[PATCH v6 1/2] PCI: Add a helper to check Power Resource Requirements _PR3 existence

[PATCH v6 1/2] PCI: Add a helper to check Power Resource Requirements _PR3 existence

[Kai-Heng Feng]

A driver may want to know the existence of _PR3, to choose different
runtime suspend behavior. A user will be add in next patch.

This is mostly the same as nouveau_pr3_present().

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
v6:
- Only define the function when CONFIG_ACPI is set.
v5:
- Add wording suggestion from Bjorn.
v4:
- Let caller to find its upstream port device.

 drivers/pci/pci.c   | 18 ++++++++++++++++++
 include/linux/pci.h |  2 ++
 2 files changed, 20 insertions(+)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e7982af9a5d8..1df99d9e350e 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -5856,6 +5856,24 @@ int pci_set_vga_state(struct pci_dev *dev, bool decode,
 	return 0;
 }
 
+#ifdef CONFIG_ACPI
+bool pci_pr3_present(struct pci_dev *pdev)
+{
+	struct acpi_device *adev;
+
+	if (acpi_disabled)
+		return false;
+
+	adev = ACPI_COMPANION(&pdev->dev);
+	if (!adev)
+		return false;
+
+	return adev->power.flags.power_resources &&
+		acpi_has_method(adev->handle, "_PR3");
+}
+EXPORT_SYMBOL_GPL(pci_pr3_present);
+#endif
+
 /**
  * pci_add_dma_alias - Add a DMA devfn alias for a device
  * @dev: the PCI device for which alias is added
diff --git a/include/linux/pci.h b/include/linux/pci.h
index f9088c89a534..1d15c5d49cdd 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -2310,9 +2310,11 @@ struct irq_domain *pci_host_bridge_acpi_msi_domain(struct pci_bus *bus);
 
 void
 pci_msi_register_fwnode_provider(struct fwnode_handle *(*fn)(struct device *));
+bool pci_pr3_present(struct pci_dev *pdev);
 #else
 static inline struct irq_domain *
 pci_host_bridge_acpi_msi_domain(struct pci_bus *bus) { return NULL; }
+static bool pci_pr3_present(struct pci_dev *pdev) { return false; }
 #endif
 
 #ifdef CONFIG_EEH
-- 
2.17.1

[alsa-devel] [PATCH v6 1/2] PCI: Add a helper to check Power Resource Requirements _PR3 existence

[Kai-Heng Feng]

A driver may want to know the existence of _PR3, to choose different
runtime suspend behavior. A user will be add in next patch.

This is mostly the same as nouveau_pr3_present().

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
v6:
- Only define the function when CONFIG_ACPI is set.
v5:
- Add wording suggestion from Bjorn.
v4:
- Let caller to find its upstream port device.

 drivers/pci/pci.c   | 18 ++++++++++++++++++
 include/linux/pci.h |  2 ++
 2 files changed, 20 insertions(+)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e7982af9a5d8..1df99d9e350e 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -5856,6 +5856,24 @@ int pci_set_vga_state(struct pci_dev *dev, bool decode,
 	return 0;
 }
 
+#ifdef CONFIG_ACPI
+bool pci_pr3_present(struct pci_dev *pdev)
+{
+	struct acpi_device *adev;
+
+	if (acpi_disabled)
+		return false;
+
+	adev = ACPI_COMPANION(&pdev->dev);
+	if (!adev)
+		return false;
+
+	return adev->power.flags.power_resources &&
+		acpi_has_method(adev->handle, "_PR3");
+}
+EXPORT_SYMBOL_GPL(pci_pr3_present);
+#endif
+
 /**
  * pci_add_dma_alias - Add a DMA devfn alias for a device
  * @dev: the PCI device for which alias is added
diff --git a/include/linux/pci.h b/include/linux/pci.h
index f9088c89a534..1d15c5d49cdd 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -2310,9 +2310,11 @@ struct irq_domain *pci_host_bridge_acpi_msi_domain(struct pci_bus *bus);
 
 void
 pci_msi_register_fwnode_provider(struct fwnode_handle *(*fn)(struct device *));
+bool pci_pr3_present(struct pci_dev *pdev);
 #else
 static inline struct irq_domain *
 pci_host_bridge_acpi_msi_domain(struct pci_bus *bus) { return NULL; }
+static bool pci_pr3_present(struct pci_dev *pdev) { return false; }
 #endif
 
 #ifdef CONFIG_EEH
-- 
2.17.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[PATCH v6 2/2] ALSA: hda: Allow HDA to be runtime suspended when dGPU is not bound to a driver

[Kai-Heng Feng]

Nvidia proprietary driver doesn't support runtime power management, so
when a user only wants to use the integrated GPU, it's a common practice
to let dGPU not to bind any driver, and let its upstream port to be
runtime suspended. At the end of runtime suspension the port uses
platform power management to disable power through _OFF method of power
resource, which is listed by _PR3.

After commit b516ea586d71 ("PCI: Enable NVIDIA HDA controllers"), when
the dGPU comes with an HDA function, the HDA won't be suspended if the
dGPU is unbound, so the power resource can't be turned off by its
upstream port driver.

Commit 37a3a98ef601 ("ALSA: hda - Enable runtime PM only for
discrete GPU") only allows HDA to be runtime suspended once GPU is
bound, to keep APU's HDA working.

However, HDA on dGPU isn't that useful if dGPU is not bound to any
driver.  So let's relax the runtime suspend requirement for dGPU's HDA
function, to disable the power source to save lots of power.

BugLink: https://bugs.launchpad.net/bugs/1840835
Fixes: b516ea586d71 ("PCI: Enable NVIDIA HDA controllers")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
v5, v6:
- No change.
v4:
- Find upstream port, it's callee's responsibility now.
v3:
- Make changelog more clear.
v2:
- Change wording.
- Rebase to Tiwai's branch.
 sound/pci/hda/hda_intel.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 240f4ca76391..e63b871343e5 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1280,11 +1280,17 @@ static void init_vga_switcheroo(struct azx *chip)
 {
 	struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
 	struct pci_dev *p = get_bound_vga(chip->pci);
+	struct pci_dev *parent;
 	if (p) {
 		dev_info(chip->card->dev,
 			 "Handle vga_switcheroo audio client\n");
 		hda->use_vga_switcheroo = 1;
-		chip->bus.keep_power = 1; /* cleared in either gpu_bound op or codec probe */
+
+		/* cleared in either gpu_bound op or codec probe, or when its
+		 * upstream port has _PR3 (i.e. dGPU).
+		 */
+		parent = pci_upstream_bridge(p);
+		chip->bus.keep_power = parent ? !pci_pr3_present(parent) : 1;
 		chip->driver_caps |= AZX_DCAPS_PM_RUNTIME;
 		pci_dev_put(p);
 	}
-- 
2.17.1

[alsa-devel] [PATCH v6 2/2] ALSA: hda: Allow HDA to be runtime suspended when dGPU is not bound to a driver

[Kai-Heng Feng]

Nvidia proprietary driver doesn't support runtime power management, so
when a user only wants to use the integrated GPU, it's a common practice
to let dGPU not to bind any driver, and let its upstream port to be
runtime suspended. At the end of runtime suspension the port uses
platform power management to disable power through _OFF method of power
resource, which is listed by _PR3.

After commit b516ea586d71 ("PCI: Enable NVIDIA HDA controllers"), when
the dGPU comes with an HDA function, the HDA won't be suspended if the
dGPU is unbound, so the power resource can't be turned off by its
upstream port driver.

Commit 37a3a98ef601 ("ALSA: hda - Enable runtime PM only for
discrete GPU") only allows HDA to be runtime suspended once GPU is
bound, to keep APU's HDA working.

However, HDA on dGPU isn't that useful if dGPU is not bound to any
driver.  So let's relax the runtime suspend requirement for dGPU's HDA
function, to disable the power source to save lots of power.

