* SCO MTU fix needed for Kensington Bluetooth USB Adapter
@ 2006-07-14 16:05 Dan Williams
2006-07-14 16:22 ` [Bluez-devel] " Marcel Holtmann
0 siblings, 1 reply; 8+ messages in thread
From: Dan Williams @ 2006-07-14 16:05 UTC (permalink / raw)
To: bluez-devel; +Cc: Marcel Holtmann
It's a dongle, already listed in the blacklist, but might need more
quirks.
"Kensington Bluetooth USB Adapter"
Model #33085
FCCID: QVZ10350001
lsusb
--------------------------
Bus 002 Device 009: ID 0a5c:3535 Broadcom Corp.
hciconfig -a
--------------------------
hci0: Type: USB
BD Address: xx:xx:xx:xx:xx:xx ACL MTU: 377:10 SCO MTU: 16:0
UP RUNNING PSCAN ISCAN AUTH ENCRYPT
RX bytes:379 acl:0 sco:0 events:17 errors:0
TX bytes:318 acl:0 sco:0 commands:17 errors:0
cat /proc/bus/usb/devices
--------------------------
T: Bus=02 Lev=02 Prnt=09 Port=00 Cnt=01 Dev#= 10 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=047d ProdID=105d Rev= 0.06
S: Manufacturer=Broadcom
S: Product=BCM92035DG
S: SerialNumber=xxxxxxxxxxxx
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Bluez-devel] SCO MTU fix needed for Kensington Bluetooth USB Adapter
2006-07-14 16:05 SCO MTU fix needed for Kensington Bluetooth USB Adapter Dan Williams
@ 2006-07-14 16:22 ` Marcel Holtmann
2006-07-14 16:30 ` Dan Williams
0 siblings, 1 reply; 8+ messages in thread
From: Marcel Holtmann @ 2006-07-14 16:22 UTC (permalink / raw)
To: Dan Williams; +Cc: bluez-devel
Hi Dan,
> It's a dongle, already listed in the blacklist, but might need more
> quirks.
>
> "Kensington Bluetooth USB Adapter"
> Model #33085
> FCCID: QVZ10350001
>
> lsusb
> --------------------------
> Bus 002 Device 009: ID 0a5c:3535 Broadcom Corp.
>
> hciconfig -a
> --------------------------
> hci0: Type: USB
> BD Address: xx:xx:xx:xx:xx:xx ACL MTU: 377:10 SCO MTU: 16:0
> UP RUNNING PSCAN ISCAN AUTH ENCRYPT
> RX bytes:379 acl:0 sco:0 events:17 errors:0
> TX bytes:318 acl:0 sco:0 commands:17 errors:0
please give us the full "hciconfig -a" to check the HCI version and
revision of the chip.
Regards
Marcel
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: SCO MTU fix needed for Kensington Bluetooth USB Adapter
2006-07-14 16:22 ` [Bluez-devel] " Marcel Holtmann
@ 2006-07-14 16:30 ` Dan Williams
2006-07-14 16:39 ` [Bluez-devel] " Marcel Holtmann
0 siblings, 1 reply; 8+ messages in thread
From: Dan Williams @ 2006-07-14 16:30 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: bluez-devel
On Fri, 2006-07-14 at 18:22 +0200, Marcel Holtmann wrote:
> Hi Dan,
>
> > It's a dongle, already listed in the blacklist, but might need more
> > quirks.
> >
> > "Kensington Bluetooth USB Adapter"
> > Model #33085
> > FCCID: QVZ10350001
> >
> > lsusb
> > --------------------------
> > Bus 002 Device 009: ID 0a5c:3535 Broadcom Corp.
> >
> > hciconfig -a
> > --------------------------
> > hci0: Type: USB
> > BD Address: xx:xx:xx:xx:xx:xx ACL MTU: 377:10 SCO MTU: 16:0
> > UP RUNNING PSCAN ISCAN AUTH ENCRYPT
> > RX bytes:379 acl:0 sco:0 events:17 errors:0
> > TX bytes:318 acl:0 sco:0 commands:17 errors:0
>
> please give us the full "hciconfig -a" to check the HCI version and
> revision of the chip.
