sm_make_chunk.c:2684:3-8: WARNING: NULL check before some
freeing functions is not needed.

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 net/sctp/sm_make_chunk.c |   12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index f67df16..6dac492 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -2586,8 +2586,7 @@ static int sctp_process_param(struct sctp_association *asoc,
 	case SCTP_PARAM_STATE_COOKIE:
 		asoc->peer.cookie_len  			ntohs(param.p->length) - sizeof(struct sctp_paramhdr);
-		if (asoc->peer.cookie)
-			kfree(asoc->peer.cookie);
+		kfree(asoc->peer.cookie);
 		asoc->peer.cookie = kmemdup(param.cookie->body, asoc->peer.cookie_len, gfp);
 		if (!asoc->peer.cookie)
 			retval = 0;
@@ -2652,8 +2651,7 @@ static int sctp_process_param(struct sctp_association *asoc,
 			goto fall_through;
 
 		/* Save peer's random parameter */
-		if (asoc->peer.peer_random)
-			kfree(asoc->peer.peer_random);
+		kfree(asoc->peer.peer_random);
 		asoc->peer.peer_random = kmemdup(param.p,
 					    ntohs(param.p->length), gfp);
 		if (!asoc->peer.peer_random) {
@@ -2667,8 +2665,7 @@ static int sctp_process_param(struct sctp_association *asoc,
 			goto fall_through;
 
 		/* Save peer's HMAC list */
-		if (asoc->peer.peer_hmacs)
-			kfree(asoc->peer.peer_hmacs);
+		kfree(asoc->peer.peer_hmacs);
 		asoc->peer.peer_hmacs = kmemdup(param.p,
 					    ntohs(param.p->length), gfp);
 		if (!asoc->peer.peer_hmacs) {
@@ -2684,8 +2681,7 @@ static int sctp_process_param(struct sctp_association *asoc,
 		if (!ep->auth_enable)
 			goto fall_through;
 
-		if (asoc->peer.peer_chunks)
-			kfree(asoc->peer.peer_chunks);
+		kfree(asoc->peer.peer_chunks);
 		asoc->peer.peer_chunks = kmemdup(param.p,
 					    ntohs(param.p->length), gfp);
 		if (!asoc->peer.peer_chunks)
-- 
1.7.9.5

Re: [BACKPORT 4.14.y 4/8] net: sctp: fix warning "NULL check before some freeing functions is not needed"

[Marcelo Ricardo Leitner]

On Tue, Sep 03, 2019 at 02:58:16PM +0800, Baolin Wang wrote:
> From: Hariprasad Kelam <hariprasad.kelam@gmail.com>
> 
> This patch removes NULL checks before calling kfree.
> 
> fixes below issues reported by coccicheck
> net/sctp/sm_make_chunk.c:2586:3-8: WARNING: NULL check before some
> freeing functions is not needed.
> net/sctp/sm_make_chunk.c:2652:3-8: WARNING: NULL check before some
> freeing functions is not needed.
> net/sctp/sm_make_chunk.c:2667:3-8: WARNING: NULL check before some
> freeing functions is not needed.
> net/sctp/sm_make_chunk.c:2684:3-8: WARNING: NULL check before some
> freeing functions is not needed.

Hi. This doesn't seem the kind of patch that should be backported to
such old/stable releases. After all, it's just a cleanup.

  Marcelo

Re: [BACKPORT 4.14.y 4/8] net: sctp: fix warning "NULL check before some freeing functions is not ne

[Marcelo Ricardo Leitner]

On Tue, Sep 03, 2019 at 02:58:16PM +0800, Baolin Wang wrote:
> From: Hariprasad Kelam <hariprasad.kelam@gmail.com>
> 
> This patch removes NULL checks before calling kfree.
> 
> fixes below issues reported by coccicheck
> net/sctp/sm_make_chunk.c:2586:3-8: WARNING: NULL check before some
> freeing functions is not needed.
> net/sctp/sm_make_chunk.c:2652:3-8: WARNING: NULL check before some
> freeing functions is not needed.
> net/sctp/sm_make_chunk.c:2667:3-8: WARNING: NULL check before some
> freeing functions is not needed.
> net/sctp/sm_make_chunk.c:2684:3-8: WARNING: NULL check before some
> freeing functions is not needed.

Hi. This doesn't seem the kind of patch that should be backported to
such old/stable releases. After all, it's just a cleanup.

