* PROBLEM: "BUG:" when resuming from suspend-to-ram
@ 2007-02-27 18:45 Kristian Grønfeldt Sørensen
2007-02-27 22:04 ` Rafael J. Wysocki
0 siblings, 1 reply; 21+ messages in thread
From: Kristian Grønfeldt Sørensen @ 2007-02-27 18:45 UTC (permalink / raw)
To: Linux kernel mailing list
Hi.
PROBLEM: "BUG:" when resumimg from suspend-to-ram
My laptop have a problem with resuming from suspend-to-ram.
It does not occur every time - most of the time, resume works without
any problem.at all.
After it occurs, the laptop refuses to go into suspend-to-ram mode until
next reboot.
The system is a Debian unstable running with a self-compiled 2.6.20
kernel downloaded from kernel.org.
I've only tried suspend-to-ram on 2.6.20 so I don't know whether or not
other versions might have the same problem.
I'm not subscribed to the list. Please CC me.
Regards
Kristian Sørensen
Environment information:
Content of /proc/version:
Linux version 2.6.20-x300 (root@kriller) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 PREEMPT Sat Feb 10 23:06:13 CET 2007
---- Begin Kernel config ----
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20-x300
# Sat Feb 10 22:48:08 2007
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
#
# Processor type and features
#
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_PARAVIRT is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUMM=y
# CONFIG_MCORE2 is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
CONFIG_I8K=y
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
CONFIG_PM_DEBUG=y
# CONFIG_DISABLE_CONSOLE_SUSPEND is not set
CONFIG_PM_TRACE=y
# CONFIG_PM_SYSFS_DEPRECATED is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
CONFIG_ACPI_CONTAINER=m
# CONFIG_ACPI_SBS is not set
#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=m
CONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# shared options
#
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
CONFIG_X86_SPEEDSTEP_LIB=m
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
# CONFIG_EISA_VLB_PRIMING is not set
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
CONFIG_EISA_NAMES=y
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
CONFIG_DEFAULT_RENO=y
CONFIG_DEFAULT_TCP_CONG="reno"
# CONFIG_TCP_MD5SIG is not set
#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK_ENABLED is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
#
# DCCP Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
# CONFIG_LTPC is not set
# CONFIG_COPS is not set
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_FIFO=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
# CONFIG_TOIM3232_DONGLE is not set
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
#
# Old SIR device drivers
#
CONFIG_IRPORT_SIR=m
#
# Old Serial dongle support
#
CONFIG_DONGLE_OLD=y
CONFIG_ESI_DONGLE_OLD=m
CONFIG_ACTISYS_DONGLE_OLD=m
CONFIG_TEKRAM_DONGLE_OLD=m
CONFIG_GIRBIL_DONGLE_OLD=m
CONFIG_LITELINK_DONGLE_OLD=m
CONFIG_MCP2120_DONGLE_OLD=m
CONFIG_OLD_BELKIN_DONGLE_OLD=m
CONFIG_ACT200L_DONGLE_OLD=m
CONFIG_MA600_DONGLE_OLD=m
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
# CONFIG_MCS_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_WIRELESS_EXT=y
CONFIG_FIB_RULES=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=m
CONFIG_DEBUG_DRIVER=y
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
# CONFIG_MTD_PARTITIONS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_TS5500 is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=32768
CONFIG_MTDRAM_ERASE_SIZE=256
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_NAND_CAFE is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_MSI_LAPTOP is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_IDE_TASK_IOCTL=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
CONFIG_BLK_DEV_SVWKS=y
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_IDE_CHIPSETS=y
#
# Note: most of these also require special kernel boot parameters
#
# CONFIG_BLK_DEV_4DRIVES is not set
# CONFIG_BLK_DEV_ALI14XX is not set
# CONFIG_BLK_DEV_DTC2278 is not set
# CONFIG_BLK_DEV_HT6560B is not set
# CONFIG_BLK_DEV_QD65XX is not set
# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
#
# SCSI low-level drivers
#
CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
CONFIG_SCSI_ARCMSR=m
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
#
# PCMCIA SCSI adapter support
#
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_AHCI=m
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=m
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
CONFIG_SATA_INTEL_COMBINED=y
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_ISAPNP is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_WINBOND_VLB is not set
# CONFIG_PATA_PLATFORM is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
CONFIG_IEEE1394_EXPORT_FULL_API=y
#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_PCMCIA_XIRTULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
CONFIG_SKY2=m
CONFIG_SK98LIN=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_QLA3XXX=m
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
CONFIG_NET_WIRELESS_RTNETLINK=y
#
# Obsolete Wireless cards support (pre-802.11)
#
CONFIG_STRIP=m
CONFIG_ARLAN=m
CONFIG_WAVELAN=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
#
# Wireless 802.11 Frequency Hopping cards support
#
CONFIG_PCMCIA_RAYCS=m
#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
# CONFIG_IPW2200_RADIOTAP is not set
# CONFIG_IPW2200_PROMISCUOUS is not set
# CONFIG_IPW2200_QOS is not set
# CONFIG_IPW2200_DEBUG is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_PCMCIA_WL3501=m
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_BCM43XX=m
CONFIG_BCM43XX_DEBUG=y
CONFIG_BCM43XX_DMA=y
CONFIG_BCM43XX_PIO=y
CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
# CONFIG_BCM43XX_DMA_MODE is not set
# CONFIG_BCM43XX_PIO_MODE is not set
CONFIG_ZD1211RW=m
CONFIG_ZD1211RW_DEBUG=y
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# ATM drivers
#
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E_MAYBE is not set
# CONFIG_ATM_HE is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
# CONFIG_SLIP_COMPRESSED is not set
CONFIG_SLHC=m
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_FC is not set
CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
CONFIG_NETPOLL_RX=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
CONFIG_ISDN=m
#
# Old ISDN4Linux
#
# CONFIG_ISDN_I4L is not set
#
# CAPI subsystem
#
CONFIG_ISDN_CAPI=m
# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
# CONFIG_ISDN_CAPI_MIDDLEWARE is not set
CONFIG_ISDN_CAPI_CAPI20=m
#
# CAPI hardware drivers
#
#
# Active AVM cards
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
#
# Active Eicon DIVA Server cards
#
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
#
# Telephony Support
#
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_INPORT=m
# CONFIG_MOUSE_ATIXL is not set
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_UCB1400 is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_WISTRON_BTNS is not set
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_DIGIEPCA=m
CONFIG_ESPSERIAL=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
# CONFIG_MOXA_SMARTIO_NEW is not set
CONFIG_ISI=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
# CONFIG_SYNCLINK_GT is not set
CONFIG_N_HDLC=m
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not set
CONFIG_SX=m
CONFIG_RIO=m
CONFIG_RIO_OLDPCI=y
CONFIG_STALDRV=y
CONFIG_STALLION=m
CONFIG_ISTALLION=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=m
CONFIG_SERIAL_8250_ACCENT=m
CONFIG_SERIAL_8250_BOCA=m
# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
CONFIG_SERIAL_8250_HUB6=m
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
# CONFIG_IBMASR is not set
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
# CONFIG_I8XX_TCO is not set
CONFIG_ITCO_WDT=m
# CONFIG_ITCO_VENDOR_SUPPORT is not set
CONFIG_SC1200_WDT=m
# CONFIG_PC87413_WDT is not set
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=m
CONFIG_MIXCOMWD=m
CONFIG_WDT=m
CONFIG_WDT_501=y
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
CONFIG_MWAVE=m
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_RTC_IRQ=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=m
CONFIG_I2C_ELEKTOR=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
#
# SPI Protocol Masters
#
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
CONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=m
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=m
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_HDAPS=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
#
# Encoders/decoders and other helper chips
#
#
# Audio decoders
#
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TDA9875 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_TLV320AIC23B is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
#
# Video decoders
#
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
# CONFIG_VIDEO_OV7670 is not set
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA7111=m
CONFIG_VIDEO_SAA7114=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA7191=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
#
# Video and audio decoders
#
CONFIG_VIDEO_CX25840=m
#
# MPEG video encoders
#
CONFIG_VIDEO_CX2341X=m
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_BT848_DVB is not set
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_PMS=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
# CONFIG_VIDEO_ZORAN_AVS6EYES is not set
CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_SAA7134=m
# CONFIG_VIDEO_SAA7134_ALSA is not set
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
# CONFIG_VIDEO_CX88_ALSA is not set
# CONFIG_VIDEO_CX88_BLACKBIRD is not set
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
# CONFIG_VIDEO_CAFE_CCIC is not set
#
# V4L USB devices
#
# CONFIG_VIDEO_PVRUSB2 is not set
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_USBVISION is not set
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
# CONFIG_USB_QUICKCAM_MESSENGER is not set
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
#
# Radio Adapters
#
CONFIG_RADIO_CADET=m
CONFIG_RADIO_RTRACK=m
CONFIG_RADIO_RTRACK2=m
CONFIG_RADIO_AZTECH=m
CONFIG_RADIO_GEMTEK=m
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_RADIO_SF16FMI=m
CONFIG_RADIO_SF16FMR2=m
CONFIG_RADIO_TERRATEC=m
CONFIG_RADIO_TRUST=m
CONFIG_RADIO_TYPHOON=m
CONFIG_RADIO_TYPHOON_PROC_FS=y
CONFIG_RADIO_ZOLTRIX=m
CONFIG_USB_DSBR=m
#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=m
CONFIG_DVB_CORE_ATTACH=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
# CONFIG_DVB_USB_TTUSB2 is not set
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
CONFIG_DVB_CINERGYT2_TUNING=y
CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI is not set
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_STV0299=m
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_MT312=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_TDA10086=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
#
# Tuners/PLL support
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUNER_MT2060=m
CONFIG_DVB_TUNER_LGH06XF=m
#
# Miscellaneous devices
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_TUA6100=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_USB_DABUSB=m
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_I810=m
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_DEVICE=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
#
# ISA devices
#
# CONFIG_SND_ADLIB is not set
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_MIRO is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X_BOOL is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_AC97_POWER_SAVE=y
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
#
# HID Devices
#
CONFIG_HID=y
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT_POWERBOOK=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_TOUCHSCREEN=m
CONFIG_USB_TOUCHSCREEN_EGALAX=y
CONFIG_USB_TOUCHSCREEN_PANJIT=y
CONFIG_USB_TOUCHSCREEN_3M=y
CONFIG_USB_TOUCHSCREEN_ITM=y
# CONFIG_USB_TOUCHSCREEN_ETURBO is not set
# CONFIG_USB_TOUCHSCREEN_GUNZE is not set
CONFIG_USB_TOUCHSCREEN_DMC_TSC10=y
CONFIG_USB_YEALINK=m
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
# CONFIG_USB_ATI_REMOTE2 is not set
CONFIG_USB_KEYSPAN_REMOTE=m
CONFIG_USB_APPLETOUCH=m
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET_MII=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_NET_ZAURUS=m
# CONFIG_USB_MON is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_AIRPRIME=m
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
# CONFIG_USB_SERIAL_IR is not set
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_DEBUG is not set
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_TEST=m
#
# USB DSL modem support
#
# CONFIG_USB_ATM is not set
#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
#
# MMC/SD Card support
#
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_SDHCI=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=m
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
# CONFIG_EDAC_AMD76X is not set
CONFIG_EDAC_E7XXX=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82875P=m
CONFIG_EDAC_I82860=m
# CONFIG_EDAC_R82600 is not set
CONFIG_EDAC_POLL=y
#
# Real Time Clock
#
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=m
CONFIG_RTC_INTF_PROC=m
CONFIG_RTC_INTF_DEV=m
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# Virtualization
#
# CONFIG_KVM is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
CONFIG_RXRPC=m
CONFIG_9P_FS=m
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=m
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=m
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=m
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=m
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
CONFIG_DLM=m
CONFIG_DLM_TCP=y
# CONFIG_DLM_SCTP is not set
# CONFIG_DLM_DEBUG is not set
#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_SLAB_LEAK=y
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
#
# Page alloc debug is incompatible with Software Suspend on i386
#
# CONFIG_DEBUG_RODATA is not set
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=m
CONFIG_SECURITY_ROOTPLUG=m
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_CRYPTO_DEV_GEODE=m
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_IOMAP_COPY=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
---- End kernel config ----
---- Kernel output ----
CLASS: Unregistering class device. ID = 'event3'
class_uevent - name = event3
class_device_create_uevent called for event3
device class 'event3': release.
