From: Lars-Peter Clausen <lars@metafoo.de> To: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org, linux-kernel@vger.kernel.org, Lars-Peter Clausen <lars@metafoo.de>, Mark Brown <broonie@opensource.wolfsonmicro.com>, Liam Girdwood <lrg@slimlogic.co.uk>, alsa-devel@alsa-project.org Subject: [PATCH v3] alsa: ASoC: JZ4740: Add qi_lb60 board driver Date: Sat, 19 Jun 2010 16:52:51 +0200 [thread overview] Message-ID: <1276959171-9261-1-git-send-email-lars@metafoo.de> (raw) In-Reply-To: <1276924111-11158-27-git-send-email-lars@metafoo.de> This patch adds ASoC support for the qi_lb60 board. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: alsa-devel@alsa-project.org -- Changes since v1 - Refer to AMP gpios always by their define - Do not try to set codecs format, since the set_fmt callback for the codec was dropped. Changes since v2 - The codec prefix was removed from jz4740 codec include file - This patch accidentally contained a few bits meant for ASoC JZ4740 platform support patch. Removed them. --- sound/soc/jz4740/Kconfig | 9 +++ sound/soc/jz4740/Makefile | 4 + sound/soc/jz4740/qi_lb60.c | 166 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 179 insertions(+), 0 deletions(-) create mode 100644 sound/soc/jz4740/qi_lb60.c diff --git a/sound/soc/jz4740/Kconfig b/sound/soc/jz4740/Kconfig index 27480f2..5351cba 100644 --- a/sound/soc/jz4740/Kconfig +++ b/sound/soc/jz4740/Kconfig @@ -12,3 +12,12 @@ config SND_JZ4740_SOC_I2S help Say Y if you want to use I2S protocol and I2S codec on Ingenic JZ4740 based boards. + +config SND_JZ4740_SOC_QI_LB60 + tristate "SoC Audio support for Qi LB60" + depends on SND_JZ4740_SOC && JZ4740_QI_LB60 + select SND_JZ4740_SOC_I2S + select SND_SOC_JZ4740_CODEC + help + Say Y if you want to add support for ASoC audio on the Qi LB60 board + a.k.a Qi Ben NanoNote. diff --git a/sound/soc/jz4740/Makefile b/sound/soc/jz4740/Makefile index 1be8d19..be873c1 100644 --- a/sound/soc/jz4740/Makefile +++ b/sound/soc/jz4740/Makefile @@ -7,3 +7,7 @@ snd-soc-jz4740-i2s-objs := jz4740-i2s.o obj-$(CONFIG_SND_JZ4740_SOC) += snd-soc-jz4740.o obj-$(CONFIG_SND_JZ4740_SOC_I2S) += snd-soc-jz4740-i2s.o +# Jz4740 Machine Support +snd-soc-qi-lb60-objs := qi_lb60.o + +obj-$(CONFIG_SND_JZ4740_SOC_QI_LB60) += snd-soc-qi-lb60.o diff --git a/sound/soc/jz4740/qi_lb60.c b/sound/soc/jz4740/qi_lb60.c new file mode 100644 index 0000000..f15f491 --- /dev/null +++ b/sound/soc/jz4740/qi_lb60.c @@ -0,0 +1,166 @@ +/* + * Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <linux/gpio.h> + +#include "../codecs/jz4740.h" +#include "jz4740-pcm.h" +#include "jz4740-i2s.h" + + +#define QI_LB60_SND_GPIO JZ_GPIO_PORTB(29) +#define QI_LB60_AMP_GPIO JZ_GPIO_PORTD(4) + +static int qi_lb60_spk_event(struct snd_soc_dapm_widget *widget, + struct snd_kcontrol *ctrl, int event) +{ + int on = 0; + if (event & SND_SOC_DAPM_POST_PMU) + on = 1; + else if (event & SND_SOC_DAPM_PRE_PMD) + on = 0; + + gpio_set_value(QI_LB60_SND_GPIO, on); + gpio_set_value(QI_LB60_AMP_GPIO, on); + + return 