Re: [GIT PULL] kbuild changes for v4.9-rc1

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Adam Borowski]

On Mon, Oct 17, 2016 at 02:57:09PM +1100, Nicholas Piggin wrote:
> On Sat, 15 Oct 2016 17:22:05 -0700 Omar Sandoval <osandov@osandov.com> wrote:
> > On Fri, Oct 14, 2016 at 10:12:46PM +0200, Michal Marek wrote:
> > > please pull these kbuild changes for v4.9-rc1:
> > > 
> > > - EXPORT_SYMBOL for asm source by Al Viro. This does bring a regression,
> > >   because genksyms no longer generates checksums for these symbols
> > >   (CONFIG_MODVERSIONS). Nick Piggin is working on a patch to fix this.
> > >   Plus, we are talking about functions like strcpy(), which rarely
> > >   change prototypes.  
> > 
> > So this has broken all module loading for me. I get the following dmesg
> > spew:
> > ...
> > [    4.586914] scsi_mod: no symbol version for memset
> > [    4.587920] scsi_mod: Unknown symbol memset (err -22)
> > [    4.588443] scsi_mod: no symbol version for ___preempt_schedule
> > [    4.589026] scsi_mod: Unknown symbol ___preempt_schedule (err -22)
> > ...
> > 
> > Reverting 784d5699eddc ("x86: move exports to actual definitions") fixes
> > it for me. This is with GCC 6.2.1, binutils 2.27, attached config.
> 
> Thanks for the report. Could you try this patch and see if it helps?
[patch snipped]

Omar probably won't wake up in quite a while, so I've tested the patch.
Alas, doesn't help.  Similar spew (for the few modules I don't have =y),
while reverting 784d5699eddc fixes it for me too.

Debian sid toolchain: gcc 6.2.0-6, binutils 2.27-8, config at
https://angband.pl/tmp/config-4.9.0-rc1-debug+.gz


Meow!
-- 
A MAP07 (Dead Simple) raspberry tincture recipe: 0.5l 95% alcohol, 1kg
raspberries, 0.4kg sugar; put into a big jar for 1 month.  Filter out and
throw away the fruits (can dump them into a cake, etc), let the drink age
at least 3-6 months.

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Nicholas Piggin]

On Mon, 17 Oct 2016 08:51:31 +0200
Adam Borowski <kilobyte@angband.pl> wrote:

> On Mon, Oct 17, 2016 at 02:57:09PM +1100, Nicholas Piggin wrote:
> > On Sat, 15 Oct 2016 17:22:05 -0700 Omar Sandoval <osandov@osandov.com> wrote:  
> > > On Fri, Oct 14, 2016 at 10:12:46PM +0200, Michal Marek wrote:  
> > > > please pull these kbuild changes for v4.9-rc1:
> > > > 
> > > > - EXPORT_SYMBOL for asm source by Al Viro. This does bring a regression,
> > > >   because genksyms no longer generates checksums for these symbols
> > > >   (CONFIG_MODVERSIONS). Nick Piggin is working on a patch to fix this.
> > > >   Plus, we are talking about functions like strcpy(), which rarely
> > > >   change prototypes.    
> > > 
> > > So this has broken all module loading for me. I get the following dmesg
> > > spew:
> > > ...
> > > [    4.586914] scsi_mod: no symbol version for memset
> > > [    4.587920] scsi_mod: Unknown symbol memset (err -22)
> > > [    4.588443] scsi_mod: no symbol version for ___preempt_schedule
> > > [    4.589026] scsi_mod: Unknown symbol ___preempt_schedule (err -22)
> > > ...
> > > 
> > > Reverting 784d5699eddc ("x86: move exports to actual definitions") fixes
> > > it for me. This is with GCC 6.2.1, binutils 2.27, attached config.  
> > 
> > Thanks for the report. Could you try this patch and see if it helps?  
> [patch snipped]
> 
> Omar probably won't wake up in quite a while, so I've tested the patch.
> Alas, doesn't help.  Similar spew (for the few modules I don't have =y),
> while reverting 784d5699eddc fixes it for me too.
> 
> Debian sid toolchain: gcc 6.2.0-6, binutils 2.27-8, config at
> https://angband.pl/tmp/config-4.9.0-rc1-debug+.gz

Forgot to engage my brain before posting.

Architectures will need to have an include/asm/asm-prototypes.h that
defines or #include<>s C-style prototypes for exported asm functions.
We can do an asm-generic version for the common ones like memset so
there's not a lot of pointless duplication there.

Care to do a patch for x86?

Thanks,
Nick

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Adam Borowski]

On Mon, Oct 17, 2016 at 05:59:51PM +1100, Nicholas Piggin wrote:
> On Mon, 17 Oct 2016 08:51:31 +0200
> Adam Borowski <kilobyte@angband.pl> wrote:
> > On Mon, Oct 17, 2016 at 02:57:09PM +1100, Nicholas Piggin wrote:
> > > On Sat, 15 Oct 2016 17:22:05 -0700 Omar Sandoval <osandov@osandov.com> wrote:  
> > > > So this has broken all module loading for me. I get the following dmesg
> > > > spew:
> > > > ...
> > > > [    4.586914] scsi_mod: no symbol version for memset
> > > > [    4.587920] scsi_mod: Unknown symbol memset (err -22)
> > > > [    4.588443] scsi_mod: no symbol version for ___preempt_schedule
> > > > [    4.589026] scsi_mod: Unknown symbol ___preempt_schedule (err -22)
> > > > ...
> > > > 
> > > > Reverting 784d5699eddc ("x86: move exports to actual definitions") fixes
> > > > it for me. This is with GCC 6.2.1, binutils 2.27, attached config.  
> > > 
> > > Thanks for the report. Could you try this patch and see if it helps?  
> > [patch snipped]
> > 
> > Omar probably won't wake up in quite a while, so I've tested the patch.
> > Alas, doesn't help.  Similar spew (for the few modules I don't have =y),
> > while reverting 784d5699eddc fixes it for me too.
> 
> Forgot to engage my brain before posting.
> 
> Architectures will need to have an include/asm/asm-prototypes.h that
> defines or #include<>s C-style prototypes for exported asm functions.
> We can do an asm-generic version for the common ones like memset so
> there's not a lot of pointless duplication there.
> 
> Care to do a patch for x86?

Sure, did so.  With the prototypes added, your patch works!
Tested on a handful of modules, and one out-of-tree (virtualbox).
I didn't try a 32-bit build.

Note that powerpc already has an include/asm/asm-prototypes.h which might or
might not be what you want.  It doesn't have memset and co, for example.

Anyway, here's my stab at x86:


>From db746df65b920591606398b4b244f5b6dc9eea04 Mon Sep 17 00:00:00 2001
From: Adam Borowski <kilobyte@angband.pl>
Date: Mon, 17 Oct 2016 11:42:35 +0200
Subject: [PATCH] kbuild: provide include/asm/asm-prototypes.h for x86

Nicholas Piggin wrote:
> Architectures will need to have an include/asm/asm-prototypes.h that
> defines or #include<>s C-style prototypes for exported asm functions.
> We can do an asm-generic version for the common ones like memset so
> there's not a lot of pointless duplication there.

Signed-off-by: Adam Borowski <kilobyte@angband.pl>
---
 arch/x86/include/asm/asm-prototypes.h | 13 +++++++++++++
 include/asm-generic/asm-prototypes.h  |  7 +++++++
 2 files changed, 20 insertions(+)
 create mode 100644 arch/x86/include/asm/asm-prototypes.h
 create mode 100644 include/asm-generic/asm-prototypes.h

diff --git a/arch/x86/include/asm/asm-prototypes.h b/arch/x86/include/asm/asm-prototypes.h
new file mode 100644
index 0000000..072c97c
--- /dev/null
+++ b/arch/x86/include/asm/asm-prototypes.h
@@ -0,0 +1,13 @@
+#include <asm/ftrace.h>
+#include <asm/uaccess.h>
+#include <asm/uaccess.h>
+#include <asm/string.h>
+#include <asm/page.h>
+#include <asm/checksum.h>
+
+#include <asm-generic/asm-prototypes.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/special_insns.h>
+#include <asm/preempt.h>
diff --git a/include/asm-generic/asm-prototypes.h b/include/asm-generic/asm-prototypes.h
new file mode 100644
index 0000000..df13637
--- /dev/null
+++ b/include/asm-generic/asm-prototypes.h
@@ -0,0 +1,7 @@
+#include <linux/bitops.h>
+extern void *__memset(void *, int, __kernel_size_t);
+extern void *__memcpy(void *, const void *, __kernel_size_t);
+extern void *__memmove(void *, const void *, __kernel_size_t);
+extern void *memset(void *, int, __kernel_size_t);
+extern void *memcpy(void *, const void *, __kernel_size_t);
+extern void *memmove(void *, const void *, __kernel_size_t);
-- 
2.9.3

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Adam Borowski]

On Mon, Oct 17, 2016 at 05:59:51PM +1100, Nicholas Piggin wrote:
> On Mon, 17 Oct 2016 08:51:31 +0200
> Adam Borowski <kilobyte@angband.pl> wrote:
> > On Mon, Oct 17, 2016 at 02:57:09PM +1100, Nicholas Piggin wrote:
> > > On Sat, 15 Oct 2016 17:22:05 -0700 Omar Sandoval <osandov@osandov.com> wrote:  
> > > > So this has broken all module loading for me. I get the following dmesg
> > > > spew:
> > > > ...
> > > > [    4.586914] scsi_mod: no symbol version for memset
> > > > [    4.587920] scsi_mod: Unknown symbol memset (err -22)
> > > > [    4.588443] scsi_mod: no symbol version for ___preempt_schedule
> > > > [    4.589026] scsi_mod: Unknown symbol ___preempt_schedule (err -22)
> > > > ...
> > > > 
> > > > Reverting 784d5699eddc ("x86: move exports to actual definitions") fixes
> > > > it for me. This is with GCC 6.2.1, binutils 2.27, attached config.  
> > > 
> > > Thanks for the report. Could you try this patch and see if it helps?  
> > [patch snipped]
> > 
> > Omar probably won't wake up in quite a while, so I've tested the patch.
> > Alas, doesn't help.  Similar spew (for the few modules I don't have =y),
> > while reverting 784d5699eddc fixes it for me too.
> 
> Forgot to engage my brain before posting.
> 
> Architectures will need to have an include/asm/asm-prototypes.h that
> defines or #include<>s C-style prototypes for exported asm functions.
> We can do an asm-generic version for the common ones like memset so
> there's not a lot of pointless duplication there.
> 
> Care to do a patch for x86?

Sure, did so.  With the prototypes added, your patch works!
Tested on a handful of modules, and one out-of-tree (virtualbox).
I didn't try a 32-bit build.

Note that powerpc already has an include/asm/asm-prototypes.h which might or
might not be what you want.  It doesn't have memset and co, for example.

Anyway, here's my stab at x86:


From db746df65b920591606398b4b244f5b6dc9eea04 Mon Sep 17 00:00:00 2001
From: Adam Borowski <kilobyte@angband.pl>
Date: Mon, 17 Oct 2016 11:42:35 +0200
Subject: [PATCH] kbuild: provide include/asm/asm-prototypes.h for x86

Nicholas Piggin wrote:
> Architectures will need to have an include/asm/asm-prototypes.h that
> defines or #include<>s C-style prototypes for exported asm functions.
> We can do an asm-generic version for the common ones like memset so
> there's not a lot of pointless duplication there.

Signed-off-by: Adam Borowski <kilobyte@angband.pl>
---
 arch/x86/include/asm/asm-prototypes.h | 13 +++++++++++++
 include/asm-generic/asm-prototypes.h  |  7 +++++++
 2 files changed, 20 insertions(+)
 create mode 100644 arch/x86/include/asm/asm-prototypes.h
 create mode 100644 include/asm-generic/asm-prototypes.h

diff --git a/arch/x86/include/asm/asm-prototypes.h b/arch/x86/include/asm/asm-prototypes.h
new file mode 100644
index 0000000..072c97c
--- /dev/null
+++ b/arch/x86/include/asm/asm-prototypes.h
@@ -0,0 +1,13 @@
+#include <asm/ftrace.h>
+#include <asm/uaccess.h>
+#include <asm/uaccess.h>
+#include <asm/string.h>
+#include <asm/page.h>
+#include <asm/checksum.h>
+
+#include <asm-generic/asm-prototypes.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/special_insns.h>
+#include <asm/preempt.h>
diff --git a/include/asm-generic/asm-prototypes.h b/include/asm-generic/asm-prototypes.h
new file mode 100644
index 0000000..df13637
--- /dev/null
+++ b/include/asm-generic/asm-prototypes.h
@@ -0,0 +1,7 @@
+#include <linux/bitops.h>
+extern void *__memset(void *, int, __kernel_size_t);
+extern void *__memcpy(void *, const void *, __kernel_size_t);
+extern void *__memmove(void *, const void *, __kernel_size_t);
+extern void *memset(void *, int, __kernel_size_t);
+extern void *memcpy(void *, const void *, __kernel_size_t);
+extern void *memmove(void *, const void *, __kernel_size_t);
-- 
2.9.3

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Adam Borowski]

On Mon, Oct 17, 2016 at 05:59:51PM +1100, Nicholas Piggin wrote:
> On Mon, 17 Oct 2016 08:51:31 +0200
> Adam Borowski <kilobyte@angband.pl> wrote:
> > On Mon, Oct 17, 2016 at 02:57:09PM +1100, Nicholas Piggin wrote:
> > > On Sat, 15 Oct 2016 17:22:05 -0700 Omar Sandoval <osandov@osandov.com> wrote:  
> > > > So this has broken all module loading for me. I get the following dmesg
> > > > spew:
> > > > ...
> > > > [    4.586914] scsi_mod: no symbol version for memset
> > > > [    4.587920] scsi_mod: Unknown symbol memset (err -22)
> > > > [    4.588443] scsi_mod: no symbol version for ___preempt_schedule
> > > > [    4.589026] scsi_mod: Unknown symbol ___preempt_schedule (err -22)
> > > > ...
> > > > 
> > > > Reverting 784d5699eddc ("x86: move exports to actual definitions") fixes
> > > > it for me. This is with GCC 6.2.1, binutils 2.27, attached config.  
> > > 
> > > Thanks for the report. Could you try this patch and see if it helps?  
> > [patch snipped]
> > 
> > Omar probably won't wake up in quite a while, so I've tested the patch.
> > Alas, doesn't help.  Similar spew (for the few modules I don't have =y),
> > while reverting 784d5699eddc fixes it for me too.
> 
> Forgot to engage my brain before posting.
> 
> Architectures will need to have an include/asm/asm-prototypes.h that
> defines or #include<>s C-style prototypes for exported asm functions.
> We can do an asm-generic version for the common ones like memset so
> there's not a lot of pointless duplication there.
> 
> Care to do a patch for x86?

Sure, did so.  With the prototypes added, your patch works!
Tested on a handful of modules, and one out-of-tree (virtualbox).
I didn't try a 32-bit build.

Note that powerpc already has an include/asm/asm-prototypes.h which might or
might not be what you want.  It doesn't have memset and co, for example.

Anyway, here's my stab at x86:

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Alexey Dobriyan]

On Mon, Oct 17, 2016 at 1:01 PM, Adam Borowski <kilobyte@angband.pl> wrote:
> On Mon, Oct 17, 2016 at 05:59:51PM +1100, Nicholas Piggin wrote:
>> On Mon, 17 Oct 2016 08:51:31 +0200
>> Adam Borowski <kilobyte@angband.pl> wrote:

> --- /dev/null
> +++ b/include/asm-generic/asm-prototypes.h
> @@ -0,0 +1,7 @@
> +#include <linux/bitops.h>
> +extern void *__memset(void *, int, __kernel_size_t);
> +extern void *__memcpy(void *, const void *, __kernel_size_t);
> +extern void *__memmove(void *, const void *, __kernel_size_t);
> +extern void *memset(void *, int, __kernel_size_t);
> +extern void *memcpy(void *, const void *, __kernel_size_t);
> +extern void *memmove(void *, const void *, __kernel_size_t);

Before too late, those extern keywords aren't needed and
only slowdown compilation.

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Geert Uytterhoeven]

Hi Alexey,

On Mon, Oct 17, 2016 at 1:12 PM, Alexey Dobriyan <adobriyan@gmail.com> wrote:
> On Mon, Oct 17, 2016 at 1:01 PM, Adam Borowski <kilobyte@angband.pl> wrote:
>> On Mon, Oct 17, 2016 at 05:59:51PM +1100, Nicholas Piggin wrote:
>>> On Mon, 17 Oct 2016 08:51:31 +0200
>>> Adam Borowski <kilobyte@angband.pl> wrote:
>
>> --- /dev/null
>> +++ b/include/asm-generic/asm-prototypes.h
>> @@ -0,0 +1,7 @@
>> +#include <linux/bitops.h>
>> +extern void *__memset(void *, int, __kernel_size_t);
>> +extern void *__memcpy(void *, const void *, __kernel_size_t);
>> +extern void *__memmove(void *, const void *, __kernel_size_t);
>> +extern void *memset(void *, int, __kernel_size_t);
>> +extern void *memcpy(void *, const void *, __kernel_size_t);
>> +extern void *memmove(void *, const void *, __kernel_size_t);
>
> Before too late, those extern keywords aren't needed and
> only slowdown compilation.

Do you have any profiling data backing this?

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Alexey Dobriyan]

On Mon, Oct 17, 2016 at 2:17 PM, Geert Uytterhoeven
<geert@linux-m68k.org> wrote:
> Hi Alexey,
>
> On Mon, Oct 17, 2016 at 1:12 PM, Alexey Dobriyan <adobriyan@gmail.com> wrote:
>> On Mon, Oct 17, 2016 at 1:01 PM, Adam Borowski <kilobyte@angband.pl> wrote:
>>> On Mon, Oct 17, 2016 at 05:59:51PM +1100, Nicholas Piggin wrote:
>>>> On Mon, 17 Oct 2016 08:51:31 +0200
>>>> Adam Borowski <kilobyte@angband.pl> wrote:
>>
>>> --- /dev/null
>>> +++ b/include/asm-generic/asm-prototypes.h
>>> @@ -0,0 +1,7 @@
>>> +#include <linux/bitops.h>
>>> +extern void *__memset(void *, int, __kernel_size_t);
>>> +extern void *__memcpy(void *, const void *, __kernel_size_t);
>>> +extern void *__memmove(void *, const void *, __kernel_size_t);
>>> +extern void *memset(void *, int, __kernel_size_t);
>>> +extern void *memcpy(void *, const void *, __kernel_size_t);
>>> +extern void *memmove(void *, const void *, __kernel_size_t);
>>
>> Before too late, those extern keywords aren't needed and
>> only slowdown compilation.
>
> Do you have any profiling data backing this?

It is easy to obtain. Here is top 10 with runtime bigger than 0.50%:

_int_malloc
ht_lookup_with_hash
_cpp_lex_direct
cpp_get_token_1
ggc_internal_alloc_statm
_int_free
malloc_consolidate
lex_identifier
enter_macro_context
c_lex_with_flags
bitmap_set_bit
malloc
grokdeclarator
htab_find_slot_with_hash
c_lex_one_token
_cpp_lex_token
pop_scopev
c_parser_declspecs

Imagine you're a compiler. Those extern's are tokens. They need to be parsed
(byte-by-byte), allocated, and, in case of "extern" with prototype, thrown away.
They make line longer forcing people to dance around with splitting
per 80 characters
and generally making everything somewhat slower. Might as well don't new ones.

bitops.h is wrong header as well.
Why do you need bitops for bunch of function prototypes?

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Mathieu OTHACEHE]

> +#include <asm/uaccess.h>
> +#include <asm/uaccess.h>

Included twice.

> +#include <asm/string.h>
> +#include <asm/page.h>
> +#include <asm/checksum.h>
> +
> +#include <asm-generic/asm-prototypes.h>
> +
> +#include <asm/page.h>
> +#include <asm/pgtable.h>
> +#include <asm/special_insns.h>
> +#include <asm/preempt.h>

No <asm/arch_hweight.h> for __sw_hweight32 and __sw_hweight64 ? 

[PATCH] kbuild: provide include/asm/asm-prototypes.h for ARM

[Arnd Bergmann]

This adds an asm/asm-prototypes.h header for ARM to fix the
broken symbol versioning for symbols exported from assembler
files.

