All of lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot] [PATCH] ZOOM2 Mux changes to support zoom2 configuration.
@ 2009-04-01 19:08 Tom Rix
  0 siblings, 0 replies; 2+ messages in thread
From: Tom Rix @ 2009-04-01 19:08 UTC (permalink / raw)
  To: u-boot

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
---
 board/omap3/zoom2/zoom2.h |   20 +++++++++++++++++++-
 1 files changed, 19 insertions(+), 1 deletions(-)

diff --git a/board/omap3/zoom2/zoom2.h b/board/omap3/zoom2/zoom2.h
index 3199fa9..47401f7 100644
--- a/board/omap3/zoom2/zoom2.h
+++ b/board/omap3/zoom2/zoom2.h
@@ -129,6 +129,24 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(GPMC_WAIT0),	(IEN  | PTD | EN  | M0)) /*GPMC_WAIT0*/\
  MUX_VAL(CP(GPMC_WAIT1),	(IEN  | PTU | EN  | M0)) /*GPMC_WAIT1*/\
  MUX_VAL(CP(GPMC_WAIT2),	(IEN  | PTU | EN  | M0)) /*GPMC_WAIT2*/\
- MUX_VAL(CP(GPMC_WAIT3),	(IEN  | PTU | EN  | M0)) /*GPMC_WAIT3*/
+ MUX_VAL(CP(GPMC_WAIT3),	(IEN  | PTU | EN  | M0)) /*GPMC_WAIT3*/\
+ /* IDCC modem Power On */					       \
+ MUX_VAL(CP(CAM_D11),           (IEN  | PTU | EN | M4)) /*GPIO_110*/\
+ MUX_VAL(CP(CAM_D4),            (IEN  | PTU | EN | M4)) /*GPIO_103 */\
+ /* GPMC CS7 has LAN9211 device */\
+ MUX_VAL(CP(GPMC_NCS7),         (IDIS | PTU | EN  | M0)) /*GPMC_nCS7*/\
+ MUX_VAL(CP(MCBSP1_DX),         (IEN  | PTD | DIS | M4)) /*LAN9221*/\
+ MUX_VAL(CP(MCSPI1_CS2),        (IEN  | PTD | EN  | M0)) /*MCSPI1_CS2*/\
+ /* GPMC CS3 has Serial TL16CP754C device */\
+ MUX_VAL(CP(GPMC_NCS3),         (IDIS | PTU | EN  | M0)) /*GPMC_nCS3*/\
+ /* Toggle Reset pin of TL16CP754C device */\
+ MUX_VAL(CP(MCBSP4_CLKX),       (IEN  | PTU | EN  | M4)) /*GPIO_152*/\
+ udelay(10);\
+ MUX_VAL(CP(MCBSP4_CLKX),       (IEN  | PTD | EN  | M4)) /*GPIO_152*/\
+ MUX_VAL(CP(SDRC_CKE1),         (IDIS | PTU | EN  | M0)) /*SDRC_CKE1*/\
+ /* LEDS */\
+ MUX_VAL(CP(MCSPI1_SOMI),       (IEN  | PTD | EN | M4))  /*GPIO_173 red */\
+ MUX_VAL(CP(MCBSP4_DX),         (IEN  | PTD | EN | M4))  /*GPIO_154 blue */\
+ MUX_VAL(CP(GPMC_NBE1),         (IEN  | PTD | EN | M4))  /*GPIO_61 blue2 */
 
 #endif /* _BOARD_ZOOM_H_ */
-- 
1.6.0.5

^ permalink raw reply related	[flat|nested] 2+ messages in thread

* [U-Boot] [PATCH] ZOOM2 Mux changes to support zoom2 configuration.
  2009-04-01 16:11 [U-Boot] [PATCH] ZOOM2 Add initial support for Zoom2 Tom Rix
@ 2009-04-01 16:11 ` Tom Rix
  0 siblings, 0 replies; 2+ messages in thread
From: Tom Rix @ 2009-04-01 16:11 UTC (permalink / raw)
  To: u-boot

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
---
 board/omap3/zoom2/zoom2.h |   20 +++++++++++++++++++-
 1 files changed, 19 insertions(+), 1 deletions(-)

diff --git a/board/omap3/zoom2/zoom2.h b/board/omap3/zoom2/zoom2.h
index 3199fa9..47401f7 100644
--- a/board/omap3/zoom2/zoom2.h
+++ b/board/omap3/zoom2/zoom2.h
@@ -129,6 +129,24 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(GPMC_WAIT0),	(IEN  | PTD | EN  | M0)) /*GPMC_WAIT0*/\
  MUX_VAL(CP(GPMC_WAIT1),	(IEN  | PTU | EN  | M0)) /*GPMC_WAIT1*/\
  MUX_VAL(CP(GPMC_WAIT2),	(IEN  | PTU | EN  | M0)) /*GPMC_WAIT2*/\
- MUX_VAL(CP(GPMC_WAIT3),	(IEN  | PTU | EN  | M0)) /*GPMC_WAIT3*/
+ MUX_VAL(CP(GPMC_WAIT3),	(IEN  | PTU | EN  | M0)) /*GPMC_WAIT3*/\
+ /* IDCC modem Power On */					       \
+ MUX_VAL(CP(CAM_D11),           (IEN  | PTU | EN | M4)) /*GPIO_110*/\
+ MUX_VAL(CP(CAM_D4),            (IEN  | PTU | EN | M4)) /*GPIO_103 */\
+ /* GPMC CS7 has LAN9211 device */\
+ MUX_VAL(CP(GPMC_NCS7),         (IDIS | PTU | EN  | M0)) /*GPMC_nCS7*/\
+ MUX_VAL(CP(MCBSP1_DX),         (IEN  | PTD | DIS | M4)) /*LAN9221*/\
+ MUX_VAL(CP(MCSPI1_CS2),        (IEN  | PTD | EN  | M0)) /*MCSPI1_CS2*/\
+ /* GPMC CS3 has Serial TL16CP754C device */\
+ MUX_VAL(CP(GPMC_NCS3),         (IDIS | PTU | EN  | M0)) /*GPMC_nCS3*/\
+ /* Toggle Reset pin of TL16CP754C device */\
+ MUX_VAL(CP(MCBSP4_CLKX),       (IEN  | PTU | EN  | M4)) /*GPIO_152*/\
+ udelay(10);\
+ MUX_VAL(CP(MCBSP4_CLKX),       (IEN  | PTD | EN  | M4)) /*GPIO_152*/\
+ MUX_VAL(CP(SDRC_CKE1),         (IDIS | PTU | EN  | M0)) /*SDRC_CKE1*/\
+ /* LEDS */\
+ MUX_VAL(CP(MCSPI1_SOMI),       (IEN  | PTD | EN | M4))  /*GPIO_173 red */\
+ MUX_VAL(CP(MCBSP4_DX),         (IEN  | PTD | EN | M4))  /*GPIO_154 blue */\
+ MUX_VAL(CP(GPMC_NBE1),         (IEN  | PTD | EN | M4))  /*GPIO_61 blue2 */
 
 #endif /* _BOARD_ZOOM_H_ */
-- 
1.6.0.5

^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2009-04-01 19:08 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-04-01 19:08 [U-Boot] [PATCH] ZOOM2 Mux changes to support zoom2 configuration Tom Rix
  -- strict thread matches above, loose matches on Subject: below --
2009-04-01 16:11 [U-Boot] [PATCH] ZOOM2 Add initial support for Zoom2 Tom Rix
2009-04-01 16:11 ` [U-Boot] [PATCH] ZOOM2 Mux changes to support zoom2 configuration Tom Rix

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.