0; +} + +static const struct snd_soc_dapm_widget qi_lb60_widgets[] = { + SND_SOC_DAPM_SPK("Speaker", qi_lb60_spk_event), + SND_SOC_DAPM_MIC("Mic", NULL), +}; + +static const struct snd_soc_dapm_route qi_lb60_routes[] = { + {"Mic", NULL, "MIC"}, + {"Speaker", NULL, "LOUT"}, + {"Speaker", NULL, "ROUT"}, +}; + +#define QI_LB60_DAIFMT (SND_SOC_DAIFMT_I2S | \ + SND_SOC_DAIFMT_NB_NF | \ + SND_SOC_DAIFMT_CBM_CFM) + +static int qi_lb60_codec_init(struct snd_soc_codec *codec) +{ + int ret; + struct snd_soc_dai *cpu_dai = codec->socdev->card->dai_link->cpu_dai; + + snd_soc_dapm_nc_pin(codec, "LIN"); + snd_soc_dapm_nc_pin(codec, "RIN"); + + ret = snd_soc_dai_set_fmt(cpu_dai, QI_LB60_DAIFMT); + if (ret < 0) { + dev_err(codec->dev, "Failed to set cpu dai format: %d\n", ret); + return ret; + } + + snd_soc_dapm_new_controls(codec, qi_lb60_widgets, ARRAY_SIZE(qi_lb60_widgets)); + snd_soc_dapm_add_routes(codec, qi_lb60_routes, ARRAY_SIZE(qi_lb60_routes)); + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_dai_link qi_lb60_dai = { + .name = "jz4740", + .stream_name = "jz4740", + .cpu_dai = &jz4740_i2s_dai, + .codec_dai = &jz4740_codec_dai, + .init = qi_lb60_codec_init, +}; + +static struct snd_soc_card qi_lb60 = { + .name = "QI LB60", + .dai_link = &qi_lb60_dai, + .num_links = 1, + .platform = &jz4740_soc_platform, +}; + +static struct snd_soc_device qi_lb60_snd_devdata = { + .card = &qi_lb60, + .codec_dev = &soc_codec_dev_jz4740_codec, +}; + +static struct platform_device *qi_lb60_snd_device; + +static int __init qi_lb60_init(void) +{ + int ret; + + qi_lb60_snd_device = platform_device_alloc("soc-audio", -1); + + if (!qi_lb60_snd_device) + return -ENOMEM; + + ret = gpio_request(QI_LB60_SND_GPIO, "SND"); + if (ret) { + pr_err("qi_lb60 snd: Failed to request SND GPIO(%d): %d\n", + QI_LB60_SND_GPIO, ret); + goto err_device_put; + } + + ret = gpio_request(QI_LB60_AMP_GPIO, "AMP"); + if (ret) { + pr_err("qi_lb60 snd: Failed to request AMP GPIO(%d): %d\n", + QI_LB60_AMP_GPIO, ret); + goto err_gpio_free_snd; + } + + gpio_direction_output(QI_LB60_SND_GPIO, 0); + gpio_direction_output(QI_LB60_AMP_GPIO, 0); + + platform_set_drvdata(qi_lb60_snd_device, &qi_lb60_snd_devdata); + qi_lb60_snd_devdata.dev = &qi_lb60_snd_device->dev; + + ret = platform_device_add(qi_lb60_snd_device); + if (ret) { + pr_err("qi_lb60 snd: Failed to add snd soc device: %d\n", ret); + goto err_unset_pdata; + } + + return 0; + +err_unset_pdata: + platform_set_drvdata(qi_lb60_snd_device, NULL); +/*err_gpio_free_amp:*/ + gpio_free(QI_LB60_AMP_GPIO); +err_gpio_free_snd: + gpio_free(QI_LB60_SND_GPIO); +err_device_put: + platform_device_put(qi_lb60_snd_device); + + return ret; +} +module_init(qi_lb60_init); + +static void __exit qi_lb60_exit(void) +{ + gpio_free(QI_LB60_AMP_GPIO); + gpio_free(QI_LB60_SND_GPIO); + platform_device_unregister(qi_lb60_snd_device); +} +module_exit(qi_lb60_exit); + +MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); +MODULE_DESCRIPTION("ALSA SoC QI LB60 Audio support"); +MODULE_LICENSE("GPL v2"); -- 1.5.6.5