In addition to the header, we have to do these other small
changes:

- move the 'extern' declarations out of memset_io/memcpy_io
  to make them visible to the symbol version generator
- move the exports from bitops.h to {change,clear,set,...}bit.S
- move the exports from csumpartialgeneric.S into the files
  including it

I couldn't find the correct prototypes for the compiler builtins,
so I went with the fake 'void f(void)' prototypes that we had
before.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/arch/arm/include/asm/asm-prototypes.h b/arch/arm/include/asm/asm-prototypes.h
new file mode 100644
index 000000000000..04e5616a7b15
--- /dev/null
+++ b/arch/arm/include/asm/asm-prototypes.h
@@ -0,0 +1,34 @@
+#include <linux/arm-smccc.h>
+#include <linux/bitops.h>
+#include <linux/ftrace.h>
+#include <linux/io.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
+#include <linux/string.h>
+#include <linux/uaccess.h>
+
+#include <asm/checksum.h>
+#include <asm/div64.h>
+#include <asm/memory.h>
+
+extern void __aeabi_idivmod(void);
+extern void __aeabi_idiv(void);
+extern void __aeabi_lasr(void);
+extern void __aeabi_llsl(void);
+extern void __aeabi_llsr(void);
+extern void __aeabi_lmul(void);
+extern void __aeabi_uidivmod(void);
+extern void __aeabi_uidiv(void);
+extern void __aeabi_ulcmp(void);
+
+extern void __ashldi3(void);
+extern void __ashrdi3(void);
+extern void __bswapdi2(void);
+extern void __bswapsi2(void);
+extern void __divsi3(void);
+extern void __do_div64(void);
+extern void __lshrdi3(void);
+extern void __modsi3(void);
+extern void __muldi3(void);
+extern void __ucmpdi2(void);
+extern void __udivsi3(void);
+extern void __umodsi3(void);
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 51458d8273ad..fbc3695293cf 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -316,11 +316,13 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
 #define writesw(p,d,l)		__raw_writesw(p,d,l)
 #define writesl(p,d,l)		__raw_writesl(p,d,l)
 
+extern void mmioset(void *, unsigned int, size_t);
+extern void mmiocpy(void *, const void *, size_t);
+
 #ifndef __ARMBE__
 static inline void memset_io(volatile void __iomem *dst, unsigned c,
 	size_t count)
 {
-	extern void mmioset(void *, unsigned int, size_t);
 	mmioset((void __force *)dst, c, count);
 }
 #define memset_io(dst,c,count) memset_io(dst,c,count)
@@ -328,7 +330,6 @@ static inline void memset_io(volatile void __iomem *dst, unsigned c,
 static inline void memcpy_fromio(void *to, const volatile void __iomem *from,
 	size_t count)
 {
-	extern void mmiocpy(void *, const void *, size_t);
 	mmiocpy(to, (const void __force *)from, count);
 }
 #define memcpy_fromio(to,from,count) memcpy_fromio(to,from,count)
@@ -336,7 +337,6 @@ static inline void memcpy_fromio(void *to, const volatile void __iomem *from,
 static inline void memcpy_toio(volatile void __iomem *to, const void *from,
 	size_t count)
 {
-	extern void mmiocpy(void *, const void *, size_t);
 	mmiocpy((void __force *)to, from, count);
 }
 #define memcpy_toio(to,from,count) memcpy_toio(to,from,count)
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index df06638b327c..afaef2a7faec 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -26,7 +26,6 @@ UNWIND(	.fnstart	)
 	bx	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
-EXPORT_SYMBOL(\name	)
 	.endm
 
 	.macro	testop, name, instr, store
@@ -57,7 +56,6 @@ UNWIND(	.fnstart	)
 2:	bx	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
-EXPORT_SYMBOL(\name	)
 	.endm
 #else
 	.macro	bitop, name, instr
@@ -77,7 +75,6 @@ UNWIND(	.fnstart	)
 	ret	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
-EXPORT_SYMBOL(\name	)
 	.endm
 
 /**
@@ -106,6 +103,5 @@ UNWIND(	.fnstart	)
 	ret	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
-EXPORT_SYMBOL(\name	)
 	.endm
 #endif
diff --git a/arch/arm/lib/changebit.S b/arch/arm/lib/changebit.S
index f4027862172f..005fdd18c509 100644
--- a/arch/arm/lib/changebit.S
+++ b/arch/arm/lib/changebit.S
@@ -13,3 +13,4 @@
                 .text
 
 bitop	_change_bit, eor
+EXPORT_SYMBOL(_change_bit)
diff --git a/arch/arm/lib/clearbit.S b/arch/arm/lib/clearbit.S
index f6b75fb64d30..501eff09968d 100644
--- a/arch/arm/lib/clearbit.S
+++ b/arch/arm/lib/clearbit.S
@@ -13,3 +13,4 @@
                 .text
 
 bitop	_clear_bit, bic
+EXPORT_SYMBOL(_clear_bit)
diff --git a/arch/arm/lib/csumpartialcopy.S b/arch/arm/lib/csumpartialcopy.S
index 9c3383fed129..bdcc2eea4e5c 100644
--- a/arch/arm/lib/csumpartialcopy.S
+++ b/arch/arm/lib/csumpartialcopy.S
@@ -49,6 +49,7 @@
 
 #define FN_ENTRY	ENTRY(csum_partial_copy_nocheck)
 #define FN_EXIT		ENDPROC(csum_partial_copy_nocheck)
-#define FN_EXPORT	EXPORT_SYMBOL(csum_partial_copy_nocheck)
 
 #include "csumpartialcopygeneric.S"
+
+EXPORT_SYMBOL(csum_partial_copy_nocheck)
diff --git a/arch/arm/lib/csumpartialcopygeneric.S b/arch/arm/lib/csumpartialcopygeneric.S
index 8b94d20e51d1..06825566c0f7 100644
--- a/arch/arm/lib/csumpartialcopygeneric.S
+++ b/arch/arm/lib/csumpartialcopygeneric.S
@@ -332,4 +332,3 @@ FN_ENTRY
 		mov	r5, r4, get_byte_1
 		b	.Lexit
 FN_EXIT
-FN_EXPORT
diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S
index 5d495edf3d83..d5522c94f58c 100644
--- a/arch/arm/lib/csumpartialcopyuser.S
+++ b/arch/arm/lib/csumpartialcopyuser.S
@@ -73,9 +73,9 @@
 
 #define FN_ENTRY	ENTRY(csum_partial_copy_from_user)
 #define FN_EXIT		ENDPROC(csum_partial_copy_from_user)
-#define FN_EXPORT	EXPORT_SYMBOL(csum_partial_copy_from_user)
 
 #include "csumpartialcopygeneric.S"
+EXPORT_SYMBOL(csum_partial_copy_from_user)
 
 /*
  * FIXME: minor buglet here
diff --git a/arch/arm/lib/setbit.S b/arch/arm/lib/setbit.S
index 618fedae4b37..d748b8d1326f 100644
--- a/arch/arm/lib/setbit.S
+++ b/arch/arm/lib/setbit.S
@@ -13,3 +13,4 @@
 		.text
 
 bitop	_set_bit, orr
+EXPORT_SYMBOL(_set_bit)
diff --git a/arch/arm/lib/testchangebit.S b/arch/arm/lib/testchangebit.S
index 4becdc3a59cb..4d2dafa9b787 100644
--- a/arch/arm/lib/testchangebit.S
+++ b/arch/arm/lib/testchangebit.S
@@ -13,3 +13,4 @@
                 .text
 
 testop	_test_and_change_bit, eor, str
+EXPORT_SYMBOL(_test_and_change_bit)
diff --git a/arch/arm/lib/testclearbit.S b/arch/arm/lib/testclearbit.S
index 918841dcce7a..fe5cae2e480a 100644
--- a/arch/arm/lib/testclearbit.S
+++ b/arch/arm/lib/testclearbit.S
@@ -13,3 +13,4 @@
                 .text
 
 testop	_test_and_clear_bit, bicne, strne
+EXPORT_SYMBOL(_test_and_clear_bit)
diff --git a/arch/arm/lib/testsetbit.S b/arch/arm/lib/testsetbit.S
index 8d1b2fe9e487..25fed837edb3 100644
--- a/arch/arm/lib/testsetbit.S
+++ b/arch/arm/lib/testsetbit.S
@@ -13,3 +13,4 @@
                 .text
 
 testop	_test_and_set_bit, orreq, streq
+EXPORT_SYMBOL(_test_and_set_bit)

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Adam Borowski]

On Mon, Oct 17, 2016 at 02:22:34PM +0200, Mathieu OTHACEHE wrote:
> > +#include <asm/uaccess.h>
> > +#include <asm/uaccess.h>
> 
> Included twice.

D'oh!

> > +#include <asm/string.h>
> > +#include <asm/page.h>
> > +#include <asm/checksum.h>
> > +
> > +#include <asm-generic/asm-prototypes.h>
> > +
> > +#include <asm/page.h>
> > +#include <asm/pgtable.h>
> > +#include <asm/special_insns.h>
> > +#include <asm/preempt.h>
> 
> No <asm/arch_hweight.h> for __sw_hweight32 and __sw_hweight64 ? 

diff --git a/include/asm-generic/asm-prototypes.h b/include/asm-generic/asm-prototypes.h
new file mode 100644
index 0000000..df13637
--- /dev/null
+++ b/include/asm-generic/asm-prototypes.h
@@ -0,0 +1,7 @@
+#include <linux/bitops.h>

... which has these.

Alexey Dobriyan <adobriyan@gmail.com> wrote:
} bitops.h is wrong header as well.
} Why do you need bitops for bunch of function prototypes?

Unless you guys prefer using low-level headers only, that is.


Meow!
-- 
A MAP07 (Dead Simple) raspberry tincture recipe: 0.5l 95% alcohol, 1kg
raspberries, 0.4kg sugar; put into a big jar for 1 month.  Filter out and
throw away the fruits (can dump them into a cake, etc), let the drink age
at least 3-6 months.

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Nicholas Piggin]

Hi Adam,

Thanks, this is looking good. powerpc will be able to use the generic
header.

On Tue, 18 Oct 2016 02:16:26 +0200
Adam Borowski <kilobyte@angband.pl> wrote:

> On Mon, Oct 17, 2016 at 02:22:34PM +0200, Mathieu OTHACEHE wrote:
> > > +#include <asm/uaccess.h>
> > > +#include <asm/uaccess.h>  
> > 
> > Included twice.  
> 
> D'oh!
> 
> > > +#include <asm/string.h>
> > > +#include <asm/page.h>
> > > +#include <asm/checksum.h>
> > > +
> > > +#include <asm-generic/asm-prototypes.h>
> > > +
> > > +#include <asm/page.h>
> > > +#include <asm/pgtable.h>
> > > +#include <asm/special_insns.h>
> > > +#include <asm/preempt.h>  
> > 
> > No <asm/arch_hweight.h> for __sw_hweight32 and __sw_hweight64 ?   
> 
> diff --git a/include/asm-generic/asm-prototypes.h b/include/asm-generic/asm-prototypes.h
> new file mode 100644
> index 0000000..df13637
> --- /dev/null
> +++ b/include/asm-generic/asm-prototypes.h
> @@ -0,0 +1,7 @@
> +#include <linux/bitops.h>
> 
> ... which has these.
> 
> Alexey Dobriyan <adobriyan@gmail.com> wrote:
> } bitops.h is wrong header as well.
> } Why do you need bitops for bunch of function prototypes?
> 
> Unless you guys prefer using low-level headers only, that is.

Well you can't use asm/arch_hweight.h in a generic header of course.
I would suggest just including linux/ variants where practical for
the asm-generic/asm-prototypes.h header.

We should probably just bring all these arch patches through the
kbuild tree.

I'm sorry for the breakage: I didn't realize it broke the build with
some configs, otherwise I would have given Michal a heads up before
his pull request, and worked to get this stuff in first.

Thanks,
Nick

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Michal Marek]

Dne 18.10.2016 v 03:34 Nicholas Piggin napsal(a):
> We should probably just bring all these arch patches through the
> kbuild tree.
> 
> I'm sorry for the breakage: I didn't realize it broke the build with
> some configs, otherwise I would have given Michal a heads up before
> his pull request, and worked to get this stuff in first.

It breaks with some binutils versions only (and only with
CONFIG_MODVERSIONS=y, of course).

Michal

Re: [PATCH] kbuild: provide include/asm/asm-prototypes.h for ARM

[Michal Marek]

Dne 17.10.2016 v 14:26 Arnd Bergmann napsal(a):
> This adds an asm/asm-prototypes.h header for ARM to fix the
> broken symbol versioning for symbols exported from assembler
> files.
> 
> In addition to the header, we have to do these other small
> changes:
> 
> - move the 'extern' declarations out of memset_io/memcpy_io
>   to make them visible to the symbol version generator
> - move the exports from bitops.h to {change,clear,set,...}bit.S
> - move the exports from csumpartialgeneric.S into the files
>   including it
> 
> I couldn't find the correct prototypes for the compiler builtins,
> so I went with the fake 'void f(void)' prototypes that we had
> before.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Hi Arnd,

just to make sure I'm looking at the right code - is this based on the
patch by Nick here: https://patchwork.kernel.org/patch/9377783/?

Thanks,
Michal

Re: [PATCH] kbuild: provide include/asm/asm-prototypes.h for ARM

[Arnd Bergmann]

On Wednesday, October 19, 2016 4:52:06 PM CEST Michal Marek wrote:
> Dne 17.10.2016 v 14:26 Arnd Bergmann napsal(a):
> > This adds an asm/asm-prototypes.h header for ARM to fix the
> > broken symbol versioning for symbols exported from assembler
> > files.
> > 
> > In addition to the header, we have to do these other small
> > changes:
> > 
> > - move the 'extern' declarations out of memset_io/memcpy_io
> >   to make them visible to the symbol version generator
> > - move the exports from bitops.h to {change,clear,set,...}bit.S
> > - move the exports from csumpartialgeneric.S into the files
> >   including it
> > 
> > I couldn't find the correct prototypes for the compiler builtins,
> > so I went with the fake 'void f(void)' prototypes that we had
> > before.
> > 
> > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> 
> Hi Arnd,
> 
> just to make sure I'm looking at the right code - is this based on the
> patch by Nick here: https://patchwork.kernel.org/patch/9377783/?
> 

(adding Russell to Cc, I missed him during my earlier mail, which
is now archived at https://lkml.org/lkml/2016/10/17/356)

Correct.  I had imported Nick's patch into my randconfig tree and
this is what I needed to build all configurations cleanly with it.

	Arnd

Re: [PATCH] kbuild: provide include/asm/asm-prototypes.h for ARM

[Russell King - ARM Linux]

On Wed, Oct 19, 2016 at 05:02:55PM +0200, Arnd Bergmann wrote:
> On Wednesday, October 19, 2016 4:52:06 PM CEST Michal Marek wrote:
> > Dne 17.10.2016 v 14:26 Arnd Bergmann napsal(a):
> > > This adds an asm/asm-prototypes.h header for ARM to fix the
> > > broken symbol versioning for symbols exported from assembler
> > > files.
> > > 
> > > In addition to the header, we have to do these other small
> > > changes:
> > > 
> > > - move the 'extern' declarations out of memset_io/memcpy_io
> > >   to make them visible to the symbol version generator
> > > - move the exports from bitops.h to {change,clear,set,...}bit.S
> > > - move the exports from csumpartialgeneric.S into the files
> > >   including it
> > > 
> > > I couldn't find the correct prototypes for the compiler builtins,
> > > so I went with the fake 'void f(void)' prototypes that we had
> > > before.
> > > 
> > > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> > 
> > Hi Arnd,
> > 
> > just to make sure I'm looking at the right code - is this based on the
> > patch by Nick here: https://patchwork.kernel.org/patch/9377783/?
> > 
> 
> (adding Russell to Cc, I missed him during my earlier mail, which
> is now archived at https://lkml.org/lkml/2016/10/17/356)

I'm not in favour of this.

   +extern void mmioset(void *, unsigned int, size_t);
   +extern void mmiocpy(void *, const void *, size_t);
   +
    #ifndef __ARMBE__
    static inline void memset_io(volatile void __iomem *dst, unsigned c,
           size_t count)
    {
   -       extern void mmioset(void *, unsigned int, size_t);
           mmioset((void __force *)dst, c, count);
    }

The reason they're declared _within_ memset_io() is to prevent people
from using them by hiding their declaration.  Moving them outside is
an open invitation to stupid people starting to use them as an "oh it
must be an official API".

We know this happens, there's been a long history of this kind of stupid
in the ARM community, not only with cache flushing APIs, but also the
DMA APIs.

The way the existing code is written is a completely valid way to hide
declarations from outside the intended caller's scope.

We've been here many times, we've had many people doing this crap, so
I'm now at the point of NAKing changes which result in an increased
visibility to the rest of the kernel of symbols that should not be
used by stupid driver authors.

Now, why do we have these extra functions when they're just aliased to
memset()/memcpy() - to avoid GCC optimising them because it thinks that
they're standard memset()/memcpy().

So overall this gets a NAK from me.

Now, it would have _ALSO_ been nice to have been at least COPIED on the
original set of changes that caused the need for this change.  I wasn't.
So I want to see the original set of changes reverted, because they're
clearly causing breakage.  Let's revert them and then go through the
proper process of maintainer review, rather than bypassing maintainers
and screwing up architectures in the process.  There really is no
excuse for this crap.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Nicholas Piggin]

On Wed, 19 Oct 2016 16:38:14 +0200
Michal Marek <mmarek@suse.com> wrote:

> Dne 18.10.2016 v 03:34 Nicholas Piggin napsal(a):
> > We should probably just bring all these arch patches through the
> > kbuild tree.
> > 
> > I'm sorry for the breakage: I didn't realize it broke the build with
> > some configs, otherwise I would have given Michal a heads up before
> > his pull request, and worked to get this stuff in first.  
> 
> It breaks with some binutils versions only (and only with
> CONFIG_MODVERSIONS=y, of course).

Yeah this seems to be the issue, it apparently slipped past all the
automated builds. It seems like the existing CRC warnings in the tree
only trigger in rare circumstances too, so something could be a bit
fragile there.

Thanks,
Nick

Re: [PATCH] kbuild: provide include/asm/asm-prototypes.h for ARM

[Nicholas Piggin]

On Wed, 19 Oct 2016 16:32:00 +0100
Russell King - ARM Linux <linux@armlinux.org.uk> wrote:

> On Wed, Oct 19, 2016 at 05:02:55PM +0200, Arnd Bergmann wrote:
> > On Wednesday, October 19, 2016 4:52:06 PM CEST Michal Marek wrote:  
> > > Dne 17.10.2016 v 14:26 Arnd Bergmann napsal(a):  
> > > > This adds an asm/asm-prototypes.h header for ARM to fix the
> > > > broken symbol versioning for symbols exported from assembler
> > > > files.
> > > > 
> > > > In addition to the header, we have to do these other small
> > > > changes:
> > > > 
> > > > - move the 'extern' declarations out of memset_io/memcpy_io
> > > >   to make them visible to the symbol version generator
> > > > - move the exports from bitops.h to {change,clear,set,...}bit.S
> > > > - move the exports from csumpartialgeneric.S into the files
> > > >   including it
> > > > 
> > > > I couldn't find the correct prototypes for the compiler builtins,
> > > > so I went with the fake 'void f(void)' prototypes that we had
> > > > before.
> > > > 
> > > > Signed-off-by: Arnd Bergmann <arnd@arndb.de>  
> > > 
> > > Hi Arnd,
> > > 
> > > just to make sure I'm looking at the right code - is this based on the
> > > patch by Nick here: https://patchwork.kernel.org/patch/9377783/?
> > >   
> > 
> > (adding Russell to Cc, I missed him during my earlier mail, which
> > is now archived at https://lkml.org/lkml/2016/10/17/356)  
> 
> I'm not in favour of this.
> 
>    +extern void mmioset(void *, unsigned int, size_t);
>    +extern void mmiocpy(void *, const void *, size_t);
>    +
>     #ifndef __ARMBE__
>     static inline void memset_io(volatile void __iomem *dst, unsigned c,
>            size_t count)
>     {
>    -       extern void mmioset(void *, unsigned int, size_t);
>            mmioset((void __force *)dst, c, count);
>     }
> 
> The reason they're declared _within_ memset_io() is to prevent people
> from using them by hiding their declaration.  Moving them outside is
> an open invitation to stupid people starting to use them as an "oh it
> must be an official API".
> 
> We know this happens, there's been a long history of this kind of stupid
> in the ARM community, not only with cache flushing APIs, but also the
> DMA APIs.
> 
> The way the existing code is written is a completely valid way to hide
> declarations from outside the intended caller's scope.
> 
> We've been here many times, we've had many people doing this crap, so
> I'm now at the point of NAKing changes which result in an increased
> visibility to the rest of the kernel of symbols that should not be
> used by stupid driver authors.
> 
> Now, why do we have these extra functions when they're just aliased to
> memset()/memcpy() - to avoid GCC optimising them because it thinks that
> they're standard memset()/memcpy().
> 
> So overall this gets a NAK from me.