class_device_create_release called for event3
BUG: unable to handle kernel paging request at virtual address 6b6b6b6b
printing eip:
f8825a81
*pde = 00000000
Oops: 0000 [#1]
PREEMPT
Modules linked in: tg3 battery ac thermal fan button i915 drm binfmt_misc rfcomm
l2cap ipv6 fuse capability commoncap cpufreq_performance aoe af_packet nls_utf8
ntfs nls_iso8859_1 nls_cp437 vfat fat dm_snapshot dm_mirror dm_mod ieee80211_cr
ypt_tkip ieee80211_crypt pd6729 snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmi
di snd_seq_midi_event snd_seq snd_seq_device sermouse hci_vhci hci_uart wbsd mmc
_block mmc_core tun msr cpuid cpufreq_stats container video speedstep_lib speeds
tep_centrino processor sr_mod sbp2 scsi_mod ide_cd cdrom eth1394 hci_usb bluetoo
th pcmcia firmware_class irda snd_intel8x0m snd_intel8x0 snd_ac97_codec crc_ccit
t ac97_bus snd_pcm_oss snd_mixer_oss rtc i2c_i801 snd_pcm snd_timer ohci1394 iee
e1394 i2c_core serio_raw intel_agp iTCO_wdt snd soundcore snd_page_alloc ehci_hc
d pcspkr uhci_hcd yenta_socket rsrc_nonstatic pcmcia_core usbcore agpgart moused
ev evdev
CPU: 0
EIP: 0060:[<f8825a81>] Not tainted VLI
EFLAGS: 00010202 (2.6.20-x300 #1)
EIP is at evdev_disconnect+0xb1/0xe0 [evdev]
eax: 00000000 ebx: 6b6b675b ecx: 10000000 edx: 00000000
esi: f73212a8 edi: f6dcf5c4 ebp: e6f31f04 esp: e6f31ef8
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 9025, ti=e6f30000 task=ef56a070 task.ti=e6f30000)
Stack: 00000000 f6ca2528 f7321264 e6f31f24 c02a899f 00000000 f6dcfcf0 f6dcfcf0
f253ce90 c1a3002c c1a610a4 e6f31f34 f8ccd0c5 f8ccece0 c1a3002c e6f31f48
c0263225 00000000 f8ccee00 00000000 e6f31f50 f8ccd7d1 e6f31fb0 c013e772
Call Trace:
[<c01041ea>] show_trace_log_lvl+0x1a/0x30
[<c01042a9>] show_stack_log_lvl+0xa9/0xd0
[<c01044bf>] show_registers+0x1ef/0x360
[<c0104734>] die+0x104/0x240
[<c0115ba5>] do_page_fault+0x2b5/0x5c0
[<c0335b5c>] error_code+0x74/0x7c
[<c02a899f>] input_unregister_device+0xaf/0x160
[<f8ccd0c5>] acpi_button_remove+0x2b/0x3f [button]
[<c0263225>] acpi_bus_unregister_driver+0x40/0xaa
[<f8ccd7d1>] acpi_button_exit+0xd/0x6a [button]
[<c013e772>] sys_delete_module+0x142/0x1b0
[<c0103220>] syscall_call+0x7/0xb
=======================
Code: f0 74 3c 8d b4 26 00 00 00 00 8d 83 08 04 00 00 b9 06 00 02 00 ba 1d 00 00 00 e8 eb 54 95 c7 8b 9b 10 04 00 00 81 eb 10 04 00 00 <8b> 83 10 04 00 00 0f 18 00 90 8d 83 10 04 00 00 39 f0 75 cb 5b
EIP: [<f8825a81>] evdev_disconnect+0xb1/0xe0 [evdev] SS:ESP 0068:e6f31ef8
---- End kernel output ----
---- Output of ver_linux
Linux kriller 2.6.20-x300 #1 PREEMPT Sat Feb 10 23:06:13 CET 2007 i686 GNU/Linux
Gnu C 4.1.2
Gnu make 3.81
binutils 2.17
util-linux 2.12r
mount 2.12r
module-init-tools 3.3-pre2
e2fsprogs 1.40-WIP
xfsprogs 2.8.18
pcmciautils 014
quota-tools 3.14.
Linux C Library 2.3.6
Dynamic linker (ldd) 2.3.6
Procps 3.2.7
Net-tools 1.60
Console-tools 0.2.3
oprofile 0.9.2
Sh-utils 5.97
udev 105
wireless-tools 28
Modules Loaded: tg3 battery ac thermal fan button i915 drm binfmt_misc
rfcomm l2cap ipv6 fuse capability commoncap cpufreq_performance aoe
af_packet nls_utf8 ntfs nls_iso8859_1 nls_cp437 vfat fat dm_snapshot
dm_mirror dm_mod ieee80211_crypt_tkip ieee80211_crypt pd6729
snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event
snd_seq snd_seq_device sermouse hci_vhci hci_uart wbsd mmc_block
mmc_core tun msr cpuid cpufreq_stats container video speedstep_lib
speedstep_centrino processor sr_mod sbp2 scsi_mod ide_cd cdrom eth1394
hci_usb bluetooth pcmcia firmware_class irda snd_intel8x0m snd_intel8x0
snd_ac97_codec crc_ccitt ac97_bus snd_pcm_oss snd_mixer_oss rtc i2c_i801
snd_pcm snd_timer ohci1394 ieee1394 i2c_core serio_raw intel_agp
iTCO_wdt snd soundcore snd_page_alloc ehci_hcd pcspkr uhci_hcd
yenta_socket rsrc_nonstatic pcmcia_core usbcore agpgart mousedev evdev
---- End output of ver_linux ----
---- Content of /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 9
model name : Intel(R) Pentium(R) M processor 1200MHz
stepping : 5
cpu MHz : 1000.000
cache size : 1024 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 tm pbe est tm2
bogomips : 1995.55
clflush size : 64
---- End cpuinfo ----
---- Content of /proc/ioports ----
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:1f.1
01f0-01f7 : 0000:00:1f.1
01f0-01f7 : ide0
02f8-02ff : serial
0376-0376 : 0000:00:1f.1
03c0-03df : vesafb
03f6-03f6 : 0000:00:1f.1
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
1000-107f : 0000:00:1f.0
1000-107f : motherboard
1000-1003 : ACPI PM1a_EVT_BLK
1004-1005 : ACPI PM1a_CNT_BLK
1008-100b : ACPI PM_TMR
1010-1015 : ACPI CPU throttle
1020-1020 : ACPI PM2_CNT_BLK
1028-102f : ACPI GPE0_BLK
1060-107f : iTCO_wdt
1180-11bf : 0000:00:1f.0
1180-11bf : motherboard
1800-1807 : 0000:00:02.0
1810-181f : 0000:00:1f.1
1810-1817 : ide0
1820-183f : 0000:00:1d.0
1820-183f : uhci_hcd
1840-185f : 0000:00:1d.1
1840-185f : uhci_hcd
1860-187f : 0000:00:1d.2
1860-187f : uhci_hcd
1880-189f : 0000:00:1f.3
1880-189f : i801_smbus
18c0-18ff : 0000:00:1f.5
18c0-18ff : Intel 82801DB-ICH4
1c00-1cff : 0000:00:1f.5
1c00-1cff : Intel 82801DB-ICH4
2000-207f : 0000:00:1f.6
2000-207f : Intel 82801DB-ICH4 Modem
2400-24ff : 0000:00:1f.6
2400-24ff : Intel 82801DB-ICH4 Modem
3000-3fff : PCI Bus #02
3000-30ff : PCI CardBus #03
3400-34ff : PCI CardBus #03
3800-38ff : PCI CardBus #07
3c00-3cff : PCI CardBus #07
---- End /proc/ioports -----
---- Begin content of /proc/iomem ----
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cc7ff : Video ROM
000cc800-000cd7ff : Adapter ROM
000cd800-000ce7ff : Adapter ROM
000ce800-000d07ff : Adapter ROM
000f0000-000fffff : System ROM
00100000-4767dfff : System RAM
00100000-0033680f : Kernel code
00336810-00436533 : Kernel data
4767e000-476dffff : ACPI Non-volatile Storage
476e0000-476eafff : ACPI Tables
476eb000-476fffff : ACPI Non-volatile Storage
47700000-47ffffff : reserved
50000000-57ffffff : PCI Bus #02
50000000-53ffffff : PCI CardBus #03
54000000-57ffffff : PCI CardBus #07
58000000-580003ff : 0000:00:1f.1
5c000000-5fffffff : PCI CardBus #03
60000000-63ffffff : PCI CardBus #07
e0000000-e007ffff : 0000:00:02.0
e0080000-e00fffff : 0000:00:02.1
e0100000-e01003ff : 0000:00:1d.7
e0100000-e01003ff : ehci_hcd
e0100800-e01008ff : 0000:00:1f.5
e0100800-e01008ff : Intel 82801DB-ICH4
e0100c00-e0100dff : 0000:00:1f.5
e0100c00-e0100dff : Intel 82801DB-ICH4
e0200000-e02fffff : PCI Bus #02
e0200000-e020ffff : 0000:02:05.0
e0200000-e020ffff : tg3
e0210000-e0211fff : 0000:02:04.0
e0212000-e02127ff : 0000:02:03.2
e0212000-e02127ff : ohci1394
e0213000-e0213fff : 0000:02:03.0
e0213000-e0213fff : yenta_socket
e0214000-e0214fff : 0000:02:03.1
e0214000-e0214fff : yenta_socket
e8000000-efffffff : 0000:00:02.0
e8000000-e87cffff : vesafb
f0000000-f7ffffff : 0000:00:02.1
fec10000-fec1ffff : reserved
ff800000-ffbfffff : reserved
fffffc00-ffffffff : reserved
---- End content of /proc/iomem ----
---- Begin output of lspci -vvv ----
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Dell Unknown device 014f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: <access denied>
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Dell Unknown device 014f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Dell Unknown device 014f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) (prog-if 00 [VGA])
Subsystem: Dell Unknown device 014f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at 1800 [size=8]
Capabilities: <access denied>
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
Subsystem: Dell Unknown device 014f
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at f0000000 (32-bit, prefetchable) [disabled] [size=128M]
Region 1: Memory at e0080000 (32-bit, non-prefetchable) [disabled] [size=512K]
Capabilities: <access denied>
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Unknown device 014f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 1820 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Unknown device 014f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1840 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Unknown device 014f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at 1860 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell Unknown device 014f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 10
Region 0: Memory at e0100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=02, subordinate=0a, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e0200000-e02fffff
Prefetchable memory behind bridge: 50000000-57ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Unknown device 014f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Region 5: Memory at 58000000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
Subsystem: Dell Unknown device 014f
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 1880 [size=32]
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
Subsystem: Dell Unknown device 014f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 18c0 [size=64]
Region 2: Memory at e0100c00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at e0100800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01) (prog-if 00 [Generic])
Subsystem: Conexant Unknown device 5422
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
Capabilities: <access denied>
02:03.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
Subsystem: Dell Unknown device 014f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0213000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 50000000-53fff000 (prefetchable)
Memory window 1: 5c000000-5ffff000
I/O window 0: 00003000-000030ff
I/O window 1: 00003400-000034ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
02:03.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
Subsystem: Dell Unknown device 014f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin B routed to IRQ 10
Region 0: Memory at e0214000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 54000000-57fff000 (prefetchable)
Memory window 1: 60000000-63fff000
I/O window 0: 00003800-000038ff
I/O window 1: 00003c00-00003cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
02:03.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 04) (prog-if 10 [OHCI])
Subsystem: Dell Unknown device 014f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin C routed to IRQ 11
Region 0: Memory at e0212000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
02:04.0 Network controller: Broadcom Corporation BCM4309 802.11a/b/g (rev 02)
Subsystem: Dell Truemobile 1400
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 5
Region 0: Memory at e0210000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
02:05.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet (rev 01)
Subsystem: Dell Unknown device 2003
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
---- End lspci output ----
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: PROBLEM: "BUG:" when resuming from suspend-to-ram
2007-02-27 18:45 PROBLEM: "BUG:" when resuming from suspend-to-ram Kristian Grønfeldt Sørensen
@ 2007-02-27 22:04 ` Rafael J. Wysocki
2007-02-27 22:23 ` Kristian Grønfeldt Sørensen
2007-02-27 22:30 ` Rafael J. Wysocki
0 siblings, 2 replies; 21+ messages in thread
From: Rafael J. Wysocki @ 2007-02-27 22:04 UTC (permalink / raw)
To: Kristian Grønfeldt Sørensen; +Cc: Linux kernel mailing list
Hi,
On Tuesday, 27 February 2007 19:45, Kristian Grønfeldt Sørensen wrote:
> Hi.
