* Re: iwlagn fails to associate on 2.6.36-rc2
@ 2010-08-24 22:47 lance lassetter
2010-08-25 7:35 ` Johannes Berg
0 siblings, 1 reply; 13+ messages in thread
From: lance lassetter @ 2010-08-24 22:47 UTC (permalink / raw)
To: johannes; +Cc: linux-wireless
> On Mon, 2010-08-23 at 20:03 -0500, lance lassetter wrote:
>
> > Don't know if this is related but upon resume of a tuxonice kernel from
> > hibernation wireless is deauthenticated. The router software runs 2.4
> > linux kernel. The dmesg output is:
> >
> > [ 3372.060428] wlan0: deauthenticated from 68:7f:74:26:dd:2e (Reason: 7)
> > [ 3372.065039] cfg80211: All devices are disconnected, going to restore
> > regulatory settings
> > [ 3372.065043] cfg80211: Restoring regulatory settings
> > [ 3372.065047] cfg80211: Calling CRDA to update world regulatory domain
>
> That's unrelated, and perfectly normal.
>
> johannes
Johannes,
Hi,
I have a few questions:
First is why this didn't happen with kernel 2.6.30? Connection was automatically up upon thaw being complete.
Second is how to restore wireless connectivity upon resume from hibernation without having to manually restart the network?
Lance
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: iwlagn fails to associate on 2.6.36-rc2
2010-08-24 22:47 iwlagn fails to associate on 2.6.36-rc2 lance lassetter
@ 2010-08-25 7:35 ` Johannes Berg
2010-08-28 0:03 ` lance lassetter
0 siblings, 1 reply; 13+ messages in thread
From: Johannes Berg @ 2010-08-25 7:35 UTC (permalink / raw)
To: lance lassetter; +Cc: linux-wireless
On Tue, 2010-08-24 at 17:47 -0500, lance lassetter wrote:
> First is why this didn't happen with kernel 2.6.30? Connection was
> automatically up upon thaw being complete.
I have no idea. 2.6.30 is very long ago.
> Second is how to restore wireless connectivity upon resume from
> hibernation without having to manually restart the network?
Run wpa_supplicant.
johannes
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: iwlagn fails to associate on 2.6.36-rc2
2010-08-25 7:35 ` Johannes Berg
@ 2010-08-28 0:03 ` lance lassetter
0 siblings, 0 replies; 13+ messages in thread
From: lance lassetter @ 2010-08-28 0:03 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless
On Wed, 2010-08-25 at 09:35 +0200, Johannes Berg wrote:
> On Tue, 2010-08-24 at 17:47 -0500, lance lassetter wrote:
>
> > First is why this didn't happen with kernel 2.6.30? Connection was
> > automatically up upon thaw being complete.
>
> I have no idea. 2.6.30 is very long ago.
>
> > Second is how to restore wireless connectivity upon resume from
> > hibernation without having to manually restart the network?
>
> Run wpa_supplicant.
works like a charm, thanks Johannes. If you need anything tested,
please let me know.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: iwlagn fails to associate on 2.6.36-rc2
2010-08-24 1:03 ` lance lassetter
@ 2010-08-24 7:51 ` Johannes Berg
0 siblings, 0 replies; 13+ messages in thread
From: Johannes Berg @ 2010-08-24 7:51 UTC (permalink / raw)
To: lance lassetter; +Cc: Guy, Wey-Yi, Christoph Hellwig, linux-wireless
On Mon, 2010-08-23 at 20:03 -0500, lance lassetter wrote:
> Don't know if this is related but upon resume of a tuxonice kernel from
> hibernation wireless is deauthenticated. The router software runs 2.4
> linux kernel. The dmesg output is:
>
> [ 3372.060428] wlan0: deauthenticated from 68:7f:74:26:dd:2e (Reason: 7)
> [ 3372.065039] cfg80211: All devices are disconnected, going to restore
> regulatory settings
> [ 3372.065043] cfg80211: Restoring regulatory settings
> [ 3372.065047] cfg80211: Calling CRDA to update world regulatory domain
That's unrelated, and perfectly normal.
johannes
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: iwlagn fails to associate on 2.6.36-rc2
2010-08-23 17:00 ` Guy, Wey-Yi
2010-08-23 19:32 ` Christoph Hellwig
@ 2010-08-24 1:03 ` lance lassetter
2010-08-24 7:51 ` Johannes Berg
1 sibling, 1 reply; 13+ messages in thread
From: lance lassetter @ 2010-08-24 1:03 UTC (permalink / raw)
To: Guy, Wey-Yi; +Cc: Christoph Hellwig, linux-wireless
On Mon, 2010-08-23 at 10:00 -0700, Guy, Wey-Yi wrote:
> On Mon, 2010-08-23 at 09:32 -0700, Christoph Hellwig wrote:
> > On Mon, Aug 23, 2010 at 07:42:13AM -0700, Guy, Wey-Yi wrote:
> > > Turn both iwlagn anf mac80211 debugging on when you compile kernel and
> > > use debug=0x43fff when you load the iwlagn module
> >
> > Here's a log for the sequence of:
> >
> > modprobe iwlagn debug=0x43fff
> > ifup wlan0
> >
> > until dhclient times out.