Fair point, what about leaving those as they are, and also adding
them to asm-prototypes.h protected with GENKSYMS ifdef? It's not
beautiful, but still better than armksyms.c before Al's patches (or
at least no worse).


> Now, it would have _ALSO_ been nice to have been at least COPIED on the
> original set of changes that caused the need for this change.  I wasn't.
> So I want to see the original set of changes reverted, because they're
> clearly causing breakage.  Let's revert them and then go through the
> proper process of maintainer review, rather than bypassing maintainers
> and screwing up architectures in the process.  There really is no
> excuse for this crap.

You may have a point about improvement of the process. I wasn't
involved in the original patches, but we did cc linux-arch when the
.S CRC issue became known.

However let's work on the assumption that they won't be reverted at this
stage, and try to come up with something to fix it that you're happy with.

Thanks,
Nick

Re: [PATCH] kbuild: provide include/asm/asm-prototypes.h for ARM

[Geert Uytterhoeven]

On Wed, Oct 19, 2016 at 5:32 PM, Russell King - ARM Linux
<linux@armlinux.org.uk> wrote:
> I'm not in favour of this.
>
>    +extern void mmioset(void *, unsigned int, size_t);
>    +extern void mmiocpy(void *, const void *, size_t);
>    +
>     #ifndef __ARMBE__
>     static inline void memset_io(volatile void __iomem *dst, unsigned c,
>            size_t count)
>     {
>    -       extern void mmioset(void *, unsigned int, size_t);
>            mmioset((void __force *)dst, c, count);
>     }
>
> The reason they're declared _within_ memset_io() is to prevent people
> from using them by hiding their declaration.  Moving them outside is
> an open invitation to stupid people starting to use them as an "oh it
> must be an official API".

If they're not intended for public use, they should (also) be prefixed
with "__" or even "____" to make this clear.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH] kbuild: provide include/asm/asm-prototypes.h for ARM

[Russell King - ARM Linux]

On Thu, Oct 20, 2016 at 09:37:30AM +0200, Geert Uytterhoeven wrote:
> On Wed, Oct 19, 2016 at 5:32 PM, Russell King - ARM Linux
> <linux@armlinux.org.uk> wrote:
> > I'm not in favour of this.
> >
> >    +extern void mmioset(void *, unsigned int, size_t);
> >    +extern void mmiocpy(void *, const void *, size_t);
> >    +
> >     #ifndef __ARMBE__
> >     static inline void memset_io(volatile void __iomem *dst, unsigned c,
> >            size_t count)
> >     {
> >    -       extern void mmioset(void *, unsigned int, size_t);
> >            mmioset((void __force *)dst, c, count);
> >     }
> >
> > The reason they're declared _within_ memset_io() is to prevent people
> > from using them by hiding their declaration.  Moving them outside is
> > an open invitation to stupid people starting to use them as an "oh it
> > must be an official API".
> 
> If they're not intended for public use, they should (also) be prefixed
> with "__" or even "____" to make this clear.

Tried that with the __cpuc_* cache flushing interfaces.  It doesn't
have any effect what so ever.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

Re: [PATCH] kbuild: provide include/asm/asm-prototypes.h for ARM

[Geert Uytterhoeven]

Hi Russell,

On Thu, Oct 20, 2016 at 10:20 AM, Russell King - ARM Linux
<linux@armlinux.org.uk> wrote:
> On Thu, Oct 20, 2016 at 09:37:30AM +0200, Geert Uytterhoeven wrote:
>> On Wed, Oct 19, 2016 at 5:32 PM, Russell King - ARM Linux
>> <linux@armlinux.org.uk> wrote:
>> > I'm not in favour of this.
>> >
>> >    +extern void mmioset(void *, unsigned int, size_t);
>> >    +extern void mmiocpy(void *, const void *, size_t);
>> >    +
>> >     #ifndef __ARMBE__
>> >     static inline void memset_io(volatile void __iomem *dst, unsigned c,
>> >            size_t count)
>> >     {
>> >    -       extern void mmioset(void *, unsigned int, size_t);
>> >            mmioset((void __force *)dst, c, count);
>> >     }
>> >
>> > The reason they're declared _within_ memset_io() is to prevent people
>> > from using them by hiding their declaration.  Moving them outside is
>> > an open invitation to stupid people starting to use them as an "oh it
>> > must be an official API".
>>
>> If they're not intended for public use, they should (also) be prefixed
>> with "__" or even "____" to make this clear.
>
> Tried that with the __cpuc_* cache flushing interfaces.  It doesn't
> have any effect what so ever.

it may not stop the deliberate abuser, but it hints the casual reviewer.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH] kbuild: provide include/asm/asm-prototypes.h for ARM

[Russell King - ARM Linux]

On Thu, Oct 20, 2016 at 03:08:14PM +1100, Nicholas Piggin wrote:
> Fair point, what about leaving those as they are, and also adding
> them to asm-prototypes.h protected with GENKSYMS ifdef? It's not
> beautiful, but still better than armksyms.c before Al's patches (or
> at least no worse).

I disagree (also see below).  The armksyms way was understandable.
The new way... I've no idea yet, because I wasn't even copied on
any of the patches.  I've no idea how the exports are now handled.
I'm in a black hole with respect to that, and that's now a problem.

> > Now, it would have _ALSO_ been nice to have been at least COPIED on the
> > original set of changes that caused the need for this change.  I wasn't.
> > So I want to see the original set of changes reverted, because they're
> > clearly causing breakage.  Let's revert them and then go through the
> > proper process of maintainer review, rather than bypassing maintainers
> > and screwing up architectures in the process.  There really is no
> > excuse for this crap.
> 
> You may have a point about improvement of the process. I wasn't
> involved in the original patches, but we did cc linux-arch when the
> .S CRC issue became known.

Yes, but I'm not on linux-kernel-v2, and I've no desire to end up with
another list I've no hope of keeping up with to my mailbox - I'll just
ignore it.  99% of the messages on it at the time when vger kicked me
off the list was x86 related discussion, and not really cross-arch
issues.  As I say, it just became another linux-kernel list.

> However let's work on the assumption that they won't be reverted at this
> stage, and try to come up with something to fix it that you're happy with.

Well, there's more problems with this new KSYMS approach than just the
CRCs.  It forces a rebuild of the ksyms files every single time, which
then causes a relink of the kernel:

  CHK     include/config/kernel.release
  GEN     ./Makefile
  CHK     include/generated/uapi/linux/version.h
  CHK     include/generated/utsrelease.h
  Using /home/rmk/git/linux-rmk as source for kernel
  CHK     include/generated/timeconst.h
  CHK     include/generated/bounds.h
  CHK     include/generated/asm-offsets.h
  CALL    /home/rmk/git/linux-rmk/scripts/checksyscalls.sh - due to target missing
  CHK     include/generated/compile.h
  EXPORTS arch/arm/lib/lib-ksyms.o - due to lib-ksyms.o not in $(targets)
  LD      arch/arm/lib/built-in.o - due to: arch/arm/lib/lib-ksyms.o
  EXPORTS lib/lib-ksyms.o - due to lib-ksyms.o not in $(targets)
  LD      lib/built-in.o - due to: lib/lib-ksyms.o
  LD      vmlinux.o
  MODPOST vmlinux.o - due to vmlinux.o not in $(targets)
  GEN     .version
  CHK     include/generated/compile.h
  UPD     include/generated/compile.h
  CC      init/version.o - due to: include/generated/compile.h
  LD      init/built-in.o - due to: init/version.o
  KSYM    .tmp_kallsyms1.o
  KSYM    .tmp_kallsyms2.o
  LD      vmlinux
  SORTEX  vmlinux
  SYSMAP  System.map
  OBJCOPY arch/arm/boot/Image - due to: vmlinux
  Building modules, stage 2.
  Kernel: arch/arm/boot/Image is ready
  LZO     arch/arm/boot/compressed/piggy_data - due to: arch/arm/boot/compressed/../Image
  MODPOST 689 modules - due to target is PHONY
  AS      arch/arm/boot/compressed/piggy.o - due to: arch/arm/boot/compressed/piggy_data
  LD      arch/arm/boot/compressed/vmlinux - due to: arch/arm/boot/compressed/piggy.o
  OBJCOPY arch/arm/boot/zImage - due to: arch/arm/boot/compressed/vmlinux
  Kernel: arch/arm/boot/zImage is ready

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

Re: [PATCH] kbuild: provide include/asm/asm-prototypes.h for ARM

[Nicholas Piggin]

On Thu, 20 Oct 2016 14:17:02 +0100
Russell King - ARM Linux <linux@armlinux.org.uk> wrote:

> On Thu, Oct 20, 2016 at 03:08:14PM +1100, Nicholas Piggin wrote:
> > Fair point, what about leaving those as they are, and also adding
> > them to asm-prototypes.h protected with GENKSYMS ifdef? It's not
> > beautiful, but still better than armksyms.c before Al's patches (or
> > at least no worse).  
> 
> I disagree (also see below).  The armksyms way was understandable.
> The new way... I've no idea yet, because I wasn't even copied on

New way is you put the EXPORT_SYMBOL in the .S file, and give it a C
style prototype in asm-prototypes.h, and that's it. The build system
will do the rest. Either way you require some file of C prototypes,
but after Al's patches, at least the EXPORT goes with its definition.

As far as rebuilding too often, that sounds like a bug, more below.


> any of the patches.  I've no idea how the exports are now handled.
> I'm in a black hole with respect to that, and that's now a problem.
> 
> > > Now, it would have _ALSO_ been nice to have been at least COPIED on the
> > > original set of changes that caused the need for this change.  I wasn't.
> > > So I want to see the original set of changes reverted, because they're
> > > clearly causing breakage.  Let's revert them and then go through the
> > > proper process of maintainer review, rather than bypassing maintainers
> > > and screwing up architectures in the process.  There really is no
> > > excuse for this crap.  
> > 
> > You may have a point about improvement of the process. I wasn't
> > involved in the original patches, but we did cc linux-arch when the
> > .S CRC issue became known.  
> 
> Yes, but I'm not on linux-kernel-v2, and I've no desire to end up with
> another list I've no hope of keeping up with to my mailbox - I'll just
> ignore it.  99% of the messages on it at the time when vger kicked me
> off the list was x86 related discussion, and not really cross-arch
> issues.  As I say, it just became another linux-kernel list.

For the patches that touched arm code, I'd agree you should have been cc'ed.

Not to dismiss that concern at all, but for issues of interest to arch code
but not specific to any (such as discovery that the asm exports change would
require this change to restore CRC generation), I was just saying linux-arch
is most appropriate for better or worse. Ccing 30 arch lists is not workable.

And again not to dismiss your concern, I'm just here trying to come up with
a workable fix for the non-revert scenario. Revert is no less valid an
option, it's just not one I'm in favour of myself.


> > However let's work on the assumption that they won't be reverted at this
> > stage, and try to come up with something to fix it that you're happy with.  
> 
> Well, there's more problems with this new KSYMS approach than just the
> CRCs.  It forces a rebuild of the ksyms files every single time, which
> then causes a relink of the kernel:

Good catch, I'm surprised you're the first one who reported it. This patch
seems to do the trick for me:

From: Nicholas Piggin <npiggin@gmail.com>
Date: Fri, 21 Oct 2016 01:13:33 +1100
Subject: [PATCH] kbuild: prevent lib-ksyms.o rebuilds

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>

---
 scripts/Makefile.build | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index de46ab0..e1f25d6 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -430,6 +430,9 @@ cmd_export_list = $(OBJDUMP) -h $< | \
 
 $(obj)/lib-ksyms.o: $(lib-target) FORCE
 	$(call if_changed,export_list)
+
+targets += $(obj)/lib-ksyms.o
+
 endif
 
 #
-- 
2.9.3

Re: [PATCH] kbuild: provide include/asm/asm-prototypes.h for ARM

[Russell King - ARM Linux]

On Fri, Oct 21, 2016 at 01:20:17AM +1100, Nicholas Piggin wrote:
> Good catch, I'm surprised you're the first one who reported it. This patch
> seems to do the trick for me:

And me, thanks, so...

> 
> From: Nicholas Piggin <npiggin@gmail.com>
> Date: Fri, 21 Oct 2016 01:13:33 +1100
> Subject: [PATCH] kbuild: prevent lib-ksyms.o rebuilds
> 
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>

Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Russell King <rmk+kernel@armlinux.org.uk>

> 
> ---
>  scripts/Makefile.build | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/scripts/Makefile.build b/scripts/Makefile.build
> index de46ab0..e1f25d6 100644
> --- a/scripts/Makefile.build
> +++ b/scripts/Makefile.build
> @@ -430,6 +430,9 @@ cmd_export_list = $(OBJDUMP) -h $< | \
>  
>  $(obj)/lib-ksyms.o: $(lib-target) FORCE
>  	$(call if_changed,export_list)
> +
> +targets += $(obj)/lib-ksyms.o
> +
>  endif
>  
>  #

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

Re: [PATCH] kbuild: provide include/asm/asm-prototypes.h for ARM

[Nicholas Piggin]

On Thu, 20 Oct 2016 15:33:27 +0100
Russell King - ARM Linux <linux@armlinux.org.uk> wrote:

> On Fri, Oct 21, 2016 at 01:20:17AM +1100, Nicholas Piggin wrote:
> > Good catch, I'm surprised you're the first one who reported it. This patch
> > seems to do the trick for me:  
> 
> And me, thanks, so...
> 
> > 
> > From: Nicholas Piggin <npiggin@gmail.com>
> > Date: Fri, 21 Oct 2016 01:13:33 +1100
> > Subject: [PATCH] kbuild: prevent lib-ksyms.o rebuilds
> > 
> > Signed-off-by: Nicholas Piggin <npiggin@gmail.com>  
> 
> Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
> Tested-by: Russell King <rmk+kernel@armlinux.org.uk>

Thanks for testing it.

Hopefully if Arnd is able to respin the ARM patch to something a bit more
to your liking that doesn't expose prototypes, and no other problems arise,
we can avoid reverting. You had a poor first impression, but we may yet win
you over.

Re: [PATCH] kbuild: provide include/asm/asm-prototypes.h for ARM

[Michal Marek]

On Thu, Oct 20, 2016 at 03:33:27PM +0100, Russell King - ARM Linux wrote:
> On Fri, Oct 21, 2016 at 01:20:17AM +1100, Nicholas Piggin wrote:
> > Good catch, I'm surprised you're the first one who reported it. This patch
> > seems to do the trick for me:
> 
> And me, thanks, so...
> 
> > 
> > From: Nicholas Piggin <npiggin@gmail.com>
> > Date: Fri, 21 Oct 2016 01:13:33 +1100
> > Subject: [PATCH] kbuild: prevent lib-ksyms.o rebuilds
> > 
> > Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
> 
> Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
> Tested-by: Russell King <rmk+kernel@armlinux.org.uk>

Thanks. Added to kbuild.git#rc-fixes.

Michal

Re: [PATCH] kbuild: provide include/asm/asm-prototypes.h for ARM

[Arnd Bergmann]

On Thursday, October 20, 2016 3:08:14 PM CEST Nicholas Piggin wrote:
> On Wed, 19 Oct 2016 16:32:00 +0100 Russell King - ARM Linux <linux@armlinux.org.uk> wrote:
> > I'm not in favour of this.
> > 
> >    +extern void mmioset(void *, unsigned int, size_t);
> >    +extern void mmiocpy(void *, const void *, size_t);
> >    +
> >     #ifndef __ARMBE__
> >     static inline void memset_io(volatile void __iomem *dst, unsigned c,
> >            size_t count)
> >     {
> >    -       extern void mmioset(void *, unsigned int, size_t);
> >            mmioset((void __force *)dst, c, count);
> >     }
> > 
> > The reason they're declared _within_ memset_io() is to prevent people
> > from using them by hiding their declaration.  Moving them outside is
> > an open invitation to stupid people starting to use them as an "oh it
> > must be an official API".
> > 

I've split out that change from the other ones now, and will follow
up with the patch to address all the other ones first.

> Fair point, what about leaving those as they are, and also adding
> them to asm-prototypes.h protected with GENKSYMS ifdef? It's not
> beautiful, but still better than armksyms.c before Al's patches (or
> at least no worse).

I'm trying this one, and an alternative patch that moves the
export into arch/arm/kernel/io.h. Let's see if we can agree
on one of these.

	Arnd

[PATCH 1/2] kbuild: provide include/asm/asm-prototypes.h for ARM

[Arnd Bergmann]

This adds an asm/asm-prototypes.h header for ARM to fix the
broken symbol versioning for symbols exported from assembler
files.

In addition to the header, we have to do these other small
changes:

- move the exports from bitops.h to {change,clear,set,...}bit.S
- move the exports from csumpartialgeneric.S into the files
  including it

I couldn't find the correct prototypes for the compiler builtins,
so I went with the fake 'void f(void)' prototypes that we had
before.

This leaves the mmioset/mmiocpy function for now, as it's not
obvious how to best handle them.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/arch/arm/include/asm/asm-prototypes.h b/arch/arm/include/asm/asm-prototypes.h
new file mode 100644
index 000000000000..04e5616a7b15
--- /dev/null
+++ b/arch/arm/include/asm/asm-prototypes.h
@@ -0,0 +1,34 @@
+#include <linux/arm-smccc.h>
+#include <linux/bitops.h>
+#include <linux/ftrace.h>
+#include <linux/io.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
+#include <linux/string.h>
+#include <linux/uaccess.h>
+
+#include <asm/checksum.h>
+#include <asm/div64.h>
+#include <asm/memory.h>
+
+extern void __aeabi_idivmod(void);
+extern void __aeabi_idiv(void);
+extern void __aeabi_lasr(void);
+extern void __aeabi_llsl(void);
+extern void __aeabi_llsr(void);
+extern void __aeabi_lmul(void);
+extern void __aeabi_uidivmod(void);
+extern void __aeabi_uidiv(void);
+extern void __aeabi_ulcmp(void);
+
+extern void __ashldi3(void);
+extern void __ashrdi3(void);
+extern void __bswapdi2(void);
+extern void __bswapsi2(void);
+extern void __divsi3(void);
+extern void __do_div64(void);
+extern void __lshrdi3(void);
+extern void __modsi3(void);
+extern void __muldi3(void);
+extern void __ucmpdi2(void);
+extern void __udivsi3(void);
+extern void __umodsi3(void);
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index df06638b327c..afaef2a7faec 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -26,7 +26,6 @@ UNWIND(	.fnstart	)
 	bx	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
-EXPORT_SYMBOL(\name	)
 	.endm
 
 	.macro	testop, name, instr, store
@@ -57,7 +56,6 @@ UNWIND(	.fnstart	)
 2:	bx	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
-EXPORT_SYMBOL(\name	)
 	.endm
 #else
 	.macro	bitop, name, instr
@@ -77,7 +75,6 @@ UNWIND(	.fnstart	)
 	ret	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
-EXPORT_SYMBOL(\name	)
 	.endm
 
 /**
@@ -106,6 +103,5 @@ UNWIND(	.fnstart	)
 	ret	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
-EXPORT_SYMBOL(\name	)
 	.endm
 #endif
diff --git a/arch/arm/lib/changebit.S b/arch/arm/lib/changebit.S
index f4027862172f..005fdd18c509 100644
--- a/arch/arm/lib/changebit.S
+++ b/arch/arm/lib/changebit.S
@@ -13,3 +13,4 @@
                 .text
 
 bitop	_change_bit, eor
+EXPORT_SYMBOL(_change_bit)
diff --git a/arch/arm/lib/clearbit.S b/arch/arm/lib/clearbit.S
index f6b75fb64d30..501eff09968d 100644
--- a/arch/arm/lib/clearbit.S
+++ b/arch/arm/lib/clearbit.S
@@ -13,3 +13,4 @@
                 .text
 
 bitop	_clear_bit, bic
+EXPORT_SYMBOL(_clear_bit)
diff --git a/arch/arm/lib/csumpartialcopy.S b/arch/arm/lib/csumpartialcopy.S
index 9c3383fed129..bdcc2eea4e5c 100644
--- a/arch/arm/lib/csumpartialcopy.S
+++ b/arch/arm/lib/csumpartialcopy.S
@@ -49,6 +49,7 @@
 
 #define FN_ENTRY	ENTRY(csum_partial_copy_nocheck)
 #define FN_EXIT		ENDPROC(csum_partial_copy_nocheck)
-#define FN_EXPORT	EXPORT_SYMBOL(csum_partial_copy_nocheck)
 
 #include "csumpartialcopygeneric.S"
+
+EXPORT_SYMBOL(csum_partial_copy_nocheck)
diff --git a/arch/arm/lib/csumpartialcopygeneric.S b/arch/arm/lib/csumpartialcopygeneric.S
index 8b94d20e51d1..06825566c0f7 100644
--- a/arch/arm/lib/csumpartialcopygeneric.S
+++ b/arch/arm/lib/csumpartialcopygeneric.S
@@ -332,4 +332,3 @@ FN_ENTRY
 		mov	r5, r4, get_byte_1
 		b	.Lexit
 FN_EXIT
-FN_EXPORT
diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S
index 5d495edf3d83..d5522c94f58c 100644
--- a/arch/arm/lib/csumpartialcopyuser.S
+++ b/arch/arm/lib/csumpartialcopyuser.S
@@ -73,9 +73,9 @@
 
 #define FN_ENTRY	ENTRY(csum_partial_copy_from_user)
 #define FN_EXIT		ENDPROC(csum_partial_copy_from_user)
-#define FN_EXPORT	EXPORT_SYMBOL(csum_partial_copy_from_user)
 
 #include "csumpartialcopygeneric.S"
+EXPORT_SYMBOL(csum_partial_copy_from_user)
 
 /*
  * FIXME: minor buglet here
diff --git a/arch/arm/lib/setbit.S b/arch/arm/lib/setbit.S
index 618fedae4b37..d748b8d1326f 100644
--- a/arch/arm/lib/setbit.S
+++ b/arch/arm/lib/setbit.S
@@ -13,3 +13,4 @@
 		.text
 
 bitop	_set_bit, orr
+EXPORT_SYMBOL(_set_bit)
diff --git a/arch/arm/lib/testchangebit.S b/arch/arm/lib/testchangebit.S
index 4becdc3a59cb..4d2dafa9b787 100644
--- a/arch/arm/lib/testchangebit.S
+++ b/arch/arm/lib/testchangebit.S
@@ -13,3 +13,4 @@
                 .text
 
 testop	_test_and_change_bit, eor, str
+EXPORT_SYMBOL(_test_and_change_bit)
diff --git a/arch/arm/lib/testclearbit.S b/arch/arm/lib/testclearbit.S
index 918841dcce7a..fe5cae2e480a 100644
--- a/arch/arm/lib/testclearbit.S
+++ b/arch/arm/lib/testclearbit.S
@@ -13,3 +13,4 @@
                 .text
 
 testop	_test_and_clear_bit, bicne, strne
+EXPORT_SYMBOL(_test_and_clear_bit)
diff --git a/arch/arm/lib/testsetbit.S b/arch/arm/lib/testsetbit.S
index 8d1b2fe9e487..25fed837edb3 100644
--- a/arch/arm/lib/testsetbit.S
+++ b/arch/arm/lib/testsetbit.S
@@ -13,3 +13,4 @@
                 .text
 
 testop	_test_and_set_bit, orreq, streq
+EXPORT_SYMBOL(_test_and_set_bit)

[PATCH 2/2, variant A] ARM: add hidden mmioset/mmiocpy prototypes

[Arnd Bergmann]

The prototypes for mmioset/mmiocpy are intentionally hidden
inside of inline functions, which breaks the EXPORT_SYMBOL
statements when symbol versioning is enabled.