Sorry...
hci0: Type: USB
BD Address: xx:xx:xx:xx:xx:xx ACL MTU: 377:10 SCO MTU: 16:0
UP RUNNING PSCAN ISCAN AUTH ENCRYPT
RX bytes:379 acl:0 sco:0 events:17 errors:0
TX bytes:318 acl:0 sco:0 commands:17 errors:0
Features: 0xff 0xfe 0x0d 0x38 0x08 0x08 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'localhost.localdomain-0'
Class: 0x120104
Service Classes: Networking
Device Class: Computer, Desktop workstation
HCI Ver: 1.2 (0x2) HCI Rev: 0x0 LMP Ver: 1.2 (0x2) LMP Subver: 0x6965
Manufacturer: Broadcom Corporation (15)
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Bluez-devel] SCO MTU fix needed for Kensington Bluetooth USB Adapter
2006-07-14 16:30 ` Dan Williams
@ 2006-07-14 16:39 ` Marcel Holtmann
2006-07-14 16:48 ` Dan Williams
0 siblings, 1 reply; 8+ messages in thread
From: Marcel Holtmann @ 2006-07-14 16:39 UTC (permalink / raw)
To: Dan Williams; +Cc: bluez-devel
Hi Dan,
> > > It's a dongle, already listed in the blacklist, but might need more
> > > quirks.
> > >
> > > "Kensington Bluetooth USB Adapter"
> > > Model #33085
> > > FCCID: QVZ10350001
> > >
> > > lsusb
> > > --------------------------
> > > Bus 002 Device 009: ID 0a5c:3535 Broadcom Corp.
> > >
> > > hciconfig -a
> > > --------------------------
> > > hci0: Type: USB
> > > BD Address: xx:xx:xx:xx:xx:xx ACL MTU: 377:10 SCO MTU: 16:0
> > > UP RUNNING PSCAN ISCAN AUTH ENCRYPT
> > > RX bytes:379 acl:0 sco:0 events:17 errors:0
> > > TX bytes:318 acl:0 sco:0 commands:17 errors:0
> >
> > please give us the full "hciconfig -a" to check the HCI version and
> > revision of the chip.
>
> Sorry...
>
> hci0: Type: USB
> BD Address: xx:xx:xx:xx:xx:xx ACL MTU: 377:10 SCO MTU: 16:0
> UP RUNNING PSCAN ISCAN AUTH ENCRYPT
> RX bytes:379 acl:0 sco:0 events:17 errors:0
> TX bytes:318 acl:0 sco:0 commands:17 errors:0
> Features: 0xff 0xfe 0x0d 0x38 0x08 0x08 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'localhost.localdomain-0'
> Class: 0x120104
> Service Classes: Networking
> Device Class: Computer, Desktop workstation
> HCI Ver: 1.2 (0x2) HCI Rev: 0x0 LMP Ver: 1.2 (0x2) LMP Subver: 0x6965
> Manufacturer: Broadcom Corporation (15)
please also send "hciconfig hci0 features" (I don't like to decode that
by hand). And check if "hciconfig hci0 inqmode 1" succeeds.
Regards
Marcel
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: SCO MTU fix needed for Kensington Bluetooth USB Adapter
2006-07-14 16:39 ` [Bluez-devel] " Marcel Holtmann
@ 2006-07-14 16:48 ` Dan Williams
2006-07-14 16:56 ` [Bluez-devel] " Marcel Holtmann
0 siblings, 1 reply; 8+ messages in thread
From: Dan Williams @ 2006-07-14 16:48 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: bluez-devel
On Fri, 2006-07-14 at 18:39 +0200, Marcel Holtmann wrote:
> Hi Dan,
>
> > > > It's a dongle, already listed in the blacklist, but might need more
> > > > quirks.
> > > >
> > > > "Kensington Bluetooth USB Adapter"
> > > > Model #33085
> > > > FCCID: QVZ10350001
> > > >
> > > > lsusb
> > > > --------------------------
> > > > Bus 002 Device 009: ID 0a5c:3535 Broadcom Corp.
> > > >
> > > > hciconfig -a
> > > > --------------------------
> > > > hci0: Type: USB
> > > > BD Address: xx:xx:xx:xx:xx:xx ACL MTU: 377:10 SCO MTU: 16:0
> > > > UP RUNNING PSCAN ISCAN AUTH ENCRYPT
> > > > RX bytes:379 acl:0 sco:0 events:17 errors:0
> > > > TX bytes:318 acl:0 sco:0 commands:17 errors:0
> > >
> > > please give us the full "hciconfig -a" to check the HCI version and
> > > revision of the chip.