>
> Hi Christoph,
>
> there is a important RTS/CTS patch
> 94597ab23ea10b3bdcba534be00a9f7b35791c07
>
> http://git.kernel.org/?p=linux/kernel/git/iwlwifi/iwlwifi-2.6.git;a=commit;h=94597ab23ea10b3bdcba534be00a9f7b35791c07
>
>
> please apply and try
>
> Thanks
> Wey
Hi,
Don't know if this is related but upon resume of a tuxonice kernel from
hibernation wireless is deauthenticated. The router software runs 2.4
linux kernel. The dmesg output is:
[ 3372.060428] wlan0: deauthenticated from 68:7f:74:26:dd:2e (Reason: 7)
[ 3372.065039] cfg80211: All devices are disconnected, going to restore
regulatory settings
[ 3372.065043] cfg80211: Restoring regulatory settings
[ 3372.065047] cfg80211: Calling CRDA to update world regulatory domain
I tried upgrading the router software to 2.6 kernel but due to wireless
stability issues on the router end I had to downgrade.
The kernel on the client is 2.6.35-tuxonice, the OS is Gentoo. The only
kernel that I've tried that doesn't do this is 2.6.30-tuxonice-r11.
Anything greater than that is affected.
Lance
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: iwlagn fails to associate on 2.6.36-rc2
2010-08-23 19:32 ` Christoph Hellwig
@ 2010-08-23 19:34 ` Guy, Wey-Yi
0 siblings, 0 replies; 13+ messages in thread
From: Guy, Wey-Yi @ 2010-08-23 19:34 UTC (permalink / raw)
To: Christoph Hellwig; +Cc: linux-wireless
On Mon, 2010-08-23 at 12:32 -0700, Christoph Hellwig wrote:
> On Mon, Aug 23, 2010 at 10:00:45AM -0700, Guy, Wey-Yi wrote:
> > Hi Christoph,
> >
> > there is a important RTS/CTS patch
> > 94597ab23ea10b3bdcba534be00a9f7b35791c07
> >
> > http://git.kernel.org/?p=linux/kernel/git/iwlwifi/iwlwifi-2.6.git;a=commit;h=94597ab23ea10b3bdcba534be00a9f7b35791c07
>
> That is already included in the kernel I'm testing.
ok, just hope I got lucky :-)
Thanks
Wey
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: iwlagn fails to associate on 2.6.36-rc2
2010-08-23 17:00 ` Guy, Wey-Yi
@ 2010-08-23 19:32 ` Christoph Hellwig
2010-08-23 19:34 ` Guy, Wey-Yi
2010-08-24 1:03 ` lance lassetter
1 sibling, 1 reply; 13+ messages in thread
From: Christoph Hellwig @ 2010-08-23 19:32 UTC (permalink / raw)
To: Guy, Wey-Yi; +Cc: Christoph Hellwig, linux-wireless
On Mon, Aug 23, 2010 at 10:00:45AM -0700, Guy, Wey-Yi wrote:
> Hi Christoph,
>
> there is a important RTS/CTS patch
> 94597ab23ea10b3bdcba534be00a9f7b35791c07
>
> http://git.kernel.org/?p=linux/kernel/git/iwlwifi/iwlwifi-2.6.git;a=commit;h=94597ab23ea10b3bdcba534be00a9f7b35791c07
That is already included in the kernel I'm testing.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: iwlagn fails to associate on 2.6.36-rc2
2010-08-23 16:32 ` Christoph Hellwig
@ 2010-08-23 17:00 ` Guy, Wey-Yi
2010-08-23 19:32 ` Christoph Hellwig
2010-08-24 1:03 ` lance lassetter
0 siblings, 2 replies; 13+ messages in thread
From: Guy, Wey-Yi @ 2010-08-23 17:00 UTC (permalink / raw)
To: Christoph Hellwig; +Cc: linux-wireless
On Mon, 2010-08-23 at 09:32 -0700, Christoph Hellwig wrote:
> On Mon, Aug 23, 2010 at 07:42:13AM -0700, Guy, Wey-Yi wrote:
> > Turn both iwlagn anf mac80211 debugging on when you compile kernel and
> > use debug=0x43fff when you load the iwlagn module
>
> Here's a log for the sequence of:
>
> modprobe iwlagn debug=0x43fff
> ifup wlan0
>
> until dhclient times out.
