* 2.6.24-rc1 freezes on powerbook at first boot stage
@ 2007-10-24 12:07 Elimar Riesebieter
2007-10-24 12:41 ` Elimar Riesebieter
0 siblings, 1 reply; 15+ messages in thread
From: Elimar Riesebieter @ 2007-10-24 12:07 UTC (permalink / raw)
To: Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 880 bytes --]
Hi all,
I have compiled new 2.6.24-rc1 on my powerbook:
processor : 0
cpu : 7447A, altivec supported
clock : 833.333000MHz
revision : 0.2 (pvr 8003 0102)
bogomips : 36.32
timebase : 18432000
platform : PowerMac
machine : PowerBook5,6
motherboard : PowerBook5,6 MacRISC3 Power Macintosh
detected as : 287 (PowerBook G4 15")
pmac flags : 0000001b
L2 cache : 512K unified
pmac-generation : NewWorld
The kernel is loaded from firmware but freezes at the moment to load
the radeon framebuffer. I can't get any debug info (don't know
how?).
Please find attached config and Cc me, as I am not subscribed.
Thanks
Elimar
--
Obviously the human brain works like a computer.
Since there are no stupid computers humans can't be stupid.
There are just a few running with Windows or even CE ;-)
[-- Attachment #2: config-2.6.24-rc1-aragorn --]
[-- Type: text/plain, Size: 45173 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc1-aragorn
# Wed Oct 24 12:35:39 2007
#
# CONFIG_PPC64 is not set
#
# Processor support
#
CONFIG_6xx=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_MPC5200 is not set
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_LITE5200 is not set
CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
# CONFIG_EMBEDDED6xx is not set
CONFIG_PPC_NATIVE=y
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_PPC_MPC106=y
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPU Frequency drivers
#
CONFIG_CPU_FREQ_PMAC=y
# CONFIG_PPC601_SYNC_FIX is not set
# CONFIG_TAU is not set
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
# Kernel options
#
CONFIG_HIGHMEM=y
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_KEXEC is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_SUSPEND=y
CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/hda3"
CONFIG_APM_EMULATION=m
CONFIG_SECCOMP=y
# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PCCARD_NONSTATIC=m
# CONFIG_HOTPLUG_PCI is not set
#
# Advanced setup
#
CONFIG_ADVANCED_OPTIONS=y
# CONFIG_HIGHMEM_START_BOOL is not set
CONFIG_HIGHMEM_START=0xfe000000
# CONFIG_LOWMEM_SIZE_BOOL is not set
CONFIG_LOWMEM_SIZE=0x30000000
# CONFIG_KERNEL_START_BOOL is not set
CONFIG_KERNEL_START=0xc0000000
# CONFIG_TASK_SIZE_BOOL is not set
CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_BRIDGE_NETFILTER is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
# CONFIG_NF_CT_ACCT is not set
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=y
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_IPRANGE is not set
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_NF_NAT_SNMP_BASIC is not set
# CONFIG_NF_NAT_FTP is not set
# CONFIG_NF_NAT_IRC is not set
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_NF_CONNTRACK_IPV6 is not set
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=m
# CONFIG_BT_HCIBPA10X is not set
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=m
CONFIG_RFKILL_LEDS=y
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_MAC_FLOPPY is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDE_PMAC=y
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_MESH is not set
# CONFIG_SCSI_MAC53C94 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
#
# Controllers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m
#
# Protocols
#
# CONFIG_IEEE1394_VIDEO1394 is not set
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_DV1394=m
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB=y
# CONFIG_ADB_CUDA is not set
CONFIG_ADB_PMU=y
CONFIG_ADB_PMU_LED=y
CONFIG_ADB_PMU_LED_IDE=y
CONFIG_PMAC_APM_EMU=m
# CONFIG_PMAC_MEDIABAY is not set
CONFIG_PMAC_BACKLIGHT=y
CONFIG_PMAC_BACKLIGHT_LEGACY=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
# CONFIG_THERM_WINDTUNNEL is not set
CONFIG_THERM_ADT746X=m
# CONFIG_WINDFARM is not set
# CONFIG_PMAC_RACKMETER is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_MACE is not set
# CONFIG_BMAC is not set
# CONFIG_HAPPYMEAL is not set
CONFIG_SUNGEM=m
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_PCMCIA_XIRTULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
CONFIG_BCM43XX=m
CONFIG_BCM43XX_DEBUG=y
CONFIG_BCM43XX_DMA=y
CONFIG_BCM43XX_PIO=y
CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
# CONFIG_BCM43XX_DMA_MODE is not set
# CONFIG_BCM43XX_PIO_MODE is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET_MII=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=m
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=m
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=960
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=m
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=m
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
# CONFIG_SERIAL_PMACZILOG is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_NVRAM=y
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_POWERMAC=y
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_M41T00 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_AMS=m
CONFIG_SENSORS_AMS_PMU=y
CONFIG_SENSORS_AMS_I2C=y
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_UNINORTH=m
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_OF is not set
# CONFIG_FB_CONTROL is not set
# CONFIG_FB_PLATINUM is not set
# CONFIG_FB_VALKYRIE is not set
# CONFIG_FB_CT65550 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# ALSA PowerMac devices
#
# CONFIG_SND_POWERMAC is not set
#
# ALSA PowerPC devices
#
#
# Apple Onboard Audio driver
#
CONFIG_SND_AOA=m
CONFIG_SND_AOA_FABRIC_LAYOUT=m
# CONFIG_SND_AOA_ONYX is not set
CONFIG_SND_AOA_TAS=m
# CONFIG_SND_AOA_TOONIE is not set
CONFIG_SND_AOA_SOUNDBUS=m
CONFIG_SND_AOA_SOUNDBUS_I2S=m
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# SoC Audio support for SuperH
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT_POWERBOOK=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_DEBUG is not set
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_FILE_STORAGE_TEST=y
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_MMC is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_IDE_DISK=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_SAMPLES is not set
# CONFIG_VIRQ_DEBUG is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.24-rc1 freezes on powerbook at first boot stage
2007-10-24 12:07 2.6.24-rc1 freezes on powerbook at first boot stage Elimar Riesebieter
@ 2007-10-24 12:41 ` Elimar Riesebieter
2007-11-04 3:20 ` Nathan Lynch
0 siblings, 1 reply; 15+ messages in thread
From: Elimar Riesebieter @ 2007-10-24 12:41 UTC (permalink / raw)
To: Linux Kernel Mailing List
On Wed, 24 Oct 2007 the mental interface of
Elimar Riesebieter told:
[...]
