From: Marek Szyprowski <m.szyprowski@samsung.com>
To: linux-samsung-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: m.szyprowski@samsung.com, kyungmin.park@samsung.com,
ben-linux@fluff.org, kgene.kim@samsung.com
Subject: [PATCH 11/11] ARM: remove obsolete plat-s5pc1xx directory
Date: Tue, 18 May 2010 12:38:49 +0200 [thread overview]
Message-ID: <1274179129-14659-12-git-send-email-m.szyprowski@samsung.com> (raw)
In-Reply-To: <1274179129-14659-1-git-send-email-m.szyprowski@samsung.com>
This patch removes all obsolete files from plat-s5pc1xx. This directory is
no longer needed. S5PC100 SoC is now completely supported in plat-s5p
framework.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
arch/arm/plat-s5pc1xx/Kconfig | 42 --
arch/arm/plat-s5pc1xx/Makefile | 25 -
arch/arm/plat-s5pc1xx/clock.c | 709 ------------------
arch/arm/plat-s5pc1xx/cpu.c | 122 ----
arch/arm/plat-s5pc1xx/dev-uart.c | 145 ----
arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h | 44 --
arch/arm/plat-s5pc1xx/include/plat/irqs.h | 198 -----
arch/arm/plat-s5pc1xx/include/plat/pll.h | 38 -
arch/arm/plat-s5pc1xx/include/plat/regs-clock.h | 252 -------
arch/arm/plat-s5pc1xx/include/plat/regs-power.h | 84 ---
arch/arm/plat-s5pc1xx/include/plat/s5pc100.h | 64 --
arch/arm/plat-s5pc1xx/irq-eint.c | 281 --------
arch/arm/plat-s5pc1xx/irq.c | 75 --
arch/arm/plat-s5pc1xx/s5pc100-clock.c | 876 -----------------------
14 files changed, 0 insertions(+), 2955 deletions(-)
delete mode 100644 arch/arm/plat-s5pc1xx/Kconfig
delete mode 100644 arch/arm/plat-s5pc1xx/Makefile
delete mode 100644 arch/arm/plat-s5pc1xx/clock.c
delete mode 100644 arch/arm/plat-s5pc1xx/cpu.c
delete mode 100644 arch/arm/plat-s5pc1xx/dev-uart.c
delete mode 100644 arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
delete mode 100644 arch/arm/plat-s5pc1xx/include/plat/irqs.h
delete mode 100644 arch/arm/plat-s5pc1xx/include/plat/pll.h
delete mode 100644 arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
delete mode 100644 arch/arm/plat-s5pc1xx/include/plat/regs-power.h
delete mode 100644 arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
delete mode 100644 arch/arm/plat-s5pc1xx/irq-eint.c
delete mode 100644 arch/arm/plat-s5pc1xx/irq.c
delete mode 100644 arch/arm/plat-s5pc1xx/s5pc100-clock.c
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
deleted file mode 100644
index ab58758..0000000
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ /dev/null
@@ -1,42 +0,0 @@
-# Copyright 2009 Samsung Electronics Co.
-# Byungho Min <bhmin@samsung.com>
-#
-# Licensed under GPLv2
-
-config PLAT_S5PC1XX
- bool
- depends on ARCH_S5PC1XX
- default y
- select PLAT_S3C
- select ARM_VIC
- select NO_IOPORT
- select ARCH_REQUIRE_GPIOLIB
- select SAMSUNG_CLKSRC
- select SAMSUNG_IRQ_UART
- select SAMSUNG_IRQ_VIC_TIMER
- select S3C_GPIO_TRACK
- select S3C_GPIO_PULL_UPDOWN
- select S5P_GPIO_DRVSTR
- select S3C_GPIO_CFG_S3C24XX
- select S3C_GPIO_CFG_S3C64XX
- select SAMSUNG_GPIOLIB_4BIT
- help
- Base platform code for any Samsung S5PC1XX device
-
-if PLAT_S5PC1XX
-
-# Configuration options shared by all S3C64XX implementations
-
-config CPU_S5PC100_INIT
- bool
- help
- Common initialisation code for the S5PC1XX
-
-config CPU_S5PC100_CLOCK
- bool
- help
- Common clock support code for the S5PC1XX
-
-# platform specific device setup
-
-endif
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
deleted file mode 100644
index d490543..0000000
--- a/arch/arm/plat-s5pc1xx/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-# arch/arm/plat-s5pc1xx/Makefile
-#
-# Copyright 2009 Samsung Electronics Co.
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n := dummy.o
-obj- :=
-
-# Core files
-
-obj-y += dev-uart.o
-obj-y += cpu.o
-obj-y += irq.o
-obj-y += clock.o
-
-# CPU support
-
-obj-$(CONFIG_CPU_S5PC100_INIT) += s5pc100-init.o
-obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o
-
-# Device setup
-
diff --git a/arch/arm/plat-s5pc1xx/clock.c b/arch/arm/plat-s5pc1xx/clock.c
deleted file mode 100644
index 387f231..0000000
--- a/arch/arm/plat-s5pc1xx/clock.c
+++ /dev/null
@@ -1,709 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/clock.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *
- * S5PC1XX Base clock support
- *
- * Based on plat-s3c64xx/clock.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/regs-clock.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-struct clk clk_27m = {
- .name = "clk_27m",
- .id = -1,
- .rate = 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
- unsigned long flags;
- u32 val;
-
- /* can't rely on clock lock, this register has other usages */
- local_irq_save(flags);
-
- val = __raw_readl(S5PC100_CLKSRC1);
- if (enable)
- val |= S5PC100_CLKSRC1_CLK48M_MASK;
- else
- val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
-
- __raw_writel(val, S5PC100_CLKSRC1);
- local_irq_restore(flags);
-
- return 0;
-}
-
-struct clk clk_48m = {
- .name = "clk_48m",
- .id = -1,
- .rate = 48000000,
- .enable = clk_48m_ctrl,
-};
-
-struct clk clk_54m = {
- .name = "clk_54m",
- .id = -1,
- .rate = 54000000,
-};
-
-struct clk clk_hd0 = {
- .name = "hclkd0",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
- .ops = &clk_ops_def_setrate,
-};
-
-struct clk clk_pd0 = {
- .name = "pclkd0",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
- .ops = &clk_ops_def_setrate,
-};
-
-static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable)
-{
- unsigned int ctrlbit = clk->ctrlbit;
- u32 con;
-
- con = __raw_readl(reg);
- if (enable)
- con |= ctrlbit;
- else
- con &= ~ctrlbit;
- __raw_writel(con, reg);
-
- return 0;
-}
-
-static int s5pc100_clk_d00_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
-}
-
-static int s5pc100_clk_d01_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
-}
-
-static int s5pc100_clk_d02_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
-}
-
-static int s5pc100_clk_d10_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
-}
-
-static int s5pc100_clk_d11_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
-}
-
-static int s5pc100_clk_d12_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
-}
-
-static int s5pc100_clk_d13_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
-}
-
-static int s5pc100_clk_d14_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
-}
-
-static int s5pc100_clk_d15_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
-}
-
-static int s5pc100_clk_d20_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
-}
-
-int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
-}
-
-int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
-}
-
-static struct clk s5pc100_init_clocks_disable[] = {
- {
- .name = "dsi",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_DSI,
- }, {
- .name = "csi",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_CSI,
- }, {
- .name = "ccan",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_CCAN0,
- }, {
- .name = "ccan",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_CCAN1,
- }, {
- .name = "keypad",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_KEYIF,
- }, {
- .name = "hclkd2",
- .id = -1,
- .parent = NULL,
- .enable = s5pc100_clk_d20_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D20_HCLKD2,
- }, {
- .name = "iis-d2",
- .id = -1,
- .parent = NULL,
- .enable = s5pc100_clk_d20_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D20_I2SD2,
- },
-};
-
-static struct clk s5pc100_init_clocks[] = {
- /* System1 (D0_0) devices */
- {
- .name = "intc",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_INTC,
- }, {
- .name = "tzic",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_TZIC,
- }, {
- .name = "cf-ata",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_CFCON,
- }, {
- .name = "mdma",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_MDMA,
- }, {
- .name = "g2d",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_G2D,
- }, {
- .name = "secss",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_SECSS,
- }, {
- .name = "cssys",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_CSSYS,
- },
-
- /* Memory (D0_1) devices */
- {
- .name = "dmc",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_DMC,
- }, {
- .name = "sromc",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_SROMC,
- }, {
- .name = "onenand",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_ONENAND,
- }, {
- .name = "nand",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_NFCON,
- }, {
- .name = "intmem",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_INTMEM,
- }, {
- .name = "ebi",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_EBI,
- },
-
- /* System2 (D0_2) devices */
- {
- .name = "seckey",
- .id = -1,
- .parent = &clk_pd0,
- .enable = s5pc100_clk_d02_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D02_SECKEY,
- }, {
- .name = "sdm",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d02_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D02_SDM,
- },
-
- /* File (D1_0) devices */
- {
- .name = "pdma",
- .id = 0,
- .parent = &clk_h,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_PDMA0,
- }, {
- .name = "pdma",
- .id = 1,
- .parent = &clk_h,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_PDMA1,
- }, {
- .name = "usb-host",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_USBHOST,
- }, {
- .name = "otg",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_USBOTG,
- }, {
- .name = "modem",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_MODEMIF,
- }, {
- .name = "hsmmc",
- .id = 0,
- .parent = &clk_48m,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_HSMMC0,
- }, {
- .name = "hsmmc",
- .id = 1,
- .parent = &clk_48m,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_HSMMC1,
- }, {
- .name = "hsmmc",
- .id = 2,
- .parent = &clk_48m,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_HSMMC2,
- },
-
- /* Multimedia1 (D1_1) devices */
- {
- .name = "lcd",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_LCD,
- }, {
- .name = "rotator",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_ROTATOR,
- }, {
- .name = "fimc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_FIMC0,
- }, {
- .name = "fimc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_FIMC1,
- }, {
- .name = "fimc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_FIMC2,
- }, {
- .name = "jpeg",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_JPEG,
- }, {
- .name = "g3d",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_G3D,
- },
-
- /* Multimedia2 (D1_2) devices */
- {
- .name = "tv",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_TV,
- }, {
- .name = "vp",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_VP,
- }, {
- .name = "mixer",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_MIXER,
- }, {
- .name = "hdmi",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_HDMI,
- }, {
- .name = "mfc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_MFC,
- },
-
- /* System (D1_3) devices */
- {
- .name = "chipid",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_CHIPID,
- }, {
- .name = "gpio",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_GPIO,
- }, {
- .name = "apc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_APC,
- }, {
- .name = "iec",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_IEC,
- }, {
- .name = "timers",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_PWM,
- }, {
- .name = "systimer",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_SYSTIMER,
- }, {
- .name = "watchdog",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_WDT,
- }, {
- .name = "rtc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_RTC,
- },
-
- /* Connectivity (D1_4) devices */
- {
- .name = "uart",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART0,
- }, {
- .name = "uart",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART1,
- }, {
- .name = "uart",
- .id = 2,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART2,
- }, {
- .name = "uart",
- .id = 3,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART3,
- }, {
- .name = "i2c",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_IIC,
- }, {
- .name = "hdmi-i2c",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_HDMI_IIC,
- }, {
- .name = "spi",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_SPI0,
- }, {
- .name = "spi",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_SPI1,
- }, {
- .name = "spi",
- .id = 2,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_SPI2,
- }, {
- .name = "irda",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_IRDA,
- }, {
- .name = "hsitx",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_HSITX,
- }, {
- .name = "hsirx",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_HSIRX,
- },
-
- /* Audio (D1_5) devices */
- {
- .name = "iis",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_IIS0,
- }, {
- .name = "iis",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_IIS1,
- }, {
- .name = "iis",
- .id = 2,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_IIS2,
- }, {
- .name = "ac97",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_AC97,
- }, {
- .name = "pcm",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_PCM0,
- }, {
- .name = "pcm",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_PCM1,
- }, {
- .name = "spdif",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_SPDIF,
- }, {
- .name = "adc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_TSADC,
- }, {
- .name = "cg",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_CG,
- },
-
- /* Audio (D2_0) devices: all disabled */
-
- /* Special Clocks 0 */
- {
- .name = "sclk_hpm",
- .id = -1,
- .parent = NULL,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_HPM,
- }, {
- .name = "sclk_onenand",
- .id = -1,
- .parent = NULL,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_ONENAND,
- }, {
- .name = "spi_48",
- .id = 0,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0_48,
- }, {
- .name = "spi_48",
- .id = 1,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1_48,
- }, {
- .name = "spi_48",
- .id = 2,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2_48,
- }, {
- .name = "mmc_48",
- .id = 0,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0_48,
- }, {
- .name = "mmc_48",
- .id = 1,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1_48,
- }, {
- .name = "mmc_48",
- .id = 2,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2_48,
- },
- /* Special Clocks 1 */
-};
-
-static struct clk *clks[] __initdata = {
- &clk_ext,
- &clk_epll,
- &clk_pd0,
- &clk_hd0,
- &clk_27m,
- &clk_48m,
- &clk_54m,
-};
-
-void __init s5pc1xx_register_clocks(void)
-{
- struct clk *clkp;
- int ret;
- int ptr;
- int size;
-
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- s3c_register_clocks(s5pc100_init_clocks,
- ARRAY_SIZE(s5pc100_init_clocks));
-
- clkp = s5pc100_init_clocks_disable;
- size = ARRAY_SIZE(s5pc100_init_clocks_disable);
-
- for (ptr = 0; ptr < size; ptr++, clkp++) {
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
-
- (clkp->enable)(clkp, 0);
- }
-
- s3c_pwmclk_init();
-}
diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c
deleted file mode 100644
index 02baeaa..0000000
--- a/arch/arm/plat-s5pc1xx/cpu.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/cpu.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX CPU Support
- *
- * Based on plat-s3c64xx/cpu.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <asm/mach/map.h>
-
-#include <plat/regs-serial.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-#include <plat/s5pc100.h>
-
-/* table of supported CPUs */
-
-static const char name_s5pc100[] = "S5PC100";
-
-static struct cpu_table cpu_ids[] __initdata = {
- {
- .idcode = 0x43100000,
- .idmask = 0xfffff000,
- .map_io = s5pc100_map_io,
- .init_clocks = s5pc100_init_clocks,
- .init_uarts = s5pc100_init_uarts,
- .init = s5pc100_init,
- .name = name_s5pc100,
- },
-};
-/* minimal IO mapping */
-
-/* see notes on uart map in arch/arm/mach-s5pc100/include/mach/debug-macro.S */
-#define UART_OFFS (S3C_PA_UART & 0xffff)
-
-static struct map_desc s5pc1xx_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5PC1XX_VA_CLK_OTHER,
- .pfn = __phys_to_pfn(S5PC1XX_PA_CLK_OTHER),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_GPIO,