>
> PROBLEM: "BUG:" when resumimg from suspend-to-ram
>
> My laptop have a problem with resuming from suspend-to-ram.
> It does not occur every time - most of the time, resume works without
> any problem.at all.
>
> After it occurs, the laptop refuses to go into suspend-to-ram mode until
> next reboot.
What do you mean by "refuses"? Are there any suspicious messages in
dmesg?
> The system is a Debian unstable running with a self-compiled 2.6.20
> kernel downloaded from kernel.org.
>
> I've only tried suspend-to-ram on 2.6.20 so I don't know whether or not
> other versions might have the same problem.
>
> I'm not subscribed to the list. Please CC me.
I guess one of the drivers you use goes awry at some point. Please provide
us with more information (like dmesg output after a failing resume).
Greetings,
Rafael
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: PROBLEM: "BUG:" when resuming from suspend-to-ram
2007-02-27 22:04 ` Rafael J. Wysocki
@ 2007-02-27 22:23 ` Kristian Grønfeldt Sørensen
2007-02-27 22:34 ` Rafael J. Wysocki
2007-02-27 22:30 ` Rafael J. Wysocki
1 sibling, 1 reply; 21+ messages in thread
From: Kristian Grønfeldt Sørensen @ 2007-02-27 22:23 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: Linux kernel mailing list
On Tue, 2007-02-27 at 23:04 +0100, Rafael J. Wysocki wrote:
> Hi,
>
> On Tuesday, 27 February 2007 19:45, Kristian Grønfeldt Sørensen wrote:
> > Hi.
> >
> > PROBLEM: "BUG:" when resumimg from suspend-to-ram
> >
> > My laptop have a problem with resuming from suspend-to-ram.
> > It does not occur every time - most of the time, resume works without
> > any problem.at all.
> >
> > After it occurs, the laptop refuses to go into suspend-to-ram mode until
> > next reboot.
>
> What do you mean by "refuses"?
As in it does not suspend when i close the lid. It just stays on.
> Are there any suspicious messages in
> dmesg?
No: This what i get just after the stacktrace:
video bus notify
video bus notify
video bus notify
video bus notify
video bus notify
video bus notify
video bus notify
video bus notify
DEV: Unregistering device. ID = 'vcs7'
PM: Removing info for No Bus:vcs7
device_create_release called for vcs7
DEV: Unregistering device. ID = 'vcsa7'
PM: Removing info for No Bus:vcsa7
device_create_release called for vcsa7
DEV: registering device: ID = 'vcs7'
PM: Adding info for No Bus:vcs7
DEV: registering device: ID = 'vcsa7'
PM: Adding info for No Bus:vcsa7
DEV: Unregistering device. ID = 'vcs7'
PM: Removing info for No Bus:vcs7
device_create_release called for vcs7
DEV: Unregistering device. ID = 'vcsa7'
PM: Removing info for No Bus:vcsa7
device_create_release called for vcsa7
The "video bus notify" lines is from attempts to suspend the machine
once again, but as I described above, nothing happens - the computer
stays on.
The rest is from switches between VT's and X.
> > The system is a Debian unstable running with a self-compiled 2.6.20
> > kernel downloaded from kernel.org.
> >
> > I've only tried suspend-to-ram on 2.6.20 so I don't know whether or not
> > other versions might have the same problem.
> >
> > I'm not subscribed to the list. Please CC me.
>
> I guess one of the drivers you use goes awry at some point. Please provide
> us with more information (like dmesg output after a failing resume).
See the above dmesg snippet.
/Kristian
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: PROBLEM: "BUG:" when resuming from suspend-to-ram
2007-02-27 22:04 ` Rafael J. Wysocki
@ 2007-02-27 22:30 ` Rafael J. Wysocki
2007-02-27 22:30 ` Rafael J. Wysocki
1 sibling, 0 replies; 21+ messages in thread
From: Rafael J. Wysocki @ 2007-02-27 22:30 UTC (permalink / raw)
To: Kristian Grønfeldt Sørensen
Cc: Linux kernel mailing list, linux-acpi
On Tuesday, 27 February 2007 23:04, Rafael J. Wysocki wrote:
> Hi,
>
> On Tuesday, 27 February 2007 19:45, Kristian Grønfeldt Sørensen wrote:
> > Hi.
> >
> > PROBLEM: "BUG:" when resumimg from suspend-to-ram
> >
> > My laptop have a problem with resuming from suspend-to-ram.
> > It does not occur every time - most of the time, resume works without
> > any problem.at all.
> >
> > After it occurs, the laptop refuses to go into suspend-to-ram mode until
> > next reboot.
>
> What do you mean by "refuses"? Are there any suspicious messages in
> dmesg?
>
> > The system is a Debian unstable running with a self-compiled 2.6.20
> > kernel downloaded from kernel.org.
> >
> > I've only tried suspend-to-ram on 2.6.20 so I don't know whether or not
> > other versions might have the same problem.
> >
> > I'm not subscribed to the list. Please CC me.
>
> I guess one of the drivers you use goes awry at some point. Please provide
> us with more information (like dmesg output after a failing resume).
I'm sorry, I've just been told you sent it. :-)
> CLASS: Unregistering class device. ID = 'event3'
> class_uevent - name = event3
> class_device_create_uevent called for event3
> device class 'event3': release.
> class_device_create_release called for event3
> BUG: unable to handle kernel paging request at virtual address 6b6b6b6b
> printing eip:
> f8825a81
> *pde = 00000000
> Oops: 0000 [#1]
> PREEMPT
> Modules linked in: tg3 battery ac thermal fan button i915 drm binfmt_misc
> rfcomm l2cap ipv6 fuse capability commoncap cpufreq_performance aoe
> af_packet nls_utf8 ntfs nls_iso8859_1 nls_cp437 vfat fat dm_snapshot
> dm_mirror dm_mod ieee80211_cr ypt_tkip ieee80211_crypt pd6729 snd_seq_dummy
> snd_seq_oss snd_seq_midi snd_rawmi di snd_seq_midi_event snd_seq
> snd_seq_device sermouse hci_vhci hci_uart wbsd mmc _block mmc_core tun msr
> cpuid cpufreq_stats container video speedstep_lib speeds tep_centrino
> processor sr_mod sbp2 scsi_mod ide_cd cdrom eth1394 hci_usb bluetoo th
> pcmcia firmware_class irda snd_intel8x0m snd_intel8x0 snd_ac97_codec
> crc_ccit t ac97_bus snd_pcm_oss snd_mixer_oss rtc i2c_i801 snd_pcm
> snd_timer ohci1394 iee e1394 i2c_core serio_raw intel_agp iTCO_wdt snd
> soundcore snd_page_alloc ehci_hc d pcspkr uhci_hcd yenta_socket
> rsrc_nonstatic pcmcia_core usbcore agpgart moused ev evdev
> CPU: 0
> EIP: 0060:[<f8825a81>] Not tainted VLI
> EFLAGS: 00010202 (2.6.20-x300 #1)
> EIP is at evdev_disconnect+0xb1/0xe0 [evdev]
This points us to a suspect. Can you please run "gdb vmlinux" against the
vmlinux in your kernel sources directory and then
gdb> l *evdev_disconnect+0xb1
> eax: 00000000 ebx: 6b6b675b ecx: 10000000 edx: 00000000
> esi: f73212a8 edi: f6dcf5c4 ebp: e6f31f04 esp: e6f31ef8
> ds: 007b es: 007b ss: 0068
> Process modprobe (pid: 9025, ti=e6f30000 task=ef56a070 task.ti=e6f30000)
> Stack: 00000000 f6ca2528 f7321264 e6f31f24 c02a899f 00000000 f6dcfcf0
> f6dcfcf0 f253ce90 c1a3002c c1a610a4 e6f31f34 f8ccd0c5 f8ccece0 c1a3002c
> e6f31f48 c0263225 00000000 f8ccee00 00000000 e6f31f50 f8ccd7d1 e6f31fb0
> c013e772 Call Trace:
> [<c01041ea>] show_trace_log_lvl+0x1a/0x30
> [<c01042a9>] show_stack_log_lvl+0xa9/0xd0
> [<c01044bf>] show_registers+0x1ef/0x360
> [<c0104734>] die+0x104/0x240
> [<c0115ba5>] do_page_fault+0x2b5/0x5c0
> [<c0335b5c>] error_code+0x74/0x7c
> [<c02a899f>] input_unregister_device+0xaf/0x160
> [<f8ccd0c5>] acpi_button_remove+0x2b/0x3f [button]
> [<c0263225>] acpi_bus_unregister_driver+0x40/0xaa
> [<f8ccd7d1>] acpi_button_exit+0xd/0x6a [button]
> [<c013e772>] sys_delete_module+0x142/0x1b0
> [<c0103220>] syscall_call+0x7/0xb
> =======================
> Code: f0 74 3c 8d b4 26 00 00 00 00 8d 83 08 04 00 00 b9 06 00 02 00 ba 1d
> 00 00
> 00 e8 eb 54 95 c7 8b 9b 10 04 00 00 81 eb 10 04 00 00 <8b>
> 83 10 04 00 00 0f 18
> 00 90 8d 83 10 04 00 00 39 f0 75 cb 5b EIP:
> [<f8825a81>] evdev_disconnect+0xb1/0xe0 [evdev] SS:ESP 0068:e6f31ef8
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: PROBLEM: "BUG:" when resuming from suspend-to-ram
@ 2007-02-27 22:30 ` Rafael J. Wysocki
0 siblings, 0 replies; 21+ messages in thread
From: Rafael J. Wysocki @ 2007-02-27 22:30 UTC (permalink / raw)
To: Kristian Grønfeldt Sørensen
Cc: Linux kernel mailing list, linux-acpi
On Tuesday, 27 February 2007 23:04, Rafael J. Wysocki wrote:
> Hi,
>
> On Tuesday, 27 February 2007 19:45, Kristian Grønfeldt Sørensen wrote:
> > Hi.
> >
> > PROBLEM: "BUG:" when resumimg from suspend-to-ram
> >
> > My laptop have a problem with resuming from suspend-to-ram.
> > It does not occur every time - most of the time, resume works without
> > any problem.at all.
> >
> > After it occurs, the laptop refuses to go into suspend-to-ram mode until
> > next reboot.
>
> What do you mean by "refuses"? Are there any suspicious messages in
> dmesg?
>
> > The system is a Debian unstable running with a self-compiled 2.6.20
> > kernel downloaded from kernel.org.
> >
> > I've only tried suspend-to-ram on 2.6.20 so I don't know whether or not
> > other versions might have the same problem.
> >
> > I'm not subscribed to the list. Please CC me.
>
> I guess one of the drivers you use goes awry at some point. Please provide
> us with more information (like dmesg output after a failing resume).
I'm sorry, I've just been told you sent it. :-)
> CLASS: Unregistering class device. ID = 'event3'
> class_uevent - name = event3
> class_device_create_uevent called for event3
> device class 'event3': release.