This adds a prototype to asm/asm-prototypes.h but hides it
in an #ifdef so normal drivers don't see it and won't be
able to abuse the interface.

Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/arch/arm/include/asm/asm-prototypes.h b/arch/arm/include/asm/asm-prototypes.h
index 04e5616a7b15..e46b09536b14 100644
--- a/arch/arm/include/asm/asm-prototypes.h
+++ b/arch/arm/include/asm/asm-prototypes.h
@@ -32,3 +32,8 @@ extern void __muldi3(void);
 extern void __ucmpdi2(void);
 extern void __udivsi3(void);
 extern void __umodsi3(void);
+
+#ifdef __GENKSYMS__
+extern void mmioset(void *, unsigned int, size_t);
+extern void mmiocpy(void *, const void *, size_t);
+#endif

[PATCH 2/2, variant B] ARM: move mmiocpy/mmioset exports to io.c

[Arnd Bergmann]

The prototypes for mmioset/mmiocpy are intentionally hidden
inside of inline functions, which breaks the EXPORT_SYMBOL
statements when symbol versioning is enabled.

This moves the two exports from the files that implement the
code into the kernel/io.c file, adding another local declaration
there.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/arch/arm/kernel/io.c b/arch/arm/kernel/io.c
index eedefe050022..c74746997626 100644
--- a/arch/arm/kernel/io.c
+++ b/arch/arm/kernel/io.c
@@ -82,3 +82,10 @@ void _memset_io(volatile void __iomem *dst, int c, size_t count)
 	}
 }
 EXPORT_SYMBOL(_memset_io);
+
+/* can't export them from memcpy.S/memset.S because of hidden declaration */
+void mmioset(void __iomem *addr, unsigned int c, size_t n);
+EXPORT_SYMBOL(mmioset);
+
+void mmiocpy(void *dest, const void __iomem *src, size_t n);
+EXPORT_SYMBOL(mmiocpy);
diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S
index 1be5b6ddf37c..1f822fc52400 100644
--- a/arch/arm/lib/memcpy.S
+++ b/arch/arm/lib/memcpy.S
@@ -70,4 +70,3 @@ ENTRY(memcpy)
 ENDPROC(memcpy)
 ENDPROC(mmiocpy)
 EXPORT_SYMBOL(memcpy)
-EXPORT_SYMBOL(mmiocpy)
diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S
index 7b72044cba62..6f075ca09abc 100644
--- a/arch/arm/lib/memset.S
+++ b/arch/arm/lib/memset.S
@@ -137,4 +137,3 @@ UNWIND( .fnend   )
 ENDPROC(memset)
 ENDPROC(mmioset)
 EXPORT_SYMBOL(memset)
-EXPORT_SYMBOL(mmioset)

Re: [PATCH 1/2] kbuild: provide include/asm/asm-prototypes.h for ARM

[Nicholas Piggin]

On Mon, 24 Oct 2016 17:05:26 +0200
Arnd Bergmann <arnd@arndb.de> wrote:

> This adds an asm/asm-prototypes.h header for ARM to fix the
> broken symbol versioning for symbols exported from assembler
> files.
> 
> In addition to the header, we have to do these other small
> changes:
> 
> - move the exports from bitops.h to {change,clear,set,...}bit.S
> - move the exports from csumpartialgeneric.S into the files
>   including it
> 
> I couldn't find the correct prototypes for the compiler builtins,
> so I went with the fake 'void f(void)' prototypes that we had
> before.
> 
> This leaves the mmioset/mmiocpy function for now, as it's not
> obvious how to best handle them.


This looks nicer. I like variant B because it keeps the GENKSYMS cruft to
a single location, but either one isn't too bad.

I'd like to get moving on this, so let's at least get the generic kbuild
change merged. In the end, the kbuild code does not prevent a maintainer
from putting their EXPORT_SYMBOL in whatever location they like, so there
is no reason not to merge it (certainly there will be archs that do use
it).

Michal, what's your thoughts? If you merge my patch 2/2 and skip 1/2, it
should not give any new build warnings or errors, so then arch patches can
go via arch trees. 1/2 could go in after everyone is up to date.

Thanks,
Nick

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Kalle Valo]

(Adding Thorsten because of a serious regression and Steven because he
tried to fix something in the same commit)

Nicholas Piggin <npiggin@gmail.com> writes:

> On Wed, 19 Oct 2016 16:38:14 +0200
> Michal Marek <mmarek@suse.com> wrote:
>
>> Dne 18.10.2016 v 03:34 Nicholas Piggin napsal(a):
>> > We should probably just bring all these arch patches through the
>> > kbuild tree.
>> > 
>> > I'm sorry for the breakage: I didn't realize it broke the build with
>> > some configs, otherwise I would have given Michal a heads up before
>> > his pull request, and worked to get this stuff in first.  
>> 
>> It breaks with some binutils versions only (and only with
>> CONFIG_MODVERSIONS=y, of course).
>
> Yeah this seems to be the issue, it apparently slipped past all the
> automated builds. It seems like the existing CRC warnings in the tree
> only trigger in rare circumstances too, so something could be a bit
> fragile there.

I upgraded from 4.8 to 4.9-rc2 and noticed that kernel modules fail to
load (log below). After investigating for some time I found this thread
and apparently this is not still fixed, at least not in Linus' tree.

Reverting 784d5699eddc5 fixed the issue for me. As I don't see any fix
available (please correct me if I'm wrong) we should just revert that
commit until it's properly fixed.

Also note that there's a related fix from Steven:

[PATCH] x86: Fix export for mcount and __fentry__
https://marc.info/?l=linux-kernel&m=147733572502413

For compiling the kernel I'm using Ubuntu 12.04:

ii  binutils             2.22-6ubuntu1.4      GNU assembler, linker and binary utilities
ii  gcc                  4:4.6.3-1ubuntu5     GNU C compiler

The kernel is running on a separate machine with Ubuntu 14.04.

[  110.703414] bluetooth: disagrees about version of symbol __get_user_2
[  110.703416] bluetooth: Unknown symbol __get_user_2 (err -22)
[  110.703429] bluetooth: disagrees about version of symbol __put_user_2
[  110.703430] bluetooth: Unknown symbol __put_user_2 (err -22)
[  110.703579] bluetooth: disagrees about version of symbol __put_user_4
[  110.703580] bluetooth: Unknown symbol __put_user_4 (err -22)
[  110.703669] bluetooth: disagrees about version of symbol __put_user_1
[  110.703670] bluetooth: Unknown symbol __put_user_1 (err -22)
[  110.703688] bluetooth: disagrees about version of symbol mcount
[  110.703689] bluetooth: Unknown symbol mcount (err -22)

-- 
Kalle Valo

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Nicholas Piggin]

On Thu, 27 Oct 2016 11:10:03 +0300
Kalle Valo <kvalo@codeaurora.org> wrote:

> (Adding Thorsten because of a serious regression and Steven because he
> tried to fix something in the same commit)
> 
> Nicholas Piggin <npiggin@gmail.com> writes:
> 
> > On Wed, 19 Oct 2016 16:38:14 +0200
> > Michal Marek <mmarek@suse.com> wrote:
> >  
> >> Dne 18.10.2016 v 03:34 Nicholas Piggin napsal(a):  
> >> > We should probably just bring all these arch patches through the
> >> > kbuild tree.
> >> > 
> >> > I'm sorry for the breakage: I didn't realize it broke the build with
> >> > some configs, otherwise I would have given Michal a heads up before
> >> > his pull request, and worked to get this stuff in first.    
> >> 
> >> It breaks with some binutils versions only (and only with
> >> CONFIG_MODVERSIONS=y, of course).  
> >
> > Yeah this seems to be the issue, it apparently slipped past all the
> > automated builds. It seems like the existing CRC warnings in the tree
> > only trigger in rare circumstances too, so something could be a bit
> > fragile there.  
> 
> I upgraded from 4.8 to 4.9-rc2 and noticed that kernel modules fail to
> load (log below). After investigating for some time I found this thread
> and apparently this is not still fixed, at least not in Linus' tree.
> 
> Reverting 784d5699eddc5 fixed the issue for me. As I don't see any fix
> available (please correct me if I'm wrong) we should just revert that
> commit until it's properly fixed.

With these two patches together, does it work for you?

http://marc.info/?l=linux-arch&m=147653546809512&w=2
http://marc.info/?l=linux-kernel&m=147669851906489&w=2

It would be helpful if you could test and let us know, because there seems
to be a very tiny number of configs and toolchains that causes problems.

> 
> Also note that there's a related fix from Steven:
> 
> [PATCH] x86: Fix export for mcount and __fentry__
> https://marc.info/?l=linux-kernel&m=147733572502413
> 
> For compiling the kernel I'm using Ubuntu 12.04:
> 
> ii  binutils             2.22-6ubuntu1.4      GNU assembler, linker and binary utilities
> ii  gcc                  4:4.6.3-1ubuntu5     GNU C compiler
> 
> The kernel is running on a separate machine with Ubuntu 14.04.
> 
> [  110.703414] bluetooth: disagrees about version of symbol __get_user_2
> [  110.703416] bluetooth: Unknown symbol __get_user_2 (err -22)
> [  110.703429] bluetooth: disagrees about version of symbol __put_user_2
> [  110.703430] bluetooth: Unknown symbol __put_user_2 (err -22)
> [  110.703579] bluetooth: disagrees about version of symbol __put_user_4
> [  110.703580] bluetooth: Unknown symbol __put_user_4 (err -22)
> [  110.703669] bluetooth: disagrees about version of symbol __put_user_1
> [  110.703670] bluetooth: Unknown symbol __put_user_1 (err -22)
> [  110.703688] bluetooth: disagrees about version of symbol mcount
> [  110.703689] bluetooth: Unknown symbol mcount (err -22)
> 

I haven't seen that one before. Did you definitely make and install new
modules?

Thanks,
Nick

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Kalle Valo]

Nicholas Piggin <npiggin@gmail.com> writes:

> On Thu, 27 Oct 2016 11:10:03 +0300
> Kalle Valo <kvalo@codeaurora.org> wrote:
>
>> (Adding Thorsten because of a serious regression and Steven because he
>> tried to fix something in the same commit)
>> 
>> Nicholas Piggin <npiggin@gmail.com> writes:
>> 
>> > On Wed, 19 Oct 2016 16:38:14 +0200
>> > Michal Marek <mmarek@suse.com> wrote:
>> >  
>> >> Dne 18.10.2016 v 03:34 Nicholas Piggin napsal(a):  
>> >> > We should probably just bring all these arch patches through the
>> >> > kbuild tree.
>> >> > 
>> >> > I'm sorry for the breakage: I didn't realize it broke the build with
>> >> > some configs, otherwise I would have given Michal a heads up before
>> >> > his pull request, and worked to get this stuff in first.    
>> >> 
>> >> It breaks with some binutils versions only (and only with
>> >> CONFIG_MODVERSIONS=y, of course).  
>> >
>> > Yeah this seems to be the issue, it apparently slipped past all the
>> > automated builds. It seems like the existing CRC warnings in the tree
>> > only trigger in rare circumstances too, so something could be a bit
>> > fragile there.  
>> 
>> I upgraded from 4.8 to 4.9-rc2 and noticed that kernel modules fail to
>> load (log below). After investigating for some time I found this thread
>> and apparently this is not still fixed, at least not in Linus' tree.
>> 
>> Reverting 784d5699eddc5 fixed the issue for me. As I don't see any fix
>> available (please correct me if I'm wrong) we should just revert that
>> commit until it's properly fixed.
>
> With these two patches together, does it work for you?
>
> http://marc.info/?l=linux-arch&m=147653546809512&w=2
> http://marc.info/?l=linux-kernel&m=147669851906489&w=2
>
> It would be helpful if you could test and let us know, because there seems
> to be a very tiny number of configs and toolchains that causes
> problems.

With these two patches (on top of ath-201610251249 from ath.git, in
practice 4.9-rc2 + latest wireless patches) module loading works again.
If you want you can add my Tested-by:

Tested-by: Kalle Valo <kvalo@codeaurora.org>

Can we get these patches to Linus' tree soon? It's annoying to revert
784d5699eddc5 everytime I update my tree.

>> Also note that there's a related fix from Steven:
>> 
>> [PATCH] x86: Fix export for mcount and __fentry__
>> https://marc.info/?l=linux-kernel&m=147733572502413
>> 
>> For compiling the kernel I'm using Ubuntu 12.04:
>> 
>> ii  binutils             2.22-6ubuntu1.4      GNU assembler, linker and binary utilities
>> ii  gcc                  4:4.6.3-1ubuntu5     GNU C compiler
>> 
>> The kernel is running on a separate machine with Ubuntu 14.04.
>> 
>> [  110.703414] bluetooth: disagrees about version of symbol __get_user_2
>> [  110.703416] bluetooth: Unknown symbol __get_user_2 (err -22)
>> [  110.703429] bluetooth: disagrees about version of symbol __put_user_2
>> [  110.703430] bluetooth: Unknown symbol __put_user_2 (err -22)
>> [  110.703579] bluetooth: disagrees about version of symbol __put_user_4
>> [  110.703580] bluetooth: Unknown symbol __put_user_4 (err -22)
>> [  110.703669] bluetooth: disagrees about version of symbol __put_user_1
>> [  110.703670] bluetooth: Unknown symbol __put_user_1 (err -22)
>> [  110.703688] bluetooth: disagrees about version of symbol mcount
>> [  110.703689] bluetooth: Unknown symbol mcount (err -22)
>> 
>
> I haven't seen that one before. Did you definitely make and install new
> modules?

I'm pretty sure modules are correctly installed as I have used the same
procedure for years: on my workstation I do 'make bindeb-pkg', copy the
.deb to the test laptop and install the deb there. Also once I revert
784d5699eddc5 it starts immeadiately working.

-- 
Kalle Valo

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Nicholas Piggin]

On Thu, 27 Oct 2016 16:14:28 +0300
Kalle Valo <kvalo@codeaurora.org> wrote:

> Nicholas Piggin <npiggin@gmail.com> writes:
> 
> > On Thu, 27 Oct 2016 11:10:03 +0300
> > Kalle Valo <kvalo@codeaurora.org> wrote:
> >  
> >> (Adding Thorsten because of a serious regression and Steven because he
> >> tried to fix something in the same commit)
> >> 
> >> Nicholas Piggin <npiggin@gmail.com> writes:
> >>   
> >> > On Wed, 19 Oct 2016 16:38:14 +0200
> >> > Michal Marek <mmarek@suse.com> wrote:
> >> >    
> >> >> Dne 18.10.2016 v 03:34 Nicholas Piggin napsal(a):    
> >> >> > We should probably just bring all these arch patches through the
> >> >> > kbuild tree.
> >> >> > 
> >> >> > I'm sorry for the breakage: I didn't realize it broke the build with
> >> >> > some configs, otherwise I would have given Michal a heads up before
> >> >> > his pull request, and worked to get this stuff in first.      
> >> >> 
> >> >> It breaks with some binutils versions only (and only with
> >> >> CONFIG_MODVERSIONS=y, of course).    
> >> >
> >> > Yeah this seems to be the issue, it apparently slipped past all the
> >> > automated builds. It seems like the existing CRC warnings in the tree
> >> > only trigger in rare circumstances too, so something could be a bit
> >> > fragile there.    
> >> 
> >> I upgraded from 4.8 to 4.9-rc2 and noticed that kernel modules fail to
> >> load (log below). After investigating for some time I found this thread
> >> and apparently this is not still fixed, at least not in Linus' tree.
> >> 
> >> Reverting 784d5699eddc5 fixed the issue for me. As I don't see any fix
> >> available (please correct me if I'm wrong) we should just revert that
> >> commit until it's properly fixed.  
> >
> > With these two patches together, does it work for you?
> >
> > http://marc.info/?l=linux-arch&m=147653546809512&w=2
> > http://marc.info/?l=linux-kernel&m=147669851906489&w=2
> >
> > It would be helpful if you could test and let us know, because there seems
> > to be a very tiny number of configs and toolchains that causes
> > problems.  
> 
> With these two patches (on top of ath-201610251249 from ath.git, in
> practice 4.9-rc2 + latest wireless patches) module loading works again.
> If you want you can add my Tested-by:
> 
> Tested-by: Kalle Valo <kvalo@codeaurora.org>

Great, thanks for testing it.

> Can we get these patches to Linus' tree soon? It's annoying to revert
> 784d5699eddc5 everytime I update my tree.

Yes I think it's about ready to merge. Michal is returning from vacation
next week so we should get some progress soon.

> >> Also note that there's a related fix from Steven:
> >> 
> >> [PATCH] x86: Fix export for mcount and __fentry__
> >> https://marc.info/?l=linux-kernel&m=147733572502413
> >> 
> >> For compiling the kernel I'm using Ubuntu 12.04:
> >> 
> >> ii  binutils             2.22-6ubuntu1.4      GNU assembler, linker and binary utilities
> >> ii  gcc                  4:4.6.3-1ubuntu5     GNU C compiler
> >> 
> >> The kernel is running on a separate machine with Ubuntu 14.04.
> >> 
> >> [  110.703414] bluetooth: disagrees about version of symbol __get_user_2
> >> [  110.703416] bluetooth: Unknown symbol __get_user_2 (err -22)
> >> [  110.703429] bluetooth: disagrees about version of symbol __put_user_2
> >> [  110.703430] bluetooth: Unknown symbol __put_user_2 (err -22)
> >> [  110.703579] bluetooth: disagrees about version of symbol __put_user_4
> >> [  110.703580] bluetooth: Unknown symbol __put_user_4 (err -22)
> >> [  110.703669] bluetooth: disagrees about version of symbol __put_user_1
> >> [  110.703670] bluetooth: Unknown symbol __put_user_1 (err -22)
> >> [  110.703688] bluetooth: disagrees about version of symbol mcount
> >> [  110.703689] bluetooth: Unknown symbol mcount (err -22)
> >>   
> >
> > I haven't seen that one before. Did you definitely make and install new
> > modules?  
> 
> I'm pretty sure modules are correctly installed as I have used the same
> procedure for years: on my workstation I do 'make bindeb-pkg', copy the
> .deb to the test laptop and install the deb there. Also once I revert
> 784d5699eddc5 it starts immeadiately working.
> 

Sure, I was just checking because I've seen several types of failure but
not this one before. Thanks for reporting and testing.