- .pfn = __phys_to_pfn(S5PC100_PA_GPIO),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_CHIPID,
- .pfn = __phys_to_pfn(S5PC1XX_PA_CHIPID),
- .length = SZ_16,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_CLK,
- .pfn = __phys_to_pfn(S5PC1XX_PA_CLK),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_PWR,
- .pfn = __phys_to_pfn(S5PC1XX_PA_PWR),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)(S5PC1XX_VA_UART),
- .pfn = __phys_to_pfn(S5PC1XX_PA_UART),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_VIC(0),
- .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(0)),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_VIC(1),
- .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(1)),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_VIC(2),
- .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(2)),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_TIMER,
- .pfn = __phys_to_pfn(S5PC1XX_PA_TIMER),
- .length = SZ_256,
- .type = MT_DEVICE,
- },
-};
-
-/* read cpu identification code */
-
-void __init s5pc1xx_init_io(struct map_desc *mach_desc, int size)
-{
- unsigned long idcode;
-
- /* initialise the io descriptors we need for initialisation */
- iotable_init(s5pc1xx_iodesc, ARRAY_SIZE(s5pc1xx_iodesc));
- iotable_init(mach_desc, size);
-
- idcode = __raw_readl(S5PC1XX_VA_CHIPID);
- s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c
deleted file mode 100644
index 586c95c..0000000
--- a/arch/arm/plat-s5pc1xx/dev-uart.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/dev-uart.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Based on plat-s3c64xx/dev-uart.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-/* Serial port registrations */
-
-/* 64xx uarts are closer together */
-
-static struct resource s5pc1xx_uart0_resource[] = {
- [0] = {
- .start = S3C_PA_UART0,
- .end = S3C_PA_UART0 + 0x100,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX0,
- .end = IRQ_S3CUART_RX0,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S3CUART_TX0,
- .end = IRQ_S3CUART_TX0,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR0,
- .end = IRQ_S3CUART_ERR0,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource s5pc1xx_uart1_resource[] = {
- [0] = {
- .start = S3C_PA_UART1,
- .end = S3C_PA_UART1 + 0x100,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX1,
- .end = IRQ_S3CUART_RX1,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S3CUART_TX1,
- .end = IRQ_S3CUART_TX1,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR1,
- .end = IRQ_S3CUART_ERR1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource s5pc1xx_uart2_resource[] = {
- [0] = {
- .start = S3C_PA_UART2,
- .end = S3C_PA_UART2 + 0x100,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX2,
- .end = IRQ_S3CUART_RX2,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S3CUART_TX2,
- .end = IRQ_S3CUART_TX2,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR2,
- .end = IRQ_S3CUART_ERR2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource s5pc1xx_uart3_resource[] = {
- [0] = {
- .start = S3C_PA_UART3,
- .end = S3C_PA_UART3 + 0x100,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX3,
- .end = IRQ_S3CUART_RX3,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S3CUART_TX3,
- .end = IRQ_S3CUART_TX3,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR3,
- .end = IRQ_S3CUART_ERR3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-
-struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
- [0] = {
- .resources = s5pc1xx_uart0_resource,
- .nr_resources = ARRAY_SIZE(s5pc1xx_uart0_resource),
- },
- [1] = {
- .resources = s5pc1xx_uart1_resource,
- .nr_resources = ARRAY_SIZE(s5pc1xx_uart1_resource),
- },
- [2] = {
- .resources = s5pc1xx_uart2_resource,
- .nr_resources = ARRAY_SIZE(s5pc1xx_uart2_resource),
- },
- [3] = {
- .resources = s5pc1xx_uart3_resource,
- .nr_resources = ARRAY_SIZE(s5pc1xx_uart3_resource),
- },
-};
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
deleted file mode 100644
index 33ad267..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-eint.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *
- * External Interrupt (GPH0 ~ GPH3) control register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S5PC1XX_WKUP_INT_CON0_7 (S5PC1XX_EINT_BASE + 0x0)
-#define S5PC1XX_WKUP_INT_CON8_15 (S5PC1XX_EINT_BASE + 0x4)
-#define S5PC1XX_WKUP_INT_CON16_23 (S5PC1XX_EINT_BASE + 0x8)
-#define S5PC1XX_WKUP_INT_CON24_31 (S5PC1XX_EINT_BASE + 0xC)
-#define S5PC1XX_WKUP_INT_CON(x) (S5PC1XX_WKUP_INT_CON0_7 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_FLTCON0_3 (S5PC1XX_EINT_BASE + 0x80)
-#define S5PC1XX_WKUP_INT_FLTCON4_7 (S5PC1XX_EINT_BASE + 0x84)
-#define S5PC1XX_WKUP_INT_FLTCON8_11 (S5PC1XX_EINT_BASE + 0x88)
-#define S5PC1XX_WKUP_INT_FLTCON12_15 (S5PC1XX_EINT_BASE + 0x8C)
-#define S5PC1XX_WKUP_INT_FLTCON16_19 (S5PC1XX_EINT_BASE + 0x90)
-#define S5PC1XX_WKUP_INT_FLTCON20_23 (S5PC1XX_EINT_BASE + 0x94)
-#define S5PC1XX_WKUP_INT_FLTCON24_27 (S5PC1XX_EINT_BASE + 0x98)
-#define S5PC1XX_WKUP_INT_FLTCON28_31 (S5PC1XX_EINT_BASE + 0x9C)
-#define S5PC1XX_WKUP_INT_FLTCON(x) (S5PC1XX_WKUP_INT_FLTCON0_3 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_MASK0_7 (S5PC1XX_EINT_BASE + 0x100)
-#define S5PC1XX_WKUP_INT_MASK8_15 (S5PC1XX_EINT_BASE + 0x104)
-#define S5PC1XX_WKUP_INT_MASK16_23 (S5PC1XX_EINT_BASE + 0x108)
-#define S5PC1XX_WKUP_INT_MASK24_31 (S5PC1XX_EINT_BASE + 0x10C)
-#define S5PC1XX_WKUP_INT_MASK(x) (S5PC1XX_WKUP_INT_MASK0_7 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_PEND0_7 (S5PC1XX_EINT_BASE + 0x140)
-#define S5PC1XX_WKUP_INT_PEND8_15 (S5PC1XX_EINT_BASE + 0x144)
-#define S5PC1XX_WKUP_INT_PEND16_23 (S5PC1XX_EINT_BASE + 0x148)
-#define S5PC1XX_WKUP_INT_PEND24_31 (S5PC1XX_EINT_BASE + 0x14C)
-#define S5PC1XX_WKUP_INT_PEND(x) (S5PC1XX_WKUP_INT_PEND0_7 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_LOWLEV (0x00)
-#define S5PC1XX_WKUP_INT_HILEV (0x01)
-#define S5PC1XX_WKUP_INT_FALLEDGE (0x02)
-#define S5PC1XX_WKUP_INT_RISEEDGE (0x03)
-#define S5PC1XX_WKUP_INT_BOTHEDGE (0x04)
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
deleted file mode 100644
index 409c804..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/irqs.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX - Common IRQ support
- *
- * Based on plat-s3c64xx/include/plat/irqs.h
- */
-
-#ifndef __ASM_PLAT_S5PC1XX_IRQS_H
-#define __ASM_PLAT_S5PC1XX_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- *
- * note, since we're using the VICs, our start must be a
- * mulitple of 32 to allow the common code to work
- */
-
-#define S3C_IRQ_OFFSET (32)
-
-#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET)
-
-#define S3C_VIC0_BASE S3C_IRQ(0)
-#define S3C_VIC1_BASE S3C_IRQ(32)
-#define S3C_VIC2_BASE S3C_IRQ(64)
-
-/* UART interrupts, each UART has 4 intterupts per channel so
- * use the space between the ISA and S3C main interrupts. Note, these
- * are not in the same order as the S3C24XX series! */
-
-#define IRQ_S3CUART_BASE0 (16)
-#define IRQ_S3CUART_BASE1 (20)
-#define IRQ_S3CUART_BASE2 (24)
-#define IRQ_S3CUART_BASE3 (28)
-
-#define UART_IRQ_RXD (0)
-#define UART_IRQ_ERR (1)
-#define UART_IRQ_TXD (2)
-#define UART_IRQ_MODEM (3)
-
-#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
-
-/* VIC based IRQs */
-
-#define S5PC1XX_IRQ_VIC0(x) (S3C_VIC0_BASE + (x))
-#define S5PC1XX_IRQ_VIC1(x) (S3C_VIC1_BASE + (x))
-#define S5PC1XX_IRQ_VIC2(x) (S3C_VIC2_BASE + (x))
-
-/*
- * VIC0: system, DMA, timer
- */
-#define IRQ_EINT0 S5PC1XX_IRQ_VIC0(0)
-#define IRQ_EINT1 S5PC1XX_IRQ_VIC0(1)
-#define IRQ_EINT2 S5PC1XX_IRQ_VIC0(2)
-#define IRQ_EINT3 S5PC1XX_IRQ_VIC0(3)
-#define IRQ_EINT4 S5PC1XX_IRQ_VIC0(4)
-#define IRQ_EINT5 S5PC1XX_IRQ_VIC0(5)
-#define IRQ_EINT6 S5PC1XX_IRQ_VIC0(6)
-#define IRQ_EINT7 S5PC1XX_IRQ_VIC0(7)
-#define IRQ_EINT8 S5PC1XX_IRQ_VIC0(8)
-#define IRQ_EINT9 S5PC1XX_IRQ_VIC0(9)
-#define IRQ_EINT10 S5PC1XX_IRQ_VIC0(10)
-#define IRQ_EINT11 S5PC1XX_IRQ_VIC0(11)
-#define IRQ_EINT12 S5PC1XX_IRQ_VIC0(12)
-#define IRQ_EINT13 S5PC1XX_IRQ_VIC0(13)
-#define IRQ_EINT14 S5PC1XX_IRQ_VIC0(14)
-#define IRQ_EINT15 S5PC1XX_IRQ_VIC0(15)
-#define IRQ_EINT16_31 S5PC1XX_IRQ_VIC0(16)
-#define IRQ_BATF S5PC1XX_IRQ_VIC0(17)
-#define IRQ_MDMA S5PC1XX_IRQ_VIC0(18)
-#define IRQ_PDMA0 S5PC1XX_IRQ_VIC0(19)
-#define IRQ_PDMA1 S5PC1XX_IRQ_VIC0(20)
-#define IRQ_TIMER0_VIC S5PC1XX_IRQ_VIC0(21)
-#define IRQ_TIMER1_VIC S5PC1XX_IRQ_VIC0(22)
-#define IRQ_TIMER2_VIC S5PC1XX_IRQ_VIC0(23)
-#define IRQ_TIMER3_VIC S5PC1XX_IRQ_VIC0(24)
-#define IRQ_TIMER4_VIC S5PC1XX_IRQ_VIC0(25)
-#define IRQ_SYSTIMER S5PC1XX_IRQ_VIC0(26)
-#define IRQ_WDT S5PC1XX_IRQ_VIC0(27)
-#define IRQ_RTC_ALARM S5PC1XX_IRQ_VIC0(28)
-#define IRQ_RTC_TIC S5PC1XX_IRQ_VIC0(29)
-#define IRQ_GPIOINT S5PC1XX_IRQ_VIC0(30)
-
-/*
- * VIC1: ARM, power, memory, connectivity
- */
-#define IRQ_CORTEX0 S5PC1XX_IRQ_VIC1(0)
-#define IRQ_CORTEX1 S5PC1XX_IRQ_VIC1(1)
-#define IRQ_CORTEX2 S5PC1XX_IRQ_VIC1(2)
-#define IRQ_CORTEX3 S5PC1XX_IRQ_VIC1(3)
-#define IRQ_CORTEX4 S5PC1XX_IRQ_VIC1(4)
-#define IRQ_IEMAPC S5PC1XX_IRQ_VIC1(5)
-#define IRQ_IEMIEC S5PC1XX_IRQ_VIC1(6)
-#define IRQ_ONENAND S5PC1XX_IRQ_VIC1(7)
-#define IRQ_NFC S5PC1XX_IRQ_VIC1(8)
-#define IRQ_CFC S5PC1XX_IRQ_VIC1(9)
-#define IRQ_UART0 S5PC1XX_IRQ_VIC1(10)
-#define IRQ_UART1 S5PC1XX_IRQ_VIC1(11)
-#define IRQ_UART2 S5PC1XX_IRQ_VIC1(12)
-#define IRQ_UART3 S5PC1XX_IRQ_VIC1(13)
-#define IRQ_IIC S5PC1XX_IRQ_VIC1(14)
-#define IRQ_SPI0 S5PC1XX_IRQ_VIC1(15)
-#define IRQ_SPI1 S5PC1XX_IRQ_VIC1(16)
-#define IRQ_SPI2 S5PC1XX_IRQ_VIC1(17)
-#define IRQ_IRDA S5PC1XX_IRQ_VIC1(18)
-#define IRQ_CAN0 S5PC1XX_IRQ_VIC1(19)
-#define IRQ_CAN1 S5PC1XX_IRQ_VIC1(20)
-#define IRQ_HSIRX S5PC1XX_IRQ_VIC1(21)
-#define IRQ_HSITX S5PC1XX_IRQ_VIC1(22)
-#define IRQ_UHOST S5PC1XX_IRQ_VIC1(23)
-#define IRQ_OTG S5PC1XX_IRQ_VIC1(24)
-#define IRQ_MSM S5PC1XX_IRQ_VIC1(25)
-#define IRQ_HSMMC0 S5PC1XX_IRQ_VIC1(26)
-#define IRQ_HSMMC1 S5PC1XX_IRQ_VIC1(27)
-#define IRQ_HSMMC2 S5PC1XX_IRQ_VIC1(28)
-#define IRQ_MIPICSI S5PC1XX_IRQ_VIC1(29)
-#define IRQ_MIPIDSI S5PC1XX_IRQ_VIC1(30)
-
-/*
- * VIC2: multimedia, audio, security
- */
-#define IRQ_LCD0 S5PC1XX_IRQ_VIC2(0)
-#define IRQ_LCD1 S5PC1XX_IRQ_VIC2(1)
-#define IRQ_LCD2 S5PC1XX_IRQ_VIC2(2)
-#define IRQ_LCD3 S5PC1XX_IRQ_VIC2(3)
-#define IRQ_ROTATOR S5PC1XX_IRQ_VIC2(4)
-#define IRQ_FIMC0 S5PC1XX_IRQ_VIC2(5)
-#define IRQ_FIMC1 S5PC1XX_IRQ_VIC2(6)
-#define IRQ_FIMC2 S5PC1XX_IRQ_VIC2(7)
-#define IRQ_JPEG S5PC1XX_IRQ_VIC2(8)
-#define IRQ_2D S5PC1XX_IRQ_VIC2(9)
-#define IRQ_3D S5PC1XX_IRQ_VIC2(10)
-#define IRQ_MIXER S5PC1XX_IRQ_VIC2(11)
-#define IRQ_HDMI S5PC1XX_IRQ_VIC2(12)
-#define IRQ_IIC1 S5PC1XX_IRQ_VIC2(13)
-#define IRQ_MFC S5PC1XX_IRQ_VIC2(14)
-#define IRQ_TVENC S5PC1XX_IRQ_VIC2(15)
-#define IRQ_I2S0 S5PC1XX_IRQ_VIC2(16)
-#define IRQ_I2S1 S5PC1XX_IRQ_VIC2(17)
-#define IRQ_I2S2 S5PC1XX_IRQ_VIC2(18)
-#define IRQ_AC97 S5PC1XX_IRQ_VIC2(19)
-#define IRQ_PCM0 S5PC1XX_IRQ_VIC2(20)
-#define IRQ_PCM1 S5PC1XX_IRQ_VIC2(21)
-#define IRQ_SPDIF S5PC1XX_IRQ_VIC2(22)
-#define IRQ_ADC S5PC1XX_IRQ_VIC2(23)
-#define IRQ_PENDN S5PC1XX_IRQ_VIC2(24)
-#define IRQ_TC IRQ_PENDN
-#define IRQ_KEYPAD S5PC1XX_IRQ_VIC2(25)
-#define IRQ_CG S5PC1XX_IRQ_VIC2(26)
-#define IRQ_SEC S5PC1XX_IRQ_VIC2(27)
-#define IRQ_SECRX S5PC1XX_IRQ_VIC2(28)
-#define IRQ_SECTX S5PC1XX_IRQ_VIC2(29)
-#define IRQ_SDMIRQ S5PC1XX_IRQ_VIC2(30)
-#define IRQ_SDMFIQ S5PC1XX_IRQ_VIC2(31)
-
-#define IRQ_TIMER(x) (IRQ_SDMFIQ + 1 + (x))
-#define IRQ_TIMER0 IRQ_TIMER(0)
-#define IRQ_TIMER1 IRQ_TIMER(1)
-#define IRQ_TIMER2 IRQ_TIMER(2)
-#define IRQ_TIMER3 IRQ_TIMER(3)
-#define IRQ_TIMER4 IRQ_TIMER(4)
-
-/* External interrupt */
-#define S3C_IRQ_EINT_BASE (IRQ_SDMFIQ + 6)
-
-#define S3C_EINT(x) (S3C_IRQ_EINT_BASE + (x - 16))
-#define IRQ_EINT(x) (x < 16 ? IRQ_EINT0 + x : S3C_EINT(x))
-#define IRQ_EINT_BIT(x) (x < IRQ_EINT16_31 ? x - IRQ_EINT0 : x - S3C_EINT(0))
-
-/* GPIO interrupt */
-#define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1)
-#define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x))
-
-/*
- * Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs
- */
-#define NR_IRQS (S3C_IRQ_GPIO(320) + 1)
-
-#endif /* __ASM_PLAT_S5PC1XX_IRQS_H */
-
diff --git a/arch/arm/plat-s5pc1xx/include/plat/pll.h b/arch/arm/plat-s5pc1xx/include/plat/pll.h
deleted file mode 100644
index 21afef1..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/pll.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/pll.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX PLL code
- *
- * Based on plat-s3c64xx/include/plat/pll.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S5P_PLL_MDIV_MASK ((1 << (25-16+1)) - 1)
-#define S5P_PLL_PDIV_MASK ((1 << (13-8+1)) - 1)
-#define S5P_PLL_SDIV_MASK ((1 << (2-0+1)) - 1)
-#define S5P_PLL_MDIV_SHIFT (16)
-#define S5P_PLL_PDIV_SHIFT (8)
-#define S5P_PLL_SDIV_SHIFT (0)
-
-#include <asm/div64.h>
-
-static inline unsigned long s5pc1xx_get_pll(unsigned long baseclk,
- u32 pllcon)
-{
- u32 mdiv, pdiv, sdiv;
- u64 fvco = baseclk;
-
- mdiv = (pllcon >> S5P_PLL_MDIV_SHIFT) & S5P_PLL_MDIV_MASK;
- pdiv = (pllcon >> S5P_PLL_PDIV_SHIFT) & S5P_PLL_PDIV_MASK;
- sdiv = (pllcon >> S5P_PLL_SDIV_SHIFT) & S5P_PLL_SDIV_MASK;
-
- fvco *= mdiv;
- do_div(fvco, (pdiv << sdiv));
-
- return (unsigned long)fvco;
-}
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
deleted file mode 100644
index 24dec4e..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_CLOCK_H
-#define __PLAT_REGS_CLOCK_H __FILE__
-
-#define S5PC100_CLKREG(x) (S5PC1XX_VA_CLK + (x))
-#define S5PC100_CLKREG_OTHER(x) (S5PC1XX_VA_CLK_OTHER + (x))
-
-/* s5pc100 register for clock */
-#define S5PC100_APLL_LOCK S5PC100_CLKREG(0x00)
-#define S5PC100_MPLL_LOCK S5PC100_CLKREG(0x04)
-#define S5PC100_EPLL_LOCK S5PC100_CLKREG(0x08)
-#define S5PC100_HPLL_LOCK S5PC100_CLKREG(0x0C)
-
-#define S5PC100_APLL_CON S5PC100_CLKREG(0x100)
-#define S5PC100_MPLL_CON S5PC100_CLKREG(0x104)
-#define S5PC100_EPLL_CON S5PC100_CLKREG(0x108)
-#define S5PC100_HPLL_CON S5PC100_CLKREG(0x10C)
-
-#define S5PC100_CLKSRC0 S5PC100_CLKREG(0x200)
-#define S5PC100_CLKSRC1 S5PC100_CLKREG(0x204)
-#define S5PC100_CLKSRC2 S5PC100_CLKREG(0x208)
-#define S5PC100_CLKSRC3 S5PC100_CLKREG(0x20C)
-
-#define S5PC100_CLKDIV0 S5PC100_CLKREG(0x300)
-#define S5PC100_CLKDIV1 S5PC100_CLKREG(0x304)
-#define S5PC100_CLKDIV2 S5PC100_CLKREG(0x308)
-#define S5PC100_CLKDIV3 S5PC100_CLKREG(0x30C)
-#define S5PC100_CLKDIV4 S5PC100_CLKREG(0x310)
-
-#define S5PC100_CLK_OUT S5PC100_CLKREG(0x400)
-
-#define S5PC100_CLKGATE_D00 S5PC100_CLKREG(0x500)
-#define S5PC100_CLKGATE_D01 S5PC100_CLKREG(0x504)
-#define S5PC100_CLKGATE_D02 S5PC100_CLKREG(0x508)
-
-#define S5PC100_CLKGATE_D10 S5PC100_CLKREG(0x520)
-#define S5PC100_CLKGATE_D11 S5PC100_CLKREG(0x524)
-#define S5PC100_CLKGATE_D12 S5PC100_CLKREG(0x528)
-#define S5PC100_CLKGATE_D13 S5PC100_CLKREG(0x52C)
-#define S5PC100_CLKGATE_D14 S5PC100_CLKREG(0x530)
-#define S5PC100_CLKGATE_D15 S5PC100_CLKREG(0x534)
-
-#define S5PC100_CLKGATE_D20 S5PC100_CLKREG(0x540)
-
-#define S5PC100_SCLKGATE0 S5PC100_CLKREG(0x560)
-#define S5PC100_SCLKGATE1 S5PC100_CLKREG(0x564)
-
-/* EPLL_CON */
-#define S5PC100_EPLL_EN (1<<31)
-#define S5PC100_EPLL_MASK 0xffffffff
-#define S5PC100_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s)))
-
-/* CLKSRC0..CLKSRC3 -> mostly removed due to clksrc updates */
-#define S5PC100_CLKSRC1_CLK48M_MASK (0x1<<24)
-#define S5PC100_CLKSRC1_CLK48M_SHIFT (24)
-
-/* CLKDIV0 */
-#define S5PC100_CLKDIV0_APLL_MASK (0x1<<0)
-#define S5PC100_CLKDIV0_APLL_SHIFT (0)
-#define S5PC100_CLKDIV0_ARM_MASK (0x7<<4)
-#define S5PC100_CLKDIV0_ARM_SHIFT (4)
-#define S5PC100_CLKDIV0_D0_MASK (0x7<<8)
-#define S5PC100_CLKDIV0_D0_SHIFT (8)
-#define S5PC100_CLKDIV0_PCLKD0_MASK (0x7<<12)
-#define S5PC100_CLKDIV0_PCLKD0_SHIFT (12)
-#define S5PC100_CLKDIV0_SECSS_MASK (0x7<<16)
-#define S5PC100_CLKDIV0_SECSS_SHIFT (16)
-
-/* CLKDIV1 (OneNAND clock only used in one place, removed) */
-#define S5PC100_CLKDIV1_APLL2_MASK (0x7<<0)
-#define S5PC100_CLKDIV1_APLL2_SHIFT (0)
-#define S5PC100_CLKDIV1_MPLL_MASK (0x3<<4)
-#define S5PC100_CLKDIV1_MPLL_SHIFT (4)
-#define S5PC100_CLKDIV1_MPLL2_MASK (0x1<<8)
-#define S5PC100_CLKDIV1_MPLL2_SHIFT (8)
-#define S5PC100_CLKDIV1_D1_MASK (0x7<<12)
-#define S5PC100_CLKDIV1_D1_SHIFT (12)
