All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tom Rix <Tom.Rix@windriver.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 02/10] USB add macros for debugging usb device setup.
Date: Sat, 31 Oct 2009 12:37:39 -0500	[thread overview]
Message-ID: <1257010667-10834-3-git-send-email-Tom.Rix@windriver.com> (raw)
In-Reply-To: <1257010667-10834-2-git-send-email-Tom.Rix@windriver.com>

When developing usb device features, it is useful to print out
common usb structures.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
---
 include/usbdescriptors.h |   26 ++++++++++++
 include/usbdevice.h      |  103 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 129 insertions(+), 0 deletions(-)

diff --git a/include/usbdescriptors.h b/include/usbdescriptors.h
index a752097..2dec3b9 100644
--- a/include/usbdescriptors.h
+++ b/include/usbdescriptors.h
@@ -504,4 +504,30 @@ struct usb_class_descriptor {
 
 } __attribute__ ((packed));
 
+#ifdef DEBUG
+static inline void print_device_descriptor(struct usb_device_descriptor *d)
+{
+	serial_printf("usb device descriptor \n");
+	serial_printf("\tbLength %2.2x\n", d->bLength);
+	serial_printf("\tbDescriptorType %2.2x\n", d->bDescriptorType);
+	serial_printf("\tbcdUSB %4.4x\n", d->bcdUSB);
+	serial_printf("\tbDeviceClass %2.2x\n", d->bDeviceClass);
+	serial_printf("\tbDeviceSubClass %2.2x\n", d->bDeviceSubClass);
+	serial_printf("\tbDeviceProtocol %2.2x\n", d->bDeviceProtocol);
+	serial_printf("\tbMaxPacketSize0 %2.2x\n", d->bMaxPacketSize0);
+	serial_printf("\tidVendor %4.4x\n", d->idVendor);
+	serial_printf("\tidProduct %4.4x\n", d->idProduct);
+	serial_printf("\tbcdDevice %4.4x\n", d->bcdDevice);
+	serial_printf("\tiManufacturer %2.2x\n", d->iManufacturer);
+	serial_printf("\tiProduct %2.2x\n", d->iProduct);
+	serial_printf("\tiSerialNumber %2.2x\n", d->iSerialNumber);
+	serial_printf("\tbNumConfigurations %2.2x\n", d->bNumConfigurations);
+}
+
+#else
+
+/* stubs */
+#define print_device_descriptor(d)
+
+#endif /* DEBUG */
 #endif
diff --git a/include/usbdevice.h b/include/usbdevice.h
index 206dbbc..4171636 100644
--- a/include/usbdevice.h
+++ b/include/usbdevice.h
@@ -663,4 +663,107 @@ int usbd_endpoint_halted (struct usb_device_instance *device, int endpoint);
 void usbd_rcv_complete(struct usb_endpoint_instance *endpoint, int len, int urb_bad);
 void usbd_tx_complete (struct usb_endpoint_instance *endpoint);
 
+/* These are macros used in debugging */
+#ifdef DEBUG
+static inline void print_urb(struct urb *u)
+{
+	serial_printf("urb %p\n", (u));
+	serial_printf("\tendpoint %p\n", u->endpoint);
+	serial_printf("\tdevice %p\n", u->device);
+	serial_printf("\tbuffer %p\n", u->buffer);
+	serial_printf("\tbuffer_length %d\n", u->buffer_length);
+	serial_printf("\tactual_length %d\n", u->actual_length);
+	serial_printf("\tstatus %d\n", u->status);
+	serial_printf("\tdata %d\n", u->data);
+}
+
+static inline void print_usb_device_request(struct usb_device_request *r)
+{
+	serial_printf("usb request\n");
+	serial_printf("\tbmRequestType 0x%2.2x\n", r->bmRequestType);
+	if ((r->bmRequestType & USB_REQ_DIRECTION_MASK) == 0)
+		serial_printf("\t\tDirection : To device\n");
+	else
+		serial_printf("\t\tDirection : To host\n");
+	if ((r->bmRequestType & USB_TYPE_STANDARD) == USB_TYPE_STANDARD)
+		serial_printf("\t\tType      : Standard\n");
+	if ((r->bmRequestType & USB_TYPE_CLASS) == USB_TYPE_CLASS)
+		serial_printf("\t\tType      : Standard\n");
+	if ((r->bmRequestType & USB_TYPE_VENDOR) == USB_TYPE_VENDOR)
+		serial_printf("\t\tType      : Standard\n");
+	if ((r->bmRequestType & USB_TYPE_RESERVED) == USB_TYPE_RESERVED)
+		serial_printf("\t\tType      : Standard\n");
+	if ((r->bmRequestType & USB_REQ_RECIPIENT_MASK) ==
+	    USB_REQ_RECIPIENT_DEVICE)
+		serial_printf("\t\tRecipient : Device\n");
+	if ((r->bmRequestType & USB_REQ_RECIPIENT_MASK) ==
+	    USB_REQ_RECIPIENT_INTERFACE)
+		serial_printf("\t\tRecipient : Interface\n");
+	if ((r->bmRequestType & USB_REQ_RECIPIENT_MASK) ==
+	    USB_REQ_RECIPIENT_ENDPOINT)
+		serial_printf("\t\tRecipient : Endpoint\n");
+	if ((r->bmRequestType & USB_REQ_RECIPIENT_MASK) ==
+	    USB_REQ_RECIPIENT_OTHER)
+		serial_printf("\t\tRecipient : Other\n");
+	serial_printf("\tbRequest      0x%2.2x\n", r->bRequest);
+	if (r->bRequest == USB_REQ_GET_STATUS)
+		serial_printf("\t\tGET_STATUS\n");
+	else if (r->bRequest == USB_REQ_SET_ADDRESS)
+		serial_printf("\t\tSET_ADDRESS\n");
+	else if (r->bRequest == USB_REQ_SET_FEATURE)
+		serial_printf("\t\tSET_FEATURE\n");
+	else if (r->bRequest == USB_REQ_GET_DESCRIPTOR)
+		serial_printf("\t\tGET_DESCRIPTOR\n");
+	else if (r->bRequest == USB_REQ_SET_CONFIGURATION)
+		serial_printf("\t\tSET_CONFIGURATION\n");
+	else if (r->bRequest == USB_REQ_SET_INTERFACE)
+		serial_printf("\t\tUSB_REQ_SET_INTERFACE\n");
+	else
+		serial_printf("\tUNKNOWN %d\n", r->bRequest);
+	serial_printf("\twValue        0x%4.4x\n", r->wValue);
+	if (r->bRequest == USB_REQ_GET_DESCRIPTOR) {
+		switch (r->wValue >> 8) {
+		case USB_DESCRIPTOR_TYPE_DEVICE:
+			serial_printf("\tDEVICE\n");
+			break;
+		case USB_DESCRIPTOR_TYPE_CONFIGURATION:
+			serial_printf("\tCONFIGURATION\n");
+			break;
+		case USB_DESCRIPTOR_TYPE_STRING:
+			serial_printf("\tSTRING\n");
+			break;
+		case USB_DESCRIPTOR_TYPE_INTERFACE:
+			serial_printf("\tINTERFACE\n");
+			break;
+		case USB_DESCRIPTOR_TYPE_ENDPOINT:
+			serial_printf("\tENDPOINT\n");
+			break;
+		case USB_DESCRIPTOR_TYPE_DEVICE_QUALIFIER:
+			serial_printf("\tDEVICE_QUALIFIER\n");
+			break;
+		case USB_DESCRIPTOR_TYPE_OTHER_SPEED_CONFIGURATION:
+			serial_printf("\tOTHER_SPEED_CONFIGURATION\n");
+			break;
+		case USB_DESCRIPTOR_TYPE_INTERFACE_POWER:
+			serial_printf("\tINTERFACE_POWER\n");
+			break;
+		case USB_DESCRIPTOR_TYPE_HID:
+			serial_printf("\tHID\n");
+			break;
+		case USB_DESCRIPTOR_TYPE_REPORT:
+			serial_printf("\tREPORT\n");
+			break;
+		default:
+			serial_printf("\tUNKNOWN TYPE\n");
+			break;
+		}
+	}
+	serial_printf("\twIndex        0x%4.4x\n", r->wIndex);
+	serial_printf("\twLength       0x%4.4x\n", r->wLength);
+}
+#else
+/* stubs */
+#define print_urb(u)
+#define print_usb_device_request(r)
+#endif /* DEBUG */
 #endif
-- 
1.6.0.6

  reply	other threads:[~2009-10-31 17:37 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-10-31 17:37 [U-Boot] v3 OMAP USB Tom Rix
2009-10-31 17:37 ` [U-Boot] [PATCH 01/10] USB Consolidate descriptor definitions Tom Rix
2009-10-31 17:37   ` Tom Rix [this message]
2009-10-31 17:37     ` [U-Boot] [PATCH 03/10] TWL4030 Add usb PHY support Tom Rix
2009-10-31 17:37       ` [U-Boot] [PATCH 04/10] OMAP3 Add usb device support Tom Rix
2009-10-31 17:37         ` [U-Boot] [PATCH 05/10] OMAP3 zoom1 Add usbtty configuration Tom Rix
2009-10-31 17:37           ` [U-Boot] [PATCH 06/10] OMAP3 beagle " Tom Rix
2009-10-31 17:37             ` [U-Boot] [PATCH 07/10] USBTTY make some function declarations easier to use Tom Rix
2009-10-31 17:37               ` [U-Boot] [PATCH 08/10] OMAP3 zoom2 Use usbtty if the debug board is not connected Tom Rix
2009-10-31 17:37                 ` [U-Boot] [PATCH 09/10] OMAP3 USB Initialize twl4030 only if required Tom Rix
2009-10-31 17:37                   ` [U-Boot] [PATCH 10/10] omap3evm: musb: add USB config Tom Rix
2009-10-31 21:49                   ` [U-Boot] [PATCH 09/10] OMAP3 USB Initialize twl4030 only if required Mike Frysinger
2009-11-01  2:09                     ` Tom
2009-11-01 13:35                       ` Mike Frysinger
2009-10-31 21:47                 ` [U-Boot] [PATCH 08/10] OMAP3 zoom2 Use usbtty if the debug board is not connected Mike Frysinger
2009-11-01  2:03                   ` Tom
2009-11-01 13:33                     ` Mike Frysinger
2009-11-01 14:14                       ` Tom
2009-11-01 14:55                         ` Mike Frysinger
2009-10-31 21:46     ` [U-Boot] [PATCH 02/10] USB add macros for debugging usb device setup Mike Frysinger
2009-11-01  2:00       ` Tom
2009-11-01 13:32         ` Mike Frysinger
2009-11-01 14:02           ` Tom
2009-11-01 14:09             ` Mike Frysinger
2009-11-01 14:29               ` Tom
2009-11-04 15:06 ` [U-Boot] v3 OMAP USB Tom
2009-11-04 15:28   ` Mike Frysinger
2009-11-04 20:21   ` Remy Bohmer
2009-11-05  3:38     ` Gupta, Ajay Kumar
2009-11-05  9:42       ` Remy Bohmer
2009-11-05 13:44         ` Tom
2009-11-05 15:42           ` Remy Bohmer
2009-11-06 18:01             ` [U-Boot] AT91 runnable out of RAM ? Tom Rix
2009-11-07  7:50               ` Remy Bohmer
2009-11-07 12:13                 ` Tom Rix

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1257010667-10834-3-git-send-email-Tom.Rix@windriver.com \
    --to=tom.rix@windriver.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.