* S3C2440/S3C2442 merge
@ 2010-01-26 7:57 ` Ben Dooks
0 siblings, 0 replies; 16+ messages in thread
From: Ben Dooks @ 2010-01-26 7:57 UTC (permalink / raw)
To: linux-arm-kernel
Merge mach-s3c2440 and mach-s3c2442 into one mach-s3c2440 directory
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH] ARM: S3C24XX: Merge s3c2442 and s3c2440 machines into mach-s3c2440
2010-01-26 7:57 ` Ben Dooks
@ 2010-01-26 7:58 ` Ben Dooks
-1 siblings, 0 replies; 16+ messages in thread
From: Ben Dooks @ 2010-01-26 7:58 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: Ben Dooks
Move the pair of machines in arch/arm/mach-s3c2442 into the mach-s3c2440
directory as the S3C2440 and S3C2442 are very close.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2440/Kconfig | 20 ++++++++++++++++-
arch/arm/mach-s3c2440/Makefile | 1 +
.../include/mach/gta02.h | 0
.../{mach-s3c2442 => mach-s3c2440}/mach-gta02.c | 0
arch/arm/mach-s3c2442/Kconfig | 22 --------------------
arch/arm/mach-s3c2442/Makefile | 2 -
6 files changed, 19 insertions(+), 26 deletions(-)
rename arch/arm/{mach-s3c2442 => mach-s3c2440}/include/mach/gta02.h (100%)
rename arch/arm/{mach-s3c2442 => mach-s3c2440}/mach-gta02.c (100%)
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 8087935..5486929 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -21,8 +21,7 @@ config S3C2440_DMA
help
Support for S3C2440 specific DMA code5A
-
-menu "S3C2440 Machines"
+menu "S3C2440 and S3C2442 Machines"
config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
@@ -37,6 +36,18 @@ config MACH_ANUBIS
Say Y here if you are using the Simtec Electronics ANUBIS
development system
+config MACH_NEO1973_GTA02
+ bool "Openmoko GTA02 / Freerunner phone"
+ select CPU_S3C2442
+ select MFD_PCF50633
+ select PCF50633_GPIO
+ select I2C
+ select POWER_SUPPLY
+ select MACH_NEO1973
+ select S3C2410_PWM
+ help
+ Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
select CPU_S3C2440
@@ -99,6 +110,11 @@ config SMDK2440_CPU2440
select S3C2440_XTAL_16934400
select CPU_S3C2440
+config SMDK2440_CPU2442
+ bool "SMDM2440 with S3C2442 CPU module"
+ depends on ARCH_S3C2440
+ select CPU_S3C2442
+
config MACH_AT2440EVB
bool "Avantech AT2440EVB development board"
select CPU_S3C2440
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index 5f32245..e51497c 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
+obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
# extra machine support
diff --git a/arch/arm/mach-s3c2442/include/mach/gta02.h b/arch/arm/mach-s3c2440/include/mach/gta02.h
similarity index 100%
rename from arch/arm/mach-s3c2442/include/mach/gta02.h
rename to arch/arm/mach-s3c2440/include/mach/gta02.h
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
similarity index 100%
rename from arch/arm/mach-s3c2442/mach-gta02.c
rename to arch/arm/mach-s3c2440/mach-gta02.c
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
index 8d38118..4832cd6 100644
--- a/arch/arm/mach-s3c2442/Kconfig
+++ b/arch/arm/mach-s3c2442/Kconfig
@@ -13,25 +13,3 @@ config CPU_S3C2442
select CPU_LLSERIAL_S3C2440
help
Support for S3C2442 Samsung Mobile CPU based systems.
-
-
-menu "S3C2442 Machines"
-
-config SMDK2440_CPU2442
- bool "SMDM2440 with S3C2442 CPU module"
- depends on ARCH_S3C2440
- select CPU_S3C2442
-
-config MACH_NEO1973_GTA02
- bool "Openmoko GTA02 / Freerunner phone"
- select CPU_S3C2442
- select MFD_PCF50633
- select PCF50633_GPIO
- select I2C
- select POWER_SUPPLY
- select MACH_NEO1973
- select S3C2410_PWM
- help
- Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
-
-endmenu
diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
index 2a19113..2a909c6 100644
--- a/arch/arm/mach-s3c2442/Makefile
+++ b/arch/arm/mach-s3c2442/Makefile
@@ -12,7 +12,5 @@ obj- :=
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
obj-$(CONFIG_CPU_S3C2442) += clock.o
-obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
-
# Machine support
--
1.6.0.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH] ARM: S3C24XX: Merge s3c2442 and s3c2440 machines into mach-s3c2440
@ 2010-01-26 7:58 ` Ben Dooks
0 siblings, 0 replies; 16+ messages in thread
From: Ben Dooks @ 2010-01-26 7:58 UTC (permalink / raw)
To: linux-arm-kernel
Move the pair of machines in arch/arm/mach-s3c2442 into the mach-s3c2440
directory as the S3C2440 and S3C2442 are very close.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2440/Kconfig | 20 ++++++++++++++++-
arch/arm/mach-s3c2440/Makefile | 1 +
.../include/mach/gta02.h | 0
.../{mach-s3c2442 => mach-s3c2440}/mach-gta02.c | 0
arch/arm/mach-s3c2442/Kconfig | 22 --------------------
arch/arm/mach-s3c2442/Makefile | 2 -
6 files changed, 19 insertions(+), 26 deletions(-)
rename arch/arm/{mach-s3c2442 => mach-s3c2440}/include/mach/gta02.h (100%)
rename arch/arm/{mach-s3c2442 => mach-s3c2440}/mach-gta02.c (100%)
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 8087935..5486929 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -21,8 +21,7 @@ config S3C2440_DMA
help
Support for S3C2440 specific DMA code5A
-
-menu "S3C2440 Machines"
+menu "S3C2440 and S3C2442 Machines"
config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
@@ -37,6 +36,18 @@ config MACH_ANUBIS
Say Y here if you are using the Simtec Electronics ANUBIS
development system
+config MACH_NEO1973_GTA02
+ bool "Openmoko GTA02 / Freerunner phone"
+ select CPU_S3C2442
+ select MFD_PCF50633
+ select PCF50633_GPIO
+ select I2C
+ select POWER_SUPPLY
+ select MACH_NEO1973
+ select S3C2410_PWM
+ help
+ Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
select CPU_S3C2440
@@ -99,6 +110,11 @@ config SMDK2440_CPU2440
select S3C2440_XTAL_16934400
select CPU_S3C2440
+config SMDK2440_CPU2442
+ bool "SMDM2440 with S3C2442 CPU module"
+ depends on ARCH_S3C2440
+ select CPU_S3C2442
+
config MACH_AT2440EVB
bool "Avantech AT2440EVB development board"
select CPU_S3C2440
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index 5f32245..e51497c 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
+obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
# extra machine support
diff --git a/arch/arm/mach-s3c2442/include/mach/gta02.h b/arch/arm/mach-s3c2440/include/mach/gta02.h
similarity index 100%
rename from arch/arm/mach-s3c2442/include/mach/gta02.h
rename to arch/arm/mach-s3c2440/include/mach/gta02.h
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
similarity index 100%
rename from arch/arm/mach-s3c2442/mach-gta02.c
rename to arch/arm/mach-s3c2440/mach-gta02.c
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
index 8d38118..4832cd6 100644
--- a/arch/arm/mach-s3c2442/Kconfig
+++ b/arch/arm/mach-s3c2442/Kconfig
@@ -13,25 +13,3 @@ config CPU_S3C2442
select CPU_LLSERIAL_S3C2440
help
Support for S3C2442 Samsung Mobile CPU based systems.