-#define S5PC100_CLKDIV1_PCLKD1_MASK (0x7<<16)
-#define S5PC100_CLKDIV1_PCLKD1_SHIFT (16)
-#define S5PC100_CLKDIV1_CAM_MASK (0x1F<<24)
-#define S5PC100_CLKDIV1_CAM_SHIFT (24)
-
-/* CLKDIV2 => removed in clksrc update */
-/* CLKDIV3 => removed in clksrc update, or not needed */
-/* CLKDIV4 => removed in clksrc update, or not needed */
-
-/* HCLKD0/PCLKD0 Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_D00_INTC (1<<0)
-#define S5PC100_CLKGATE_D00_TZIC (1<<1)
-#define S5PC100_CLKGATE_D00_CFCON (1<<2)
-#define S5PC100_CLKGATE_D00_MDMA (1<<3)
-#define S5PC100_CLKGATE_D00_G2D (1<<4)
-#define S5PC100_CLKGATE_D00_SECSS (1<<5)
-#define S5PC100_CLKGATE_D00_CSSYS (1<<6)
-
-/* HCLKD0/PCLKD0 Clock Gate 1 Registers */
-#define S5PC100_CLKGATE_D01_DMC (1<<0)
-#define S5PC100_CLKGATE_D01_SROMC (1<<1)
-#define S5PC100_CLKGATE_D01_ONENAND (1<<2)
-#define S5PC100_CLKGATE_D01_NFCON (1<<3)
-#define S5PC100_CLKGATE_D01_INTMEM (1<<4)
-#define S5PC100_CLKGATE_D01_EBI (1<<5)
-
-/* PCLKD0 Clock Gate 2 Registers */
-#define S5PC100_CLKGATE_D02_SECKEY (1<<1)
-#define S5PC100_CLKGATE_D02_SDM (1<<2)
-
-/* HCLKD1/PCLKD1 Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_D10_PDMA0 (1<<0)
-#define S5PC100_CLKGATE_D10_PDMA1 (1<<1)
-#define S5PC100_CLKGATE_D10_USBHOST (1<<2)
-#define S5PC100_CLKGATE_D10_USBOTG (1<<3)
-#define S5PC100_CLKGATE_D10_MODEMIF (1<<4)
-#define S5PC100_CLKGATE_D10_HSMMC0 (1<<5)
-#define S5PC100_CLKGATE_D10_HSMMC1 (1<<6)
-#define S5PC100_CLKGATE_D10_HSMMC2 (1<<7)
-
-/* HCLKD1/PCLKD1 Clock Gate 1 Registers */
-#define S5PC100_CLKGATE_D11_LCD (1<<0)
-#define S5PC100_CLKGATE_D11_ROTATOR (1<<1)
-#define S5PC100_CLKGATE_D11_FIMC0 (1<<2)
-#define S5PC100_CLKGATE_D11_FIMC1 (1<<3)
-#define S5PC100_CLKGATE_D11_FIMC2 (1<<4)
-#define S5PC100_CLKGATE_D11_JPEG (1<<5)
-#define S5PC100_CLKGATE_D11_DSI (1<<6)
-#define S5PC100_CLKGATE_D11_CSI (1<<7)
-#define S5PC100_CLKGATE_D11_G3D (1<<8)
-
-/* HCLKD1/PCLKD1 Clock Gate 2 Registers */
-#define S5PC100_CLKGATE_D12_TV (1<<0)
-#define S5PC100_CLKGATE_D12_VP (1<<1)
-#define S5PC100_CLKGATE_D12_MIXER (1<<2)
-#define S5PC100_CLKGATE_D12_HDMI (1<<3)
-#define S5PC100_CLKGATE_D12_MFC (1<<4)
-
-/* HCLKD1/PCLKD1 Clock Gate 3 Registers */
-#define S5PC100_CLKGATE_D13_CHIPID (1<<0)
-#define S5PC100_CLKGATE_D13_GPIO (1<<1)
-#define S5PC100_CLKGATE_D13_APC (1<<2)
-#define S5PC100_CLKGATE_D13_IEC (1<<3)
-#define S5PC100_CLKGATE_D13_PWM (1<<6)
-#define S5PC100_CLKGATE_D13_SYSTIMER (1<<7)
-#define S5PC100_CLKGATE_D13_WDT (1<<8)
-#define S5PC100_CLKGATE_D13_RTC (1<<9)
-
-/* HCLKD1/PCLKD1 Clock Gate 4 Registers */
-#define S5PC100_CLKGATE_D14_UART0 (1<<0)
-#define S5PC100_CLKGATE_D14_UART1 (1<<1)
-#define S5PC100_CLKGATE_D14_UART2 (1<<2)
-#define S5PC100_CLKGATE_D14_UART3 (1<<3)
-#define S5PC100_CLKGATE_D14_IIC (1<<4)
-#define S5PC100_CLKGATE_D14_HDMI_IIC (1<<5)
-#define S5PC100_CLKGATE_D14_SPI0 (1<<6)
-#define S5PC100_CLKGATE_D14_SPI1 (1<<7)
-#define S5PC100_CLKGATE_D14_SPI2 (1<<8)
-#define S5PC100_CLKGATE_D14_IRDA (1<<9)
-#define S5PC100_CLKGATE_D14_CCAN0 (1<<10)
-#define S5PC100_CLKGATE_D14_CCAN1 (1<<11)
-#define S5PC100_CLKGATE_D14_HSITX (1<<12)
-#define S5PC100_CLKGATE_D14_HSIRX (1<<13)
-
-/* HCLKD1/PCLKD1 Clock Gate 5 Registers */
-#define S5PC100_CLKGATE_D15_IIS0 (1<<0)
-#define S5PC100_CLKGATE_D15_IIS1 (1<<1)
-#define S5PC100_CLKGATE_D15_IIS2 (1<<2)
-#define S5PC100_CLKGATE_D15_AC97 (1<<3)
-#define S5PC100_CLKGATE_D15_PCM0 (1<<4)
-#define S5PC100_CLKGATE_D15_PCM1 (1<<5)
-#define S5PC100_CLKGATE_D15_SPDIF (1<<6)
-#define S5PC100_CLKGATE_D15_TSADC (1<<7)
-#define S5PC100_CLKGATE_D15_KEYIF (1<<8)
-#define S5PC100_CLKGATE_D15_CG (1<<9)
-
-/* HCLKD2 Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_D20_HCLKD2 (1<<0)
-#define S5PC100_CLKGATE_D20_I2SD2 (1<<1)
-
-/* Special Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_SCLK0_HPM (1<<0)
-#define S5PC100_CLKGATE_SCLK0_PWI (1<<1)
-#define S5PC100_CLKGATE_SCLK0_ONENAND (1<<2)
-#define S5PC100_CLKGATE_SCLK0_UART (1<<3)
-#define S5PC100_CLKGATE_SCLK0_SPI0 (1<<4)
-#define S5PC100_CLKGATE_SCLK0_SPI1 (1<<5)
-#define S5PC100_CLKGATE_SCLK0_SPI2 (1<<6)
-#define S5PC100_CLKGATE_SCLK0_SPI0_48 (1<<7)
-#define S5PC100_CLKGATE_SCLK0_SPI1_48 (1<<8)
-#define S5PC100_CLKGATE_SCLK0_SPI2_48 (1<<9)
-#define S5PC100_CLKGATE_SCLK0_IRDA (1<<10)
-#define S5PC100_CLKGATE_SCLK0_USBHOST (1<<11)
-#define S5PC100_CLKGATE_SCLK0_MMC0 (1<<12)
-#define S5PC100_CLKGATE_SCLK0_MMC1 (1<<13)
-#define S5PC100_CLKGATE_SCLK0_MMC2 (1<<14)
-#define S5PC100_CLKGATE_SCLK0_MMC0_48 (1<<15)
-#define S5PC100_CLKGATE_SCLK0_MMC1_48 (1<<16)
-#define S5PC100_CLKGATE_SCLK0_MMC2_48 (1<<17)
-
-/* Special Clock Gate 1 Registers */
-#define S5PC100_CLKGATE_SCLK1_LCD (1<<0)
-#define S5PC100_CLKGATE_SCLK1_FIMC0 (1<<1)
-#define S5PC100_CLKGATE_SCLK1_FIMC1 (1<<2)
-#define S5PC100_CLKGATE_SCLK1_FIMC2 (1<<3)
-#define S5PC100_CLKGATE_SCLK1_TV54 (1<<4)
-#define S5PC100_CLKGATE_SCLK1_VDAC54 (1<<5)
-#define S5PC100_CLKGATE_SCLK1_MIXER (1<<6)
-#define S5PC100_CLKGATE_SCLK1_HDMI (1<<7)
-#define S5PC100_CLKGATE_SCLK1_AUDIO0 (1<<8)
-#define S5PC100_CLKGATE_SCLK1_AUDIO1 (1<<9)
-#define S5PC100_CLKGATE_SCLK1_AUDIO2 (1<<10)
-#define S5PC100_CLKGATE_SCLK1_SPDIF (1<<11)
-#define S5PC100_CLKGATE_SCLK1_CAM (1<<12)
-
-#define S5PC100_SWRESET S5PC100_CLKREG_OTHER(0x000)
-#define S5PC100_OND_SWRESET S5PC100_CLKREG_OTHER(0x008)
-#define S5PC100_GEN_CTRL S5PC100_CLKREG_OTHER(0x100)
-#define S5PC100_GEN_STATUS S5PC100_CLKREG_OTHER(0x104)
-#define S5PC100_MEM_SYS_CFG S5PC100_CLKREG_OTHER(0x200)
-#define S5PC100_CAM_MUX_SEL S5PC100_CLKREG_OTHER(0x300)
-#define S5PC100_MIXER_OUT_SEL S5PC100_CLKREG_OTHER(0x304)
-#define S5PC100_LPMP_MODE_SEL S5PC100_CLKREG_OTHER(0x308)
-#define S5PC100_MIPI_PHY_CON0 S5PC100_CLKREG_OTHER(0x400)
-#define S5PC100_MIPI_PHY_CON1 S5PC100_CLKREG_OTHER(0x414)
-#define S5PC100_HDMI_PHY_CON0 S5PC100_CLKREG_OTHER(0x420)
-
-#define S5PC100_SWRESET_RESETVAL 0xc100
-#define S5PC100_OTHER_SYS_INT 24
-#define S5PC100_OTHER_STA_TYPE 23
-#define STA_TYPE_EXPON 0
-#define STA_TYPE_SFR 1
-
-#define S5PC100_SLEEP_CFG_OSC_EN 0
-
-/* OTHERS Resgister */
-#define S5PC100_OTHERS_USB_SIG_MASK (1 << 16)
-#define S5PC100_OTHERS_MIPI_DPHY_EN (1 << 28)
-
-/* MIPI D-PHY Control Register 0 */
-#define S5PC100_MIPI_PHY_CON0_M_RESETN (1 << 1)
-#define S5PC100_MIPI_PHY_CON0_S_RESETN (1 << 0)
-
-#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-power.h b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
deleted file mode 100644
index 02ffa49..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Jongse Won <jongse.won@samsung.com>
- *
- * S5PC1XX clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_REGS_PWR
-#define __ASM_ARM_REGS_PWR __FILE__
-
-#define S5PC1XX_PWRREG(x) (S5PC1XX_VA_PWR + (x))
-
-/* s5pc100 (0xE0108000) register for power management */
-#define S5PC100_PWR_CFG S5PC1XX_PWRREG(0x0)
-#define S5PC100_EINT_WAKEUP_MASK S5PC1XX_PWRREG(0x4)
-#define S5PC100_NORMAL_CFG S5PC1XX_PWRREG(0x10)
-#define S5PC100_STOP_CFG S5PC1XX_PWRREG(0x14)
-#define S5PC100_SLEEP_CFG S5PC1XX_PWRREG(0x18)
-#define S5PC100_STOP_MEM_CFG S5PC1XX_PWRREG(0x1C)
-#define S5PC100_OSC_FREQ S5PC1XX_PWRREG(0x100)
-#define S5PC100_OSC_STABLE S5PC1XX_PWRREG(0x104)
-#define S5PC100_PWR_STABLE S5PC1XX_PWRREG(0x108)
-#define S5PC100_MTC_STABLE S5PC1XX_PWRREG(0x110)
-#define S5PC100_CLAMP_STABLE S5PC1XX_PWRREG(0x114)
-#define S5PC100_OTHERS S5PC1XX_PWRREG(0x200)
-#define S5PC100_RST_STAT S5PC1XX_PWRREG(0x300)
-#define S5PC100_WAKEUP_STAT S5PC1XX_PWRREG(0x304)
-#define S5PC100_BLK_PWR_STAT S5PC1XX_PWRREG(0x308)
-#define S5PC100_INFORM0 S5PC1XX_PWRREG(0x400)
-#define S5PC100_INFORM1 S5PC1XX_PWRREG(0x404)
-#define S5PC100_INFORM2 S5PC1XX_PWRREG(0x408)
-#define S5PC100_INFORM3 S5PC1XX_PWRREG(0x40C)
-#define S5PC100_INFORM4 S5PC1XX_PWRREG(0x410)
-#define S5PC100_INFORM5 S5PC1XX_PWRREG(0x414)
-#define S5PC100_INFORM6 S5PC1XX_PWRREG(0x418)
-#define S5PC100_INFORM7 S5PC1XX_PWRREG(0x41C)
-#define S5PC100_DCGIDX_MAP0 S5PC1XX_PWRREG(0x500)
-#define S5PC100_DCGIDX_MAP1 S5PC1XX_PWRREG(0x504)
-#define S5PC100_DCGIDX_MAP2 S5PC1XX_PWRREG(0x508)
-#define S5PC100_DCGPERF_MAP0 S5PC1XX_PWRREG(0x50C)
-#define S5PC100_DCGPERF_MAP1 S5PC1XX_PWRREG(0x510)
-#define S5PC100_DVCIDX_MAP S5PC1XX_PWRREG(0x514)
-#define S5PC100_FREQ_CPU S5PC1XX_PWRREG(0x518)
-#define S5PC100_FREQ_DPM S5PC1XX_PWRREG(0x51C)
-#define S5PC100_DVSEMCLK_EN S5PC1XX_PWRREG(0x520)
-#define S5PC100_APLL_CON_L8 S5PC1XX_PWRREG(0x600)
-#define S5PC100_APLL_CON_L7 S5PC1XX_PWRREG(0x604)
-#define S5PC100_APLL_CON_L6 S5PC1XX_PWRREG(0x608)
-#define S5PC100_APLL_CON_L5 S5PC1XX_PWRREG(0x60C)
-#define S5PC100_APLL_CON_L4 S5PC1XX_PWRREG(0x610)
-#define S5PC100_APLL_CON_L3 S5PC1XX_PWRREG(0x614)
-#define S5PC100_APLL_CON_L2 S5PC1XX_PWRREG(0x618)
-#define S5PC100_APLL_CON_L1 S5PC1XX_PWRREG(0x61C)
-#define S5PC100_IEM_CONTROL S5PC1XX_PWRREG(0x620)
-#define S5PC100_CLKDIV_IEM_L8 S5PC1XX_PWRREG(0x700)
-#define S5PC100_CLKDIV_IEM_L7 S5PC1XX_PWRREG(0x704)
-#define S5PC100_CLKDIV_IEM_L6 S5PC1XX_PWRREG(0x708)
-#define S5PC100_CLKDIV_IEM_L5 S5PC1XX_PWRREG(0x70C)
-#define S5PC100_CLKDIV_IEM_L4 S5PC1XX_PWRREG(0x710)
-#define S5PC100_CLKDIV_IEM_L3 S5PC1XX_PWRREG(0x714)
-#define S5PC100_CLKDIV_IEM_L2 S5PC1XX_PWRREG(0x718)
-#define S5PC100_CLKDIV_IEM_L1 S5PC1XX_PWRREG(0x71C)
-#define S5PC100_IEM_HPMCLK_DIV S5PC1XX_PWRREG(0x724)
-
-/* PWR_CFG */
-#define S5PC100_PWRCFG_CFG_DEEP_IDLE (1 << 31)
-#define S5PC100_PWRCFG_CFG_WFI_MASK (3 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_IDLE (0 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE (1 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_STOP (2 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_SLEEP (3 << 5)
-
-/* SLEEP_CFG */
-#define S5PC100_SLEEP_OSC_EN_SLEEP (1 << 0)
-
-/* OTHERS */
-#define S5PC100_PMU_INT_DISABLE (1 << 24)
-
-#endif /* __ASM_ARM_REGS_PWR */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
deleted file mode 100644
index 2531f34..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Header file for s5pc100 cpu support
- *
- * Based on plat-s3c64xx/include/plat/s3c6400.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5PC100 related SoCs */
-extern int s5pc100_init(void);
-extern void s5pc100_map_io(void);
-extern void s5pc100_init_clocks(int xtal);
-extern int s5pc100_register_baseclocks(unsigned long xtal);
-extern void s5pc100_init_irq(void);
-extern void s5pc100_init_io(struct map_desc *mach_desc, int size);
-extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s5pc100_register_clocks(void);
-extern void s5pc100_setup_clocks(void);
-extern struct sysdev_class s5pc100_sysclass;
-
-#define s5pc100_init_uarts s5pc100_common_init_uarts
-
-/* Some day, belows will be moved to plat-s5pc/include/plat/cpu.h */
-extern void s5pc1xx_init_irq(u32 *vic_valid, int num);
-extern void s5pc1xx_init_io(struct map_desc *mach_desc, int size);
-
-/* Some day, belows will be moved to plat-s5pc/include/plat/clock.h */
-extern struct clk clk_hpll;
-extern struct clk clk_hd0;
-extern struct clk clk_pd0;
-extern struct clk clk_54m;
-extern void s5pc1xx_register_clocks(void);
-extern int s5pc100_sclk0_ctrl(struct clk *clk, int enable);
-extern int s5pc100_sclk1_ctrl(struct clk *clk, int enable);
-
-/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
-extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
-extern struct platform_device s3c_device_g2d;
-extern struct platform_device s3c_device_g3d;
-extern struct platform_device s3c_device_vpp;
-extern struct platform_device s3c_device_tvenc;
-extern struct platform_device s3c_device_tvscaler;
-extern struct platform_device s3c_device_rotator;
-extern struct platform_device s3c_device_jpeg;
-extern struct platform_device s3c_device_onenand;
-extern struct platform_device s3c_device_usb_otghcd;
-extern struct platform_device s3c_device_keypad;
-extern struct platform_device s3c_device_ts;
-extern struct platform_device s3c_device_g3d;
-extern struct platform_device s3c_device_smc911x;
-extern struct platform_device s3c_device_fimc0;
-extern struct platform_device s3c_device_fimc1;
-extern struct platform_device s3c_device_mfc;
-extern struct platform_device s3c_device_ac97;
-extern struct platform_device s3c_device_fimc0;
-extern struct platform_device s3c_device_fimc1;
-extern struct platform_device s3c_device_fimc2;
-
diff --git a/arch/arm/plat-s5pc1xx/irq-eint.c b/arch/arm/plat-s5pc1xx/irq-eint.c
deleted file mode 100644
index 373122f..0000000
--- a/arch/arm/plat-s5pc1xx/irq-eint.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * linux/arch/arm/plat-s5pc1xx/irq-eint.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- * Kyungin Park <kyungmin.park@samsung.com>
- *
- * Based on plat-s3c64xx/irq-eint.c
- *
- * S5PC1XX - Interrupt handling for IRQ_EINT(x)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/pm.h>
-#include <linux/gpio.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-ext.h>
-#include <plat/pm.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-irqtype.h>
-
-/*
- * bank is a group of external interrupt
- * bank0 means EINT0 ... EINT7
- * bank1 means EINT8 ... EINT15
- * bank2 means EINT16 ... EINT23
- * bank3 means EINT24 ... EINT31
- */
-
-static inline int s3c_get_eint(unsigned int irq)
-{
- int real;
-
- if (irq < IRQ_EINT16_31)
- real = (irq - IRQ_EINT0);
- else
- real = (irq - S3C_IRQ_EINT_BASE) + IRQ_EINT16_31 - IRQ_EINT0;
-
- return real;
-}
-
-static inline int s3c_get_bank(unsigned int irq)
-{
- return s3c_get_eint(irq) >> 3;
-}
-
-static inline int s3c_eint_to_bit(unsigned int irq)
-{
- int real, bit;
-
- real = s3c_get_eint(irq);
- bit = 1 << (real & (8 - 1));
-
- return bit;
-}
-
-static inline void s3c_irq_eint_mask(unsigned int irq)
-{
- u32 mask;
- u32 bank = s3c_get_bank(irq);
-
- mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
- mask |= s3c_eint_to_bit(irq);
- __raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
-}
-
-static void s3c_irq_eint_unmask(unsigned int irq)
-{
- u32 mask;
- u32 bank = s3c_get_bank(irq);
-
- mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
- mask &= ~(s3c_eint_to_bit(irq));
- __raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
-}
-
-static inline void s3c_irq_eint_ack(unsigned int irq)
-{
- u32 bank = s3c_get_bank(irq);
-
- __raw_writel(s3c_eint_to_bit(irq), S5PC1XX_WKUP_INT_PEND(bank));
-}
-
-static void s3c_irq_eint_maskack(unsigned int irq)
-{
- /* compiler should in-line these */
- s3c_irq_eint_mask(irq);
- s3c_irq_eint_ack(irq);
-}
-
-static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
-{
- u32 bank = s3c_get_bank(irq);
- int real = s3c_get_eint(irq);
- int gpio, shift, sfn;
- u32 ctrl, con = 0;
-
- switch (type) {
- case IRQ_TYPE_NONE:
- printk(KERN_WARNING "No edge setting!\n");
- break;
-
- case IRQ_TYPE_EDGE_RISING:
- con = S5PC1XX_WKUP_INT_RISEEDGE;
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- con = S5PC1XX_WKUP_INT_FALLEDGE;
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- con = S5PC1XX_WKUP_INT_BOTHEDGE;
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- con = S5PC1XX_WKUP_INT_LOWLEV;
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- con = S5PC1XX_WKUP_INT_HILEV;
- break;
-
- default:
- printk(KERN_ERR "No such irq type %d", type);
- return -EINVAL;
- }
-
- gpio = real & (8 - 1);
- shift = gpio << 2;
-
- ctrl = __raw_readl(S5PC1XX_WKUP_INT_CON(bank));
- ctrl &= ~(0x7 << shift);
- ctrl |= con << shift;
- __raw_writel(ctrl, S5PC1XX_WKUP_INT_CON(bank));
-
- switch (real) {
- case 0 ... 7:
- gpio = S5PC100_GPH0(gpio);
- break;
- case 8 ... 15:
- gpio = S5PC100_GPH1(gpio);
- break;
- case 16 ... 23:
- gpio = S5PC100_GPH2(gpio);
- break;
- case 24 ... 31:
- gpio = S5PC100_GPH3(gpio);
- break;
- default:
- return -EINVAL;
- }
-
- sfn = S3C_GPIO_SFN(0x2);
- s3c_gpio_cfgpin(gpio, sfn);
-
- return 0;
-}
-
-static struct irq_chip s3c_irq_eint = {
- .name = "EINT",
- .mask = s3c_irq_eint_mask,
- .unmask = s3c_irq_eint_unmask,
- .mask_ack = s3c_irq_eint_maskack,
- .ack = s3c_irq_eint_ack,
- .set_type = s3c_irq_eint_set_type,
- .set_wake = s3c_irqext_wake,
-};
-
-/* s3c_irq_demux_eint
- *
- * This function demuxes the IRQ from external interrupts,
- * from IRQ_EINT(16) to IRQ_EINT(31). It is designed to be inlined into
- * the specific handlers s3c_irq_demux_eintX_Y.