Hi Christoph,
there is a important RTS/CTS patch
94597ab23ea10b3bdcba534be00a9f7b35791c07
http://git.kernel.org/?p=linux/kernel/git/iwlwifi/iwlwifi-2.6.git;a=commit;h=94597ab23ea10b3bdcba534be00a9f7b35791c07
please apply and try
Thanks
Wey
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: iwlagn fails to associate on 2.6.36-rc2
2010-08-23 14:42 ` Guy, Wey-Yi
@ 2010-08-23 16:32 ` Christoph Hellwig
2010-08-23 17:00 ` Guy, Wey-Yi
0 siblings, 1 reply; 13+ messages in thread
From: Christoph Hellwig @ 2010-08-23 16:32 UTC (permalink / raw)
To: Guy, Wey-Yi; +Cc: Christoph Hellwig, linux-wireless
[-- Attachment #1: Type: text/plain, Size: 292 bytes --]
On Mon, Aug 23, 2010 at 07:42:13AM -0700, Guy, Wey-Yi wrote:
> Turn both iwlagn anf mac80211 debugging on when you compile kernel and
> use debug=0x43fff when you load the iwlagn module
Here's a log for the sequence of:
modprobe iwlagn debug=0x43fff
ifup wlan0
until dhclient times out.
[-- Attachment #2: iwlagn-dmesg --]
[-- Type: text/plain, Size: 78143 bytes --]
[ 112.069209] iwlagn 0000:03:00.0: PCI INT A disabled
[ 116.890742] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 116.890745] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 116.890799] ieee80211 phy1: U iwl_pci_probe *** LOAD DRIVER ***
[ 116.890840] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 116.890872] iwlagn 0000:03:00.0: setting latency timer to 64
[ 116.891609] ieee80211 phy1: U iwl_pci_probe pci_resource_len = 0x00002000
[ 116.891611] ieee80211 phy1: U iwl_pci_probe pci_resource_base = ffffc90018874000
[ 116.891644] iwlagn 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 116.891652] ieee80211 phy1: U iwl_prepare_card_hw iwl_prepare_card_hw enter
[ 116.891664] ieee80211 phy1: U iwl_set_hw_ready hardware ready
[ 116.891673] ieee80211 phy1: U iwl_eeprom_init NVM size = 2048
[ 116.891788] ieee80211 phy1: U iwl_apm_init Init card's basic functions
[ 116.891848] ieee80211 phy1: U iwl_apm_init L1 Enabled; Disabling L0S
[ 116.892250] ieee80211 phy1: U iwlcore_eeprom_verify_signature EEPROM signature=0x00000004
[ 116.911173] ieee80211 phy1: U iwl_eeprom_init NVM Type: EEPROM, version: 0x11e
[ 116.911178] ieee80211 phy1: U iwl_apm_stop Stop card, put in low power state
[ 116.911185] ieee80211 phy1: U iwl_apm_stop_master stop master
[ 116.911223] iwlagn 0000:03:00.0: device EEPROM VER=0x11e, CALIB=0x4
[ 116.911225] ieee80211 phy1: U iwl_pci_probe MAC address: 00:21:5d:b3:d0:88
[ 116.911228] ieee80211 phy1: U iwl_set_rxon_chain rx_chain=0x2406 active=2 idle=1
[ 116.911230] ieee80211 phy1: U iwl_init_channel_map Initializing regulatory info from EEPROM
[ 116.911232] ieee80211 phy1: U iwl_init_channel_map Parsing data for 56 channels.