-
-
-menu "S3C2442 Machines"
-
-config SMDK2440_CPU2442
- bool "SMDM2440 with S3C2442 CPU module"
- depends on ARCH_S3C2440
- select CPU_S3C2442
-
-config MACH_NEO1973_GTA02
- bool "Openmoko GTA02 / Freerunner phone"
- select CPU_S3C2442
- select MFD_PCF50633
- select PCF50633_GPIO
- select I2C
- select POWER_SUPPLY
- select MACH_NEO1973
- select S3C2410_PWM
- help
- Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
-
-endmenu
diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
index 2a19113..2a909c6 100644
--- a/arch/arm/mach-s3c2442/Makefile
+++ b/arch/arm/mach-s3c2442/Makefile
@@ -12,7 +12,5 @@ obj- :=
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
obj-$(CONFIG_CPU_S3C2442) += clock.o
-obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
-
# Machine support
--
1.6.0.4
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH] ARM: S3C2442: Merge s3c2442.c and clock.c
2010-01-26 7:57 ` Ben Dooks
@ 2010-01-26 7:58 ` Ben Dooks
-1 siblings, 0 replies; 16+ messages in thread
From: Ben Dooks @ 2010-01-26 7:58 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: Ben Dooks
Merge s3c2442.c and clock.c as the s3c242.c does not contain much and
the clock parts are always built for s3c2442 anyway.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2442/Makefile | 1 -
arch/arm/mach-s3c2442/clock.c | 153 ---------------------------------------
arch/arm/mach-s3c2442/s3c2442.c | 153 ++++++++++++++++++++++++++++++++++++---
3 files changed, 142 insertions(+), 165 deletions(-)
delete mode 100644 arch/arm/mach-s3c2442/clock.c
diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
index 2a909c6..7e31ccd 100644
--- a/arch/arm/mach-s3c2442/Makefile
+++ b/arch/arm/mach-s3c2442/Makefile
@@ -10,7 +10,6 @@ obj-n :=
obj- :=
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
-obj-$(CONFIG_CPU_S3C2442) += clock.o
# Machine support
diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c
deleted file mode 100644
index d9b692a..0000000
--- a/arch/arm/mach-s3c2442/clock.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/* linux/arch/arm/mach-s3c2442/clock.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2442 Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* S3C2442 extended clock support */
-
-static unsigned long s3c2442_camif_upll_round(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- int div;
-
- if (rate > parent_rate)
- return parent_rate;
-
- div = parent_rate / rate;
-
- if (div == 3)
- return parent_rate / 3;
-
- /* note, we remove the +/- 1 calculations for the divisor */
-
- div /= 2;
-
- if (div < 1)
- div = 1;
- else if (div > 16)
- div = 16;
-
- return parent_rate / (div * 2);
-}
-
-static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-
- rate = s3c2442_camif_upll_round(clk, rate);
-
- camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3;
-
- if (rate == parent_rate) {
- camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL;
- } else if ((parent_rate / rate) == 3) {
- camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
- camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3;
- } else {
- camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK;
- camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
- camdivn |= (((parent_rate / rate) / 2) - 1);
- }
-
- __raw_writel(camdivn, S3C2440_CAMDIVN);
-
- return 0;
-}
-
-/* Extra S3C2442 clocks */
-
-static struct clk s3c2442_clk_cam = {
- .name = "camif",
- .id = -1,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2442_clk_cam_upll = {
- .name = "camif-upll",
- .id = -1,
- .ops = &(struct clk_ops) {
- .set_rate = s3c2442_camif_upll_setrate,
- .round_rate = s3c2442_camif_upll_round,
- },
-};
-
-static int s3c2442_clk_add(struct sys_device *sysdev)
-{
- struct clk *clock_upll;
- struct clk *clock_h;
- struct clk *clock_p;
-
- clock_p = clk_get(NULL, "pclk");
- clock_h = clk_get(NULL, "hclk");
- clock_upll = clk_get(NULL, "upll");
-
- if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
- printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
- return -EINVAL;
- }
-
- s3c2442_clk_cam.parent = clock_h;
- s3c2442_clk_cam_upll.parent = clock_upll;
-
- s3c24xx_register_clock(&s3c2442_clk_cam);
- s3c24xx_register_clock(&s3c2442_clk_cam_upll);
-
- clk_disable(&s3c2442_clk_cam);
-
- return 0;
-}
-
-static struct sysdev_driver s3c2442_clk_driver = {
- .add = s3c2442_clk_add,
-};
-
-static __init int s3c2442_clk_init(void)
-{
- return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver);
-}
-
-arch_initcall(s3c2442_clk_init);
diff --git a/arch/arm/mach-s3c2442/s3c2442.c b/arch/arm/mach-s3c2442/s3c2442.c
index 4663bdc..188ad1e 100644
--- a/arch/arm/mach-s3c2442/s3c2442.c
+++ b/arch/arm/mach-s3c2442/s3c2442.c
@@ -1,27 +1,158 @@
/* linux/arch/arm/mach-s3c2442/s3c2442.c
*
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
*
- * Samsung S3C2442 Mobile CPU support
+ * S3C2442 core and lock support
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/init.h>
+#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/device.h>
#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/io.h>
-#include <plat/s3c2442.h>
+#include <mach/hardware.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/clock.h>
#include <plat/cpu.h>
+/* S3C2442 extended clock support */
+
+static unsigned long s3c2442_camif_upll_round(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ int div;
+
+ if (rate > parent_rate)
+ return parent_rate;
+
+ div = parent_rate / rate;
+
+ if (div == 3)
+ return parent_rate / 3;
+
+ /* note, we remove the +/- 1 calculations for the divisor */
+
+ div /= 2;
+
+ if (div < 1)
+ div = 1;
+ else if (div > 16)
+ div = 16;
+
+ return parent_rate / (div * 2);
+}
+
+static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
+
+ rate = s3c2442_camif_upll_round(clk, rate);
+
+ camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3;
+
+ if (rate == parent_rate) {
+ camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL;
+ } else if ((parent_rate / rate) == 3) {
+ camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
+ camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3;
+ } else {
+ camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK;
+ camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
+ camdivn |= (((parent_rate / rate) / 2) - 1);
+ }
+