- */
-static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
-{
- u32 status = __raw_readl(S5PC1XX_WKUP_INT_PEND((start >> 3)));
- u32 mask = __raw_readl(S5PC1XX_WKUP_INT_MASK((start >> 3)));
- unsigned int irq;
-
- status &= ~mask;
- status &= (1 << (end - start + 1)) - 1;
-
- for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
- if (status & 1)
- generic_handle_irq(irq);
-
- status >>= 1;
- }
-}
-
-static void s3c_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
- s3c_irq_demux_eint(16, 23);
- s3c_irq_demux_eint(24, 31);
-}
-
-/*
- * Handle EINT0 ... EINT15 at VIC directly
- */
-static void s3c_irq_vic_eint_mask(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- unsigned int real;
-
- s3c_irq_eint_mask(irq);
- real = s3c_get_eint(irq);
- writel(1 << real, base + VIC_INT_ENABLE_CLEAR);
-}
-
-static void s3c_irq_vic_eint_unmask(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- unsigned int real;
-
- s3c_irq_eint_unmask(irq);
- real = s3c_get_eint(irq);
- writel(1 << real, base + VIC_INT_ENABLE);
-}
-
-static inline void s3c_irq_vic_eint_ack(unsigned int irq)
-{
- u32 bit;
- u32 bank = s3c_get_bank(irq);
-
- bit = s3c_eint_to_bit(irq);
- __raw_writel(bit, S5PC1XX_WKUP_INT_PEND(bank));
-}
-
-static void s3c_irq_vic_eint_maskack(unsigned int irq)
-{
- /* compiler should in-line these */
- s3c_irq_vic_eint_mask(irq);
- s3c_irq_vic_eint_ack(irq);
-}
-
-static struct irq_chip s3c_irq_vic_eint = {
- .name = "EINT",
- .mask = s3c_irq_vic_eint_mask,
- .unmask = s3c_irq_vic_eint_unmask,
- .mask_ack = s3c_irq_vic_eint_maskack,
- .ack = s3c_irq_vic_eint_ack,
- .set_type = s3c_irq_eint_set_type,
- .set_wake = s3c_irqext_wake,
-};
-
-static int __init s5pc1xx_init_irq_eint(void)
-{
- int irq;
-
- for (irq = IRQ_EINT0; irq <= IRQ_EINT15; irq++) {
- set_irq_chip(irq, &s3c_irq_vic_eint);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
- set_irq_chip(irq, &s3c_irq_eint);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- set_irq_chained_handler(IRQ_EINT16_31, s3c_irq_demux_eint16_31);
-
- return 0;
-}
-
-arch_initcall(s5pc1xx_init_irq_eint);
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
deleted file mode 100644
index bfc5248..0000000
--- a/arch/arm/plat-s5pc1xx/irq.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/* arch/arm/plat-s5pc1xx/irq.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX - Interrupt handling
- *
- * Based on plat-s3c64xx/irq.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-#include <plat/irq-vic-timer.h>
-#include <plat/irq-uart.h>
-#include <plat/cpu.h>
-
-/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
- * are consecutive when looking up the interrupt in the demux routines.
- */
-static struct s3c_uart_irq uart_irqs[] = {
- [0] = {
- .regs = (void *)S3C_VA_UART0,
- .base_irq = IRQ_S3CUART_BASE0,
- .parent_irq = IRQ_UART0,
- },
- [1] = {
- .regs = (void *)S3C_VA_UART1,
- .base_irq = IRQ_S3CUART_BASE1,
- .parent_irq = IRQ_UART1,
- },
- [2] = {
- .regs = (void *)S3C_VA_UART2,
- .base_irq = IRQ_S3CUART_BASE2,
- .parent_irq = IRQ_UART2,
- },
- [3] = {
- .regs = (void *)S3C_VA_UART3,
- .base_irq = IRQ_S3CUART_BASE3,
- .parent_irq = IRQ_UART3,
- },
-};
-
-void __init s5pc1xx_init_irq(u32 *vic_valid, int num)
-{
- int i;
-
- printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
-
- /* initialise the pair of VICs */
- for (i = 0; i < num; i++)
- vic_init((void *)S5PC1XX_VA_VIC(i), S3C_IRQ(i * S3C_IRQ_OFFSET),
- vic_valid[i], 0);
-
- /* add the timer sub-irqs */
-
- s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
- s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
- s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2);
- s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3);
- s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4);
-
- s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
-}
-
-
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
deleted file mode 100644
index 2bf6c57..0000000
--- a/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+++ /dev/null
@@ -1,876 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/s5pc100-clock.c
- *
- * Copyright 2009 Samsung Electronics, Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 based common clock support
- *
- * Based on plat-s3c64xx/s3c6400-clock.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/devs.h>
-#include <plat/s5pc100.h>
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * ext_xtal_mux for want of an actual name from the manual.
-*/
-
-static struct clk clk_ext_xtal_mux = {
- .name = "ext_xtal",
- .id = -1,
-};
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-#define clk_fin_hpll clk_ext_xtal_mux
-
-#define clk_fout_mpll clk_mpll
-#define clk_vclk_54m clk_54m
-
-/* APLL */
-static struct clk clk_fout_apll = {
- .name = "fout_apll",
- .id = -1,
- .rate = 27000000,
-};
-
-static struct clk *clk_src_apll_list[] = {
- [0] = &clk_fin_apll,
- [1] = &clk_fout_apll,
-};
-
-static struct clksrc_sources clk_src_apll = {
- .sources = clk_src_apll_list,
- .nr_sources = ARRAY_SIZE(clk_src_apll_list),
-};
-
-static struct clksrc_clk clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- .id = -1,
- },
- .sources = &clk_src_apll,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 0, .size = 1, },
-};
-
-static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_APLL_MASK;
- ratio >>= S5PC100_CLKDIV0_APLL_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_apll = {
- .name = "dout_apll",
- .id = -1,
- .parent = &clk_mout_apll.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_apll_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_ARM_MASK;
- ratio >>= S5PC100_CLKDIV0_ARM_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static unsigned long s5pc100_clk_arm_round_rate(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- u32 div;
-
- if (parent < rate)
- return rate;
-
- div = (parent / rate) - 1;
- if (div > S5PC100_CLKDIV0_ARM_MASK)
- div = S5PC100_CLKDIV0_ARM_MASK;
-
- return parent / (div + 1);
-}
-
-static int s5pc100_clk_arm_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- u32 div;
- u32 val;
-
- if (rate < parent / (S5PC100_CLKDIV0_ARM_MASK + 1))
- return -EINVAL;
-
- rate = clk_round_rate(clk, rate);
- div = clk_get_rate(clk->parent) / rate;
-
- val = __raw_readl(S5PC100_CLKDIV0);
- val &= S5PC100_CLKDIV0_ARM_MASK;
- val |= (div - 1);
- __raw_writel(val, S5PC100_CLKDIV0);
-
- return 0;
-}
-
-static struct clk clk_arm = {
- .name = "armclk",
- .id = -1,
- .parent = &clk_dout_apll,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_arm_get_rate,
- .set_rate = s5pc100_clk_arm_set_rate,
- .round_rate = s5pc100_clk_arm_round_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_D0_MASK;
- ratio >>= S5PC100_CLKDIV0_D0_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_d0_bus = {
- .name = "dout_d0_bus",
- .id = -1,
- .parent = &clk_arm,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_d0_bus_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_PCLKD0_MASK;
- ratio >>= S5PC100_CLKDIV0_PCLKD0_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_pclkd0 = {
- .name = "dout_pclkd0",
- .id = -1,
- .parent = &clk_dout_d0_bus,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_pclkd0_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_APLL2_MASK;
- ratio >>= S5PC100_CLKDIV1_APLL2_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_apll2 = {
- .name = "dout_apll2",
- .id = -1,
- .parent = &clk_mout_apll.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_apll2_get_rate,
- },
-};
-
-/* MPLL */
-static struct clk *clk_src_mpll_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &clk_fout_mpll,
-};
-
-static struct clksrc_sources clk_src_mpll = {
- .sources = clk_src_mpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- .id = -1,
- },
- .sources = &clk_src_mpll,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 4, .size = 1, },
-};
-
-static struct clk *clkset_am_list[] = {
- [0] = &clk_mout_mpll.clk,
- [1] = &clk_dout_apll2,
-};
-
-static struct clksrc_sources clk_src_am = {
- .sources = clkset_am_list,
- .nr_sources = ARRAY_SIZE(clkset_am_list),
-};
-
-static struct clksrc_clk clk_mout_am = {
- .clk = {
- .name = "mout_am",
- .id = -1,
- },
- .sources = &clk_src_am,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 16, .size = 1, },
-};
-
-static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_D1_MASK;
- ratio >>= S5PC100_CLKDIV1_D1_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_d1_bus = {
- .name = "dout_d1_bus",
- .id = -1,
- .parent = &clk_mout_am.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_d1_bus_get_rate,
- },
-};
-
-static struct clk *clkset_onenand_list[] = {
- [0] = &clk_dout_d0_bus,
- [1] = &clk_dout_d1_bus,
-};
-
-static struct clksrc_sources clk_src_onenand = {
- .sources = clkset_onenand_list,
- .nr_sources = ARRAY_SIZE(clkset_onenand_list),
-};
-
-static struct clksrc_clk clk_mout_onenand = {
- .clk = {
- .name = "mout_onenand",
- .id = -1,
- },
- .sources = &clk_src_onenand,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 24, .size = 1, },
-};
-
-static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_PCLKD1_MASK;
- ratio >>= S5PC100_CLKDIV1_PCLKD1_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_pclkd1 = {
- .name = "dout_pclkd1",
- .id = -1,
- .parent = &clk_dout_d1_bus,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_pclkd1_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
- ratio >>= S5PC100_CLKDIV1_MPLL2_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_mpll2 = {
- .name = "dout_mpll2",
- .id = -1,
- .parent = &clk_mout_am.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_mpll2_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_CAM_MASK;
- ratio >>= S5PC100_CLKDIV1_CAM_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_cam = {
- .name = "dout_cam",
- .id = -1,
- .parent = &clk_dout_mpll2,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_cam_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL_MASK;
- ratio >>= S5PC100_CLKDIV1_MPLL_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_mpll = {
- .name = "dout_mpll",
- .id = -1,
- .parent = &clk_mout_am.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_mpll_get_rate,
- },
-};
-
-/* EPLL */
-static struct clk clk_fout_epll = {
- .name = "fout_epll",
- .id = -1,
-};
-
-static struct clk *clk_src_epll_list[] = {
- [0] = &clk_fin_epll,
- [1] = &clk_fout_epll,
-};
-
-static struct clksrc_sources clk_src_epll = {
- .sources = clk_src_epll_list,
- .nr_sources = ARRAY_SIZE(clk_src_epll_list),
-};
-
-static struct clksrc_clk clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- .id = -1,
- },
- .sources = &clk_src_epll,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 8, .size = 1, },
-};
-
-/* HPLL */
-static struct clk clk_fout_hpll = {
- .name = "fout_hpll",
- .id = -1,
-};
-
-static struct clk *clk_src_hpll_list[] = {
- [0] = &clk_27m,
- [1] = &clk_fout_hpll,
-};
-
-static struct clksrc_sources clk_src_hpll = {
- .sources = clk_src_hpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_hpll_list),
-};
-
-static struct clksrc_clk clk_mout_hpll = {
- .clk = {
- .name = "mout_hpll",
- .id = -1,
- },
- .sources = &clk_src_hpll,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 12, .size = 1, },
-};
-
-/* Peripherals */
-/*
- * The peripheral clocks are all controlled via clocksource followed
- * by an optional divider and gate stage. We currently roll this into
- * one clock which hides the intermediate clock from the mux.
- *
- * Note, the JPEG clock can only be an even divider...
- *
- * The scaler and LCD clocks depend on the S5PC100 version, and also
- * have a common parent divisor so are not included here.
- */
-
-static struct clk clk_iis_cd0 = {
- .name = "iis_cdclk0",
- .id = -1,
-};
-
-static struct clk clk_iis_cd1 = {
- .name = "iis_cdclk1",
- .id = -1,
-};
-
-static struct clk clk_iis_cd2 = {
- .name = "iis_cdclk2",
- .id = -1,
-};
-
-static struct clk clk_pcm_cd0 = {
- .name = "pcm_cdclk0",
- .id = -1,
-};
-
-static struct clk clk_pcm_cd1 = {
- .name = "pcm_cdclk1",
- .id = -1,
-};
-
-static struct clk *clkset_audio0_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
- &clk_iis_cd0,
- &clk_pcm_cd0,
- &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_audio0 = {
- .sources = clkset_audio0_list,
- .nr_sources = ARRAY_SIZE(clkset_audio0_list),
-};
-
-static struct clk *clkset_spi_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll2,
- &clk_fin_epll,
- &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_spi = {
- .sources = clkset_spi_list,
- .nr_sources = ARRAY_SIZE(clkset_spi_list),
-};
-
-static struct clk *clkset_uart_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
-};
-
-static struct clksrc_sources clkset_uart = {
- .sources = clkset_uart_list,
- .nr_sources = ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_audio1_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
- &clk_iis_cd1,
- &clk_pcm_cd1,
- &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_audio1 = {
- .sources = clkset_audio1_list,
- .nr_sources = ARRAY_SIZE(clkset_audio1_list),
-};
-
-static struct clk *clkset_audio2_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
- &clk_iis_cd2,
- &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_audio2 = {
- .sources = clkset_audio2_list,
- .nr_sources = ARRAY_SIZE(clkset_audio2_list),
-};
-
-static struct clksrc_clk clksrc_audio[] = {
- {
- .clk = {
- .name = "audio-bus",
- .id = 0,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO0,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_audio0,
- .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 12, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 12, .size = 3, },
- }, {
- .clk = {
- .name = "audio-bus",
- .id = 1,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO1,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_audio1,
- .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 16, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 16, .size = 3, },
- }, {
- .clk = {
- .name = "audio-bus",
- .id = 2,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO2,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_audio2,
- .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 20, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 20, .size = 3, },
- },
-};
-
-static struct clk *clkset_spdif_list[] = {
- &clksrc_audio[0].clk,
- &clksrc_audio[1].clk,
- &clksrc_audio[2].clk,
-};
-
-static struct clksrc_sources clkset_spdif = {
- .sources = clkset_spdif_list,
- .nr_sources = ARRAY_SIZE(clkset_spdif_list),
-};
-
-static struct clk *clkset_lcd_fimc_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_mout_hpll.clk,
- &clk_vclk_54m,
-};
-
-static struct clksrc_sources clkset_lcd_fimc = {
- .sources = clkset_lcd_fimc_list,
- .nr_sources = ARRAY_SIZE(clkset_lcd_fimc_list),
-};
-
-static struct clk *clkset_mmc_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
- &clk_mout_hpll.clk ,
-};
-
-static struct clksrc_sources clkset_mmc = {
- .sources = clkset_mmc_list,
- .nr_sources = ARRAY_SIZE(clkset_mmc_list),
-};
-
-static struct clk *clkset_usbhost_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_mout_hpll.clk,
- &clk_48m,
-};
-
-static struct clksrc_sources clkset_usbhost = {
- .sources = clkset_usbhost_list,
- .nr_sources = ARRAY_SIZE(clkset_usbhost_list),
-};
-
-static struct clksrc_clk clksrc_clks[] = {
- {
- .clk = {
- .name = "spi_bus",
- .id = 0,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0,
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clkset_spi,
- .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 4, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 4, .size = 2, },
- }, {
- .clk = {
- .name = "spi_bus",
- .id = 1,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_spi,
- .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 8, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 8, .size = 2, },
- }, {
- .clk = {
- .name = "spi_bus",
- .id = 2,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_spi,
- .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 12, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 12, .size = 2, },
- }, {
- .clk = {
- .name = "uclk1",
- .id = -1,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_UART,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_uart,
- .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 0, .size = 3, },
- .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 0, .size = 1, },
- }, {
- .clk = {
- .name = "spdif",
- .id = -1,
- },
- .sources = &clkset_spdif,
- .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 24, .size = 2, },
- }, {
- .clk = {
- .name = "lcd",
- .id = -1,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_LCD,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_lcd_fimc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 12, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 12, .size = 2, },
- }, {
- .clk = {
- .name = "fimc",
- .id = 0,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC0,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_lcd_fimc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 16, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 16, .size = 2, },
- }, {
- .clk = {
- .name = "fimc",
- .id = 1,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC1,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_lcd_fimc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 20, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 20, .size = 2, },
- }, {
- .clk = {
- .name = "fimc",
- .id = 2,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC2,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_lcd_fimc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 24, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 24, .size = 2, },
- }, {
- .clk = {
- .name = "mmc_bus",
- .id = 0,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_mmc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 0, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 0, .size = 2, },
- }, {
- .clk = {
- .name = "mmc_bus",
- .id = 1,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_mmc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 4, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 4, .size = 2, },
- }, {
- .clk = {
- .name = "mmc_bus",
- .id = 2,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_mmc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 8, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 8, .size = 2, },
- }, {
- .clk = {
- .name = "usbhost",
- .id = -1,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_USBHOST,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_usbhost,
- .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 20, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 20, .size = 2, },
- }
-};
-
-/* Clock initialisation code */
-
-static struct clksrc_clk *init_parents[] = {
- &clk_mout_apll,
- &clk_mout_mpll,
- &clk_mout_am,
- &clk_mout_onenand,
- &clk_mout_epll,
- &clk_mout_hpll,
-};
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-void __init_or_cpufreq s5pc100_setup_clocks(void)
-{
- struct clk *xtal_clk;
- unsigned long xtal;
- unsigned long armclk;
- unsigned long hclkd0;
- unsigned long hclk;
- unsigned long pclkd0;
- unsigned long pclk;
- unsigned long apll, mpll, epll, hpll;
- unsigned int ptr;
- u32 clkdiv0, clkdiv1;
-
- printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
- clkdiv0 = __raw_readl(S5PC100_CLKDIV0);
- clkdiv1 = __raw_readl(S5PC100_CLKDIV1);
-
- printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", __func__, clkdiv0, clkdiv1);
-
- xtal_clk = clk_get(NULL, "xtal");
- BUG_ON(IS_ERR(xtal_clk));
-
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
- apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_APLL_CON));
- mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_MPLL_CON));
- epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_EPLL_CON));
- hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
-
- printk(KERN_INFO "S5PC100: Apll=%ld.%03ld Mhz, Mpll=%ld.%03ld Mhz"
- ", Epll=%ld.%03ld Mhz, Hpll=%ld.%03ld Mhz\n",
- print_mhz(apll), print_mhz(mpll),
- print_mhz(epll), print_mhz(hpll));
-
- armclk = apll / GET_DIV(clkdiv0, S5PC100_CLKDIV0_APLL);
- armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
- hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
- pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
- hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
- pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
-
- printk(KERN_INFO "S5PC100: ARMCLK=%ld.%03ld MHz, HCLKD0=%ld.%03ld MHz,"
- " PCLKD0=%ld.%03ld MHz\n, HCLK=%ld.%03ld MHz,"
- " PCLK=%ld.%03ld MHz\n",
- print_mhz(armclk), print_mhz(hclkd0),
- print_mhz(pclkd0), print_mhz(hclk), print_mhz(pclk));
-
- clk_fout_apll.rate = apll;
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
- clk_fout_hpll.rate = hpll;
-
- clk_h.rate = hclk;
- clk_p.rate = pclk;
- clk_f.rate = armclk;
-
- for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
- s3c_set_clksrc(init_parents[ptr], true);
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrc_audio); ptr++)
- s3c_set_clksrc(clksrc_audio + ptr, true);
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
- s3c_set_clksrc(clksrc_clks + ptr, true);
-}
-
-static struct clk *clks[] __initdata = {
- &clk_ext_xtal_mux,
- &clk_dout_apll,
- &clk_dout_d0_bus,
- &clk_dout_pclkd0,
- &clk_dout_apll2,
- &clk_mout_apll.clk,
- &clk_mout_mpll.clk,
- &clk_mout_epll.clk,
- &clk_mout_hpll.clk,
- &clk_mout_am.clk,
- &clk_dout_d1_bus,
- &clk_mout_onenand.clk,
- &clk_dout_pclkd1,
- &clk_dout_mpll2,
- &clk_dout_cam,
- &clk_dout_mpll,
- &clk_fout_epll,
- &clk_iis_cd0,
- &clk_iis_cd1,
- &clk_iis_cd2,
- &clk_pcm_cd0,
- &clk_pcm_cd1,
- &clk_arm,
-};
-
-void __init s5pc100_register_clocks(void)
-{
- struct clk *clkp;
- int ret;
- int ptr;
-
- for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
- clkp = clks[ptr];
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
- }
-
- s3c_register_clksrc(clksrc_audio, ARRAY_SIZE(clksrc_audio));
- s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
-}
--
1.6.4
WARNING: multiple messages have this Message-ID (diff)
From: m.szyprowski@samsung.com (Marek Szyprowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 11/11] ARM: remove obsolete plat-s5pc1xx directory
Date: Tue, 18 May 2010 12:38:49 +0200 [thread overview]
Message-ID: <1274179129-14659-12-git-send-email-m.szyprowski@samsung.com> (raw)
In-Reply-To: <1274179129-14659-1-git-send-email-m.szyprowski@samsung.com>
This patch removes all obsolete files from plat-s5pc1xx. This directory is
no longer needed. S5PC100 SoC is now completely supported in plat-s5p
framework.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
arch/arm/plat-s5pc1xx/Kconfig | 42 --
arch/arm/plat-s5pc1xx/Makefile | 25 -
arch/arm/plat-s5pc1xx/clock.c | 709 ------------------
arch/arm/plat-s5pc1xx/cpu.c | 122 ----
arch/arm/plat-s5pc1xx/dev-uart.c | 145 ----
arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h | 44 --
arch/arm/plat-s5pc1xx/include/plat/irqs.h | 198 -----
arch/arm/plat-s5pc1xx/include/plat/pll.h | 38 -
arch/arm/plat-s5pc1xx/include/plat/regs-clock.h | 252 -------
arch/arm/plat-s5pc1xx/include/plat/regs-power.h | 84 ---
arch/arm/plat-s5pc1xx/include/plat/s5pc100.h | 64 --
arch/arm/plat-s5pc1xx/irq-eint.c | 281 --------
arch/arm/plat-s5pc1xx/irq.c | 75 --
arch/arm/plat-s5pc1xx/s5pc100-clock.c | 876 -----------------------
14 files changed, 0 insertions(+), 2955 deletions(-)
delete mode 100644 arch/arm/plat-s5pc1xx/Kconfig
delete mode 100644 arch/arm/plat-s5pc1xx/Makefile
delete mode 100644 arch/arm/plat-s5pc1xx/clock.c
delete mode 100644 arch/arm/plat-s5pc1xx/cpu.c
delete mode 100644 arch/arm/plat-s5pc1xx/dev-uart.c
delete mode 100644 arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
delete mode 100644 arch/arm/plat-s5pc1xx/include/plat/irqs.h
delete mode 100644 arch/arm/plat-s5pc1xx/include/plat/pll.h
delete mode 100644 arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
delete mode 100644 arch/arm/plat-s5pc1xx/include/plat/regs-power.h
delete mode 100644 arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
delete mode 100644 arch/arm/plat-s5pc1xx/irq-eint.c
delete mode 100644 arch/arm/plat-s5pc1xx/irq.c
delete mode 100644 arch/arm/plat-s5pc1xx/s5pc100-clock.c
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
deleted file mode 100644
index ab58758..0000000
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ /dev/null
@@ -1,42 +0,0 @@
-# Copyright 2009 Samsung Electronics Co.