> The kernel is loaded from firmware but freezes at the moment to load
> the radeon framebuffer. I can't get any debug info (don't know
> how?).
Screen dump till freeze:
Using PowerMac machine description
Total memory = 1024MB; using 2048kB for hash table (at cfe00000)
Linux version 2.6.24-rc1-aragorn (riesebie@aragorn) (gcc version 4.2.3 20071014 (prelelease) (Debian 4.2.2-3)) #1 Wed Oct 24 12:48:27 CEST 2007
Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
Mapped at 0xfdfc0000
Found a Intrepid mac-io controller, rev: 0, mapped at 0xfdf40000
PowerMac motherboard: PowerBook G4 15"
console [udbg0] enabled
setup_arch: bootmem
Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->1
Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->1
Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->1
via-pmu: Server Mode is disabled
PMU driver v2 initialized for Core99, firmware: 0c
nvram: Checking bank 0...
nvram: gen0=741, gen1=740
nvram: Active bank is: 0
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
arch: exit
Zone PFN ranges:
DMA 0 -> 196608
Normal 196608 -> 196608
HighMem 196608 -> 262144
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 262144
Built 1 zonelists in Zone order. Total pages: 260096
Kernel command line: root=/pci@f4000000/ata-6@d/disk@0:5 root=/dev/hda5
mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
mpic: ISU size: 64, shift: 6, mask: 3f
mpic: Initializing for 64 sources
PID hash table entries: 4096 (order: 12, 16384 bytes)
GMT Delta read from XPRAM: 0 minutes, DST: off
clocksource: timebase mult[d9038e4] shift [22] registered
clockevent: decremeter mult[4b7] shift[16] cpu[0]
Console: colour dummy device 80x25
console handover: boot [udbg0] -> real [tty0]
--
Alles was viel bedacht wird ist bedenklich!;-)
Friedrich Nietzsche
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.24-rc1 freezes on powerbook at first boot stage
2007-10-24 12:41 ` Elimar Riesebieter
@ 2007-11-04 3:20 ` Nathan Lynch
0 siblings, 0 replies; 15+ messages in thread
From: Nathan Lynch @ 2007-11-04 3:20 UTC (permalink / raw)
To: Elimar Riesebieter; +Cc: Linux Kernel Mailing List, linuxppc-dev
(cc'ing linuxppc-dev, see
http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg221770.html
for original post and .config)
Elimar Riesebieter wrote:
> On Wed, 24 Oct 2007 the mental interface of
> Elimar Riesebieter told:
>
> [...]
> > The kernel is loaded from firmware but freezes at the moment to load
> > the radeon framebuffer. I can't get any debug info (don't know
> > how?).
>
> Screen dump till freeze:
>
> Using PowerMac machine description
> Total memory = 1024MB; using 2048kB for hash table (at cfe00000)
> Linux version 2.6.24-rc1-aragorn (riesebie@aragorn) (gcc version 4.2.3 20071014 (prelelease) (Debian 4.2.2-3)) #1 Wed Oct 24 12:48:27 CEST 2007
> Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
> Mapped at 0xfdfc0000
> Found a Intrepid mac-io controller, rev: 0, mapped at 0xfdf40000
> PowerMac motherboard: PowerBook G4 15"
> console [udbg0] enabled
> setup_arch: bootmem
> Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->1
> Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->1
> Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->1
> via-pmu: Server Mode is disabled
> PMU driver v2 initialized for Core99, firmware: 0c
> nvram: Checking bank 0...
