hackbench regression due to commit 9dfc6e68bfe6e

hackbench regression due to commit 9dfc6e68bfe6e

[Alex Shi]

The hackbench benchmark dropped about 3~7% on our 2 sockets NHM machine
on 34-rc1 kernel. We find it is due to commit 9dfc6e68bfe6e, 

commit 9dfc6e68bfe6ee452efb1a4e9ca26a9007f2b864
Author: Christoph Lameter <cl@linux-foundation.org>
Date:   Fri Dec 18 16:26:20 2009 -0600

    SLUB: Use this_cpu operations in slub
    
The hackbench is prepared hundreds pair of processes/threads. And each
of pair of processes consists of a receiver and a sender. After all
pairs created and ready with a few memory block (by malloc), hackbench
let the sender do appointed times sending to receiver via socket, then
wait all pairs finished. The total sending running time is the indicator
of this benchmark. The less the better.  
The socket send/receiver generate lots of slub alloc/free. slabinfo
command show the following slub get huge increase from about 81412344 to
141412497, after command "backbench 150 thread 1000" running.

Name                   Objects      Alloc       Free   %Fast Fallb O
:t-0001024                 870  141412497  141412132  94   1     0 3
:t-0000256                1607  141225312  141224177  94   1     0 1 


Via perf tool I collected the L1 data cache miss info of comamnd:
"./hackbench 150 thread 100"

On 33-rc1, about 1303976612 time L1 Dcache missing

On 9dfc6, about 1360574760 times L1 Dcache missing

I also disassemble the mm/built.o file, but seems no special change. 


BRG
Alex 

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Christoph Lameter]

On Thu, 25 Mar 2010, Alex Shi wrote:

>     SLUB: Use this_cpu operations in slub
>
> The hackbench is prepared hundreds pair of processes/threads. And each
> of pair of processes consists of a receiver and a sender. After all
> pairs created and ready with a few memory block (by malloc), hackbench
> let the sender do appointed times sending to receiver via socket, then
> wait all pairs finished. The total sending running time is the indicator
> of this benchmark. The less the better.

> The socket send/receiver generate lots of slub alloc/free. slabinfo
> command show the following slub get huge increase from about 81412344 to
> 141412497, after command "backbench 150 thread 1000" running.

The number of frees is different? From 81 mio to 141 mio? Are you sure it
was the same load?

> Name                   Objects      Alloc       Free   %Fast Fallb O
> :t-0001024                 870  141412497  141412132  94   1     0 3
> :t-0000256                1607  141225312  141224177  94   1     0 1
>
>
> Via perf tool I collected the L1 data cache miss info of comamnd:
> "./hackbench 150 thread 100"
>
> On 33-rc1, about 1303976612 time L1 Dcache missing
>
> On 9dfc6, about 1360574760 times L1 Dcache missing

I hope this is the same load?

What debugging options did you use? We are now using per cpu operations in
the hot paths. Enabling debugging for per cpu ops could decrease your
performance now. Have a look at a dissassembly of kfree() to verify that
there is no instrumentation.

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Alex Shi]

On Thu, 2010-03-25 at 22:49 +0800, Christoph Lameter wrote:
> On Thu, 25 Mar 2010, Alex Shi wrote:
> 
> >     SLUB: Use this_cpu operations in slub
> >
> > The hackbench is prepared hundreds pair of processes/threads. And each
> > of pair of processes consists of a receiver and a sender. After all
> > pairs created and ready with a few memory block (by malloc), hackbench
> > let the sender do appointed times sending to receiver via socket, then
> > wait all pairs finished. The total sending running time is the indicator
> > of this benchmark. The less the better.
> 
> > The socket send/receiver generate lots of slub alloc/free. slabinfo
> > command show the following slub get huge increase from about 81412344 to
> > 141412497, after command "backbench 150 thread 1000" running.
> 
> The number of frees is different? From 81 mio to 141 mio? Are you sure it
> was the same load?
The slub free number has similar increase, the following is the data
before testing:
name                   Objects      Alloc       Free   %Fast Fallb Onn
:t-0001024                 855   81412344   81411981  93   1     0 3
:t-0000256                1540   81224970   81223835  93   1     0 1

I am sure there is no effective task running when I do testing. 

Just for this info, CONFIG_SLUB_STATS enabled.

> 
> > Name                   Objects      Alloc       Free   %Fast Fallb O
> > :t-0001024                 870  141412497  141412132  94   1     0 3
> > :t-0000256                1607  141225312  141224177  94   1     0 1
> >
> >
> > Via perf tool I collected the L1 data cache miss info of comamnd:
> > "./hackbench 150 thread 100"
> >
> > On 33-rc1, about 1303976612 time L1 Dcache missing
> >
> > On 9dfc6, about 1360574760 times L1 Dcache missing
> 
> I hope this is the same load?
for the same load parameter: ./hackbench 150 thread 1000
on 33-rc1, about 10649258360 times L1 Dcache missing
on 9dfc6, about 11061002507 times L1 Dcahce missing

For this this info, without CONFIG_SLUB_STATS and slub_debug is close. 

> 
> What debugging options did you use? We are now using per cpu operations in
> the hot paths. Enabling debugging for per cpu ops could decrease your
> performance now. Have a look at a dissassembly of kfree() to verify that
> there is no instrumentation.
> 
Basically, slub_debug never opened in booting, some SLUB related kernel
config is here:
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB=y
#CONFIG_SLUB_DEBUG_ON is not set

I just dissemble kfree, but whether the KMEMTRACE enabled or not, the
trace_kfree code stay in kfree function, and in my testing the debugfs
are not mounted.  

> 

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Zhang, Yanmin]

On Fri, 2010-03-26 at 10:35 +0800, Alex Shi wrote:
> On Thu, 2010-03-25 at 22:49 +0800, Christoph Lameter wrote:
> > On Thu, 25 Mar 2010, Alex Shi wrote:
> > 
> > >     SLUB: Use this_cpu operations in slub
> > >
> > > The hackbench is prepared hundreds pair of processes/threads. And each
> > > of pair of processes consists of a receiver and a sender. After all
> > > pairs created and ready with a few memory block (by malloc), hackbench
> > > let the sender do appointed times sending to receiver via socket, then
> > > wait all pairs finished. The total sending running time is the indicator
> > > of this benchmark. The less the better.
> > 
> > > The socket send/receiver generate lots of slub alloc/free. slabinfo
> > > command show the following slub get huge increase from about 81412344 to
> > > 141412497, after command "backbench 150 thread 1000" running.
> > 
> > The number of frees is different? From 81 mio to 141 mio? Are you sure it
> > was the same load?
> The slub free number has similar increase, the following is the data
> before testing:
> name                   Objects      Alloc       Free   %Fast Fallb Onn
> :t-0001024                 855   81412344   81411981  93   1     0 3
> :t-0000256                1540   81224970   81223835  93   1     0 1
> 
> I am sure there is no effective task running when I do testing. 
> 
> Just for this info, CONFIG_SLUB_STATS enabled.
> 
> > 
> > > Name                   Objects      Alloc       Free   %Fast Fallb O
> > > :t-0001024                 870  141412497  141412132  94   1     0 3
> > > :t-0000256                1607  141225312  141224177  94   1     0 1
> > >
> > >
> > > Via perf tool I collected the L1 data cache miss info of comamnd:
> > > "./hackbench 150 thread 100"
> > >
> > > On 33-rc1, about 1303976612 time L1 Dcache missing
> > >
> > > On 9dfc6, about 1360574760 times L1 Dcache missing
> > 
> > I hope this is the same load?
> for the same load parameter: ./hackbench 150 thread 1000
> on 33-rc1, about 10649258360 times L1 Dcache missing
> on 9dfc6, about 11061002507 times L1 Dcahce missing
> 
> For this this info, without CONFIG_SLUB_STATS and slub_debug is close. 
> 
> > 
> > What debugging options did you use? We are now using per cpu operations in
> > the hot paths. Enabling debugging for per cpu ops could decrease your
> > performance now. Have a look at a dissassembly of kfree() to verify that
> > there is no instrumentation.
> > 
> Basically, slub_debug never opened in booting, some SLUB related kernel
> config is here:
> CONFIG_SLUB_DEBUG=y
> CONFIG_SLUB=y
> #CONFIG_SLUB_DEBUG_ON is not set
> 
> I just dissemble kfree, but whether the KMEMTRACE enabled or not, the
> trace_kfree code stay in kfree function, and in my testing the debugfs
> are not mounted.  

Christoph,

I suspect the moving of place of cpu_slab in kmem_cache causes the new cache
miss. But when I move it to the tail of the structure, kernel always panic when
booting. Perhaps there is another potential bug?

---
Mount-cache hash table entries: 256
general protection fault: 0000 [#1] SMP
last sysfs file:
CPU 0
Pid: 0, comm: swapper Not tainted 2.6.33-rc1-this_cpu #1 X8DTN/X8DTN
RIP: 0010:[<ffffffff810c5041>]  [<ffffffff810c5041>] kmem_cache_alloc+0x58/0xf7
RSP: 0000:ffffffff81a01df8  EFLAGS: 00010083
RAX: ffff8800bec02220 RBX: ffffffff81c19180 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 00000000000006ae RDI: ffffffff818031ee
RBP: ffff8800bec02000 R08: ffff1000e6e02220 R09: 0000000000000002
R10: ffff88000001b9f0 R11: ffff88000001baf8 R12: 00000000000080d0
R13: 0000000000000296 R14: 00000000000080d0 R15: ffffffff8126b0be
FS:  0000000000000000(0000) GS:ffff880028200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 0000000001a55000 CR4: 00000000000006b0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 0, threadinfo ffffffff81a00000, task ffffffff81a5d020)
Stack:
 0000000000000010 ffffffff81a01e20 ffff880100002038 ffffffff81c19180
<0> 00000000000080d0 ffffffff81c19198 0000000000400000 ffffffff81836aca
<0> 0000000000000000 ffffffff8126b0be 0000000000000296 00000000000000d0
Call Trace:
 [<ffffffff8126b0be>] ? idr_pre_get+0x29/0x6d
 [<ffffffff8126b116>] ? ida_pre_get+0x14/0xba
 [<ffffffff810e19a1>] ? alloc_vfsmnt+0x3c/0x166
 [<ffffffff810cdd0e>] ? vfs_kern_mount+0x32/0x15b
 [<ffffffff81b22c41>] ? sysfs_init+0x55/0xae
 [<ffffffff81b21ce1>] ? mnt_init+0x9b/0x179
 [<ffffffff81b2194e>] ? vfs_caches_init+0x105/0x115
 [<ffffffff81b07c03>] ? start_kernel+0x32e/0x370

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Christoph Lameter]

On Thu, 1 Apr 2010, Zhang, Yanmin wrote:

> I suspect the moving of place of cpu_slab in kmem_cache causes the new cache
> miss. But when I move it to the tail of the structure, kernel always panic when
> booting. Perhaps there is another potential bug?

Why would that cause an additional cache miss?


The node array is following at the end of the structure. If you want to
move it down then it needs to be placed before the node field.

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Zhang, Yanmin]

On Thu, 2010-04-01 at 10:53 -0500, Christoph Lameter wrote:
> On Thu, 1 Apr 2010, Zhang, Yanmin wrote:
> 
> > I suspect the moving of place of cpu_slab in kmem_cache causes the new cache
> > miss. But when I move it to the tail of the structure, kernel always panic when
> > booting. Perhaps there is another potential bug?
> 
> Why would that cause an additional cache miss?
> 
> 
> The node array is following at the end of the structure. If you want to
> move it down then it needs to be placed before the node field

Thanks. The moving cpu_slab to tail doesn't improve it. 

I used perf to collect statistics. Only data cache miss has a little difference.
My testing command on my 2 socket machine:
#hackbench 100 process 20000

With 2.6.33, it takes for about 96 seconds while 2.6.34-rc2 (or the latest tip tree)
takes for about 101 seconds.

perf shows some functions around SLUB have more cpu utilization, while some other
SLUB functions have less cpu utilization.

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Christoph Lameter]

On Fri, 2 Apr 2010, Zhang, Yanmin wrote:

> My testing command on my 2 socket machine:
> #hackbench 100 process 20000
>
> With 2.6.33, it takes for about 96 seconds while 2.6.34-rc2 (or the latest tip tree)
> takes for about 101 seconds.
>
> perf shows some functions around SLUB have more cpu utilization, while some other
> SLUB functions have less cpu utilization.

Hmnmmm... The dynamic percpu areas use page tables and that data is used
in the fast path. Maybe the high thread count causes tlb trashing?

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Pekka Enberg]

(I'm CC'ing Tejun)

On Mon, Apr 5, 2010 at 4:54 PM, Christoph Lameter
<cl@linux-foundation.org> wrote:
> On Fri, 2 Apr 2010, Zhang, Yanmin wrote:
>
>> My testing command on my 2 socket machine:
>> #hackbench 100 process 20000
>>
>> With 2.6.33, it takes for about 96 seconds while 2.6.34-rc2 (or the latest tip tree)
>> takes for about 101 seconds.
>>
>> perf shows some functions around SLUB have more cpu utilization, while some other
>> SLUB functions have less cpu utilization.
>
> Hmnmmm... The dynamic percpu areas use page tables and that data is used
> in the fast path. Maybe the high thread count causes tlb trashing?

Hmm indeed. I don't see anything particularly funny in the SLUB percpu
conversion so maybe this is a more issue with the new percpu
allocator?

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Tejun Heo]

Hello,

On 04/06/2010 02:30 AM, Pekka Enberg wrote:
>> Hmnmmm... The dynamic percpu areas use page tables and that data is used
>> in the fast path. Maybe the high thread count causes tlb trashing?
> 
> Hmm indeed. I don't see anything particularly funny in the SLUB percpu
> conversion so maybe this is a more issue with the new percpu
> allocator?

By default, percpu allocator embeds the first chunk in the kernel
linear mapping and accesses there shouldn't involve any TLB overhead.
>From the second chunk on, they're mapped page-by-page into vmalloc
area.  This can be updated to use larger page mapping but 2M page
per-cpu is pretty large and the trade off hasn't been right yet.

The amount reserved for dynamic allocation in the first chunk is
determined by PERCPU_DYNAMIC_RESERVE constant in
include/linux/percpu.h.  It's currently 20k on 64bit machines and 12k
on 32bit.  The intention was to size this such that most common stuff
is allocated from this area.  The 20k and 12k are numbers that I
pulled out of my ass :-) with the custom config I used.  Now that more
stuff has been converted to dynamic percpu, it's quite possible that
the area is too small.  Can you please try to increase the size of the
area (say 2 or 4 times) and see whether the performance regression
goes away?

Thanks.

-- 
tejun

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Zhang, Yanmin]

On Tue, 2010-04-06 at 10:27 +0900, Tejun Heo wrote:
> Hello,
> 
> On 04/06/2010 02:30 AM, Pekka Enberg wrote:
> >> Hmnmmm... The dynamic percpu areas use page tables and that data is used
> >> in the fast path. Maybe the high thread count causes tlb trashing?
> > 
> > Hmm indeed. I don't see anything particularly funny in the SLUB percpu
> > conversion so maybe this is a more issue with the new percpu
> > allocator?
> 
> By default, percpu allocator embeds the first chunk in the kernel
> linear mapping and accesses there shouldn't involve any TLB overhead.
> >From the second chunk on, they're mapped page-by-page into vmalloc
> area.  This can be updated to use larger page mapping but 2M page
> per-cpu is pretty large and the trade off hasn't been right yet.
> 
> The amount reserved for dynamic allocation in the first chunk is
> determined by PERCPU_DYNAMIC_RESERVE constant in
> include/linux/percpu.h.  It's currently 20k on 64bit machines and 12k
> on 32bit.  The intention was to size this such that most common stuff
> is allocated from this area.  The 20k and 12k are numbers that I
> pulled out of my ass :-) with the custom config I used.  Now that more
> stuff has been converted to dynamic percpu, it's quite possible that
> the area is too small.  Can you please try to increase the size of the
> area (say 2 or 4 times) and see whether the performance regression
> goes away?
Thanks. I tried 2 and 4 times and didn't see much improvement.
I checked /proc/vamallocinfo and it doesn't have item of pcpu_get_vm_areas
when I use 4 times of PERCPU_DYNAMIC_RESERVE.

I used perf to collect dtlb misses and LLC misses. dtlb miss data is not
stable. Sometimes, we have a bigger dtlb miss, but get a better result.

LLC misses data are more stable. Only LLC-load-misses is the clear sign now.
LLC-store-misses has no big difference.