> class_device_create_release called for event3
> BUG: unable to handle kernel paging request at virtual address 6b6b6b6b
> printing eip:
> f8825a81
> *pde = 00000000
> Oops: 0000 [#1]
> PREEMPT
> Modules linked in: tg3 battery ac thermal fan button i915 drm binfmt_misc
> rfcomm l2cap ipv6 fuse capability commoncap cpufreq_performance aoe
> af_packet nls_utf8 ntfs nls_iso8859_1 nls_cp437 vfat fat dm_snapshot
> dm_mirror dm_mod ieee80211_cr ypt_tkip ieee80211_crypt pd6729 snd_seq_dummy
> snd_seq_oss snd_seq_midi snd_rawmi di snd_seq_midi_event snd_seq
> snd_seq_device sermouse hci_vhci hci_uart wbsd mmc _block mmc_core tun msr
> cpuid cpufreq_stats container video speedstep_lib speeds tep_centrino
> processor sr_mod sbp2 scsi_mod ide_cd cdrom eth1394 hci_usb bluetoo th
> pcmcia firmware_class irda snd_intel8x0m snd_intel8x0 snd_ac97_codec
> crc_ccit t ac97_bus snd_pcm_oss snd_mixer_oss rtc i2c_i801 snd_pcm
> snd_timer ohci1394 iee e1394 i2c_core serio_raw intel_agp iTCO_wdt snd
> soundcore snd_page_alloc ehci_hc d pcspkr uhci_hcd yenta_socket
> rsrc_nonstatic pcmcia_core usbcore agpgart moused ev evdev
> CPU: 0
> EIP: 0060:[<f8825a81>] Not tainted VLI
> EFLAGS: 00010202 (2.6.20-x300 #1)
> EIP is at evdev_disconnect+0xb1/0xe0 [evdev]
This points us to a suspect. Can you please run "gdb vmlinux" against the
vmlinux in your kernel sources directory and then
gdb> l *evdev_disconnect+0xb1
> eax: 00000000 ebx: 6b6b675b ecx: 10000000 edx: 00000000
> esi: f73212a8 edi: f6dcf5c4 ebp: e6f31f04 esp: e6f31ef8
> ds: 007b es: 007b ss: 0068
> Process modprobe (pid: 9025, ti=e6f30000 task=ef56a070 task.ti=e6f30000)
> Stack: 00000000 f6ca2528 f7321264 e6f31f24 c02a899f 00000000 f6dcfcf0
> f6dcfcf0 f253ce90 c1a3002c c1a610a4 e6f31f34 f8ccd0c5 f8ccece0 c1a3002c
> e6f31f48 c0263225 00000000 f8ccee00 00000000 e6f31f50 f8ccd7d1 e6f31fb0
> c013e772 Call Trace:
> [<c01041ea>] show_trace_log_lvl+0x1a/0x30
> [<c01042a9>] show_stack_log_lvl+0xa9/0xd0
> [<c01044bf>] show_registers+0x1ef/0x360
> [<c0104734>] die+0x104/0x240
> [<c0115ba5>] do_page_fault+0x2b5/0x5c0
> [<c0335b5c>] error_code+0x74/0x7c
> [<c02a899f>] input_unregister_device+0xaf/0x160
> [<f8ccd0c5>] acpi_button_remove+0x2b/0x3f [button]
> [<c0263225>] acpi_bus_unregister_driver+0x40/0xaa
> [<f8ccd7d1>] acpi_button_exit+0xd/0x6a [button]
> [<c013e772>] sys_delete_module+0x142/0x1b0
> [<c0103220>] syscall_call+0x7/0xb
> =======================
> Code: f0 74 3c 8d b4 26 00 00 00 00 8d 83 08 04 00 00 b9 06 00 02 00 ba 1d
> 00 00
> 00 e8 eb 54 95 c7 8b 9b 10 04 00 00 81 eb 10 04 00 00 <8b>
> 83 10 04 00 00 0f 18
> 00 90 8d 83 10 04 00 00 39 f0 75 cb 5b EIP:
> [<f8825a81>] evdev_disconnect+0xb1/0xe0 [evdev] SS:ESP 0068:e6f31ef8
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: PROBLEM: "BUG:" when resuming from suspend-to-ram
2007-02-27 22:23 ` Kristian Grønfeldt Sørensen
@ 2007-02-27 22:34 ` Rafael J. Wysocki
2007-02-27 23:12 ` Kristian Grønfeldt Sørensen
0 siblings, 1 reply; 21+ messages in thread
From: Rafael J. Wysocki @ 2007-02-27 22:34 UTC (permalink / raw)
To: Kristian Grønfeldt Sørensen; +Cc: Linux kernel mailing list
On Tuesday, 27 February 2007 23:23, Kristian Grønfeldt Sørensen wrote:
> On Tue, 2007-02-27 at 23:04 +0100, Rafael J. Wysocki wrote:
> > Hi,
> >
> > On Tuesday, 27 February 2007 19:45, Kristian Grønfeldt Sørensen wrote:
> > > Hi.
> > >
> > > PROBLEM: "BUG:" when resumimg from suspend-to-ram
> > >
> > > My laptop have a problem with resuming from suspend-to-ram.
> > > It does not occur every time - most of the time, resume works without
> > > any problem.at all.
> > >
> > > After it occurs, the laptop refuses to go into suspend-to-ram mode until
> > > next reboot.
> >
> > What do you mean by "refuses"?
>
> As in it does not suspend when i close the lid. It just stays on.
Hm, it doesn't seem to attempt to suspend. Can you just do
"echo mem > /sys/power/state" when it's in that state and see what happens?
Rafael
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: PROBLEM: "BUG:" when resuming from suspend-to-ram
2007-02-27 22:34 ` Rafael J. Wysocki
@ 2007-02-27 23:12 ` Kristian Grønfeldt Sørensen
2007-02-28 0:05 ` Rafael J. Wysocki
0 siblings, 1 reply; 21+ messages in thread
From: Kristian Grønfeldt Sørensen @ 2007-02-27 23:12 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: Linux kernel mailing list
On Tue, 2007-02-27 at 23:34 +0100, Rafael J. Wysocki wrote:
> On Tuesday, 27 February 2007 23:23, Kristian Grønfeldt Sørensen wrote:
> > On Tue, 2007-02-27 at 23:04 +0100, Rafael J. Wysocki wrote:
> > > Hi,
> > >
> > > On Tuesday, 27 February 2007 19:45, Kristian Grønfeldt Sørensen wrote:
> > > > Hi.
> > > >
> > > > PROBLEM: "BUG:" when resumimg from suspend-to-ram
> > > >
> > > > My laptop have a problem with resuming from suspend-to-ram.
> > > > It does not occur every time - most of the time, resume works without
> > > > any problem.at all.
> > > >
> > > > After it occurs, the laptop refuses to go into suspend-to-ram mode until
> > > > next reboot.
> > >
> > > What do you mean by "refuses"?
> >
> > As in it does not suspend when i close the lid. It just stays on.
>
> Hm, it doesn't seem to attempt to suspend. Can you just do
> "echo mem > /sys/power/state" when it's in that state and see what happens?
Hmmm. That works. (except for video restore - forgot to save
vbe-state :-( )
Resume also worked.
/Kristian
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: PROBLEM: "BUG:" when resuming from suspend-to-ram
2007-02-27 23:12 ` Kristian Grønfeldt Sørensen
@ 2007-02-28 0:05 ` Rafael J. Wysocki
2007-02-28 0:33 ` Kristian Grønfeldt Sørensen
0 siblings, 1 reply; 21+ messages in thread
From: Rafael J. Wysocki @ 2007-02-28 0:05 UTC (permalink / raw)
To: Kristian Grønfeldt Sørensen; +Cc: Linux kernel mailing list
On Wednesday, 28 February 2007 00:12, Kristian Grønfeldt Sørensen wrote:
> On Tue, 2007-02-27 at 23:34 +0100, Rafael J. Wysocki wrote:
> > On Tuesday, 27 February 2007 23:23, Kristian Grønfeldt Sørensen wrote:
> > > On Tue, 2007-02-27 at 23:04 +0100, Rafael J. Wysocki wrote:
> > > > Hi,
> > > >
> > > > On Tuesday, 27 February 2007 19:45, Kristian Grønfeldt Sørensen wrote:
> > > > > Hi.
> > > > >
> > > > > PROBLEM: "BUG:" when resumimg from suspend-to-ram
> > > > >
> > > > > My laptop have a problem with resuming from suspend-to-ram.
> > > > > It does not occur every time - most of the time, resume works without
> > > > > any problem.at all.
> > > > >
> > > > > After it occurs, the laptop refuses to go into suspend-to-ram mode until
> > > > > next reboot.
> > > >
> > > > What do you mean by "refuses"?
> > >
> > > As in it does not suspend when i close the lid. It just stays on.
> >
> > Hm, it doesn't seem to attempt to suspend. Can you just do
> > "echo mem > /sys/power/state" when it's in that state and see what happens?
>
> Hmmm. That works. (except for video restore - forgot to save
> vbe-state :-( )
Please see: http://en.opensuse.org/s2ram
> Resume also worked.
Well, this means that at some point your lid switch driver explodes and doesn't
work any more (the oops trace you've sent suggests something like this). The
problem seems to be ACPI-related.
Greetings,
Rafael
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: PROBLEM: "BUG:" when resuming from suspend-to-ram
2007-02-27 22:30 ` Rafael J. Wysocki
(?)
@ 2007-02-28 0:27 ` Kristian Grønfeldt Sørensen
2007-02-28 12:45 ` Rafael J. Wysocki
-1 siblings, 1 reply; 21+ messages in thread
From: Kristian Grønfeldt Sørensen @ 2007-02-28 0:27 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: Linux kernel mailing list, linux-acpi
On Tue, 2007-02-27 at 23:30 +0100, Rafael J. Wysocki wrote:
> On Tuesday, 27 February 2007 23:04, Rafael J. Wysocki wrote:
> > Hi,
> >
> > On Tuesday, 27 February 2007 19:45, Kristian Grønfeldt Sørensen wrote:
> > > Hi.
> > >
> > > PROBLEM: "BUG:" when resumimg from suspend-to-ram
> > >
> > > My laptop have a problem with resuming from suspend-to-ram.
> > > It does not occur every time - most of the time, resume works without
> > > any problem.at all.
> > >
> > > After it occurs, the laptop refuses to go into suspend-to-ram mode until
> > > next reboot.
> >
> > What do you mean by "refuses"? Are there any suspicious messages in
> > dmesg?
> >
> > > The system is a Debian unstable running with a self-compiled 2.6.20
> > > kernel downloaded from kernel.org.
> > >
> > > I've only tried suspend-to-ram on 2.6.20 so I don't know whether or not
> > > other versions might have the same problem.
> > >
> > > I'm not subscribed to the list. Please CC me.
> >
> > I guess one of the drivers you use goes awry at some point. Please provide
> > us with more information (like dmesg output after a failing resume).
>
> I'm sorry, I've just been told you sent it. :-)
>
> > CLASS: Unregistering class device. ID = 'event3'
> > class_uevent - name = event3
> > class_device_create_uevent called for event3
> > device class 'event3': release.
> > class_device_create_release called for event3
> > BUG: unable to handle kernel paging request at virtual address 6b6b6b6b
> > printing eip:
> > f8825a81
> > *pde = 00000000
> > Oops: 0000 [#1]
> > PREEMPT
> > Modules linked in: tg3 battery ac thermal fan button i915 drm binfmt_misc
> > rfcomm l2cap ipv6 fuse capability commoncap cpufreq_performance aoe
> > af_packet nls_utf8 ntfs nls_iso8859_1 nls_cp437 vfat fat dm_snapshot
> > dm_mirror dm_mod ieee80211_cr ypt_tkip ieee80211_crypt pd6729 snd_seq_dummy
> > snd_seq_oss snd_seq_midi snd_rawmi di snd_seq_midi_event snd_seq
> > snd_seq_device sermouse hci_vhci hci_uart wbsd mmc _block mmc_core tun msr
> > cpuid cpufreq_stats container video speedstep_lib speeds tep_centrino
> > processor sr_mod sbp2 scsi_mod ide_cd cdrom eth1394 hci_usb bluetoo th
> > pcmcia firmware_class irda snd_intel8x0m snd_intel8x0 snd_ac97_codec
> > crc_ccit t ac97_bus snd_pcm_oss snd_mixer_oss rtc i2c_i801 snd_pcm
> > snd_timer ohci1394 iee e1394 i2c_core serio_raw intel_agp iTCO_wdt snd
> > soundcore snd_page_alloc ehci_hc d pcspkr uhci_hcd yenta_socket
> > rsrc_nonstatic pcmcia_core usbcore agpgart moused ev evdev
> > CPU: 0
> > EIP: 0060:[<f8825a81>] Not tainted VLI
> > EFLAGS: 00010202 (2.6.20-x300 #1)
> > EIP is at evdev_disconnect+0xb1/0xe0 [evdev]
>
> This points us to a suspect. Can you please run "gdb vmlinux" against the
> vmlinux in your kernel sources directory and then
>
> gdb> l *evdev_disconnect+0xb1
OK. Recopiled the kernel with CONFIG_DEBUG_INFO=y
This gives:
(gdb) l *evdev_disconnect+0xb1
No symbol "evdev_disconnect" in current context.