BugLink: https://bugs.launchpad.net/bugs/1840835
Fixes: b516ea586d71 ("PCI: Enable NVIDIA HDA controllers")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
v5, v6:
- No change.
v4:
- Find upstream port, it's callee's responsibility now.
v3:
- Make changelog more clear.
v2:
- Change wording.
- Rebase to Tiwai's branch.
 sound/pci/hda/hda_intel.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 240f4ca76391..e63b871343e5 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1280,11 +1280,17 @@ static void init_vga_switcheroo(struct azx *chip)
 {
 	struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
 	struct pci_dev *p = get_bound_vga(chip->pci);
+	struct pci_dev *parent;
 	if (p) {
 		dev_info(chip->card->dev,
 			 "Handle vga_switcheroo audio client\n");
 		hda->use_vga_switcheroo = 1;
-		chip->bus.keep_power = 1; /* cleared in either gpu_bound op or codec probe */
+
+		/* cleared in either gpu_bound op or codec probe, or when its
+		 * upstream port has _PR3 (i.e. dGPU).
+		 */
+		parent = pci_upstream_bridge(p);
+		chip->bus.keep_power = parent ? !pci_pr3_present(parent) : 1;
 		chip->driver_caps |= AZX_DCAPS_PM_RUNTIME;
 		pci_dev_put(p);
 	}
-- 
2.17.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: [alsa-devel] [PATCH v6 2/2] ALSA: hda: Allow HDA to be runtime suspended when dGPU is not bound to a driver

[Jaroslav Kysela]

Dne 18. 10. 19 v 9:38 Kai-Heng Feng napsal(a):
> Nvidia proprietary driver doesn't support runtime power management, so
> when a user only wants to use the integrated GPU, it's a common practice
> to let dGPU not to bind any driver, and let its upstream port to be
> runtime suspended. At the end of runtime suspension the port uses
> platform power management to disable power through _OFF method of power
> resource, which is listed by _PR3.
> 
> After commit b516ea586d71 ("PCI: Enable NVIDIA HDA controllers"), when
> the dGPU comes with an HDA function, the HDA won't be suspended if the
> dGPU is unbound, so the power resource can't be turned off by its
> upstream port driver.
> 
> Commit 37a3a98ef601 ("ALSA: hda - Enable runtime PM only for
> discrete GPU") only allows HDA to be runtime suspended once GPU is
> bound, to keep APU's HDA working.
> 
> However, HDA on dGPU isn't that useful if dGPU is not bound to any
> driver.  So let's relax the runtime suspend requirement for dGPU's HDA
> function, to disable the power source to save lots of power.

This patch breaks the HDMI audio detection at least on some platforms (Lenovo 
P50 for example) with nouveau and the proprietary nvidia driver. Those laptops 
have the external HDMI/DP ports connected to dGPU instead the iGPU. The ACPI 
PR3 is set.

The runtime PM off fixes this problem:

echo on > /sys/bus/pci/devices/0000\:01\:00.1/power/control

But I don't think that it's the best solution. My proposal is to create a pr3 
check blacklist to keep power for the HDMI audio for those machines. Also we 
may add a new module parameter for snd-hda-intel to control this. Other ideas?

					Jaroslav


> BugLink: https://bugs.launchpad.net/bugs/1840835
> Fixes: b516ea586d71 ("PCI: Enable NVIDIA HDA controllers")
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> ---
> v5, v6:
> - No change.
> v4:
> - Find upstream port, it's callee's responsibility now.
> v3:
> - Make changelog more clear.
> v2:
> - Change wording.
> - Rebase to Tiwai's branch.
>   sound/pci/hda/hda_intel.c | 8 +++++++-
>   1 file changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
> index 240f4ca76391..e63b871343e5 100644
> --- a/sound/pci/hda/hda_intel.c
> +++ b/sound/pci/hda/hda_intel.c
> @@ -1280,11 +1280,17 @@ static void init_vga_switcheroo(struct azx *chip)
>   {
>   	struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
>   	struct pci_dev *p = get_bound_vga(chip->pci);
> +	struct pci_dev *parent;
>   	if (p) {
>   		dev_info(chip->card->dev,
>   			 "Handle vga_switcheroo audio client\n");
>   		hda->use_vga_switcheroo = 1;
> -		chip->bus.keep_power = 1; /* cleared in either gpu_bound op or codec probe */
> +
> +		/* cleared in either gpu_bound op or codec probe, or when its
> +		 * upstream port has _PR3 (i.e. dGPU).
> +		 */
> +		parent = pci_upstream_bridge(p);
> +		chip->bus.keep_power = parent ? !pci_pr3_present(parent) : 1;
>   		chip->driver_caps |= AZX_DCAPS_PM_RUNTIME;
>   		pci_dev_put(p);
>   	}
> 


-- 
Jaroslav Kysela <perex@perex.cz>
Linux Sound Maintainer; ALSA Project; Red Hat, Inc.

Re: [alsa-devel] [PATCH v6 2/2] ALSA: hda: Allow HDA to be runtime suspended when dGPU is not bound to a driver

[Jaroslav Kysela]

Dne 18. 10. 19 v 9:38 Kai-Heng Feng napsal(a):
> Nvidia proprietary driver doesn't support runtime power management, so
> when a user only wants to use the integrated GPU, it's a common practice
> to let dGPU not to bind any driver, and let its upstream port to be
> runtime suspended. At the end of runtime suspension the port uses
> platform power management to disable power through _OFF method of power
> resource, which is listed by _PR3.
> 
> After commit b516ea586d71 ("PCI: Enable NVIDIA HDA controllers"), when
> the dGPU comes with an HDA function, the HDA won't be suspended if the
> dGPU is unbound, so the power resource can't be turned off by its
> upstream port driver.
> 
> Commit 37a3a98ef601 ("ALSA: hda - Enable runtime PM only for
> discrete GPU") only allows HDA to be runtime suspended once GPU is
> bound, to keep APU's HDA working.
> 
> However, HDA on dGPU isn't that useful if dGPU is not bound to any
> driver.  So let's relax the runtime suspend requirement for dGPU's HDA
> function, to disable the power source to save lots of power.

This patch breaks the HDMI audio detection at least on some platforms (Lenovo 
P50 for example) with nouveau and the proprietary nvidia driver. Those laptops 
have the external HDMI/DP ports connected to dGPU instead the iGPU. The ACPI 
PR3 is set.

The runtime PM off fixes this problem:

echo on > /sys/bus/pci/devices/0000\:01\:00.1/power/control

But I don't think that it's the best solution. My proposal is to create a pr3 
check blacklist to keep power for the HDMI audio for those machines. Also we 
may add a new module parameter for snd-hda-intel to control this. Other ideas?

					Jaroslav


> BugLink: https://bugs.launchpad.net/bugs/1840835
> Fixes: b516ea586d71 ("PCI: Enable NVIDIA HDA controllers")
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> ---
> v5, v6:
> - No change.
> v4:
> - Find upstream port, it's callee's responsibility now.
> v3:
> - Make changelog more clear.
> v2:
> - Change wording.
> - Rebase to Tiwai's branch.
>   sound/pci/hda/hda_intel.c | 8 +++++++-
>   1 file changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
> index 240f4ca76391..e63b871343e5 100644
> --- a/sound/pci/hda/hda_intel.c
> +++ b/sound/pci/hda/hda_intel.c
> @@ -1280,11 +1280,17 @@ static void init_vga_switcheroo(struct azx *chip)
>   {
>   	struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
>   	struct pci_dev *p = get_bound_vga(chip->pci);
> +	struct pci_dev *parent;
>   	if (p) {
>   		dev_info(chip->card->dev,
>   			 "Handle vga_switcheroo audio client\n");
>   		hda->use_vga_switcheroo = 1;
> -		chip->bus.keep_power = 1; /* cleared in either gpu_bound op or codec probe */
> +
> +		/* cleared in either gpu_bound op or codec probe, or when its
> +		 * upstream port has _PR3 (i.e. dGPU).
> +		 */
> +		parent = pci_upstream_bridge(p);
> +		chip->bus.keep_power = parent ? !pci_pr3_present(parent) : 1;
>   		chip->driver_caps |= AZX_DCAPS_PM_RUNTIME;
>   		pci_dev_put(p);
>   	}
> 