Thanks,
Nick

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Thorsten Leemhuis]

On 27.10.2016 10:10, Kalle Valo wrote:
> (Adding Thorsten because of a serious regression and Steven because he
> tried to fix something in the same commit)

Many thx.

I added this report to the list of regressions for Linux 4.9. I'll
watch this thread for further updates on this issue to document progress
in my weekly reports. Please let me know via regressions@leemhuis.info
in case the discussion moves to a different place (bugzilla or another
mail thread for example).

Current status (afaics): Fix available, waiting for Michal to get back
from vacation.

tia! Ciao, Thorsten

> Nicholas Piggin <npiggin@gmail.com> writes:
> 
>> On Wed, 19 Oct 2016 16:38:14 +0200
>> Michal Marek <mmarek@suse.com> wrote:
>>
>>> Dne 18.10.2016 v 03:34 Nicholas Piggin napsal(a):
>>>> We should probably just bring all these arch patches through the
>>>> kbuild tree.
>>>>
>>>> I'm sorry for the breakage: I didn't realize it broke the build with
>>>> some configs, otherwise I would have given Michal a heads up before
>>>> his pull request, and worked to get this stuff in first.  
>>>
>>> It breaks with some binutils versions only (and only with
>>> CONFIG_MODVERSIONS=y, of course).
>>
>> Yeah this seems to be the issue, it apparently slipped past all the
>> automated builds. It seems like the existing CRC warnings in the tree
>> only trigger in rare circumstances too, so something could be a bit
>> fragile there.
> 
> I upgraded from 4.8 to 4.9-rc2 and noticed that kernel modules fail to
> load (log below). After investigating for some time I found this thread
> and apparently this is not still fixed, at least not in Linus' tree.
> 
> Reverting 784d5699eddc5 fixed the issue for me. As I don't see any fix
> available (please correct me if I'm wrong) we should just revert that
> commit until it's properly fixed.
> 
> Also note that there's a related fix from Steven:
> 
> [PATCH] x86: Fix export for mcount and __fentry__
> https://marc.info/?l=linux-kernel&m=147733572502413
> 
> For compiling the kernel I'm using Ubuntu 12.04:
> 
> ii  binutils             2.22-6ubuntu1.4      GNU assembler, linker and binary utilities
> ii  gcc                  4:4.6.3-1ubuntu5     GNU C compiler
> 
> The kernel is running on a separate machine with Ubuntu 14.04.
> 
> [  110.703414] bluetooth: disagrees about version of symbol __get_user_2
> [  110.703416] bluetooth: Unknown symbol __get_user_2 (err -22)
> [  110.703429] bluetooth: disagrees about version of symbol __put_user_2
> [  110.703430] bluetooth: Unknown symbol __put_user_2 (err -22)
> [  110.703579] bluetooth: disagrees about version of symbol __put_user_4
> [  110.703580] bluetooth: Unknown symbol __put_user_4 (err -22)
> [  110.703669] bluetooth: disagrees about version of symbol __put_user_1
> [  110.703670] bluetooth: Unknown symbol __put_user_1 (err -22)
> [  110.703688] bluetooth: disagrees about version of symbol mcount
> [  110.703689] bluetooth: Unknown symbol mcount (err -22)
> 

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Michal Marek]

On 2016-10-18 03:34, Nicholas Piggin wrote:
> Hi Adam,
> 
> Thanks, this is looking good. powerpc will be able to use the generic
> header.
> 
> On Tue, 18 Oct 2016 02:16:26 +0200
> Adam Borowski <kilobyte@angband.pl> wrote:
> 
>> On Mon, Oct 17, 2016 at 02:22:34PM +0200, Mathieu OTHACEHE wrote:
>>>> +#include <asm/uaccess.h>
>>>> +#include <asm/uaccess.h>  
>>>
>>> Included twice.  
>>
>> D'oh!
>>
>>>> +#include <asm/string.h>
>>>> +#include <asm/page.h>
>>>> +#include <asm/checksum.h>
>>>> +
>>>> +#include <asm-generic/asm-prototypes.h>
>>>> +
>>>> +#include <asm/page.h>
>>>> +#include <asm/pgtable.h>
>>>> +#include <asm/special_insns.h>
>>>> +#include <asm/preempt.h>  
>>>
>>> No <asm/arch_hweight.h> for __sw_hweight32 and __sw_hweight64 ?   
>>
>> diff --git a/include/asm-generic/asm-prototypes.h b/include/asm-generic/asm-prototypes.h
>> new file mode 100644
>> index 0000000..df13637
>> --- /dev/null
>> +++ b/include/asm-generic/asm-prototypes.h
>> @@ -0,0 +1,7 @@
>> +#include <linux/bitops.h>
>>
>> ... which has these.
>>
>> Alexey Dobriyan <adobriyan@gmail.com> wrote:
>> } bitops.h is wrong header as well.
>> } Why do you need bitops for bunch of function prototypes?
>>
>> Unless you guys prefer using low-level headers only, that is.
> 
> Well you can't use asm/arch_hweight.h in a generic header of course.
> I would suggest just including linux/ variants where practical for
> the asm-generic/asm-prototypes.h header.
> 
> We should probably just bring all these arch patches through the
> kbuild tree.

Adam,

are you submitting a new version of your x86 asm-prototypes.h patch?

Thanks,
Michal

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Adam Borowski]

On Tue, Nov 01, 2016 at 04:48:48PM +0100, Michal Marek wrote:
> > Adam Borowski <kilobyte@angband.pl> wrote:
> > 
> >> On Mon, Oct 17, 2016 at 02:22:34PM +0200, Mathieu OTHACEHE wrote:
> >>>> +#include <asm/uaccess.h>
> >>>> +#include <asm/uaccess.h>  
> >>>
> >>> Included twice.  
> >>
> >> D'oh!

This appears to be the only thing to fix, right?

> >>>> +#include <asm/string.h>
> >>>> +#include <asm/page.h>
> >>>> +#include <asm/checksum.h>
> >>>> +
> >>>> +#include <asm-generic/asm-prototypes.h>
> >>>> +
> >>>> +#include <asm/page.h>
> >>>> +#include <asm/pgtable.h>
> >>>> +#include <asm/special_insns.h>
> >>>> +#include <asm/preempt.h>  
> >>>
> >>> No <asm/arch_hweight.h> for __sw_hweight32 and __sw_hweight64 ?   
> >>
> >> diff --git a/include/asm-generic/asm-prototypes.h b/include/asm-generic/asm-prototypes.h
> >> new file mode 100644
> >> index 0000000..df13637
> >> --- /dev/null
> >> +++ b/include/asm-generic/asm-prototypes.h
> >> @@ -0,0 +1,7 @@
> >> +#include <linux/bitops.h>
> >>
> >> ... which has these.
> >>
> >> Alexey Dobriyan <adobriyan@gmail.com> wrote:
> >> } bitops.h is wrong header as well.
> >> } Why do you need bitops for bunch of function prototypes?
> >>
> >> Unless you guys prefer using low-level headers only, that is.
> > 
> > Well you can't use asm/arch_hweight.h in a generic header of course.
> > I would suggest just including linux/ variants where practical for
> > the asm-generic/asm-prototypes.h header.
> > 
> > We should probably just bring all these arch patches through the
> > kbuild tree.

I believe inclusion of <linux/bitops.h> is the right thing to do, but if
not, the patch would also need:

extern unsigned int __sw_hweight8(unsigned int w);
extern unsigned int __sw_hweight16(unsigned int w);
extern unsigned int __sw_hweight32(unsigned int w);
extern unsigned long __sw_hweight64(__u64 w);


There's also the issue of mcount/__fentry__, but that's apparently already
dealt with in 5de0a8c, already in mainline.

> are you submitting a new version of your x86 asm-prototypes.h patch?

The update is trivial, but yeah, I can resubmit.  If I'm wrong about where
__sw_hweight{8,16,32,64} should come from, please say so.


Meow!
-- 
A MAP07 (Dead Simple) raspberry tincture recipe: 0.5l 95% alcohol, 1kg
raspberries, 0.4kg sugar; put into a big jar for 1 month.  Filter out and
throw away the fruits (can dump them into a cake, etc), let the drink age
at least 3-6 months.

[PATCH] kbuild: provide include/asm/asm-prototypes.h for x86

[Adam Borowski]

Nicholas Piggin wrote:
> Architectures will need to have an include/asm/asm-prototypes.h that
> defines or #include<>s C-style prototypes for exported asm functions.
> We can do an asm-generic version for the common ones like memset so
> there's not a lot of pointless duplication there.

Signed-off-by: Adam Borowski <kilobyte@angband.pl>
---
 arch/x86/include/asm/asm-prototypes.h | 12 ++++++++++++
 include/asm-generic/asm-prototypes.h  |  7 +++++++
 2 files changed, 19 insertions(+)
 create mode 100644 arch/x86/include/asm/asm-prototypes.h
 create mode 100644 include/asm-generic/asm-prototypes.h

diff --git a/arch/x86/include/asm/asm-prototypes.h b/arch/x86/include/asm/asm-prototypes.h
new file mode 100644
index 0000000..ae87224
--- /dev/null
+++ b/arch/x86/include/asm/asm-prototypes.h
@@ -0,0 +1,12 @@
+#include <asm/ftrace.h>
+#include <asm/uaccess.h>
+#include <asm/string.h>
+#include <asm/page.h>
+#include <asm/checksum.h>
+
+#include <asm-generic/asm-prototypes.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/special_insns.h>
+#include <asm/preempt.h>
diff --git a/include/asm-generic/asm-prototypes.h b/include/asm-generic/asm-prototypes.h
new file mode 100644
index 0000000..df13637
--- /dev/null
+++ b/include/asm-generic/asm-prototypes.h
@@ -0,0 +1,7 @@
+#include <linux/bitops.h>
+extern void *__memset(void *, int, __kernel_size_t);
+extern void *__memcpy(void *, const void *, __kernel_size_t);
+extern void *__memmove(void *, const void *, __kernel_size_t);
+extern void *memset(void *, int, __kernel_size_t);
+extern void *memcpy(void *, const void *, __kernel_size_t);
+extern void *memmove(void *, const void *, __kernel_size_t);
-- 
2.10.2

Re: [PATCH 1/2] kbuild: provide include/asm/asm-prototypes.h for ARM

[Russell King - ARM Linux]

On Tue, Oct 25, 2016 at 07:32:00PM +1100, Nicholas Piggin wrote:
> On Mon, 24 Oct 2016 17:05:26 +0200
> Arnd Bergmann <arnd@arndb.de> wrote:
> 
> > This adds an asm/asm-prototypes.h header for ARM to fix the
> > broken symbol versioning for symbols exported from assembler
> > files.
> > 
> > In addition to the header, we have to do these other small
> > changes:
> > 
> > - move the exports from bitops.h to {change,clear,set,...}bit.S
> > - move the exports from csumpartialgeneric.S into the files
> >   including it
> > 
> > I couldn't find the correct prototypes for the compiler builtins,
> > so I went with the fake 'void f(void)' prototypes that we had
> > before.
> > 
> > This leaves the mmioset/mmiocpy function for now, as it's not
> > obvious how to best handle them.
> 
> 
> This looks nicer. I like variant B because it keeps the GENKSYMS cruft to
> a single location, but either one isn't too bad.
> 
> I'd like to get moving on this, so let's at least get the generic kbuild
> change merged. In the end, the kbuild code does not prevent a maintainer
> from putting their EXPORT_SYMBOL in whatever location they like, so there
> is no reason not to merge it (certainly there will be archs that do use
> it).
> 
> Michal, what's your thoughts? If you merge my patch 2/2 and skip 1/2, it
> should not give any new build warnings or errors, so then arch patches can
> go via arch trees. 1/2 could go in after everyone is up to date.

So what's the conclusion on this?  I've just had a failure due to
CONFIG_TRIM_UNUSED_KSYMS reported on ARM, and it looks like (at
least some of) patch 1 could resolve it.

Do we need to split patch 1?

Has any of these patches been committed yet?

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

Re: [PATCH 1/2] kbuild: provide include/asm/asm-prototypes.h for ARM

[Linus Torvalds]

On Sun, Nov 20, 2016 at 5:21 AM, Russell King - ARM Linux
<linux@armlinux.org.uk> wrote:
> On Tue, Oct 25, 2016 at 07:32:00PM +1100, Nicholas Piggin wrote:
>>
>> Michal, what's your thoughts? If you merge my patch 2/2 and skip 1/2, it
>> should not give any new build warnings or errors, so then arch patches can
>> go via arch trees. 1/2 could go in after everyone is up to date.
>
> So what's the conclusion on this?  I've just had a failure due to
> CONFIG_TRIM_UNUSED_KSYMS reported on ARM, and it looks like (at
> least some of) patch 1 could resolve it.

Hmm. I've got

  cc6acc11cad1 kbuild: be more careful about matching preprocessed asm
___EXPORT_SYMBOL
  4efca4ed05cb kbuild: modversions for EXPORT_SYMBOL() for asm

in my tree. Is that sufficient, or do we still have issues?

             Linus

Re: [PATCH 1/2] kbuild: provide include/asm/asm-prototypes.h for ARM

[Russell King - ARM Linux]

On Sun, Nov 20, 2016 at 10:32:50AM -0800, Linus Torvalds wrote:
> On Sun, Nov 20, 2016 at 5:21 AM, Russell King - ARM Linux
> <linux@armlinux.org.uk> wrote:
> > On Tue, Oct 25, 2016 at 07:32:00PM +1100, Nicholas Piggin wrote:
> >>
> >> Michal, what's your thoughts? If you merge my patch 2/2 and skip 1/2, it
> >> should not give any new build warnings or errors, so then arch patches can
> >> go via arch trees. 1/2 could go in after everyone is up to date.
> >
> > So what's the conclusion on this?  I've just had a failure due to
> > CONFIG_TRIM_UNUSED_KSYMS reported on ARM, and it looks like (at
> > least some of) patch 1 could resolve it.
> 
> Hmm. I've got
> 
>   cc6acc11cad1 kbuild: be more careful about matching preprocessed asm
> ___EXPORT_SYMBOL
>   4efca4ed05cb kbuild: modversions for EXPORT_SYMBOL() for asm
> 
> in my tree. Is that sufficient, or do we still have issues?

Hmm, those seem to have gone in during the last week, so I haven't
tested it yet (build running, but it'll take a while).  However, I
don't think they'll solve _this_ problem.

Some of the issue here is that we use a mixture of assembly macros
and preprocessor for the ARM bitops - the ARM bitops are created
with an assembly macro which contains some pre-processor expanded
macros (eg, EXPORT_SYMBOL()).

This means that the actual symbol being exported is not known to
the preprocessor, so doing the "__is_defined(__KSYM_##sym)" inside
"EXPORT_SYMBOL(\name)" becomes "__is_defined(__KSYM_\name)" to the
preprocessor.  As "__KSYM_\name" is never defined, it always comes
out as zero, hence we always use __cond_export_sym_0, which omits
the symbol export from the assembly macro definition:

 .macro bitop, name, instr
.globl \name ; .align 0 ; \name:

...

.type \name, %function; .size \name, .-\name

 .endm

In other words, using preprocessor macros inside an assembly macro
may not work as expected, and now leads to config-specific failures.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

Re: [PATCH 1/2] kbuild: provide include/asm/asm-prototypes.h for ARM

[Nicholas Piggin]

On Sun, 20 Nov 2016 19:12:57 +0000
Russell King - ARM Linux <linux@armlinux.org.uk> wrote:

> On Sun, Nov 20, 2016 at 10:32:50AM -0800, Linus Torvalds wrote:
> > On Sun, Nov 20, 2016 at 5:21 AM, Russell King - ARM Linux
> > <linux@armlinux.org.uk> wrote:  
> > > On Tue, Oct 25, 2016 at 07:32:00PM +1100, Nicholas Piggin wrote:  
> > >>
> > >> Michal, what's your thoughts? If you merge my patch 2/2 and skip 1/2, it
> > >> should not give any new build warnings or errors, so then arch patches can
> > >> go via arch trees. 1/2 could go in after everyone is up to date.  
> > >
> > > So what's the conclusion on this?  I've just had a failure due to
> > > CONFIG_TRIM_UNUSED_KSYMS reported on ARM, and it looks like (at
> > > least some of) patch 1 could resolve it.  
> > 
> > Hmm. I've got
> > 
> >   cc6acc11cad1 kbuild: be more careful about matching preprocessed asm
> > ___EXPORT_SYMBOL
> >   4efca4ed05cb kbuild: modversions for EXPORT_SYMBOL() for asm
> > 
> > in my tree. Is that sufficient, or do we still have issues?  
> 
> Hmm, those seem to have gone in during the last week, so I haven't
> tested it yet (build running, but it'll take a while).  However, I
> don't think they'll solve _this_ problem.
> 
> Some of the issue here is that we use a mixture of assembly macros
> and preprocessor for the ARM bitops - the ARM bitops are created
> with an assembly macro which contains some pre-processor expanded
> macros (eg, EXPORT_SYMBOL()).
> 
> This means that the actual symbol being exported is not known to
> the preprocessor, so doing the "__is_defined(__KSYM_##sym)" inside
> "EXPORT_SYMBOL(\name)" becomes "__is_defined(__KSYM_\name)" to the
> preprocessor.  As "__KSYM_\name" is never defined, it always comes
> out as zero, hence we always use __cond_export_sym_0, which omits
> the symbol export from the assembly macro definition:
> 
>  .macro bitop, name, instr
> .globl \name ; .align 0 ; \name:
> 
> ...
> 
> .type \name, %function; .size \name, .-\name
> 
>  .endm
> 
> In other words, using preprocessor macros inside an assembly macro
> may not work as expected, and now leads to config-specific failures.
> 

Yes, that's a limitation. cpp expansion we can handle, but not gas macros.
You will need Arnd's patches for ARM.

http://marc.info/?l=linux-kbuild&m=147732160529499&w=2

If that doesn't fix it for you, send me your .config offline and I'll set
up a cross compile to work on it.

Again, any arch always has the option of going back to doing asm exports
in the old style of putting them into a .c file, but hopefully you'll find
Arnd's reworked patches to be something you're willing to merge.

Thanks,
Nick

Re: [1/2] kbuild: provide include/asm/asm-prototypes.h for ARM

[Uwe Kleine-König]

[-- Attachment #1: Type: text/plain, Size: 1616 bytes --]

Hello,

On Mon, Oct 24, 2016 at 05:05:26PM +0200, Arnd Bergmann wrote:
> This adds an asm/asm-prototypes.h header for ARM to fix the
> broken symbol versioning for symbols exported from assembler
> files.
> 
> In addition to the header, we have to do these other small
> changes:
> 
> - move the exports from bitops.h to {change,clear,set,...}bit.S
> - move the exports from csumpartialgeneric.S into the files
>   including it
> 
> I couldn't find the correct prototypes for the compiler builtins,
> so I went with the fake 'void f(void)' prototypes that we had
> before.
> 
> This leaves the mmioset/mmiocpy function for now, as it's not
> obvious how to best handle them.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

In my test builds of 4.9-rc5 plus

	4efca4ed05cb ("kbuild: modversions for EXPORT_SYMBOL() for asm")
	cc6acc11cad1 ("kbuild: be more careful about matching preprocessed asm ___EXPORT_SYMBOL")

(which are in -rc6) I got many warnings à la:

	WARNING: "memset" [drivers/media/usb/airspy/airspy.ko] has no CRC!

and booting the resulting kernel failed with messages of the type:

	[    3.024126] usbcore: no symbol version for __memzero
	[    3.029107] usbcore: Unknown symbol __memzero (err -22)

so hardly any module could be loaded. modprobe -f works however, but
that's not what my initramfs does.

With this patch and https://patchwork.kernel.org/patch/9392291/ ("ARM:
move mmiocpy/mmioset exports to io.c") I could compile a kernel without
CRC warnings and it boots fine. So it would be great to get these two
patches into 4.9.