-# Byungho Min <bhmin@samsung.com>
-#
-# Licensed under GPLv2
-
-config PLAT_S5PC1XX
- bool
- depends on ARCH_S5PC1XX
- default y
- select PLAT_S3C
- select ARM_VIC
- select NO_IOPORT
- select ARCH_REQUIRE_GPIOLIB
- select SAMSUNG_CLKSRC
- select SAMSUNG_IRQ_UART
- select SAMSUNG_IRQ_VIC_TIMER
- select S3C_GPIO_TRACK
- select S3C_GPIO_PULL_UPDOWN
- select S5P_GPIO_DRVSTR
- select S3C_GPIO_CFG_S3C24XX
- select S3C_GPIO_CFG_S3C64XX
- select SAMSUNG_GPIOLIB_4BIT
- help
- Base platform code for any Samsung S5PC1XX device
-
-if PLAT_S5PC1XX
-
-# Configuration options shared by all S3C64XX implementations
-
-config CPU_S5PC100_INIT
- bool
- help
- Common initialisation code for the S5PC1XX
-
-config CPU_S5PC100_CLOCK
- bool
- help
- Common clock support code for the S5PC1XX
-
-# platform specific device setup
-
-endif
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
deleted file mode 100644
index d490543..0000000
--- a/arch/arm/plat-s5pc1xx/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-# arch/arm/plat-s5pc1xx/Makefile
-#
-# Copyright 2009 Samsung Electronics Co.
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n := dummy.o
-obj- :=
-
-# Core files
-
-obj-y += dev-uart.o
-obj-y += cpu.o
-obj-y += irq.o
-obj-y += clock.o
-
-# CPU support
-
-obj-$(CONFIG_CPU_S5PC100_INIT) += s5pc100-init.o
-obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o
-
-# Device setup
-
diff --git a/arch/arm/plat-s5pc1xx/clock.c b/arch/arm/plat-s5pc1xx/clock.c
deleted file mode 100644
index 387f231..0000000
--- a/arch/arm/plat-s5pc1xx/clock.c
+++ /dev/null
@@ -1,709 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/clock.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *
- * S5PC1XX Base clock support
- *
- * Based on plat-s3c64xx/clock.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/regs-clock.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-struct clk clk_27m = {
- .name = "clk_27m",
- .id = -1,
- .rate = 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
- unsigned long flags;
- u32 val;
-
- /* can't rely on clock lock, this register has other usages */
- local_irq_save(flags);
-
- val = __raw_readl(S5PC100_CLKSRC1);
- if (enable)
- val |= S5PC100_CLKSRC1_CLK48M_MASK;
- else
- val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
-
- __raw_writel(val, S5PC100_CLKSRC1);
- local_irq_restore(flags);
-
- return 0;
-}
-
-struct clk clk_48m = {
- .name = "clk_48m",
- .id = -1,
- .rate = 48000000,
- .enable = clk_48m_ctrl,
-};
-
-struct clk clk_54m = {
- .name = "clk_54m",
- .id = -1,
- .rate = 54000000,
-};
-
-struct clk clk_hd0 = {
- .name = "hclkd0",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
- .ops = &clk_ops_def_setrate,
-};
-
-struct clk clk_pd0 = {
- .name = "pclkd0",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
- .ops = &clk_ops_def_setrate,
-};
-
-static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable)
-{
- unsigned int ctrlbit = clk->ctrlbit;
- u32 con;
-
- con = __raw_readl(reg);
- if (enable)
- con |= ctrlbit;
- else
- con &= ~ctrlbit;
- __raw_writel(con, reg);
-
- return 0;
-}
-
-static int s5pc100_clk_d00_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
-}
-
-static int s5pc100_clk_d01_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
-}
-
-static int s5pc100_clk_d02_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
-}
-
-static int s5pc100_clk_d10_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
-}
-
-static int s5pc100_clk_d11_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
-}
-
-static int s5pc100_clk_d12_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
-}
-
-static int s5pc100_clk_d13_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
-}
-
-static int s5pc100_clk_d14_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
-}
-
-static int s5pc100_clk_d15_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
-}
-
-static int s5pc100_clk_d20_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
-}
-
-int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
-}
-
-int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
-}
-
-static struct clk s5pc100_init_clocks_disable[] = {
- {
- .name = "dsi",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_DSI,
- }, {
- .name = "csi",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_CSI,
- }, {
- .name = "ccan",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_CCAN0,
- }, {
- .name = "ccan",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_CCAN1,
- }, {
- .name = "keypad",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_KEYIF,
- }, {
- .name = "hclkd2",
- .id = -1,
- .parent = NULL,
- .enable = s5pc100_clk_d20_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D20_HCLKD2,
- }, {
- .name = "iis-d2",
- .id = -1,
- .parent = NULL,
- .enable = s5pc100_clk_d20_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D20_I2SD2,
- },
-};
-
-static struct clk s5pc100_init_clocks[] = {
- /* System1 (D0_0) devices */
- {
- .name = "intc",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_INTC,
- }, {
- .name = "tzic",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_TZIC,
- }, {
- .name = "cf-ata",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_CFCON,
- }, {
- .name = "mdma",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_MDMA,
- }, {
- .name = "g2d",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_G2D,
- }, {
- .name = "secss",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_SECSS,
- }, {
- .name = "cssys",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_CSSYS,
- },
-
- /* Memory (D0_1) devices */
- {
- .name = "dmc",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_DMC,
- }, {
- .name = "sromc",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_SROMC,
- }, {
- .name = "onenand",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_ONENAND,
- }, {
- .name = "nand",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_NFCON,
- }, {
- .name = "intmem",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_INTMEM,
- }, {
- .name = "ebi",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_EBI,
- },
-
- /* System2 (D0_2) devices */
- {
- .name = "seckey",
- .id = -1,
- .parent = &clk_pd0,
- .enable = s5pc100_clk_d02_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D02_SECKEY,
- }, {
- .name = "sdm",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d02_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D02_SDM,
- },
-
- /* File (D1_0) devices */
- {
- .name = "pdma",
- .id = 0,
- .parent = &clk_h,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_PDMA0,
- }, {
- .name = "pdma",
- .id = 1,
- .parent = &clk_h,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_PDMA1,
- }, {
- .name = "usb-host",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_USBHOST,
- }, {
- .name = "otg",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_USBOTG,
- }, {
- .name = "modem",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_MODEMIF,
- }, {
- .name = "hsmmc",
- .id = 0,
- .parent = &clk_48m,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_HSMMC0,
- }, {
- .name = "hsmmc",
- .id = 1,
- .parent = &clk_48m,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_HSMMC1,
- }, {
- .name = "hsmmc",
- .id = 2,
- .parent = &clk_48m,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_HSMMC2,
- },
-
- /* Multimedia1 (D1_1) devices */
- {
- .name = "lcd",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_LCD,
- }, {
- .name = "rotator",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_ROTATOR,
- }, {
- .name = "fimc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_FIMC0,
- }, {
- .name = "fimc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_FIMC1,
- }, {
- .name = "fimc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_FIMC2,
- }, {
- .name = "jpeg",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_JPEG,
- }, {
- .name = "g3d",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_G3D,
- },
-
- /* Multimedia2 (D1_2) devices */
- {
- .name = "tv",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_TV,
- }, {
- .name = "vp",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_VP,
- }, {
- .name = "mixer",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_MIXER,
- }, {
- .name = "hdmi",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_HDMI,
- }, {
- .name = "mfc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_MFC,
- },
-
- /* System (D1_3) devices */
- {
- .name = "chipid",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_CHIPID,
- }, {
- .name = "gpio",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_GPIO,
- }, {
- .name = "apc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_APC,
- }, {
- .name = "iec",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_IEC,
- }, {
- .name = "timers",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_PWM,
- }, {
- .name = "systimer",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_SYSTIMER,
- }, {
- .name = "watchdog",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_WDT,
- }, {
- .name = "rtc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_RTC,
- },
-
- /* Connectivity (D1_4) devices */
- {
- .name = "uart",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART0,
- }, {
- .name = "uart",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART1,
- }, {
- .name = "uart",
- .id = 2,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART2,
- }, {
- .name = "uart",
- .id = 3,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART3,
- }, {
- .name = "i2c",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_IIC,
- }, {
- .name = "hdmi-i2c",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_HDMI_IIC,
- }, {
- .name = "spi",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_SPI0,
- }, {
- .name = "spi",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_SPI1,
- }, {
- .name = "spi",
- .id = 2,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_SPI2,
- }, {
- .name = "irda",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_IRDA,
- }, {
- .name = "hsitx",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_HSITX,
- }, {
- .name = "hsirx",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_HSIRX,
- },
-
- /* Audio (D1_5) devices */
- {
- .name = "iis",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_IIS0,
- }, {
- .name = "iis",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_IIS1,
- }, {
- .name = "iis",
- .id = 2,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_IIS2,
- }, {
- .name = "ac97",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_AC97,
- }, {
- .name = "pcm",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_PCM0,
- }, {
- .name = "pcm",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_PCM1,
- }, {
- .name = "spdif",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_SPDIF,
- }, {
- .name = "adc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_TSADC,
- }, {
- .name = "cg",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_CG,
- },
-
- /* Audio (D2_0) devices: all disabled */
-
- /* Special Clocks 0 */
- {
- .name = "sclk_hpm",
- .id = -1,
- .parent = NULL,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_HPM,
- }, {
- .name = "sclk_onenand",
- .id = -1,
- .parent = NULL,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_ONENAND,
- }, {
- .name = "spi_48",
- .id = 0,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0_48,
- }, {
- .name = "spi_48",
- .id = 1,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1_48,
- }, {
- .name = "spi_48",
- .id = 2,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2_48,
- }, {
- .name = "mmc_48",
- .id = 0,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0_48,
- }, {
- .name = "mmc_48",
- .id = 1,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1_48,
- }, {
- .name = "mmc_48",
- .id = 2,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2_48,
- },
- /* Special Clocks 1 */
-};
-
-static struct clk *clks[] __initdata = {
- &clk_ext,
- &clk_epll,
- &clk_pd0,
- &clk_hd0,
- &clk_27m,
- &clk_48m,
- &clk_54m,
-};
-
-void __init s5pc1xx_register_clocks(void)
-{
- struct clk *clkp;
- int ret;
- int ptr;
- int size;
-
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- s3c_register_clocks(s5pc100_init_clocks,
- ARRAY_SIZE(s5pc100_init_clocks));
-
- clkp = s5pc100_init_clocks_disable;
- size = ARRAY_SIZE(s5pc100_init_clocks_disable);
-
- for (ptr = 0; ptr < size; ptr++, clkp++) {
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
-
- (clkp->enable)(clkp, 0);
- }
-
- s3c_pwmclk_init();
-}
diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c
deleted file mode 100644
index 02baeaa..0000000
--- a/arch/arm/plat-s5pc1xx/cpu.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/cpu.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX CPU Support
- *
- * Based on plat-s3c64xx/cpu.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <asm/mach/map.h>
-
-#include <plat/regs-serial.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-#include <plat/s5pc100.h>
-
-/* table of supported CPUs */
-
-static const char name_s5pc100[] = "S5PC100";
-
-static struct cpu_table cpu_ids[] __initdata = {
- {
- .idcode = 0x43100000,
- .idmask = 0xfffff000,
- .map_io = s5pc100_map_io,
- .init_clocks = s5pc100_init_clocks,
- .init_uarts = s5pc100_init_uarts,
- .init = s5pc100_init,
- .name = name_s5pc100,
- },
-};
-/* minimal IO mapping */
-
-/* see notes on uart map in arch/arm/mach-s5pc100/include/mach/debug-macro.S */
-#define UART_OFFS (S3C_PA_UART & 0xffff)
-
-static struct map_desc s5pc1xx_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5PC1XX_VA_CLK_OTHER,
- .pfn = __phys_to_pfn(S5PC1XX_PA_CLK_OTHER),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_GPIO,
- .pfn = __phys_to_pfn(S5PC100_PA_GPIO),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_CHIPID,
- .pfn = __phys_to_pfn(S5PC1XX_PA_CHIPID),
- .length = SZ_16,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_CLK,
- .pfn = __phys_to_pfn(S5PC1XX_PA_CLK),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_PWR,
- .pfn = __phys_to_pfn(S5PC1XX_PA_PWR),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)(S5PC1XX_VA_UART),
- .pfn = __phys_to_pfn(S5PC1XX_PA_UART),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_VIC(0),
- .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(0)),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_VIC(1),
- .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(1)),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_VIC(2),
- .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(2)),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_TIMER,
- .pfn = __phys_to_pfn(S5PC1XX_PA_TIMER),
- .length = SZ_256,
- .type = MT_DEVICE,
- },
-};
-
-/* read cpu identification code */
-
-void __init s5pc1xx_init_io(struct map_desc *mach_desc, int size)
-{
- unsigned long idcode;
-
- /* initialise the io descriptors we need for initialisation */
- iotable_init(s5pc1xx_iodesc, ARRAY_SIZE(s5pc1xx_iodesc));
- iotable_init(mach_desc, size);
-
- idcode = __raw_readl(S5PC1XX_VA_CHIPID);
- s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c
deleted file mode 100644
index 586c95c..0000000
--- a/arch/arm/plat-s5pc1xx/dev-uart.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/dev-uart.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Based on plat-s3c64xx/dev-uart.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-/* Serial port registrations */
-
-/* 64xx uarts are closer together */
-
-static struct resource s5pc1xx_uart0_resource[] = {
- [0] = {
- .start = S3C_PA_UART0,
- .end = S3C_PA_UART0 + 0x100,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX0,
- .end = IRQ_S3CUART_RX0,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S3CUART_TX0,
- .end = IRQ_S3CUART_TX0,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR0,
- .end = IRQ_S3CUART_ERR0,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource s5pc1xx_uart1_resource[] = {
- [0] = {
- .start = S3C_PA_UART1,
- .end = S3C_PA_UART1 + 0x100,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX1,
- .end = IRQ_S3CUART_RX1,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S3CUART_TX1,
- .end = IRQ_S3CUART_TX1,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR1,
- .end = IRQ_S3CUART_ERR1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource s5pc1xx_uart2_resource[] = {