-- 
Jaroslav Kysela <perex@perex.cz>
Linux Sound Maintainer; ALSA Project; Red Hat, Inc.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: [alsa-devel] [PATCH v6 2/2] ALSA: hda: Allow HDA to be runtime suspended when dGPU is not bound to a driver

[Takashi Iwai]

On Fri, 10 Jan 2020 10:43:26 +0100,
Jaroslav Kysela wrote:
> 
> Dne 18. 10. 19 v 9:38 Kai-Heng Feng napsal(a):
> > Nvidia proprietary driver doesn't support runtime power management, so
> > when a user only wants to use the integrated GPU, it's a common practice
> > to let dGPU not to bind any driver, and let its upstream port to be
> > runtime suspended. At the end of runtime suspension the port uses
> > platform power management to disable power through _OFF method of power
> > resource, which is listed by _PR3.
> >
> > After commit b516ea586d71 ("PCI: Enable NVIDIA HDA controllers"), when
> > the dGPU comes with an HDA function, the HDA won't be suspended if the
> > dGPU is unbound, so the power resource can't be turned off by its
> > upstream port driver.
> >
> > Commit 37a3a98ef601 ("ALSA: hda - Enable runtime PM only for
> > discrete GPU") only allows HDA to be runtime suspended once GPU is
> > bound, to keep APU's HDA working.
> >
> > However, HDA on dGPU isn't that useful if dGPU is not bound to any
> > driver.  So let's relax the runtime suspend requirement for dGPU's HDA
> > function, to disable the power source to save lots of power.
> 
> This patch breaks the HDMI audio detection at least on some platforms
> (Lenovo P50 for example) with nouveau and the proprietary nvidia
> driver. Those laptops have the external HDMI/DP ports connected to
> dGPU instead the iGPU. The ACPI PR3 is set.
> 
> The runtime PM off fixes this problem:
> 
> echo on > /sys/bus/pci/devices/0000\:01\:00.1/power/control

But this will keep the power of the graphics chip on, and that's what
the patch was supposed to "fix".

> But I don't think that it's the best solution. My proposal is to
> create a pr3 check blacklist to keep power for the HDMI audio for
> those machines. Also we may add a new module parameter for
> snd-hda-intel to control this. Other ideas?

For nouveau, the best fix is to merge the audio component patch.
This will make things working without fiddling with the power
up/down.  The patch has been pending over months under review in DRM
side, unfortunately...  Please pinging them for driving ahead.

For Nvidia, though, it's no path a binary-only stuff can go with, due
to the GPL symbol of the component framework.  Those guys know of it
well, and they seem adding the temporary power up/down procedure by
poking the proc file from the user-space side at the HDMI connection.

About a module option: I don't think it's much better than the sysfs
toggle.  You can set up a simple udev rule if needed, too.


thanks,

Takashi

> 
> 					Jaroslav
> 
> 
> > BugLink: https://bugs.launchpad.net/bugs/1840835
> > Fixes: b516ea586d71 ("PCI: Enable NVIDIA HDA controllers")
> > Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> > ---
> > v5, v6:
> > - No change.
> > v4:
> > - Find upstream port, it's callee's responsibility now.
> > v3:
> > - Make changelog more clear.
> > v2:
> > - Change wording.
> > - Rebase to Tiwai's branch.
> >   sound/pci/hda/hda_intel.c | 8 +++++++-
> >   1 file changed, 7 insertions(+), 1 deletion(-)
> >
> > diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
> > index 240f4ca76391..e63b871343e5 100644
> > --- a/sound/pci/hda/hda_intel.c
> > +++ b/sound/pci/hda/hda_intel.c
> > @@ -1280,11 +1280,17 @@ static void init_vga_switcheroo(struct azx *chip)
> >   {
> >   	struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
> >   	struct pci_dev *p = get_bound_vga(chip->pci);
> > +	struct pci_dev *parent;
> >   	if (p) {
> >   		dev_info(chip->card->dev,
> >   			 "Handle vga_switcheroo audio client\n");
> >   		hda->use_vga_switcheroo = 1;
> > -		chip->bus.keep_power = 1; /* cleared in either gpu_bound op or codec probe */
> > +
> > +		/* cleared in either gpu_bound op or codec probe, or when its
> > +		 * upstream port has _PR3 (i.e. dGPU).
> > +		 */
> > +		parent = pci_upstream_bridge(p);
> > +		chip->bus.keep_power = parent ? !pci_pr3_present(parent) : 1;
> >   		chip->driver_caps |= AZX_DCAPS_PM_RUNTIME;
> >   		pci_dev_put(p);
> >   	}
> >
> 
> 
> -- 
> Jaroslav Kysela <perex@perex.cz>
> Linux Sound Maintainer; ALSA Project; Red Hat, Inc.
> 

Re: [alsa-devel] [PATCH v6 2/2] ALSA: hda: Allow HDA to be runtime suspended when dGPU is not bound to a driver

[Takashi Iwai]

On Fri, 10 Jan 2020 10:43:26 +0100,
Jaroslav Kysela wrote:
> 
> Dne 18. 10. 19 v 9:38 Kai-Heng Feng napsal(a):
> > Nvidia proprietary driver doesn't support runtime power management, so
> > when a user only wants to use the integrated GPU, it's a common practice
> > to let dGPU not to bind any driver, and let its upstream port to be
> > runtime suspended. At the end of runtime suspension the port uses
> > platform power management to disable power through _OFF method of power
> > resource, which is listed by _PR3.
> >
> > After commit b516ea586d71 ("PCI: Enable NVIDIA HDA controllers"), when
> > the dGPU comes with an HDA function, the HDA won't be suspended if the
> > dGPU is unbound, so the power resource can't be turned off by its
> > upstream port driver.
> >
> > Commit 37a3a98ef601 ("ALSA: hda - Enable runtime PM only for
> > discrete GPU") only allows HDA to be runtime suspended once GPU is
> > bound, to keep APU's HDA working.
> >
> > However, HDA on dGPU isn't that useful if dGPU is not bound to any
> > driver.  So let's relax the runtime suspend requirement for dGPU's HDA
> > function, to disable the power source to save lots of power.
> 
> This patch breaks the HDMI audio detection at least on some platforms
> (Lenovo P50 for example) with nouveau and the proprietary nvidia
> driver. Those laptops have the external HDMI/DP ports connected to
> dGPU instead the iGPU. The ACPI PR3 is set.
> 
> The runtime PM off fixes this problem:
> 
> echo on > /sys/bus/pci/devices/0000\:01\:00.1/power/control

But this will keep the power of the graphics chip on, and that's what
the patch was supposed to "fix".

> But I don't think that it's the best solution. My proposal is to
> create a pr3 check blacklist to keep power for the HDMI audio for
> those machines. Also we may add a new module parameter for
> snd-hda-intel to control this. Other ideas?

For nouveau, the best fix is to merge the audio component patch.
This will make things working without fiddling with the power
up/down.  The patch has been pending over months under review in DRM
side, unfortunately...  Please pinging them for driving ahead.

For Nvidia, though, it's no path a binary-only stuff can go with, due
to the GPL symbol of the component framework.  Those guys know of it
well, and they seem adding the temporary power up/down procedure by
poking the proc file from the user-space side at the HDMI connection.

