[PATCH 0/4] ARM: DaVinci: DM646x Video: DM646x display driver

[PATCH 0/4] ARM: DaVinci: DM646x Video: DM646x display driver

[Chaithrika U S]

Display driver for TI DM646x EVM

Signed-off-by: Chaithrika U S <chaithrika@ti.com>

This patch set has been updated with the review comments for the RFC sent earlier.

These patches add the display driver support for TI DM646x EVM.
This patch set has been tested for basic display functionality for
Composite and Component outputs.

Patch 1: Display device platform and board setup
Patch 2: VPIF driver
Patch 3: DM646x display driver
Patch 4: Makefile and config files modifications for Display

Some of the features like the HBI/VBI support are not yet implemented. 
Also there are some known issues in the code implementation like 
fine tuning to be done to TRY_FMT ioctl.The USERPTR usage has not been 
tested extensively.

These patches are based on the drivers written by:
        Manjunath Hadli <mrh@ti.com>
        Brijesh Jadav <brijesh.j@ti.com>

The files have been renamed as per the discussion. The header files have been 
moved to the same directory as the driver. Currently, the driver supports SDTV
formats only.
 
-Chaithrika

Re: [PATCH 0/4] ARM: DaVinci: DM646x Video: DM646x display driver

[Steve Chen]

On Thu, 2009-03-26 at 09:21 -0400, Chaithrika U S wrote:
> Display driver for TI DM646x EVM
> 
> Signed-off-by: Chaithrika U S <chaithrika@ti.com>
> 
> This patch set has been updated with the review comments for the RFC sent earlier.
> 
> These patches add the display driver support for TI DM646x EVM.
> This patch set has been tested for basic display functionality for
> Composite and Component outputs.
> 
> Patch 1: Display device platform and board setup
> Patch 2: VPIF driver
> Patch 3: DM646x display driver
> Patch 4: Makefile and config files modifications for Display
> 
> Some of the features like the HBI/VBI support are not yet implemented. 
> Also there are some known issues in the code implementation like 
> fine tuning to be done to TRY_FMT ioctl.The USERPTR usage has not been 
> tested extensively.
> 
> These patches are based on the drivers written by:
>         Manjunath Hadli <mrh@ti.com>
>         Brijesh Jadav <brijesh.j@ti.com>

Please add authors and significant contributors of the patch in the
signed-off list

> 
> The files have been renamed as per the discussion. The header files have been 
> moved to the same directory as the driver. Currently, the driver supports SDTV
> formats only.
>  
> -Chaithrika
> 
> 
> _______________________________________________
> Davinci-linux-open-source mailing list
> Davinci-linux-open-source@linux.davincidsp.com
> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

RE: [PATCH 0/4] ARM: DaVinci: DM646x Video: DM646x display driver

[Subrahmanya, Chaithrika]

> On Thu, 2009-03-26 at 09:21 -0400, Chaithrika U S wrote:
> > Display driver for TI DM646x EVM
> >
> > Signed-off-by: Chaithrika U S <chaithrika@ti.com>
> >
> > This patch set has been updated with the review comments for the RFC
> sent earlier.
> >
> > These patches add the display driver support for TI DM646x EVM.
> > This patch set has been tested for basic display functionality for
> > Composite and Component outputs.
> >
> > Patch 1: Display device platform and board setup
> > Patch 2: VPIF driver
> > Patch 3: DM646x display driver
> > Patch 4: Makefile and config files modifications for Display
> >
> > Some of the features like the HBI/VBI support are not yet
> implemented.
> > Also there are some known issues in the code implementation like
> > fine tuning to be done to TRY_FMT ioctl.The USERPTR usage has not
> been
> > tested extensively.
> >
> > These patches are based on the drivers written by:
> >         Manjunath Hadli <mrh@ti.com>
> >         Brijesh Jadav <brijesh.j@ti.com>
> 
> Please add authors and significant contributors of the patch in the
> signed-off list
> 
Steve,

I will include the sign-offs in the next version of the patch.

Regards,
Chaithrika

> >
> > The files have been renamed as per the discussion. The header files
> have been
> > moved to the same directory as the driver. Currently, the driver
> supports SDTV
> > formats only.
> >
> > -Chaithrika
> >
> >
> > _______________________________________________
> > Davinci-linux-open-source mailing list
> > Davinci-linux-open-source@linux.davincidsp.com
> > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-
> source
>