- [0] = {
- .start = S3C_PA_UART2,
- .end = S3C_PA_UART2 + 0x100,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX2,
- .end = IRQ_S3CUART_RX2,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S3CUART_TX2,
- .end = IRQ_S3CUART_TX2,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR2,
- .end = IRQ_S3CUART_ERR2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource s5pc1xx_uart3_resource[] = {
- [0] = {
- .start = S3C_PA_UART3,
- .end = S3C_PA_UART3 + 0x100,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX3,
- .end = IRQ_S3CUART_RX3,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S3CUART_TX3,
- .end = IRQ_S3CUART_TX3,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR3,
- .end = IRQ_S3CUART_ERR3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-
-struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
- [0] = {
- .resources = s5pc1xx_uart0_resource,
- .nr_resources = ARRAY_SIZE(s5pc1xx_uart0_resource),
- },
- [1] = {
- .resources = s5pc1xx_uart1_resource,
- .nr_resources = ARRAY_SIZE(s5pc1xx_uart1_resource),
- },
- [2] = {
- .resources = s5pc1xx_uart2_resource,
- .nr_resources = ARRAY_SIZE(s5pc1xx_uart2_resource),
- },
- [3] = {
- .resources = s5pc1xx_uart3_resource,
- .nr_resources = ARRAY_SIZE(s5pc1xx_uart3_resource),
- },
-};
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
deleted file mode 100644
index 33ad267..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-eint.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *
- * External Interrupt (GPH0 ~ GPH3) control register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S5PC1XX_WKUP_INT_CON0_7 (S5PC1XX_EINT_BASE + 0x0)
-#define S5PC1XX_WKUP_INT_CON8_15 (S5PC1XX_EINT_BASE + 0x4)
-#define S5PC1XX_WKUP_INT_CON16_23 (S5PC1XX_EINT_BASE + 0x8)
-#define S5PC1XX_WKUP_INT_CON24_31 (S5PC1XX_EINT_BASE + 0xC)
-#define S5PC1XX_WKUP_INT_CON(x) (S5PC1XX_WKUP_INT_CON0_7 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_FLTCON0_3 (S5PC1XX_EINT_BASE + 0x80)
-#define S5PC1XX_WKUP_INT_FLTCON4_7 (S5PC1XX_EINT_BASE + 0x84)
-#define S5PC1XX_WKUP_INT_FLTCON8_11 (S5PC1XX_EINT_BASE + 0x88)
-#define S5PC1XX_WKUP_INT_FLTCON12_15 (S5PC1XX_EINT_BASE + 0x8C)
-#define S5PC1XX_WKUP_INT_FLTCON16_19 (S5PC1XX_EINT_BASE + 0x90)
-#define S5PC1XX_WKUP_INT_FLTCON20_23 (S5PC1XX_EINT_BASE + 0x94)
-#define S5PC1XX_WKUP_INT_FLTCON24_27 (S5PC1XX_EINT_BASE + 0x98)
-#define S5PC1XX_WKUP_INT_FLTCON28_31 (S5PC1XX_EINT_BASE + 0x9C)
-#define S5PC1XX_WKUP_INT_FLTCON(x) (S5PC1XX_WKUP_INT_FLTCON0_3 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_MASK0_7 (S5PC1XX_EINT_BASE + 0x100)
-#define S5PC1XX_WKUP_INT_MASK8_15 (S5PC1XX_EINT_BASE + 0x104)
-#define S5PC1XX_WKUP_INT_MASK16_23 (S5PC1XX_EINT_BASE + 0x108)
-#define S5PC1XX_WKUP_INT_MASK24_31 (S5PC1XX_EINT_BASE + 0x10C)
-#define S5PC1XX_WKUP_INT_MASK(x) (S5PC1XX_WKUP_INT_MASK0_7 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_PEND0_7 (S5PC1XX_EINT_BASE + 0x140)
-#define S5PC1XX_WKUP_INT_PEND8_15 (S5PC1XX_EINT_BASE + 0x144)
-#define S5PC1XX_WKUP_INT_PEND16_23 (S5PC1XX_EINT_BASE + 0x148)
-#define S5PC1XX_WKUP_INT_PEND24_31 (S5PC1XX_EINT_BASE + 0x14C)
-#define S5PC1XX_WKUP_INT_PEND(x) (S5PC1XX_WKUP_INT_PEND0_7 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_LOWLEV (0x00)
-#define S5PC1XX_WKUP_INT_HILEV (0x01)
-#define S5PC1XX_WKUP_INT_FALLEDGE (0x02)
-#define S5PC1XX_WKUP_INT_RISEEDGE (0x03)
-#define S5PC1XX_WKUP_INT_BOTHEDGE (0x04)
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
deleted file mode 100644
index 409c804..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/irqs.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX - Common IRQ support
- *
- * Based on plat-s3c64xx/include/plat/irqs.h
- */
-
-#ifndef __ASM_PLAT_S5PC1XX_IRQS_H
-#define __ASM_PLAT_S5PC1XX_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- *
- * note, since we're using the VICs, our start must be a
- * mulitple of 32 to allow the common code to work
- */
-
-#define S3C_IRQ_OFFSET (32)
-
-#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET)
-
-#define S3C_VIC0_BASE S3C_IRQ(0)
-#define S3C_VIC1_BASE S3C_IRQ(32)
-#define S3C_VIC2_BASE S3C_IRQ(64)
-
-/* UART interrupts, each UART has 4 intterupts per channel so
- * use the space between the ISA and S3C main interrupts. Note, these
- * are not in the same order as the S3C24XX series! */
-
-#define IRQ_S3CUART_BASE0 (16)
-#define IRQ_S3CUART_BASE1 (20)
-#define IRQ_S3CUART_BASE2 (24)
-#define IRQ_S3CUART_BASE3 (28)
-
-#define UART_IRQ_RXD (0)
-#define UART_IRQ_ERR (1)
-#define UART_IRQ_TXD (2)
-#define UART_IRQ_MODEM (3)
-
-#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
-
-/* VIC based IRQs */
-
-#define S5PC1XX_IRQ_VIC0(x) (S3C_VIC0_BASE + (x))
-#define S5PC1XX_IRQ_VIC1(x) (S3C_VIC1_BASE + (x))
-#define S5PC1XX_IRQ_VIC2(x) (S3C_VIC2_BASE + (x))
-
-/*
- * VIC0: system, DMA, timer
- */
-#define IRQ_EINT0 S5PC1XX_IRQ_VIC0(0)
-#define IRQ_EINT1 S5PC1XX_IRQ_VIC0(1)
-#define IRQ_EINT2 S5PC1XX_IRQ_VIC0(2)
-#define IRQ_EINT3 S5PC1XX_IRQ_VIC0(3)
-#define IRQ_EINT4 S5PC1XX_IRQ_VIC0(4)
-#define IRQ_EINT5 S5PC1XX_IRQ_VIC0(5)
-#define IRQ_EINT6 S5PC1XX_IRQ_VIC0(6)
-#define IRQ_EINT7 S5PC1XX_IRQ_VIC0(7)
-#define IRQ_EINT8 S5PC1XX_IRQ_VIC0(8)
-#define IRQ_EINT9 S5PC1XX_IRQ_VIC0(9)
-#define IRQ_EINT10 S5PC1XX_IRQ_VIC0(10)
-#define IRQ_EINT11 S5PC1XX_IRQ_VIC0(11)
-#define IRQ_EINT12 S5PC1XX_IRQ_VIC0(12)
-#define IRQ_EINT13 S5PC1XX_IRQ_VIC0(13)
-#define IRQ_EINT14 S5PC1XX_IRQ_VIC0(14)
-#define IRQ_EINT15 S5PC1XX_IRQ_VIC0(15)
-#define IRQ_EINT16_31 S5PC1XX_IRQ_VIC0(16)
-#define IRQ_BATF S5PC1XX_IRQ_VIC0(17)
-#define IRQ_MDMA S5PC1XX_IRQ_VIC0(18)
-#define IRQ_PDMA0 S5PC1XX_IRQ_VIC0(19)
-#define IRQ_PDMA1 S5PC1XX_IRQ_VIC0(20)
-#define IRQ_TIMER0_VIC S5PC1XX_IRQ_VIC0(21)
-#define IRQ_TIMER1_VIC S5PC1XX_IRQ_VIC0(22)
-#define IRQ_TIMER2_VIC S5PC1XX_IRQ_VIC0(23)
-#define IRQ_TIMER3_VIC S5PC1XX_IRQ_VIC0(24)
-#define IRQ_TIMER4_VIC S5PC1XX_IRQ_VIC0(25)
-#define IRQ_SYSTIMER S5PC1XX_IRQ_VIC0(26)
-#define IRQ_WDT S5PC1XX_IRQ_VIC0(27)
-#define IRQ_RTC_ALARM S5PC1XX_IRQ_VIC0(28)
-#define IRQ_RTC_TIC S5PC1XX_IRQ_VIC0(29)
-#define IRQ_GPIOINT S5PC1XX_IRQ_VIC0(30)
-
-/*
- * VIC1: ARM, power, memory, connectivity
- */
-#define IRQ_CORTEX0 S5PC1XX_IRQ_VIC1(0)
-#define IRQ_CORTEX1 S5PC1XX_IRQ_VIC1(1)
-#define IRQ_CORTEX2 S5PC1XX_IRQ_VIC1(2)
-#define IRQ_CORTEX3 S5PC1XX_IRQ_VIC1(3)
-#define IRQ_CORTEX4 S5PC1XX_IRQ_VIC1(4)
-#define IRQ_IEMAPC S5PC1XX_IRQ_VIC1(5)
-#define IRQ_IEMIEC S5PC1XX_IRQ_VIC1(6)
-#define IRQ_ONENAND S5PC1XX_IRQ_VIC1(7)
-#define IRQ_NFC S5PC1XX_IRQ_VIC1(8)
-#define IRQ_CFC S5PC1XX_IRQ_VIC1(9)
-#define IRQ_UART0 S5PC1XX_IRQ_VIC1(10)
-#define IRQ_UART1 S5PC1XX_IRQ_VIC1(11)
-#define IRQ_UART2 S5PC1XX_IRQ_VIC1(12)
-#define IRQ_UART3 S5PC1XX_IRQ_VIC1(13)
-#define IRQ_IIC S5PC1XX_IRQ_VIC1(14)
-#define IRQ_SPI0 S5PC1XX_IRQ_VIC1(15)
-#define IRQ_SPI1 S5PC1XX_IRQ_VIC1(16)
-#define IRQ_SPI2 S5PC1XX_IRQ_VIC1(17)
-#define IRQ_IRDA S5PC1XX_IRQ_VIC1(18)
-#define IRQ_CAN0 S5PC1XX_IRQ_VIC1(19)
-#define IRQ_CAN1 S5PC1XX_IRQ_VIC1(20)
-#define IRQ_HSIRX S5PC1XX_IRQ_VIC1(21)
-#define IRQ_HSITX S5PC1XX_IRQ_VIC1(22)
-#define IRQ_UHOST S5PC1XX_IRQ_VIC1(23)
-#define IRQ_OTG S5PC1XX_IRQ_VIC1(24)
-#define IRQ_MSM S5PC1XX_IRQ_VIC1(25)
-#define IRQ_HSMMC0 S5PC1XX_IRQ_VIC1(26)
-#define IRQ_HSMMC1 S5PC1XX_IRQ_VIC1(27)
-#define IRQ_HSMMC2 S5PC1XX_IRQ_VIC1(28)
-#define IRQ_MIPICSI S5PC1XX_IRQ_VIC1(29)
-#define IRQ_MIPIDSI S5PC1XX_IRQ_VIC1(30)
-
-/*
- * VIC2: multimedia, audio, security
- */
-#define IRQ_LCD0 S5PC1XX_IRQ_VIC2(0)
-#define IRQ_LCD1 S5PC1XX_IRQ_VIC2(1)
-#define IRQ_LCD2 S5PC1XX_IRQ_VIC2(2)
-#define IRQ_LCD3 S5PC1XX_IRQ_VIC2(3)
-#define IRQ_ROTATOR S5PC1XX_IRQ_VIC2(4)
-#define IRQ_FIMC0 S5PC1XX_IRQ_VIC2(5)
-#define IRQ_FIMC1 S5PC1XX_IRQ_VIC2(6)
-#define IRQ_FIMC2 S5PC1XX_IRQ_VIC2(7)
-#define IRQ_JPEG S5PC1XX_IRQ_VIC2(8)
-#define IRQ_2D S5PC1XX_IRQ_VIC2(9)
-#define IRQ_3D S5PC1XX_IRQ_VIC2(10)
-#define IRQ_MIXER S5PC1XX_IRQ_VIC2(11)
-#define IRQ_HDMI S5PC1XX_IRQ_VIC2(12)
-#define IRQ_IIC1 S5PC1XX_IRQ_VIC2(13)
-#define IRQ_MFC S5PC1XX_IRQ_VIC2(14)
-#define IRQ_TVENC S5PC1XX_IRQ_VIC2(15)
-#define IRQ_I2S0 S5PC1XX_IRQ_VIC2(16)
-#define IRQ_I2S1 S5PC1XX_IRQ_VIC2(17)
-#define IRQ_I2S2 S5PC1XX_IRQ_VIC2(18)
-#define IRQ_AC97 S5PC1XX_IRQ_VIC2(19)
-#define IRQ_PCM0 S5PC1XX_IRQ_VIC2(20)
-#define IRQ_PCM1 S5PC1XX_IRQ_VIC2(21)
-#define IRQ_SPDIF S5PC1XX_IRQ_VIC2(22)
-#define IRQ_ADC S5PC1XX_IRQ_VIC2(23)
-#define IRQ_PENDN S5PC1XX_IRQ_VIC2(24)
-#define IRQ_TC IRQ_PENDN
-#define IRQ_KEYPAD S5PC1XX_IRQ_VIC2(25)
-#define IRQ_CG S5PC1XX_IRQ_VIC2(26)
-#define IRQ_SEC S5PC1XX_IRQ_VIC2(27)
-#define IRQ_SECRX S5PC1XX_IRQ_VIC2(28)
-#define IRQ_SECTX S5PC1XX_IRQ_VIC2(29)
-#define IRQ_SDMIRQ S5PC1XX_IRQ_VIC2(30)
-#define IRQ_SDMFIQ S5PC1XX_IRQ_VIC2(31)
-
-#define IRQ_TIMER(x) (IRQ_SDMFIQ + 1 + (x))
-#define IRQ_TIMER0 IRQ_TIMER(0)
-#define IRQ_TIMER1 IRQ_TIMER(1)
-#define IRQ_TIMER2 IRQ_TIMER(2)
-#define IRQ_TIMER3 IRQ_TIMER(3)
-#define IRQ_TIMER4 IRQ_TIMER(4)
-
-/* External interrupt */
-#define S3C_IRQ_EINT_BASE (IRQ_SDMFIQ + 6)
-
-#define S3C_EINT(x) (S3C_IRQ_EINT_BASE + (x - 16))
-#define IRQ_EINT(x) (x < 16 ? IRQ_EINT0 + x : S3C_EINT(x))
-#define IRQ_EINT_BIT(x) (x < IRQ_EINT16_31 ? x - IRQ_EINT0 : x - S3C_EINT(0))
-
-/* GPIO interrupt */
-#define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1)
-#define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x))
-
-/*
- * Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs
- */
-#define NR_IRQS (S3C_IRQ_GPIO(320) + 1)
-
-#endif /* __ASM_PLAT_S5PC1XX_IRQS_H */
-
diff --git a/arch/arm/plat-s5pc1xx/include/plat/pll.h b/arch/arm/plat-s5pc1xx/include/plat/pll.h
deleted file mode 100644
index 21afef1..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/pll.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/pll.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX PLL code
- *
- * Based on plat-s3c64xx/include/plat/pll.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S5P_PLL_MDIV_MASK ((1 << (25-16+1)) - 1)
-#define S5P_PLL_PDIV_MASK ((1 << (13-8+1)) - 1)
-#define S5P_PLL_SDIV_MASK ((1 << (2-0+1)) - 1)
-#define S5P_PLL_MDIV_SHIFT (16)
-#define S5P_PLL_PDIV_SHIFT (8)
-#define S5P_PLL_SDIV_SHIFT (0)
-
-#include <asm/div64.h>
-
-static inline unsigned long s5pc1xx_get_pll(unsigned long baseclk,
- u32 pllcon)
-{
- u32 mdiv, pdiv, sdiv;
- u64 fvco = baseclk;
-
- mdiv = (pllcon >> S5P_PLL_MDIV_SHIFT) & S5P_PLL_MDIV_MASK;
- pdiv = (pllcon >> S5P_PLL_PDIV_SHIFT) & S5P_PLL_PDIV_MASK;
- sdiv = (pllcon >> S5P_PLL_SDIV_SHIFT) & S5P_PLL_SDIV_MASK;
-
- fvco *= mdiv;
- do_div(fvco, (pdiv << sdiv));
-
- return (unsigned long)fvco;
-}
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
deleted file mode 100644
index 24dec4e..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_CLOCK_H
-#define __PLAT_REGS_CLOCK_H __FILE__
-
-#define S5PC100_CLKREG(x) (S5PC1XX_VA_CLK + (x))
-#define S5PC100_CLKREG_OTHER(x) (S5PC1XX_VA_CLK_OTHER + (x))
-
-/* s5pc100 register for clock */
-#define S5PC100_APLL_LOCK S5PC100_CLKREG(0x00)
-#define S5PC100_MPLL_LOCK S5PC100_CLKREG(0x04)
-#define S5PC100_EPLL_LOCK S5PC100_CLKREG(0x08)
-#define S5PC100_HPLL_LOCK S5PC100_CLKREG(0x0C)
-
-#define S5PC100_APLL_CON S5PC100_CLKREG(0x100)
-#define S5PC100_MPLL_CON S5PC100_CLKREG(0x104)
-#define S5PC100_EPLL_CON S5PC100_CLKREG(0x108)
-#define S5PC100_HPLL_CON S5PC100_CLKREG(0x10C)
-
-#define S5PC100_CLKSRC0 S5PC100_CLKREG(0x200)
-#define S5PC100_CLKSRC1 S5PC100_CLKREG(0x204)
-#define S5PC100_CLKSRC2 S5PC100_CLKREG(0x208)
-#define S5PC100_CLKSRC3 S5PC100_CLKREG(0x20C)
-
-#define S5PC100_CLKDIV0 S5PC100_CLKREG(0x300)
-#define S5PC100_CLKDIV1 S5PC100_CLKREG(0x304)
-#define S5PC100_CLKDIV2 S5PC100_CLKREG(0x308)
-#define S5PC100_CLKDIV3 S5PC100_CLKREG(0x30C)
-#define S5PC100_CLKDIV4 S5PC100_CLKREG(0x310)
-
-#define S5PC100_CLK_OUT S5PC100_CLKREG(0x400)
-
-#define S5PC100_CLKGATE_D00 S5PC100_CLKREG(0x500)
-#define S5PC100_CLKGATE_D01 S5PC100_CLKREG(0x504)
-#define S5PC100_CLKGATE_D02 S5PC100_CLKREG(0x508)
-
-#define S5PC100_CLKGATE_D10 S5PC100_CLKREG(0x520)
-#define S5PC100_CLKGATE_D11 S5PC100_CLKREG(0x524)
-#define S5PC100_CLKGATE_D12 S5PC100_CLKREG(0x528)
-#define S5PC100_CLKGATE_D13 S5PC100_CLKREG(0x52C)
-#define S5PC100_CLKGATE_D14 S5PC100_CLKREG(0x530)
-#define S5PC100_CLKGATE_D15 S5PC100_CLKREG(0x534)
-
-#define S5PC100_CLKGATE_D20 S5PC100_CLKREG(0x540)
-
-#define S5PC100_SCLKGATE0 S5PC100_CLKREG(0x560)
-#define S5PC100_SCLKGATE1 S5PC100_CLKREG(0x564)
-
-/* EPLL_CON */
-#define S5PC100_EPLL_EN (1<<31)
-#define S5PC100_EPLL_MASK 0xffffffff
-#define S5PC100_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s)))
-
-/* CLKSRC0..CLKSRC3 -> mostly removed due to clksrc updates */
-#define S5PC100_CLKSRC1_CLK48M_MASK (0x1<<24)
-#define S5PC100_CLKSRC1_CLK48M_SHIFT (24)
-
-/* CLKDIV0 */
-#define S5PC100_CLKDIV0_APLL_MASK (0x1<<0)
-#define S5PC100_CLKDIV0_APLL_SHIFT (0)
-#define S5PC100_CLKDIV0_ARM_MASK (0x7<<4)
-#define S5PC100_CLKDIV0_ARM_SHIFT (4)
-#define S5PC100_CLKDIV0_D0_MASK (0x7<<8)
-#define S5PC100_CLKDIV0_D0_SHIFT (8)
-#define S5PC100_CLKDIV0_PCLKD0_MASK (0x7<<12)
-#define S5PC100_CLKDIV0_PCLKD0_SHIFT (12)
-#define S5PC100_CLKDIV0_SECSS_MASK (0x7<<16)
-#define S5PC100_CLKDIV0_SECSS_SHIFT (16)
-
-/* CLKDIV1 (OneNAND clock only used in one place, removed) */
-#define S5PC100_CLKDIV1_APLL2_MASK (0x7<<0)
-#define S5PC100_CLKDIV1_APLL2_SHIFT (0)
-#define S5PC100_CLKDIV1_MPLL_MASK (0x3<<4)
-#define S5PC100_CLKDIV1_MPLL_SHIFT (4)
-#define S5PC100_CLKDIV1_MPLL2_MASK (0x1<<8)
-#define S5PC100_CLKDIV1_MPLL2_SHIFT (8)
-#define S5PC100_CLKDIV1_D1_MASK (0x7<<12)
-#define S5PC100_CLKDIV1_D1_SHIFT (12)
-#define S5PC100_CLKDIV1_PCLKD1_MASK (0x7<<16)
-#define S5PC100_CLKDIV1_PCLKD1_SHIFT (16)
-#define S5PC100_CLKDIV1_CAM_MASK (0x1F<<24)
-#define S5PC100_CLKDIV1_CAM_SHIFT (24)
-
-/* CLKDIV2 => removed in clksrc update */
-/* CLKDIV3 => removed in clksrc update, or not needed */
-/* CLKDIV4 => removed in clksrc update, or not needed */
-
-/* HCLKD0/PCLKD0 Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_D00_INTC (1<<0)
-#define S5PC100_CLKGATE_D00_TZIC (1<<1)
-#define S5PC100_CLKGATE_D00_CFCON (1<<2)
-#define S5PC100_CLKGATE_D00_MDMA (1<<3)
-#define S5PC100_CLKGATE_D00_G2D (1<<4)
-#define S5PC100_CLKGATE_D00_SECSS (1<<5)
-#define S5PC100_CLKGATE_D00_CSSYS (1<<6)
-
-/* HCLKD0/PCLKD0 Clock Gate 1 Registers */
-#define S5PC100_CLKGATE_D01_DMC (1<<0)
-#define S5PC100_CLKGATE_D01_SROMC (1<<1)
-#define S5PC100_CLKGATE_D01_ONENAND (1<<2)
-#define S5PC100_CLKGATE_D01_NFCON (1<<3)
-#define S5PC100_CLKGATE_D01_INTMEM (1<<4)
-#define S5PC100_CLKGATE_D01_EBI (1<<5)
-
-/* PCLKD0 Clock Gate 2 Registers */
-#define S5PC100_CLKGATE_D02_SECKEY (1<<1)
-#define S5PC100_CLKGATE_D02_SDM (1<<2)
-
-/* HCLKD1/PCLKD1 Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_D10_PDMA0 (1<<0)
-#define S5PC100_CLKGATE_D10_PDMA1 (1<<1)
-#define S5PC100_CLKGATE_D10_USBHOST (1<<2)
-#define S5PC100_CLKGATE_D10_USBOTG (1<<3)
-#define S5PC100_CLKGATE_D10_MODEMIF (1<<4)
-#define S5PC100_CLKGATE_D10_HSMMC0 (1<<5)
-#define S5PC100_CLKGATE_D10_HSMMC1 (1<<6)
-#define S5PC100_CLKGATE_D10_HSMMC2 (1<<7)
-
-/* HCLKD1/PCLKD1 Clock Gate 1 Registers */
-#define S5PC100_CLKGATE_D11_LCD (1<<0)
-#define S5PC100_CLKGATE_D11_ROTATOR (1<<1)
-#define S5PC100_CLKGATE_D11_FIMC0 (1<<2)
-#define S5PC100_CLKGATE_D11_FIMC1 (1<<3)
-#define S5PC100_CLKGATE_D11_FIMC2 (1<<4)
-#define S5PC100_CLKGATE_D11_JPEG (1<<5)
-#define S5PC100_CLKGATE_D11_DSI (1<<6)
-#define S5PC100_CLKGATE_D11_CSI (1<<7)
-#define S5PC100_CLKGATE_D11_G3D (1<<8)
-
-/* HCLKD1/PCLKD1 Clock Gate 2 Registers */
-#define S5PC100_CLKGATE_D12_TV (1<<0)
-#define S5PC100_CLKGATE_D12_VP (1<<1)
-#define S5PC100_CLKGATE_D12_MIXER (1<<2)
-#define S5PC100_CLKGATE_D12_HDMI (1<<3)
-#define S5PC100_CLKGATE_D12_MFC (1<<4)
-
-/* HCLKD1/PCLKD1 Clock Gate 3 Registers */
-#define S5PC100_CLKGATE_D13_CHIPID (1<<0)
-#define S5PC100_CLKGATE_D13_GPIO (1<<1)
-#define S5PC100_CLKGATE_D13_APC (1<<2)
-#define S5PC100_CLKGATE_D13_IEC (1<<3)
-#define S5PC100_CLKGATE_D13_PWM (1<<6)
-#define S5PC100_CLKGATE_D13_SYSTIMER (1<<7)
-#define S5PC100_CLKGATE_D13_WDT (1<<8)
-#define S5PC100_CLKGATE_D13_RTC (1<<9)
-
-/* HCLKD1/PCLKD1 Clock Gate 4 Registers */
-#define S5PC100_CLKGATE_D14_UART0 (1<<0)
-#define S5PC100_CLKGATE_D14_UART1 (1<<1)