+ __raw_writel(camdivn, S3C2440_CAMDIVN);
+
+ return 0;
+}
+
+/* Extra S3C2442 clocks */
+
+static struct clk s3c2442_clk_cam = {
+ .name = "camif",
+ .id = -1,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2440_CLKCON_CAMERA,
+};
+
+static struct clk s3c2442_clk_cam_upll = {
+ .name = "camif-upll",
+ .id = -1,
+ .ops = &(struct clk_ops) {
+ .set_rate = s3c2442_camif_upll_setrate,
+ .round_rate = s3c2442_camif_upll_round,
+ },
+};
+
+static int s3c2442_clk_add(struct sys_device *sysdev)
+{
+ struct clk *clock_upll;
+ struct clk *clock_h;
+ struct clk *clock_p;
+
+ clock_p = clk_get(NULL, "pclk");
+ clock_h = clk_get(NULL, "hclk");
+ clock_upll = clk_get(NULL, "upll");
+
+ if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
+ printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
+ return -EINVAL;
+ }
+
+ s3c2442_clk_cam.parent = clock_h;
+ s3c2442_clk_cam_upll.parent = clock_upll;
+
+ s3c24xx_register_clock(&s3c2442_clk_cam);
+ s3c24xx_register_clock(&s3c2442_clk_cam_upll);
+
+ clk_disable(&s3c2442_clk_cam);
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2442_clk_driver = {
+ .add = s3c2442_clk_add,
+};
+
+static __init int s3c2442_clk_init(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver);
+}
+
+arch_initcall(s3c2442_clk_init);
+
+
static struct sys_device s3c2442_sysdev = {
.cls = &s3c2442_sysclass,
};
--
1.6.0.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH] ARM: S3C2442: Merge s3c2442.c and clock.c
@ 2010-01-26 7:58 ` Ben Dooks
0 siblings, 0 replies; 16+ messages in thread
From: Ben Dooks @ 2010-01-26 7:58 UTC (permalink / raw)
To: linux-arm-kernel
Merge s3c2442.c and clock.c as the s3c242.c does not contain much and
the clock parts are always built for s3c2442 anyway.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2442/Makefile | 1 -
arch/arm/mach-s3c2442/clock.c | 153 ---------------------------------------
arch/arm/mach-s3c2442/s3c2442.c | 153 ++++++++++++++++++++++++++++++++++++---
3 files changed, 142 insertions(+), 165 deletions(-)
delete mode 100644 arch/arm/mach-s3c2442/clock.c
diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
index 2a909c6..7e31ccd 100644
--- a/arch/arm/mach-s3c2442/Makefile
+++ b/arch/arm/mach-s3c2442/Makefile
@@ -10,7 +10,6 @@ obj-n :=
obj- :=
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
-obj-$(CONFIG_CPU_S3C2442) += clock.o
# Machine support
diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c
deleted file mode 100644
index d9b692a..0000000
--- a/arch/arm/mach-s3c2442/clock.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/* linux/arch/arm/mach-s3c2442/clock.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2442 Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* S3C2442 extended clock support */
-
-static unsigned long s3c2442_camif_upll_round(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- int div;
-
- if (rate > parent_rate)
- return parent_rate;
-
- div = parent_rate / rate;
-
- if (div == 3)
- return parent_rate / 3;
-
- /* note, we remove the +/- 1 calculations for the divisor */
-
- div /= 2;
-
- if (div < 1)
- div = 1;
- else if (div > 16)
- div = 16;
-
- return parent_rate / (div * 2);
-}
-
-static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-
- rate = s3c2442_camif_upll_round(clk, rate);
-
- camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3;
-
- if (rate == parent_rate) {
- camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL;
- } else if ((parent_rate / rate) == 3) {
- camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
- camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3;
- } else {
- camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK;
- camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
- camdivn |= (((parent_rate / rate) / 2) - 1);
- }
-
- __raw_writel(camdivn, S3C2440_CAMDIVN);
-
- return 0;
-}
-
-/* Extra S3C2442 clocks */
-
-static struct clk s3c2442_clk_cam = {
- .name = "camif",
- .id = -1,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2442_clk_cam_upll = {
- .name = "camif-upll",
- .id = -1,
- .ops = &(struct clk_ops) {
- .set_rate = s3c2442_camif_upll_setrate,
- .round_rate = s3c2442_camif_upll_round,
- },
-};
-
-static int s3c2442_clk_add(struct sys_device *sysdev)
-{
- struct clk *clock_upll;
- struct clk *clock_h;
- struct clk *clock_p;
-
- clock_p = clk_get(NULL, "pclk");
- clock_h = clk_get(NULL, "hclk");
- clock_upll = clk_get(NULL, "upll");
-
- if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
- printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
- return -EINVAL;
- }
-
- s3c2442_clk_cam.parent = clock_h;
- s3c2442_clk_cam_upll.parent = clock_upll;
-
- s3c24xx_register_clock(&s3c2442_clk_cam);
- s3c24xx_register_clock(&s3c2442_clk_cam_upll);
-
- clk_disable(&s3c2442_clk_cam);
-
- return 0;
-}
-
-static struct sysdev_driver s3c2442_clk_driver = {
- .add = s3c2442_clk_add,
-};
-
-static __init int s3c2442_clk_init(void)
-{
- return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver);
-}
-
-arch_initcall(s3c2442_clk_init);
diff --git a/arch/arm/mach-s3c2442/s3c2442.c b/arch/arm/mach-s3c2442/s3c2442.c
index 4663bdc..188ad1e 100644
--- a/arch/arm/mach-s3c2442/s3c2442.c
+++ b/arch/arm/mach-s3c2442/s3c2442.c
@@ -1,27 +1,158 @@
/* linux/arch/arm/mach-s3c2442/s3c2442.c
*
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
*
- * Samsung S3C2442 Mobile CPU support
+ * S3C2442 core and lock support
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/init.h>
+#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/device.h>
#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/io.h>
-#include <plat/s3c2442.h>
+#include <mach/hardware.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/clock.h>
#include <plat/cpu.h>
+/* S3C2442 extended clock support */
+
+static unsigned long s3c2442_camif_upll_round(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ int div;
+
+ if (rate > parent_rate)
+ return parent_rate;
+
+ div = parent_rate / rate;
+
+ if (div == 3)
+ return parent_rate / 3;
+
+ /* note, we remove the +/- 1 calculations for the divisor */
+
+ div /= 2;
+
+ if (div < 1)
+ div = 1;
+ else if (div > 16)
+ div = 16;
+
+ return parent_rate / (div * 2);
+}
+
+static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
+
+ rate = s3c2442_camif_upll_round(clk, rate);
