* 2.6 Support for MyCable XXS1500 board?
@ 2004-03-16 15:11 Marcel Beltz
2004-03-16 19:20 ` Pete Popov
0 siblings, 1 reply; 2+ messages in thread
From: Marcel Beltz @ 2004-03-16 15:11 UTC (permalink / raw)
To: linux-mips
hello,
i am a newbie on this list. i want to run a 2.6 kernel on a xxs1500
board. is there a working configuration? i run successfully a 2.4.21
kernel and i don't know how to convert the .config file.
regards
marcel beltz
--
marcel beltz
beltz.info email: marcel@beltz.info
milchberg 21 fon: +49 177 736 787 1
86150 augsburg
++
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: 2.6 Support for MyCable XXS1500 board?
2004-03-16 15:11 2.6 Support for MyCable XXS1500 board? Marcel Beltz
@ 2004-03-16 19:20 ` Pete Popov
0 siblings, 0 replies; 2+ messages in thread
From: Pete Popov @ 2004-03-16 19:20 UTC (permalink / raw)
To: Marcel Beltz; +Cc: Linux MIPS mailing list
On Tue, 2004-03-16 at 07:11, Marcel Beltz wrote:
> hello,
>
> i am a newbie on this list. i want to run a 2.6 kernel on a xxs1500
> board. is there a working configuration? i run successfully a 2.4.21
> kernel and i don't know how to convert the .config file.
The board has been updated but not tested. Right now I have the Db1500
and Pb1500 booting, but not all drivers are up to date yet. I recently
updated the pcmcia driver but haven't updated all the board files. The
XXS1500 might not boot without some minor work, but it should be pretty
trivial to get it running. There is an alpha 36 bit address support
patch in ftp.linux-mips.org:/pub/linux/mips/people/ppopov/2.6 that you
must apply. The PCI bus on the 1500 and the pcmcia driver worked fine
with it. If you're looking for production quality kernel, the 2.6 Au1x
is not there yet.
Pete
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-03-16 19:19 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-03-16 15:11 2.6 Support for MyCable XXS1500 board? Marcel Beltz
2004-03-16 19:20 ` Pete Popov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.