> nvram: gen0=741, gen1=740
> nvram: Active bank is: 0
> nvram: OF partition at 0x410
> nvram: XP partition at 0x1020
> nvram: NR partition at 0x1120
> arch: exit
> Zone PFN ranges:
> DMA 0 -> 196608
> Normal 196608 -> 196608
> HighMem 196608 -> 262144
> Movable zone start PFN for each node
> early_node_map[1] active PFN ranges
> 0: 0 -> 262144
> Built 1 zonelists in Zone order. Total pages: 260096
> Kernel command line: root=/pci@f4000000/ata-6@d/disk@0:5 root=/dev/hda5
> mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
> mpic: ISU size: 64, shift: 6, mask: 3f
> mpic: Initializing for 64 sources
> PID hash table entries: 4096 (order: 12, 16384 bytes)
> GMT Delta read from XPRAM: 0 minutes, DST: off
> clocksource: timebase mult[d9038e4] shift [22] registered
> clockevent: decremeter mult[4b7] shift[16] cpu[0]
> Console: colour dummy device 80x25
> console handover: boot [udbg0] -> real [tty0]
Does 2.6.23 (or any earlier kernel) work?
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.24-rc1 freezes on powerbook at first boot stage
@ 2007-11-04 3:20 ` Nathan Lynch
0 siblings, 0 replies; 15+ messages in thread
From: Nathan Lynch @ 2007-11-04 3:20 UTC (permalink / raw)
To: Elimar Riesebieter; +Cc: linuxppc-dev, Linux Kernel Mailing List
(cc'ing linuxppc-dev, see
http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg221770.html
for original post and .config)
Elimar Riesebieter wrote:
> On Wed, 24 Oct 2007 the mental interface of
> Elimar Riesebieter told:
>
> [...]
> > The kernel is loaded from firmware but freezes at the moment to load
> > the radeon framebuffer. I can't get any debug info (don't know
> > how?).
>
> Screen dump till freeze:
>
> Using PowerMac machine description
> Total memory = 1024MB; using 2048kB for hash table (at cfe00000)
> Linux version 2.6.24-rc1-aragorn (riesebie@aragorn) (gcc version 4.2.3 20071014 (prelelease) (Debian 4.2.2-3)) #1 Wed Oct 24 12:48:27 CEST 2007
> Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
> Mapped at 0xfdfc0000
> Found a Intrepid mac-io controller, rev: 0, mapped at 0xfdf40000
> PowerMac motherboard: PowerBook G4 15"
> console [udbg0] enabled
> setup_arch: bootmem
> Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->1
> Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->1
> Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->1
> via-pmu: Server Mode is disabled
> PMU driver v2 initialized for Core99, firmware: 0c
> nvram: Checking bank 0...
> nvram: gen0=741, gen1=740
> nvram: Active bank is: 0
> nvram: OF partition at 0x410
> nvram: XP partition at 0x1020
> nvram: NR partition at 0x1120
> arch: exit
> Zone PFN ranges:
> DMA 0 -> 196608
> Normal 196608 -> 196608
> HighMem 196608 -> 262144
> Movable zone start PFN for each node
> early_node_map[1] active PFN ranges
> 0: 0 -> 262144
> Built 1 zonelists in Zone order. Total pages: 260096
> Kernel command line: root=/pci@f4000000/ata-6@d/disk@0:5 root=/dev/hda5
> mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
> mpic: ISU size: 64, shift: 6, mask: 3f
> mpic: Initializing for 64 sources
> PID hash table entries: 4096 (order: 12, 16384 bytes)
> GMT Delta read from XPRAM: 0 minutes, DST: off
> clocksource: timebase mult[d9038e4] shift [22] registered
> clockevent: decremeter mult[4b7] shift[16] cpu[0]
> Console: colour dummy device 80x25
> console handover: boot [udbg0] -> real [tty0]
Does 2.6.23 (or any earlier kernel) work?
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.24-rc1 freezes on powerbook at first boot stage
2007-11-04 3:20 ` Nathan Lynch
@ 2007-11-04 10:38 ` Elimar Riesebieter
-1 siblings, 0 replies; 15+ messages in thread
From: Elimar Riesebieter @ 2007-11-04 10:38 UTC (permalink / raw)
To: Nathan Lynch; +Cc: Linux Kernel Mailing List, linuxppc-dev
On Sat, 03 Nov 2007 the mental interface of
Nathan Lynch told:
> (cc'ing linuxppc-dev, see
> http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg221770.html
> for original post and .config)
[...]
> > console handover: boot [udbg0] -> real [tty0]
>
> Does 2.6.23 (or any earlier kernel) work?
The powerbook runs Linux since 2.6.12. The config is generated
always by make oldconfig and checking new options for meaningful
use. If I have time, I test rc versions.
Thanks for cooperation :)
Elimar
--
Experience is something you don't get until
just after you need it!
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.24-rc1 freezes on powerbook at first boot stage
@ 2007-11-04 10:38 ` Elimar Riesebieter
0 siblings, 0 replies; 15+ messages in thread
From: Elimar Riesebieter @ 2007-11-04 10:38 UTC (permalink / raw)
To: Nathan Lynch; +Cc: linuxppc-dev, Linux Kernel Mailing List
On Sat, 03 Nov 2007 the mental interface of
Nathan Lynch told:
> (cc'ing linuxppc-dev, see
> http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg221770.html
> for original post and .config)
[...]
> > console handover: boot [udbg0] -> real [tty0]
>=20
> Does 2.6.23 (or any earlier kernel) work?
The powerbook runs Linux since 2.6.12. The config is generated
always by make oldconfig and checking new options for meaningful
use. If I have time, I test rc versions.
Thanks for cooperation :)
Elimar
--=20
Experience is something you don't get until=20
just after you need it!