+
+ camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3;
+
+ if (rate == parent_rate) {
+ camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL;
+ } else if ((parent_rate / rate) == 3) {
+ camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
+ camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3;
+ } else {
+ camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK;
+ camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
+ camdivn |= (((parent_rate / rate) / 2) - 1);
+ }
+
+ __raw_writel(camdivn, S3C2440_CAMDIVN);
+
+ return 0;
+}
+
+/* Extra S3C2442 clocks */
+
+static struct clk s3c2442_clk_cam = {
+ .name = "camif",
+ .id = -1,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2440_CLKCON_CAMERA,
+};
+
+static struct clk s3c2442_clk_cam_upll = {
+ .name = "camif-upll",
+ .id = -1,
+ .ops = &(struct clk_ops) {
+ .set_rate = s3c2442_camif_upll_setrate,
+ .round_rate = s3c2442_camif_upll_round,
+ },
+};
+
+static int s3c2442_clk_add(struct sys_device *sysdev)
+{
+ struct clk *clock_upll;
+ struct clk *clock_h;
+ struct clk *clock_p;
+
+ clock_p = clk_get(NULL, "pclk");
+ clock_h = clk_get(NULL, "hclk");
+ clock_upll = clk_get(NULL, "upll");
+
+ if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
+ printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
+ return -EINVAL;
+ }
+
+ s3c2442_clk_cam.parent = clock_h;
+ s3c2442_clk_cam_upll.parent = clock_upll;
+
+ s3c24xx_register_clock(&s3c2442_clk_cam);
+ s3c24xx_register_clock(&s3c2442_clk_cam_upll);
+
+ clk_disable(&s3c2442_clk_cam);
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2442_clk_driver = {
+ .add = s3c2442_clk_add,
+};
+
+static __init int s3c2442_clk_init(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver);
+}
+
+arch_initcall(s3c2442_clk_init);
+
+
static struct sys_device s3c2442_sysdev = {
.cls = &s3c2442_sysclass,
};
--
1.6.0.4
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH] ARM: S3C2440: Fix SMDK2440 SoC selection
2010-01-26 7:57 ` Ben Dooks
@ 2010-01-26 7:58 ` Ben Dooks
-1 siblings, 0 replies; 16+ messages in thread
From: Ben Dooks @ 2010-01-26 7:58 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: Ben Dooks
Fix the entries for SMDK2440 should have allowed for S3C2440 or S3C2440
SoC selection but this depended on ARCH_S3C2440 which has not been around
for a while.
Remove the dependency to allow this to be selected.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2440/Kconfig | 2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 5486929..45cab7a 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -105,14 +105,12 @@ config MACH_NEXCODER_2440
config SMDK2440_CPU2440
bool "SMDK2440 with S3C2440 CPU module"
- depends on ARCH_S3C2440
default y if ARCH_S3C2440
select S3C2440_XTAL_16934400
select CPU_S3C2440
config SMDK2440_CPU2442
bool "SMDM2440 with S3C2442 CPU module"
- depends on ARCH_S3C2440
select CPU_S3C2442
config MACH_AT2440EVB
--
1.6.0.4
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH] ARM: S3C2440: Fix SMDK2440 SoC selection
@ 2010-01-26 7:58 ` Ben Dooks
0 siblings, 0 replies; 16+ messages in thread
From: Ben Dooks @ 2010-01-26 7:58 UTC (permalink / raw)
To: linux-arm-kernel
Fix the entries for SMDK2440 should have allowed for S3C2440 or S3C2440
SoC selection but this depended on ARCH_S3C2440 which has not been around
for a while.
Remove the dependency to allow this to be selected.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2440/Kconfig | 2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 5486929..45cab7a 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -105,14 +105,12 @@ config MACH_NEXCODER_2440
config SMDK2440_CPU2440
bool "SMDK2440 with S3C2440 CPU module"
- depends on ARCH_S3C2440
default y if ARCH_S3C2440
select S3C2440_XTAL_16934400
select CPU_S3C2440
config SMDK2440_CPU2442
bool "SMDM2440 with S3C2442 CPU module"
- depends on ARCH_S3C2440
select CPU_S3C2442
config MACH_AT2440EVB
--
1.6.0.4
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH] ARM: S3C244X: Move S3C2442 code into S3C2440
2010-01-26 7:57 ` Ben Dooks
@ 2010-01-26 7:58 ` Ben Dooks
-1 siblings, 0 replies; 16+ messages in thread
From: Ben Dooks @ 2010-01-26 7:58 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: Ben Dooks
Move the remaining S3C2442 code into mach-s3c2440 as there is only one
file currently in there and these two SoCs are very similar.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2440/Kconfig | 12 ++++++++++++
arch/arm/mach-s3c2440/Makefile | 2 ++
arch/arm/{mach-s3c2442 => mach-s3c2440}/s3c2442.c | 0
arch/arm/mach-s3c2442/Kconfig | 11 -----------
4 files changed, 14 insertions(+), 11 deletions(-)
rename arch/arm/{mach-s3c2442 => mach-s3c2440}/s3c2442.c (100%)
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 45cab7a..f496385 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -15,6 +15,18 @@ config CPU_S3C2440
help
Support for S3C2440 Samsung Mobile CPU based systems.
+config CPU_S3C2442
+ bool
+ depends on ARCH_S3C2410
+ select CPU_ARM920T
+ select S3C2410_CLOCK
+ select S3C2410_GPIO
+ select S3C2410_PM if PM
+ select CPU_S3C244X
+ select CPU_LLSERIAL_S3C2440
+ help
+ Support for S3C2442 Samsung Mobile CPU based systems.
+
config S3C2440_DMA
bool
depends on ARCH_S3C2410 && CPU_S3C24405B
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index e51497c..e8412b3 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -10,6 +10,8 @@ obj-n :=
obj- :=
obj-$(CONFIG_CPU_S3C2440) += s3c2440.o dsc.o
+obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
+
obj-$(CONFIG_CPU_S3C2440) += irq.o
obj-$(CONFIG_CPU_S3C2440) += clock.o
obj-$(CONFIG_S3C2440_DMA) += dma.o
diff --git a/arch/arm/mach-s3c2442/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
similarity index 100%
rename from arch/arm/mach-s3c2442/s3c2442.c
rename to arch/arm/mach-s3c2440/s3c2442.c
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
index 4832cd6..29ef066 100644
--- a/arch/arm/mach-s3c2442/Kconfig
+++ b/arch/arm/mach-s3c2442/Kconfig
@@ -2,14 +2,3 @@
#
# Licensed under GPLv2
-config CPU_S3C2442
- bool
- depends on ARCH_S3C2410
- select CPU_ARM920T
- select S3C2410_CLOCK
- select S3C2410_GPIO
- select S3C2410_PM if PM
- select CPU_S3C244X
- select CPU_LLSERIAL_S3C2440
- help
- Support for S3C2442 Samsung Mobile CPU based systems.
