* [PATCH 03/11] ARM: U300: set f_max to 24 MHz for MMCI
@ 2010-04-07 23:12 ` Linus Walleij
0 siblings, 0 replies; 2+ messages in thread
From: Linus Walleij @ 2010-04-07 23:12 UTC (permalink / raw)
To: akpm, Russell King - ARM Linux, Grant Likely, Dan Williams
Cc: linux-arm-kernel, linux-mmc, STEricsson_nomadik_linux,
linux-kernel, Linus Walleij
This employs the frequency setting mechanism introduced to the
MMCI to specify that this system can actually be clocked at 24 MHz.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
---
arch/arm/mach-u300/mmc.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index c2549b8..88506d0 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -102,6 +102,7 @@ int __devinit mmc_init(struct amba_device *adev)
* we have a regulator we can control instead.
*/
/* Nominally 2.85V on our platform */
+ mmci_card->mmc0_plat_data.f_max = 24000000;
mmci_card->mmc0_plat_data.status = mmc_status;
mmci_card->mmc0_plat_data.gpio_wp = -1;
mmci_card->mmc0_plat_data.gpio_cd = -1;
--
1.6.3.3
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH 03/11] ARM: U300: set f_max to 24 MHz for MMCI
@ 2010-04-07 23:12 ` Linus Walleij
0 siblings, 0 replies; 2+ messages in thread
From: Linus Walleij @ 2010-04-07 23:12 UTC (permalink / raw)
To: linux-arm-kernel
This employs the frequency setting mechanism introduced to the
MMCI to specify that this system can actually be clocked at 24 MHz.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
---
arch/arm/mach-u300/mmc.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index c2549b8..88506d0 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -102,6 +102,7 @@ int __devinit mmc_init(struct amba_device *adev)
* we have a regulator we can control instead.
*/
/* Nominally 2.85V on our platform */
+ mmci_card->mmc0_plat_data.f_max = 24000000;
mmci_card->mmc0_plat_data.status = mmc_status;
mmci_card->mmc0_plat_data.gpio_wp = -1;
mmci_card->mmc0_plat_data.gpio_cd = -1;
--
1.6.3.3
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-04-07 23:13 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-04-07 23:12 [PATCH 03/11] ARM: U300: set f_max to 24 MHz for MMCI Linus Walleij
2010-04-07 23:12 ` Linus Walleij
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.