WARNING: multiple messages have this Message-ID (diff)
From: Lars-Peter Clausen <lars@metafoo.de> To: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org, alsa-devel@alsa-project.org, Lars-Peter Clausen <lars@metafoo.de>, Mark Brown <broonie@opensource.wolfsonmicro.com>, linux-kernel@vger.kernel.org, Liam Girdwood <lrg@slimlogic.co.uk> Subject: [PATCH v3] alsa: ASoC: JZ4740: Add qi_lb60 board driver Date: Sat, 19 Jun 2010 16:52:51 +0200 [thread overview] Message-ID: <1276959171-9261-1-git-send-email-lars@metafoo.de> (raw) In-Reply-To: <1276924111-11158-27-git-send-email-lars@metafoo.de> This patch adds ASoC support for the qi_lb60 board. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: alsa-devel@alsa-project.org -- Changes since v1 - Refer to AMP gpios always by their define - Do not try to set codecs format, since the set_fmt callback for the codec was dropped. Changes since v2 - The codec prefix was removed from jz4740 codec include file - This patch accidentally contained a few bits meant for ASoC JZ4740 platform support patch. Removed them. --- sound/soc/jz4740/Kconfig | 9 +++ sound/soc/jz4740/Makefile | 4 + sound/soc/jz4740/qi_lb60.c | 166 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 179 insertions(+), 0 deletions(-) create mode 100644 sound/soc/jz4740/qi_lb60.c diff --git a/sound/soc/jz4740/Kconfig b/sound/soc/jz4740/Kconfig index 27480f2..5351cba 100644 --- a/sound/soc/jz4740/Kconfig +++ b/sound/soc/jz4740/Kconfig @@ -12,3 +12,12 @@ config SND_JZ4740_SOC_I2S help Say Y if you want to use I2S protocol and I2S codec on Ingenic JZ4740 based boards. + +config SND_JZ4740_SOC_QI_LB60 + tristate "SoC Audio support for Qi LB60" + depends on SND_JZ4740_SOC && JZ4740_QI_LB60 + select SND_JZ4740_SOC_I2S + select SND_SOC_JZ4740_CODEC + help + Say Y if you want to add support for ASoC audio on the Qi LB60 board + a.k.a Qi Ben NanoNote. diff --git a/sound/soc/jz4740/Makefile b/sound/soc/jz4740/Makefile index 1be8d19..be873c1 100644 --- a/sound/soc/jz4740/Makefile +++ b/sound/soc/jz4740/Makefile @@ -7,3 +7,7 @@ snd-soc-jz4740-i2s-objs := jz4740-i2s.o obj-$(CONFIG_SND_JZ4740_SOC) += snd-soc-jz4740.o obj-$(CONFIG_SND_JZ4740_SOC_I2S) += snd-soc-jz4740-i2s.o +# Jz4740 Machine Support +snd-soc-qi-lb60-objs := qi_lb60.o + +obj-$(CONFIG_SND_JZ4740_SOC_QI_LB60) += snd-soc-qi-lb60.o diff --git a/sound/soc/jz4740/qi_lb60.c b/sound/soc/jz4740/qi_lb60.c new file mode 100644 index 0000000..f15f491 --- /dev/null +++ b/sound/soc/jz4740/qi_lb60.c @@ -0,0 +1,166 @@ +/* + * Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <linux/gpio.h> + +#include "../codecs/jz4740.h" +#include "jz4740-pcm.h" +#include "jz4740-i2s.h" + + +#define QI_LB60_SND_GPIO JZ_GPIO_PORTB(29) +#define QI_LB60_AMP_GPIO JZ_GPIO_PORTD(4) + +static int qi_lb60_spk_event(struct snd_soc_dapm_widget *widget, + struct snd_kcontrol *ctrl, int event) +{ + int on = 0; + if (event & SND_SOC_DAPM_POST_PMU) + on = 1; + else if (event & SND_SOC_DAPM_PRE_PMD) + on = 