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.24-rc1 freezes on powerbook at first boot stage
2007-11-04 3:20 ` Nathan Lynch
@ 2007-11-13 22:02 ` Elimar Riesebieter
-1 siblings, 0 replies; 15+ messages in thread
From: Elimar Riesebieter @ 2007-11-13 22:02 UTC (permalink / raw)
To: Nathan Lynch
Cc: Linux Kernel Mailing List, linuxppc-dev, linux-usb-devel, linux-wireless
On Sat, 03 Nov 2007 the mental interface of
Nathan Lynch told:
[...]
> Does 2.6.23 (or any earlier kernel) work?
>
2.6.24-rc2 works so lala :)
Machine:
processor : 0
cpu : 7447A, altivec supported
clock : 833.333000MHz
revision : 0.2 (pvr 8003 0102)
bogomips : 36.32
timebase : 18432000
platform : PowerMac
machine : PowerBook5,6
motherboard : PowerBook5,6 MacRISC3 Power Macintosh
detected as : 287 (PowerBook G4 15")
pmac flags : 0000001b
L2 cache : 512K unified
pmac-generation : NewWorld
b43 doesn't authenticate via wpa (bluetooth isn't loaded):
WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x1 - Internet Systems Consortium DHCP Client V3.1.0
dmesg:
......
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
sysctl table check failed: /kernel .1 Writable sysctl directory
Call Trace:
[c1061e60] [c0008b28] show_stack+0x4c/0x1ac (unreliable)
[c1061ea0] [c0047354] set_fail+0x50/0x68
[c1061ec0] [c0047784] sysctl_check_table+0x418/0x714
[c1061f30] [c00335b8] register_sysctl_table+0x64/0xb4
[c1061f50] [c033fd5c] register_powersave_nap_sysctl+0x18/0x2c
[c1061f60] [c03391e4] kernel_init+0xc0/0x2a0
[c1061ff0] [c0011a58] kernel_thread+0x44/0x60
setup_kcore: restrict size=3fffffff
Registering PowerMac CPU frequency driver
......
ohci_hcd: Unknown symbol usb_hcd_pci_suspend
ohci_hcd: Unknown symbol usb_hcd_resume_root_hub
ohci_hcd: Unknown symbol usb_hcd_pci_probe
ohci_hcd: Unknown symbol usb_hcd_unlink_urb_from_ep
ohci_hcd: Unknown symbol usb_disabled
ohci_hcd: Unknown symbol usb_hcd_check_unlink_urb
ohci_hcd: Unknown symbol usb_calc_bus_time
ohci_hcd: Unknown symbol usb_hcd_pci_shutdown
ohci_hcd: Unknown symbol usb_hcd_link_urb_to_ep
ohci_hcd: Unknown symbol usb_hcd_pci_resume
ohci_hcd: Unknown symbol usb_put_hcd
ohci_hcd: Unknown symbol usb_hcd_giveback_urb
ohci_hcd: Unknown symbol usb_hcd_poll_rh_status
ohci_hcd: Unknown symbol usb_create_hcd
ohci_hcd: Unknown symbol usb_hcd_pci_remove
ohci_hcd: Unknown symbol usb_remove_hcd
ohci_hcd: Unknown symbol usb_add_hcd
ohci_hcd: Unknown symbol usb_root_hub_lost_power
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
.....
console-tools (kbd) doesn't work correct (No DPMS Blank on console)
(Using radeonfb) Boottime font isn't loaded on every vt.
....
There is a lot to do, but it seems to be a big, big code change in
that version. This impressed me by looking at the git changes and
the size of patches. And the rc's don't seem to be frozend versions.
A lot of new code comes in....
Let me know whether a complete dmesg is needed.
Thanks
Elimar
--
The path to source is always uphill!
-unknown-
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.24-rc1 freezes on powerbook at first boot stage
@ 2007-11-13 22:02 ` Elimar Riesebieter
0 siblings, 0 replies; 15+ messages in thread
From: Elimar Riesebieter @ 2007-11-13 22:02 UTC (permalink / raw)
To: Nathan Lynch
Cc: linuxppc-dev, linux-wireless, Linux Kernel Mailing List, linux-usb-devel
On Sat, 03 Nov 2007 the mental interface of
Nathan Lynch told:
[...]
> Does 2.6.23 (or any earlier kernel) work?
>=20
2.6.24-rc2 works so lala :)
Machine:
processor : 0
cpu : 7447A, altivec supported
clock : 833.333000MHz
revision : 0.2 (pvr 8003 0102)
bogomips : 36.32
timebase : 18432000
platform : PowerMac
machine : PowerBook5,6
motherboard : PowerBook5,6 MacRISC3 Power Macintosh=20
detected as : 287 (PowerBook G4 15")
pmac flags : 0000001b
L2 cache : 512K unified
pmac-generation : NewWorld
b43 doesn't authenticate via wpa (bluetooth isn't loaded):
WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x1 - Internet Systems Consortium DHCP Client V3.1.0
dmesg:
=2E.....
