All of lore.kernel.org
 help / color / mirror / Atom feed
* BCM43224 802.11a/b/g/
@ 2010-04-16  5:15 Rodd Clarkson
  2010-04-16 15:38 ` Larry Finger
  0 siblings, 1 reply; 2+ messages in thread
From: Rodd Clarkson @ 2010-04-16  5:15 UTC (permalink / raw)
  To: b43-dev

Hi All,

New to this list, but noticed that my card (a BCM43224) wasn't listed on
the http://wireless.kernel.org/en/users/Drivers/b43 page (even though
I'm sure it's going to be listed as supported)

Just thought this chip should be included under
http://wireless.kernel.org/en/users/Drivers/b43#Known_PCI_devices

PCI-ID: 14e4:4353
State: not supported (I assume this is the case)
Chip: BCM43224 (Or is it just BCM4322?)
Modes: a/b/g/n
PHY version: N
Driver: presume this will be b43


Rodd


Here's the details:

$ uname -a
Linux moose.localdomain 2.6.33.2-41.fc13.x86_64 #1 SMP Mon Apr 12
14:09:42 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux

$ sudo lspci -vvn|grep 43 -A7
[sudo] password for rodd: 
04:00.0 0280: 14e4:4353 (rev 01)
	Subsystem: 1028:000e
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory@f0500000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [40] Power Management version 3


I'm not sure if dmesg is needed for this and it's quite a bit of text.
Ask if you want it.

^ permalink raw reply	[flat|nested] 2+ messages in thread

* BCM43224 802.11a/b/g/
  2010-04-16  5:15 BCM43224 802.11a/b/g/ Rodd Clarkson
@ 2010-04-16 15:38 ` Larry Finger
  0 siblings, 0 replies; 2+ messages in thread
From: Larry Finger @ 2010-04-16 15:38 UTC (permalink / raw)
  To: b43-dev

On 04/16/2010 12:15 AM, Rodd Clarkson wrote:
> Hi All,
> 
> New to this list, but noticed that my card (a BCM43224) wasn't listed on
> the http://wireless.kernel.org/en/users/Drivers/b43 page (even though
> I'm sure it's going to be listed as supported)
--snip--
> 
> I'm not sure if dmesg is needed for this and it's quite a bit of text.
> Ask if you want it.

No, the dmesg output will not be needed. I have just updated the table
on the web page. At present, we do not support any N PHY devices. Quite
a bit of the code has been written and is in the wireless-testing tree;
however, not enough for it to work yet.

Larry

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2010-04-16 15:38 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-04-16  5:15 BCM43224 802.11a/b/g/ Rodd Clarkson
2010-04-16 15:38 ` Larry Finger

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.