Thanks
Uwe

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 455 bytes --]

Bug#844530: [1/2] kbuild: provide include/asm/asm-prototypes.h for ARM

[Uwe Kleine-König]

[-- Attachment #1: Type: text/plain, Size: 1616 bytes --]

Hello,

On Mon, Oct 24, 2016 at 05:05:26PM +0200, Arnd Bergmann wrote:
> This adds an asm/asm-prototypes.h header for ARM to fix the
> broken symbol versioning for symbols exported from assembler
> files.
> 
> In addition to the header, we have to do these other small
> changes:
> 
> - move the exports from bitops.h to {change,clear,set,...}bit.S
> - move the exports from csumpartialgeneric.S into the files
>   including it
> 
> I couldn't find the correct prototypes for the compiler builtins,
> so I went with the fake 'void f(void)' prototypes that we had
> before.
> 
> This leaves the mmioset/mmiocpy function for now, as it's not
> obvious how to best handle them.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

In my test builds of 4.9-rc5 plus

	4efca4ed05cb ("kbuild: modversions for EXPORT_SYMBOL() for asm")
	cc6acc11cad1 ("kbuild: be more careful about matching preprocessed asm ___EXPORT_SYMBOL")

(which are in -rc6) I got many warnings à la:

	WARNING: "memset" [drivers/media/usb/airspy/airspy.ko] has no CRC!

and booting the resulting kernel failed with messages of the type:

	[    3.024126] usbcore: no symbol version for __memzero
	[    3.029107] usbcore: Unknown symbol __memzero (err -22)

so hardly any module could be loaded. modprobe -f works however, but
that's not what my initramfs does.

With this patch and https://patchwork.kernel.org/patch/9392291/ ("ARM:
move mmiocpy/mmioset exports to io.c") I could compile a kernel without
CRC warnings and it boots fine. So it would be great to get these two
patches into 4.9.

Thanks
Uwe

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 455 bytes --]

Re: [1/2] kbuild: provide include/asm/asm-prototypes.h for ARM

[Russell King - ARM Linux]

On Mon, Nov 21, 2016 at 07:46:44PM +0100, Uwe Kleine-König wrote:
> Hello,
> 
> On Mon, Oct 24, 2016 at 05:05:26PM +0200, Arnd Bergmann wrote:
> > This adds an asm/asm-prototypes.h header for ARM to fix the
> > broken symbol versioning for symbols exported from assembler
> > files.
> > 
> > In addition to the header, we have to do these other small
> > changes:
> > 
> > - move the exports from bitops.h to {change,clear,set,...}bit.S
> > - move the exports from csumpartialgeneric.S into the files
> >   including it
> > 
> > I couldn't find the correct prototypes for the compiler builtins,
> > so I went with the fake 'void f(void)' prototypes that we had
> > before.
> > 
> > This leaves the mmioset/mmiocpy function for now, as it's not
> > obvious how to best handle them.
> > 
> > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> 
> In my test builds of 4.9-rc5 plus
> 
> 	4efca4ed05cb ("kbuild: modversions for EXPORT_SYMBOL() for asm")
> 	cc6acc11cad1 ("kbuild: be more careful about matching preprocessed asm ___EXPORT_SYMBOL")
> 
> (which are in -rc6) I got many warnings à la:
> 
> 	WARNING: "memset" [drivers/media/usb/airspy/airspy.ko] has no CRC!
> 
> and booting the resulting kernel failed with messages of the type:
> 
> 	[    3.024126] usbcore: no symbol version for __memzero
> 	[    3.029107] usbcore: Unknown symbol __memzero (err -22)
> 
> so hardly any module could be loaded. modprobe -f works however, but
> that's not what my initramfs does.
> 
> With this patch and https://patchwork.kernel.org/patch/9392291/ ("ARM:
> move mmiocpy/mmioset exports to io.c") I could compile a kernel without
> CRC warnings and it boots fine. So it would be great to get these two
> patches into 4.9.

Yea, many things would be nice, but I've been unable to track the
issues here - it really didn't help _not_ being copied on the
original set of patches which introduced this mess.

I've merged Nicolas' patch, so now we need to work out what to do
with the remaining bits - which I guess are the asm-prototypes.h
and the mmio* bits.  I'm not aware of what's happening with the
patches that they depend on (which is why I recently asked the
question - again, I seem to be completely out of the loop due to
lack of Cc's).

So I'm just throwing my hands up and saying "I don't know what to
do" at this stage.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

Re: [1/2] kbuild: provide include/asm/asm-prototypes.h for ARM

[Nicholas Piggin]

On Mon, 21 Nov 2016 19:13:55 +0000
Russell King - ARM Linux <linux@armlinux.org.uk> wrote:

> On Mon, Nov 21, 2016 at 07:46:44PM +0100, Uwe Kleine-König wrote:
> > Hello,
> > 
> > On Mon, Oct 24, 2016 at 05:05:26PM +0200, Arnd Bergmann wrote:  
> > > This adds an asm/asm-prototypes.h header for ARM to fix the
> > > broken symbol versioning for symbols exported from assembler
> > > files.
> > > 
> > > In addition to the header, we have to do these other small
> > > changes:
> > > 
> > > - move the exports from bitops.h to {change,clear,set,...}bit.S
> > > - move the exports from csumpartialgeneric.S into the files
> > >   including it
> > > 
> > > I couldn't find the correct prototypes for the compiler builtins,
> > > so I went with the fake 'void f(void)' prototypes that we had
> > > before.
> > > 
> > > This leaves the mmioset/mmiocpy function for now, as it's not
> > > obvious how to best handle them.
> > > 
> > > Signed-off-by: Arnd Bergmann <arnd@arndb.de>  
> > 
> > In my test builds of 4.9-rc5 plus
> > 
> > 	4efca4ed05cb ("kbuild: modversions for EXPORT_SYMBOL() for asm")
> > 	cc6acc11cad1 ("kbuild: be more careful about matching preprocessed asm ___EXPORT_SYMBOL")
> > 
> > (which are in -rc6) I got many warnings à la:
> > 
> > 	WARNING: "memset" [drivers/media/usb/airspy/airspy.ko] has no CRC!
> > 
> > and booting the resulting kernel failed with messages of the type:
> > 
> > 	[    3.024126] usbcore: no symbol version for __memzero
> > 	[    3.029107] usbcore: Unknown symbol __memzero (err -22)
> > 
> > so hardly any module could be loaded. modprobe -f works however, but
> > that's not what my initramfs does.
> > 
> > With this patch and https://patchwork.kernel.org/patch/9392291/ ("ARM:
> > move mmiocpy/mmioset exports to io.c") I could compile a kernel without
> > CRC warnings and it boots fine. So it would be great to get these two
> > patches into 4.9.  
> 
> Yea, many things would be nice, but I've been unable to track the
> issues here - it really didn't help _not_ being copied on the
> original set of patches which introduced this mess.

Quick overview:

- asm exports changes allow EXPORT_SYMBOL to be moved into .S files,
  but they would not get modversion CRCs generated.

- The core kbuild patches to add modversions support for asm exports
  is now merged in Linus's tree from the recent kbuild tree pull.
  asm/asm-prototypes.h must contain C style declarations of the symbol
  for this to work.

- Architectures can now add their asm/asm-prototypes.h and things
  *should* start working.

- Dependency is not a hard one. If you add asm-prototypes.h before
  merging the core patches then it should not introduce any problems.


> I've merged Nicolas' patch, so now we need to work out what to do
> with the remaining bits - which I guess are the asm-prototypes.h
> and the mmio* bits.  I'm not aware of what's happening with the
> patches that they depend on (which is why I recently asked the
> question - again, I seem to be completely out of the loop due to
> lack of Cc's).
> 
> So I'm just throwing my hands up and saying "I don't know what to
> do" at this stage.
> 

I don't think you have missed much since last it came up, it's just
taken a bit of time to get the details right and get it merged.

Not sure what your tree looks like, but if you merge this patch 1/2
plus 2a/2 or 2b/2 into upstream, then ARM should be working.

Thanks,
Nick

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Jiri Slaby]

On 10/17/2016, 12:01 PM, Adam Borowski wrote:
> Anyway, here's my stab at x86:

Hi,

what happened to this? I had to apply this to fix 4.9-pae kernel here.

> From db746df65b920591606398b4b244f5b6dc9eea04 Mon Sep 17 00:00:00 2001
> From: Adam Borowski <kilobyte@angband.pl>
> Date: Mon, 17 Oct 2016 11:42:35 +0200
> Subject: [PATCH] kbuild: provide include/asm/asm-prototypes.h for x86
> 
> Nicholas Piggin wrote:
>> Architectures will need to have an include/asm/asm-prototypes.h that
>> defines or #include<>s C-style prototypes for exported asm functions.
>> We can do an asm-generic version for the common ones like memset so
>> there's not a lot of pointless duplication there.
> 
> Signed-off-by: Adam Borowski <kilobyte@angband.pl>
> ---
>  arch/x86/include/asm/asm-prototypes.h | 13 +++++++++++++
>  include/asm-generic/asm-prototypes.h  |  7 +++++++
>  2 files changed, 20 insertions(+)
>  create mode 100644 arch/x86/include/asm/asm-prototypes.h
>  create mode 100644 include/asm-generic/asm-prototypes.h
> 
> diff --git a/arch/x86/include/asm/asm-prototypes.h b/arch/x86/include/asm/asm-prototypes.h
> new file mode 100644
> index 0000000..072c97c
> --- /dev/null
> +++ b/arch/x86/include/asm/asm-prototypes.h
> @@ -0,0 +1,13 @@
> +#include <asm/ftrace.h>
> +#include <asm/uaccess.h>
> +#include <asm/uaccess.h>
> +#include <asm/string.h>
> +#include <asm/page.h>
> +#include <asm/checksum.h>
> +
> +#include <asm-generic/asm-prototypes.h>
> +
> +#include <asm/page.h>
> +#include <asm/pgtable.h>
> +#include <asm/special_insns.h>
> +#include <asm/preempt.h>
> diff --git a/include/asm-generic/asm-prototypes.h b/include/asm-generic/asm-prototypes.h
> new file mode 100644
> index 0000000..df13637
> --- /dev/null
> +++ b/include/asm-generic/asm-prototypes.h
> @@ -0,0 +1,7 @@
> +#include <linux/bitops.h>
> +extern void *__memset(void *, int, __kernel_size_t);
> +extern void *__memcpy(void *, const void *, __kernel_size_t);
> +extern void *__memmove(void *, const void *, __kernel_size_t);
> +extern void *memset(void *, int, __kernel_size_t);
> +extern void *memcpy(void *, const void *, __kernel_size_t);
> +extern void *memmove(void *, const void *, __kernel_size_t);
> 

thanks,
-- 
js
suse labs

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Linus Torvalds]

On Fri, Dec 16, 2016 at 11:55 AM, Jiri Slaby <jslaby@suse.cz> wrote:
>
> what happened to this? I had to apply this to fix 4.9-pae kernel here.

Did you actually have to do that?

Because a missing CRC shouldn't be fatal in 4.9.

What was the failure mode?

                Linus

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Jiri Slaby]

On 12/16/2016, 08:57 PM, Linus Torvalds wrote:
> On Fri, Dec 16, 2016 at 11:55 AM, Jiri Slaby <jslaby@suse.cz> wrote:
>>
>> what happened to this? I had to apply this to fix 4.9-pae kernel here.
> 
> Did you actually have to do that?

Yes, disk drivers won't load:
[    2.141973] virtio_pci: disagrees about version of symbol mcount
[    2.144415] virtio_pci: Unknown symbol mcount (err -22)
[    2.164547] virtio_pci: disagrees about version of symbol mcount
[    2.166309] virtio_pci: Unknown symbol mcount (err -22)
[    2.180651] virtio_pci: disagrees about version of symbol mcount
[    2.182823] virtio_pci: Unknown symbol mcount (err -22)
[    2.210943] virtio_pci: disagrees about version of symbol mcount
[    2.220097] virtio_pci: Unknown symbol mcount (err -22)
[    2.220173] ata_piix: disagrees about version of symbol mcount
[    2.220174] ata_piix: Unknown symbol mcount (err -22)

and whole machine gets stuck with systemd waiting for /dev/sd*.

> Because a missing CRC shouldn't be fatal in 4.9.
> 
> What was the failure mode?

I am not sure what you mean? The kernel is rpm-ized 4.9 vanilla and this
is the config:
http://kernel.suse.com/cgit/kernel-source/tree/config/i386/default?h=stable

thanks,
-- 
js
suse labs

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Adam Borowski]

On Sat, Dec 17, 2016 at 09:57:47AM +0100, Jiri Slaby wrote:
> On 12/16/2016, 08:57 PM, Linus Torvalds wrote:
> > On Fri, Dec 16, 2016 at 11:55 AM, Jiri Slaby <jslaby@suse.cz> wrote:
> >>
> >> what happened to this? I had to apply this to fix 4.9-pae kernel here.
> > 
> > Did you actually have to do that?
> 
> Yes, disk drivers won't load:
> [    2.141973] virtio_pci: disagrees about version of symbol mcount
> [    2.144415] virtio_pci: Unknown symbol mcount (err -22)
> and whole machine gets stuck with systemd waiting for /dev/sd*.
> 
> > Because a missing CRC shouldn't be fatal in 4.9.

Most of us get just a scary-looking warning, but whatever the problem is for
you, it's good to hear this patch works around it.

Whatever the long-term solution will be, for 4.10 an updated[1] version of
this fix is on kbuild/kbuild (and kbuild/for-next).  I guess we'll bother
stable@ once it is merged.

Note that it handles only x86, there's a bunch of other architectures
affected, alpha m68k s390 sparc ia64 might still need fixing.


Meow!

[1]. Turns out there was a missing symbol on 486; people build-test those
but don't try to actually boot, and even when they do, they don't read
warnings.
-- 
Autotools hint: to do a zx-spectrum build on a pdp11 host, type:
  ./configure --host=zx-spectrum --build=pdp11

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Linus Torvalds]

On Sat, Dec 17, 2016 at 12:57 AM, Jiri Slaby <jslaby@suse.cz> wrote:
>
> Yes, disk drivers won't load:
> [    2.141973] virtio_pci: disagrees about version of symbol mcount
> [    2.144415] virtio_pci: Unknown symbol mcount (err -22)

This makes no sense.

mcount isn't even one of the symbols that the patch by Adam is touching.

There's something else screwed up here. Not to mention that others
don't have your issue.

Do you have some other hacks in this area? Are you testing actual
plain 4.9, or do you (for example) still carry Arnd's patch around
that turned out to not work (reverted by f27c2f69cc8e in my tree)?

           Linus

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Jiri Slaby]

On 12/18/2016, 12:59 AM, Linus Torvalds wrote:
> On Sat, Dec 17, 2016 at 12:57 AM, Jiri Slaby <jslaby@suse.cz> wrote:
>>
>> Yes, disk drivers won't load:
>> [    2.141973] virtio_pci: disagrees about version of symbol mcount
>> [    2.144415] virtio_pci: Unknown symbol mcount (err -22)
> 
> This makes no sense.
> 
> mcount isn't even one of the symbols that the patch by Adam is touching.

asm-prototypes.h in his patch includes asm/ftrace.h, where the function
is declared. That should be enough IIUC scripts/Makefile.build.

> There's something else screwed up here. Not to mention that others
> don't have your issue.

I suppose people don't run i386 kernels or have different config.

> Do you have some other hacks in this area? Are you testing actual
> plain 4.9, or do you (for example) still carry Arnd's patch around
> that turned out to not work (reverted by f27c2f69cc8e in my tree)?

Not at all. This was plain 4.9 packaged by suse -- only rpm-related
fixes. I tried plain 4.9 without rpm right now with the same output:
# insmod soundcore.ko
[   31.582326] soundcore: disagrees about version of symbol mcount
[   31.586183] soundcore: Unknown symbol mcount (err -22)
insmod: ERROR: could not insert module soundcore.ko: Invalid parameters


$ git describe @
v4.9
$ git status
HEAD detached at v4.9


thanks,
-- 
js
suse labs

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Arend Van Spriel]

On 18-12-2016 11:49, Jiri Slaby wrote:
> On 12/18/2016, 12:59 AM, Linus Torvalds wrote:
>> On Sat, Dec 17, 2016 at 12:57 AM, Jiri Slaby <jslaby@suse.cz> wrote:
>>>
>>> Yes, disk drivers won't load:
>>> [    2.141973] virtio_pci: disagrees about version of symbol mcount
>>> [    2.144415] virtio_pci: Unknown symbol mcount (err -22)
>>
>> This makes no sense.
>>
>> mcount isn't even one of the symbols that the patch by Adam is touching.
> 
> asm-prototypes.h in his patch includes asm/ftrace.h, where the function
> is declared. That should be enough IIUC scripts/Makefile.build.
> 
>> There's something else screwed up here. Not to mention that others
>> don't have your issue.
> 
> I suppose people don't run i386 kernels or have different config.
> 
>> Do you have some other hacks in this area? Are you testing actual
>> plain 4.9, or do you (for example) still carry Arnd's patch around
>> that turned out to not work (reverted by f27c2f69cc8e in my tree)?
> 
> Not at all. This was plain 4.9 packaged by suse -- only rpm-related
> fixes. I tried plain 4.9 without rpm right now with the same output:
> # insmod soundcore.ko
> [   31.582326] soundcore: disagrees about version of symbol mcount
> [   31.586183] soundcore: Unknown symbol mcount (err -22)
> insmod: ERROR: could not insert module soundcore.ko: Invalid parameters

I hit an mcount issue a while back (years?) which was due to building a
driver with gcc v4.x while kernel was built using gcc v4.y. Not claiming
that is your issue though.

Regards,
Arend

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Nikolay Borisov]

On 18.12.2016 13:03, Arend Van Spriel wrote:
> On 18-12-2016 11:49, Jiri Slaby wrote:
>> On 12/18/2016, 12:59 AM, Linus Torvalds wrote:
>>> On Sat, Dec 17, 2016 at 12:57 AM, Jiri Slaby <jslaby@suse.cz> wrote:
>>>>
>>>> Yes, disk drivers won't load:
>>>> [    2.141973] virtio_pci: disagrees about version of symbol mcount
>>>> [    2.144415] virtio_pci: Unknown symbol mcount (err -22)
>>>
>>> This makes no sense.
>>>
>>> mcount isn't even one of the symbols that the patch by Adam is touching.
>>
>> asm-prototypes.h in his patch includes asm/ftrace.h, where the function
>> is declared. That should be enough IIUC scripts/Makefile.build.
>>
>>> There's something else screwed up here. Not to mention that others
>>> don't have your issue.
>>
>> I suppose people don't run i386 kernels or have different config.
>>
>>> Do you have some other hacks in this area? Are you testing actual
>>> plain 4.9, or do you (for example) still carry Arnd's patch around
>>> that turned out to not work (reverted by f27c2f69cc8e in my tree)?
>>
>> Not at all. This was plain 4.9 packaged by suse -- only rpm-related
>> fixes. I tried plain 4.9 without rpm right now with the same output:
>> # insmod soundcore.ko
>> [   31.582326] soundcore: disagrees about version of symbol mcount
>> [   31.586183] soundcore: Unknown symbol mcount (err -22)
>> insmod: ERROR: could not insert module soundcore.ko: Invalid parameters
> 
> I hit an mcount issue a while back (years?) which was due to building a
> driver with gcc v4.x while kernel was built using gcc v4.y. Not claiming
> that is your issue though.

I've usually had the same thing happen to me if things were compiled
with different gcc versions . Essentially in newer gcc (starting with
4.6 I believe) CC_USING_FENTRY is defined, meaning that there is no
mcount() symbol but rather __fentry__. This is the likely problem here.


> 
> Regards,
> Arend
> 

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Jiri Slaby]

On 12/18/2016, 02:27 PM, Nikolay Borisov wrote:
> This is the likely problem here.

No, it is not. How could a rpm be built with two compilers?

Moreover, with some modules, __put_user_1 and others are reported
instead of mcount.

-- 
js
suse labs

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Nikolay Borisov]

On 18.12.2016 16:45, Jiri Slaby wrote:
> Moreover, with some modules, __put_user_1 and others are reported
> instead of mcount.


nm vmlinux | grep __fentry__
nm vmlinux | grep mcount

What do these report ? I bet you that in your vmlinux the first one
would return something like :

ffffffff822f1810 T __fentry__
ffffffff827fdc20 r __kcrctab___fentry__
ffffffff82809461 r __kstrtab___fentry__
ffffffff827e6c20 R __ksymtab___fentry__
 and nothing for the second. Whereas doing nm on the module in question
would give nothing for __fentry__ and something like: U mcount

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Jiri Slaby]

On 12/18/2016, 03:54 PM, Nikolay Borisov wrote:
> 
> 
> On 18.12.2016 16:45, Jiri Slaby wrote:
>> Moreover, with some modules, __put_user_1 and others are reported
>> instead of mcount.
> 
> 
> nm vmlinux | grep __fentry__
> nm vmlinux | grep mcount
> 
> What do these report ? I bet you that in your vmlinux the first one
> would return something like :
> 
> ffffffff822f1810 T __fentry__
> ffffffff827fdc20 r __kcrctab___fentry__
> ffffffff82809461 r __kstrtab___fentry__
> ffffffff827e6c20 R __ksymtab___fentry__
>  and nothing for the second. Whereas doing nm on the module in question
> would give nothing for __fentry__ and something like: U mcount

Well, I have just won a beer:
$ nm vmlinux | grep mcount
         w __crc_mcount
c0b3bd34 r __kcrctab_mcount
c0b41692 r __kstrtab_mcount
c0b2dd04 R __ksymtab_mcount
c0896130 T mcount
c0c9ee20 T __start_mcount_loc
c0cba89c T __stop_mcount_loc
$ nm vmlinux | grep __fentry__
$ nm sound/soundcore.ko | grep mcount
         U mcount

No, I am really not stupid. We compile the kernels like this for over a
decade and it really broke with 4.9. Applying the patch fixes the
problem. Reverting it, makes it recur.

regards,
-- 
js
suse labs

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Mathieu OTHACEHE]

Hi,

>> Reverting 784d5699eddc ("x86: move exports to actual definitions") fixes
>> it for me. This is with GCC 6.2.1, binutils 2.27, attached config.