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Christoph Lameter]

On Tue, 6 Apr 2010, Zhang, Yanmin wrote:

> Thanks. I tried 2 and 4 times and didn't see much improvement.
> I checked /proc/vamallocinfo and it doesn't have item of pcpu_get_vm_areas
> when I use 4 times of PERCPU_DYNAMIC_RESERVE.

> I used perf to collect dtlb misses and LLC misses. dtlb miss data is not
> stable. Sometimes, we have a bigger dtlb miss, but get a better result.
>
> LLC misses data are more stable. Only LLC-load-misses is the clear sign now.
> LLC-store-misses has no big difference.

LLC-load-miss is exactly what condition?

The cacheline environment in the hotpath should only include the following
cache lines (without debugging and counters):

1. The first cacheline from the kmem_cache structure

(This is different from the sitation before the 2.6.34 changes. Earlier
some critical values (object length etc) where available
from the kmem_cache_cpu structure.  The cacheline containing the percpu
structure array was needed to determome the kmem_cache_cpu address!)

2. The first cacheline from kmem_cache_cpu

3. The first cacheline of the data object (free pointer)

And in case of a kfree/ kmem_cache_free:

4. Cacheline that contains the page struct of the page the object resides
in.

Can you post the .config you are using and the bootup messages?

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Christoph Lameter]

We cannot reproduce the issue here. Our tests here (dual quad dell) show a
performance increase in hackbench instead.

Linux 2.6.33.2 #2 SMP Mon Apr 5 11:30:56 CDT 2010 x86_64 GNU/Linux
./hackbench 100 process 200000
Running with 100*40 (== 4000) tasks.
Time: 3102.142
./hackbench 100 process 20000
Running with 100*40 (== 4000) tasks.
Time: 308.731
./hackbench 100 process 20000
Running with 100*40 (== 4000) tasks.
Time: 311.591
./hackbench 100 process 20000
Running with 100*40 (== 4000) tasks.
Time: 310.200
./hackbench 10 process 20000
Running with 10*40 (== 400) tasks.
Time: 38.048
./hackbench 10 process 20000
Running with 10*40 (== 400) tasks.
Time: 44.711
./hackbench 10 process 20000
Running with 10*40 (== 400) tasks.
Time: 39.407
./hackbench 1 process 20000
Running with 1*40 (== 40) tasks.
Time: 9.411
./hackbench 1 process 20000
Running with 1*40 (== 40) tasks.
Time: 8.765
./hackbench 1 process 20000
Running with 1*40 (== 40) tasks.
Time: 8.822

Linux 2.6.34-rc3 #1 SMP Tue Apr 6 13:30:34 CDT 2010 x86_64 GNU/Linux
./hackbench 100 process 200000
Running with 100*40 (== 4000) tasks.
Time: 3003.578
./hackbench 100 process 20000
Running with 100*40 (== 4000) tasks.
Time: 300.289
./hackbench 100 process 20000
Running with 100*40 (== 4000) tasks.
Time: 301.462
./hackbench 100 process 20000
Running with 100*40 (== 4000) tasks.
Time: 301.173
./hackbench 10 process 20000
Running with 10*40 (== 400) tasks.
Time: 41.191
./hackbench 10 process 20000
Running with 10*40 (== 400) tasks.
Time: 41.964
./hackbench 10 process 20000
Running with 10*40 (== 400) tasks.
Time: 41.470
./hackbench 1 process 20000
Running with 1*40 (== 40) tasks.
Time: 8.829
./hackbench 1 process 20000
Running with 1*40 (== 40) tasks.
Time: 9.166
./hackbench 1 process 20000
Running with 1*40 (== 40) tasks.
Time: 8.681

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Eric Dumazet]

Le mardi 06 avril 2010 à 15:55 -0500, Christoph Lameter a écrit :
> We cannot reproduce the issue here. Our tests here (dual quad dell) show a
> performance increase in hackbench instead.
> 
> Linux 2.6.33.2 #2 SMP Mon Apr 5 11:30:56 CDT 2010 x86_64 GNU/Linux
> ./hackbench 100 process 200000
> Running with 100*40 (== 4000) tasks.
> Time: 3102.142
> ./hackbench 100 process 20000
> Running with 100*40 (== 4000) tasks.
> Time: 308.731
> ./hackbench 100 process 20000
> Running with 100*40 (== 4000) tasks.
> Time: 311.591
> ./hackbench 100 process 20000
> Running with 100*40 (== 4000) tasks.
> Time: 310.200
> ./hackbench 10 process 20000
> Running with 10*40 (== 400) tasks.
> Time: 38.048
> ./hackbench 10 process 20000
> Running with 10*40 (== 400) tasks.
> Time: 44.711
> ./hackbench 10 process 20000
> Running with 10*40 (== 400) tasks.
> Time: 39.407
> ./hackbench 1 process 20000
> Running with 1*40 (== 40) tasks.
> Time: 9.411
> ./hackbench 1 process 20000
> Running with 1*40 (== 40) tasks.
> Time: 8.765
> ./hackbench 1 process 20000
> Running with 1*40 (== 40) tasks.
> Time: 8.822
> 
> Linux 2.6.34-rc3 #1 SMP Tue Apr 6 13:30:34 CDT 2010 x86_64 GNU/Linux
> ./hackbench 100 process 200000
> Running with 100*40 (== 4000) tasks.
> Time: 3003.578
> ./hackbench 100 process 20000
> Running with 100*40 (== 4000) tasks.
> Time: 300.289
> ./hackbench 100 process 20000
> Running with 100*40 (== 4000) tasks.
> Time: 301.462
> ./hackbench 100 process 20000
> Running with 100*40 (== 4000) tasks.
> Time: 301.173
> ./hackbench 10 process 20000
> Running with 10*40 (== 400) tasks.
> Time: 41.191
> ./hackbench 10 process 20000
> Running with 10*40 (== 400) tasks.
> Time: 41.964
> ./hackbench 10 process 20000
> Running with 10*40 (== 400) tasks.
> Time: 41.470
> ./hackbench 1 process 20000
> Running with 1*40 (== 40) tasks.
> Time: 8.829
> ./hackbench 1 process 20000
> Running with 1*40 (== 40) tasks.
> Time: 9.166
> ./hackbench 1 process 20000
> Running with 1*40 (== 40) tasks.
> Time: 8.681
> 
> 


Well, your config might be very different... and hackbench results can
vary by 10% on same machine, same kernel.

This is not a reliable bench, because af_unix is not prepared to get
such a lazy workload.

We really should warn people about this.



# hackbench 25 process 3000
Running with 25*40 (== 1000) tasks.
Time: 12.922
# hackbench 25 process 3000
Running with 25*40 (== 1000) tasks.
Time: 12.696
# hackbench 25 process 3000
Running with 25*40 (== 1000) tasks.
Time: 13.060
# hackbench 25 process 3000
Running with 25*40 (== 1000) tasks.
Time: 14.108
# hackbench 25 process 3000
Running with 25*40 (== 1000) tasks.
Time: 13.165
# hackbench 25 process 3000
Running with 25*40 (== 1000) tasks.
Time: 13.310
# hackbench 25 process 3000 
Running with 25*40 (== 1000) tasks.
Time: 12.530


booting with slub_min_order=3 do change hackbench results for example ;)

All writers can compete on spinlock for a target UNIX socket, we spend _lot_ of time spinning.

If we _really_ want to speedup hackbench, we would have to change unix_state_lock()
to use a non spinning locking primitive (aka lock_sock()), and slowdown normal path.


# perf record -f hackbench 25 process 3000 
Running with 25*40 (== 1000) tasks.
Time: 13.330
[ perf record: Woken up 289 times to write data ]
[ perf record: Captured and wrote 54.312 MB perf.data (~2372928 samples) ]
# perf report
# Samples: 2370135
#
# Overhead    Command                 Shared Object  Symbol
# ........  .........  ............................  ......
#
     9.68%  hackbench  [kernel]                      [k] do_raw_spin_lock
     6.50%  hackbench  [kernel]                      [k] schedule
     4.38%  hackbench  [kernel]                      [k] __kmalloc_track_caller
     3.95%  hackbench  [kernel]                      [k] copy_to_user
     3.86%  hackbench  [kernel]                      [k] __alloc_skb
     3.77%  hackbench  [kernel]                      [k] unix_stream_recvmsg
     3.12%  hackbench  [kernel]                      [k] sock_alloc_send_pskb
     2.75%  hackbench  [vdso]                        [.] 0x000000ffffe425
     2.28%  hackbench  [kernel]                      [k] sysenter_past_esp
     2.03%  hackbench  [kernel]                      [k] __mutex_lock_common
     2.00%  hackbench  [kernel]                      [k] kfree
     2.00%  hackbench  [kernel]                      [k] delay_tsc
     1.75%  hackbench  [kernel]                      [k] update_curr
     1.70%  hackbench  [kernel]                      [k] kmem_cache_alloc
     1.69%  hackbench  [kernel]                      [k] do_raw_spin_unlock
     1.60%  hackbench  [kernel]                      [k] unix_stream_sendmsg
     1.54%  hackbench  [kernel]                      [k] sched_clock_local
     1.46%  hackbench  [kernel]                      [k] __slab_free
     1.37%  hackbench  [kernel]                      [k] do_raw_read_lock
     1.34%  hackbench  [kernel]                      [k] __switch_to
     1.24%  hackbench  [kernel]                      [k] select_task_rq_fair
     1.23%  hackbench  [kernel]                      [k] sock_wfree
     1.21%  hackbench  [kernel]                      [k] _raw_spin_unlock_irqrestore
     1.19%  hackbench  [kernel]                      [k] __mutex_unlock_slowpath
     1.05%  hackbench  [kernel]                      [k] trace_hardirqs_off
     0.99%  hackbench  [kernel]                      [k] __might_sleep
     0.93%  hackbench  [kernel]                      [k] do_raw_read_unlock
     0.93%  hackbench  [kernel]                      [k] _raw_spin_lock
     0.91%  hackbench  [kernel]                      [k] try_to_wake_up
     0.81%  hackbench  [kernel]                      [k] sched_clock
     0.80%  hackbench  [kernel]                      [k] trace_hardirqs_on

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Zhang, Yanmin]

On Wed, 2010-04-07 at 00:10 +0200, Eric Dumazet wrote:
> Le mardi 06 avril 2010 à 15:55 -0500, Christoph Lameter a écrit :
> > We cannot reproduce the issue here. Our tests here (dual quad dell) show a
> > performance increase in hackbench instead.
> > 
> > Linux 2.6.33.2 #2 SMP Mon Apr 5 11:30:56 CDT 2010 x86_64 GNU/Linux
> > ./hackbench 100 process 200000
> > Running with 100*40 (== 4000) tasks.
> > Time: 3102.142
> > ./hackbench 100 process 20000
> > Running with 100*40 (== 4000) tasks.
> > Time: 308.731
> > ./hackbench 100 process 20000
> > Running with 100*40 (== 4000) tasks.
> > Time: 311.591
> > ./hackbench 100 process 20000
> > Running with 100*40 (== 4000) tasks.
> > Time: 310.200
> > ./hackbench 10 process 20000
> > Running with 10*40 (== 400) tasks.
> > Time: 38.048
> > ./hackbench 10 process 20000
> > Running with 10*40 (== 400) tasks.
> > Time: 44.711
> > ./hackbench 10 process 20000
> > Running with 10*40 (== 400) tasks.
> > Time: 39.407
> > ./hackbench 1 process 20000
> > Running with 1*40 (== 40) tasks.
> > Time: 9.411
> > ./hackbench 1 process 20000
> > Running with 1*40 (== 40) tasks.
> > Time: 8.765
> > ./hackbench 1 process 20000
> > Running with 1*40 (== 40) tasks.
> > Time: 8.822
> > 
> > Linux 2.6.34-rc3 #1 SMP Tue Apr 6 13:30:34 CDT 2010 x86_64 GNU/Linux
> > ./hackbench 100 process 200000
> > Running with 100*40 (== 4000) tasks.
> > Time: 3003.578
> > ./hackbench 100 process 20000
> > Running with 100*40 (== 4000) tasks.
> > Time: 300.289
> > ./hackbench 100 process 20000
> > Running with 100*40 (== 4000) tasks.
> > Time: 301.462
> > ./hackbench 100 process 20000
> > Running with 100*40 (== 4000) tasks.
> > Time: 301.173
> > ./hackbench 10 process 20000
> > Running with 10*40 (== 400) tasks.
> > Time: 41.191
> > ./hackbench 10 process 20000
> > Running with 10*40 (== 400) tasks.
> > Time: 41.964
> > ./hackbench 10 process 20000
> > Running with 10*40 (== 400) tasks.
> > Time: 41.470
> > ./hackbench 1 process 20000
> > Running with 1*40 (== 40) tasks.
> > Time: 8.829
> > ./hackbench 1 process 20000
> > Running with 1*40 (== 40) tasks.
> > Time: 9.166
> > ./hackbench 1 process 20000
> > Running with 1*40 (== 40) tasks.
> > Time: 8.681
> > 
> > 
> 
> 
> Well, your config might be very different... and hackbench results can
> vary by 10% on same machine, same kernel.
> 
> This is not a reliable bench, because af_unix is not prepared to get
> such a lazy workload.
Thanks. I also found that. Normally, my script runs hackbench for 3 times and
gets an average value. To decrease the variation, I use 
'./hackbench 100 process 200000' to get a more stable result.


> 
> We really should warn people about this.
> 
> 
> 
> # hackbench 25 process 3000
> Running with 25*40 (== 1000) tasks.
> Time: 12.922
> # hackbench 25 process 3000
> Running with 25*40 (== 1000) tasks.
> Time: 12.696
> # hackbench 25 process 3000
> Running with 25*40 (== 1000) tasks.
> Time: 13.060
> # hackbench 25 process 3000
> Running with 25*40 (== 1000) tasks.
> Time: 14.108
> # hackbench 25 process 3000
> Running with 25*40 (== 1000) tasks.
> Time: 13.165
> # hackbench 25 process 3000
> Running with 25*40 (== 1000) tasks.
> Time: 13.310
> # hackbench 25 process 3000 
> Running with 25*40 (== 1000) tasks.
> Time: 12.530
> 
> 
> booting with slub_min_order=3 do change hackbench results for example ;)
By default, slub_min_order=3 on my Nehalem machines. I also tried different
larger slub_min_order and didn't find help.


> 
> All writers can compete on spinlock for a target UNIX socket, we spend _lot_ of time spinning.
> 
> If we _really_ want to speedup hackbench, we would have to change unix_state_lock()
> to use a non spinning locking primitive (aka lock_sock()), and slowdown normal path.
> 
> 
> # perf record -f hackbench 25 process 3000 
> Running with 25*40 (== 1000) tasks.
> Time: 13.330
> [ perf record: Woken up 289 times to write data ]
> [ perf record: Captured and wrote 54.312 MB perf.data (~2372928 samples) ]
> # perf report
> # Samples: 2370135
> #
> # Overhead    Command                 Shared Object  Symbol
> # ........  .........  ............................  ......
> #
>      9.68%  hackbench  [kernel]                      [k] do_raw_spin_lock
>      6.50%  hackbench  [kernel]                      [k] schedule
>      4.38%  hackbench  [kernel]                      [k] __kmalloc_track_caller
>      3.95%  hackbench  [kernel]                      [k] copy_to_user
>      3.86%  hackbench  [kernel]                      [k] __alloc_skb
>      3.77%  hackbench  [kernel]                      [k] unix_stream_recvmsg
>      3.12%  hackbench  [kernel]                      [k] sock_alloc_send_pskb
>      2.75%  hackbench  [vdso]                        [.] 0x000000ffffe425
>      2.28%  hackbench  [kernel]                      [k] sysenter_past_esp
>      2.03%  hackbench  [kernel]                      [k] __mutex_lock_common
>      2.00%  hackbench  [kernel]                      [k] kfree
>      2.00%  hackbench  [kernel]                      [k] delay_tsc
>      1.75%  hackbench  [kernel]                      [k] update_curr
>      1.70%  hackbench  [kernel]                      [k] kmem_cache_alloc
>      1.69%  hackbench  [kernel]                      [k] do_raw_spin_unlock
>      1.60%  hackbench  [kernel]                      [k] unix_stream_sendmsg
>      1.54%  hackbench  [kernel]                      [k] sched_clock_local
>      1.46%  hackbench  [kernel]                      [k] __slab_free
>      1.37%  hackbench  [kernel]                      [k] do_raw_read_lock
>      1.34%  hackbench  [kernel]                      [k] __switch_to
>      1.24%  hackbench  [kernel]                      [k] select_task_rq_fair
>      1.23%  hackbench  [kernel]                      [k] sock_wfree
>      1.21%  hackbench  [kernel]                      [k] _raw_spin_unlock_irqrestore
>      1.19%  hackbench  [kernel]                      [k] __mutex_unlock_slowpath
>      1.05%  hackbench  [kernel]                      [k] trace_hardirqs_off
>      0.99%  hackbench  [kernel]                      [k] __might_sleep
>      0.93%  hackbench  [kernel]                      [k] do_raw_read_unlock
>      0.93%  hackbench  [kernel]                      [k] _raw_spin_lock
>      0.91%  hackbench  [kernel]                      [k] try_to_wake_up
>      0.81%  hackbench  [kernel]                      [k] sched_clock
>      0.80%  hackbench  [kernel]                      [k] trace_hardirqs_on

I collected retired instruction, dtlb miss and LLC miss.
Below is data of LLC miss.

