All of lore.kernel.org
 help / color / mirror / Atom feed
From: Markus Armbruster <armbru@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, kraxel@redhat.com
Subject: [Qemu-devel] [PATCH 01/13] block: Move error actions from DriveInfo to BlockDriverState
Date: Wed,  2 Jun 2010 18:55:17 +0200	[thread overview]
Message-ID: <1275497729-13120-2-git-send-email-armbru@redhat.com> (raw)
In-Reply-To: <1275497729-13120-1-git-send-email-armbru@redhat.com>

That's where they belong semantically (block device host part), even
though the actions are actually executed by guest device code.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 block.c         |   12 ++++++++++++
 block.h         |    8 ++++++++
 block_int.h     |    1 +
 blockdev.c      |   17 ++---------------
 blockdev.h      |   10 ----------
 hw/ide/core.c   |    2 +-
 hw/scsi-disk.c  |    2 +-
 hw/virtio-blk.c |    3 +--
 8 files changed, 26 insertions(+), 29 deletions(-)

diff --git a/block.c b/block.c
index cacf11b..5c2f3d9 100644
--- a/block.c
+++ b/block.c
@@ -1206,6 +1206,18 @@ int bdrv_get_translation_hint(BlockDriverState *bs)
     return bs->translation;
 }
 
+void bdrv_set_on_error(BlockDriverState *bs, BlockErrorAction on_read_error,
+                       BlockErrorAction on_write_error)
+{
+    bs->on_read_error = on_read_error;
+    bs->on_write_error = on_write_error;
+}
+
+BlockErrorAction bdrv_get_on_error(BlockDriverState *bs, int is_read)
+{
+    return is_read ? bs->on_read_error : bs->on_write_error;
+}
+
 int bdrv_is_removable(BlockDriverState *bs)
 {
     return bs->removable;
diff --git a/block.h b/block.h
index 25744b1..9ceb64d 100644
--- a/block.h
+++ b/block.h
@@ -42,6 +42,11 @@ typedef struct QEMUSnapshotInfo {
 #define BDRV_SECTOR_MASK   ~(BDRV_SECTOR_SIZE - 1)
 
 typedef enum {
+    BLOCK_ERR_REPORT, BLOCK_ERR_IGNORE, BLOCK_ERR_STOP_ENOSPC,
+    BLOCK_ERR_STOP_ANY
+} BlockErrorAction;
+
+typedef enum {
     BDRV_ACTION_REPORT, BDRV_ACTION_IGNORE, BDRV_ACTION_STOP
 } BlockMonEventAction;
 
@@ -146,6 +151,9 @@ void bdrv_get_geometry_hint(BlockDriverState *bs,
                             int *pcyls, int *pheads, int *psecs);
 int bdrv_get_type_hint(BlockDriverState *bs);
 int bdrv_get_translation_hint(BlockDriverState *bs);
+void bdrv_set_on_error(BlockDriverState *bs, BlockErrorAction on_read_error,
+                       BlockErrorAction on_write_error);
+BlockErrorAction bdrv_get_on_error(BlockDriverState *bs, int is_read);
 int bdrv_is_removable(BlockDriverState *bs);
 int bdrv_is_read_only(BlockDriverState *bs);
 int bdrv_is_sg(BlockDriverState *bs);
diff --git a/block_int.h b/block_int.h
index 1a7240c..e3bfd19 100644
--- a/block_int.h
+++ b/block_int.h
@@ -182,6 +182,7 @@ struct BlockDriverState {
        drivers. They are not used by the block driver */
     int cyls, heads, secs, translation;
     int type;
+    BlockErrorAction on_read_error, on_write_error;
     char device_name[32];
     unsigned long *dirty_bitmap;
     int64_t dirty_count;
diff --git a/blockdev.c b/blockdev.c
index bd9783a..0df16c7 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -90,19 +90,6 @@ const char *drive_get_serial(BlockDriverState *bdrv)
     return "\0";
 }
 