0; + + gpio_set_value(QI_LB60_SND_GPIO, on); + gpio_set_value(QI_LB60_AMP_GPIO, on); + + return 0; +} + +static const struct snd_soc_dapm_widget qi_lb60_widgets[] = { + SND_SOC_DAPM_SPK("Speaker", qi_lb60_spk_event), + SND_SOC_DAPM_MIC("Mic", NULL), +}; + +static const struct snd_soc_dapm_route qi_lb60_routes[] = { + {"Mic", NULL, "MIC"}, + {"Speaker", NULL, "LOUT"}, + {"Speaker", NULL, "ROUT"}, +}; + +#define QI_LB60_DAIFMT (SND_SOC_DAIFMT_I2S | \ + SND_SOC_DAIFMT_NB_NF | \ + SND_SOC_DAIFMT_CBM_CFM) + +static int qi_lb60_codec_init(struct snd_soc_codec *codec) +{ + int ret; + struct snd_soc_dai *cpu_dai = codec->socdev->card->dai_link->cpu_dai; + + snd_soc_dapm_nc_pin(codec, "LIN"); + snd_soc_dapm_nc_pin(codec, "RIN"); + + ret = snd_soc_dai_set_fmt(cpu_dai, QI_LB60_DAIFMT); + if (ret < 0) { + dev_err(codec->dev, "Failed to set cpu dai format: %d\n", ret); + return ret; + } + + snd_soc_dapm_new_controls(codec, qi_lb60_widgets, ARRAY_SIZE(qi_lb60_widgets)); + snd_soc_dapm_add_routes(codec, qi_lb60_routes, ARRAY_SIZE(qi_lb60_routes)); + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_dai_link qi_lb60_dai = { + .name = "jz4740", + .stream_name = "jz4740", + .cpu_dai = &jz4740_i2s_dai, + .codec_dai = &jz4740_codec_dai, + .init = qi_lb60_codec_init, +}; + +static struct snd_soc_card qi_lb60 = { + .name = "QI LB60", + .dai_link = &qi_lb60_dai, + .num_links = 1, + .platform = &jz4740_soc_platform, +}; + +static struct snd_soc_device qi_lb60_snd_devdata = { + .card = &qi_lb60, + .codec_dev = &soc_codec_dev_jz4740_codec, +}; + +static struct platform_device *qi_lb60_snd_device; + +static int __init qi_lb60_init(void) +{ + int ret; + + qi_lb60_snd_device = platform_device_alloc("soc-audio", -1); + + if (!qi_lb60_snd_device) + return -ENOMEM; + + ret = gpio_request(QI_LB60_SND_GPIO, "SND"); + if (ret) { + pr_err("qi_lb60 snd: Failed to request SND GPIO(%d): %d\n", + QI_LB60_SND_GPIO, ret); + goto err_device_put; + } + + ret = gpio_request(QI_LB60_AMP_GPIO, "AMP"); + if (ret) { + pr_err("qi_lb60 snd: Failed to request AMP GPIO(%d): %d\n", + QI_LB60_AMP_GPIO, ret); + goto err_gpio_free_snd; + } + + gpio_direction_output(QI_LB60_SND_GPIO, 0); + gpio_direction_output(QI_LB60_AMP_GPIO, 0); + + platform_set_drvdata(qi_lb60_snd_device, &qi_lb60_snd_devdata); + qi_lb60_snd_devdata.dev = &qi_lb60_snd_device->dev; + + ret = platform_device_add(qi_lb60_snd_device); + if (ret) { + pr_err("qi_lb60 snd: Failed to add snd soc device: %d\n", ret); + goto err_unset_pdata; + } + + return 0; + +err_unset_pdata: + platform_set_drvdata(qi_lb60_snd_device, NULL); +/*err_gpio_free_amp:*/ + gpio_free(QI_LB60_AMP_GPIO); +err_gpio_free_snd: + gpio_free(QI_LB60_SND_GPIO); +err_device_put: + platform_device_put(qi_lb60_snd_device); + + return ret; +} +module_init(qi_lb60_init); + +static void __exit qi_lb60_exit(void) +{ + gpio_free(QI_LB60_AMP_GPIO); + gpio_free(QI_LB60_SND_GPIO); + platform_device_unregister(qi_lb60_snd_device); +} +module_exit(qi_lb60_exit); + +MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); +MODULE_DESCRIPTION("ALSA SoC QI LB60 Audio support"); +MODULE_LICENSE("GPL v2"); -- 1.5.6.5