> >
> > Sorry...
> >
> > hci0: Type: USB
> > BD Address: xx:xx:xx:xx:xx:xx ACL MTU: 377:10 SCO MTU: 16:0
> > UP RUNNING PSCAN ISCAN AUTH ENCRYPT
> > RX bytes:379 acl:0 sco:0 events:17 errors:0
> > TX bytes:318 acl:0 sco:0 commands:17 errors:0
> > Features: 0xff 0xfe 0x0d 0x38 0x08 0x08 0x00 0x00
> > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> > Link policy: RSWITCH HOLD SNIFF PARK
> > Link mode: SLAVE ACCEPT
> > Name: 'localhost.localdomain-0'
> > Class: 0x120104
> > Service Classes: Networking
> > Device Class: Computer, Desktop workstation
> > HCI Ver: 1.2 (0x2) HCI Rev: 0x0 LMP Ver: 1.2 (0x2) LMP Subver: 0x6965
> > Manufacturer: Broadcom Corporation (15)
For reference, kernel is:
2.6.17-1.2364.fc6 #1 SMP Mon Jul 10 12:40:21 EDT 2006 i686
> please also send "hciconfig hci0 features" (I don't like to decode that
[localhost ~]# /usr/sbin/hciconfig hci0 features
hci0: Type: USB
BD Address: xx:xx:xx:xx:xx:xx ACL MTU: 377:10 SCO MTU: 16:0
Features: 0xff 0xfe 0x0d 0x38 0x08 0x08 0x00 0x00
<3-slot packets> <5-slot packets> <encryption> <slot offset>
<timing accuracy> <role switch> <hold mode> <sniff mode>
<RSSI> <channel quality> <SCO link> <HV2 packets>
<HV3 packets> <u-law log> <A-law log> <CVSD> <power control>
<transparent SCO> <enhanced iscan> <interlaced iscan>
<interlaced pscan> <AFH cap. slave> <AFH cap. master>
> by hand). And check if "hciconfig hci0 inqmode 1" succeeds.
[localhost ~]# /usr/sbin/hciconfig hci0 inqmode 1
[localhost ~]#
(ie, nothing printed out)
Thanks,
Dan
> Regards
>
> Marcel
>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Bluez-devel] SCO MTU fix needed for Kensington Bluetooth USB Adapter
2006-07-14 16:48 ` Dan Williams
@ 2006-07-14 16:56 ` Marcel Holtmann
2006-07-14 18:08 ` Dan Williams
0 siblings, 1 reply; 8+ messages in thread
From: Marcel Holtmann @ 2006-07-14 16:56 UTC (permalink / raw)
To: Dan Williams; +Cc: bluez-devel
Hi Dan,
> > please also send "hciconfig hci0 features" (I don't like to decode that
>
> [localhost ~]# /usr/sbin/hciconfig hci0 features
> hci0: Type: USB
> BD Address: xx:xx:xx:xx:xx:xx ACL MTU: 377:10 SCO MTU: 16:0
> Features: 0xff 0xfe 0x0d 0x38 0x08 0x08 0x00 0x00
> <3-slot packets> <5-slot packets> <encryption> <slot offset>
> <timing accuracy> <role switch> <hold mode> <sniff mode>
> <RSSI> <channel quality> <SCO link> <HV2 packets>
> <HV3 packets> <u-law log> <A-law log> <CVSD> <power control>
> <transparent SCO> <enhanced iscan> <interlaced iscan>
> <interlaced pscan> <AFH cap. slave> <AFH cap. master>
>
>
> > by hand). And check if "hciconfig hci0 inqmode 1" succeeds.
>
> [localhost ~]# /usr/sbin/hciconfig hci0 inqmode 1
> [localhost ~]#
>
> (ie, nothing printed out)
if "hciconfig hci0 inqmode" return Inquiry with RSSI as mode then this
dongle also supports it, even if it is not mentioned in the features.