About a module option: I don't think it's much better than the sysfs
toggle.  You can set up a simple udev rule if needed, too.


thanks,

Takashi

> 
> 					Jaroslav
> 
> 
> > BugLink: https://bugs.launchpad.net/bugs/1840835
> > Fixes: b516ea586d71 ("PCI: Enable NVIDIA HDA controllers")
> > Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> > ---
> > v5, v6:
> > - No change.
> > v4:
> > - Find upstream port, it's callee's responsibility now.
> > v3:
> > - Make changelog more clear.
> > v2:
> > - Change wording.
> > - Rebase to Tiwai's branch.
> >   sound/pci/hda/hda_intel.c | 8 +++++++-
> >   1 file changed, 7 insertions(+), 1 deletion(-)
> >
> > diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
> > index 240f4ca76391..e63b871343e5 100644
> > --- a/sound/pci/hda/hda_intel.c
> > +++ b/sound/pci/hda/hda_intel.c
> > @@ -1280,11 +1280,17 @@ static void init_vga_switcheroo(struct azx *chip)
> >   {
> >   	struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
> >   	struct pci_dev *p = get_bound_vga(chip->pci);
> > +	struct pci_dev *parent;
> >   	if (p) {
> >   		dev_info(chip->card->dev,
> >   			 "Handle vga_switcheroo audio client\n");
> >   		hda->use_vga_switcheroo = 1;
> > -		chip->bus.keep_power = 1; /* cleared in either gpu_bound op or codec probe */
> > +
> > +		/* cleared in either gpu_bound op or codec probe, or when its
> > +		 * upstream port has _PR3 (i.e. dGPU).
> > +		 */
> > +		parent = pci_upstream_bridge(p);
> > +		chip->bus.keep_power = parent ? !pci_pr3_present(parent) : 1;
> >   		chip->driver_caps |= AZX_DCAPS_PM_RUNTIME;
> >   		pci_dev_put(p);
> >   	}
> >
> 
> 
> -- 
> Jaroslav Kysela <perex@perex.cz>
> Linux Sound Maintainer; ALSA Project; Red Hat, Inc.
> 
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: [alsa-devel] [PATCH v6 2/2] ALSA: hda: Allow HDA to be runtime suspended when dGPU is not bound to a driver

[Jaroslav Kysela]

Dne 10. 01. 20 v 10:56 Takashi Iwai napsal(a):
> On Fri, 10 Jan 2020 10:43:26 +0100,
> Jaroslav Kysela wrote:
>>
>> Dne 18. 10. 19 v 9:38 Kai-Heng Feng napsal(a):
>>> Nvidia proprietary driver doesn't support runtime power management, so
>>> when a user only wants to use the integrated GPU, it's a common practice
>>> to let dGPU not to bind any driver, and let its upstream port to be
>>> runtime suspended. At the end of runtime suspension the port uses
>>> platform power management to disable power through _OFF method of power
>>> resource, which is listed by _PR3.
>>>
>>> After commit b516ea586d71 ("PCI: Enable NVIDIA HDA controllers"), when
>>> the dGPU comes with an HDA function, the HDA won't be suspended if the
>>> dGPU is unbound, so the power resource can't be turned off by its
>>> upstream port driver.
>>>
>>> Commit 37a3a98ef601 ("ALSA: hda - Enable runtime PM only for
>>> discrete GPU") only allows HDA to be runtime suspended once GPU is
>>> bound, to keep APU's HDA working.
>>>
>>> However, HDA on dGPU isn't that useful if dGPU is not bound to any
>>> driver.  So let's relax the runtime suspend requirement for dGPU's HDA
>>> function, to disable the power source to save lots of power.
>>
>> This patch breaks the HDMI audio detection at least on some platforms
>> (Lenovo P50 for example) with nouveau and the proprietary nvidia
>> driver. Those laptops have the external HDMI/DP ports connected to
>> dGPU instead the iGPU. The ACPI PR3 is set.
>>
>> The runtime PM off fixes this problem:
>>
>> echo on > /sys/bus/pci/devices/0000\:01\:00.1/power/control
> 
> But this will keep the power of the graphics chip on, and that's what
> the patch was supposed to "fix".
> 
>> But I don't think that it's the best solution. My proposal is to
>> create a pr3 check blacklist to keep power for the HDMI audio for
>> those machines. Also we may add a new module parameter for
>> snd-hda-intel to control this. Other ideas?
> 
> For nouveau, the best fix is to merge the audio component patch.
> This will make things working without fiddling with the power
> up/down.  The patch has been pending over months under review in DRM
> side, unfortunately...  Please pinging them for driving ahead.

Adding Cc: to dri-devel. You probably mean this thread:

https://lists.freedesktop.org/archives/dri-devel/2019-July/thread.html#227423

> For Nvidia, though, it's no path a binary-only stuff can go with, due
> to the GPL symbol of the component framework.  Those guys know of it
> well, and they seem adding the temporary power up/down procedure by
> poking the proc file from the user-space side at the HDMI connection.

Wow.

> About a module option: I don't think it's much better than the sysfs
> toggle.  You can set up a simple udev rule if needed, too.

Ok, it's a bit nightmare to maintain those extra settings in the distribution.

					Jaroslav

> 
> 
> thanks,
> 
> Takashi
> 
>>
>> 					Jaroslav
>>
>>
>>> BugLink: https://bugs.launchpad.net/bugs/1840835
>>> Fixes: b516ea586d71 ("PCI: Enable NVIDIA HDA controllers")
>>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
>>> ---
>>> v5, v6:
>>> - No change.
>>> v4:
>>> - Find upstream port, it's callee's responsibility now.
>>> v3:
>>> - Make changelog more clear.
>>> v2:
>>> - Change wording.
>>> - Rebase to Tiwai's branch.
>>>    sound/pci/hda/hda_intel.c | 8 +++++++-
>>>    1 file changed, 7 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
>>> index 240f4ca76391..e63b871343e5 100644
>>> --- a/sound/pci/hda/hda_intel.c
>>> +++ b/sound/pci/hda/hda_intel.c
>>> @@ -1280,11 +1280,17 @@ static void init_vga_switcheroo(struct azx *chip)
>>>    {
>>>    	struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
>>>    	struct pci_dev *p = get_bound_vga(chip->pci);
>>> +	struct pci_dev *parent;
>>>    	if (p) {
>>>    		dev_info(chip->card->dev,
>>>    			 "Handle vga_switcheroo audio client\n");
>>>    		hda->use_vga_switcheroo = 1;
>>> -		chip->bus.keep_power = 1; /* cleared in either gpu_bound op or codec probe */
>>> +
>>> +		/* cleared in either gpu_bound op or codec probe, or when its
>>> +		 * upstream port has _PR3 (i.e. dGPU).
>>> +		 */
>>> +		parent = pci_upstream_bridge(p);
>>> +		chip->bus.keep_power = parent ? !pci_pr3_present(parent) : 1;
>>>    		chip->driver_caps |= AZX_DCAPS_PM_RUNTIME;
>>>    		pci_dev_put(p);
>>>    	}
>>>
>>
>>
>> -- 
>> Jaroslav Kysela <perex@perex.cz>
>> Linux Sound Maintainer; ALSA Project; Red Hat, Inc.
>>


-- 
Jaroslav Kysela <perex@perex.cz>
Linux Sound Maintainer; ALSA Project; Red Hat, Inc.