next prev parent reply other threads:[~2010-06-19 14:53 UTC|newest] Thread overview: 167+ messages / expand[flat|nested] mbox.gz Atom feed top 2010-06-19 5:08 [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip Lars-Peter Clausen 2010-06-19 5:08 ` [lm-sensors] [PATCH v2 00/26] Add support for the Ingenic JZ4740 Lars-Peter Clausen 2010-06-19 5:08 ` [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip Lars-Peter Clausen 2010-06-19 5:08 ` Lars-Peter Clausen 2010-06-19 5:08 ` [PATCH v2 01/26] MIPS: Add base support for " Lars-Peter Clausen 2010-06-19 5:08 ` [PATCH v2 02/26] MIPS: jz4740: Add IRQ handler code Lars-Peter Clausen 2010-07-17 12:08 ` [PATCH v3] " Lars-Peter Clausen 2010-06-19 5:08 ` [PATCH v2 03/26] MIPS: JZ4740: Add clock API support Lars-Peter Clausen 2010-06-28 1:24 ` [PATCH v3 " Lars-Peter Clausen 2010-07-17 12:10 ` [PATCH v4] " Lars-Peter Clausen 2010-06-19 5:08 ` [PATCH v2 04/26] MIPS: JZ4740: Add timer support Lars-Peter Clausen 2010-06-19 5:08 ` [PATCH v2 05/26] MIPS: JZ4740: Add clocksource/clockevent support Lars-Peter Clausen 2010-06-19 5:08 ` [PATCH v2 06/26] MIPS: JZ4740: Add power-management and system reset support Lars-Peter Clausen 2010-06-19 5:08 ` [PATCH v2 07/26] MIPS: JZ4740: Add setup code Lars-Peter Clausen 2010-06-19 5:08 ` [PATCH v2 08/26] MIPS: JZ4740: Add gpio support Lars-Peter Clausen 2010-07-17 12:11 ` [PATCH v3] " Lars-Peter Clausen 2010-06-19 5:08 ` [PATCH v2 09/26] MIPS: JZ4740: Add DMA support Lars-Peter Clausen 2010-06-19 5:08 ` [PATCH v2 10/26] MIPS: JZ4740: Add PWM support Lars-Peter Clausen 2010-06-28 1:23 ` [PATCH v3 " Lars-Peter Clausen 2010-07-17 12:12 ` [PATCH v4] " Lars-Peter Clausen 2010-06-19 5:08 ` [PATCH v2 11/26] MIPS: JZ4740: Add serial support Lars-Peter Clausen 2010-06-19 5:08 ` [PATCH v2 12/26] MIPS: JZ4740: Add prom support Lars-Peter Clausen 2010-06-19 5:08 ` [PATCH v2 13/26] MIPS: JZ4740: Add platform devices Lars-Peter Clausen 2010-07-17 12:13 ` [PATCH v3] " Lars-Peter Clausen 2010-06-19 5:08 ` [PATCH v2 14/26] MIPS: JZ4740: Add Kbuild files Lars-Peter Clausen 2010-06-19 5:08 ` [PATCH v2 15/26] RTC: Add JZ4740 RTC driver Lars-Peter Clausen 2010-06-19 10:43 ` Marek Vasut 2010-06-19 13:05 ` Lars-Peter Clausen 2010-06-19 13:37 ` Wan ZongShun 2010-06-19 13:53 ` Lars-Peter Clausen 2010-06-19 14:36 ` Wan ZongShun 2010-06-19 14:04 ` Marek Vasut 2010-06-19 17:42 ` Lars-Peter Clausen 2010-06-19 17:53 ` Geert Uytterhoeven 2010-06-19 19:29 ` [PATCH v3] " Lars-Peter Clausen 2010-06-20 1:13 ` [rtc-linux] " Wan ZongShun 2010-06-20 1:23 ` Lars-Peter Clausen 2010-06-20 1:30 ` Wan ZongShun 2010-06-22 5:53 ` Alessandro Zummo 2010-06-19 5:08 ` [PATCH v2 16/26] fbdev: Add JZ4740 framebuffer driver Lars-Peter Clausen 2010-06-19 5:08 ` Lars-Peter Clausen 2010-07-04 22:27 ` Lars-Peter Clausen 2010-07-04 22:27 ` Lars-Peter Clausen 2010-07-07 23:41 ` Andrew Morton 2010-07-07 23:41 ` Andrew