From: Anatolij Gustschin <agust@denx.de> To: linuxppc-dev@ozlabs.org Cc: linux-fbdev@vger.kernel.org, Wolfgang Denk <wd@denx.de>, Detlev Zundel <dzu@denx.de>, devicetree-discuss@lists.ozlabs.org, Anatolij Gustschin <agust@denx.de> Subject: [PATCH v4 0/5] Rework MPC5121 DIU support (for 2.6.36) Date: Fri, 23 Jul 2010 16:00:34 +0200 [thread overview] Message-ID: <1279893639-24333-1-git-send-email-agust@denx.de> (raw) Support for MPC5121 DIU in mainline kernel is currently brocken. The intention of this patch series is to provide working 5121 DIU support in v2.6.36. This patch series rework DIU support patches submitted previously. Comments to the previos patch series have been addressed, not related changes are dropped and some changes are split out to separate patches to simplify review. Furthermore a patch has been added to support setting display mode using EDID block in the device tree. v4 series is rebased to apply on current tree. Timur did some testing of patches from previous version to ensure that these do not break DIU support for MPC8610 HPCD. He then has send his Acked-by, so I added it to the related patches. The first patch is changed to provide another complete workaround to the observed issue as suggested by Freescale technical support. Anatolij Gustschin (5): fsl-diu-fb: fix issue with re-enabling DIU area descriptor fsl-diu-fb: move fsl-diu-fb.h to include/linux powerpc/mpc5121: shared DIU framebuffer support powerpc: doc/dts-bindings: update doc of FSL DIU bindings fsl-diu-fb: Support setting display mode using EDID Documentation/powerpc/dts-bindings/fsl/diu.txt | 20 ++- arch/powerpc/include/asm/mpc5121.h | 32 +++ arch/powerpc/platforms/512x/mpc5121_ads.c | 2 + arch/powerpc/platforms/512x/mpc5121_generic.c | 2 + arch/powerpc/platforms/512x/mpc512x.h | 2 + arch/powerpc/platforms/512x/mpc512x_shared.c | 284 ++++++++++++++++++++++++ arch/powerpc/sysdev/fsl_soc.h | 1 + drivers/video/Kconfig | 1 + drivers/video/fsl-diu-fb.c | 137 ++++++++++-- {drivers/video => include/linux}/fsl-diu-fb.h | 0 10 files changed, 455 insertions(+), 26 deletions(-) rename {drivers/video => include/linux}/fsl-diu-fb.h (100%)
WARNING: multiple messages have this Message-ID (diff)
From: Anatolij Gustschin <agust@denx.de> To: linuxppc-dev@ozlabs.org Cc: linux-fbdev@vger.kernel.org, Wolfgang Denk <wd@denx.de>, Detlev Zundel <dzu@denx.de>, devicetree-discuss@lists.ozlabs.org, Anatolij Gustschin <agust@denx.de> Subject: [PATCH v4 0/5] Rework MPC5121 DIU support (for 2.6.36) Date: Fri, 23 Jul 2010 14:00:34 +0000 [thread overview] Message-ID: <1279893639-24333-1-git-send-email-agust@denx.de> (raw) Support for MPC5121 DIU in mainline kernel is currently brocken. The intention of this patch series is to provide working 5121 DIU support in v2.6.36. This patch series rework DIU support patches submitted previously. Comments to the previos patch series have been addressed, not related changes are dropped and some changes are split out to separate patches to simplify review. Furthermore a patch has been added to support setting display mode using EDID block in the device tree. v4 series is rebased to apply on current tree. Timur did some testing of patches from previous version to ensure that these do not break DIU support for MPC8610 HPCD. He then has send his Acked-by, so I added it to the related patches. The first patch is changed to provide another complete workaround to the observed issue as suggested by Freescale technical support. Anatolij Gustschin (5): fsl-diu-fb: fix issue with re-enabling DIU area descriptor fsl-diu-fb: move fsl-diu-fb.h to include/linux powerpc/mpc5121: shared DIU framebuffer support powerpc: doc/dts-bindings: update doc of FSL DIU bindings fsl-diu-fb: Support setting display mode using EDID Documentation/powerpc/dts-bindings/fsl/diu.txt | 20 ++- arch/powerpc/include/asm/mpc5121.h | 32 +++ arch/powerpc/platforms/512x/mpc5121_ads.c | 2 + arch/powerpc/platforms/512x/mpc5121_generic.c | 2 + arch/powerpc/platforms/512x/mpc512x.h | 2 + arch/powerpc/platforms/512x/mpc512x_shared.c | 284 ++++++++++++++++++++++++ arch/powerpc/sysdev/fsl_soc.h | 1 + drivers/video/Kconfig | 1 + drivers/video/fsl-diu-fb.c | 137 ++++++++++-- {drivers/video => include/linux}/fsl-diu-fb.h | 0 10 files changed, 455 insertions(+), 26 deletions(-) rename {drivers/video => include/linux}/fsl-diu-fb.h (100%)