Re: [alsa-devel] [PATCH v6 2/2] ALSA: hda: Allow HDA to be runtime suspended when dGPU is not bound to a driver

[Jaroslav Kysela]

Dne 10. 01. 20 v 10:56 Takashi Iwai napsal(a):
> On Fri, 10 Jan 2020 10:43:26 +0100,
> Jaroslav Kysela wrote:
>>
>> Dne 18. 10. 19 v 9:38 Kai-Heng Feng napsal(a):
>>> Nvidia proprietary driver doesn't support runtime power management, so
>>> when a user only wants to use the integrated GPU, it's a common practice
>>> to let dGPU not to bind any driver, and let its upstream port to be
>>> runtime suspended. At the end of runtime suspension the port uses
>>> platform power management to disable power through _OFF method of power
>>> resource, which is listed by _PR3.
>>>
>>> After commit b516ea586d71 ("PCI: Enable NVIDIA HDA controllers"), when
>>> the dGPU comes with an HDA function, the HDA won't be suspended if the
>>> dGPU is unbound, so the power resource can't be turned off by its
>>> upstream port driver.
>>>
>>> Commit 37a3a98ef601 ("ALSA: hda - Enable runtime PM only for
>>> discrete GPU") only allows HDA to be runtime suspended once GPU is
>>> bound, to keep APU's HDA working.
>>>
>>> However, HDA on dGPU isn't that useful if dGPU is not bound to any
>>> driver.  So let's relax the runtime suspend requirement for dGPU's HDA
>>> function, to disable the power source to save lots of power.
>>
>> This patch breaks the HDMI audio detection at least on some platforms
>> (Lenovo P50 for example) with nouveau and the proprietary nvidia
>> driver. Those laptops have the external HDMI/DP ports connected to
>> dGPU instead the iGPU. The ACPI PR3 is set.
>>
>> The runtime PM off fixes this problem:
>>
>> echo on > /sys/bus/pci/devices/0000\:01\:00.1/power/control
> 
> But this will keep the power of the graphics chip on, and that's what
> the patch was supposed to "fix".
> 
>> But I don't think that it's the best solution. My proposal is to
>> create a pr3 check blacklist to keep power for the HDMI audio for
>> those machines. Also we may add a new module parameter for
>> snd-hda-intel to control this. Other ideas?
> 
> For nouveau, the best fix is to merge the audio component patch.
> This will make things working without fiddling with the power
> up/down.  The patch has been pending over months under review in DRM
> side, unfortunately...  Please pinging them for driving ahead.

Adding Cc: to dri-devel. You probably mean this thread:

https://lists.freedesktop.org/archives/dri-devel/2019-July/thread.html#227423

> For Nvidia, though, it's no path a binary-only stuff can go with, due
> to the GPL symbol of the component framework.  Those guys know of it
> well, and they seem adding the temporary power up/down procedure by
> poking the proc file from the user-space side at the HDMI connection.

Wow.

> About a module option: I don't think it's much better than the sysfs
> toggle.  You can set up a simple udev rule if needed, too.

Ok, it's a bit nightmare to maintain those extra settings in the distribution.

					Jaroslav

> 
> 
> thanks,
> 
> Takashi
> 
>>
>> 					Jaroslav
>>
>>
>>> BugLink: https://bugs.launchpad.net/bugs/1840835
>>> Fixes: b516ea586d71 ("PCI: Enable NVIDIA HDA controllers")
>>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
>>> ---
>>> v5, v6:
>>> - No change.
>>> v4:
>>> - Find upstream port, it's callee's responsibility now.
>>> v3:
>>> - Make changelog more clear.
>>> v2:
>>> - Change wording.
>>> - Rebase to Tiwai's branch.
>>>    sound/pci/hda/hda_intel.c | 8 +++++++-
>>>    1 file changed, 7 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
>>> index 240f4ca76391..e63b871343e5 100644
>>> --- a/sound/pci/hda/hda_intel.c
>>> +++ b/sound/pci/hda/hda_intel.c
>>> @@ -1280,11 +1280,17 @@ static void init_vga_switcheroo(struct azx *chip)
>>>    {
>>>    	struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
>>>    	struct pci_dev *p = get_bound_vga(chip->pci);
>>> +	struct pci_dev *parent;
>>>    	if (p) {
>>>    		dev_info(chip->card->dev,
>>>    			 "Handle vga_switcheroo audio client\n");
>>>    		hda->use_vga_switcheroo = 1;
>>> -		chip->bus.keep_power = 1; /* cleared in either gpu_bound op or codec probe */
>>> +
>>> +		/* cleared in either gpu_bound op or codec probe, or when its
>>> +		 * upstream port has _PR3 (i.e. dGPU).
>>> +		 */
>>> +		parent = pci_upstream_bridge(p);
>>> +		chip->bus.keep_power = parent ? !pci_pr3_present(parent) : 1;
>>>    		chip->driver_caps |= AZX_DCAPS_PM_RUNTIME;
>>>    		pci_dev_put(p);
>>>    	}
>>>
>>
>>
>> -- 
>> Jaroslav Kysela <perex@perex.cz>
>> Linux Sound Maintainer; ALSA Project; Red Hat, Inc.
>>


-- 
Jaroslav Kysela <perex@perex.cz>
Linux Sound Maintainer; ALSA Project; Red Hat, Inc.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [alsa-devel] [PATCH v6 2/2] ALSA: hda: Allow HDA to be runtime suspended when dGPU is not bound to a driver

[Jaroslav Kysela]

Dne 10. 01. 20 v 10:56 Takashi Iwai napsal(a):
> On Fri, 10 Jan 2020 10:43:26 +0100,
> Jaroslav Kysela wrote:
>>
>> Dne 18. 10. 19 v 9:38 Kai-Heng Feng napsal(a):
>>> Nvidia proprietary driver doesn't support runtime power management, so
>>> when a user only wants to use the integrated GPU, it's a common practice
>>> to let dGPU not to bind any driver, and let its upstream port to be
>>> runtime suspended. At the end of runtime suspension the port uses
>>> platform power management to disable power through _OFF method of power
>>> resource, which is listed by _PR3.
>>>
>>> After commit b516ea586d71 ("PCI: Enable NVIDIA HDA controllers"), when
>>> the dGPU comes with an HDA function, the HDA won't be suspended if the
>>> dGPU is unbound, so the power resource can't be turned off by its
>>> upstream port driver.
>>>
>>> Commit 37a3a98ef601 ("ALSA: hda - Enable runtime PM only for
>>> discrete GPU") only allows HDA to be runtime suspended once GPU is
>>> bound, to keep APU's HDA working.
>>>
>>> However, HDA on dGPU isn't that useful if dGPU is not bound to any
>>> driver.  So let's relax the runtime suspend requirement for dGPU's HDA
>>> function, to disable the power source to save lots of power.
>>
>> This patch breaks the HDMI audio detection at least on some platforms
>> (Lenovo P50 for example) with nouveau and the proprietary nvidia
>> driver. Those laptops have the external HDMI/DP ports connected to
>> dGPU instead the iGPU. The ACPI PR3 is set.
>>
>> The runtime PM off fixes this problem:
>>
>> echo on > /sys/bus/pci/devices/0000\:01\:00.1/power/control
> 
> But this will keep the power of the graphics chip on, and that's what
> the patch was supposed to "fix".
> 
>> But I don't think that it's the best solution. My proposal is to
>> create a pr3 check blacklist to keep power for the HDMI audio for
>> those machines. Also we may add a new module parameter for
>> snd-hda-intel to control this. Other ideas?
> 
> For nouveau, the best fix is to merge the audio component patch.
> This will make things working without fiddling with the power
> up/down.  The patch has been pending over months under review in DRM
> side, unfortunately...  Please pinging them for driving ahead.

Adding Cc: to dri-devel. You probably mean this thread:

https://lists.freedesktop.org/archives/dri-devel/2019-July/thread.html#227423

> For Nvidia, though, it's no path a binary-only stuff can go with, due
> to the GPL symbol of the component framework.  Those guys know of it
> well, and they seem adding the temporary power up/down procedure by
> poking the proc file from the user-space side at the HDMI connection.

Wow.

> About a module option: I don't think it's much better than the sysfs
> toggle.  You can set up a simple udev rule if needed, too.

Ok, it's a bit nightmare to maintain those extra settings in the distribution.