Kernel 2.6.33:
# Samples: 11639436896 LLC-load-misses
#
# Overhead          Command                                           Shared Object  Symbol
# ........  ...............  ......................................................  ......
#
    20.94%        hackbench  [kernel.kallsyms]                                       [k] copy_user_generic_string
    14.56%        hackbench  [kernel.kallsyms]                                       [k] unix_stream_recvmsg
    12.88%        hackbench  [kernel.kallsyms]                                       [k] kfree
     7.37%        hackbench  [kernel.kallsyms]                                       [k] kmem_cache_free
     7.18%        hackbench  [kernel.kallsyms]                                       [k] kmem_cache_alloc_node
     6.78%        hackbench  [kernel.kallsyms]                                       [k] kfree_skb
     6.27%        hackbench  [kernel.kallsyms]                                       [k] __kmalloc_node_track_caller
     2.73%        hackbench  [kernel.kallsyms]                                       [k] __slab_free
     2.21%        hackbench  [kernel.kallsyms]                                       [k] get_partial_node
     2.01%        hackbench  [kernel.kallsyms]                                       [k] _raw_spin_lock
     1.59%        hackbench  [kernel.kallsyms]                                       [k] schedule
     1.27%        hackbench  hackbench                                               [.] receiver
     0.99%        hackbench  libpthread-2.9.so                                       [.] __read
     0.87%        hackbench  [kernel.kallsyms]                                       [k] unix_stream_sendmsg




Kernel 2.6.34-rc3:
# Samples: 13079611308 LLC-load-misses
#
# Overhead          Command                                                         Shared Object  Symbol
# ........  ...............  ....................................................................  ......
#
    18.55%        hackbench  [kernel.kallsyms]                                                     [k] copy_user_generic_str
ing
    13.19%        hackbench  [kernel.kallsyms]                                                     [k] unix_stream_recvmsg
    11.62%        hackbench  [kernel.kallsyms]                                                     [k] kfree
     8.54%        hackbench  [kernel.kallsyms]                                                     [k] kmem_cache_free
     7.88%        hackbench  [kernel.kallsyms]                                                     [k] __kmalloc_node_track_
caller
     6.54%        hackbench  [kernel.kallsyms]                                                     [k] kmem_cache_alloc_node
     5.94%        hackbench  [kernel.kallsyms]                                                     [k] kfree_skb
     3.48%        hackbench  [kernel.kallsyms]                                                     [k] __slab_free
     2.15%        hackbench  [kernel.kallsyms]                                                     [k] _raw_spin_lock
     1.83%        hackbench  [kernel.kallsyms]                                                     [k] schedule
     1.82%        hackbench  [kernel.kallsyms]                                                     [k] get_partial_node
     1.59%        hackbench  hackbench                                                             [.] receiver
     1.37%        hackbench  libpthread-2.9.so                                                     [.] __read

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Eric Dumazet]

Le mercredi 07 avril 2010 à 10:34 +0800, Zhang, Yanmin a écrit :

> I collected retired instruction, dtlb miss and LLC miss.
> Below is data of LLC miss.
> 
> Kernel 2.6.33:
> # Samples: 11639436896 LLC-load-misses
> #
> # Overhead          Command                                           Shared Object  Symbol
> # ........  ...............  ......................................................  ......
> #
>     20.94%        hackbench  [kernel.kallsyms]                                       [k] copy_user_generic_string
>     14.56%        hackbench  [kernel.kallsyms]                                       [k] unix_stream_recvmsg
>     12.88%        hackbench  [kernel.kallsyms]                                       [k] kfree
>      7.37%        hackbench  [kernel.kallsyms]                                       [k] kmem_cache_free
>      7.18%        hackbench  [kernel.kallsyms]                                       [k] kmem_cache_alloc_node
>      6.78%        hackbench  [kernel.kallsyms]                                       [k] kfree_skb
>      6.27%        hackbench  [kernel.kallsyms]                                       [k] __kmalloc_node_track_caller
>      2.73%        hackbench  [kernel.kallsyms]                                       [k] __slab_free
>      2.21%        hackbench  [kernel.kallsyms]                                       [k] get_partial_node
>      2.01%        hackbench  [kernel.kallsyms]                                       [k] _raw_spin_lock
>      1.59%        hackbench  [kernel.kallsyms]                                       [k] schedule
>      1.27%        hackbench  hackbench                                               [.] receiver
>      0.99%        hackbench  libpthread-2.9.so                                       [.] __read
>      0.87%        hackbench  [kernel.kallsyms]                                       [k] unix_stream_sendmsg
> 
> 
> 
> 
> Kernel 2.6.34-rc3:
> # Samples: 13079611308 LLC-load-misses
> #
> # Overhead          Command                                                         Shared Object  Symbol
> # ........  ...............  ....................................................................  ......
> #
>     18.55%        hackbench  [kernel.kallsyms]                                                     [k] copy_user_generic_str
> ing
>     13.19%        hackbench  [kernel.kallsyms]                                                     [k] unix_stream_recvmsg
>     11.62%        hackbench  [kernel.kallsyms]                                                     [k] kfree
>      8.54%        hackbench  [kernel.kallsyms]                                                     [k] kmem_cache_free
>      7.88%        hackbench  [kernel.kallsyms]                                                     [k] __kmalloc_node_track_
> caller
>      6.54%        hackbench  [kernel.kallsyms]                                                     [k] kmem_cache_alloc_node
>      5.94%        hackbench  [kernel.kallsyms]                                                     [k] kfree_skb
>      3.48%        hackbench  [kernel.kallsyms]                                                     [k] __slab_free
>      2.15%        hackbench  [kernel.kallsyms]                                                     [k] _raw_spin_lock
>      1.83%        hackbench  [kernel.kallsyms]                                                     [k] schedule
>      1.82%        hackbench  [kernel.kallsyms]                                                     [k] get_partial_node
>      1.59%        hackbench  hackbench                                                             [.] receiver
>      1.37%        hackbench  libpthread-2.9.so                                                     [.] __read
> 
> 

Please check values of /proc/sys/net/core/rmem_default
and /proc/sys/net/core/wmem_default on your machines.

Their values can also change hackbench results, because increasing
wmem_default allows af_unix senders to consume much more skbs and stress
slab allocators (__slab_free), way beyond slub_min_order can tune them.

When 2000 senders are running (and 2000 receivers), we might consume
something like 2000 * 100.000 bytes of kernel memory for skbs. TLB
trashing is expected, because all these skbs can span many 2MB pages.
Maybe some node imbalance happens too.



You could try to boot your machine with less ram per node and check :

# cat /proc/buddyinfo 
Node 0, zone      DMA      2      1      2      2      1      1      1      0      1      1      3 
Node 0, zone    DMA32    219    298    143    584    145     57     44     41     31     26    517 
Node 1, zone    DMA32      4      1     17      1      0      3      2      2      2      2    123 
Node 1, zone   Normal    126    169     83      8      7      5     59     59     49     28    459 


One experiment on your Nehalem machine would be to change hackbench so
that each group (20 senders/ 20 receivers) run on a particular NUMA
node.

x86info -c ->

CPU #1
EFamily: 0 EModel: 1 Family: 6 Model: 26 Stepping: 5
CPU Model: Core i7 (Nehalem)
Processor name string: Intel(R) Xeon(R) CPU           X5570  @ 2.93GHz
Type: 0 (Original OEM)	Brand: 0 (Unsupported)
Number of cores per physical package=8
Number of logical processors per socket=16
Number of logical processors per core=2
APIC ID: 0x10	Package: 0  Core: 1   SMT ID 0
Cache info
 L1 Instruction cache: 32KB, 4-way associative. 64 byte line size.
 L1 Data cache: 32KB, 8-way associative. 64 byte line size.
 L2 (MLC): 256KB, 8-way associative. 64 byte line size.
TLB info
 Data TLB: 4KB pages, 4-way associative, 64 entries
 64 byte prefetching.
Found unknown cache descriptors: 55 5a b2 ca e4 

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Zhang, Yanmin]

On Wed, 2010-04-07 at 08:39 +0200, Eric Dumazet wrote:
> Le mercredi 07 avril 2010 à 10:34 +0800, Zhang, Yanmin a écrit :
> 
> > I collected retired instruction, dtlb miss and LLC miss.
> > Below is data of LLC miss.
> > 
> > Kernel 2.6.33:
> > # Samples: 11639436896 LLC-load-misses
> > #
> > # Overhead          Command                                           Shared Object  Symbol
> > # ........  ...............  ......................................................  ......
> > #
> >     20.94%        hackbench  [kernel.kallsyms]                                       [k] copy_user_generic_string
> >     14.56%        hackbench  [kernel.kallsyms]                                       [k] unix_stream_recvmsg
> >     12.88%        hackbench  [kernel.kallsyms]                                       [k] kfree
> >      7.37%        hackbench  [kernel.kallsyms]                                       [k] kmem_cache_free
> >      7.18%        hackbench  [kernel.kallsyms]                                       [k] kmem_cache_alloc_node
> >      6.78%        hackbench  [kernel.kallsyms]                                       [k] kfree_skb
> >      6.27%        hackbench  [kernel.kallsyms]                                       [k] __kmalloc_node_track_caller
> >      2.73%        hackbench  [kernel.kallsyms]                                       [k] __slab_free
> >      2.21%        hackbench  [kernel.kallsyms]                                       [k] get_partial_node
> >      2.01%        hackbench  [kernel.kallsyms]                                       [k] _raw_spin_lock
> >      1.59%        hackbench  [kernel.kallsyms]                                       [k] schedule
> >      1.27%        hackbench  hackbench                                               [.] receiver
> >      0.99%        hackbench  libpthread-2.9.so                                       [.] __read
> >      0.87%        hackbench  [kernel.kallsyms]                                       [k] unix_stream_sendmsg
> > 
> > 
> > 
> > 
> > Kernel 2.6.34-rc3:
> > # Samples: 13079611308 LLC-load-misses
> > #
> > # Overhead          Command                                                         Shared Object  Symbol
> > # ........  ...............  ....................................................................  ......
> > #
> >     18.55%        hackbench  [kernel.kallsyms]                                                     [k] copy_user_generic_str
> > ing
> >     13.19%        hackbench  [kernel.kallsyms]                                                     [k] unix_stream_recvmsg
> >     11.62%        hackbench  [kernel.kallsyms]                                                     [k] kfree
> >      8.54%        hackbench  [kernel.kallsyms]                                                     [k] kmem_cache_free
> >      7.88%        hackbench  [kernel.kallsyms]                                                     [k] __kmalloc_node_track_
> > caller
> >      6.54%        hackbench  [kernel.kallsyms]                                                     [k] kmem_cache_alloc_node
> >      5.94%        hackbench  [kernel.kallsyms]                                                     [k] kfree_skb
> >      3.48%        hackbench  [kernel.kallsyms]                                                     [k] __slab_free
> >      2.15%        hackbench  [kernel.kallsyms]                                                     [k] _raw_spin_lock
> >      1.83%        hackbench  [kernel.kallsyms]                                                     [k] schedule
> >      1.82%        hackbench  [kernel.kallsyms]                                                     [k] get_partial_node
> >      1.59%        hackbench  hackbench                                                             [.] receiver
> >      1.37%        hackbench  libpthread-2.9.so                                                     [.] __read
> > 
> > 
> 
> Please check values of /proc/sys/net/core/rmem_default
> and /proc/sys/net/core/wmem_default on your machines.
> 
> Their values can also change hackbench results, because increasing
> wmem_default allows af_unix senders to consume much more skbs and stress
> slab allocators (__slab_free), way beyond slub_min_order can tune them.
> 
> When 2000 senders are running (and 2000 receivers), we might consume
> something like 2000 * 100.000 bytes of kernel memory for skbs. TLB
> trashing is expected, because all these skbs can span many 2MB pages.
> Maybe some node imbalance happens too.
It's a good pointer. rmem_default and wmem_default are about 116k on my machine.
I changed them to 52K and it seems there is no improvement.

> 
> 
> 
> You could try to boot your machine with less ram per node and check :
> 
> # cat /proc/buddyinfo 
> Node 0, zone      DMA      2      1      2      2      1      1      1      0      1      1      3 
> Node 0, zone    DMA32    219    298    143    584    145     57     44     41     31     26    517 
> Node 1, zone    DMA32      4      1     17      1      0      3      2      2      2      2    123 
> Node 1, zone   Normal    126    169     83      8      7      5     59     59     49     28    459 
> 
> 
> One experiment on your Nehalem machine would be to change hackbench so
> that each group (20 senders/ 20 receivers) run on a particular NUMA
> node.
I expect process scheduler to work well in scheduling different groups
to different nodes.

I suspected dynamic percpu data didn't take care of NUMA, but kernel dump shows
it does take care of NUMA.

> 
> x86info -c ->
> 
> CPU #1
> EFamily: 0 EModel: 1 Family: 6 Model: 26 Stepping: 5
> CPU Model: Core i7 (Nehalem)
> Processor name string: Intel(R) Xeon(R) CPU           X5570  @ 2.93GHz
> Type: 0 (Original OEM)	Brand: 0 (Unsupported)
> Number of cores per physical package=8
> Number of logical processors per socket=16
> Number of logical processors per core=2
> APIC ID: 0x10	Package: 0  Core: 1   SMT ID 0
> Cache info
>  L1 Instruction cache: 32KB, 4-way associative. 64 byte line size.
>  L1 Data cache: 32KB, 8-way associative. 64 byte line size.
>  L2 (MLC): 256KB, 8-way associative. 64 byte line size.
> TLB info
>  Data TLB: 4KB pages, 4-way associative, 64 entries
>  64 byte prefetching.
> Found unknown cache descriptors: 55 5a b2 ca e4 
> 
> 

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Eric Dumazet]

Le mercredi 07 avril 2010 à 17:07 +0800, Zhang, Yanmin a écrit :
> > 
> > One experiment on your Nehalem machine would be to change hackbench so
> > that each group (20 senders/ 20 receivers) run on a particular NUMA
> > node.
> I expect process scheduler to work well in scheduling different groups
> to different nodes.
> 
> I suspected dynamic percpu data didn't take care of NUMA, but kernel dump shows
> it does take care of NUMA.
> 

hackbench allocates all unix sockets on one single node, then
forks/spans its children.

Thats huge node imbalance.

