Re: [patch 2.6.29-rc6+misc] MMC: regulator utilities

[Liam Girdwood <lrg@slimlogic.co.uk>]

On Sun, 2009-03-08 at 22:49 +0100, Pierre Ossman wrote:
> On Sun, 8 Mar 2009 12:34:25 -0800
> David Brownell <david-b@pacbell.net> wrote:
> 
> > On Sunday 08 March 2009, Pierre Ossman wrote:
> > > Looks good. Now what should I do with it? Merge it in the next window
> > > good enough?
> > 
> > Well, after testing the previously-untested call ... here's
> > another update.
> > 
> > Since these depend on new calls in the regulator framework,
> > it can't merge until after they merge (in the next window).
> > Least hassle for you would be if this merges through the
> > regulator framework (with your ack), I suspect.
> > 
> > - Dave
> > 
> > 
> > ======== CUT HERE
> > From: David Brownell <dbrownell@users.sourceforge.net>
> > 
> > Glue between MMC and regulator stacks ... verified with
> > some OMAP3 boards using adjustable and configured-as-fixed
> > regulators on several MMC controllers.
> > 
> > These calls are intended to be used by MMC host adapters
> > using at least one regulator per host.  Examples include
> > slots with regulators supporting multiple voltages and
> > ones using multiple voltage rails (e.g. DAT4..DAT7 using a
> > separate supply, or a split rail chip like certain SDIO
> > WLAN or eMMC solutions).
> > 
> > Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
> > ---
> 
> Acked-by: Pierre Ossman <drzeus@drzeus.cx>
> 

Applied.

Thanks

Liam