					Jaroslav

> 
> 
> thanks,
> 
> Takashi
> 
>>
>> 					Jaroslav
>>
>>
>>> BugLink: https://bugs.launchpad.net/bugs/1840835
>>> Fixes: b516ea586d71 ("PCI: Enable NVIDIA HDA controllers")
>>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
>>> ---
>>> v5, v6:
>>> - No change.
>>> v4:
>>> - Find upstream port, it's callee's responsibility now.
>>> v3:
>>> - Make changelog more clear.
>>> v2:
>>> - Change wording.
>>> - Rebase to Tiwai's branch.
>>>    sound/pci/hda/hda_intel.c | 8 +++++++-
>>>    1 file changed, 7 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
>>> index 240f4ca76391..e63b871343e5 100644
>>> --- a/sound/pci/hda/hda_intel.c
>>> +++ b/sound/pci/hda/hda_intel.c
>>> @@ -1280,11 +1280,17 @@ static void init_vga_switcheroo(struct azx *chip)
>>>    {
>>>    	struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
>>>    	struct pci_dev *p = get_bound_vga(chip->pci);
>>> +	struct pci_dev *parent;
>>>    	if (p) {
>>>    		dev_info(chip->card->dev,
>>>    			 "Handle vga_switcheroo audio client\n");
>>>    		hda->use_vga_switcheroo = 1;
>>> -		chip->bus.keep_power = 1; /* cleared in either gpu_bound op or codec probe */
>>> +
>>> +		/* cleared in either gpu_bound op or codec probe, or when its
>>> +		 * upstream port has _PR3 (i.e. dGPU).
>>> +		 */
>>> +		parent = pci_upstream_bridge(p);
>>> +		chip->bus.keep_power = parent ? !pci_pr3_present(parent) : 1;
>>>    		chip->driver_caps |= AZX_DCAPS_PM_RUNTIME;
>>>    		pci_dev_put(p);
>>>    	}
>>>
>>
>>
>> -- 
>> Jaroslav Kysela <perex@perex.cz>
>> Linux Sound Maintainer; ALSA Project; Red Hat, Inc.
>>


-- 
Jaroslav Kysela <perex@perex.cz>
Linux Sound Maintainer; ALSA Project; Red Hat, Inc.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: [PATCH v6 1/2] PCI: Add a helper to check Power Resource Requirements _PR3 existence

[Takashi Iwai]

On Fri, 18 Oct 2019 09:38:47 +0200,
Kai-Heng Feng wrote:
> 
> A driver may want to know the existence of _PR3, to choose different
> runtime suspend behavior. A user will be add in next patch.
> 
> This is mostly the same as nouveau_pr3_present().
> 
> Reported-by: kbuild test robot <lkp@intel.com>

It's confusing -- this particular change isn't reported by the test
bot, but only about the lack of the CONFIG_ACPI ifdef.


thanks,

Takashi

> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> ---
> v6:
> - Only define the function when CONFIG_ACPI is set.
> v5:
> - Add wording suggestion from Bjorn.
> v4:
> - Let caller to find its upstream port device.
> 
>  drivers/pci/pci.c   | 18 ++++++++++++++++++
>  include/linux/pci.h |  2 ++
>  2 files changed, 20 insertions(+)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index e7982af9a5d8..1df99d9e350e 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -5856,6 +5856,24 @@ int pci_set_vga_state(struct pci_dev *dev, bool decode,
>  	return 0;
>  }
>  
> +#ifdef CONFIG_ACPI
> +bool pci_pr3_present(struct pci_dev *pdev)
> +{
> +	struct acpi_device *adev;
> +
> +	if (acpi_disabled)
> +		return false;
> +
> +	adev = ACPI_COMPANION(&pdev->dev);
> +	if (!adev)
> +		return false;
> +
> +	return adev->power.flags.power_resources &&
> +		acpi_has_method(adev->handle, "_PR3");
> +}
> +EXPORT_SYMBOL_GPL(pci_pr3_present);
> +#endif
> +
>  /**
>   * pci_add_dma_alias - Add a DMA devfn alias for a device
>   * @dev: the PCI device for which alias is added
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index f9088c89a534..1d15c5d49cdd 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -2310,9 +2310,11 @@ struct irq_domain *pci_host_bridge_acpi_msi_domain(struct pci_bus *bus);
>  
>  void
>  pci_msi_register_fwnode_provider(struct fwnode_handle *(*fn)(struct device *));
> +bool pci_pr3_present(struct pci_dev *pdev);
>  #else
>  static inline struct irq_domain *
>  pci_host_bridge_acpi_msi_domain(struct pci_bus *bus) { return NULL; }
> +static bool pci_pr3_present(struct pci_dev *pdev) { return false; }
>  #endif
>  
>  #ifdef CONFIG_EEH
> -- 
> 2.17.1
> 

Re: [alsa-devel] [PATCH v6 1/2] PCI: Add a helper to check Power Resource Requirements _PR3 existence

[Takashi Iwai]

On Fri, 18 Oct 2019 09:38:47 +0200,
Kai-Heng Feng wrote:
> 
> A driver may want to know the existence of _PR3, to choose different
> runtime suspend behavior. A user will be add in next patch.
> 
> This is mostly the same as nouveau_pr3_present().
> 
> Reported-by: kbuild test robot <lkp@intel.com>

It's confusing -- this particular change isn't reported by the test
bot, but only about the lack of the CONFIG_ACPI ifdef.


thanks,

Takashi

> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> ---
> v6:
> - Only define the function when CONFIG_ACPI is set.
> v5:
> - Add wording suggestion from Bjorn.
> v4:
> - Let caller to find its upstream port device.
> 
>  drivers/pci/pci.c   | 18 ++++++++++++++++++
>  include/linux/pci.h |  2 ++
>  2 files changed, 20 insertions(+)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index e7982af9a5d8..1df99d9e350e 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -5856,6 +5856,24 @@ int pci_set_vga_state(struct pci_dev *dev, bool decode,
>  	return 0;
>  }
>  
> +#ifdef CONFIG_ACPI
> +bool pci_pr3_present(struct pci_dev *pdev)
> +{
> +	struct acpi_device *adev;
> +
> +	if (acpi_disabled)
> +		return false;
> +
> +	adev = ACPI_COMPANION(&pdev->dev);
> +	if (!adev)
> +		return false;
> +
> +	return adev->power.flags.power_resources &&
> +		acpi_has_method(adev->handle, "_PR3");
> +}
> +EXPORT_SYMBOL_GPL(pci_pr3_present);
> +#endif
> +
>  /**
>   * pci_add_dma_alias - Add a DMA devfn alias for a device
>   * @dev: the PCI device for which alias is added
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index f9088c89a534..1d15c5d49cdd 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -2310,9 +2310,11 @@ struct irq_domain *pci_host_bridge_acpi_msi_domain(struct pci_bus *bus);
>  
>  void
>  pci_msi_register_fwnode_provider(struct fwnode_handle *(*fn)(struct device *));
> +bool pci_pr3_present(struct pci_dev *pdev);
>  #else
>  static inline struct irq_domain *
>  pci_host_bridge_acpi_msi_domain(struct pci_bus *bus) { return NULL; }
> +static bool pci_pr3_present(struct pci_dev *pdev) { return false; }
>  #endif
>  
>  #ifdef CONFIG_EEH
> -- 
> 2.17.1
> 
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: [PATCH v6 1/2] PCI: Add a helper to check Power Resource Requirements _PR3 existence

[Kai-Heng Feng]

> On Oct 18, 2019, at 16:18, Takashi Iwai <tiwai@suse.de> wrote:
> 
> On Fri, 18 Oct 2019 09:38:47 +0200,
> Kai-Heng Feng wrote:
>> 
>> A driver may want to know the existence of _PR3, to choose different
>> runtime suspend behavior. A user will be add in next patch.
>> 
>> This is mostly the same as nouveau_pr3_present().
>> 
>> Reported-by: kbuild test robot <lkp@intel.com>
> 
> It's confusing -- this particular change isn't reported by the test
> bot, but only about the lack of the CONFIG_ACPI ifdef.

Hmm, because the test bot asked to add the tag.
If it's not appropriate will you drop it? I can also send a v7.

