All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Björn Gerhart" <oss@extracloud.de>
To: lm-sensors@vger.kernel.org
Subject: Re: [lm-sensors] [PATCH] hwmon: (it87) Add support for IT8781F, IT8782F, IT8783E/F
Date: Fri, 23 Mar 2012 23:24:58 +0000	[thread overview]
Message-ID: <1149E1C9-FD96-44BF-BB90-A10361356DA4@extracloud.de> (raw)
In-Reply-To: <1331180739-19470-1-git-send-email-linux@roeck-us.net>

Hi Jean,


Am 23.03.2012 um 22:02 schrieb Jean Delvare:

> On Tue, 13 Mar 2012 19:43:15 +0100, Bjoern Gerhart wrote:
>> 2012/3/8 Guenter Roeck <linux@roeck-us.net>:
>>> Assume all three are compatible and have the same functionality.
>>> 
>>> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
>> Tested-by: Bjoern Gerhart <oss@extracloud.de>
> 
> Care to share the output of "sensors" with us?
> 
Sure. To be more precise, I tested with an IT8783 chip configured and wired by the hardware team at the company I'm working for on a proprietary mainboard. With the sensors.conf created therefore, the sensors output looks like this:

[root@localhost ~]# LANG=C sensors
it8783-isa-0a10
Adapter: ISA adapter
CPU Core:    +1.15 V  (min =  +0.70 V, max =  +1.70 V)
+1.50V:      +1.50 V  (min =  +1.10 V, max =  +1.90 V)
+3.30V:      +3.38 V  (min =  +2.70 V, max =  +4.00 V)
+12.0V:     +12.16 V  (min = +10.69 V, max = +13.70 V)
-12.0V:     -11.95 V  (min = -13.68 V, max = -10.30 V)
+1.10V:      +1.12 V  (min =  +0.90 V, max =  +1.22 V)
VBat:        +3.09 V
Fan1:       1662 RPM  (min =  300 RPM)
PSU:        1245 RPM  (min =  500 RPM)
Board T.:    +30.0 C  (low  =  +0.0 C, high = +55.0 C)  sensor = thermal diode
CPU T.:      +47.0 C  (low  =  +0.0 C, high = +63.0 C)  sensor = thermal diode

coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +40.0 C  (high = +86.0 C, crit = +100.0 C)
Core 1:      +43.0 C  (high = +86.0 C, crit = +100.0 C)


These are about the same values as the "Hardware Monitor" section at the BIOS setup shows also. So all values look reasonable.


In general, for future Tested-bys: does it make sense to append a kind of test report (like the above one) directly after the Tested-by statement, or should it be located in a separate mail?

Björn


_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

  parent reply	other threads:[~2012-03-23 23:24 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-03-08  4:25 [lm-sensors] [PATCH] hwmon: (it87) Add support for IT8781F, IT8782F, IT8783E/F Guenter Roeck
2012-03-13 18:43 ` Bjoern Gerhart
2012-03-15 21:13 ` Guenter Roeck
2012-03-15 21:18 ` Jean Delvare
2012-03-23 21:02 ` Jean Delvare
2012-03-23 21:17 ` Jean Delvare
2012-03-23 23:24 ` Björn Gerhart [this message]
2012-03-24  4:18 ` Guenter Roeck
2012-03-24  7:05 ` Jean Delvare
2012-03-24  8:11 ` Björn Gerhart
2012-03-24  8:37 ` Jean Delvare
2012-03-24 15:22 ` Guenter Roeck
2015-08-04 19:45 ` [lm-sensors] [PATCH] hwmon: (it87) Add support for IT8732F Justin Maggard
2015-08-04 20:08 ` Guenter Roeck
2015-08-04 21:03 ` Jean Delvare
2015-08-04 21:24 ` Guenter Roeck
2015-08-04 21:29 ` Justin Maggard
2015-08-04 21:50 ` Guenter Roeck
2012-03-24 16:23 [lm-sensors] [PATCH] hwmon: (it87) Add support for IT8781F, IT8782F, IT8783E/F Guenter Roeck
2012-03-24 18:07 ` Guenter Roeck
2012-03-26 16:08 ` Björn Gerhart
2012-03-26 17:01 ` Jean Delvare
2012-03-26 17:38 ` Guenter Roeck
2012-03-26 19:05 ` Guenter Roeck
2012-03-27 19:12 ` Björn Gerhart
2012-03-27 19:21 ` Björn Gerhart
2012-03-27 23:28 ` Guenter Roeck
2012-03-29 19:46 ` Björn Gerhart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1149E1C9-FD96-44BF-BB90-A10361356DA4@extracloud.de \
    --to=oss@extracloud.de \
    --cc=lm-sensors@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.