I've had the same problem. Reverting your binutils from 2.27 to 2.26,
will also fix it. It seems ld 2.27 is not merging weak symbols from .o
files to vmlinux when linking.

Anyhow all crc for symbols exported from .S will be 0, so Nicholas
patch make sense.

Mathieu

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Nicholas Piggin]

On Sat, 15 Oct 2016 17:22:05 -0700
Omar Sandoval <osandov@osandov.com> wrote:

> On Fri, Oct 14, 2016 at 10:12:46PM +0200, Michal Marek wrote:
> > Hi Linus,
> > 
> > please pull these kbuild changes for v4.9-rc1:
> > 
> > - EXPORT_SYMBOL for asm source by Al Viro. This does bring a regression,
> >   because genksyms no longer generates checksums for these symbols
> >   (CONFIG_MODVERSIONS). Nick Piggin is working on a patch to fix this.
> >   Plus, we are talking about functions like strcpy(), which rarely
> >   change prototypes.  
> 
> So this has broken all module loading for me. I get the following dmesg
> spew:
> 
> ...
> [    4.586914] scsi_mod: no symbol version for memset
> [    4.587920] scsi_mod: Unknown symbol memset (err -22)
> [    4.588443] scsi_mod: no symbol version for ___preempt_schedule
> [    4.589026] scsi_mod: Unknown symbol ___preempt_schedule (err -22)
> ...
> 
> Reverting 784d5699eddc ("x86: move exports to actual definitions") fixes
> it for me. This is with GCC 6.2.1, binutils 2.27, attached config.
> 

Thanks for the report. Could you try this patch and see if it helps?


Allow architectures to create asm/asm-prototypes.h file that
provides C prototypes for exported asm functions, which enables
proper CRC versions to be generated for them.

It's done by creating a trivial C program that includes that file
and the EXPORT_SYMBOL()s from the .S file, and preprocesses that
then sends the result to genksyms.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 scripts/Makefile.build | 71 +++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 65 insertions(+), 6 deletions(-)

diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index de46ab0..edcf876 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -159,7 +159,8 @@ cmd_cpp_i_c       = $(CPP) $(c_flags) -o $@ $<
 $(obj)/%.i: $(src)/%.c FORCE
 	$(call if_changed_dep,cpp_i_c)
 
-cmd_gensymtypes =                                                           \
+# These mirror gensymtypes_S and co below, keep them in synch.
+cmd_gensymtypes_c =                                                         \
     $(CPP) -D__GENKSYMS__ $(c_flags) $< |                                   \
     $(GENKSYMS) $(if $(1), -T $(2))                                         \
      $(patsubst y,-s _,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX))             \
@@ -169,7 +170,7 @@ cmd_gensymtypes =                                                           \
 quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
 cmd_cc_symtypes_c =                                                         \
     set -e;                                                                 \
-    $(call cmd_gensymtypes,true,$@) >/dev/null;                             \
+    $(call cmd_gensymtypes_c,true,$@) >/dev/null;                           \
     test -s $@ || rm -f $@
 
 $(obj)/%.symtypes : $(src)/%.c FORCE
@@ -198,9 +199,10 @@ else
 #   the actual value of the checksum generated by genksyms
 
 cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $<
-cmd_modversions =								\
+
+cmd_modversions_c =								\
 	if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then		\
-		$(call cmd_gensymtypes,$(KBUILD_SYMTYPES),$(@:.o=.symtypes))	\
+		$(call cmd_gensymtypes_c,$(KBUILD_SYMTYPES),$(@:.o=.symtypes))	\
 		    > $(@D)/.tmp_$(@F:.o=.ver);					\
 										\
 		$(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) 			\
@@ -268,13 +270,14 @@ endif # CONFIG_STACK_VALIDATION
 define rule_cc_o_c
 	$(call echo-cmd,checksrc) $(cmd_checksrc)			  \
 	$(call cmd_and_fixdep,cc_o_c)					  \
-	$(cmd_modversions)						  \
+	$(cmd_modversions_c)						  \
 	$(cmd_objtool)						          \
 	$(call echo-cmd,record_mcount) $(cmd_record_mcount)
 endef
 
 define rule_as_o_S
 	$(call cmd_and_fixdep,as_o_S)					  \
+	$(cmd_modversions_S)						  \
 	$(cmd_objtool)
 endef
 
@@ -314,6 +317,32 @@ modkern_aflags := $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL)
 $(real-objs-m)      : modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
 $(real-objs-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
 
+# .S file exports must have their C prototypes defined in asm/asm-prototypes.h
+# or a file that it includes, in order to get versioned symbols. We build a
+# dummy C file that includes asm-prototypes and the EXPORT_SYMBOL lines from
+# the .S file (with trailing ';'), and run genksyms on that, to extract vers.
+#
+# These mirror gensymtypes_c and co above, keep them in synch.
+cmd_gensymtypes_S =                                                         \
+    (echo "\#include <linux/kernel.h>" ;                                    \
+     echo "\#include <asm/asm-prototypes.h>" ;                              \
+     grep EXPORT_SYMBOL $< | sed 's/$$/;/' ) |                              \
+    $(CPP) -D__GENKSYMS__ $(c_flags) -xc - |                                \
+    $(GENKSYMS) $(if $(1), -T $(2))                                         \
+     $(patsubst y,-s _,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX))             \
+     $(if $(KBUILD_PRESERVE),-p)                                            \
+     -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null))
+
+quiet_cmd_cc_symtypes_S = SYM $(quiet_modtag) $@
+cmd_cc_symtypes_S =                                                         \
+    set -e;                                                                 \
+    $(call cmd_gensymtypes_S,true,$@) >/dev/null;                           \
+    test -s $@ || rm -f $@
+
+$(obj)/%.symtypes : $(src)/%.S FORCE
+	$(call cmd,cc_symtypes_S)
+
+
 quiet_cmd_cpp_s_S = CPP $(quiet_modtag) $@
 cmd_cpp_s_S       = $(CPP) $(a_flags) -o $@ $<
 
@@ -321,7 +350,37 @@ $(obj)/%.s: $(src)/%.S FORCE
 	$(call if_changed_dep,cpp_s_S)
 
 quiet_cmd_as_o_S = AS $(quiet_modtag)  $@
-cmd_as_o_S       = $(CC) $(a_flags) -c -o $@ $<
+
+ifndef CONFIG_MODVERSIONS
+cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
+
+else
+
+ASM_PROTOTYPES := $(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/asm-prototypes.h)
+
+ifeq ($(ASM_PROTOTYPES),)
+cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
+
+else
+
+# versioning matches the C process described above, with difference that
+# we parse asm-prototypes.h C header to get function definitions.
+
+cmd_as_o_S = $(CC) $(a_flags) -c -o $(@D)/.tmp_$(@F) $<
+
+cmd_modversions_S =								\
+	if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then		\
+		$(call cmd_gensymtypes_S,$(KBUILD_SYMTYPES),$(@:.o=.symtypes))	\
+		    > $(@D)/.tmp_$(@F:.o=.ver);					\
+										\
+		$(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) 			\
+			-T $(@D)/.tmp_$(@F:.o=.ver);				\
+		rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver);		\
+	else									\
+		mv -f $(@D)/.tmp_$(@F) $@;					\
+	fi;
+endif
+endif
 
 $(obj)/%.o: $(src)/%.S $(objtool_obj) FORCE
 	$(call if_changed_rule,as_o_S)
-- 
2.9.3

Re: [GIT PULL] kbuild changes for v4.9-rc1

[Omar Sandoval]

[-- Attachment #1: Type: text/plain, Size: 925 bytes --]

On Fri, Oct 14, 2016 at 10:12:46PM +0200, Michal Marek wrote:
> Hi Linus,
> 
> please pull these kbuild changes for v4.9-rc1:
> 
> - EXPORT_SYMBOL for asm source by Al Viro. This does bring a regression,
>   because genksyms no longer generates checksums for these symbols
>   (CONFIG_MODVERSIONS). Nick Piggin is working on a patch to fix this.
>   Plus, we are talking about functions like strcpy(), which rarely
>   change prototypes.

So this has broken all module loading for me. I get the following dmesg
spew:

...
[    4.586914] scsi_mod: no symbol version for memset
[    4.587920] scsi_mod: Unknown symbol memset (err -22)
[    4.588443] scsi_mod: no symbol version for ___preempt_schedule
[    4.589026] scsi_mod: Unknown symbol ___preempt_schedule (err -22)
...

Reverting 784d5699eddc ("x86: move exports to actual definitions") fixes
it for me. This is with GCC 6.2.1, binutils 2.27, attached config.

-- 
Omar

[-- Attachment #2: qemu.config --]
[-- Type: text/plain, Size: 113296 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 4.9.0-rc1 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEBUG_RODATA=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y

#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_EXPEDITE_BOOT is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=19
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_NMI_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_HUGETLB is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_BPF_SYSCALL=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_USERFAULTFD=y
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_KEXEC_CORE=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
CONFIG_CC_STACKPROTECTOR_STRONG=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not set
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_CMDLINE_PARSER is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_AIX_PARTITION=y
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_512GB=y
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
CONFIG_XEN_PVH=y
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=128
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_VM86 is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_MOVABLE_NODE is not set
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HWPOISON_INJECT is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
# CONFIG_ZONE_DEVICE is not set
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_MIXED=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_NATIVE is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_REV_OVERRIDE_POSSIBLE is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_FAN is not set
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
# CONFIG_ACPI_THERMAL is not set
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y

#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
# CONFIG_PCI_STUB is not set
# CONFIG_XEN_PCIDEV_FRONTEND is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
CONFIG_HOTPLUG_PCI_CPCI=y
# CONFIG_HOTPLUG_PCI_CPCI_ZT5550 is not set
# CONFIG_HOTPLUG_PCI_CPCI_GENERIC is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# PCI host controller drivers
#
# CONFIG_PCIE_DW_PLAT is not set
# CONFIG_VMD is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_NET_IP_TUNNEL is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
# CONFIG_NET_UDP_TUNNEL is not set
# CONFIG_NET_FOU is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_NV is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_FOU is not set
# CONFIG_IPV6_FOU_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NF_TABLES is not set
CONFIG_NETFILTER_XTABLES=m

#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_LED is not set
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set

#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ECN is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_NF_DUP_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
# CONFIG_NF_REJECT_IPV4 is not set
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_FILTER is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_SECURITY is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not set
# CONFIG_NF_REJECT_IPV6 is not set
# CONFIG_NF_LOG_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_INGRESS is not set
# CONFIG_NET_SCH_PLUG is not set

#
# Classification
#
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
CONFIG_MPLS=y
# CONFIG_NET_MPLS_GSO is not set
# CONFIG_MPLS_ROUTING is not set
# CONFIG_HSR is not set
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_SOCK_CGROUP_DATA=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_LWTUNNEL=y
# CONFIG_DST_CACHE is not set
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set

#
# Bus devices
#
# CONFIG_QCOM_EBI2 is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_XEN_BLKDEV_FRONTEND is not set
# CONFIG_XEN_BLKDEV_BACKEND is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
# CONFIG_BLK_DEV_NVME_SCSI is not set
# CONFIG_NVME_TARGET is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_PANEL is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set

#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set

#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set

#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=m
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_XEN_SCSI_FRONTEND is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_DH=y
# CONFIG_SCSI_DH_RDAC is not set
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_ZPODD=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BCACHE is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=m
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=m
# CONFIG_NLMON is not set
# CONFIG_NET_VRF is not set
# CONFIG_ARCNET is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
CONFIG_NET_VENDOR_AURORA=y
# CONFIG_AURORA_NB8800 is not set
CONFIG_NET_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
CONFIG_NET_VENDOR_EXAR=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_FM10K is not set
CONFIG_NET_VENDOR_I825XX=y
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_MVNETA_BM is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP_NETVF is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
# CONFIG_NET_VENDOR_RENESAS is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
# CONFIG_SFC is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_ALE is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_PHYLIB is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Host-side USB support is needed for USB Network Adapter support
#
# CONFIG_USB_NET_DRIVERS is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K_PCI=y
# CONFIG_ATH6KL is not set
# CONFIG_WIL6210 is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_MWIFIEX is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_XEN_NETDEV_FRONTEND is not set
# CONFIG_XEN_NETDEV_BACKEND is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
# CONFIG_ISDN_CAPI is not set
# CONFIG_ISDN_DRV_GIGASET is not set
# CONFIG_HYSDN is not set
# CONFIG_MISDN is not set
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=m
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=m
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_VMMOUSE=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_JOYSTICK_WALKERA0701 is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_GPIO_DECODER is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_XEN_KBDDEV_FRONTEND is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=m
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=m
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_NOZOMI is not set
# CONFIG_ISI is not set
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_FSL is not set
# CONFIG_SERIAL_8250_DW is not set
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_PRINTER is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HPET_MMAP_DEFAULT=y
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS_CORE=m
CONFIG_TCG_TIS=m
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_INFINEON is not set
# CONFIG_TCG_XEN is not set
# CONFIG_TCG_CRB is not set
# CONFIG_TCG_VTPM_PROXY is not set
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y

#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
CONFIG_PINCTRL_BAYTRAIL=y
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_ICH is not set
# CONFIG_GPIO_LYNXPOINT is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_ZX is not set

#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_TPIC2810 is not set
# CONFIG_GPIO_TS4900 is not set

#
# MFD GPIO expanders
#
CONFIG_GPIO_CRYSTAL_COVE=y
# CONFIG_GPIO_WHISKEY_COVE is not set

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set

#
# SPI or I2C GPIO expanders
#

#
# USB GPIO expanders
#
# CONFIG_W1 is not set
CONFIG_POWER_AVS=y
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_DELL_SMM is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_FTSTEUTATES is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set
# CONFIG_X86_PKG_TEMP_THERMAL is not set
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# CONFIG_INTEL_BXT_PMIC_THERMAL is not set
# CONFIG_INTEL_PCH_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_SYSFS=y

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
# CONFIG_IE6XX_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_NI903X_WDT is not set
# CONFIG_MEN_A21_WDT is not set
# CONFIG_XEN_WDT is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_EXYNOS_LPASS is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
CONFIG_INTEL_SOC_PMIC=y
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
CONFIG_ABX500_CORE=y
# CONFIG_AB3100_CORE is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_INTEL_GTT=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
# CONFIG_DRM_DP_AUX_CHARDEV is not set
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set

#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_LEGACY is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set

#
# HID support
#
# CONFIG_HID is not set

#
# USB HID support
#
# CONFIG_USB_HID is not set
CONFIG_HID_PID=y

#
# I2C HID support
#
# CONFIG_I2C_HID is not set

#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=m
CONFIG_USB_XHCI_PCI=m
# CONFIG_USB_XHCI_PLATFORM is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=m

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_UCSI is not set

#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_FOTG210_UDC is not set
# CONFIG_USB_GR_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_BDC_UDC is not set
# CONFIG_USB_AMD5536UDC is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_NET2280 is not set
# CONFIG_USB_GOKU is not set
# CONFIG_USB_EG20T is not set
# CONFIG_USB_DUMMY_HCD is not set
# CONFIG_USB_CONFIGFS is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
CONFIG_USB_LED_TRIG=y
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
# CONFIG_LEDS_CLASS_FLASH is not set

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP3952 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXCPLD is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_DECODE_MCE is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV8803 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#

#
# HID Sensor RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
CONFIG_DW_DMAC_PCI=y
CONFIG_HSU_DMA=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
CONFIG_AUXDISPLAY=y
# CONFIG_KS0108 is not set
# CONFIG_IMG_ASCII_LCD is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_INPUT=m
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set

#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
# CONFIG_XEN_SELFBALLOONING is not set
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG_LIMIT=512
CONFIG_XEN_SCRUB_PAGES=y
# CONFIG_XEN_DEV_EVTCHN is not set
CONFIG_XEN_BACKEND=y
# CONFIG_XENFS is not set
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=m
# CONFIG_XEN_PCIDEV_BACKEND is not set
CONFIG_XEN_PRIVCMD=m
# CONFIG_XEN_ACPI_PROCESSOR is not set
# CONFIG_XEN_MCE_LOG is not set
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
CONFIG_XEN_HAVE_VPMU=y
CONFIG_STAGING=y
# CONFIG_SLICOSS is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_COMEDI is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
# CONFIG_R8712U is not set
# CONFIG_R8188EU is not set
# CONFIG_RTS5208 is not set
# CONFIG_FB_SM750 is not set
# CONFIG_FB_XGI is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
CONFIG_STAGING_MEDIA=y

#
# Android
#
# CONFIG_LTE_GDM724X is not set
# CONFIG_LNET is not set
# CONFIG_DGNC is not set
# CONFIG_GS_FPGABOOT is not set
CONFIG_CRYPTO_SKEIN=y
# CONFIG_UNISYSSPAR is not set
# CONFIG_FB_TFT is not set
# CONFIG_WILC1000_SPI is not set
# CONFIG_MOST is not set
# CONFIG_GREYBUS is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBTN is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_IBM_RTL is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_INTEL_RST is not set
CONFIG_INTEL_SMARTCONNECT=y
# CONFIG_PVPANIC is not set
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
CONFIG_CHROME_PLATFORMS=y
# CONFIG_CHROMEOS_LAPTOP is not set
# CONFIG_CHROMEOS_PSTORE is not set
# CONFIG_CROS_KBD_LED_BACKLIGHT is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_NXP is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set
# CONFIG_COMMON_CLK_MT8135 is not set
# CONFIG_COMMON_CLK_MT8173 is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IOVA=y
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_V2 is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_SVM=y
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#

#
# Broadcom SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
# CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND is not set
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
# CONFIG_DEVFREQ_GOV_PASSIVE is not set

#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
# CONFIG_EXTCON is not set
CONFIG_MEMORY=y
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STM32 is not set
# CONFIG_RESET_SUNXI is not set
# CONFIG_TI_SYSCON_RESET is not set
# CONFIG_RESET_ZYNQ is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
CONFIG_POWERCAP=y
# CONFIG_INTEL_RAPL is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_THUNDERBOLT is not set

#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_LIBNVDIMM=y
# CONFIG_BLK_DEV_PMEM is not set
# CONFIG_ND_BLK is not set
CONFIG_ND_CLAIM=y
CONFIG_BTT=y
# CONFIG_DEV_DAX is not set
# CONFIG_NVMEM is not set
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set

#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
# CONFIG_ISCSI_IBFT is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
# CONFIG_EFI_VARS is not set
CONFIG_EFI_ESRT=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
CONFIG_UEFI_CPER=y

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_HISTOGRAM=y
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
# CONFIG_CACHEFILES is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_ZLIB_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
# CONFIG_PSTORE_RAM is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=m
CONFIG_NFS_V3=m
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
CONFIG_NFS_SWAP=y
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
CONFIG_NFS_V4_1_MIGRATION=y
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
CONFIG_NFSD_BLOCKLAYOUT=y
CONFIG_NFSD_SCSILAYOUT=y
# CONFIG_NFSD_FLEXFILELAYOUT is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_SWAP=y
CONFIG_SUNRPC_DEBUG=y
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_9P_FS_SECURITY=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_DEBUG_INFO_SPLIT=y
CONFIG_DEBUG_INFO_DWARF4=y
CONFIG_GDB_SCRIPTS=y
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_STACK_VALIDATION is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x0
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_PREEMPT is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_PERF_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SCHED_TRACER=y
# CONFIG_HWLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
CONFIG_UPROBE_EVENT=y
CONFIG_BPF_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_MMIOTRACE_TEST is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_ENUM_MAP_FILE is not set
# CONFIG_TRACING_EVENTS_GPIO is not set

#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_MEMTEST is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_EARLY_PRINTK_EFI=y
# CONFIG_X86_PTDUMP_CORE is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_WX is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_PATH=y
# CONFIG_INTEL_TXT is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_KPP2=y
# CONFIG_CRYPTO_RSA is not set
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_MCRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_SEQIV is not set
# CONFIG_CRYPTO_ECHAINIV is not set

#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_KEYWRAP is not set

#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
# CONFIG_CRYPTO_SHA1_MB is not set
# CONFIG_CRYPTO_SHA256_MB is not set
# CONFIG_CRYPTO_SHA512_MB is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_DRBG_MENU is not set
# CONFIG_CRYPTO_JITTERENTROPY is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_CRYPTO_DEV_CCP=y
# CONFIG_CRYPTO_DEV_CCP_DD is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set

#
# Certificates for signature checking
#
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VHOST_NET is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not set
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
# CONFIG_CORDIC is not set
CONFIG_DDR=y
CONFIG_IRQ_POLL=y
CONFIG_OID_REGISTRY=m
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_6x10 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_FONT_AUTOSELECT=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
CONFIG_SBITMAP=y

[GIT PULL] kbuild changes for v4.9-rc1

[Michal Marek]

Hi Linus,

please pull these kbuild changes for v4.9-rc1:

- EXPORT_SYMBOL for asm source by Al Viro. This does bring a regression,
  because genksyms no longer generates checksums for these symbols
  (CONFIG_MODVERSIONS). Nick Piggin is working on a patch to fix this.
  Plus, we are talking about functions like strcpy(), which rarely
  change prototypes.
- Fixes for PPC fallout of the above by Stephen Rothwell and Nick Piggin
- fixdep speedup by Alexey Dobriyan.
- Preparatory work by Nick Piggin to allow architectures to build with
  -ffunction-sections, -fdata-sections and --gc-sections
- CONFIG_THIN_ARCHIVES support by Stephen Rothwell
- Fix for filenames with colons in the initramfs source by me.


