All of lore.kernel.org
 help / color / mirror / Atom feed
From: <sean.wang@mediatek.com>
To: <marcel@holtmann.org>, <johan.hedberg@gmail.com>
Cc: <linux-bluetooth@vger.kernel.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	Sean Wang <sean.wang@mediatek.com>
Subject: [PATCH v5 2/2] Bluetooth: btusb: Add protocol support for MediaTek MT7663U USB devices
Date: Sat, 19 Jan 2019 06:24:31 +0800	[thread overview]
Message-ID: <11f545dcf82eb2e097354f2cb5df8e128b80786d.1547849398.git.sean.wang@mediatek.com> (raw)
In-Reply-To: <cover.1547849398.git.sean.wang@mediatek.com>

From: Sean Wang <sean.wang@mediatek.com>

This adds the support of enabling MT7663U Bluetooth function running
on the top of btusb driver.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=5000 MxCh= 0
D:  Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=0e8d ProdID=7663 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=160mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 drivers/bluetooth/btusb.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index d2ac1912f968..d21bfcf2f95a 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2408,6 +2408,7 @@ static int btusb_shutdown_intel(struct hci_dev *hdev)
 
 #ifdef CONFIG_BT_HCIBTUSB_MTK
 
+#define FIRMWARE_MT7663		"mediatek/mt7663pr2h.bin"
 #define FIRMWARE_MT7668		"mediatek/mt7668pr2h.bin"
 
 #define HCI_WMT_MAX_EVENT_SIZE		64
@@ -2836,6 +2837,9 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
 	}
 
 	switch (dev_id) {
+	case 0x7663:
+		fwname = FIRMWARE_MT7663;
+		break;
 	case 0x7668:
 		fwname = FIRMWARE_MT7668;
 		break;
@@ -2931,6 +2935,7 @@ static int btusb_mtk_shutdown(struct hci_dev *hdev)
 	return 0;
 }
 
+MODULE_FIRMWARE(FIRMWARE_MT7663);
 MODULE_FIRMWARE(FIRMWARE_MT7668);
 #endif
 
-- 
2.18.0


WARNING: multiple messages have this Message-ID (diff)
From: <sean.wang@mediatek.com>
To: marcel@holtmann.org, johan.hedberg@gmail.com
Cc: linux-bluetooth@vger.kernel.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
	Sean Wang <sean.wang@mediatek.com>
Subject: [PATCH v5 2/2] Bluetooth: btusb: Add protocol support for MediaTek MT7663U USB devices
Date: Sat, 19 Jan 2019 06:24:31 +0800	[thread overview]
Message-ID: <11f545dcf82eb2e097354f2cb5df8e128b80786d.1547849398.git.sean.wang@mediatek.com> (raw)
In-Reply-To: <cover.1547849398.git.sean.wang@mediatek.com>

From: Sean Wang <sean.wang@mediatek.com>

This adds the support of enabling MT7663U Bluetooth function running
on the top of btusb driver.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=5000 MxCh= 0
D:  Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=0e8d ProdID=7663 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=160mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 drivers/bluetooth/btusb.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index d2ac1912f968..d21bfcf2f95a 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2408,6 +2408,7 @@ static int btusb_shutdown_intel(struct hci_dev *hdev)
 
 #ifdef CONFIG_BT_HCIBTUSB_MTK
 
+#define FIRMWARE_MT7663		"mediatek/mt7663pr2h.bin"
 #define FIRMWARE_MT7668		"mediatek/mt7668pr2h.bin"
 
 #define HCI_WMT_MAX_EVENT_SIZE		64
@@ -2836,6 +2837,9 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
 	}
 
 	switch (dev_id) {
+	case 0x7663:
+		fwname = FIRMWARE_MT7663;
+		break;
 	case 0x7668:
 		fwname = FIRMWARE_MT7668;
 		break;
@@ -2931,6 +2935,7 @@ static int btusb_mtk_shutdown(struct hci_dev *hdev)
 	return 0;
 }
 
+MODULE_FIRMWARE(FIRMWARE_MT7663);
 MODULE_FIRMWARE(FIRMWARE_MT7668);
 #endif
 
-- 
2.18.0

  parent reply	other threads:[~2019-01-18 22:24 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-18 22:24 [PATCH v5 0/2] Bluetooth: btusb: Add protocol support for MediaTek USB devices sean.wang
2019-01-18 22:24 ` sean.wang
2019-01-18 22:24 ` [PATCH v5 1/2] Bluetooth: btusb: Add protocol support for MediaTek MT7668U " sean.wang
2019-01-18 22:24   ` sean.wang
2019-01-22  7:03   ` kbuild test robot
2019-01-22  7:03     ` kbuild test robot
2019-01-22  7:03   ` [PATCH] Bluetooth: btusb: fix semicolon.cocci warnings kbuild test robot
2019-01-22  7:03     ` kbuild test robot
2019-01-18 22:24 ` sean.wang [this message]
2019-01-18 22:24   ` [PATCH v5 2/2] Bluetooth: btusb: Add protocol support for MediaTek MT7663U USB devices sean.wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=11f545dcf82eb2e097354f2cb5df8e128b80786d.1547849398.git.sean.wang@mediatek.com \
    --to=sean.wang@mediatek.com \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=marcel@holtmann.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.