--
1.6.0.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH] ARM: S3C244X: Move S3C2442 code into S3C2440
@ 2010-01-26 7:58 ` Ben Dooks
0 siblings, 0 replies; 16+ messages in thread
From: Ben Dooks @ 2010-01-26 7:58 UTC (permalink / raw)
To: linux-arm-kernel
Move the remaining S3C2442 code into mach-s3c2440 as there is only one
file currently in there and these two SoCs are very similar.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2440/Kconfig | 12 ++++++++++++
arch/arm/mach-s3c2440/Makefile | 2 ++
arch/arm/{mach-s3c2442 => mach-s3c2440}/s3c2442.c | 0
arch/arm/mach-s3c2442/Kconfig | 11 -----------
4 files changed, 14 insertions(+), 11 deletions(-)
rename arch/arm/{mach-s3c2442 => mach-s3c2440}/s3c2442.c (100%)
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 45cab7a..f496385 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -15,6 +15,18 @@ config CPU_S3C2440
help
Support for S3C2440 Samsung Mobile CPU based systems.
+config CPU_S3C2442
+ bool
+ depends on ARCH_S3C2410
+ select CPU_ARM920T
+ select S3C2410_CLOCK
+ select S3C2410_GPIO
+ select S3C2410_PM if PM
+ select CPU_S3C244X
+ select CPU_LLSERIAL_S3C2440
+ help
+ Support for S3C2442 Samsung Mobile CPU based systems.
+
config S3C2440_DMA
bool
depends on ARCH_S3C2410 && CPU_S3C24405B
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index e51497c..e8412b3 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -10,6 +10,8 @@ obj-n :=
obj- :=
obj-$(CONFIG_CPU_S3C2440) += s3c2440.o dsc.o
+obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
+
obj-$(CONFIG_CPU_S3C2440) += irq.o
obj-$(CONFIG_CPU_S3C2440) += clock.o
obj-$(CONFIG_S3C2440_DMA) += dma.o
diff --git a/arch/arm/mach-s3c2442/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
similarity index 100%
rename from arch/arm/mach-s3c2442/s3c2442.c
rename to arch/arm/mach-s3c2440/s3c2442.c
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
index 4832cd6..29ef066 100644
--- a/arch/arm/mach-s3c2442/Kconfig
+++ b/arch/arm/mach-s3c2442/Kconfig
@@ -2,14 +2,3 @@
#
# Licensed under GPLv2
-config CPU_S3C2442
- bool
- depends on ARCH_S3C2410
- select CPU_ARM920T
- select S3C2410_CLOCK
- select S3C2410_GPIO
- select S3C2410_PM if PM
- select CPU_S3C244X
- select CPU_LLSERIAL_S3C2440
- help
- Support for S3C2442 Samsung Mobile CPU based systems.
--
1.6.0.4
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH] ARM: S3C24XX: Remove old mach-s3c2442
2010-01-26 7:57 ` Ben Dooks
@ 2010-01-26 7:58 ` Ben Dooks
-1 siblings, 0 replies; 16+ messages in thread
From: Ben Dooks @ 2010-01-26 7:58 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: Ben Dooks
Remove the old mach-s3c2442 directory now all is merged into mach-s3c2440
and remove it from the arch/arm build process.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/Kconfig | 1 -
arch/arm/Makefile | 2 +-
arch/arm/mach-s3c2442/Kconfig | 4 ----
arch/arm/mach-s3c2442/Makefile | 15 ---------------
4 files changed, 1 insertions(+), 21 deletions(-)
delete mode 100644 arch/arm/mach-s3c2442/Kconfig
delete mode 100644 arch/arm/mach-s3c2442/Makefile
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3bc5169..63f726f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -794,7 +794,6 @@ source "arch/arm/mach-s3c2400/Kconfig"
source "arch/arm/mach-s3c2410/Kconfig"
source "arch/arm/mach-s3c2412/Kconfig"
source "arch/arm/mach-s3c2440/Kconfig"
-source "arch/arm/mach-s3c2442/Kconfig"
source "arch/arm/mach-s3c2443/Kconfig"
endif
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index bbcd512..893bcfc 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -158,7 +158,7 @@ machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_REALVIEW) := realview
machine-$(CONFIG_ARCH_RPC) := rpc
-machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2443
machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410
machine-$(CONFIG_ARCH_S5P6440) := s5p6440
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
deleted file mode 100644
index 29ef066..0000000
--- a/arch/arm/mach-s3c2442/Kconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
deleted file mode 100644
index 7e31ccd..0000000
--- a/arch/arm/mach-s3c2442/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-# arch/arm/mach-s3c2442/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
-
-# Machine support
-
--
1.6.0.4
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH] ARM: S3C24XX: Remove old mach-s3c2442
@ 2010-01-26 7:58 ` Ben Dooks
0 siblings, 0 replies; 16+ messages in thread
From: Ben Dooks @ 2010-01-26 7:58 UTC (permalink / raw)
To: linux-arm-kernel
Remove the old mach-s3c2442 directory now all is merged into mach-s3c2440
and remove it from the arch/arm build process.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/Kconfig | 1 -
arch/arm/Makefile | 2 +-
arch/arm/mach-s3c2442/Kconfig | 4 ----
arch/arm/mach-s3c2442/Makefile | 15 ---------------
4 files changed, 1 insertions(+), 21 deletions(-)
delete mode 100644 arch/arm/mach-s3c2442/Kconfig
delete mode 100644 arch/arm/mach-s3c2442/Makefile
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3bc5169..63f726f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -794,7 +794,6 @@ source "arch/arm/mach-s3c2400/Kconfig"
source "arch/arm/mach-s3c2410/Kconfig"
source "arch/arm/mach-s3c2412/Kconfig"
source "arch/arm/mach-s3c2440/Kconfig"
-source "arch/arm/mach-s3c2442/Kconfig"
source "arch/arm/mach-s3c2443/Kconfig"
endif
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index bbcd512..893bcfc 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -158,7 +158,7 @@ machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_REALVIEW) := realview
machine-$(CONFIG_ARCH_RPC) := rpc
-machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2443
machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410
machine-$(CONFIG_ARCH_S5P6440) := s5p6440
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
deleted file mode 100644
index 29ef066..0000000
--- a/arch/arm/mach-s3c2442/Kconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
deleted file mode 100644
index 7e31ccd..0000000
--- a/arch/arm/mach-s3c2442/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-# arch/arm/mach-s3c2442/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
-
-# Machine support
-
--
1.6.0.4
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH] ARM: S3C24XX: Move S3C2440/S3C2442 support from plat-s3c24xx to mach-s3c2440
2010-01-26 7:57 ` Ben Dooks
@ 2010-01-26 7:58 ` Ben Dooks
-1 siblings, 0 replies; 16+ messages in thread
From: Ben Dooks @ 2010-01-26 7:58 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: Ben Dooks
Remove the old common S3C2440 and S3C2442 SoC support from plat-s3c24xx
into mach-s3c2440 now this directory is serving both SoCs.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2440/Kconfig | 42 ++++++++++++++++++++
arch/arm/mach-s3c2440/Makefile | 8 ++++
.../{plat-s3c24xx => mach-s3c2440}/s3c244x-clock.c | 0
.../{plat-s3c24xx => mach-s3c2440}/s3c244x-irq.c | 0
arch/arm/{plat-s3c24xx => mach-s3c2440}/s3c244x.c | 2 +-
arch/arm/plat-s3c24xx/Kconfig | 41 -------------------
arch/arm/plat-s3c24xx/Makefile | 7 ---
arch/arm/plat-s3c24xx/cpu.c | 2 +-
arch/arm/plat-s3c24xx/{ => include/plat}/s3c244x.h | 2 +-
9 files changed, 53 insertions(+), 51 deletions(-)
rename arch/arm/{plat-s3c24xx => mach-s3c2440}/s3c244x-clock.c (100%)
rename arch/arm/{plat-s3c24xx => mach-s3c2440}/s3c244x-irq.c (100%)
rename arch/arm/{plat-s3c24xx => mach-s3c2440}/s3c244x.c (99%)
rename arch/arm/plat-s3c24xx/{ => include/plat}/s3c244x.h (92%)
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index f496385..7f46526 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -27,6 +27,48 @@ config CPU_S3C2442
help
Support for S3C2442 Samsung Mobile CPU based systems.
+config CPU_S3C244X
+ bool
+ depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
+ help
+ Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
+
+
+
+config S3C2440_CPUFREQ
+ bool "S3C2440/S3C2442 CPU Frequency scaling support"
+ depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+ select S3C2410_CPUFREQ_UTILS
+ default y
+ help
+ CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
+config S3C2440_XTAL_12000000
+ bool
+ help
+ Indicate that the build needs to support 12MHz system
+ crystal.
+
+config S3C2440_XTAL_16934400
+ bool
+ help
+ Indicate that the build needs to support 16.9344MHz system
+ crystal.
+
+config S3C2440_PLL_12000000
+ bool
+ depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+ default y if CPU_FREQ_S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+ bool
+ depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+ default y if CPU_FREQ_S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
config S3C2440_DMA
bool
depends on ARCH_S3C2410 && CPU_S3C24405B
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index e8412b3..c85ba32 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -16,6 +16,14 @@ obj-$(CONFIG_CPU_S3C2440) += irq.o
obj-$(CONFIG_CPU_S3C2440) += clock.o
obj-$(CONFIG_S3C2440_DMA) += dma.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
+obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
+
+obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
+
# Machine support
obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c
similarity index 100%
rename from arch/arm/plat-s3c24xx/s3c244x-clock.c
rename to arch/arm/mach-s3c2440/s3c244x-clock.c
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c
similarity index 100%
rename from arch/arm/plat-s3c24xx/s3c244x-irq.c
rename to arch/arm/mach-s3c2440/s3c244x-irq.c
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
similarity index 99%
rename from arch/arm/plat-s3c24xx/s3c244x.c
rename to arch/arm/mach-s3c2440/s3c244x.c
index 12623a4..46e13db 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c2440/s3c244x.c
@@ -39,7 +39,7 @@
#include <plat/s3c2410.h>
#include <plat/s3c2440.h>
-#include "s3c244x.h"
+#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index a806f35..0cc5760 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -27,46 +27,6 @@ config S3C24XX_DCLK
help
Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
-config CPU_S3C244X
- bool
- depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
- help
- Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
-
-config S3C2440_CPUFREQ
- bool "S3C2440/S3C2442 CPU Frequency scaling support"
- depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
- select S3C2410_CPUFREQ_UTILS
- default y
- help
- CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
-
-config S3C2440_XTAL_12000000
- bool
- help
- Indicate that the build needs to support 12MHz system
- crystal.
-
-config S3C2440_XTAL_16934400
- bool
- help
- Indicate that the build needs to support 16.9344MHz system
- crystal.
-
-config S3C2440_PLL_12000000
- bool
- depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
- default y if CPU_FREQ_S3C24XX_PLL
- help
- PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
-
-config S3C2440_PLL_16934400
- bool
- depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
- default y if CPU_FREQ_S3C24XX_PLL
- help
- PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-
config S3C24XX_PWM
bool "PWM device support"
select HAVE_PWM
@@ -74,7 +34,6 @@ config S3C24XX_PWM
Support for exporting the PWM timer blocks via the pwm device
system.