  Marcelo

Re: [BACKPORT 4.14.y 4/8] net: sctp: fix warning "NULL check before some freeing functions is not needed"

[Greg KH]

On Tue, Sep 03, 2019 at 11:52:06AM -0300, Marcelo Ricardo Leitner wrote:
> On Tue, Sep 03, 2019 at 02:58:16PM +0800, Baolin Wang wrote:
> > From: Hariprasad Kelam <hariprasad.kelam@gmail.com>
> > 
> > This patch removes NULL checks before calling kfree.
> > 
> > fixes below issues reported by coccicheck
> > net/sctp/sm_make_chunk.c:2586:3-8: WARNING: NULL check before some
> > freeing functions is not needed.
> > net/sctp/sm_make_chunk.c:2652:3-8: WARNING: NULL check before some
> > freeing functions is not needed.
> > net/sctp/sm_make_chunk.c:2667:3-8: WARNING: NULL check before some
> > freeing functions is not needed.
> > net/sctp/sm_make_chunk.c:2684:3-8: WARNING: NULL check before some
> > freeing functions is not needed.
> 
> Hi. This doesn't seem the kind of patch that should be backported to
> such old/stable releases. After all, it's just a cleanup.

I agree, this does not seem necessary _unless_ it is needed for a later
real fix.

thanks,

greg k-h

Re: [BACKPORT 4.14.y 4/8] net: sctp: fix warning "NULL check before some freeing functions is not ne

[Greg KH]

On Tue, Sep 03, 2019 at 11:52:06AM -0300, Marcelo Ricardo Leitner wrote:
> On Tue, Sep 03, 2019 at 02:58:16PM +0800, Baolin Wang wrote:
> > From: Hariprasad Kelam <hariprasad.kelam@gmail.com>
> > 
> > This patch removes NULL checks before calling kfree.
> > 
> > fixes below issues reported by coccicheck
> > net/sctp/sm_make_chunk.c:2586:3-8: WARNING: NULL check before some
> > freeing functions is not needed.
> > net/sctp/sm_make_chunk.c:2652:3-8: WARNING: NULL check before some
> > freeing functions is not needed.
> > net/sctp/sm_make_chunk.c:2667:3-8: WARNING: NULL check before some
> > freeing functions is not needed.
> > net/sctp/sm_make_chunk.c:2684:3-8: WARNING: NULL check before some
> > freeing functions is not needed.
> 
> Hi. This doesn't seem the kind of patch that should be backported to
> such old/stable releases. After all, it's just a cleanup.

I agree, this does not seem necessary _unless_ it is needed for a later
real fix.

thanks,

greg k-h

Re: [BACKPORT 4.14.y 4/8] net: sctp: fix warning "NULL check before some freeing functions is not needed"

[Baolin Wang]

On Wed, 4 Sep 2019 at 02:33, Greg KH <greg@kroah.com> wrote:
>
> On Tue, Sep 03, 2019 at 11:52:06AM -0300, Marcelo Ricardo Leitner wrote:
> > On Tue, Sep 03, 2019 at 02:58:16PM +0800, Baolin Wang wrote:
> > > From: Hariprasad Kelam <hariprasad.kelam@gmail.com>
> > >
> > > This patch removes NULL checks before calling kfree.
> > >
> > > fixes below issues reported by coccicheck
> > > net/sctp/sm_make_chunk.c:2586:3-8: WARNING: NULL check before some
> > > freeing functions is not needed.
> > > net/sctp/sm_make_chunk.c:2652:3-8: WARNING: NULL check before some
> > > freeing functions is not needed.
> > > net/sctp/sm_make_chunk.c:2667:3-8: WARNING: NULL check before some
> > > freeing functions is not needed.
> > > net/sctp/sm_make_chunk.c:2684:3-8: WARNING: NULL check before some
> > > freeing functions is not needed.
> >
> > Hi. This doesn't seem the kind of patch that should be backported to
> > such old/stable releases. After all, it's just a cleanup.
>
> I agree, this does not seem necessary _unless_ it is needed for a later
> real fix.

It can remove warnings from our product kernel since this patch
(c4964bfaf433 sctp: Free cookie before we memdup a new one) was merged
into stable, we still need backport it to our product kernel manually.

But if you still think this is unnecessary, please ignore this patch.
Thanks for your comments.

