* AF9013/15 I2C problems
@ 2010-10-17 10:47 dave cunningham
2010-10-17 15:42 ` Antti Palosaari
0 siblings, 1 reply; 3+ messages in thread
From: dave cunningham @ 2010-10-17 10:47 UTC (permalink / raw)
To: linux-media
A few months ago I switched systems and started having problems with a
pair of WT-220U sticks
<http://www.spinics.net/lists/linux-media/msg22309.html>.
I got nowhere with this problem so gave up changing to a pair of AT9015
sticks.
I started with a Tevion DK-5203 using firmware 4.65.
I have no problems in this configuration.
I then added a KWorld 399U. On insertion I got a kernel message saying
firmware 4.95 is required so I switched to this.
Now neither stick works correctly (either individually or with the other
stick).
At boot things are fine and I can use either stick (and both tuners on
the 399U).
At some point however I get a flood of message in the syslog like this:
Oct 16 18:43:18 beta dhcpd: DHCPACK on 192.168.0.9 to 00:1c:c0:8c:88:7d via eth0
Oct 16 19:47:10 beta kernel: [ 8510.288055] af9013: I2C write failed reg:ae00 len:1
Oct 16 19:47:14 beta kernel: [ 8514.312050] af9013: I2C read failed reg:d330
Oct 16 19:47:18 beta kernel: [ 8518.336048] af9013: I2C read failed reg:9bee
Oct 16 19:47:22 beta kernel: [ 8522.360053] af9013: I2C read failed reg:d330
Oct 16 19:47:26 beta kernel: [ 8526.384054] af9013: I2C read failed reg:d330
Oct 16 19:47:31 beta kernel: [ 8530.408060] af9013: I2C read failed reg:d330
Oct 16 19:47:35 beta kernel: [ 8534.432060] af9013: I2C read failed reg:9bee
Oct 16 19:47:39 beta kernel: [ 8538.456051] af9013: I2C read failed reg:d330
Oct 16 19:47:43 beta kernel: [ 8542.480055] af9013: I2C read failed reg:d330
Oct 16 19:47:47 beta kernel: [ 8546.504050] af9013: I2C read failed reg:d330
Oct 16 19:47:51 beta kernel: [ 8550.528048] af9013: I2C read failed reg:9bee
Oct 16 19:47:55 beta kernel: [ 8554.552056] af9013: I2C read failed reg:d330
Oct 16 19:47:59 beta kernel: [ 8558.576062] af9013: I2C read failed reg:d330
Oct 16 19:48:03 beta kernel: [ 8562.600056] af9013: I2C read failed reg:d330
Oct 16 19:48:07 beta kernel: [ 8566.624074] af9013: I2C read failed reg:9bee
Oct 16 19:48:11 beta kernel: [ 8570.648052] af9013: I2C read failed reg:d330
Oct 16 19:48:15 beta kernel: [ 8574.672053] af9013: I2C read failed reg:d330
Oct 16 19:48:19 beta kernel: [ 8578.696059] af9013: I2C read failed reg:d330
Oct 16 19:48:23 beta kernel: [ 8582.720039] af9013: I2C read failed reg:9bee
Oct 16 19:48:27 beta kernel: [ 8586.744056] af9013: I2C read failed reg:d330
Oct 16 19:48:31 beta kernel: [ 8590.768039] af9013: I2C read failed reg:d330
Oct 16 19:48:35 beta kernel: [ 8594.792053] af9013: I2C read failed reg:d330
Oct 16 19:48:39 beta kernel: [ 8598.816066] af9013: I2C read failed reg:9bee
Oct 16 19:48:43 beta kernel: [ 8602.840054] af9013: I2C read failed reg:9bee
Oct 16 19:48:47 beta kernel: [ 8606.864133] af9013: I2C read failed reg:d330
Oct 16 19:48:51 beta kernel: [ 8610.888106] af9013: I2C write failed reg:ae00 len:1
Oct 16 19:48:55 beta kernel: [ 8614.912052] af9013: I2C read failed reg:9bee
Oct 16 19:48:59 beta kernel: [ 8618.936056] af9013: I2C read failed reg:9bee
The host machine has now slowed to a crawl and I have to remove the
stick(s) and reboot to recover.
I'm currently on hg version <14319:37581bb7e6f1>, on a debian-squeeze
system, kernel 2.6.32.
I've googled and found various people seeing similar problems but have
yet to come across a solution.
Would anyone have any suggestions (note if I switch back to firmware
4.65 with just the Tevion stick things are fine - I'd like to use the
KWorld stick if possible though)?