Kai-Heng

> 
> 
> thanks,
> 
> Takashi
> 
>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
>> ---
>> v6:
>> - Only define the function when CONFIG_ACPI is set.
>> v5:
>> - Add wording suggestion from Bjorn.
>> v4:
>> - Let caller to find its upstream port device.
>> 
>> drivers/pci/pci.c   | 18 ++++++++++++++++++
>> include/linux/pci.h |  2 ++
>> 2 files changed, 20 insertions(+)
>> 
>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>> index e7982af9a5d8..1df99d9e350e 100644
>> --- a/drivers/pci/pci.c
>> +++ b/drivers/pci/pci.c
>> @@ -5856,6 +5856,24 @@ int pci_set_vga_state(struct pci_dev *dev, bool decode,
>> 	return 0;
>> }
>> 
>> +#ifdef CONFIG_ACPI
>> +bool pci_pr3_present(struct pci_dev *pdev)
>> +{
>> +	struct acpi_device *adev;
>> +
>> +	if (acpi_disabled)
>> +		return false;
>> +
>> +	adev = ACPI_COMPANION(&pdev->dev);
>> +	if (!adev)
>> +		return false;
>> +
>> +	return adev->power.flags.power_resources &&
>> +		acpi_has_method(adev->handle, "_PR3");
>> +}
>> +EXPORT_SYMBOL_GPL(pci_pr3_present);
>> +#endif
>> +
>> /**
>>  * pci_add_dma_alias - Add a DMA devfn alias for a device
>>  * @dev: the PCI device for which alias is added
>> diff --git a/include/linux/pci.h b/include/linux/pci.h
>> index f9088c89a534..1d15c5d49cdd 100644
>> --- a/include/linux/pci.h
>> +++ b/include/linux/pci.h
>> @@ -2310,9 +2310,11 @@ struct irq_domain *pci_host_bridge_acpi_msi_domain(struct pci_bus *bus);
>> 
>> void
>> pci_msi_register_fwnode_provider(struct fwnode_handle *(*fn)(struct device *));
>> +bool pci_pr3_present(struct pci_dev *pdev);
>> #else
>> static inline struct irq_domain *
>> pci_host_bridge_acpi_msi_domain(struct pci_bus *bus) { return NULL; }
>> +static bool pci_pr3_present(struct pci_dev *pdev) { return false; }
>> #endif
>> 
>> #ifdef CONFIG_EEH
>> -- 
>> 2.17.1
>> 

Re: [alsa-devel] [PATCH v6 1/2] PCI: Add a helper to check Power Resource Requirements _PR3 existence

[Kai-Heng Feng]

> On Oct 18, 2019, at 16:18, Takashi Iwai <tiwai@suse.de> wrote:
> 
> On Fri, 18 Oct 2019 09:38:47 +0200,
> Kai-Heng Feng wrote:
>> 
>> A driver may want to know the existence of _PR3, to choose different
>> runtime suspend behavior. A user will be add in next patch.
>> 
>> This is mostly the same as nouveau_pr3_present().
>> 
>> Reported-by: kbuild test robot <lkp@intel.com>
> 
> It's confusing -- this particular change isn't reported by the test
> bot, but only about the lack of the CONFIG_ACPI ifdef.

Hmm, because the test bot asked to add the tag.
If it's not appropriate will you drop it? I can also send a v7.

Kai-Heng

> 
> 
> thanks,
> 
> Takashi
> 
>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
>> ---
>> v6:
>> - Only define the function when CONFIG_ACPI is set.
>> v5:
>> - Add wording suggestion from Bjorn.
>> v4:
>> - Let caller to find its upstream port device.
>> 
>> drivers/pci/pci.c   | 18 ++++++++++++++++++
>> include/linux/pci.h |  2 ++
>> 2 files changed, 20 insertions(+)
>> 
>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>> index e7982af9a5d8..1df99d9e350e 100644
>> --- a/drivers/pci/pci.c
>> +++ b/drivers/pci/pci.c
>> @@ -5856,6 +5856,24 @@ int pci_set_vga_state(struct pci_dev *dev, bool decode,
>> 	return 0;
>> }
>> 
>> +#ifdef CONFIG_ACPI
>> +bool pci_pr3_present(struct pci_dev *pdev)
>> +{
>> +	struct acpi_device *adev;
>> +
>> +	if (acpi_disabled)
>> +		return false;
>> +
>> +	adev = ACPI_COMPANION(&pdev->dev);
>> +	if (!adev)
>> +		return false;
>> +
>> +	return adev->power.flags.power_resources &&
>> +		acpi_has_method(adev->handle, "_PR3");
>> +}
>> +EXPORT_SYMBOL_GPL(pci_pr3_present);
>> +#endif
>> +
>> /**
>>  * pci_add_dma_alias - Add a DMA devfn alias for a device
>>  * @dev: the PCI device for which alias is added
>> diff --git a/include/linux/pci.h b/include/linux/pci.h
>> index f9088c89a534..1d15c5d49cdd 100644
>> --- a/include/linux/pci.h
>> +++ b/include/linux/pci.h
>> @@ -2310,9 +2310,11 @@ struct irq_domain *pci_host_bridge_acpi_msi_domain(struct pci_bus *bus);
>> 
>> void
>> pci_msi_register_fwnode_provider(struct fwnode_handle *(*fn)(struct device *));
>> +bool pci_pr3_present(struct pci_dev *pdev);
>> #else
>> static inline struct irq_domain *
>> pci_host_bridge_acpi_msi_domain(struct pci_bus *bus) { return NULL; }
>> +static bool pci_pr3_present(struct pci_dev *pdev) { return false; }
>> #endif
>> 
>> #ifdef CONFIG_EEH
>> -- 
>> 2.17.1
>> 

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: [PATCH v6 1/2] PCI: Add a helper to check Power Resource Requirements _PR3 existence

[Takashi Iwai]

On Fri, 18 Oct 2019 10:30:11 +0200,
Kai-Heng Feng wrote:
> 
> 
> 
> > On Oct 18, 2019, at 16:18, Takashi Iwai <tiwai@suse.de> wrote:
> > 
> > On Fri, 18 Oct 2019 09:38:47 +0200,
> > Kai-Heng Feng wrote:
> >> 
> >> A driver may want to know the existence of _PR3, to choose different
> >> runtime suspend behavior. A user will be add in next patch.
> >> 
> >> This is mostly the same as nouveau_pr3_present().
> >> 
> >> Reported-by: kbuild test robot <lkp@intel.com>
> > 
> > It's confusing -- this particular change isn't reported by the test
> > bot, but only about the lack of the CONFIG_ACPI ifdef.
> 
> Hmm, because the test bot asked to add the tag.

Yes, but it's only if you add a new fix patch on top of it.
You can write some their credit, too, but basically it'd be enough to
point to the Link tag to the thread.

> If it's not appropriate will you drop it? I can also send a v7.

I can modify in my side.


thanks,

Takashi

> 
> Kai-Heng
> 
> > 
> > 
> > thanks,
> > 
> > Takashi
> > 
> >> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> >> ---
> >> v6:
> >> - Only define the function when CONFIG_ACPI is set.
> >> v5:
> >> - Add wording suggestion from Bjorn.
> >> v4:
> >> - Let caller to find its upstream port device.
> >> 
> >> drivers/pci/pci.c   | 18 ++++++++++++++++++
> >> include/linux/pci.h |  2 ++
> >> 2 files changed, 20 insertions(+)
> >> 
> >> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> >> index e7982af9a5d8..1df99d9e350e 100644
> >> --- a/drivers/pci/pci.c
> >> +++ b/drivers/pci/pci.c
> >> @@ -5856,6 +5856,24 @@ int pci_set_vga_state(struct pci_dev *dev, bool decode,
> >> 	return 0;
> >> }
> >> 
> >> +#ifdef CONFIG_ACPI
> >> +bool pci_pr3_present(struct pci_dev *pdev)
> >> +{
> >> +	struct acpi_device *adev;
> >> +
> >> +	if (acpi_disabled)
> >> +		return false;
> >> +
> >> +	adev = ACPI_COMPANION(&pdev->dev);
> >> +	if (!adev)
> >> +		return false;
> >> +
> >> +	return adev->power.flags.power_resources &&
> >> +		acpi_has_method(adev->handle, "_PR3");
> >> +}
> >> +EXPORT_SYMBOL_GPL(pci_pr3_present);
> >> +#endif
> >> +
> >> /**
> >>  * pci_add_dma_alias - Add a DMA devfn alias for a device
> >>  * @dev: the PCI device for which alias is added
> >> diff --git a/include/linux/pci.h b/include/linux/pci.h
> >> index f9088c89a534..1d15c5d49cdd 100644
> >> --- a/include/linux/pci.h
> >> +++ b/include/linux/pci.h
> >> @@ -2310,9 +2310,11 @@ struct irq_domain *pci_host_bridge_acpi_msi_domain(struct pci_bus *bus);
> >> 
> >> void
> >> pci_msi_register_fwnode_provider(struct fwnode_handle *(*fn)(struct device *));
> >> +bool pci_pr3_present(struct pci_dev *pdev);
> >> #else
> >> static inline struct irq_domain *
> >> pci_host_bridge_acpi_msi_domain(struct pci_bus *bus) { return NULL; }
> >> +static bool pci_pr3_present(struct pci_dev *pdev) { return false; }
> >> #endif
> >> 
> >> #ifdef CONFIG_EEH
> >> -- 
> >> 2.17.1
> >> 
> 