-
# gpio configurations
config S3C24XX_GPIO_EXTRA
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index e010026..c2237c4 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -25,13 +25,6 @@ obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
# Architecture dependant builds
-obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
-obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
-obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
-obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
-
obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += irq-pm.o
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 4af9dd9..6ecf87a 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -49,7 +49,7 @@
#include <plat/s3c2400.h>
#include <plat/s3c2410.h>
#include <plat/s3c2412.h>
-#include "s3c244x.h"
+#include <plat/s3c244x.h>
#include <plat/s3c2440.h>
#include <plat/s3c2442.h>
#include <plat/s3c2443.h>
diff --git a/arch/arm/plat-s3c24xx/s3c244x.h b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
similarity index 92%
rename from arch/arm/plat-s3c24xx/s3c244x.h
rename to arch/arm/plat-s3c24xx/include/plat/s3c244x.h
index 6aab5ea..8da0904 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/s3c244x.h
+/* linux/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
*
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
--
1.6.0.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH] ARM: S3C24XX: Move S3C2440/S3C2442 support from plat-s3c24xx to mach-s3c2440
@ 2010-01-26 7:58 ` Ben Dooks
0 siblings, 0 replies; 16+ messages in thread
From: Ben Dooks @ 2010-01-26 7:58 UTC (permalink / raw)
To: linux-arm-kernel
Remove the old common S3C2440 and S3C2442 SoC support from plat-s3c24xx
into mach-s3c2440 now this directory is serving both SoCs.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2440/Kconfig | 42 ++++++++++++++++++++
arch/arm/mach-s3c2440/Makefile | 8 ++++
.../{plat-s3c24xx => mach-s3c2440}/s3c244x-clock.c | 0
.../{plat-s3c24xx => mach-s3c2440}/s3c244x-irq.c | 0
arch/arm/{plat-s3c24xx => mach-s3c2440}/s3c244x.c | 2 +-
arch/arm/plat-s3c24xx/Kconfig | 41 -------------------
arch/arm/plat-s3c24xx/Makefile | 7 ---
arch/arm/plat-s3c24xx/cpu.c | 2 +-
arch/arm/plat-s3c24xx/{ => include/plat}/s3c244x.h | 2 +-
9 files changed, 53 insertions(+), 51 deletions(-)
rename arch/arm/{plat-s3c24xx => mach-s3c2440}/s3c244x-clock.c (100%)
rename arch/arm/{plat-s3c24xx => mach-s3c2440}/s3c244x-irq.c (100%)
rename arch/arm/{plat-s3c24xx => mach-s3c2440}/s3c244x.c (99%)
rename arch/arm/plat-s3c24xx/{ => include/plat}/s3c244x.h (92%)
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index f496385..7f46526 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -27,6 +27,48 @@ config CPU_S3C2442
help
Support for S3C2442 Samsung Mobile CPU based systems.
+config CPU_S3C244X
+ bool
+ depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
+ help
+ Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
+
+
+
+config S3C2440_CPUFREQ
+ bool "S3C2440/S3C2442 CPU Frequency scaling support"
+ depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+ select S3C2410_CPUFREQ_UTILS
+ default y
+ help
+ CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
+config S3C2440_XTAL_12000000
+ bool
+ help
+ Indicate that the build needs to support 12MHz system
+ crystal.
+
+config S3C2440_XTAL_16934400
+ bool
+ help
+ Indicate that the build needs to support 16.9344MHz system
+ crystal.
+
+config S3C2440_PLL_12000000
+ bool
+ depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+ default y if CPU_FREQ_S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+ bool
+ depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+ default y if CPU_FREQ_S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
config S3C2440_DMA
bool
depends on ARCH_S3C2410 && CPU_S3C24405B
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index e8412b3..c85ba32 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -16,6 +16,14 @@ obj-$(CONFIG_CPU_S3C2440) += irq.o
obj-$(CONFIG_CPU_S3C2440) += clock.o
obj-$(CONFIG_S3C2440_DMA) += dma.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
+obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
+
+obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
+
# Machine support
obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c
similarity index 100%
rename from arch/arm/plat-s3c24xx/s3c244x-clock.c
rename to arch/arm/mach-s3c2440/s3c244x-clock.c
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c
similarity index 100%
rename from arch/arm/plat-s3c24xx/s3c244x-irq.c
rename to arch/arm/mach-s3c2440/s3c244x-irq.c
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
similarity index 99%
rename from arch/arm/plat-s3c24xx/s3c244x.c
rename to arch/arm/mach-s3c2440/s3c244x.c
index 12623a4..46e13db 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c2440/s3c244x.c
@@ -39,7 +39,7 @@
#include <plat/s3c2410.h>
#include <plat/s3c2440.h>
-#include "s3c244x.h"
+#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index a806f35..0cc5760 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -27,46 +27,6 @@ config S3C24XX_DCLK
help
Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
-config CPU_S3C244X
- bool
- depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
- help
- Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
-
-config S3C2440_CPUFREQ
- bool "S3C2440/S3C2442 CPU Frequency scaling support"
- depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
- select S3C2410_CPUFREQ_UTILS
- default y
- help
- CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
-
-config S3C2440_XTAL_12000000
- bool
- help
- Indicate that the build needs to support 12MHz system
- crystal.
-
-config S3C2440_XTAL_16934400
- bool
- help
- Indicate that the build needs to support 16.9344MHz system
- crystal.
-
-config S3C2440_PLL_12000000
- bool
- depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
- default y if CPU_FREQ_S3C24XX_PLL
- help
- PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
-
-config S3C2440_PLL_16934400
- bool
- depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
- default y if CPU_FREQ_S3C24XX_PLL
- help
- PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-
config S3C24XX_PWM
bool "PWM device support"
select HAVE_PWM
@@ -74,7 +34,6 @@ config S3C24XX_PWM
Support for exporting the PWM timer blocks via the pwm device
system.
-
# gpio configurations
config S3C24XX_GPIO_EXTRA
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index e010026..c2237c4 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -25,13 +25,6 @@ obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
# Architecture dependant builds
-obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
-obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
-obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
-obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
-
obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += irq-pm.o
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 4af9dd9..6ecf87a 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -49,7 +49,7 @@
#include <plat/s3c2400.h>
#include <plat/s3c2410.h>
#include <plat/s3c2412.h>
-#include "s3c244x.h"
+#include <plat/s3c244x.h>
#include <plat/s3c2440.h>
#include <plat/s3c2442.h>
#include <plat/s3c2443.h>
diff --git a/arch/arm/plat-s3c24xx/s3c244x.h b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
similarity index 92%
rename from arch/arm/plat-s3c24xx/s3c244x.h
rename to arch/arm/plat-s3c24xx/include/plat/s3c244x.h
index 6aab5ea..8da0904 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/s3c244x.h
+/* linux/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
*
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
--
1.6.0.4
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH] ARM: S3C244X: Merge <plat/s3c2440.h> and <plat/s3c2442.h> into <plat/s3c244x.h>
2010-01-26 7:57 ` Ben Dooks
@ 2010-01-26 7:58 ` Ben Dooks
-1 siblings, 0 replies; 16+ messages in thread
From: Ben Dooks @ 2010-01-26 7:58 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: Ben Dooks
Merge these two headers into one.