I guess you meant gdb drivers/input/evdev.ko
This gives:
(gdb) l *evdev_disconnect+0xb1
0xa81 is in evdev_disconnect (include/asm/processor.h:716).
711 However we don't do prefetches for pre XP Athlons currently
712 That should be fixed. */
713 #define ARCH_HAS_PREFETCH
714 static inline void prefetch(const void *x)
715 {
716 alternative_input(ASM_NOP4,
717 "prefetchnta (%1)",
718 X86_FEATURE_XMM,
719 "r" (x));
720 }
/Kristian
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: PROBLEM: "BUG:" when resuming from suspend-to-ram
2007-02-28 0:05 ` Rafael J. Wysocki
@ 2007-02-28 0:33 ` Kristian Grønfeldt Sørensen
0 siblings, 0 replies; 21+ messages in thread
From: Kristian Grønfeldt Sørensen @ 2007-02-28 0:33 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: Linux kernel mailing list
On Wed, 2007-02-28 at 01:05 +0100, Rafael J. Wysocki wrote:
> On Wednesday, 28 February 2007 00:12, Kristian Grønfeldt Sørensen wrote:
> > On Tue, 2007-02-27 at 23:34 +0100, Rafael J. Wysocki wrote:
> > > On Tuesday, 27 February 2007 23:23, Kristian Grønfeldt Sørensen wrote:
> > > > On Tue, 2007-02-27 at 23:04 +0100, Rafael J. Wysocki wrote:
> > > > > Hi,
> > > > >
> > > > > On Tuesday, 27 February 2007 19:45, Kristian Grønfeldt Sørensen wrote:
> > > > > > Hi.
> > > > > >
> > > > > > PROBLEM: "BUG:" when resumimg from suspend-to-ram
> > > > > >
> > > > > > My laptop have a problem with resuming from suspend-to-ram.
> > > > > > It does not occur every time - most of the time, resume works without
> > > > > > any problem.at all.
> > > > > >
> > > > > > After it occurs, the laptop refuses to go into suspend-to-ram mode until
> > > > > > next reboot.
> > > > > I'm
> > > > > What do you mean by "refuses"?
> > > >
> > > > As in it does not suspend when i close the lid. It just stays on.
> > >
> > > Hm, it doesn't seem to attempt to suspend. Can you just do
> > > "echo mem > /sys/power/state" when it's in that state and see what happens?
> >
> > Hmmm. That works. (except for video restore - forgot to save
> > vbe-state :-( )
>
> Please see: http://en.opensuse.org/s2ram
Looks interesting. I'll give it a try.
Thanks.
/Kristian
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: PROBLEM: "BUG:" when resuming from suspend-to-ram
2007-02-28 0:27 ` Kristian Grønfeldt Sørensen
@ 2007-02-28 12:45 ` Rafael J. Wysocki
2007-03-01 5:36 ` Dmitry Torokhov
0 siblings, 1 reply; 21+ messages in thread
From: Rafael J. Wysocki @ 2007-02-28 12:45 UTC (permalink / raw)
To: Kristian Grønfeldt Sørensen
Cc: Linux kernel mailing list, linux-input
On Wednesday, 28 February 2007 01:27, Kristian Grønfeldt Sørensen wrote:
> On Tue, 2007-02-27 at 23:30 +0100, Rafael J. Wysocki wrote:
> > On Tuesday, 27 February 2007 23:04, Rafael J. Wysocki wrote:
> > > Hi,
> > >
> > > On Tuesday, 27 February 2007 19:45, Kristian Grønfeldt Sørensen wrote:
> > > > Hi.
> > > >
> > > > PROBLEM: "BUG:" when resumimg from suspend-to-ram
> > > >
> > > > My laptop have a problem with resuming from suspend-to-ram.
> > > > It does not occur every time - most of the time, resume works without
> > > > any problem.at all.
> > > >
> > > > After it occurs, the laptop refuses to go into suspend-to-ram mode until
> > > > next reboot.
> > >
> > > What do you mean by "refuses"? Are there any suspicious messages in
> > > dmesg?
> > >
> > > > The system is a Debian unstable running with a self-compiled 2.6.20
> > > > kernel downloaded from kernel.org.
> > > >
> > > > I've only tried suspend-to-ram on 2.6.20 so I don't know whether or not
> > > > other versions might have the same problem.
> > > >
> > > > I'm not subscribed to the list. Please CC me.
> > >
> > > I guess one of the drivers you use goes awry at some point. Please provide
> > > us with more information (like dmesg output after a failing resume).
> >
> > I'm sorry, I've just been told you sent it. :-)
> >
> > > CLASS: Unregistering class device. ID = 'event3'
> > > class_uevent - name = event3
> > > class_device_create_uevent called for event3
> > > device class 'event3': release.
> > > class_device_create_release called for event3
> > > BUG: unable to handle kernel paging request at virtual address 6b6b6b6b
> > > printing eip:
> > > f8825a81
> > > *pde = 00000000
> > > Oops: 0000 [#1]
> > > PREEMPT
> > > Modules linked in: tg3 battery ac thermal fan button i915 drm binfmt_misc
> > > rfcomm l2cap ipv6 fuse capability commoncap cpufreq_performance aoe
> > > af_packet nls_utf8 ntfs nls_iso8859_1 nls_cp437 vfat fat dm_snapshot
> > > dm_mirror dm_mod ieee80211_cr ypt_tkip ieee80211_crypt pd6729 snd_seq_dummy
> > > snd_seq_oss snd_seq_midi snd_rawmi di snd_seq_midi_event snd_seq
> > > snd_seq_device sermouse hci_vhci hci_uart wbsd mmc _block mmc_core tun msr
> > > cpuid cpufreq_stats container video speedstep_lib speeds tep_centrino
> > > processor sr_mod sbp2 scsi_mod ide_cd cdrom eth1394 hci_usb bluetoo th
> > > pcmcia firmware_class irda snd_intel8x0m snd_intel8x0 snd_ac97_codec
> > > crc_ccit t ac97_bus snd_pcm_oss snd_mixer_oss rtc i2c_i801 snd_pcm
> > > snd_timer ohci1394 iee e1394 i2c_core serio_raw intel_agp iTCO_wdt snd
> > > soundcore snd_page_alloc ehci_hc d pcspkr uhci_hcd yenta_socket
> > > rsrc_nonstatic pcmcia_core usbcore agpgart moused ev evdev
> > > CPU: 0
> > > EIP: 0060:[<f8825a81>] Not tainted VLI
> > > EFLAGS: 00010202 (2.6.20-x300 #1)
> > > EIP is at evdev_disconnect+0xb1/0xe0 [evdev]
> >
> > This points us to a suspect. Can you please run "gdb vmlinux" against the
> > vmlinux in your kernel sources directory and then
> >
> > gdb> l *evdev_disconnect+0xb1
>
> OK. Recopiled the kernel with CONFIG_DEBUG_INFO=y
>
> This gives:
>
> (gdb) l *evdev_disconnect+0xb1
> No symbol "evdev_disconnect" in current context.
>
> I guess you meant gdb drivers/input/evdev.ko
Yes, exactly.
> This gives:
>
> (gdb) l *evdev_disconnect+0xb1
> 0xa81 is in evdev_disconnect (include/asm/processor.h:716).
> 711 However we don't do prefetches for pre XP Athlons currently
> 712 That should be fixed. */
> 713 #define ARCH_HAS_PREFETCH
> 714 static inline void prefetch(const void *x)
> 715 {
> 716 alternative_input(ASM_NOP4,
> 717 "prefetchnta (%1)",
> 718 X86_FEATURE_XMM,
> 719 "r" (x));
> 720 }
Hm, interesting. Looks like a pointer points to nowhere in
input_unregister_device(), but I don't know which one. This may be
an evdev problem ...
Rafael
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: PROBLEM: "BUG:" when resuming from suspend-to-ram
2007-02-28 12:45 ` Rafael J. Wysocki
@ 2007-03-01 5:36 ` Dmitry Torokhov
2007-03-01 14:55 ` Kristian Grønfeldt Sørensen
2007-03-01 20:04 ` Kristian Grønfeldt Sørensen
0 siblings, 2 replies; 21+ messages in thread
From: Dmitry Torokhov @ 2007-03-01 5:36 UTC (permalink / raw)
To: linux-input
Cc: Rafael J. Wysocki, Kristian Grønfeldt Sørensen,
Linux kernel mailing list
On Wednesday 28 February 2007 07:45, Rafael J. Wysocki wrote:
>
> > This gives:
> >
> > (gdb) l *evdev_disconnect+0xb1
> > 0xa81 is in evdev_disconnect (include/asm/processor.h:716).
> > 711 However we don't do prefetches for pre XP Athlons currently
> > 712 That should be fixed. */
> > 713 #define ARCH_HAS_PREFETCH
> > 714 static inline void prefetch(const void *x)
> > 715 {
> > 716 alternative_input(ASM_NOP4,
> > 717 "prefetchnta (%1)",
> > 718 X86_FEATURE_XMM,
> > 719 "r" (x));
> > 720 }
>
> Hm, interesting. Looks like a pointer points to nowhere in
> input_unregister_device(), but I don't know which one. This may be
> an evdev problem ...
>
Please try the patch below.