Morton 2010-07-08 13:28 ` Lars-Peter Clausen 2010-07-08 13:28 ` Lars-Peter Clausen 2010-07-08 16:46 ` Andrew Morton 2010-07-08 16:46 ` Andrew Morton 2010-07-09 1:26 ` Jaya Kumar 2010-07-09 1:26 ` Jaya Kumar 2010-07-09 15:31 ` Lars-Peter Clausen 2010-07-09 15:31 ` Lars-Peter Clausen 2010-07-17 12:14 ` [PATCH v3] " Lars-Peter Clausen 2010-07-17 12:14 ` Lars-Peter Clausen 2010-06-19 5:08 ` [PATCH v2 17/26] MTD: Nand: Add JZ4740 NAND driver Lars-Peter Clausen 2010-06-19 5:08 ` Lars-Peter Clausen 2010-07-04 22:35 ` [PATCH v2 17/26] MTD: Nand: Add JZ4740 NAND Lars-Peter Clausen 2010-07-08 6:06 ` [PATCH v2 17/26] MTD: Nand: Add JZ4740 NAND driver Artem Bityutskiy 2010-07-08 6:06 ` Artem Bityutskiy 2010-07-08 13:20 ` Lars-Peter Clausen 2010-07-08 13:20 ` Lars-Peter Clausen 2010-07-08 13:19 ` Artem Bityutskiy 2010-07-08 13:19 ` Artem Bityutskiy 2010-07-08 14:02 ` Lars-Peter Clausen 2010-07-08 14:02 ` Lars-Peter Clausen 2010-07-08 14:14 ` Artem Bityutskiy 2010-07-08 14:14 ` Artem Bityutskiy 2010-07-17 12:15 ` [PATCH v3] " Lars-Peter Clausen 2010-07-17 12:15 ` Lars-Peter Clausen 2010-07-18 16:54 ` Artem Bityutskiy 2010-07-18 16:54 ` Artem Bityutskiy 2010-07-18 17:02 ` Lars-Peter Clausen 2010-07-18 17:02 ` Lars-Peter Clausen 2010-06-19 5:08 ` [PATCH v2 18/26] MMC: Add JZ4740 mmc driver Lars-Peter Clausen 2010-06-19 14:46 ` Matt Fleming 2010-06-19 14:46 ` Matt Fleming 2010-06-19 14:46 ` Matt Fleming 2010-06-19 15:29 ` Lars-Peter Clausen 2010-06-28 1:20 ` [PATCH v3] " Lars-Peter Clausen 2010-06-29 20:17 ` Matt Fleming 2010-06-29 20:17 ` Matt Fleming 2010-06-29 20:17 ` Matt Fleming 2010-07-01 15:47 ` Lars-Peter Clausen 2010-06-30 20:55 ` Andrew Morton 2010-07-01 15:45 ` Lars-Peter Clausen 2010-07-12 21:33 ` [PATCH v4] " Lars-Peter Clausen 2010-07-12 21:41 ` Randy Dunlap 2010-07-12 22:07 ` Lars-Peter Clausen 2010-07-12 22:20 ` [PATCH v5] " Lars-Peter Clausen 2010-07-12 22:45 ` Joe Perches 2010-07-12 23:45 ` Lars-Peter Clausen 2010-07-15 21:06 ` [PATCH v6] " Lars-Peter Clausen 2010-07-15 21:16 ` Andrew Morton 2010-07-15 21:37 ` Lars-Peter Clausen 2010-06-19 5:08 ` [PATCH v2 19/26] USB: Add JZ4740 ohci support Lars-Peter Clausen 2010-06-19 17:17 ` Greg KH 2010-06-19 5:08 ` [PATCH v2 20/26] alsa: ASoC: Add JZ4740 codec driver Lars-Peter Clausen 2010-06-19 5:08 ` Lars-Peter Clausen 2010-06-19 14:49 ` [PATCH v3] " Lars-Peter Clausen 2010-06-19 14:49 ` Lars-Peter Clausen 2010-06-20 13:11 ` Mark Brown 2010-06-20 13:11 ` Mark Brown 2010-06-21 22:46 ` [PATCH v4] " Lars-Peter Clausen 2010-06-21 22:46 ` Lars-Peter Clausen 2010-06-22 10:12 ` Liam Girdwood 2010-06-22 10:12 ` Liam Girdwood 2010-06-22 23:12 ` Mark Brown 2010-06-22 23:12 ` Mark Brown 2010-06-19 5:08 ` [PATCH v2 21/26] alsa: ASoC: Add JZ4740 ASoC support Lars-Peter Clausen 2010-06-19 5:08 ` Lars-Peter Clausen 2010-06-19 14:50 ` [PATCH v3] " Lars-Peter Clausen 2010-06-19 14:50 ` Lars-Peter Clausen 2010-06-19 5:08 ` [PATCH v2 22/26] MFD: Add JZ4740 ADC driver Lars-Peter Clausen 2010-07-04 22:47 ` Lars-Peter Clausen 2010-07-05 