* [RFC] Bluetooth: Option to enable power management from host
@ 2010-08-11 4:46 suraj Sumangala
0 siblings, 0 replies; only message in thread
From: suraj Sumangala @ 2010-08-11 4:46 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Jothikumar.Mothilal, suraj Sumangala
This provides a new option to enable advanced power management from
Host. This option by default will be disabled for existing devices.
---
tools/hciattach.8 | 12 +++++++
tools/hciattach.c | 88 ++++++++++++++++++++++++++++++++++++++---------------
2 files changed, 75 insertions(+), 25 deletions(-)
diff --git a/tools/hciattach.8 b/tools/hciattach.8
index 9bd1538..1375905 100644
--- a/tools/hciattach.8
+++ b/tools/hciattach.8
@@ -122,7 +122,19 @@ the serial link (
set by default. To force no flow control use
.B noflow
instead.
+.TP
+.I sleep
+If the keyword
+.I sleep
+is appended to the list of options then power management is enabled
+on the controller. All above mentioned device types have
+.B nosleep
+set by default. To enable this feature use
+.B sleep
+instead.
+Note: This option will only be valid for hardware which support
+this feature.
.TP
.I bdaddr
The
diff --git a/tools/hciattach.c b/tools/hciattach.c
index 81aea7b..8616899 100644
--- a/tools/hciattach.c
+++ b/tools/hciattach.c
@@ -63,12 +63,15 @@ struct uart_t {
int init_speed;
int speed;
int flags;
+ int pm;
char *bdaddr;
int (*init) (int fd, struct uart_t *u, struct termios *ti);
int (*post) (int fd, struct uart_t *u, struct termios *ti);
};
#define FLOW_CTL 0x0001
+#define ENABLE_PM 1
+#define DISABLE_PM 0
static volatile sig_atomic_t __io_canceled = 0;
@@ -1006,72 +1009,100 @@ static int bcm2035(int fd, struct uart_t *u, struct termios *ti)
}
struct uart_t uart[] = {
- { "any", 0x0000, 0x0000, HCI_UART_H4, 115200, 115200, FLOW_CTL, NULL, NULL },
- { "ericsson", 0x0000, 0x0000, HCI_UART_H4, 57600, 115200, FLOW_CTL, NULL, ericsson },
- { "digi", 0x0000, 0x0000, HCI_UART_H4, 9600, 115200, FLOW_CTL, NULL, digi },
+ { "any", 0x0000, 0x0000, HCI_UART_H4, 115200, 115200,
+ FLOW_CTL, DISABLE_PM, NULL, NULL },
- { "bcsp", 0x0000, 0x0000, HCI_UART_BCSP, 115200, 115200, 0, NULL, bcsp },
+ { "ericsson", 0x0000, 0x0000, HCI_UART_H4, 57600, 115200,
+ FLOW_CTL, DISABLE_PM, NULL, ericsson },
+
+ { "digi", 0x0000, 0x0000, HCI_UART_H4, 9600, 115200,
+ FLOW_CTL, DISABLE_PM, NULL, digi },
+
+ { "bcsp", 0x0000, 0x0000, HCI_UART_BCSP, 115200, 115200,
+ 0, DISABLE_PM, NULL, bcsp },
/* Xircom PCMCIA cards: Credit Card Adapter and Real Port Adapter */
- { "xircom", 0x0105, 0x080a, HCI_UART_H4, 115200, 115200, FLOW_CTL, NULL, NULL },
+ { "xircom", 0x0105, 0x080a, HCI_UART_H4, 115200, 115200,
+ FLOW_CTL, DISABLE_PM, NULL, NULL },
/* CSR Casira serial adapter or BrainBoxes serial dongle (BL642) */
- { "csr", 0x0000, 0x0000, HCI_UART_H4, 115200, 115200, FLOW_CTL, NULL, csr },
+ { "csr", 0x0000, 0x0000, HCI_UART_H4, 115200, 115200,
+ FLOW_CTL, DISABLE_PM, NULL, csr },
/* BrainBoxes PCMCIA card (BL620) */
- { "bboxes", 0x0160, 0x0002, HCI_UART_H4, 115200, 460800, FLOW_CTL, NULL, csr },
+ { "bboxes", 0x0160, 0x0002, HCI_UART_H4, 115200, 460800,
+ FLOW_CTL, DISABLE_PM, NULL, csr },
/* Silicon Wave kits */
- { "swave", 0x0000, 0x0000, HCI_UART_H4, 115200, 115200, FLOW_CTL, NULL, swave },
+ { "swave", 0x0000, 0x0000, HCI_UART_H4, 115200, 115200,
+ FLOW_CTL, DISABLE_PM, NULL, swave },
/* Texas Instruments Bluelink (BRF) modules */
- { "texas", 0x0000, 0x0000, HCI_UART_LL, 115200, 115200, FLOW_CTL, NULL, texas, texas2 },
- { "texasalt", 0x0000, 0x0000, HCI_UART_LL, 115200, 115200, FLOW_CTL, NULL, texasalt, NULL },
+ { "texas", 0x0000, 0x0000, HCI_UART_LL, 115200, 115200,
+ FLOW_CTL, DISABLE_PM, NULL, texas, texas2 },
+
+ { "texasalt", 0x0000, 0x0000, HCI_UART_LL, 115200, 115200,
+ FLOW_CTL, DISABLE_PM, NULL, texasalt, NULL },