-BlockInterfaceErrorAction drive_get_on_error(
-    BlockDriverState *bdrv, int is_read)
-{
-    DriveInfo *dinfo;
-
-    QTAILQ_FOREACH(dinfo, &drives, next) {
-        if (dinfo->bdrv == bdrv)
-            return is_read ? dinfo->on_read_error : dinfo->on_write_error;
-    }
-
-    return is_read ? BLOCK_ERR_REPORT : BLOCK_ERR_STOP_ENOSPC;
-}
-
 static void bdrv_format_print(void *opaque, const char *name)
 {
     fprintf(stderr, " %s", name);
@@ -418,13 +405,13 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi, int *fatal_error)
     dinfo->type = type;
     dinfo->bus = bus_id;
     dinfo->unit = unit_id;
-    dinfo->on_read_error = on_read_error;
-    dinfo->on_write_error = on_write_error;
     dinfo->opts = opts;
     if (serial)
         strncpy(dinfo->serial, serial, sizeof(serial));
     QTAILQ_INSERT_TAIL(&drives, dinfo, next);
 
+    bdrv_set_on_error(dinfo->bdrv, on_read_error, on_write_error);
+
     switch(type) {
     case IF_IDE:
     case IF_SCSI:
diff --git a/blockdev.h b/blockdev.h
index dfc9de1..9e8a7fc 100644
--- a/blockdev.h
+++ b/blockdev.h
@@ -19,11 +19,6 @@ typedef enum {
     IF_COUNT
 } BlockInterfaceType;
 
-typedef enum {
-    BLOCK_ERR_REPORT, BLOCK_ERR_IGNORE, BLOCK_ERR_STOP_ENOSPC,
-    BLOCK_ERR_STOP_ANY
-} BlockInterfaceErrorAction;
-
 #define BLOCK_SERIAL_STRLEN 20
 
 typedef struct DriveInfo {
@@ -34,8 +29,6 @@ typedef struct DriveInfo {
     int bus;
     int unit;
     QemuOpts *opts;
-    BlockInterfaceErrorAction on_read_error;
-    BlockInterfaceErrorAction on_write_error;
     char serial[BLOCK_SERIAL_STRLEN + 1];
     QTAILQ_ENTRY(DriveInfo) next;
 } DriveInfo;
@@ -51,9 +44,6 @@ extern int drive_get_max_bus(BlockInterfaceType type);
 extern void drive_uninit(DriveInfo *dinfo);
 extern const char *drive_get_serial(BlockDriverState *bdrv);
 
-extern BlockInterfaceErrorAction drive_get_on_error(
-    BlockDriverState *bdrv, int is_read);
-
 extern QemuOpts *drive_add(const char *file, const char *fmt, ...);
 extern DriveInfo *drive_init(QemuOpts *arg, int default_to_scsi,
                              int *fatal_error);
diff --git a/hw/ide/core.c b/hw/ide/core.c
index 045d18d..0b3b7c2 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -481,7 +481,7 @@ void ide_dma_error(IDEState *s)
 static int ide_handle_rw_error(IDEState *s, int error, int op)
 {
     int is_read = (op & BM_STATUS_RETRY_READ);
-    BlockInterfaceErrorAction action = drive_get_on_error(s->bs, is_read);
+    BlockErrorAction action = bdrv_get_on_error(s->bs, is_read);
 
     if (action == BLOCK_ERR_IGNORE) {
         bdrv_mon_event(s->bs, BDRV_ACTION_IGNORE, is_read);
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index a9bf7d2..2b38984 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -182,7 +182,7 @@ static void scsi_read_data(SCSIDevice *d, uint32_t tag)
 static int scsi_handle_write_error(SCSIDiskReq *r, int error)
 {
     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
-    BlockInterfaceErrorAction action = drive_get_on_error(s->bs, 0);
+    BlockErrorAction action = bdrv_get_on_error(s->bs, 0);
 