-- 
Baolin Wang
Best Regards

Re: [BACKPORT 4.14.y 4/8] net: sctp: fix warning "NULL check before some freeing functions is not ne

[Baolin Wang]

On Wed, 4 Sep 2019 at 02:33, Greg KH <greg@kroah.com> wrote:
>
> On Tue, Sep 03, 2019 at 11:52:06AM -0300, Marcelo Ricardo Leitner wrote:
> > On Tue, Sep 03, 2019 at 02:58:16PM +0800, Baolin Wang wrote:
> > > From: Hariprasad Kelam <hariprasad.kelam@gmail.com>
> > >
> > > This patch removes NULL checks before calling kfree.
> > >
> > > fixes below issues reported by coccicheck
> > > net/sctp/sm_make_chunk.c:2586:3-8: WARNING: NULL check before some
> > > freeing functions is not needed.
> > > net/sctp/sm_make_chunk.c:2652:3-8: WARNING: NULL check before some
> > > freeing functions is not needed.
> > > net/sctp/sm_make_chunk.c:2667:3-8: WARNING: NULL check before some
> > > freeing functions is not needed.
> > > net/sctp/sm_make_chunk.c:2684:3-8: WARNING: NULL check before some
> > > freeing functions is not needed.
> >
> > Hi. This doesn't seem the kind of patch that should be backported to
> > such old/stable releases. After all, it's just a cleanup.
>
> I agree, this does not seem necessary _unless_ it is needed for a later
> real fix.

It can remove warnings from our product kernel since this patch
(c4964bfaf433 sctp: Free cookie before we memdup a new one) was merged
into stable, we still need backport it to our product kernel manually.

But if you still think this is unnecessary, please ignore this patch.
Thanks for your comments.

-- 
Baolin Wang
Best Regards

[BACKPORT 4.14.y 5/8] pinctrl: sprd: Use define directive for sprd_pinconf_params values

[Baolin Wang]

From: Nathan Chancellor <natechancellor@gmail.com>

Clang warns when one enumerated type is implicitly converted to another:

drivers/pinctrl/sprd/pinctrl-sprd.c:845:19: warning: implicit conversion
from enumeration type 'enum sprd_pinconf_params' to different
enumeration type 'enum pin_config_param' [-Wenum-conversion]
        {"sprd,control", SPRD_PIN_CONFIG_CONTROL, 0},
        ~                ^~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/sprd/pinctrl-sprd.c:846:22: warning: implicit conversion
from enumeration type 'enum sprd_pinconf_params' to different
enumeration type 'enum pin_config_param' [-Wenum-conversion]
        {"sprd,sleep-mode", SPRD_PIN_CONFIG_SLEEP_MODE, 0},
        ~                   ^~~~~~~~~~~~~~~~~~~~~~~~~~

It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.

Link: https://github.com/ClangBuiltLinux/linux/issues/138
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 drivers/pinctrl/sprd/pinctrl-sprd.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/sprd/pinctrl-sprd.c b/drivers/pinctrl/sprd/pinctrl-sprd.c
index 6352991..83958bd 100644
--- a/drivers/pinctrl/sprd/pinctrl-sprd.c
+++ b/drivers/pinctrl/sprd/pinctrl-sprd.c
@@ -159,10 +159,8 @@ struct sprd_pinctrl {
 	struct sprd_pinctrl_soc_info *info;
 };
 
-enum sprd_pinconf_params {
-	SPRD_PIN_CONFIG_CONTROL = PIN_CONFIG_END + 1,
-	SPRD_PIN_CONFIG_SLEEP_MODE = PIN_CONFIG_END + 2,
-};
+#define SPRD_PIN_CONFIG_CONTROL		(PIN_CONFIG_END + 1)
+#define SPRD_PIN_CONFIG_SLEEP_MODE	(PIN_CONFIG_END + 2)
 
 static int sprd_pinctrl_get_id_by_name(struct sprd_pinctrl *sprd_pctl,
 				       const char *name)
-- 
1.7.9.5

[BACKPORT 4.14.y 6/8] power: supply: sysfs: ratelimit property read error message

[Baolin Wang]

From: David Lechner <david@lechnology.com>

This adds rate limiting to the message that is printed when reading a
power supply property via sysfs returns an error. This will prevent
userspace applications from unintentionally dDOSing the system by
continuously reading a property that returns an error.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 drivers/power/supply/power_supply_sysfs.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/power/supply/power_supply_sysfs.c b/drivers/power/supply/power_supply_sysfs.c
index eb5dc74..2ccaf4f 100644
--- a/drivers/power/supply/power_supply_sysfs.c
+++ b/drivers/power/supply/power_supply_sysfs.c
@@ -91,7 +91,8 @@ static ssize_t power_supply_show_property(struct device *dev,
 				dev_dbg(dev, "driver has no data for `%s' property\n",
 					attr->attr.name);
 			else if (ret != -ENODEV && ret != -EAGAIN)
-				dev_err(dev, "driver failed to report `%s' property: %zd\n",
+				dev_err_ratelimited(dev,
+					"driver failed to report `%s' property: %zd\n",
 					attr->attr.name, ret);
 			return ret;
 		}
-- 
1.7.9.5