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
sysctl table check failed: /kernel .1 Writable sysctl directory
Call Trace:
[c1061e60] [c0008b28] show_stack+0x4c/0x1ac (unreliable)
[c1061ea0] [c0047354] set_fail+0x50/0x68
[c1061ec0] [c0047784] sysctl_check_table+0x418/0x714
[c1061f30] [c00335b8] register_sysctl_table+0x64/0xb4
[c1061f50] [c033fd5c] register_powersave_nap_sysctl+0x18/0x2c
[c1061f60] [c03391e4] kernel_init+0xc0/0x2a0
[c1061ff0] [c0011a58] kernel_thread+0x44/0x60
setup_kcore: restrict size=3D3fffffff
Registering PowerMac CPU frequency driver
=2E.....
ohci_hcd: Unknown symbol usb_hcd_pci_suspend
ohci_hcd: Unknown symbol usb_hcd_resume_root_hub
ohci_hcd: Unknown symbol usb_hcd_pci_probe
ohci_hcd: Unknown symbol usb_hcd_unlink_urb_from_ep
ohci_hcd: Unknown symbol usb_disabled
ohci_hcd: Unknown symbol usb_hcd_check_unlink_urb
ohci_hcd: Unknown symbol usb_calc_bus_time
ohci_hcd: Unknown symbol usb_hcd_pci_shutdown
ohci_hcd: Unknown symbol usb_hcd_link_urb_to_ep
ohci_hcd: Unknown symbol usb_hcd_pci_resume
ohci_hcd: Unknown symbol usb_put_hcd
ohci_hcd: Unknown symbol usb_hcd_giveback_urb
ohci_hcd: Unknown symbol usb_hcd_poll_rh_status
ohci_hcd: Unknown symbol usb_create_hcd
ohci_hcd: Unknown symbol usb_hcd_pci_remove
ohci_hcd: Unknown symbol usb_remove_hcd
ohci_hcd: Unknown symbol usb_add_hcd
ohci_hcd: Unknown symbol usb_root_hub_lost_power
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
=2E....
console-tools (kbd) doesn't work correct (No DPMS Blank on console)
(Using radeonfb) Boottime font isn't loaded on every vt.
=2E...
There is a lot to do, but it seems to be a big, big code change in
that version. This impressed me by looking at the git changes and
the size of patches. And the rc's don't seem to be frozend versions.
A lot of new code comes in....
Let me know whether a complete dmesg is needed.
Thanks
Elimar
--=20
The path to source is always uphill!
-unknown-
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.24-rc1 freezes on powerbook at first boot stage
2007-11-13 22:02 ` Elimar Riesebieter
@ 2007-11-14 15:26 ` Johannes Berg
-1 siblings, 0 replies; 15+ messages in thread
From: Johannes Berg @ 2007-11-14 15:26 UTC (permalink / raw)
To: Elimar Riesebieter
Cc: Nathan Lynch, Linux Kernel Mailing List, linuxppc-dev,
linux-usb-devel, linux-wireless
[-- Attachment #1: Type: text/plain, Size: 1406 bytes --]
[FWIW, my powerbook worked with -rc1]
> 2.6.24-rc2 works so lala :)
> b43 doesn't authenticate via wpa (bluetooth isn't loaded):
> WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 5 value 0x1 - Internet Systems Consortium DHCP Client V3.1.0
Those error messages are unrelated. My b43 works fine, even with a
multi-MAC patch.
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> sysctl table check failed: /kernel .1 Writable sysctl directory
> Call Trace:
> [c1061e60] [c0008b28] show_stack+0x4c/0x1ac (unreliable)
> [c1061ea0] [c0047354] set_fail+0x50/0x68
> [c1061ec0] [c0047784] sysctl_check_table+0x418/0x714
> [c1061f30] [c00335b8] register_sysctl_table+0x64/0xb4
> [c1061f50] [c033fd5c] register_powersave_nap_sysctl+0x18/0x2c
> [c1061f60] [c03391e4] kernel_init+0xc0/0x2a0
> [c1061ff0] [c0011a58] kernel_thread+0x44/0x60
This has been fixed.
> There is a lot to do, but it seems to be a big, big code change in
> that version. This impressed me by looking at the git changes and
> the size of patches. And the rc's don't seem to be frozend versions.
> A lot of new code comes in....
> Let me know whether a complete dmesg is needed.
What is the problem? Why is this on wireless? It'd help if you'd make
one message per problem and post it to the correct mailing lists.
johannes
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.24-rc1 freezes on powerbook at first boot stage
@ 2007-11-14 15:26 ` Johannes Berg
0 siblings, 0 replies; 15+ messages in thread
From: Johannes Berg @ 2007-11-14 15:26 UTC (permalink / raw)
To: Elimar Riesebieter
Cc: linux-wireless, linuxppc-dev, Nathan Lynch,
Linux Kernel Mailing List, linux-usb-devel
[-- Attachment #1: Type: text/plain, Size: 1406 bytes --]
[FWIW, my powerbook worked with -rc1]
> 2.6.24-rc2 works so lala :)
> b43 doesn't authenticate via wpa (bluetooth isn't loaded):
> WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 5 value 0x1 - Internet Systems Consortium DHCP Client V3.1.0
Those error messages are unrelated. My b43 works fine, even with a
multi-MAC patch.