--
Dmitry
Input: use krefs for refcounting in input handlers
This should fix problems whith accessing memory already freed by
another thread.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/evdev.c | 62 ++++++++++-------
drivers/input/joydev.c | 51 +++++++++-----
drivers/input/mousedev.c | 166 +++++++++++++++++++++++++++++++++--------------
drivers/input/tsdev.c | 65 +++++++++++-------
4 files changed, 227 insertions(+), 117 deletions(-)
Index: work/drivers/input/evdev.c
===================================================================
--- work.orig/drivers/input/evdev.c
+++ work/drivers/input/evdev.c
@@ -29,8 +29,10 @@ struct evdev {
char name[16];
struct input_handle handle;
wait_queue_head_t wait;
- struct evdev_list *grab;
+ struct kref kref;
struct list_head list;
+
+ struct evdev_list *grab;
};
struct evdev_list {
@@ -94,53 +96,62 @@ static int evdev_flush(struct file *file
return input_flush_device(&list->evdev->handle, file);
}
-static void evdev_free(struct evdev *evdev)
+static void evdev_free(struct kref *kref)
{
+ struct evdev *evdev = container_of(kref, struct evdev, kref);
+
evdev_table[evdev->minor] = NULL;
kfree(evdev);
}
-static int evdev_release(struct inode * inode, struct file * file)
+static int evdev_release(struct inode *inode, struct file *file)
{
struct evdev_list *list = file->private_data;
+ struct evdev *evdev = list->evdev;
- if (list->evdev->grab == list) {
- input_release_device(&list->evdev->handle);
- list->evdev->grab = NULL;
+ if (evdev->grab == list) {
+ input_release_device(&evdev->handle);
+ evdev->grab = NULL;
}
evdev_fasync(-1, file, 0);
+
list_del(&list->node);
+ kfree(list);
- if (!--list->evdev->open) {
- if (list->evdev->exist)
- input_close_device(&list->evdev->handle);
- else
- evdev_free(list->evdev);
- }
+ if (!--evdev->open && evdev->exist)
+ input_close_device(&evdev->handle);
+
+ kref_put(&evdev->kref, evdev_free);
- kfree(list);
return 0;
}
-static int evdev_open(struct inode * inode, struct file * file)
+static int evdev_open(struct inode *inode, struct file *file)
{
struct evdev_list *list;
+ struct evdev *evdev;
int i = iminor(inode) - EVDEV_MINOR_BASE;
- if (i >= EVDEV_MINORS || !evdev_table[i] || !evdev_table[i]->exist)
+ if (i >= EVDEV_MINORS)
+ return -ENODEV;
+
+ evdev = evdev_table[i];
+ if (!evdev || !evdev->exist)
return -ENODEV;
- if (!(list = kzalloc(sizeof(struct evdev_list), GFP_KERNEL)))
+ list = kzalloc(sizeof(struct evdev_list), GFP_KERNEL);
+ if (!list)
return -ENOMEM;
- list->evdev = evdev_table[i];
- list_add_tail(&list->node, &evdev_table[i]->list);
+ kref_get(&evdev->kref);
+
+ list->evdev = evdev;
+ list_add_tail(&list->node, &evdev->list);
file->private_data = list;
- if (!list->evdev->open++)
- if (list->evdev->exist)
- input_open_device(&list->evdev->handle);
+ if (!evdev->open++ && evdev->exist)
+ input_open_device(&evdev->handle);
return 0;
}
@@ -629,9 +640,11 @@ static struct input_handle *evdev_connec
return NULL;
}
- if (!(evdev = kzalloc(sizeof(struct evdev), GFP_KERNEL)))
+ evdev = kzalloc(sizeof(struct evdev), GFP_KERNEL);
+ if (!evdev)
return NULL;
+ kref_init(&evdev->kref);
INIT_LIST_HEAD(&evdev->list);
init_waitqueue_head(&evdev->wait);
@@ -672,8 +685,9 @@ static void evdev_disconnect(struct inpu
wake_up_interruptible(&evdev->wait);
list_for_each_entry(list, &evdev->list, node)
kill_fasync(&list->fasync, SIGIO, POLL_HUP);
- } else
- evdev_free(evdev);
+ }
+
+ kref_put(&evdev->kref, evdev_free);
}
static const struct input_device_id evdev_ids[] = {
Index: work/drivers/input/joydev.c
===================================================================
--- work.orig/drivers/input/joydev.c
+++ work/drivers/input/joydev.c
@@ -43,7 +43,9 @@ struct joydev {
char name[16];
struct input_handle handle;
wait_queue_head_t wait;
+ struct kref kref;
struct list_head list;
+
struct js_corr corr[ABS_MAX + 1];
struct JS_DATA_SAVE_TYPE glue;
int nabs;
@@ -139,8 +141,10 @@ static int joydev_fasync(int fd, struct
return retval < 0 ? retval : 0;
}
-static void joydev_free(struct joydev *joydev)
+static void joydev_free(struct kref *kref)
{
+ struct joydev *joydev = container_of(kref, struct joydev, kref);
+
joydev_table[joydev->minor] = NULL;
kfree(joydev);
}
@@ -148,40 +152,46 @@ static void joydev_free(struct joydev *j
static int joydev_release(struct inode * inode, struct file * file)
{
struct joydev_list *list = file->private_data;
+ struct joydev *joydev = list->joydev;
joydev_fasync(-1, file, 0);
list_del(&list->node);
+ kfree(list);
- if (!--list->joydev->open) {
- if (list->joydev->exist)
- input_close_device(&list->joydev->handle);
- else
- joydev_free(list->joydev);
- }
+ if (!--joydev->open && joydev->exist)
+ input_close_device(&list->joydev->handle);
+
+ kref_put(&joydev->kref, joydev_free);
- kfree(list);
return 0;
}
static int joydev_open(struct inode *inode, struct file *file)
{
struct joydev_list *list;
+ struct joydev *joydev;
int i = iminor(inode) - JOYDEV_MINOR_BASE;
- if (i >= JOYDEV_MINORS || !joydev_table[i])
+ if (i >= JOYDEV_MINORS)
return -ENODEV;
- if (!(list = kzalloc(sizeof(struct joydev_list), GFP_KERNEL)))
+ joydev = joydev_table[i];
+ if (!joydev || !joydev->exist)
+ return -ENODEV;
+
+ list = kzalloc(sizeof(struct joydev_list), GFP_KERNEL);
+ if (!list)
return -ENOMEM;
- list->joydev = joydev_table[i];
- list_add_tail(&list->node, &joydev_table[i]->list);
+ kref_get(&joydev->kref);
+
+ list->joydev = joydev;
+ list_add_tail(&list->node, &joydev->list);
file->private_data = list;
- if (!list->joydev->open++)
- if (list->joydev->exist)
- input_open_device(&list->joydev->handle);
+ if (!joydev->open++ && joydev->exist)
+ input_open_device(&list->joydev->handle);
return 0;
}
@@ -198,7 +208,7 @@ static ssize_t joydev_read(struct file *
struct input_dev *input = joydev->handle.dev;
int retval = 0;
- if (!list->joydev->exist)
+ if (!joydev->exist)
return -ENODEV;
if (count < sizeof(struct js_event))
@@ -478,9 +488,11 @@ static struct input_handle *joydev_conne
return NULL;
}
- if (!(joydev = kzalloc(sizeof(struct joydev), GFP_KERNEL)))
+ joydev = kzalloc(sizeof(struct joydev), GFP_KERNEL);
+ if (!joydev)
return NULL;
+ kref_init(&joydev->kref);
INIT_LIST_HEAD(&joydev->list);
init_waitqueue_head(&joydev->wait);
@@ -559,8 +571,9 @@ static void joydev_disconnect(struct inp
wake_up_interruptible(&joydev->wait);
list_for_each_entry(list, &joydev->list, node)
kill_fasync(&list->fasync, SIGIO, POLL_HUP);
- } else
- joydev_free(joydev);
+ }
+
+ kref_put(&joydev->kref, joydev_free);
}
static const struct input_device_id joydev_blacklist[] = {
Index: work/drivers/input/mousedev.c
===================================================================
--- work.orig/drivers/input/mousedev.c
+++ work/drivers/input/mousedev.c
@@ -62,9 +62,13 @@ struct mousedev {
int open;
int minor;
char name[16];
+ struct input_handle handle;
wait_queue_head_t wait;
+ struct kref kref;
struct list_head list;
- struct input_handle handle;
+
+ struct list_head mixdev_node;
+ int mixdev_open;
struct mousedev_hw_data packet;
unsigned int pkt_count;
@@ -111,6 +115,8 @@ static struct input_handler mousedev_han
static struct mousedev *mousedev_table[MOUSEDEV_MINORS];
static struct mousedev mousedev_mix;
+static LIST_HEAD(mousedev_mix_list);
+static DEFINE_MUTEX(mousedev_mix_mutex);
#define fx(i) (mousedev->old_x[(mousedev->pkt_count - (i)) & 03])
#define fy(i) (mousedev->old_y[(mousedev->pkt_count - (i)) & 03])
@@ -358,55 +364,112 @@ static int mousedev_fasync(int fd, struc
return retval < 0 ? retval : 0;
}
-static void mousedev_free(struct mousedev *mousedev)
+static void mousedev_free(struct kref *kref)
{
+ struct mousedev *mousedev = container_of(kref, struct mousedev, kref);
+
mousedev_table[mousedev->minor] = NULL;
kfree(mousedev);
}
-static void mixdev_release(void)
+static int mixdev_add_device(struct mousedev *mousedev)
+{
+ int retval = 0;
+
+ mutex_lock(&mousedev_mix_mutex);
+
+ if (mousedev_mix.open) {
+ if (!mousedev->open && mousedev->exist) {
+ retval = input_open_device(&mousedev->handle);
+ if (retval)
+ goto out;
+
+ mousedev->open++;
+ }
+ mousedev->mixdev_open++;
+ }
+
+ list_add_tail(&mousedev->mixdev_node, &mousedev_mix_list);
+
+ out:
+ mutex_unlock(&mousedev_mix_mutex);
+ return retval;
+}
+
+static void mixdev_remove_device(struct mousedev *mousedev)
{
- struct input_handle *handle;
+ mutex_lock(&mousedev_mix_mutex);
- list_for_each_entry(handle, &mousedev_handler.h_list, h_node) {
- struct mousedev *mousedev = handle->private;
+ if (!--mousedev->mixdev_open)
+ if (!--mousedev->open && mousedev->exist)
+ input_close_device(&mousedev->handle);
- if (!mousedev->open) {
- if (mousedev->exist)
+ list_del_init(&mousedev->mixdev_node);
+
+ mutex_unlock(&mousedev_mix_mutex);
+}
+
+static void mixdev_open_devices(void)
+{
+ struct mousedev *mousedev;
+
+ mutex_lock(&mousedev_mix_mutex);
+
+ list_for_each_entry(mousedev, &mousedev_mix_list, mixdev_node) {
+ if (!mousedev->mixdev_open)
+ if (!mousedev->open && mousedev->exist) {
+ if (input_open_device(&mousedev->handle))
+ continue;
+ mousedev->open++;
+ }
+ mousedev->mixdev_open++;
+ }
+
+ mutex_unlock(&mousedev_mix_mutex);
+}
+
+static void mixdev_close_devices(void)
+{
+ struct mousedev *mousedev, *next;
+
+ mutex_lock(&mousedev_mix_mutex);
+
+ list_for_each_entry_safe(mousedev, next, &mousedev_mix_list, mixdev_node) {
+ if (mousedev->mixdev_open) {
+ if (!--mousedev->open && mousedev->exist)
input_close_device(&mousedev->handle);
- else
- mousedev_free(mousedev);
+ mousedev->mixdev_open--;
}
}
+
+ mutex_unlock(&mousedev_mix_mutex);
}
-static int mousedev_release(struct inode * inode, struct file * file)
+static int mousedev_release(struct inode *inode, struct file *file)
{
struct mousedev_list *list = file->private_data;
+ struct mousedev *mousedev = list->mousedev;
mousedev_fasync(-1, file, 0);
list_del(&list->node);
+ kfree(list);
- if (!--list->mousedev->open) {
- if (list->mousedev->minor == MOUSEDEV_MIX)
- mixdev_release();
- else if (!mousedev_mix.open) {
- if (list->mousedev->exist)
- input_close_device(&list->mousedev->handle);
- else
- mousedev_free(list->mousedev);
- }
+ if (!--mousedev->open) {
+ if (mousedev->minor == MOUSEDEV_MIX)
+ mixdev_close_devices();
+ else if (mousedev->exist)
+ input_close_device(&mousedev->handle);
}
- kfree(list);
+ kref_put(&mousedev->kref, mousedev_free);
+
return 0;
}
-static int mousedev_open(struct inode * inode, struct file * file)
+static int mousedev_open(struct inode *inode, struct file *file)
{
struct mousedev_list *list;
- struct input_handle *handle;
struct mousedev *mousedev;
int i;
@@ -417,29 +480,31 @@ static int mousedev_open(struct inode *
#endif
i = iminor(inode) - MOUSEDEV_MINOR_BASE;
- if (i >= MOUSEDEV_MINORS || !mousedev_table[i])
+ if (i >= MOUSEDEV_MINORS)
+ return -ENODEV;
+
+ mousedev = mousedev_table[i];
+ if (!mousedev || !mousedev->exist)
return -ENODEV;
- if (!(list = kzalloc(sizeof(struct mousedev_list), GFP_KERNEL)))
+ list = kzalloc(sizeof(struct mousedev_list), GFP_KERNEL);
+ if (!list)
return -ENOMEM;
+ kref_get(&mousedev->kref);
+
spin_lock_init(&list->packet_lock);
list->pos_x = xres / 2;
list->pos_y = yres / 2;
- list->mousedev = mousedev_table[i];
- list_add_tail(&list->node, &mousedev_table[i]->list);
+ list->mousedev = mousedev;
+ list_add_tail(&list->node, &mousedev->list);
file->private_data = list;
