From: Kevin Hilman <khilman@deeprootsystems.com> To: linux-omap@vger.kernel.org Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 5/7] OMAP3: RX-51: Pass cpu idle parameters Date: Wed, 17 Feb 2010 18:02:28 -0600 [thread overview] Message-ID: <1266451350-4480-6-git-send-email-khilman@deeprootsystems.com> (raw) In-Reply-To: <1266451350-4480-1-git-send-email-khilman@deeprootsystems.com> From: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Pass cpuidle parameters for RX-51. Numbers based on measurements made in October 2009 for PM optimized kernel with CPU freq enabled. Assumes OPP2 (main idle OPP, and worst case latencies). Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> --- arch/arm/mach-omap2/board-rx51.c | 19 +++++++++++++++++++ 1 files changed, 19 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 26b70da..acfb898 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -31,6 +31,7 @@ #include <plat/usb.h> #include "mux.h" +#include "pm.h" #define RX51_GPIO_SLEEP_IND 162 @@ -56,6 +57,23 @@ static struct platform_device leds_gpio = { }, }; +static struct cpuidle_params rx51_cpuidle_params[] = { + /* C1 */ + {1, 110, 162, 5}, + /* C2 */ + {1, 106, 180, 309}, + /* C3 */ + {0, 107, 410, 46057}, + /* C4 */ + {0, 121, 3374, 46057}, + /* C5 */ + {1, 855, 1146, 46057}, + /* C6 */ + {0, 7580, 4134, 484329}, + /* C7 */ + {1, 7505, 15274, 484329}, +}; + static struct omap_lcd_config rx51_lcd_config = { .ctrl_name = "internal", }; @@ -85,6 +103,7 @@ static void __init rx51_init_irq(void) omap_board_config = rx51_config; omap_board_config_size = ARRAY_SIZE(rx51_config); + omap3_pm_init_cpuidle(rx51_cpuidle_params); sdrc_params = rx51_get_sdram_timings(); omap2_init_common_hw(sdrc_params, sdrc_params); omap_init_irq(); -- 1.6.6
WARNING: multiple messages have this Message-ID (diff)
From: khilman@deeprootsystems.com (Kevin Hilman) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 5/7] OMAP3: RX-51: Pass cpu idle parameters Date: Wed, 17 Feb 2010 18:02:28 -0600 [thread overview] Message-ID: <1266451350-4480-6-git-send-email-khilman@deeprootsystems.com> (raw) In-Reply-To: <1266451350-4480-1-git-send-email-khilman@deeprootsystems.com> From: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Pass cpuidle parameters for RX-51. Numbers based on measurements made in October 2009 for PM optimized kernel with CPU freq enabled. Assumes OPP2 (main idle OPP, and worst case latencies). Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> --- arch/arm/mach-omap2/board-rx51.c | 19 +++++++++++++++++++ 1 files changed, 19 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 26b70da..acfb898 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -31,6 +31,7 @@ #include <plat/usb.h> #include "mux.h" +#include "pm.h" #define RX51_GPIO_SLEEP_IND 162 @@ -56,6 +57,23 @@ static struct platform_device leds_gpio = { }, }; +static struct cpuidle_params rx51_cpuidle_params[] = { + /* C1 */ + {1, 110, 162, 5}, + /* C2 */ + {1, 106, 180, 309}, + /* C3 */ + {0, 107, 410, 46057}, + /* C4 */ + {0, 121, 3374, 46057}, + /* C5 */ + {1, 855, 1146, 46057}, + /* C6 */ + {0, 7580, 4134, 484329}, + /* C7 */ + {1, 7505, 15274, 484329}, +}; + static struct omap_lcd_config rx51_lcd_config = { .ctrl_name = "internal", }; @@ -85,6 +103,7 @@ static void __init rx51_init_irq(void) omap_board_config = rx51_config; omap_board_config_size = ARRAY_SIZE(rx51_config); + omap3_pm_init_cpuidle(rx51_cpuidle_params); sdrc_params = rx51_get_sdram_timings(); omap2_init_common_hw(sdrc_params, sdrc_params); omap_init_irq(); -- 1.6.6
next prev parent reply other threads:[~2010-02-18 0:02 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2010-02-18 0:02 [PATCH 0/7] OMAP PM updates for 2.6.34 Kevin Hilman 2010-02-18 0:02 ` Kevin Hilman 2010-02-18 0:02 ` [PATCH 1/7] OMAP3: cpuidle: Update statistics for correct state Kevin Hilman 2010-02-18 0:02 ` Kevin Hilman 2010-02-18 0:02 ` [PATCH 2/7] OMAP3: cpuidle: configure latencies/thresholds from board file Kevin Hilman 2010-02-18 0:02 ` Kevin Hilman 2010-02-18 0:02 ` [PATCH 3/7] OMAP3: cpuidle: Add valid field into C-state parameter passing Kevin Hilman 2010-02-18 0:02 ` Kevin Hilman 2010-02-18 0:02 ` [PATCH 4/7] OMAP3: RX-51: support sleep indicator LEDs Kevin Hilman 2010-02-18 0:02 ` Kevin Hilman 2010-02-18 0:02 ` Kevin Hilman [this message] 2010-02-18 0:02 ` [PATCH 5/7] OMAP3: RX-51: Pass cpu idle parameters Kevin Hilman 2010-02-18 0:02 ` [PATCH 6/7] OMAP3: PM: add scratchpad locking function Kevin Hilman 2010-02-18 0:02 ` Kevin Hilman 2010-02-18 0:02 ` [PATCH 7/7] OMAP3: PM: Added support for L2 aux ctrl register save and restore Kevin Hilman 2010-02-18 0:02 ` Kevin Hilman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1266451350-4480-6-git-send-email-khilman@deeprootsystems.com \ --to=khilman@deeprootsystems.com \ --cc=kalle.jokiniemi@digia.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.