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> sysctl table check failed: /kernel .1 Writable sysctl directory
> Call Trace:
> [c1061e60] [c0008b28] show_stack+0x4c/0x1ac (unreliable)
> [c1061ea0] [c0047354] set_fail+0x50/0x68
> [c1061ec0] [c0047784] sysctl_check_table+0x418/0x714
> [c1061f30] [c00335b8] register_sysctl_table+0x64/0xb4
> [c1061f50] [c033fd5c] register_powersave_nap_sysctl+0x18/0x2c
> [c1061f60] [c03391e4] kernel_init+0xc0/0x2a0
> [c1061ff0] [c0011a58] kernel_thread+0x44/0x60
This has been fixed.
> There is a lot to do, but it seems to be a big, big code change in
> that version. This impressed me by looking at the git changes and
> the size of patches. And the rc's don't seem to be frozend versions.
> A lot of new code comes in....
> Let me know whether a complete dmesg is needed.
What is the problem? Why is this on wireless? It'd help if you'd make
one message per problem and post it to the correct mailing lists.
johannes
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.24-rc1 freezes on powerbook at first boot stage
2007-11-14 15:26 ` Johannes Berg
(?)
@ 2007-11-14 19:33 ` Elimar Riesebieter
2007-11-15 16:48 ` Johannes Berg
-1 siblings, 1 reply; 15+ messages in thread
From: Elimar Riesebieter @ 2007-11-14 19:33 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless
[-- Attachment #1: Type: text/plain, Size: 998 bytes --]
On Wed, 14 Nov 2007 the mental interface of
Johannes Berg told:
>
> [FWIW, my powerbook worked with -rc1]
>
> > 2.6.24-rc2 works so lala :)
>
> > b43 doesn't authenticate via wpa (bluetooth isn't loaded):
> > WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
> > WEXT auth param 5 value 0x1 - Internet Systems Consortium DHCP Client V3.1.0
>
> Those error messages are unrelated. My b43 works fine, even with a
> multi-MAC patch.
I tried it as follows:
wpa_supplicant -Dwext -ieth2 -c/etc/wpa_supplicant/wpa_supplicant.conf
eth2 is renamed by udev via MAC address.
b43-fwcutter intalled
Could you please enlighten me.
[...]
> What is the problem? Why is this on wireless? It'd help if you'd make
> one message per problem and post it to the correct mailing lists.
My apologies. Next time I'll separate the regressions.
Thanks for cooperation
Elimar
--
It's a good thing we don't get all
the government we pay for.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.24-rc1 freezes on powerbook at first boot stage
2007-11-14 19:33 ` Elimar Riesebieter
@ 2007-11-15 16:48 ` Johannes Berg
2007-11-15 18:21 ` Elimar Riesebieter
0 siblings, 1 reply; 15+ messages in thread
From: Johannes Berg @ 2007-11-15 16:48 UTC (permalink / raw)
To: Elimar Riesebieter; +Cc: linux-wireless
[-- Attachment #1: Type: text/plain, Size: 749 bytes --]
> > [FWIW, my powerbook worked with -rc1]
> >
> > > 2.6.24-rc2 works so lala :)
> >
> > > b43 doesn't authenticate via wpa (bluetooth isn't loaded):
> > > WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
> > > WEXT auth param 5 value 0x1 - Internet Systems Consortium DHCP Client V3.1.0
> >
> > Those error messages are unrelated. My b43 works fine, even with a
> > multi-MAC patch.
>
> I tried it as follows:
>
> wpa_supplicant -Dwext -ieth2 -c/etc/wpa_supplicant/wpa_supplicant.conf
>
> eth2 is renamed by udev via MAC address.
>
> b43-fwcutter intalled
>
> Could you please enlighten me.
Well, you haven't said what broke. Those "error" messages above are
perfectlly normal.
johannes
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.24-rc1 freezes on powerbook at first boot stage
2007-11-15 16:48 ` Johannes Berg
@ 2007-11-15 18:21 ` Elimar Riesebieter
2007-11-15 18:26 ` Johannes Berg
0 siblings, 1 reply; 15+ messages in thread
From: Elimar Riesebieter @ 2007-11-15 18:21 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless
[-- Attachment #1: Type: text/plain, Size: 6675 bytes --]
On Thu, 15 Nov 2007 the mental interface of
Johannes Berg told:
>
> > > [FWIW, my powerbook worked with -rc1]
> > >
> > > > 2.6.24-rc2 works so lala :)
> > >
> > > > b43 doesn't authenticate via wpa (bluetooth isn't loaded):
> > > > WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
> > > > WEXT auth param 5 value 0x1 - Internet Systems Consortium DHCP Client V3.1.0
> > >
> > > Those error messages are unrelated. My b43 works fine, even with a
> > > multi-MAC patch.
> >
> > I tried it as follows:
> >
> > wpa_supplicant -Dwext -ieth2 -c/etc/wpa_supplicant/wpa_supplicant.conf
> >
> > eth2 is renamed by udev via MAC address.
> >
> > b43-fwcutter intalled
> >
> > Could you please enlighten me.