- if (!list->mousedev->open++) {
- if (list->mousedev->minor == MOUSEDEV_MIX) {
- list_for_each_entry(handle, &mousedev_handler.h_list, h_node) {
- mousedev = handle->private;
- if (!mousedev->open && mousedev->exist)
- input_open_device(handle);
- }
- } else
- if (!mousedev_mix.open && list->mousedev->exist)
- input_open_device(&list->mousedev->handle);
+ if (!mousedev->open++) {
+ if (mousedev->minor == MOUSEDEV_MIX)
+ mixdev_open_devices();
+ else if (mousedev->exist)
+ input_open_device(&mousedev->handle);
}
return 0;
@@ -629,7 +694,7 @@ static struct input_handle *mousedev_con
{
struct mousedev *mousedev;
struct class_device *cdev;
- int minor = 0;
+ int minor;
for (minor = 0; minor < MOUSEDEV_MINORS && mousedev_table[minor]; minor++);
if (minor == MOUSEDEV_MINORS) {
@@ -637,10 +702,13 @@ static struct input_handle *mousedev_con
return NULL;
}
- if (!(mousedev = kzalloc(sizeof(struct mousedev), GFP_KERNEL)))
+ mousedev = kzalloc(sizeof(struct mousedev), GFP_KERNEL);
+ if (!mousedev)
return NULL;
+ kref_init(&mousedev->kref);
INIT_LIST_HEAD(&mousedev->list);
+ INIT_LIST_HEAD(&mousedev->mixdev_node);
init_waitqueue_head(&mousedev->wait);
mousedev->minor = minor;
@@ -651,8 +719,7 @@ static struct input_handle *mousedev_con
mousedev->handle.private = mousedev;
sprintf(mousedev->name, "mouse%d", minor);
- if (mousedev_mix.open)
- input_open_device(&mousedev->handle);
+ mixdev_add_device(mousedev);
mousedev_table[minor] = mousedev;
@@ -675,18 +742,18 @@ static void mousedev_disconnect(struct i
sysfs_remove_link(&input_class.subsys.kset.kobj, mousedev->name);
class_device_destroy(&input_class,
MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + mousedev->minor));
- mousedev->exist = 0;
+ mixdev_remove_device(mousedev);
+
+ mousedev->exist = 0;
if (mousedev->open) {
input_close_device(handle);
wake_up_interruptible(&mousedev->wait);
list_for_each_entry(list, &mousedev->list, node)
kill_fasync(&list->fasync, SIGIO, POLL_HUP);
- } else {
- if (mousedev_mix.open)
- input_close_device(handle);
- mousedev_free(mousedev);
}
+
+ kref_put(&mousedev->kref, mousedev_free);
}
static const struct input_device_id mousedev_ids[] = {
@@ -714,7 +781,7 @@ static const struct input_device_id mous
.absbit = { BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE) | BIT(ABS_TOOL_WIDTH) },
}, /* A touchpad */
- { }, /* Terminating entry */
+ { }, /* Terminating entry */
};
MODULE_DEVICE_TABLE(input, mousedev_ids);
@@ -745,13 +812,14 @@ static int __init mousedev_init(void)
if (error)
return error;
- memset(&mousedev_mix, 0, sizeof(struct mousedev));
+ kref_init(&mousedev_mix.kref);
INIT_LIST_HEAD(&mousedev_mix.list);
init_waitqueue_head(&mousedev_mix.wait);
- mousedev_table[MOUSEDEV_MIX] = &mousedev_mix;
mousedev_mix.exist = 1;
mousedev_mix.minor = MOUSEDEV_MIX;
+ mousedev_table[MOUSEDEV_MIX] = &mousedev_mix;
+
cdev = class_device_create(&input_class, NULL,
MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX), NULL, "mice");
if (IS_ERR(cdev)) {
Index: work/drivers/input/tsdev.c
===================================================================
--- work.orig/drivers/input/tsdev.c
+++ work/drivers/input/tsdev.c
@@ -110,9 +110,11 @@ struct tsdev {
int open;
int minor;
char name[8];
+ struct input_handle handle;
wait_queue_head_t wait;
+ struct kref kref;
struct list_head list;
- struct input_handle handle;
+
int x, y, pressure;
struct ts_calibration cal;
};
@@ -150,6 +152,7 @@ static int tsdev_open(struct inode *inod
{
int i = iminor(inode) - TSDEV_MINOR_BASE;
struct tsdev_list *list;
+ struct tsdev *tsdev;
printk(KERN_WARNING "tsdev (compaq touchscreen emulation) is scheduled "
"for removal.\nSee Documentation/feature-removal-schedule.txt "
@@ -158,24 +161,31 @@ static int tsdev_open(struct inode *inod
if (i >= TSDEV_MINORS || !tsdev_table[i & TSDEV_MINOR_MASK])
return -ENODEV;
- if (!(list = kzalloc(sizeof(struct tsdev_list), GFP_KERNEL)))
+ tsdev = tsdev_table[i & TSDEV_MINOR_MASK];
+ if (!tsdev || !tsdev->exist)
+ return -ENODEV;
+
+ list = kzalloc(sizeof(struct tsdev_list), GFP_KERNEL);
+ if (!list)
return -ENOMEM;
- list->raw = (i >= TSDEV_MINORS/2) ? 1 : 0;
+ kref_get(&tsdev->kref);
- i &= TSDEV_MINOR_MASK;
- list->tsdev = tsdev_table[i];
- list_add_tail(&list->node, &tsdev_table[i]->list);
+ list->tsdev = tsdev;
+ list->raw = (i >= TSDEV_MINORS / 2);
+ list_add_tail(&list->node, &tsdev->list);
file->private_data = list;
- if (!list->tsdev->open++)
- if (list->tsdev->exist)
- input_open_device(&list->tsdev->handle);
+ if (!tsdev->open++ && tsdev->exist)
+ input_open_device(&list->tsdev->handle);
+
return 0;
}
-static void tsdev_free(struct tsdev *tsdev)
+static void tsdev_free(struct kref *kref)
{
+ struct tsdev *tsdev = container_of(kref, struct tsdev, kref);
+
tsdev_table[tsdev->minor] = NULL;
kfree(tsdev);
}
@@ -183,17 +193,18 @@ static void tsdev_free(struct tsdev *tsd
static int tsdev_release(struct inode *inode, struct file *file)
{
struct tsdev_list *list = file->private_data;
+ struct tsdev *tsdev = list->tsdev;
tsdev_fasync(-1, file, 0);
- list_del(&list->node);
- if (!--list->tsdev->open) {
- if (list->tsdev->exist)
- input_close_device(&list->tsdev->handle);
- else
- tsdev_free(list->tsdev);
- }
+ list_del(&list->node);
kfree(list);
+
+ if (!--tsdev->open && tsdev->exist)
+ input_close_device(&tsdev->handle);
+
+ kref_put(&tsdev->kref, tsdev_free);
+
return 0;
}
@@ -201,22 +212,23 @@ static ssize_t tsdev_read(struct file *f
loff_t * ppos)
{
struct tsdev_list *list = file->private_data;
+ struct tsdev *tsdev = list->tsdev;
int retval = 0;
- if (list->head == list->tail && list->tsdev->exist && (file->f_flags & O_NONBLOCK))
+ if (list->head == list->tail && tsdev->exist && (file->f_flags & O_NONBLOCK))
return -EAGAIN;
- retval = wait_event_interruptible(list->tsdev->wait,
- list->head != list->tail || !list->tsdev->exist);
+ retval = wait_event_interruptible(tsdev->wait,
+ list->head != list->tail || !tsdev->exist);
if (retval)
return retval;
- if (!list->tsdev->exist)
+ if (!tsdev->exist)
return -ENODEV;
while (list->head != list->tail &&
- retval + sizeof (struct ts_event) <= count) {
+ retval + sizeof(struct ts_event) <= count) {
if (copy_to_user (buffer + retval, list->event + list->tail,
sizeof (struct ts_event)))
return -EFAULT;
@@ -385,9 +397,11 @@ static struct input_handle *tsdev_connec
return NULL;
}
- if (!(tsdev = kzalloc(sizeof(struct tsdev), GFP_KERNEL)))
+ tsdev = kzalloc(sizeof(struct tsdev), GFP_KERNEL);
+ if (!tsdev)
return NULL;
+ kref_init(&tsdev->kref);
INIT_LIST_HEAD(&tsdev->list);
init_waitqueue_head(&tsdev->wait);
@@ -441,8 +455,9 @@ static void tsdev_disconnect(struct inpu
wake_up_interruptible(&tsdev->wait);
list_for_each_entry(list, &tsdev->list, node)
kill_fasync(&list->fasync, SIGIO, POLL_HUP);
- } else
- tsdev_free(tsdev);
+ }
+
+ kref_put(&tsdev->kref, tsdev_free);
}
static const struct input_device_id tsdev_ids[] = {
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: PROBLEM: "BUG:" when resuming from suspend-to-ram
2007-03-01 5:36 ` Dmitry Torokhov
@ 2007-03-01 14:55 ` Kristian Grønfeldt Sørensen
2007-03-01 15:01 ` Dmitry Torokhov
2007-03-01 20:04 ` Kristian Grønfeldt Sørensen
1 sibling, 1 reply; 21+ messages in thread
From: Kristian Grønfeldt Sørensen @ 2007-03-01 14:55 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: linux-input, Rafael J. Wysocki, Linux kernel mailing list
On Thu, 2007-03-01 at 00:36 -0500, Dmitry Torokhov wrote:
> On Wednesday 28 February 2007 07:45, Rafael J. Wysocki wrote:
> >
> > > This gives:
> > >
> > > (gdb) l *evdev_disconnect+0xb1
> > > 0xa81 is in evdev_disconnect (include/asm/processor.h:716).
> > > 711 However we don't do prefetches for pre XP Athlons currently
> > > 712 That should be fixed. */
> > > 713 #define ARCH_HAS_PREFETCH
> > > 714 static inline void prefetch(const void *x)
> > > 715 {
> > > 716 alternative_input(ASM_NOP4,
> > > 717 "prefetchnta (%1)",
> > > 718 X86_FEATURE_XMM,
> > > 719 "r" (x));
> > > 720 }
> >
> > Hm, interesting. Looks like a pointer points to nowhere in
> > input_unregister_device(), but I don't know which one. This may be
> > an evdev problem ...
> >
>
> Please try the patch below.
Hmmm. Is the diff against 2.6.20? All hunks except one fails when i try
it. If I pass "-F 3" to patch, then one more hunk succeeds. Am I doing
something wrong?
/Kristian
> --
> Dmitry
>
> Input: use krefs for refcounting in input handlers
>
> This should fix problems whith accessing memory already freed by
> another thread.
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: PROBLEM: "BUG:" when resuming from suspend-to-ram
2007-03-01 14:55 ` Kristian Grønfeldt Sørensen
@ 2007-03-01 15:01 ` Dmitry Torokhov
2007-03-01 16:23 ` Kristian Grønfeldt Sørensen
0 siblings, 1 reply; 21+ messages in thread
From: Dmitry Torokhov @ 2007-03-01 15:01 UTC (permalink / raw)
To: Kristian Grønfeldt Sørensen
Cc: linux-input, Rafael J. Wysocki, Linux kernel mailing list
On 3/1/07, Kristian Grønfeldt Sørensen <kriller@vkr.dk> wrote:
> On Thu, 2007-03-01 at 00:36 -0500, Dmitry Torokhov wrote:
> >
> > Please try the patch below.
>
> Hmmm. Is the diff against 2.6.20? All hunks except one fails when i try
> it. If I pass "-F 3" to patch, then one more hunk succeeds. Am I doing
> something wrong?
>
Hm, technically speaking it is against 2.6.21-rc2 but I think exceppt
for tsdev part it should apply to 2.6.20...
--
Dmitry
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: PROBLEM: "BUG:" when resuming from suspend-to-ram
2007-03-01 15:01 ` Dmitry Torokhov
@ 2007-03-01 16:23 ` Kristian Grønfeldt Sørensen
0 siblings, 0 replies; 21+ messages in thread
From: Kristian Grønfeldt Sørensen @ 2007-03-01 16:23 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: linux-input, Rafael J. Wysocki, Linux kernel mailing list
On Thu, 2007-03-01 at 10:01 -0500, Dmitry Torokhov wrote:
> On 3/1/07, Kristian Grønfeldt Sørensen <kriller@vkr.dk> wrote:
> > On Thu, 2007-03-01 at 00:36 -0500, Dmitry Torokhov wrote:
> > >
> > > Please try the patch below.
> >
> > Hmmm. Is the diff against 2.6.20? All hunks except one fails when i try
> > it. If I pass "-F 3" to patch, then one more hunk succeeds. Am I doing
> > something wrong?
> >
>
> Hm, technically speaking it is against 2.6.21-rc2 but I think exceppt
> for tsdev part it should apply to 2.6.20...
>
OK. Something went wrong when copy pasting the patch to a file. Saved
the entire mail, and applied it succesfully to 2.6.21-r2. Still only a
couple of successfull hunks against 2.6.20. I'm compiling 2.6.21-rc2
right now, and then I'll try to see if the problem persists.
/Kristian
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: PROBLEM: "BUG:" when resuming from suspend-to-ram
2007-03-01 5:36 ` Dmitry Torokhov
2007-03-01 14:55 ` Kristian Grønfeldt Sørensen
@ 2007-03-01 20:04 ` Kristian Grønfeldt Sørensen
2007-03-01 20:25 ` Dmitry Torokhov
1 sibling, 1 reply; 21+ messages in thread
From: Kristian Grønfeldt Sørensen @ 2007-03-01 20:04 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: linux-input, Rafael J. Wysocki, Linux kernel mailing list
On Thu, 2007-03-01 at 00:36 -0500, Dmitry Torokhov wrote:
> On Wednesday 28 February 2007 07:45, Rafael J. Wysocki wrote:
> >
> > > This gives:
> > >
> > > (gdb) l *evdev_disconnect+0xb1
> > > 0xa81 is in evdev_disconnect (include/asm/processor.h:716).