Thanks,
--
Dave Cunningham dave at upsilon org uk
PGP KEY ID: 0xA78636DC
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: AF9013/15 I2C problems
2010-10-17 10:47 AF9013/15 I2C problems dave cunningham
@ 2010-10-17 15:42 ` Antti Palosaari
2010-10-19 23:23 ` dave cunningham
0 siblings, 1 reply; 3+ messages in thread
From: Antti Palosaari @ 2010-10-17 15:42 UTC (permalink / raw)
To: dave cunningham; +Cc: linux-media
On 10/17/2010 01:47 PM, dave cunningham wrote:
> I'm currently on hg version <14319:37581bb7e6f1>, on a debian-squeeze
> system, kernel 2.6.32.
>
> I've googled and found various people seeing similar problems but have
> yet to come across a solution.
>
> Would anyone have any suggestions (note if I switch back to firmware
> 4.65 with just the Tevion stick things are fine - I'd like to use the
> KWorld stick if possible though)?
I have strong feeling this issue is fixed already. Install latest Git
master driver from Linuxtv.org
Antti
--
http://palosaari.fi/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: AF9013/15 I2C problems
2010-10-17 15:42 ` Antti Palosaari
@ 2010-10-19 23:23 ` dave cunningham
0 siblings, 0 replies; 3+ messages in thread
From: dave cunningham @ 2010-10-19 23:23 UTC (permalink / raw)
To: Antti Palosaari; +Cc: linux-media
In message <4CBB1982.4050309@iki.fi>, Antti Palosaari wrote
>On 10/17/2010 01:47 PM, dave cunningham wrote:
>> I'm currently on hg version <14319:37581bb7e6f1>, on a debian-squeeze
>> system, kernel 2.6.32.
>>
>> I've googled and found various people seeing similar problems but have
>> yet to come across a solution.
>>
>> Would anyone have any suggestions (note if I switch back to firmware
>> 4.65 with just the Tevion stick things are fine - I'd like to use the
>> KWorld stick if possible though)?
>
>I have strong feeling this issue is fixed already. Install latest Git
>master driver from Linuxtv.org
>
I've compiled the git media-master, commit
<1c8c51f7413ec522c7b729c8ebc5ce815fb7d4a8> and still have problems.
With the Tevion Stick I now see the following at boot (with both
firmware 4.65.0 and 4.95.0):
[ 6.257795] DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)...
[ 6.264875] TDA18271HD/C1 detected @ 1-00c0
[ 6.902293] af9015: command failed:1
[ 6.902789] tda18271_write_regs: [1-00c0|M] ERROR: idx = 0x0, len = 39, i2c_t
ransfer returned: -1
[ 7.540215] af9015: command failed:1
[ 7.540707] tda18271_write_regs: [1-00c0|M] ERROR: idx = 0x20, len = 1, i2c_t
ransfer returned: -1
[ 8.178133] af9015: command failed:1
[ 8.178747] tda18271_write_regs: [1-00c0|M] ERROR: idx = 0x20, len = 1, i2c_t
ransfer returned: -1
[ 8.816417] af9015: command failed:1
[ 8.817039] tda18271_write_regs: [1-00c0|M] ERROR: idx = 0x20, len = 1, i2c_transfer returned: -1
[ 9.454467] af9015: command failed:1
[ 9.455080] tda18271_write_regs: [1-00c0|M] ERROR: idx = 0x20, len = 1, i2c_transfer returned: -1
[ 10.092508] af9015: command failed:1
[ 10.093122] tda18271_write_regs: [1-00c0|M] ERROR: idx = 0x23, len = 1, i2c_transfer returned: -1
[ 10.730542] af9015: command failed:1
...
The KWorld stick comes up OK and can be used but after changing
channels/sources a few times in mythtv I get (firmware 4.95.0):
Oct 19 23:52:32 beta dhcpd: DHCPACK on 192.168.0.9 to 00:1c:c0:8c:88:7d via eth0
Oct 19 23:58:04 beta kernel: [ 480.140076] af9013: I2C read failed reg:d507
Oct 19 23:58:06 beta kernel: [ 482.152089] af9013: I2C read failed reg:d507
Oct 19 23:58:08 beta kernel: [ 484.164077] af9013: I2C read failed reg:d507
Oct 19 23:58:10 beta kernel: [ 486.176076] af9013: I2C read failed reg:d507
Oct 19 23:58:12 beta kernel: [ 488.188128] af9013: I2C read failed reg:d507
...
--
Dave Cunningham dave at upsilon org uk
PGP KEY ID: 0xA78636DC
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-10-19 23:24 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-10-17 10:47 AF9013/15 I2C problems dave cunningham
2010-10-17 15:42 ` Antti Palosaari
2010-10-19 23:23 ` dave cunningham
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.