Note, correct fault in mach-smdk2443.h including the wrong header.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2440/dsc.c | 2 +-
arch/arm/mach-s3c2440/mach-nexcoder.c | 2 +-
arch/arm/mach-s3c2440/mach-smdk2440.c | 2 +-
arch/arm/mach-s3c2440/s3c2440.c | 2 +-
arch/arm/mach-s3c2440/s3c244x.c | 1 -
arch/arm/mach-s3c2443/mach-smdk2443.c | 2 +-
arch/arm/plat-s3c24xx/cpu.c | 2 --
arch/arm/plat-s3c24xx/include/plat/s3c2440.h | 17 -----------------
arch/arm/plat-s3c24xx/include/plat/s3c2442.h | 17 -----------------
arch/arm/plat-s3c24xx/include/plat/s3c244x.h | 12 ++++++++++++
10 files changed, 17 insertions(+), 42 deletions(-)
delete mode 100644 arch/arm/plat-s3c24xx/include/plat/s3c2440.h
delete mode 100644 arch/arm/plat-s3c24xx/include/plat/s3c2442.h
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
index 5540442..9ea66e3 100644
--- a/arch/arm/mach-s3c2440/dsc.c
+++ b/arch/arm/mach-s3c2440/dsc.c
@@ -28,7 +28,7 @@
#include <mach/regs-dsc.h>
#include <plat/cpu.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
int s3c2440_set_dsc(unsigned int pin, unsigned int value)
{
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 86a243b..3420415 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -41,7 +41,7 @@
#include <plat/iic.h>
#include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index df3e9a3..3ac3d63 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -40,7 +40,7 @@
#include <plat/iic.h>
#include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index ac1f7ea..2b68f7e 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -29,9 +29,9 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <plat/s3c2440.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/s3c244x.h>
static struct sys_device s3c2440_sysdev = {
.cls = &s3c2440_sysclass,
diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
index 46e13db..5e4a97e 100644
--- a/arch/arm/mach-s3c2440/s3c244x.c
+++ b/arch/arm/mach-s3c2440/s3c244x.c
@@ -38,7 +38,6 @@
#include <mach/regs-dsc.h>
#include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 039a462..d65afde 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -40,7 +40,7 @@
#include <plat/iic.h>
#include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 6ecf87a..9ca64df 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -50,8 +50,6 @@
#include <plat/s3c2410.h>
#include <plat/s3c2412.h>
#include <plat/s3c244x.h>
-#include <plat/s3c2440.h>
-#include <plat/s3c2442.h>
#include <plat/s3c2443.h>
/* table of supported CPUs */
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h b/arch/arm/plat-s3c24xx/include/plat/s3c2440.h
deleted file mode 100644
index 107853b..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2440.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2440 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2440
-extern int s3c2440_init(void);
-#else
-#define s3c2440_init NULL
-#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h b/arch/arm/plat-s3c24xx/include/plat/s3c2442.h
deleted file mode 100644
index 451a23a..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2442.h
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2442
-extern int s3c2442_init(void);
-#else
-#define s3c2442_init NULL
-#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
index 8da0904..307248d 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
@@ -23,3 +23,15 @@ extern void s3c244x_init_clocks(int xtal);
#define s3c244x_init_uarts NULL
#define s3c244x_map_io NULL
#endif
+
+#ifdef CONFIG_CPU_S3C2440
+extern int s3c2440_init(void);
+#else
+#define s3c2440_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2442
+extern int s3c2442_init(void);
+#else
+#define s3c2442_init NULL
+#endif
--
1.6.0.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH] ARM: S3C244X: Merge <plat/s3c2440.h> and <plat/s3c2442.h> into <plat/s3c244x.h>
@ 2010-01-26 7:58 ` Ben Dooks
0 siblings, 0 replies; 16+ messages in thread
From: Ben Dooks @ 2010-01-26 7:58 UTC (permalink / raw)
To: linux-arm-kernel
Merge these two headers into one.
Note, correct fault in mach-smdk2443.h including the wrong header.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2440/dsc.c | 2 +-
arch/arm/mach-s3c2440/mach-nexcoder.c | 2 +-
arch/arm/mach-s3c2440/mach-smdk2440.c | 2 +-
arch/arm/mach-s3c2440/s3c2440.c | 2 +-
arch/arm/mach-s3c2440/s3c244x.c | 1 -
arch/arm/mach-s3c2443/mach-smdk2443.c | 2 +-
arch/arm/plat-s3c24xx/cpu.c | 2 --
arch/arm/plat-s3c24xx/include/plat/s3c2440.h | 17 -----------------
arch/arm/plat-s3c24xx/include/plat/s3c2442.h | 17 -----------------
arch/arm/plat-s3c24xx/include/plat/s3c244x.h | 12 ++++++++++++
10 files changed, 17 insertions(+), 42 deletions(-)
delete mode 100644 arch/arm/plat-s3c24xx/include/plat/s3c2440.h
delete mode 100644 arch/arm/plat-s3c24xx/include/plat/s3c2442.h
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
index 5540442..9ea66e3 100644
--- a/arch/arm/mach-s3c2440/dsc.c
+++ b/arch/arm/mach-s3c2440/dsc.c
@@ -28,7 +28,7 @@
#include <mach/regs-dsc.h>
#include <plat/cpu.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
int s3c2440_set_dsc(unsigned int pin, unsigned int value)
{
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 86a243b..3420415 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -41,7 +41,7 @@
#include <plat/iic.h>
#include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index df3e9a3..3ac3d63 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -40,7 +40,7 @@
#include <plat/iic.h>
#include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index ac1f7ea..2b68f7e 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -29,9 +29,9 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <plat/s3c2440.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/s3c244x.h>
static struct sys_device s3c2440_sysdev = {
.cls = &s3c2440_sysclass,
diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
index 46e13db..5e4a97e 100644
--- a/arch/arm/mach-s3c2440/s3c244x.c
+++ b/arch/arm/mach-s3c2440/s3c244x.c
@@ -38,7 +38,6 @@
#include <mach/regs-dsc.h>
#include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 039a462..d65afde 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -40,7 +40,7 @@
#include <plat/iic.h>
#include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 6ecf87a..9ca64df 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -50,8 +50,6 @@
#include <plat/s3c2410.h>
#include <plat/s3c2412.h>
#include <plat/s3c244x.h>
-#include <plat/s3c2440.h>
-#include <plat/s3c2442.h>
#include <plat/s3c2443.h>
/* table of supported CPUs */
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h b/arch/arm/plat-s3c24xx/include/plat/s3c2440.h
deleted file mode 100644
index 107853b..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2440.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2440 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2440
-extern int s3c2440_init(void);
-#else
-#define s3c2440_init NULL
-#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h b/arch/arm/plat-s3c24xx/include/plat/s3c2442.h
deleted file mode 100644
index 451a23a..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2442.h
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2442
-extern int s3c2442_init(void);
-#else
-#define s3c2442_init NULL
-#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
index 8da0904..307248d 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
@@ -23,3 +23,15 @@ extern void s3c244x_init_clocks(int xtal);
#define s3c244x_init_uarts NULL
#define s3c244x_map_io NULL
#endif
+
+#ifdef CONFIG_CPU_S3C2440
+extern int s3c2440_init(void);
+#else
+#define s3c2440_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2442
+extern int s3c2442_init(void);
+#else
+#define s3c2442_init NULL
+#endif
--
1.6.0.4
^ permalink raw reply related [flat|nested] 16+ messages in thread