You can see this with lsof on a running hackbench :


# lsof -p 14802
COMMAND     PID USER   FD   TYPE             DEVICE    SIZE     NODE NAME
hackbench 14802 root  cwd    DIR              104,7    4096 12927240 /data/src/linux-2.6
hackbench 14802 root  rtd    DIR              104,2    4096        2 /
hackbench 14802 root  txt    REG              104,2   17524   697317 /usr/bin/hackbench
hackbench 14802 root  mem    REG              104,2  112212   558042 /lib/ld-2.3.4.so
hackbench 14802 root  mem    REG              104,2 1547588   558043 /lib/tls/libc-2.3.4.so
hackbench 14802 root  mem    REG              104,2  107928   557058 /lib/tls/libpthread-2.3.4.so
hackbench 14802 root  mem    REG                0,0                0 [heap] (stat: No such file or directory)
hackbench 14802 root    0u   CHR              136,0                3 /dev/pts/0
hackbench 14802 root    1u   CHR              136,0                3 /dev/pts/0
hackbench 14802 root    2u   CHR              136,0                3 /dev/pts/0
hackbench 14802 root    3u  unix 0xffff8800ac0da100            28939 socket
hackbench 14802 root    4u  unix 0xffff8800ac0da400            28940 socket
hackbench 14802 root    5u  unix 0xffff8800ac0da700            28941 socket
hackbench 14802 root    6u  unix 0xffff8800ac0daa00            28942 socket
hackbench 14802 root    8u  unix 0xffff8800aeac1800            28984 socket
hackbench 14802 root    9u  unix 0xffff8800aeac1e00            28986 socket
hackbench 14802 root   10u  unix 0xffff8800aeac2400            28988 socket
hackbench 14802 root   11u  unix 0xffff8800aeac2a00            28990 socket
hackbench 14802 root   12u  unix 0xffff8800aeac3000            28992 socket
hackbench 14802 root   13u  unix 0xffff8800aeac3600            28994 socket
hackbench 14802 root   14u  unix 0xffff8800aeac3c00            28996 socket
hackbench 14802 root   15u  unix 0xffff8800aeac4200            28998 socket
hackbench 14802 root   16u  unix 0xffff8800aeac4800            29000 socket
hackbench 14802 root   17u  unix 0xffff8800aeac4e00            29002 socket
hackbench 14802 root   18u  unix 0xffff8800aeac5400            29004 socket
hackbench 14802 root   19u  unix 0xffff8800aeac5a00            29006 socket
hackbench 14802 root   20u  unix 0xffff8800aeac6000            29008 socket
hackbench 14802 root   21u  unix 0xffff8800aeac6600            29010 socket
hackbench 14802 root   22u  unix 0xffff8800aeac6c00            29012 socket
hackbench 14802 root   23u  unix 0xffff8800aeac7200            29014 socket
hackbench 14802 root   24u  unix 0xffff8800aeac0f00            29016 socket
hackbench 14802 root   25u  unix 0xffff8800aeac0900            29018 socket
hackbench 14802 root   26u  unix 0xffff8800aeac7b00            29020 socket
hackbench 14802 root   27u  unix 0xffff8800aeac7500            29022 socket

All sockets structures (where all _hot_ locks reside) are on a single node.

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Pekka Enberg]

Zhang, Yanmin kirjoitti:
> Kernel 2.6.34-rc3:
> # Samples: 13079611308 LLC-load-misses
> #
> # Overhead          Command                                                         Shared Object  Symbol
> # ........  ...............  ....................................................................  ......
> #
>     18.55%        hackbench  [kernel.kallsyms]                                                     [k] copy_user_generic_str
> ing
>     13.19%        hackbench  [kernel.kallsyms]                                                     [k] unix_stream_recvmsg
>     11.62%        hackbench  [kernel.kallsyms]                                                     [k] kfree
>      8.54%        hackbench  [kernel.kallsyms]                                                     [k] kmem_cache_free
>      7.88%        hackbench  [kernel.kallsyms]                                                     [k] __kmalloc_node_track_
> caller
>      6.54%        hackbench  [kernel.kallsyms]                                                     [k] kmem_cache_alloc_node
>      5.94%        hackbench  [kernel.kallsyms]                                                     [k] kfree_skb
>      3.48%        hackbench  [kernel.kallsyms]                                                     [k] __slab_free
>      2.15%        hackbench  [kernel.kallsyms]                                                     [k] _raw_spin_lock
>      1.83%        hackbench  [kernel.kallsyms]                                                     [k] schedule
>      1.82%        hackbench  [kernel.kallsyms]                                                     [k] get_partial_node
>      1.59%        hackbench  hackbench                                                             [.] receiver
>      1.37%        hackbench  libpthread-2.9.so                                                     [.] __read

Btw, you might want to try out "perf record -g" and "perf report 
--callchain fractal,5" to get a better view of where we're spending 
time. Perhaps you can spot the difference with that more easily.

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Christoph Lameter]

On Wed, 7 Apr 2010, Zhang, Yanmin wrote:

> > booting with slub_min_order=3 do change hackbench results for example ;)
> By default, slub_min_order=3 on my Nehalem machines. I also tried different
> larger slub_min_order and didn't find help.

Lets stop fiddling with kernel command line parameters for these test.
Leave as default. That is how I tested.

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Christoph Lameter]

On Wed, 7 Apr 2010, Zhang, Yanmin wrote:

> I collected retired instruction, dtlb miss and LLC miss.
> Below is data of LLC miss.
>
> Kernel 2.6.33:
>     20.94%        hackbench  [kernel.kallsyms]                                       [k] copy_user_generic_string
>     14.56%        hackbench  [kernel.kallsyms]                                       [k] unix_stream_recvmsg
>     12.88%        hackbench  [kernel.kallsyms]                                       [k] kfree
>      7.37%        hackbench  [kernel.kallsyms]                                       [k] kmem_cache_free
>      7.18%        hackbench  [kernel.kallsyms]                                       [k] kmem_cache_alloc_node
>      6.78%        hackbench  [kernel.kallsyms]                                       [k] kfree_skb
>      6.27%        hackbench  [kernel.kallsyms]                                       [k] __kmalloc_node_track_caller
>      2.73%        hackbench  [kernel.kallsyms]                                       [k] __slab_free
>      2.21%        hackbench  [kernel.kallsyms]                                       [k] get_partial_node
>      2.01%        hackbench  [kernel.kallsyms]                                       [k] _raw_spin_lock
>      1.59%        hackbench  [kernel.kallsyms]                                       [k] schedule
>      1.27%        hackbench  hackbench                                               [.] receiver
>      0.99%        hackbench  libpthread-2.9.so                                       [.] __read
>      0.87%        hackbench  [kernel.kallsyms]                                       [k] unix_stream_sendmsg
>
> Kernel 2.6.34-rc3:
>     18.55%        hackbench  [kernel.kallsyms]                                                     [k] copy_user_generic_str
> ing
>     13.19%        hackbench  [kernel.kallsyms]                                                     [k] unix_stream_recvmsg
>     11.62%        hackbench  [kernel.kallsyms]                                                     [k] kfree
>      8.54%        hackbench  [kernel.kallsyms]                                                     [k] kmem_cache_free
>      7.88%        hackbench  [kernel.kallsyms]                                                     [k] __kmalloc_node_track_
> caller

Seems that the overhead of __kmalloc_node_track_caller was increased. The
function inlines slab_alloc().

>      6.54%        hackbench  [kernel.kallsyms]                                                     [k] kmem_cache_alloc_node
>      5.94%        hackbench  [kernel.kallsyms]                                                     [k] kfree_skb
>      3.48%        hackbench  [kernel.kallsyms]                                                     [k] __slab_free
>      2.15%        hackbench  [kernel.kallsyms]                                                     [k] _raw_spin_lock
>      1.83%        hackbench  [kernel.kallsyms]                                                     [k] schedule
>      1.82%        hackbench  [kernel.kallsyms]                                                     [k] get_partial_node
>      1.59%        hackbench  hackbench                                                             [.] receiver
>      1.37%        hackbench  libpthread-2.9.so                                                     [.] __read

I wonder if this is not related to the kmem_cache_cpu structure straggling
cache line boundaries under some conditions. On 2.6.33 the kmem_cache_cpu
structure was larger and therefore tight packing resulted in different
alignment.

Could you see how the following patch affects the results. It attempts to
increase the size of kmem_cache_cpu to a power of 2 bytes. There is also
the potential that other per cpu fetches to neighboring objects affect the
situation. We could cacheline align the whole thing.

---
 include/linux/slub_def.h |    5 +++++
 1 file changed, 5 insertions(+)

Index: linux-2.6/include/linux/slub_def.h
===================================================================
--- linux-2.6.orig/include/linux/slub_def.h	2010-04-07 11:33:50.000000000 -0500
+++ linux-2.6/include/linux/slub_def.h	2010-04-07 11:35:18.000000000 -0500
@@ -38,6 +38,11 @@ struct kmem_cache_cpu {
 	void **freelist;	/* Pointer to first free per cpu object */
 	struct page *page;	/* The slab from which we are allocating */
 	int node;		/* The node of the page (or -1 for debug) */
+#ifndef CONFIG_64BIT
+	int dummy1;
+#endif
+	unsigned long dummy2;
+
 #ifdef CONFIG_SLUB_STATS
 	unsigned stat[NR_SLUB_STAT_ITEMS];
 #endif

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Pekka Enberg]

Christoph Lameter wrote:
> I wonder if this is not related to the kmem_cache_cpu structure straggling
> cache line boundaries under some conditions. On 2.6.33 the kmem_cache_cpu
> structure was larger and therefore tight packing resulted in different
> alignment.
> 
> Could you see how the following patch affects the results. It attempts to
> increase the size of kmem_cache_cpu to a power of 2 bytes. There is also
> the potential that other per cpu fetches to neighboring objects affect the
> situation. We could cacheline align the whole thing.
> 
> ---
>  include/linux/slub_def.h |    5 +++++
>  1 file changed, 5 insertions(+)
> 
> Index: linux-2.6/include/linux/slub_def.h
> ===================================================================
> --- linux-2.6.orig/include/linux/slub_def.h	2010-04-07 11:33:50.000000000 -0500
> +++ linux-2.6/include/linux/slub_def.h	2010-04-07 11:35:18.000000000 -0500
> @@ -38,6 +38,11 @@ struct kmem_cache_cpu {
>  	void **freelist;	/* Pointer to first free per cpu object */
>  	struct page *page;	/* The slab from which we are allocating */
>  	int node;		/* The node of the page (or -1 for debug) */
> +#ifndef CONFIG_64BIT
> +	int dummy1;
> +#endif
> +	unsigned long dummy2;
> +
>  #ifdef CONFIG_SLUB_STATS
>  	unsigned stat[NR_SLUB_STAT_ITEMS];
>  #endif

Would __cacheline_aligned_in_smp do the trick here?

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Pekka Enberg]

Pekka Enberg wrote:
> Christoph Lameter wrote:
>> I wonder if this is not related to the kmem_cache_cpu structure 
>> straggling
>> cache line boundaries under some conditions. On 2.6.33 the kmem_cache_cpu
>> structure was larger and therefore tight packing resulted in different
>> alignment.
>>
>> Could you see how the following patch affects the results. It attempts to
>> increase the size of kmem_cache_cpu to a power of 2 bytes. There is also
>> the potential that other per cpu fetches to neighboring objects affect 
>> the
>> situation. We could cacheline align the whole thing.
>>
>> ---
>>  include/linux/slub_def.h |    5 +++++
>>  1 file changed, 5 insertions(+)
>>
>> Index: linux-2.6/include/linux/slub_def.h
>> ===================================================================
>> --- linux-2.6.orig/include/linux/slub_def.h    2010-04-07 
>> 11:33:50.000000000 -0500
>> +++ linux-2.6/include/linux/slub_def.h    2010-04-07 
>> 11:35:18.000000000 -0500
>> @@ -38,6 +38,11 @@ struct kmem_cache_cpu {
>>      void **freelist;    /* Pointer to first free per cpu object */
>>      struct page *page;    /* The slab from which we are allocating */
>>      int node;        /* The node of the page (or -1 for debug) */
>> +#ifndef CONFIG_64BIT
>> +    int dummy1;
>> +#endif
>> +    unsigned long dummy2;
>> +
>>  #ifdef CONFIG_SLUB_STATS
>>      unsigned stat[NR_SLUB_STAT_ITEMS];
>>  #endif
> 
> Would __cacheline_aligned_in_smp do the trick here?

Oh, sorry, I think it's actually '____cacheline_aligned_in_smp' (with 
four underscores) for per-cpu data. Confusing...

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Christoph Lameter]

On Wed, 7 Apr 2010, Pekka Enberg wrote:

> Oh, sorry, I think it's actually '____cacheline_aligned_in_smp' (with four
> underscores) for per-cpu data. Confusing...

This does not particulary help to clarify the situation since we are
dealing with data that can either be allocated via the percpu allocator or
be statically present (kmalloc bootstrap situation).

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Pekka Enberg]

Christoph Lameter wrote:
> On Wed, 7 Apr 2010, Pekka Enberg wrote:
> 
>> Oh, sorry, I think it's actually '____cacheline_aligned_in_smp' (with four
>> underscores) for per-cpu data. Confusing...
> 
> This does not particulary help to clarify the situation since we are
> dealing with data that can either be allocated via the percpu allocator or
> be statically present (kmalloc bootstrap situation).

Yes, I am an idiot. :-)

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Pekka Enberg]

Christoph Lameter wrote:
> On Wed, 7 Apr 2010, Pekka Enberg wrote:
> 
>> Oh, sorry, I think it's actually '____cacheline_aligned_in_smp' (with four
>> underscores) for per-cpu data. Confusing...
> 
> This does not particulary help to clarify the situation since we are
> dealing with data that can either be allocated via the percpu allocator or
> be statically present (kmalloc bootstrap situation).

Yes, I am an idiot. :-)

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Christoph Lameter]

On Wed, 7 Apr 2010, Pekka Enberg wrote:

> Yes, I am an idiot. :-)

Plato said it in another way:

"As for me, all I know is that I know nothing."

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Eric Dumazet]

Le mercredi 07 avril 2010 à 13:20 -0500, Christoph Lameter a écrit :
> On Wed, 7 Apr 2010, Pekka Enberg wrote:
> 
> > Oh, sorry, I think it's actually '____cacheline_aligned_in_smp' (with four
> > underscores) for per-cpu data. Confusing...
> 
> This does not particulary help to clarify the situation since we are
> dealing with data that can either be allocated via the percpu allocator or
> be statically present (kmalloc bootstrap situation).
> 
> --

Do we have a user program to check actual L1 cache size of a machine ?

I remember my HP blades have many BIOS options, I would like to make
sure they are properly set.

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Zhang, Yanmin]

On Wed, 2010-04-07 at 20:38 +0200, Eric Dumazet wrote:
> Le mercredi 07 avril 2010 à 13:20 -0500, Christoph Lameter a écrit :
> > On Wed, 7 Apr 2010, Pekka Enberg wrote:
> > 
> > > Oh, sorry, I think it's actually '____cacheline_aligned_in_smp' (with four
> > > underscores) for per-cpu data. Confusing...
> > 
> > This does not particulary help to clarify the situation since we are
> > dealing with data that can either be allocated via the percpu allocator or
> > be statically present (kmalloc bootstrap situation).
> > 
> > --
> 
> Do we have a user program to check actual L1 cache size of a machine ?
If there is no, it's easy to write it as kernel exports the cache stat by
/sys/devices/system/cpu/cpuXXX/cache/indexXXX/

> 
> I remember my HP blades have many BIOS options, I would like to make
> sure they are properly set.
> 
> 
> 

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Eric Dumazet]

Le jeudi 08 avril 2010 à 09:05 +0800, Zhang, Yanmin a écrit :

> > Do we have a user program to check actual L1 cache size of a machine ?
> If there is no, it's easy to write it as kernel exports the cache stat by
> /sys/devices/system/cpu/cpuXXX/cache/indexXXX/

Yes, this is what advertizes my L1 cache having 64bytes lines, but I
would like to check that in practice, this is not 128bytes...

./index0/type:Data
./index0/level:1
./index0/coherency_line_size:64
./index0/physical_line_partition:1
./index0/ways_of_associativity:8
./index0/number_of_sets:64
./index0/size:32K
./index0/shared_cpu_map:00000101
./index0/shared_cpu_list:0,8
./index1/type:Instruction
./index1/level:1
./index1/coherency_line_size:64
./index1/physical_line_partition:1
./index1/ways_of_associativity:4
./index1/number_of_sets:128
./index1/size:32K
./index1/shared_cpu_map:00000101
./index1/shared_cpu_list:0,8

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Eric Dumazet]

I suspect NUMA is completely out of order on current kernel, or my
Nehalem machine NUMA support is a joke

# numactl --hardware
available: 2 nodes (0-1)
node 0 size: 3071 MB
node 0 free: 2637 MB
node 1 size: 3062 MB
node 1 free: 2909 MB


# cat try.sh
hackbench 50 process 5000
numactl --cpubind=0 --membind=0 hackbench 25 process 5000 >RES0 &
numactl --cpubind=1 --membind=1 hackbench 25 process 5000 >RES1 &
wait
echo node0 results
cat RES0
echo node1 results
cat RES1

numactl --cpubind=0 --membind=1 hackbench 25 process 5000 >RES0_1 &
numactl --cpubind=1 --membind=0 hackbench 25 process 5000 >RES1_0 &
wait
echo node0 on mem1 results
cat RES0_1
echo node1 on mem0 results
cat RES1_0

# ./try.sh
Running with 50*40 (== 2000) tasks.
Time: 16.865
node0 results
Running with 25*40 (== 1000) tasks.
Time: 16.767
node1 results
Running with 25*40 (== 1000) tasks.
Time: 16.564
node0 on mem1 results
Running with 25*40 (== 1000) tasks.
Time: 16.814
node1 on mem0 results
Running with 25*40 (== 1000) tasks.
Time: 16.896

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Eric Dumazet]

Le jeudi 08 avril 2010 à 07:39 +0200, Eric Dumazet a écrit :
> I suspect NUMA is completely out of order on current kernel, or my
> Nehalem machine NUMA support is a joke
> 
> # numactl --hardware
> available: 2 nodes (0-1)
> node 0 size: 3071 MB
> node 0 free: 2637 MB
> node 1 size: 3062 MB
> node 1 free: 2909 MB
> 
> 
> # cat try.sh
> hackbench 50 process 5000
> numactl --cpubind=0 --membind=0 hackbench 25 process 5000 >RES0 &
> numactl --cpubind=1 --membind=1 hackbench 25 process 5000 >RES1 &
> wait
> echo node0 results
> cat RES0
> echo node1 results
> cat RES1
> 
> numactl --cpubind=0 --membind=1 hackbench 25 process 5000 >RES0_1 &
> numactl --cpubind=1 --membind=0 hackbench 25 process 5000 >RES1_0 &
> wait
> echo node0 on mem1 results
> cat RES0_1
> echo node1 on mem0 results
> cat RES1_0
> 
> # ./try.sh
> Running with 50*40 (== 2000) tasks.
> Time: 16.865
> node0 results
> Running with 25*40 (== 1000) tasks.
> Time: 16.767
> node1 results
> Running with 25*40 (== 1000) tasks.
> Time: 16.564
> node0 on mem1 results
> Running with 25*40 (== 1000) tasks.
> Time: 16.814
> node1 on mem0 results
> Running with 25*40 (== 1000) tasks.
> Time: 16.896

If run individually, the tests results are more what we would expect
(slow), but if machine runs the two set of process concurrently, each
group runs much faster...