> > > 711 However we don't do prefetches for pre XP Athlons currently
> > > 712 That should be fixed. */
> > > 713 #define ARCH_HAS_PREFETCH
> > > 714 static inline void prefetch(const void *x)
> > > 715 {
> > > 716 alternative_input(ASM_NOP4,
> > > 717 "prefetchnta (%1)",
> > > 718 X86_FEATURE_XMM,
> > > 719 "r" (x));
> > > 720 }
> >
> > Hm, interesting. Looks like a pointer points to nowhere in
> > input_unregister_device(), but I don't know which one. This may be
> > an evdev problem ...
> >
>
> Please try the patch below.
Hmmm.
Now i get this BUG:
BUG: unable to handle kernel paging request at virtual address 6b6b6b6b
printing eip:
f884aa91
*pde = 00000000
Oops: 0000 [#1]
PREEMPT
Modules linked in: tg3 i915 drm binfmt_misc rfcomm l2cap ipv6 fuse
capability commoncap cpufreq_performance aoe af_packet nls_utf8 ntfs
nls_iso8859_1 nls_cp437 vfat fat dm_snapshot dm_mirror dm_mod
ieee80211_crypt_tkip ieee80211_crypt pd6729 snd_seq_dummy snd_seq_oss
snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_seq_device
sermouse hci_vhci hci_uart wbsd mmc_block mmc_core tun msr cpuid
cpufreq_stats container video backlight fan button speedstep_lib thermal
battery ac speedstep_centrino processor sr_mod sbp2 scsi_mod ide_cd
cdrom eth1394 hci_usb snd_intel8x0 pcmcia firmware_class snd_intel8x0m
bluetooth snd_ac97_codec snd_pcm_oss snd_mixer_oss ac97_bus irda snd_pcm
snd_timer i2c_i801 pcspkr crc_ccitt ohci1394 ieee1394 rtc yenta_socket
rsrc_nonstatic pcmcia_core serio_raw i2c_core snd soundcore
snd_page_alloc iTCO_wdt ehci_hcd uhci_hcd usbcore intel_agp agpgart
evdev mousedev
CPU: 0
EIP: 0060:[<f884aa91>] Not tainted VLI
EFLAGS: 00010202 (2.6.21-rc2-x300 #2)
EIP is at evdev_disconnect+0xc1/0xe0 [evdev]
eax: 00000000 ebx: 6b6b675b ecx: 10000000 edx: 00000000
esi: f6db01a8 edi: f6db021c ebp: e0e5dea4 esp: e0e5de94
ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068
Process modprobe (pid: 5968, ti=e0e5c000 task=c1a5cac0 task.ti=e0e5c000)
Stack: 00000000 f884c728 f6db01d8 f713832c e0e5dec4 c02aa9ff 00000000
f7138a58
f7138a58 f6d6d808 c1a1202c c1a12238 e0e5ded4 f8e9e0c5 c1a1202c
f8e9fde0
e0e5dee8 c025f6d4 c1a12238 f8e9feb0 f8e9feb0 e0e5def8 c028d84a
c1a12238
Call Trace:
[<c010520a>] show_trace_log_lvl+0x1a/0x30
[<c01052c9>] show_stack_log_lvl+0xa9/0xd0
[<c010550c>] show_registers+0x21c/0x3a0
[<c0105794>] die+0x104/0x240
[<c0115bb5>] do_page_fault+0x2b5/0x5c0
[<c03384ac>] error_code+0x74/0x7c
[<c02aa9ff>] input_unregister_device+0xaf/0x140
[<f8e9e0c5>] acpi_button_remove+0x2b/0x3f [button]
[<c025f6d4>] acpi_device_remove+0x40/0x62
[<c028d84a>] __device_release_driver+0x6a/0xa0
[<c028df65>] driver_detach+0xf5/0x100
[<c028cc67>] bus_remove_driver+0x97/0xc0
[<c028df9b>] driver_unregister+0xb/0x20
[<c0260aa2>] acpi_bus_unregister_driver+0xd/0xf
[<f8e9e7d9>] acpi_button_exit+0xd/0x6a [button]
[<c013feb2>] sys_delete_module+0x142/0x1b0
[<c0104240>] syscall_call+0x7/0xb
=======================
Code: f8 74 a4 8d b4 26 00 00 00 00 8d 83 08 04 00 00 b9 06 00 02 00 ba
1d 00 00 00 e8 8b 24 93 c7 8b 9b 10 04 00 00 81 eb 10 04 00 00 <8b> 83
10 04 00 00 0f 18 00 9
EIP: [<f884aa91>] evdev_disconnect+0xc1/0xe0 [evdev] SS:ESP
0068:e0e5de94
gdb points me in the same direction as before:
(gdb) l *evdev_disconnect+0xc1
0xa91 is in evdev_disconnect (include/asm/processor.h:716).
711 However we don't do prefetches for pre XP Athlons currently
712 That should be fixed. */
713 #define ARCH_HAS_PREFETCH
714 static inline void prefetch(const void *x)
715 {
716 alternative_input(ASM_NOP4,
717 "prefetchnta (%1)",
718 X86_FEATURE_XMM,
719 "r" (x));
720 }
/Kristian
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: PROBLEM: "BUG:" when resuming from suspend-to-ram
2007-03-01 20:04 ` Kristian Grønfeldt Sørensen
@ 2007-03-01 20:25 ` Dmitry Torokhov
2007-03-01 20:34 ` Kristian Grønfeldt Sørensen
0 siblings, 1 reply; 21+ messages in thread
From: Dmitry Torokhov @ 2007-03-01 20:25 UTC (permalink / raw)
To: Kristian Grønfeldt Sørensen
Cc: linux-input, Rafael J. Wysocki, Linux kernel mailing list
On 3/1/07, Kristian Grønfeldt Sørensen <kriller@vkr.dk> wrote:
>
> Hmmm.
>
> Now i get this BUG:
>
Does it die the same way if you just unload the button driver without
suspending?
--
Dmitry
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: PROBLEM: "BUG:" when resuming from suspend-to-ram
2007-03-01 20:25 ` Dmitry Torokhov
@ 2007-03-01 20:34 ` Kristian Grønfeldt Sørensen
2007-03-05 14:44 ` Dmitry Torokhov
0 siblings, 1 reply; 21+ messages in thread
From: Kristian Grønfeldt Sørensen @ 2007-03-01 20:34 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: linux-input, Rafael J. Wysocki, Linux kernel mailing list
On Thu, 2007-03-01 at 15:25 -0500, Dmitry Torokhov wrote:
> On 3/1/07, Kristian Grønfeldt Sørensen <kriller@vkr.dk> wrote:
> >
> > Hmmm.
> >
> > Now i get this BUG:
> >
>
> Does it die the same way if you just unload the button driver without
> suspending?
>
No. Tried unloading and loading 30 times after each other. No problems
at all.
/Kristian
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: PROBLEM: "BUG:" when resuming from suspend-to-ram
2007-03-01 20:34 ` Kristian Grønfeldt Sørensen
@ 2007-03-05 14:44 ` Dmitry Torokhov
2007-03-05 18:32 ` Rafael J. Wysocki
0 siblings, 1 reply; 21+ messages in thread
From: Dmitry Torokhov @ 2007-03-05 14:44 UTC (permalink / raw)
To: Kristian Grønfeldt Sørensen
Cc: linux-input, Rafael J. Wysocki, Linux kernel mailing list
On 3/1/07, Kristian Grønfeldt Sørensen <kriller@vkr.dk> wrote:
> On Thu, 2007-03-01 at 15:25 -0500, Dmitry Torokhov wrote:
> > On 3/1/07, Kristian Grønfeldt Sørensen <kriller@vkr.dk> wrote:
> > >
> > > Hmmm.
> > >
> > > Now i get this BUG:
> > >
> >
> > Does it die the same way if you just unload the button driver without
> > suspending?
> >
>
> No. Tried unloading and loading 30 times after each other. No problems
> at all.
>
I wonder what causes unloading of the ACPI button driver during resume...
--
Dmitry
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: PROBLEM: "BUG:" when resuming from suspend-to-ram
2007-03-05 14:44 ` Dmitry Torokhov
@ 2007-03-05 18:32 ` Rafael J. Wysocki
2007-03-05 20:51 ` Kristian Grønfeldt Sørensen
0 siblings, 1 reply; 21+ messages in thread
From: Rafael J. Wysocki @ 2007-03-05 18:32 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: Kristian Grønfeldt Sørensen, linux-input,
Linux kernel mailing list
On Monday, 5 March 2007 15:44, Dmitry Torokhov wrote:
> On 3/1/07, Kristian Grønfeldt Sørensen <kriller@vkr.dk> wrote:
> > On Thu, 2007-03-01 at 15:25 -0500, Dmitry Torokhov wrote:
> > > On 3/1/07, Kristian Grønfeldt Sørensen <kriller@vkr.dk> wrote:
> > > >
> > > > Hmmm.
> > > >
> > > > Now i get this BUG:
> > > >
> > >
> > > Does it die the same way if you just unload the button driver without
> > > suspending?
> > >
> >
> > No. Tried unloading and loading 30 times after each other. No problems
> > at all.
> >
>
> I wonder what causes unloading of the ACPI button driver during resume...
Let me guess: pm-utils in OpenSUSE 10.2.
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: PROBLEM: "BUG:" when resuming from suspend-to-ram
2007-03-05 18:32 ` Rafael J. Wysocki
@ 2007-03-05 20:51 ` Kristian Grønfeldt Sørensen
0 siblings, 0 replies; 21+ messages in thread
From: Kristian Grønfeldt Sørensen @ 2007-03-05 20:51 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: Dmitry Torokhov, linux-input, Linux kernel mailing list
On Mon, 2007-03-05 at 19:32 +0100, Rafael J. Wysocki wrote:
> On Monday, 5 March 2007 15:44, Dmitry Torokhov wrote:
> > On 3/1/07, Kristian Grønfeldt Sørensen <kriller@vkr.dk> wrote:
> > > On Thu, 2007-03-01 at 15:25 -0500, Dmitry Torokhov wrote:
> > > > On 3/1/07, Kristian Grønfeldt Sørensen <kriller@vkr.dk> wrote:
> > > > >
> > > > > Hmmm.
> > > > >
> > > > > Now i get this BUG:
> > > > >
> > > >
> > > > Does it die the same way if you just unload the button driver without
> > > > suspending?
> > > >
> > >
> > > No. Tried unloading and loading 30 times after each other. No problems
> > > at all.
> > >
> >
> > I wonder what causes unloading of the ACPI button driver during resume...
>
> Let me guess: pm-utils in OpenSUSE 10.2.
>
Nope. acpi-support for Debian unstable.
/Kristian
^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2007-03-05 20:52 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-02-27 18:45 PROBLEM: "BUG:" when resuming from suspend-to-ram Kristian Grønfeldt Sørensen
2007-02-27 22:04 ` Rafael J. Wysocki
2007-02-27 22:23 ` Kristian Grønfeldt Sørensen
2007-02-27 22:34 ` Rafael J. Wysocki
2007-02-27 23:12 ` Kristian Grønfeldt Sørensen
2007-02-28 0:05 ` Rafael J. Wysocki
2007-02-28 0:33 ` Kristian Grønfeldt Sørensen
2007-02-27 22:30 ` Rafael J. Wysocki
2007-02-27 22:30 ` Rafael J. Wysocki
2007-02-28 0:27 ` Kristian Grønfeldt Sørensen
2007-02-28 12:45 ` Rafael J. Wysocki
2007-03-01 5:36 ` Dmitry Torokhov
2007-03-01 14:55 ` Kristian Grønfeldt Sørensen
2007-03-01 15:01 ` Dmitry Torokhov
2007-03-01 16:23 ` Kristian Grønfeldt Sørensen
2007-03-01 20:04 ` Kristian Grønfeldt Sørensen
2007-03-01 20:25 ` Dmitry Torokhov
2007-03-01 20:34 ` Kristian Grønfeldt Sørensen
2007-03-05 14:44 ` Dmitry Torokhov
2007-03-05 18:32 ` Rafael J. Wysocki
2007-03-05 20:51 ` Kristian Grønfeldt Sørensen
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.