14:53 ` Samuel Ortiz 2010-07-05 15:43 ` Lars-Peter Clausen 2010-07-05 15:53 ` Samuel Ortiz 2010-07-12 1:48 ` [PATCH v3] " Lars-Peter Clausen 2010-07-14 9:19 ` Samuel Ortiz 2010-06-19 5:08 ` [PATCH v2 23/26] hwmon: " Lars-Peter Clausen 2010-06-19 5:08 ` [lm-sensors] " Lars-Peter Clausen 2010-06-19 8:36 ` Jean Delvare 2010-06-19 8:36 ` Jean Delvare 2010-06-19 8:36 ` Jean Delvare 2010-06-19 12:58 ` Lars-Peter Clausen 2010-06-19 12:58 ` Lars-Peter Clausen 2010-06-19 14:47 ` [PATCH v3] " Lars-Peter Clausen 2010-06-19 14:47 ` [lm-sensors] " Lars-Peter Clausen 2010-06-19 16:24 ` Jean Delvare 2010-06-19 16:24 ` Jean Delvare 2010-06-19 17:59 ` Lars-Peter Clausen 2010-06-19 17:59 ` Lars-Peter Clausen 2010-06-19 19:32 ` [PATCH v4] " Lars-Peter Clausen 2010-06-19 19:32 ` [lm-sensors] " Lars-Peter Clausen 2010-06-20 6:32 ` Jean Delvare 2010-06-20 6:32 ` Jean Delvare 2010-06-20 6:32 ` Jean Delvare 2010-06-19 5:08 ` [PATCH v2 24/26] power: Add JZ4740 battery driver Lars-Peter Clausen 2010-06-27 1:58 ` Lars-Peter Clausen 2010-06-28 11:43 ` Anton Vorontsov 2010-06-19 5:08 ` [PATCH v2 25/26] MIPS: JZ4740: Add qi_lb60 board support Lars-Peter Clausen 2010-07-17 12:16 ` [PATCH v3] " Lars-Peter Clausen 2010-06-19 5:08 ` [PATCH v2 26/26] alsa: ASoC: JZ4740: Add qi_lb60 board driver Lars-Peter Clausen 2010-06-19 5:08 ` Lars-Peter Clausen 2010-06-19 14:52 ` Lars-Peter Clausen [this message] 2010-06-19 14:52 ` [PATCH v3] " Lars-Peter Clausen 2010-06-20 9:26 ` [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip Thomas Bogendoerfer 2010-06-20 9:26 ` [lm-sensors] [PATCH v2 00/26] Add support for the Ingenic Thomas Bogendoerfer 2010-06-20 9:26 ` [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip Thomas Bogendoerfer 2010-06-20 9:26 ` Thomas Bogendoerfer 2010-06-20 9:26 ` [PATCH v2 00/26] Add support for the Ingenic JZ4740 Thomas Bogendoerfer 2010-06-20 14:31 ` [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip Lars-Peter Clausen 2010-06-20 14:31 ` Lars-Peter Clausen 2010-06-20 16:34 ` Thomas Bogendoerfer 2010-06-20 16:49 ` Lars-Peter Clausen 2010-06-20 17:01 ` Thomas Bogendoerfer 2010-06-20 17:57 ` Florian Fainelli 2010-06-20 18:30 ` Lars-Peter Clausen 2010-06-21 2:56 ` Xiangfu Liu 2010-06-21 2:56 ` [lm-sensors] [PATCH v2 00/26] Add support for the Ingenic Xiangfu Liu 2010-06-21 2:56 ` [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip Xiangfu Liu 2010-06-21 2:56 ` Xiangfu Liu 2010-06-19 14:51 [PATCH v3] alsa: ASoC: JZ4740: Add qi_lb60 board driver 1276924111-11158-27-git-send-email-lars 2010-06-22 10:02 ` Liam Girdwood 2010-06-22 10:02 ` Liam Girdwood 2010-06-22 10:02 ` Liam Girdwood
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1276959171-9261-1-git-send-email-lars@metafoo.de \ --to=lars@metafoo.de \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@opensource.wolfsonmicro.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mips@linux-mips.org \ --cc=lrg@slimlogic.co.uk \ --cc=ralf@linux-mips.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.