# numactl --cpubind=0 --membind=1 hackbench 25 process 5000
Running with 25*40 (== 1000) tasks.
Time: 21.810

# numactl --cpubind=1 --membind=0 hackbench 25 process 5000
Running with 25*40 (== 1000) tasks.
Time: 20.679

# numactl --cpubind=0 --membind=1 hackbench 25 process 5000 >RES0_1 &
[1] 9177
# numactl --cpubind=1 --membind=0 hackbench 25 process 5000 >RES1_0 &
[2] 9196
# wait
[1]-  Done                    numactl --cpubind=0 --membind=1 hackbench
25 process 5000 >RES0_1
[2]+  Done                    numactl --cpubind=1 --membind=0 hackbench
25 process 5000 >RES1_0
# echo node0 on mem1 results
node0 on mem1 results
# cat RES0_1
Running with 25*40 (== 1000) tasks.
Time: 13.818
# echo node1 on mem0 results
node1 on mem0 results
# cat RES1_0
Running with 25*40 (== 1000) tasks.
Time: 11.633

Oh well...

Re: hackbench regression due to commit 9dfc6e68bfe6e

[David Miller]

From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Thu, 08 Apr 2010 09:00:19 +0200

> If run individually, the tests results are more what we would expect
> (slow), but if machine runs the two set of process concurrently, each
> group runs much faster...

BTW, I just discovered (thanks to the function graph tracer, woo hoo!)
that loopback TCP packets get fully checksum validated on receive.

I'm trying to figure out why skb->ip_summed ends up being
CHECKSUM_NONE in tcp_v4_rcv() even though it gets set to
CHECKSUM_PARTIAL in tcp_sendmsg().

I wonder how much this accounts for some of the hackbench
oddities... and other regressions in loopback tests we've seen.
:-)

Just FYI...

Re: hackbench regression due to commit 9dfc6e68bfe6e

[David Miller]

From: David Miller <davem@davemloft.net>
Date: Thu, 08 Apr 2010 00:05:57 -0700 (PDT)

> From: Eric Dumazet <eric.dumazet@gmail.com>
> Date: Thu, 08 Apr 2010 09:00:19 +0200
> 
>> If run individually, the tests results are more what we would expect
>> (slow), but if machine runs the two set of process concurrently, each
>> group runs much faster...
> 
> BTW, I just discovered (thanks to the function graph tracer, woo hoo!)
> that loopback TCP packets get fully checksum validated on receive.
> 
> I'm trying to figure out why skb->ip_summed ends up being
> CHECKSUM_NONE in tcp_v4_rcv() even though it gets set to
> CHECKSUM_PARTIAL in tcp_sendmsg().

Ok, it looks like it's only ACK packets that have this problem,
but still :-)

It's weird that we have a special ip_dev_loopback_xmit() for for
ip_mc_output() NF_HOOK()s, which forces skb->ip_summed to
CHECKSUM_UNNECESSARY, but the actual normal loopback xmit doesn't
do that...

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Eric Dumazet]

Le jeudi 08 avril 2010 à 00:05 -0700, David Miller a écrit :
> From: Eric Dumazet <eric.dumazet@gmail.com>
> Date: Thu, 08 Apr 2010 09:00:19 +0200
> 
> > If run individually, the tests results are more what we would expect
> > (slow), but if machine runs the two set of process concurrently, each
> > group runs much faster...
> 
> BTW, I just discovered (thanks to the function graph tracer, woo hoo!)
> that loopback TCP packets get fully checksum validated on receive.
> 
> I'm trying to figure out why skb->ip_summed ends up being
> CHECKSUM_NONE in tcp_v4_rcv() even though it gets set to
> CHECKSUM_PARTIAL in tcp_sendmsg().
> 
> I wonder how much this accounts for some of the hackbench
> oddities... and other regressions in loopback tests we've seen.
> :-)
> 
> Just FYI...

Thanks !

But hackbench is a af_unix benchmark, so loopback stuff is not used that
much :)

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Zhang, Yanmin]

On Thu, 2010-04-08 at 09:00 +0200, Eric Dumazet wrote:
> Le jeudi 08 avril 2010 à 07:39 +0200, Eric Dumazet a écrit :
> > I suspect NUMA is completely out of order on current kernel, or my
> > Nehalem machine NUMA support is a joke
> > 
> > # numactl --hardware
> > available: 2 nodes (0-1)
> > node 0 size: 3071 MB
> > node 0 free: 2637 MB
> > node 1 size: 3062 MB
> > node 1 free: 2909 MB
> > 
> > 
> > # cat try.sh
> > hackbench 50 process 5000
> > numactl --cpubind=0 --membind=0 hackbench 25 process 5000 >RES0 &
> > numactl --cpubind=1 --membind=1 hackbench 25 process 5000 >RES1 &
> > wait
> > echo node0 results
> > cat RES0
> > echo node1 results
> > cat RES1
> > 
> > numactl --cpubind=0 --membind=1 hackbench 25 process 5000 >RES0_1 &
> > numactl --cpubind=1 --membind=0 hackbench 25 process 5000 >RES1_0 &
> > wait
> > echo node0 on mem1 results
> > cat RES0_1
> > echo node1 on mem0 results
> > cat RES1_0
> > 
> > # ./try.sh
> > Running with 50*40 (== 2000) tasks.
> > Time: 16.865
> > node0 results
> > Running with 25*40 (== 1000) tasks.
> > Time: 16.767
> > node1 results
> > Running with 25*40 (== 1000) tasks.
> > Time: 16.564
> > node0 on mem1 results
> > Running with 25*40 (== 1000) tasks.
> > Time: 16.814
> > node1 on mem0 results
> > Running with 25*40 (== 1000) tasks.
> > Time: 16.896
> 
> If run individually, the tests results are more what we would expect
> (slow), but if machine runs the two set of process concurrently, each
> group runs much faster...
If there are 2 nodes in the machine, processes on node 0 will contact MCH of
node 1 to access memory of node 1. I suspect the MCH of node 1 might enter
a power-saving mode when all the cpus of node 1 are free. So the transactions
from MCH 1 to MCH 0 has a larger latency.

> 
> 
> # numactl --cpubind=0 --membind=1 hackbench 25 process 5000
> Running with 25*40 (== 1000) tasks.
> Time: 21.810
> 
> # numactl --cpubind=1 --membind=0 hackbench 25 process 5000
> Running with 25*40 (== 1000) tasks.
> Time: 20.679
> 
> # numactl --cpubind=0 --membind=1 hackbench 25 process 5000 >RES0_1 &
> [1] 9177
> # numactl --cpubind=1 --membind=0 hackbench 25 process 5000 >RES1_0 &
> [2] 9196
> # wait
> [1]-  Done                    numactl --cpubind=0 --membind=1 hackbench
> 25 process 5000 >RES0_1
> [2]+  Done                    numactl --cpubind=1 --membind=0 hackbench
> 25 process 5000 >RES1_0
> # echo node0 on mem1 results
> node0 on mem1 results
> # cat RES0_1
> Running with 25*40 (== 1000) tasks.
> Time: 13.818
> # echo node1 on mem0 results
> node1 on mem0 results
> # cat RES1_0
> Running with 25*40 (== 1000) tasks.
> Time: 11.633
> 
> Oh well...
> 
> 

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Eric Dumazet]

Le jeudi 08 avril 2010 à 15:54 +0800, Zhang, Yanmin a écrit :

> If there are 2 nodes in the machine, processes on node 0 will contact MCH of
> node 1 to access memory of node 1. I suspect the MCH of node 1 might enter
> a power-saving mode when all the cpus of node 1 are free. So the transactions
> from MCH 1 to MCH 0 has a larger latency.
> 

Hmm, thanks for the hint, I will investigate this.

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Eric Dumazet]

Le jeudi 08 avril 2010 à 09:54 +0200, Eric Dumazet a écrit :
> Le jeudi 08 avril 2010 à 15:54 +0800, Zhang, Yanmin a écrit :
> 
> > If there are 2 nodes in the machine, processes on node 0 will contact MCH of
> > node 1 to access memory of node 1. I suspect the MCH of node 1 might enter
> > a power-saving mode when all the cpus of node 1 are free. So the transactions
> > from MCH 1 to MCH 0 has a larger latency.
> > 
> 
> Hmm, thanks for the hint, I will investigate this.

Oh well, 

perf timechart record &

Instant crash

Call Trace:
 perf_trace_sched_switch+0xd5/0x120
 schedule+0x6b5/0x860
 retint_careful+0xd/0x21
 
RIP ffffffff81010955 perf_arch_fetch_caller_regs+0x15/0x40
CR2: 00000000d21f1422

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Christoph Lameter]

On Thu, 8 Apr 2010, Eric Dumazet wrote:

> I suspect NUMA is completely out of order on current kernel, or my
> Nehalem machine NUMA support is a joke
>
> # numactl --hardware
> available: 2 nodes (0-1)
> node 0 size: 3071 MB
> node 0 free: 2637 MB
> node 1 size: 3062 MB
> node 1 free: 2909 MB

How do the cpus map to the nodes? cpu 0 and 1 both on the same node?

> # ./try.sh
> Running with 50*40 (== 2000) tasks.
> Time: 16.865
> node0 results
> Running with 25*40 (== 1000) tasks.
> Time: 16.767
> node1 results
> Running with 25*40 (== 1000) tasks.
> Time: 16.564
> node0 on mem1 results
> Running with 25*40 (== 1000) tasks.
> Time: 16.814
> node1 on mem0 results
> Running with 25*40 (== 1000) tasks.
> Time: 16.896
>
>
>

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Eric Dumazet]

Le jeudi 08 avril 2010 à 10:34 -0500, Christoph Lameter a écrit :
> On Thu, 8 Apr 2010, Eric Dumazet wrote:
> 
> > I suspect NUMA is completely out of order on current kernel, or my
> > Nehalem machine NUMA support is a joke
> >
> > # numactl --hardware
> > available: 2 nodes (0-1)
> > node 0 size: 3071 MB
> > node 0 free: 2637 MB
> > node 1 size: 3062 MB
> > node 1 free: 2909 MB
> 
> How do the cpus map to the nodes? cpu 0 and 1 both on the same node?

one socket maps to 0 2 4 6 8 10 12 14 (Node 0)
one socket maps to 1 3 5 7 9 11 13 15 (Node 1)

# numactl --cpubind=0 --membind=0 numactl --show
policy: bind
preferred node: 0
interleavemask: 
interleavenode: 0
nodebind: 0 
membind: 0 
cpubind: 1 3 5 7 9 11 13 15 1024 

(strange 1024 report...)

# numactl --cpubind=1 --membind=1 numactl --show
policy: bind
preferred node: 1
interleavemask: 
interleavenode: 0
nodebind: 
membind: 1 
cpubind: 0 2 4 6 8 10 12 14 



[    0.161170] Booting Node   0, Processors  #1
[    0.248995] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[    0.269177]  Ok.
[    0.269453] Booting Node   1, Processors  #2
[    0.356965] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[    0.377207]  Ok.
[    0.377485] Booting Node   0, Processors  #3
[    0.464935] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[    0.485065]  Ok.
[    0.485217] Booting Node   1, Processors  #4
[    0.572906] CPU 4 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[    0.593044]  Ok.
...
grep "physical id" /proc/cpuinfo 
physical id	: 1
physical id	: 0
physical id	: 1
physical id	: 0
physical id	: 1
physical id	: 0
physical id	: 1
physical id	: 0
physical id	: 1
physical id	: 0
physical id	: 1
physical id	: 0
physical id	: 1
physical id	: 0
physical id	: 1
physical id	: 0

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Christoph Lameter]

On Wed, 7 Apr 2010, Pekka Enberg wrote:

> Christoph Lameter wrote:
> > I wonder if this is not related to the kmem_cache_cpu structure straggling
> > cache line boundaries under some conditions. On 2.6.33 the kmem_cache_cpu
> > structure was larger and therefore tight packing resulted in different
> > alignment.
> >
> > Could you see how the following patch affects the results. It attempts to
> > increase the size of kmem_cache_cpu to a power of 2 bytes. There is also
> > the potential that other per cpu fetches to neighboring objects affect the
> > situation. We could cacheline align the whole thing.
> >
> > ---
> >  include/linux/slub_def.h |    5 +++++
> >  1 file changed, 5 insertions(+)
> >
> > Index: linux-2.6/include/linux/slub_def.h
> > ===================================================================
> > --- linux-2.6.orig/include/linux/slub_def.h	2010-04-07 11:33:50.000000000
> > -0500
> > +++ linux-2.6/include/linux/slub_def.h	2010-04-07 11:35:18.000000000
> > -0500
> > @@ -38,6 +38,11 @@ struct kmem_cache_cpu {
> >  	void **freelist;	/* Pointer to first free per cpu object */
> >  	struct page *page;	/* The slab from which we are allocating */
> >  	int node;		/* The node of the page (or -1 for debug) */
> > +#ifndef CONFIG_64BIT
> > +	int dummy1;
> > +#endif
> > +	unsigned long dummy2;
> > +
> >  #ifdef CONFIG_SLUB_STATS
> >  	unsigned stat[NR_SLUB_STAT_ITEMS];
> >  #endif
>
> Would __cacheline_aligned_in_smp do the trick here?

This is allocated via the percpu allocator. We could specify cacheline
alignment there but that would reduce the density. You basically need 4
words for a kmem_cache_cpu structure. A number of those fit into one 64
byte cacheline.

