[U-Boot-Users] u-boot doubt !!!!!!!

[U-Boot-Users] u-boot doubt !!!!!!!

[gnanasekar.dasarathan at wipro.com]

Hi, 

 i'm very new to u-boot , i installed u-boot 1.1.6 but i don't know how to configure u-boot, i know that some tool chain shd be used, which tool chain shd be used and how/where to add tool chain to u-boot1.1.6 and how to make ? basically i'm so new, could u please provide me the detailed notes of how to compile?eagerly waiting for ur reply

regards,

Gnanasekar
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070221/7214a4a7/attachment.htm 

[U-Boot-Users] u-boot doubt !!!!!!!

[Amit Kandalgaonkar]

Hi Gnanasekar,

The tool chain depends on what processor you are using. whether PowerPC or
ARM. For thse toolchains you have to download GGC, GLIBC and cross compile
them. You can also find pre compiled GCC and Lib but I would suggest that
you try compiling your own tool chain. This shall give you a feel of how
to build using GCC. how to use GNU tools etc.

Regarding how to build Uboot. it is very simple. you have read the readme
file first and then follow.

if you have any problems I would be glad to help you out if I can :-)

Regards
Amit

On 2/21/07, gnanasekar.dasarathan at wipro.com <gnanasekar.dasarathan@wipro.com
> wrote:
>
>
> Hi,
>
>  i'm very new to u-boot , i installed u-boot 1.1.6 but i don't know how to
> configure u-boot, i know that some tool chain shd be used, which tool chain
> shd be used and how/where to add tool chain to u-boot1.1.6 and how to make
> ? basically i'm so new, could u please provide me the detailed notes of how
> to compile?eagerly waiting for ur reply
>
> regards,
>
> Gnanasekar
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share
> your
> opinions on IT & business topics through brief surveys-and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070221/0d687e2e/attachment.htm 

[U-Boot-Users] u-boot doubt !!!!!!!

[Ben Warren]

On Wed, 2007-02-21 at 17:07 +0530, gnanasekar.dasarathan at wipro.com
wrote:
> 
> Hi,
> 
>  i'm very new to u-boot , i installed u-boot 1.1.6 but i don't know
> how to configure u-boot, i know that some tool chain shd be used,
> which tool chain shd be used and how/where to add tool chain to
> u-boot1.1.6 and how to make ? basically i'm so new, could u please
> provide me the detailed notes of how to compile?eagerly waiting for ur
> reply

Please visit this website and read everything.
http://www.denx.de/wiki/DULG/Manual

It explains how to get a pre-compiled toolchain (ELDK), and how to
install and configure U-boot and Linux.

regards,
Ben