-#define S5PC100_CLKGATE_D14_UART2 (1<<2)
-#define S5PC100_CLKGATE_D14_UART3 (1<<3)
-#define S5PC100_CLKGATE_D14_IIC (1<<4)
-#define S5PC100_CLKGATE_D14_HDMI_IIC (1<<5)
-#define S5PC100_CLKGATE_D14_SPI0 (1<<6)
-#define S5PC100_CLKGATE_D14_SPI1 (1<<7)
-#define S5PC100_CLKGATE_D14_SPI2 (1<<8)
-#define S5PC100_CLKGATE_D14_IRDA (1<<9)
-#define S5PC100_CLKGATE_D14_CCAN0 (1<<10)
-#define S5PC100_CLKGATE_D14_CCAN1 (1<<11)
-#define S5PC100_CLKGATE_D14_HSITX (1<<12)
-#define S5PC100_CLKGATE_D14_HSIRX (1<<13)
-
-/* HCLKD1/PCLKD1 Clock Gate 5 Registers */
-#define S5PC100_CLKGATE_D15_IIS0 (1<<0)
-#define S5PC100_CLKGATE_D15_IIS1 (1<<1)
-#define S5PC100_CLKGATE_D15_IIS2 (1<<2)
-#define S5PC100_CLKGATE_D15_AC97 (1<<3)
-#define S5PC100_CLKGATE_D15_PCM0 (1<<4)
-#define S5PC100_CLKGATE_D15_PCM1 (1<<5)
-#define S5PC100_CLKGATE_D15_SPDIF (1<<6)
-#define S5PC100_CLKGATE_D15_TSADC (1<<7)
-#define S5PC100_CLKGATE_D15_KEYIF (1<<8)
-#define S5PC100_CLKGATE_D15_CG (1<<9)
-
-/* HCLKD2 Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_D20_HCLKD2 (1<<0)
-#define S5PC100_CLKGATE_D20_I2SD2 (1<<1)
-
-/* Special Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_SCLK0_HPM (1<<0)
-#define S5PC100_CLKGATE_SCLK0_PWI (1<<1)
-#define S5PC100_CLKGATE_SCLK0_ONENAND (1<<2)
-#define S5PC100_CLKGATE_SCLK0_UART (1<<3)
-#define S5PC100_CLKGATE_SCLK0_SPI0 (1<<4)
-#define S5PC100_CLKGATE_SCLK0_SPI1 (1<<5)
-#define S5PC100_CLKGATE_SCLK0_SPI2 (1<<6)
-#define S5PC100_CLKGATE_SCLK0_SPI0_48 (1<<7)
-#define S5PC100_CLKGATE_SCLK0_SPI1_48 (1<<8)
-#define S5PC100_CLKGATE_SCLK0_SPI2_48 (1<<9)
-#define S5PC100_CLKGATE_SCLK0_IRDA (1<<10)
-#define S5PC100_CLKGATE_SCLK0_USBHOST (1<<11)
-#define S5PC100_CLKGATE_SCLK0_MMC0 (1<<12)
-#define S5PC100_CLKGATE_SCLK0_MMC1 (1<<13)
-#define S5PC100_CLKGATE_SCLK0_MMC2 (1<<14)
-#define S5PC100_CLKGATE_SCLK0_MMC0_48 (1<<15)
-#define S5PC100_CLKGATE_SCLK0_MMC1_48 (1<<16)
-#define S5PC100_CLKGATE_SCLK0_MMC2_48 (1<<17)
-
-/* Special Clock Gate 1 Registers */
-#define S5PC100_CLKGATE_SCLK1_LCD (1<<0)
-#define S5PC100_CLKGATE_SCLK1_FIMC0 (1<<1)
-#define S5PC100_CLKGATE_SCLK1_FIMC1 (1<<2)
-#define S5PC100_CLKGATE_SCLK1_FIMC2 (1<<3)
-#define S5PC100_CLKGATE_SCLK1_TV54 (1<<4)
-#define S5PC100_CLKGATE_SCLK1_VDAC54 (1<<5)
-#define S5PC100_CLKGATE_SCLK1_MIXER (1<<6)
-#define S5PC100_CLKGATE_SCLK1_HDMI (1<<7)
-#define S5PC100_CLKGATE_SCLK1_AUDIO0 (1<<8)
-#define S5PC100_CLKGATE_SCLK1_AUDIO1 (1<<9)
-#define S5PC100_CLKGATE_SCLK1_AUDIO2 (1<<10)
-#define S5PC100_CLKGATE_SCLK1_SPDIF (1<<11)
-#define S5PC100_CLKGATE_SCLK1_CAM (1<<12)
-
-#define S5PC100_SWRESET S5PC100_CLKREG_OTHER(0x000)
-#define S5PC100_OND_SWRESET S5PC100_CLKREG_OTHER(0x008)
-#define S5PC100_GEN_CTRL S5PC100_CLKREG_OTHER(0x100)
-#define S5PC100_GEN_STATUS S5PC100_CLKREG_OTHER(0x104)
-#define S5PC100_MEM_SYS_CFG S5PC100_CLKREG_OTHER(0x200)
-#define S5PC100_CAM_MUX_SEL S5PC100_CLKREG_OTHER(0x300)
-#define S5PC100_MIXER_OUT_SEL S5PC100_CLKREG_OTHER(0x304)
-#define S5PC100_LPMP_MODE_SEL S5PC100_CLKREG_OTHER(0x308)
-#define S5PC100_MIPI_PHY_CON0 S5PC100_CLKREG_OTHER(0x400)
-#define S5PC100_MIPI_PHY_CON1 S5PC100_CLKREG_OTHER(0x414)
-#define S5PC100_HDMI_PHY_CON0 S5PC100_CLKREG_OTHER(0x420)
-
-#define S5PC100_SWRESET_RESETVAL 0xc100
-#define S5PC100_OTHER_SYS_INT 24
-#define S5PC100_OTHER_STA_TYPE 23
-#define STA_TYPE_EXPON 0
-#define STA_TYPE_SFR 1
-
-#define S5PC100_SLEEP_CFG_OSC_EN 0
-
-/* OTHERS Resgister */
-#define S5PC100_OTHERS_USB_SIG_MASK (1 << 16)
-#define S5PC100_OTHERS_MIPI_DPHY_EN (1 << 28)
-
-/* MIPI D-PHY Control Register 0 */
-#define S5PC100_MIPI_PHY_CON0_M_RESETN (1 << 1)
-#define S5PC100_MIPI_PHY_CON0_S_RESETN (1 << 0)
-
-#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-power.h b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
deleted file mode 100644
index 02ffa49..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Jongse Won <jongse.won@samsung.com>
- *
- * S5PC1XX clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_REGS_PWR
-#define __ASM_ARM_REGS_PWR __FILE__
-
-#define S5PC1XX_PWRREG(x) (S5PC1XX_VA_PWR + (x))
-
-/* s5pc100 (0xE0108000) register for power management */
-#define S5PC100_PWR_CFG S5PC1XX_PWRREG(0x0)
-#define S5PC100_EINT_WAKEUP_MASK S5PC1XX_PWRREG(0x4)
-#define S5PC100_NORMAL_CFG S5PC1XX_PWRREG(0x10)
-#define S5PC100_STOP_CFG S5PC1XX_PWRREG(0x14)
-#define S5PC100_SLEEP_CFG S5PC1XX_PWRREG(0x18)
-#define S5PC100_STOP_MEM_CFG S5PC1XX_PWRREG(0x1C)
-#define S5PC100_OSC_FREQ S5PC1XX_PWRREG(0x100)
-#define S5PC100_OSC_STABLE S5PC1XX_PWRREG(0x104)
-#define S5PC100_PWR_STABLE S5PC1XX_PWRREG(0x108)
-#define S5PC100_MTC_STABLE S5PC1XX_PWRREG(0x110)
-#define S5PC100_CLAMP_STABLE S5PC1XX_PWRREG(0x114)
-#define S5PC100_OTHERS S5PC1XX_PWRREG(0x200)
-#define S5PC100_RST_STAT S5PC1XX_PWRREG(0x300)
-#define S5PC100_WAKEUP_STAT S5PC1XX_PWRREG(0x304)
-#define S5PC100_BLK_PWR_STAT S5PC1XX_PWRREG(0x308)
-#define S5PC100_INFORM0 S5PC1XX_PWRREG(0x400)
-#define S5PC100_INFORM1 S5PC1XX_PWRREG(0x404)
-#define S5PC100_INFORM2 S5PC1XX_PWRREG(0x408)
-#define S5PC100_INFORM3 S5PC1XX_PWRREG(0x40C)
-#define S5PC100_INFORM4 S5PC1XX_PWRREG(0x410)
-#define S5PC100_INFORM5 S5PC1XX_PWRREG(0x414)
-#define S5PC100_INFORM6 S5PC1XX_PWRREG(0x418)
-#define S5PC100_INFORM7 S5PC1XX_PWRREG(0x41C)
-#define S5PC100_DCGIDX_MAP0 S5PC1XX_PWRREG(0x500)
-#define S5PC100_DCGIDX_MAP1 S5PC1XX_PWRREG(0x504)
-#define S5PC100_DCGIDX_MAP2 S5PC1XX_PWRREG(0x508)
-#define S5PC100_DCGPERF_MAP0 S5PC1XX_PWRREG(0x50C)
-#define S5PC100_DCGPERF_MAP1 S5PC1XX_PWRREG(0x510)
-#define S5PC100_DVCIDX_MAP S5PC1XX_PWRREG(0x514)
-#define S5PC100_FREQ_CPU S5PC1XX_PWRREG(0x518)
-#define S5PC100_FREQ_DPM S5PC1XX_PWRREG(0x51C)
-#define S5PC100_DVSEMCLK_EN S5PC1XX_PWRREG(0x520)
-#define S5PC100_APLL_CON_L8 S5PC1XX_PWRREG(0x600)
-#define S5PC100_APLL_CON_L7 S5PC1XX_PWRREG(0x604)
-#define S5PC100_APLL_CON_L6 S5PC1XX_PWRREG(0x608)
-#define S5PC100_APLL_CON_L5 S5PC1XX_PWRREG(0x60C)
-#define S5PC100_APLL_CON_L4 S5PC1XX_PWRREG(0x610)
-#define S5PC100_APLL_CON_L3 S5PC1XX_PWRREG(0x614)
-#define S5PC100_APLL_CON_L2 S5PC1XX_PWRREG(0x618)
-#define S5PC100_APLL_CON_L1 S5PC1XX_PWRREG(0x61C)
-#define S5PC100_IEM_CONTROL S5PC1XX_PWRREG(0x620)
-#define S5PC100_CLKDIV_IEM_L8 S5PC1XX_PWRREG(0x700)
-#define S5PC100_CLKDIV_IEM_L7 S5PC1XX_PWRREG(0x704)
-#define S5PC100_CLKDIV_IEM_L6 S5PC1XX_PWRREG(0x708)
-#define S5PC100_CLKDIV_IEM_L5 S5PC1XX_PWRREG(0x70C)
-#define S5PC100_CLKDIV_IEM_L4 S5PC1XX_PWRREG(0x710)
-#define S5PC100_CLKDIV_IEM_L3 S5PC1XX_PWRREG(0x714)
-#define S5PC100_CLKDIV_IEM_L2 S5PC1XX_PWRREG(0x718)
-#define S5PC100_CLKDIV_IEM_L1 S5PC1XX_PWRREG(0x71C)
-#define S5PC100_IEM_HPMCLK_DIV S5PC1XX_PWRREG(0x724)
-
-/* PWR_CFG */
-#define S5PC100_PWRCFG_CFG_DEEP_IDLE (1 << 31)
-#define S5PC100_PWRCFG_CFG_WFI_MASK (3 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_IDLE (0 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE (1 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_STOP (2 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_SLEEP (3 << 5)
-
-/* SLEEP_CFG */
-#define S5PC100_SLEEP_OSC_EN_SLEEP (1 << 0)
-
-/* OTHERS */
-#define S5PC100_PMU_INT_DISABLE (1 << 24)
-
-#endif /* __ASM_ARM_REGS_PWR */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
deleted file mode 100644
index 2531f34..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Header file for s5pc100 cpu support
- *
- * Based on plat-s3c64xx/include/plat/s3c6400.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5PC100 related SoCs */
-extern int s5pc100_init(void);
-extern void s5pc100_map_io(void);
-extern void s5pc100_init_clocks(int xtal);
-extern int s5pc100_register_baseclocks(unsigned long xtal);
-extern void s5pc100_init_irq(void);
-extern void s5pc100_init_io(struct map_desc *mach_desc, int size);
-extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s5pc100_register_clocks(void);
-extern void s5pc100_setup_clocks(void);
-extern struct sysdev_class s5pc100_sysclass;
-
-#define s5pc100_init_uarts s5pc100_common_init_uarts
-
-/* Some day, belows will be moved to plat-s5pc/include/plat/cpu.h */
-extern void s5pc1xx_init_irq(u32 *vic_valid, int num);
-extern void s5pc1xx_init_io(struct map_desc *mach_desc, int size);
-
-/* Some day, belows will be moved to plat-s5pc/include/plat/clock.h */
-extern struct clk clk_hpll;
-extern struct clk clk_hd0;
-extern struct clk clk_pd0;
-extern struct clk clk_54m;
-extern void s5pc1xx_register_clocks(void);
-extern int s5pc100_sclk0_ctrl(struct clk *clk, int enable);
-extern int s5pc100_sclk1_ctrl(struct clk *clk, int enable);
-
-/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
-extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
-extern struct platform_device s3c_device_g2d;
-extern struct platform_device s3c_device_g3d;
-extern struct platform_device s3c_device_vpp;
-extern struct platform_device s3c_device_tvenc;
-extern struct platform_device s3c_device_tvscaler;
-extern struct platform_device s3c_device_rotator;
-extern struct platform_device s3c_device_jpeg;
-extern struct platform_device s3c_device_onenand;
-extern struct platform_device s3c_device_usb_otghcd;
-extern struct platform_device s3c_device_keypad;
-extern struct platform_device s3c_device_ts;
-extern struct platform_device s3c_device_g3d;
-extern struct platform_device s3c_device_smc911x;
-extern struct platform_device s3c_device_fimc0;
-extern struct platform_device s3c_device_fimc1;
-extern struct platform_device s3c_device_mfc;
-extern struct platform_device s3c_device_ac97;
-extern struct platform_device s3c_device_fimc0;
-extern struct platform_device s3c_device_fimc1;
-extern struct platform_device s3c_device_fimc2;
-
diff --git a/arch/arm/plat-s5pc1xx/irq-eint.c b/arch/arm/plat-s5pc1xx/irq-eint.c
deleted file mode 100644
index 373122f..0000000
--- a/arch/arm/plat-s5pc1xx/irq-eint.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * linux/arch/arm/plat-s5pc1xx/irq-eint.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- * Kyungin Park <kyungmin.park@samsung.com>
- *
- * Based on plat-s3c64xx/irq-eint.c
- *
- * S5PC1XX - Interrupt handling for IRQ_EINT(x)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/pm.h>
-#include <linux/gpio.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-ext.h>
-#include <plat/pm.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-irqtype.h>
-
-/*
- * bank is a group of external interrupt
- * bank0 means EINT0 ... EINT7
- * bank1 means EINT8 ... EINT15
- * bank2 means EINT16 ... EINT23
- * bank3 means EINT24 ... EINT31
- */
-
-static inline int s3c_get_eint(unsigned int irq)
-{
- int real;
-
- if (irq < IRQ_EINT16_31)
- real = (irq - IRQ_EINT0);
- else
- real = (irq - S3C_IRQ_EINT_BASE) + IRQ_EINT16_31 - IRQ_EINT0;
-
- return real;
-}
-
-static inline int s3c_get_bank(unsigned int irq)
-{
- return s3c_get_eint(irq) >> 3;
-}
-
-static inline int s3c_eint_to_bit(unsigned int irq)
-{
- int real, bit;
-
- real = s3c_get_eint(irq);
- bit = 1 << (real & (8 - 1));
-
- return bit;
-}
-
-static inline void s3c_irq_eint_mask(unsigned int irq)
-{
- u32 mask;
- u32 bank = s3c_get_bank(irq);
-
- mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
- mask |= s3c_eint_to_bit(irq);
- __raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
-}
-
-static void s3c_irq_eint_unmask(unsigned int irq)
-{
- u32 mask;
- u32 bank = s3c_get_bank(irq);
-
- mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
- mask &= ~(s3c_eint_to_bit(irq));
- __raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
-}
-
-static inline void s3c_irq_eint_ack(unsigned int irq)
-{
- u32 bank = s3c_get_bank(irq);
-
- __raw_writel(s3c_eint_to_bit(irq), S5PC1XX_WKUP_INT_PEND(bank));
-}
-
-static void s3c_irq_eint_maskack(unsigned int irq)
-{
- /* compiler should in-line these */
- s3c_irq_eint_mask(irq);
- s3c_irq_eint_ack(irq);
-}
-
-static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
-{
- u32 bank = s3c_get_bank(irq);
- int real = s3c_get_eint(irq);
- int gpio, shift, sfn;
- u32 ctrl, con = 0;
-
- switch (type) {
- case IRQ_TYPE_NONE:
- printk(KERN_WARNING "No edge setting!\n");
- break;
-
- case IRQ_TYPE_EDGE_RISING:
- con = S5PC1XX_WKUP_INT_RISEEDGE;
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- con = S5PC1XX_WKUP_INT_FALLEDGE;
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- con = S5PC1XX_WKUP_INT_BOTHEDGE;
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- con = S5PC1XX_WKUP_INT_LOWLEV;
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- con = S5PC1XX_WKUP_INT_HILEV;
- break;
-
- default:
- printk(KERN_ERR "No such irq type %d", type);
- return -EINVAL;
- }
-
- gpio = real & (8 - 1);
- shift = gpio << 2;
-
- ctrl = __raw_readl(S5PC1XX_WKUP_INT_CON(bank));
- ctrl &= ~(0x7 << shift);
- ctrl |= con << shift;
- __raw_writel(ctrl, S5PC1XX_WKUP_INT_CON(bank));
-
- switch (real) {
- case 0 ... 7:
- gpio = S5PC100_GPH0(gpio);
- break;
- case 8 ... 15:
- gpio = S5PC100_GPH1(gpio);
- break;
- case 16 ... 23:
- gpio = S5PC100_GPH2(gpio);
- break;
- case 24 ... 31:
- gpio = S5PC100_GPH3(gpio);
- break;
- default:
- return -EINVAL;
- }
-
- sfn = S3C_GPIO_SFN(0x2);
- s3c_gpio_cfgpin(gpio, sfn);
-
- return 0;
-}
-
-static struct irq_chip s3c_irq_eint = {
- .name = "EINT",
- .mask = s3c_irq_eint_mask,
- .unmask = s3c_irq_eint_unmask,
- .mask_ack = s3c_irq_eint_maskack,
- .ack = s3c_irq_eint_ack,
- .set_type = s3c_irq_eint_set_type,
- .set_wake = s3c_irqext_wake,
-};
-
-/* s3c_irq_demux_eint
- *
- * This function demuxes the IRQ from external interrupts,
- * from IRQ_EINT(16) to IRQ_EINT(31). It is designed to be inlined into
- * the specific handlers s3c_irq_demux_eintX_Y.
- */
-static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
-{
- u32 status = __raw_readl(S5PC1XX_WKUP_INT_PEND((start >> 3)));
- u32 mask = __raw_readl(S5PC1XX_WKUP_INT_MASK((start >> 3)));
- unsigned int irq;
-
- status &= ~mask;
- status &= (1 << (end - start + 1)) - 1;
-
- for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
- if (status & 1)
- generic_handle_irq(irq);
-
- status >>= 1;
- }
-}
-
-static void s3c_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
- s3c_irq_demux_eint(16, 23);
- s3c_irq_demux_eint(24, 31);
-}
-
-/*
- * Handle EINT0 ... EINT15 at VIC directly
- */
-static void s3c_irq_vic_eint_mask(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- unsigned int real;
-
- s3c_irq_eint_mask(irq);
- real = s3c_get_eint(irq);
- writel(1 << real, base + VIC_INT_ENABLE_CLEAR);
-}
-
-static void s3c_irq_vic_eint_unmask(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- unsigned int real;
-
- s3c_irq_eint_unmask(irq);
- real = s3c_get_eint(irq);
- writel(1 << real, base + VIC_INT_ENABLE);
-}
-
-static inline void s3c_irq_vic_eint_ack(unsigned int irq)
-{
- u32 bit;
- u32 bank = s3c_get_bank(irq);
-
- bit = s3c_eint_to_bit(irq);
- __raw_writel(bit, S5PC1XX_WKUP_INT_PEND(bank));
-}
-
-static void s3c_irq_vic_eint_maskack(unsigned int irq)
-{
- /* compiler should in-line these */
- s3c_irq_vic_eint_mask(irq);
- s3c_irq_vic_eint_ack(irq);
-}
-
-static struct irq_chip s3c_irq_vic_eint = {
- .name = "EINT",
- .mask = s3c_irq_vic_eint_mask,
- .unmask = s3c_irq_vic_eint_unmask,
- .mask_ack = s3c_irq_vic_eint_maskack,
- .ack = s3c_irq_vic_eint_ack,
- .set_type = s3c_irq_eint_set_type,
- .set_wake = s3c_irqext_wake,
-};
-
-static int __init s5pc1xx_init_irq_eint(void)
-{
- int irq;
-
- for (irq = IRQ_EINT0; irq <= IRQ_EINT15; irq++) {
- set_irq_chip(irq, &s3c_irq_vic_eint);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
- set_irq_chip(irq, &s3c_irq_eint);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- set_irq_chained_handler(IRQ_EINT16_31, s3c_irq_demux_eint16_31);
-
- return 0;
-}
-
-arch_initcall(s5pc1xx_init_irq_eint);
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
deleted file mode 100644
index bfc5248..0000000
--- a/arch/arm/plat-s5pc1xx/irq.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/* arch/arm/plat-s5pc1xx/irq.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX - Interrupt handling
- *
- * Based on plat-s3c64xx/irq.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-#include <plat/irq-vic-timer.h>
-#include <plat/irq-uart.h>
-#include <plat/cpu.h>
-
-/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
- * are consecutive when looking up the interrupt in the demux routines.