/* ST Microelectronics minikits based on STLC2410/STLC2415 */
- { "st", 0x0000, 0x0000, HCI_UART_H4, 57600, 115200, FLOW_CTL, NULL, st },
+ { "st", 0x0000, 0x0000, HCI_UART_H4, 57600, 115200,
+ FLOW_CTL, DISABLE_PM, NULL, st },
/* ST Microelectronics minikits based on STLC2500 */
- { "stlc2500", 0x0000, 0x0000, HCI_UART_H4, 115200, 115200, FLOW_CTL, "00:80:E1:00:AB:BA", stlc2500 },
+ { "stlc2500", 0x0000, 0x0000, HCI_UART_H4, 115200, 115200,
+ FLOW_CTL, DISABLE_PM, "00:80:E1:00:AB:BA", stlc2500 },
/* Philips generic Ericsson IP core based */
- { "philips", 0x0000, 0x0000, HCI_UART_H4, 115200, 115200, FLOW_CTL, NULL, NULL },
+ { "philips", 0x0000, 0x0000, HCI_UART_H4, 115200, 115200,
+ FLOW_CTL, DISABLE_PM, NULL, NULL },
/* Philips BGB2xx Module */
- { "bgb2xx", 0x0000, 0x0000, HCI_UART_H4, 115200, 115200, FLOW_CTL, "BD:B2:10:00:AB:BA", bgb2xx },
+ { "bgb2xx", 0x0000, 0x0000, HCI_UART_H4, 115200, 115200,
+ FLOW_CTL, DISABLE_PM, "BD:B2:10:00:AB:BA", bgb2xx },
/* Sphinx Electronics PICO Card */
- { "picocard", 0x025e, 0x1000, HCI_UART_H4, 115200, 115200, FLOW_CTL, NULL, NULL },
+ { "picocard", 0x025e, 0x1000, HCI_UART_H4, 115200, 115200,
+ FLOW_CTL, DISABLE_PM, NULL, NULL },
/* Inventel BlueBird Module */
- { "inventel", 0x0000, 0x0000, HCI_UART_H4, 115200, 115200, FLOW_CTL, NULL, NULL },
+ { "inventel", 0x0000, 0x0000, HCI_UART_H4, 115200, 115200,
+ FLOW_CTL, DISABLE_PM, NULL, NULL },
/* COM One Platinium Bluetooth PC Card */
- { "comone", 0xffff, 0x0101, HCI_UART_BCSP, 115200, 115200, 0, NULL, bcsp },
+ { "comone", 0xffff, 0x0101, HCI_UART_BCSP, 115200, 115200,
+ 0, DISABLE_PM, NULL, bcsp },
/* TDK Bluetooth PC Card and IBM Bluetooth PC Card II */
- { "tdk", 0x0105, 0x4254, HCI_UART_BCSP, 115200, 115200, 0, NULL, bcsp },
+ { "tdk", 0x0105, 0x4254, HCI_UART_BCSP, 115200, 115200,
+ 0, DISABLE_PM, NULL, bcsp },
/* Socket Bluetooth CF Card (Rev G) */
- { "socket", 0x0104, 0x0096, HCI_UART_BCSP, 230400, 230400, 0, NULL, bcsp },
+ { "socket", 0x0104, 0x0096, HCI_UART_BCSP, 230400, 230400,
+ 0, DISABLE_PM, NULL, bcsp },
/* 3Com Bluetooth Card (Version 3.0) */
- { "3com", 0x0101, 0x0041, HCI_UART_H4, 115200, 115200, FLOW_CTL, NULL, csr },
+ { "3com", 0x0101, 0x0041, HCI_UART_H4, 115200, 115200,
+ FLOW_CTL, DISABLE_PM, NULL, csr },
/* AmbiCom BT2000C Bluetooth PC/CF Card */
- { "bt2000c", 0x022d, 0x2000, HCI_UART_H4, 57600, 460800, FLOW_CTL, NULL, csr },
+ { "bt2000c", 0x022d, 0x2000, HCI_UART_H4, 57600, 460800,
+ FLOW_CTL, DISABLE_PM, NULL, csr },
/* Zoom Bluetooth PCMCIA Card */
- { "zoom", 0x0279, 0x950b, HCI_UART_BCSP, 115200, 115200, 0, NULL, bcsp },
+ { "zoom", 0x0279, 0x950b, HCI_UART_BCSP, 115200, 115200,
+ 0, DISABLE_PM, NULL, bcsp },
/* Sitecom CN-504 PCMCIA Card */
- { "sitecom", 0x0279, 0x950b, HCI_UART_BCSP, 115200, 115200, 0, NULL, bcsp },
+ { "sitecom", 0x0279, 0x950b, HCI_UART_BCSP, 115200, 115200,
+ 0, DISABLE_PM, NULL, bcsp },
/* Billionton PCBTC1 PCMCIA Card */
- { "billionton", 0x0279, 0x950b, HCI_UART_BCSP, 115200, 115200, 0, NULL, bcsp },
+ { "billionton", 0x0279, 0x950b, HCI_UART_BCSP, 115200, 115200,
+ 0, DISABLE_PM, NULL, bcsp },
/* Broadcom BCM2035 */
- { "bcm2035", 0x0A5C, 0x2035, HCI_UART_H4, 115200, 460800, FLOW_CTL, NULL, bcm2035 },
+ { "bcm2035", 0x0A5C, 0x2035, HCI_UART_H4, 115200, 460800,
+ FLOW_CTL, DISABLE_PM, NULL, bcm2035 },
{ NULL, 0 }
};
@@ -1290,6 +1321,13 @@ int main(int argc, char *argv[])
break;
case 4:
+ if (!strcmp("sleep", argv[optind]))
+ u->pm = ENABLE_PM;
+ else
+ u->pm = DISABLE_PM;
+ break;
+
+ case 5:
u->bdaddr = argv[optind];
break;
}
--
1.7.0.4
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2010-08-11 4:46 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-08-11 4:46 [RFC] Bluetooth: Option to enable power management from host suraj Sumangala
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.