     if (action == BLOCK_ERR_IGNORE) {
         bdrv_mon_event(s->bs, BDRV_ACTION_IGNORE, 0);
diff --git a/hw/virtio-blk.c b/hw/virtio-blk.c
index cdcb492..cb17afa 100644
--- a/hw/virtio-blk.c
+++ b/hw/virtio-blk.c
@@ -58,8 +58,7 @@ static void virtio_blk_req_complete(VirtIOBlockReq *req, int status)
 static int virtio_blk_handle_rw_error(VirtIOBlockReq *req, int error,
     int is_read)
 {
-    BlockInterfaceErrorAction action =
-        drive_get_on_error(req->dev->bs, is_read);
+    BlockErrorAction action = bdrv_get_on_error(req->dev->bs, is_read);
     VirtIOBlock *s = req->dev;
 
     if (action == BLOCK_ERR_IGNORE) {
-- 
1.6.6.1

  reply	other threads:[~2010-06-02 16:55 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-02 16:55 [Qemu-devel] [PATCH 00/13] New -blockdev to define a host block device Markus Armbruster
2010-06-02 16:55 ` Markus Armbruster [this message]
2010-06-02 16:55 ` [Qemu-devel] [PATCH 02/13] block: Decouple block device "commit all" from DriveInfo Markus Armbruster
2010-06-02 16:55 ` [Qemu-devel] [PATCH 03/13] monitor: Make "commit FOO" complain when FOO doesn't exist Markus Armbruster
2010-06-02 16:55 ` [Qemu-devel] [PATCH 04/13] block: New bdrv_next() Markus Armbruster
2010-06-02 16:55 ` [Qemu-devel] [PATCH 05/13] block: Decouple savevm from DriveInfo Markus Armbruster
2010-06-02 16:55 ` [Qemu-devel] [PATCH 06/13] blockdev: Give drives internal linkage Markus Armbruster
2010-06-02 16:55 ` [Qemu-devel] [PATCH 07/13] blockdev: Means to destroy blockdev only if made with drive_init() Markus Armbruster
2010-06-10 14:19   ` [Qemu-devel] " Kevin Wolf
2010-06-10 16:00     ` Markus Armbruster
2010-06-02 16:55 ` [Qemu-devel] [PATCH 08/13] qdev: Decouple qdev_prop_drive from DriveInfo Markus Armbruster
2010-06-02 19:28   ` [Qemu-devel] " Gerd Hoffmann
2010-06-04  8:22     ` Markus Armbruster
2010-06-02 16:55 ` [Qemu-devel] [PATCH 09/13] blockdev: drive_get_by_id() is no longer used, remove Markus Armbruster
2010-06-02 16:55 ` [Qemu-devel] [PATCH 10/13] qemu-option: New qemu_opts_reset() Markus Armbruster
2010-06-02 16:55 ` [Qemu-devel] [PATCH 11/13] qemu-option: New qemu_opt_next(), qemu_opt_name() Markus Armbruster
2010-06-02 16:55 ` [Qemu-devel] [PATCH 12/13] blockdev: Factor option value parsers out of drive_init() Markus Armbruster
2010-06-02 16:55 ` [Qemu-devel] [PATCH 13/13] blockdev: New -blockdev to define a host block device Markus Armbruster
2010-06-03  8:00   ` Christoph Hellwig
2010-06-04  8:23     ` Markus Armbruster
2010-06-10 15:32   ` [Qemu-devel] " Paolo Bonzini
2010-06-10 16:32     ` Markus Armbruster
2010-06-10 17:03       ` Paolo Bonzini
2010-06-14 14:46   ` [Qemu-devel] " Anthony Liguori

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1275497729-13120-2-git-send-email-armbru@redhat.com \
    --to=armbru@redhat.com \
    --cc=kraxel@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.