Regards
Marcel
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: SCO MTU fix needed for Kensington Bluetooth USB Adapter
2006-07-14 16:56 ` [Bluez-devel] " Marcel Holtmann
@ 2006-07-14 18:08 ` Dan Williams
2006-07-18 11:02 ` [Bluez-devel] " Marcel Holtmann
0 siblings, 1 reply; 8+ messages in thread
From: Dan Williams @ 2006-07-14 18:08 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: bluez-devel
On Fri, 2006-07-14 at 18:56 +0200, Marcel Holtmann wrote:
> Hi Dan,
>
> > > please also send "hciconfig hci0 features" (I don't like to decode that
> >
> > [localhost ~]# /usr/sbin/hciconfig hci0 features
> > hci0: Type: USB
> > BD Address: xx:xx:xx:xx:xx:xx ACL MTU: 377:10 SCO MTU: 16:0
> > Features: 0xff 0xfe 0x0d 0x38 0x08 0x08 0x00 0x00
> > <3-slot packets> <5-slot packets> <encryption> <slot offset>
> > <timing accuracy> <role switch> <hold mode> <sniff mode>
> > <RSSI> <channel quality> <SCO link> <HV2 packets>
> > <HV3 packets> <u-law log> <A-law log> <CVSD> <power control>
> > <transparent SCO> <enhanced iscan> <interlaced iscan>
> > <interlaced pscan> <AFH cap. slave> <AFH cap. master>
> >
> >
> > > by hand). And check if "hciconfig hci0 inqmode 1" succeeds.
> >
> > [localhost ~]# /usr/sbin/hciconfig hci0 inqmode 1
> > [localhost ~]#
> >
> > (ie, nothing printed out)
>
> if "hciconfig hci0 inqmode" return Inquiry with RSSI as mode then this
> dongle also supports it, even if it is not mentioned in the features.
It does return that, yes.
> Regards
>
> Marcel
>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Bluez-devel] SCO MTU fix needed for Kensington Bluetooth USB Adapter
2006-07-14 18:08 ` Dan Williams
@ 2006-07-18 11:02 ` Marcel Holtmann
0 siblings, 0 replies; 8+ messages in thread
From: Marcel Holtmann @ 2006-07-18 11:02 UTC (permalink / raw)
To: Dan Williams; +Cc: bluez-devel
Hi Dan,
> > > > please also send "hciconfig hci0 features" (I don't like to decode that
> > >
> > > [localhost ~]# /usr/sbin/hciconfig hci0 features
> > > hci0: Type: USB
> > > BD Address: xx:xx:xx:xx:xx:xx ACL MTU: 377:10 SCO MTU: 16:0
> > > Features: 0xff 0xfe 0x0d 0x38 0x08 0x08 0x00 0x00
> > > <3-slot packets> <5-slot packets> <encryption> <slot offset>
> > > <timing accuracy> <role switch> <hold mode> <sniff mode>
> > > <RSSI> <channel quality> <SCO link> <HV2 packets>
> > > <HV3 packets> <u-law log> <A-law log> <CVSD> <power control>
> > > <transparent SCO> <enhanced iscan> <interlaced iscan>
> > > <interlaced pscan> <AFH cap. slave> <AFH cap. master>
> > >
> > >
> > > > by hand). And check if "hciconfig hci0 inqmode 1" succeeds.
> > >
> > > [localhost ~]# /usr/sbin/hciconfig hci0 inqmode 1
> > > [localhost ~]#
> > >
> > > (ie, nothing printed out)
> >
> > if "hciconfig hci0 inqmode" return Inquiry with RSSI as mode then this
> > dongle also supports it, even if it is not mentioned in the features.
>
> It does return that, yes.
I added a quirk to hcid to enable Inquiry with RSSI for your dongle by
default.
Regards
Marcel
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2006-07-18 11:02 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-07-14 16:05 SCO MTU fix needed for Kensington Bluetooth USB Adapter Dan Williams
2006-07-14 16:22 ` [Bluez-devel] " Marcel Holtmann
2006-07-14 16:30 ` Dan Williams
2006-07-14 16:39 ` [Bluez-devel] " Marcel Holtmann
2006-07-14 16:48 ` Dan Williams
2006-07-14 16:56 ` [Bluez-devel] " Marcel Holtmann
2006-07-14 18:08 ` Dan Williams
2006-07-18 11:02 ` [Bluez-devel] " Marcel Holtmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.