Re: [alsa-devel] [PATCH v6 1/2] PCI: Add a helper to check Power Resource Requirements _PR3 existence

[Takashi Iwai]

On Fri, 18 Oct 2019 10:30:11 +0200,
Kai-Heng Feng wrote:
> 
> 
> 
> > On Oct 18, 2019, at 16:18, Takashi Iwai <tiwai@suse.de> wrote:
> > 
> > On Fri, 18 Oct 2019 09:38:47 +0200,
> > Kai-Heng Feng wrote:
> >> 
> >> A driver may want to know the existence of _PR3, to choose different
> >> runtime suspend behavior. A user will be add in next patch.
> >> 
> >> This is mostly the same as nouveau_pr3_present().
> >> 
> >> Reported-by: kbuild test robot <lkp@intel.com>
> > 
> > It's confusing -- this particular change isn't reported by the test
> > bot, but only about the lack of the CONFIG_ACPI ifdef.
> 
> Hmm, because the test bot asked to add the tag.

Yes, but it's only if you add a new fix patch on top of it.
You can write some their credit, too, but basically it'd be enough to
point to the Link tag to the thread.

> If it's not appropriate will you drop it? I can also send a v7.

I can modify in my side.


thanks,

Takashi

> 
> Kai-Heng
> 
> > 
> > 
> > thanks,
> > 
> > Takashi
> > 
> >> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> >> ---
> >> v6:
> >> - Only define the function when CONFIG_ACPI is set.
> >> v5:
> >> - Add wording suggestion from Bjorn.
> >> v4:
> >> - Let caller to find its upstream port device.
> >> 
> >> drivers/pci/pci.c   | 18 ++++++++++++++++++
> >> include/linux/pci.h |  2 ++
> >> 2 files changed, 20 insertions(+)
> >> 
> >> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> >> index e7982af9a5d8..1df99d9e350e 100644
> >> --- a/drivers/pci/pci.c
> >> +++ b/drivers/pci/pci.c
> >> @@ -5856,6 +5856,24 @@ int pci_set_vga_state(struct pci_dev *dev, bool decode,
> >> 	return 0;
> >> }
> >> 
> >> +#ifdef CONFIG_ACPI
> >> +bool pci_pr3_present(struct pci_dev *pdev)
> >> +{
> >> +	struct acpi_device *adev;
> >> +
> >> +	if (acpi_disabled)
> >> +		return false;
> >> +
> >> +	adev = ACPI_COMPANION(&pdev->dev);
> >> +	if (!adev)
> >> +		return false;
> >> +
> >> +	return adev->power.flags.power_resources &&
> >> +		acpi_has_method(adev->handle, "_PR3");
> >> +}
> >> +EXPORT_SYMBOL_GPL(pci_pr3_present);
> >> +#endif
> >> +
> >> /**
> >>  * pci_add_dma_alias - Add a DMA devfn alias for a device
> >>  * @dev: the PCI device for which alias is added
> >> diff --git a/include/linux/pci.h b/include/linux/pci.h
> >> index f9088c89a534..1d15c5d49cdd 100644
> >> --- a/include/linux/pci.h
> >> +++ b/include/linux/pci.h
> >> @@ -2310,9 +2310,11 @@ struct irq_domain *pci_host_bridge_acpi_msi_domain(struct pci_bus *bus);
> >> 
> >> void
> >> pci_msi_register_fwnode_provider(struct fwnode_handle *(*fn)(struct device *));
> >> +bool pci_pr3_present(struct pci_dev *pdev);
> >> #else
> >> static inline struct irq_domain *
> >> pci_host_bridge_acpi_msi_domain(struct pci_bus *bus) { return NULL; }
> >> +static bool pci_pr3_present(struct pci_dev *pdev) { return false; }
> >> #endif
> >> 
> >> #ifdef CONFIG_EEH
> >> -- 
> >> 2.17.1
> >> 
> 
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: [PATCH v6 1/2] PCI: Add a helper to check Power Resource Requirements _PR3 existence

[Takashi Iwai]

On Fri, 18 Oct 2019 10:45:43 +0200,
Takashi Iwai wrote:
> 
> On Fri, 18 Oct 2019 10:30:11 +0200,
> Kai-Heng Feng wrote:
> > 
> > 
> > 
> > > On Oct 18, 2019, at 16:18, Takashi Iwai <tiwai@suse.de> wrote:
> > > 
> > > On Fri, 18 Oct 2019 09:38:47 +0200,
> > > Kai-Heng Feng wrote:
> > >> 
> > >> A driver may want to know the existence of _PR3, to choose different
> > >> runtime suspend behavior. A user will be add in next patch.
> > >> 
> > >> This is mostly the same as nouveau_pr3_present().
> > >> 
> > >> Reported-by: kbuild test robot <lkp@intel.com>
> > > 
> > > It's confusing -- this particular change isn't reported by the test
> > > bot, but only about the lack of the CONFIG_ACPI ifdef.
> > 
> > Hmm, because the test bot asked to add the tag.
> 
> Yes, but it's only if you add a new fix patch on top of it.
> You can write some their credit, too, but basically it'd be enough to
> point to the Link tag to the thread.
> 
> > If it's not appropriate will you drop it? I can also send a v7.
> 
> I can modify in my side.

Now I merged both patches to for-next branch.


thanks,

Takashi

Re: [alsa-devel] [PATCH v6 1/2] PCI: Add a helper to check Power Resource Requirements _PR3 existence

[Takashi Iwai]

On Fri, 18 Oct 2019 10:45:43 +0200,
Takashi Iwai wrote:
> 
> On Fri, 18 Oct 2019 10:30:11 +0200,
> Kai-Heng Feng wrote:
> > 
> > 
> > 
> > > On Oct 18, 2019, at 16:18, Takashi Iwai <tiwai@suse.de> wrote:
> > > 
> > > On Fri, 18 Oct 2019 09:38:47 +0200,
> > > Kai-Heng Feng wrote:
> > >> 
> > >> A driver may want to know the existence of _PR3, to choose different
> > >> runtime suspend behavior. A user will be add in next patch.
> > >> 
> > >> This is mostly the same as nouveau_pr3_present().
> > >> 
> > >> Reported-by: kbuild test robot <lkp@intel.com>
> > > 
> > > It's confusing -- this particular change isn't reported by the test
> > > bot, but only about the lack of the CONFIG_ACPI ifdef.
> > 
> > Hmm, because the test bot asked to add the tag.
> 
> Yes, but it's only if you add a new fix patch on top of it.
> You can write some their credit, too, but basically it'd be enough to
> point to the Link tag to the thread.
> 
> > If it's not appropriate will you drop it? I can also send a v7.
> 
> I can modify in my side.

Now I merged both patches to for-next branch.


thanks,

Takashi
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel