[PATCH v2 00/20] o11s update to latest draft

[PATCH v2 00/20] o11s update to latest draft

[Rui Paulo]

Hi again,

Here's take two of the mesh update patch. As I already said, the following
patches update the mesh code to latest draft, 3.03. They also include some
minor cleanups and improved debugging.

 include/linux/ieee80211.h     |   17 +
 include/linux/nl80211.h       |   11 -
 include/net/cfg80211.h        |    9 
 net/mac80211/Kconfig          |   13 +
 net/mac80211/cfg.c            |   15 +
 net/mac80211/debugfs_netdev.c |    2 
 net/mac80211/ieee80211_i.h    |   23 +-
 net/mac80211/mesh.c           |  143 ++++++++-----
 net/mac80211/mesh.h           |   30 +-
 net/mac80211/mesh_hwmp.c      |  454 +++++++++++++++++++++++++++---------------
 net/mac80211/mesh_pathtbl.c   |   20 +
 net/mac80211/mesh_plink.c     |   56 +++--
 net/mac80211/rx.c             |    2 
 net/mac80211/tx.c             |    2 
 net/mac80211/util.c           |    6 
 net/wireless/nl80211.c        |   12 -
 16 files changed, 541 insertions(+), 274 deletions(-)

Regards,
--
Rui Paulo

[PATCH v2 01/20] mac80211: update meshconf IE

[Rui Paulo]

This updates the Mesh Configuration IE according to the latest
draft (3.03).
Notable changes include the simplified protocol IDs.

Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
---
 include/linux/ieee80211.h  |    2 +-
 net/mac80211/ieee80211_i.h |   10 +++---
 net/mac80211/mesh.c        |   69 ++++++++++++++++++-------------------------
 3 files changed, 35 insertions(+), 46 deletions(-)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 0aa8314..50c684d 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -115,7 +115,7 @@
 #define IEEE80211_MAX_SSID_LEN		32
 
 #define IEEE80211_MAX_MESH_ID_LEN	32
-#define IEEE80211_MESH_CONFIG_LEN	24
+#define IEEE80211_MESH_CONFIG_LEN	7
 
 #define IEEE80211_QOS_CTL_LEN		2
 #define IEEE80211_QOS_CTL_TID_MASK	0x000F
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 1ef7673..1f4f88a 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -361,15 +361,15 @@ struct ieee80211_if_mesh {
 	u8 mesh_id[IEEE80211_MAX_MESH_ID_LEN];
 	size_t mesh_id_len;
 	/* Active Path Selection Protocol Identifier */
-	u8 mesh_pp_id[4];
+	u8 mesh_pp_id;
 	/* Active Path Selection Metric Identifier */
-	u8 mesh_pm_id[4];
+	u8 mesh_pm_id;
 	/* Congestion Control Mode Identifier */
-	u8 mesh_cc_id[4];
+	u8 mesh_cc_id;
 	/* Synchronization Protocol Identifier */
-	u8 mesh_sp_id[4];
+	u8 mesh_sp_id;
 	/* Authentication Protocol Identifier */
-	u8 mesh_auth_id[4];
+	u8 mesh_auth_id;
 	/* Local mesh Destination Sequence Number */
 	u32 dsn;
 	/* Last used PREQ ID */
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 9a73389..a49a337 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -15,14 +15,14 @@
 #define IEEE80211_MESH_PEER_INACTIVITY_LIMIT (1800 * HZ)
 #define IEEE80211_MESH_HOUSEKEEPING_INTERVAL (60 * HZ)
 
-#define PP_OFFSET 	1		/* Path Selection Protocol */
-#define PM_OFFSET	5		/* Path Selection Metric   */
-#define CC_OFFSET	9		/* Congestion Control Mode */
-#define SP_OFFSET	13		/* Synchronization Protocol */
-#define AUTH_OFFSET	17		/* Authentication Protocol */
-#define CAPAB_OFFSET 	22
-#define CAPAB_ACCEPT_PLINKS 0x80
-#define CAPAB_FORWARDING    0x10
+#define MESHCONF_PP_OFFSET 	0		/* Path Selection Protocol */
+#define MESHCONF_PM_OFFSET	1		/* Path Selection Metric   */
+#define MESHCONF_CC_OFFSET	2		/* Congestion Control Mode */
+#define MESHCONF_SP_OFFSET	3		/* Synchronization Protocol */
+#define MESHCONF_AUTH_OFFSET	4		/* Authentication Protocol */
+#define MESHCONF_CAPAB_OFFSET 	6
+#define MESHCONF_CAPAB_ACCEPT_PLINKS 0x01
+#define MESHCONF_CAPAB_FORWARDING    0x08
 
 #define TMR_RUNNING_HK	0
 #define TMR_RUNNING_MP	1
@@ -85,11 +85,12 @@ bool mesh_matches_local(struct ieee802_11_elems *ie, struct ieee80211_sub_if_dat
 	 */
 	if (ifmsh->mesh_id_len == ie->mesh_id_len &&
 		memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 &&
-		memcmp(ifmsh->mesh_pp_id, ie->mesh_config + PP_OFFSET, 4) == 0 &&
-		memcmp(ifmsh->mesh_pm_id, ie->mesh_config + PM_OFFSET, 4) == 0 &&
-		memcmp(ifmsh->mesh_cc_id, ie->mesh_config + CC_OFFSET, 4) == 0 &&
-		memcmp(ifmsh->mesh_sp_id, ie->mesh_config + SP_OFFSET, 4) == 0 &&
-		memcmp(ifmsh->mesh_auth_id, ie->mesh_config + AUTH_OFFSET, 4) == 0)
+		(ifmsh->mesh_pp_id == *(ie->mesh_config + MESHCONF_PP_OFFSET))&&
+		(ifmsh->mesh_pm_id == *(ie->mesh_config + MESHCONF_PM_OFFSET))&&
+		(ifmsh->mesh_cc_id == *(ie->mesh_config + MESHCONF_CC_OFFSET))&&
+		(ifmsh->mesh_sp_id == *(ie->mesh_config + MESHCONF_SP_OFFSET))&&
+		(ifmsh->mesh_auth_id == *(ie->mesh_config +
+		    MESHCONF_AUTH_OFFSET)))
 		return true;
 
 	return false;
@@ -102,7 +103,8 @@ bool mesh_matches_local(struct ieee802_11_elems *ie, struct ieee80211_sub_if_dat
  */
 bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie)
 {
-	return (*(ie->mesh_config + CAPAB_OFFSET) & CAPAB_ACCEPT_PLINKS) != 0;
+	return (*(ie->mesh_config + MESHCONF_CAPAB_OFFSET) &
+	    MESHCONF_CAPAB_ACCEPT_PLINKS) != 0;
 }
 
 /**
@@ -128,18 +130,11 @@ void mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata)
 
 void mesh_ids_set_default(struct ieee80211_if_mesh *sta)
 {
-	u8 oui[3] = {0x00, 0x0F, 0xAC};
-
-	memcpy(sta->mesh_pp_id, oui, sizeof(oui));
-	memcpy(sta->mesh_pm_id, oui, sizeof(oui));
-	memcpy(sta->mesh_cc_id, oui, sizeof(oui));
-	memcpy(sta->mesh_sp_id, oui, sizeof(oui));
-	memcpy(sta->mesh_auth_id, oui, sizeof(oui));
-	sta->mesh_pp_id[sizeof(oui)] = 0;
-	sta->mesh_pm_id[sizeof(oui)] = 0;
-	sta->mesh_cc_id[sizeof(oui)] = 0xff;
-	sta->mesh_sp_id[sizeof(oui)] = 0xff;
-	sta->mesh_auth_id[sizeof(oui)] = 0x0;
+	sta->mesh_pp_id = 0;	/* HWMP */
+	sta->mesh_pm_id = 0;	/* Airtime */
+	sta->mesh_cc_id = 0;	/* Disabled */
+	sta->mesh_sp_id = 0;	/* Neighbor Offset */
+	sta->mesh_auth_id = 0;	/* Disabled */
 }
 
 int mesh_rmc_init(struct ieee80211_sub_if_data *sdata)
@@ -260,28 +255,21 @@ void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
 	pos = skb_put(skb, 2 + IEEE80211_MESH_CONFIG_LEN);
 	*pos++ = WLAN_EID_MESH_CONFIG;
 	*pos++ = IEEE80211_MESH_CONFIG_LEN;
-	/* Version */
-	*pos++ = 1;
 
 	/* Active path selection protocol ID */
-	memcpy(pos, sdata->u.mesh.mesh_pp_id, 4);
-	pos += 4;
+	*pos++ = sdata->u.mesh.mesh_pp_id;
 
 	/* Active path selection metric ID   */
-	memcpy(pos, sdata->u.mesh.mesh_pm_id, 4);
-	pos += 4;
+	*pos++ = sdata->u.mesh.mesh_pm_id;
 
 	/* Congestion control mode identifier */
-	memcpy(pos, sdata->u.mesh.mesh_cc_id, 4);
-	pos += 4;
+	*pos++ = sdata->u.mesh.mesh_cc_id;
 
 	/* Synchronization protocol identifier */
-	memcpy(pos, sdata->u.mesh.mesh_sp_id, 4);
-	pos += 4;
+	*pos++ = sdata->u.mesh.mesh_sp_id;
 
 	/* Authentication Protocol identifier */
-	memcpy(pos, sdata->u.mesh.mesh_auth_id, 4);
-	pos += 4;
+	*pos++ = sdata->u.mesh.mesh_auth_id;
 
 	/* Mesh Formation Info */
 	memset(pos, 0x00, 1);
@@ -289,8 +277,9 @@ void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
 
 	/* Mesh capability */
 	sdata->u.mesh.accepting_plinks = mesh_plink_availables(sdata);
-	*pos = CAPAB_FORWARDING;
-	*pos++ |= sdata->u.mesh.accepting_plinks ? CAPAB_ACCEPT_PLINKS : 0x00;
+	*pos = MESHCONF_CAPAB_FORWARDING;
+	*pos++ |= sdata->u.mesh.accepting_plinks ?
+	    MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00;
 	*pos++ = 0x00;
 
 	return;
-- 
1.5.6.5

[PATCH v2 02/20] mac80211: set MESH_TTL to 31

[Rui Paulo]

Update the mesh time to live field to 31 according to draft 3.03.

Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
---
 net/mac80211/mesh.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index dd1c193..9948107 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -174,7 +174,7 @@ struct mesh_rmc {
 #define MESH_CFG_CMP_LEN 	(IEEE80211_MESH_CONFIG_LEN - 2)
 
 /* Default values, timeouts in ms */
-#define MESH_TTL 		5
+#define MESH_TTL 		31
 #define MESH_MAX_RETR	 	3
 #define MESH_RET_T 		100
 #define MESH_CONF_T 		100
-- 
1.5.6.5

[PATCH v2 03/20] mac80211: implement the meshconf formation info field

[Rui Paulo]

The Mesh Configuration Formation Info field contains the number of
neighbors.  This means that the beacon must be updated every time a
peer joins or leaves.

Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: Javier Cardona <rpaulo@gmail.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
---
 net/mac80211/mesh.c       |    9 ++++++---
 net/mac80211/mesh_plink.c |    2 ++
 2 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index a49a337..7942518 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -223,6 +223,7 @@ void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
 	struct ieee80211_supported_band *sband;
 	u8 *pos;
 	int len, i, rate;
+	u8 neighbors;
 
 	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
 	len = sband->n_bitrates;
@@ -271,9 +272,11 @@ void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
 	/* Authentication Protocol identifier */
 	*pos++ = sdata->u.mesh.mesh_auth_id;
 
-	/* Mesh Formation Info */
-	memset(pos, 0x00, 1);
-	pos += 1;
+	/* Mesh Formation Info - number of neighbors */
+	neighbors = atomic_read(&sdata->u.mesh.mshstats.estab_plinks);
+	/* Number of neighbor mesh STAs or 15 whichever is smaller */
+	neighbors = (neighbors > 15) ? 15 : neighbors;
+	*pos++ = neighbors << 1;
 
 	/* Mesh capability */
 	sdata->u.mesh.accepting_plinks = mesh_plink_availables(sdata);
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index ffcbad7..f98c8d2 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -65,6 +65,7 @@ void mesh_plink_inc_estab_count(struct ieee80211_sub_if_data *sdata)
 {
 	atomic_inc(&sdata->u.mesh.mshstats.estab_plinks);
 	mesh_accept_plinks_update(sdata);
+	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
 }
 
 static inline
@@ -72,6 +73,7 @@ void mesh_plink_dec_estab_count(struct ieee80211_sub_if_data *sdata)
 {
 	atomic_dec(&sdata->u.mesh.mshstats.estab_plinks);
 	mesh_accept_plinks_update(sdata);
+	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
 }
 
 /**
-- 
1.5.6.5

[PATCH v2 04/20] mac80211: fix typo in a comment

[Rui Paulo]

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
---
 net/mac80211/mesh_plink.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index f98c8d2..4188752 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -79,7 +79,7 @@ void mesh_plink_dec_estab_count(struct ieee80211_sub_if_data *sdata)
 /**
  * mesh_plink_fsm_restart - restart a mesh peer link finite state machine
  *
- * @sta: mes peer link to restart
+ * @sta: mesh peer link to restart
  *
  * Locking: this function must be called holding sta->lock
  */
-- 
1.5.6.5

[PATCH v2 05/20] mac80211: update peer link management IE and action frames

[Rui Paulo]

Update the length and format of the peer link management action frames.

Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
---
 net/mac80211/mesh.c       |    2 +-
 net/mac80211/mesh.h       |    2 +-
 net/mac80211/mesh_plink.c |   32 +++++++++++++++++---------------
 net/mac80211/rx.c         |    2 +-
 4 files changed, 20 insertions(+), 18 deletions(-)

diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 7942518..63427d9 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -553,7 +553,7 @@ static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata,
 					  struct ieee80211_rx_status *rx_status)
 {
 	switch (mgmt->u.action.category) {
-	case PLINK_CATEGORY:
+	case MESH_PLINK_CATEGORY:
 		mesh_rx_plink_frame(sdata, mgmt, len, rx_status);
 		break;
 	case MESH_PATH_SEL_CATEGORY:
diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index 9948107..536d5c0 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -206,7 +206,7 @@ struct mesh_rmc {
 #define MESH_MAX_MPATHS		1024
 
 /* Pending ANA approval */
-#define PLINK_CATEGORY		30
+#define MESH_PLINK_CATEGORY	30
 #define MESH_PATH_SEL_CATEGORY	32
 
 /* Public interfaces */
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 4188752..8a54bc8 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -18,9 +18,8 @@
 #define mpl_dbg(fmt, args...)	do { (void)(0); } while (0)
 #endif
 
-#define PLINK_GET_FRAME_SUBTYPE(p) (p)
-#define PLINK_GET_LLID(p) (p + 1)
-#define PLINK_GET_PLID(p) (p + 3)
+#define PLINK_GET_LLID(p) (p + 4)
+#define PLINK_GET_PLID(p) (p + 6)
 
 #define mod_plink_timer(s, t) (mod_timer(&s->plink_timer, \
 				jiffies + HZ * t / 1000))
@@ -154,6 +153,7 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
 	struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
 	struct ieee80211_mgmt *mgmt;
 	bool include_plid = false;
+	static const u8 meshpeeringproto[] = { 0x00, 0x0F, 0xAC, 0x2A };
 	u8 *pos;
 	int ie_len;
 
@@ -171,7 +171,7 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
 	memcpy(mgmt->da, da, ETH_ALEN);
 	memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
 	/* BSSID is left zeroed, wildcard value */
-	mgmt->u.action.category = PLINK_CATEGORY;
+	mgmt->u.action.category = MESH_PLINK_CATEGORY;
 	mgmt->u.action.u.plink_action.action_code = action;
 
 	if (action == PLINK_CLOSE)
@@ -189,18 +189,18 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
 	/* Add Peer Link Management element */
 	switch (action) {
 	case PLINK_OPEN:
-		ie_len = 3;
+		ie_len = 6;
 		break;
 	case PLINK_CONFIRM:
-		ie_len = 5;
+		ie_len = 8;
 		include_plid = true;
 		break;
 	case PLINK_CLOSE:
 	default:
 		if (!plid)
-			ie_len = 5;
+			ie_len = 8;
 		else {
-			ie_len = 7;
+			ie_len = 10;
 			include_plid = true;
 		}
 		break;
@@ -209,7 +209,8 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
 	pos = skb_put(skb, 2 + ie_len);
 	*pos++ = WLAN_EID_PEER_LINK;
 	*pos++ = ie_len;
-	*pos++ = action;
+	memcpy(pos, meshpeeringproto, sizeof(meshpeeringproto));
+	pos += 4;
 	memcpy(pos, &llid, 2);
 	if (include_plid) {
 		pos += 2;
@@ -419,12 +420,13 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 		return;
 	}
 
-	ftype = *((u8 *)PLINK_GET_FRAME_SUBTYPE(elems.peer_link));
+	ftype = mgmt->u.action.u.plink_action.action_code;
 	ie_len = elems.peer_link_len;
-	if ((ftype == PLINK_OPEN && ie_len != 3) ||
-	    (ftype == PLINK_CONFIRM && ie_len != 5) ||
-	    (ftype == PLINK_CLOSE && ie_len != 5 && ie_len != 7)) {
-		mpl_dbg("Mesh plink: incorrect plink ie length\n");
+	if ((ftype == PLINK_OPEN && ie_len != 6) ||
+	    (ftype == PLINK_CONFIRM && ie_len != 8) ||
+	    (ftype == PLINK_CLOSE && ie_len != 8 && ie_len != 10)) {
+		mpl_dbg("Mesh plink: incorrect plink ie length %d %d\n",
+		    ftype, ie_len);
 		return;
 	}
 
@@ -436,7 +438,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 	 * from the point of view of this host.
 	 */
 	memcpy(&plid, PLINK_GET_LLID(elems.peer_link), 2);
-	if (ftype == PLINK_CONFIRM || (ftype == PLINK_CLOSE && ie_len == 7))
+	if (ftype == PLINK_CONFIRM || (ftype == PLINK_CLOSE && ie_len == 10))
 		memcpy(&llid, PLINK_GET_PLID(elems.peer_link), 2);
 
 	rcu_read_lock();
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index c06496f..2cddd02 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -507,7 +507,7 @@ ieee80211_rx_mesh_check(struct ieee80211_rx_data *rx)
 
 		if (ieee80211_is_action(hdr->frame_control)) {
 			mgmt = (struct ieee80211_mgmt *)hdr;
-			if (mgmt->u.action.category != PLINK_CATEGORY)
+			if (mgmt->u.action.category != MESH_PLINK_CATEGORY)
 				return RX_DROP_MONITOR;
 			return RX_CONTINUE;
 		}
-- 
1.5.6.5

[PATCH v2 06/20] mac80211: update the format of path selection frames

[Rui Paulo]

Update the format of path selection frames according to latest
draft (3.03).

Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
---
 net/mac80211/mesh.h      |    1 +
 net/mac80211/mesh_hwmp.c |    2 +-
 2 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index 536d5c0..2fd3e20 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -208,6 +208,7 @@ struct mesh_rmc {
 /* Pending ANA approval */
 #define MESH_PLINK_CATEGORY	30
 #define MESH_PATH_SEL_CATEGORY	32
+#define MESH_PATH_SEL_ACTION	0
 
 /* Public interfaces */
 /* Various */
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 29b82e9..c291cdb 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -105,7 +105,7 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags,
 	memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
 	/* BSSID is left zeroed, wildcard value */
 	mgmt->u.action.category = MESH_PATH_SEL_CATEGORY;
-	mgmt->u.action.u.mesh_action.action_code = action;
+	mgmt->u.action.u.mesh_action.action_code = MESH_PATH_SEL_ACTION;
 
 	switch (action) {
 	case MPATH_PREQ:
-- 
1.5.6.5

[PATCH v2 07/20] mac80211: add MAC80211_VERBOSE_MHWMP_DEBUG

[Rui Paulo]

Add MAC80211_VERBOSE_MHWMP_DEBUG, a debugging option for HWMP
frame processing.

Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
---
 net/mac80211/Kconfig     |   13 +++++++++++++
 net/mac80211/mesh_hwmp.c |   19 +++++++++++++++----
 2 files changed, 28 insertions(+), 4 deletions(-)

diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index 4d5543a..a10d508 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -194,6 +194,19 @@ config MAC80211_VERBOSE_MPL_DEBUG
 
 	  Do not select this option.
 
+config MAC80211_VERBOSE_MHWMP_DEBUG
+	bool "Verbose mesh HWMP routing debugging"
+	depends on MAC80211_DEBUG_MENU
+	depends on MAC80211_MESH
+	---help---
+	  Selecting this option causes mac80211 to print out very
+	  verbose mesh routing (HWMP) debugging messages (when mac80211
+	  is taking part in a mesh network).
+	  It should not be selected on production systems as those
+	  messages are remotely triggerable.
+
+	  Do not select this option.
+
 config MAC80211_DEBUG_COUNTERS
 	bool "Extra statistics for TX/RX debugging"
 	depends on MAC80211_DEBUG_MENU
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index c291cdb..6dbaec5 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -9,6 +9,12 @@
 
 #include "mesh.h"
 
+#ifdef CONFIG_MAC80211_VERBOSE_MHWMP_DEBUG
+#define mhwmp_dbg(fmt, args...)   printk(KERN_DEBUG "Mesh HWMP: " fmt, ##args)
+#else
+#define mhwmp_dbg(fmt, args...)   do { (void)(0); } while (0)
+#endif
+
 #define TEST_FRAME_LEN	8192
 #define MAX_METRIC	0xffffffff
 #define ARITH_SHIFT	8
@@ -109,11 +115,13 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags,
 
 	switch (action) {
 	case MPATH_PREQ:
+		mhwmp_dbg("sending PREQ\n");
 		ie_len = 37;
 		pos = skb_put(skb, 2 + ie_len);
 		*pos++ = WLAN_EID_PREQ;
 		break;
 	case MPATH_PREP:
+		mhwmp_dbg("sending PREP\n");
 		ie_len = 31;
 		pos = skb_put(skb, 2 + ie_len);
 		*pos++ = WLAN_EID_PREP;
@@ -432,6 +440,8 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
 	orig_dsn = PREQ_IE_ORIG_DSN(preq_elem);
 	dst_flags = PREQ_IE_DST_F(preq_elem);
 
+	mhwmp_dbg("received PREQ\n");
+
 	if (memcmp(dst_addr, sdata->dev->dev_addr, ETH_ALEN) == 0) {
 		forward = false;
 		reply = true;
@@ -467,13 +477,14 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
 	if (reply) {
 		lifetime = PREQ_IE_LIFETIME(preq_elem);
 		ttl = ifmsh->mshcfg.dot11MeshTTL;
-		if (ttl != 0)
+		if (ttl != 0) {
+			mhwmp_dbg("replying to the PREQ\n");
 			mesh_path_sel_frame_tx(MPATH_PREP, 0, dst_addr,
 				cpu_to_le32(dst_dsn), 0, orig_addr,
 				cpu_to_le32(orig_dsn), mgmt->sa, 0, ttl,
 				cpu_to_le32(lifetime), cpu_to_le32(metric),
 				0, sdata);
-		else
+		} else
 			ifmsh->mshstats.dropped_frames_ttl++;
 	}
 
@@ -661,7 +672,7 @@ static void mesh_queue_preq(struct mesh_path *mpath, u8 flags)
 
 	preq_node = kmalloc(sizeof(struct mesh_preq_queue), GFP_ATOMIC);
 	if (!preq_node) {
-		printk(KERN_DEBUG "Mesh HWMP: could not allocate PREQ node\n");
+		mhwmp_dbg("could not allocate PREQ node\n");
 		return;
 	}
 
@@ -670,7 +681,7 @@ static void mesh_queue_preq(struct mesh_path *mpath, u8 flags)
 		spin_unlock(&ifmsh->mesh_preq_queue_lock);
 		kfree(preq_node);
 		if (printk_ratelimit())
-			printk(KERN_DEBUG "Mesh HWMP: PREQ node queue full\n");
+			mhwmp_dbg("PREQ node queue full\n");
 		return;
 	}
 
-- 
1.5.6.5

[PATCH v2 08/20] mac80211: allow processing of more than one HWMP IE

[Rui Paulo]

Since the HWMP IEs are now all optional and the action code is fixed,
allow the HWMP code to find and process each IE on the path
selection action frames.

Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: Javier Cardona <rpaulo@cozybit.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
---
 net/mac80211/mesh_hwmp.c |   47 ++++++++++++++++++++++++---------------------
 1 files changed, 25 insertions(+), 22 deletions(-)

diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 6dbaec5..e67e812 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -192,7 +192,7 @@ int mesh_path_error_tx(u8 *dst, __le32 dst_dsn, u8 *ra,
 	memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
 	/* BSSID is left zeroed, wildcard value */
 	mgmt->u.action.category = MESH_PATH_SEL_CATEGORY;
-	mgmt->u.action.u.mesh_action.action_code = MPATH_PERR;
+	mgmt->u.action.u.mesh_action.action_code = MESH_PATH_SEL_ACTION;
 	ie_len = 12;
 	pos = skb_put(skb, 2 + ie_len);
 	*pos++ = WLAN_EID_PERR;
@@ -277,7 +277,7 @@ static u32 airtime_link_metric_get(struct ieee80211_local *local,
  */
 static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata,
 			    struct ieee80211_mgmt *mgmt,
-			    u8 *hwmp_ie)
+			    u8 *hwmp_ie, enum mpath_frame_type action)
 {
 	struct ieee80211_local *local = sdata->local;
 	struct mesh_path *mpath;
@@ -288,7 +288,6 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata,
 	unsigned long orig_lifetime, exp_time;
 	u32 last_hop_metric, new_metric;
 	bool process = true;
-	u8 action = mgmt->u.action.u.mesh_action.action_code;
 
 	rcu_read_lock();
 	sta = sta_info_get(local, mgmt->sa);
@@ -443,6 +442,7 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
 	mhwmp_dbg("received PREQ\n");
 
 	if (memcmp(dst_addr, sdata->dev->dev_addr, ETH_ALEN) == 0) {
+		mhwmp_dbg("PREQ is for us\n");
 		forward = false;
 		reply = true;
 		metric = 0;
@@ -498,6 +498,7 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
 			ifmsh->mshstats.dropped_frames_ttl++;
 			return;
 		}
+		mhwmp_dbg("forwarding the PREQ\n");
 		--ttl;
 		flags = PREQ_IE_FLAGS(preq_elem);
 		preq_id = PREQ_IE_PREQ_ID(preq_elem);
@@ -524,6 +525,8 @@ static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata,
 	u8 next_hop[ETH_ALEN];
 	u32 dst_dsn, orig_dsn, lifetime;
 
+	mhwmp_dbg("received PREP\n");
+
 	/* Note that we divert from the draft nomenclature and denominate
 	 * destination to what the draft refers to as origininator. So in this
 	 * function destnation refers to the final destination of the PREP,
@@ -625,32 +628,32 @@ void mesh_rx_path_sel_frame(struct ieee80211_sub_if_data *sdata,
 	ieee802_11_parse_elems(mgmt->u.action.u.mesh_action.variable,
 			len - baselen, &elems);
 
-	switch (mgmt->u.action.u.mesh_action.action_code) {
-	case MPATH_PREQ:
-		if (!elems.preq || elems.preq_len != 37)
+	mhwmp_dbg("RX path selection frame\n");
+	if (elems.preq) {
+		if (elems.preq_len != 37)
 			/* Right now we support just 1 destination and no AE */
 			return;
-		last_hop_metric = hwmp_route_info_get(sdata, mgmt, elems.preq);
-		if (!last_hop_metric)
-			return;
-		hwmp_preq_frame_process(sdata, mgmt, elems.preq, last_hop_metric);
-		break;
-	case MPATH_PREP:
-		if (!elems.prep || elems.prep_len != 31)
+		last_hop_metric = hwmp_route_info_get(sdata, mgmt, elems.preq,
+						      MPATH_PREQ);
+		if (last_hop_metric)
+			hwmp_preq_frame_process(sdata, mgmt, elems.preq,
+						last_hop_metric);
+	}
+	if (elems.prep) {
+		if (elems.prep_len != 31)
 			/* Right now we support no AE */
 			return;
-		last_hop_metric = hwmp_route_info_get(sdata, mgmt, elems.prep);
-		if (!last_hop_metric)
-			return;
-		hwmp_prep_frame_process(sdata, mgmt, elems.prep, last_hop_metric);
-		break;
-	case MPATH_PERR:
-		if (!elems.perr || elems.perr_len != 12)
+		last_hop_metric = hwmp_route_info_get(sdata, mgmt, elems.prep,
+						      MPATH_PREP);
+		if (last_hop_metric)
+			hwmp_prep_frame_process(sdata, mgmt, elems.prep,
+						last_hop_metric);
+	}
+	if (elems.perr) {
+		if (elems.perr_len != 12)
 			/* Right now we support only one destination per PERR */
 			return;
 		hwmp_perr_frame_process(sdata, mgmt, elems.perr);
-	default:
-		return;
 	}
 
 }
-- 
1.5.6.5

[PATCH v2 09/20] mac80211: improve HWMP debugging

[Rui Paulo]

Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
---
 net/mac80211/mesh_hwmp.c |   11 +++++------
 1 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index e67e812..db1a330 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -115,13 +115,13 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags,
 
 	switch (action) {
 	case MPATH_PREQ:
-		mhwmp_dbg("sending PREQ\n");
+		mhwmp_dbg("sending PREQ to %pM\n", dst);
 		ie_len = 37;
 		pos = skb_put(skb, 2 + ie_len);
 		*pos++ = WLAN_EID_PREQ;
 		break;
 	case MPATH_PREP:
-		mhwmp_dbg("sending PREP\n");
+		mhwmp_dbg("sending PREP to %pM\n", dst);
 		ie_len = 31;
 		pos = skb_put(skb, 2 + ie_len);
 		*pos++ = WLAN_EID_PREP;
@@ -439,7 +439,7 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
 	orig_dsn = PREQ_IE_ORIG_DSN(preq_elem);
 	dst_flags = PREQ_IE_DST_F(preq_elem);
 
-	mhwmp_dbg("received PREQ\n");
+	mhwmp_dbg("received PREQ from %pM\n", orig_addr);
 
 	if (memcmp(dst_addr, sdata->dev->dev_addr, ETH_ALEN) == 0) {
 		mhwmp_dbg("PREQ is for us\n");
@@ -498,7 +498,7 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
 			ifmsh->mshstats.dropped_frames_ttl++;
 			return;
 		}
-		mhwmp_dbg("forwarding the PREQ\n");
+		mhwmp_dbg("forwarding the PREQ from %pM\n", orig_addr);
 		--ttl;
 		flags = PREQ_IE_FLAGS(preq_elem);
 		preq_id = PREQ_IE_PREQ_ID(preq_elem);
@@ -525,7 +525,7 @@ static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata,
 	u8 next_hop[ETH_ALEN];
 	u32 dst_dsn, orig_dsn, lifetime;
 
-	mhwmp_dbg("received PREP\n");
+	mhwmp_dbg("received PREP from %pM\n", PREP_IE_ORIG_ADDR(prep_elem));
 
 	/* Note that we divert from the draft nomenclature and denominate
 	 * destination to what the draft refers to as origininator. So in this
@@ -628,7 +628,6 @@ void mesh_rx_path_sel_frame(struct ieee80211_sub_if_data *sdata,
 	ieee802_11_parse_elems(mgmt->u.action.u.mesh_action.variable,
 			len - baselen, &elems);
 
-	mhwmp_dbg("RX path selection frame\n");
 	if (elems.preq) {
 		if (elems.preq_len != 37)
 			/* Right now we support just 1 destination and no AE */
-- 
1.5.6.5

[PATCH v2 10/20] mac80211: improve peer link management debugging

[Rui Paulo]

Print the FSM state strings instead of just the numbers.

Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
---
 net/mac80211/mesh_plink.c |   15 +++++++++++++--
 1 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 8a54bc8..cf12f61 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -398,6 +398,17 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 	u8 ie_len;
 	u8 *baseaddr;
 	__le16 plid, llid, reason;
+#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
+	static const char *mplstates[] = {
+		[PLINK_LISTEN] = "LISTEN",
+		[PLINK_OPN_SNT] = "OPN-SNT",
+		[PLINK_OPN_RCVD] = "OPN-RCVD",
+		[PLINK_CNF_RCVD] = "CNF_RCVD",
+		[PLINK_ESTAB] = "ESTAB",
+		[PLINK_HOLDING] = "HOLDING",
+		[PLINK_BLOCKED] = "BLOCKED"
+	};
+#endif
 
 	/* need action_code, aux */
 	if (len < IEEE80211_MIN_ACTION_SIZE + 3)
@@ -536,8 +547,8 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 		}
 	}
 
-	mpl_dbg("Mesh plink (peer, state, llid, plid, event): %pM %d %d %d %d\n",
-		mgmt->sa, sta->plink_state,
+	mpl_dbg("Mesh plink (peer, state, llid, plid, event): %pM %s %d %d %d\n",
+		mgmt->sa, mplstates[sta->plink_state],
 		le16_to_cpu(sta->llid), le16_to_cpu(sta->plid),
 		event);
 	reason = 0;
-- 
1.5.6.5

[PATCH v2 11/20] mac80211: implement RANN processing and forwarding

[Rui Paulo]

Process the RANN (Root Annoucement) Frame and try to find the HWMP
root station by sending a PREQ.

Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
---
 include/linux/ieee80211.h  |   15 ++++++++
 net/mac80211/ieee80211_i.h |    2 +
 net/mac80211/mesh_hwmp.c   |   79 +++++++++++++++++++++++++++++++++++++++----
 net/mac80211/util.c        |    6 +++
 4 files changed, 94 insertions(+), 8 deletions(-)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 50c684d..49b1abd 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -554,6 +554,20 @@ struct ieee80211_tim_ie {
 	u8 virtual_map[1];
 } __attribute__ ((packed));
 
+/**
+ * struct ieee80211_rann_ie
+ *
+ * This structure refers to "Root Announcement information element"
+ */
+struct ieee80211_rann_ie {
+	u8 rann_flags;
+	u8 rann_hopcount;
+	u8 rann_ttl;
+	u8 rann_addr[6];
+	u32 rann_seq;
+	u32 rann_metric;
+} __attribute__ ((packed));
+
 #define WLAN_SA_QUERY_TR_ID_LEN 2
 
 struct ieee80211_mgmt {
@@ -1070,6 +1084,7 @@ enum ieee80211_eid {
 	WLAN_EID_PREQ = 68,
 	WLAN_EID_PREP = 69,
 	WLAN_EID_PERR = 70,
+	WLAN_EID_RANN = 49,	/* compatible with FreeBSD */
 	/* 802.11h */
 	WLAN_EID_PWR_CONSTRAINT = 32,
 	WLAN_EID_PWR_CAPABILITY = 33,
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 1f4f88a..8c54702 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -799,6 +799,7 @@ struct ieee802_11_elems {
 	u8 *preq;
 	u8 *prep;
 	u8 *perr;
+	struct ieee80211_rann_ie *rann;
 	u8 *ch_switch_elem;
 	u8 *country_elem;
 	u8 *pwr_constr_elem;
@@ -826,6 +827,7 @@ struct ieee802_11_elems {
 	u8 preq_len;
 	u8 prep_len;
 	u8 perr_len;
+	u8 rann_len;
 	u8 ch_switch_elem_len;
 	u8 country_elem_len;
 	u8 pwr_constr_elem_len;
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index db1a330..555bd5a 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -28,6 +28,8 @@
 /* Reply and forward */
 #define MP_F_RF	0x2
 
+static void mesh_queue_preq(struct mesh_path *, u8);
+
 static inline u32 u32_field_get(u8 *preq_elem, int offset, bool ae)
 {
 	if (ae)
@@ -81,7 +83,8 @@ static inline u32 u32_field_get(u8 *preq_elem, int offset, bool ae)
 enum mpath_frame_type {
 	MPATH_PREQ = 0,
 	MPATH_PREP,
-	MPATH_PERR
+	MPATH_PERR,
+	MPATH_RANN
 };
 
 static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags,
@@ -109,7 +112,8 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags,
 
 	memcpy(mgmt->da, da, ETH_ALEN);
 	memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
-	/* BSSID is left zeroed, wildcard value */
+	/* BSSID == SA */
+	memcpy(mgmt->bssid, sdata->dev->dev_addr, ETH_ALEN);
 	mgmt->u.action.category = MESH_PATH_SEL_CATEGORY;
 	mgmt->u.action.u.mesh_action.action_code = MESH_PATH_SEL_ACTION;
 
@@ -126,6 +130,12 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags,
 		pos = skb_put(skb, 2 + ie_len);
 		*pos++ = WLAN_EID_PREP;
 		break;
+	case MPATH_RANN:
+		mhwmp_dbg("sending RANN from %pM\n", orig_addr);
+		ie_len = 17;
+		pos = skb_put(skb, 2 + ie_len);
+		*pos++ = WLAN_EID_RANN;
+		break;
 	default:
 		kfree_skb(skb);
 		return -ENOTSUPP;
@@ -143,8 +153,10 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags,
 	pos += ETH_ALEN;
 	memcpy(pos, &orig_dsn, 4);
 	pos += 4;
-	memcpy(pos, &lifetime, 4);
-	pos += 4;
+	if (action != MPATH_RANN) {
+		memcpy(pos, &lifetime, 4);
+		pos += 4;
+	}
 	memcpy(pos, &metric, 4);
 	pos += 4;
 	if (action == MPATH_PREQ) {
@@ -152,9 +164,11 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags,
 		*pos++ = 1;
 		*pos++ = dst_flags;
 	}
-	memcpy(pos, dst, ETH_ALEN);
-	pos += ETH_ALEN;
-	memcpy(pos, &dst_dsn, 4);
+	if (action != MPATH_RANN) {
+		memcpy(pos, dst, ETH_ALEN);
+		pos += ETH_ALEN;
+		memcpy(pos, &dst_dsn, 4);
+	}
 
 	ieee80211_tx_skb(sdata, skb, 1);
 	return 0;
@@ -610,6 +624,54 @@ static void hwmp_perr_frame_process(struct ieee80211_sub_if_data *sdata,
 	rcu_read_unlock();
 }
 
+static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata,
+				struct ieee80211_mgmt *mgmt,
+				struct ieee80211_rann_ie *rann)
+{
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+	struct mesh_path *mpath;
+	u8 *ta;
+	u8 ttl, flags, hopcount;
+	u8 *orig_addr;
+	u32 orig_dsn, metric;
+
+	ta = mgmt->sa;
+	ttl = rann->rann_ttl;
+	if (ttl <= 1) {
+		ifmsh->mshstats.dropped_frames_ttl++;
+		return;
+	}
+	ttl--;
+	flags = rann->rann_flags;
+	orig_addr = rann->rann_addr;
+	orig_dsn = rann->rann_seq;
+	hopcount = rann->rann_hopcount;
+	metric = rann->rann_metric;
+	mhwmp_dbg("received RANN from %pM\n", orig_addr);
+
+	rcu_read_lock();
+	mpath = mesh_path_lookup(orig_addr, sdata);
+	if (!mpath) {
+		mesh_path_add(orig_addr, sdata);
+		mpath = mesh_path_lookup(orig_addr, sdata);
+		if (!mpath) {
+			rcu_read_unlock();
+			sdata->u.mesh.mshstats.dropped_frames_no_route++;
+			return;
+		}
+		mesh_queue_preq(mpath,
+				PREQ_Q_F_START | PREQ_Q_F_REFRESH);
+	}
+	if (mpath->dsn < orig_dsn) {
+		mesh_path_sel_frame_tx(MPATH_RANN, flags, orig_addr,
+				       cpu_to_le32(orig_dsn),
+				       0, NULL, 0, sdata->dev->broadcast,
+				       hopcount, ttl, 0, cpu_to_le32(metric),
+				       0, sdata);
+		mpath->dsn = orig_dsn;
+	}
+	rcu_read_unlock();
+}
 
 
 void mesh_rx_path_sel_frame(struct ieee80211_sub_if_data *sdata,
@@ -654,7 +716,8 @@ void mesh_rx_path_sel_frame(struct ieee80211_sub_if_data *sdata,
 			return;
 		hwmp_perr_frame_process(sdata, mgmt, elems.perr);
 	}
-
+	if (elems.rann)
+		hwmp_rann_frame_process(sdata, mgmt, elems.rann);
 }
 
 /**
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index aedbaaa..679c347 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -685,6 +685,12 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len,
 			elems->perr = pos;
 			elems->perr_len = elen;
 			break;
+		case WLAN_EID_RANN:
+			if (elen >= sizeof(struct ieee80211_rann_ie)) {
+				elems->rann = (void *)pos;
+				elems->rann_len = elen;
+			}
+			break;
 		case WLAN_EID_CHANNEL_SWITCH:
 			elems->ch_switch_elem = pos;
 			elems->ch_switch_elem_len = elen;
-- 
1.5.6.5

[PATCH v2 12/20] mac80211: update PERR frame format

[Rui Paulo]

Update the PERR IE frame format according to latest draft (3.03).

Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
---
 net/mac80211/mesh.h         |    9 +++++-
 net/mac80211/mesh_hwmp.c    |   58 ++++++++++++++++++++++++++++++++++++------
 net/mac80211/mesh_pathtbl.c |    6 +++-
 3 files changed, 60 insertions(+), 13 deletions(-)

diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index 2fd3e20..1d534c7 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -210,6 +210,11 @@ struct mesh_rmc {
 #define MESH_PATH_SEL_CATEGORY	32
 #define MESH_PATH_SEL_ACTION	0
 
+/* PERR reason codes */
+#define PEER_RCODE_UNSPECIFIED  11
+#define PERR_RCODE_NO_ROUTE     12
+#define PERR_RCODE_DEST_UNREACH 13
+
 /* Public interfaces */
 /* Various */
 int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc,
@@ -275,8 +280,8 @@ void mesh_mpp_table_grow(void);
 u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata,
 		struct mesh_table *tbl);
 /* Mesh paths */
-int mesh_path_error_tx(u8 *dest, __le32 dest_dsn, u8 *ra,
-		struct ieee80211_sub_if_data *sdata);
+int mesh_path_error_tx(u8 ttl, u8 *dest, __le32 dest_dsn, __le16 dest_rcode,
+		u8 *ra, struct ieee80211_sub_if_data *sdata);
 void mesh_path_assign_nexthop(struct mesh_path *mpath, struct sta_info *sta);
 void mesh_path_flush_pending(struct mesh_path *mpath);
 void mesh_path_tx_pending(struct mesh_path *mpath);
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 555bd5a..c12cf5a 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -27,6 +27,10 @@
 #define MP_F_DO	0x1
 /* Reply and forward */
 #define MP_F_RF	0x2
+/* Unknown Sequence Number */
+#define MP_F_USN    0x01
+/* Reason code Present */
+#define MP_F_RCODE  0x02
 
 static void mesh_queue_preq(struct mesh_path *, u8);
 
@@ -37,6 +41,13 @@ static inline u32 u32_field_get(u8 *preq_elem, int offset, bool ae)
 	return get_unaligned_le32(preq_elem + offset);
 }
 
+static inline u32 u16_field_get(u8 *preq_elem, int offset, bool ae)
+{
+	if (ae)
+		offset += 6;
+	return get_unaligned_le16(preq_elem + offset);
+}
+
 /* HWMP IE processing macros */
 #define AE_F			(1<<6)
 #define AE_F_SET(x)		(*x & AE_F)
@@ -63,8 +74,11 @@ static inline u32 u32_field_get(u8 *preq_elem, int offset, bool ae)
 #define PREP_IE_DST_ADDR(x)	(AE_F_SET(x) ? x + 27 : x + 21)
 #define PREP_IE_DST_DSN(x)	u32_field_get(x, 27, AE_F_SET(x));
 
-#define PERR_IE_DST_ADDR(x)	(x + 2)
-#define PERR_IE_DST_DSN(x)	u32_field_get(x, 8, 0);
+#define PERR_IE_TTL(x)		(*(x))
+#define PERR_IE_DST_FLAGS(x)	(*(x + 2))
+#define PERR_IE_DST_ADDR(x)	(x + 3)
+#define PERR_IE_DST_DSN(x)	u32_field_get(x, 9, 0);
+#define PERR_IE_DST_RCODE(x)	u16_field_get(x, 13, 0);
 
 #define MSEC_TO_TU(x) (x*1000/1024)
 #define DSN_GT(x, y) ((long) (y) - (long) (x) < 0)
@@ -181,8 +195,8 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags,
  * @dst_dsn: dsn of the broken destination
  * @ra: node this frame is addressed to
  */
-int mesh_path_error_tx(u8 *dst, __le32 dst_dsn, u8 *ra,
-		struct ieee80211_sub_if_data *sdata)
+int mesh_path_error_tx(u8 ttl, u8 *dst, __le32 dst_dsn, __le16 dst_rcode,
+		u8 *ra, struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_local *local = sdata->local;
 	struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
@@ -207,17 +221,29 @@ int mesh_path_error_tx(u8 *dst, __le32 dst_dsn, u8 *ra,
 	/* BSSID is left zeroed, wildcard value */
 	mgmt->u.action.category = MESH_PATH_SEL_CATEGORY;
 	mgmt->u.action.u.mesh_action.action_code = MESH_PATH_SEL_ACTION;
-	ie_len = 12;
+	ie_len = 15;
 	pos = skb_put(skb, 2 + ie_len);
 	*pos++ = WLAN_EID_PERR;
 	*pos++ = ie_len;
-	/* mode flags, reserved */
-	*pos++ = 0;
+	/* ttl */
+	*pos++ = MESH_TTL;
 	/* number of destinations */
 	*pos++ = 1;
+	/*
+	 * flags bit, bit 1 is unset if we know the sequence number and
+	 * bit 2 is set if we have a reason code
+	 */
+	*pos = 0;
+	if (!dst_dsn)
+		*pos |= MP_F_USN;
+	if (dst_rcode)
+		*pos |= MP_F_RCODE;
+	pos++;
 	memcpy(pos, dst, ETH_ALEN);
 	pos += ETH_ALEN;
 	memcpy(pos, &dst_dsn, 4);
+	pos += 4;
+	memcpy(pos, &dst_rcode, 2);
 
 	ieee80211_tx_skb(sdata, skb, 1);
 	return 0;
@@ -598,13 +624,26 @@ fail:
 static void hwmp_perr_frame_process(struct ieee80211_sub_if_data *sdata,
 			     struct ieee80211_mgmt *mgmt, u8 *perr_elem)
 {
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 	struct mesh_path *mpath;
+	u8 ttl;
 	u8 *ta, *dst_addr;
+	u8 dst_flags;
 	u32 dst_dsn;
+	u16 dst_rcode;
 
 	ta = mgmt->sa;
+	ttl = PERR_IE_TTL(perr_elem);
+	if (ttl <= 1) {
+		ifmsh->mshstats.dropped_frames_ttl++;
+		return;
+	}
+	ttl--;
+	dst_flags = PERR_IE_DST_FLAGS(perr_elem);
 	dst_addr = PERR_IE_DST_ADDR(perr_elem);
 	dst_dsn = PERR_IE_DST_DSN(perr_elem);
+	dst_rcode = PERR_IE_DST_RCODE(perr_elem);
+
 	rcu_read_lock();
 	mpath = mesh_path_lookup(dst_addr, sdata);
 	if (mpath) {
@@ -616,7 +655,8 @@ static void hwmp_perr_frame_process(struct ieee80211_sub_if_data *sdata,
 			mpath->flags &= ~MESH_PATH_ACTIVE;
 			mpath->dsn = dst_dsn;
 			spin_unlock_bh(&mpath->state_lock);
-			mesh_path_error_tx(dst_addr, cpu_to_le32(dst_dsn),
+			mesh_path_error_tx(ttl, dst_addr, cpu_to_le32(dst_dsn),
+					   cpu_to_le16(dst_rcode),
 					   sdata->dev->broadcast, sdata);
 		} else
 			spin_unlock_bh(&mpath->state_lock);
@@ -711,7 +751,7 @@ void mesh_rx_path_sel_frame(struct ieee80211_sub_if_data *sdata,
 						last_hop_metric);
 	}
 	if (elems.perr) {
-		if (elems.perr_len != 12)
+		if (elems.perr_len != 15)
 			/* Right now we support only one destination per PERR */
 			return;
 		hwmp_perr_frame_process(sdata, mgmt, elems.perr);
diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index 751c4d0..5d54123 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -465,8 +465,9 @@ void mesh_plink_broken(struct sta_info *sta)
 			mpath->flags &= ~MESH_PATH_ACTIVE;
 			++mpath->dsn;
 			spin_unlock_bh(&mpath->state_lock);
-			mesh_path_error_tx(mpath->dst,
+			mesh_path_error_tx(MESH_TTL, mpath->dst,
 					cpu_to_le32(mpath->dsn),
+					PERR_RCODE_DEST_UNREACH,
 					sdata->dev->broadcast, sdata);
 		} else
 		spin_unlock_bh(&mpath->state_lock);
@@ -611,7 +612,8 @@ void mesh_path_discard_frame(struct sk_buff *skb,
 		mpath = mesh_path_lookup(da, sdata);
 		if (mpath)
 			dsn = ++mpath->dsn;
-		mesh_path_error_tx(skb->data, cpu_to_le32(dsn), ra, sdata);
+		mesh_path_error_tx(MESH_TTL, skb->data, cpu_to_le32(dsn),
+				   PERR_RCODE_NO_ROUTE, ra, sdata);
 	}
 
 	kfree_skb(skb);
-- 
1.5.6.5

[PATCH v2 13/20] mac80211: properly forward the RANN IE

[Rui Paulo]

Increase hopcount and convert metric to LE before forwarding the RANN
action frame.

Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
---
 net/mac80211/mesh_hwmp.c |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index c12cf5a..355099f 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -686,6 +686,7 @@ static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata,
 	orig_addr = rann->rann_addr;
 	orig_dsn = rann->rann_seq;
 	hopcount = rann->rann_hopcount;
+	hopcount++;
 	metric = rann->rann_metric;
 	mhwmp_dbg("received RANN from %pM\n", orig_addr);
 
@@ -706,7 +707,8 @@ static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata,
 		mesh_path_sel_frame_tx(MPATH_RANN, flags, orig_addr,
 				       cpu_to_le32(orig_dsn),
 				       0, NULL, 0, sdata->dev->broadcast,
-				       hopcount, ttl, 0, cpu_to_le32(metric),
+				       hopcount, ttl, 0,
+				       cpu_to_le32(metric + mpath->metric),
 				       0, sdata);
 		mpath->dsn = orig_dsn;
 	}
-- 
1.5.6.5

[PATCH v2 14/20] mac80211: set the AID field correctly for mesh peer frames

[Rui Paulo]

This sets the AID field correctly for mesh peer confirm frames.

Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
---
 net/mac80211/mesh_plink.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index cf12f61..ec68d20 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -181,7 +181,8 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
 		if (action == PLINK_CONFIRM) {
 			pos = skb_put(skb, 4);
 			/* two-byte status code followed by two-byte AID */
-			memset(pos, 0, 4);
+			memset(pos, 0, 2);
+			memcpy(pos + 2, &plid, 2);
 		}
 		mesh_mgmt_ies_add(skb, sdata);
 	}
-- 
1.5.6.5

[PATCH v2 15/20] mac80211: fix BSSID setup for beacon frames

[Rui Paulo]

BSSID is now set to the TA.

Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
---
 net/mac80211/tx.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index c7dc8cc..e7d56a5 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2114,7 +2114,7 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
 		    cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON);
 		memset(mgmt->da, 0xff, ETH_ALEN);
 		memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
-		/* BSSID is left zeroed, wildcard value */
+		memcpy(mgmt->bssid, sdata->dev->dev_addr, ETH_ALEN);
 		mgmt->u.beacon.beacon_int =
 			cpu_to_le16(sdata->vif.bss_conf.beacon_int);
 		mgmt->u.beacon.capab_info = 0x0; /* 0x0 for MPs */
-- 
1.5.6.5

[PATCH v2 16/20] mac80211: add the DS params to the beacon

[Rui Paulo]

Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
---
 net/mac80211/mesh.c |    7 +++++++
 1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 63427d9..222a313 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -247,6 +247,13 @@ void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
 		}
 	}
 
+	if (sband->band == IEEE80211_BAND_2GHZ) {
+		pos = skb_put(skb, 2 + 1);
+		*pos++ = WLAN_EID_DS_PARAMS;
+		*pos++ = 1;
+		*pos++ = ieee80211_frequency_to_channel(local->hw.conf.channel->center_freq);
+	}
+
 	pos = skb_put(skb, 2 + sdata->u.mesh.mesh_id_len);
 	*pos++ = WLAN_EID_MESH_ID;
 	*pos++ = sdata->u.mesh.mesh_id_len;
-- 
1.5.6.5

[PATCH v2 17/20] mac80211: replace "destination" with "target" to follow the spec

[Rui Paulo]

Resulting object files have the same MD5 as before.

Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
---
 include/linux/nl80211.h     |    8 +-
 include/net/cfg80211.h      |    8 +-
 net/mac80211/cfg.c          |    8 +-
 net/mac80211/ieee80211_i.h  |   10 +-
 net/mac80211/mesh.c         |    2 +-
 net/mac80211/mesh.h         |   10 +-
 net/mac80211/mesh_hwmp.c    |  221 ++++++++++++++++++++++---------------------
 net/mac80211/mesh_pathtbl.c |   12 +-
 net/wireless/nl80211.c      |    6 +-
 9 files changed, 144 insertions(+), 141 deletions(-)

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 50afca3..f682911 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -895,14 +895,14 @@ enum nl80211_sta_info {
  *
  * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
  * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
- * @NL80211_MPATH_FLAG_DSN_VALID: the mesh path contains a valid DSN
+ * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN
  * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
  * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
  */
 enum nl80211_mpath_flags {
 	NL80211_MPATH_FLAG_ACTIVE =	1<<0,
 	NL80211_MPATH_FLAG_RESOLVING =	1<<1,
-	NL80211_MPATH_FLAG_DSN_VALID =	1<<2,
+	NL80211_MPATH_FLAG_SN_VALID =	1<<2,
 	NL80211_MPATH_FLAG_FIXED =	1<<3,
 	NL80211_MPATH_FLAG_RESOLVED =	1<<4,
 };
@@ -915,7 +915,7 @@ enum nl80211_mpath_flags {
  *
  * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
  * @NL80211_ATTR_MPATH_FRAME_QLEN: number of queued frames for this destination
- * @NL80211_ATTR_MPATH_DSN: destination sequence number
+ * @NL80211_ATTR_MPATH_SN: destination sequence number
  * @NL80211_ATTR_MPATH_METRIC: metric (cost) of this mesh path
  * @NL80211_ATTR_MPATH_EXPTIME: expiration time for the path, in msec from now
  * @NL80211_ATTR_MPATH_FLAGS: mesh path flags, enumerated in
@@ -926,7 +926,7 @@ enum nl80211_mpath_flags {
 enum nl80211_mpath_info {
 	__NL80211_MPATH_INFO_INVALID,
 	NL80211_MPATH_INFO_FRAME_QLEN,
-	NL80211_MPATH_INFO_DSN,
+	NL80211_MPATH_INFO_SN,
 	NL80211_MPATH_INFO_METRIC,
 	NL80211_MPATH_INFO_EXPTIME,
 	NL80211_MPATH_INFO_FLAGS,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index ff67865..b3031bd 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -418,7 +418,7 @@ enum monitor_flags {
  * in during get_station() or dump_station().
  *
  * MPATH_INFO_FRAME_QLEN: @frame_qlen filled
- * MPATH_INFO_DSN: @dsn filled
+ * MPATH_INFO_SN: @sn filled
  * MPATH_INFO_METRIC: @metric filled
  * MPATH_INFO_EXPTIME: @exptime filled
  * MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled
@@ -427,7 +427,7 @@ enum monitor_flags {
  */
 enum mpath_info_flags {
 	MPATH_INFO_FRAME_QLEN		= BIT(0),
-	MPATH_INFO_DSN			= BIT(1),
+	MPATH_INFO_SN			= BIT(1),
 	MPATH_INFO_METRIC		= BIT(2),
 	MPATH_INFO_EXPTIME		= BIT(3),
 	MPATH_INFO_DISCOVERY_TIMEOUT	= BIT(4),
@@ -442,7 +442,7 @@ enum mpath_info_flags {
  *
  * @filled: bitfield of flags from &enum mpath_info_flags
  * @frame_qlen: number of queued frames for this destination
- * @dsn: destination sequence number
+ * @sn: target sequence number
  * @metric: metric (cost) of this mesh path
  * @exptime: expiration time for the mesh path from now, in msecs
  * @flags: mesh path flags
@@ -456,7 +456,7 @@ enum mpath_info_flags {
 struct mpath_info {
 	u32 filled;
 	u32 frame_qlen;
-	u32 dsn;
+	u32 sn;
 	u32 metric;
 	u32 exptime;
 	u32 discovery_timeout;
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 56319b5..340678e 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -907,7 +907,7 @@ static void mpath_set_pinfo(struct mesh_path *mpath, u8 *next_hop,
 	pinfo->generation = mesh_paths_generation;
 
 	pinfo->filled = MPATH_INFO_FRAME_QLEN |
-			MPATH_INFO_DSN |
+			MPATH_INFO_SN |
 			MPATH_INFO_METRIC |
 			MPATH_INFO_EXPTIME |
 			MPATH_INFO_DISCOVERY_TIMEOUT |
@@ -915,7 +915,7 @@ static void mpath_set_pinfo(struct mesh_path *mpath, u8 *next_hop,
 			MPATH_INFO_FLAGS;
 
 	pinfo->frame_qlen = mpath->frame_queue.qlen;
-	pinfo->dsn = mpath->dsn;
+	pinfo->sn = mpath->sn;
 	pinfo->metric = mpath->metric;
 	if (time_before(jiffies, mpath->exp_time))
 		pinfo->exptime = jiffies_to_msecs(mpath->exp_time - jiffies);
@@ -927,8 +927,8 @@ static void mpath_set_pinfo(struct mesh_path *mpath, u8 *next_hop,
 		pinfo->flags |= NL80211_MPATH_FLAG_ACTIVE;
 	if (mpath->flags & MESH_PATH_RESOLVING)
 		pinfo->flags |= NL80211_MPATH_FLAG_RESOLVING;
-	if (mpath->flags & MESH_PATH_DSN_VALID)
-		pinfo->flags |= NL80211_MPATH_FLAG_DSN_VALID;
+	if (mpath->flags & MESH_PATH_SN_VALID)
+		pinfo->flags |= NL80211_MPATH_FLAG_SN_VALID;
 	if (mpath->flags & MESH_PATH_FIXED)
 		pinfo->flags |= NL80211_MPATH_FLAG_FIXED;
 	if (mpath->flags & MESH_PATH_RESOLVING)
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 8c54702..4259852 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -370,14 +370,14 @@ struct ieee80211_if_mesh {
 	u8 mesh_sp_id;
 	/* Authentication Protocol Identifier */
 	u8 mesh_auth_id;
-	/* Local mesh Destination Sequence Number */
-	u32 dsn;
+	/* Local mesh Sequence Number */
+	u32 sn;
 	/* Last used PREQ ID */
 	u32 preq_id;
 	atomic_t mpaths;
-	/* Timestamp of last DSN update */
-	unsigned long last_dsn_update;
-	/* Timestamp of last DSN sent */
+	/* Timestamp of last SN update */
+	unsigned long last_sn_update;
+	/* Timestamp of last SN sent */
 	unsigned long last_preq;
 	struct mesh_rmc *rmc;
 	spinlock_t mesh_preq_queue_lock;
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 222a313..0f3e114 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -672,7 +672,7 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
 		MESH_MIN_DISCOVERY_TIMEOUT;
 	ifmsh->accepting_plinks = true;
 	ifmsh->preq_id = 0;
-	ifmsh->dsn = 0;
+	ifmsh->sn = 0;
 	atomic_set(&ifmsh->mpaths, 0);
 	mesh_rmc_init(sdata);
 	ifmsh->last_preq = jiffies;
diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index 1d534c7..ee687ad 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -26,7 +26,7 @@
  *
  * @MESH_PATH_ACTIVE: the mesh path can be used for forwarding
  * @MESH_PATH_RESOLVING: the discovery process is running for this mesh path
- * @MESH_PATH_DSN_VALID: the mesh path contains a valid destination sequence
+ * @MESH_PATH_SN_VALID: the mesh path contains a valid destination sequence
  * 	number
  * @MESH_PATH_FIXED: the mesh path has been manually set and should not be
  * 	modified
@@ -38,7 +38,7 @@
 enum mesh_path_flags {
 	MESH_PATH_ACTIVE =	BIT(0),
 	MESH_PATH_RESOLVING =	BIT(1),
-	MESH_PATH_DSN_VALID =	BIT(2),
+	MESH_PATH_SN_VALID =	BIT(2),
 	MESH_PATH_FIXED	=	BIT(3),
 	MESH_PATH_RESOLVED =	BIT(4),
 };
@@ -70,7 +70,7 @@ enum mesh_deferred_task_flags {
  * @timer: mesh path discovery timer
  * @frame_queue: pending queue for frames sent to this destination while the
  * 	path is unresolved
- * @dsn: destination sequence number of the destination
+ * @sn: target sequence number
  * @metric: current metric to this destination
  * @hop_count: hops to destination
  * @exp_time: in jiffies, when the path will expire or when it expired
@@ -94,7 +94,7 @@ struct mesh_path {
 	struct timer_list timer;
 	struct sk_buff_head frame_queue;
 	struct rcu_head rcu;
-	u32 dsn;
+	u32 sn;
 	u32 metric;
 	u8 hop_count;
 	unsigned long exp_time;
@@ -280,7 +280,7 @@ void mesh_mpp_table_grow(void);
 u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata,
 		struct mesh_table *tbl);
 /* Mesh paths */
-int mesh_path_error_tx(u8 ttl, u8 *dest, __le32 dest_dsn, __le16 dest_rcode,
+int mesh_path_error_tx(u8 ttl, u8 *target, __le32 target_sn, __le16 target_rcode,
 		u8 *ra, struct ieee80211_sub_if_data *sdata);
 void mesh_path_assign_nexthop(struct mesh_path *mpath, struct sta_info *sta);
 void mesh_path_flush_pending(struct mesh_path *mpath);
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 355099f..850c403 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -56,33 +56,33 @@ static inline u32 u16_field_get(u8 *preq_elem, int offset, bool ae)
 #define PREQ_IE_TTL(x)		(*(x + 2))
 #define PREQ_IE_PREQ_ID(x)	u32_field_get(x, 3, 0)
 #define PREQ_IE_ORIG_ADDR(x)	(x + 7)
-#define PREQ_IE_ORIG_DSN(x)	u32_field_get(x, 13, 0);
+#define PREQ_IE_ORIG_SN(x)	u32_field_get(x, 13, 0);
 #define PREQ_IE_LIFETIME(x)	u32_field_get(x, 17, AE_F_SET(x));
 #define PREQ_IE_METRIC(x) 	u32_field_get(x, 21, AE_F_SET(x));
-#define PREQ_IE_DST_F(x)	(*(AE_F_SET(x) ? x + 32 : x + 26))
-#define PREQ_IE_DST_ADDR(x) 	(AE_F_SET(x) ? x + 33 : x + 27)
-#define PREQ_IE_DST_DSN(x) 	u32_field_get(x, 33, AE_F_SET(x));
+#define PREQ_IE_TARGET_F(x)	(*(AE_F_SET(x) ? x + 32 : x + 26))
+#define PREQ_IE_TARGET_ADDR(x) 	(AE_F_SET(x) ? x + 33 : x + 27)
+#define PREQ_IE_TARGET_SN(x) 	u32_field_get(x, 33, AE_F_SET(x));
 
 
 #define PREP_IE_FLAGS(x)	PREQ_IE_FLAGS(x)
 #define PREP_IE_HOPCOUNT(x)	PREQ_IE_HOPCOUNT(x)
 #define PREP_IE_TTL(x)		PREQ_IE_TTL(x)
 #define PREP_IE_ORIG_ADDR(x)	(x + 3)
-#define PREP_IE_ORIG_DSN(x)	u32_field_get(x, 9, 0);
+#define PREP_IE_ORIG_SN(x)	u32_field_get(x, 9, 0);
 #define PREP_IE_LIFETIME(x)	u32_field_get(x, 13, AE_F_SET(x));
 #define PREP_IE_METRIC(x)	u32_field_get(x, 17, AE_F_SET(x));
-#define PREP_IE_DST_ADDR(x)	(AE_F_SET(x) ? x + 27 : x + 21)
-#define PREP_IE_DST_DSN(x)	u32_field_get(x, 27, AE_F_SET(x));
+#define PREP_IE_TARGET_ADDR(x)	(AE_F_SET(x) ? x + 27 : x + 21)
+#define PREP_IE_TARGET_SN(x)	u32_field_get(x, 27, AE_F_SET(x));
 
 #define PERR_IE_TTL(x)		(*(x))
-#define PERR_IE_DST_FLAGS(x)	(*(x + 2))
-#define PERR_IE_DST_ADDR(x)	(x + 3)
-#define PERR_IE_DST_DSN(x)	u32_field_get(x, 9, 0);
-#define PERR_IE_DST_RCODE(x)	u16_field_get(x, 13, 0);
+#define PERR_IE_TARGET_FLAGS(x)	(*(x + 2))
+#define PERR_IE_TARGET_ADDR(x)	(x + 3)
+#define PERR_IE_TARGET_SN(x)	u32_field_get(x, 9, 0);
+#define PERR_IE_TARGET_RCODE(x)	u16_field_get(x, 13, 0);
 
 #define MSEC_TO_TU(x) (x*1000/1024)
-#define DSN_GT(x, y) ((long) (y) - (long) (x) < 0)
-#define DSN_LT(x, y) ((long) (x) - (long) (y) < 0)
+#define SN_GT(x, y) ((long) (y) - (long) (x) < 0)
+#define SN_LT(x, y) ((long) (x) - (long) (y) < 0)
 
 #define net_traversal_jiffies(s) \
 	msecs_to_jiffies(s->u.mesh.mshcfg.dot11MeshHWMPnetDiameterTraversalTime)
@@ -102,9 +102,10 @@ enum mpath_frame_type {
 };
 
 static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags,
-		u8 *orig_addr, __le32 orig_dsn, u8 dst_flags, u8 *dst,
-		__le32 dst_dsn, u8 *da, u8 hop_count, u8 ttl, __le32 lifetime,
-		__le32 metric, __le32 preq_id, struct ieee80211_sub_if_data *sdata)
+		u8 *orig_addr, __le32 orig_sn, u8 target_flags, u8 *target,
+		__le32 target_sn, u8 *da, u8 hop_count, u8 ttl,__le32 lifetime,
+		__le32 metric, __le32 preq_id,
+		struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_local *local = sdata->local;
 	struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
@@ -133,13 +134,13 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags,
 
 	switch (action) {
 	case MPATH_PREQ:
-		mhwmp_dbg("sending PREQ to %pM\n", dst);
+		mhwmp_dbg("sending PREQ to %pM\n", target);
 		ie_len = 37;
 		pos = skb_put(skb, 2 + ie_len);
 		*pos++ = WLAN_EID_PREQ;
 		break;
 	case MPATH_PREP:
-		mhwmp_dbg("sending PREP to %pM\n", dst);
+		mhwmp_dbg("sending PREP to %pM\n", target);
 		ie_len = 31;
 		pos = skb_put(skb, 2 + ie_len);
 		*pos++ = WLAN_EID_PREP;
@@ -165,7 +166,7 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags,
 	}
 	memcpy(pos, orig_addr, ETH_ALEN);
 	pos += ETH_ALEN;
-	memcpy(pos, &orig_dsn, 4);
+	memcpy(pos, &orig_sn, 4);
 	pos += 4;
 	if (action != MPATH_RANN) {
 		memcpy(pos, &lifetime, 4);
@@ -176,12 +177,12 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags,
 	if (action == MPATH_PREQ) {
 		/* destination count */
 		*pos++ = 1;
-		*pos++ = dst_flags;
+		*pos++ = target_flags;
 	}
 	if (action != MPATH_RANN) {
-		memcpy(pos, dst, ETH_ALEN);
+		memcpy(pos, target, ETH_ALEN);
 		pos += ETH_ALEN;
-		memcpy(pos, &dst_dsn, 4);
+		memcpy(pos, &target_sn, 4);
 	}
 
 	ieee80211_tx_skb(sdata, skb, 1);
@@ -191,12 +192,14 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags,
 /**
  * mesh_send_path error - Sends a PERR mesh management frame
  *
- * @dst: broken destination
- * @dst_dsn: dsn of the broken destination
+ * @target: broken destination
+ * @target_sn: SN of the broken destination
+ * @target_rcode: reason code for this PERR
  * @ra: node this frame is addressed to
  */
-int mesh_path_error_tx(u8 ttl, u8 *dst, __le32 dst_dsn, __le16 dst_rcode,
-		u8 *ra, struct ieee80211_sub_if_data *sdata)
+int mesh_path_error_tx(u8 ttl, u8 *target, __le32 target_sn,
+    		__le16 target_rcode, u8 *ra,
+		struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_local *local = sdata->local;
 	struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
@@ -234,16 +237,16 @@ int mesh_path_error_tx(u8 ttl, u8 *dst, __le32 dst_dsn, __le16 dst_rcode,
 	 * bit 2 is set if we have a reason code
 	 */
 	*pos = 0;
-	if (!dst_dsn)
+	if (!target_sn)
 		*pos |= MP_F_USN;
-	if (dst_rcode)
+	if (target_rcode)
 		*pos |= MP_F_RCODE;
 	pos++;
-	memcpy(pos, dst, ETH_ALEN);
+	memcpy(pos, target, ETH_ALEN);
 	pos += ETH_ALEN;
-	memcpy(pos, &dst_dsn, 4);
+	memcpy(pos, &target_sn, 4);
 	pos += 4;
-	memcpy(pos, &dst_rcode, 2);
+	memcpy(pos, &target_rcode, 2);
 
 	ieee80211_tx_skb(sdata, skb, 1);
 	return 0;
@@ -324,7 +327,7 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata,
 	struct sta_info *sta;
 	bool fresh_info;
 	u8 *orig_addr, *ta;
-	u32 orig_dsn, orig_metric;
+	u32 orig_sn, orig_metric;
 	unsigned long orig_lifetime, exp_time;
 	u32 last_hop_metric, new_metric;
 	bool process = true;
@@ -343,7 +346,7 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata,
 	switch (action) {
 	case MPATH_PREQ:
 		orig_addr = PREQ_IE_ORIG_ADDR(hwmp_ie);
-		orig_dsn = PREQ_IE_ORIG_DSN(hwmp_ie);
+		orig_sn = PREQ_IE_ORIG_SN(hwmp_ie);
 		orig_lifetime = PREQ_IE_LIFETIME(hwmp_ie);
 		orig_metric = PREQ_IE_METRIC(hwmp_ie);
 		break;
@@ -356,7 +359,7 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata,
 		 * information from both PREQ and PREP frames.
 		 */
 		orig_addr = PREP_IE_ORIG_ADDR(hwmp_ie);
-		orig_dsn = PREP_IE_ORIG_DSN(hwmp_ie);
+		orig_sn = PREP_IE_ORIG_SN(hwmp_ie);
 		orig_lifetime = PREP_IE_LIFETIME(hwmp_ie);
 		orig_metric = PREP_IE_METRIC(hwmp_ie);
 		break;
@@ -382,9 +385,9 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata,
 			if (mpath->flags & MESH_PATH_FIXED)
 				fresh_info = false;
 			else if ((mpath->flags & MESH_PATH_ACTIVE) &&
-			    (mpath->flags & MESH_PATH_DSN_VALID)) {
-				if (DSN_GT(mpath->dsn, orig_dsn) ||
-				    (mpath->dsn == orig_dsn &&
+			    (mpath->flags & MESH_PATH_SN_VALID)) {
+				if (SN_GT(mpath->sn, orig_sn) ||
+				    (mpath->sn == orig_sn &&
 				     action == MPATH_PREQ &&
 				     new_metric > mpath->metric)) {
 					process = false;
@@ -403,9 +406,9 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata,
 
 		if (fresh_info) {
 			mesh_path_assign_nexthop(mpath, sta);
-			mpath->flags |= MESH_PATH_DSN_VALID;
+			mpath->flags |= MESH_PATH_SN_VALID;
 			mpath->metric = new_metric;
-			mpath->dsn = orig_dsn;
+			mpath->sn = orig_sn;
 			mpath->exp_time = time_after(mpath->exp_time, exp_time)
 					  ?  mpath->exp_time : exp_time;
 			mesh_path_activate(mpath);
@@ -444,7 +447,7 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata,
 
 		if (fresh_info) {
 			mesh_path_assign_nexthop(mpath, sta);
-			mpath->flags &= ~MESH_PATH_DSN_VALID;
+			mpath->flags &= ~MESH_PATH_SN_VALID;
 			mpath->metric = last_hop_metric;
 			mpath->exp_time = time_after(mpath->exp_time, exp_time)
 					  ?  mpath->exp_time : exp_time;
@@ -466,47 +469,47 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
 {
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 	struct mesh_path *mpath;
-	u8 *dst_addr, *orig_addr;
-	u8 dst_flags, ttl;
-	u32 orig_dsn, dst_dsn, lifetime;
+	u8 *target_addr, *orig_addr;
+	u8 target_flags, ttl;
+	u32 orig_sn, target_sn, lifetime;
 	bool reply = false;
 	bool forward = true;
 
-	/* Update destination DSN, if present */
-	dst_addr = PREQ_IE_DST_ADDR(preq_elem);
+	/* Update target SN, if present */
+	target_addr = PREQ_IE_TARGET_ADDR(preq_elem);
 	orig_addr = PREQ_IE_ORIG_ADDR(preq_elem);
-	dst_dsn = PREQ_IE_DST_DSN(preq_elem);
-	orig_dsn = PREQ_IE_ORIG_DSN(preq_elem);
-	dst_flags = PREQ_IE_DST_F(preq_elem);
+	target_sn = PREQ_IE_TARGET_SN(preq_elem);
+	orig_sn = PREQ_IE_ORIG_SN(preq_elem);
+	target_flags = PREQ_IE_TARGET_F(preq_elem);
 
 	mhwmp_dbg("received PREQ from %pM\n", orig_addr);
 
-	if (memcmp(dst_addr, sdata->dev->dev_addr, ETH_ALEN) == 0) {
+	if (memcmp(target_addr, sdata->dev->dev_addr, ETH_ALEN) == 0) {
 		mhwmp_dbg("PREQ is for us\n");
 		forward = false;
 		reply = true;
 		metric = 0;
-		if (time_after(jiffies, ifmsh->last_dsn_update +
+		if (time_after(jiffies, ifmsh->last_sn_update +
 					net_traversal_jiffies(sdata)) ||
-		    time_before(jiffies, ifmsh->last_dsn_update)) {
-			dst_dsn = ++ifmsh->dsn;
-			ifmsh->last_dsn_update = jiffies;
+		    time_before(jiffies, ifmsh->last_sn_update)) {
+			target_sn = ++ifmsh->sn;
+			ifmsh->last_sn_update = jiffies;
 		}
 	} else {
 		rcu_read_lock();
-		mpath = mesh_path_lookup(dst_addr, sdata);
+		mpath = mesh_path_lookup(target_addr, sdata);
 		if (mpath) {
-			if ((!(mpath->flags & MESH_PATH_DSN_VALID)) ||
-					DSN_LT(mpath->dsn, dst_dsn)) {
-				mpath->dsn = dst_dsn;
-				mpath->flags |= MESH_PATH_DSN_VALID;
-			} else if ((!(dst_flags & MP_F_DO)) &&
+			if ((!(mpath->flags & MESH_PATH_SN_VALID)) ||
+					SN_LT(mpath->sn, target_sn)) {
+				mpath->sn = target_sn;
+				mpath->flags |= MESH_PATH_SN_VALID;
+			} else if ((!(target_flags & MP_F_DO)) &&
 					(mpath->flags & MESH_PATH_ACTIVE)) {
 				reply = true;
 				metric = mpath->metric;
-				dst_dsn = mpath->dsn;
-				if (dst_flags & MP_F_RF)
-					dst_flags |= MP_F_DO;
+				target_sn = mpath->sn;
+				if (target_flags & MP_F_RF)
+					target_flags |= MP_F_DO;
 				else
 					forward = false;
 			}
@@ -519,9 +522,9 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
 		ttl = ifmsh->mshcfg.dot11MeshTTL;
 		if (ttl != 0) {
 			mhwmp_dbg("replying to the PREQ\n");
-			mesh_path_sel_frame_tx(MPATH_PREP, 0, dst_addr,
-				cpu_to_le32(dst_dsn), 0, orig_addr,
-				cpu_to_le32(orig_dsn), mgmt->sa, 0, ttl,
+			mesh_path_sel_frame_tx(MPATH_PREP, 0, target_addr,
+				cpu_to_le32(target_sn), 0, orig_addr,
+				cpu_to_le32(orig_sn), mgmt->sa, 0, ttl,
 				cpu_to_le32(lifetime), cpu_to_le32(metric),
 				0, sdata);
 		} else
@@ -544,8 +547,8 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
 		preq_id = PREQ_IE_PREQ_ID(preq_elem);
 		hopcount = PREQ_IE_HOPCOUNT(preq_elem) + 1;
 		mesh_path_sel_frame_tx(MPATH_PREQ, flags, orig_addr,
-				cpu_to_le32(orig_dsn), dst_flags, dst_addr,
-				cpu_to_le32(dst_dsn), sdata->dev->broadcast,
+				cpu_to_le32(orig_sn), target_flags, target_addr,
+				cpu_to_le32(target_sn), sdata->dev->broadcast,
 				hopcount, ttl, cpu_to_le32(lifetime),
 				cpu_to_le32(metric), cpu_to_le32(preq_id),
 				sdata);
@@ -560,10 +563,10 @@ static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata,
 				    u8 *prep_elem, u32 metric)
 {
 	struct mesh_path *mpath;
-	u8 *dst_addr, *orig_addr;
+	u8 *target_addr, *orig_addr;
 	u8 ttl, hopcount, flags;
 	u8 next_hop[ETH_ALEN];
-	u32 dst_dsn, orig_dsn, lifetime;
+	u32 target_sn, orig_sn, lifetime;
 
 	mhwmp_dbg("received PREP from %pM\n", PREP_IE_ORIG_ADDR(prep_elem));
 
@@ -573,8 +576,8 @@ static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata,
 	 * which corresponds with the originator of the PREQ which this PREP
 	 * replies
 	 */
-	dst_addr = PREP_IE_DST_ADDR(prep_elem);
-	if (memcmp(dst_addr, sdata->dev->dev_addr, ETH_ALEN) == 0)
+	target_addr = PREP_IE_TARGET_ADDR(prep_elem);
+	if (memcmp(target_addr, sdata->dev->dev_addr, ETH_ALEN) == 0)
 		/* destination, no forwarding required */
 		return;
 
@@ -585,7 +588,7 @@ static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata,
 	}
 
 	rcu_read_lock();
-	mpath = mesh_path_lookup(dst_addr, sdata);
+	mpath = mesh_path_lookup(target_addr, sdata);
 	if (mpath)
 		spin_lock_bh(&mpath->state_lock);
 	else
@@ -601,13 +604,13 @@ static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata,
 	lifetime = PREP_IE_LIFETIME(prep_elem);
 	hopcount = PREP_IE_HOPCOUNT(prep_elem) + 1;
 	orig_addr = PREP_IE_ORIG_ADDR(prep_elem);
-	dst_dsn = PREP_IE_DST_DSN(prep_elem);
-	orig_dsn = PREP_IE_ORIG_DSN(prep_elem);
+	target_sn = PREP_IE_TARGET_SN(prep_elem);
+	orig_sn = PREP_IE_ORIG_SN(prep_elem);
 
 	mesh_path_sel_frame_tx(MPATH_PREP, flags, orig_addr,
-		cpu_to_le32(orig_dsn), 0, dst_addr,
-		cpu_to_le32(dst_dsn), mpath->next_hop->sta.addr, hopcount, ttl,
-		cpu_to_le32(lifetime), cpu_to_le32(metric),
+		cpu_to_le32(orig_sn), 0, target_addr,
+		cpu_to_le32(target_sn), mpath->next_hop->sta.addr, hopcount,
+		ttl, cpu_to_le32(lifetime), cpu_to_le32(metric),
 		0, sdata);
 	rcu_read_unlock();
 
@@ -627,10 +630,10 @@ static void hwmp_perr_frame_process(struct ieee80211_sub_if_data *sdata,
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 	struct mesh_path *mpath;
 	u8 ttl;
-	u8 *ta, *dst_addr;
-	u8 dst_flags;
-	u32 dst_dsn;
-	u16 dst_rcode;
+	u8 *ta, *target_addr;
+	u8 target_flags;
+	u32 target_sn;
+	u16 target_rcode;
 
 	ta = mgmt->sa;
 	ttl = PERR_IE_TTL(perr_elem);
@@ -639,24 +642,24 @@ static void hwmp_perr_frame_process(struct ieee80211_sub_if_data *sdata,
 		return;
 	}
 	ttl--;
-	dst_flags = PERR_IE_DST_FLAGS(perr_elem);
-	dst_addr = PERR_IE_DST_ADDR(perr_elem);
-	dst_dsn = PERR_IE_DST_DSN(perr_elem);
-	dst_rcode = PERR_IE_DST_RCODE(perr_elem);
+	target_flags = PERR_IE_TARGET_FLAGS(perr_elem);
+	target_addr = PERR_IE_TARGET_ADDR(perr_elem);
+	target_sn = PERR_IE_TARGET_SN(perr_elem);
+	target_rcode = PERR_IE_TARGET_RCODE(perr_elem);
 
 	rcu_read_lock();
-	mpath = mesh_path_lookup(dst_addr, sdata);
+	mpath = mesh_path_lookup(target_addr, sdata);
 	if (mpath) {
 		spin_lock_bh(&mpath->state_lock);
 		if (mpath->flags & MESH_PATH_ACTIVE &&
 		    memcmp(ta, mpath->next_hop->sta.addr, ETH_ALEN) == 0 &&
-		    (!(mpath->flags & MESH_PATH_DSN_VALID) ||
-		    DSN_GT(dst_dsn, mpath->dsn))) {
+		    (!(mpath->flags & MESH_PATH_SN_VALID) ||
+		    SN_GT(target_sn, mpath->sn))) {
 			mpath->flags &= ~MESH_PATH_ACTIVE;
-			mpath->dsn = dst_dsn;
+			mpath->sn = target_sn;
 			spin_unlock_bh(&mpath->state_lock);
-			mesh_path_error_tx(ttl, dst_addr, cpu_to_le32(dst_dsn),
-					   cpu_to_le16(dst_rcode),
+			mesh_path_error_tx(ttl, target_addr, cpu_to_le32(target_sn),
+					   cpu_to_le16(target_rcode),
 					   sdata->dev->broadcast, sdata);
 		} else
 			spin_unlock_bh(&mpath->state_lock);
@@ -673,7 +676,7 @@ static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata,
 	u8 *ta;
 	u8 ttl, flags, hopcount;
 	u8 *orig_addr;
-	u32 orig_dsn, metric;
+	u32 orig_sn, metric;
 
 	ta = mgmt->sa;
 	ttl = rann->rann_ttl;
@@ -684,7 +687,7 @@ static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata,
 	ttl--;
 	flags = rann->rann_flags;
 	orig_addr = rann->rann_addr;
-	orig_dsn = rann->rann_seq;
+	orig_sn = rann->rann_seq;
 	hopcount = rann->rann_hopcount;
 	hopcount++;
 	metric = rann->rann_metric;
@@ -703,14 +706,14 @@ static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata,
 		mesh_queue_preq(mpath,
 				PREQ_Q_F_START | PREQ_Q_F_REFRESH);
 	}
-	if (mpath->dsn < orig_dsn) {
+	if (mpath->sn < orig_sn) {
 		mesh_path_sel_frame_tx(MPATH_RANN, flags, orig_addr,
-				       cpu_to_le32(orig_dsn),
+				       cpu_to_le32(orig_sn),
 				       0, NULL, 0, sdata->dev->broadcast,
 				       hopcount, ttl, 0,
 				       cpu_to_le32(metric + mpath->metric),
 				       0, sdata);
-		mpath->dsn = orig_dsn;
+		mpath->sn = orig_sn;
 	}
 	rcu_read_unlock();
 }
@@ -823,7 +826,7 @@ void mesh_path_start_discovery(struct ieee80211_sub_if_data *sdata)
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 	struct mesh_preq_queue *preq_node;
 	struct mesh_path *mpath;
-	u8 ttl, dst_flags;
+	u8 ttl, target_flags;
 	u32 lifetime;
 
 	spin_lock_bh(&ifmsh->mesh_preq_queue_lock);
@@ -865,11 +868,11 @@ void mesh_path_start_discovery(struct ieee80211_sub_if_data *sdata)
 
 	ifmsh->last_preq = jiffies;
 
-	if (time_after(jiffies, ifmsh->last_dsn_update +
+	if (time_after(jiffies, ifmsh->last_sn_update +
 				net_traversal_jiffies(sdata)) ||
-	    time_before(jiffies, ifmsh->last_dsn_update)) {
-		++ifmsh->dsn;
-		sdata->u.mesh.last_dsn_update = jiffies;
+	    time_before(jiffies, ifmsh->last_sn_update)) {
+		++ifmsh->sn;
+		sdata->u.mesh.last_sn_update = jiffies;
 	}
 	lifetime = default_lifetime(sdata);
 	ttl = sdata->u.mesh.mshcfg.dot11MeshTTL;
@@ -880,14 +883,14 @@ void mesh_path_start_discovery(struct ieee80211_sub_if_data *sdata)
 	}
 
 	if (preq_node->flags & PREQ_Q_F_REFRESH)
-		dst_flags = MP_F_DO;
+		target_flags = MP_F_DO;
 	else
-		dst_flags = MP_F_RF;
+		target_flags = MP_F_RF;
 
 	spin_unlock_bh(&mpath->state_lock);
 	mesh_path_sel_frame_tx(MPATH_PREQ, 0, sdata->dev->dev_addr,
-			cpu_to_le32(ifmsh->dsn), dst_flags, mpath->dst,
-			cpu_to_le32(mpath->dsn), sdata->dev->broadcast, 0,
+			cpu_to_le32(ifmsh->sn), target_flags, mpath->dst,
+			cpu_to_le32(mpath->sn), sdata->dev->broadcast, 0,
 			ttl, cpu_to_le32(lifetime), 0,
 			cpu_to_le32(ifmsh->preq_id++), sdata);
 	mod_timer(&mpath->timer, jiffies + mpath->discovery_timeout);
@@ -914,15 +917,15 @@ int mesh_nexthop_lookup(struct sk_buff *skb,
 	struct sk_buff *skb_to_free = NULL;
 	struct mesh_path *mpath;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
-	u8 *dst_addr = hdr->addr3;
+	u8 *target_addr = hdr->addr3;
 	int err = 0;
 
 	rcu_read_lock();
-	mpath = mesh_path_lookup(dst_addr, sdata);
+	mpath = mesh_path_lookup(target_addr, sdata);
 
 	if (!mpath) {
-		mesh_path_add(dst_addr, sdata);
-		mpath = mesh_path_lookup(dst_addr, sdata);
+		mesh_path_add(target_addr, sdata);
+		mpath = mesh_path_lookup(target_addr, sdata);
 		if (!mpath) {
 			sdata->u.mesh.mshstats.dropped_frames_no_route++;
 			err = -ENOSPC;
diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index 5d54123..2cebdf5 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -463,10 +463,10 @@ void mesh_plink_broken(struct sta_info *sta)
 		    mpath->flags & MESH_PATH_ACTIVE &&
 		    !(mpath->flags & MESH_PATH_FIXED)) {
 			mpath->flags &= ~MESH_PATH_ACTIVE;
-			++mpath->dsn;
+			++mpath->sn;
 			spin_unlock_bh(&mpath->state_lock);
 			mesh_path_error_tx(MESH_TTL, mpath->dst,
-					cpu_to_le32(mpath->dsn),
+					cpu_to_le32(mpath->sn),
 					PERR_RCODE_DEST_UNREACH,
 					sdata->dev->broadcast, sdata);
 		} else
@@ -602,7 +602,7 @@ void mesh_path_discard_frame(struct sk_buff *skb,
 {
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 	struct mesh_path *mpath;
-	u32 dsn = 0;
+	u32 sn = 0;
 
 	if (memcmp(hdr->addr4, sdata->dev->dev_addr, ETH_ALEN) != 0) {
 		u8 *ra, *da;
@@ -611,8 +611,8 @@ void mesh_path_discard_frame(struct sk_buff *skb,
 		ra = hdr->addr1;
 		mpath = mesh_path_lookup(da, sdata);
 		if (mpath)
-			dsn = ++mpath->dsn;
-		mesh_path_error_tx(MESH_TTL, skb->data, cpu_to_le32(dsn),
+			sn = ++mpath->sn;
+		mesh_path_error_tx(MESH_TTL, skb->data, cpu_to_le32(sn),
 				   PERR_RCODE_NO_ROUTE, ra, sdata);
 	}
 
@@ -648,7 +648,7 @@ void mesh_path_fix_nexthop(struct mesh_path *mpath, struct sta_info *next_hop)
 {
 	spin_lock_bh(&mpath->state_lock);
 	mesh_path_assign_nexthop(mpath, next_hop);
-	mpath->dsn = 0xffff;
+	mpath->sn = 0xffff;
 	mpath->metric = 0;
 	mpath->hop_count = 0;
 	mpath->exp_time = 0;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 8ed62b6..867b023 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2105,9 +2105,9 @@ static int nl80211_send_mpath(struct sk_buff *msg, u32 pid, u32 seq,
 	if (pinfo->filled & MPATH_INFO_FRAME_QLEN)
 		NLA_PUT_U32(msg, NL80211_MPATH_INFO_FRAME_QLEN,
 			    pinfo->frame_qlen);
-	if (pinfo->filled & MPATH_INFO_DSN)
-		NLA_PUT_U32(msg, NL80211_MPATH_INFO_DSN,
-			    pinfo->dsn);
+	if (pinfo->filled & MPATH_INFO_SN)
+		NLA_PUT_U32(msg, NL80211_MPATH_INFO_SN,
+			    pinfo->sn);
 	if (pinfo->filled & MPATH_INFO_METRIC)
 		NLA_PUT_U32(msg, NL80211_MPATH_INFO_METRIC,
 			    pinfo->metric);
-- 
1.5.6.5

[PATCH v2 18/20] mac80211: implement a timer to send RANN action frames

[Rui Paulo]

RANN (Root Annoucement) frame TX. Send an action frame every second
trying to build a path to all nodes on the mesh.

Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
---
 net/mac80211/ieee80211_i.h |    1 +
 net/mac80211/mesh.c        |   39 +++++++++++++++++++++++++++++++++++++++
 net/mac80211/mesh.h        |    3 +++
 net/mac80211/mesh_hwmp.c   |   11 +++++++++++
 4 files changed, 54 insertions(+), 0 deletions(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 4259852..bce4f38 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -352,6 +352,7 @@ struct ieee80211_if_mesh {
 	struct work_struct work;
 	struct timer_list housekeeping_timer;
 	struct timer_list mesh_path_timer;
+	struct timer_list mesh_path_root_timer;
 	struct sk_buff_head skb_queue;
 
 	unsigned long timers_running;
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 0f3e114..88dcfe3 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -14,6 +14,7 @@
 
 #define IEEE80211_MESH_PEER_INACTIVITY_LIMIT (1800 * HZ)
 #define IEEE80211_MESH_HOUSEKEEPING_INTERVAL (60 * HZ)
+#define IEEE80211_MESH_RANN_INTERVAL	     (1 * HZ)
 
 #define MESHCONF_PP_OFFSET 	0		/* Path Selection Protocol */
 #define MESHCONF_PM_OFFSET	1		/* Path Selection Metric   */
@@ -26,6 +27,7 @@
 
 #define TMR_RUNNING_HK	0
 #define TMR_RUNNING_MP	1
+#define TMR_RUNNING_MPR	2
 
 int mesh_allocated;
 static struct kmem_cache *rm_cache;
@@ -354,6 +356,23 @@ static void ieee80211_mesh_path_timer(unsigned long data)
 	ieee80211_queue_work(&local->hw, &ifmsh->work);
 }
 
+static void ieee80211_mesh_path_root_timer(unsigned long data)
+{
+	struct ieee80211_sub_if_data *sdata =
+		(struct ieee80211_sub_if_data *) data;
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+	struct ieee80211_local *local = sdata->local;
+
+	set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
+
+	if (local->quiescing) {
+		set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running);
+		return;
+	}
+
+	ieee80211_queue_work(&local->hw, &ifmsh->work);
+}
+
 /**
  * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame
  * @hdr:    	802.11 frame header
@@ -447,6 +466,15 @@ static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata,
 		  round_jiffies(jiffies + IEEE80211_MESH_HOUSEKEEPING_INTERVAL));
 }
 