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Zhang, Yanmin]

On Wed, 2010-04-07 at 11:43 -0500, Christoph Lameter wrote:
> On Wed, 7 Apr 2010, Zhang, Yanmin wrote:
> 
> > I collected retired instruction, dtlb miss and LLC miss.
> > Below is data of LLC miss.
> >
> > Kernel 2.6.33:
> >     20.94%        hackbench  [kernel.kallsyms]                                       [k] copy_user_generic_string
> >     14.56%        hackbench  [kernel.kallsyms]                                       [k] unix_stream_recvmsg
> >     12.88%        hackbench  [kernel.kallsyms]                                       [k] kfree
> >      7.37%        hackbench  [kernel.kallsyms]                                       [k] kmem_cache_free
> >      7.18%        hackbench  [kernel.kallsyms]                                       [k] kmem_cache_alloc_node
> >      6.78%        hackbench  [kernel.kallsyms]                                       [k] kfree_skb
> >      6.27%        hackbench  [kernel.kallsyms]                                       [k] __kmalloc_node_track_caller
> >      2.73%        hackbench  [kernel.kallsyms]                                       [k] __slab_free
> >      2.21%        hackbench  [kernel.kallsyms]                                       [k] get_partial_node
> >      2.01%        hackbench  [kernel.kallsyms]                                       [k] _raw_spin_lock
> >      1.59%        hackbench  [kernel.kallsyms]                                       [k] schedule
> >      1.27%        hackbench  hackbench                                               [.] receiver
> >      0.99%        hackbench  libpthread-2.9.so                                       [.] __read
> >      0.87%        hackbench  [kernel.kallsyms]                                       [k] unix_stream_sendmsg
> >
> > Kernel 2.6.34-rc3:
> >     18.55%        hackbench  [kernel.kallsyms]                                                     [k] copy_user_generic_str
> > ing
> >     13.19%        hackbench  [kernel.kallsyms]                                                     [k] unix_stream_recvmsg
> >     11.62%        hackbench  [kernel.kallsyms]                                                     [k] kfree
> >      8.54%        hackbench  [kernel.kallsyms]                                                     [k] kmem_cache_free
> >      7.88%        hackbench  [kernel.kallsyms]                                                     [k] __kmalloc_node_track_
> > caller
> 
> Seems that the overhead of __kmalloc_node_track_caller was increased. The
> function inlines slab_alloc().
> 
> >      6.54%        hackbench  [kernel.kallsyms]                                                     [k] kmem_cache_alloc_node
> >      5.94%        hackbench  [kernel.kallsyms]                                                     [k] kfree_skb
> >      3.48%        hackbench  [kernel.kallsyms]                                                     [k] __slab_free
> >      2.15%        hackbench  [kernel.kallsyms]                                                     [k] _raw_spin_lock
> >      1.83%        hackbench  [kernel.kallsyms]                                                     [k] schedule
> >      1.82%        hackbench  [kernel.kallsyms]                                                     [k] get_partial_node
> >      1.59%        hackbench  hackbench                                                             [.] receiver
> >      1.37%        hackbench  libpthread-2.9.so                                                     [.] __read
> 
> I wonder if this is not related to the kmem_cache_cpu structure straggling
> cache line boundaries under some conditions. On 2.6.33 the kmem_cache_cpu
> structure was larger and therefore tight packing resulted in different
> alignment.
> 
> Could you see how the following patch affects the results. It attempts to
> increase the size of kmem_cache_cpu to a power of 2 bytes. There is also
> the potential that other per cpu fetches to neighboring objects affect the
> situation. We could cacheline align the whole thing.
I tested the patch against 2.6.33+9dfc6e68bfe6e and it seems it doesn't help.

I dumped percpu allocation info when booting kernel and didn't find clear sign.

> 
> ---
>  include/linux/slub_def.h |    5 +++++
>  1 file changed, 5 insertions(+)
> 
> Index: linux-2.6/include/linux/slub_def.h
> ===================================================================
> --- linux-2.6.orig/include/linux/slub_def.h	2010-04-07 11:33:50.000000000 -0500
> +++ linux-2.6/include/linux/slub_def.h	2010-04-07 11:35:18.000000000 -0500
> @@ -38,6 +38,11 @@ struct kmem_cache_cpu {
>  	void **freelist;	/* Pointer to first free per cpu object */
>  	struct page *page;	/* The slab from which we are allocating */
>  	int node;		/* The node of the page (or -1 for debug) */
> +#ifndef CONFIG_64BIT
> +	int dummy1;
> +#endif
> +	unsigned long dummy2;
> +
>  #ifdef CONFIG_SLUB_STATS
>  	unsigned stat[NR_SLUB_STAT_ITEMS];
>  #endif

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Zhang, Yanmin]

On Tue, 2010-04-06 at 15:55 -0500, Christoph Lameter wrote:
> We cannot reproduce the issue here. Our tests here (dual quad dell) show a
> performance increase in hackbench instead.
I run hackbench on many machines. The regression exists on Nehalem machine
(dual sockets, 2*4*2 logical cpu) and a tigerton (4 socket, 4*4 logical cpu)
machines. I tried it on a dual quad core2 machine and it does like what you said.

The regression also exists on 2 new-generation Nehalem (dual socket 2*6*2 logical cpu)
machines.

It seems hyperthreading cpu has more chances to trigger it.

> 
> Linux 2.6.33.2 #2 SMP Mon Apr 5 11:30:56 CDT 2010 x86_64 GNU/Linux
> ./hackbench 100 process 200000
> Running with 100*40 (== 4000) tasks.
> Time: 3102.142
> ./hackbench 100 process 20000
> Running with 100*40 (== 4000) tasks.
> Time: 308.731
> ./hackbench 100 process 20000
> Running with 100*40 (== 4000) tasks.
> Time: 311.591
> ./hackbench 100 process 20000
> Running with 100*40 (== 4000) tasks.
> Time: 310.200
> ./hackbench 10 process 20000
> Running with 10*40 (== 400) tasks.
> Time: 38.048
> ./hackbench 10 process 20000
> Running with 10*40 (== 400) tasks.
> Time: 44.711
> ./hackbench 10 process 20000
> Running with 10*40 (== 400) tasks.
> Time: 39.407
> ./hackbench 1 process 20000
> Running with 1*40 (== 40) tasks.
> Time: 9.411
> ./hackbench 1 process 20000
> Running with 1*40 (== 40) tasks.
> Time: 8.765
> ./hackbench 1 process 20000
> Running with 1*40 (== 40) tasks.
> Time: 8.822
> 
> Linux 2.6.34-rc3 #1 SMP Tue Apr 6 13:30:34 CDT 2010 x86_64 GNU/Linux
> ./hackbench 100 process 200000
> Running with 100*40 (== 4000) tasks.
> Time: 3003.578
> ./hackbench 100 process 20000
> Running with 100*40 (== 4000) tasks.
> Time: 300.289
> ./hackbench 100 process 20000
> Running with 100*40 (== 4000) tasks.
> Time: 301.462
> ./hackbench 100 process 20000
> Running with 100*40 (== 4000) tasks.
> Time: 301.173
> ./hackbench 10 process 20000
> Running with 10*40 (== 400) tasks.
> Time: 41.191
> ./hackbench 10 process 20000
> Running with 10*40 (== 400) tasks.
> Time: 41.964
> ./hackbench 10 process 20000
> Running with 10*40 (== 400) tasks.
> Time: 41.470
> ./hackbench 1 process 20000
> Running with 1*40 (== 40) tasks.
> Time: 8.829
> ./hackbench 1 process 20000
> Running with 1*40 (== 40) tasks.
> Time: 9.166
> ./hackbench 1 process 20000
> Running with 1*40 (== 40) tasks.
> Time: 8.681
> 
> 

Re: hackbench regression due to commit 9dfc6e68bfe6e

[Zhang, Yanmin]

[-- Attachment #1: Type: text/plain, Size: 1727 bytes --]

On Tue, 2010-04-06 at 10:41 -0500, Christoph Lameter wrote:
> On Tue, 6 Apr 2010, Zhang, Yanmin wrote:
> 
> > Thanks. I tried 2 and 4 times and didn't see much improvement.
> > I checked /proc/vamallocinfo and it doesn't have item of pcpu_get_vm_areas
> > when I use 4 times of PERCPU_DYNAMIC_RESERVE.
> 
> > I used perf to collect dtlb misses and LLC misses. dtlb miss data is not
> > stable. Sometimes, we have a bigger dtlb miss, but get a better result.
> >
> > LLC misses data are more stable. Only LLC-load-misses is the clear sign now.
> > LLC-store-misses has no big difference.
> 
> LLC-load-miss is exactly what condition?
I don't know. I just said it's a clear sign. Otherwise, there is no clear sign.
The function statistics collected by perf with event llc-load-misses are very
scattered.

> 
> The cacheline environment in the hotpath should only include the following
> cache lines (without debugging and counters):
> 
> 1. The first cacheline from the kmem_cache structure
> 
> (This is different from the sitation before the 2.6.34 changes. Earlier
> some critical values (object length etc) where available
> from the kmem_cache_cpu structure.  The cacheline containing the percpu
> structure array was needed to determome the kmem_cache_cpu address!)
> 
> 2. The first cacheline from kmem_cache_cpu
> 
> 3. The first cacheline of the data object (free pointer)
> 
> And in case of a kfree/ kmem_cache_free:
> 
> 4. Cacheline that contains the page struct of the page the object resides
> in.
I agree with your analysis, but we still have no answer.

> 
> Can you post the .config you are using and the bootup messages?
> 

Pls. see the 2 attachment.

CONFIG_SLUB_STATS has no big impact on results.

Yanmin


[-- Attachment #2: 2.6.34-rc3-slubtj.dmesg --]
[-- Type: text/plain, Size: 57917 bytes --]