next reply other threads:[~2010-07-23 14:00 UTC|newest] Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top 2010-07-23 14:00 Anatolij Gustschin [this message] 2010-07-23 14:00 ` [PATCH v4 0/5] Rework MPC5121 DIU support (for 2.6.36) Anatolij Gustschin 2010-07-23 14:00 ` [PATCH v4 1/5] fsl-diu-fb: fix issue with re-enabling DIU area descriptor Anatolij Gustschin 2010-07-23 14:00 ` Anatolij Gustschin 2010-07-28 7:02 ` Grant Likely 2010-07-28 7:02 ` Grant Likely 2010-07-28 7:02 ` [PATCH v4 1/5] fsl-diu-fb: fix issue with re-enabling DIU area Grant Likely [not found] ` <AANLkTikkLVCxU4ZC_nmUhKTQogUNeQzxOX6KqgZcxiYr-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2010-07-28 7:56 ` [PATCH v4 1/5] fsl-diu-fb: fix issue with re-enabling DIU area descriptor Anatolij Gustschin 2010-07-28 7:56 ` Anatolij Gustschin 2010-07-28 7:56 ` [PATCH v4 1/5] fsl-diu-fb: fix issue with re-enabling DIU area Anatolij Gustschin [not found] ` <AANLkTikkLVCxU4ZC_nmUhKTQogUNeQzxOX6KqgZcxiYr__2540.83384429595$1280300644$gmane$org@mail.gmail.com> 2010-07-29 11:48 ` [PATCH v4 1/5] fsl-diu-fb: fix issue with re-enabling DIU area descriptor Detlev Zundel 2010-07-23 14:00 ` [PATCH v4 2/5] fsl-diu-fb: move fsl-diu-fb.h to include/linux Anatolij Gustschin 2010-07-23 14:00 ` Anatolij Gustschin 2010-07-23 14:00 ` [PATCH v4 3/5] powerpc/mpc5121: shared DIU framebuffer support Anatolij Gustschin 2010-07-23 14:00 ` Anatolij Gustschin 2011-12-15 17:27 ` Tabi Timur-B04825 2011-12-15 21:26 ` Anatolij Gustschin 2011-12-16 18:24 ` Timur Tabi 2011-12-16 22:59 ` Anatolij Gustschin 2011-12-16 23:00 ` Timur Tabi 2010-07-23 14:00 ` [PATCH v4 4/5] powerpc: doc/dts-bindings: update doc of FSL DIU bindings Anatolij Gustschin 2010-07-23 14:00 ` Anatolij Gustschin 2010-07-23 14:00 ` [PATCH v4 5/5] fsl-diu-fb: Support setting display mode using EDID Anatolij Gustschin 2010-07-23 14:00 ` Anatolij Gustschin [not found] ` <1279893639-24333-6-git-send-email-agust-ynQEQJNshbs@public.gmane.org> 2010-12-16 16:47 ` Timur Tabi 2010-12-16 16:47 ` Timur Tabi 2010-12-16 16:47 ` Timur Tabi [not found] ` <AANLkTin-TL5_TKnyHYtZdixosfqpkPNoarSTC+K4tTUb-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2010-12-16 16:53 ` Grant Likely 2010-12-16 16:53 ` Grant Likely 2010-12-16 16:53 ` Grant Likely 2010-12-16 16:55 ` Timur Tabi 2010-12-16 16:55 ` [PATCH v4 5/5] fsl-diu-fb: Support setting display mode using Timur Tabi [not found] ` <4D0A446E.5020600-KZfg59tc24xl57MIdRCFDg@public.gmane.org> 2010-12-16 17:06 ` [PATCH v4 5/5] fsl-diu-fb: Support setting display mode using EDID Grant Likely 2010-12-16 17:06 ` Grant Likely 2010-12-16 17:06 ` Grant Likely 2010-12-16 17:28 ` Timur Tabi 2010-12-16 17:28 ` [PATCH v4 5/5] fsl-diu-fb: Support setting display mode using Timur Tabi 2010-12-16 17:42 ` [PATCH v4 5/5] fsl-diu-fb: Support setting display mode using EDID Grant Likely 2010-12-16 17:42 ` Grant Likely 2010-12-16 17:42 ` Grant Likely 2010-12-16 17:42 ` Anatolij Gustschin 2010-12-16 17:42 ` [PATCH v4 5/5] fsl-diu-fb: Support setting display mode using Anatolij Gustschin
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1279893639-24333-1-git-send-email-agust@denx.de \ --to=agust@denx.de \ --cc=devicetree-discuss@lists.ozlabs.org \ --cc=dzu@denx.de \ --cc=linux-fbdev@vger.kernel.org \ --cc=linuxppc-dev@ozlabs.org \ --cc=wd@denx.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.