[BACKPORT 4.14.y 7/8] ppp: mppe: Revert "ppp: mppe: Add softdep to arc4"

[Baolin Wang]

From: Eric Biggers <ebiggers@google.com>

Commit 0e5a610b5ca5 ("ppp: mppe: switch to RC4 library interface"),
which was merged through the crypto tree for v5.3, changed ppp_mppe.c to
use the new arc4_crypt() library function rather than access RC4 through
the dynamic crypto_skcipher API.

Meanwhile commit aad1dcc4f011 ("ppp: mppe: Add softdep to arc4") was
merged through the net tree and added a module soft-dependency on "arc4".

The latter commit no longer makes sense because the code now uses the
"libarc4" module rather than "arc4", and also due to the direct use of
arc4_crypt(), no module soft-dependency is required.

So revert the latter commit.

Cc: Takashi Iwai <tiwai@suse.de>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 drivers/net/ppp/ppp_mppe.c |    1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ppp/ppp_mppe.c b/drivers/net/ppp/ppp_mppe.c
index d9eda7c..6c7fd98 100644
--- a/drivers/net/ppp/ppp_mppe.c
+++ b/drivers/net/ppp/ppp_mppe.c
@@ -63,7 +63,6 @@
 MODULE_DESCRIPTION("Point-to-Point Protocol Microsoft Point-to-Point Encryption support");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_ALIAS("ppp-compress-" __stringify(CI_MPPE));
-MODULE_SOFTDEP("pre: arc4");
 MODULE_VERSION("1.0.2");
 
 static unsigned int
-- 
1.7.9.5

[BACKPORT 4.14.y 7/8] ppp: mppe: Revert "ppp: mppe: Add softdep to arc4"

[Baolin Wang]

From: Eric Biggers <ebiggers@google.com>

Commit 0e5a610b5ca5 ("ppp: mppe: switch to RC4 library interface"),
which was merged through the crypto tree for v5.3, changed ppp_mppe.c to
use the new arc4_crypt() library function rather than access RC4 through
the dynamic crypto_skcipher API.

Meanwhile commit aad1dcc4f011 ("ppp: mppe: Add softdep to arc4") was
merged through the net tree and added a module soft-dependency on "arc4".

The latter commit no longer makes sense because the code now uses the
"libarc4" module rather than "arc4", and also due to the direct use of
arc4_crypt(), no module soft-dependency is required.

So revert the latter commit.

Cc: Takashi Iwai <tiwai@suse.de>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 drivers/net/ppp/ppp_mppe.c |    1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ppp/ppp_mppe.c b/drivers/net/ppp/ppp_mppe.c
index d9eda7c..6c7fd98 100644
--- a/drivers/net/ppp/ppp_mppe.c
+++ b/drivers/net/ppp/ppp_mppe.c
@@ -63,7 +63,6 @@
 MODULE_DESCRIPTION("Point-to-Point Protocol Microsoft Point-to-Point Encryption support");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_ALIAS("ppp-compress-" __stringify(CI_MPPE));
-MODULE_SOFTDEP("pre: arc4");
 MODULE_VERSION("1.0.2");
 
 static unsigned int
-- 
1.7.9.5

[BACKPORT 4.14.y 8/8] serial: sprd: Modify the baud rate calculation formula

[Baolin Wang]

From: Lanqing Liu <lanqing.liu@unisoc.com>

When the source clock is not divisible by the expected baud rate and
the remainder is not less than half of the expected baud rate, the old
formular will round up the frequency division coefficient. This will
make the actual baud rate less than the expected value and can not meet
the external transmission requirements.

Thus this patch modifies the baud rate calculation formula to support
the serial controller output the maximum baud rate.

Signed-off-by: Lanqing Liu <lanqing.liu@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 drivers/tty/serial/sprd_serial.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index e902494..72e96ab8 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -380,7 +380,7 @@ static void sprd_set_termios(struct uart_port *port,
 	/* ask the core to calculate the divisor for us */
 	baud = uart_get_baud_rate(port, termios, old, 0, SPRD_BAUD_IO_LIMIT);
 
-	quot = (unsigned int)((port->uartclk + baud / 2) / baud);
+	quot = port->uartclk / baud;
 
 	/* set data length */
 	switch (termios->c_cflag & CSIZE) {
-- 
1.7.9.5