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.34-rc3-slubtj (ymzhang@lkp-ne01) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #2 SMP Tue Apr 6 14:52:57 CST 2010
Command line: ro root=/dev/sda1 selinux=0 console=tty0 console=ttyS0,115200 log_buf_len=16M slub_nomerge
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
 BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bf34a000 (usable)
 BIOS-e820: 00000000bf34a000 - 00000000bf3cb000 (ACPI NVS)
 BIOS-e820: 00000000bf3cb000 - 00000000bf3cc000 (ACPI data)
 BIOS-e820: 00000000bf3cc000 - 00000000bf3dd000 (reserved)
 BIOS-e820: 00000000bf3dd000 - 00000000bf3de000 (ACPI NVS)
 BIOS-e820: 00000000bf3de000 - 00000000bf3ef000 (reserved)
 BIOS-e820: 00000000bf3ef000 - 00000000bf3f2000 (ACPI NVS)
 BIOS-e820: 00000000bf3f2000 - 00000000bf449000 (reserved)
 BIOS-e820: 00000000bf449000 - 00000000bf454000 (ACPI data)
 BIOS-e820: 00000000bf454000 - 00000000bf45f000 (ACPI NVS)
 BIOS-e820: 00000000bf45f000 - 00000000bf47d000 (reserved)
 BIOS-e820: 00000000bf47d000 - 00000000bf680000 (ACPI NVS)
 BIOS-e820: 00000000bf680000 - 00000000bf800000 (usable)
 BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CBFFF write-protect
  CC000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask FE00000000 write-back
  1 base 01C0000000 mask FFC0000000 uncachable
  2 base 00C0000000 mask FFC0000000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf800 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fdee0] fdee0
init_memory_mapping: 0000000000000000-00000000bf800000
 0000000000 - 00bf800000 page 2M
kernel direct mapping tables up to bf800000 @ 16000-1a000
init_memory_mapping: 0000000100000000-00000001c0000000
 0100000000 - 01c0000000 page 2M
kernel direct mapping tables up to 1c0000000 @ 18000-20000
RAMDISK: 37c9b000 - 37ff0000
ACPI: RSDP 00000000000f03f0 00024 (v02 ALASKA)
ACPI: XSDT 00000000bf452e18 00084 (v01 ALASKA    A M I 06222004 MSFT 00010013)
ACPI: FACP 00000000bf451d98 000F4 (v04 ALASKA    A M I 06222004 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100121/tbfadt-369)
ACPI Warning: 32/64X FACS address mismatch in FADT - BF45BF40/00000000BF45CE40, using 32 (20100121/tbfadt-486)
ACPI: DSDT 00000000bf44a018 06877 (v01 ALASKA    A M I 00000001 INTL 20051117)
ACPI: FACS 00000000bf45bf40 00040
ACPI: APIC 00000000bf451c18 000E4 (v02 ALASKA    A M I 06222004 MSFT 00010013)
ACPI: MCFG 00000000bf453f18 0003C (v01 A M I  OEMMCFG  06222004 MSFT 00000097)
ACPI: SRAT 00000000bf449c18 003B0 (v01 A M I  AMI SRAT 00000000 AMI. 00000000)
ACPI: SLIT 00000000bf453e98 00030 (v01 A M I  AMI SLIT 00000000 AMI. 00000000)
ACPI: HPET 00000000bf453e18 00038 (v01 A M I  ICH7HPET 06222004 AMI. 00000003)
ACPI: SPMI 00000000bf453d98 00040 (v05 A M I   OEMSPMI 00000000 AMI. 00000000)
ACPI: EINJ 00000000bf451a98 00130 (v01    AMI AMI EINJ 00000000      00000000)
ACPI: ERST 00000000bf3cbc98 00210 (v01  AMIER AMI ERST 00000000      00000000)
ACPI: HEST 00000000bf3cbf18 000A8 (v01    AMI AMI HEST 00000000      00000000)
ACPI: BERT 00000000bf453d18 00030 (v01    AMI AMI BERT 00000000      00000000)
ACPI: DMAR 00000000bf452d18 000A0 (v01 A M I   OEMDMAR 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 1 -> APIC 0x10 -> Node 1
SRAT: PXM 1 -> APIC 0x11 -> Node 1
SRAT: PXM 1 -> APIC 0x12 -> Node 1
SRAT: PXM 1 -> APIC 0x13 -> Node 1
SRAT: PXM 1 -> APIC 0x14 -> Node 1
SRAT: PXM 1 -> APIC 0x15 -> Node 1
SRAT: PXM 1 -> APIC 0x16 -> Node 1
SRAT: PXM 1 -> APIC 0x17 -> Node 1
SRAT: Node 0 PXM 0 0-c0000000
SRAT: Node 1 PXM 1 100000000-1c0000000
NUMA: Using 32 for the hash shift.
Initmem setup node 0 0000000000000000-00000000c0000000
  NODE_DATA [0000000001c5a240 - 0000000001c5f23f]
Initmem setup node 1 0000000100000000-00000001c0000000
  NODE_DATA [0000000100000000 - 0000000100004fff]
 [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880002600000-ffff880004ffffff] on node 0
 [ffffea0003800000-ffffea00061fffff] PMD -> [ffff880100200000-ffff880102bfffff] on node 1
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x001c0000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x000bf34a
    0: 0x000bf680 -> 0x000bf800
    1: 0x00100000 -> 0x001c0000
On node 0 totalpages: 783447
  DMA zone: 56 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3925 pages, LIFO batch:0
  DMA32 zone: 10668 pages used for memmap
  DMA32 zone: 768798 pages, LIFO batch:31
On node 1 totalpages: 786432
  Normal zone: 10752 pages used for memmap
  Normal zone: 775680 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x17] enabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: IOAPIC (id[0x03] address[0xfec02000] gsi_base[48])
IOAPIC[2]: apic_id 3, version 32, address 0xfec02000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 16 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
early_res array is doubled to 64 at [1b040 - 1b83f]
Allocating PCI resources starting at d0000000 (gap: d0000000:2ed1c000)
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:16 nr_node_ids:2
early_res array is doubled to 128 at [1b840 - 1c83f]
PERCPU: Embedded 63 pages/cpu @ffff880001e00000 s82792 r8192 d167064 u262144
pcpu-alloc: s82792 r8192 d167064 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 02 04 06 08 10 12 14 [1] 01 03 05 07 09 11 13 15 
Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1548403
Policy zone: Normal
Kernel command line: ro root=/dev/sda1 selinux=0 console=tty0 console=ttyS0,115200 log_buf_len=16M slub_nomerge
log_buf_len: 16777216
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Subtract (81 early reservations)
  #1 [0001000000 - 0001c590e0]   TEXT DATA BSS
  #2 [0037c9b000 - 0037ff0000]         RAMDISK
  #3 [0001c5a000 - 0001c5a21c]             BRK
  #4 [00000fdef0 - 0000100000]   BIOS reserved
  #5 [00000fdee0 - 00000fdef0]    MP-table mpf
  #6 [000009d800 - 00000fda00]   BIOS reserved
  #7 [00000fde4c - 00000fdee0]   BIOS reserved
  #8 [00000fda00 - 00000fde4c]    MP-table mpc
  #9 [0000010000 - 0000012000]      TRAMPOLINE
  #10 [0000012000 - 0000016000]     ACPI WAKEUP
  #11 [0000016000 - 0000018000]         PGTABLE
  #12 [0000018000 - 000001b000]         PGTABLE
  #13 [000001b000 - 000001b030]       ACPI SLIT
  #14 [0001c5a240 - 0001c5f240]       NODE_DATA
  #15 [0100000000 - 0100005000]       NODE_DATA
  #16 [0001c5f240 - 0001c60240]         BOOTMEM
  #17 [0001c59100 - 0001c59340]         BOOTMEM
  #18 [0100005000 - 0100005240]         BOOTMEM
  #19 [0002461000 - 0002462000]         BOOTMEM
  #20 [0002462000 - 0002463000]         BOOTMEM
  #21 [0002600000 - 0005000000]        MEMMAP 0
  #22 [0100200000 - 0102c00000]        MEMMAP 1
  #23 [0001c59340 - 0001c594c0]         BOOTMEM
  #24 [0001c60240 - 0001c78240]         BOOTMEM
  #25 [0100005240 - 010001d240]         BOOTMEM
  #26 [0001c79000 - 0001c7a000]         BOOTMEM
  #27 [0001c594c0 - 0001c59501]         BOOTMEM
  #28 [0001c59540 - 0001c59609]         BOOTMEM
  #29 [0001c59640 - 0001c59ad8]         BOOTMEM
  #30 [0001c59b00 - 0001c59b68]         BOOTMEM
  #31 [0001c59b80 - 0001c59be8]         BOOTMEM
  #32 [0001c59c00 - 0001c59c68]         BOOTMEM
  #33 [0001c59c80 - 0001c59ce8]         BOOTMEM
  #34 [0001c59d00 - 0001c59d68]         BOOTMEM
  #35 [0001c59d80 - 0001c59de8]         BOOTMEM
  #36 [0001c59e00 - 0001c59e68]         BOOTMEM
  #37 [0001c59e80 - 0001c59ee8]         BOOTMEM
  #38 [0001c59f00 - 0001c59f68]         BOOTMEM
  #39 [0001c59f80 - 0001c59fe8]         BOOTMEM
  #40 [0001c78240 - 0001c782a8]         BOOTMEM
  #41 [0001c782c0 - 0001c78328]         BOOTMEM
  #42 [0001c78340 - 0001c783a8]         BOOTMEM
  #43 [0001c783c0 - 0001c78428]         BOOTMEM
  #44 [0001c78440 - 0001c784a8]         BOOTMEM
  #45 [0001c784c0 - 0001c78528]         BOOTMEM
  #46 [0001c78540 - 0001c785a8]         BOOTMEM
  #47 [0001c785c0 - 0001c78628]         BOOTMEM
  #48 [0001c78640 - 0001c786a8]         BOOTMEM
  #49 [0001c786c0 - 0001c78728]         BOOTMEM
  #50 [0001c78740 - 0001c7879b]         BOOTMEM
  #51 [0001c787c0 - 0001c7881b]         BOOTMEM
  #52 [0001e00000 - 0001e3f000]         BOOTMEM
  #53 [0001e40000 - 0001e7f000]         BOOTMEM
  #54 [0001e80000 - 0001ebf000]         BOOTMEM
  #55 [0001ec0000 - 0001eff000]         BOOTMEM
  #56 [0001f00000 - 0001f3f000]         BOOTMEM
  #57 [0001f40000 - 0001f7f000]         BOOTMEM
  #58 [0001f80000 - 0001fbf000]         BOOTMEM
  #59 [0001fc0000 - 0001fff000]         BOOTMEM
  #60 [0102c00000 - 0102c3f000]         BOOTMEM
  #61 [0102c40000 - 0102c7f000]         BOOTMEM
  #62 [0102c80000 - 0102cbf000]         BOOTMEM
  #63 [0102cc0000 - 0102cff000]         BOOTMEM
  #64 [0102d00000 - 0102d3f000]         BOOTMEM
  #65 [0102d40000 - 0102d7f000]         BOOTMEM
  #66 [0102d80000 - 0102dbf000]         BOOTMEM
  #67 [0102dc0000 - 0102dff000]         BOOTMEM
  #68 [0001c78840 - 0001c78850]         BOOTMEM
  #69 [0001c78880 - 0001c78890]         BOOTMEM
  #70 [0001c788c0 - 0001c78900]         BOOTMEM
  #71 [0001c78900 - 0001c78980]         BOOTMEM
  #72 [0001c78980 - 0001c78aa0]         BOOTMEM
  #73 [0001c78ac0 - 0001c78b08]         BOOTMEM
  #74 [0001c78b40 - 0001c78b88]         BOOTMEM
  #75 [0005000000 - 0006000000]         BOOTMEM
  #76 [0001c7a000 - 0001c82000]         BOOTMEM
  #77 [0006000000 - 000a000000]         BOOTMEM
  #78 [0001c82000 - 0001ca2000]         BOOTMEM
  #79 [0001ca2000 - 0001ce2000]         BOOTMEM
  #80 [000001c840 - 0000024840]         BOOTMEM
Memory: 6090732k/7340032k available (5784k kernel code, 1060516k absent, 188784k reserved, 5387k data, 568k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=2
Hierarchical RCU implementation.
NR_IRQS:1280
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2533.237 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5066.47 BogoMIPS (lpj=10132948)
Security Framework initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: Nehalem/Corei7 events, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
ACPI: Core revision 20100121
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU           E5540  @ 2.53GHz stepping 04
Booting Node   1, Processors  #1 Ok.
Booting Node   0, Processors  #2 Ok.
Booting Node   1, Processors  #3 Ok.
Booting Node   0, Processors  #4 Ok.
Booting Node   1, Processors  #5 Ok.
Booting Node   0, Processors  #6 Ok.
Booting Node   1, Processors  #7 Ok.
Booting Node   0, Processors  #8 Ok.
Booting Node   1, Processors  #9 Ok.
Booting Node   0, Processors  #10 Ok.
Booting Node   1, Processors  #11 Ok.
Booting Node   0, Processors  #12 Ok.
Booting Node   1, Processors  #13 Ok.
Booting Node   0, Processors  #14 Ok.
Booting Node   1, Processors  #15 Ok.
Brought up 16 CPUs
Total of 16 processors activated (81067.04 BogoMIPS).
khelper used greatest stack depth: 6080 bytes left
xor: automatically using best checksumming function: generic_sse
   generic_sse:  9462.000 MB/sec
xor: using function: generic_sse (9462.000 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
\_SB_:_OSC evaluation returned wrong type
_OSC request data:1 6 
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bf455018 01054 (v01    AMI      IST 00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:13.0: reg 10: [mem 0xfbf03000-0xfbf03fff]
pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
pci 0000:00:13.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xfffff1c000-0xfffff1ffff 64bit]
pci 0000:00:16.1: reg 10: [mem 0xfffff18000-0xfffff1bfff 64bit]
pci 0000:00:16.2: reg 10: [mem 0xfffff14000-0xfffff17fff 64bit]
pci 0000:00:16.3: reg 10: [mem 0xfffff10000-0xfffff13fff 64bit]
pci 0000:00:16.4: reg 10: [mem 0xfffff0c000-0xfffff0ffff 64bit]
pci 0000:00:16.5: reg 10: [mem 0xfffff08000-0xfffff0bfff 64bit]
pci 0000:00:16.6: reg 10: [mem 0xfffff04000-0xfffff07fff 64bit]
pci 0000:00:16.7: reg 10: [mem 0xfffff00000-0xfffff03fff 64bit]
pci 0000:00:1a.0: reg 20: [io  0xf0e0-0xf0ff]
pci 0000:00:1a.1: reg 20: [io  0xf0c0-0xf0df]
pci 0000:00:1a.2: reg 20: [io  0xf0a0-0xf0bf]
pci 0000:00:1a.7: reg 10: [mem 0xfbf02000-0xfbf023ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0xf080-0xf09f]
pci 0000:00:1d.1: reg 20: [io  0xf060-0xf07f]
pci 0000:00:1d.2: reg 20: [io  0xf040-0xf05f]
pci 0000:00:1d.7: reg 10: [mem 0xfbf01000-0xfbf013ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0600 (mask 00ff)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 001f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0ca0 (mask 000f)
pci 0000:00:1f.2: reg 10: [io  0xf130-0xf137]
pci 0000:00:1f.2: reg 14: [io  0xf120-0xf123]
pci 0000:00:1f.2: reg 18: [io  0xf110-0xf117]
pci 0000:00:1f.2: reg 1c: [io  0xf100-0xf103]
pci 0000:00:1f.2: reg 20: [io  0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xfbf00000-0xfbf007ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xfffff20000-0xfffff200ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0xf000-0xf01f]
pci 0000:01:00.0: reg 10: [mem 0xfbea0000-0xfbebffff]
pci 0000:01:00.0: reg 14: [mem 0xfbe80000-0xfbe9ffff]
pci 0000:01:00.0: reg 18: [io  0xe020-0xe03f]
pci 0000:01:00.0: reg 1c: [mem 0xfbec4000-0xfbec7fff]
pci 0000:01:00.0: reg 30: [mem 0xfbe60000-0xfbe7ffff pref]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.1: reg 10: [mem 0xfbe40000-0xfbe5ffff]
pci 0000:01:00.1: reg 14: [mem 0xfbe20000-0xfbe3ffff]
pci 0000:01:00.1: reg 18: [io  0xe000-0xe01f]
pci 0000:01:00.1: reg 1c: [mem 0xfbec0000-0xfbec3fff]
pci 0000:01:00.1: reg 30: [mem 0xfbe00000-0xfbe1ffff pref]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: PME# disabled
pci 0000:00:01.0: PCI bridge to [bus 01-02]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:03.0: PCI bridge to [bus 03-03]
pci 0000:00:03.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xfbda0000-0xfbdbffff]
pci 0000:04:00.0: reg 14: [mem 0xfbd40000-0xfbd7ffff]
pci 0000:04:00.0: reg 18: [io  0xd020-0xd03f]
pci 0000:04:00.0: reg 1c: [mem 0xfbdc4000-0xfbdc7fff]
pci 0000:04:00.0: PME# supported from D0 D3hot
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10: [mem 0xfbd80000-0xfbd9ffff]
pci 0000:04:00.1: reg 14: [mem 0xfbd00000-0xfbd3ffff]
pci 0000:04:00.1: reg 18: [io  0xd000-0xd01f]
pci 0000:04:00.1: reg 1c: [mem 0xfbdc0000-0xfbdc3fff]
pci 0000:04:00.1: PME# supported from D0 D3hot
pci 0000:04:00.1: PME# disabled
pci 0000:00:05.0: PCI bridge to [bus 04-04]
pci 0000:00:05.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:05.0:   bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:05.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:07.0: PCI bridge to [bus 05-05]
pci 0000:00:07.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:07.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:07.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:06:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:06:00.2: PXH quirk detected; SHPC device MSI disabled
pci 0000:06:00.2: PME# supported from D0 D3hot D3cold
pci 0000:06:00.2: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 06-08]
pci 0000:00:09.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:09.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:09.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:06:00.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:06:00.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:06:00.2: PCI bridge to [bus 08-08]
pci 0000:06:00.2:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:06:00.2:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:06:00.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.0: PCI bridge to [bus 09-09]
pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0a:00.0: reg 10: [io  0xc040-0xc047]
pci 0000:0a:00.0: reg 14: [io  0xc030-0xc033]
pci 0000:0a:00.0: reg 18: [io  0xc020-0xc027]
pci 0000:0a:00.0: reg 1c: [io  0xc010-0xc013]
pci 0000:0a:00.0: reg 20: [io  0xc000-0xc00f]
pci 0000:0a:00.0: reg 30: [mem 0xfbc00000-0xfbc0ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.4:   bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.5: PCI bridge to [bus 0b-0b]
pci 0000:00:1c.5:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0c:01.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
pci 0000:0c:01.0: reg 14: [io  0xb000-0xb0ff]
pci 0000:0c:01.0: reg 18: [mem 0xfbb20000-0xfbb2ffff]
pci 0000:0c:01.0: reg 30: [mem 0xfbb00000-0xfbb1ffff pref]
pci 0000:0c:01.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1e.0:   bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
pci 0000:00:02.0: PCI bridge to [bus 0d-ff]
pci 0000:00:02.0:   bridge window [io  0x0000-0x0000] (disabled)
pci 0000:00:02.0:   bridge window [mem 0x00000000-0x000fffff] (disabled)
pci 0000:00:02.0:   bridge window [mem 0x00000000-0x000fffff pref] (disabled)
pci 0000:00:04.0: PCI bridge to [bus 0e-ff]
pci 0000:00:04.0:   bridge window [io  0x0000-0x0000] (disabled)
pci 0000:00:04.0:   bridge window [mem 0x00000000-0x000fffff] (disabled)
pci 0000:00:04.0:   bridge window [mem 0x00000000-0x000fffff pref] (disabled)
pci 0000:00:06.0: PCI bridge to [bus 0f-ff]
pci 0000:00:06.0:   bridge window [io  0x0000-0x0000] (disabled)
pci 0000:00:06.0:   bridge window [mem 0x00000000-0x000fffff] (disabled)
pci 0000:00:06.0:   bridge window [mem 0x00000000-0x000fffff pref] (disabled)
pci 0000:00:08.0: PCI bridge to [bus 10-ff]
pci 0000:00:08.0:   bridge window [io  0x0000-0x0000] (disabled)
pci 0000:00:08.0:   bridge window [mem 0x00000000-0x000fffff] (disabled)
pci 0000:00:08.0:   bridge window [mem 0x00000000-0x000fffff pref] (disabled)
pci 0000:00:0a.0: PCI bridge to [bus 11-ff]
pci 0000:00:0a.0:   bridge window [io  0x0000-0x0000] (disabled)
pci 0000:00:0a.0:   bridge window [mem 0x00000000-0x000fffff] (disabled)
pci 0000:00:0a.0:   bridge window [mem 0x00000000-0x000fffff pref] (disabled)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9.PXHB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9.PXHA._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
vgaarb: device added: PCI:0000:0c:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int64x1   2571 MB/s
raid6: int64x2   2488 MB/s
raid6: int64x4   2157 MB/s
raid6: int64x8   1666 MB/s
raid6: sse2x1    6216 MB/s
raid6: sse2x2    7231 MB/s
raid6: sse2x4    8190 MB/s
raid6: using algorithm sse2x4 (8190 MB/s)
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:16.0: no compatible bridge window for [mem 0xfffff1c000-0xfffff1ffff 64bit]
pci 0000:00:16.1: no compatible bridge window for [mem 0xfffff18000-0xfffff1bfff 64bit]
pci 0000:00:16.2: no compatible bridge window for [mem 0xfffff14000-0xfffff17fff 64bit]
pci 0000:00:16.3: no compatible bridge window for [mem 0xfffff10000-0xfffff13fff 64bit]
pci 0000:00:16.4: no compatible bridge window for [mem 0xfffff0c000-0xfffff0ffff 64bit]
pci 0000:00:16.5: no compatible bridge window for [mem 0xfffff08000-0xfffff0bfff 64bit]
pci 0000:00:16.6: no compatible bridge window for [mem 0xfffff04000-0xfffff07fff 64bit]
pci 0000:00:16.7: no compatible bridge window for [mem 0xfffff00000-0xfffff03fff 64bit]
pci 0000:00:1f.3: no compatible bridge window for [mem 0xfffff20000-0xfffff200ff 64bit]
reserve RAM buffer: 000000000009d800 - 000000000009ffff 
reserve RAM buffer: 00000000bf34a000 - 00000000bfffffff 
reserve RAM buffer: 00000000bf800000 - 00000000bfffffff 
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfe9fffff] has been reserved
system 00:01: [mem 0xfea00000-0xfea0001f] has been reserved
system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:01: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:02: [io  0x0290-0x029f] has been reserved
system 00:0a: [io  0x04d0-0x04d1] has been reserved
system 00:0c: [io  0x0400-0x047f] has been reserved
system 00:0c: [io  0x1180-0x119f] has been reserved
system 00:0c: [io  0x0500-0x057f] could not be reserved
system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0c: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:00:1c.0: BAR 8: assigned [mem 0xd0000000-0xd01fffff]
pci 0000:00:1c.0: BAR 9: assigned [mem 0xd0200000-0xd03fffff 64bit pref]
pci 0000:00:1c.4: BAR 9: assigned [mem 0xd0400000-0xd05fffff 64bit pref]
pci 0000:00:16.0: BAR 0: assigned [mem 0x000a0000-0x000a3fff 64bit]
pci 0000:00:16.0: BAR 0: set to [mem 0x000a0000-0x000a3fff 64bit] (PCI address [0xa0000-0xa3fff]
pci 0000:00:16.1: BAR 0: assigned [mem 0x000a4000-0x000a7fff 64bit]
pci 0000:00:16.1: BAR 0: set to [mem 0x000a4000-0x000a7fff 64bit] (PCI address [0xa4000-0xa7fff]
pci 0000:00:16.2: BAR 0: assigned [mem 0x000a8000-0x000abfff 64bit]
pci 0000:00:16.2: BAR 0: set to [mem 0x000a8000-0x000abfff 64bit] (PCI address [0xa8000-0xabfff]
pci 0000:00:16.3: BAR 0: assigned [mem 0x000ac000-0x000affff 64bit]
pci 0000:00:16.3: BAR 0: set to [mem 0x000ac000-0x000affff 64bit] (PCI address [0xac000-0xaffff]
pci 0000:00:16.4: BAR 0: assigned [mem 0x000b0000-0x000b3fff 64bit]
pci 0000:00:16.4: BAR 0: set to [mem 0x000b0000-0x000b3fff 64bit] (PCI address [0xb0000-0xb3fff]
pci 0000:00:16.5: BAR 0: assigned [mem 0x000b4000-0x000b7fff 64bit]
pci 0000:00:16.5: BAR 0: set to [mem 0x000b4000-0x000b7fff 64bit] (PCI address [0xb4000-0xb7fff]
pci 0000:00:16.6: BAR 0: assigned [mem 0x000b8000-0x000bbfff 64bit]
pci 0000:00:16.6: BAR 0: set to [mem 0x000b8000-0x000bbfff 64bit] (PCI address [0xb8000-0xbbfff]
pci 0000:00:16.7: BAR 0: assigned [mem 0x000bc000-0x000bffff 64bit]
pci 0000:00:16.7: BAR 0: set to [mem 0x000bc000-0x000bffff 64bit] (PCI address [0xbc000-0xbffff]
pci 0000:00:1c.0: BAR 7: assigned [io  0x2000-0x2fff]
pci 0000:00:1f.3: BAR 0: assigned [mem 0xd0600000-0xd06000ff 64bit]
pci 0000:00:1f.3: BAR 0: set to [mem 0xd0600000-0xd06000ff 64bit] (PCI address [0xd0600000-0xd06000ff]
pci 0000:00:01.0: PCI bridge to [bus 01-02]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:01.0:   bridge window [mem pref disabled]
pci 0000:00:02.0: PCI bridge to [bus 0d-0d]
pci 0000:00:02.0:   bridge window [io  disabled]
pci 0000:00:02.0:   bridge window [mem disabled]
pci 0000:00:02.0:   bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 03-03]
pci 0000:00:03.0:   bridge window [io  disabled]
pci 0000:00:03.0:   bridge window [mem disabled]
pci 0000:00:03.0:   bridge window [mem pref disabled]
pci 0000:00:04.0: PCI bridge to [bus 0e-0e]
pci 0000:00:04.0:   bridge window [io  disabled]
pci 0000:00:04.0:   bridge window [mem disabled]
pci 0000:00:04.0:   bridge window [mem pref disabled]
pci 0000:00:05.0: PCI bridge to [bus 04-04]
pci 0000:00:05.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:05.0:   bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:05.0:   bridge window [mem pref disabled]
pci 0000:00:06.0: PCI bridge to [bus 0f-0f]
pci 0000:00:06.0:   bridge window [io  disabled]
pci 0000:00:06.0:   bridge window [mem disabled]
pci 0000:00:06.0:   bridge window [mem pref disabled]
pci 0000:00:07.0: PCI bridge to [bus 05-05]
pci 0000:00:07.0:   bridge window [io  disabled]
pci 0000:00:07.0:   bridge window [mem disabled]
pci 0000:00:07.0:   bridge window [mem pref disabled]
pci 0000:00:08.0: PCI bridge to [bus 10-10]
pci 0000:00:08.0:   bridge window [io  disabled]
pci 0000:00:08.0:   bridge window [mem disabled]
pci 0000:00:08.0:   bridge window [mem pref disabled]
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0:   bridge window [io  disabled]
pci 0000:06:00.0:   bridge window [mem disabled]
pci 0000:06:00.0:   bridge window [mem pref disabled]
pci 0000:06:00.2: PCI bridge to [bus 08-08]
pci 0000:06:00.2:   bridge window [io  disabled]
pci 0000:06:00.2:   bridge window [mem disabled]
pci 0000:06:00.2:   bridge window [mem pref disabled]
pci 0000:00:09.0: PCI bridge to [bus 06-08]
pci 0000:00:09.0:   bridge window [io  disabled]
pci 0000:00:09.0:   bridge window [mem disabled]
pci 0000:00:09.0:   bridge window [mem pref disabled]
pci 0000:00:0a.0: PCI bridge to [bus 11-11]
pci 0000:00:0a.0:   bridge window [io  disabled]
pci 0000:00:0a.0:   bridge window [mem disabled]
pci 0000:00:0a.0:   bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 09-09]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd01fffff]
pci 0000:00:1c.0:   bridge window [mem 0xd0200000-0xd03fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.4:   bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.4:   bridge window [mem 0xd0400000-0xd05fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 0b-0b]
pci 0000:00:1c.5:   bridge window [io  disabled]
pci 0000:00:1c.5:   bridge window [mem disabled]
pci 0000:00:1c.5:   bridge window [mem pref disabled]
pci 0000:00:1e.0: PCI bridge to [bus 0c-0c]
pci 0000:00:1e.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1e.0:   bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:08.0: setting latency timer to 64
pci 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:09.0: setting latency timer to 64
pci 0000:06:00.0: setting latency timer to 64
pci 0000:06:00.2: setting latency timer to 64
pci 0000:00:0a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:0a.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0000 -> 0003)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:09: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:09: resource 1 [mem 0xd0000000-0xd01fffff]
pci_bus 0000:09: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref]
pci_bus 0000:0a: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:0a: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:0a: resource 2 [mem 0xd0400000-0xd05fffff 64bit pref]
pci_bus 0000:0c: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:0c: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
pci_bus 0000:0c: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:0c: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0c: resource 7 [mem 0xc0000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:04:00.0: Disabling L0s
pci 0000:04:00.1: Disabling L0s
pci 0000:0c:01.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3412k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880006000000 - ffff88000a000000
software IO TLB at phys 0x6000000 - 0xa000000
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Slow work thread pool: Starting up
Slow work thread pool: Ready
ROMFS MTD (C) 2007 Red Hat, Inc.
fuse init (API version 7.13)
msgmni has been set to 11902
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 72 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 73 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:03.0: irq 74 for MSI/MSI-X
pcieport 0000:00:04.0: setting latency timer to 64
pcieport 0000:00:04.0: irq 75 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
pcieport 0000:00:05.0: irq 76 for MSI/MSI-X
pcieport 0000:00:06.0: setting latency timer to 64
pcieport 0000:00:06.0: irq 77 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
pcieport 0000:00:07.0: irq 78 for MSI/MSI-X
pcieport 0000:00:08.0: setting latency timer to 64
pcieport 0000:00:08.0: irq 79 for MSI/MSI-X
pcieport 0000:00:09.0: setting latency timer to 64
pcieport 0000:00:09.0: irq 80 for MSI/MSI-X
pcieport 0000:00:0a.0: setting latency timer to 64
pcieport 0000:00:0a.0: irq 81 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 82 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 83 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 84 for MSI/MSI-X
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
aer 0000:00:04.0:pcie02: service driver aer loaded
aer 0000:00:05.0:pcie02: service driver aer loaded
aer 0000:00:06.0:pcie02: service driver aer loaded
aer 0000:00:07.0:pcie02: service driver aer loaded
aer 0000:00:08.0:pcie02: service driver aer loaded
aer 0000:00:09.0:pcie02: service driver aer loaded
aer 0000:00:0a.0:pcie02: service driver aer loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Firmware did not grant requested _OSC control
Firmware did not grant requested _OSC control
Firmware did not grant requested _OSC control
Firmware did not grant requested _OSC control
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vga16fb: initializing
vga16fb: mapped to 0xffff8800000a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
input: Sleep Button as /class/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /class/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /class/input/input2
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-3 state
Monitor-Mwait will be used to enter C-3 state
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
ide-cd driver 5.00
Loading iSCSI transport class v2.0-870.
Adaptec aacraid driver 1.1-5[24702]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.17.1-rc1 Thu. Oct. 29, 11:41:51 PST 2009
GDT-HA: Storage RAID Controller Driver. Version: 3.05
RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 85 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ccc ems sxs 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbf00000 port 0xfbf00100 irq 85
ata2: SATA max UDMA/133 abar m2048@0xfbf00000 port 0xfbf00180 irq 85
ata3: SATA max UDMA/133 abar m2048@0xfbf00000 port 0xfbf00200 irq 85
ata4: SATA max UDMA/133 abar m2048@0xfbf00000 port 0xfbf00280 irq 85
ata5: SATA max UDMA/133 abar m2048@0xfbf00000 port 0xfbf00300 irq 85
ata6: SATA max UDMA/133 abar m2048@0xfbf00000 port 0xfbf00380 irq 85
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
Fusion MPT base driver 3.04.14
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.14
Fusion MPT FC Host driver 3.04.14
Fusion MPT SAS Host driver 3.04.14
Fusion MPT misc device (ioctl) driver 3.04.14
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbf02000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-6: ST3500320NS, SN04, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: ATA-6: ST3160827AS, 3.42, max UDMA/133
ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST3500320NS      SN04 PQ: 0 ANSI: 5
ata3.00: configured for UDMA/133
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133
ata2.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      HDT722516DLA380  V43O PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 321672960 512-byte logical blocks: (164 GB/153 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi 2:0:0:0: Direct-Access     ATA      ST3160827AS      3.42 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg2 type 0
ata4.00: ATA-7: ST380815AS, 3.AAC, max UDMA/133
ata4.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      ST380815AS       3.AA PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: Attached scsi generic sg3 type 0
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: SlimtypeDVD A  DS8A1P, CX17, max UDMA/33
ata6.00: applying bridge limits
ata6.00: configured for UDMA/33
scsi 5:0:0:0: CD-ROM            Slimtype DVD A  DS8A1P    CX17 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg4 type 5
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
async/3 used greatest stack depth: 5392 bytes left
 sdc:
 sdd: sdc1 sdc2 sdc3
 sdd1 sdd2
 sdb:
sd 3:0:0:0: [sdd] Attached SCSI disk
sd 2:0:0:0: [sdc] Attached SCSI disk
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
 sdb1 sdb2 sdb3
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
sd 1:0:0:0: [sdb] Attached SCSI disk
 sda:
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbf01000
 sda1 sda2 sda3 sda4 <
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
 sda5
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0e0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f0c0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000f0a0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:08: RTC can wake from S4
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.1.1 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
EDAC MC: Ver: 2.1.0 Apr  6 2010
 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
cpuidle: using governor ladder
async/5 used greatest stack depth: 5120 bytes left
usb 6-1: new low speed USB device using uhci_hcd and address 2
async/1 used greatest stack depth: 5104 bytes left
cpuidle: using governor menu
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
usbcore: registered new interface driver hiddev
input:   USB Keyboard as /class/input/input3
generic-usb 0003:04D9:1702.0001: input: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1d.0-1/input0
input:   USB Keyboard as /class/input/input4
generic-usb 0003:04D9:1702.0002: input: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1d.0-1/input1
input:   USB Keyboard as /class/input/input5
generic-usb 0003:04D9:1702.0003: input: USB HID v1.10 Mouse [  USB Keyboard] on usb-0000:00:1d.0-1/input2
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
oprofile: using NMI interrupt.
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
SCTP: Hash tables configured (established 65536 bind 65536)
registered taskstats version 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc)
BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
Freeing unused kernel memory: 568k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 340k freed
Freeing unused kernel memory: 1136k freed
EXT4-fs (sda1): mounted filesystem with ordered data mode
modprobe used greatest stack depth: 4872 bytes left
udev: starting version 145
<3>udev: missing sysfs features; please update the kernel or disable the kernel's CONFIG_SYSFS_DEPRECATED option; udev may fail to work correctly
Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2
Copyright (c) 2007-2009 Intel Corporation.
igb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
igb 0000:01:00.0: setting latency timer to 64
igb 0000:01:00.0: irq 86 for MSI/MSI-X
igb 0000:01:00.0: irq 87 for MSI/MSI-X
igb 0000:01:00.0: irq 88 for MSI/MSI-X
igb 0000:01:00.0: irq 89 for MSI/MSI-X
igb 0000:01:00.0: irq 90 for MSI/MSI-X
igb 0000:01:00.0: irq 91 for MSI/MSI-X
igb 0000:01:00.0: irq 92 for MSI/MSI-X
igb 0000:01:00.0: irq 93 for MSI/MSI-X
igb 0000:01:00.0: irq 94 for MSI/MSI-X
igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:30:48:c5:eb:e2
igb 0000:01:00.0: eth0: PBA No: 0010ff-0ff
igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
igb 0000:01:00.1: setting latency timer to 64
igb 0000:01:00.1: irq 95 for MSI/MSI-X
igb 0000:01:00.1: irq 96 for MSI/MSI-X
igb 0000:01:00.1: irq 97 for MSI/MSI-X
igb 0000:01:00.1: irq 98 for MSI/MSI-X
igb 0000:01:00.1: irq 99 for MSI/MSI-X
igb 0000:01:00.1: irq 100 for MSI/MSI-X
igb 0000:01:00.1: irq 101 for MSI/MSI-X
igb 0000:01:00.1: irq 102 for MSI/MSI-X
igb 0000:01:00.1: irq 103 for MSI/MSI-X
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 2.0.62-k2
ixgbe: Copyright (c) 1999-2010 Intel Corporation.
ixgbe 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ixgbe 0000:04:00.0: setting latency timer to 64
igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:c5:eb:e3
igb 0000:01:00.1: eth1: PBA No: 0010ff-0ff
igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
ixgbe 0000:04:00.0: irq 104 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 105 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 106 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 107 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 108 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 109 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 110 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 111 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 112 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 113 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 114 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 115 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 116 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 117 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 118 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 119 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 120 for MSI/MSI-X
ixgbe: 0000:04:00.0: ixgbe_init_interrupt_scheme: Multiqueue Enabled: Rx Queue count = 16, Tx Queue count = 16
ixgbe 0000:04:00.0: (PCI Express:2.5Gb/s:Width x8) 00:1b:21:29:17:f1
ixgbe 0000:04:00.0: MAC: 1, PHY: 5, PBA No: e27462-006
ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection
ixgbe 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ixgbe 0000:04:00.1: setting latency timer to 64
ixgbe 0000:04:00.1: irq 121 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 122 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 123 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 124 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 125 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 126 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 127 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 128 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 129 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 130 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 131 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 132 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 133 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 134 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 135 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 136 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 137 for MSI/MSI-X
ixgbe: 0000:04:00.1: ixgbe_init_interrupt_scheme: Multiqueue Enabled: Rx Queue count = 16, Tx Queue count = 16
ixgbe 0000:04:00.1: (PCI Express:2.5Gb/s:Width x8) 00:1b:21:29:17:f0
ixgbe 0000:04:00.1: MAC: 1, PHY: 5, PBA No: e27462-006
ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection
start_udev used greatest stack depth: 4680 bytes left
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdb2): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sdb2): using internal journal
EXT3-fs (sdb2): mounted filesystem with writeback data mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdb3): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sdb3): using internal journal
EXT3-fs (sdb3): mounted filesystem with writeback data mode
Adding 15631208k swap on /dev/sda5.  Priority:-1 extents:1 across:15631208k 
ADDRCONF(NETDEV_UP): eth0: link is not ready
igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present