>
> Well, you haven't said what broke. Those "error" messages above are
> perfectlly normal.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11g ESSID:""
Mode:Managed Channel:0 Access Point: Not-Associated
Tx-Power=0 dBm
Retry min limit:7 RTS thr:off Fragment thr=2346 B
Link Quality:0 Signal level:0 Noise level:0
wRx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
Nov 15 18:48:04 samweis kernel: b43-phy1 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
Nov 15 18:48:05 samweis kernel: b43-phy1 debug: Chip initialized
Nov 15 18:48:05 samweis kernel: b43-phy1 debug: 30-bit DMA initialized
Nov 15 18:48:05 samweis kernel: input: Unspecified device as /devices/virtual/input/input9
Nov 15 18:48:05 samweis kernel: b43-phy1 debug: Wireless interface started
Nov 15 18:48:05 samweis kernel: b43-phy1 debug: Adding Interface type 2
Nov 15 18:48:05 samweis kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 15 18:48:31 samweis dhclient: Internet Systems Consortium DHCP Client V3.1.0
Nov 15 18:48:33 samweis dhclient: wmaster0: unknown hardware address type 801
# ifconfig wlan0 up
Nov 15 18:51:01 samweis kernel: b43-phy1 debug: Removing Interface type 2
Nov 15 18:51:01 samweis kernel: b43-phy1 debug: Wireless interface stopped
Nov 15 18:51:01 samweis kernel: b43-phy1 debug: DMA-32 0x0200 (RX) max used slots: 1/64
Nov 15 18:51:01 samweis kernel: b43-phy1 debug: DMA-32 0x02A0 (TX) max used slots: 0/128
Nov 15 18:51:01 samweis kernel: b43-phy1 debug: DMA-32 0x0280 (TX) max used slots: 0/128
Nov 15 18:51:01 samweis kernel: b43-phy1 debug: DMA-32 0x0260 (TX) max used slots: 0/128
Nov 15 18:51:01 samweis kernel: b43-phy1 debug: DMA-32 0x0240 (TX) max used slots: 0/128
Nov 15 18:51:01 samweis kernel: b43-phy1 debug: DMA-32 0x0220 (TX) max used slots: 2/128
Nov 15 18:51:01 samweis kernel: b43-phy1 debug: DMA-32 0x0200 (TX) max used slots: 0/128
Nov 15 18:51:29 samweis kernel: b43-phy1 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
Nov 15 18:51:31 samweis kernel: b43-phy1 debug: Chip initialized
Nov 15 18:51:31 samweis kernel: b43-phy1 debug: 30-bit DMA initialized
Nov 15 18:51:31 samweis kernel: Unable to handle kernel paging request for data at address 0x7e13ed24
Nov 15 18:51:31 samweis kernel: Faulting instruction address: 0xc02b3060
Nov 15 18:51:31 samweis kernel: Oops: Kernel access of bad area, sig: 11 [#1]
Nov 15 18:51:31 samweis kernel: PowerMac
Nov 15 18:51:31 samweis kernel: Modules linked in: b43 firmware_class ssb radeon drm hci_usb bluetooth autofs4 ipv6 nfs lockd sunrpc af_packet i2c_dev apm_emu apm_emulation therm_adt746x ams appletouch arc4 usbhid ecb snd_aoa_codec_tas snd_aoa_fabric_layout snd_aoa rc80211_simple snd_aoa_i2sbus snd_pcm_oss snd_mixer_oss firewire_ohci firewire_core crc_itu_t snd_pcm mac80211 cfg80211 snd_timer snd_page_alloc input_polldev ide_cd cdrom snd soundcore snd_aoa_soundbus ehci_hcd ohci_hcd ohci1394 uninorth_agp sungem sungem_phy evdev ieee1394 usbcore agpgart yenta_socket rsrc_nonstatic pcmcia_core unix
Nov 15 18:51:31 samweis kernel: NIP: c02b3060 LR: c02b302c CTR: c02b2ff4
Nov 15 18:51:31 samweis kernel: REGS: c7517ca0 TRAP: 0300 Not tainted (2.6.24-rc2-aragorn)
Nov 15 18:51:31 samweis kernel: MSR: 00009032 <EE,ME,IR,DR> CR: 24084422 XER: 20000000
Nov 15 18:51:31 samweis kernel: DAR: 7e13ed24, DSISR: 40000000
Nov 15 18:51:31 samweis kernel: TASK = c1f81850[3943] 'wpa_supplicant' THREAD: c7516000
Nov 15 18:51:31 samweis kernel: GPR00: bdd880c4 c7517d50 c1f81850 c131f200 f1078164 00000000 00000000 00000010
Nov 15 18:51:31 samweis kernel: GPR08: 00000000 c03b0000 00000000 00000000 24084422 1006dbf8 00000000 00000006
Nov 15 18:51:31 samweis kernel: GPR16: 28244242 100a0000 00000001 100cfb80 c7517e58 ffff8914 c1cd1000 c1c7ad40
Nov 15 18:51:31 samweis kernel: GPR24: c1de5808 c1cf6de0 c1306000 c03b6c60 c0385e24 c0385d70 00000000 c131f200
Nov 15 18:51:31 samweis kernel: NIP [c02b3060] rfkill_register+0x6c/0x12c
Nov 15 18:51:31 samweis kernel: LR [c02b302c] rfkill_register+0x38/0x12c
Nov 15 18:51:31 samweis kernel: Call Trace:
Nov 15 18:51:31 samweis kernel: [c7517d50] [c02b302c] rfkill_register+0x38/0x12c (unreliable)
Nov 15 18:51:31 samweis kernel: [c7517d70] [f26fd594] b43_rfkill_init+0x24/0xb0 [b43]
Nov 15 18:51:31 samweis kernel: [c7517d80] [f26ed324] b43_wireless_core_init+0x614/0x780 [b43]
Nov 15 18:51:31 samweis kernel: [c7517db0] [f26ee254] b43_start+0x94/0xa4 [b43]
Nov 15 18:51:31 samweis kernel: [c7517dd0] [f24b2dac] ieee80211_open+0x1a0/0x3e4 [mac80211]
Nov 15 18:51:31 samweis kernel: [c7517e00] [c024b29c] dev_open+0xb0/0xe8
Nov 15 18:51:31 samweis kernel: [c7517e10] [c024a08c] dev_change_flags+0x90/0x1c0
Nov 15 18:51:31 samweis kernel: [c7517e30] [c02922e0] devinet_ioctl+0x620/0x784
Nov 15 18:51:31 samweis kernel: [c7517ea0] [c02929c8] inet_ioctl+0xcc/0xf8
Nov 15 18:51:31 samweis kernel: [c7517eb0] [c023b22c] sock_ioctl+0x100/0x2b8
Nov 15 18:51:31 samweis kernel: [c7517ed0] [c0097e8c] do_ioctl+0x34/0x98
Nov 15 18:51:31 samweis kernel: [c7517ee0] [c00981c4] vfs_ioctl+0x2d4/0x424
Nov 15 18:51:31 samweis kernel: [c7517f10] [c0098354] sys_ioctl+0x40/0x74
Nov 15 18:51:31 samweis kernel: [c7517f40] [c0011c28] ret_from_syscall+0x0/0x38
Nov 15 18:51:31 samweis kernel: --- Exception: c01 at 0xfcb77fc
Nov 15 18:51:31 samweis kernel: LR = 0xfcb7760
Nov 15 18:51:31 samweis kernel: Instruction dump:
Nov 15 18:51:31 samweis kernel: 4182001c 80010024 7fc3f378 bb61000c 38210020 7c0803a6 4e800020 801f0004
Nov 15 18:51:31 samweis kernel: 3d20c03b 7fe3fb78 3b696c60 5400103a <7c9b002e> 4bfffa25 7c7e1b79 40820074
This is with debugging on.
Elimar
--
You cannot propel yourself forward by
patting yourself on the back.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.24-rc1 freezes on powerbook at first boot stage
2007-11-15 18:21 ` Elimar Riesebieter
@ 2007-11-15 18:26 ` Johannes Berg
2007-11-16 1:29 ` Elimar Riesebieter
0 siblings, 1 reply; 15+ messages in thread
From: Johannes Berg @ 2007-11-15 18:26 UTC (permalink / raw)
To: Elimar Riesebieter; +Cc: linux-wireless
[-- Attachment #1: Type: text/plain, Size: 342 bytes --]
> Nov 15 18:51:31 samweis kernel: NIP [c02b3060] rfkill_register+0x6c/0x12c
> Nov 15 18:51:31 samweis kernel: LR [c02b302c] rfkill_register+0x38/0x12c
> Nov 15 18:51:31 samweis kernel: Call Trace:
> Nov 15 18:51:31 samweis kernel: [c7517d50] [c02b302c] rfkill_register+0x38/0x12c (unreliable)
That was fixed post -rc2.
johannes
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.24-rc1 freezes on powerbook at first boot stage
2007-11-15 18:26 ` Johannes Berg
@ 2007-11-16 1:29 ` Elimar Riesebieter
0 siblings, 0 replies; 15+ messages in thread
From: Elimar Riesebieter @ 2007-11-16 1:29 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless
[-- Attachment #1: Type: text/plain, Size: 569 bytes --]
On Thu, 15 Nov 2007 the mental interface of
Johannes Berg told:
>
>
> > Nov 15 18:51:31 samweis kernel: NIP [c02b3060] rfkill_register+0x6c/0x12c
> > Nov 15 18:51:31 samweis kernel: LR [c02b302c] rfkill_register+0x38/0x12c
> > Nov 15 18:51:31 samweis kernel: Call Trace:
> > Nov 15 18:51:31 samweis kernel: [c7517d50] [c02b302c] rfkill_register+0x38/0x12c (unreliable)
>
> That was fixed post -rc2.
git5 runs well ;)
Thanks, Elimar
--
Never make anything simple and efficient when a way
can be found to make it complex and wonderful ;-)
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2007-11-16 1:29 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-10-24 12:07 2.6.24-rc1 freezes on powerbook at first boot stage Elimar Riesebieter
2007-10-24 12:41 ` Elimar Riesebieter
2007-11-04 3:20 ` Nathan Lynch
2007-11-04 3:20 ` Nathan Lynch
2007-11-04 10:38 ` Elimar Riesebieter
2007-11-04 10:38 ` Elimar Riesebieter
2007-11-13 22:02 ` Elimar Riesebieter
2007-11-13 22:02 ` Elimar Riesebieter
2007-11-14 15:26 ` Johannes Berg
2007-11-14 15:26 ` Johannes Berg
2007-11-14 19:33 ` Elimar Riesebieter
2007-11-15 16:48 ` Johannes Berg
2007-11-15 18:21 ` Elimar Riesebieter
2007-11-15 18:26 ` Johannes Berg
2007-11-16 1:29 ` Elimar Riesebieter
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.