- */
-static struct s3c_uart_irq uart_irqs[] = {
- [0] = {
- .regs = (void *)S3C_VA_UART0,
- .base_irq = IRQ_S3CUART_BASE0,
- .parent_irq = IRQ_UART0,
- },
- [1] = {
- .regs = (void *)S3C_VA_UART1,
- .base_irq = IRQ_S3CUART_BASE1,
- .parent_irq = IRQ_UART1,
- },
- [2] = {
- .regs = (void *)S3C_VA_UART2,
- .base_irq = IRQ_S3CUART_BASE2,
- .parent_irq = IRQ_UART2,
- },
- [3] = {
- .regs = (void *)S3C_VA_UART3,
- .base_irq = IRQ_S3CUART_BASE3,
- .parent_irq = IRQ_UART3,
- },
-};
-
-void __init s5pc1xx_init_irq(u32 *vic_valid, int num)
-{
- int i;
-
- printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
-
- /* initialise the pair of VICs */
- for (i = 0; i < num; i++)
- vic_init((void *)S5PC1XX_VA_VIC(i), S3C_IRQ(i * S3C_IRQ_OFFSET),
- vic_valid[i], 0);
-
- /* add the timer sub-irqs */
-
- s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
- s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
- s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2);
- s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3);
- s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4);
-
- s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
-}
-
-
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
deleted file mode 100644
index 2bf6c57..0000000
--- a/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+++ /dev/null
@@ -1,876 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/s5pc100-clock.c
- *
- * Copyright 2009 Samsung Electronics, Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 based common clock support
- *
- * Based on plat-s3c64xx/s3c6400-clock.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/devs.h>
-#include <plat/s5pc100.h>
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * ext_xtal_mux for want of an actual name from the manual.
-*/
-
-static struct clk clk_ext_xtal_mux = {
- .name = "ext_xtal",
- .id = -1,
-};
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-#define clk_fin_hpll clk_ext_xtal_mux
-
-#define clk_fout_mpll clk_mpll
-#define clk_vclk_54m clk_54m
-
-/* APLL */
-static struct clk clk_fout_apll = {
- .name = "fout_apll",
- .id = -1,
- .rate = 27000000,
-};
-
-static struct clk *clk_src_apll_list[] = {
- [0] = &clk_fin_apll,
- [1] = &clk_fout_apll,
-};
-
-static struct clksrc_sources clk_src_apll = {
- .sources = clk_src_apll_list,
- .nr_sources = ARRAY_SIZE(clk_src_apll_list),
-};
-
-static struct clksrc_clk clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- .id = -1,
- },
- .sources = &clk_src_apll,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 0, .size = 1, },
-};
-
-static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_APLL_MASK;
- ratio >>= S5PC100_CLKDIV0_APLL_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_apll = {
- .name = "dout_apll",
- .id = -1,
- .parent = &clk_mout_apll.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_apll_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_ARM_MASK;
- ratio >>= S5PC100_CLKDIV0_ARM_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static unsigned long s5pc100_clk_arm_round_rate(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- u32 div;
-
- if (parent < rate)
- return rate;
-
- div = (parent / rate) - 1;
- if (div > S5PC100_CLKDIV0_ARM_MASK)
- div = S5PC100_CLKDIV0_ARM_MASK;
-
- return parent / (div + 1);
-}
-
-static int s5pc100_clk_arm_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- u32 div;
- u32 val;
-
- if (rate < parent / (S5PC100_CLKDIV0_ARM_MASK + 1))
- return -EINVAL;
-
- rate = clk_round_rate(clk, rate);
- div = clk_get_rate(clk->parent) / rate;
-
- val = __raw_readl(S5PC100_CLKDIV0);
- val &= S5PC100_CLKDIV0_ARM_MASK;
- val |= (div - 1);
- __raw_writel(val, S5PC100_CLKDIV0);
-
- return 0;
-}
-
-static struct clk clk_arm = {
- .name = "armclk",
- .id = -1,
- .parent = &clk_dout_apll,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_arm_get_rate,
- .set_rate = s5pc100_clk_arm_set_rate,
- .round_rate = s5pc100_clk_arm_round_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_D0_MASK;
- ratio >>= S5PC100_CLKDIV0_D0_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_d0_bus = {
- .name = "dout_d0_bus",
- .id = -1,
- .parent = &clk_arm,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_d0_bus_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_PCLKD0_MASK;
- ratio >>= S5PC100_CLKDIV0_PCLKD0_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_pclkd0 = {
- .name = "dout_pclkd0",
- .id = -1,
- .parent = &clk_dout_d0_bus,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_pclkd0_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_APLL2_MASK;
- ratio >>= S5PC100_CLKDIV1_APLL2_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_apll2 = {
- .name = "dout_apll2",
- .id = -1,
- .parent = &clk_mout_apll.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_apll2_get_rate,
- },
-};
-
-/* MPLL */
-static struct clk *clk_src_mpll_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &clk_fout_mpll,
-};
-
-static struct clksrc_sources clk_src_mpll = {
- .sources = clk_src_mpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- .id = -1,
- },
- .sources = &clk_src_mpll,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 4, .size = 1, },
-};
-
-static struct clk *clkset_am_list[] = {
- [0] = &clk_mout_mpll.clk,
- [1] = &clk_dout_apll2,
-};
-
-static struct clksrc_sources clk_src_am = {
- .sources = clkset_am_list,
- .nr_sources = ARRAY_SIZE(clkset_am_list),
-};
-
-static struct clksrc_clk clk_mout_am = {
- .clk = {
- .name = "mout_am",
- .id = -1,
- },
- .sources = &clk_src_am,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 16, .size = 1, },
-};
-
-static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_D1_MASK;
- ratio >>= S5PC100_CLKDIV1_D1_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_d1_bus = {
- .name = "dout_d1_bus",
- .id = -1,
- .parent = &clk_mout_am.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_d1_bus_get_rate,
- },
-};
-
-static struct clk *clkset_onenand_list[] = {
- [0] = &clk_dout_d0_bus,
- [1] = &clk_dout_d1_bus,
-};
-
-static struct clksrc_sources clk_src_onenand = {
- .sources = clkset_onenand_list,
- .nr_sources = ARRAY_SIZE(clkset_onenand_list),
-};
-
-static struct clksrc_clk clk_mout_onenand = {
- .clk = {
- .name = "mout_onenand",
- .id = -1,
- },
- .sources = &clk_src_onenand,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 24, .size = 1, },
-};
-
-static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_PCLKD1_MASK;
- ratio >>= S5PC100_CLKDIV1_PCLKD1_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_pclkd1 = {
- .name = "dout_pclkd1",
- .id = -1,
- .parent = &clk_dout_d1_bus,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_pclkd1_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
- ratio >>= S5PC100_CLKDIV1_MPLL2_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_mpll2 = {
- .name = "dout_mpll2",
- .id = -1,
- .parent = &clk_mout_am.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_mpll2_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_CAM_MASK;
- ratio >>= S5PC100_CLKDIV1_CAM_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_cam = {
- .name = "dout_cam",
- .id = -1,
- .parent = &clk_dout_mpll2,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_cam_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL_MASK;
- ratio >>= S5PC100_CLKDIV1_MPLL_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_mpll = {
- .name = "dout_mpll",
- .id = -1,
- .parent = &clk_mout_am.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_mpll_get_rate,
- },
-};
-
-/* EPLL */
-static struct clk clk_fout_epll = {
- .name = "fout_epll",
- .id = -1,
-};
-
-static struct clk *clk_src_epll_list[] = {
- [0] = &clk_fin_epll,
- [1] = &clk_fout_epll,
-};
-
-static struct clksrc_sources clk_src_epll = {
- .sources = clk_src_epll_list,
- .nr_sources = ARRAY_SIZE(clk_src_epll_list),
-};
-
-static struct clksrc_clk clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- .id = -1,
- },
- .sources = &clk_src_epll,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 8, .size = 1, },
-};
-
-/* HPLL */
-static struct clk clk_fout_hpll = {
- .name = "fout_hpll",
- .id = -1,
-};
-
-static struct clk *clk_src_hpll_list[] = {
- [0] = &clk_27m,
- [1] = &clk_fout_hpll,
-};
-
-static struct clksrc_sources clk_src_hpll = {
- .sources = clk_src_hpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_hpll_list),
-};
-
-static struct clksrc_clk clk_mout_hpll = {
- .clk = {
- .name = "mout_hpll",
- .id = -1,
- },
- .sources = &clk_src_hpll,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 12, .size = 1, },
-};
-
-/* Peripherals */
-/*
- * The peripheral clocks are all controlled via clocksource followed
- * by an optional divider and gate stage. We currently roll this into
- * one clock which hides the intermediate clock from the mux.
- *
- * Note, the JPEG clock can only be an even divider...
- *
- * The scaler and LCD clocks depend on the S5PC100 version, and also
- * have a common parent divisor so are not included here.
- */
-
-static struct clk clk_iis_cd0 = {
- .name = "iis_cdclk0",
- .id = -1,
-};
-
-static struct clk clk_iis_cd1 = {
- .name = "iis_cdclk1",
- .id = -1,
-};
-
-static struct clk clk_iis_cd2 = {
- .name = "iis_cdclk2",
- .id = -1,
-};
-
-static struct clk clk_pcm_cd0 = {
- .name = "pcm_cdclk0",
- .id = -1,
-};
-
-static struct clk clk_pcm_cd1 = {
- .name = "pcm_cdclk1",
- .id = -1,
-};
-
-static struct clk *clkset_audio0_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
- &clk_iis_cd0,
- &clk_pcm_cd0,
- &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_audio0 = {
- .sources = clkset_audio0_list,
- .nr_sources = ARRAY_SIZE(clkset_audio0_list),
-};
-
-static struct clk *clkset_spi_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll2,
- &clk_fin_epll,
- &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_spi = {
- .sources = clkset_spi_list,
- .nr_sources = ARRAY_SIZE(clkset_spi_list),
-};
-
-static struct clk *clkset_uart_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
-};
-
-static struct clksrc_sources clkset_uart = {
- .sources = clkset_uart_list,
- .nr_sources = ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_audio1_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
- &clk_iis_cd1,
- &clk_pcm_cd1,
- &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_audio1 = {
- .sources = clkset_audio1_list,
- .nr_sources = ARRAY_SIZE(clkset_audio1_list),
-};
-
-static struct clk *clkset_audio2_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
- &clk_iis_cd2,
- &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_audio2 = {
- .sources = clkset_audio2_list,
- .nr_sources = ARRAY_SIZE(clkset_audio2_list),
-};
-
-static struct clksrc_clk clksrc_audio[] = {
- {
- .clk = {
- .name = "audio-bus",
- .id = 0,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO0,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_audio0,
- .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 12, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 12, .size = 3, },
- }, {
- .clk = {
- .name = "audio-bus",
- .id = 1,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO1,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_audio1,
- .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 16, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 16, .size = 3, },
- }, {
- .clk = {
- .name = "audio-bus",
- .id = 2,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO2,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_audio2,
- .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 20, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 20, .size = 3, },
- },
-};
-
-static struct clk *clkset_spdif_list[] = {
- &clksrc_audio[0].clk,
- &clksrc_audio[1].clk,
- &clksrc_audio[2].clk,
-};
-
-static struct clksrc_sources clkset_spdif = {
- .sources = clkset_spdif_list,
- .nr_sources = ARRAY_SIZE(clkset_spdif_list),
-};
-
-static struct clk *clkset_lcd_fimc_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_mout_hpll.clk,
- &clk_vclk_54m,
-};
-
-static struct clksrc_sources clkset_lcd_fimc = {
- .sources = clkset_lcd_fimc_list,
- .nr_sources = ARRAY_SIZE(clkset_lcd_fimc_list),
-};
-
-static struct clk *clkset_mmc_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
- &clk_mout_hpll.clk ,
-};
-
-static struct clksrc_sources clkset_mmc = {
- .sources = clkset_mmc_list,
- .nr_sources = ARRAY_SIZE(clkset_mmc_list),
-};
-
-static struct clk *clkset_usbhost_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_mout_hpll.clk,
- &clk_48m,
-};
-
-static struct clksrc_sources clkset_usbhost = {
- .sources = clkset_usbhost_list,
- .nr_sources = ARRAY_SIZE(clkset_usbhost_list),
-};
-
-static struct clksrc_clk clksrc_clks[] = {
- {
- .clk = {
- .name = "spi_bus",
- .id = 0,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0,
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clkset_spi,
- .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 4, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 4, .size = 2, },
- }, {
- .clk = {
- .name = "spi_bus",
- .id = 1,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_spi,
- .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 8, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 8, .size = 2, },
- }, {
- .clk = {
- .name = "spi_bus",
- .id = 2,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_spi,
- .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 12, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 12, .size = 2, },
- }, {
- .clk = {
- .name = "uclk1",
- .id = -1,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_UART,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_uart,
- .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 0, .size = 3, },
- .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 0, .size = 1, },
- }, {
- .clk = {
- .name = "spdif",
- .id = -1,
- },
- .sources = &clkset_spdif,
- .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 24, .size = 2, },
- }, {
- .clk = {
- .name = "lcd",
- .id = -1,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_LCD,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_lcd_fimc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 12, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 12, .size = 2, },
- }, {
- .clk = {
- .name = "fimc",
- .id = 0,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC0,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_lcd_fimc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 16, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 16, .size = 2, },
- }, {
- .clk = {
- .name = "fimc",
- .id = 1,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC1,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_lcd_fimc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 20, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 20, .size = 2, },
- }, {
- .clk = {
- .name = "fimc",
- .id = 2,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC2,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_lcd_fimc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 24, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 24, .size = 2, },
- }, {
- .clk = {
- .name = "mmc_bus",
- .id = 0,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_mmc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 0, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 0, .size = 2, },
- }, {
- .clk = {
- .name = "mmc_bus",
- .id = 1,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_mmc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 4, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 4, .size = 2, },
- }, {
- .clk = {
- .name = "mmc_bus",
- .id = 2,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_mmc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 8, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 8, .size = 2, },
- }, {
- .clk = {
- .name = "usbhost",
- .id = -1,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_USBHOST,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_usbhost,
- .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 20, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 20, .size = 2, },
- }
-};
-
-/* Clock initialisation code */
-
-static struct clksrc_clk *init_parents[] = {
- &clk_mout_apll,
- &clk_mout_mpll,
- &clk_mout_am,
- &clk_mout_onenand,
- &clk_mout_epll,
- &clk_mout_hpll,
-};
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-void __init_or_cpufreq s5pc100_setup_clocks(void)
-{
- struct clk *xtal_clk;
- unsigned long xtal;
- unsigned long armclk;
- unsigned long hclkd0;
- unsigned long hclk;
- unsigned long pclkd0;
- unsigned long pclk;
- unsigned long apll, mpll, epll, hpll;
- unsigned int ptr;
- u32 clkdiv0, clkdiv1;
-
- printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
- clkdiv0 = __raw_readl(S5PC100_CLKDIV0);
- clkdiv1 = __raw_readl(S5PC100_CLKDIV1);
-
- printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", __func__, clkdiv0, clkdiv1);
-
- xtal_clk = clk_get(NULL, "xtal");
- BUG_ON(IS_ERR(xtal_clk));
-
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
- apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_APLL_CON));
- mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_MPLL_CON));
- epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_EPLL_CON));
- hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
-
- printk(KERN_INFO "S5PC100: Apll=%ld.%03ld Mhz, Mpll=%ld.%03ld Mhz"
- ", Epll=%ld.%03ld Mhz, Hpll=%ld.%03ld Mhz\n",
- print_mhz(apll), print_mhz(mpll),
- print_mhz(epll), print_mhz(hpll));
-
- armclk = apll / GET_DIV(clkdiv0, S5PC100_CLKDIV0_APLL);
- armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
- hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
- pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
- hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
- pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
-
- printk(KERN_INFO "S5PC100: ARMCLK=%ld.%03ld MHz, HCLKD0=%ld.%03ld MHz,"
- " PCLKD0=%ld.%03ld MHz\n, HCLK=%ld.%03ld MHz,"
- " PCLK=%ld.%03ld MHz\n",
- print_mhz(armclk), print_mhz(hclkd0),
- print_mhz(pclkd0), print_mhz(hclk), print_mhz(pclk));
-
- clk_fout_apll.rate = apll;
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
- clk_fout_hpll.rate = hpll;
-
- clk_h.rate = hclk;
- clk_p.rate = pclk;
- clk_f.rate = armclk;
-
- for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
- s3c_set_clksrc(init_parents[ptr], true);
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrc_audio); ptr++)
- s3c_set_clksrc(clksrc_audio + ptr, true);
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
- s3c_set_clksrc(clksrc_clks + ptr, true);
-}
-
-static struct clk *clks[] __initdata = {
- &clk_ext_xtal_mux,
- &clk_dout_apll,
- &clk_dout_d0_bus,
- &clk_dout_pclkd0,
- &clk_dout_apll2,
- &clk_mout_apll.clk,
- &clk_mout_mpll.clk,
- &clk_mout_epll.clk,
- &clk_mout_hpll.clk,
- &clk_mout_am.clk,
- &clk_dout_d1_bus,
- &clk_mout_onenand.clk,
- &clk_dout_pclkd1,
- &clk_dout_mpll2,
- &clk_dout_cam,
- &clk_dout_mpll,
- &clk_fout_epll,
- &clk_iis_cd0,
- &clk_iis_cd1,
- &clk_iis_cd2,
- &clk_pcm_cd0,
- &clk_pcm_cd1,
- &clk_arm,
-};
-
-void __init s5pc100_register_clocks(void)
-{
- struct clk *clkp;
- int ret;
- int ptr;
-
- for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
- clkp = clks[ptr];
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
- }
-
- s3c_register_clksrc(clksrc_audio, ARRAY_SIZE(clksrc_audio));
- s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
-}
--
1.6.4
next prev parent reply other threads:[~2010-05-18 10:38 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-18 10:38 (unknown), Marek Szyprowski
2010-05-18 10:38 ` No subject Marek Szyprowski
2010-05-18 10:38 ` [PATCH 01/11] drivers: serial: S5PC100 serial driver cleanup Marek Szyprowski
2010-05-18 10:38 ` Marek Szyprowski
2010-05-18 10:38 ` [PATCH 02/11] ARM: S5PC100: Use common functions for gpiolib implementation Marek Szyprowski
2010-05-18 10:38 ` Marek Szyprowski
2010-05-18 10:38 ` [PATCH 03/11] ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100 Marek Szyprowski
2010-05-18 10:38 ` Marek Szyprowski
2010-05-18 10:38 ` [PATCH 04/11] ARM: S5PC100: gpio.h cleanup Marek Szyprowski
2010-05-18 10:38 ` Marek Szyprowski
2010-05-18 10:38 ` [PATCH 05/11] ARM: S5PC100: Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100 Marek Szyprowski
2010-05-18 10:38 ` Marek Szyprowski
2010-05-18 10:38 ` [PATCH 06/11] ARM: S5PC100: Move i2c " Marek Szyprowski
2010-05-18 10:38 ` Marek Szyprowski
2010-05-18 10:38 ` [PATCH 07/11] ARM: S5PC100: Move sdhci " Marek Szyprowski
2010-05-18 10:38 ` Marek Szyprowski
2010-05-18 10:38 ` [PATCH 08/11] ARM: Samsung: move S5PC100 support from plat-s5pc1xx to plat-s5p framework Marek Szyprowski
2010-05-18 10:38 ` Marek Szyprowski
2010-05-18 10:38 ` [PATCH 09/11] ARM: S5PC100: Add support for gpio interrupt Marek Szyprowski
2010-05-18 10:38 ` Marek Szyprowski
2010-05-18 10:38 ` [PATCH 10/11] ARM: S5PC100: use common plat-s5p external interrupt code Marek Szyprowski
2010-05-18 10:38 ` Marek Szyprowski
2010-05-19 4:02 ` Ben Dooks
2010-05-19 4:02 ` Ben Dooks
2010-05-19 5:29 ` Marek Szyprowski
2010-05-19 5:29 ` Marek Szyprowski
2010-05-19 5:58 ` Ben Dooks
2010-05-19 5:58 ` Ben Dooks
2010-05-19 6:46 ` Ben Dooks
2010-05-19 6:46 ` Ben Dooks
2010-05-18 10:38 ` Marek Szyprowski [this message]
2010-05-18 10:38 ` [PATCH 11/11] ARM: remove obsolete plat-s5pc1xx directory Marek Szyprowski
2010-05-19 1:02 ` Kukjin Kim
2010-05-19 1:02 ` Kukjin Kim
2010-05-19 2:24 ` your mail Ben Dooks
2010-05-19 2:24 ` Ben Dooks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1274179129-14659-12-git-send-email-m.szyprowski@samsung.com \
--to=m.szyprowski@samsung.com \
--cc=ben-linux@fluff.org \
--cc=kgene.kim@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.