* [GIT PATCH] block,scsi,ide: unify sector and data_len
@ 2009-04-29 9:13 ` Tejun Heo
0 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 9:13 UTC (permalink / raw)
To: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petko
Hello,
Upon ack, please pull from the following git tree.
git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.git block-unify-sector-and-data_len
This is the first take of block-unify-sector-and-data_len patchset.
The primary goal of this patchset is to consolidate all the similar
bug slightly different current position and data length fields in
struct request.
Currently, there are two current position fields - rq->sector and
rq->hard_sector. Three possible total lengths - rq->nr_sectors,
rq->hard_nr_sectors and rq->data_len and two possible current lengths
- rq->current_nr_sectors and rq->hard_cur_sectors.
The hard_ prefixed fields are there to allow low level drivers to
modify respective fields without the hard_ prefix for partial
processing. However, this capability can easily be replaced with
partial completion and/or blk_update_request() and in fact with recent
updates there is no remaining user.
data_len equals nr_sectors << 9 for FS requests. For !FS requests,
nr_sectors could be zero while data_len contains the request length.
This is further complicated by the fact that data_len duals as
residual count on request completion.
All these duplications with slight variances lead to a lot of
confusion. For example, it's not very clear what blk_rq_bytes() would
return during request processing. It depends on the type of the
request, whether the driver supports residual byte counting and if so
how it supports that. These subtleties show up both in block layer
and llds requiring request length caching during completion and
different completion paths depending on request type.
This patch simplifies the situation by doing the followings.
* Introduce rq->resid_len and use it for residual count. rq->data_len
means the left data length in the request at all times.
* Make sure nobody tinkers with rq fields directly.
* Kill rq->hard_sector and use rq->sector exclusively.
* Kill rq->nr_sectors and rq->hard_nr_sectors and use rq->data_len
exclusively.
* Kill rq->current_nr_sectors and rq->hard_cur_sectors and use
bio_cur_bytes(rq->bio) instead.
* Encapsulate all accesses via accessors.
* Add __ prefix to rq->sector and rq->data_len to make it clear that
these fields are internal and llds MUST NOT access these directly.
This field renaming is also to trigger build breakage on out-of-tree
drivers which access and modify request fields directly which won't
work correctly anymore.
This patchset contains the following ten patches.
0001-nbd-don-t-clear-rq-sector-and-nr_sectors-unnecessa.patch
0002-ide-tape-don-t-initialize-rq-sector-for-rw-request.patch
0003-block-add-rq-resid_len.patch
0004-block-implement-blk_rq_pos-cur_-sectors-and-conv.patch
0005-block-convert-to-pos-and-nr_sectors-accessors.patch
0006-ide-convert-to-rq-pos-and-nr_sectors-accessors.patch
0007-block-drop-request-hard_-and-nr_sectors.patch
0008-block-cleanup-rq-data_len-usages.patch
0009-ide-cleanup-rq-data_len-usages.patch
0010-block-hide-request-sector-and-data_len.patch
0001-0002 remove unnecessary explicit rq field clearing.
0003 adds rq->resid_len.
0004-0006 introduce and use blk_rq_pos() and blk_rq_[cur_]sectors()
accessors.
0007 drops fields with hard_ prefix.
0008-0009 replaces direct data_len usage with blk_rq_bytes().
0010 hides rq->sector and data_len.
As the patchset contains several block-ide sync points, I think it's
best to apply this series in unified series. SCSI also received good
amount of changes. If there's a tree I can pull from which won't be
rebased, please let me know. If SCSI tree is gonna pull block tree
after merge, that will be fine too.
All changed llds have been compile tested, mid-high layer resid_len
handling has been verified and nothing broke during my test runs with
ide and libata.
This patchset is on top of
linux-2.6-block#for-2.6.31 (f68adec3c7155a8bbf32a90cb4c4d0737df045d9)
+ linux-2.6-ide#for-next (b656eba122929881c52d38ae16637167aaa5b88b)
and contains the following changes.
arch/um/drivers/ubd_kern.c | 2
block/as-iosched.c | 18 +++--
block/blk-barrier.c | 4 -
block/blk-core.c | 100 ++++++++++++-------------------
block/blk-map.c | 2
block/blk-merge.c | 46 ++------------
block/blk.h | 1
block/bsg.c | 8 +-
block/cfq-iosched.c | 30 ++++-----
block/deadline-iosched.c | 2
block/elevator.c | 22 +++---
block/scsi_ioctl.c | 2
drivers/ata/libata-scsi.c | 2
drivers/block/DAC960.c | 6 -
drivers/block/amiflop.c | 6 -
drivers/block/ataflop.c | 10 +--
drivers/block/cciss.c | 35 ++++------
drivers/block/cpqarray.c | 9 +-
drivers/block/floppy.c | 53 ++++++++--------
drivers/block/hd.c | 14 ++--
drivers/block/nbd.c | 19 +----
drivers/block/paride/pcd.c | 4 -
drivers/block/paride/pd.c | 8 +-
drivers/block/paride/pf.c | 8 +-
drivers/block/ps3disk.c | 9 +-
drivers/block/sunvdc.c | 2
drivers/block/swim3.c | 34 +++++-----
drivers/block/sx8.c | 6 -
drivers/block/ub.c | 16 ++--
drivers/block/viodasd.c | 8 +-
drivers/block/virtio_blk.c | 2
drivers/block/xd.c | 4 -
drivers/block/xen-blkfront.c | 11 +--
drivers/block/xsysace.c | 25 ++++---
drivers/block/z2ram.c | 6 -
drivers/cdrom/gdrom.c | 6 -
drivers/cdrom/viocd.c | 2
drivers/ide/ide-atapi.c | 13 ----
drivers/ide/ide-cd.c | 44 ++++---------
drivers/ide/ide-disk.c | 8 +-
drivers/ide/ide-dma.c | 2
drivers/ide/ide-floppy.c | 10 +--
drivers/ide/ide-io.c | 10 +--
drivers/ide/ide-lib.c | 2
drivers/ide/ide-tape.c | 11 +--
drivers/ide/ide-taskfile.c | 2
drivers/ide/pdc202xx_old.c | 2
drivers/ide/tc86c001.c | 2
drivers/ide/tx4939ide.c | 2
drivers/memstick/core/mspro_block.c | 6 -
drivers/message/fusion/mptsas.c | 21 +++---
drivers/message/i2o/i2o_block.c | 24 ++++---
drivers/mmc/card/block.c | 10 +--
drivers/mtd/mtd_blkdevs.c | 7 +-
drivers/s390/block/dasd.c | 2
drivers/s390/block/dasd_diag.c | 5 -
drivers/s390/block/dasd_eckd.c | 6 -
drivers/s390/block/dasd_fba.c | 7 +-
drivers/s390/char/tape_34xx.c | 2
drivers/s390/char/tape_3590.c | 2
drivers/s390/char/tape_block.c | 2
drivers/sbus/char/jsflash.c | 4 -
drivers/scsi/eata.c | 24 +++----
drivers/scsi/libsas/sas_expander.c | 14 +---
drivers/scsi/libsas/sas_host_smp.c | 52 ++++++++--------
drivers/scsi/lpfc/lpfc_scsi.c | 22 +++---
drivers/scsi/mpt2sas/mpt2sas_transport.c | 23 +++----
drivers/scsi/osd/osd_initiator.c | 4 -
drivers/scsi/scsi_lib.c | 45 ++++++-------
drivers/scsi/scsi_tgt_lib.c | 2
drivers/scsi/sd.c | 24 +++----
drivers/scsi/sd_dif.c | 2
drivers/scsi/sg.c | 2
drivers/scsi/sr.c | 15 ++--
drivers/scsi/st.c | 2
drivers/scsi/u14-34f.c | 22 +++---
fs/exofs/osd.c | 4 -
include/linux/bio.h | 6 -
include/linux/blkdev.h | 56 ++++++++++-------
include/linux/elevator.h | 2
include/scsi/scsi_cmnd.h | 2
kernel/trace/blktrace.c | 16 ++--
82 files changed, 511 insertions(+), 576 deletions(-)
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 56+ messages in thread
* [GIT PATCH] block,scsi,ide: unify sector and data_len
@ 2009-04-29 9:13 ` Tejun Heo
0 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 9:13 UTC (permalink / raw)
To: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, grant.likely, paul.clements,
jesper.juhl, tim, jeremy, adrian, oakad, dwmw2, schwidefsky,
ballabio_dario, davem, rusty, Markus.Lidel, bharrosh
Hello,
Upon ack, please pull from the following git tree.
git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.git block-unify-sector-and-data_len
This is the first take of block-unify-sector-and-data_len patchset.
The primary goal of this patchset is to consolidate all the similar
bug slightly different current position and data length fields in
struct request.
Currently, there are two current position fields - rq->sector and
rq->hard_sector. Three possible total lengths - rq->nr_sectors,
rq->hard_nr_sectors and rq->data_len and two possible current lengths
- rq->current_nr_sectors and rq->hard_cur_sectors.
The hard_ prefixed fields are there to allow low level drivers to
modify respective fields without the hard_ prefix for partial
processing. However, this capability can easily be replaced with
partial completion and/or blk_update_request() and in fact with recent
updates there is no remaining user.
data_len equals nr_sectors << 9 for FS requests. For !FS requests,
nr_sectors could be zero while data_len contains the request length.
This is further complicated by the fact that data_len duals as
residual count on request completion.
All these duplications with slight variances lead to a lot of
confusion. For example, it's not very clear what blk_rq_bytes() would
return during request processing. It depends on the type of the
request, whether the driver supports residual byte counting and if so
how it supports that. These subtleties show up both in block layer
and llds requiring request length caching during completion and
different completion paths depending on request type.
This patch simplifies the situation by doing the followings.
* Introduce rq->resid_len and use it for residual count. rq->data_len
means the left data length in the request at all times.
* Make sure nobody tinkers with rq fields directly.
* Kill rq->hard_sector and use rq->sector exclusively.
* Kill rq->nr_sectors and rq->hard_nr_sectors and use rq->data_len
exclusively.
* Kill rq->current_nr_sectors and rq->hard_cur_sectors and use
bio_cur_bytes(rq->bio) instead.
* Encapsulate all accesses via accessors.
* Add __ prefix to rq->sector and rq->data_len to make it clear that
these fields are internal and llds MUST NOT access these directly.
This field renaming is also to trigger build breakage on out-of-tree
drivers which access and modify request fields directly which won't
work correctly anymore.
This patchset contains the following ten patches.
0001-nbd-don-t-clear-rq-sector-and-nr_sectors-unnecessa.patch
0002-ide-tape-don-t-initialize-rq-sector-for-rw-request.patch
0003-block-add-rq-resid_len.patch
0004-block-implement-blk_rq_pos-cur_-sectors-and-conv.patch
0005-block-convert-to-pos-and-nr_sectors-accessors.patch
0006-ide-convert-to-rq-pos-and-nr_sectors-accessors.patch
0007-block-drop-request-hard_-and-nr_sectors.patch
0008-block-cleanup-rq-data_len-usages.patch
0009-ide-cleanup-rq-data_len-usages.patch
0010-block-hide-request-sector-and-data_len.patch
0001-0002 remove unnecessary explicit rq field clearing.
0003 adds rq->resid_len.
0004-0006 introduce and use blk_rq_pos() and blk_rq_[cur_]sectors()
accessors.
0007 drops fields with hard_ prefix.
0008-0009 replaces direct data_len usage with blk_rq_bytes().
0010 hides rq->sector and data_len.
As the patchset contains several block-ide sync points, I think it's
best to apply this series in unified series. SCSI also received good
amount of changes. If there's a tree I can pull from which won't be
rebased, please let me know. If SCSI tree is gonna pull block tree
after merge, that will be fine too.
All changed llds have been compile tested, mid-high layer resid_len
handling has been verified and nothing broke during my test runs with
ide and libata.
This patchset is on top of
linux-2.6-block#for-2.6.31 (f68adec3c7155a8bbf32a90cb4c4d0737df045d9)
+ linux-2.6-ide#for-next (b656eba122929881c52d38ae16637167aaa5b88b)
and contains the following changes.
arch/um/drivers/ubd_kern.c | 2
block/as-iosched.c | 18 +++--
block/blk-barrier.c | 4 -
block/blk-core.c | 100 ++++++++++++-------------------
block/blk-map.c | 2
block/blk-merge.c | 46 ++------------
block/blk.h | 1
block/bsg.c | 8 +-
block/cfq-iosched.c | 30 ++++-----
block/deadline-iosched.c | 2
block/elevator.c | 22 +++---
block/scsi_ioctl.c | 2
drivers/ata/libata-scsi.c | 2
drivers/block/DAC960.c | 6 -
drivers/block/amiflop.c | 6 -
drivers/block/ataflop.c | 10 +--
drivers/block/cciss.c | 35 ++++------
drivers/block/cpqarray.c | 9 +-
drivers/block/floppy.c | 53 ++++++++--------
drivers/block/hd.c | 14 ++--
drivers/block/nbd.c | 19 +----
drivers/block/paride/pcd.c | 4 -
drivers/block/paride/pd.c | 8 +-
drivers/block/paride/pf.c | 8 +-
drivers/block/ps3disk.c | 9 +-
drivers/block/sunvdc.c | 2
drivers/block/swim3.c | 34 +++++-----
drivers/block/sx8.c | 6 -
drivers/block/ub.c | 16 ++--
drivers/block/viodasd.c | 8 +-
drivers/block/virtio_blk.c | 2
drivers/block/xd.c | 4 -
drivers/block/xen-blkfront.c | 11 +--
drivers/block/xsysace.c | 25 ++++---
drivers/block/z2ram.c | 6 -
drivers/cdrom/gdrom.c | 6 -
drivers/cdrom/viocd.c | 2
drivers/ide/ide-atapi.c | 13 ----
drivers/ide/ide-cd.c | 44 ++++---------
drivers/ide/ide-disk.c | 8 +-
drivers/ide/ide-dma.c | 2
drivers/ide/ide-floppy.c | 10 +--
drivers/ide/ide-io.c | 10 +--
drivers/ide/ide-lib.c | 2
drivers/ide/ide-tape.c | 11 +--
drivers/ide/ide-taskfile.c | 2
drivers/ide/pdc202xx_old.c | 2
drivers/ide/tc86c001.c | 2
drivers/ide/tx4939ide.c | 2
drivers/memstick/core/mspro_block.c | 6 -
drivers/message/fusion/mptsas.c | 21 +++---
drivers/message/i2o/i2o_block.c | 24 ++++---
drivers/mmc/card/block.c | 10 +--
drivers/mtd/mtd_blkdevs.c | 7 +-
drivers/s390/block/dasd.c | 2
drivers/s390/block/dasd_diag.c | 5 -
drivers/s390/block/dasd_eckd.c | 6 -
drivers/s390/block/dasd_fba.c | 7 +-
drivers/s390/char/tape_34xx.c | 2
drivers/s390/char/tape_3590.c | 2
drivers/s390/char/tape_block.c | 2
drivers/sbus/char/jsflash.c | 4 -
drivers/scsi/eata.c | 24 +++----
drivers/scsi/libsas/sas_expander.c | 14 +---
drivers/scsi/libsas/sas_host_smp.c | 52 ++++++++--------
drivers/scsi/lpfc/lpfc_scsi.c | 22 +++---
drivers/scsi/mpt2sas/mpt2sas_transport.c | 23 +++----
drivers/scsi/osd/osd_initiator.c | 4 -
drivers/scsi/scsi_lib.c | 45 ++++++-------
drivers/scsi/scsi_tgt_lib.c | 2
drivers/scsi/sd.c | 24 +++----
drivers/scsi/sd_dif.c | 2
drivers/scsi/sg.c | 2
drivers/scsi/sr.c | 15 ++--
drivers/scsi/st.c | 2
drivers/scsi/u14-34f.c | 22 +++---
fs/exofs/osd.c | 4 -
include/linux/bio.h | 6 -
include/linux/blkdev.h | 56 ++++++++++-------
include/linux/elevator.h | 2
include/scsi/scsi_cmnd.h | 2
kernel/trace/blktrace.c | 16 ++--
82 files changed, 511 insertions(+), 576 deletions(-)
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 56+ messages in thread
* [PATCH 01/10] nbd: don't clear rq->sector and nr_sectors unnecessarily
2009-04-29 9:13 ` Tejun Heo
@ 2009-04-29 9:13 ` Tejun Heo
-1 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 9:13 UTC (permalink / raw)
To: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petko
Cc: Tejun Heo
There's no reason to clear rq->sector and nr_sectors after calling
blk_rq_init(). They're guaranteed to be clear. Drop unnecessary
clearing.
[ Impact: cleanup ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Paul Clements <paul.clements@steeleye.com>
---
drivers/block/nbd.c | 7 -------
1 files changed, 0 insertions(+), 7 deletions(-)
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 4d6de4f..a9ab8be 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -580,13 +580,6 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *lo,
blk_rq_init(NULL, &sreq);
sreq.cmd_type = REQ_TYPE_SPECIAL;
nbd_cmd(&sreq) = NBD_CMD_DISC;
- /*
- * Set these to sane values in case server implementation
- * fails to check the request type first and also to keep
- * debugging output cleaner.
- */
- sreq.sector = 0;
- sreq.nr_sectors = 0;
if (!lo->sock)
return -EINVAL;
nbd_send_req(lo, &sreq);
--
1.6.0.2
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH 01/10] nbd: don't clear rq->sector and nr_sectors unnecessarily
@ 2009-04-29 9:13 ` Tejun Heo
0 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 9:13 UTC (permalink / raw)
To: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, grant.likely, paul.clements,
jesper.juhl, tim, jeremy, adrian, oakad, dwmw2, schwidefsky,
ballabio_dario, davem, rusty, Markus.Lidel, bharrosh
Cc: Tejun Heo
There's no reason to clear rq->sector and nr_sectors after calling
blk_rq_init(). They're guaranteed to be clear. Drop unnecessary
clearing.
[ Impact: cleanup ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Paul Clements <paul.clements@steeleye.com>
---
drivers/block/nbd.c | 7 -------
1 files changed, 0 insertions(+), 7 deletions(-)
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 4d6de4f..a9ab8be 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -580,13 +580,6 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *lo,
blk_rq_init(NULL, &sreq);
sreq.cmd_type = REQ_TYPE_SPECIAL;
nbd_cmd(&sreq) = NBD_CMD_DISC;
- /*
- * Set these to sane values in case server implementation
- * fails to check the request type first and also to keep
- * debugging output cleaner.
- */
- sreq.sector = 0;
- sreq.nr_sectors = 0;
if (!lo->sock)
return -EINVAL;
nbd_send_req(lo, &sreq);
--
1.6.0.2
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH 02/10] ide-tape: don't initialize rq->sector for rw requests
2009-04-29 9:13 ` Tejun Heo
@ 2009-04-29 9:13 ` Tejun Heo
-1 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 9:13 UTC (permalink / raw)
To: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petko
Cc: Tejun Heo
rq->sector is set to the tape->first_frame but it's never actually
used and not even in the correct unit (512 byte sectors). Don't set
it.
[ Impact: cleanup ]
Signed-off-by: Tejun Heo <tj@kernel.org>
---
drivers/ide/ide-tape.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 8dfc688..7149224 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -892,7 +892,6 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size)
rq->cmd_type = REQ_TYPE_SPECIAL;
rq->cmd[13] = cmd;
rq->rq_disk = tape->disk;
- rq->sector = tape->first_frame;
if (size) {
ret = blk_rq_map_kern(drive->queue, rq, tape->buf, size,
--
1.6.0.2
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH 02/10] ide-tape: don't initialize rq->sector for rw requests
@ 2009-04-29 9:13 ` Tejun Heo
0 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 9:13 UTC (permalink / raw)
To: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, grant.likely, paul.clements,
jesper.juhl, tim, jeremy, adrian, oakad, dwmw2, schwidefsky,
ballabio_dario, davem, rusty, Markus.Lidel, bharrosh
Cc: Tejun Heo
rq->sector is set to the tape->first_frame but it's never actually
used and not even in the correct unit (512 byte sectors). Don't set
it.
[ Impact: cleanup ]
Signed-off-by: Tejun Heo <tj@kernel.org>
---
drivers/ide/ide-tape.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 8dfc688..7149224 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -892,7 +892,6 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size)
rq->cmd_type = REQ_TYPE_SPECIAL;
rq->cmd[13] = cmd;
rq->rq_disk = tape->disk;
- rq->sector = tape->first_frame;
if (size) {
ret = blk_rq_map_kern(drive->queue, rq, tape->buf, size,
--
1.6.0.2
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH 03/10] block: add rq->resid_len
2009-04-29 9:13 ` Tejun Heo
@ 2009-04-29 9:13 ` Tejun Heo
-1 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 9:13 UTC (permalink / raw)
To: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petko
Cc: Tejun Heo, Doug Gilbert, Darrick J. Wong
rq->data_len served two purposes - the length of data buffer on issue
and the residual count on completion. This duality creates some
headaches.
First of all, block layer and low level drivers can't really determine
what rq->data_len contains while a request is executing. It could be
the total request length or it coulde be anything else one of the
lower layers is using to keep track of residual count. This
complicates things because blk_rq_bytes() and thus
[__]blk_end_request_all() relies on rq->data_len for PC commands.
Drivers which want to report residual count should first cache the
total request length, update rq->data_len and then complete the
request with the cached data length.
Secondly, it makes requests default to reporting full residual count,
ie. reporting that no data transfer occurred. The residual count is
an exception not the norm; however, the driver should clear
rq->data_len to zero to signify the normal cases while leaving it
alone means no data transfer occurred at all. This reverse default
behavior complicates code unnecessarily and renders block PC on some
drivers (ide-tape/floppy) unuseable.
This patch adds rq->resid_len which is used only for residual count.
While at it, remove now unnecessasry blk_rq_bytes() caching in
ide_pc_intr() as rq->data_len is not changed anymore.
[ Impact: cleanup residual count handling, report 0 resid by default ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
---
block/bsg.c | 8 +++---
block/scsi_ioctl.c | 2 +-
drivers/block/cciss.c | 13 +++-------
drivers/block/ub.c | 6 +---
drivers/ide/ide-atapi.c | 9 +------
drivers/ide/ide-cd.c | 13 ++++------
drivers/ide/ide-tape.c | 4 +-
drivers/message/fusion/mptsas.c | 3 +-
drivers/scsi/libsas/sas_expander.c | 6 +----
drivers/scsi/libsas/sas_host_smp.c | 38 +++++++++++++++--------------
drivers/scsi/mpt2sas/mpt2sas_transport.c | 4 +--
drivers/scsi/scsi_lib.c | 24 +++++++++---------
drivers/scsi/sg.c | 2 +-
drivers/scsi/st.c | 2 +-
include/linux/blkdev.h | 1 +
15 files changed, 57 insertions(+), 78 deletions(-)
diff --git a/block/bsg.c b/block/bsg.c
index 206060e..2d746e3 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -445,14 +445,14 @@ static int blk_complete_sgv4_hdr_rq(struct request *rq, struct sg_io_v4 *hdr,
}
if (rq->next_rq) {
- hdr->dout_resid = rq->data_len;
- hdr->din_resid = rq->next_rq->data_len;
+ hdr->dout_resid = rq->resid_len;
+ hdr->din_resid = rq->next_rq->resid_len;
blk_rq_unmap_user(bidi_bio);
blk_put_request(rq->next_rq);
} else if (rq_data_dir(rq) == READ)
- hdr->din_resid = rq->data_len;
+ hdr->din_resid = rq->resid_len;
else
- hdr->dout_resid = rq->data_len;
+ hdr->dout_resid = rq->resid_len;
/*
* If the request generated a negative error number, return it
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 58cf456..a9670dd 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -230,7 +230,7 @@ static int blk_complete_sghdr_rq(struct request *rq, struct sg_io_hdr *hdr,
hdr->info = 0;
if (hdr->masked_status || hdr->host_status || hdr->driver_status)
hdr->info |= SG_INFO_CHECK;
- hdr->resid = rq->data_len;
+ hdr->resid = rq->resid_len;
hdr->sb_len_wr = 0;
if (rq->sense_len && hdr->sbp) {
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 4d4d5e0..f22d493 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -1299,7 +1299,6 @@ static void cciss_softirq_done(struct request *rq)
{
CommandList_struct *cmd = rq->completion_data;
ctlr_info_t *h = hba[cmd->ctlr];
- unsigned int nr_bytes;
unsigned long flags;
u64bit temp64;
int i, ddir;
@@ -1321,15 +1320,11 @@ static void cciss_softirq_done(struct request *rq)
printk("Done with %p\n", rq);
#endif /* CCISS_DEBUG */
- /*
- * Store the full size and set the residual count for pc requests
- */
- nr_bytes = blk_rq_bytes(rq);
+ /* set the residual count for pc requests */
if (blk_pc_request(rq))
- rq->data_len = cmd->err_info->ResidualCnt;
+ rq->resid_len = cmd->err_info->ResidualCnt;
- if (blk_end_request(rq, (rq->errors == 0) ? 0 : -EIO, nr_bytes))
- BUG();
+ blk_end_request_all(rq, (rq->errors == 0) ? 0 : -EIO);
spin_lock_irqsave(&h->lock, flags);
cmd_free(h, cmd, 1);
@@ -2691,7 +2686,7 @@ static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
printk(KERN_WARNING "cciss: cmd %p has"
" completed with data underrun "
"reported\n", cmd);
- cmd->rq->data_len = cmd->err_info->ResidualCnt;
+ cmd->rq->resid_len = cmd->err_info->ResidualCnt;
}
break;
case CMD_DATA_OVERRUN:
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index 689cd27..8c2cc71 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -783,10 +783,8 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
if (cmd->error == 0) {
if (blk_pc_request(rq)) {
- if (cmd->act_len >= rq->data_len)
- rq->data_len = 0;
- else
- rq->data_len -= cmd->act_len;
+ if (cmd->act_len < rq->data_len)
+ rq->resid_len = rq->data_len - cmd->act_len;
scsi_status = 0;
} else {
if (cmd->act_len != cmd->len) {
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index afe5a43..e4a02a0 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -367,7 +367,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
/* No more interrupts */
if ((stat & ATA_DRQ) == 0) {
int uptodate, error;
- unsigned int done;
debug_log("Packet command completed, %d bytes transferred\n",
pc->xferred);
@@ -406,12 +405,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0)
dsc = 1;
- /*
- * ->pc_callback() might change rq->data_len for
- * residual count, cache total length.
- */
- done = blk_rq_bytes(rq);
-
/* Command finished - Call the callback function */
uptodate = drive->pc_callback(drive, dsc);
@@ -431,7 +424,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
error = uptodate ? 0 : -EIO;
}
- ide_complete_rq(drive, error, done);
+ ide_complete_rq(drive, error, blk_rq_bytes(rq));
return ide_stopped;
}
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 6736287..8bbe222 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -519,7 +519,7 @@ int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd,
error = blk_execute_rq(drive->queue, info->disk, rq, 0);
if (buffer)
- *bufflen = rq->data_len;
+ *bufflen = rq->resid_len;
flags = rq->cmd_flags;
blk_put_request(rq);
@@ -707,11 +707,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
out_end:
if (blk_pc_request(rq) && rc == 0) {
- unsigned int dlen = rq->data_len;
-
- rq->data_len = 0;
-
- if (blk_end_request(rq, 0, dlen))
+ if (blk_end_request(rq, 0, rq->data_len))
BUG();
hwif->rq = NULL;
@@ -740,9 +736,10 @@ out_end:
nsectors = 1;
if (blk_fs_request(rq) == 0) {
- rq->data_len -= (cmd->nbytes - cmd->nleft);
+ rq->resid_len = rq->data_len -
+ (cmd->nbytes - cmd->nleft);
if (uptodate == 0 && (cmd->tf_flags & IDE_TFLAG_WRITE))
- rq->data_len += cmd->last_xfer_len;
+ rq->resid_len += cmd->last_xfer_len;
}
ide_complete_rq(drive, uptodate ? 0 : -EIO, nsectors << 9);
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 7149224..3813a0e 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -380,7 +380,7 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)
}
tape->first_frame += blocks;
- rq->data_len -= blocks * tape->blk_size;
+ rq->resid_len = blk_rq_bytes(rq) - blocks * tape->blk_size;
if (pc->error) {
uptodate = 0;
@@ -903,7 +903,7 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size)
blk_execute_rq(drive->queue, tape->disk, rq, 0);
/* calculate the number of transferred bytes and update buffer state */
- size -= rq->data_len;
+ size -= rq->resid_len;
tape->cur = tape->buf;
if (cmd == REQ_IDETAPE_READ)
tape->valid = size;
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index a9019f0..5d5f347 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -1357,8 +1357,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
smprep = (SmpPassthroughReply_t *)ioc->sas_mgmt.reply;
memcpy(req->sense, smprep, sizeof(*smprep));
req->sense_len = sizeof(*smprep);
- req->data_len = 0;
- rsp->data_len -= smprep->ResponseDataLength;
+ rsp->resid_len = rsp->data_len - smprep->ResponseDataLength;
} else {
printk(MYIOC_s_ERR_FMT "%s: smp passthru reply failed to be returned\n",
ioc->name, __func__);
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 3da02e4..6605ec9 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -1936,12 +1936,8 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
bio_data(rsp->bio), rsp->data_len);
if (ret > 0) {
/* positive number is the untransferred residual */
- rsp->data_len = ret;
- req->data_len = 0;
+ rsp->resid_len = ret;
ret = 0;
- } else if (ret == 0) {
- rsp->data_len = 0;
- req->data_len = 0;
}
return ret;
diff --git a/drivers/scsi/libsas/sas_host_smp.c b/drivers/scsi/libsas/sas_host_smp.c
index d110a36..89952ed 100644
--- a/drivers/scsi/libsas/sas_host_smp.c
+++ b/drivers/scsi/libsas/sas_host_smp.c
@@ -134,7 +134,7 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
{
u8 *req_data = NULL, *resp_data = NULL, *buf;
struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
- int error = -EINVAL, resp_data_len = rsp->data_len;
+ int error = -EINVAL;
/* eight is the minimum size for request and response frames */
if (req->data_len < 8 || rsp->data_len < 8)
@@ -176,17 +176,20 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
resp_data[1] = req_data[1];
resp_data[2] = SMP_RESP_FUNC_UNK;
+ req->resid_len = req->data_len;
+ rsp->resid_len = rsp->data_len;
+
switch (req_data[1]) {
case SMP_REPORT_GENERAL:
- req->data_len -= 8;
- resp_data_len -= 32;
+ req->resid_len -= 8;
+ rsp->resid_len -= 32;
resp_data[2] = SMP_RESP_FUNC_ACC;
resp_data[9] = sas_ha->num_phys;
break;
case SMP_REPORT_MANUF_INFO:
- req->data_len -= 8;
- resp_data_len -= 64;
+ req->resid_len -= 8;
+ rsp->resid_len -= 64;
resp_data[2] = SMP_RESP_FUNC_ACC;
memcpy(resp_data + 12, shost->hostt->name,
SAS_EXPANDER_VENDOR_ID_LEN);
@@ -199,13 +202,13 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
break;
case SMP_DISCOVER:
- req->data_len -= 16;
- if ((int)req->data_len < 0) {
- req->data_len = 0;
+ req->resid_len -= 16;
+ if ((int)req->resid_len < 0) {
+ req->resid_len = 0;
error = -EINVAL;
goto out;
}
- resp_data_len -= 56;
+ rsp->resid_len -= 56;
sas_host_smp_discover(sas_ha, resp_data, req_data[9]);
break;
@@ -215,13 +218,13 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
break;
case SMP_REPORT_PHY_SATA:
- req->data_len -= 16;
- if ((int)req->data_len < 0) {
- req->data_len = 0;
+ req->resid_len -= 16;
+ if ((int)req->resid_len < 0) {
+ req->resid_len = 0;
error = -EINVAL;
goto out;
}
- resp_data_len -= 60;
+ rsp->resid_len -= 60;
sas_report_phy_sata(sas_ha, resp_data, req_data[9]);
break;
@@ -238,13 +241,13 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
break;
case SMP_PHY_CONTROL:
- req->data_len -= 44;
- if ((int)req->data_len < 0) {
- req->data_len = 0;
+ req->resid_len -= 44;
+ if ((int)req->resid_len < 0) {
+ req->resid_len = 0;
error = -EINVAL;
goto out;
}
- resp_data_len -= 8;
+ rsp->resid_len -= 8;
sas_phy_control(sas_ha, req_data[9], req_data[10],
req_data[32] >> 4, req_data[33] >> 4,
resp_data);
@@ -265,7 +268,6 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
flush_kernel_dcache_page(bio_page(rsp->bio));
kunmap_atomic(buf - bio_offset(rsp->bio), KM_USER0);
local_irq_enable();
- rsp->data_len = resp_data_len;
out:
kfree(req_data);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c
index e03dc0b..53759c5 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_transport.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c
@@ -1170,9 +1170,7 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
memcpy(req->sense, mpi_reply, sizeof(*mpi_reply));
req->sense_len = sizeof(*mpi_reply);
- req->data_len = 0;
- rsp->data_len -= mpi_reply->ResponseDataLength;
-
+ rsp->resid_len = rsp->data_len - mpi_reply->ResponseDataLength;
} else {
dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT
"%s - no reply\n", ioc->name, __func__));
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index aa9fc57..7d49ef5 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -240,11 +240,11 @@ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
* is invalid. Prevent the garbage from being misinterpreted
* and prevent security leaks by zeroing out the excess data.
*/
- if (unlikely(req->data_len > 0 && req->data_len <= bufflen))
- memset(buffer + (bufflen - req->data_len), 0, req->data_len);
+ if (unlikely(req->resid_len > 0 && req->resid_len <= bufflen))
+ memset(buffer + (bufflen - req->resid_len), 0, req->resid_len);
if (resid)
- *resid = req->data_len;
+ *resid = req->resid_len;
ret = req->errors;
out:
blk_put_request(req);
@@ -549,7 +549,7 @@ static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int error,
int leftover = (req->hard_nr_sectors << 9);
if (blk_pc_request(req))
- leftover = req->data_len;
+ leftover = req->resid_len;
/* kill remainder if no retrys */
if (error && scsi_noretry_cmd(cmd))
@@ -673,11 +673,11 @@ void scsi_release_buffers(struct scsi_cmnd *cmd)
EXPORT_SYMBOL(scsi_release_buffers);
/*
- * Bidi commands Must be complete as a whole, both sides at once.
- * If part of the bytes were written and lld returned
- * scsi_in()->resid and/or scsi_out()->resid this information will be left
- * in req->data_len and req->next_rq->data_len. The upper-layer driver can
- * decide what to do with this information.
+ * Bidi commands Must be complete as a whole, both sides at once. If
+ * part of the bytes were written and lld returned scsi_in()->resid
+ * and/or scsi_out()->resid this information will be left in
+ * req->resid_len and req->next_rq->resid_len. The upper-layer driver
+ * can decide what to do with this information.
*/
static void scsi_end_bidi_request(struct scsi_cmnd *cmd)
{
@@ -685,8 +685,8 @@ static void scsi_end_bidi_request(struct scsi_cmnd *cmd)
unsigned int dlen = req->data_len;
unsigned int next_dlen = req->next_rq->data_len;
- req->data_len = scsi_out(cmd)->resid;
- req->next_rq->data_len = scsi_in(cmd)->resid;
+ req->resid_len = scsi_out(cmd)->resid;
+ req->next_rq->resid_len = scsi_in(cmd)->resid;
/* The req and req->next_rq have not been completed */
BUG_ON(blk_end_bidi_request(req, 0, dlen, next_dlen));
@@ -778,7 +778,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
scsi_end_bidi_request(cmd);
return;
}
- req->data_len = scsi_get_resid(cmd);
+ req->resid_len = scsi_get_resid(cmd);
}
BUG_ON(blk_bidi_rq(req)); /* bidi not support for !blk_pc_request yet */
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 82312df..dec4c70 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -1260,7 +1260,7 @@ static void sg_rq_end_io(struct request *rq, int uptodate)
sense = rq->sense;
result = rq->errors;
- resid = rq->data_len;
+ resid = rq->resid_len;
SCSI_LOG_TIMEOUT(4, printk("sg_cmd_done: %s, pack_id=%d, res=0x%x\n",
sdp->disk->disk_name, srp->header.pack_id, result));
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index eb24efe..8681b70 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -463,7 +463,7 @@ static void st_scsi_execute_end(struct request *req, int uptodate)
struct scsi_tape *STp = SRpnt->stp;
STp->buffer->cmdstat.midlevel_result = SRpnt->result = req->errors;
- STp->buffer->cmdstat.residual = req->data_len;
+ STp->buffer->cmdstat.residual = req->resid_len;
if (SRpnt->waiting)
complete(SRpnt->waiting);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 3a5b1bd..6a967ca 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -229,6 +229,7 @@ struct request {
unsigned int data_len;
unsigned int extra_len; /* length of alignment and padding */
unsigned int sense_len;
+ unsigned int resid_len; /* residual count */
void *sense;
unsigned long deadline;
--
1.6.0.2
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH 03/10] block: add rq->resid_len
@ 2009-04-29 9:13 ` Tejun Heo
0 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 9:13 UTC (permalink / raw)
To: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, grant.likely, paul.clements,
jesper.juhl, tim, jeremy, adrian, oakad, dwmw2, schwidefsky,
ballabio_dario, davem, rusty, Markus.Lidel, bharrosh
Cc: Tejun Heo, Doug Gilbert, Darrick J. Wong
rq->data_len served two purposes - the length of data buffer on issue
and the residual count on completion. This duality creates some
headaches.
First of all, block layer and low level drivers can't really determine
what rq->data_len contains while a request is executing. It could be
the total request length or it coulde be anything else one of the
lower layers is using to keep track of residual count. This
complicates things because blk_rq_bytes() and thus
[__]blk_end_request_all() relies on rq->data_len for PC commands.
Drivers which want to report residual count should first cache the
total request length, update rq->data_len and then complete the
request with the cached data length.
Secondly, it makes requests default to reporting full residual count,
ie. reporting that no data transfer occurred. The residual count is
an exception not the norm; however, the driver should clear
rq->data_len to zero to signify the normal cases while leaving it
alone means no data transfer occurred at all. This reverse default
behavior complicates code unnecessarily and renders block PC on some
drivers (ide-tape/floppy) unuseable.
This patch adds rq->resid_len which is used only for residual count.
While at it, remove now unnecessasry blk_rq_bytes() caching in
ide_pc_intr() as rq->data_len is not changed anymore.
[ Impact: cleanup residual count handling, report 0 resid by default ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
---
block/bsg.c | 8 +++---
block/scsi_ioctl.c | 2 +-
drivers/block/cciss.c | 13 +++-------
drivers/block/ub.c | 6 +---
drivers/ide/ide-atapi.c | 9 +------
drivers/ide/ide-cd.c | 13 ++++------
drivers/ide/ide-tape.c | 4 +-
drivers/message/fusion/mptsas.c | 3 +-
drivers/scsi/libsas/sas_expander.c | 6 +----
drivers/scsi/libsas/sas_host_smp.c | 38 +++++++++++++++--------------
drivers/scsi/mpt2sas/mpt2sas_transport.c | 4 +--
drivers/scsi/scsi_lib.c | 24 +++++++++---------
drivers/scsi/sg.c | 2 +-
drivers/scsi/st.c | 2 +-
include/linux/blkdev.h | 1 +
15 files changed, 57 insertions(+), 78 deletions(-)
diff --git a/block/bsg.c b/block/bsg.c
index 206060e..2d746e3 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -445,14 +445,14 @@ static int blk_complete_sgv4_hdr_rq(struct request *rq, struct sg_io_v4 *hdr,
}
if (rq->next_rq) {
- hdr->dout_resid = rq->data_len;
- hdr->din_resid = rq->next_rq->data_len;
+ hdr->dout_resid = rq->resid_len;
+ hdr->din_resid = rq->next_rq->resid_len;
blk_rq_unmap_user(bidi_bio);
blk_put_request(rq->next_rq);
} else if (rq_data_dir(rq) == READ)
- hdr->din_resid = rq->data_len;
+ hdr->din_resid = rq->resid_len;
else
- hdr->dout_resid = rq->data_len;
+ hdr->dout_resid = rq->resid_len;
/*
* If the request generated a negative error number, return it
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 58cf456..a9670dd 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -230,7 +230,7 @@ static int blk_complete_sghdr_rq(struct request *rq, struct sg_io_hdr *hdr,
hdr->info = 0;
if (hdr->masked_status || hdr->host_status || hdr->driver_status)
hdr->info |= SG_INFO_CHECK;
- hdr->resid = rq->data_len;
+ hdr->resid = rq->resid_len;
hdr->sb_len_wr = 0;
if (rq->sense_len && hdr->sbp) {
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 4d4d5e0..f22d493 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -1299,7 +1299,6 @@ static void cciss_softirq_done(struct request *rq)
{
CommandList_struct *cmd = rq->completion_data;
ctlr_info_t *h = hba[cmd->ctlr];
- unsigned int nr_bytes;
unsigned long flags;
u64bit temp64;
int i, ddir;
@@ -1321,15 +1320,11 @@ static void cciss_softirq_done(struct request *rq)
printk("Done with %p\n", rq);
#endif /* CCISS_DEBUG */
- /*
- * Store the full size and set the residual count for pc requests
- */
- nr_bytes = blk_rq_bytes(rq);
+ /* set the residual count for pc requests */
if (blk_pc_request(rq))
- rq->data_len = cmd->err_info->ResidualCnt;
+ rq->resid_len = cmd->err_info->ResidualCnt;
- if (blk_end_request(rq, (rq->errors == 0) ? 0 : -EIO, nr_bytes))
- BUG();
+ blk_end_request_all(rq, (rq->errors == 0) ? 0 : -EIO);
spin_lock_irqsave(&h->lock, flags);
cmd_free(h, cmd, 1);
@@ -2691,7 +2686,7 @@ static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
printk(KERN_WARNING "cciss: cmd %p has"
" completed with data underrun "
"reported\n", cmd);
- cmd->rq->data_len = cmd->err_info->ResidualCnt;
+ cmd->rq->resid_len = cmd->err_info->ResidualCnt;
}
break;
case CMD_DATA_OVERRUN:
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index 689cd27..8c2cc71 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -783,10 +783,8 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
if (cmd->error == 0) {
if (blk_pc_request(rq)) {
- if (cmd->act_len >= rq->data_len)
- rq->data_len = 0;
- else
- rq->data_len -= cmd->act_len;
+ if (cmd->act_len < rq->data_len)
+ rq->resid_len = rq->data_len - cmd->act_len;
scsi_status = 0;
} else {
if (cmd->act_len != cmd->len) {
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index afe5a43..e4a02a0 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -367,7 +367,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
/* No more interrupts */
if ((stat & ATA_DRQ) == 0) {
int uptodate, error;
- unsigned int done;
debug_log("Packet command completed, %d bytes transferred\n",
pc->xferred);
@@ -406,12 +405,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0)
dsc = 1;
- /*
- * ->pc_callback() might change rq->data_len for
- * residual count, cache total length.
- */
- done = blk_rq_bytes(rq);
-
/* Command finished - Call the callback function */
uptodate = drive->pc_callback(drive, dsc);
@@ -431,7 +424,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
error = uptodate ? 0 : -EIO;
}
- ide_complete_rq(drive, error, done);
+ ide_complete_rq(drive, error, blk_rq_bytes(rq));
return ide_stopped;
}
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 6736287..8bbe222 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -519,7 +519,7 @@ int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd,
error = blk_execute_rq(drive->queue, info->disk, rq, 0);
if (buffer)
- *bufflen = rq->data_len;
+ *bufflen = rq->resid_len;
flags = rq->cmd_flags;
blk_put_request(rq);
@@ -707,11 +707,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
out_end:
if (blk_pc_request(rq) && rc == 0) {
- unsigned int dlen = rq->data_len;
-
- rq->data_len = 0;
-
- if (blk_end_request(rq, 0, dlen))
+ if (blk_end_request(rq, 0, rq->data_len))
BUG();
hwif->rq = NULL;
@@ -740,9 +736,10 @@ out_end:
nsectors = 1;
if (blk_fs_request(rq) == 0) {
- rq->data_len -= (cmd->nbytes - cmd->nleft);
+ rq->resid_len = rq->data_len -
+ (cmd->nbytes - cmd->nleft);
if (uptodate == 0 && (cmd->tf_flags & IDE_TFLAG_WRITE))
- rq->data_len += cmd->last_xfer_len;
+ rq->resid_len += cmd->last_xfer_len;
}
ide_complete_rq(drive, uptodate ? 0 : -EIO, nsectors << 9);
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 7149224..3813a0e 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -380,7 +380,7 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)
}
tape->first_frame += blocks;
- rq->data_len -= blocks * tape->blk_size;
+ rq->resid_len = blk_rq_bytes(rq) - blocks * tape->blk_size;
if (pc->error) {
uptodate = 0;
@@ -903,7 +903,7 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size)
blk_execute_rq(drive->queue, tape->disk, rq, 0);
/* calculate the number of transferred bytes and update buffer state */
- size -= rq->data_len;
+ size -= rq->resid_len;
tape->cur = tape->buf;
if (cmd == REQ_IDETAPE_READ)
tape->valid = size;
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index a9019f0..5d5f347 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -1357,8 +1357,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
smprep = (SmpPassthroughReply_t *)ioc->sas_mgmt.reply;
memcpy(req->sense, smprep, sizeof(*smprep));
req->sense_len = sizeof(*smprep);
- req->data_len = 0;
- rsp->data_len -= smprep->ResponseDataLength;
+ rsp->resid_len = rsp->data_len - smprep->ResponseDataLength;
} else {
printk(MYIOC_s_ERR_FMT "%s: smp passthru reply failed to be returned\n",
ioc->name, __func__);
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 3da02e4..6605ec9 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -1936,12 +1936,8 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
bio_data(rsp->bio), rsp->data_len);
if (ret > 0) {
/* positive number is the untransferred residual */
- rsp->data_len = ret;
- req->data_len = 0;
+ rsp->resid_len = ret;
ret = 0;
- } else if (ret == 0) {
- rsp->data_len = 0;
- req->data_len = 0;
}
return ret;
diff --git a/drivers/scsi/libsas/sas_host_smp.c b/drivers/scsi/libsas/sas_host_smp.c
index d110a36..89952ed 100644
--- a/drivers/scsi/libsas/sas_host_smp.c
+++ b/drivers/scsi/libsas/sas_host_smp.c
@@ -134,7 +134,7 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
{
u8 *req_data = NULL, *resp_data = NULL, *buf;
struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
- int error = -EINVAL, resp_data_len = rsp->data_len;
+ int error = -EINVAL;
/* eight is the minimum size for request and response frames */
if (req->data_len < 8 || rsp->data_len < 8)
@@ -176,17 +176,20 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
resp_data[1] = req_data[1];
resp_data[2] = SMP_RESP_FUNC_UNK;
+ req->resid_len = req->data_len;
+ rsp->resid_len = rsp->data_len;
+
switch (req_data[1]) {
case SMP_REPORT_GENERAL:
- req->data_len -= 8;
- resp_data_len -= 32;
+ req->resid_len -= 8;
+ rsp->resid_len -= 32;
resp_data[2] = SMP_RESP_FUNC_ACC;
resp_data[9] = sas_ha->num_phys;
break;
case SMP_REPORT_MANUF_INFO:
- req->data_len -= 8;
- resp_data_len -= 64;
+ req->resid_len -= 8;
+ rsp->resid_len -= 64;
resp_data[2] = SMP_RESP_FUNC_ACC;
memcpy(resp_data + 12, shost->hostt->name,
SAS_EXPANDER_VENDOR_ID_LEN);
@@ -199,13 +202,13 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
break;
case SMP_DISCOVER:
- req->data_len -= 16;
- if ((int)req->data_len < 0) {
- req->data_len = 0;
+ req->resid_len -= 16;
+ if ((int)req->resid_len < 0) {
+ req->resid_len = 0;
error = -EINVAL;
goto out;
}
- resp_data_len -= 56;
+ rsp->resid_len -= 56;
sas_host_smp_discover(sas_ha, resp_data, req_data[9]);
break;
@@ -215,13 +218,13 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
break;
case SMP_REPORT_PHY_SATA:
- req->data_len -= 16;
- if ((int)req->data_len < 0) {
- req->data_len = 0;
+ req->resid_len -= 16;
+ if ((int)req->resid_len < 0) {
+ req->resid_len = 0;
error = -EINVAL;
goto out;
}
- resp_data_len -= 60;
+ rsp->resid_len -= 60;
sas_report_phy_sata(sas_ha, resp_data, req_data[9]);
break;
@@ -238,13 +241,13 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
break;
case SMP_PHY_CONTROL:
- req->data_len -= 44;
- if ((int)req->data_len < 0) {
- req->data_len = 0;
+ req->resid_len -= 44;
+ if ((int)req->resid_len < 0) {
+ req->resid_len = 0;
error = -EINVAL;
goto out;
}
- resp_data_len -= 8;
+ rsp->resid_len -= 8;
sas_phy_control(sas_ha, req_data[9], req_data[10],
req_data[32] >> 4, req_data[33] >> 4,
resp_data);
@@ -265,7 +268,6 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
flush_kernel_dcache_page(bio_page(rsp->bio));
kunmap_atomic(buf - bio_offset(rsp->bio), KM_USER0);
local_irq_enable();
- rsp->data_len = resp_data_len;
out:
kfree(req_data);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c
index e03dc0b..53759c5 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_transport.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c
@@ -1170,9 +1170,7 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
memcpy(req->sense, mpi_reply, sizeof(*mpi_reply));
req->sense_len = sizeof(*mpi_reply);
- req->data_len = 0;
- rsp->data_len -= mpi_reply->ResponseDataLength;
-
+ rsp->resid_len = rsp->data_len - mpi_reply->ResponseDataLength;
} else {
dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT
"%s - no reply\n", ioc->name, __func__));
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index aa9fc57..7d49ef5 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -240,11 +240,11 @@ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
* is invalid. Prevent the garbage from being misinterpreted
* and prevent security leaks by zeroing out the excess data.
*/
- if (unlikely(req->data_len > 0 && req->data_len <= bufflen))
- memset(buffer + (bufflen - req->data_len), 0, req->data_len);
+ if (unlikely(req->resid_len > 0 && req->resid_len <= bufflen))
+ memset(buffer + (bufflen - req->resid_len), 0, req->resid_len);
if (resid)
- *resid = req->data_len;
+ *resid = req->resid_len;
ret = req->errors;
out:
blk_put_request(req);
@@ -549,7 +549,7 @@ static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int error,
int leftover = (req->hard_nr_sectors << 9);
if (blk_pc_request(req))
- leftover = req->data_len;
+ leftover = req->resid_len;
/* kill remainder if no retrys */
if (error && scsi_noretry_cmd(cmd))
@@ -673,11 +673,11 @@ void scsi_release_buffers(struct scsi_cmnd *cmd)
EXPORT_SYMBOL(scsi_release_buffers);
/*
- * Bidi commands Must be complete as a whole, both sides at once.
- * If part of the bytes were written and lld returned
- * scsi_in()->resid and/or scsi_out()->resid this information will be left
- * in req->data_len and req->next_rq->data_len. The upper-layer driver can
- * decide what to do with this information.
+ * Bidi commands Must be complete as a whole, both sides at once. If
+ * part of the bytes were written and lld returned scsi_in()->resid
+ * and/or scsi_out()->resid this information will be left in
+ * req->resid_len and req->next_rq->resid_len. The upper-layer driver
+ * can decide what to do with this information.
*/
static void scsi_end_bidi_request(struct scsi_cmnd *cmd)
{
@@ -685,8 +685,8 @@ static void scsi_end_bidi_request(struct scsi_cmnd *cmd)
unsigned int dlen = req->data_len;
unsigned int next_dlen = req->next_rq->data_len;
- req->data_len = scsi_out(cmd)->resid;
- req->next_rq->data_len = scsi_in(cmd)->resid;
+ req->resid_len = scsi_out(cmd)->resid;
+ req->next_rq->resid_len = scsi_in(cmd)->resid;
/* The req and req->next_rq have not been completed */
BUG_ON(blk_end_bidi_request(req, 0, dlen, next_dlen));
@@ -778,7 +778,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
scsi_end_bidi_request(cmd);
return;
}
- req->data_len = scsi_get_resid(cmd);
+ req->resid_len = scsi_get_resid(cmd);
}
BUG_ON(blk_bidi_rq(req)); /* bidi not support for !blk_pc_request yet */
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 82312df..dec4c70 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -1260,7 +1260,7 @@ static void sg_rq_end_io(struct request *rq, int uptodate)
sense = rq->sense;
result = rq->errors;
- resid = rq->data_len;
+ resid = rq->resid_len;
SCSI_LOG_TIMEOUT(4, printk("sg_cmd_done: %s, pack_id=%d, res=0x%x\n",
sdp->disk->disk_name, srp->header.pack_id, result));
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index eb24efe..8681b70 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -463,7 +463,7 @@ static void st_scsi_execute_end(struct request *req, int uptodate)
struct scsi_tape *STp = SRpnt->stp;
STp->buffer->cmdstat.midlevel_result = SRpnt->result = req->errors;
- STp->buffer->cmdstat.residual = req->data_len;
+ STp->buffer->cmdstat.residual = req->resid_len;
if (SRpnt->waiting)
complete(SRpnt->waiting);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 3a5b1bd..6a967ca 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -229,6 +229,7 @@ struct request {
unsigned int data_len;
unsigned int extra_len; /* length of alignment and padding */
unsigned int sense_len;
+ unsigned int resid_len; /* residual count */
void *sense;
unsigned long deadline;
--
1.6.0.2
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH 04/10] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
2009-04-29 9:13 ` Tejun Heo
@ 2009-04-29 9:13 ` Tejun Heo
-1 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 9:13 UTC (permalink / raw)
To: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petko
Cc: Tejun Heo
Implement accessors - blk_rq_pos(), blk_rq_sectors() and
blk_rq_cur_sectors() which return rq->sector, rq->hard_nr_sectors and
rq->hard_cur_sectors respectively and convert direct references of the
said fields to the accessors.
This is in preparation of request data length handling cleanup.
[ Impact: cleanup ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
---
block/blk-barrier.c | 2 +-
block/blk-core.c | 2 +-
block/cfq-iosched.c | 2 +-
drivers/block/ps3disk.c | 2 +-
drivers/block/viodasd.c | 6 +++---
drivers/block/xsysace.c | 10 +++++-----
drivers/ide/ide-cd.c | 8 ++++----
drivers/ide/ide-io.c | 4 ++--
drivers/message/i2o/i2o_block.c | 2 +-
drivers/scsi/scsi_lib.c | 2 +-
include/linux/blkdev.h | 23 ++++++++++++++++++++---
kernel/trace/blktrace.c | 4 ++--
12 files changed, 42 insertions(+), 25 deletions(-)
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index c8d0876..c167de5 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -163,7 +163,7 @@ static inline bool start_ordered(struct request_queue *q, struct request **rqp)
* For an empty barrier, there's no actual BAR request, which
* in turn makes POSTFLUSH unnecessary. Mask them off.
*/
- if (!rq->hard_nr_sectors) {
+ if (!blk_rq_sectors(rq)) {
q->ordered &= ~(QUEUE_ORDERED_DO_BAR |
QUEUE_ORDERED_DO_POSTFLUSH);
/*
diff --git a/block/blk-core.c b/block/blk-core.c
index 394c5bd..895e55b 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1683,7 +1683,7 @@ static void blk_account_io_done(struct request *req)
unsigned int blk_rq_bytes(struct request *rq)
{
if (blk_fs_request(rq))
- return rq->hard_nr_sectors << 9;
+ return blk_rq_sectors(rq) << 9;
return rq->data_len;
}
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index def0c69..575083a 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -760,7 +760,7 @@ static void cfq_activate_request(struct request_queue *q, struct request *rq)
cfq_log_cfqq(cfqd, RQ_CFQQ(rq), "activate rq, drv=%d",
cfqd->rq_in_driver);
- cfqd->last_position = rq->hard_sector + rq->hard_nr_sectors;
+ cfqd->last_position = blk_rq_pos(rq) + blk_rq_sectors(rq);
}
static void cfq_deactivate_request(struct request_queue *q, struct request *rq)
diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c
index f6586e4..c238867 100644
--- a/drivers/block/ps3disk.c
+++ b/drivers/block/ps3disk.c
@@ -136,7 +136,7 @@ static int ps3disk_submit_request_sg(struct ps3_storage_device *dev,
dev_dbg(&dev->sbd.core,
"%s:%u: %s req has %u bvecs for %lu sectors %lu hard sectors\n",
__func__, __LINE__, op, n, req->nr_sectors,
- req->hard_nr_sectors);
+ blk_rq_sectors(req));
#endif
start_sector = req->sector * priv->blocking_factor;
diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c
index ecccf65..e821eed 100644
--- a/drivers/block/viodasd.c
+++ b/drivers/block/viodasd.c
@@ -368,12 +368,12 @@ static void do_viodasd_request(struct request_queue *q)
blkdev_dequeue_request(req);
/* check that request contains a valid command */
if (!blk_fs_request(req)) {
- viodasd_end_request(req, -EIO, req->hard_nr_sectors);
+ viodasd_end_request(req, -EIO, blk_rq_sectors(req));
continue;
}
/* Try sending the request */
if (send_request(req) != 0)
- viodasd_end_request(req, -EIO, req->hard_nr_sectors);
+ viodasd_end_request(req, -EIO, blk_rq_sectors(req));
}
}
@@ -590,7 +590,7 @@ static int viodasd_handle_read_write(struct vioblocklpevent *bevent)
err = vio_lookup_rc(viodasd_err_table, bevent->sub_result);
printk(VIOD_KERN_WARNING "read/write error %d:0x%04x (%s)\n",
event->xRc, bevent->sub_result, err->msg);
- num_sect = req->hard_nr_sectors;
+ num_sect = blk_rq_sectors(req);
}
qlock = req->q->queue_lock;
spin_lock_irqsave(qlock, irq_flags);
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index b1e1d7e..5722931 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -645,8 +645,8 @@ static void ace_fsm_dostate(struct ace_device *ace)
/* Okay, it's a data request, set it up for transfer */
dev_dbg(ace->dev,
- "request: sec=%llx hcnt=%lx, ccnt=%x, dir=%i\n",
- (unsigned long long) req->sector, req->hard_nr_sectors,
+ "request: sec=%llx hcnt=%x, ccnt=%x, dir=%i\n",
+ (unsigned long long) req->sector, blk_rq_sectors(req),
req->current_nr_sectors, rq_data_dir(req));
ace->req = req;
@@ -654,7 +654,7 @@ static void ace_fsm_dostate(struct ace_device *ace)
ace->data_count = req->current_nr_sectors * ACE_BUF_PER_SECTOR;
ace_out32(ace, ACE_MPULBA, req->sector & 0x0FFFFFFF);
- count = req->hard_nr_sectors;
+ count = blk_rq_sectors(req);
if (rq_data_dir(req)) {
/* Kick off write request */
dev_dbg(ace->dev, "write data\n");
@@ -719,8 +719,8 @@ static void ace_fsm_dostate(struct ace_device *ace)
/* bio finished; is there another one? */
if (__blk_end_request(ace->req, 0,
blk_rq_cur_bytes(ace->req))) {
- /* dev_dbg(ace->dev, "next block; h=%li c=%i\n",
- * ace->req->hard_nr_sectors,
+ /* dev_dbg(ace->dev, "next block; h=%u c=%u\n",
+ * blk_rq_sectors(ace->req),
* ace->req->current_nr_sectors);
*/
ace->data_ptr = ace->req->buffer;
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 8bbe222..182320d 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -730,7 +730,7 @@ out_end:
if (blk_pc_request(rq))
nsectors = (rq->data_len + 511) >> 9;
else
- nsectors = rq->hard_nr_sectors;
+ nsectors = blk_rq_sectors(rq);
if (nsectors == 0)
nsectors = 1;
@@ -875,7 +875,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
return ide_issue_pc(drive, &cmd);
out_end:
- nsectors = rq->hard_nr_sectors;
+ nsectors = blk_rq_sectors(rq);
if (nsectors == 0)
nsectors = 1;
@@ -1359,8 +1359,8 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
static int ide_cdrom_prep_fs(struct request_queue *q, struct request *rq)
{
int hard_sect = queue_hardsect_size(q);
- long block = (long)rq->hard_sector / (hard_sect >> 9);
- unsigned long blocks = rq->hard_nr_sectors / (hard_sect >> 9);
+ long block = (long)blk_rq_pos(rq) / (hard_sect >> 9);
+ unsigned long blocks = blk_rq_sectors(rq) / (hard_sect >> 9);
memset(rq->cmd, 0, BLK_MAX_CDB);
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index a0309ea..df23bcb 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -118,7 +118,7 @@ unsigned int ide_rq_bytes(struct request *rq)
if (blk_pc_request(rq))
return rq->data_len;
else
- return rq->hard_cur_sectors << 9;
+ return blk_rq_cur_sectors(rq) << 9;
}
EXPORT_SYMBOL_GPL(ide_rq_bytes);
@@ -133,7 +133,7 @@ int ide_complete_rq(ide_drive_t *drive, int error, unsigned int nr_bytes)
* and complete the whole request right now
*/
if (blk_noretry_request(rq) && error <= 0)
- nr_bytes = rq->hard_nr_sectors << 9;
+ nr_bytes = blk_rq_sectors(rq) << 9;
rc = ide_end_rq(drive, rq, error, nr_bytes);
if (rc == 0)
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index 221317e..56e60f0 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -427,7 +427,7 @@ static void i2o_block_end_request(struct request *req, int error,
unsigned long flags;
if (blk_end_request(req, error, nr_bytes)) {
- int leftover = (req->hard_nr_sectors << KERNEL_SECTOR_SHIFT);
+ int leftover = (blk_rq_sectors(req) << KERNEL_SECTOR_SHIFT);
if (blk_pc_request(req))
leftover = req->data_len;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 7d49ef5..9ff0ca9 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -546,7 +546,7 @@ static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int error,
* to queue the remainder of them.
*/
if (blk_end_request(req, error, bytes)) {
- int leftover = (req->hard_nr_sectors << 9);
+ int leftover = blk_rq_sectors(req) << 9;
if (blk_pc_request(req))
leftover = req->resid_len;
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 6a967ca..1e18ef7 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -832,13 +832,30 @@ static inline void blk_run_address_space(struct address_space *mapping)
extern void blkdev_dequeue_request(struct request *req);
/*
- * blk_end_request() takes bytes instead of sectors as a complete size.
- * blk_rq_bytes() returns bytes left to complete in the entire request.
- * blk_rq_cur_bytes() returns bytes left to complete in the current segment.
+ * blk_rq_pos() : the current sector
+ * blk_rq_bytes() : bytes left in the entire request
+ * blk_rq_cur_bytes() : bytes left in the current segment
+ * blk_rq_sectors() : sectors left in the entire request
+ * blk_rq_cur_sectors() : sectors left in the current segment
*/
+static inline sector_t blk_rq_pos(struct request *rq)
+{
+ return rq->hard_sector;
+}
+
extern unsigned int blk_rq_bytes(struct request *rq);
extern unsigned int blk_rq_cur_bytes(struct request *rq);
+static inline unsigned int blk_rq_sectors(struct request *rq)
+{
+ return rq->hard_nr_sectors;
+}
+
+static inline unsigned int blk_rq_cur_sectors(struct request *rq)
+{
+ return rq->hard_cur_sectors;
+}
+
/*
* Request completion related functions.
*
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index 921ef5d..42f1c11 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -646,7 +646,7 @@ static void blk_add_trace_rq(struct request_queue *q, struct request *rq,
rq->cmd_len, rq->cmd);
} else {
what |= BLK_TC_ACT(BLK_TC_FS);
- __blk_add_trace(bt, rq->hard_sector, rq->hard_nr_sectors << 9,
+ __blk_add_trace(bt, blk_rq_pos(rq), blk_rq_sectors(rq) << 9,
rw, what, rq->errors, 0, NULL);
}
}
@@ -857,7 +857,7 @@ void blk_add_driver_data(struct request_queue *q,
__blk_add_trace(bt, 0, rq->data_len, 0, BLK_TA_DRV_DATA,
rq->errors, len, data);
else
- __blk_add_trace(bt, rq->hard_sector, rq->hard_nr_sectors << 9,
+ __blk_add_trace(bt, blk_rq_pos(rq), blk_rq_sectors(rq) << 9,
0, BLK_TA_DRV_DATA, rq->errors, len, data);
}
EXPORT_SYMBOL_GPL(blk_add_driver_data);
--
1.6.0.2
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH 04/10] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
@ 2009-04-29 9:13 ` Tejun Heo
0 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 9:13 UTC (permalink / raw)
To: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, grant.likely, paul.clements,
jesper.juhl, tim, jeremy, adrian, oakad, dwmw2, schwidefsky,
ballabio_dario, davem, rusty, Markus.Lidel, bharrosh
Cc: Tejun Heo
Implement accessors - blk_rq_pos(), blk_rq_sectors() and
blk_rq_cur_sectors() which return rq->sector, rq->hard_nr_sectors and
rq->hard_cur_sectors respectively and convert direct references of the
said fields to the accessors.
This is in preparation of request data length handling cleanup.
[ Impact: cleanup ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
---
block/blk-barrier.c | 2 +-
block/blk-core.c | 2 +-
block/cfq-iosched.c | 2 +-
drivers/block/ps3disk.c | 2 +-
drivers/block/viodasd.c | 6 +++---
drivers/block/xsysace.c | 10 +++++-----
drivers/ide/ide-cd.c | 8 ++++----
drivers/ide/ide-io.c | 4 ++--
drivers/message/i2o/i2o_block.c | 2 +-
drivers/scsi/scsi_lib.c | 2 +-
include/linux/blkdev.h | 23 ++++++++++++++++++++---
kernel/trace/blktrace.c | 4 ++--
12 files changed, 42 insertions(+), 25 deletions(-)
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index c8d0876..c167de5 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -163,7 +163,7 @@ static inline bool start_ordered(struct request_queue *q, struct request **rqp)
* For an empty barrier, there's no actual BAR request, which
* in turn makes POSTFLUSH unnecessary. Mask them off.
*/
- if (!rq->hard_nr_sectors) {
+ if (!blk_rq_sectors(rq)) {
q->ordered &= ~(QUEUE_ORDERED_DO_BAR |
QUEUE_ORDERED_DO_POSTFLUSH);
/*
diff --git a/block/blk-core.c b/block/blk-core.c
index 394c5bd..895e55b 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1683,7 +1683,7 @@ static void blk_account_io_done(struct request *req)
unsigned int blk_rq_bytes(struct request *rq)
{
if (blk_fs_request(rq))
- return rq->hard_nr_sectors << 9;
+ return blk_rq_sectors(rq) << 9;
return rq->data_len;
}
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index def0c69..575083a 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -760,7 +760,7 @@ static void cfq_activate_request(struct request_queue *q, struct request *rq)
cfq_log_cfqq(cfqd, RQ_CFQQ(rq), "activate rq, drv=%d",
cfqd->rq_in_driver);
- cfqd->last_position = rq->hard_sector + rq->hard_nr_sectors;
+ cfqd->last_position = blk_rq_pos(rq) + blk_rq_sectors(rq);
}
static void cfq_deactivate_request(struct request_queue *q, struct request *rq)
diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c
index f6586e4..c238867 100644
--- a/drivers/block/ps3disk.c
+++ b/drivers/block/ps3disk.c
@@ -136,7 +136,7 @@ static int ps3disk_submit_request_sg(struct ps3_storage_device *dev,
dev_dbg(&dev->sbd.core,
"%s:%u: %s req has %u bvecs for %lu sectors %lu hard sectors\n",
__func__, __LINE__, op, n, req->nr_sectors,
- req->hard_nr_sectors);
+ blk_rq_sectors(req));
#endif
start_sector = req->sector * priv->blocking_factor;
diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c
index ecccf65..e821eed 100644
--- a/drivers/block/viodasd.c
+++ b/drivers/block/viodasd.c
@@ -368,12 +368,12 @@ static void do_viodasd_request(struct request_queue *q)
blkdev_dequeue_request(req);
/* check that request contains a valid command */
if (!blk_fs_request(req)) {
- viodasd_end_request(req, -EIO, req->hard_nr_sectors);
+ viodasd_end_request(req, -EIO, blk_rq_sectors(req));
continue;
}
/* Try sending the request */
if (send_request(req) != 0)
- viodasd_end_request(req, -EIO, req->hard_nr_sectors);
+ viodasd_end_request(req, -EIO, blk_rq_sectors(req));
}
}
@@ -590,7 +590,7 @@ static int viodasd_handle_read_write(struct vioblocklpevent *bevent)
err = vio_lookup_rc(viodasd_err_table, bevent->sub_result);
printk(VIOD_KERN_WARNING "read/write error %d:0x%04x (%s)\n",
event->xRc, bevent->sub_result, err->msg);
- num_sect = req->hard_nr_sectors;
+ num_sect = blk_rq_sectors(req);
}
qlock = req->q->queue_lock;
spin_lock_irqsave(qlock, irq_flags);
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index b1e1d7e..5722931 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -645,8 +645,8 @@ static void ace_fsm_dostate(struct ace_device *ace)
/* Okay, it's a data request, set it up for transfer */
dev_dbg(ace->dev,
- "request: sec=%llx hcnt=%lx, ccnt=%x, dir=%i\n",
- (unsigned long long) req->sector, req->hard_nr_sectors,
+ "request: sec=%llx hcnt=%x, ccnt=%x, dir=%i\n",
+ (unsigned long long) req->sector, blk_rq_sectors(req),
req->current_nr_sectors, rq_data_dir(req));
ace->req = req;
@@ -654,7 +654,7 @@ static void ace_fsm_dostate(struct ace_device *ace)
ace->data_count = req->current_nr_sectors * ACE_BUF_PER_SECTOR;
ace_out32(ace, ACE_MPULBA, req->sector & 0x0FFFFFFF);
- count = req->hard_nr_sectors;
+ count = blk_rq_sectors(req);
if (rq_data_dir(req)) {
/* Kick off write request */
dev_dbg(ace->dev, "write data\n");
@@ -719,8 +719,8 @@ static void ace_fsm_dostate(struct ace_device *ace)
/* bio finished; is there another one? */
if (__blk_end_request(ace->req, 0,
blk_rq_cur_bytes(ace->req))) {
- /* dev_dbg(ace->dev, "next block; h=%li c=%i\n",
- * ace->req->hard_nr_sectors,
+ /* dev_dbg(ace->dev, "next block; h=%u c=%u\n",
+ * blk_rq_sectors(ace->req),
* ace->req->current_nr_sectors);
*/
ace->data_ptr = ace->req->buffer;
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 8bbe222..182320d 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -730,7 +730,7 @@ out_end:
if (blk_pc_request(rq))
nsectors = (rq->data_len + 511) >> 9;
else
- nsectors = rq->hard_nr_sectors;
+ nsectors = blk_rq_sectors(rq);
if (nsectors == 0)
nsectors = 1;
@@ -875,7 +875,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
return ide_issue_pc(drive, &cmd);
out_end:
- nsectors = rq->hard_nr_sectors;
+ nsectors = blk_rq_sectors(rq);
if (nsectors == 0)
nsectors = 1;
@@ -1359,8 +1359,8 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
static int ide_cdrom_prep_fs(struct request_queue *q, struct request *rq)
{
int hard_sect = queue_hardsect_size(q);
- long block = (long)rq->hard_sector / (hard_sect >> 9);
- unsigned long blocks = rq->hard_nr_sectors / (hard_sect >> 9);
+ long block = (long)blk_rq_pos(rq) / (hard_sect >> 9);
+ unsigned long blocks = blk_rq_sectors(rq) / (hard_sect >> 9);
memset(rq->cmd, 0, BLK_MAX_CDB);
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index a0309ea..df23bcb 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -118,7 +118,7 @@ unsigned int ide_rq_bytes(struct request *rq)
if (blk_pc_request(rq))
return rq->data_len;
else
- return rq->hard_cur_sectors << 9;
+ return blk_rq_cur_sectors(rq) << 9;
}
EXPORT_SYMBOL_GPL(ide_rq_bytes);
@@ -133,7 +133,7 @@ int ide_complete_rq(ide_drive_t *drive, int error, unsigned int nr_bytes)
* and complete the whole request right now
*/
if (blk_noretry_request(rq) && error <= 0)
- nr_bytes = rq->hard_nr_sectors << 9;
+ nr_bytes = blk_rq_sectors(rq) << 9;
rc = ide_end_rq(drive, rq, error, nr_bytes);
if (rc == 0)
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index 221317e..56e60f0 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -427,7 +427,7 @@ static void i2o_block_end_request(struct request *req, int error,
unsigned long flags;
if (blk_end_request(req, error, nr_bytes)) {
- int leftover = (req->hard_nr_sectors << KERNEL_SECTOR_SHIFT);
+ int leftover = (blk_rq_sectors(req) << KERNEL_SECTOR_SHIFT);
if (blk_pc_request(req))
leftover = req->data_len;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 7d49ef5..9ff0ca9 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -546,7 +546,7 @@ static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int error,
* to queue the remainder of them.
*/
if (blk_end_request(req, error, bytes)) {
- int leftover = (req->hard_nr_sectors << 9);
+ int leftover = blk_rq_sectors(req) << 9;
if (blk_pc_request(req))
leftover = req->resid_len;
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 6a967ca..1e18ef7 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -832,13 +832,30 @@ static inline void blk_run_address_space(struct address_space *mapping)
extern void blkdev_dequeue_request(struct request *req);
/*
- * blk_end_request() takes bytes instead of sectors as a complete size.
- * blk_rq_bytes() returns bytes left to complete in the entire request.
- * blk_rq_cur_bytes() returns bytes left to complete in the current segment.
+ * blk_rq_pos() : the current sector
+ * blk_rq_bytes() : bytes left in the entire request
+ * blk_rq_cur_bytes() : bytes left in the current segment
+ * blk_rq_sectors() : sectors left in the entire request
+ * blk_rq_cur_sectors() : sectors left in the current segment
*/
+static inline sector_t blk_rq_pos(struct request *rq)
+{
+ return rq->hard_sector;
+}
+
extern unsigned int blk_rq_bytes(struct request *rq);
extern unsigned int blk_rq_cur_bytes(struct request *rq);
+static inline unsigned int blk_rq_sectors(struct request *rq)
+{
+ return rq->hard_nr_sectors;
+}
+
+static inline unsigned int blk_rq_cur_sectors(struct request *rq)
+{
+ return rq->hard_cur_sectors;
+}
+
/*
* Request completion related functions.
*
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index 921ef5d..42f1c11 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -646,7 +646,7 @@ static void blk_add_trace_rq(struct request_queue *q, struct request *rq,
rq->cmd_len, rq->cmd);
} else {
what |= BLK_TC_ACT(BLK_TC_FS);
- __blk_add_trace(bt, rq->hard_sector, rq->hard_nr_sectors << 9,
+ __blk_add_trace(bt, blk_rq_pos(rq), blk_rq_sectors(rq) << 9,
rw, what, rq->errors, 0, NULL);
}
}
@@ -857,7 +857,7 @@ void blk_add_driver_data(struct request_queue *q,
__blk_add_trace(bt, 0, rq->data_len, 0, BLK_TA_DRV_DATA,
rq->errors, len, data);
else
- __blk_add_trace(bt, rq->hard_sector, rq->hard_nr_sectors << 9,
+ __blk_add_trace(bt, blk_rq_pos(rq), blk_rq_sectors(rq) << 9,
0, BLK_TA_DRV_DATA, rq->errors, len, data);
}
EXPORT_SYMBOL_GPL(blk_add_driver_data);
--
1.6.0.2
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH 05/10] block: convert to pos and nr_sectors accessors
2009-04-29 9:13 ` Tejun Heo
@ 2009-04-29 9:13 ` Tejun Heo
-1 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 9:13 UTC (permalink / raw)
To: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petko
Cc: Tejun Heo, Jeff Garzik
With recent cleanups, there is no place where low level driver
directly manipulates request fields. This means that the 'hard'
request fields always equal the !hard fields. Convert all
rq->sectors, nr_sectors and current_nr_sectors references to
accessors.
[ Impact: use pos and nr_sectors accessors ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Chirag Kantharia <chirag.kantharia@hp.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Jesper Juhl <jesper.juhl@gmail.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Dario Ballabio <ballabio_dario@emc.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
---
arch/um/drivers/ubd_kern.c | 2 +-
block/as-iosched.c | 18 ++++++-----
block/blk-barrier.c | 2 +-
block/blk-core.c | 17 +++++------
block/blk-merge.c | 10 +++---
block/cfq-iosched.c | 18 ++++++------
block/deadline-iosched.c | 2 +-
block/elevator.c | 22 +++++++-------
drivers/block/DAC960.c | 6 ++--
drivers/block/amiflop.c | 6 ++--
drivers/block/ataflop.c | 10 +++---
drivers/block/cciss.c | 22 +++++++-------
drivers/block/cpqarray.c | 9 +++--
drivers/block/floppy.c | 53 ++++++++++++++++++-----------------
drivers/block/hd.c | 14 ++++----
drivers/block/nbd.c | 12 ++++----
drivers/block/paride/pcd.c | 4 +-
drivers/block/paride/pd.c | 8 ++--
drivers/block/paride/pf.c | 8 ++--
drivers/block/ps3disk.c | 9 ++---
drivers/block/sunvdc.c | 2 +-
drivers/block/swim3.c | 34 ++++++++++++----------
drivers/block/sx8.c | 6 ++--
drivers/block/ub.c | 6 ++--
drivers/block/viodasd.c | 2 +-
drivers/block/virtio_blk.c | 2 +-
drivers/block/xd.c | 4 +-
drivers/block/xen-blkfront.c | 11 +++----
drivers/block/xsysace.c | 17 ++++++-----
drivers/block/z2ram.c | 6 ++--
drivers/cdrom/gdrom.c | 6 ++--
drivers/cdrom/viocd.c | 2 +-
drivers/memstick/core/mspro_block.c | 6 ++--
drivers/message/i2o/i2o_block.c | 20 +++++++------
drivers/mmc/card/block.c | 10 +++---
drivers/mtd/mtd_blkdevs.c | 7 ++--
drivers/s390/block/dasd.c | 2 +-
drivers/s390/block/dasd_diag.c | 5 ++-
drivers/s390/block/dasd_eckd.c | 6 ++--
drivers/s390/block/dasd_fba.c | 7 ++--
drivers/s390/char/tape_34xx.c | 2 +-
drivers/s390/char/tape_3590.c | 2 +-
drivers/s390/char/tape_block.c | 2 +-
drivers/sbus/char/jsflash.c | 4 +-
drivers/scsi/eata.c | 24 ++++++++--------
drivers/scsi/lpfc/lpfc_scsi.c | 22 +++++++-------
drivers/scsi/scsi_lib.c | 6 ++--
drivers/scsi/sd.c | 24 ++++++++--------
drivers/scsi/sd_dif.c | 2 +-
drivers/scsi/sr.c | 15 +++++----
drivers/scsi/u14-34f.c | 22 ++++++++------
include/scsi/scsi_cmnd.h | 2 +-
52 files changed, 276 insertions(+), 264 deletions(-)
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 4330127..402ba8f 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -1239,7 +1239,7 @@ static void do_ubd_request(struct request_queue *q)
}
req = dev->request;
- sector = req->sector;
+ sector = blk_rq_pos(req);
while(dev->start_sg < dev->end_sg){
struct scatterlist *sg = &dev->sg[dev->start_sg];
diff --git a/block/as-iosched.c b/block/as-iosched.c
index 45bd070..7a12cf6 100644
--- a/block/as-iosched.c
+++ b/block/as-iosched.c
@@ -306,8 +306,8 @@ as_choose_req(struct as_data *ad, struct request *rq1, struct request *rq2)
data_dir = rq_is_sync(rq1);
last = ad->last_sector[data_dir];
- s1 = rq1->sector;
- s2 = rq2->sector;
+ s1 = blk_rq_pos(rq1);
+ s2 = blk_rq_pos(rq2);
BUG_ON(data_dir != rq_is_sync(rq2));
@@ -566,13 +566,15 @@ static void as_update_iohist(struct as_data *ad, struct as_io_context *aic,
as_update_thinktime(ad, aic, thinktime);
/* Calculate read -> read seek distance */
- if (aic->last_request_pos < rq->sector)
- seek_dist = rq->sector - aic->last_request_pos;
+ if (aic->last_request_pos < blk_rq_pos(rq))
+ seek_dist = blk_rq_pos(rq) -
+ aic->last_request_pos;
else
- seek_dist = aic->last_request_pos - rq->sector;
+ seek_dist = aic->last_request_pos -
+ blk_rq_pos(rq);
as_update_seekdist(ad, aic, seek_dist);
}
- aic->last_request_pos = rq->sector + rq->nr_sectors;
+ aic->last_request_pos = blk_rq_pos(rq) + blk_rq_sectors(rq);
set_bit(AS_TASK_IOSTARTED, &aic->state);
spin_unlock(&aic->lock);
}
@@ -587,7 +589,7 @@ static int as_close_req(struct as_data *ad, struct as_io_context *aic,
{
unsigned long delay; /* jiffies */
sector_t last = ad->last_sector[ad->batch_data_dir];
- sector_t next = rq->sector;
+ sector_t next = blk_rq_pos(rq);
sector_t delta; /* acceptable close offset (in sectors) */
sector_t s;
@@ -981,7 +983,7 @@ static void as_move_to_dispatch(struct as_data *ad, struct request *rq)
* This has to be set in order to be correctly updated by
* as_find_next_rq
*/
- ad->last_sector[data_dir] = rq->sector + rq->nr_sectors;
+ ad->last_sector[data_dir] = blk_rq_pos(rq) + blk_rq_sectors(rq);
if (data_dir == BLK_RW_SYNC) {
struct io_context *ioc = RQ_IOC(rq);
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index c167de5..8713c2f 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -324,7 +324,7 @@ int blkdev_issue_flush(struct block_device *bdev, sector_t *error_sector)
/*
* The driver must store the error location in ->bi_sector, if
* it supports it. For non-stacked drivers, this should be copied
- * from rq->sector.
+ * from blk_rq_pos(rq).
*/
if (error_sector)
*error_sector = bio->bi_sector;
diff --git a/block/blk-core.c b/block/blk-core.c
index 895e55b..82dc206 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -72,7 +72,7 @@ static void drive_stat_acct(struct request *rq, int new_io)
return;
cpu = part_stat_lock();
- part = disk_map_sector_rcu(rq->rq_disk, rq->sector);
+ part = disk_map_sector_rcu(rq->rq_disk, blk_rq_pos(rq));
if (!new_io)
part_stat_inc(cpu, part, merges[rw]);
@@ -185,10 +185,9 @@ void blk_dump_rq_flags(struct request *rq, char *msg)
rq->rq_disk ? rq->rq_disk->disk_name : "?", rq->cmd_type,
rq->cmd_flags);
- printk(KERN_INFO " sector %llu, nr/cnr %lu/%u\n",
- (unsigned long long)rq->sector,
- rq->nr_sectors,
- rq->current_nr_sectors);
+ printk(KERN_INFO " sector %llu, nr/cnr %u/%u\n",
+ (unsigned long long)blk_rq_pos(rq),
+ blk_rq_sectors(rq), blk_rq_cur_sectors(rq));
printk(KERN_INFO " bio %p, biotail %p, buffer %p, len %u\n",
rq->bio, rq->biotail,
rq->buffer, rq->data_len);
@@ -1557,7 +1556,7 @@ EXPORT_SYMBOL(submit_bio);
*/
int blk_rq_check_limits(struct request_queue *q, struct request *rq)
{
- if (rq->nr_sectors > q->max_sectors ||
+ if (blk_rq_sectors(rq) > q->max_sectors ||
rq->data_len > q->max_hw_sectors << 9) {
printk(KERN_ERR "%s: over max size limit.\n", __func__);
return -EIO;
@@ -1645,7 +1644,7 @@ static void blk_account_io_completion(struct request *req, unsigned int bytes)
int cpu;
cpu = part_stat_lock();
- part = disk_map_sector_rcu(req->rq_disk, req->sector);
+ part = disk_map_sector_rcu(req->rq_disk, blk_rq_pos(req));
part_stat_add(cpu, part, sectors[rw], bytes >> 9);
part_stat_unlock();
}
@@ -1665,7 +1664,7 @@ static void blk_account_io_done(struct request *req)
int cpu;
cpu = part_stat_lock();
- part = disk_map_sector_rcu(req->rq_disk, req->sector);
+ part = disk_map_sector_rcu(req->rq_disk, blk_rq_pos(req));
part_stat_inc(cpu, part, ios[rw]);
part_stat_add(cpu, part, ticks[rw], duration);
@@ -1846,7 +1845,7 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
if (error && (blk_fs_request(req) && !(req->cmd_flags & REQ_QUIET))) {
printk(KERN_ERR "end_request: I/O error, dev %s, sector %llu\n",
req->rq_disk ? req->rq_disk->disk_name : "?",
- (unsigned long long)req->sector);
+ (unsigned long long)blk_rq_pos(req));
}
blk_account_io_completion(req, nr_bytes);
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 23d2a6f..bf62a87 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -259,7 +259,7 @@ int ll_back_merge_fn(struct request_queue *q, struct request *req,
else
max_sectors = q->max_sectors;
- if (req->nr_sectors + bio_sectors(bio) > max_sectors) {
+ if (blk_rq_sectors(req) + bio_sectors(bio) > max_sectors) {
req->cmd_flags |= REQ_NOMERGE;
if (req == q->last_merge)
q->last_merge = NULL;
@@ -284,7 +284,7 @@ int ll_front_merge_fn(struct request_queue *q, struct request *req,
max_sectors = q->max_sectors;
- if (req->nr_sectors + bio_sectors(bio) > max_sectors) {
+ if (blk_rq_sectors(req) + bio_sectors(bio) > max_sectors) {
req->cmd_flags |= REQ_NOMERGE;
if (req == q->last_merge)
q->last_merge = NULL;
@@ -315,7 +315,7 @@ static int ll_merge_requests_fn(struct request_queue *q, struct request *req,
/*
* Will it become too large?
*/
- if ((req->nr_sectors + next->nr_sectors) > q->max_sectors)
+ if ((blk_rq_sectors(req) + blk_rq_sectors(next)) > q->max_sectors)
return 0;
total_phys_segments = req->nr_phys_segments + next->nr_phys_segments;
@@ -345,7 +345,7 @@ static void blk_account_io_merge(struct request *req)
int cpu;
cpu = part_stat_lock();
- part = disk_map_sector_rcu(req->rq_disk, req->sector);
+ part = disk_map_sector_rcu(req->rq_disk, blk_rq_pos(req));
part_round_stats(cpu, part);
part_dec_in_flight(part);
@@ -366,7 +366,7 @@ static int attempt_merge(struct request_queue *q, struct request *req,
/*
* not contiguous
*/
- if (req->sector + req->nr_sectors != next->sector)
+ if (blk_rq_pos(req) + blk_rq_sectors(req) != blk_rq_pos(next))
return 0;
if (rq_data_dir(req) != rq_data_dir(next)
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 575083a..db4d990 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -349,8 +349,8 @@ cfq_choose_req(struct cfq_data *cfqd, struct request *rq1, struct request *rq2)
else if (rq_is_meta(rq2) && !rq_is_meta(rq1))
return rq2;
- s1 = rq1->sector;
- s2 = rq2->sector;
+ s1 = blk_rq_pos(rq1);
+ s2 = blk_rq_pos(rq2);
last = cfqd->last_position;
@@ -949,10 +949,10 @@ static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd,
static inline sector_t cfq_dist_from_last(struct cfq_data *cfqd,
struct request *rq)
{
- if (rq->sector >= cfqd->last_position)
- return rq->sector - cfqd->last_position;
+ if (blk_rq_pos(rq) >= cfqd->last_position)
+ return blk_rq_pos(rq) - cfqd->last_position;
else
- return cfqd->last_position - rq->sector;
+ return cfqd->last_position - blk_rq_pos(rq);
}
#define CIC_SEEK_THR 8 * 1024
@@ -1918,10 +1918,10 @@ cfq_update_io_seektime(struct cfq_data *cfqd, struct cfq_io_context *cic,
if (!cic->last_request_pos)
sdist = 0;
- else if (cic->last_request_pos < rq->sector)
- sdist = rq->sector - cic->last_request_pos;
+ else if (cic->last_request_pos < blk_rq_pos(rq))
+ sdist = blk_rq_pos(rq) - cic->last_request_pos;
else
- sdist = cic->last_request_pos - rq->sector;
+ sdist = cic->last_request_pos - blk_rq_pos(rq);
/*
* Don't allow the seek distance to get too large from the
@@ -2071,7 +2071,7 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
cfq_update_io_seektime(cfqd, cic, rq);
cfq_update_idle_window(cfqd, cfqq, cic);
- cic->last_request_pos = rq->sector + rq->nr_sectors;
+ cic->last_request_pos = blk_rq_pos(rq) + blk_rq_sectors(rq);
if (cfqq == cfqd->active_queue) {
/*
diff --git a/block/deadline-iosched.c b/block/deadline-iosched.c
index c4d991d..b547cbc 100644
--- a/block/deadline-iosched.c
+++ b/block/deadline-iosched.c
@@ -138,7 +138,7 @@ deadline_merge(struct request_queue *q, struct request **req, struct bio *bio)
__rq = elv_rb_find(&dd->sort_list[bio_data_dir(bio)], sector);
if (__rq) {
- BUG_ON(sector != __rq->sector);
+ BUG_ON(sector != blk_rq_pos(__rq));
if (elv_rq_merge_ok(__rq, bio)) {
ret = ELEVATOR_FRONT_MERGE;
diff --git a/block/elevator.c b/block/elevator.c
index 1af5d9f..9189200 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -52,7 +52,7 @@ static const int elv_hash_shift = 6;
#define ELV_HASH_FN(sec) \
(hash_long(ELV_HASH_BLOCK((sec)), elv_hash_shift))
#define ELV_HASH_ENTRIES (1 << elv_hash_shift)
-#define rq_hash_key(rq) ((rq)->sector + (rq)->nr_sectors)
+#define rq_hash_key(rq) (blk_rq_pos(rq) + blk_rq_sectors(rq))
DEFINE_TRACE(block_rq_insert);
DEFINE_TRACE(block_rq_issue);
@@ -119,9 +119,9 @@ static inline int elv_try_merge(struct request *__rq, struct bio *bio)
* we can merge and sequence is ok, check if it's possible
*/
if (elv_rq_merge_ok(__rq, bio)) {
- if (__rq->sector + __rq->nr_sectors == bio->bi_sector)
+ if (blk_rq_pos(__rq) + blk_rq_sectors(__rq) == bio->bi_sector)
ret = ELEVATOR_BACK_MERGE;
- else if (__rq->sector - bio_sectors(bio) == bio->bi_sector)
+ else if (blk_rq_pos(__rq) - bio_sectors(bio) == bio->bi_sector)
ret = ELEVATOR_FRONT_MERGE;
}
@@ -370,9 +370,9 @@ struct request *elv_rb_add(struct rb_root *root, struct request *rq)
parent = *p;
__rq = rb_entry(parent, struct request, rb_node);
- if (rq->sector < __rq->sector)
+ if (blk_rq_pos(rq) < blk_rq_pos(__rq))
p = &(*p)->rb_left;
- else if (rq->sector > __rq->sector)
+ else if (blk_rq_pos(rq) > blk_rq_pos(__rq))
p = &(*p)->rb_right;
else
return __rq;
@@ -400,9 +400,9 @@ struct request *elv_rb_find(struct rb_root *root, sector_t sector)
while (n) {
rq = rb_entry(n, struct request, rb_node);
- if (sector < rq->sector)
+ if (sector < blk_rq_pos(rq))
n = n->rb_left;
- else if (sector > rq->sector)
+ else if (sector > blk_rq_pos(rq))
n = n->rb_right;
else
return rq;
@@ -441,14 +441,14 @@ void elv_dispatch_sort(struct request_queue *q, struct request *rq)
break;
if (pos->cmd_flags & stop_flags)
break;
- if (rq->sector >= boundary) {
- if (pos->sector < boundary)
+ if (blk_rq_pos(rq) >= boundary) {
+ if (blk_rq_pos(pos) < boundary)
continue;
} else {
- if (pos->sector >= boundary)
+ if (blk_rq_pos(pos) >= boundary)
break;
}
- if (rq->sector >= pos->sector)
+ if (blk_rq_pos(rq) >= blk_rq_pos(pos))
break;
}
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index f22ed6c..774ab05 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -3338,8 +3338,8 @@ static int DAC960_process_queue(DAC960_Controller_T *Controller, struct request_
}
Command->Completion = Request->end_io_data;
Command->LogicalDriveNumber = (long)Request->rq_disk->private_data;
- Command->BlockNumber = Request->sector;
- Command->BlockCount = Request->nr_sectors;
+ Command->BlockNumber = blk_rq_pos(Request);
+ Command->BlockCount = blk_rq_sectors(Request);
Command->Request = Request;
blkdev_dequeue_request(Request);
Command->SegmentCount = blk_rq_map_sg(req_q,
@@ -3431,7 +3431,7 @@ static void DAC960_queue_partial_rw(DAC960_Command_T *Command)
* successfully as possible.
*/
Command->SegmentCount = 1;
- Command->BlockNumber = Request->sector;
+ Command->BlockNumber = blk_rq_pos(Request);
Command->BlockCount = 1;
DAC960_QueueReadWriteCommand(Command);
return;
diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index 8ff95f2..e4a14b9 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -1351,13 +1351,13 @@ static void redo_fd_request(void)
drive = floppy - unit;
/* Here someone could investigate to be more efficient */
- for (cnt = 0; cnt < CURRENT->current_nr_sectors; cnt++) {
+ for (cnt = 0; cnt < blk_rq_cur_sectors(CURRENT); cnt++) {
#ifdef DEBUG
printk("fd: sector %ld + %d requested for %s\n",
- CURRENT->sector,cnt,
+ blk_rq_pos(CURRENT), cnt,
(rq_data_dir(CURRENT) == READ) ? "read" : "write");
#endif
- block = CURRENT->sector + cnt;
+ block = blk_rq_pos(CURRENT) + cnt;
if ((int)block > floppy->blocks) {
__blk_end_request_cur(CURRENT, -EIO);
goto repeat;
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 2506728..234024c 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -725,7 +725,7 @@ static void do_fd_action( int drive )
if (IS_BUFFERED( drive, ReqSide, ReqTrack )) {
if (ReqCmd == READ) {
copy_buffer( SECTOR_BUFFER(ReqSector), ReqData );
- if (++ReqCnt < CURRENT->current_nr_sectors) {
+ if (++ReqCnt < blk_rq_cur_sectors(CURRENT)) {
/* read next sector */
setup_req_params( drive );
goto repeat;
@@ -1130,7 +1130,7 @@ static void fd_rwsec_done1(int status)
}
}
- if (++ReqCnt < CURRENT->current_nr_sectors) {
+ if (++ReqCnt < blk_rq_cur_sectors(CURRENT)) {
/* read next sector */
setup_req_params( SelectedDrive );
do_fd_action( SelectedDrive );
@@ -1394,7 +1394,7 @@ static void redo_fd_request(void)
DPRINT(("redo_fd_request: CURRENT=%p dev=%s CURRENT->sector=%ld\n",
CURRENT, CURRENT ? CURRENT->rq_disk->disk_name : "",
- CURRENT ? CURRENT->sector : 0 ));
+ CURRENT ? blk_rq_pos(CURRENT) : 0 ));
IsFormatting = 0;
@@ -1440,7 +1440,7 @@ repeat:
UD.autoprobe = 0;
}
- if (CURRENT->sector + 1 > UDT->blocks) {
+ if (blk_rq_pos(CURRENT) + 1 > UDT->blocks) {
__blk_end_request_cur(CURRENT, -EIO);
goto repeat;
}
@@ -1450,7 +1450,7 @@ repeat:
ReqCnt = 0;
ReqCmd = rq_data_dir(CURRENT);
- ReqBlock = CURRENT->sector;
+ ReqBlock = blk_rq_pos(CURRENT);
ReqBuffer = CURRENT->buffer;
setup_req_params( drive );
do_fd_action( drive );
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index f22d493..ab7b04c 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -2835,10 +2835,10 @@ static void do_cciss_request(struct request_queue *q)
c->Request.Timeout = 0; // Don't time out
c->Request.CDB[0] =
(rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write;
- start_blk = creq->sector;
+ start_blk = blk_rq_pos(creq);
#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n", (int)creq->sector,
- (int)creq->nr_sectors);
+ printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n",
+ (int)blk_rq_pos(creq), (int)blk_rq_sectors(creq));
#endif /* CCISS_DEBUG */
sg_init_table(tmp_sg, MAXSGENTRIES);
@@ -2864,8 +2864,8 @@ static void do_cciss_request(struct request_queue *q)
h->maxSG = seg;
#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss: Submitting %lu sectors in %d segments\n",
- creq->nr_sectors, seg);
+ printk(KERN_DEBUG "cciss: Submitting %u sectors in %d segments\n",
+ blk_rq_sectors(creq), seg);
#endif /* CCISS_DEBUG */
c->Header.SGList = c->Header.SGTotal = seg;
@@ -2877,8 +2877,8 @@ static void do_cciss_request(struct request_queue *q)
c->Request.CDB[4] = (start_blk >> 8) & 0xff;
c->Request.CDB[5] = start_blk & 0xff;
c->Request.CDB[6] = 0; // (sect >> 24) & 0xff; MSB
- c->Request.CDB[7] = (creq->nr_sectors >> 8) & 0xff;
- c->Request.CDB[8] = creq->nr_sectors & 0xff;
+ c->Request.CDB[7] = (blk_rq_sectors(creq) >> 8) & 0xff;
+ c->Request.CDB[8] = blk_rq_sectors(creq) & 0xff;
c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0;
} else {
u32 upper32 = upper_32_bits(start_blk);
@@ -2893,10 +2893,10 @@ static void do_cciss_request(struct request_queue *q)
c->Request.CDB[7]= (start_blk >> 16) & 0xff;
c->Request.CDB[8]= (start_blk >> 8) & 0xff;
c->Request.CDB[9]= start_blk & 0xff;
- c->Request.CDB[10]= (creq->nr_sectors >> 24) & 0xff;
- c->Request.CDB[11]= (creq->nr_sectors >> 16) & 0xff;
- c->Request.CDB[12]= (creq->nr_sectors >> 8) & 0xff;
- c->Request.CDB[13]= creq->nr_sectors & 0xff;
+ c->Request.CDB[10]= (blk_rq_sectors(creq) >> 24) & 0xff;
+ c->Request.CDB[11]= (blk_rq_sectors(creq) >> 16) & 0xff;
+ c->Request.CDB[12]= (blk_rq_sectors(creq) >> 8) & 0xff;
+ c->Request.CDB[13]= blk_rq_sectors(creq) & 0xff;
c->Request.CDB[14] = c->Request.CDB[15] = 0;
}
} else if (blk_pc_request(creq)) {
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index 488a8f4..a5caeff 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -919,10 +919,11 @@ queue_next:
c->hdr.size = sizeof(rblk_t) >> 2;
c->size += sizeof(rblk_t);
- c->req.hdr.blk = creq->sector;
+ c->req.hdr.blk = blk_rq_pos(creq);
c->rq = creq;
DBGPX(
- printk("sector=%d, nr_sectors=%d\n", creq->sector, creq->nr_sectors);
+ printk("sector=%d, nr_sectors=%u\n",
+ blk_rq_pos(creq), blk_rq_sectors(creq));
);
sg_init_table(tmp_sg, SG_MAX);
seg = blk_rq_map_sg(q, creq, tmp_sg);
@@ -940,9 +941,9 @@ DBGPX(
tmp_sg[i].offset,
tmp_sg[i].length, dir);
}
-DBGPX( printk("Submitting %d sectors in %d segments\n", creq->nr_sectors, seg); );
+DBGPX( printk("Submitting %u sectors in %d segments\n", blk_rq_sectors(creq), seg); );
c->req.hdr.sg_cnt = seg;
- c->req.hdr.blk_cnt = creq->nr_sectors;
+ c->req.hdr.blk_cnt = blk_rq_sectors(creq);
c->req.hdr.cmd = (rq_data_dir(creq) == READ) ? IDA_READ : IDA_WRITE;
c->type = CMD_RWREQ;
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 1300df6..4524862 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -2303,7 +2303,7 @@ static void floppy_end_request(struct request *req, int error)
/* current_count_sectors can be zero if transfer failed */
if (error)
- nr_sectors = req->current_nr_sectors;
+ nr_sectors = blk_rq_cur_sectors(req);
if (__blk_end_request(req, error, nr_sectors << 9))
return;
@@ -2332,7 +2332,7 @@ static void request_done(int uptodate)
if (uptodate) {
/* maintain values for invalidation on geometry
* change */
- block = current_count_sectors + req->sector;
+ block = current_count_sectors + blk_rq_pos(req);
INFBOUND(DRS->maxblock, block);
if (block > _floppy->sect)
DRS->maxtrack = 1;
@@ -2346,10 +2346,10 @@ static void request_done(int uptodate)
/* record write error information */
DRWE->write_errors++;
if (DRWE->write_errors == 1) {
- DRWE->first_error_sector = req->sector;
+ DRWE->first_error_sector = blk_rq_pos(req);
DRWE->first_error_generation = DRS->generation;
}
- DRWE->last_error_sector = req->sector;
+ DRWE->last_error_sector = blk_rq_pos(req);
DRWE->last_error_generation = DRS->generation;
}
spin_lock_irqsave(q->queue_lock, flags);
@@ -2503,24 +2503,24 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2)
max_sector = transfer_size(ssize,
min(max_sector, max_sector_2),
- current_req->nr_sectors);
+ blk_rq_sectors(current_req));
if (current_count_sectors <= 0 && CT(COMMAND) == FD_WRITE &&
- buffer_max > fsector_t + current_req->nr_sectors)
+ buffer_max > fsector_t + blk_rq_sectors(current_req))
current_count_sectors = min_t(int, buffer_max - fsector_t,
- current_req->nr_sectors);
+ blk_rq_sectors(current_req));
remaining = current_count_sectors << 9;
#ifdef FLOPPY_SANITY_CHECK
- if ((remaining >> 9) > current_req->nr_sectors &&
+ if ((remaining >> 9) > blk_rq_sectors(current_req) &&
CT(COMMAND) == FD_WRITE) {
DPRINT("in copy buffer\n");
printk("current_count_sectors=%ld\n", current_count_sectors);
printk("remaining=%d\n", remaining >> 9);
- printk("current_req->nr_sectors=%ld\n",
- current_req->nr_sectors);
+ printk("current_req->nr_sectors=%u\n",
+ blk_rq_sectors(current_req));
printk("current_req->current_nr_sectors=%u\n",
- current_req->current_nr_sectors);
+ blk_rq_cur_sectors(current_req));
printk("max_sector=%d\n", max_sector);
printk("ssize=%d\n", ssize);
}
@@ -2530,7 +2530,7 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2)
dma_buffer = floppy_track_buffer + ((fsector_t - buffer_min) << 9);
- size = current_req->current_nr_sectors << 9;
+ size = blk_rq_cur_sectors(current_req) << 9;
rq_for_each_segment(bv, current_req, iter) {
if (!remaining)
@@ -2648,10 +2648,10 @@ static int make_raw_rw_request(void)
max_sector = _floppy->sect * _floppy->head;
- TRACK = (int)current_req->sector / max_sector;
- fsector_t = (int)current_req->sector % max_sector;
+ TRACK = (int)blk_rq_pos(current_req) / max_sector;
+ fsector_t = (int)blk_rq_pos(current_req) % max_sector;
if (_floppy->track && TRACK >= _floppy->track) {
- if (current_req->current_nr_sectors & 1) {
+ if (blk_rq_cur_sectors(current_req) & 1) {
current_count_sectors = 1;
return 1;
} else
@@ -2669,7 +2669,7 @@ static int make_raw_rw_request(void)
if (fsector_t >= max_sector) {
current_count_sectors =
min_t(int, _floppy->sect - fsector_t,
- current_req->nr_sectors);
+ blk_rq_sectors(current_req));
return 1;
}
SIZECODE = 2;
@@ -2720,7 +2720,7 @@ static int make_raw_rw_request(void)
in_sector_offset = (fsector_t % _floppy->sect) % ssize;
aligned_sector_t = fsector_t - in_sector_offset;
- max_size = current_req->nr_sectors;
+ max_size = blk_rq_sectors(current_req);
if ((raw_cmd->track == buffer_track) &&
(current_drive == buffer_drive) &&
(fsector_t >= buffer_min) && (fsector_t < buffer_max)) {
@@ -2729,10 +2729,10 @@ static int make_raw_rw_request(void)
copy_buffer(1, max_sector, buffer_max);
return 1;
}
- } else if (in_sector_offset || current_req->nr_sectors < ssize) {
+ } else if (in_sector_offset || blk_rq_sectors(current_req) < ssize) {
if (CT(COMMAND) == FD_WRITE) {
- if (fsector_t + current_req->nr_sectors > ssize &&
- fsector_t + current_req->nr_sectors < ssize + ssize)
+ if (fsector_t + blk_rq_sectors(current_req) > ssize &&
+ fsector_t + blk_rq_sectors(current_req) < ssize + ssize)
max_size = ssize + ssize;
else
max_size = ssize;
@@ -2776,7 +2776,7 @@ static int make_raw_rw_request(void)
(indirect * 2 > direct * 3 &&
*errors < DP->max_errors.read_track && ((!probing
|| (DP->read_track & (1 << DRS->probed_format)))))) {
- max_size = current_req->nr_sectors;
+ max_size = blk_rq_sectors(current_req);
} else {
raw_cmd->kernel_data = current_req->buffer;
raw_cmd->length = current_count_sectors << 9;
@@ -2801,7 +2801,7 @@ static int make_raw_rw_request(void)
fsector_t > buffer_max ||
fsector_t < buffer_min ||
((CT(COMMAND) == FD_READ ||
- (!in_sector_offset && current_req->nr_sectors >= ssize)) &&
+ (!in_sector_offset && blk_rq_sectors(current_req) >= ssize)) &&
max_sector > 2 * max_buffer_sectors + buffer_min &&
max_size + fsector_t > 2 * max_buffer_sectors + buffer_min)
/* not enough space */
@@ -2879,8 +2879,8 @@ static int make_raw_rw_request(void)
printk("write\n");
return 0;
}
- } else if (raw_cmd->length > current_req->nr_sectors << 9 ||
- current_count_sectors > current_req->nr_sectors) {
+ } else if (raw_cmd->length > blk_rq_sectors(current_req) << 9 ||
+ current_count_sectors > blk_rq_sectors(current_req)) {
DPRINT("buffer overrun in direct transfer\n");
return 0;
} else if (raw_cmd->length < current_count_sectors << 9) {
@@ -2990,8 +2990,9 @@ static void do_fd_request(struct request_queue * q)
if (usage_count == 0) {
printk("warning: usage count=0, current_req=%p exiting\n",
current_req);
- printk("sect=%ld type=%x flags=%x\n", (long)current_req->sector,
- current_req->cmd_type, current_req->cmd_flags);
+ printk("sect=%ld type=%x flags=%x\n",
+ (long)blk_rq_pos(current_req), current_req->cmd_type,
+ current_req->cmd_flags);
return;
}
if (test_bit(0, &fdc_busy)) {
diff --git a/drivers/block/hd.c b/drivers/block/hd.c
index 75b9ca9..a3b3994 100644
--- a/drivers/block/hd.c
+++ b/drivers/block/hd.c
@@ -228,7 +228,7 @@ static void dump_status(const char *msg, unsigned int stat)
printk(", CHS=%d/%d/%d", (inb(HD_HCYL)<<8) + inb(HD_LCYL),
inb(HD_CURRENT) & 0xf, inb(HD_SECTOR));
if (CURRENT)
- printk(", sector=%ld", CURRENT->sector);
+ printk(", sector=%ld", blk_rq_pos(CURRENT));
}
printk("\n");
}
@@ -457,9 +457,9 @@ ok_to_read:
req = CURRENT;
insw(HD_DATA, req->buffer, 256);
#ifdef DEBUG
- printk("%s: read: sector %ld, remaining = %ld, buffer=%p\n",
- req->rq_disk->disk_name, req->sector + 1, req->nr_sectors - 1,
- req->buffer+512);
+ printk("%s: read: sector %ld, remaining = %u, buffer=%p\n",
+ req->rq_disk->disk_name, blk_rq_pos(req) + 1,
+ blk_rq_sectors(req) - 1, req->buffer+512);
#endif
if (__blk_end_request(req, 0, 512)) {
SET_HANDLER(&read_intr);
@@ -485,7 +485,7 @@ static void write_intr(void)
continue;
if (!OK_STATUS(i))
break;
- if ((req->nr_sectors <= 1) || (i & DRQ_STAT))
+ if ((blk_rq_sectors(req) <= 1) || (i & DRQ_STAT))
goto ok_to_write;
} while (--retries > 0);
dump_status("write_intr", i);
@@ -589,8 +589,8 @@ repeat:
return;
}
disk = req->rq_disk->private_data;
- block = req->sector;
- nsect = req->nr_sectors;
+ block = blk_rq_pos(req);
+ nsect = blk_rq_sectors(req);
if (block >= get_capacity(req->rq_disk) ||
((block+nsect) > get_capacity(req->rq_disk))) {
printk("%s: bad access: block=%d, count=%d\n",
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index a9ab8be..977a573 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -110,7 +110,7 @@ static void nbd_end_request(struct request *req)
req, error ? "failed" : "done");
spin_lock_irqsave(q->queue_lock, flags);
- __blk_end_request(req, error, req->nr_sectors << 9);
+ __blk_end_request(req, error, blk_rq_sectors(req) << 9);
spin_unlock_irqrestore(q->queue_lock, flags);
}
@@ -231,19 +231,19 @@ static int nbd_send_req(struct nbd_device *lo, struct request *req)
{
int result, flags;
struct nbd_request request;
- unsigned long size = req->nr_sectors << 9;
+ unsigned long size = blk_rq_sectors(req) << 9;
request.magic = htonl(NBD_REQUEST_MAGIC);
request.type = htonl(nbd_cmd(req));
- request.from = cpu_to_be64((u64) req->sector << 9);
+ request.from = cpu_to_be64((u64)blk_rq_pos(req) << 9);
request.len = htonl(size);
memcpy(request.handle, &req, sizeof(req));
- dprintk(DBG_TX, "%s: request %p: sending control (%s@%llu,%luB)\n",
+ dprintk(DBG_TX, "%s: request %p: sending control (%s@%llu,%uB)\n",
lo->disk->disk_name, req,
nbdcmd_to_ascii(nbd_cmd(req)),
- (unsigned long long)req->sector << 9,
- req->nr_sectors << 9);
+ (unsigned long long)blk_rq_pos(req) << 9,
+ blk_rq_sectors(req) << 9);
result = sock_xmit(lo, 1, &request, sizeof(request),
(nbd_cmd(req) == NBD_CMD_WRITE) ? MSG_MORE : 0);
if (result <= 0) {
diff --git a/drivers/block/paride/pcd.c b/drivers/block/paride/pcd.c
index 9fd57c2..2d5dc0a 100644
--- a/drivers/block/paride/pcd.c
+++ b/drivers/block/paride/pcd.c
@@ -728,8 +728,8 @@ static void do_pcd_request(struct request_queue * q)
if (cd != pcd_current)
pcd_bufblk = -1;
pcd_current = cd;
- pcd_sector = pcd_req->sector;
- pcd_count = pcd_req->current_nr_sectors;
+ pcd_sector = blk_rq_pos(pcd_req);
+ pcd_count = blk_rq_cur_sectors(pcd_req);
pcd_buf = pcd_req->buffer;
pcd_busy = 1;
ps_set_intr(do_pcd_read, NULL, 0, nice);
diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c
index 0732df4..9ec5d4a 100644
--- a/drivers/block/paride/pd.c
+++ b/drivers/block/paride/pd.c
@@ -444,11 +444,11 @@ static enum action do_pd_io_start(void)
pd_cmd = rq_data_dir(pd_req);
if (pd_cmd == READ || pd_cmd == WRITE) {
- pd_block = pd_req->sector;
- pd_count = pd_req->current_nr_sectors;
+ pd_block = blk_rq_pos(pd_req);
+ pd_count = blk_rq_cur_sectors(pd_req);
if (pd_block + pd_count > get_capacity(pd_req->rq_disk))
return Fail;
- pd_run = pd_req->nr_sectors;
+ pd_run = blk_rq_sectors(pd_req);
pd_buf = pd_req->buffer;
pd_retries = 0;
if (pd_cmd == READ)
@@ -479,7 +479,7 @@ static int pd_next_buf(void)
return 0;
spin_lock_irqsave(&pd_lock, saved_flags);
__blk_end_request_cur(pd_req, 0);
- pd_count = pd_req->current_nr_sectors;
+ pd_count = blk_rq_cur_sectors(pd_req);
pd_buf = pd_req->buffer;
spin_unlock_irqrestore(&pd_lock, saved_flags);
return 0;
diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c
index 3871e35..e88c889 100644
--- a/drivers/block/paride/pf.c
+++ b/drivers/block/paride/pf.c
@@ -768,9 +768,9 @@ repeat:
return;
pf_current = pf_req->rq_disk->private_data;
- pf_block = pf_req->sector;
- pf_run = pf_req->nr_sectors;
- pf_count = pf_req->current_nr_sectors;
+ pf_block = blk_rq_pos(pf_req);
+ pf_run = blk_rq_sectors(pf_req);
+ pf_count = blk_rq_cur_sectors(pf_req);
if (pf_block + pf_count > get_capacity(pf_req->rq_disk)) {
pf_end_request(-EIO);
@@ -810,7 +810,7 @@ static int pf_next_buf(void)
spin_unlock_irqrestore(&pf_spin_lock, saved_flags);
if (!pf_req)
return 1;
- pf_count = pf_req->current_nr_sectors;
+ pf_count = blk_rq_cur_sectors(pf_req);
pf_buf = pf_req->buffer;
}
return 0;
diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c
index c238867..8d58308 100644
--- a/drivers/block/ps3disk.c
+++ b/drivers/block/ps3disk.c
@@ -134,13 +134,12 @@ static int ps3disk_submit_request_sg(struct ps3_storage_device *dev,
rq_for_each_segment(bv, req, iter)
n++;
dev_dbg(&dev->sbd.core,
- "%s:%u: %s req has %u bvecs for %lu sectors %lu hard sectors\n",
- __func__, __LINE__, op, n, req->nr_sectors,
- blk_rq_sectors(req));
+ "%s:%u: %s req has %u bvecs for %u sectors\n",
+ __func__, __LINE__, op, n, blk_rq_sectors(req));
#endif
- start_sector = req->sector * priv->blocking_factor;
- sectors = req->nr_sectors * priv->blocking_factor;
+ start_sector = blk_rq_pos(req) * priv->blocking_factor;
+ sectors = blk_rq_sectors(req) * priv->blocking_factor;
dev_dbg(&dev->sbd.core, "%s:%u: %s %llu sectors starting at %llu\n",
__func__, __LINE__, op, sectors, start_sector);
diff --git a/drivers/block/sunvdc.c b/drivers/block/sunvdc.c
index f59887c..9f351bf 100644
--- a/drivers/block/sunvdc.c
+++ b/drivers/block/sunvdc.c
@@ -416,7 +416,7 @@ static int __send_request(struct request *req)
desc->slice = 0;
}
desc->status = ~0;
- desc->offset = (req->sector << 9) / port->vdisk_block_size;
+ desc->offset = (blk_rq_pos(req) << 9) / port->vdisk_block_size;
desc->size = len;
desc->ncookies = err;
diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index 4248559..c1b9a4d 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -312,14 +312,14 @@ static void start_request(struct floppy_state *fs)
}
while (fs->state == idle && (req = elv_next_request(swim3_queue))) {
#if 0
- printk("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%ld buf=%p\n",
+ printk("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%u buf=%p\n",
req->rq_disk->disk_name, req->cmd,
- (long)req->sector, req->nr_sectors, req->buffer);
- printk(" errors=%d current_nr_sectors=%ld\n",
- req->errors, req->current_nr_sectors);
+ (long)blk_rq_pos(req), blk_rq_sectors(req), req->buffer);
+ printk(" errors=%d current_nr_sectors=%u\n",
+ req->errors, blk_rq_cur_sectors(req));
#endif
- if (req->sector >= fs->total_secs) {
+ if (blk_rq_pos(req) >= fs->total_secs) {
__blk_end_request_cur(req, -EIO);
continue;
}
@@ -337,13 +337,14 @@ static void start_request(struct floppy_state *fs)
}
}
- /* Do not remove the cast. req->sector is now a sector_t and
- * can be 64 bits, but it will never go past 32 bits for this
- * driver anyway, so we can safely cast it down and not have
- * to do a 64/32 division
+ /* Do not remove the cast. blk_rq_pos(req) is now a
+ * sector_t and can be 64 bits, but it will never go
+ * past 32 bits for this driver anyway, so we can
+ * safely cast it down and not have to do a 64/32
+ * division
*/
- fs->req_cyl = ((long)req->sector) / fs->secpercyl;
- x = ((long)req->sector) % fs->secpercyl;
+ fs->req_cyl = ((long)blk_rq_pos(req)) / fs->secpercyl;
+ x = ((long)blk_rq_pos(req)) % fs->secpercyl;
fs->head = x / fs->secpertrack;
fs->req_sector = x % fs->secpertrack + 1;
fd_req = req;
@@ -420,7 +421,7 @@ static inline void setup_transfer(struct floppy_state *fs)
struct dbdma_cmd *cp = fs->dma_cmd;
struct dbdma_regs __iomem *dr = fs->dma;
- if (fd_req->current_nr_sectors <= 0) {
+ if (blk_rq_cur_sectors(fd_req) <= 0) {
printk(KERN_ERR "swim3: transfer 0 sectors?\n");
return;
}
@@ -428,8 +429,8 @@ static inline void setup_transfer(struct floppy_state *fs)
n = 1;
else {
n = fs->secpertrack - fs->req_sector + 1;
- if (n > fd_req->current_nr_sectors)
- n = fd_req->current_nr_sectors;
+ if (n > blk_rq_cur_sectors(fd_req))
+ n = blk_rq_cur_sectors(fd_req);
}
fs->scount = n;
swim3_select(fs, fs->head? READ_DATA_1: READ_DATA_0);
@@ -600,7 +601,8 @@ static void xfer_timeout(unsigned long data)
out_8(&sw->control_bic, WRITE_SECTORS | DO_ACTION);
out_8(&sw->select, RELAX);
printk(KERN_ERR "swim3: timeout %sing sector %ld\n",
- (rq_data_dir(fd_req)==WRITE? "writ": "read"), (long)fd_req->sector);
+ (rq_data_dir(fd_req)==WRITE? "writ": "read"),
+ (long)blk_rq_pos(fd_req));
__blk_end_request_cur(fd_req, -EIO);
fs->state = idle;
start_request(fs);
@@ -714,7 +716,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id)
} else {
printk("swim3: error %sing block %ld (err=%x)\n",
rq_data_dir(fd_req) == WRITE? "writ": "read",
- (long)fd_req->sector, err);
+ (long)blk_rq_pos(fd_req), err);
__blk_end_request_cur(fd_req, -EIO);
fs->state = idle;
}
diff --git a/drivers/block/sx8.c b/drivers/block/sx8.c
index 60e85bb..087c94c 100644
--- a/drivers/block/sx8.c
+++ b/drivers/block/sx8.c
@@ -903,10 +903,10 @@ queue_one_request:
msg->sg_count = n_elem;
msg->sg_type = SGT_32BIT;
msg->handle = cpu_to_le32(TAG_ENCODE(crq->tag));
- msg->lba = cpu_to_le32(rq->sector & 0xffffffff);
- tmp = (rq->sector >> 16) >> 16;
+ msg->lba = cpu_to_le32(blk_rq_pos(rq) & 0xffffffff);
+ tmp = (blk_rq_pos(rq) >> 16) >> 16;
msg->lba_high = cpu_to_le16( (u16) tmp );
- msg->lba_count = cpu_to_le16(rq->nr_sectors);
+ msg->lba_count = cpu_to_le16(blk_rq_sectors(rq));
msg_size = sizeof(struct carm_msg_rw) - sizeof(msg->sg);
for (i = 0; i < n_elem; i++) {
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index 8c2cc71..dc3b899 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -726,8 +726,8 @@ static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
* The call to blk_queue_hardsect_size() guarantees that request
* is aligned, but it is given in terms of 512 byte units, always.
*/
- block = rq->sector >> lun->capacity.bshift;
- nblks = rq->nr_sectors >> lun->capacity.bshift;
+ block = blk_rq_pos(rq) >> lun->capacity.bshift;
+ nblks = blk_rq_sectors(rq) >> lun->capacity.bshift;
cmd->cdb[0] = (cmd->dir == UB_DIR_READ)? READ_10: WRITE_10;
/* 10-byte uses 4 bytes of LBA: 2147483648KB, 2097152MB, 2048GB */
@@ -739,7 +739,7 @@ static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
cmd->cdb[8] = nblks;
cmd->cdb_len = 10;
- cmd->len = rq->nr_sectors * 512;
+ cmd->len = blk_rq_sectors(rq) * 512;
}
static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c
index e821eed..2086cb1 100644
--- a/drivers/block/viodasd.c
+++ b/drivers/block/viodasd.c
@@ -252,7 +252,7 @@ static int send_request(struct request *req)
struct viodasd_device *d;
unsigned long flags;
- start = (u64)req->sector << 9;
+ start = (u64)blk_rq_pos(req) << 9;
if (rq_data_dir(req) == READ) {
direction = DMA_FROM_DEVICE;
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 50745e6..1980ab4 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -85,7 +85,7 @@ static bool do_req(struct request_queue *q, struct virtio_blk *vblk,
vbr->req = req;
if (blk_fs_request(vbr->req)) {
vbr->out_hdr.type = 0;
- vbr->out_hdr.sector = vbr->req->sector;
+ vbr->out_hdr.sector = blk_rq_pos(vbr->req);
vbr->out_hdr.ioprio = req_get_ioprio(vbr->req);
} else if (blk_pc_request(vbr->req)) {
vbr->out_hdr.type = VIRTIO_BLK_T_SCSI_CMD;
diff --git a/drivers/block/xd.c b/drivers/block/xd.c
index 14be4c1..4ef8801 100644
--- a/drivers/block/xd.c
+++ b/drivers/block/xd.c
@@ -306,8 +306,8 @@ static void do_xd_request (struct request_queue * q)
return;
while ((req = elv_next_request(q)) != NULL) {
- unsigned block = req->sector;
- unsigned count = req->nr_sectors;
+ unsigned block = blk_rq_pos(req);
+ unsigned count = blk_rq_sectors(req);
XD_INFO *disk = req->rq_disk->private_data;
int res = 0;
int retry;
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index b456447..91fc565 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -231,7 +231,7 @@ static int blkif_queue_request(struct request *req)
info->shadow[id].request = (unsigned long)req;
ring_req->id = id;
- ring_req->sector_number = (blkif_sector_t)req->sector;
+ ring_req->sector_number = (blkif_sector_t)blk_rq_pos(req);
ring_req->handle = info->handle;
ring_req->operation = rq_data_dir(req) ?
@@ -310,11 +310,10 @@ static void do_blkif_request(struct request_queue *rq)
goto wait;
pr_debug("do_blk_req %p: cmd %p, sec %lx, "
- "(%u/%li) buffer:%p [%s]\n",
- req, req->cmd, (unsigned long)req->sector,
- req->current_nr_sectors,
- req->nr_sectors, req->buffer,
- rq_data_dir(req) ? "write" : "read");
+ "(%u/%u) buffer:%p [%s]\n",
+ req, req->cmd, (unsigned long)blk_rq_pos(req),
+ blk_rq_cur_sectors(req), blk_rq_sectors(req),
+ req->buffer, rq_data_dir(req) ? "write" : "read");
blkdev_dequeue_request(req);
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 5722931..97c99b4 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -646,13 +646,14 @@ static void ace_fsm_dostate(struct ace_device *ace)
/* Okay, it's a data request, set it up for transfer */
dev_dbg(ace->dev,
"request: sec=%llx hcnt=%x, ccnt=%x, dir=%i\n",
- (unsigned long long) req->sector, blk_rq_sectors(req),
- req->current_nr_sectors, rq_data_dir(req));
+ (unsigned long long)blk_rq_pos(req),
+ blk_rq_sectors(req), blk_rq_cur_sectors(req),
+ rq_data_dir(req));
ace->req = req;
ace->data_ptr = req->buffer;
- ace->data_count = req->current_nr_sectors * ACE_BUF_PER_SECTOR;
- ace_out32(ace, ACE_MPULBA, req->sector & 0x0FFFFFFF);
+ ace->data_count = blk_rq_cur_sectors(req) * ACE_BUF_PER_SECTOR;
+ ace_out32(ace, ACE_MPULBA, blk_rq_pos(req) & 0x0FFFFFFF);
count = blk_rq_sectors(req);
if (rq_data_dir(req)) {
@@ -688,7 +689,7 @@ static void ace_fsm_dostate(struct ace_device *ace)
dev_dbg(ace->dev,
"CFBSY set; t=%i iter=%i c=%i dc=%i irq=%i\n",
ace->fsm_task, ace->fsm_iter_num,
- ace->req->current_nr_sectors * 16,
+ blk_rq_cur_sectors(ace->req) * 16,
ace->data_count, ace->in_irq);
ace_fsm_yield(ace); /* need to poll CFBSY bit */
break;
@@ -697,7 +698,7 @@ static void ace_fsm_dostate(struct ace_device *ace)
dev_dbg(ace->dev,
"DATABUF not set; t=%i iter=%i c=%i dc=%i irq=%i\n",
ace->fsm_task, ace->fsm_iter_num,
- ace->req->current_nr_sectors * 16,
+ blk_rq_cur_sectors(ace->req) * 16,
ace->data_count, ace->in_irq);
ace_fsm_yieldirq(ace);
break;
@@ -721,10 +722,10 @@ static void ace_fsm_dostate(struct ace_device *ace)
blk_rq_cur_bytes(ace->req))) {
/* dev_dbg(ace->dev, "next block; h=%u c=%u\n",
* blk_rq_sectors(ace->req),
- * ace->req->current_nr_sectors);
+ * blk_rq_cur_sectors(ace->req));
*/
ace->data_ptr = ace->req->buffer;
- ace->data_count = ace->req->current_nr_sectors * 16;
+ ace->data_count = blk_rq_cur_sectors(ace->req) * 16;
ace_fsm_yieldirq(ace);
break;
}
diff --git a/drivers/block/z2ram.c b/drivers/block/z2ram.c
index b66ad58..d4e6b71 100644
--- a/drivers/block/z2ram.c
+++ b/drivers/block/z2ram.c
@@ -71,12 +71,12 @@ static void do_z2_request(struct request_queue *q)
{
struct request *req;
while ((req = elv_next_request(q)) != NULL) {
- unsigned long start = req->sector << 9;
- unsigned long len = req->current_nr_sectors << 9;
+ unsigned long start = blk_rq_pos(req) << 9;
+ unsigned long len = blk_rq_cur_sectors(req) << 9;
if (start + len > z2ram_size) {
printk( KERN_ERR DEVICE_NAME ": bad access: block=%lu, count=%u\n",
- req->sector, req->current_nr_sectors);
+ blk_rq_pos(req), blk_rq_cur_sectors(req));
__blk_end_request_cur(req, -EIO);
continue;
}
diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
index cab2b1f..488423c 100644
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -584,8 +584,8 @@ static void gdrom_readdisk_dma(struct work_struct *work)
list_for_each_safe(elem, next, &gdrom_deferred) {
req = list_entry(elem, struct request, queuelist);
spin_unlock(&gdrom_lock);
- block = req->sector/GD_TO_BLK + GD_SESSION_OFFSET;
- block_cnt = req->nr_sectors/GD_TO_BLK;
+ block = blk_rq_pos(req)/GD_TO_BLK + GD_SESSION_OFFSET;
+ block_cnt = blk_rq_sectors(req)/GD_TO_BLK;
ctrl_outl(PHYSADDR(req->buffer), GDROM_DMA_STARTADDR_REG);
ctrl_outl(block_cnt * GDROM_HARD_SECTOR, GDROM_DMA_LENGTH_REG);
ctrl_outl(1, GDROM_DMA_DIRECTION_REG);
@@ -661,7 +661,7 @@ static void gdrom_request(struct request_queue *rq)
printk(" write request ignored\n");
__blk_end_request_cur(req, -EIO);
}
- if (req->nr_sectors)
+ if (blk_rq_sectors(req))
gdrom_request_handler_dma(req);
else
__blk_end_request_cur(req, -EIO);
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index cc3efa0..6e190a9 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -282,7 +282,7 @@ static int send_request(struct request *req)
viopath_targetinst(viopath_hostLp),
(u64)req, VIOVERSION << 16,
((u64)DEVICE_NR(diskinfo) << 48) | dmaaddr,
- (u64)req->sector * 512, len, 0);
+ (u64)blk_rq_pos(req) * 512, len, 0);
if (hvrc != HvLpEvent_Rc_Good) {
printk(VIOCD_KERN_WARNING "hv error on op %d\n", (int)hvrc);
return -1;
diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c
index a416346..9e600d2 100644
--- a/drivers/memstick/core/mspro_block.c
+++ b/drivers/memstick/core/mspro_block.c
@@ -677,10 +677,10 @@ try_again:
continue;
}
- t_sec = msb->block_req->sector << 9;
+ t_sec = blk_rq_pos(msb->block_req) << 9;
sector_div(t_sec, msb->page_size);
- count = msb->block_req->nr_sectors << 9;
+ count = blk_rq_sectors(msb->block_req) << 9;
count /= msb->page_size;
param.system = msb->system;
@@ -745,7 +745,7 @@ static int mspro_block_complete_req(struct memstick_dev *card, int error)
t_len *= msb->page_size;
}
} else
- t_len = msb->block_req->nr_sectors << 9;
+ t_len = blk_rq_sectors(msb->block_req) << 9;
dev_dbg(&card->dev, "transferred %x (%d)\n", t_len, error);
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index 56e60f0..510eb47 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -761,7 +761,7 @@ static int i2o_block_transfer(struct request *req)
break;
case CACHE_SMARTFETCH:
- if (req->nr_sectors > 16)
+ if (blk_rq_sectors(req) > 16)
ctl_flags = 0x201F0008;
else
ctl_flags = 0x001F0000;
@@ -781,13 +781,13 @@ static int i2o_block_transfer(struct request *req)
ctl_flags = 0x001F0010;
break;
case CACHE_SMARTBACK:
- if (req->nr_sectors > 16)
+ if (blk_rq_sectors(req) > 16)
ctl_flags = 0x001F0004;
else
ctl_flags = 0x001F0010;
break;
case CACHE_SMARTTHROUGH:
- if (req->nr_sectors > 16)
+ if (blk_rq_sectors(req) > 16)
ctl_flags = 0x001F0004;
else
ctl_flags = 0x001F0010;
@@ -827,22 +827,24 @@ static int i2o_block_transfer(struct request *req)
*mptr++ = cpu_to_le32(scsi_flags);
- *((u32 *) & cmd[2]) = cpu_to_be32(req->sector * hwsec);
- *((u16 *) & cmd[7]) = cpu_to_be16(req->nr_sectors * hwsec);
+ *((u32 *) & cmd[2]) = cpu_to_be32(blk_rq_pos(req) * hwsec);
+ *((u16 *) & cmd[7]) = cpu_to_be16(blk_rq_sectors(req) * hwsec);
memcpy(mptr, cmd, 10);
mptr += 4;
- *mptr++ = cpu_to_le32(req->nr_sectors << KERNEL_SECTOR_SHIFT);
+ *mptr++ =
+ cpu_to_le32(blk_rq_sectors(req) << KERNEL_SECTOR_SHIFT);
} else
#endif
{
msg->u.head[1] = cpu_to_le32(cmd | HOST_TID << 12 | tid);
*mptr++ = cpu_to_le32(ctl_flags);
- *mptr++ = cpu_to_le32(req->nr_sectors << KERNEL_SECTOR_SHIFT);
*mptr++ =
- cpu_to_le32((u32) (req->sector << KERNEL_SECTOR_SHIFT));
+ cpu_to_le32(blk_rq_sectors(req) << KERNEL_SECTOR_SHIFT);
+ *mptr++ =
+ cpu_to_le32((u32) (blk_rq_pos(req) << KERNEL_SECTOR_SHIFT));
*mptr++ =
- cpu_to_le32(req->sector >> (32 - KERNEL_SECTOR_SHIFT));
+ cpu_to_le32(blk_rq_pos(req) >> (32 - KERNEL_SECTOR_SHIFT));
}
if (!i2o_block_sglist_alloc(c, ireq, &mptr)) {
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index fe8041e..949e997 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -243,7 +243,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
brq.mrq.cmd = &brq.cmd;
brq.mrq.data = &brq.data;
- brq.cmd.arg = req->sector;
+ brq.cmd.arg = blk_rq_pos(req);
if (!mmc_card_blockaddr(card))
brq.cmd.arg <<= 9;
brq.cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
@@ -251,7 +251,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
brq.stop.opcode = MMC_STOP_TRANSMISSION;
brq.stop.arg = 0;
brq.stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
- brq.data.blocks = req->nr_sectors;
+ brq.data.blocks = blk_rq_sectors(req);
/*
* After a read error, we redo the request one sector at a time
@@ -293,7 +293,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
* Adjust the sg list so it is the same size as the
* request.
*/
- if (brq.data.blocks != req->nr_sectors) {
+ if (brq.data.blocks != blk_rq_sectors(req)) {
int i, data_size = brq.data.blocks << 9;
struct scatterlist *sg;
@@ -344,8 +344,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
printk(KERN_ERR "%s: error %d transferring data,"
" sector %u, nr %u, card status %#x\n",
req->rq_disk->disk_name, brq.data.error,
- (unsigned)req->sector,
- (unsigned)req->nr_sectors, status);
+ (unsigned)blk_rq_pos(req),
+ (unsigned)blk_rq_sectors(req), status);
}
if (brq.stop.error) {
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 76c4c8d..4ea2e67 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -47,8 +47,8 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr,
unsigned long block, nsect;
char *buf;
- block = req->sector << 9 >> tr->blkshift;
- nsect = req->current_nr_sectors << 9 >> tr->blkshift;
+ block = blk_rq_pos(req) << 9 >> tr->blkshift;
+ nsect = blk_rq_cur_sectors(req) << 9 >> tr->blkshift;
buf = req->buffer;
@@ -59,7 +59,8 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr,
if (!blk_fs_request(req))
return -EIO;
- if (req->sector + req->current_nr_sectors > get_capacity(req->rq_disk))
+ if (blk_rq_pos(req) + blk_rq_cur_sectors(req) >
+ get_capacity(req->rq_disk))
return -EIO;
switch(rq_data_dir(req)) {
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index fabec95..7df03c7 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -603,7 +603,7 @@ static void dasd_profile_end(struct dasd_block *block,
if (dasd_profile_level != DASD_PROFILE_ON)
return;
- sectors = req->nr_sectors;
+ sectors = blk_rq_sectors(req);
if (!cqr->buildclk || !cqr->startclk ||
!cqr->stopclk || !cqr->endclk ||
!sectors)
diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c
index b9a7f77..2efaddf 100644
--- a/drivers/s390/block/dasd_diag.c
+++ b/drivers/s390/block/dasd_diag.c
@@ -505,8 +505,9 @@ static struct dasd_ccw_req *dasd_diag_build_cp(struct dasd_device *memdev,
return ERR_PTR(-EINVAL);
blksize = block->bp_block;
/* Calculate record id of first and last block. */
- first_rec = req->sector >> block->s2b_shift;
- last_rec = (req->sector + req->nr_sectors - 1) >> block->s2b_shift;
+ first_rec = blk_rq_pos(req) >> block->s2b_shift;
+ last_rec =
+ (blk_rq_pos(req) + blk_rq_sectors(req) - 1) >> block->s2b_shift;
/* Check struct bio and count the number of blocks for the request. */
count = 0;
rq_for_each_segment(bv, req, iter) {
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index cb52da0..a41c940 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -2354,10 +2354,10 @@ static struct dasd_ccw_req *dasd_eckd_build_cp(struct dasd_device *startdev,
blksize = block->bp_block;
blk_per_trk = recs_per_track(&private->rdc_data, 0, blksize);
/* Calculate record id of first and last block. */
- first_rec = first_trk = req->sector >> block->s2b_shift;
+ first_rec = first_trk = blk_rq_pos(req) >> block->s2b_shift;
first_offs = sector_div(first_trk, blk_per_trk);
last_rec = last_trk =
- (req->sector + req->nr_sectors - 1) >> block->s2b_shift;
+ (blk_rq_pos(req) + blk_rq_sectors(req) - 1) >> block->s2b_shift;
last_offs = sector_div(last_trk, blk_per_trk);
cdlspecial = (private->uses_cdl && first_rec < 2*blk_per_trk);
@@ -2420,7 +2420,7 @@ dasd_eckd_free_cp(struct dasd_ccw_req *cqr, struct request *req)
private = (struct dasd_eckd_private *) cqr->block->base->private;
blksize = cqr->block->bp_block;
blk_per_trk = recs_per_track(&private->rdc_data, 0, blksize);
- recid = req->sector >> cqr->block->s2b_shift;
+ recid = blk_rq_pos(req) >> cqr->block->s2b_shift;
ccw = cqr->cpaddr;
/* Skip over define extent & locate record. */
ccw++;
diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c
index a3eb6fd..8912358 100644
--- a/drivers/s390/block/dasd_fba.c
+++ b/drivers/s390/block/dasd_fba.c
@@ -270,8 +270,9 @@ static struct dasd_ccw_req *dasd_fba_build_cp(struct dasd_device * memdev,
return ERR_PTR(-EINVAL);
blksize = block->bp_block;
/* Calculate record id of first and last block. */
- first_rec = req->sector >> block->s2b_shift;
- last_rec = (req->sector + req->nr_sectors - 1) >> block->s2b_shift;
+ first_rec = blk_rq_pos(req) >> block->s2b_shift;
+ last_rec =
+ (blk_rq_pos(req) + blk_rq_sectors(req) - 1) >> block->s2b_shift;
/* Check struct bio and count the number of blocks for the request. */
count = 0;
cidaw = 0;
@@ -309,7 +310,7 @@ static struct dasd_ccw_req *dasd_fba_build_cp(struct dasd_device * memdev,
ccw = cqr->cpaddr;
/* First ccw is define extent. */
define_extent(ccw++, cqr->data, rq_data_dir(req),
- block->bp_block, req->sector, req->nr_sectors);
+ block->bp_block, blk_rq_pos(req), blk_rq_sectors(req));
/* Build locate_record + read/write ccws. */
idaws = (unsigned long *) (cqr->data + sizeof(struct DE_fba_data));
LO_data = (struct LO_fba_data *) (idaws + cidaw);
diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c
index 5f8e8ef..2d00a38 100644
--- a/drivers/s390/char/tape_34xx.c
+++ b/drivers/s390/char/tape_34xx.c
@@ -1134,7 +1134,7 @@ tape_34xx_bread(struct tape_device *device, struct request *req)
/* Setup ccws. */
request->op = TO_BLOCK;
start_block = (struct tape_34xx_block_id *) request->cpdata;
- start_block->block = req->sector >> TAPEBLOCK_HSEC_S2B;
+ start_block->block = blk_rq_pos(req) >> TAPEBLOCK_HSEC_S2B;
DBF_EVENT(6, "start_block = %i\n", start_block->block);
ccw = request->cpaddr;
diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c
index 823b05b..c453b2f 100644
--- a/drivers/s390/char/tape_3590.c
+++ b/drivers/s390/char/tape_3590.c
@@ -633,7 +633,7 @@ tape_3590_bread(struct tape_device *device, struct request *req)
struct req_iterator iter;
DBF_EVENT(6, "xBREDid:");
- start_block = req->sector >> TAPEBLOCK_HSEC_S2B;
+ start_block = blk_rq_pos(req) >> TAPEBLOCK_HSEC_S2B;
DBF_EVENT(6, "start_block = %i\n", start_block);
rq_for_each_segment(bv, req, iter)
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
index 86596d3..5d035e4 100644
--- a/drivers/s390/char/tape_block.c
+++ b/drivers/s390/char/tape_block.c
@@ -87,7 +87,7 @@ __tapeblock_end_request(struct tape_request *ccw_req, void *data)
if (ccw_req->rc == 0)
/* Update position. */
device->blk_data.block_position =
- (req->sector + req->nr_sectors) >> TAPEBLOCK_HSEC_S2B;
+ (blk_rq_pos(req) + blk_rq_sectors(req)) >> TAPEBLOCK_HSEC_S2B;
else
/* We lost the position information due to an error. */
device->blk_data.block_position = -1;
diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c
index 0961788..2132c90 100644
--- a/drivers/sbus/char/jsflash.c
+++ b/drivers/sbus/char/jsflash.c
@@ -188,8 +188,8 @@ static void jsfd_do_request(struct request_queue *q)
while ((req = elv_next_request(q)) != NULL) {
struct jsfd_part *jdp = req->rq_disk->private_data;
- unsigned long offset = req->sector << 9;
- size_t len = req->current_nr_sectors << 9;
+ unsigned long offset = blk_rq_pos(req) << 9;
+ size_t len = blk_rq_cur_sectors(req) << 9;
if ((offset + len) > jdp->dsize) {
__blk_end_request_cur(req, -EIO);
diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
index be5099d..c7076ce 100644
--- a/drivers/scsi/eata.c
+++ b/drivers/scsi/eata.c
@@ -1825,7 +1825,7 @@ static int eata2x_queuecommand(struct scsi_cmnd *SCpnt,
if (linked_comm && SCpnt->device->queue_depth > 2
&& TLDEV(SCpnt->device->type)) {
ha->cp_stat[i] = READY;
- flush_dev(SCpnt->device, SCpnt->request->sector, ha, 0);
+ flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), ha, 0);
return 0;
}
@@ -2144,13 +2144,13 @@ static int reorder(struct hostdata *ha, unsigned long cursec,
if (!cpp->din)
input_only = 0;
- if (SCpnt->request->sector < minsec)
- minsec = SCpnt->request->sector;
- if (SCpnt->request->sector > maxsec)
- maxsec = SCpnt->request->sector;
+ if (blk_rq_pos(SCpnt->request) < minsec)
+ minsec = blk_rq_pos(SCpnt->request);
+ if (blk_rq_pos(SCpnt->request) > maxsec)
+ maxsec = blk_rq_pos(SCpnt->request);
- sl[n] = SCpnt->request->sector;
- ioseek += SCpnt->request->nr_sectors;
+ sl[n] = blk_rq_pos(SCpnt->request);
+ ioseek += blk_rq_sectors(SCpnt->request);
if (!n)
continue;
@@ -2190,7 +2190,7 @@ static int reorder(struct hostdata *ha, unsigned long cursec,
k = il[n];
cpp = &ha->cp[k];
SCpnt = cpp->SCpnt;
- ll[n] = SCpnt->request->nr_sectors;
+ ll[n] = blk_rq_sectors(SCpnt->request);
pl[n] = SCpnt->serial_number;
if (!n)
@@ -2236,12 +2236,12 @@ static int reorder(struct hostdata *ha, unsigned long cursec,
cpp = &ha->cp[k];
SCpnt = cpp->SCpnt;
scmd_printk(KERN_INFO, SCpnt,
- "%s pid %ld mb %d fc %d nr %d sec %ld ns %ld"
+ "%s pid %ld mb %d fc %d nr %d sec %ld ns %u"
" cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n",
(ihdlr ? "ihdlr" : "qcomm"),
SCpnt->serial_number, k, flushcount,
- n_ready, SCpnt->request->sector,
- SCpnt->request->nr_sectors, cursec, YESNO(s),
+ n_ready, blk_rq_pos(SCpnt->request),
+ blk_rq_sectors(SCpnt->request), cursec, YESNO(s),
YESNO(r), YESNO(rev), YESNO(input_only),
YESNO(overlap), cpp->din);
}
@@ -2408,7 +2408,7 @@ static irqreturn_t ihdlr(struct Scsi_Host *shost)
if (linked_comm && SCpnt->device->queue_depth > 2
&& TLDEV(SCpnt->device->type))
- flush_dev(SCpnt->device, SCpnt->request->sector, ha, 1);
+ flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), ha, 1);
tstatus = status_byte(spp->target_status);
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 36fd2e7..a8fab39 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1313,10 +1313,10 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd,
uint32_t bgstat = bgf->bgstat;
uint64_t failing_sector = 0;
- printk(KERN_ERR "BG ERROR in cmd 0x%x lba 0x%llx blk cnt 0x%lx "
+ printk(KERN_ERR "BG ERROR in cmd 0x%x lba 0x%llx blk cnt 0x%x "
"bgstat=0x%x bghm=0x%x\n",
cmd->cmnd[0], (unsigned long long)scsi_get_lba(cmd),
- cmd->request->nr_sectors, bgstat, bghm);
+ blk_rq_sectors(cmd->request), bgstat, bghm);
spin_lock(&_dump_buf_lock);
if (!_dump_buf_done) {
@@ -2375,15 +2375,15 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
if (cmnd->cmnd[0] == READ_10)
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
"9035 BLKGRD: READ @ sector %llu, "
- "count %lu\n",
- (unsigned long long)scsi_get_lba(cmnd),
- cmnd->request->nr_sectors);
+ "count %u\n",
+ (unsigned long long)scsi_get_lba(cmnd),
+ blk_rq_sectors(cmnd->request));
else if (cmnd->cmnd[0] == WRITE_10)
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
"9036 BLKGRD: WRITE @ sector %llu, "
- "count %lu cmd=%p\n",
+ "count %u cmd=%p\n",
(unsigned long long)scsi_get_lba(cmnd),
- cmnd->request->nr_sectors,
+ blk_rq_sectors(cmnd->request),
cmnd);
err = lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd);
@@ -2403,15 +2403,15 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
if (cmnd->cmnd[0] == READ_10)
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
"9040 dbg: READ @ sector %llu, "
- "count %lu\n",
+ "count %u\n",
(unsigned long long)scsi_get_lba(cmnd),
- cmnd->request->nr_sectors);
+ blk_rq_sectors(cmnd->request));
else if (cmnd->cmnd[0] == WRITE_10)
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
"9041 dbg: WRITE @ sector %llu, "
- "count %lu cmd=%p\n",
+ "count %u cmd=%p\n",
(unsigned long long)scsi_get_lba(cmnd),
- cmnd->request->nr_sectors, cmnd);
+ blk_rq_sectors(cmnd->request), cmnd);
else
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
"9042 dbg: parser not implemented\n");
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 9ff0ca9..39b3acf 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -787,9 +787,9 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
* Next deal with any sectors which we were able to correctly
* handle.
*/
- SCSI_LOG_HLCOMPLETE(1, printk("%ld sectors total, "
+ SCSI_LOG_HLCOMPLETE(1, printk("%u sectors total, "
"%d bytes done.\n",
- req->nr_sectors, good_bytes));
+ blk_rq_sectors(req), good_bytes));
/*
* Recovered errors need reporting, but they're always treated
@@ -968,7 +968,7 @@ static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb,
if (blk_pc_request(req))
sdb->length = req->data_len;
else
- sdb->length = req->nr_sectors << 9;
+ sdb->length = blk_rq_sectors(req) << 9;
return BLKPREP_OK;
}
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 3fcb64b..70c4dd9 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -383,9 +383,9 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
struct scsi_device *sdp = q->queuedata;
struct gendisk *disk = rq->rq_disk;
struct scsi_disk *sdkp;
- sector_t block = rq->sector;
+ sector_t block = blk_rq_pos(rq);
sector_t threshold;
- unsigned int this_count = rq->nr_sectors;
+ unsigned int this_count = blk_rq_sectors(rq);
int ret, host_dif;
if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
@@ -412,10 +412,10 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
this_count));
if (!sdp || !scsi_device_online(sdp) ||
- block + rq->nr_sectors > get_capacity(disk)) {
+ block + blk_rq_sectors(rq) > get_capacity(disk)) {
SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
- "Finishing %ld sectors\n",
- rq->nr_sectors));
+ "Finishing %u sectors\n",
+ blk_rq_sectors(rq)));
SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
"Retry with 0x%p\n", SCpnt));
goto out;
@@ -462,7 +462,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
* for this.
*/
if (sdp->sector_size == 1024) {
- if ((block & 1) || (rq->nr_sectors & 1)) {
+ if ((block & 1) || (blk_rq_sectors(rq) & 1)) {
scmd_printk(KERN_ERR, SCpnt,
"Bad block number requested\n");
goto out;
@@ -472,7 +472,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
}
}
if (sdp->sector_size == 2048) {
- if ((block & 3) || (rq->nr_sectors & 3)) {
+ if ((block & 3) || (blk_rq_sectors(rq) & 3)) {
scmd_printk(KERN_ERR, SCpnt,
"Bad block number requested\n");
goto out;
@@ -482,7 +482,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
}
}
if (sdp->sector_size == 4096) {
- if ((block & 7) || (rq->nr_sectors & 7)) {
+ if ((block & 7) || (blk_rq_sectors(rq) & 7)) {
scmd_printk(KERN_ERR, SCpnt,
"Bad block number requested\n");
goto out;
@@ -511,10 +511,10 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
}
SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
- "%s %d/%ld 512 byte blocks.\n",
+ "%s %d/%u 512 byte blocks.\n",
(rq_data_dir(rq) == WRITE) ?
"writing" : "reading", this_count,
- rq->nr_sectors));
+ blk_rq_sectors(rq)));
/* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */
host_dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
@@ -970,8 +970,8 @@ static struct block_device_operations sd_fops = {
static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
{
- u64 start_lba = scmd->request->sector;
- u64 end_lba = scmd->request->sector + (scsi_bufflen(scmd) / 512);
+ u64 start_lba = blk_rq_pos(scmd->request);
+ u64 end_lba = blk_rq_pos(scmd->request) + (scsi_bufflen(scmd) / 512);
u64 bad_lba;
int info_valid;
diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c
index 184dff4..82f14a9 100644
--- a/drivers/scsi/sd_dif.c
+++ b/drivers/scsi/sd_dif.c
@@ -507,7 +507,7 @@ void sd_dif_complete(struct scsi_cmnd *scmd, unsigned int good_bytes)
sector_sz = scmd->device->sector_size;
sectors = good_bytes / sector_sz;
- phys = scmd->request->sector & 0xffffffff;
+ phys = blk_rq_pos(scmd->request) & 0xffffffff;
if (sector_sz == 4096)
phys >>= 3;
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 0e1a0f2..fddba53 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -292,7 +292,8 @@ static int sr_done(struct scsi_cmnd *SCpnt)
if (cd->device->sector_size == 2048)
error_sector <<= 2;
error_sector &= ~(block_sectors - 1);
- good_bytes = (error_sector - SCpnt->request->sector) << 9;
+ good_bytes = (error_sector -
+ blk_rq_pos(SCpnt->request)) << 9;
if (good_bytes < 0 || good_bytes >= this_count)
good_bytes = 0;
/*
@@ -349,8 +350,8 @@ static int sr_prep_fn(struct request_queue *q, struct request *rq)
cd->disk->disk_name, block));
if (!cd->device || !scsi_device_online(cd->device)) {
- SCSI_LOG_HLQUEUE(2, printk("Finishing %ld sectors\n",
- rq->nr_sectors));
+ SCSI_LOG_HLQUEUE(2, printk("Finishing %u sectors\n",
+ blk_rq_sectors(rq)));
SCSI_LOG_HLQUEUE(2, printk("Retry with 0x%p\n", SCpnt));
goto out;
}
@@ -413,7 +414,7 @@ static int sr_prep_fn(struct request_queue *q, struct request *rq)
/*
* request doesn't start on hw block boundary, add scatter pads
*/
- if (((unsigned int)rq->sector % (s_size >> 9)) ||
+ if (((unsigned int)blk_rq_pos(rq) % (s_size >> 9)) ||
(scsi_bufflen(SCpnt) % s_size)) {
scmd_printk(KERN_NOTICE, SCpnt, "unaligned transfer\n");
goto out;
@@ -422,14 +423,14 @@ static int sr_prep_fn(struct request_queue *q, struct request *rq)
this_count = (scsi_bufflen(SCpnt) >> 9) / (s_size >> 9);
- SCSI_LOG_HLQUEUE(2, printk("%s : %s %d/%ld 512 byte blocks.\n",
+ SCSI_LOG_HLQUEUE(2, printk("%s : %s %d/%u 512 byte blocks.\n",
cd->cdi.name,
(rq_data_dir(rq) == WRITE) ?
"writing" : "reading",
- this_count, rq->nr_sectors));
+ this_count, blk_rq_sectors(rq)));
SCpnt->cmnd[1] = 0;
- block = (unsigned int)rq->sector / (s_size >> 9);
+ block = (unsigned int)blk_rq_pos(rq) / (s_size >> 9);
if (this_count > 0xffff) {
this_count = 0xffff;
diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c
index 601e951..54023d4 100644
--- a/drivers/scsi/u14-34f.c
+++ b/drivers/scsi/u14-34f.c
@@ -1306,7 +1306,7 @@ static int u14_34f_queuecommand(struct scsi_cmnd *SCpnt, void (*done)(struct scs
if (linked_comm && SCpnt->device->queue_depth > 2
&& TLDEV(SCpnt->device->type)) {
HD(j)->cp_stat[i] = READY;
- flush_dev(SCpnt->device, SCpnt->request->sector, j, FALSE);
+ flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), j, FALSE);
return 0;
}
@@ -1610,11 +1610,13 @@ static int reorder(unsigned int j, unsigned long cursec,
if (!(cpp->xdir == DTD_IN)) input_only = FALSE;
- if (SCpnt->request->sector < minsec) minsec = SCpnt->request->sector;
- if (SCpnt->request->sector > maxsec) maxsec = SCpnt->request->sector;
+ if (blk_rq_pos(SCpnt->request) < minsec)
+ minsec = blk_rq_pos(SCpnt->request);
+ if (blk_rq_pos(SCpnt->request) > maxsec)
+ maxsec = blk_rq_pos(SCpnt->request);
- sl[n] = SCpnt->request->sector;
- ioseek += SCpnt->request->nr_sectors;
+ sl[n] = blk_rq_pos(SCpnt->request);
+ ioseek += blk_rq_sectors(SCpnt->request);
if (!n) continue;
@@ -1642,7 +1644,7 @@ static int reorder(unsigned int j, unsigned long cursec,
if (!input_only) for (n = 0; n < n_ready; n++) {
k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
- ll[n] = SCpnt->request->nr_sectors; pl[n] = SCpnt->serial_number;
+ ll[n] = blk_rq_sectors(SCpnt->request); pl[n] = SCpnt->serial_number;
if (!n) continue;
@@ -1666,12 +1668,12 @@ static int reorder(unsigned int j, unsigned long cursec,
if (link_statistics && (overlap || !(flushcount % link_statistics)))
for (n = 0; n < n_ready; n++) {
k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
- printk("%s %d.%d:%d pid %ld mb %d fc %d nr %d sec %ld ns %ld"\
+ printk("%s %d.%d:%d pid %ld mb %d fc %d nr %d sec %ld ns %u"\
" cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n",
(ihdlr ? "ihdlr" : "qcomm"), SCpnt->channel, SCpnt->target,
SCpnt->lun, SCpnt->serial_number, k, flushcount, n_ready,
- SCpnt->request->sector, SCpnt->request->nr_sectors, cursec,
- YESNO(s), YESNO(r), YESNO(rev), YESNO(input_only),
+ blk_rq_pos(SCpnt->request), blk_rq_sectors(SCpnt->request),
+ cursec, YESNO(s), YESNO(r), YESNO(rev), YESNO(input_only),
YESNO(overlap), cpp->xdir);
}
#endif
@@ -1799,7 +1801,7 @@ static irqreturn_t ihdlr(unsigned int j)
if (linked_comm && SCpnt->device->queue_depth > 2
&& TLDEV(SCpnt->device->type))
- flush_dev(SCpnt->device, SCpnt->request->sector, j, TRUE);
+ flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), j, TRUE);
tstatus = status_byte(spp->target_status);
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index 43b50d3..3878d1d 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -270,7 +270,7 @@ static inline unsigned char scsi_get_prot_type(struct scsi_cmnd *scmd)
static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd)
{
- return scmd->request->sector;
+ return blk_rq_pos(scmd->request);
}
static inline unsigned scsi_prot_sg_count(struct scsi_cmnd *cmd)
--
1.6.0.2
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH 05/10] block: convert to pos and nr_sectors accessors
@ 2009-04-29 9:13 ` Tejun Heo
0 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 9:13 UTC (permalink / raw)
To: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, grant.likely, paul.clements,
jesper.juhl, tim, jeremy, adrian, oakad, dwmw2, schwidefsky,
ballabio_dario, davem, rusty, Markus.Lidel, bharrosh
Cc: Tejun Heo, Jeff Garzik
With recent cleanups, there is no place where low level driver
directly manipulates request fields. This means that the 'hard'
request fields always equal the !hard fields. Convert all
rq->sectors, nr_sectors and current_nr_sectors references to
accessors.
[ Impact: use pos and nr_sectors accessors ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Chirag Kantharia <chirag.kantharia@hp.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Jesper Juhl <jesper.juhl@gmail.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Dario Ballabio <ballabio_dario@emc.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
---
arch/um/drivers/ubd_kern.c | 2 +-
block/as-iosched.c | 18 ++++++-----
block/blk-barrier.c | 2 +-
block/blk-core.c | 17 +++++------
block/blk-merge.c | 10 +++---
block/cfq-iosched.c | 18 ++++++------
block/deadline-iosched.c | 2 +-
block/elevator.c | 22 +++++++-------
drivers/block/DAC960.c | 6 ++--
drivers/block/amiflop.c | 6 ++--
drivers/block/ataflop.c | 10 +++---
drivers/block/cciss.c | 22 +++++++-------
drivers/block/cpqarray.c | 9 +++--
drivers/block/floppy.c | 53 ++++++++++++++++++-----------------
drivers/block/hd.c | 14 ++++----
drivers/block/nbd.c | 12 ++++----
drivers/block/paride/pcd.c | 4 +-
drivers/block/paride/pd.c | 8 ++--
drivers/block/paride/pf.c | 8 ++--
drivers/block/ps3disk.c | 9 ++---
drivers/block/sunvdc.c | 2 +-
drivers/block/swim3.c | 34 ++++++++++++----------
drivers/block/sx8.c | 6 ++--
drivers/block/ub.c | 6 ++--
drivers/block/viodasd.c | 2 +-
drivers/block/virtio_blk.c | 2 +-
drivers/block/xd.c | 4 +-
drivers/block/xen-blkfront.c | 11 +++----
drivers/block/xsysace.c | 17 ++++++-----
drivers/block/z2ram.c | 6 ++--
drivers/cdrom/gdrom.c | 6 ++--
drivers/cdrom/viocd.c | 2 +-
drivers/memstick/core/mspro_block.c | 6 ++--
drivers/message/i2o/i2o_block.c | 20 +++++++------
drivers/mmc/card/block.c | 10 +++---
drivers/mtd/mtd_blkdevs.c | 7 ++--
drivers/s390/block/dasd.c | 2 +-
drivers/s390/block/dasd_diag.c | 5 ++-
drivers/s390/block/dasd_eckd.c | 6 ++--
drivers/s390/block/dasd_fba.c | 7 ++--
drivers/s390/char/tape_34xx.c | 2 +-
drivers/s390/char/tape_3590.c | 2 +-
drivers/s390/char/tape_block.c | 2 +-
drivers/sbus/char/jsflash.c | 4 +-
drivers/scsi/eata.c | 24 ++++++++--------
drivers/scsi/lpfc/lpfc_scsi.c | 22 +++++++-------
drivers/scsi/scsi_lib.c | 6 ++--
drivers/scsi/sd.c | 24 ++++++++--------
drivers/scsi/sd_dif.c | 2 +-
drivers/scsi/sr.c | 15 +++++----
drivers/scsi/u14-34f.c | 22 ++++++++------
include/scsi/scsi_cmnd.h | 2 +-
52 files changed, 276 insertions(+), 264 deletions(-)
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 4330127..402ba8f 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -1239,7 +1239,7 @@ static void do_ubd_request(struct request_queue *q)
}
req = dev->request;
- sector = req->sector;
+ sector = blk_rq_pos(req);
while(dev->start_sg < dev->end_sg){
struct scatterlist *sg = &dev->sg[dev->start_sg];
diff --git a/block/as-iosched.c b/block/as-iosched.c
index 45bd070..7a12cf6 100644
--- a/block/as-iosched.c
+++ b/block/as-iosched.c
@@ -306,8 +306,8 @@ as_choose_req(struct as_data *ad, struct request *rq1, struct request *rq2)
data_dir = rq_is_sync(rq1);
last = ad->last_sector[data_dir];
- s1 = rq1->sector;
- s2 = rq2->sector;
+ s1 = blk_rq_pos(rq1);
+ s2 = blk_rq_pos(rq2);
BUG_ON(data_dir != rq_is_sync(rq2));
@@ -566,13 +566,15 @@ static void as_update_iohist(struct as_data *ad, struct as_io_context *aic,
as_update_thinktime(ad, aic, thinktime);
/* Calculate read -> read seek distance */
- if (aic->last_request_pos < rq->sector)
- seek_dist = rq->sector - aic->last_request_pos;
+ if (aic->last_request_pos < blk_rq_pos(rq))
+ seek_dist = blk_rq_pos(rq) -
+ aic->last_request_pos;
else
- seek_dist = aic->last_request_pos - rq->sector;
+ seek_dist = aic->last_request_pos -
+ blk_rq_pos(rq);
as_update_seekdist(ad, aic, seek_dist);
}
- aic->last_request_pos = rq->sector + rq->nr_sectors;
+ aic->last_request_pos = blk_rq_pos(rq) + blk_rq_sectors(rq);
set_bit(AS_TASK_IOSTARTED, &aic->state);
spin_unlock(&aic->lock);
}
@@ -587,7 +589,7 @@ static int as_close_req(struct as_data *ad, struct as_io_context *aic,
{
unsigned long delay; /* jiffies */
sector_t last = ad->last_sector[ad->batch_data_dir];
- sector_t next = rq->sector;
+ sector_t next = blk_rq_pos(rq);
sector_t delta; /* acceptable close offset (in sectors) */
sector_t s;
@@ -981,7 +983,7 @@ static void as_move_to_dispatch(struct as_data *ad, struct request *rq)
* This has to be set in order to be correctly updated by
* as_find_next_rq
*/
- ad->last_sector[data_dir] = rq->sector + rq->nr_sectors;
+ ad->last_sector[data_dir] = blk_rq_pos(rq) + blk_rq_sectors(rq);
if (data_dir == BLK_RW_SYNC) {
struct io_context *ioc = RQ_IOC(rq);
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index c167de5..8713c2f 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -324,7 +324,7 @@ int blkdev_issue_flush(struct block_device *bdev, sector_t *error_sector)
/*
* The driver must store the error location in ->bi_sector, if
* it supports it. For non-stacked drivers, this should be copied
- * from rq->sector.
+ * from blk_rq_pos(rq).
*/
if (error_sector)
*error_sector = bio->bi_sector;
diff --git a/block/blk-core.c b/block/blk-core.c
index 895e55b..82dc206 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -72,7 +72,7 @@ static void drive_stat_acct(struct request *rq, int new_io)
return;
cpu = part_stat_lock();
- part = disk_map_sector_rcu(rq->rq_disk, rq->sector);
+ part = disk_map_sector_rcu(rq->rq_disk, blk_rq_pos(rq));
if (!new_io)
part_stat_inc(cpu, part, merges[rw]);
@@ -185,10 +185,9 @@ void blk_dump_rq_flags(struct request *rq, char *msg)
rq->rq_disk ? rq->rq_disk->disk_name : "?", rq->cmd_type,
rq->cmd_flags);
- printk(KERN_INFO " sector %llu, nr/cnr %lu/%u\n",
- (unsigned long long)rq->sector,
- rq->nr_sectors,
- rq->current_nr_sectors);
+ printk(KERN_INFO " sector %llu, nr/cnr %u/%u\n",
+ (unsigned long long)blk_rq_pos(rq),
+ blk_rq_sectors(rq), blk_rq_cur_sectors(rq));
printk(KERN_INFO " bio %p, biotail %p, buffer %p, len %u\n",
rq->bio, rq->biotail,
rq->buffer, rq->data_len);
@@ -1557,7 +1556,7 @@ EXPORT_SYMBOL(submit_bio);
*/
int blk_rq_check_limits(struct request_queue *q, struct request *rq)
{
- if (rq->nr_sectors > q->max_sectors ||
+ if (blk_rq_sectors(rq) > q->max_sectors ||
rq->data_len > q->max_hw_sectors << 9) {
printk(KERN_ERR "%s: over max size limit.\n", __func__);
return -EIO;
@@ -1645,7 +1644,7 @@ static void blk_account_io_completion(struct request *req, unsigned int bytes)
int cpu;
cpu = part_stat_lock();
- part = disk_map_sector_rcu(req->rq_disk, req->sector);
+ part = disk_map_sector_rcu(req->rq_disk, blk_rq_pos(req));
part_stat_add(cpu, part, sectors[rw], bytes >> 9);
part_stat_unlock();
}
@@ -1665,7 +1664,7 @@ static void blk_account_io_done(struct request *req)
int cpu;
cpu = part_stat_lock();
- part = disk_map_sector_rcu(req->rq_disk, req->sector);
+ part = disk_map_sector_rcu(req->rq_disk, blk_rq_pos(req));
part_stat_inc(cpu, part, ios[rw]);
part_stat_add(cpu, part, ticks[rw], duration);
@@ -1846,7 +1845,7 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
if (error && (blk_fs_request(req) && !(req->cmd_flags & REQ_QUIET))) {
printk(KERN_ERR "end_request: I/O error, dev %s, sector %llu\n",
req->rq_disk ? req->rq_disk->disk_name : "?",
- (unsigned long long)req->sector);
+ (unsigned long long)blk_rq_pos(req));
}
blk_account_io_completion(req, nr_bytes);
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 23d2a6f..bf62a87 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -259,7 +259,7 @@ int ll_back_merge_fn(struct request_queue *q, struct request *req,
else
max_sectors = q->max_sectors;
- if (req->nr_sectors + bio_sectors(bio) > max_sectors) {
+ if (blk_rq_sectors(req) + bio_sectors(bio) > max_sectors) {
req->cmd_flags |= REQ_NOMERGE;
if (req == q->last_merge)
q->last_merge = NULL;
@@ -284,7 +284,7 @@ int ll_front_merge_fn(struct request_queue *q, struct request *req,
max_sectors = q->max_sectors;
- if (req->nr_sectors + bio_sectors(bio) > max_sectors) {
+ if (blk_rq_sectors(req) + bio_sectors(bio) > max_sectors) {
req->cmd_flags |= REQ_NOMERGE;
if (req == q->last_merge)
q->last_merge = NULL;
@@ -315,7 +315,7 @@ static int ll_merge_requests_fn(struct request_queue *q, struct request *req,
/*
* Will it become too large?
*/
- if ((req->nr_sectors + next->nr_sectors) > q->max_sectors)
+ if ((blk_rq_sectors(req) + blk_rq_sectors(next)) > q->max_sectors)
return 0;
total_phys_segments = req->nr_phys_segments + next->nr_phys_segments;
@@ -345,7 +345,7 @@ static void blk_account_io_merge(struct request *req)
int cpu;
cpu = part_stat_lock();
- part = disk_map_sector_rcu(req->rq_disk, req->sector);
+ part = disk_map_sector_rcu(req->rq_disk, blk_rq_pos(req));
part_round_stats(cpu, part);
part_dec_in_flight(part);
@@ -366,7 +366,7 @@ static int attempt_merge(struct request_queue *q, struct request *req,
/*
* not contiguous
*/
- if (req->sector + req->nr_sectors != next->sector)
+ if (blk_rq_pos(req) + blk_rq_sectors(req) != blk_rq_pos(next))
return 0;
if (rq_data_dir(req) != rq_data_dir(next)
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 575083a..db4d990 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -349,8 +349,8 @@ cfq_choose_req(struct cfq_data *cfqd, struct request *rq1, struct request *rq2)
else if (rq_is_meta(rq2) && !rq_is_meta(rq1))
return rq2;
- s1 = rq1->sector;
- s2 = rq2->sector;
+ s1 = blk_rq_pos(rq1);
+ s2 = blk_rq_pos(rq2);
last = cfqd->last_position;
@@ -949,10 +949,10 @@ static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd,
static inline sector_t cfq_dist_from_last(struct cfq_data *cfqd,
struct request *rq)
{
- if (rq->sector >= cfqd->last_position)
- return rq->sector - cfqd->last_position;
+ if (blk_rq_pos(rq) >= cfqd->last_position)
+ return blk_rq_pos(rq) - cfqd->last_position;
else
- return cfqd->last_position - rq->sector;
+ return cfqd->last_position - blk_rq_pos(rq);
}
#define CIC_SEEK_THR 8 * 1024
@@ -1918,10 +1918,10 @@ cfq_update_io_seektime(struct cfq_data *cfqd, struct cfq_io_context *cic,
if (!cic->last_request_pos)
sdist = 0;
- else if (cic->last_request_pos < rq->sector)
- sdist = rq->sector - cic->last_request_pos;
+ else if (cic->last_request_pos < blk_rq_pos(rq))
+ sdist = blk_rq_pos(rq) - cic->last_request_pos;
else
- sdist = cic->last_request_pos - rq->sector;
+ sdist = cic->last_request_pos - blk_rq_pos(rq);
/*
* Don't allow the seek distance to get too large from the
@@ -2071,7 +2071,7 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
cfq_update_io_seektime(cfqd, cic, rq);
cfq_update_idle_window(cfqd, cfqq, cic);
- cic->last_request_pos = rq->sector + rq->nr_sectors;
+ cic->last_request_pos = blk_rq_pos(rq) + blk_rq_sectors(rq);
if (cfqq == cfqd->active_queue) {
/*
diff --git a/block/deadline-iosched.c b/block/deadline-iosched.c
index c4d991d..b547cbc 100644
--- a/block/deadline-iosched.c
+++ b/block/deadline-iosched.c
@@ -138,7 +138,7 @@ deadline_merge(struct request_queue *q, struct request **req, struct bio *bio)
__rq = elv_rb_find(&dd->sort_list[bio_data_dir(bio)], sector);
if (__rq) {
- BUG_ON(sector != __rq->sector);
+ BUG_ON(sector != blk_rq_pos(__rq));
if (elv_rq_merge_ok(__rq, bio)) {
ret = ELEVATOR_FRONT_MERGE;
diff --git a/block/elevator.c b/block/elevator.c
index 1af5d9f..9189200 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -52,7 +52,7 @@ static const int elv_hash_shift = 6;
#define ELV_HASH_FN(sec) \
(hash_long(ELV_HASH_BLOCK((sec)), elv_hash_shift))
#define ELV_HASH_ENTRIES (1 << elv_hash_shift)
-#define rq_hash_key(rq) ((rq)->sector + (rq)->nr_sectors)
+#define rq_hash_key(rq) (blk_rq_pos(rq) + blk_rq_sectors(rq))
DEFINE_TRACE(block_rq_insert);
DEFINE_TRACE(block_rq_issue);
@@ -119,9 +119,9 @@ static inline int elv_try_merge(struct request *__rq, struct bio *bio)
* we can merge and sequence is ok, check if it's possible
*/
if (elv_rq_merge_ok(__rq, bio)) {
- if (__rq->sector + __rq->nr_sectors == bio->bi_sector)
+ if (blk_rq_pos(__rq) + blk_rq_sectors(__rq) == bio->bi_sector)
ret = ELEVATOR_BACK_MERGE;
- else if (__rq->sector - bio_sectors(bio) == bio->bi_sector)
+ else if (blk_rq_pos(__rq) - bio_sectors(bio) == bio->bi_sector)
ret = ELEVATOR_FRONT_MERGE;
}
@@ -370,9 +370,9 @@ struct request *elv_rb_add(struct rb_root *root, struct request *rq)
parent = *p;
__rq = rb_entry(parent, struct request, rb_node);
- if (rq->sector < __rq->sector)
+ if (blk_rq_pos(rq) < blk_rq_pos(__rq))
p = &(*p)->rb_left;
- else if (rq->sector > __rq->sector)
+ else if (blk_rq_pos(rq) > blk_rq_pos(__rq))
p = &(*p)->rb_right;
else
return __rq;
@@ -400,9 +400,9 @@ struct request *elv_rb_find(struct rb_root *root, sector_t sector)
while (n) {
rq = rb_entry(n, struct request, rb_node);
- if (sector < rq->sector)
+ if (sector < blk_rq_pos(rq))
n = n->rb_left;
- else if (sector > rq->sector)
+ else if (sector > blk_rq_pos(rq))
n = n->rb_right;
else
return rq;
@@ -441,14 +441,14 @@ void elv_dispatch_sort(struct request_queue *q, struct request *rq)
break;
if (pos->cmd_flags & stop_flags)
break;
- if (rq->sector >= boundary) {
- if (pos->sector < boundary)
+ if (blk_rq_pos(rq) >= boundary) {
+ if (blk_rq_pos(pos) < boundary)
continue;
} else {
- if (pos->sector >= boundary)
+ if (blk_rq_pos(pos) >= boundary)
break;
}
- if (rq->sector >= pos->sector)
+ if (blk_rq_pos(rq) >= blk_rq_pos(pos))
break;
}
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index f22ed6c..774ab05 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -3338,8 +3338,8 @@ static int DAC960_process_queue(DAC960_Controller_T *Controller, struct request_
}
Command->Completion = Request->end_io_data;
Command->LogicalDriveNumber = (long)Request->rq_disk->private_data;
- Command->BlockNumber = Request->sector;
- Command->BlockCount = Request->nr_sectors;
+ Command->BlockNumber = blk_rq_pos(Request);
+ Command->BlockCount = blk_rq_sectors(Request);
Command->Request = Request;
blkdev_dequeue_request(Request);
Command->SegmentCount = blk_rq_map_sg(req_q,
@@ -3431,7 +3431,7 @@ static void DAC960_queue_partial_rw(DAC960_Command_T *Command)
* successfully as possible.
*/
Command->SegmentCount = 1;
- Command->BlockNumber = Request->sector;
+ Command->BlockNumber = blk_rq_pos(Request);
Command->BlockCount = 1;
DAC960_QueueReadWriteCommand(Command);
return;
diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index 8ff95f2..e4a14b9 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -1351,13 +1351,13 @@ static void redo_fd_request(void)
drive = floppy - unit;
/* Here someone could investigate to be more efficient */
- for (cnt = 0; cnt < CURRENT->current_nr_sectors; cnt++) {
+ for (cnt = 0; cnt < blk_rq_cur_sectors(CURRENT); cnt++) {
#ifdef DEBUG
printk("fd: sector %ld + %d requested for %s\n",
- CURRENT->sector,cnt,
+ blk_rq_pos(CURRENT), cnt,
(rq_data_dir(CURRENT) == READ) ? "read" : "write");
#endif
- block = CURRENT->sector + cnt;
+ block = blk_rq_pos(CURRENT) + cnt;
if ((int)block > floppy->blocks) {
__blk_end_request_cur(CURRENT, -EIO);
goto repeat;
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 2506728..234024c 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -725,7 +725,7 @@ static void do_fd_action( int drive )
if (IS_BUFFERED( drive, ReqSide, ReqTrack )) {
if (ReqCmd == READ) {
copy_buffer( SECTOR_BUFFER(ReqSector), ReqData );
- if (++ReqCnt < CURRENT->current_nr_sectors) {
+ if (++ReqCnt < blk_rq_cur_sectors(CURRENT)) {
/* read next sector */
setup_req_params( drive );
goto repeat;
@@ -1130,7 +1130,7 @@ static void fd_rwsec_done1(int status)
}
}
- if (++ReqCnt < CURRENT->current_nr_sectors) {
+ if (++ReqCnt < blk_rq_cur_sectors(CURRENT)) {
/* read next sector */
setup_req_params( SelectedDrive );
do_fd_action( SelectedDrive );
@@ -1394,7 +1394,7 @@ static void redo_fd_request(void)
DPRINT(("redo_fd_request: CURRENT=%p dev=%s CURRENT->sector=%ld\n",
CURRENT, CURRENT ? CURRENT->rq_disk->disk_name : "",
- CURRENT ? CURRENT->sector : 0 ));
+ CURRENT ? blk_rq_pos(CURRENT) : 0 ));
IsFormatting = 0;
@@ -1440,7 +1440,7 @@ repeat:
UD.autoprobe = 0;
}
- if (CURRENT->sector + 1 > UDT->blocks) {
+ if (blk_rq_pos(CURRENT) + 1 > UDT->blocks) {
__blk_end_request_cur(CURRENT, -EIO);
goto repeat;
}
@@ -1450,7 +1450,7 @@ repeat:
ReqCnt = 0;
ReqCmd = rq_data_dir(CURRENT);
- ReqBlock = CURRENT->sector;
+ ReqBlock = blk_rq_pos(CURRENT);
ReqBuffer = CURRENT->buffer;
setup_req_params( drive );
do_fd_action( drive );
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index f22d493..ab7b04c 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -2835,10 +2835,10 @@ static void do_cciss_request(struct request_queue *q)
c->Request.Timeout = 0; // Don't time out
c->Request.CDB[0] =
(rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write;
- start_blk = creq->sector;
+ start_blk = blk_rq_pos(creq);
#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n", (int)creq->sector,
- (int)creq->nr_sectors);
+ printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n",
+ (int)blk_rq_pos(creq), (int)blk_rq_sectors(creq));
#endif /* CCISS_DEBUG */
sg_init_table(tmp_sg, MAXSGENTRIES);
@@ -2864,8 +2864,8 @@ static void do_cciss_request(struct request_queue *q)
h->maxSG = seg;
#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss: Submitting %lu sectors in %d segments\n",
- creq->nr_sectors, seg);
+ printk(KERN_DEBUG "cciss: Submitting %u sectors in %d segments\n",
+ blk_rq_sectors(creq), seg);
#endif /* CCISS_DEBUG */
c->Header.SGList = c->Header.SGTotal = seg;
@@ -2877,8 +2877,8 @@ static void do_cciss_request(struct request_queue *q)
c->Request.CDB[4] = (start_blk >> 8) & 0xff;
c->Request.CDB[5] = start_blk & 0xff;
c->Request.CDB[6] = 0; // (sect >> 24) & 0xff; MSB
- c->Request.CDB[7] = (creq->nr_sectors >> 8) & 0xff;
- c->Request.CDB[8] = creq->nr_sectors & 0xff;
+ c->Request.CDB[7] = (blk_rq_sectors(creq) >> 8) & 0xff;
+ c->Request.CDB[8] = blk_rq_sectors(creq) & 0xff;
c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0;
} else {
u32 upper32 = upper_32_bits(start_blk);
@@ -2893,10 +2893,10 @@ static void do_cciss_request(struct request_queue *q)
c->Request.CDB[7]= (start_blk >> 16) & 0xff;
c->Request.CDB[8]= (start_blk >> 8) & 0xff;
c->Request.CDB[9]= start_blk & 0xff;
- c->Request.CDB[10]= (creq->nr_sectors >> 24) & 0xff;
- c->Request.CDB[11]= (creq->nr_sectors >> 16) & 0xff;
- c->Request.CDB[12]= (creq->nr_sectors >> 8) & 0xff;
- c->Request.CDB[13]= creq->nr_sectors & 0xff;
+ c->Request.CDB[10]= (blk_rq_sectors(creq) >> 24) & 0xff;
+ c->Request.CDB[11]= (blk_rq_sectors(creq) >> 16) & 0xff;
+ c->Request.CDB[12]= (blk_rq_sectors(creq) >> 8) & 0xff;
+ c->Request.CDB[13]= blk_rq_sectors(creq) & 0xff;
c->Request.CDB[14] = c->Request.CDB[15] = 0;
}
} else if (blk_pc_request(creq)) {
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index 488a8f4..a5caeff 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -919,10 +919,11 @@ queue_next:
c->hdr.size = sizeof(rblk_t) >> 2;
c->size += sizeof(rblk_t);
- c->req.hdr.blk = creq->sector;
+ c->req.hdr.blk = blk_rq_pos(creq);
c->rq = creq;
DBGPX(
- printk("sector=%d, nr_sectors=%d\n", creq->sector, creq->nr_sectors);
+ printk("sector=%d, nr_sectors=%u\n",
+ blk_rq_pos(creq), blk_rq_sectors(creq));
);
sg_init_table(tmp_sg, SG_MAX);
seg = blk_rq_map_sg(q, creq, tmp_sg);
@@ -940,9 +941,9 @@ DBGPX(
tmp_sg[i].offset,
tmp_sg[i].length, dir);
}
-DBGPX( printk("Submitting %d sectors in %d segments\n", creq->nr_sectors, seg); );
+DBGPX( printk("Submitting %u sectors in %d segments\n", blk_rq_sectors(creq), seg); );
c->req.hdr.sg_cnt = seg;
- c->req.hdr.blk_cnt = creq->nr_sectors;
+ c->req.hdr.blk_cnt = blk_rq_sectors(creq);
c->req.hdr.cmd = (rq_data_dir(creq) == READ) ? IDA_READ : IDA_WRITE;
c->type = CMD_RWREQ;
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 1300df6..4524862 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -2303,7 +2303,7 @@ static void floppy_end_request(struct request *req, int error)
/* current_count_sectors can be zero if transfer failed */
if (error)
- nr_sectors = req->current_nr_sectors;
+ nr_sectors = blk_rq_cur_sectors(req);
if (__blk_end_request(req, error, nr_sectors << 9))
return;
@@ -2332,7 +2332,7 @@ static void request_done(int uptodate)
if (uptodate) {
/* maintain values for invalidation on geometry
* change */
- block = current_count_sectors + req->sector;
+ block = current_count_sectors + blk_rq_pos(req);
INFBOUND(DRS->maxblock, block);
if (block > _floppy->sect)
DRS->maxtrack = 1;
@@ -2346,10 +2346,10 @@ static void request_done(int uptodate)
/* record write error information */
DRWE->write_errors++;
if (DRWE->write_errors == 1) {
- DRWE->first_error_sector = req->sector;
+ DRWE->first_error_sector = blk_rq_pos(req);
DRWE->first_error_generation = DRS->generation;
}
- DRWE->last_error_sector = req->sector;
+ DRWE->last_error_sector = blk_rq_pos(req);
DRWE->last_error_generation = DRS->generation;
}
spin_lock_irqsave(q->queue_lock, flags);
@@ -2503,24 +2503,24 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2)
max_sector = transfer_size(ssize,
min(max_sector, max_sector_2),
- current_req->nr_sectors);
+ blk_rq_sectors(current_req));
if (current_count_sectors <= 0 && CT(COMMAND) == FD_WRITE &&
- buffer_max > fsector_t + current_req->nr_sectors)
+ buffer_max > fsector_t + blk_rq_sectors(current_req))
current_count_sectors = min_t(int, buffer_max - fsector_t,
- current_req->nr_sectors);
+ blk_rq_sectors(current_req));
remaining = current_count_sectors << 9;
#ifdef FLOPPY_SANITY_CHECK
- if ((remaining >> 9) > current_req->nr_sectors &&
+ if ((remaining >> 9) > blk_rq_sectors(current_req) &&
CT(COMMAND) == FD_WRITE) {
DPRINT("in copy buffer\n");
printk("current_count_sectors=%ld\n", current_count_sectors);
printk("remaining=%d\n", remaining >> 9);
- printk("current_req->nr_sectors=%ld\n",
- current_req->nr_sectors);
+ printk("current_req->nr_sectors=%u\n",
+ blk_rq_sectors(current_req));
printk("current_req->current_nr_sectors=%u\n",
- current_req->current_nr_sectors);
+ blk_rq_cur_sectors(current_req));
printk("max_sector=%d\n", max_sector);
printk("ssize=%d\n", ssize);
}
@@ -2530,7 +2530,7 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2)
dma_buffer = floppy_track_buffer + ((fsector_t - buffer_min) << 9);
- size = current_req->current_nr_sectors << 9;
+ size = blk_rq_cur_sectors(current_req) << 9;
rq_for_each_segment(bv, current_req, iter) {
if (!remaining)
@@ -2648,10 +2648,10 @@ static int make_raw_rw_request(void)
max_sector = _floppy->sect * _floppy->head;
- TRACK = (int)current_req->sector / max_sector;
- fsector_t = (int)current_req->sector % max_sector;
+ TRACK = (int)blk_rq_pos(current_req) / max_sector;
+ fsector_t = (int)blk_rq_pos(current_req) % max_sector;
if (_floppy->track && TRACK >= _floppy->track) {
- if (current_req->current_nr_sectors & 1) {
+ if (blk_rq_cur_sectors(current_req) & 1) {
current_count_sectors = 1;
return 1;
} else
@@ -2669,7 +2669,7 @@ static int make_raw_rw_request(void)
if (fsector_t >= max_sector) {
current_count_sectors =
min_t(int, _floppy->sect - fsector_t,
- current_req->nr_sectors);
+ blk_rq_sectors(current_req));
return 1;
}
SIZECODE = 2;
@@ -2720,7 +2720,7 @@ static int make_raw_rw_request(void)
in_sector_offset = (fsector_t % _floppy->sect) % ssize;
aligned_sector_t = fsector_t - in_sector_offset;
- max_size = current_req->nr_sectors;
+ max_size = blk_rq_sectors(current_req);
if ((raw_cmd->track == buffer_track) &&
(current_drive == buffer_drive) &&
(fsector_t >= buffer_min) && (fsector_t < buffer_max)) {
@@ -2729,10 +2729,10 @@ static int make_raw_rw_request(void)
copy_buffer(1, max_sector, buffer_max);
return 1;
}
- } else if (in_sector_offset || current_req->nr_sectors < ssize) {
+ } else if (in_sector_offset || blk_rq_sectors(current_req) < ssize) {
if (CT(COMMAND) == FD_WRITE) {
- if (fsector_t + current_req->nr_sectors > ssize &&
- fsector_t + current_req->nr_sectors < ssize + ssize)
+ if (fsector_t + blk_rq_sectors(current_req) > ssize &&
+ fsector_t + blk_rq_sectors(current_req) < ssize + ssize)
max_size = ssize + ssize;
else
max_size = ssize;
@@ -2776,7 +2776,7 @@ static int make_raw_rw_request(void)
(indirect * 2 > direct * 3 &&
*errors < DP->max_errors.read_track && ((!probing
|| (DP->read_track & (1 << DRS->probed_format)))))) {
- max_size = current_req->nr_sectors;
+ max_size = blk_rq_sectors(current_req);
} else {
raw_cmd->kernel_data = current_req->buffer;
raw_cmd->length = current_count_sectors << 9;
@@ -2801,7 +2801,7 @@ static int make_raw_rw_request(void)
fsector_t > buffer_max ||
fsector_t < buffer_min ||
((CT(COMMAND) == FD_READ ||
- (!in_sector_offset && current_req->nr_sectors >= ssize)) &&
+ (!in_sector_offset && blk_rq_sectors(current_req) >= ssize)) &&
max_sector > 2 * max_buffer_sectors + buffer_min &&
max_size + fsector_t > 2 * max_buffer_sectors + buffer_min)
/* not enough space */
@@ -2879,8 +2879,8 @@ static int make_raw_rw_request(void)
printk("write\n");
return 0;
}
- } else if (raw_cmd->length > current_req->nr_sectors << 9 ||
- current_count_sectors > current_req->nr_sectors) {
+ } else if (raw_cmd->length > blk_rq_sectors(current_req) << 9 ||
+ current_count_sectors > blk_rq_sectors(current_req)) {
DPRINT("buffer overrun in direct transfer\n");
return 0;
} else if (raw_cmd->length < current_count_sectors << 9) {
@@ -2990,8 +2990,9 @@ static void do_fd_request(struct request_queue * q)
if (usage_count == 0) {
printk("warning: usage count=0, current_req=%p exiting\n",
current_req);
- printk("sect=%ld type=%x flags=%x\n", (long)current_req->sector,
- current_req->cmd_type, current_req->cmd_flags);
+ printk("sect=%ld type=%x flags=%x\n",
+ (long)blk_rq_pos(current_req), current_req->cmd_type,
+ current_req->cmd_flags);
return;
}
if (test_bit(0, &fdc_busy)) {
diff --git a/drivers/block/hd.c b/drivers/block/hd.c
index 75b9ca9..a3b3994 100644
--- a/drivers/block/hd.c
+++ b/drivers/block/hd.c
@@ -228,7 +228,7 @@ static void dump_status(const char *msg, unsigned int stat)
printk(", CHS=%d/%d/%d", (inb(HD_HCYL)<<8) + inb(HD_LCYL),
inb(HD_CURRENT) & 0xf, inb(HD_SECTOR));
if (CURRENT)
- printk(", sector=%ld", CURRENT->sector);
+ printk(", sector=%ld", blk_rq_pos(CURRENT));
}
printk("\n");
}
@@ -457,9 +457,9 @@ ok_to_read:
req = CURRENT;
insw(HD_DATA, req->buffer, 256);
#ifdef DEBUG
- printk("%s: read: sector %ld, remaining = %ld, buffer=%p\n",
- req->rq_disk->disk_name, req->sector + 1, req->nr_sectors - 1,
- req->buffer+512);
+ printk("%s: read: sector %ld, remaining = %u, buffer=%p\n",
+ req->rq_disk->disk_name, blk_rq_pos(req) + 1,
+ blk_rq_sectors(req) - 1, req->buffer+512);
#endif
if (__blk_end_request(req, 0, 512)) {
SET_HANDLER(&read_intr);
@@ -485,7 +485,7 @@ static void write_intr(void)
continue;
if (!OK_STATUS(i))
break;
- if ((req->nr_sectors <= 1) || (i & DRQ_STAT))
+ if ((blk_rq_sectors(req) <= 1) || (i & DRQ_STAT))
goto ok_to_write;
} while (--retries > 0);
dump_status("write_intr", i);
@@ -589,8 +589,8 @@ repeat:
return;
}
disk = req->rq_disk->private_data;
- block = req->sector;
- nsect = req->nr_sectors;
+ block = blk_rq_pos(req);
+ nsect = blk_rq_sectors(req);
if (block >= get_capacity(req->rq_disk) ||
((block+nsect) > get_capacity(req->rq_disk))) {
printk("%s: bad access: block=%d, count=%d\n",
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index a9ab8be..977a573 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -110,7 +110,7 @@ static void nbd_end_request(struct request *req)
req, error ? "failed" : "done");
spin_lock_irqsave(q->queue_lock, flags);
- __blk_end_request(req, error, req->nr_sectors << 9);
+ __blk_end_request(req, error, blk_rq_sectors(req) << 9);
spin_unlock_irqrestore(q->queue_lock, flags);
}
@@ -231,19 +231,19 @@ static int nbd_send_req(struct nbd_device *lo, struct request *req)
{
int result, flags;
struct nbd_request request;
- unsigned long size = req->nr_sectors << 9;
+ unsigned long size = blk_rq_sectors(req) << 9;
request.magic = htonl(NBD_REQUEST_MAGIC);
request.type = htonl(nbd_cmd(req));
- request.from = cpu_to_be64((u64) req->sector << 9);
+ request.from = cpu_to_be64((u64)blk_rq_pos(req) << 9);
request.len = htonl(size);
memcpy(request.handle, &req, sizeof(req));
- dprintk(DBG_TX, "%s: request %p: sending control (%s@%llu,%luB)\n",
+ dprintk(DBG_TX, "%s: request %p: sending control (%s@%llu,%uB)\n",
lo->disk->disk_name, req,
nbdcmd_to_ascii(nbd_cmd(req)),
- (unsigned long long)req->sector << 9,
- req->nr_sectors << 9);
+ (unsigned long long)blk_rq_pos(req) << 9,
+ blk_rq_sectors(req) << 9);
result = sock_xmit(lo, 1, &request, sizeof(request),
(nbd_cmd(req) == NBD_CMD_WRITE) ? MSG_MORE : 0);
if (result <= 0) {
diff --git a/drivers/block/paride/pcd.c b/drivers/block/paride/pcd.c
index 9fd57c2..2d5dc0a 100644
--- a/drivers/block/paride/pcd.c
+++ b/drivers/block/paride/pcd.c
@@ -728,8 +728,8 @@ static void do_pcd_request(struct request_queue * q)
if (cd != pcd_current)
pcd_bufblk = -1;
pcd_current = cd;
- pcd_sector = pcd_req->sector;
- pcd_count = pcd_req->current_nr_sectors;
+ pcd_sector = blk_rq_pos(pcd_req);
+ pcd_count = blk_rq_cur_sectors(pcd_req);
pcd_buf = pcd_req->buffer;
pcd_busy = 1;
ps_set_intr(do_pcd_read, NULL, 0, nice);
diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c
index 0732df4..9ec5d4a 100644
--- a/drivers/block/paride/pd.c
+++ b/drivers/block/paride/pd.c
@@ -444,11 +444,11 @@ static enum action do_pd_io_start(void)
pd_cmd = rq_data_dir(pd_req);
if (pd_cmd == READ || pd_cmd == WRITE) {
- pd_block = pd_req->sector;
- pd_count = pd_req->current_nr_sectors;
+ pd_block = blk_rq_pos(pd_req);
+ pd_count = blk_rq_cur_sectors(pd_req);
if (pd_block + pd_count > get_capacity(pd_req->rq_disk))
return Fail;
- pd_run = pd_req->nr_sectors;
+ pd_run = blk_rq_sectors(pd_req);
pd_buf = pd_req->buffer;
pd_retries = 0;
if (pd_cmd == READ)
@@ -479,7 +479,7 @@ static int pd_next_buf(void)
return 0;
spin_lock_irqsave(&pd_lock, saved_flags);
__blk_end_request_cur(pd_req, 0);
- pd_count = pd_req->current_nr_sectors;
+ pd_count = blk_rq_cur_sectors(pd_req);
pd_buf = pd_req->buffer;
spin_unlock_irqrestore(&pd_lock, saved_flags);
return 0;
diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c
index 3871e35..e88c889 100644
--- a/drivers/block/paride/pf.c
+++ b/drivers/block/paride/pf.c
@@ -768,9 +768,9 @@ repeat:
return;
pf_current = pf_req->rq_disk->private_data;
- pf_block = pf_req->sector;
- pf_run = pf_req->nr_sectors;
- pf_count = pf_req->current_nr_sectors;
+ pf_block = blk_rq_pos(pf_req);
+ pf_run = blk_rq_sectors(pf_req);
+ pf_count = blk_rq_cur_sectors(pf_req);
if (pf_block + pf_count > get_capacity(pf_req->rq_disk)) {
pf_end_request(-EIO);
@@ -810,7 +810,7 @@ static int pf_next_buf(void)
spin_unlock_irqrestore(&pf_spin_lock, saved_flags);
if (!pf_req)
return 1;
- pf_count = pf_req->current_nr_sectors;
+ pf_count = blk_rq_cur_sectors(pf_req);
pf_buf = pf_req->buffer;
}
return 0;
diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c
index c238867..8d58308 100644
--- a/drivers/block/ps3disk.c
+++ b/drivers/block/ps3disk.c
@@ -134,13 +134,12 @@ static int ps3disk_submit_request_sg(struct ps3_storage_device *dev,
rq_for_each_segment(bv, req, iter)
n++;
dev_dbg(&dev->sbd.core,
- "%s:%u: %s req has %u bvecs for %lu sectors %lu hard sectors\n",
- __func__, __LINE__, op, n, req->nr_sectors,
- blk_rq_sectors(req));
+ "%s:%u: %s req has %u bvecs for %u sectors\n",
+ __func__, __LINE__, op, n, blk_rq_sectors(req));
#endif
- start_sector = req->sector * priv->blocking_factor;
- sectors = req->nr_sectors * priv->blocking_factor;
+ start_sector = blk_rq_pos(req) * priv->blocking_factor;
+ sectors = blk_rq_sectors(req) * priv->blocking_factor;
dev_dbg(&dev->sbd.core, "%s:%u: %s %llu sectors starting at %llu\n",
__func__, __LINE__, op, sectors, start_sector);
diff --git a/drivers/block/sunvdc.c b/drivers/block/sunvdc.c
index f59887c..9f351bf 100644
--- a/drivers/block/sunvdc.c
+++ b/drivers/block/sunvdc.c
@@ -416,7 +416,7 @@ static int __send_request(struct request *req)
desc->slice = 0;
}
desc->status = ~0;
- desc->offset = (req->sector << 9) / port->vdisk_block_size;
+ desc->offset = (blk_rq_pos(req) << 9) / port->vdisk_block_size;
desc->size = len;
desc->ncookies = err;
diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index 4248559..c1b9a4d 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -312,14 +312,14 @@ static void start_request(struct floppy_state *fs)
}
while (fs->state == idle && (req = elv_next_request(swim3_queue))) {
#if 0
- printk("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%ld buf=%p\n",
+ printk("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%u buf=%p\n",
req->rq_disk->disk_name, req->cmd,
- (long)req->sector, req->nr_sectors, req->buffer);
- printk(" errors=%d current_nr_sectors=%ld\n",
- req->errors, req->current_nr_sectors);
+ (long)blk_rq_pos(req), blk_rq_sectors(req), req->buffer);
+ printk(" errors=%d current_nr_sectors=%u\n",
+ req->errors, blk_rq_cur_sectors(req));
#endif
- if (req->sector >= fs->total_secs) {
+ if (blk_rq_pos(req) >= fs->total_secs) {
__blk_end_request_cur(req, -EIO);
continue;
}
@@ -337,13 +337,14 @@ static void start_request(struct floppy_state *fs)
}
}
- /* Do not remove the cast. req->sector is now a sector_t and
- * can be 64 bits, but it will never go past 32 bits for this
- * driver anyway, so we can safely cast it down and not have
- * to do a 64/32 division
+ /* Do not remove the cast. blk_rq_pos(req) is now a
+ * sector_t and can be 64 bits, but it will never go
+ * past 32 bits for this driver anyway, so we can
+ * safely cast it down and not have to do a 64/32
+ * division
*/
- fs->req_cyl = ((long)req->sector) / fs->secpercyl;
- x = ((long)req->sector) % fs->secpercyl;
+ fs->req_cyl = ((long)blk_rq_pos(req)) / fs->secpercyl;
+ x = ((long)blk_rq_pos(req)) % fs->secpercyl;
fs->head = x / fs->secpertrack;
fs->req_sector = x % fs->secpertrack + 1;
fd_req = req;
@@ -420,7 +421,7 @@ static inline void setup_transfer(struct floppy_state *fs)
struct dbdma_cmd *cp = fs->dma_cmd;
struct dbdma_regs __iomem *dr = fs->dma;
- if (fd_req->current_nr_sectors <= 0) {
+ if (blk_rq_cur_sectors(fd_req) <= 0) {
printk(KERN_ERR "swim3: transfer 0 sectors?\n");
return;
}
@@ -428,8 +429,8 @@ static inline void setup_transfer(struct floppy_state *fs)
n = 1;
else {
n = fs->secpertrack - fs->req_sector + 1;
- if (n > fd_req->current_nr_sectors)
- n = fd_req->current_nr_sectors;
+ if (n > blk_rq_cur_sectors(fd_req))
+ n = blk_rq_cur_sectors(fd_req);
}
fs->scount = n;
swim3_select(fs, fs->head? READ_DATA_1: READ_DATA_0);
@@ -600,7 +601,8 @@ static void xfer_timeout(unsigned long data)
out_8(&sw->control_bic, WRITE_SECTORS | DO_ACTION);
out_8(&sw->select, RELAX);
printk(KERN_ERR "swim3: timeout %sing sector %ld\n",
- (rq_data_dir(fd_req)==WRITE? "writ": "read"), (long)fd_req->sector);
+ (rq_data_dir(fd_req)==WRITE? "writ": "read"),
+ (long)blk_rq_pos(fd_req));
__blk_end_request_cur(fd_req, -EIO);
fs->state = idle;
start_request(fs);
@@ -714,7 +716,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id)
} else {
printk("swim3: error %sing block %ld (err=%x)\n",
rq_data_dir(fd_req) == WRITE? "writ": "read",
- (long)fd_req->sector, err);
+ (long)blk_rq_pos(fd_req), err);
__blk_end_request_cur(fd_req, -EIO);
fs->state = idle;
}
diff --git a/drivers/block/sx8.c b/drivers/block/sx8.c
index 60e85bb..087c94c 100644
--- a/drivers/block/sx8.c
+++ b/drivers/block/sx8.c
@@ -903,10 +903,10 @@ queue_one_request:
msg->sg_count = n_elem;
msg->sg_type = SGT_32BIT;
msg->handle = cpu_to_le32(TAG_ENCODE(crq->tag));
- msg->lba = cpu_to_le32(rq->sector & 0xffffffff);
- tmp = (rq->sector >> 16) >> 16;
+ msg->lba = cpu_to_le32(blk_rq_pos(rq) & 0xffffffff);
+ tmp = (blk_rq_pos(rq) >> 16) >> 16;
msg->lba_high = cpu_to_le16( (u16) tmp );
- msg->lba_count = cpu_to_le16(rq->nr_sectors);
+ msg->lba_count = cpu_to_le16(blk_rq_sectors(rq));
msg_size = sizeof(struct carm_msg_rw) - sizeof(msg->sg);
for (i = 0; i < n_elem; i++) {
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index 8c2cc71..dc3b899 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -726,8 +726,8 @@ static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
* The call to blk_queue_hardsect_size() guarantees that request
* is aligned, but it is given in terms of 512 byte units, always.
*/
- block = rq->sector >> lun->capacity.bshift;
- nblks = rq->nr_sectors >> lun->capacity.bshift;
+ block = blk_rq_pos(rq) >> lun->capacity.bshift;
+ nblks = blk_rq_sectors(rq) >> lun->capacity.bshift;
cmd->cdb[0] = (cmd->dir == UB_DIR_READ)? READ_10: WRITE_10;
/* 10-byte uses 4 bytes of LBA: 2147483648KB, 2097152MB, 2048GB */
@@ -739,7 +739,7 @@ static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
cmd->cdb[8] = nblks;
cmd->cdb_len = 10;
- cmd->len = rq->nr_sectors * 512;
+ cmd->len = blk_rq_sectors(rq) * 512;
}
static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c
index e821eed..2086cb1 100644
--- a/drivers/block/viodasd.c
+++ b/drivers/block/viodasd.c
@@ -252,7 +252,7 @@ static int send_request(struct request *req)
struct viodasd_device *d;
unsigned long flags;
- start = (u64)req->sector << 9;
+ start = (u64)blk_rq_pos(req) << 9;
if (rq_data_dir(req) == READ) {
direction = DMA_FROM_DEVICE;
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 50745e6..1980ab4 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -85,7 +85,7 @@ static bool do_req(struct request_queue *q, struct virtio_blk *vblk,
vbr->req = req;
if (blk_fs_request(vbr->req)) {
vbr->out_hdr.type = 0;
- vbr->out_hdr.sector = vbr->req->sector;
+ vbr->out_hdr.sector = blk_rq_pos(vbr->req);
vbr->out_hdr.ioprio = req_get_ioprio(vbr->req);
} else if (blk_pc_request(vbr->req)) {
vbr->out_hdr.type = VIRTIO_BLK_T_SCSI_CMD;
diff --git a/drivers/block/xd.c b/drivers/block/xd.c
index 14be4c1..4ef8801 100644
--- a/drivers/block/xd.c
+++ b/drivers/block/xd.c
@@ -306,8 +306,8 @@ static void do_xd_request (struct request_queue * q)
return;
while ((req = elv_next_request(q)) != NULL) {
- unsigned block = req->sector;
- unsigned count = req->nr_sectors;
+ unsigned block = blk_rq_pos(req);
+ unsigned count = blk_rq_sectors(req);
XD_INFO *disk = req->rq_disk->private_data;
int res = 0;
int retry;
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index b456447..91fc565 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -231,7 +231,7 @@ static int blkif_queue_request(struct request *req)
info->shadow[id].request = (unsigned long)req;
ring_req->id = id;
- ring_req->sector_number = (blkif_sector_t)req->sector;
+ ring_req->sector_number = (blkif_sector_t)blk_rq_pos(req);
ring_req->handle = info->handle;
ring_req->operation = rq_data_dir(req) ?
@@ -310,11 +310,10 @@ static void do_blkif_request(struct request_queue *rq)
goto wait;
pr_debug("do_blk_req %p: cmd %p, sec %lx, "
- "(%u/%li) buffer:%p [%s]\n",
- req, req->cmd, (unsigned long)req->sector,
- req->current_nr_sectors,
- req->nr_sectors, req->buffer,
- rq_data_dir(req) ? "write" : "read");
+ "(%u/%u) buffer:%p [%s]\n",
+ req, req->cmd, (unsigned long)blk_rq_pos(req),
+ blk_rq_cur_sectors(req), blk_rq_sectors(req),
+ req->buffer, rq_data_dir(req) ? "write" : "read");
blkdev_dequeue_request(req);
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 5722931..97c99b4 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -646,13 +646,14 @@ static void ace_fsm_dostate(struct ace_device *ace)
/* Okay, it's a data request, set it up for transfer */
dev_dbg(ace->dev,
"request: sec=%llx hcnt=%x, ccnt=%x, dir=%i\n",
- (unsigned long long) req->sector, blk_rq_sectors(req),
- req->current_nr_sectors, rq_data_dir(req));
+ (unsigned long long)blk_rq_pos(req),
+ blk_rq_sectors(req), blk_rq_cur_sectors(req),
+ rq_data_dir(req));
ace->req = req;
ace->data_ptr = req->buffer;
- ace->data_count = req->current_nr_sectors * ACE_BUF_PER_SECTOR;
- ace_out32(ace, ACE_MPULBA, req->sector & 0x0FFFFFFF);
+ ace->data_count = blk_rq_cur_sectors(req) * ACE_BUF_PER_SECTOR;
+ ace_out32(ace, ACE_MPULBA, blk_rq_pos(req) & 0x0FFFFFFF);
count = blk_rq_sectors(req);
if (rq_data_dir(req)) {
@@ -688,7 +689,7 @@ static void ace_fsm_dostate(struct ace_device *ace)
dev_dbg(ace->dev,
"CFBSY set; t=%i iter=%i c=%i dc=%i irq=%i\n",
ace->fsm_task, ace->fsm_iter_num,
- ace->req->current_nr_sectors * 16,
+ blk_rq_cur_sectors(ace->req) * 16,
ace->data_count, ace->in_irq);
ace_fsm_yield(ace); /* need to poll CFBSY bit */
break;
@@ -697,7 +698,7 @@ static void ace_fsm_dostate(struct ace_device *ace)
dev_dbg(ace->dev,
"DATABUF not set; t=%i iter=%i c=%i dc=%i irq=%i\n",
ace->fsm_task, ace->fsm_iter_num,
- ace->req->current_nr_sectors * 16,
+ blk_rq_cur_sectors(ace->req) * 16,
ace->data_count, ace->in_irq);
ace_fsm_yieldirq(ace);
break;
@@ -721,10 +722,10 @@ static void ace_fsm_dostate(struct ace_device *ace)
blk_rq_cur_bytes(ace->req))) {
/* dev_dbg(ace->dev, "next block; h=%u c=%u\n",
* blk_rq_sectors(ace->req),
- * ace->req->current_nr_sectors);
+ * blk_rq_cur_sectors(ace->req));
*/
ace->data_ptr = ace->req->buffer;
- ace->data_count = ace->req->current_nr_sectors * 16;
+ ace->data_count = blk_rq_cur_sectors(ace->req) * 16;
ace_fsm_yieldirq(ace);
break;
}
diff --git a/drivers/block/z2ram.c b/drivers/block/z2ram.c
index b66ad58..d4e6b71 100644
--- a/drivers/block/z2ram.c
+++ b/drivers/block/z2ram.c
@@ -71,12 +71,12 @@ static void do_z2_request(struct request_queue *q)
{
struct request *req;
while ((req = elv_next_request(q)) != NULL) {
- unsigned long start = req->sector << 9;
- unsigned long len = req->current_nr_sectors << 9;
+ unsigned long start = blk_rq_pos(req) << 9;
+ unsigned long len = blk_rq_cur_sectors(req) << 9;
if (start + len > z2ram_size) {
printk( KERN_ERR DEVICE_NAME ": bad access: block=%lu, count=%u\n",
- req->sector, req->current_nr_sectors);
+ blk_rq_pos(req), blk_rq_cur_sectors(req));
__blk_end_request_cur(req, -EIO);
continue;
}
diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
index cab2b1f..488423c 100644
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -584,8 +584,8 @@ static void gdrom_readdisk_dma(struct work_struct *work)
list_for_each_safe(elem, next, &gdrom_deferred) {
req = list_entry(elem, struct request, queuelist);
spin_unlock(&gdrom_lock);
- block = req->sector/GD_TO_BLK + GD_SESSION_OFFSET;
- block_cnt = req->nr_sectors/GD_TO_BLK;
+ block = blk_rq_pos(req)/GD_TO_BLK + GD_SESSION_OFFSET;
+ block_cnt = blk_rq_sectors(req)/GD_TO_BLK;
ctrl_outl(PHYSADDR(req->buffer), GDROM_DMA_STARTADDR_REG);
ctrl_outl(block_cnt * GDROM_HARD_SECTOR, GDROM_DMA_LENGTH_REG);
ctrl_outl(1, GDROM_DMA_DIRECTION_REG);
@@ -661,7 +661,7 @@ static void gdrom_request(struct request_queue *rq)
printk(" write request ignored\n");
__blk_end_request_cur(req, -EIO);
}
- if (req->nr_sectors)
+ if (blk_rq_sectors(req))
gdrom_request_handler_dma(req);
else
__blk_end_request_cur(req, -EIO);
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index cc3efa0..6e190a9 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -282,7 +282,7 @@ static int send_request(struct request *req)
viopath_targetinst(viopath_hostLp),
(u64)req, VIOVERSION << 16,
((u64)DEVICE_NR(diskinfo) << 48) | dmaaddr,
- (u64)req->sector * 512, len, 0);
+ (u64)blk_rq_pos(req) * 512, len, 0);
if (hvrc != HvLpEvent_Rc_Good) {
printk(VIOCD_KERN_WARNING "hv error on op %d\n", (int)hvrc);
return -1;
diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c
index a416346..9e600d2 100644
--- a/drivers/memstick/core/mspro_block.c
+++ b/drivers/memstick/core/mspro_block.c
@@ -677,10 +677,10 @@ try_again:
continue;
}
- t_sec = msb->block_req->sector << 9;
+ t_sec = blk_rq_pos(msb->block_req) << 9;
sector_div(t_sec, msb->page_size);
- count = msb->block_req->nr_sectors << 9;
+ count = blk_rq_sectors(msb->block_req) << 9;
count /= msb->page_size;
param.system = msb->system;
@@ -745,7 +745,7 @@ static int mspro_block_complete_req(struct memstick_dev *card, int error)
t_len *= msb->page_size;
}
} else
- t_len = msb->block_req->nr_sectors << 9;
+ t_len = blk_rq_sectors(msb->block_req) << 9;
dev_dbg(&card->dev, "transferred %x (%d)\n", t_len, error);
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index 56e60f0..510eb47 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -761,7 +761,7 @@ static int i2o_block_transfer(struct request *req)
break;
case CACHE_SMARTFETCH:
- if (req->nr_sectors > 16)
+ if (blk_rq_sectors(req) > 16)
ctl_flags = 0x201F0008;
else
ctl_flags = 0x001F0000;
@@ -781,13 +781,13 @@ static int i2o_block_transfer(struct request *req)
ctl_flags = 0x001F0010;
break;
case CACHE_SMARTBACK:
- if (req->nr_sectors > 16)
+ if (blk_rq_sectors(req) > 16)
ctl_flags = 0x001F0004;
else
ctl_flags = 0x001F0010;
break;
case CACHE_SMARTTHROUGH:
- if (req->nr_sectors > 16)
+ if (blk_rq_sectors(req) > 16)
ctl_flags = 0x001F0004;
else
ctl_flags = 0x001F0010;
@@ -827,22 +827,24 @@ static int i2o_block_transfer(struct request *req)
*mptr++ = cpu_to_le32(scsi_flags);
- *((u32 *) & cmd[2]) = cpu_to_be32(req->sector * hwsec);
- *((u16 *) & cmd[7]) = cpu_to_be16(req->nr_sectors * hwsec);
+ *((u32 *) & cmd[2]) = cpu_to_be32(blk_rq_pos(req) * hwsec);
+ *((u16 *) & cmd[7]) = cpu_to_be16(blk_rq_sectors(req) * hwsec);
memcpy(mptr, cmd, 10);
mptr += 4;
- *mptr++ = cpu_to_le32(req->nr_sectors << KERNEL_SECTOR_SHIFT);
+ *mptr++ =
+ cpu_to_le32(blk_rq_sectors(req) << KERNEL_SECTOR_SHIFT);
} else
#endif
{
msg->u.head[1] = cpu_to_le32(cmd | HOST_TID << 12 | tid);
*mptr++ = cpu_to_le32(ctl_flags);
- *mptr++ = cpu_to_le32(req->nr_sectors << KERNEL_SECTOR_SHIFT);
*mptr++ =
- cpu_to_le32((u32) (req->sector << KERNEL_SECTOR_SHIFT));
+ cpu_to_le32(blk_rq_sectors(req) << KERNEL_SECTOR_SHIFT);
+ *mptr++ =
+ cpu_to_le32((u32) (blk_rq_pos(req) << KERNEL_SECTOR_SHIFT));
*mptr++ =
- cpu_to_le32(req->sector >> (32 - KERNEL_SECTOR_SHIFT));
+ cpu_to_le32(blk_rq_pos(req) >> (32 - KERNEL_SECTOR_SHIFT));
}
if (!i2o_block_sglist_alloc(c, ireq, &mptr)) {
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index fe8041e..949e997 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -243,7 +243,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
brq.mrq.cmd = &brq.cmd;
brq.mrq.data = &brq.data;
- brq.cmd.arg = req->sector;
+ brq.cmd.arg = blk_rq_pos(req);
if (!mmc_card_blockaddr(card))
brq.cmd.arg <<= 9;
brq.cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
@@ -251,7 +251,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
brq.stop.opcode = MMC_STOP_TRANSMISSION;
brq.stop.arg = 0;
brq.stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
- brq.data.blocks = req->nr_sectors;
+ brq.data.blocks = blk_rq_sectors(req);
/*
* After a read error, we redo the request one sector at a time
@@ -293,7 +293,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
* Adjust the sg list so it is the same size as the
* request.
*/
- if (brq.data.blocks != req->nr_sectors) {
+ if (brq.data.blocks != blk_rq_sectors(req)) {
int i, data_size = brq.data.blocks << 9;
struct scatterlist *sg;
@@ -344,8 +344,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
printk(KERN_ERR "%s: error %d transferring data,"
" sector %u, nr %u, card status %#x\n",
req->rq_disk->disk_name, brq.data.error,
- (unsigned)req->sector,
- (unsigned)req->nr_sectors, status);
+ (unsigned)blk_rq_pos(req),
+ (unsigned)blk_rq_sectors(req), status);
}
if (brq.stop.error) {
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 76c4c8d..4ea2e67 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -47,8 +47,8 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr,
unsigned long block, nsect;
char *buf;
- block = req->sector << 9 >> tr->blkshift;
- nsect = req->current_nr_sectors << 9 >> tr->blkshift;
+ block = blk_rq_pos(req) << 9 >> tr->blkshift;
+ nsect = blk_rq_cur_sectors(req) << 9 >> tr->blkshift;
buf = req->buffer;
@@ -59,7 +59,8 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr,
if (!blk_fs_request(req))
return -EIO;
- if (req->sector + req->current_nr_sectors > get_capacity(req->rq_disk))
+ if (blk_rq_pos(req) + blk_rq_cur_sectors(req) >
+ get_capacity(req->rq_disk))
return -EIO;
switch(rq_data_dir(req)) {
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index fabec95..7df03c7 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -603,7 +603,7 @@ static void dasd_profile_end(struct dasd_block *block,
if (dasd_profile_level != DASD_PROFILE_ON)
return;
- sectors = req->nr_sectors;
+ sectors = blk_rq_sectors(req);
if (!cqr->buildclk || !cqr->startclk ||
!cqr->stopclk || !cqr->endclk ||
!sectors)
diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c
index b9a7f77..2efaddf 100644
--- a/drivers/s390/block/dasd_diag.c
+++ b/drivers/s390/block/dasd_diag.c
@@ -505,8 +505,9 @@ static struct dasd_ccw_req *dasd_diag_build_cp(struct dasd_device *memdev,
return ERR_PTR(-EINVAL);
blksize = block->bp_block;
/* Calculate record id of first and last block. */
- first_rec = req->sector >> block->s2b_shift;
- last_rec = (req->sector + req->nr_sectors - 1) >> block->s2b_shift;
+ first_rec = blk_rq_pos(req) >> block->s2b_shift;
+ last_rec =
+ (blk_rq_pos(req) + blk_rq_sectors(req) - 1) >> block->s2b_shift;
/* Check struct bio and count the number of blocks for the request. */
count = 0;
rq_for_each_segment(bv, req, iter) {
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index cb52da0..a41c940 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -2354,10 +2354,10 @@ static struct dasd_ccw_req *dasd_eckd_build_cp(struct dasd_device *startdev,
blksize = block->bp_block;
blk_per_trk = recs_per_track(&private->rdc_data, 0, blksize);
/* Calculate record id of first and last block. */
- first_rec = first_trk = req->sector >> block->s2b_shift;
+ first_rec = first_trk = blk_rq_pos(req) >> block->s2b_shift;
first_offs = sector_div(first_trk, blk_per_trk);
last_rec = last_trk =
- (req->sector + req->nr_sectors - 1) >> block->s2b_shift;
+ (blk_rq_pos(req) + blk_rq_sectors(req) - 1) >> block->s2b_shift;
last_offs = sector_div(last_trk, blk_per_trk);
cdlspecial = (private->uses_cdl && first_rec < 2*blk_per_trk);
@@ -2420,7 +2420,7 @@ dasd_eckd_free_cp(struct dasd_ccw_req *cqr, struct request *req)
private = (struct dasd_eckd_private *) cqr->block->base->private;
blksize = cqr->block->bp_block;
blk_per_trk = recs_per_track(&private->rdc_data, 0, blksize);
- recid = req->sector >> cqr->block->s2b_shift;
+ recid = blk_rq_pos(req) >> cqr->block->s2b_shift;
ccw = cqr->cpaddr;
/* Skip over define extent & locate record. */
ccw++;
diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c
index a3eb6fd..8912358 100644
--- a/drivers/s390/block/dasd_fba.c
+++ b/drivers/s390/block/dasd_fba.c
@@ -270,8 +270,9 @@ static struct dasd_ccw_req *dasd_fba_build_cp(struct dasd_device * memdev,
return ERR_PTR(-EINVAL);
blksize = block->bp_block;
/* Calculate record id of first and last block. */
- first_rec = req->sector >> block->s2b_shift;
- last_rec = (req->sector + req->nr_sectors - 1) >> block->s2b_shift;
+ first_rec = blk_rq_pos(req) >> block->s2b_shift;
+ last_rec =
+ (blk_rq_pos(req) + blk_rq_sectors(req) - 1) >> block->s2b_shift;
/* Check struct bio and count the number of blocks for the request. */
count = 0;
cidaw = 0;
@@ -309,7 +310,7 @@ static struct dasd_ccw_req *dasd_fba_build_cp(struct dasd_device * memdev,
ccw = cqr->cpaddr;
/* First ccw is define extent. */
define_extent(ccw++, cqr->data, rq_data_dir(req),
- block->bp_block, req->sector, req->nr_sectors);
+ block->bp_block, blk_rq_pos(req), blk_rq_sectors(req));
/* Build locate_record + read/write ccws. */
idaws = (unsigned long *) (cqr->data + sizeof(struct DE_fba_data));
LO_data = (struct LO_fba_data *) (idaws + cidaw);
diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c
index 5f8e8ef..2d00a38 100644
--- a/drivers/s390/char/tape_34xx.c
+++ b/drivers/s390/char/tape_34xx.c
@@ -1134,7 +1134,7 @@ tape_34xx_bread(struct tape_device *device, struct request *req)
/* Setup ccws. */
request->op = TO_BLOCK;
start_block = (struct tape_34xx_block_id *) request->cpdata;
- start_block->block = req->sector >> TAPEBLOCK_HSEC_S2B;
+ start_block->block = blk_rq_pos(req) >> TAPEBLOCK_HSEC_S2B;
DBF_EVENT(6, "start_block = %i\n", start_block->block);
ccw = request->cpaddr;
diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c
index 823b05b..c453b2f 100644
--- a/drivers/s390/char/tape_3590.c
+++ b/drivers/s390/char/tape_3590.c
@@ -633,7 +633,7 @@ tape_3590_bread(struct tape_device *device, struct request *req)
struct req_iterator iter;
DBF_EVENT(6, "xBREDid:");
- start_block = req->sector >> TAPEBLOCK_HSEC_S2B;
+ start_block = blk_rq_pos(req) >> TAPEBLOCK_HSEC_S2B;
DBF_EVENT(6, "start_block = %i\n", start_block);
rq_for_each_segment(bv, req, iter)
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
index 86596d3..5d035e4 100644
--- a/drivers/s390/char/tape_block.c
+++ b/drivers/s390/char/tape_block.c
@@ -87,7 +87,7 @@ __tapeblock_end_request(struct tape_request *ccw_req, void *data)
if (ccw_req->rc == 0)
/* Update position. */
device->blk_data.block_position =
- (req->sector + req->nr_sectors) >> TAPEBLOCK_HSEC_S2B;
+ (blk_rq_pos(req) + blk_rq_sectors(req)) >> TAPEBLOCK_HSEC_S2B;
else
/* We lost the position information due to an error. */
device->blk_data.block_position = -1;
diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c
index 0961788..2132c90 100644
--- a/drivers/sbus/char/jsflash.c
+++ b/drivers/sbus/char/jsflash.c
@@ -188,8 +188,8 @@ static void jsfd_do_request(struct request_queue *q)
while ((req = elv_next_request(q)) != NULL) {
struct jsfd_part *jdp = req->rq_disk->private_data;
- unsigned long offset = req->sector << 9;
- size_t len = req->current_nr_sectors << 9;
+ unsigned long offset = blk_rq_pos(req) << 9;
+ size_t len = blk_rq_cur_sectors(req) << 9;
if ((offset + len) > jdp->dsize) {
__blk_end_request_cur(req, -EIO);
diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
index be5099d..c7076ce 100644
--- a/drivers/scsi/eata.c
+++ b/drivers/scsi/eata.c
@@ -1825,7 +1825,7 @@ static int eata2x_queuecommand(struct scsi_cmnd *SCpnt,
if (linked_comm && SCpnt->device->queue_depth > 2
&& TLDEV(SCpnt->device->type)) {
ha->cp_stat[i] = READY;
- flush_dev(SCpnt->device, SCpnt->request->sector, ha, 0);
+ flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), ha, 0);
return 0;
}
@@ -2144,13 +2144,13 @@ static int reorder(struct hostdata *ha, unsigned long cursec,
if (!cpp->din)
input_only = 0;
- if (SCpnt->request->sector < minsec)
- minsec = SCpnt->request->sector;
- if (SCpnt->request->sector > maxsec)
- maxsec = SCpnt->request->sector;
+ if (blk_rq_pos(SCpnt->request) < minsec)
+ minsec = blk_rq_pos(SCpnt->request);
+ if (blk_rq_pos(SCpnt->request) > maxsec)
+ maxsec = blk_rq_pos(SCpnt->request);
- sl[n] = SCpnt->request->sector;
- ioseek += SCpnt->request->nr_sectors;
+ sl[n] = blk_rq_pos(SCpnt->request);
+ ioseek += blk_rq_sectors(SCpnt->request);
if (!n)
continue;
@@ -2190,7 +2190,7 @@ static int reorder(struct hostdata *ha, unsigned long cursec,
k = il[n];
cpp = &ha->cp[k];
SCpnt = cpp->SCpnt;
- ll[n] = SCpnt->request->nr_sectors;
+ ll[n] = blk_rq_sectors(SCpnt->request);
pl[n] = SCpnt->serial_number;
if (!n)
@@ -2236,12 +2236,12 @@ static int reorder(struct hostdata *ha, unsigned long cursec,
cpp = &ha->cp[k];
SCpnt = cpp->SCpnt;
scmd_printk(KERN_INFO, SCpnt,
- "%s pid %ld mb %d fc %d nr %d sec %ld ns %ld"
+ "%s pid %ld mb %d fc %d nr %d sec %ld ns %u"
" cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n",
(ihdlr ? "ihdlr" : "qcomm"),
SCpnt->serial_number, k, flushcount,
- n_ready, SCpnt->request->sector,
- SCpnt->request->nr_sectors, cursec, YESNO(s),
+ n_ready, blk_rq_pos(SCpnt->request),
+ blk_rq_sectors(SCpnt->request), cursec, YESNO(s),
YESNO(r), YESNO(rev), YESNO(input_only),
YESNO(overlap), cpp->din);
}
@@ -2408,7 +2408,7 @@ static irqreturn_t ihdlr(struct Scsi_Host *shost)
if (linked_comm && SCpnt->device->queue_depth > 2
&& TLDEV(SCpnt->device->type))
- flush_dev(SCpnt->device, SCpnt->request->sector, ha, 1);
+ flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), ha, 1);
tstatus = status_byte(spp->target_status);
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 36fd2e7..a8fab39 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1313,10 +1313,10 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd,
uint32_t bgstat = bgf->bgstat;
uint64_t failing_sector = 0;
- printk(KERN_ERR "BG ERROR in cmd 0x%x lba 0x%llx blk cnt 0x%lx "
+ printk(KERN_ERR "BG ERROR in cmd 0x%x lba 0x%llx blk cnt 0x%x "
"bgstat=0x%x bghm=0x%x\n",
cmd->cmnd[0], (unsigned long long)scsi_get_lba(cmd),
- cmd->request->nr_sectors, bgstat, bghm);
+ blk_rq_sectors(cmd->request), bgstat, bghm);
spin_lock(&_dump_buf_lock);
if (!_dump_buf_done) {
@@ -2375,15 +2375,15 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
if (cmnd->cmnd[0] == READ_10)
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
"9035 BLKGRD: READ @ sector %llu, "
- "count %lu\n",
- (unsigned long long)scsi_get_lba(cmnd),
- cmnd->request->nr_sectors);
+ "count %u\n",
+ (unsigned long long)scsi_get_lba(cmnd),
+ blk_rq_sectors(cmnd->request));
else if (cmnd->cmnd[0] == WRITE_10)
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
"9036 BLKGRD: WRITE @ sector %llu, "
- "count %lu cmd=%p\n",
+ "count %u cmd=%p\n",
(unsigned long long)scsi_get_lba(cmnd),
- cmnd->request->nr_sectors,
+ blk_rq_sectors(cmnd->request),
cmnd);
err = lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd);
@@ -2403,15 +2403,15 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
if (cmnd->cmnd[0] == READ_10)
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
"9040 dbg: READ @ sector %llu, "
- "count %lu\n",
+ "count %u\n",
(unsigned long long)scsi_get_lba(cmnd),
- cmnd->request->nr_sectors);
+ blk_rq_sectors(cmnd->request));
else if (cmnd->cmnd[0] == WRITE_10)
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
"9041 dbg: WRITE @ sector %llu, "
- "count %lu cmd=%p\n",
+ "count %u cmd=%p\n",
(unsigned long long)scsi_get_lba(cmnd),
- cmnd->request->nr_sectors, cmnd);
+ blk_rq_sectors(cmnd->request), cmnd);
else
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
"9042 dbg: parser not implemented\n");
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 9ff0ca9..39b3acf 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -787,9 +787,9 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
* Next deal with any sectors which we were able to correctly
* handle.
*/
- SCSI_LOG_HLCOMPLETE(1, printk("%ld sectors total, "
+ SCSI_LOG_HLCOMPLETE(1, printk("%u sectors total, "
"%d bytes done.\n",
- req->nr_sectors, good_bytes));
+ blk_rq_sectors(req), good_bytes));
/*
* Recovered errors need reporting, but they're always treated
@@ -968,7 +968,7 @@ static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb,
if (blk_pc_request(req))
sdb->length = req->data_len;
else
- sdb->length = req->nr_sectors << 9;
+ sdb->length = blk_rq_sectors(req) << 9;
return BLKPREP_OK;
}
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 3fcb64b..70c4dd9 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -383,9 +383,9 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
struct scsi_device *sdp = q->queuedata;
struct gendisk *disk = rq->rq_disk;
struct scsi_disk *sdkp;
- sector_t block = rq->sector;
+ sector_t block = blk_rq_pos(rq);
sector_t threshold;
- unsigned int this_count = rq->nr_sectors;
+ unsigned int this_count = blk_rq_sectors(rq);
int ret, host_dif;
if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
@@ -412,10 +412,10 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
this_count));
if (!sdp || !scsi_device_online(sdp) ||
- block + rq->nr_sectors > get_capacity(disk)) {
+ block + blk_rq_sectors(rq) > get_capacity(disk)) {
SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
- "Finishing %ld sectors\n",
- rq->nr_sectors));
+ "Finishing %u sectors\n",
+ blk_rq_sectors(rq)));
SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
"Retry with 0x%p\n", SCpnt));
goto out;
@@ -462,7 +462,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
* for this.
*/
if (sdp->sector_size == 1024) {
- if ((block & 1) || (rq->nr_sectors & 1)) {
+ if ((block & 1) || (blk_rq_sectors(rq) & 1)) {
scmd_printk(KERN_ERR, SCpnt,
"Bad block number requested\n");
goto out;
@@ -472,7 +472,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
}
}
if (sdp->sector_size == 2048) {
- if ((block & 3) || (rq->nr_sectors & 3)) {
+ if ((block & 3) || (blk_rq_sectors(rq) & 3)) {
scmd_printk(KERN_ERR, SCpnt,
"Bad block number requested\n");
goto out;
@@ -482,7 +482,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
}
}
if (sdp->sector_size == 4096) {
- if ((block & 7) || (rq->nr_sectors & 7)) {
+ if ((block & 7) || (blk_rq_sectors(rq) & 7)) {
scmd_printk(KERN_ERR, SCpnt,
"Bad block number requested\n");
goto out;
@@ -511,10 +511,10 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
}
SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
- "%s %d/%ld 512 byte blocks.\n",
+ "%s %d/%u 512 byte blocks.\n",
(rq_data_dir(rq) == WRITE) ?
"writing" : "reading", this_count,
- rq->nr_sectors));
+ blk_rq_sectors(rq)));
/* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */
host_dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
@@ -970,8 +970,8 @@ static struct block_device_operations sd_fops = {
static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
{
- u64 start_lba = scmd->request->sector;
- u64 end_lba = scmd->request->sector + (scsi_bufflen(scmd) / 512);
+ u64 start_lba = blk_rq_pos(scmd->request);
+ u64 end_lba = blk_rq_pos(scmd->request) + (scsi_bufflen(scmd) / 512);
u64 bad_lba;
int info_valid;
diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c
index 184dff4..82f14a9 100644
--- a/drivers/scsi/sd_dif.c
+++ b/drivers/scsi/sd_dif.c
@@ -507,7 +507,7 @@ void sd_dif_complete(struct scsi_cmnd *scmd, unsigned int good_bytes)
sector_sz = scmd->device->sector_size;
sectors = good_bytes / sector_sz;
- phys = scmd->request->sector & 0xffffffff;
+ phys = blk_rq_pos(scmd->request) & 0xffffffff;
if (sector_sz == 4096)
phys >>= 3;
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 0e1a0f2..fddba53 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -292,7 +292,8 @@ static int sr_done(struct scsi_cmnd *SCpnt)
if (cd->device->sector_size == 2048)
error_sector <<= 2;
error_sector &= ~(block_sectors - 1);
- good_bytes = (error_sector - SCpnt->request->sector) << 9;
+ good_bytes = (error_sector -
+ blk_rq_pos(SCpnt->request)) << 9;
if (good_bytes < 0 || good_bytes >= this_count)
good_bytes = 0;
/*
@@ -349,8 +350,8 @@ static int sr_prep_fn(struct request_queue *q, struct request *rq)
cd->disk->disk_name, block));
if (!cd->device || !scsi_device_online(cd->device)) {
- SCSI_LOG_HLQUEUE(2, printk("Finishing %ld sectors\n",
- rq->nr_sectors));
+ SCSI_LOG_HLQUEUE(2, printk("Finishing %u sectors\n",
+ blk_rq_sectors(rq)));
SCSI_LOG_HLQUEUE(2, printk("Retry with 0x%p\n", SCpnt));
goto out;
}
@@ -413,7 +414,7 @@ static int sr_prep_fn(struct request_queue *q, struct request *rq)
/*
* request doesn't start on hw block boundary, add scatter pads
*/
- if (((unsigned int)rq->sector % (s_size >> 9)) ||
+ if (((unsigned int)blk_rq_pos(rq) % (s_size >> 9)) ||
(scsi_bufflen(SCpnt) % s_size)) {
scmd_printk(KERN_NOTICE, SCpnt, "unaligned transfer\n");
goto out;
@@ -422,14 +423,14 @@ static int sr_prep_fn(struct request_queue *q, struct request *rq)
this_count = (scsi_bufflen(SCpnt) >> 9) / (s_size >> 9);
- SCSI_LOG_HLQUEUE(2, printk("%s : %s %d/%ld 512 byte blocks.\n",
+ SCSI_LOG_HLQUEUE(2, printk("%s : %s %d/%u 512 byte blocks.\n",
cd->cdi.name,
(rq_data_dir(rq) == WRITE) ?
"writing" : "reading",
- this_count, rq->nr_sectors));
+ this_count, blk_rq_sectors(rq)));
SCpnt->cmnd[1] = 0;
- block = (unsigned int)rq->sector / (s_size >> 9);
+ block = (unsigned int)blk_rq_pos(rq) / (s_size >> 9);
if (this_count > 0xffff) {
this_count = 0xffff;
diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c
index 601e951..54023d4 100644
--- a/drivers/scsi/u14-34f.c
+++ b/drivers/scsi/u14-34f.c
@@ -1306,7 +1306,7 @@ static int u14_34f_queuecommand(struct scsi_cmnd *SCpnt, void (*done)(struct scs
if (linked_comm && SCpnt->device->queue_depth > 2
&& TLDEV(SCpnt->device->type)) {
HD(j)->cp_stat[i] = READY;
- flush_dev(SCpnt->device, SCpnt->request->sector, j, FALSE);
+ flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), j, FALSE);
return 0;
}
@@ -1610,11 +1610,13 @@ static int reorder(unsigned int j, unsigned long cursec,
if (!(cpp->xdir == DTD_IN)) input_only = FALSE;
- if (SCpnt->request->sector < minsec) minsec = SCpnt->request->sector;
- if (SCpnt->request->sector > maxsec) maxsec = SCpnt->request->sector;
+ if (blk_rq_pos(SCpnt->request) < minsec)
+ minsec = blk_rq_pos(SCpnt->request);
+ if (blk_rq_pos(SCpnt->request) > maxsec)
+ maxsec = blk_rq_pos(SCpnt->request);
- sl[n] = SCpnt->request->sector;
- ioseek += SCpnt->request->nr_sectors;
+ sl[n] = blk_rq_pos(SCpnt->request);
+ ioseek += blk_rq_sectors(SCpnt->request);
if (!n) continue;
@@ -1642,7 +1644,7 @@ static int reorder(unsigned int j, unsigned long cursec,
if (!input_only) for (n = 0; n < n_ready; n++) {
k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
- ll[n] = SCpnt->request->nr_sectors; pl[n] = SCpnt->serial_number;
+ ll[n] = blk_rq_sectors(SCpnt->request); pl[n] = SCpnt->serial_number;
if (!n) continue;
@@ -1666,12 +1668,12 @@ static int reorder(unsigned int j, unsigned long cursec,
if (link_statistics && (overlap || !(flushcount % link_statistics)))
for (n = 0; n < n_ready; n++) {
k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
- printk("%s %d.%d:%d pid %ld mb %d fc %d nr %d sec %ld ns %ld"\
+ printk("%s %d.%d:%d pid %ld mb %d fc %d nr %d sec %ld ns %u"\
" cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n",
(ihdlr ? "ihdlr" : "qcomm"), SCpnt->channel, SCpnt->target,
SCpnt->lun, SCpnt->serial_number, k, flushcount, n_ready,
- SCpnt->request->sector, SCpnt->request->nr_sectors, cursec,
- YESNO(s), YESNO(r), YESNO(rev), YESNO(input_only),
+ blk_rq_pos(SCpnt->request), blk_rq_sectors(SCpnt->request),
+ cursec, YESNO(s), YESNO(r), YESNO(rev), YESNO(input_only),
YESNO(overlap), cpp->xdir);
}
#endif
@@ -1799,7 +1801,7 @@ static irqreturn_t ihdlr(unsigned int j)
if (linked_comm && SCpnt->device->queue_depth > 2
&& TLDEV(SCpnt->device->type))
- flush_dev(SCpnt->device, SCpnt->request->sector, j, TRUE);
+ flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), j, TRUE);
tstatus = status_byte(spp->target_status);
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index 43b50d3..3878d1d 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -270,7 +270,7 @@ static inline unsigned char scsi_get_prot_type(struct scsi_cmnd *scmd)
static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd)
{
- return scmd->request->sector;
+ return blk_rq_pos(scmd->request);
}
static inline unsigned scsi_prot_sg_count(struct scsi_cmnd *cmd)
--
1.6.0.2
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH 06/10] ide: convert to rq pos and nr_sectors accessors
2009-04-29 9:13 ` Tejun Heo
@ 2009-04-29 9:13 ` Tejun Heo
-1 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 9:13 UTC (permalink / raw)
To: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petko
Cc: Tejun Heo
ide doesn't manipulate request fields anymore and thus all hard and
their soft equivalents are always equal. Convert all references to
accessors.
[ Impact: use pos and nr_sectors accessors ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
---
drivers/ide/ide-cd.c | 8 ++++----
drivers/ide/ide-disk.c | 8 ++++----
drivers/ide/ide-dma.c | 2 +-
drivers/ide/ide-floppy.c | 6 +++---
drivers/ide/ide-io.c | 4 ++--
drivers/ide/ide-lib.c | 2 +-
drivers/ide/ide-tape.c | 6 +++---
drivers/ide/ide-taskfile.c | 2 +-
drivers/ide/pdc202xx_old.c | 2 +-
drivers/ide/tc86c001.c | 2 +-
drivers/ide/tx4939ide.c | 2 +-
11 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 182320d..eb4f3dc 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -775,8 +775,8 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
}
/* fs requests *must* be hardware frame aligned */
- if ((rq->nr_sectors & (sectors_per_frame - 1)) ||
- (rq->sector & (sectors_per_frame - 1)))
+ if ((blk_rq_sectors(rq) & (sectors_per_frame - 1)) ||
+ (blk_rq_pos(rq) & (sectors_per_frame - 1)))
return ide_stopped;
/* use DMA, if possible */
@@ -868,8 +868,8 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
cmd.rq = rq;
if (blk_fs_request(rq) || rq->data_len) {
- ide_init_sg_cmd(&cmd, blk_fs_request(rq) ? (rq->nr_sectors << 9)
- : rq->data_len);
+ ide_init_sg_cmd(&cmd, blk_fs_request(rq) ?
+ (blk_rq_sectors(rq) << 9) : rq->data_len);
ide_map_sg(drive, &cmd);
}
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index c243880..ad18e14 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -82,7 +82,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
sector_t block)
{
ide_hwif_t *hwif = drive->hwif;
- u16 nsectors = (u16)rq->nr_sectors;
+ u16 nsectors = (u16)blk_rq_sectors(rq);
u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48);
u8 dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
struct ide_cmd cmd;
@@ -90,7 +90,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
ide_startstop_t rc;
if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && lba48 && dma) {
- if (block + rq->nr_sectors > 1ULL << 28)
+ if (block + blk_rq_sectors(rq) > 1ULL << 28)
dma = 0;
else
lba48 = 0;
@@ -195,9 +195,9 @@ static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
ledtrig_ide_activity();
- pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n",
+ pr_debug("%s: %sing: block=%llu, sectors=%u, buffer=0x%08lx\n",
drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
- (unsigned long long)block, rq->nr_sectors,
+ (unsigned long long)block, blk_rq_sectors(rq),
(unsigned long)rq->buffer);
if (hwif->rw_disk)
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index d9123ec..001f68f 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -103,7 +103,7 @@ ide_startstop_t ide_dma_intr(ide_drive_t *drive)
ide_finish_cmd(drive, cmd, stat);
else
ide_complete_rq(drive, 0,
- cmd->rq->nr_sectors << 9);
+ blk_rq_sectors(cmd->rq) << 9);
return ide_stopped;
}
printk(KERN_ERR "%s: %s: bad DMA status (0x%02x)\n",
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 537b7c5..1c460bd 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -194,7 +194,7 @@ static void idefloppy_create_rw_cmd(ide_drive_t *drive,
{
struct ide_disk_obj *floppy = drive->driver_data;
int block = sector / floppy->bs_factor;
- int blocks = rq->nr_sectors / floppy->bs_factor;
+ int blocks = blk_rq_sectors(rq) / floppy->bs_factor;
int cmd = rq_data_dir(rq);
ide_debug_log(IDE_DBG_FUNC, "block: %d, blocks: %d", block, blocks);
@@ -259,8 +259,8 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
goto out_end;
}
if (blk_fs_request(rq)) {
- if (((long)rq->sector % floppy->bs_factor) ||
- (rq->nr_sectors % floppy->bs_factor)) {
+ if (((long)blk_rq_pos(rq) % floppy->bs_factor) ||
+ (blk_rq_sectors(rq) % floppy->bs_factor)) {
printk(KERN_ERR PFX "%s: unsupported r/w rq size\n",
drive->name);
goto out_end;
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index df23bcb..59799ca 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -279,7 +279,7 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive,
if (cmd) {
if (cmd->protocol == ATA_PROT_PIO) {
- ide_init_sg_cmd(cmd, rq->nr_sectors << 9);
+ ide_init_sg_cmd(cmd, blk_rq_sectors(rq) << 9);
ide_map_sg(drive, cmd);
}
@@ -387,7 +387,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
drv = *(struct ide_driver **)rq->rq_disk->private_data;
- return drv->do_request(drive, rq, rq->sector);
+ return drv->do_request(drive, rq, blk_rq_pos(rq));
}
return do_special(drive);
kill_rq:
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 56ff8c4..05b7fbc 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -114,7 +114,7 @@ static void ide_dump_ata_error(ide_drive_t *drive, u8 err)
if (rq)
printk(KERN_CONT ", sector=%llu",
- (unsigned long long)rq->sector);
+ (unsigned long long)blk_rq_pos(rq));
}
printk(KERN_CONT "\n");
}
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 3813a0e..e166045 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -586,7 +586,7 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape,
struct ide_atapi_pc *pc, struct request *rq,
u8 opcode)
{
- unsigned int length = rq->nr_sectors;
+ unsigned int length = blk_rq_sectors(rq);
ide_init_pc(pc);
put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
@@ -617,8 +617,8 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
struct ide_cmd cmd;
u8 stat;
- debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu\n"
- (unsigned long long)rq->sector, rq->nr_sectors);
+ debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %u\n"
+ (unsigned long long)blk_rq_pos(rq), blk_rq_sectors(rq));
if (!(blk_special_request(rq) || blk_sense_request(rq))) {
/* We do not support buffer cache originated requests. */
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index f400eb4..a0c3e1b 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -385,7 +385,7 @@ out_end:
if ((cmd->tf_flags & IDE_TFLAG_FS) == 0)
ide_finish_cmd(drive, cmd, stat);
else
- ide_complete_rq(drive, 0, cmd->rq->nr_sectors << 9);
+ ide_complete_rq(drive, 0, blk_rq_sectors(cmd->rq) << 9);
return ide_stopped;
out_err:
ide_error_cmd(drive, cmd);
diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
index 248a54b..c2a16a8 100644
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -177,7 +177,7 @@ static void pdc202xx_dma_start(ide_drive_t *drive)
u8 clock = inb(high_16 + 0x11);
outb(clock | (hwif->channel ? 0x08 : 0x02), high_16 + 0x11);
- word_count = (rq->nr_sectors << 8);
+ word_count = (blk_rq_sectors(rq) << 8);
word_count = (rq_data_dir(rq) == READ) ?
word_count | 0x05000000 :
word_count | 0x06000000;
diff --git a/drivers/ide/tc86c001.c b/drivers/ide/tc86c001.c
index b4cf42d..05a93d6 100644
--- a/drivers/ide/tc86c001.c
+++ b/drivers/ide/tc86c001.c
@@ -112,7 +112,7 @@ static void tc86c001_dma_start(ide_drive_t *drive)
ide_hwif_t *hwif = drive->hwif;
unsigned long sc_base = hwif->config_data;
unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04);
- unsigned long nsectors = hwif->rq->nr_sectors;
+ unsigned long nsectors = blk_rq_sectors(hwif->rq);
/*
* We have to manually load the sector count and size into
diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c
index 564422d..5ca7622 100644
--- a/drivers/ide/tx4939ide.c
+++ b/drivers/ide/tx4939ide.c
@@ -307,7 +307,7 @@ static int tx4939ide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
tx4939ide_writew(SECTOR_SIZE / 2, base, drive->dn ?
TX4939IDE_Xfer_Cnt_2 : TX4939IDE_Xfer_Cnt_1);
- tx4939ide_writew(cmd->rq->nr_sectors, base, TX4939IDE_Sec_Cnt);
+ tx4939ide_writew(blk_rq_sectors(cmd->rq), base, TX4939IDE_Sec_Cnt);
return 0;
}
--
1.6.0.2
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH 06/10] ide: convert to rq pos and nr_sectors accessors
@ 2009-04-29 9:13 ` Tejun Heo
0 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 9:13 UTC (permalink / raw)
To: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, grant.likely, paul.clements,
jesper.juhl, tim, jeremy, adrian, oakad, dwmw2, schwidefsky,
ballabio_dario, davem, rusty, Markus.Lidel, bharrosh
Cc: Tejun Heo
ide doesn't manipulate request fields anymore and thus all hard and
their soft equivalents are always equal. Convert all references to
accessors.
[ Impact: use pos and nr_sectors accessors ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
---
drivers/ide/ide-cd.c | 8 ++++----
drivers/ide/ide-disk.c | 8 ++++----
drivers/ide/ide-dma.c | 2 +-
drivers/ide/ide-floppy.c | 6 +++---
drivers/ide/ide-io.c | 4 ++--
drivers/ide/ide-lib.c | 2 +-
drivers/ide/ide-tape.c | 6 +++---
drivers/ide/ide-taskfile.c | 2 +-
drivers/ide/pdc202xx_old.c | 2 +-
drivers/ide/tc86c001.c | 2 +-
drivers/ide/tx4939ide.c | 2 +-
11 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 182320d..eb4f3dc 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -775,8 +775,8 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
}
/* fs requests *must* be hardware frame aligned */
- if ((rq->nr_sectors & (sectors_per_frame - 1)) ||
- (rq->sector & (sectors_per_frame - 1)))
+ if ((blk_rq_sectors(rq) & (sectors_per_frame - 1)) ||
+ (blk_rq_pos(rq) & (sectors_per_frame - 1)))
return ide_stopped;
/* use DMA, if possible */
@@ -868,8 +868,8 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
cmd.rq = rq;
if (blk_fs_request(rq) || rq->data_len) {
- ide_init_sg_cmd(&cmd, blk_fs_request(rq) ? (rq->nr_sectors << 9)
- : rq->data_len);
+ ide_init_sg_cmd(&cmd, blk_fs_request(rq) ?
+ (blk_rq_sectors(rq) << 9) : rq->data_len);
ide_map_sg(drive, &cmd);
}
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index c243880..ad18e14 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -82,7 +82,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
sector_t block)
{
ide_hwif_t *hwif = drive->hwif;
- u16 nsectors = (u16)rq->nr_sectors;
+ u16 nsectors = (u16)blk_rq_sectors(rq);
u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48);
u8 dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
struct ide_cmd cmd;
@@ -90,7 +90,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
ide_startstop_t rc;
if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && lba48 && dma) {
- if (block + rq->nr_sectors > 1ULL << 28)
+ if (block + blk_rq_sectors(rq) > 1ULL << 28)
dma = 0;
else
lba48 = 0;
@@ -195,9 +195,9 @@ static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
ledtrig_ide_activity();
- pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n",
+ pr_debug("%s: %sing: block=%llu, sectors=%u, buffer=0x%08lx\n",
drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
- (unsigned long long)block, rq->nr_sectors,
+ (unsigned long long)block, blk_rq_sectors(rq),
(unsigned long)rq->buffer);
if (hwif->rw_disk)
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index d9123ec..001f68f 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -103,7 +103,7 @@ ide_startstop_t ide_dma_intr(ide_drive_t *drive)
ide_finish_cmd(drive, cmd, stat);
else
ide_complete_rq(drive, 0,
- cmd->rq->nr_sectors << 9);
+ blk_rq_sectors(cmd->rq) << 9);
return ide_stopped;
}
printk(KERN_ERR "%s: %s: bad DMA status (0x%02x)\n",
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 537b7c5..1c460bd 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -194,7 +194,7 @@ static void idefloppy_create_rw_cmd(ide_drive_t *drive,
{
struct ide_disk_obj *floppy = drive->driver_data;
int block = sector / floppy->bs_factor;
- int blocks = rq->nr_sectors / floppy->bs_factor;
+ int blocks = blk_rq_sectors(rq) / floppy->bs_factor;
int cmd = rq_data_dir(rq);
ide_debug_log(IDE_DBG_FUNC, "block: %d, blocks: %d", block, blocks);
@@ -259,8 +259,8 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
goto out_end;
}
if (blk_fs_request(rq)) {
- if (((long)rq->sector % floppy->bs_factor) ||
- (rq->nr_sectors % floppy->bs_factor)) {
+ if (((long)blk_rq_pos(rq) % floppy->bs_factor) ||
+ (blk_rq_sectors(rq) % floppy->bs_factor)) {
printk(KERN_ERR PFX "%s: unsupported r/w rq size\n",
drive->name);
goto out_end;
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index df23bcb..59799ca 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -279,7 +279,7 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive,
if (cmd) {
if (cmd->protocol == ATA_PROT_PIO) {
- ide_init_sg_cmd(cmd, rq->nr_sectors << 9);
+ ide_init_sg_cmd(cmd, blk_rq_sectors(rq) << 9);
ide_map_sg(drive, cmd);
}
@@ -387,7 +387,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
drv = *(struct ide_driver **)rq->rq_disk->private_data;
- return drv->do_request(drive, rq, rq->sector);
+ return drv->do_request(drive, rq, blk_rq_pos(rq));
}
return do_special(drive);
kill_rq:
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 56ff8c4..05b7fbc 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -114,7 +114,7 @@ static void ide_dump_ata_error(ide_drive_t *drive, u8 err)
if (rq)
printk(KERN_CONT ", sector=%llu",
- (unsigned long long)rq->sector);
+ (unsigned long long)blk_rq_pos(rq));
}
printk(KERN_CONT "\n");
}
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 3813a0e..e166045 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -586,7 +586,7 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape,
struct ide_atapi_pc *pc, struct request *rq,
u8 opcode)
{
- unsigned int length = rq->nr_sectors;
+ unsigned int length = blk_rq_sectors(rq);
ide_init_pc(pc);
put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
@@ -617,8 +617,8 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
struct ide_cmd cmd;
u8 stat;
- debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu\n"
- (unsigned long long)rq->sector, rq->nr_sectors);
+ debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %u\n"
+ (unsigned long long)blk_rq_pos(rq), blk_rq_sectors(rq));
if (!(blk_special_request(rq) || blk_sense_request(rq))) {
/* We do not support buffer cache originated requests. */
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index f400eb4..a0c3e1b 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -385,7 +385,7 @@ out_end:
if ((cmd->tf_flags & IDE_TFLAG_FS) == 0)
ide_finish_cmd(drive, cmd, stat);
else
- ide_complete_rq(drive, 0, cmd->rq->nr_sectors << 9);
+ ide_complete_rq(drive, 0, blk_rq_sectors(cmd->rq) << 9);
return ide_stopped;
out_err:
ide_error_cmd(drive, cmd);
diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
index 248a54b..c2a16a8 100644
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -177,7 +177,7 @@ static void pdc202xx_dma_start(ide_drive_t *drive)
u8 clock = inb(high_16 + 0x11);
outb(clock | (hwif->channel ? 0x08 : 0x02), high_16 + 0x11);
- word_count = (rq->nr_sectors << 8);
+ word_count = (blk_rq_sectors(rq) << 8);
word_count = (rq_data_dir(rq) == READ) ?
word_count | 0x05000000 :
word_count | 0x06000000;
diff --git a/drivers/ide/tc86c001.c b/drivers/ide/tc86c001.c
index b4cf42d..05a93d6 100644
--- a/drivers/ide/tc86c001.c
+++ b/drivers/ide/tc86c001.c
@@ -112,7 +112,7 @@ static void tc86c001_dma_start(ide_drive_t *drive)
ide_hwif_t *hwif = drive->hwif;
unsigned long sc_base = hwif->config_data;
unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04);
- unsigned long nsectors = hwif->rq->nr_sectors;
+ unsigned long nsectors = blk_rq_sectors(hwif->rq);
/*
* We have to manually load the sector count and size into
diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c
index 564422d..5ca7622 100644
--- a/drivers/ide/tx4939ide.c
+++ b/drivers/ide/tx4939ide.c
@@ -307,7 +307,7 @@ static int tx4939ide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
tx4939ide_writew(SECTOR_SIZE / 2, base, drive->dn ?
TX4939IDE_Xfer_Cnt_2 : TX4939IDE_Xfer_Cnt_1);
- tx4939ide_writew(cmd->rq->nr_sectors, base, TX4939IDE_Sec_Cnt);
+ tx4939ide_writew(blk_rq_sectors(cmd->rq), base, TX4939IDE_Sec_Cnt);
return 0;
}
--
1.6.0.2
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH 07/10] block: drop request->hard_* and *nr_sectors
2009-04-29 9:13 ` Tejun Heo
@ 2009-04-29 9:13 ` Tejun Heo
-1 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 9:13 UTC (permalink / raw)
To: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petko
Cc: Tejun Heo
struct request has had a few different ways to represent some
properties of a request. ->hard_* represent block layer's view of the
request progress (completion cursor) and the ones without the prefix
are supposed to represent the issue cursor and allowed to be updated
as necessary by the low level drivers. The thing is that as block
layer supports partial completion, the two cursors really aren't
necessary and only cause confusion. In addition, manual management of
request detail from low level drivers is cumbersome and error-prone at
the very least.
Another interesting duplicate fields are rq->[hard_]nr_sectors and
rq->{hard_cur|current}_nr_sectors against rq->data_len and
rq->bio->bi_size. This is more convoluted than the hard_ case.
rq->[hard_]nr_sectors are initialized for requests with bio but
blk_rq_bytes() uses it only for !pc requests. rq->data_len is
initialized for all request but blk_rq_bytes() uses it only for pc
requests. This causes good amount of confusion throughout block layer
and its drivers and determining the request length has been a bit of
black magic which may or may not work depending on circumstances and
what the specific LLD is actually doing.
rq->{hard_cur|current}_nr_sectors represent the number of sectors in
the contiguous data area at the front. This is mainly used by drivers
which transfers data by walking request segment-by-segment. This
value always equals rq->bio->bi_size >> 9. However, data length for
pc requests may not be multiple of 512 bytes and using this field
becomes a bit confusing.
In general, having multiple fields to represent the same property
leads only to confusion and subtle bugs. With recent block low level
driver cleanups, no driver is accessing or manipulating these
duplicate fields directly. Drop all the duplicates. Now rq->sector
means the current sector, rq->data_len the current total length and
rq->bio->bi_size the current segment length. Everything else is
defined in terms of these three and available only through accessors.
* blk_recalc_rq_sectors() is collapsed into blk_update_request() and
now handles pc and fs requests equally other than rq->sector update.
This means that now pc requests can use partial completion too (no
in-kernel user yet tho).
* bio_cur_sectors() is replaced with bio_cur_bytes() as block layer
now uses byte count as the primary data length.
* blk_rq_pos() is now guranteed to be always correct. In-block users
converted.
* blk_rq_bytes() is now guaranteed to be always valid as is
blk_rq_sectors(). In-block users converted.
* blk_rq_sectors() is now guaranteed to equal blk_rq_bytes() >> 9.
More convenient one is used.
[ Impact: API cleanup, single way to represent one property of a request ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Boaz Harrosh <bharrosh@panasas.com>
---
block/blk-core.c | 81 +++++++++++++++++-----------------------------
block/blk-merge.c | 36 ++------------------
block/blk.h | 1 -
block/cfq-iosched.c | 10 +++---
include/linux/bio.h | 6 ++--
include/linux/blkdev.h | 37 +++++++++------------
include/linux/elevator.h | 2 +-
kernel/trace/blktrace.c | 16 ++++----
8 files changed, 67 insertions(+), 122 deletions(-)
diff --git a/block/blk-core.c b/block/blk-core.c
index 82dc206..3596ca7 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -127,7 +127,7 @@ void blk_rq_init(struct request_queue *q, struct request *rq)
INIT_LIST_HEAD(&rq->timeout_list);
rq->cpu = -1;
rq->q = q;
- rq->sector = rq->hard_sector = (sector_t) -1;
+ rq->sector = (sector_t) -1;
INIT_HLIST_NODE(&rq->hash);
RB_CLEAR_NODE(&rq->rb_node);
rq->cmd = rq->__cmd;
@@ -189,8 +189,7 @@ void blk_dump_rq_flags(struct request *rq, char *msg)
(unsigned long long)blk_rq_pos(rq),
blk_rq_sectors(rq), blk_rq_cur_sectors(rq));
printk(KERN_INFO " bio %p, biotail %p, buffer %p, len %u\n",
- rq->bio, rq->biotail,
- rq->buffer, rq->data_len);
+ rq->bio, rq->biotail, rq->buffer, blk_rq_bytes(rq));
if (blk_pc_request(rq)) {
printk(KERN_INFO " cdb: ");
@@ -1096,7 +1095,7 @@ void init_request_from_bio(struct request *req, struct bio *bio)
req->cmd_flags |= REQ_NOIDLE;
req->errors = 0;
- req->hard_sector = req->sector = bio->bi_sector;
+ req->sector = bio->bi_sector;
req->ioprio = bio_prio(bio);
blk_rq_bio_prep(req->q, req, bio);
}
@@ -1113,14 +1112,13 @@ static inline bool queue_should_plug(struct request_queue *q)
static int __make_request(struct request_queue *q, struct bio *bio)
{
struct request *req;
- int el_ret, nr_sectors;
+ int el_ret;
+ unsigned int bytes = bio->bi_size;
const unsigned short prio = bio_prio(bio);
const int sync = bio_sync(bio);
const int unplug = bio_unplug(bio);
int rw_flags;
- nr_sectors = bio_sectors(bio);
-
/*
* low level driver can indicate that it wants pages above a
* certain limit bounced to low memory (ie for highmem, or even
@@ -1145,7 +1143,7 @@ static int __make_request(struct request_queue *q, struct bio *bio)
req->biotail->bi_next = bio;
req->biotail = bio;
- req->nr_sectors = req->hard_nr_sectors += nr_sectors;
+ req->data_len += bytes;
req->ioprio = ioprio_best(req->ioprio, prio);
if (!blk_rq_cpu_valid(req))
req->cpu = bio->bi_comp_cpu;
@@ -1171,10 +1169,8 @@ static int __make_request(struct request_queue *q, struct bio *bio)
* not touch req->buffer either...
*/
req->buffer = bio_data(bio);
- req->current_nr_sectors = bio_cur_sectors(bio);
- req->hard_cur_sectors = req->current_nr_sectors;
- req->sector = req->hard_sector = bio->bi_sector;
- req->nr_sectors = req->hard_nr_sectors += nr_sectors;
+ req->sector = bio->bi_sector;
+ req->data_len += bytes;
req->ioprio = ioprio_best(req->ioprio, prio);
if (!blk_rq_cpu_valid(req))
req->cpu = bio->bi_comp_cpu;
@@ -1557,7 +1553,7 @@ EXPORT_SYMBOL(submit_bio);
int blk_rq_check_limits(struct request_queue *q, struct request *rq)
{
if (blk_rq_sectors(rq) > q->max_sectors ||
- rq->data_len > q->max_hw_sectors << 9) {
+ blk_rq_bytes(rq) > q->max_hw_sectors << 9) {
printk(KERN_ERR "%s: over max size limit.\n", __func__);
return -EIO;
}
@@ -1675,35 +1671,6 @@ static void blk_account_io_done(struct request *req)
}
}
-/**
- * blk_rq_bytes - Returns bytes left to complete in the entire request
- * @rq: the request being processed
- **/
-unsigned int blk_rq_bytes(struct request *rq)
-{
- if (blk_fs_request(rq))
- return blk_rq_sectors(rq) << 9;
-
- return rq->data_len;
-}
-EXPORT_SYMBOL_GPL(blk_rq_bytes);
-
-/**
- * blk_rq_cur_bytes - Returns bytes left to complete in the current segment
- * @rq: the request being processed
- **/
-unsigned int blk_rq_cur_bytes(struct request *rq)
-{
- if (blk_fs_request(rq))
- return rq->current_nr_sectors << 9;
-
- if (rq->bio)
- return rq->bio->bi_size;
-
- return rq->data_len;
-}
-EXPORT_SYMBOL_GPL(blk_rq_cur_bytes);
-
struct request *elv_next_request(struct request_queue *q)
{
struct request *rq;
@@ -1736,7 +1703,7 @@ struct request *elv_next_request(struct request_queue *q)
if (rq->cmd_flags & REQ_DONTPREP)
break;
- if (q->dma_drain_size && rq->data_len) {
+ if (q->dma_drain_size && blk_rq_bytes(rq)) {
/*
* make sure space for the drain appears we
* know we can do this because max_hw_segments
@@ -1759,7 +1726,7 @@ struct request *elv_next_request(struct request_queue *q)
* avoid resource deadlock. REQ_STARTED will
* prevent other fs requests from passing this one.
*/
- if (q->dma_drain_size && rq->data_len &&
+ if (q->dma_drain_size && blk_rq_bytes(rq) &&
!(rq->cmd_flags & REQ_DONTPREP)) {
/*
* remove the space for the drain we added
@@ -1911,8 +1878,7 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
* can find how many bytes remain in the request
* later.
*/
- req->nr_sectors = req->hard_nr_sectors = 0;
- req->current_nr_sectors = req->hard_cur_sectors = 0;
+ req->data_len = 0;
return false;
}
@@ -1926,8 +1892,25 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
bio_iovec(bio)->bv_len -= nr_bytes;
}
- blk_recalc_rq_sectors(req, total_bytes >> 9);
+ req->data_len -= total_bytes;
+ req->buffer = bio_data(req->bio);
+
+ /* update sector only for requests with clear definition of sector */
+ if (blk_fs_request(req) || blk_discard_rq(req))
+ req->sector += total_bytes >> 9;
+
+ /*
+ * If total number of sectors is less than the first segment
+ * size, something has gone terribly wrong.
+ */
+ if (blk_rq_bytes(req) < blk_rq_cur_bytes(req)) {
+ printk(KERN_ERR "blk: request botched\n");
+ req->data_len = blk_rq_cur_bytes(req);
+ }
+
+ /* recalculate the number of segments */
blk_recalc_rq_segments(req);
+
return true;
}
EXPORT_SYMBOL_GPL(blk_update_request);
@@ -2049,11 +2032,7 @@ void blk_rq_bio_prep(struct request_queue *q, struct request *rq,
rq->nr_phys_segments = bio_phys_segments(q, bio);
rq->buffer = bio_data(bio);
}
- rq->current_nr_sectors = bio_cur_sectors(bio);
- rq->hard_cur_sectors = rq->current_nr_sectors;
- rq->hard_nr_sectors = rq->nr_sectors = bio_sectors(bio);
rq->data_len = bio->bi_size;
-
rq->bio = rq->biotail = bio;
if (bio->bi_bdev)
diff --git a/block/blk-merge.c b/block/blk-merge.c
index bf62a87..b8df66a 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -9,35 +9,6 @@
#include "blk.h"
-void blk_recalc_rq_sectors(struct request *rq, int nsect)
-{
- if (blk_fs_request(rq) || blk_discard_rq(rq)) {
- rq->hard_sector += nsect;
- rq->hard_nr_sectors -= nsect;
-
- /*
- * Move the I/O submission pointers ahead if required.
- */
- if ((rq->nr_sectors >= rq->hard_nr_sectors) &&
- (rq->sector <= rq->hard_sector)) {
- rq->sector = rq->hard_sector;
- rq->nr_sectors = rq->hard_nr_sectors;
- rq->hard_cur_sectors = bio_cur_sectors(rq->bio);
- rq->current_nr_sectors = rq->hard_cur_sectors;
- rq->buffer = bio_data(rq->bio);
- }
-
- /*
- * if total number of sectors is less than the first segment
- * size, something has gone terribly wrong
- */
- if (rq->nr_sectors < rq->current_nr_sectors) {
- printk(KERN_ERR "blk: request botched\n");
- rq->nr_sectors = rq->current_nr_sectors;
- }
- }
-}
-
static unsigned int __blk_recalc_rq_segments(struct request_queue *q,
struct bio *bio)
{
@@ -199,8 +170,9 @@ new_segment:
if (unlikely(rq->cmd_flags & REQ_COPY_USER) &&
- (rq->data_len & q->dma_pad_mask)) {
- unsigned int pad_len = (q->dma_pad_mask & ~rq->data_len) + 1;
+ (blk_rq_bytes(rq) & q->dma_pad_mask)) {
+ unsigned int pad_len =
+ (q->dma_pad_mask & ~blk_rq_bytes(rq)) + 1;
sg->length += pad_len;
rq->extra_len += pad_len;
@@ -398,7 +370,7 @@ static int attempt_merge(struct request_queue *q, struct request *req,
req->biotail->bi_next = next->bio;
req->biotail = next->biotail;
- req->nr_sectors = req->hard_nr_sectors += next->hard_nr_sectors;
+ req->data_len += blk_rq_bytes(next);
elv_merge_requests(q, req, next);
diff --git a/block/blk.h b/block/blk.h
index 5111559..ab54529 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -101,7 +101,6 @@ int ll_front_merge_fn(struct request_queue *q, struct request *req,
int attempt_back_merge(struct request_queue *q, struct request *rq);
int attempt_front_merge(struct request_queue *q, struct request *rq);
void blk_recalc_rq_segments(struct request *rq);
-void blk_recalc_rq_sectors(struct request *rq, int nsect);
void blk_queue_congestion_threshold(struct request_queue *q);
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index db4d990..99ac430 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -579,9 +579,9 @@ cfq_prio_tree_lookup(struct cfq_data *cfqd, struct rb_root *root,
* Sort strictly based on sector. Smallest to the left,
* largest to the right.
*/
- if (sector > cfqq->next_rq->sector)
+ if (sector > blk_rq_pos(cfqq->next_rq))
n = &(*p)->rb_right;
- else if (sector < cfqq->next_rq->sector)
+ else if (sector < blk_rq_pos(cfqq->next_rq))
n = &(*p)->rb_left;
else
break;
@@ -611,8 +611,8 @@ static void cfq_prio_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq)
return;
cfqq->p_root = &cfqd->prio_trees[cfqq->org_ioprio];
- __cfqq = cfq_prio_tree_lookup(cfqd, cfqq->p_root, cfqq->next_rq->sector,
- &parent, &p);
+ __cfqq = cfq_prio_tree_lookup(cfqd, cfqq->p_root,
+ blk_rq_pos(cfqq->next_rq), &parent, &p);
if (!__cfqq) {
rb_link_node(&cfqq->p_node, parent, p);
rb_insert_color(&cfqq->p_node, cfqq->p_root);
@@ -996,7 +996,7 @@ static struct cfq_queue *cfqq_close(struct cfq_data *cfqd,
if (cfq_rq_close(cfqd, __cfqq->next_rq))
return __cfqq;
- if (__cfqq->next_rq->sector < sector)
+ if (blk_rq_pos(__cfqq->next_rq) < sector)
node = rb_next(&__cfqq->p_node);
else
node = rb_prev(&__cfqq->p_node);
diff --git a/include/linux/bio.h b/include/linux/bio.h
index f37ca8c..d30ec6f 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -218,12 +218,12 @@ struct bio {
#define bio_sectors(bio) ((bio)->bi_size >> 9)
#define bio_empty_barrier(bio) (bio_barrier(bio) && !bio_has_data(bio) && !bio_discard(bio))
-static inline unsigned int bio_cur_sectors(struct bio *bio)
+static inline unsigned int bio_cur_bytes(struct bio *bio)
{
if (bio->bi_vcnt)
- return bio_iovec(bio)->bv_len >> 9;
+ return bio_iovec(bio)->bv_len;
else /* dataless requests such as discard */
- return bio->bi_size >> 9;
+ return bio->bi_size;
}
static inline void *bio_data(struct bio *bio)
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 1e18ef7..943cbfe 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -166,19 +166,8 @@ struct request {
enum rq_cmd_type_bits cmd_type;
unsigned long atomic_flags;
- /* Maintain bio traversal state for part by part I/O submission.
- * hard_* are block layer internals, no driver should touch them!
- */
-
- sector_t sector; /* next sector to submit */
- sector_t hard_sector; /* next sector to complete */
- unsigned long nr_sectors; /* no. of sectors left to submit */
- unsigned long hard_nr_sectors; /* no. of sectors left to complete */
- /* no. of sectors left to submit in the current segment */
- unsigned int current_nr_sectors;
-
- /* no. of sectors left to complete in the current segment */
- unsigned int hard_cur_sectors;
+ sector_t sector; /* sector cursor */
+ unsigned int data_len; /* total data len, don't access directly */
struct bio *bio;
struct bio *biotail;
@@ -226,7 +215,6 @@ struct request {
unsigned char __cmd[BLK_MAX_CDB];
unsigned char *cmd;
- unsigned int data_len;
unsigned int extra_len; /* length of alignment and padding */
unsigned int sense_len;
unsigned int resid_len; /* residual count */
@@ -840,20 +828,27 @@ extern void blkdev_dequeue_request(struct request *req);
*/
static inline sector_t blk_rq_pos(struct request *rq)
{
- return rq->hard_sector;
+ return rq->sector;
+}
+
+static inline unsigned int blk_rq_bytes(struct request *rq)
+{
+ return rq->data_len;
}
-extern unsigned int blk_rq_bytes(struct request *rq);
-extern unsigned int blk_rq_cur_bytes(struct request *rq);
+static inline int blk_rq_cur_bytes(struct request *rq)
+{
+ return rq->bio ? bio_cur_bytes(rq->bio) : 0;
+}
static inline unsigned int blk_rq_sectors(struct request *rq)
{
- return rq->hard_nr_sectors;
+ return blk_rq_bytes(rq) >> 9;
}
static inline unsigned int blk_rq_cur_sectors(struct request *rq)
{
- return rq->hard_cur_sectors;
+ return blk_rq_cur_bytes(rq) >> 9;
}
/*
@@ -928,7 +923,7 @@ static inline void blk_end_request_all(struct request *rq, int error)
*/
static inline bool blk_end_request_cur(struct request *rq, int error)
{
- return blk_end_request(rq, error, rq->hard_cur_sectors << 9);
+ return blk_end_request(rq, error, blk_rq_cur_bytes(rq));
}
/**
@@ -981,7 +976,7 @@ static inline void __blk_end_request_all(struct request *rq, int error)
*/
static inline bool __blk_end_request_cur(struct request *rq, int error)
{
- return __blk_end_request(rq, error, rq->hard_cur_sectors << 9);
+ return __blk_end_request(rq, error, blk_rq_cur_bytes(rq));
}
extern void blk_complete_request(struct request *);
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index c59b769..4e46287 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -171,7 +171,7 @@ enum {
ELV_MQUEUE_MUST,
};
-#define rq_end_sector(rq) ((rq)->sector + (rq)->nr_sectors)
+#define rq_end_sector(rq) (blk_rq_pos(rq) + blk_rq_sectors(rq))
#define rb_entry_rq(node) rb_entry((node), struct request, rb_node)
/*
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index 42f1c11..5708a14 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -642,12 +642,12 @@ static void blk_add_trace_rq(struct request_queue *q, struct request *rq,
if (blk_pc_request(rq)) {
what |= BLK_TC_ACT(BLK_TC_PC);
- __blk_add_trace(bt, 0, rq->data_len, rw, what, rq->errors,
- rq->cmd_len, rq->cmd);
+ __blk_add_trace(bt, 0, blk_rq_bytes(rq), rw,
+ what, rq->errors, rq->cmd_len, rq->cmd);
} else {
what |= BLK_TC_ACT(BLK_TC_FS);
- __blk_add_trace(bt, blk_rq_pos(rq), blk_rq_sectors(rq) << 9,
- rw, what, rq->errors, 0, NULL);
+ __blk_add_trace(bt, blk_rq_pos(rq), blk_rq_bytes(rq), rw,
+ what, rq->errors, 0, NULL);
}
}
@@ -854,11 +854,11 @@ void blk_add_driver_data(struct request_queue *q,
return;
if (blk_pc_request(rq))
- __blk_add_trace(bt, 0, rq->data_len, 0, BLK_TA_DRV_DATA,
- rq->errors, len, data);
+ __blk_add_trace(bt, 0, blk_rq_bytes(rq), 0,
+ BLK_TA_DRV_DATA, rq->errors, len, data);
else
- __blk_add_trace(bt, blk_rq_pos(rq), blk_rq_sectors(rq) << 9,
- 0, BLK_TA_DRV_DATA, rq->errors, len, data);
+ __blk_add_trace(bt, blk_rq_pos(rq), blk_rq_bytes(rq), 0,
+ BLK_TA_DRV_DATA, rq->errors, len, data);
}
EXPORT_SYMBOL_GPL(blk_add_driver_data);
--
1.6.0.2
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH 07/10] block: drop request->hard_* and *nr_sectors
@ 2009-04-29 9:13 ` Tejun Heo
0 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 9:13 UTC (permalink / raw)
To: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, grant.likely, paul.clements,
jesper.juhl, tim, jeremy, adrian, oakad, dwmw2, schwidefsky,
ballabio_dario, davem, rusty, Markus.Lidel, bharrosh
Cc: Tejun Heo
struct request has had a few different ways to represent some
properties of a request. ->hard_* represent block layer's view of the
request progress (completion cursor) and the ones without the prefix
are supposed to represent the issue cursor and allowed to be updated
as necessary by the low level drivers. The thing is that as block
layer supports partial completion, the two cursors really aren't
necessary and only cause confusion. In addition, manual management of
request detail from low level drivers is cumbersome and error-prone at
the very least.
Another interesting duplicate fields are rq->[hard_]nr_sectors and
rq->{hard_cur|current}_nr_sectors against rq->data_len and
rq->bio->bi_size. This is more convoluted than the hard_ case.
rq->[hard_]nr_sectors are initialized for requests with bio but
blk_rq_bytes() uses it only for !pc requests. rq->data_len is
initialized for all request but blk_rq_bytes() uses it only for pc
requests. This causes good amount of confusion throughout block layer
and its drivers and determining the request length has been a bit of
black magic which may or may not work depending on circumstances and
what the specific LLD is actually doing.
rq->{hard_cur|current}_nr_sectors represent the number of sectors in
the contiguous data area at the front. This is mainly used by drivers
which transfers data by walking request segment-by-segment. This
value always equals rq->bio->bi_size >> 9. However, data length for
pc requests may not be multiple of 512 bytes and using this field
becomes a bit confusing.
In general, having multiple fields to represent the same property
leads only to confusion and subtle bugs. With recent block low level
driver cleanups, no driver is accessing or manipulating these
duplicate fields directly. Drop all the duplicates. Now rq->sector
means the current sector, rq->data_len the current total length and
rq->bio->bi_size the current segment length. Everything else is
defined in terms of these three and available only through accessors.
* blk_recalc_rq_sectors() is collapsed into blk_update_request() and
now handles pc and fs requests equally other than rq->sector update.
This means that now pc requests can use partial completion too (no
in-kernel user yet tho).
* bio_cur_sectors() is replaced with bio_cur_bytes() as block layer
now uses byte count as the primary data length.
* blk_rq_pos() is now guranteed to be always correct. In-block users
converted.
* blk_rq_bytes() is now guaranteed to be always valid as is
blk_rq_sectors(). In-block users converted.
* blk_rq_sectors() is now guaranteed to equal blk_rq_bytes() >> 9.
More convenient one is used.
[ Impact: API cleanup, single way to represent one property of a request ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Boaz Harrosh <bharrosh@panasas.com>
---
block/blk-core.c | 81 +++++++++++++++++-----------------------------
block/blk-merge.c | 36 ++------------------
block/blk.h | 1 -
block/cfq-iosched.c | 10 +++---
include/linux/bio.h | 6 ++--
include/linux/blkdev.h | 37 +++++++++------------
include/linux/elevator.h | 2 +-
kernel/trace/blktrace.c | 16 ++++----
8 files changed, 67 insertions(+), 122 deletions(-)
diff --git a/block/blk-core.c b/block/blk-core.c
index 82dc206..3596ca7 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -127,7 +127,7 @@ void blk_rq_init(struct request_queue *q, struct request *rq)
INIT_LIST_HEAD(&rq->timeout_list);
rq->cpu = -1;
rq->q = q;
- rq->sector = rq->hard_sector = (sector_t) -1;
+ rq->sector = (sector_t) -1;
INIT_HLIST_NODE(&rq->hash);
RB_CLEAR_NODE(&rq->rb_node);
rq->cmd = rq->__cmd;
@@ -189,8 +189,7 @@ void blk_dump_rq_flags(struct request *rq, char *msg)
(unsigned long long)blk_rq_pos(rq),
blk_rq_sectors(rq), blk_rq_cur_sectors(rq));
printk(KERN_INFO " bio %p, biotail %p, buffer %p, len %u\n",
- rq->bio, rq->biotail,
- rq->buffer, rq->data_len);
+ rq->bio, rq->biotail, rq->buffer, blk_rq_bytes(rq));
if (blk_pc_request(rq)) {
printk(KERN_INFO " cdb: ");
@@ -1096,7 +1095,7 @@ void init_request_from_bio(struct request *req, struct bio *bio)
req->cmd_flags |= REQ_NOIDLE;
req->errors = 0;
- req->hard_sector = req->sector = bio->bi_sector;
+ req->sector = bio->bi_sector;
req->ioprio = bio_prio(bio);
blk_rq_bio_prep(req->q, req, bio);
}
@@ -1113,14 +1112,13 @@ static inline bool queue_should_plug(struct request_queue *q)
static int __make_request(struct request_queue *q, struct bio *bio)
{
struct request *req;
- int el_ret, nr_sectors;
+ int el_ret;
+ unsigned int bytes = bio->bi_size;
const unsigned short prio = bio_prio(bio);
const int sync = bio_sync(bio);
const int unplug = bio_unplug(bio);
int rw_flags;
- nr_sectors = bio_sectors(bio);
-
/*
* low level driver can indicate that it wants pages above a
* certain limit bounced to low memory (ie for highmem, or even
@@ -1145,7 +1143,7 @@ static int __make_request(struct request_queue *q, struct bio *bio)
req->biotail->bi_next = bio;
req->biotail = bio;
- req->nr_sectors = req->hard_nr_sectors += nr_sectors;
+ req->data_len += bytes;
req->ioprio = ioprio_best(req->ioprio, prio);
if (!blk_rq_cpu_valid(req))
req->cpu = bio->bi_comp_cpu;
@@ -1171,10 +1169,8 @@ static int __make_request(struct request_queue *q, struct bio *bio)
* not touch req->buffer either...
*/
req->buffer = bio_data(bio);
- req->current_nr_sectors = bio_cur_sectors(bio);
- req->hard_cur_sectors = req->current_nr_sectors;
- req->sector = req->hard_sector = bio->bi_sector;
- req->nr_sectors = req->hard_nr_sectors += nr_sectors;
+ req->sector = bio->bi_sector;
+ req->data_len += bytes;
req->ioprio = ioprio_best(req->ioprio, prio);
if (!blk_rq_cpu_valid(req))
req->cpu = bio->bi_comp_cpu;
@@ -1557,7 +1553,7 @@ EXPORT_SYMBOL(submit_bio);
int blk_rq_check_limits(struct request_queue *q, struct request *rq)
{
if (blk_rq_sectors(rq) > q->max_sectors ||
- rq->data_len > q->max_hw_sectors << 9) {
+ blk_rq_bytes(rq) > q->max_hw_sectors << 9) {
printk(KERN_ERR "%s: over max size limit.\n", __func__);
return -EIO;
}
@@ -1675,35 +1671,6 @@ static void blk_account_io_done(struct request *req)
}
}
-/**
- * blk_rq_bytes - Returns bytes left to complete in the entire request
- * @rq: the request being processed
- **/
-unsigned int blk_rq_bytes(struct request *rq)
-{
- if (blk_fs_request(rq))
- return blk_rq_sectors(rq) << 9;
-
- return rq->data_len;
-}
-EXPORT_SYMBOL_GPL(blk_rq_bytes);
-
-/**
- * blk_rq_cur_bytes - Returns bytes left to complete in the current segment
- * @rq: the request being processed
- **/
-unsigned int blk_rq_cur_bytes(struct request *rq)
-{
- if (blk_fs_request(rq))
- return rq->current_nr_sectors << 9;
-
- if (rq->bio)
- return rq->bio->bi_size;
-
- return rq->data_len;
-}
-EXPORT_SYMBOL_GPL(blk_rq_cur_bytes);
-
struct request *elv_next_request(struct request_queue *q)
{
struct request *rq;
@@ -1736,7 +1703,7 @@ struct request *elv_next_request(struct request_queue *q)
if (rq->cmd_flags & REQ_DONTPREP)
break;
- if (q->dma_drain_size && rq->data_len) {
+ if (q->dma_drain_size && blk_rq_bytes(rq)) {
/*
* make sure space for the drain appears we
* know we can do this because max_hw_segments
@@ -1759,7 +1726,7 @@ struct request *elv_next_request(struct request_queue *q)
* avoid resource deadlock. REQ_STARTED will
* prevent other fs requests from passing this one.
*/
- if (q->dma_drain_size && rq->data_len &&
+ if (q->dma_drain_size && blk_rq_bytes(rq) &&
!(rq->cmd_flags & REQ_DONTPREP)) {
/*
* remove the space for the drain we added
@@ -1911,8 +1878,7 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
* can find how many bytes remain in the request
* later.
*/
- req->nr_sectors = req->hard_nr_sectors = 0;
- req->current_nr_sectors = req->hard_cur_sectors = 0;
+ req->data_len = 0;
return false;
}
@@ -1926,8 +1892,25 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
bio_iovec(bio)->bv_len -= nr_bytes;
}
- blk_recalc_rq_sectors(req, total_bytes >> 9);
+ req->data_len -= total_bytes;
+ req->buffer = bio_data(req->bio);
+
+ /* update sector only for requests with clear definition of sector */
+ if (blk_fs_request(req) || blk_discard_rq(req))
+ req->sector += total_bytes >> 9;
+
+ /*
+ * If total number of sectors is less than the first segment
+ * size, something has gone terribly wrong.
+ */
+ if (blk_rq_bytes(req) < blk_rq_cur_bytes(req)) {
+ printk(KERN_ERR "blk: request botched\n");
+ req->data_len = blk_rq_cur_bytes(req);
+ }
+
+ /* recalculate the number of segments */
blk_recalc_rq_segments(req);
+
return true;
}
EXPORT_SYMBOL_GPL(blk_update_request);
@@ -2049,11 +2032,7 @@ void blk_rq_bio_prep(struct request_queue *q, struct request *rq,
rq->nr_phys_segments = bio_phys_segments(q, bio);
rq->buffer = bio_data(bio);
}
- rq->current_nr_sectors = bio_cur_sectors(bio);
- rq->hard_cur_sectors = rq->current_nr_sectors;
- rq->hard_nr_sectors = rq->nr_sectors = bio_sectors(bio);
rq->data_len = bio->bi_size;
-
rq->bio = rq->biotail = bio;
if (bio->bi_bdev)
diff --git a/block/blk-merge.c b/block/blk-merge.c
index bf62a87..b8df66a 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -9,35 +9,6 @@
#include "blk.h"
-void blk_recalc_rq_sectors(struct request *rq, int nsect)
-{
- if (blk_fs_request(rq) || blk_discard_rq(rq)) {
- rq->hard_sector += nsect;
- rq->hard_nr_sectors -= nsect;
-
- /*
- * Move the I/O submission pointers ahead if required.
- */
- if ((rq->nr_sectors >= rq->hard_nr_sectors) &&
- (rq->sector <= rq->hard_sector)) {
- rq->sector = rq->hard_sector;
- rq->nr_sectors = rq->hard_nr_sectors;
- rq->hard_cur_sectors = bio_cur_sectors(rq->bio);
- rq->current_nr_sectors = rq->hard_cur_sectors;
- rq->buffer = bio_data(rq->bio);
- }
-
- /*
- * if total number of sectors is less than the first segment
- * size, something has gone terribly wrong
- */
- if (rq->nr_sectors < rq->current_nr_sectors) {
- printk(KERN_ERR "blk: request botched\n");
- rq->nr_sectors = rq->current_nr_sectors;
- }
- }
-}
-
static unsigned int __blk_recalc_rq_segments(struct request_queue *q,
struct bio *bio)
{
@@ -199,8 +170,9 @@ new_segment:
if (unlikely(rq->cmd_flags & REQ_COPY_USER) &&
- (rq->data_len & q->dma_pad_mask)) {
- unsigned int pad_len = (q->dma_pad_mask & ~rq->data_len) + 1;
+ (blk_rq_bytes(rq) & q->dma_pad_mask)) {
+ unsigned int pad_len =
+ (q->dma_pad_mask & ~blk_rq_bytes(rq)) + 1;
sg->length += pad_len;
rq->extra_len += pad_len;
@@ -398,7 +370,7 @@ static int attempt_merge(struct request_queue *q, struct request *req,
req->biotail->bi_next = next->bio;
req->biotail = next->biotail;
- req->nr_sectors = req->hard_nr_sectors += next->hard_nr_sectors;
+ req->data_len += blk_rq_bytes(next);
elv_merge_requests(q, req, next);
diff --git a/block/blk.h b/block/blk.h
index 5111559..ab54529 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -101,7 +101,6 @@ int ll_front_merge_fn(struct request_queue *q, struct request *req,
int attempt_back_merge(struct request_queue *q, struct request *rq);
int attempt_front_merge(struct request_queue *q, struct request *rq);
void blk_recalc_rq_segments(struct request *rq);
-void blk_recalc_rq_sectors(struct request *rq, int nsect);
void blk_queue_congestion_threshold(struct request_queue *q);
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index db4d990..99ac430 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -579,9 +579,9 @@ cfq_prio_tree_lookup(struct cfq_data *cfqd, struct rb_root *root,
* Sort strictly based on sector. Smallest to the left,
* largest to the right.
*/
- if (sector > cfqq->next_rq->sector)
+ if (sector > blk_rq_pos(cfqq->next_rq))
n = &(*p)->rb_right;
- else if (sector < cfqq->next_rq->sector)
+ else if (sector < blk_rq_pos(cfqq->next_rq))
n = &(*p)->rb_left;
else
break;
@@ -611,8 +611,8 @@ static void cfq_prio_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq)
return;
cfqq->p_root = &cfqd->prio_trees[cfqq->org_ioprio];
- __cfqq = cfq_prio_tree_lookup(cfqd, cfqq->p_root, cfqq->next_rq->sector,
- &parent, &p);
+ __cfqq = cfq_prio_tree_lookup(cfqd, cfqq->p_root,
+ blk_rq_pos(cfqq->next_rq), &parent, &p);
if (!__cfqq) {
rb_link_node(&cfqq->p_node, parent, p);
rb_insert_color(&cfqq->p_node, cfqq->p_root);
@@ -996,7 +996,7 @@ static struct cfq_queue *cfqq_close(struct cfq_data *cfqd,
if (cfq_rq_close(cfqd, __cfqq->next_rq))
return __cfqq;
- if (__cfqq->next_rq->sector < sector)
+ if (blk_rq_pos(__cfqq->next_rq) < sector)
node = rb_next(&__cfqq->p_node);
else
node = rb_prev(&__cfqq->p_node);
diff --git a/include/linux/bio.h b/include/linux/bio.h
index f37ca8c..d30ec6f 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -218,12 +218,12 @@ struct bio {
#define bio_sectors(bio) ((bio)->bi_size >> 9)
#define bio_empty_barrier(bio) (bio_barrier(bio) && !bio_has_data(bio) && !bio_discard(bio))
-static inline unsigned int bio_cur_sectors(struct bio *bio)
+static inline unsigned int bio_cur_bytes(struct bio *bio)
{
if (bio->bi_vcnt)
- return bio_iovec(bio)->bv_len >> 9;
+ return bio_iovec(bio)->bv_len;
else /* dataless requests such as discard */
- return bio->bi_size >> 9;
+ return bio->bi_size;
}
static inline void *bio_data(struct bio *bio)
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 1e18ef7..943cbfe 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -166,19 +166,8 @@ struct request {
enum rq_cmd_type_bits cmd_type;
unsigned long atomic_flags;
- /* Maintain bio traversal state for part by part I/O submission.
- * hard_* are block layer internals, no driver should touch them!
- */
-
- sector_t sector; /* next sector to submit */
- sector_t hard_sector; /* next sector to complete */
- unsigned long nr_sectors; /* no. of sectors left to submit */
- unsigned long hard_nr_sectors; /* no. of sectors left to complete */
- /* no. of sectors left to submit in the current segment */
- unsigned int current_nr_sectors;
-
- /* no. of sectors left to complete in the current segment */
- unsigned int hard_cur_sectors;
+ sector_t sector; /* sector cursor */
+ unsigned int data_len; /* total data len, don't access directly */
struct bio *bio;
struct bio *biotail;
@@ -226,7 +215,6 @@ struct request {
unsigned char __cmd[BLK_MAX_CDB];
unsigned char *cmd;
- unsigned int data_len;
unsigned int extra_len; /* length of alignment and padding */
unsigned int sense_len;
unsigned int resid_len; /* residual count */
@@ -840,20 +828,27 @@ extern void blkdev_dequeue_request(struct request *req);
*/
static inline sector_t blk_rq_pos(struct request *rq)
{
- return rq->hard_sector;
+ return rq->sector;
+}
+
+static inline unsigned int blk_rq_bytes(struct request *rq)
+{
+ return rq->data_len;
}
-extern unsigned int blk_rq_bytes(struct request *rq);
-extern unsigned int blk_rq_cur_bytes(struct request *rq);
+static inline int blk_rq_cur_bytes(struct request *rq)
+{
+ return rq->bio ? bio_cur_bytes(rq->bio) : 0;
+}
static inline unsigned int blk_rq_sectors(struct request *rq)
{
- return rq->hard_nr_sectors;
+ return blk_rq_bytes(rq) >> 9;
}
static inline unsigned int blk_rq_cur_sectors(struct request *rq)
{
- return rq->hard_cur_sectors;
+ return blk_rq_cur_bytes(rq) >> 9;
}
/*
@@ -928,7 +923,7 @@ static inline void blk_end_request_all(struct request *rq, int error)
*/
static inline bool blk_end_request_cur(struct request *rq, int error)
{
- return blk_end_request(rq, error, rq->hard_cur_sectors << 9);
+ return blk_end_request(rq, error, blk_rq_cur_bytes(rq));
}
/**
@@ -981,7 +976,7 @@ static inline void __blk_end_request_all(struct request *rq, int error)
*/
static inline bool __blk_end_request_cur(struct request *rq, int error)
{
- return __blk_end_request(rq, error, rq->hard_cur_sectors << 9);
+ return __blk_end_request(rq, error, blk_rq_cur_bytes(rq));
}
extern void blk_complete_request(struct request *);
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index c59b769..4e46287 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -171,7 +171,7 @@ enum {
ELV_MQUEUE_MUST,
};
-#define rq_end_sector(rq) ((rq)->sector + (rq)->nr_sectors)
+#define rq_end_sector(rq) (blk_rq_pos(rq) + blk_rq_sectors(rq))
#define rb_entry_rq(node) rb_entry((node), struct request, rb_node)
/*
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index 42f1c11..5708a14 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -642,12 +642,12 @@ static void blk_add_trace_rq(struct request_queue *q, struct request *rq,
if (blk_pc_request(rq)) {
what |= BLK_TC_ACT(BLK_TC_PC);
- __blk_add_trace(bt, 0, rq->data_len, rw, what, rq->errors,
- rq->cmd_len, rq->cmd);
+ __blk_add_trace(bt, 0, blk_rq_bytes(rq), rw,
+ what, rq->errors, rq->cmd_len, rq->cmd);
} else {
what |= BLK_TC_ACT(BLK_TC_FS);
- __blk_add_trace(bt, blk_rq_pos(rq), blk_rq_sectors(rq) << 9,
- rw, what, rq->errors, 0, NULL);
+ __blk_add_trace(bt, blk_rq_pos(rq), blk_rq_bytes(rq), rw,
+ what, rq->errors, 0, NULL);
}
}
@@ -854,11 +854,11 @@ void blk_add_driver_data(struct request_queue *q,
return;
if (blk_pc_request(rq))
- __blk_add_trace(bt, 0, rq->data_len, 0, BLK_TA_DRV_DATA,
- rq->errors, len, data);
+ __blk_add_trace(bt, 0, blk_rq_bytes(rq), 0,
+ BLK_TA_DRV_DATA, rq->errors, len, data);
else
- __blk_add_trace(bt, blk_rq_pos(rq), blk_rq_sectors(rq) << 9,
- 0, BLK_TA_DRV_DATA, rq->errors, len, data);
+ __blk_add_trace(bt, blk_rq_pos(rq), blk_rq_bytes(rq), 0,
+ BLK_TA_DRV_DATA, rq->errors, len, data);
}
EXPORT_SYMBOL_GPL(blk_add_driver_data);
--
1.6.0.2
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH 08/10] block: cleanup rq->data_len usages
2009-04-29 9:13 ` Tejun Heo
@ 2009-04-29 9:13 ` Tejun Heo
-1 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 9:13 UTC (permalink / raw)
To: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petko
Cc: Tejun Heo, Darrick J. Wong
With recent unification of fields, it's now guaranteed that
rq->data_len always equals blk_rq_bytes(). Convert all non-IDE direct
users to accessors. IDE will be converted in a separate patch.
[ Impact: convert direct rq->data_len usages to blk_rq_bytes() ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
---
drivers/ata/libata-scsi.c | 2 +-
drivers/block/ub.c | 8 ++++----
drivers/message/fusion/mptsas.c | 20 ++++++++++----------
drivers/message/i2o/i2o_block.c | 2 +-
drivers/scsi/libsas/sas_expander.c | 8 ++++----
drivers/scsi/libsas/sas_host_smp.c | 18 +++++++++---------
drivers/scsi/mpt2sas/mpt2sas_transport.c | 21 +++++++++++----------
drivers/scsi/osd/osd_initiator.c | 4 ++--
drivers/scsi/scsi_lib.c | 13 ++++++-------
drivers/scsi/scsi_tgt_lib.c | 2 +-
fs/exofs/osd.c | 4 ++--
11 files changed, 51 insertions(+), 51 deletions(-)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 2733b0c..6e4c600 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1084,7 +1084,7 @@ static int atapi_drain_needed(struct request *rq)
if (likely(!blk_pc_request(rq)))
return 0;
- if (!rq->data_len || (rq->cmd_flags & REQ_RW))
+ if (!blk_rq_bytes(rq) || (rq->cmd_flags & REQ_RW))
return 0;
return atapi_cmd_type(rq->cmd[0]) == ATAPI_MISC;
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index dc3b899..1591f61 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -747,7 +747,7 @@ static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
{
struct request *rq = urq->rq;
- if (rq->data_len == 0) {
+ if (blk_rq_bytes(rq) == 0) {
cmd->dir = UB_DIR_NONE;
} else {
if (rq_data_dir(rq) == WRITE)
@@ -762,7 +762,7 @@ static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
memcpy(&cmd->cdb, rq->cmd, rq->cmd_len);
cmd->cdb_len = rq->cmd_len;
- cmd->len = rq->data_len;
+ cmd->len = blk_rq_bytes(rq);
/*
* To reapply this to every URB is not as incorrect as it looks.
@@ -783,8 +783,8 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
if (cmd->error == 0) {
if (blk_pc_request(rq)) {
- if (cmd->act_len < rq->data_len)
- rq->resid_len = rq->data_len - cmd->act_len;
+ if (cmd->act_len < blk_rq_bytes(rq))
+ rq->resid_len = blk_rq_bytes(rq) - cmd->act_len;
scsi_status = 0;
} else {
if (cmd->act_len != cmd->len) {
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 5d5f347..4e6fcf0 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -1277,8 +1277,8 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
/* do we need to support multiple segments? */
if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
printk(MYIOC_s_ERR_FMT "%s: multiple segments req %u %u, rsp %u %u\n",
- ioc->name, __func__, req->bio->bi_vcnt, req->data_len,
- rsp->bio->bi_vcnt, rsp->data_len);
+ ioc->name, __func__, req->bio->bi_vcnt, blk_rq_bytes(req),
+ rsp->bio->bi_vcnt, blk_rq_bytes(rsp));
return -EINVAL;
}
@@ -1295,7 +1295,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
smpreq = (SmpPassthroughRequest_t *)mf;
memset(smpreq, 0, sizeof(*smpreq));
- smpreq->RequestDataLength = cpu_to_le16(req->data_len - 4);
+ smpreq->RequestDataLength = cpu_to_le16(blk_rq_bytes(req) - 4);
smpreq->Function = MPI_FUNCTION_SMP_PASSTHROUGH;
if (rphy)
@@ -1321,10 +1321,10 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
MPI_SGE_FLAGS_END_OF_BUFFER |
MPI_SGE_FLAGS_DIRECTION |
mpt_addr_size()) << MPI_SGE_FLAGS_SHIFT;
- flagsLength |= (req->data_len - 4);
+ flagsLength |= (blk_rq_bytes(req) - 4);
dma_addr_out = pci_map_single(ioc->pcidev, bio_data(req->bio),
- req->data_len, PCI_DMA_BIDIRECTIONAL);
+ blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL);
if (!dma_addr_out)
goto put_mf;
mpt_add_sge(psge, flagsLength, dma_addr_out);
@@ -1332,9 +1332,9 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
/* response */
flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
- flagsLength |= rsp->data_len + 4;
+ flagsLength |= blk_rq_bytes(rsp) + 4;
dma_addr_in = pci_map_single(ioc->pcidev, bio_data(rsp->bio),
- rsp->data_len, PCI_DMA_BIDIRECTIONAL);
+ blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL);
if (!dma_addr_in)
goto unmap;
mpt_add_sge(psge, flagsLength, dma_addr_in);
@@ -1357,7 +1357,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
smprep = (SmpPassthroughReply_t *)ioc->sas_mgmt.reply;
memcpy(req->sense, smprep, sizeof(*smprep));
req->sense_len = sizeof(*smprep);
- rsp->resid_len = rsp->data_len - smprep->ResponseDataLength;
+ rsp->resid_len = blk_rq_bytes(rsp) - smprep->ResponseDataLength;
} else {
printk(MYIOC_s_ERR_FMT "%s: smp passthru reply failed to be returned\n",
ioc->name, __func__);
@@ -1365,10 +1365,10 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
}
unmap:
if (dma_addr_out)
- pci_unmap_single(ioc->pcidev, dma_addr_out, req->data_len,
+ pci_unmap_single(ioc->pcidev, dma_addr_out, blk_rq_bytes(req),
PCI_DMA_BIDIRECTIONAL);
if (dma_addr_in)
- pci_unmap_single(ioc->pcidev, dma_addr_in, rsp->data_len,
+ pci_unmap_single(ioc->pcidev, dma_addr_in, blk_rq_bytes(rsp),
PCI_DMA_BIDIRECTIONAL);
put_mf:
if (mf)
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index 510eb47..6b61d28 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -430,7 +430,7 @@ static void i2o_block_end_request(struct request *req, int error,
int leftover = (blk_rq_sectors(req) << KERNEL_SECTOR_SHIFT);
if (blk_pc_request(req))
- leftover = req->data_len;
+ leftover = blk_rq_bytes(req);
if (error)
blk_end_request(req, -EIO, leftover);
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 6605ec9..531af9e 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -1927,13 +1927,13 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
/* do we need to support multiple segments? */
if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
printk("%s: multiple segments req %u %u, rsp %u %u\n",
- __func__, req->bio->bi_vcnt, req->data_len,
- rsp->bio->bi_vcnt, rsp->data_len);
+ __func__, req->bio->bi_vcnt, blk_rq_bytes(req),
+ rsp->bio->bi_vcnt, blk_rq_bytes(rsp));
return -EINVAL;
}
- ret = smp_execute_task(dev, bio_data(req->bio), req->data_len,
- bio_data(rsp->bio), rsp->data_len);
+ ret = smp_execute_task(dev, bio_data(req->bio), blk_rq_bytes(req),
+ bio_data(rsp->bio), blk_rq_bytes(rsp));
if (ret > 0) {
/* positive number is the untransferred residual */
rsp->resid_len = ret;
diff --git a/drivers/scsi/libsas/sas_host_smp.c b/drivers/scsi/libsas/sas_host_smp.c
index 89952ed..be9a951 100644
--- a/drivers/scsi/libsas/sas_host_smp.c
+++ b/drivers/scsi/libsas/sas_host_smp.c
@@ -137,21 +137,21 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
int error = -EINVAL;
/* eight is the minimum size for request and response frames */
- if (req->data_len < 8 || rsp->data_len < 8)
+ if (blk_rq_bytes(req) < 8 || blk_rq_bytes(rsp) < 8)
goto out;
- if (bio_offset(req->bio) + req->data_len > PAGE_SIZE ||
- bio_offset(rsp->bio) + rsp->data_len > PAGE_SIZE) {
+ if (bio_offset(req->bio) + blk_rq_bytes(req) > PAGE_SIZE ||
+ bio_offset(rsp->bio) + blk_rq_bytes(rsp) > PAGE_SIZE) {
shost_printk(KERN_ERR, shost,
"SMP request/response frame crosses page boundary");
goto out;
}
- req_data = kzalloc(req->data_len, GFP_KERNEL);
+ req_data = kzalloc(blk_rq_bytes(req), GFP_KERNEL);
/* make sure frame can always be built ... we copy
* back only the requested length */
- resp_data = kzalloc(max(rsp->data_len, 128U), GFP_KERNEL);
+ resp_data = kzalloc(max(blk_rq_bytes(rsp), 128U), GFP_KERNEL);
if (!req_data || !resp_data) {
error = -ENOMEM;
@@ -160,7 +160,7 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
local_irq_disable();
buf = kmap_atomic(bio_page(req->bio), KM_USER0) + bio_offset(req->bio);
- memcpy(req_data, buf, req->data_len);
+ memcpy(req_data, buf, blk_rq_bytes(req));
kunmap_atomic(buf - bio_offset(req->bio), KM_USER0);
local_irq_enable();
@@ -176,8 +176,8 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
resp_data[1] = req_data[1];
resp_data[2] = SMP_RESP_FUNC_UNK;
- req->resid_len = req->data_len;
- rsp->resid_len = rsp->data_len;
+ req->resid_len = blk_rq_bytes(req);
+ rsp->resid_len = blk_rq_bytes(rsp);
switch (req_data[1]) {
case SMP_REPORT_GENERAL:
@@ -264,7 +264,7 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
local_irq_disable();
buf = kmap_atomic(bio_page(rsp->bio), KM_USER0) + bio_offset(rsp->bio);
- memcpy(buf, resp_data, rsp->data_len);
+ memcpy(buf, resp_data, blk_rq_bytes(rsp));
flush_kernel_dcache_page(bio_page(rsp->bio));
kunmap_atomic(buf - bio_offset(rsp->bio), KM_USER0);
local_irq_enable();
diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c
index 53759c5..af95a44 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_transport.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c
@@ -1041,7 +1041,7 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
printk(MPT2SAS_ERR_FMT "%s: multiple segments req %u %u, "
"rsp %u %u\n", ioc->name, __func__, req->bio->bi_vcnt,
- req->data_len, rsp->bio->bi_vcnt, rsp->data_len);
+ blk_rq_bytes(req), rsp->bio->bi_vcnt, blk_rq_bytes(rsp));
return -EINVAL;
}
@@ -1104,7 +1104,7 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
*((u64 *)&mpi_request->SASAddress) = (rphy) ?
cpu_to_le64(rphy->identify.sas_address) :
cpu_to_le64(ioc->sas_hba.sas_address);
- mpi_request->RequestDataLength = cpu_to_le16(req->data_len - 4);
+ mpi_request->RequestDataLength = cpu_to_le16(blk_rq_bytes(req) - 4);
psge = &mpi_request->SGL;
/* WRITE sgel first */
@@ -1112,13 +1112,13 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
dma_addr_out = pci_map_single(ioc->pdev, bio_data(req->bio),
- req->data_len, PCI_DMA_BIDIRECTIONAL);
+ blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL);
if (!dma_addr_out) {
mpt2sas_base_free_smid(ioc, le16_to_cpu(smid));
goto unmap;
}
- ioc->base_add_sg_single(psge, sgl_flags | (req->data_len - 4),
+ ioc->base_add_sg_single(psge, sgl_flags | (blk_rq_bytes(req) - 4),
dma_addr_out);
/* incr sgel */
@@ -1129,14 +1129,14 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
MPI2_SGE_FLAGS_END_OF_LIST);
sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
- dma_addr_in = pci_map_single(ioc->pdev, bio_data(rsp->bio),
- rsp->data_len, PCI_DMA_BIDIRECTIONAL);
+ dma_addr_in = pci_map_single(ioc->pdev, bio_data(rsp->bio),
+ blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL);
if (!dma_addr_in) {
mpt2sas_base_free_smid(ioc, le16_to_cpu(smid));
goto unmap;
}
- ioc->base_add_sg_single(psge, sgl_flags | (rsp->data_len + 4),
+ ioc->base_add_sg_single(psge, sgl_flags | (blk_rq_bytes(rsp) + 4),
dma_addr_in);
dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - "
@@ -1170,7 +1170,8 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
memcpy(req->sense, mpi_reply, sizeof(*mpi_reply));
req->sense_len = sizeof(*mpi_reply);
- rsp->resid_len = rsp->data_len - mpi_reply->ResponseDataLength;
+ rsp->resid_len = blk_rq_bytes(rsp) -
+ mpi_reply->ResponseDataLength;
} else {
dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT
"%s - no reply\n", ioc->name, __func__));
@@ -1186,10 +1187,10 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
unmap:
if (dma_addr_out)
- pci_unmap_single(ioc->pdev, dma_addr_out, req->data_len,
+ pci_unmap_single(ioc->pdev, dma_addr_out, blk_rq_bytes(req),
PCI_DMA_BIDIRECTIONAL);
if (dma_addr_in)
- pci_unmap_single(ioc->pdev, dma_addr_in, rsp->data_len,
+ pci_unmap_single(ioc->pdev, dma_addr_in, blk_rq_bytes(rsp),
PCI_DMA_BIDIRECTIONAL);
out:
diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index 2a5f077..d178a8b 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -1299,7 +1299,7 @@ int osd_finalize_request(struct osd_request *or,
return ret;
}
OSD_DEBUG("out bytes=%llu (bytes_req=%u)\n",
- _LLU(or->out.total_bytes), or->out.req->data_len);
+ _LLU(or->out.total_bytes), blk_rq_bytes(or->out.req));
}
if (or->in.bio) {
ret = blk_rq_append_bio(or->request->q, or->in.req, or->in.bio);
@@ -1308,7 +1308,7 @@ int osd_finalize_request(struct osd_request *or,
return ret;
}
OSD_DEBUG("in bytes=%llu (bytes_req=%u)\n",
- _LLU(or->in.total_bytes), or->in.req->data_len);
+ _LLU(or->in.total_bytes), blk_rq_bytes(or->in.req));
}
or->out.pad_buff = sg_out_pad_buffer;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 39b3acf..3d16c70 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -682,14 +682,13 @@ EXPORT_SYMBOL(scsi_release_buffers);
static void scsi_end_bidi_request(struct scsi_cmnd *cmd)
{
struct request *req = cmd->request;
- unsigned int dlen = req->data_len;
- unsigned int next_dlen = req->next_rq->data_len;
req->resid_len = scsi_out(cmd)->resid;
req->next_rq->resid_len = scsi_in(cmd)->resid;
/* The req and req->next_rq have not been completed */
- BUG_ON(blk_end_bidi_request(req, 0, dlen, next_dlen));
+ BUG_ON(blk_end_bidi_request(req, 0, blk_rq_bytes(req),
+ blk_rq_bytes(req->next_rq)));
scsi_release_buffers(cmd);
@@ -966,7 +965,7 @@ static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb,
BUG_ON(count > sdb->table.nents);
sdb->table.nents = count;
if (blk_pc_request(req))
- sdb->length = req->data_len;
+ sdb->length = blk_rq_bytes(req);
else
sdb->length = blk_rq_sectors(req) << 9;
return BLKPREP_OK;
@@ -1087,21 +1086,21 @@ int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req)
if (unlikely(ret))
return ret;
} else {
- BUG_ON(req->data_len);
+ BUG_ON(blk_rq_bytes(req));
memset(&cmd->sdb, 0, sizeof(cmd->sdb));
req->buffer = NULL;
}
cmd->cmd_len = req->cmd_len;
- if (!req->data_len)
+ if (!blk_rq_bytes(req))
cmd->sc_data_direction = DMA_NONE;
else if (rq_data_dir(req) == WRITE)
cmd->sc_data_direction = DMA_TO_DEVICE;
else
cmd->sc_data_direction = DMA_FROM_DEVICE;
- cmd->transfersize = req->data_len;
+ cmd->transfersize = blk_rq_bytes(req);
cmd->allowed = req->retries;
return BLKPREP_OK;
}
diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c
index 48ba413..1030327 100644
--- a/drivers/scsi/scsi_tgt_lib.c
+++ b/drivers/scsi/scsi_tgt_lib.c
@@ -387,7 +387,7 @@ static int scsi_map_user_pages(struct scsi_tgt_cmd *tcmd, struct scsi_cmnd *cmd,
* we use REQ_TYPE_BLOCK_PC so scsi_init_io doesn't set the
* length for us.
*/
- cmd->sdb.length = rq->data_len;
+ cmd->sdb.length = blk_rq_bytes(rq);
return 0;
diff --git a/fs/exofs/osd.c b/fs/exofs/osd.c
index b249ae9..c97420b 100644
--- a/fs/exofs/osd.c
+++ b/fs/exofs/osd.c
@@ -50,10 +50,10 @@ int exofs_check_ok_resid(struct osd_request *or, u64 *in_resid, u64 *out_resid)
/* FIXME: should be include in osd_sense_info */
if (in_resid)
- *in_resid = or->in.req ? or->in.req->data_len : 0;
+ *in_resid = or->in.req ? blk_rq_bytes(or->in.req) : 0;
if (out_resid)
- *out_resid = or->out.req ? or->out.req->data_len : 0;
+ *out_resid = or->out.req ? blk_rq_bytes(or->out.req) : 0;
return ret;
}
--
1.6.0.2
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH 08/10] block: cleanup rq->data_len usages
@ 2009-04-29 9:13 ` Tejun Heo
0 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 9:13 UTC (permalink / raw)
To: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, grant.likely, paul.clements,
jesper.juhl, tim, jeremy, adrian, oakad, dwmw2, schwidefsky,
ballabio_dario, davem, rusty, Markus.Lidel, bharrosh
Cc: Tejun Heo, Darrick J. Wong
With recent unification of fields, it's now guaranteed that
rq->data_len always equals blk_rq_bytes(). Convert all non-IDE direct
users to accessors. IDE will be converted in a separate patch.
[ Impact: convert direct rq->data_len usages to blk_rq_bytes() ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
---
drivers/ata/libata-scsi.c | 2 +-
drivers/block/ub.c | 8 ++++----
drivers/message/fusion/mptsas.c | 20 ++++++++++----------
drivers/message/i2o/i2o_block.c | 2 +-
drivers/scsi/libsas/sas_expander.c | 8 ++++----
drivers/scsi/libsas/sas_host_smp.c | 18 +++++++++---------
drivers/scsi/mpt2sas/mpt2sas_transport.c | 21 +++++++++++----------
drivers/scsi/osd/osd_initiator.c | 4 ++--
drivers/scsi/scsi_lib.c | 13 ++++++-------
drivers/scsi/scsi_tgt_lib.c | 2 +-
fs/exofs/osd.c | 4 ++--
11 files changed, 51 insertions(+), 51 deletions(-)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 2733b0c..6e4c600 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1084,7 +1084,7 @@ static int atapi_drain_needed(struct request *rq)
if (likely(!blk_pc_request(rq)))
return 0;
- if (!rq->data_len || (rq->cmd_flags & REQ_RW))
+ if (!blk_rq_bytes(rq) || (rq->cmd_flags & REQ_RW))
return 0;
return atapi_cmd_type(rq->cmd[0]) == ATAPI_MISC;
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index dc3b899..1591f61 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -747,7 +747,7 @@ static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
{
struct request *rq = urq->rq;
- if (rq->data_len == 0) {
+ if (blk_rq_bytes(rq) == 0) {
cmd->dir = UB_DIR_NONE;
} else {
if (rq_data_dir(rq) == WRITE)
@@ -762,7 +762,7 @@ static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
memcpy(&cmd->cdb, rq->cmd, rq->cmd_len);
cmd->cdb_len = rq->cmd_len;
- cmd->len = rq->data_len;
+ cmd->len = blk_rq_bytes(rq);
/*
* To reapply this to every URB is not as incorrect as it looks.
@@ -783,8 +783,8 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
if (cmd->error == 0) {
if (blk_pc_request(rq)) {
- if (cmd->act_len < rq->data_len)
- rq->resid_len = rq->data_len - cmd->act_len;
+ if (cmd->act_len < blk_rq_bytes(rq))
+ rq->resid_len = blk_rq_bytes(rq) - cmd->act_len;
scsi_status = 0;
} else {
if (cmd->act_len != cmd->len) {
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 5d5f347..4e6fcf0 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -1277,8 +1277,8 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
/* do we need to support multiple segments? */
if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
printk(MYIOC_s_ERR_FMT "%s: multiple segments req %u %u, rsp %u %u\n",
- ioc->name, __func__, req->bio->bi_vcnt, req->data_len,
- rsp->bio->bi_vcnt, rsp->data_len);
+ ioc->name, __func__, req->bio->bi_vcnt, blk_rq_bytes(req),
+ rsp->bio->bi_vcnt, blk_rq_bytes(rsp));
return -EINVAL;
}
@@ -1295,7 +1295,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
smpreq = (SmpPassthroughRequest_t *)mf;
memset(smpreq, 0, sizeof(*smpreq));
- smpreq->RequestDataLength = cpu_to_le16(req->data_len - 4);
+ smpreq->RequestDataLength = cpu_to_le16(blk_rq_bytes(req) - 4);
smpreq->Function = MPI_FUNCTION_SMP_PASSTHROUGH;
if (rphy)
@@ -1321,10 +1321,10 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
MPI_SGE_FLAGS_END_OF_BUFFER |
MPI_SGE_FLAGS_DIRECTION |
mpt_addr_size()) << MPI_SGE_FLAGS_SHIFT;
- flagsLength |= (req->data_len - 4);
+ flagsLength |= (blk_rq_bytes(req) - 4);
dma_addr_out = pci_map_single(ioc->pcidev, bio_data(req->bio),
- req->data_len, PCI_DMA_BIDIRECTIONAL);
+ blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL);
if (!dma_addr_out)
goto put_mf;
mpt_add_sge(psge, flagsLength, dma_addr_out);
@@ -1332,9 +1332,9 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
/* response */
flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
- flagsLength |= rsp->data_len + 4;
+ flagsLength |= blk_rq_bytes(rsp) + 4;
dma_addr_in = pci_map_single(ioc->pcidev, bio_data(rsp->bio),
- rsp->data_len, PCI_DMA_BIDIRECTIONAL);
+ blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL);
if (!dma_addr_in)
goto unmap;
mpt_add_sge(psge, flagsLength, dma_addr_in);
@@ -1357,7 +1357,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
smprep = (SmpPassthroughReply_t *)ioc->sas_mgmt.reply;
memcpy(req->sense, smprep, sizeof(*smprep));
req->sense_len = sizeof(*smprep);
- rsp->resid_len = rsp->data_len - smprep->ResponseDataLength;
+ rsp->resid_len = blk_rq_bytes(rsp) - smprep->ResponseDataLength;
} else {
printk(MYIOC_s_ERR_FMT "%s: smp passthru reply failed to be returned\n",
ioc->name, __func__);
@@ -1365,10 +1365,10 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
}
unmap:
if (dma_addr_out)
- pci_unmap_single(ioc->pcidev, dma_addr_out, req->data_len,
+ pci_unmap_single(ioc->pcidev, dma_addr_out, blk_rq_bytes(req),
PCI_DMA_BIDIRECTIONAL);
if (dma_addr_in)
- pci_unmap_single(ioc->pcidev, dma_addr_in, rsp->data_len,
+ pci_unmap_single(ioc->pcidev, dma_addr_in, blk_rq_bytes(rsp),
PCI_DMA_BIDIRECTIONAL);
put_mf:
if (mf)
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index 510eb47..6b61d28 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -430,7 +430,7 @@ static void i2o_block_end_request(struct request *req, int error,
int leftover = (blk_rq_sectors(req) << KERNEL_SECTOR_SHIFT);
if (blk_pc_request(req))
- leftover = req->data_len;
+ leftover = blk_rq_bytes(req);
if (error)
blk_end_request(req, -EIO, leftover);
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 6605ec9..531af9e 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -1927,13 +1927,13 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
/* do we need to support multiple segments? */
if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
printk("%s: multiple segments req %u %u, rsp %u %u\n",
- __func__, req->bio->bi_vcnt, req->data_len,
- rsp->bio->bi_vcnt, rsp->data_len);
+ __func__, req->bio->bi_vcnt, blk_rq_bytes(req),
+ rsp->bio->bi_vcnt, blk_rq_bytes(rsp));
return -EINVAL;
}
- ret = smp_execute_task(dev, bio_data(req->bio), req->data_len,
- bio_data(rsp->bio), rsp->data_len);
+ ret = smp_execute_task(dev, bio_data(req->bio), blk_rq_bytes(req),
+ bio_data(rsp->bio), blk_rq_bytes(rsp));
if (ret > 0) {
/* positive number is the untransferred residual */
rsp->resid_len = ret;
diff --git a/drivers/scsi/libsas/sas_host_smp.c b/drivers/scsi/libsas/sas_host_smp.c
index 89952ed..be9a951 100644
--- a/drivers/scsi/libsas/sas_host_smp.c
+++ b/drivers/scsi/libsas/sas_host_smp.c
@@ -137,21 +137,21 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
int error = -EINVAL;
/* eight is the minimum size for request and response frames */
- if (req->data_len < 8 || rsp->data_len < 8)
+ if (blk_rq_bytes(req) < 8 || blk_rq_bytes(rsp) < 8)
goto out;
- if (bio_offset(req->bio) + req->data_len > PAGE_SIZE ||
- bio_offset(rsp->bio) + rsp->data_len > PAGE_SIZE) {
+ if (bio_offset(req->bio) + blk_rq_bytes(req) > PAGE_SIZE ||
+ bio_offset(rsp->bio) + blk_rq_bytes(rsp) > PAGE_SIZE) {
shost_printk(KERN_ERR, shost,
"SMP request/response frame crosses page boundary");
goto out;
}
- req_data = kzalloc(req->data_len, GFP_KERNEL);
+ req_data = kzalloc(blk_rq_bytes(req), GFP_KERNEL);
/* make sure frame can always be built ... we copy
* back only the requested length */
- resp_data = kzalloc(max(rsp->data_len, 128U), GFP_KERNEL);
+ resp_data = kzalloc(max(blk_rq_bytes(rsp), 128U), GFP_KERNEL);
if (!req_data || !resp_data) {
error = -ENOMEM;
@@ -160,7 +160,7 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
local_irq_disable();
buf = kmap_atomic(bio_page(req->bio), KM_USER0) + bio_offset(req->bio);
- memcpy(req_data, buf, req->data_len);
+ memcpy(req_data, buf, blk_rq_bytes(req));
kunmap_atomic(buf - bio_offset(req->bio), KM_USER0);
local_irq_enable();
@@ -176,8 +176,8 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
resp_data[1] = req_data[1];
resp_data[2] = SMP_RESP_FUNC_UNK;
- req->resid_len = req->data_len;
- rsp->resid_len = rsp->data_len;
+ req->resid_len = blk_rq_bytes(req);
+ rsp->resid_len = blk_rq_bytes(rsp);
switch (req_data[1]) {
case SMP_REPORT_GENERAL:
@@ -264,7 +264,7 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
local_irq_disable();
buf = kmap_atomic(bio_page(rsp->bio), KM_USER0) + bio_offset(rsp->bio);
- memcpy(buf, resp_data, rsp->data_len);
+ memcpy(buf, resp_data, blk_rq_bytes(rsp));
flush_kernel_dcache_page(bio_page(rsp->bio));
kunmap_atomic(buf - bio_offset(rsp->bio), KM_USER0);
local_irq_enable();
diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c
index 53759c5..af95a44 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_transport.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c
@@ -1041,7 +1041,7 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
printk(MPT2SAS_ERR_FMT "%s: multiple segments req %u %u, "
"rsp %u %u\n", ioc->name, __func__, req->bio->bi_vcnt,
- req->data_len, rsp->bio->bi_vcnt, rsp->data_len);
+ blk_rq_bytes(req), rsp->bio->bi_vcnt, blk_rq_bytes(rsp));
return -EINVAL;
}
@@ -1104,7 +1104,7 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
*((u64 *)&mpi_request->SASAddress) = (rphy) ?
cpu_to_le64(rphy->identify.sas_address) :
cpu_to_le64(ioc->sas_hba.sas_address);
- mpi_request->RequestDataLength = cpu_to_le16(req->data_len - 4);
+ mpi_request->RequestDataLength = cpu_to_le16(blk_rq_bytes(req) - 4);
psge = &mpi_request->SGL;
/* WRITE sgel first */
@@ -1112,13 +1112,13 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
dma_addr_out = pci_map_single(ioc->pdev, bio_data(req->bio),
- req->data_len, PCI_DMA_BIDIRECTIONAL);
+ blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL);
if (!dma_addr_out) {
mpt2sas_base_free_smid(ioc, le16_to_cpu(smid));
goto unmap;
}
- ioc->base_add_sg_single(psge, sgl_flags | (req->data_len - 4),
+ ioc->base_add_sg_single(psge, sgl_flags | (blk_rq_bytes(req) - 4),
dma_addr_out);
/* incr sgel */
@@ -1129,14 +1129,14 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
MPI2_SGE_FLAGS_END_OF_LIST);
sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
- dma_addr_in = pci_map_single(ioc->pdev, bio_data(rsp->bio),
- rsp->data_len, PCI_DMA_BIDIRECTIONAL);
+ dma_addr_in = pci_map_single(ioc->pdev, bio_data(rsp->bio),
+ blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL);
if (!dma_addr_in) {
mpt2sas_base_free_smid(ioc, le16_to_cpu(smid));
goto unmap;
}
- ioc->base_add_sg_single(psge, sgl_flags | (rsp->data_len + 4),
+ ioc->base_add_sg_single(psge, sgl_flags | (blk_rq_bytes(rsp) + 4),
dma_addr_in);
dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - "
@@ -1170,7 +1170,8 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
memcpy(req->sense, mpi_reply, sizeof(*mpi_reply));
req->sense_len = sizeof(*mpi_reply);
- rsp->resid_len = rsp->data_len - mpi_reply->ResponseDataLength;
+ rsp->resid_len = blk_rq_bytes(rsp) -
+ mpi_reply->ResponseDataLength;
} else {
dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT
"%s - no reply\n", ioc->name, __func__));
@@ -1186,10 +1187,10 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
unmap:
if (dma_addr_out)
- pci_unmap_single(ioc->pdev, dma_addr_out, req->data_len,
+ pci_unmap_single(ioc->pdev, dma_addr_out, blk_rq_bytes(req),
PCI_DMA_BIDIRECTIONAL);
if (dma_addr_in)
- pci_unmap_single(ioc->pdev, dma_addr_in, rsp->data_len,
+ pci_unmap_single(ioc->pdev, dma_addr_in, blk_rq_bytes(rsp),
PCI_DMA_BIDIRECTIONAL);
out:
diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index 2a5f077..d178a8b 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -1299,7 +1299,7 @@ int osd_finalize_request(struct osd_request *or,
return ret;
}
OSD_DEBUG("out bytes=%llu (bytes_req=%u)\n",
- _LLU(or->out.total_bytes), or->out.req->data_len);
+ _LLU(or->out.total_bytes), blk_rq_bytes(or->out.req));
}
if (or->in.bio) {
ret = blk_rq_append_bio(or->request->q, or->in.req, or->in.bio);
@@ -1308,7 +1308,7 @@ int osd_finalize_request(struct osd_request *or,
return ret;
}
OSD_DEBUG("in bytes=%llu (bytes_req=%u)\n",
- _LLU(or->in.total_bytes), or->in.req->data_len);
+ _LLU(or->in.total_bytes), blk_rq_bytes(or->in.req));
}
or->out.pad_buff = sg_out_pad_buffer;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 39b3acf..3d16c70 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -682,14 +682,13 @@ EXPORT_SYMBOL(scsi_release_buffers);
static void scsi_end_bidi_request(struct scsi_cmnd *cmd)
{
struct request *req = cmd->request;
- unsigned int dlen = req->data_len;
- unsigned int next_dlen = req->next_rq->data_len;
req->resid_len = scsi_out(cmd)->resid;
req->next_rq->resid_len = scsi_in(cmd)->resid;
/* The req and req->next_rq have not been completed */
- BUG_ON(blk_end_bidi_request(req, 0, dlen, next_dlen));
+ BUG_ON(blk_end_bidi_request(req, 0, blk_rq_bytes(req),
+ blk_rq_bytes(req->next_rq)));
scsi_release_buffers(cmd);
@@ -966,7 +965,7 @@ static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb,
BUG_ON(count > sdb->table.nents);
sdb->table.nents = count;
if (blk_pc_request(req))
- sdb->length = req->data_len;
+ sdb->length = blk_rq_bytes(req);
else
sdb->length = blk_rq_sectors(req) << 9;
return BLKPREP_OK;
@@ -1087,21 +1086,21 @@ int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req)
if (unlikely(ret))
return ret;
} else {
- BUG_ON(req->data_len);
+ BUG_ON(blk_rq_bytes(req));
memset(&cmd->sdb, 0, sizeof(cmd->sdb));
req->buffer = NULL;
}
cmd->cmd_len = req->cmd_len;
- if (!req->data_len)
+ if (!blk_rq_bytes(req))
cmd->sc_data_direction = DMA_NONE;
else if (rq_data_dir(req) == WRITE)
cmd->sc_data_direction = DMA_TO_DEVICE;
else
cmd->sc_data_direction = DMA_FROM_DEVICE;
- cmd->transfersize = req->data_len;
+ cmd->transfersize = blk_rq_bytes(req);
cmd->allowed = req->retries;
return BLKPREP_OK;
}
diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c
index 48ba413..1030327 100644
--- a/drivers/scsi/scsi_tgt_lib.c
+++ b/drivers/scsi/scsi_tgt_lib.c
@@ -387,7 +387,7 @@ static int scsi_map_user_pages(struct scsi_tgt_cmd *tcmd, struct scsi_cmnd *cmd,
* we use REQ_TYPE_BLOCK_PC so scsi_init_io doesn't set the
* length for us.
*/
- cmd->sdb.length = rq->data_len;
+ cmd->sdb.length = blk_rq_bytes(rq);
return 0;
diff --git a/fs/exofs/osd.c b/fs/exofs/osd.c
index b249ae9..c97420b 100644
--- a/fs/exofs/osd.c
+++ b/fs/exofs/osd.c
@@ -50,10 +50,10 @@ int exofs_check_ok_resid(struct osd_request *or, u64 *in_resid, u64 *out_resid)
/* FIXME: should be include in osd_sense_info */
if (in_resid)
- *in_resid = or->in.req ? or->in.req->data_len : 0;
+ *in_resid = or->in.req ? blk_rq_bytes(or->in.req) : 0;
if (out_resid)
- *out_resid = or->out.req ? or->out.req->data_len : 0;
+ *out_resid = or->out.req ? blk_rq_bytes(or->out.req) : 0;
return ret;
}
--
1.6.0.2
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH 09/10] ide: cleanup rq->data_len usages
2009-04-29 9:13 ` Tejun Heo
@ 2009-04-29 9:13 ` Tejun Heo
-1 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 9:13 UTC (permalink / raw)
To: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petko
Cc: Tejun Heo
With recent unification of fields, it's now guaranteed that
rq->data_len always equals blk_rq_bytes(). Convert all direct users
to accessors.
[ Impact: convert direct rq->data_len usages to blk_rq_bytes() ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
---
drivers/ide/ide-atapi.c | 4 ++--
drivers/ide/ide-cd.c | 25 +++++++------------------
drivers/ide/ide-floppy.c | 4 ++--
drivers/ide/ide-io.c | 2 +-
4 files changed, 12 insertions(+), 23 deletions(-)
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index e4a02a0..792534d 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -255,7 +255,7 @@ void ide_retry_pc(ide_drive_t *drive)
ide_init_pc(pc);
memcpy(pc->c, sense_rq->cmd, 12);
pc->buf = bio_data(sense_rq->bio); /* pointer to mapped address */
- pc->req_xfer = sense_rq->data_len;
+ pc->req_xfer = blk_rq_bytes(sense_rq);
if (drive->media == ide_tape)
set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
@@ -303,7 +303,7 @@ int ide_cd_get_xferlen(struct request *rq)
return 32768;
else if (blk_sense_request(rq) || blk_pc_request(rq) ||
rq->cmd_type == REQ_TYPE_ATA_PC)
- return rq->data_len;
+ return blk_rq_bytes(rq);
else
return 0;
}
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index eb4f3dc..2eadc9d 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -577,7 +577,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
struct request *rq = hwif->rq;
ide_expiry_t *expiry = NULL;
int dma_error = 0, dma, thislen, uptodate = 0;
- int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0, nsectors;
+ int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0;
int sense = blk_sense_request(rq);
unsigned int timeout;
u16 len;
@@ -707,9 +707,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
out_end:
if (blk_pc_request(rq) && rc == 0) {
- if (blk_end_request(rq, 0, rq->data_len))
- BUG();
-
+ blk_end_request_all(rq, 0);
hwif->rq = NULL;
} else {
if (sense && uptodate)
@@ -727,22 +725,14 @@ out_end:
ide_cd_error_cmd(drive, cmd);
/* make sure it's fully ended */
- if (blk_pc_request(rq))
- nsectors = (rq->data_len + 511) >> 9;
- else
- nsectors = blk_rq_sectors(rq);
-
- if (nsectors == 0)
- nsectors = 1;
-
if (blk_fs_request(rq) == 0) {
- rq->resid_len = rq->data_len -
+ rq->resid_len = blk_rq_bytes(rq) -
(cmd->nbytes - cmd->nleft);
if (uptodate == 0 && (cmd->tf_flags & IDE_TFLAG_WRITE))
rq->resid_len += cmd->last_xfer_len;
}
- ide_complete_rq(drive, uptodate ? 0 : -EIO, nsectors << 9);
+ ide_complete_rq(drive, uptodate ? 0 : -EIO, blk_rq_bytes(rq));
if (sense && rc == 2)
ide_error(drive, "request sense failure", stat);
@@ -819,7 +809,7 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
*/
alignment = queue_dma_alignment(q) | q->dma_pad_mask;
if ((unsigned long)buf & alignment
- || rq->data_len & q->dma_pad_mask
+ || blk_rq_bytes(rq) & q->dma_pad_mask
|| object_is_on_stack(buf))
drive->dma = 0;
}
@@ -867,9 +857,8 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
cmd.rq = rq;
- if (blk_fs_request(rq) || rq->data_len) {
- ide_init_sg_cmd(&cmd, blk_fs_request(rq) ?
- (blk_rq_sectors(rq) << 9) : rq->data_len);
+ if (blk_fs_request(rq) || blk_rq_bytes(rq)) {
+ ide_init_sg_cmd(&cmd, blk_rq_bytes(rq));
ide_map_sg(drive, &cmd);
}
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 1c460bd..6509817 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -220,14 +220,14 @@ static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy,
ide_init_pc(pc);
memcpy(pc->c, rq->cmd, sizeof(pc->c));
pc->rq = rq;
- if (rq->data_len) {
+ if (blk_rq_bytes(rq)) {
pc->flags |= PC_FLAG_DMA_OK;
if (rq_data_dir(rq) == WRITE)
pc->flags |= PC_FLAG_WRITING;
}
/* pio will be performed by ide_pio_bytes() which handles sg fine */
pc->buf = NULL;
- pc->req_xfer = pc->buf_size = rq->data_len;
+ pc->req_xfer = pc->buf_size = blk_rq_bytes(rq);
}
static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 59799ca..ca2519d 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -116,7 +116,7 @@ void ide_complete_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat, u8 err)
unsigned int ide_rq_bytes(struct request *rq)
{
if (blk_pc_request(rq))
- return rq->data_len;
+ return blk_rq_bytes(rq);
else
return blk_rq_cur_sectors(rq) << 9;
}
--
1.6.0.2
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH 09/10] ide: cleanup rq->data_len usages
@ 2009-04-29 9:13 ` Tejun Heo
0 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 9:13 UTC (permalink / raw)
To: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, grant.likely, paul.clements,
jesper.juhl, tim, jeremy, adrian, oakad, dwmw2, schwidefsky,
ballabio_dario, davem, rusty, Markus.Lidel, bharrosh
Cc: Tejun Heo
With recent unification of fields, it's now guaranteed that
rq->data_len always equals blk_rq_bytes(). Convert all direct users
to accessors.
[ Impact: convert direct rq->data_len usages to blk_rq_bytes() ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
---
drivers/ide/ide-atapi.c | 4 ++--
drivers/ide/ide-cd.c | 25 +++++++------------------
drivers/ide/ide-floppy.c | 4 ++--
drivers/ide/ide-io.c | 2 +-
4 files changed, 12 insertions(+), 23 deletions(-)
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index e4a02a0..792534d 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -255,7 +255,7 @@ void ide_retry_pc(ide_drive_t *drive)
ide_init_pc(pc);
memcpy(pc->c, sense_rq->cmd, 12);
pc->buf = bio_data(sense_rq->bio); /* pointer to mapped address */
- pc->req_xfer = sense_rq->data_len;
+ pc->req_xfer = blk_rq_bytes(sense_rq);
if (drive->media == ide_tape)
set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
@@ -303,7 +303,7 @@ int ide_cd_get_xferlen(struct request *rq)
return 32768;
else if (blk_sense_request(rq) || blk_pc_request(rq) ||
rq->cmd_type == REQ_TYPE_ATA_PC)
- return rq->data_len;
+ return blk_rq_bytes(rq);
else
return 0;
}
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index eb4f3dc..2eadc9d 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -577,7 +577,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
struct request *rq = hwif->rq;
ide_expiry_t *expiry = NULL;
int dma_error = 0, dma, thislen, uptodate = 0;
- int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0, nsectors;
+ int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0;
int sense = blk_sense_request(rq);
unsigned int timeout;
u16 len;
@@ -707,9 +707,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
out_end:
if (blk_pc_request(rq) && rc == 0) {
- if (blk_end_request(rq, 0, rq->data_len))
- BUG();
-
+ blk_end_request_all(rq, 0);
hwif->rq = NULL;
} else {
if (sense && uptodate)
@@ -727,22 +725,14 @@ out_end:
ide_cd_error_cmd(drive, cmd);
/* make sure it's fully ended */
- if (blk_pc_request(rq))
- nsectors = (rq->data_len + 511) >> 9;
- else
- nsectors = blk_rq_sectors(rq);
-
- if (nsectors == 0)
- nsectors = 1;
-
if (blk_fs_request(rq) == 0) {
- rq->resid_len = rq->data_len -
+ rq->resid_len = blk_rq_bytes(rq) -
(cmd->nbytes - cmd->nleft);
if (uptodate == 0 && (cmd->tf_flags & IDE_TFLAG_WRITE))
rq->resid_len += cmd->last_xfer_len;
}
- ide_complete_rq(drive, uptodate ? 0 : -EIO, nsectors << 9);
+ ide_complete_rq(drive, uptodate ? 0 : -EIO, blk_rq_bytes(rq));
if (sense && rc == 2)
ide_error(drive, "request sense failure", stat);
@@ -819,7 +809,7 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
*/
alignment = queue_dma_alignment(q) | q->dma_pad_mask;
if ((unsigned long)buf & alignment
- || rq->data_len & q->dma_pad_mask
+ || blk_rq_bytes(rq) & q->dma_pad_mask
|| object_is_on_stack(buf))
drive->dma = 0;
}
@@ -867,9 +857,8 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
cmd.rq = rq;
- if (blk_fs_request(rq) || rq->data_len) {
- ide_init_sg_cmd(&cmd, blk_fs_request(rq) ?
- (blk_rq_sectors(rq) << 9) : rq->data_len);
+ if (blk_fs_request(rq) || blk_rq_bytes(rq)) {
+ ide_init_sg_cmd(&cmd, blk_rq_bytes(rq));
ide_map_sg(drive, &cmd);
}
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 1c460bd..6509817 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -220,14 +220,14 @@ static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy,
ide_init_pc(pc);
memcpy(pc->c, rq->cmd, sizeof(pc->c));
pc->rq = rq;
- if (rq->data_len) {
+ if (blk_rq_bytes(rq)) {
pc->flags |= PC_FLAG_DMA_OK;
if (rq_data_dir(rq) == WRITE)
pc->flags |= PC_FLAG_WRITING;
}
/* pio will be performed by ide_pio_bytes() which handles sg fine */
pc->buf = NULL;
- pc->req_xfer = pc->buf_size = rq->data_len;
+ pc->req_xfer = pc->buf_size = blk_rq_bytes(rq);
}
static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 59799ca..ca2519d 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -116,7 +116,7 @@ void ide_complete_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat, u8 err)
unsigned int ide_rq_bytes(struct request *rq)
{
if (blk_pc_request(rq))
- return rq->data_len;
+ return blk_rq_bytes(rq);
else
return blk_rq_cur_sectors(rq) << 9;
}
--
1.6.0.2
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH 10/10] block: hide request sector and data_len
2009-04-29 9:13 ` Tejun Heo
@ 2009-04-29 9:13 ` Tejun Heo
-1 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 9:13 UTC (permalink / raw)
To: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petko
Cc: Tejun Heo
Block low level drivers for some reason have been pretty good at
abusing block layer API. Especially struct request's fields tend to
get violated in all possible ways. Make it clear that low level
drivers MUST NOT access or manipulate rq->sector and rq->data_len
directly by prefixing them with double underscores.
This change is also necessary to break build of out-of-tree codes
which assume the previous block API where internal fields can be
manipulated and rq->data_len carries residual count on completion.
[ Impact: hide internal fields, block API change ]
Signed-off-by: Tejun Heo <tj@kernel.org>
---
block/blk-core.c | 20 ++++++++++----------
block/blk-map.c | 2 +-
block/blk-merge.c | 2 +-
include/linux/blkdev.h | 9 +++++----
4 files changed, 17 insertions(+), 16 deletions(-)
diff --git a/block/blk-core.c b/block/blk-core.c
index 3596ca7..6226a38 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -127,7 +127,7 @@ void blk_rq_init(struct request_queue *q, struct request *rq)
INIT_LIST_HEAD(&rq->timeout_list);
rq->cpu = -1;
rq->q = q;
- rq->sector = (sector_t) -1;
+ rq->__sector = (sector_t) -1;
INIT_HLIST_NODE(&rq->hash);
RB_CLEAR_NODE(&rq->rb_node);
rq->cmd = rq->__cmd;
@@ -1095,7 +1095,7 @@ void init_request_from_bio(struct request *req, struct bio *bio)
req->cmd_flags |= REQ_NOIDLE;
req->errors = 0;
- req->sector = bio->bi_sector;
+ req->__sector = bio->bi_sector;
req->ioprio = bio_prio(bio);
blk_rq_bio_prep(req->q, req, bio);
}
@@ -1143,7 +1143,7 @@ static int __make_request(struct request_queue *q, struct bio *bio)
req->biotail->bi_next = bio;
req->biotail = bio;
- req->data_len += bytes;
+ req->__data_len += bytes;
req->ioprio = ioprio_best(req->ioprio, prio);
if (!blk_rq_cpu_valid(req))
req->cpu = bio->bi_comp_cpu;
@@ -1169,8 +1169,8 @@ static int __make_request(struct request_queue *q, struct bio *bio)
* not touch req->buffer either...
*/
req->buffer = bio_data(bio);
- req->sector = bio->bi_sector;
- req->data_len += bytes;
+ req->__sector = bio->bi_sector;
+ req->__data_len += bytes;
req->ioprio = ioprio_best(req->ioprio, prio);
if (!blk_rq_cpu_valid(req))
req->cpu = bio->bi_comp_cpu;
@@ -1878,7 +1878,7 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
* can find how many bytes remain in the request
* later.
*/
- req->data_len = 0;
+ req->__data_len = 0;
return false;
}
@@ -1892,12 +1892,12 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
bio_iovec(bio)->bv_len -= nr_bytes;
}
- req->data_len -= total_bytes;
+ req->__data_len -= total_bytes;
req->buffer = bio_data(req->bio);
/* update sector only for requests with clear definition of sector */
if (blk_fs_request(req) || blk_discard_rq(req))
- req->sector += total_bytes >> 9;
+ req->__sector += total_bytes >> 9;
/*
* If total number of sectors is less than the first segment
@@ -1905,7 +1905,7 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
*/
if (blk_rq_bytes(req) < blk_rq_cur_bytes(req)) {
printk(KERN_ERR "blk: request botched\n");
- req->data_len = blk_rq_cur_bytes(req);
+ req->__data_len = blk_rq_cur_bytes(req);
}
/* recalculate the number of segments */
@@ -2032,7 +2032,7 @@ void blk_rq_bio_prep(struct request_queue *q, struct request *rq,
rq->nr_phys_segments = bio_phys_segments(q, bio);
rq->buffer = bio_data(bio);
}
- rq->data_len = bio->bi_size;
+ rq->__data_len = bio->bi_size;
rq->bio = rq->biotail = bio;
if (bio->bi_bdev)
diff --git a/block/blk-map.c b/block/blk-map.c
index 694fefa..56082be 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -20,7 +20,7 @@ int blk_rq_append_bio(struct request_queue *q, struct request *rq,
rq->biotail->bi_next = bio;
rq->biotail = bio;
- rq->data_len += bio->bi_size;
+ rq->__data_len += bio->bi_size;
}
return 0;
}
diff --git a/block/blk-merge.c b/block/blk-merge.c
index b8df66a..4974dd5 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -370,7 +370,7 @@ static int attempt_merge(struct request_queue *q, struct request *req,
req->biotail->bi_next = next->bio;
req->biotail = next->biotail;
- req->data_len += blk_rq_bytes(next);
+ req->__data_len += blk_rq_bytes(next);
elv_merge_requests(q, req, next);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 943cbfe..feb991e 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -166,8 +166,9 @@ struct request {
enum rq_cmd_type_bits cmd_type;
unsigned long atomic_flags;
- sector_t sector; /* sector cursor */
- unsigned int data_len; /* total data len, don't access directly */
+ /* the following two fields are internal, NEVER access directly */
+ sector_t __sector; /* sector cursor */
+ unsigned int __data_len; /* total data len */
struct bio *bio;
struct bio *biotail;
@@ -828,12 +829,12 @@ extern void blkdev_dequeue_request(struct request *req);
*/
static inline sector_t blk_rq_pos(struct request *rq)
{
- return rq->sector;
+ return rq->__sector;
}
static inline unsigned int blk_rq_bytes(struct request *rq)
{
- return rq->data_len;
+ return rq->__data_len;
}
static inline int blk_rq_cur_bytes(struct request *rq)
--
1.6.0.2
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH 10/10] block: hide request sector and data_len
@ 2009-04-29 9:13 ` Tejun Heo
0 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 9:13 UTC (permalink / raw)
To: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, grant.likely, paul.clements,
jesper.juhl, tim, jeremy, adrian, oakad, dwmw2, schwidefsky,
ballabio_dario, davem, rusty, Markus.Lidel, bharrosh
Cc: Tejun Heo
Block low level drivers for some reason have been pretty good at
abusing block layer API. Especially struct request's fields tend to
get violated in all possible ways. Make it clear that low level
drivers MUST NOT access or manipulate rq->sector and rq->data_len
directly by prefixing them with double underscores.
This change is also necessary to break build of out-of-tree codes
which assume the previous block API where internal fields can be
manipulated and rq->data_len carries residual count on completion.
[ Impact: hide internal fields, block API change ]
Signed-off-by: Tejun Heo <tj@kernel.org>
---
block/blk-core.c | 20 ++++++++++----------
block/blk-map.c | 2 +-
block/blk-merge.c | 2 +-
include/linux/blkdev.h | 9 +++++----
4 files changed, 17 insertions(+), 16 deletions(-)
diff --git a/block/blk-core.c b/block/blk-core.c
index 3596ca7..6226a38 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -127,7 +127,7 @@ void blk_rq_init(struct request_queue *q, struct request *rq)
INIT_LIST_HEAD(&rq->timeout_list);
rq->cpu = -1;
rq->q = q;
- rq->sector = (sector_t) -1;
+ rq->__sector = (sector_t) -1;
INIT_HLIST_NODE(&rq->hash);
RB_CLEAR_NODE(&rq->rb_node);
rq->cmd = rq->__cmd;
@@ -1095,7 +1095,7 @@ void init_request_from_bio(struct request *req, struct bio *bio)
req->cmd_flags |= REQ_NOIDLE;
req->errors = 0;
- req->sector = bio->bi_sector;
+ req->__sector = bio->bi_sector;
req->ioprio = bio_prio(bio);
blk_rq_bio_prep(req->q, req, bio);
}
@@ -1143,7 +1143,7 @@ static int __make_request(struct request_queue *q, struct bio *bio)
req->biotail->bi_next = bio;
req->biotail = bio;
- req->data_len += bytes;
+ req->__data_len += bytes;
req->ioprio = ioprio_best(req->ioprio, prio);
if (!blk_rq_cpu_valid(req))
req->cpu = bio->bi_comp_cpu;
@@ -1169,8 +1169,8 @@ static int __make_request(struct request_queue *q, struct bio *bio)
* not touch req->buffer either...
*/
req->buffer = bio_data(bio);
- req->sector = bio->bi_sector;
- req->data_len += bytes;
+ req->__sector = bio->bi_sector;
+ req->__data_len += bytes;
req->ioprio = ioprio_best(req->ioprio, prio);
if (!blk_rq_cpu_valid(req))
req->cpu = bio->bi_comp_cpu;
@@ -1878,7 +1878,7 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
* can find how many bytes remain in the request
* later.
*/
- req->data_len = 0;
+ req->__data_len = 0;
return false;
}
@@ -1892,12 +1892,12 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
bio_iovec(bio)->bv_len -= nr_bytes;
}
- req->data_len -= total_bytes;
+ req->__data_len -= total_bytes;
req->buffer = bio_data(req->bio);
/* update sector only for requests with clear definition of sector */
if (blk_fs_request(req) || blk_discard_rq(req))
- req->sector += total_bytes >> 9;
+ req->__sector += total_bytes >> 9;
/*
* If total number of sectors is less than the first segment
@@ -1905,7 +1905,7 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
*/
if (blk_rq_bytes(req) < blk_rq_cur_bytes(req)) {
printk(KERN_ERR "blk: request botched\n");
- req->data_len = blk_rq_cur_bytes(req);
+ req->__data_len = blk_rq_cur_bytes(req);
}
/* recalculate the number of segments */
@@ -2032,7 +2032,7 @@ void blk_rq_bio_prep(struct request_queue *q, struct request *rq,
rq->nr_phys_segments = bio_phys_segments(q, bio);
rq->buffer = bio_data(bio);
}
- rq->data_len = bio->bi_size;
+ rq->__data_len = bio->bi_size;
rq->bio = rq->biotail = bio;
if (bio->bi_bdev)
diff --git a/block/blk-map.c b/block/blk-map.c
index 694fefa..56082be 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -20,7 +20,7 @@ int blk_rq_append_bio(struct request_queue *q, struct request *rq,
rq->biotail->bi_next = bio;
rq->biotail = bio;
- rq->data_len += bio->bi_size;
+ rq->__data_len += bio->bi_size;
}
return 0;
}
diff --git a/block/blk-merge.c b/block/blk-merge.c
index b8df66a..4974dd5 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -370,7 +370,7 @@ static int attempt_merge(struct request_queue *q, struct request *req,
req->biotail->bi_next = next->bio;
req->biotail = next->biotail;
- req->data_len += blk_rq_bytes(next);
+ req->__data_len += blk_rq_bytes(next);
elv_merge_requests(q, req, next);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 943cbfe..feb991e 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -166,8 +166,9 @@ struct request {
enum rq_cmd_type_bits cmd_type;
unsigned long atomic_flags;
- sector_t sector; /* sector cursor */
- unsigned int data_len; /* total data len, don't access directly */
+ /* the following two fields are internal, NEVER access directly */
+ sector_t __sector; /* sector cursor */
+ unsigned int __data_len; /* total data len */
struct bio *bio;
struct bio *biotail;
@@ -828,12 +829,12 @@ extern void blkdev_dequeue_request(struct request *req);
*/
static inline sector_t blk_rq_pos(struct request *rq)
{
- return rq->sector;
+ return rq->__sector;
}
static inline unsigned int blk_rq_bytes(struct request *rq)
{
- return rq->data_len;
+ return rq->__data_len;
}
static inline int blk_rq_cur_bytes(struct request *rq)
--
1.6.0.2
^ permalink raw reply related [flat|nested] 56+ messages in thread
* Re: [PATCH 04/10] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
2009-04-29 9:13 ` Tejun Heo
@ 2009-04-29 9:25 ` Geert Uytterhoeven
-1 siblings, 0 replies; 56+ messages in thread
From: Geert Uytterhoeven @ 2009-04-29 9:25 UTC (permalink / raw)
To: Tejun Heo
Cc: axboe, Linux Kernel Development, linux-scsi, jeff, linux-ide,
James E.J. Bottomley, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
sfr, grant.likely, paul.clements, jesper.juhl, tim, jeremy,
adrian, oakad, David Woodhouse, schwidefsky, ballabio_dario,
David S. Miller, Paul Russell, Markus.Lidel, bharrosh
On Wed, 29 Apr 2009, Tejun Heo wrote:
> Implement accessors - blk_rq_pos(), blk_rq_sectors() and
> blk_rq_cur_sectors() which return rq->sector, rq->hard_nr_sectors and
> rq->hard_cur_sectors respectively and convert direct references of the
> said fields to the accessors.
>
> This is in preparation of request data length handling cleanup.
>
> [ Impact: cleanup ]
>
> Signed-off-by: Tejun Heo <tj@kernel.org>
> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
> drivers/block/ps3disk.c | 2 +-
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
> --- a/include/linux/blkdev.h
> +++ b/include/linux/blkdev.h
> @@ -832,13 +832,30 @@ static inline void blk_run_address_space(struct address_space *mapping)
> extern void blkdev_dequeue_request(struct request *req);
>
> /*
> - * blk_end_request() takes bytes instead of sectors as a complete size.
> - * blk_rq_bytes() returns bytes left to complete in the entire request.
> - * blk_rq_cur_bytes() returns bytes left to complete in the current segment.
> + * blk_rq_pos() : the current sector
> + * blk_rq_bytes() : bytes left in the entire request
> + * blk_rq_cur_bytes() : bytes left in the current segment
> + * blk_rq_sectors() : sectors left in the entire request
> + * blk_rq_cur_sectors() : sectors left in the current segment
> */
> +static inline sector_t blk_rq_pos(struct request *rq)
^
const?
> +{
> + return rq->hard_sector;
> +}
> +
> extern unsigned int blk_rq_bytes(struct request *rq);
> extern unsigned int blk_rq_cur_bytes(struct request *rq);
>
> +static inline unsigned int blk_rq_sectors(struct request *rq)
^
const?
> +{
> + return rq->hard_nr_sectors;
> +}
> +
> +static inline unsigned int blk_rq_cur_sectors(struct request *rq)
^
const?
> +{
> + return rq->hard_cur_sectors;
> +}
> +
With kind regards,
Geert Uytterhoeven
Software Architect
Techsoft Centre
Technology and Software Centre Europe
The Corporate Village · Da Vincilaan 7-D1 · B-1935 Zaventem · Belgium
Phone: +32 (0)2 700 8453
Fax: +32 (0)2 700 8622
E-mail: Geert.Uytterhoeven@sonycom.com
Internet: http://www.sony-europe.com/
A division of Sony Europe (Belgium) N.V.
VAT BE 0413.825.160 · RPR Brussels
Fortis · BIC GEBABEBB · IBAN BE41293037680010
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 04/10] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
@ 2009-04-29 9:25 ` Geert Uytterhoeven
0 siblings, 0 replies; 56+ messages in thread
From: Geert Uytterhoeven @ 2009-04-29 9:25 UTC (permalink / raw)
To: Tejun Heo
Cc: axboe, Linux Kernel Development, linux-scsi, jeff, linux-ide,
James E.J. Bottomley, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
sfr, grant.likely, paul.clements, jesper.juhl, tim, jeremy,
adrian, oakad, David Woodhouse, schwidefsky, ballabio_dario,
David S. Miller, Paul Russell, Markus.Lidel, bharrosh
On Wed, 29 Apr 2009, Tejun Heo wrote:
> Implement accessors - blk_rq_pos(), blk_rq_sectors() and
> blk_rq_cur_sectors() which return rq->sector, rq->hard_nr_sectors and
> rq->hard_cur_sectors respectively and convert direct references of the
> said fields to the accessors.
>
> This is in preparation of request data length handling cleanup.
>
> [ Impact: cleanup ]
>
> Signed-off-by: Tejun Heo <tj@kernel.org>
> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
> drivers/block/ps3disk.c | 2 +-
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
> --- a/include/linux/blkdev.h
> +++ b/include/linux/blkdev.h
> @@ -832,13 +832,30 @@ static inline void blk_run_address_space(struct address_space *mapping)
> extern void blkdev_dequeue_request(struct request *req);
>
> /*
> - * blk_end_request() takes bytes instead of sectors as a complete size.
> - * blk_rq_bytes() returns bytes left to complete in the entire request.
> - * blk_rq_cur_bytes() returns bytes left to complete in the current segment.
> + * blk_rq_pos() : the current sector
> + * blk_rq_bytes() : bytes left in the entire request
> + * blk_rq_cur_bytes() : bytes left in the current segment
> + * blk_rq_sectors() : sectors left in the entire request
> + * blk_rq_cur_sectors() : sectors left in the current segment
> */
> +static inline sector_t blk_rq_pos(struct request *rq)
^
const?
> +{
> + return rq->hard_sector;
> +}
> +
> extern unsigned int blk_rq_bytes(struct request *rq);
> extern unsigned int blk_rq_cur_bytes(struct request *rq);
>
> +static inline unsigned int blk_rq_sectors(struct request *rq)
^
const?
> +{
> + return rq->hard_nr_sectors;
> +}
> +
> +static inline unsigned int blk_rq_cur_sectors(struct request *rq)
^
const?
> +{
> + return rq->hard_cur_sectors;
> +}
> +
With kind regards,
Geert Uytterhoeven
Software Architect
Techsoft Centre
Technology and Software Centre Europe
The Corporate Village · Da Vincilaan 7-D1 · B-1935 Zaventem · Belgium
Phone: +32 (0)2 700 8453
Fax: +32 (0)2 700 8622
E-mail: Geert.Uytterhoeven@sonycom.com
Internet: http://www.sony-europe.com/
A division of Sony Europe (Belgium) N.V.
VAT BE 0413.825.160 · RPR Brussels
Fortis · BIC GEBABEBB · IBAN BE41293037680010
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 05/10] block: convert to pos and nr_sectors accessors
2009-04-29 9:13 ` Tejun Heo
@ 2009-04-29 9:40 ` Geert Uytterhoeven
-1 siblings, 0 replies; 56+ messages in thread
From: Geert Uytterhoeven @ 2009-04-29 9:40 UTC (permalink / raw)
To: Tejun Heo
Cc: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
sfr, grant.likely, paul.clements, jesper.juhl, tim, jeremy,
adrian, oakad, dwmw2, schwidefsky, ballabio_dario, davem, rusty,
Markus.Lidel, bharrosh, Jeff Garzik
On Wed, 29 Apr 2009, Tejun Heo wrote:
> With recent cleanups, there is no place where low level driver
> directly manipulates request fields. This means that the 'hard'
> request fields always equal the !hard fields. Convert all
> rq->sectors, nr_sectors and current_nr_sectors references to
> accessors.
>
> [ Impact: use pos and nr_sectors accessors ]
>
> Signed-off-by: Tejun Heo <tj@kernel.org>
> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
> drivers/block/amiflop.c | 6 ++--
> drivers/block/ataflop.c | 10 +++---
> drivers/block/ps3disk.c | 9 ++---
> drivers/block/swim3.c | 34 ++++++++++++----------
> drivers/block/z2ram.c | 6 ++--
Looks OK, so
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
> diff --git a/drivers/block/z2ram.c b/drivers/block/z2ram.c
> index b66ad58..d4e6b71 100644
> --- a/drivers/block/z2ram.c
> +++ b/drivers/block/z2ram.c
> @@ -71,12 +71,12 @@ static void do_z2_request(struct request_queue *q)
> {
> struct request *req;
> while ((req = elv_next_request(q)) != NULL) {
> - unsigned long start = req->sector << 9;
> - unsigned long len = req->current_nr_sectors << 9;
> + unsigned long start = blk_rq_pos(req) << 9;
> + unsigned long len = blk_rq_cur_sectors(req) << 9;
^^^^^^^^^^^^^
I guess this one can become `unsigned int' now, as:
static inline unsigned int blk_rq_cur_sectors(struct request *rq)
{
return blk_rq_cur_bytes(rq) >> 9;
}
and blk_rq_cur_bytes(rq) returns `int', so it must fit in an `int' anyway?
With kind regards,
Geert Uytterhoeven
Software Architect
Techsoft Centre
Technology and Software Centre Europe
The Corporate Village · Da Vincilaan 7-D1 · B-1935 Zaventem · Belgium
Phone: +32 (0)2 700 8453
Fax: +32 (0)2 700 8622
E-mail: Geert.Uytterhoeven@sonycom.com
Internet: http://www.sony-europe.com/
A division of Sony Europe (Belgium) N.V.
VAT BE 0413.825.160 · RPR Brussels
Fortis · BIC GEBABEBB · IBAN BE41293037680010
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 05/10] block: convert to pos and nr_sectors accessors
@ 2009-04-29 9:40 ` Geert Uytterhoeven
0 siblings, 0 replies; 56+ messages in thread
From: Geert Uytterhoeven @ 2009-04-29 9:40 UTC (permalink / raw)
To: Tejun Heo
Cc: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
sfr, grant.likely, paul.clements, jesper.juhl, tim, jeremy,
adrian, oakad, dwmw2, schwidefsky, ballabio_dario, davem, rusty,
Markus.Lidel, bharrosh, Jeff Garzik
On Wed, 29 Apr 2009, Tejun Heo wrote:
> With recent cleanups, there is no place where low level driver
> directly manipulates request fields. This means that the 'hard'
> request fields always equal the !hard fields. Convert all
> rq->sectors, nr_sectors and current_nr_sectors references to
> accessors.
>
> [ Impact: use pos and nr_sectors accessors ]
>
> Signed-off-by: Tejun Heo <tj@kernel.org>
> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
> drivers/block/amiflop.c | 6 ++--
> drivers/block/ataflop.c | 10 +++---
> drivers/block/ps3disk.c | 9 ++---
> drivers/block/swim3.c | 34 ++++++++++++----------
> drivers/block/z2ram.c | 6 ++--
Looks OK, so
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
> diff --git a/drivers/block/z2ram.c b/drivers/block/z2ram.c
> index b66ad58..d4e6b71 100644
> --- a/drivers/block/z2ram.c
> +++ b/drivers/block/z2ram.c
> @@ -71,12 +71,12 @@ static void do_z2_request(struct request_queue *q)
> {
> struct request *req;
> while ((req = elv_next_request(q)) != NULL) {
> - unsigned long start = req->sector << 9;
> - unsigned long len = req->current_nr_sectors << 9;
> + unsigned long start = blk_rq_pos(req) << 9;
> + unsigned long len = blk_rq_cur_sectors(req) << 9;
^^^^^^^^^^^^^
I guess this one can become `unsigned int' now, as:
static inline unsigned int blk_rq_cur_sectors(struct request *rq)
{
return blk_rq_cur_bytes(rq) >> 9;
}
and blk_rq_cur_bytes(rq) returns `int', so it must fit in an `int' anyway?
With kind regards,
Geert Uytterhoeven
Software Architect
Techsoft Centre
Technology and Software Centre Europe
The Corporate Village · Da Vincilaan 7-D1 · B-1935 Zaventem · Belgium
Phone: +32 (0)2 700 8453
Fax: +32 (0)2 700 8622
E-mail: Geert.Uytterhoeven@sonycom.com
Internet: http://www.sony-europe.com/
A division of Sony Europe (Belgium) N.V.
VAT BE 0413.825.160 · RPR Brussels
Fortis · BIC GEBABEBB · IBAN BE41293037680010
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 04/10] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
2009-04-29 9:25 ` Geert Uytterhoeven
(?)
@ 2009-04-29 10:16 ` Tejun Heo
-1 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 10:16 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: axboe, Linux Kernel Development, linux-scsi, jeff, linux-ide,
James E.J. Bottomley, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
sfr, grant.likely, paul.clements, jesper.juhl, tim, jeremy,
adrian, oakad, David Woodhouse, schwidefsky, ballabio_dario,
David S. Miller, Paul Russell, Markus.Lidel, bharrosh
>> +static inline sector_t blk_rq_pos(struct request *rq)
> ^
> const?
>> +{
>> + return rq->hard_sector;
>> +}
>> +
>> extern unsigned int blk_rq_bytes(struct request *rq);
>> extern unsigned int blk_rq_cur_bytes(struct request *rq);
>>
>> +static inline unsigned int blk_rq_sectors(struct request *rq)
> ^
> const?
>> +{
>> + return rq->hard_nr_sectors;
>> +}
>> +
>> +static inline unsigned int blk_rq_cur_sectors(struct request *rq)
> ^
> const?
>> +{
>> + return rq->hard_cur_sectors;
>> +}
>> +
consts and acked-by added.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 05/10] block: convert to pos and nr_sectors accessors
2009-04-29 9:40 ` Geert Uytterhoeven
(?)
@ 2009-04-29 10:19 ` Tejun Heo
-1 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-29 10:19 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
sfr, grant.likely, paul.clements, jesper.juhl, tim, jeremy,
adrian, oakad, dwmw2, schwidefsky, ballabio_dario, davem, rusty,
Markus.Lidel, bharrosh, Jeff Garzik
Hello,
Geert Uytterhoeven wrote:
>> diff --git a/drivers/block/z2ram.c b/drivers/block/z2ram.c
>> index b66ad58..d4e6b71 100644
>> --- a/drivers/block/z2ram.c
>> +++ b/drivers/block/z2ram.c
>> @@ -71,12 +71,12 @@ static void do_z2_request(struct request_queue *q)
>> {
>> struct request *req;
>> while ((req = elv_next_request(q)) != NULL) {
>> - unsigned long start = req->sector << 9;
>> - unsigned long len = req->current_nr_sectors << 9;
>> + unsigned long start = blk_rq_pos(req) << 9;
>> + unsigned long len = blk_rq_cur_sectors(req) << 9;
> ^^^^^^^^^^^^^
> I guess this one can become `unsigned int' now, as:
>
> static inline unsigned int blk_rq_cur_sectors(struct request *rq)
> {
> return blk_rq_cur_bytes(rq) >> 9;
> }
>
> and blk_rq_cur_bytes(rq) returns `int', so it must fit in an `int' anyway?
Yeap, it should fit. Given the way len is used there and the previous
usage had the same type promotion there, I think it's better to leave
the unsigned long alone there.
Acked-by added. Thanks.
--
tejun
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 04/10] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
2009-04-29 9:13 ` Tejun Heo
(?)
(?)
@ 2009-04-29 14:18 ` Stephen Rothwell
-1 siblings, 0 replies; 56+ messages in thread
From: Stephen Rothwell @ 2009-04-29 14:18 UTC (permalink / raw)
To: Tejun Heo
Cc: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, grant.likely, paul.clements, jesper.juhl,
tim, jeremy, adrian, oakad, dwmw2, schwidefsky, ballabio_dario,
davem, rusty, Markus.Lidel, bharrosh
[-- Attachment #1: Type: text/plain, Size: 282 bytes --]
On Wed, 29 Apr 2009 18:13:42 +0900 Tejun Heo <tj@kernel.org> wrote:
>
> drivers/block/viodasd.c | 6 +++---
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 03/10] block: add rq->resid_len
2009-04-29 9:13 ` Tejun Heo
(?)
@ 2009-04-29 14:41 ` James Bottomley
2009-04-30 1:59 ` Tejun Heo
-1 siblings, 1 reply; 56+ messages in thread
From: James Bottomley @ 2009-04-29 14:41 UTC (permalink / raw)
To: Tejun Heo
Cc: axboe, linux-kernel, jeff, linux-ide, linux-scsi, bzolnier,
petkovbb, sshtylyov, mike.miller, chirag.kantharia, Eric.Moore,
stern, fujita.tomonori, zaitcev, Geert.Uytterhoeven, sfr,
grant.likely, paul.clements, jesper.juhl, tim, jeremy, adrian,
oakad, dwmw2, schwidefsky, ballabio_dario, davem, rusty,
Markus.Lidel, bharrosh, Doug Gilbert, Darrick J. Wong
On Wed, 2009-04-29 at 18:13 +0900, Tejun Heo wrote:
> rq->data_len served two purposes - the length of data buffer on issue
> and the residual count on completion. This duality creates some
> headaches.
>
> First of all, block layer and low level drivers can't really determine
> what rq->data_len contains while a request is executing. It could be
> the total request length or it coulde be anything else one of the
> lower layers is using to keep track of residual count. This
> complicates things because blk_rq_bytes() and thus
> [__]blk_end_request_all() relies on rq->data_len for PC commands.
> Drivers which want to report residual count should first cache the
> total request length, update rq->data_len and then complete the
> request with the cached data length.
>
> Secondly, it makes requests default to reporting full residual count,
> ie. reporting that no data transfer occurred. The residual count is
> an exception not the norm; however, the driver should clear
> rq->data_len to zero to signify the normal cases while leaving it
> alone means no data transfer occurred at all. This reverse default
> behavior complicates code unnecessarily and renders block PC on some
> drivers (ide-tape/floppy) unuseable.
>
> This patch adds rq->resid_len which is used only for residual count.
>
> While at it, remove now unnecessasry blk_rq_bytes() caching in
> ide_pc_intr() as rq->data_len is not changed anymore.
>
> [ Impact: cleanup residual count handling, report 0 resid by default ]
This looks good (although I'd like to test it first).
Might it not be better to have an accessor setting resid_len? All the
other patches in the series insulate users from the actual members of
struct request by accessors, so this is a bit the odd man out.
James
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 05/10] block: convert to pos and nr_sectors accessors
2009-04-29 9:13 ` Tejun Heo
(?)
(?)
@ 2009-04-29 14:48 ` Grant Likely
-1 siblings, 0 replies; 56+ messages in thread
From: Grant Likely @ 2009-04-29 14:48 UTC (permalink / raw)
To: Tejun Heo
Cc: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, paul.clements, jesper.juhl, tim, jeremy,
adrian, oakad, dwmw2, schwidefsky, ballabio_dario, davem, rusty,
Markus.Lidel, bharrosh, Jeff Garzik
On Wed, Apr 29, 2009 at 3:13 AM, Tejun Heo <tj@kernel.org> wrote:
> With recent cleanups, there is no place where low level driver
> directly manipulates request fields. This means that the 'hard'
> request fields always equal the !hard fields. Convert all
> rq->sectors, nr_sectors and current_nr_sectors references to
> accessors.
>
> [ Impact: use pos and nr_sectors accessors ]
>
> ---
[...]
> drivers/block/xsysace.c | 17 ++++++-----
Tested-by: and Acked-by: Grant Likely <grant.likely@secretlab.ca>
g.
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 04/10] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
2009-04-29 9:13 ` Tejun Heo
@ 2009-04-29 14:49 ` Grant Likely
-1 siblings, 0 replies; 56+ messages in thread
From: Grant Likely @ 2009-04-29 14:49 UTC (permalink / raw)
To: Tejun Heo
Cc: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, paul.clements, jesper.juhl, tim, jeremy,
adrian, oakad, dwmw2, schwidefsky, ballabio_dario, davem, rusty,
Markus.Lidel, bharrosh
On Wed, Apr 29, 2009 at 3:13 AM, Tejun Heo <tj@kernel.org> wrote:
> Implement accessors - blk_rq_pos(), blk_rq_sectors() and
> blk_rq_cur_sectors() which return rq->sector, rq->hard_nr_sectors and
> rq->hard_cur_sectors respectively and convert direct references of the
> said fields to the accessors.
>
> This is in preparation of request data length handling cleanup.
>
> [ Impact: cleanup ]
> ---
[...]
> drivers/block/xsysace.c | 10 +++++-----
Tested-by: and Acked-by: Grant Likely <grant.likely@secretlab.ca>
g.
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 04/10] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
@ 2009-04-29 14:49 ` Grant Likely
0 siblings, 0 replies; 56+ messages in thread
From: Grant Likely @ 2009-04-29 14:49 UTC (permalink / raw)
To: Tejun Heo
Cc: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, paul.clements, jesper.juhl, tim, jeremy,
adrian, oakad, dwmw2, schwidefsky, ballabio_dario, davem, rusty,
Markus.Lidel, bharrosh
On Wed, Apr 29, 2009 at 3:13 AM, Tejun Heo <tj@kernel.org> wrote:
> Implement accessors - blk_rq_pos(), blk_rq_sectors() and
> blk_rq_cur_sectors() which return rq->sector, rq->hard_nr_sectors and
> rq->hard_cur_sectors respectively and convert direct references of the
> said fields to the accessors.
>
> This is in preparation of request data length handling cleanup.
>
> [ Impact: cleanup ]
> ---
[...]
> drivers/block/xsysace.c | 10 +++++-----
Tested-by: and Acked-by: Grant Likely <grant.likely@secretlab.ca>
g.
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 03/10] block: add rq->resid_len
2009-04-29 14:41 ` James Bottomley
@ 2009-04-30 1:59 ` Tejun Heo
2009-04-30 6:45 ` Borislav Petkov
0 siblings, 1 reply; 56+ messages in thread
From: Tejun Heo @ 2009-04-30 1:59 UTC (permalink / raw)
To: James Bottomley
Cc: axboe, linux-kernel, jeff, linux-ide, linux-scsi, bzolnier,
petkovbb, sshtylyov, mike.miller, chirag.kantharia, Eric.Moore,
stern, fujita.tomonori, zaitcev, Geert.Uytterhoeven, sfr,
grant.likely, paul.clements, jesper.juhl, tim, jeremy, adrian,
oakad, dwmw2, schwidefsky, ballabio_dario, davem, rusty,
Markus.Lidel, bharrosh, Doug Gilbert, Darrick J. Wong
Hello, James.
James Bottomley wrote:
> This looks good (although I'd like to test it first).
Yeah, this will need quite a bit of testing.
> Might it not be better to have an accessor setting resid_len? All
> the other patches in the series insulate users from the actual
> members of struct request by accessors, so this is a bit the odd man
> out.
I actually think it's better to expose resid_len in this case as the
semantics of the field is - initialized to zero on issue, contains
residual count on completion and whatever it contains inbetween is
upto the low level driver. Request position or length are different
as they must contain well defined values throughout request processing
and both block layer and low level driver should agree on what they
mean.
Fancy words aside, it basically boils down to allowing llds to do
either "rq->resid_len = blk_rq_bytes() - xferred" on completion or
"rq->resid_len = blk_rq_bytes()" on issue and "rq->resid_len -=
increments" while processing.
It would be better to check that the value is sane on completion tho.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 02/10] ide-tape: don't initialize rq->sector for rw requests
2009-04-29 9:13 ` Tejun Heo
(?)
@ 2009-04-30 6:14 ` Borislav Petkov
-1 siblings, 0 replies; 56+ messages in thread
From: Borislav Petkov @ 2009-04-30 6:14 UTC (permalink / raw)
To: Tejun Heo
Cc: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, grant.likely, paul.clements,
jesper.juhl, tim, jeremy, adrian, oakad, dwmw2, schwidefsky,
ballabio_dario, davem, rusty, Markus.Lidel, bharrosh
On Wed, Apr 29, 2009 at 06:13:40PM +0900, Tejun Heo wrote:
> rq->sector is set to the tape->first_frame but it's never actually
> used and not even in the correct unit (512 byte sectors). Don't set
> it.
>
> [ Impact: cleanup ]
>
> Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
--
Regards/Gruss,
Boris.
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 03/10] block: add rq->resid_len
2009-04-30 1:59 ` Tejun Heo
@ 2009-04-30 6:45 ` Borislav Petkov
2009-04-30 7:19 ` Tejun Heo
2009-04-30 7:19 ` Tejun Heo
0 siblings, 2 replies; 56+ messages in thread
From: Borislav Petkov @ 2009-04-30 6:45 UTC (permalink / raw)
To: Tejun Heo
Cc: James Bottomley, axboe, linux-kernel, jeff, linux-ide,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, grant.likely, paul.clements,
jesper.juhl, tim, jeremy, adrian, oakad, dwmw2, schwidefsky,
ballabio_dario, davem, rusty, Markus.Lidel, bharrosh,
Doug Gilbert, Darrick J. Wong
On Thu, Apr 30, 2009 at 10:59:10AM +0900, Tejun Heo wrote:
> Hello, James.
>
> James Bottomley wrote:
> > This looks good (although I'd like to test it first).
>
> Yeah, this will need quite a bit of testing.
>
> > Might it not be better to have an accessor setting resid_len? All
> > the other patches in the series insulate users from the actual
> > members of struct request by accessors, so this is a bit the odd man
> > out.
>
> I actually think it's better to expose resid_len in this case as the
> semantics of the field is - initialized to zero on issue, contains
> residual count on completion and whatever it contains inbetween is
> upto the low level driver. Request position or length are different
> as they must contain well defined values throughout request processing
> and both block layer and low level driver should agree on what they
> mean.
>
> Fancy words aside, it basically boils down to allowing llds to do
> either "rq->resid_len = blk_rq_bytes() - xferred" on completion or
> "rq->resid_len = blk_rq_bytes()" on issue and "rq->resid_len -=
> increments" while processing.
Actually, the second one sounds more natural: resid_len == data_len on
issue and decrementing while travelling through block layer and LLDD,
while resid_len == 0 in issue might get confused somewhere.
And I like it too, we've been coming up with all sorts of hacks in
ide-atapi wrt to residual completion and accounting of what got xferred
already and rq->resid_len is much more cleaner, IMHO.
/me testing...
--
Regards/Gruss,
Boris.
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 03/10] block: add rq->resid_len
2009-04-30 6:45 ` Borislav Petkov
@ 2009-04-30 7:19 ` Tejun Heo
2009-04-30 7:19 ` Tejun Heo
1 sibling, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-30 7:19 UTC (permalink / raw)
To: petkovbb, Tejun Heo, James Bottomley, axboe, linux-kernel, jeff,
linux-ide
Borislav Petkov wrote:
>> Fancy words aside, it basically boils down to allowing llds to do
>> either "rq->resid_len = blk_rq_bytes() - xferred" on completion or
>> "rq->resid_len = blk_rq_bytes()" on issue and "rq->resid_len -=
>> increments" while processing.
>
> Actually, the second one sounds more natural: resid_len == data_len on
> issue and decrementing while travelling through block layer and LLDD,
> while resid_len == 0 in issue might get confused somewhere.
Yeap, it depends on how the specific low level driver is doing it.
> And I like it too, we've been coming up with all sorts of hacks in
> ide-atapi wrt to residual completion and accounting of what got xferred
> already and rq->resid_len is much more cleaner, IMHO.
>
> /me testing...
AFAICT, residual count handling in ide was most broken. This patch
doesn't fix anything other than making it report 0 resid_len on SG_IO
which is usually better than reporting full residual count. The only
place inside ide where residual count is used in the tape driver to
determine actually transferred size. That part works okay with the
patch applied.
Hmmm... maybe it's about time to finally clean up residual count
handling in ide and libata, which BTW doesn't do anything about it at
the moment.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 03/10] block: add rq->resid_len
@ 2009-04-30 7:19 ` Tejun Heo
0 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-30 7:19 UTC (permalink / raw)
To: petkovbb, Tejun Heo, James Bottomley, axboe, linux-kernel, jeff,
linux-ide, linux-scsi, bzolnier, petkovbb, sshtylyov,
mike.miller, chirag.kantharia, Eric.Moore, stern,
fujita.tomonori, zaitcev, Geert.Uytterhoeven, sfr, grant.likely,
paul.clements, jesper.juhl, tim, jeremy, adrian, oakad, dwmw2,
schwidefsky, ballabio_dario, davem, rusty, Markus.Lidel,
bharrosh, Doug Gilbert, Darrick J. Wong
Borislav Petkov wrote:
>> Fancy words aside, it basically boils down to allowing llds to do
>> either "rq->resid_len = blk_rq_bytes() - xferred" on completion or
>> "rq->resid_len = blk_rq_bytes()" on issue and "rq->resid_len -=
>> increments" while processing.
>
> Actually, the second one sounds more natural: resid_len == data_len on
> issue and decrementing while travelling through block layer and LLDD,
> while resid_len == 0 in issue might get confused somewhere.
Yeap, it depends on how the specific low level driver is doing it.
> And I like it too, we've been coming up with all sorts of hacks in
> ide-atapi wrt to residual completion and accounting of what got xferred
> already and rq->resid_len is much more cleaner, IMHO.
>
> /me testing...
AFAICT, residual count handling in ide was most broken. This patch
doesn't fix anything other than making it report 0 resid_len on SG_IO
which is usually better than reporting full residual count. The only
place inside ide where residual count is used in the tape driver to
determine actually transferred size. That part works okay with the
patch applied.
Hmmm... maybe it's about time to finally clean up residual count
handling in ide and libata, which BTW doesn't do anything about it at
the moment.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 03/10] block: add rq->resid_len
2009-04-30 6:45 ` Borislav Petkov
@ 2009-04-30 7:19 ` Tejun Heo
2009-04-30 7:19 ` Tejun Heo
1 sibling, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-30 7:19 UTC (permalink / raw)
To: petkovbb, Tejun Heo, James Bottomley, axboe, linux-kernel, jeff,
linux-ide
Borislav Petkov wrote:
>> Fancy words aside, it basically boils down to allowing llds to do
>> either "rq->resid_len = blk_rq_bytes() - xferred" on completion or
>> "rq->resid_len = blk_rq_bytes()" on issue and "rq->resid_len -=
>> increments" while processing.
>
> Actually, the second one sounds more natural: resid_len == data_len on
> issue and decrementing while travelling through block layer and LLDD,
> while resid_len == 0 in issue might get confused somewhere.
Yeap, it depends on how the specific low level driver is doing it.
> And I like it too, we've been coming up with all sorts of hacks in
> ide-atapi wrt to residual completion and accounting of what got xferred
> already and rq->resid_len is much more cleaner, IMHO.
>
> /me testing...
AFAICT, residual count handling in ide was most broken. This patch
doesn't fix anything other than making it report 0 resid_len on SG_IO
which is usually better than reporting full residual count. The only
place inside ide where residual count is used in the tape driver to
determine actually transferred size. That part works okay with the
patch applied.
Hmmm... maybe it's about time to finally clean up residual count
handling in ide and libata, which BTW doesn't do anything about it at
the moment.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 03/10] block: add rq->resid_len
2009-04-30 7:19 ` Tejun Heo
(?)
@ 2009-04-30 7:37 ` Borislav Petkov
2009-04-30 9:25 ` Tejun Heo
2009-04-30 9:25 ` Tejun Heo
-1 siblings, 2 replies; 56+ messages in thread
From: Borislav Petkov @ 2009-04-30 7:37 UTC (permalink / raw)
To: Tejun Heo
Cc: James Bottomley, axboe, linux-kernel, jeff, linux-ide,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, grant.likely, paul.clements,
jesper.juhl, tim, jeremy, adrian, oakad, dwmw2, schwidefsky,
ballabio_dario, davem, rusty, Markus.Lidel, bharrosh,
Doug Gilbert, Darrick J. Wong
On Thu, Apr 30, 2009 at 04:19:29PM +0900, Tejun Heo wrote:
> Borislav Petkov wrote:
> >> Fancy words aside, it basically boils down to allowing llds to do
> >> either "rq->resid_len = blk_rq_bytes() - xferred" on completion or
> >> "rq->resid_len = blk_rq_bytes()" on issue and "rq->resid_len -=
> >> increments" while processing.
> >
> > Actually, the second one sounds more natural: resid_len == data_len on
> > issue and decrementing while travelling through block layer and LLDD,
> > while resid_len == 0 in issue might get confused somewhere.
>
> Yeap, it depends on how the specific low level driver is doing it.
>
> > And I like it too, we've been coming up with all sorts of hacks in
> > ide-atapi wrt to residual completion and accounting of what got xferred
> > already and rq->resid_len is much more cleaner, IMHO.
> >
> > /me testing...
>
> AFAICT, residual count handling in ide was most broken.
Tell me about it :).
> This patch doesn't fix anything other than making it report 0
> resid_len on SG_IO which is usually better than reporting full
> residual count. The only place inside ide where residual count is used
> in the tape driver to determine actually transferred size. That part
> works okay with the patch applied.
> Hmmm... maybe it's about time to finally clean up residual count
> handling in ide and libata, which BTW doesn't do anything about it at
> the moment.
Completely agreed. This doesn't do anything about it right now but
with rq->resid_len in place I could get rid of a bunch of pc->xferred,
cmd->nleft and similar on-stack structs we've been introducing, and use
solely an rq in the LLD. I'll get to do some experimenting tomorrow and
whip up some cleanup patches in order to see how it could look exactly.
Stay tuned.
Thanks.
--
Regards/Gruss,
Boris.
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 03/10] block: add rq->resid_len
2009-04-30 7:37 ` Borislav Petkov
2009-04-30 9:25 ` Tejun Heo
@ 2009-04-30 9:25 ` Tejun Heo
1 sibling, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-30 9:25 UTC (permalink / raw)
To: petkovbb, Tejun Heo, James Bottomley, axboe, linux-kernel, jeff,
linux-ide
Borislav Petkov wrote:
>>> And I like it too, we've been coming up with all sorts of hacks in
>>> ide-atapi wrt to residual completion and accounting of what got xferred
>>> already and rq->resid_len is much more cleaner, IMHO.
>>>
>>> /me testing...
>> AFAICT, residual count handling in ide was most broken.
Oooh... It was "mostly broken" not "most broken". Where went my l and
y?
> Tell me about it :).
>
>> This patch doesn't fix anything other than making it report 0
>> resid_len on SG_IO which is usually better than reporting full
>> residual count. The only place inside ide where residual count is used
>> in the tape driver to determine actually transferred size. That part
>> works okay with the patch applied.
>
>> Hmmm... maybe it's about time to finally clean up residual count
>> handling in ide and libata, which BTW doesn't do anything about it at
>> the moment.
>
> Completely agreed. This doesn't do anything about it right now but
> with rq->resid_len in place I could get rid of a bunch of pc->xferred,
> cmd->nleft and similar on-stack structs we've been introducing, and use
> solely an rq in the LLD. I'll get to do some experimenting tomorrow and
> whip up some cleanup patches in order to see how it could look exactly.
> Stay tuned.
Yay, cool. :-)
--
tejun
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 03/10] block: add rq->resid_len
2009-04-30 7:37 ` Borislav Petkov
@ 2009-04-30 9:25 ` Tejun Heo
2009-04-30 9:25 ` Tejun Heo
1 sibling, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-30 9:25 UTC (permalink / raw)
To: petkovbb, Tejun Heo, James Bottomley, axboe, linux-kernel, jeff,
linux-ide, linux-scsi, bzolnier, petkovbb, sshtylyov,
mike.miller, chirag.kantharia, Eric.Moore, stern,
fujita.tomonori, zaitcev, Geert.Uytterhoeven, sfr, grant.likely,
paul.clements, jesper.juhl, tim, jeremy, adrian, oakad, dwmw2,
schwidefsky, ballabio_dario, davem, rusty, Markus.Lidel,
bharrosh, Doug Gilbert, Darrick J. Wong
Borislav Petkov wrote:
>>> And I like it too, we've been coming up with all sorts of hacks in
>>> ide-atapi wrt to residual completion and accounting of what got xferred
>>> already and rq->resid_len is much more cleaner, IMHO.
>>>
>>> /me testing...
>> AFAICT, residual count handling in ide was most broken.
Oooh... It was "mostly broken" not "most broken". Where went my l and
y?
> Tell me about it :).
>
>> This patch doesn't fix anything other than making it report 0
>> resid_len on SG_IO which is usually better than reporting full
>> residual count. The only place inside ide where residual count is used
>> in the tape driver to determine actually transferred size. That part
>> works okay with the patch applied.
>
>> Hmmm... maybe it's about time to finally clean up residual count
>> handling in ide and libata, which BTW doesn't do anything about it at
>> the moment.
>
> Completely agreed. This doesn't do anything about it right now but
> with rq->resid_len in place I could get rid of a bunch of pc->xferred,
> cmd->nleft and similar on-stack structs we've been introducing, and use
> solely an rq in the LLD. I'll get to do some experimenting tomorrow and
> whip up some cleanup patches in order to see how it could look exactly.
> Stay tuned.
Yay, cool. :-)
--
tejun
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 03/10] block: add rq->resid_len
@ 2009-04-30 9:25 ` Tejun Heo
0 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-04-30 9:25 UTC (permalink / raw)
To: petkovbb, Tejun Heo, James Bottomley, axboe, linux-kernel, jeff,
linux-ide
Borislav Petkov wrote:
>>> And I like it too, we've been coming up with all sorts of hacks in
>>> ide-atapi wrt to residual completion and accounting of what got xferred
>>> already and rq->resid_len is much more cleaner, IMHO.
>>>
>>> /me testing...
>> AFAICT, residual count handling in ide was most broken.
Oooh... It was "mostly broken" not "most broken". Where went my l and
y?
> Tell me about it :).
>
>> This patch doesn't fix anything other than making it report 0
>> resid_len on SG_IO which is usually better than reporting full
>> residual count. The only place inside ide where residual count is used
>> in the tape driver to determine actually transferred size. That part
>> works okay with the patch applied.
>
>> Hmmm... maybe it's about time to finally clean up residual count
>> handling in ide and libata, which BTW doesn't do anything about it at
>> the moment.
>
> Completely agreed. This doesn't do anything about it right now but
> with rq->resid_len in place I could get rid of a bunch of pc->xferred,
> cmd->nleft and similar on-stack structs we've been introducing, and use
> solely an rq in the LLD. I'll get to do some experimenting tomorrow and
> whip up some cleanup patches in order to see how it could look exactly.
> Stay tuned.
Yay, cool. :-)
--
tejun
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 07/10] block: drop request->hard_* and *nr_sectors
2009-04-29 9:13 ` Tejun Heo
(?)
@ 2009-04-30 13:46 ` Boaz Harrosh
2009-05-04 5:06 ` Tejun Heo
-1 siblings, 1 reply; 56+ messages in thread
From: Boaz Harrosh @ 2009-04-30 13:46 UTC (permalink / raw)
To: Tejun Heo
Cc: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, grant.likely, paul.clements,
jesper.juhl, tim, jeremy, adrian, oakad, dwmw2, schwidefsky,
ballabio_dario, davem, rusty, Markus.Lidel
On 04/29/2009 12:13 PM, Tejun Heo wrote:
> struct request has had a few different ways to represent some
> properties of a request. ->hard_* represent block layer's view of the
> request progress (completion cursor) and the ones without the prefix
> are supposed to represent the issue cursor and allowed to be updated
> as necessary by the low level drivers. The thing is that as block
> layer supports partial completion, the two cursors really aren't
> necessary and only cause confusion. In addition, manual management of
> request detail from low level drivers is cumbersome and error-prone at
> the very least.
>
> Another interesting duplicate fields are rq->[hard_]nr_sectors and
> rq->{hard_cur|current}_nr_sectors against rq->data_len and
> rq->bio->bi_size. This is more convoluted than the hard_ case.
>
> rq->[hard_]nr_sectors are initialized for requests with bio but
> blk_rq_bytes() uses it only for !pc requests. rq->data_len is
> initialized for all request but blk_rq_bytes() uses it only for pc
> requests. This causes good amount of confusion throughout block layer
> and its drivers and determining the request length has been a bit of
> black magic which may or may not work depending on circumstances and
> what the specific LLD is actually doing.
>
> rq->{hard_cur|current}_nr_sectors represent the number of sectors in
> the contiguous data area at the front. This is mainly used by drivers
> which transfers data by walking request segment-by-segment. This
> value always equals rq->bio->bi_size >> 9. However, data length for
> pc requests may not be multiple of 512 bytes and using this field
> becomes a bit confusing.
>
> In general, having multiple fields to represent the same property
> leads only to confusion and subtle bugs. With recent block low level
> driver cleanups, no driver is accessing or manipulating these
> duplicate fields directly. Drop all the duplicates. Now rq->sector
> means the current sector, rq->data_len the current total length and
> rq->bio->bi_size the current segment length. Everything else is
> defined in terms of these three and available only through accessors.
>
> * blk_recalc_rq_sectors() is collapsed into blk_update_request() and
> now handles pc and fs requests equally other than rq->sector update.
> This means that now pc requests can use partial completion too (no
> in-kernel user yet tho).
>
> * bio_cur_sectors() is replaced with bio_cur_bytes() as block layer
> now uses byte count as the primary data length.
>
> * blk_rq_pos() is now guranteed to be always correct. In-block users
> converted.
>
> * blk_rq_bytes() is now guaranteed to be always valid as is
> blk_rq_sectors(). In-block users converted.
>
> * blk_rq_sectors() is now guaranteed to equal blk_rq_bytes() >> 9.
> More convenient one is used.
>
> [ Impact: API cleanup, single way to represent one property of a request ]
>
> Signed-off-by: Tejun Heo <tj@kernel.org>
> Cc: Boaz Harrosh <bharrosh@panasas.com>
> ---
> block/blk-core.c | 81 +++++++++++++++++-----------------------------
> block/blk-merge.c | 36 ++------------------
> block/blk.h | 1 -
> block/cfq-iosched.c | 10 +++---
> include/linux/bio.h | 6 ++--
> include/linux/blkdev.h | 37 +++++++++------------
> include/linux/elevator.h | 2 +-
> kernel/trace/blktrace.c | 16 ++++----
> 8 files changed, 67 insertions(+), 122 deletions(-)
>
> diff --git a/block/blk-core.c b/block/blk-core.c
> index 82dc206..3596ca7 100644
> --- a/block/blk-core.c
> +++ b/block/blk-core.c
> @@ -127,7 +127,7 @@ void blk_rq_init(struct request_queue *q, struct request *rq)
> INIT_LIST_HEAD(&rq->timeout_list);
> rq->cpu = -1;
> rq->q = q;
> - rq->sector = rq->hard_sector = (sector_t) -1;
> + rq->sector = (sector_t) -1;
> INIT_HLIST_NODE(&rq->hash);
> RB_CLEAR_NODE(&rq->rb_node);
> rq->cmd = rq->__cmd;
> @@ -189,8 +189,7 @@ void blk_dump_rq_flags(struct request *rq, char *msg)
> (unsigned long long)blk_rq_pos(rq),
> blk_rq_sectors(rq), blk_rq_cur_sectors(rq));
> printk(KERN_INFO " bio %p, biotail %p, buffer %p, len %u\n",
> - rq->bio, rq->biotail,
> - rq->buffer, rq->data_len);
> + rq->bio, rq->biotail, rq->buffer, blk_rq_bytes(rq));
>
> if (blk_pc_request(rq)) {
> printk(KERN_INFO " cdb: ");
> @@ -1096,7 +1095,7 @@ void init_request_from_bio(struct request *req, struct bio *bio)
> req->cmd_flags |= REQ_NOIDLE;
>
> req->errors = 0;
> - req->hard_sector = req->sector = bio->bi_sector;
> + req->sector = bio->bi_sector;
> req->ioprio = bio_prio(bio);
> blk_rq_bio_prep(req->q, req, bio);
> }
> @@ -1113,14 +1112,13 @@ static inline bool queue_should_plug(struct request_queue *q)
> static int __make_request(struct request_queue *q, struct bio *bio)
> {
> struct request *req;
> - int el_ret, nr_sectors;
> + int el_ret;
> + unsigned int bytes = bio->bi_size;
> const unsigned short prio = bio_prio(bio);
> const int sync = bio_sync(bio);
> const int unplug = bio_unplug(bio);
> int rw_flags;
>
> - nr_sectors = bio_sectors(bio);
> -
> /*
> * low level driver can indicate that it wants pages above a
> * certain limit bounced to low memory (ie for highmem, or even
> @@ -1145,7 +1143,7 @@ static int __make_request(struct request_queue *q, struct bio *bio)
>
> req->biotail->bi_next = bio;
> req->biotail = bio;
> - req->nr_sectors = req->hard_nr_sectors += nr_sectors;
> + req->data_len += bytes;
> req->ioprio = ioprio_best(req->ioprio, prio);
> if (!blk_rq_cpu_valid(req))
> req->cpu = bio->bi_comp_cpu;
> @@ -1171,10 +1169,8 @@ static int __make_request(struct request_queue *q, struct bio *bio)
> * not touch req->buffer either...
> */
> req->buffer = bio_data(bio);
> - req->current_nr_sectors = bio_cur_sectors(bio);
> - req->hard_cur_sectors = req->current_nr_sectors;
> - req->sector = req->hard_sector = bio->bi_sector;
> - req->nr_sectors = req->hard_nr_sectors += nr_sectors;
> + req->sector = bio->bi_sector;
> + req->data_len += bytes;
> req->ioprio = ioprio_best(req->ioprio, prio);
> if (!blk_rq_cpu_valid(req))
> req->cpu = bio->bi_comp_cpu;
> @@ -1557,7 +1553,7 @@ EXPORT_SYMBOL(submit_bio);
> int blk_rq_check_limits(struct request_queue *q, struct request *rq)
> {
> if (blk_rq_sectors(rq) > q->max_sectors ||
> - rq->data_len > q->max_hw_sectors << 9) {
> + blk_rq_bytes(rq) > q->max_hw_sectors << 9) {
> printk(KERN_ERR "%s: over max size limit.\n", __func__);
> return -EIO;
> }
> @@ -1675,35 +1671,6 @@ static void blk_account_io_done(struct request *req)
> }
> }
>
> -/**
> - * blk_rq_bytes - Returns bytes left to complete in the entire request
> - * @rq: the request being processed
> - **/
> -unsigned int blk_rq_bytes(struct request *rq)
> -{
> - if (blk_fs_request(rq))
> - return blk_rq_sectors(rq) << 9;
> -
> - return rq->data_len;
> -}
> -EXPORT_SYMBOL_GPL(blk_rq_bytes);
> -
> -/**
> - * blk_rq_cur_bytes - Returns bytes left to complete in the current segment
> - * @rq: the request being processed
> - **/
> -unsigned int blk_rq_cur_bytes(struct request *rq)
> -{
> - if (blk_fs_request(rq))
> - return rq->current_nr_sectors << 9;
> -
> - if (rq->bio)
> - return rq->bio->bi_size;
> -
> - return rq->data_len;
> -}
> -EXPORT_SYMBOL_GPL(blk_rq_cur_bytes);
> -
> struct request *elv_next_request(struct request_queue *q)
> {
> struct request *rq;
> @@ -1736,7 +1703,7 @@ struct request *elv_next_request(struct request_queue *q)
> if (rq->cmd_flags & REQ_DONTPREP)
> break;
>
> - if (q->dma_drain_size && rq->data_len) {
> + if (q->dma_drain_size && blk_rq_bytes(rq)) {
> /*
> * make sure space for the drain appears we
> * know we can do this because max_hw_segments
> @@ -1759,7 +1726,7 @@ struct request *elv_next_request(struct request_queue *q)
> * avoid resource deadlock. REQ_STARTED will
> * prevent other fs requests from passing this one.
> */
> - if (q->dma_drain_size && rq->data_len &&
> + if (q->dma_drain_size && blk_rq_bytes(rq) &&
> !(rq->cmd_flags & REQ_DONTPREP)) {
> /*
> * remove the space for the drain we added
> @@ -1911,8 +1878,7 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
> * can find how many bytes remain in the request
> * later.
> */
> - req->nr_sectors = req->hard_nr_sectors = 0;
> - req->current_nr_sectors = req->hard_cur_sectors = 0;
> + req->data_len = 0;
> return false;
> }
>
> @@ -1926,8 +1892,25 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
> bio_iovec(bio)->bv_len -= nr_bytes;
> }
>
> - blk_recalc_rq_sectors(req, total_bytes >> 9);
> + req->data_len -= total_bytes;
> + req->buffer = bio_data(req->bio);
> +
> + /* update sector only for requests with clear definition of sector */
> + if (blk_fs_request(req) || blk_discard_rq(req))
> + req->sector += total_bytes >> 9;
> +
> + /*
> + * If total number of sectors is less than the first segment
> + * size, something has gone terribly wrong.
> + */
> + if (blk_rq_bytes(req) < blk_rq_cur_bytes(req)) {
> + printk(KERN_ERR "blk: request botched\n");
> + req->data_len = blk_rq_cur_bytes(req);
> + }
What happens in the last bio/segment? Is it not allowed with block_pc commands
that blk_rq_bytes(req) (was data_len) be smaller then sum_bytes(bio-chain)?
Also I never understood the drain is it not appended to the last bio? I thought it
is costumery in the Kernel to allow mapping longer then actual length?
Maybe you would want blk_rq_cur_bytes(req) to return the minimum of the two, and let
bio's be longer then bytes requested. (ie. reverse above logic)
> +
> + /* recalculate the number of segments */
> blk_recalc_rq_segments(req);
> +
> return true;
> }
> EXPORT_SYMBOL_GPL(blk_update_request);
> @@ -2049,11 +2032,7 @@ void blk_rq_bio_prep(struct request_queue *q, struct request *rq,
> rq->nr_phys_segments = bio_phys_segments(q, bio);
> rq->buffer = bio_data(bio);
> }
> - rq->current_nr_sectors = bio_cur_sectors(bio);
> - rq->hard_cur_sectors = rq->current_nr_sectors;
> - rq->hard_nr_sectors = rq->nr_sectors = bio_sectors(bio);
> rq->data_len = bio->bi_size;
> -
> rq->bio = rq->biotail = bio;
>
> if (bio->bi_bdev)
> diff --git a/block/blk-merge.c b/block/blk-merge.c
> index bf62a87..b8df66a 100644
> --- a/block/blk-merge.c
> +++ b/block/blk-merge.c
> @@ -9,35 +9,6 @@
>
> #include "blk.h"
>
> -void blk_recalc_rq_sectors(struct request *rq, int nsect)
> -{
> - if (blk_fs_request(rq) || blk_discard_rq(rq)) {
> - rq->hard_sector += nsect;
> - rq->hard_nr_sectors -= nsect;
> -
> - /*
> - * Move the I/O submission pointers ahead if required.
> - */
> - if ((rq->nr_sectors >= rq->hard_nr_sectors) &&
> - (rq->sector <= rq->hard_sector)) {
> - rq->sector = rq->hard_sector;
> - rq->nr_sectors = rq->hard_nr_sectors;
> - rq->hard_cur_sectors = bio_cur_sectors(rq->bio);
> - rq->current_nr_sectors = rq->hard_cur_sectors;
> - rq->buffer = bio_data(rq->bio);
> - }
> -
> - /*
> - * if total number of sectors is less than the first segment
> - * size, something has gone terribly wrong
> - */
> - if (rq->nr_sectors < rq->current_nr_sectors) {
> - printk(KERN_ERR "blk: request botched\n");
> - rq->nr_sectors = rq->current_nr_sectors;
> - }
> - }
> -}
> -
> static unsigned int __blk_recalc_rq_segments(struct request_queue *q,
> struct bio *bio)
> {
> @@ -199,8 +170,9 @@ new_segment:
>
>
> if (unlikely(rq->cmd_flags & REQ_COPY_USER) &&
> - (rq->data_len & q->dma_pad_mask)) {
> - unsigned int pad_len = (q->dma_pad_mask & ~rq->data_len) + 1;
> + (blk_rq_bytes(rq) & q->dma_pad_mask)) {
> + unsigned int pad_len =
> + (q->dma_pad_mask & ~blk_rq_bytes(rq)) + 1;
>
> sg->length += pad_len;
> rq->extra_len += pad_len;
> @@ -398,7 +370,7 @@ static int attempt_merge(struct request_queue *q, struct request *req,
> req->biotail->bi_next = next->bio;
> req->biotail = next->biotail;
>
> - req->nr_sectors = req->hard_nr_sectors += next->hard_nr_sectors;
> + req->data_len += blk_rq_bytes(next);
>
> elv_merge_requests(q, req, next);
>
> diff --git a/block/blk.h b/block/blk.h
> index 5111559..ab54529 100644
> --- a/block/blk.h
> +++ b/block/blk.h
> @@ -101,7 +101,6 @@ int ll_front_merge_fn(struct request_queue *q, struct request *req,
> int attempt_back_merge(struct request_queue *q, struct request *rq);
> int attempt_front_merge(struct request_queue *q, struct request *rq);
> void blk_recalc_rq_segments(struct request *rq);
> -void blk_recalc_rq_sectors(struct request *rq, int nsect);
>
> void blk_queue_congestion_threshold(struct request_queue *q);
>
> diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
> index db4d990..99ac430 100644
> --- a/block/cfq-iosched.c
> +++ b/block/cfq-iosched.c
> @@ -579,9 +579,9 @@ cfq_prio_tree_lookup(struct cfq_data *cfqd, struct rb_root *root,
> * Sort strictly based on sector. Smallest to the left,
> * largest to the right.
> */
> - if (sector > cfqq->next_rq->sector)
> + if (sector > blk_rq_pos(cfqq->next_rq))
> n = &(*p)->rb_right;
> - else if (sector < cfqq->next_rq->sector)
> + else if (sector < blk_rq_pos(cfqq->next_rq))
> n = &(*p)->rb_left;
> else
> break;
> @@ -611,8 +611,8 @@ static void cfq_prio_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq)
> return;
>
> cfqq->p_root = &cfqd->prio_trees[cfqq->org_ioprio];
> - __cfqq = cfq_prio_tree_lookup(cfqd, cfqq->p_root, cfqq->next_rq->sector,
> - &parent, &p);
> + __cfqq = cfq_prio_tree_lookup(cfqd, cfqq->p_root,
> + blk_rq_pos(cfqq->next_rq), &parent, &p);
> if (!__cfqq) {
> rb_link_node(&cfqq->p_node, parent, p);
> rb_insert_color(&cfqq->p_node, cfqq->p_root);
> @@ -996,7 +996,7 @@ static struct cfq_queue *cfqq_close(struct cfq_data *cfqd,
> if (cfq_rq_close(cfqd, __cfqq->next_rq))
> return __cfqq;
>
> - if (__cfqq->next_rq->sector < sector)
> + if (blk_rq_pos(__cfqq->next_rq) < sector)
> node = rb_next(&__cfqq->p_node);
> else
> node = rb_prev(&__cfqq->p_node);
> diff --git a/include/linux/bio.h b/include/linux/bio.h
> index f37ca8c..d30ec6f 100644
> --- a/include/linux/bio.h
> +++ b/include/linux/bio.h
> @@ -218,12 +218,12 @@ struct bio {
> #define bio_sectors(bio) ((bio)->bi_size >> 9)
> #define bio_empty_barrier(bio) (bio_barrier(bio) && !bio_has_data(bio) && !bio_discard(bio))
>
> -static inline unsigned int bio_cur_sectors(struct bio *bio)
> +static inline unsigned int bio_cur_bytes(struct bio *bio)
> {
> if (bio->bi_vcnt)
> - return bio_iovec(bio)->bv_len >> 9;
> + return bio_iovec(bio)->bv_len;
> else /* dataless requests such as discard */
> - return bio->bi_size >> 9;
> + return bio->bi_size;
> }
>
> static inline void *bio_data(struct bio *bio)
> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
> index 1e18ef7..943cbfe 100644
> --- a/include/linux/blkdev.h
> +++ b/include/linux/blkdev.h
> @@ -166,19 +166,8 @@ struct request {
> enum rq_cmd_type_bits cmd_type;
> unsigned long atomic_flags;
>
> - /* Maintain bio traversal state for part by part I/O submission.
> - * hard_* are block layer internals, no driver should touch them!
> - */
> -
> - sector_t sector; /* next sector to submit */
> - sector_t hard_sector; /* next sector to complete */
> - unsigned long nr_sectors; /* no. of sectors left to submit */
> - unsigned long hard_nr_sectors; /* no. of sectors left to complete */
> - /* no. of sectors left to submit in the current segment */
> - unsigned int current_nr_sectors;
> -
> - /* no. of sectors left to complete in the current segment */
> - unsigned int hard_cur_sectors;
> + sector_t sector; /* sector cursor */
> + unsigned int data_len; /* total data len, don't access directly */
>
> struct bio *bio;
> struct bio *biotail;
> @@ -226,7 +215,6 @@ struct request {
> unsigned char __cmd[BLK_MAX_CDB];
> unsigned char *cmd;
>
> - unsigned int data_len;
> unsigned int extra_len; /* length of alignment and padding */
> unsigned int sense_len;
> unsigned int resid_len; /* residual count */
> @@ -840,20 +828,27 @@ extern void blkdev_dequeue_request(struct request *req);
> */
> static inline sector_t blk_rq_pos(struct request *rq)
> {
> - return rq->hard_sector;
> + return rq->sector;
> +}
> +
> +static inline unsigned int blk_rq_bytes(struct request *rq)
> +{
> + return rq->data_len;
> }
>
> -extern unsigned int blk_rq_bytes(struct request *rq);
> -extern unsigned int blk_rq_cur_bytes(struct request *rq);
> +static inline int blk_rq_cur_bytes(struct request *rq)
> +{
> + return rq->bio ? bio_cur_bytes(rq->bio) : 0;
> +}
>
> static inline unsigned int blk_rq_sectors(struct request *rq)
> {
> - return rq->hard_nr_sectors;
> + return blk_rq_bytes(rq) >> 9;
> }
>
> static inline unsigned int blk_rq_cur_sectors(struct request *rq)
> {
> - return rq->hard_cur_sectors;
> + return blk_rq_cur_bytes(rq) >> 9;
> }
>
> /*
> @@ -928,7 +923,7 @@ static inline void blk_end_request_all(struct request *rq, int error)
> */
> static inline bool blk_end_request_cur(struct request *rq, int error)
> {
> - return blk_end_request(rq, error, rq->hard_cur_sectors << 9);
> + return blk_end_request(rq, error, blk_rq_cur_bytes(rq));
> }
>
> /**
> @@ -981,7 +976,7 @@ static inline void __blk_end_request_all(struct request *rq, int error)
> */
> static inline bool __blk_end_request_cur(struct request *rq, int error)
> {
> - return __blk_end_request(rq, error, rq->hard_cur_sectors << 9);
> + return __blk_end_request(rq, error, blk_rq_cur_bytes(rq));
> }
>
> extern void blk_complete_request(struct request *);
> diff --git a/include/linux/elevator.h b/include/linux/elevator.h
> index c59b769..4e46287 100644
> --- a/include/linux/elevator.h
> +++ b/include/linux/elevator.h
> @@ -171,7 +171,7 @@ enum {
> ELV_MQUEUE_MUST,
> };
>
> -#define rq_end_sector(rq) ((rq)->sector + (rq)->nr_sectors)
> +#define rq_end_sector(rq) (blk_rq_pos(rq) + blk_rq_sectors(rq))
> #define rb_entry_rq(node) rb_entry((node), struct request, rb_node)
>
> /*
> diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
> index 42f1c11..5708a14 100644
> --- a/kernel/trace/blktrace.c
> +++ b/kernel/trace/blktrace.c
> @@ -642,12 +642,12 @@ static void blk_add_trace_rq(struct request_queue *q, struct request *rq,
>
> if (blk_pc_request(rq)) {
> what |= BLK_TC_ACT(BLK_TC_PC);
> - __blk_add_trace(bt, 0, rq->data_len, rw, what, rq->errors,
> - rq->cmd_len, rq->cmd);
> + __blk_add_trace(bt, 0, blk_rq_bytes(rq), rw,
> + what, rq->errors, rq->cmd_len, rq->cmd);
> } else {
> what |= BLK_TC_ACT(BLK_TC_FS);
> - __blk_add_trace(bt, blk_rq_pos(rq), blk_rq_sectors(rq) << 9,
> - rw, what, rq->errors, 0, NULL);
> + __blk_add_trace(bt, blk_rq_pos(rq), blk_rq_bytes(rq), rw,
> + what, rq->errors, 0, NULL);
> }
> }
>
> @@ -854,11 +854,11 @@ void blk_add_driver_data(struct request_queue *q,
> return;
>
> if (blk_pc_request(rq))
> - __blk_add_trace(bt, 0, rq->data_len, 0, BLK_TA_DRV_DATA,
> - rq->errors, len, data);
> + __blk_add_trace(bt, 0, blk_rq_bytes(rq), 0,
> + BLK_TA_DRV_DATA, rq->errors, len, data);
> else
> - __blk_add_trace(bt, blk_rq_pos(rq), blk_rq_sectors(rq) << 9,
> - 0, BLK_TA_DRV_DATA, rq->errors, len, data);
> + __blk_add_trace(bt, blk_rq_pos(rq), blk_rq_bytes(rq), 0,
> + BLK_TA_DRV_DATA, rq->errors, len, data);
> }
> EXPORT_SYMBOL_GPL(blk_add_driver_data);
>
Thanks, very^3 nice stuff
Boaz
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 08/10] block: cleanup rq->data_len usages
2009-04-29 9:13 ` Tejun Heo
(?)
@ 2009-04-30 13:47 ` Boaz Harrosh
2009-04-30 15:35 ` James Bottomley
2009-05-03 1:36 ` Tejun Heo
-1 siblings, 2 replies; 56+ messages in thread
From: Boaz Harrosh @ 2009-04-30 13:47 UTC (permalink / raw)
To: Tejun Heo
Cc: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, grant.likely, paul.clements,
jesper.juhl, tim, jeremy, adrian, oakad, dwmw2, schwidefsky,
ballabio_dario, davem, rusty, Markus.Lidel, Darrick J. Wong
On 04/29/2009 12:13 PM, Tejun Heo wrote:
> With recent unification of fields, it's now guaranteed that
> rq->data_len always equals blk_rq_bytes(). Convert all non-IDE direct
> users to accessors. IDE will be converted in a separate patch.
>
> [ Impact: convert direct rq->data_len usages to blk_rq_bytes() ]
>
> Signed-off-by: Tejun Heo <tj@kernel.org>
> Cc: Pete Zaitcev <zaitcev@redhat.com>
> Cc: Eric Moore <Eric.Moore@lsi.com>
> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
> Cc: Darrick J. Wong <djwong@us.ibm.com>
> Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
> Cc: Eric Moore <Eric.Moore@lsi.com>
> Cc: Boaz Harrosh <bharrosh@panasas.com>
> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
> ---
<snip>
> drivers/scsi/osd/osd_initiator.c | 4 ++--
> fs/exofs/osd.c | 4 ++--
<snip>
> diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
> index 2a5f077..d178a8b 100644
> --- a/drivers/scsi/osd/osd_initiator.c
> +++ b/drivers/scsi/osd/osd_initiator.c
> @@ -1299,7 +1299,7 @@ int osd_finalize_request(struct osd_request *or,
> return ret;
> }
> OSD_DEBUG("out bytes=%llu (bytes_req=%u)\n",
> - _LLU(or->out.total_bytes), or->out.req->data_len);
> + _LLU(or->out.total_bytes), blk_rq_bytes(or->out.req));
> }
> if (or->in.bio) {
> ret = blk_rq_append_bio(or->request->q, or->in.req, or->in.bio);
> @@ -1308,7 +1308,7 @@ int osd_finalize_request(struct osd_request *or,
> return ret;
> }
> OSD_DEBUG("in bytes=%llu (bytes_req=%u)\n",
> - _LLU(or->in.total_bytes), or->in.req->data_len);
> + _LLU(or->in.total_bytes), blk_rq_bytes(or->in.req));
> }
>
> or->out.pad_buff = sg_out_pad_buffer;
Sorry about this stupid debug-print. Leftover from the learning days
Ack for this bit.
> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
> index 39b3acf..3d16c70 100644
> --- a/drivers/scsi/scsi_lib.c
> +++ b/drivers/scsi/scsi_lib.c
> @@ -682,14 +682,13 @@ EXPORT_SYMBOL(scsi_release_buffers);
> static void scsi_end_bidi_request(struct scsi_cmnd *cmd)
> {
> struct request *req = cmd->request;
> - unsigned int dlen = req->data_len;
> - unsigned int next_dlen = req->next_rq->data_len;
>
> req->resid_len = scsi_out(cmd)->resid;
> req->next_rq->resid_len = scsi_in(cmd)->resid;
>
> /* The req and req->next_rq have not been completed */
> - BUG_ON(blk_end_bidi_request(req, 0, dlen, next_dlen));
> + BUG_ON(blk_end_bidi_request(req, 0, blk_rq_bytes(req),
> + blk_rq_bytes(req->next_rq)));
>
Just blk_end_request_all() actually. If you let blk_end_request_all also do bidi
> scsi_release_buffers(cmd);
>
and then it can be in-lined into caller, where blk_pc_request(req) just do blk_end_request_all
regardless (and only the residual setting is conditional)
I'll send a patch to scsi_lib later once this settles a bit.
> @@ -966,7 +965,7 @@ static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb,
> BUG_ON(count > sdb->table.nents);
> sdb->table.nents = count;
> if (blk_pc_request(req))
> - sdb->length = req->data_len;
> + sdb->length = blk_rq_bytes(req);
> else
> sdb->length = blk_rq_sectors(req) << 9;
Is this true. I thought they must be the same now. I was actually anticipating this if() removed.
> return BLKPREP_OK;
> @@ -1087,21 +1086,21 @@ int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req)
> if (unlikely(ret))
> return ret;
> } else {
> - BUG_ON(req->data_len);
> + BUG_ON(blk_rq_bytes(req));
>
> memset(&cmd->sdb, 0, sizeof(cmd->sdb));
> req->buffer = NULL;
> }
>
> cmd->cmd_len = req->cmd_len;
> - if (!req->data_len)
> + if (!blk_rq_bytes(req))
> cmd->sc_data_direction = DMA_NONE;
> else if (rq_data_dir(req) == WRITE)
> cmd->sc_data_direction = DMA_TO_DEVICE;
> else
> cmd->sc_data_direction = DMA_FROM_DEVICE;
>
> - cmd->transfersize = req->data_len;
> + cmd->transfersize = blk_rq_bytes(req);
> cmd->allowed = req->retries;
> return BLKPREP_OK;
> }
> diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c
> index 48ba413..1030327 100644
> --- a/drivers/scsi/scsi_tgt_lib.c
> +++ b/drivers/scsi/scsi_tgt_lib.c
> @@ -387,7 +387,7 @@ static int scsi_map_user_pages(struct scsi_tgt_cmd *tcmd, struct scsi_cmnd *cmd,
> * we use REQ_TYPE_BLOCK_PC so scsi_init_io doesn't set the
> * length for us.
> */
> - cmd->sdb.length = rq->data_len;
> + cmd->sdb.length = blk_rq_bytes(rq);
>
> return 0;
>
> diff --git a/fs/exofs/osd.c b/fs/exofs/osd.c
> index b249ae9..c97420b 100644
> --- a/fs/exofs/osd.c
> +++ b/fs/exofs/osd.c
> @@ -50,10 +50,10 @@ int exofs_check_ok_resid(struct osd_request *or, u64 *in_resid, u64 *out_resid)
>
> /* FIXME: should be include in osd_sense_info */
> if (in_resid)
> - *in_resid = or->in.req ? or->in.req->data_len : 0;
> + *in_resid = or->in.req ? blk_rq_bytes(or->in.req) : 0;
+ *in_resid = or->in.req ? or->in.req->resid_len : 0;
>
> if (out_resid)
> - *out_resid = or->out.req ? or->out.req->data_len : 0;
> + *out_resid = or->out.req ? blk_rq_bytes(or->out.req) : 0;
+ *out_resid = or->out.req ? or->out.req->resid_len : 0;
>
> return ret;
> }
OK This segment is wrong. It should be moved to the residual count patch
(PATCH 3/10) the assignment into *in_resid/*out_resid should shourly triggered
a warning ;-)
Thanks
Boaz
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 08/10] block: cleanup rq->data_len usages
2009-04-30 13:47 ` Boaz Harrosh
@ 2009-04-30 15:35 ` James Bottomley
2009-05-01 18:27 ` Jens Axboe
2009-05-03 1:32 ` Tejun Heo
2009-05-03 1:36 ` Tejun Heo
1 sibling, 2 replies; 56+ messages in thread
From: James Bottomley @ 2009-04-30 15:35 UTC (permalink / raw)
To: Boaz Harrosh
Cc: Tejun Heo, axboe, linux-kernel, jeff, linux-ide, linux-scsi,
bzolnier, petkovbb, sshtylyov, mike.miller, chirag.kantharia,
Eric.Moore, stern, fujita.tomonori, zaitcev, Geert.Uytterhoeven,
sfr, grant.likely, paul.clements, jesper.juhl, tim, jeremy,
adrian, oakad, dwmw2, schwidefsky, ballabio_dario, davem, rusty,
Markus.Lidel, Darrick J. Wong
On Thu, 2009-04-30 at 16:47 +0300, Boaz Harrosh wrote:
> > @@ -966,7 +965,7 @@ static int scsi_init_sgtable(struct request
> *req, struct scsi_data_buffer *sdb,
> > BUG_ON(count > sdb->table.nents);
> > sdb->table.nents = count;
> > if (blk_pc_request(req))
> > - sdb->length = req->data_len;
> > + sdb->length = blk_rq_bytes(req);
> > else
> > sdb->length = blk_rq_sectors(req) << 9;
>
> Is this true. I thought they must be the same now. I was actually
> anticipating this if() removed.
Me too ... there's one of these in scsi_lib.c as well.
The difference comes because filesystem requests are always in sectors,
but BLOCK_PC requests are always in bytes .... we should be able to wrap
the accessors so they do the correct conversions.
James
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [GIT PATCH] block,scsi,ide: unify sector and data_len
2009-04-29 9:13 ` Tejun Heo
` (10 preceding siblings ...)
(?)
@ 2009-04-30 16:07 ` Bartlomiej Zolnierkiewicz
-1 siblings, 0 replies; 56+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2009-04-30 16:07 UTC (permalink / raw)
To: Tejun Heo
Cc: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, petkovbb, sshtylyov, mike.miller, chirag.kantharia,
Eric.Moore, stern, fujita.tomonori, zaitcev, Geert.Uytterhoeven,
sfr, grant.likely, paul.clements, jesper.juhl, tim, jeremy,
adrian, oakad, dwmw2, schwidefsky, ballabio_dario, davem, rusty,
Markus.Lidel, bharrosh
On Wednesday 29 April 2009 11:13:38 Tejun Heo wrote:
[...]
> As the patchset contains several block-ide sync points, I think it's
> best to apply this series in unified series. SCSI also received good
> amount of changes. If there's a tree I can pull from which won't be
> rebased, please let me know. If SCSI tree is gonna pull block tree
> after merge, that will be fine too.
>
> All changed llds have been compile tested, mid-high layer resid_len
> handling has been verified and nothing broke during my test runs with
> ide and libata.
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
on drivers/ide parts and block ones (FWIW)
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 05/10] block: convert to pos and nr_sectors accessors
[not found] ` <1241037446.4516.2.camel@localhost.localdomain>
@ 2009-04-30 17:30 ` Adrian McMenamin
0 siblings, 0 replies; 56+ messages in thread
From: Adrian McMenamin @ 2009-04-30 17:30 UTC (permalink / raw)
To: Tejun Heo
Cc: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, grant.likely, paul.clements,
jesper.juhl, tim, jeremy, oakad, dwmw2, schwidefsky,
ballabio_dario, davem, rusty, Markus.Lidel, bharrosh,
Jeff Garzik
On Wed, 2009-04-29 at 21:39 +0100, Adrian McMenamin wrote:
> On Wed, 2009-04-29 at 18:13 +0900, Tejun Heo wrote:
> > With recent cleanups, there is no place where low level driver
> > directly manipulates request fields. This means that the 'hard'
> > request fields always equal the !hard fields. Convert all
> > rq->sectors, nr_sectors and current_nr_sectors references to
> > accessors.
> >
>
> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Apologies, my sendmail was setup badly after a recent mail server crash
so this bounced alot. Hopefully it will reach everybody this time.
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 08/10] block: cleanup rq->data_len usages
2009-04-30 15:35 ` James Bottomley
@ 2009-05-01 18:27 ` Jens Axboe
2009-05-03 1:32 ` Tejun Heo
1 sibling, 0 replies; 56+ messages in thread
From: Jens Axboe @ 2009-05-01 18:27 UTC (permalink / raw)
To: James Bottomley
Cc: Boaz Harrosh, Tejun Heo, linux-kernel, jeff, linux-ide,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, grant.likely, paul.clements,
jesper.juhl, tim, jeremy, adrian, oakad, dwmw2, schwidefsky,
ballabio_dario, davem, rusty, Markus.Lidel, Darrick J. Wong
On Thu, Apr 30 2009, James Bottomley wrote:
> On Thu, 2009-04-30 at 16:47 +0300, Boaz Harrosh wrote:
> > > @@ -966,7 +965,7 @@ static int scsi_init_sgtable(struct request
> > *req, struct scsi_data_buffer *sdb,
> > > BUG_ON(count > sdb->table.nents);
> > > sdb->table.nents = count;
> > > if (blk_pc_request(req))
> > > - sdb->length = req->data_len;
> > > + sdb->length = blk_rq_bytes(req);
> > > else
> > > sdb->length = blk_rq_sectors(req) << 9;
> >
> > Is this true. I thought they must be the same now. I was actually
> > anticipating this if() removed.
>
> Me too ... there's one of these in scsi_lib.c as well.
>
> The difference comes because filesystem requests are always in sectors,
> but BLOCK_PC requests are always in bytes .... we should be able to wrap
> the accessors so they do the correct conversions.
blk_rq_bytes() already takes care of this, it can be used on any type
request. So just kill the if/else.
--
Jens Axboe
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [GIT PATCH] block,scsi,ide: unify sector and data_len
2009-04-29 9:13 ` Tejun Heo
` (11 preceding siblings ...)
(?)
@ 2009-05-01 18:29 ` Jens Axboe
2009-05-03 2:50 ` Tejun Heo
-1 siblings, 1 reply; 56+ messages in thread
From: Jens Axboe @ 2009-05-01 18:29 UTC (permalink / raw)
To: Tejun Heo
Cc: linux-kernel, jeff, linux-ide, James.Bottomley, linux-scsi,
bzolnier, petkovbb, sshtylyov, mike.miller, chirag.kantharia,
Eric.Moore, stern, fujita.tomonori, zaitcev, Geert.Uytterhoeven,
sfr, grant.likely, paul.clements, jesper.juhl, tim, jeremy,
adrian, oakad, dwmw2, schwidefsky, ballabio_dario, davem, rusty,
Markus.Lidel, bharrosh
On Wed, Apr 29 2009, Tejun Heo wrote:
> Hello,
>
> Upon ack, please pull from the following git tree.
>
> git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.git block-unify-sector-and-data_len
Looks sane. When you have collected acks and made suggested changes,
please repost it and I'll integrate it.
Note that I wont be very responsive the next week or so, taking care of
a new aspiring kernel hacker.
--
Jens Axboe
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 08/10] block: cleanup rq->data_len usages
2009-04-30 15:35 ` James Bottomley
2009-05-01 18:27 ` Jens Axboe
@ 2009-05-03 1:32 ` Tejun Heo
2009-05-03 13:51 ` Boaz Harrosh
1 sibling, 1 reply; 56+ messages in thread
From: Tejun Heo @ 2009-05-03 1:32 UTC (permalink / raw)
To: James Bottomley
Cc: Boaz Harrosh, axboe, linux-kernel, jeff, linux-ide, linux-scsi,
bzolnier, petkovbb, sshtylyov, mike.miller, chirag.kantharia,
Eric.Moore, stern, fujita.tomonori, zaitcev, Geert.Uytterhoeven,
sfr, grant.likely, paul.clements, jesper.juhl, tim, jeremy,
adrian, oakad, dwmw2, schwidefsky, ballabio_dario, davem, rusty,
Markus.Lidel, Darrick J. Wong
James Bottomley wrote:
> On Thu, 2009-04-30 at 16:47 +0300, Boaz Harrosh wrote:
>>> @@ -966,7 +965,7 @@ static int scsi_init_sgtable(struct request
>> *req, struct scsi_data_buffer *sdb,
>>> BUG_ON(count > sdb->table.nents);
>>> sdb->table.nents = count;
>>> if (blk_pc_request(req))
>>> - sdb->length = req->data_len;
>>> + sdb->length = blk_rq_bytes(req);
>>> else
>>> sdb->length = blk_rq_sectors(req) << 9;
>> Is this true. I thought they must be the same now. I was actually
>> anticipating this if() removed.
>
> Me too ... there's one of these in scsi_lib.c as well.
Not until the next patch. It's probably safe for scsi to make the
switch here but I wanted to do the transition in two logical steps -
1. make all users use accessors in the defined manner without
affecting anything else 2. knowing #1 is true for all low level
drivers, unify implementation inside block layer. I had a following
patch which tried to do sweep conversion of all llds (which is
guaranteed to be safe after #2 has happened) but it looked like more
trouble than worth and seems like best left to each subsystem, so
please go ahead and clean up subsystems on top of this patchset. :-)
> The difference comes because filesystem requests are always in sectors,
> but BLOCK_PC requests are always in bytes .... we should be able to wrap
> the accessors so they do the correct conversions.
After this series is applied, blk_rq_bytes() >> 9 == blk_rq_sectors()
is guaranteed (note that blk_rq_sectors() << 9 might not equal
blk_rq_bytes() if the data transfer length isn't multiple of 512), so
the above if can be removed. I just didn't want to make the
conversion (probably safe for scsi) before the actual unification.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 08/10] block: cleanup rq->data_len usages
2009-04-30 13:47 ` Boaz Harrosh
2009-04-30 15:35 ` James Bottomley
@ 2009-05-03 1:36 ` Tejun Heo
1 sibling, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-05-03 1:36 UTC (permalink / raw)
To: Boaz Harrosh
Cc: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, grant.likely, paul.clements,
jesper.juhl, tim, jeremy, adrian, oakad, dwmw2, schwidefsky,
ballabio_dario, davem, rusty, Markus.Lidel, Darrick J. Wong
Hello, Boaz.
Boaz Harrosh wrote:
>> /* The req and req->next_rq have not been completed */
>> - BUG_ON(blk_end_bidi_request(req, 0, dlen, next_dlen));
>> + BUG_ON(blk_end_bidi_request(req, 0, blk_rq_bytes(req),
>> + blk_rq_bytes(req->next_rq)));
>>
>
> Just blk_end_request_all() actually. If you let blk_end_request_all
> also do bidi
I wrote in the other reply but I don't want to make any other change
than converting direct accesses to accessors in this patch, so that we
can _know_ this patch is safe. Patches in this series are already all
over the place. But, yeah, cleaning this up would be great. Care to
send a patch?
>> scsi_release_buffers(cmd);
>>
>
> and then it can be in-lined into caller, where blk_pc_request(req)
> just do blk_end_request_all regardless (and only the residual
> setting is conditional)
>
> I'll send a patch to scsi_lib later once this settles a bit.
Ah.. cool. :-)
>> @@ -966,7 +965,7 @@ static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb,
>> BUG_ON(count > sdb->table.nents);
>> sdb->table.nents = count;
>> if (blk_pc_request(req))
>> - sdb->length = req->data_len;
>> + sdb->length = blk_rq_bytes(req);
>> else
>> sdb->length = blk_rq_sectors(req) << 9;
>
> Is this true. I thought they must be the same now. I was actually
> anticipating this if() removed.
Replied in the other reply.
>> /* FIXME: should be include in osd_sense_info */
>> if (in_resid)
>> - *in_resid = or->in.req ? or->in.req->data_len : 0;
>> + *in_resid = or->in.req ? blk_rq_bytes(or->in.req) : 0;
>
> + *in_resid = or->in.req ? or->in.req->resid_len : 0;
>
>>
>> if (out_resid)
>> - *out_resid = or->out.req ? or->out.req->data_len : 0;
>> + *out_resid = or->out.req ? blk_rq_bytes(or->out.req) : 0;
>
> + *out_resid = or->out.req ? or->out.req->resid_len : 0;
>
>>
>> return ret;
>> }
>
> OK This segment is wrong. It should be moved to the residual count patch
> (PATCH 3/10) the assignment into *in_resid/*out_resid should shourly triggered
> a warning ;-)
Ah... thanks a lot for spotting it. Will fix.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [GIT PATCH] block,scsi,ide: unify sector and data_len
2009-05-01 18:29 ` Jens Axboe
@ 2009-05-03 2:50 ` Tejun Heo
0 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-05-03 2:50 UTC (permalink / raw)
To: Jens Axboe
Cc: linux-kernel, jeff, linux-ide, James.Bottomley, linux-scsi,
bzolnier, petkovbb, sshtylyov, mike.miller, chirag.kantharia,
Eric.Moore, stern, fujita.tomonori, zaitcev, Geert.Uytterhoeven,
sfr, grant.likely, paul.clements, jesper.juhl, tim, jeremy,
adrian, oakad, dwmw2, schwidefsky, ballabio_dario, davem, rusty,
Markus.Lidel, bharrosh
Hello,
Jens Axboe wrote:
> On Wed, Apr 29 2009, Tejun Heo wrote:
>> Hello,
>>
>> Upon ack, please pull from the following git tree.
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.git block-unify-sector-and-data_len
>
> Looks sane. When you have collected acks and made suggested changes,
> please repost it and I'll integrate it.
Will do.
> Note that I wont be very responsive the next week or so, taking care
> of a new aspiring kernel hacker.
Alright. I'm not getting a lot of work done past few days either cuz
I purchased fallout3 and still have a serious score to settle with the
old man.
Thanks and have fun with the newbie. :-)
--
tejun
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 08/10] block: cleanup rq->data_len usages
2009-05-03 1:32 ` Tejun Heo
@ 2009-05-03 13:51 ` Boaz Harrosh
2009-05-04 4:19 ` Tejun Heo
0 siblings, 1 reply; 56+ messages in thread
From: Boaz Harrosh @ 2009-05-03 13:51 UTC (permalink / raw)
To: Tejun Heo
Cc: James Bottomley, axboe, linux-kernel, jeff, linux-ide,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, grant.likely, paul.clements,
jesper.juhl, tim, jeremy, adrian, oakad, dwmw2, schwidefsky,
ballabio_dario, davem, rusty, Markus.Lidel, Darrick J. Wong
On 05/03/2009 04:32 AM, Tejun Heo wrote:
> James Bottomley wrote:
>> On Thu, 2009-04-30 at 16:47 +0300, Boaz Harrosh wrote:
>>>> @@ -966,7 +965,7 @@ static int scsi_init_sgtable(struct request
>>> *req, struct scsi_data_buffer *sdb,
>>>> BUG_ON(count > sdb->table.nents);
>>>> sdb->table.nents = count;
>>>> if (blk_pc_request(req))
>>>> - sdb->length = req->data_len;
>>>> + sdb->length = blk_rq_bytes(req);
>>>> else
>>>> sdb->length = blk_rq_sectors(req) << 9;
>>> Is this true. I thought they must be the same now. I was actually
>>> anticipating this if() removed.
>> Me too ... there's one of these in scsi_lib.c as well.
>
> Not until the next patch. It's probably safe for scsi to make the
> switch here but I wanted to do the transition in two logical steps -
> 1. make all users use accessors in the defined manner without
> affecting anything else 2. knowing #1 is true for all low level
> drivers, unify implementation inside block layer. I had a following
> patch which tried to do sweep conversion of all llds (which is
> guaranteed to be safe after #2 has happened) but it looked like more
> trouble than worth and seems like best left to each subsystem, so
> please go ahead and clean up subsystems on top of this patchset. :-)
>
>> The difference comes because filesystem requests are always in sectors,
>> but BLOCK_PC requests are always in bytes .... we should be able to wrap
>> the accessors so they do the correct conversions.
>
> After this series is applied, blk_rq_bytes() >> 9 == blk_rq_sectors()
> is guaranteed (note that blk_rq_sectors() << 9 might not equal
> blk_rq_bytes() if the data transfer length isn't multiple of 512), so
> the above if can be removed. I just didn't want to make the
> conversion (probably safe for scsi) before the actual unification.
>
> Thanks.
>
OK, NP. But in this case please note on the side all the places you think
might be suspect for blk_rq_bytes()/blk_rq_sectors() cosolidation and post the
list. Because it is now that you are going over the code and it is now that you
touch exactly all these places.
You could even put a "TODO:" comments on all these places in this patch. So to draw
later patches that audit and remove the TODO:.
(Or in trivial places like above that are safe even before these patches, just
convert them silently, in the sense of least traffic)
But sure I will see what I can help and send patches for. Tell me when you
think this is stable enough for me to add patches on top of.
Thanks
Boaz
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 08/10] block: cleanup rq->data_len usages
2009-05-03 13:51 ` Boaz Harrosh
@ 2009-05-04 4:19 ` Tejun Heo
0 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-05-04 4:19 UTC (permalink / raw)
To: Boaz Harrosh
Cc: James Bottomley, axboe, linux-kernel, jeff, linux-ide,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, grant.likely, paul.clements,
jesper.juhl, tim, jeremy, adrian, oakad, dwmw2, schwidefsky,
ballabio_dario, davem, rusty, Markus.Lidel, Darrick J. Wong
Hello,
Boaz Harrosh wrote:
> OK, NP. But in this case please note on the side all the places you
> think might be suspect for blk_rq_bytes()/blk_rq_sectors()
> cosolidation and post the list. Because it is now that you are going
> over the code and it is now that you touch exactly all these places.
>
> You could even put a "TODO:" comments on all these places in this
> patch. So to draw later patches that audit and remove the TODO:.
Heh... okay. I'll add a patch for the sweep conversion.
> (Or in trivial places like above that are safe even before these
> patches, just convert them silently, in the sense of least traffic)
I really don't want to do that. Things which might look trivial often
break things and this part of API has been quite fragile, so I'd
rather put those changes after the actual unification for, if nothing
else, documentation.
> But sure I will see what I can help and send patches for. Tell me
> when you think this is stable enough for me to add patches on top
> of.
Yeap, I just finished saving the wasteland, so the refreshed patchset
will be posted later today. :-)
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH 07/10] block: drop request->hard_* and *nr_sectors
2009-04-30 13:46 ` Boaz Harrosh
@ 2009-05-04 5:06 ` Tejun Heo
0 siblings, 0 replies; 56+ messages in thread
From: Tejun Heo @ 2009-05-04 5:06 UTC (permalink / raw)
To: Boaz Harrosh
Cc: axboe, linux-kernel, jeff, linux-ide, James.Bottomley,
linux-scsi, bzolnier, petkovbb, sshtylyov, mike.miller,
chirag.kantharia, Eric.Moore, stern, fujita.tomonori, zaitcev,
Geert.Uytterhoeven, sfr, grant.likely, paul.clements,
jesper.juhl, tim, jeremy, adrian, oakad, dwmw2, schwidefsky,
ballabio_dario, davem, rusty, Markus.Lidel
Hello, Boaz.
Boaz Harrosh wrote:
>> @@ -1926,8 +1892,25 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
>> bio_iovec(bio)->bv_len -= nr_bytes;
>> }
>>
>> - blk_recalc_rq_sectors(req, total_bytes >> 9);
>> + req->data_len -= total_bytes;
>> + req->buffer = bio_data(req->bio);
>> +
>> + /* update sector only for requests with clear definition of sector */
>> + if (blk_fs_request(req) || blk_discard_rq(req))
>> + req->sector += total_bytes >> 9;
>> +
>> + /*
>> + * If total number of sectors is less than the first segment
>> + * size, something has gone terribly wrong.
>> + */
>> + if (blk_rq_bytes(req) < blk_rq_cur_bytes(req)) {
>> + printk(KERN_ERR "blk: request botched\n");
>> + req->data_len = blk_rq_cur_bytes(req);
>> + }
>
> What happens in the last bio/segment?
Can you please elaborate a bit? Nothing really changes for the last
bio/segment.
> Is it not allowed with block_pc commands that blk_rq_bytes(req) (was
> data_len) be smaller then sum_bytes(bio-chain)?
Well, before, it wasn't well defined. For PC requests w/o bio, any
completion was full completion which isn't exactly data_len being
allowed to be shorter than actual data length but more like data_len
being completely ignored. If a PC request has bio, the request should
be completed with full bio data length. After recent changes, all PC
requests use bio and thus should fully complete the PC requests and
this patch doesn't change anything about that.
> Also I never understood the drain is it not appended to the last
> bio? I thought it is costumery in the Kernel to allow mapping longer
> then actual length?
drain is implemented in slightly hacky way. All that's guaranteed is
extra room in the mapped sgl. bio never sees it.
> Maybe you would want blk_rq_cur_bytes(req) to return the minimum of
> the two, and let bio's be longer then bytes requested. (ie. reverse
> above logic)
No, blk_rq_bytes() == sum of bio_rq_cur_bytes() of all bios in the
request and must NEVER be shorter than bio_rq_cur_bytes() by
definition.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 56+ messages in thread
end of thread, other threads:[~2009-05-04 5:16 UTC | newest]
Thread overview: 56+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-04-29 9:13 [GIT PATCH] block,scsi,ide: unify sector and data_len Tejun Heo
2009-04-29 9:13 ` Tejun Heo
2009-04-29 9:13 ` [PATCH 01/10] nbd: don't clear rq->sector and nr_sectors unnecessarily Tejun Heo
2009-04-29 9:13 ` Tejun Heo
2009-04-29 9:13 ` [PATCH 02/10] ide-tape: don't initialize rq->sector for rw requests Tejun Heo
2009-04-29 9:13 ` Tejun Heo
2009-04-30 6:14 ` Borislav Petkov
2009-04-29 9:13 ` [PATCH 03/10] block: add rq->resid_len Tejun Heo
2009-04-29 9:13 ` Tejun Heo
2009-04-29 14:41 ` James Bottomley
2009-04-30 1:59 ` Tejun Heo
2009-04-30 6:45 ` Borislav Petkov
2009-04-30 7:19 ` Tejun Heo
2009-04-30 7:19 ` Tejun Heo
2009-04-30 7:19 ` Tejun Heo
2009-04-30 7:37 ` Borislav Petkov
2009-04-30 9:25 ` Tejun Heo
2009-04-30 9:25 ` Tejun Heo
2009-04-30 9:25 ` Tejun Heo
2009-04-29 9:13 ` [PATCH 04/10] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones Tejun Heo
2009-04-29 9:13 ` Tejun Heo
2009-04-29 9:25 ` Geert Uytterhoeven
2009-04-29 9:25 ` Geert Uytterhoeven
2009-04-29 10:16 ` Tejun Heo
2009-04-29 14:18 ` Stephen Rothwell
2009-04-29 14:49 ` Grant Likely
2009-04-29 14:49 ` Grant Likely
2009-04-29 9:13 ` [PATCH 05/10] block: convert to pos and nr_sectors accessors Tejun Heo
2009-04-29 9:13 ` Tejun Heo
2009-04-29 9:40 ` Geert Uytterhoeven
2009-04-29 9:40 ` Geert Uytterhoeven
2009-04-29 10:19 ` Tejun Heo
2009-04-29 14:48 ` Grant Likely
[not found] ` <1241037446.4516.2.camel@localhost.localdomain>
2009-04-30 17:30 ` Adrian McMenamin
2009-04-29 9:13 ` [PATCH 06/10] ide: convert to rq " Tejun Heo
2009-04-29 9:13 ` Tejun Heo
2009-04-29 9:13 ` [PATCH 07/10] block: drop request->hard_* and *nr_sectors Tejun Heo
2009-04-29 9:13 ` Tejun Heo
2009-04-30 13:46 ` Boaz Harrosh
2009-05-04 5:06 ` Tejun Heo
2009-04-29 9:13 ` [PATCH 08/10] block: cleanup rq->data_len usages Tejun Heo
2009-04-29 9:13 ` Tejun Heo
2009-04-30 13:47 ` Boaz Harrosh
2009-04-30 15:35 ` James Bottomley
2009-05-01 18:27 ` Jens Axboe
2009-05-03 1:32 ` Tejun Heo
2009-05-03 13:51 ` Boaz Harrosh
2009-05-04 4:19 ` Tejun Heo
2009-05-03 1:36 ` Tejun Heo
2009-04-29 9:13 ` [PATCH 09/10] ide: " Tejun Heo
2009-04-29 9:13 ` Tejun Heo
2009-04-29 9:13 ` [PATCH 10/10] block: hide request sector and data_len Tejun Heo
2009-04-29 9:13 ` Tejun Heo
2009-04-30 16:07 ` [GIT PATCH] block,scsi,ide: unify " Bartlomiej Zolnierkiewicz
2009-05-01 18:29 ` Jens Axboe
2009-05-03 2:50 ` Tejun Heo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.