The following changes since commit 29b4817d4018df78086157ea3a55c1d9424a7cfc:

  Linux 4.8-rc1 (2016-08-07 18:18:00 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git kbuild

for you to fetch changes up to 590abbdd273304b55824bcb9ea91840ea375575d:

  initramfs: Escape colons in depfile (2016-09-23 10:35:32 +0200)

----------------------------------------------------------------
Al Viro (12):
      [kbuild] handle exports in lib-y objects reliably
      EXPORT_SYMBOL() for asm
      x86: move exports to actual definitions
      alpha: move exports to actual definitions
      m68k: move exports to definitions
      s390: move exports to definitions
      arm: move exports to definitions
      ppc: move exports to definitions
      sparc: move exports to definitions
      [sparc] unify 32bit and 64bit string.h
      sparc32: debride memcpy.S a bit
      ia64: move exports to definitions

Alexey Dobriyan (1):
      fixdep: faster CONFIG_ search

Michal Marek (2):
      kbuild: Regenerate genksyms lexer
      initramfs: Escape colons in depfile

Nicholas Piggin (5):
      kbuild: genksyms fix for typeof handling
      kbuild: allow archs to select link dead code/data elimination
      kbuild: add arch specific post-link Makefile
      kbuild: -ffunction-sections fix for archs with conflicting sections
      powerpc/64: whitelist unresolved modversions CRCs

Stephen Rothwell (2):
      kbuild: allow architectures to use thin archives instead of ld -r
      ppc: there is no clear_pages to export

 Documentation/kbuild/makefiles.txt    |  16 +++
 Makefile                              |  19 +++-
 arch/Kconfig                          |  21 ++++
 arch/alpha/include/asm/Kbuild         |   1 +
 arch/alpha/kernel/Makefile            |   2 +-
 arch/alpha/kernel/alpha_ksyms.c       | 102 -------------------
 arch/alpha/kernel/machvec_impl.h      |   6 +-
 arch/alpha/kernel/setup.c             |   1 +
 arch/alpha/lib/callback_srm.S         |   5 +
 arch/alpha/lib/checksum.c             |   3 +
 arch/alpha/lib/clear_page.S           |   3 +-
 arch/alpha/lib/clear_user.S           |   2 +
 arch/alpha/lib/copy_page.S            |   3 +-
 arch/alpha/lib/copy_user.S            |   3 +
 arch/alpha/lib/csum_ipv6_magic.S      |   2 +
 arch/alpha/lib/csum_partial_copy.c    |   2 +
 arch/alpha/lib/dec_and_lock.c         |   2 +
 arch/alpha/lib/divide.S               |   3 +
 arch/alpha/lib/ev6-clear_page.S       |   3 +-
 arch/alpha/lib/ev6-clear_user.S       |   3 +-
 arch/alpha/lib/ev6-copy_page.S        |   3 +-
 arch/alpha/lib/ev6-copy_user.S        |   3 +-
 arch/alpha/lib/ev6-csum_ipv6_magic.S  |   2 +
 arch/alpha/lib/ev6-divide.S           |   3 +
 arch/alpha/lib/ev6-memchr.S           |   3 +-
 arch/alpha/lib/ev6-memcpy.S           |   3 +-
 arch/alpha/lib/ev6-memset.S           |   7 +-
 arch/alpha/lib/ev67-strcat.S          |   3 +-
 arch/alpha/lib/ev67-strchr.S          |   3 +-
 arch/alpha/lib/ev67-strlen.S          |   3 +-
 arch/alpha/lib/ev67-strncat.S         |   3 +-
 arch/alpha/lib/ev67-strrchr.S         |   3 +-
 arch/alpha/lib/fpreg.c                |   7 ++
 arch/alpha/lib/memchr.S               |   3 +-
 arch/alpha/lib/memcpy.c               |   5 +-
 arch/alpha/lib/memmove.S              |   3 +-
 arch/alpha/lib/memset.S               |   7 +-
 arch/alpha/lib/strcat.S               |   2 +
 arch/alpha/lib/strchr.S               |   3 +-
 arch/alpha/lib/strcpy.S               |   3 +-
 arch/alpha/lib/strlen.S               |   3 +-
 arch/alpha/lib/strncat.S              |   3 +-
 arch/alpha/lib/strncpy.S              |   3 +-
 arch/alpha/lib/strrchr.S              |   3 +-
 arch/arm/include/asm/Kbuild           |   1 +
 arch/arm/kernel/Makefile              |   2 +-
 arch/arm/kernel/armksyms.c            | 183 ----------------------------------
 arch/arm/kernel/entry-ftrace.S        |   3 +
 arch/arm/kernel/head.S                |   3 +
 arch/arm/kernel/smccc-call.S          |   3 +
 arch/arm/lib/ashldi3.S                |   3 +
 arch/arm/lib/ashrdi3.S                |   3 +
 arch/arm/lib/bitops.h                 |   5 +
 arch/arm/lib/bswapsdi2.S              |   3 +
 arch/arm/lib/clear_user.S             |   4 +
 arch/arm/lib/copy_from_user.S         |   2 +
 arch/arm/lib/copy_page.S              |   2 +
 arch/arm/lib/copy_to_user.S           |   4 +
 arch/arm/lib/csumipv6.S               |   3 +-
 arch/arm/lib/csumpartial.S            |   2 +
 arch/arm/lib/csumpartialcopy.S        |   1 +
 arch/arm/lib/csumpartialcopygeneric.S |   2 +
 arch/arm/lib/csumpartialcopyuser.S    |   1 +
 arch/arm/lib/delay.c                  |   2 +
 arch/arm/lib/div64.S                  |   2 +
 arch/arm/lib/findbit.S                |   9 ++
 arch/arm/lib/getuser.S                |   9 ++
 arch/arm/lib/io-readsb.S              |   2 +
 arch/arm/lib/io-readsl.S              |   2 +
 arch/arm/lib/io-readsw-armv3.S        |   3 +-
 arch/arm/lib/io-readsw-armv4.S        |   2 +
 arch/arm/lib/io-writesb.S             |   2 +
 arch/arm/lib/io-writesl.S             |   2 +
 arch/arm/lib/io-writesw-armv3.S       |   2 +
 arch/arm/lib/io-writesw-armv4.S       |   2 +
 arch/arm/lib/lib1funcs.S              |   9 ++
 arch/arm/lib/lshrdi3.S                |   3 +
 arch/arm/lib/memchr.S                 |   2 +
 arch/arm/lib/memcpy.S                 |   3 +
 arch/arm/lib/memmove.S                |   2 +
 arch/arm/lib/memset.S                 |   3 +
 arch/arm/lib/memzero.S                |   2 +
 arch/arm/lib/muldi3.S                 |   3 +
 arch/arm/lib/putuser.S                |   5 +
 arch/arm/lib/strchr.S                 |   2 +
 arch/arm/lib/strrchr.S                |   2 +
 arch/arm/lib/uaccess_with_memcpy.c    |   3 +
 arch/arm/lib/ucmpdi2.S                |   3 +
 arch/arm/mach-imx/Makefile            |   1 -
 arch/arm/mach-imx/ssi-fiq-ksym.c      |  20 ----
 arch/arm/mach-imx/ssi-fiq.S           |   7 +-
 arch/ia64/hp/sim/boot/Makefile        |   2 +-
 arch/ia64/include/asm/export.h        |   3 +
 arch/ia64/kernel/entry.S              |   3 +
 arch/ia64/kernel/esi_stub.S           |   2 +
 arch/ia64/kernel/head.S               |   2 +
 arch/ia64/kernel/ia64_ksyms.c         |  94 +----------------
 arch/ia64/kernel/ivt.S                |   2 +
 arch/ia64/kernel/pal.S                |   7 ++
 arch/ia64/kernel/setup.c              |   4 +
 arch/ia64/lib/Makefile                |   8 +-
 arch/ia64/lib/clear_page.S            |   2 +
 arch/ia64/lib/clear_user.S            |   2 +
 arch/ia64/lib/copy_page.S             |   2 +
 arch/ia64/lib/copy_page_mck.S         |   2 +
 arch/ia64/lib/copy_user.S             |   2 +
 arch/ia64/lib/flush.S                 |   2 +
 arch/ia64/lib/idiv32.S                |   2 +
 arch/ia64/lib/idiv64.S                |   2 +
 arch/ia64/lib/ip_fast_csum.S          |   3 +
 arch/ia64/lib/memcpy.S                |   2 +
 arch/ia64/lib/memcpy_mck.S            |   3 +
 arch/ia64/lib/memset.S                |   2 +
 arch/ia64/lib/strlen.S                |   2 +
 arch/ia64/lib/strlen_user.S           |   2 +
 arch/ia64/lib/strncpy_from_user.S     |   2 +
 arch/ia64/lib/strnlen_user.S          |   2 +
 arch/ia64/lib/xor.S                   |   5 +
 arch/m68k/include/asm/export.h        |   3 +
 arch/m68k/kernel/Makefile             |   2 +-
 arch/m68k/kernel/m68k_ksyms.c         |  32 ------
 arch/m68k/lib/ashldi3.c               |   4 +
 arch/m68k/lib/ashrdi3.c               |   4 +
 arch/m68k/lib/divsi3.S                |   3 +
 arch/m68k/lib/lshrdi3.c               |   4 +
 arch/m68k/lib/modsi3.S                |   3 +
 arch/m68k/lib/muldi3.c                |   4 +
 arch/m68k/lib/mulsi3.S                |   4 +-
 arch/m68k/lib/udivsi3.S               |   4 +-
 arch/m68k/lib/umodsi3.S               |   4 +-
 arch/powerpc/include/asm/Kbuild       |   1 +
 arch/powerpc/kernel/Makefile          |   4 -
 arch/powerpc/kernel/entry_32.S        |   2 +
 arch/powerpc/kernel/entry_64.S        |   3 +
 arch/powerpc/kernel/epapr_hcalls.S    |   2 +
 arch/powerpc/kernel/fpu.S             |   3 +
 arch/powerpc/kernel/head_32.S         |   5 +
 arch/powerpc/kernel/head_40x.S        |   2 +
 arch/powerpc/kernel/head_44x.S        |   2 +
 arch/powerpc/kernel/head_64.S         |   2 +
 arch/powerpc/kernel/head_8xx.S        |   2 +
 arch/powerpc/kernel/head_fsl_booke.S  |   2 +
 arch/powerpc/kernel/misc.S            |   2 +
 arch/powerpc/kernel/misc_32.S         |  10 ++
 arch/powerpc/kernel/misc_64.S         |   4 +
 arch/powerpc/kernel/pci-common.c      |   1 +
 arch/powerpc/kernel/pci_32.c          |   2 +
 arch/powerpc/kernel/ppc_ksyms.c       |  37 -------
 arch/powerpc/kernel/ppc_ksyms_32.c    |  60 -----------
 arch/powerpc/kernel/setup_32.c        |   6 ++
 arch/powerpc/kernel/time.c            |   1 +
 arch/powerpc/kernel/vector.S          |   3 +
 arch/powerpc/lib/Makefile             |   2 +-
 arch/powerpc/lib/checksum_32.S        |   3 +
 arch/powerpc/lib/checksum_64.S        |   3 +
 arch/powerpc/lib/copy_32.S            |   5 +
 arch/powerpc/lib/copypage_64.S        |   2 +
 arch/powerpc/lib/copyuser_64.S        |   2 +
 arch/powerpc/lib/hweight_64.S         |   5 +
 arch/powerpc/lib/mem_64.S             |   3 +
 arch/powerpc/lib/memcmp_64.S          |   2 +
 arch/powerpc/lib/memcpy_64.S          |   2 +
 arch/powerpc/lib/ppc_ksyms.c          |  29 ------
 arch/powerpc/lib/string.S             |   6 ++
 arch/powerpc/lib/string_64.S          |   2 +
 arch/powerpc/mm/hash_low_32.S         |   3 +
 arch/powerpc/relocs_check.sh          |   4 +-
 arch/powerpc/sysdev/dcr-low.S         |   3 +
 arch/s390/include/asm/Kbuild          |   1 +
 arch/s390/kernel/Makefile             |   2 +-
 arch/s390/kernel/entry.S              |   6 ++
 arch/s390/kernel/mcount.S             |   3 +
 arch/s390/kernel/s390_ksyms.c         |  15 ---
 arch/s390/lib/mem.S                   |   3 +
 arch/sparc/include/asm/Kbuild         |   1 +
 arch/sparc/include/asm/string.h       |  34 +++++++
 arch/sparc/include/asm/string_32.h    |  56 -----------
 arch/sparc/include/asm/string_64.h    |  44 --------
 arch/sparc/kernel/Makefile            |   2 +-
 arch/sparc/kernel/entry.S             |   3 +
 arch/sparc/kernel/head_32.S           |   3 +
 arch/sparc/kernel/head_64.S           |   7 +-
 arch/sparc/kernel/helpers.S           |   2 +
 arch/sparc/kernel/hvcalls.S           |   5 +
 arch/sparc/kernel/sparc_ksyms.c       |  12 +++
 arch/sparc/kernel/sparc_ksyms_32.c    |  31 ------
 arch/sparc/kernel/sparc_ksyms_64.c    |  53 ----------
 arch/sparc/lib/Makefile               |   1 -
 arch/sparc/lib/U1memcpy.S             |   2 +
 arch/sparc/lib/VISsave.S              |   2 +
 arch/sparc/lib/ashldi3.S              |   2 +
 arch/sparc/lib/ashrdi3.S              |   2 +
 arch/sparc/lib/atomic_64.S            |  16 ++-
 arch/sparc/lib/bitops.S               |   7 ++
 arch/sparc/lib/blockops.S             |   3 +
 arch/sparc/lib/bzero.S                |   4 +
 arch/sparc/lib/checksum_32.S          |   3 +
 arch/sparc/lib/checksum_64.S          |   2 +
 arch/sparc/lib/clear_page.S           |   3 +
 arch/sparc/lib/copy_in_user.S         |   2 +
 arch/sparc/lib/copy_page.S            |   2 +
 arch/sparc/lib/copy_user.S            |   2 +
 arch/sparc/lib/csum_copy.S            |   3 +
 arch/sparc/lib/divdi3.S               |   2 +
 arch/sparc/lib/ffs.S                  |   3 +
 arch/sparc/lib/hweight.S              |   5 +
 arch/sparc/lib/ipcsum.S               |   2 +
 arch/sparc/lib/ksyms.c                | 174 --------------------------------
 arch/sparc/lib/locks.S                |   5 +
 arch/sparc/lib/lshrdi3.S              |   2 +
 arch/sparc/lib/mcount.S               |   2 +
 arch/sparc/lib/memcmp.S               |   2 +
 arch/sparc/lib/memcpy.S               |  86 +---------------
 arch/sparc/lib/memmove.S              |   2 +
 arch/sparc/lib/memscan_32.S           |   4 +
 arch/sparc/lib/memscan_64.S           |   4 +
 arch/sparc/lib/memset.S               |   3 +
 arch/sparc/lib/muldi3.S               |   2 +
 arch/sparc/lib/strlen.S               |   2 +
 arch/sparc/lib/strncmp_32.S           |   2 +
 arch/sparc/lib/strncmp_64.S           |   2 +
 arch/sparc/lib/xor.S                  |   9 ++
 arch/x86/entry/entry_32.S             |   2 +
 arch/x86/entry/entry_64.S             |   2 +
 arch/x86/entry/thunk_32.S             |   3 +
 arch/x86/entry/thunk_64.S             |   3 +
 arch/x86/include/asm/export.h         |   4 +
 arch/x86/kernel/Makefile              |   4 +-
 arch/x86/kernel/head_32.S             |   2 +
 arch/x86/kernel/head_64.S             |   3 +
 arch/x86/kernel/i386_ksyms_32.c       |  47 ---------
 arch/x86/kernel/mcount_64.S           |   2 +
 arch/x86/kernel/x8664_ksyms_64.c      |  85 ----------------
 arch/x86/lib/checksum_32.S            |   3 +
 arch/x86/lib/clear_page_64.S          |   2 +
 arch/x86/lib/cmpxchg8b_emu.S          |   2 +
 arch/x86/lib/copy_page_64.S           |   2 +
 arch/x86/lib/copy_user_64.S           |   8 ++
 arch/x86/lib/csum-partial_64.c        |   1 +
 arch/x86/lib/getuser.S                |   5 +
 arch/x86/lib/hweight.S                |   3 +
 arch/x86/lib/memcpy_64.S              |   4 +
 arch/x86/lib/memmove_64.S             |   3 +
 arch/x86/lib/memset_64.S              |   3 +
 arch/x86/lib/putuser.S                |   5 +
 arch/x86/lib/strstr_32.c              |   3 +-
 arch/x86/um/Makefile                  |   2 +-
 arch/x86/um/checksum_32.S             |   2 +
 arch/x86/um/ksyms.c                   |  13 ---
 include/asm-generic/export.h          |  94 +++++++++++++++++
 include/asm-generic/vmlinux.lds.h     |  57 ++++++-----
 include/linux/compiler.h              |  23 +++++
 include/linux/export.h                |  30 +++---
 include/linux/init.h                  |  38 +++----
 init/Makefile                         |   2 +
 scripts/Makefile.build                |  43 +++++++-
 scripts/Makefile.modpost              |  14 ++-
 scripts/basic/fixdep.c                |  86 ++++++----------
 scripts/gen_initramfs_list.sh         |   5 +-
 scripts/genksyms/lex.l                |  35 ++++---
 scripts/genksyms/lex.lex.c_shipped    |  35 ++++---
 scripts/link-vmlinux.sh               |  71 +++++++++++--
 262 files changed, 1094 insertions(+), 1403 deletions(-)
 delete mode 100644 arch/alpha/kernel/alpha_ksyms.c
 delete mode 100644 arch/arm/kernel/armksyms.c
 delete mode 100644 arch/arm/mach-imx/ssi-fiq-ksym.c
 create mode 100644 arch/ia64/include/asm/export.h
 create mode 100644 arch/m68k/include/asm/export.h
 delete mode 100644 arch/m68k/kernel/m68k_ksyms.c
 delete mode 100644 arch/powerpc/kernel/ppc_ksyms.c
 delete mode 100644 arch/powerpc/kernel/ppc_ksyms_32.c
 delete mode 100644 arch/powerpc/lib/ppc_ksyms.c
 delete mode 100644 arch/s390/kernel/s390_ksyms.c
 create mode 100644 arch/sparc/kernel/sparc_ksyms.c
 delete mode 100644 arch/sparc/kernel/sparc_ksyms_32.c
 delete mode 100644 arch/sparc/kernel/sparc_ksyms_64.c
 delete mode 100644 arch/sparc/lib/ksyms.c
 create mode 100644 arch/x86/include/asm/export.h
 delete mode 100644 arch/x86/kernel/i386_ksyms_32.c
 delete mode 100644 arch/x86/kernel/x8664_ksyms_64.c
 delete mode 100644 arch/x86/um/ksyms.c
 create mode 100644 include/asm-generic/export.h