+static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+
+	mesh_path_tx_root_frame(sdata);
+	mod_timer(&ifmsh->mesh_path_root_timer,
+		  round_jiffies(jiffies + IEEE80211_MESH_RANN_INTERVAL));
+}
+
 #ifdef CONFIG_PM
 void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata)
 {
@@ -461,6 +489,8 @@ void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata)
 		set_bit(TMR_RUNNING_HK, &ifmsh->timers_running);
 	if (del_timer_sync(&ifmsh->mesh_path_timer))
 		set_bit(TMR_RUNNING_MP, &ifmsh->timers_running);
+	if (del_timer_sync(&ifmsh->mesh_path_root_timer))
+		set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running);
 }
 
 void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata)
@@ -471,6 +501,8 @@ void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata)
 		add_timer(&ifmsh->housekeeping_timer);
 	if (test_and_clear_bit(TMR_RUNNING_MP, &ifmsh->timers_running))
 		add_timer(&ifmsh->mesh_path_timer);
+	if (test_and_clear_bit(TMR_RUNNING_MPR, &ifmsh->timers_running))
+		add_timer(&ifmsh->mesh_path_root_timer);
 }
 #endif
 
@@ -490,6 +522,7 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
 void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
 {
 	del_timer_sync(&sdata->u.mesh.housekeeping_timer);
+	del_timer_sync(&sdata->u.mesh.mesh_path_root_timer);
 	/*
 	 * If the timer fired while we waited for it, it will have
 	 * requeued the work. Now the work will be running again
@@ -627,6 +660,9 @@ static void ieee80211_mesh_work(struct work_struct *work)
 
 	if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags))
 		ieee80211_mesh_housekeeping(sdata, ifmsh);
+
+	if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags))
+		ieee80211_mesh_rootpath(sdata);
 }
 
 void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local)
@@ -683,6 +719,9 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
 	setup_timer(&ifmsh->mesh_path_timer,
 		    ieee80211_mesh_path_timer,
 		    (unsigned long) sdata);
+	setup_timer(&ifmsh->mesh_path_root_timer,
+		    ieee80211_mesh_path_root_timer,
+		    (unsigned long) sdata);
 	INIT_LIST_HEAD(&ifmsh->preq_queue.list);
 	spin_lock_init(&ifmsh->mesh_preq_queue_lock);
 }
diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index ee687ad..00ee842 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -53,11 +53,13 @@ enum mesh_path_flags {
  * to grow.
  * @MESH_WORK_GROW_MPP_TABLE: the mesh portals table is full and needs to
  * grow
+ * @MESH_WORK_ROOT: the mesh root station needs to send a frame
  */
 enum mesh_deferred_task_flags {
 	MESH_WORK_HOUSEKEEPING,
 	MESH_WORK_GROW_MPATH_TABLE,
 	MESH_WORK_GROW_MPP_TABLE,
+	MESH_WORK_ROOT,
 };
 
 /**
@@ -294,6 +296,7 @@ void mesh_path_discard_frame(struct sk_buff *skb,
 		struct ieee80211_sub_if_data *sdata);
 void mesh_path_quiesce(struct ieee80211_sub_if_data *sdata);
 void mesh_path_restart(struct ieee80211_sub_if_data *sdata);
+void mesh_path_tx_root_frame(struct ieee80211_sub_if_data *sdata);
 
 extern int mesh_paths_generation;
 
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 850c403..54c3f58 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -1003,3 +1003,14 @@ void mesh_path_timer(unsigned long data)
 endmpathtimer:
 	rcu_read_unlock();
 }
+
+void
+mesh_path_tx_root_frame(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+
+	mesh_path_sel_frame_tx(MPATH_RANN, 0, sdata->dev->dev_addr,
+			       cpu_to_le32(++ifmsh->sn),
+			       0, NULL, 0, sdata->dev->broadcast,
+			       0, MESH_TTL, 0, 0, 0, sdata);
+}
-- 
1.5.6.5

[PATCH v2 19/20] mac80211: add nl80211/cfg80211 handling of the new mesh root mode option.

[Rui Paulo]

Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
---
 include/linux/nl80211.h       |    3 +++
 include/net/cfg80211.h        |    1 +
 net/mac80211/cfg.c            |    7 +++++++
 net/mac80211/debugfs_netdev.c |    2 ++
 net/mac80211/mesh.c           |   13 +++++++++++++
 net/mac80211/mesh.h           |    1 +
 net/wireless/nl80211.c        |    6 ++++++
 7 files changed, 33 insertions(+), 0 deletions(-)

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index f682911..4d4a9db 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1196,6 +1196,8 @@ enum nl80211_mntr_flags {
  * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
  * that it takes for an HWMP information element to propagate across the mesh
  *
+ * @NL80211_MESHCONF_ROOTMODE: whether root mode is enabled or not
+ *
  * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
  *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
@@ -1215,6 +1217,7 @@ enum nl80211_meshconf_params {
 	NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
 	NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
 	NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
+	NL80211_MESHCONF_HWMP_ROOTMODE,
 
 	/* keep last */
 	__NL80211_MESHCONF_ATTR_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index b3031bd..b30d023 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -506,6 +506,7 @@ struct mesh_config {
 	u32 dot11MeshHWMPactivePathTimeout;
 	u16 dot11MeshHWMPpreqMinInterval;
 	u16 dot11MeshHWMPnetDiameterTraversalTime;
+	u8  dot11MeshHWMPRootMode;
 };
 
 /**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 340678e..25e9c56 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1001,7 +1001,10 @@ static int ieee80211_set_mesh_params(struct wiphy *wiphy,
 {
 	struct mesh_config *conf;
 	struct ieee80211_sub_if_data *sdata;
+	struct ieee80211_if_mesh *ifmsh;
+
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	ifmsh = &sdata->u.mesh;
 
 	/* Set the config options which we are interested in setting */
 	conf = &(sdata->u.mesh.mshcfg);
@@ -1036,6 +1039,10 @@ static int ieee80211_set_mesh_params(struct wiphy *wiphy,
 			   mask))
 		conf->dot11MeshHWMPnetDiameterTraversalTime =
 			nconf->dot11MeshHWMPnetDiameterTraversalTime;
+	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ROOTMODE, mask)) {
+		conf->dot11MeshHWMPRootMode = nconf->dot11MeshHWMPRootMode;
+		ieee80211_mesh_root_setup(ifmsh);
+	}
 	return 0;
 }
 
diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c
index 8782264..472b203 100644
--- a/net/mac80211/debugfs_netdev.c
+++ b/net/mac80211/debugfs_netdev.c
@@ -149,6 +149,8 @@ IEEE80211_IF_FILE(path_refresh_time,
 		u.mesh.mshcfg.path_refresh_time, DEC);
 IEEE80211_IF_FILE(min_discovery_timeout,
 		u.mesh.mshcfg.min_discovery_timeout, DEC);
+IEEE80211_IF_FILE(dot11MeshHWMPRootMode,
+		u.mesh.mshcfg.dot11MeshHWMPRootMode, DEC);
 #endif
 
 
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 88dcfe3..05955dc 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -373,6 +373,17 @@ static void ieee80211_mesh_path_root_timer(unsigned long data)
 	ieee80211_queue_work(&local->hw, &ifmsh->work);
 }
 
+void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh)
+{
+	if (ifmsh->mshcfg.dot11MeshHWMPRootMode)
+		set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
+	else {
+		clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
+		/* stop running timer */
+		del_timer_sync(&ifmsh->mesh_path_root_timer);
+	}
+}
+
 /**
  * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame
  * @hdr:    	802.11 frame header
@@ -503,6 +514,7 @@ void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata)
 		add_timer(&ifmsh->mesh_path_timer);
 	if (test_and_clear_bit(TMR_RUNNING_MPR, &ifmsh->timers_running))
 		add_timer(&ifmsh->mesh_path_root_timer);
+	ieee80211_mesh_root_setup(ifmsh);
 }
 #endif
 
@@ -512,6 +524,7 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
 	struct ieee80211_local *local = sdata->local;
 
 	set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
+	ieee80211_mesh_root_setup(ifmsh);
 	ieee80211_queue_work(&local->hw, &ifmsh->work);
 	sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL;
 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON |
diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index 00ee842..5ad6975 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -242,6 +242,7 @@ ieee80211_rx_result
 ieee80211_mesh_rx_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb);
 void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata);
 void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata);
+void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh);
 
 /* Mesh paths */
 int mesh_nexthop_lookup(struct sk_buff *skb,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 867b023..c1f66fc 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2605,6 +2605,8 @@ static int nl80211_get_mesh_params(struct sk_buff *skb,
 			cur_params.dot11MeshHWMPpreqMinInterval);
 	NLA_PUT_U16(msg, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
 			cur_params.dot11MeshHWMPnetDiameterTraversalTime);
+	NLA_PUT_U8(msg, NL80211_MESHCONF_HWMP_ROOTMODE,
+			cur_params.dot11MeshHWMPRootMode);
 	nla_nest_end(msg, pinfoattr);
 	genlmsg_end(msg, hdr);
 	err = genlmsg_reply(msg, info);
@@ -2715,6 +2717,10 @@ static int nl80211_set_mesh_params(struct sk_buff *skb, struct genl_info *info)
 			dot11MeshHWMPnetDiameterTraversalTime,
 			mask, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
 			nla_get_u16);
+	FILL_IN_MESH_PARAM_IF_SET(tb, cfg,
+			dot11MeshHWMPRootMode, mask,
+			NL80211_MESHCONF_HWMP_ROOTMODE,
+			nla_get_u8);
 
 	/* Apply changes */
 	err = rdev->ops->set_mesh_params(&rdev->wiphy, dev, &cfg, mask);
-- 
1.5.6.5

[PATCH v2 20/20] mac80211: update copyrights to 2009

[Rui Paulo]

Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
---
 net/mac80211/mesh.c         |    2 +-
 net/mac80211/mesh.h         |    2 +-
 net/mac80211/mesh_hwmp.c    |    2 +-
 net/mac80211/mesh_pathtbl.c |    2 +-
 net/mac80211/mesh_plink.c   |    2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 05955dc..bbd56b0 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 open80211s Ltd.
+ * Copyright (c) 2008, 2009 open80211s Ltd.
  * Authors:    Luis Carlos Cobo <luisca@cozybit.com>
  * 	       Javier Cardona <javier@cozybit.com>
  *
diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index 5ad6975..bd0e1cb 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 open80211s Ltd.
+ * Copyright (c) 2008, 2009 open80211s Ltd.
  * Authors:    Luis Carlos Cobo <luisca@cozybit.com>
  *             Javier Cardona <javier@cozybit.com>
  *
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 54c3f58..1f2ad0a 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 open80211s Ltd.
+ * Copyright (c) 2008, 2009 open80211s Ltd.
  * Author:     Luis Carlos Cobo <luisca@cozybit.com>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index 2cebdf5..5399e7a 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 open80211s Ltd.
+ * Copyright (c) 2008, 2009 open80211s Ltd.
  * Author:     Luis Carlos Cobo <luisca@cozybit.com>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index ec68d20..f21329a 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 open80211s Ltd.
+ * Copyright (c) 2008, 2009 open80211s Ltd.
  * Author:     Luis Carlos Cobo <luisca@cozybit.com>
  *
  * This program is free software; you can redistribute it and/or modify
-- 
1.5.6.5

Re: [PATCH v2 11/20] mac80211: implement RANN processing and forwarding

[Johannes Berg]

[-- Attachment #1: Type: text/plain, Size: 683 bytes --]

On Mon, 2009-11-09 at 23:46 +0000, Rui Paulo wrote:

> +struct ieee80211_rann_ie {
> +	u8 rann_flags;
> +	u8 rann_hopcount;
> +	u8 rann_ttl;
> +	u8 rann_addr[6];

I'd prefer ETH_ALEN here, but it only changes the code, not the binary,
of course :)

> @@ -826,6 +827,7 @@ struct ieee802_11_elems {
>  	u8 preq_len;
>  	u8 prep_len;
>  	u8 perr_len;
> +	u8 rann_len;
>  	u8 ch_switch_elem_len;

I suspect you can remove rann_len since it's fixed?

> +	case MPATH_RANN:
> +		mhwmp_dbg("sending RANN from %pM\n", orig_addr);
> +		ie_len = 17;

The other two I wouldn't care too much about, but please use sizeof()
like you did when parsing the IEs.

johannes

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

Re: [PATCH v2 03/20] mac80211: implement the meshconf formation info field

[Johannes Berg]

[-- Attachment #1: Type: text/plain, Size: 334 bytes --]

On Mon, 2009-11-09 at 23:46 +0000, Rui Paulo wrote:
> The Mesh Configuration Formation Info field contains the number of
> neighbors.  This means that the beacon must be updated every time a
> peer joins or leaves.

In theory you don't have to update when you have >=15 peers, afaict, but
I don't think it matters.

johannes

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

Re: [PATCH v2 00/20] o11s update to latest draft

[Johannes Berg]

[-- Attachment #1: Type: text/plain, Size: 473 bytes --]

On Mon, 2009-11-09 at 23:46 +0000, Rui Paulo wrote:
> Hi again,
> 
> Here's take two of the mesh update patch. As I already said, the following
> patches update the mesh code to latest draft, 3.03. They also include some
> minor cleanups and improved debugging.

I can't judge this in terms of draft compliance since I don't have that
draft, but the code looks fine to me -- had just those few comments that
I sent out in reply to particular patches.

johannes

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]