[-- Attachment #3: 2.6.34-rc3_config --]
[-- Type: text/x-mpsub, Size: 60213 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.34-rc3
# Tue Apr  6 14:05:15 2010
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_EARLY_RES=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-thiscpu"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
# CONFIG_AUDIT is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_EVENTS_NMI=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_OPTPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y

#
# GCOV-based kernel profiling
#
CONFIG_SLOW_WORK=y
# CONFIG_SLOW_WORK_DEBUG is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=7
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=32
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
# CONFIG_K8_NUMA is not set
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y

#
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_PM_OPS=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
# CONFIG_TCP_CONG_CUBIC is not set
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_CS5535_MFGPT is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_ATIIXP=y
CONFIG_BLK_DEV_CMD64X=y
CONFIG_BLK_DEV_TRIFLEX=y
CONFIG_BLK_DEV_CS5520=y
CONFIG_BLK_DEV_CS5530=y
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
CONFIG_BLK_DEV_IT821X=y
# CONFIG_BLK_DEV_NS87415 is not set
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
CONFIG_SCSI_ACARD=y
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
CONFIG_MEGARAID_LEGACY=y
CONFIG_MEGARAID_SAS=y
# CONFIG_SCSI_MPT2SAS is not set
CONFIG_SCSI_HPTIOP=y
CONFIG_SCSI_BUSLOGIC=y
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_RAID6_PQ=y
# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=y
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#

#
# You can enable one or both FireWire driver stacks.
#

#
# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
CONFIG_IGB=m
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_BNX2=y
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
CONFIG_MDIO=m
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
CONFIG_IXGBE=m
# CONFIG_IXGBEVF is not set
CONFIG_IXGB=m
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_WINBOND_CIR is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set

#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# Special HID drivers
#
# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set

#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_AMD64 is not set
CONFIG_EDAC_E752X=y
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set

#
# TI VLYNQ
#
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_FS_XIP=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_NMI_WATCHDOG is not set
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_SLUB_STATS=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_KSYM_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set

#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VHOST_NET is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y