[ 116.911576] ieee80211 phy1: U iwl_init_channel_map Ch. 1 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[ 116.911580] ieee80211 phy1: U iwl_init_channel_map Ch. 2 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[ 116.911583] ieee80211 phy1: U iwl_init_channel_map Ch. 3 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[ 116.911586] ieee80211 phy1: U iwl_init_channel_map Ch. 4 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[ 116.911589] ieee80211 phy1: U iwl_init_channel_map Ch. 5 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[ 116.911592] ieee80211 phy1: U iwl_init_channel_map Ch. 6 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[ 116.911594] ieee80211 phy1: U iwl_init_channel_map Ch. 7 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[ 116.911597] ieee80211 phy1: U iwl_init_channel_map Ch. 8 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[ 116.911600] ieee80211 phy1: U iwl_init_channel_map Ch. 9 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[ 116.911603] ieee80211 phy1: U iwl_init_channel_map Ch. 10 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[ 116.911606] ieee80211 phy1: U iwl_init_channel_map Ch. 11 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[ 116.911609] ieee80211 phy1: U iwl_init_channel_map Ch. 12 [2.4GHz] VALID WIDE (0x61 15dBm): Ad-Hoc not supported
[ 116.911612] ieee80211 phy1: U iwl_init_channel_map Ch. 13 [2.4GHz] VALID WIDE (0x61 15dBm): Ad-Hoc not supported
[ 116.911614] ieee80211 phy1: U iwl_init_channel_map Ch. 14 Flags 0 [2.4GHz] - No traffic
[ 116.911616] ieee80211 phy1: U iwl_init_channel_map Ch. 183 Flags 0 [5.2GHz] - No traffic
[ 116.911619] ieee80211 phy1: U iwl_init_channel_map Ch. 184 Flags 0 [5.2GHz] - No traffic
[ 116.911621] ieee80211 phy1: U iwl_init_channel_map Ch. 185 Flags 0 [5.2GHz] - No traffic
[ 116.911623] ieee80211 phy1: U iwl_init_channel_map Ch. 187 Flags 0 [5.2GHz] - No traffic
[ 116.911624] ieee80211 phy1: U iwl_init_channel_map Ch. 188 Flags 0 [5.2GHz] - No traffic
[ 116.911626] ieee80211 phy1: U iwl_init_channel_map Ch. 189 Flags 0 [5.2GHz] - No traffic
[ 116.911628] ieee80211 phy1: U iwl_init_channel_map Ch. 192 Flags 0 [5.2GHz] - No traffic
[ 116.911630] ieee80211 phy1: U iwl_init_channel_map Ch. 196 Flags 0 [5.2GHz] - No traffic
[ 116.911632] ieee80211 phy1: U iwl_init_channel_map Ch. 7 Flags 0 [5.2GHz] - No traffic
[ 116.911634] ieee80211 phy1: U iwl_init_channel_map Ch. 8 Flags 0 [5.2GHz] - No traffic
[ 116.911636] ieee80211 phy1: U iwl_init_channel_map Ch. 11 Flags 0 [5.2GHz] - No traffic
[ 116.911638] ieee80211 phy1: U iwl_init_channel_map Ch. 12 Flags 0 [5.2GHz] - No traffic
[ 116.911640] ieee80211 phy1: U iwl_init_channel_map Ch. 16 Flags 0 [5.2GHz] - No traffic
[ 116.911642] ieee80211 phy1: U iwl_init_channel_map Ch. 34 Flags 0 [5.2GHz] - No traffic
[ 116.911645] ieee80211 phy1: U iwl_init_channel_map Ch. 36 [5.2GHz] VALID WIDE DFS (0xe1 15dBm): Ad-Hoc not supported
[ 116.911647] ieee80211 phy1: U iwl_init_channel_map Ch. 38 Flags 0 [5.2GHz] - No traffic
[ 116.911650] ieee80211 phy1: U iwl_init_channel_map Ch. 40 [5.2GHz] VALID WIDE DFS (0xe1 15dBm): Ad-Hoc not supported
[ 116.911652] ieee80211 phy1: U iwl_init_channel_map Ch. 42 Flags 0 [5.2GHz] - No traffic
[ 116.911655] ieee80211 phy1: U iwl_init_channel_map Ch. 44 [5.2GHz] VALID WIDE DFS (0xe1 15dBm): Ad-Hoc not supported
[ 116.911657] ieee80211 phy1: U iwl_init_channel_map Ch. 46 Flags 0 [5.2GHz] - No traffic
[ 116.911659] ieee80211 phy1: U iwl_init_channel_map Ch. 48 [5.2GHz] VALID WIDE DFS (0xe1 15dBm): Ad-Hoc not supported
[ 116.911662] ieee80211 phy1: U iwl_init_channel_map Ch. 52 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911665] ieee80211 phy1: U iwl_init_channel_map Ch. 56 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911668] ieee80211 phy1: U iwl_init_channel_map Ch. 60 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911671] ieee80211 phy1: U iwl_init_channel_map Ch. 64 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911674] ieee80211 phy1: U iwl_init_channel_map Ch. 100 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911676] ieee80211 phy1: U iwl_init_channel_map Ch. 104 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911679] ieee80211 phy1: U iwl_init_channel_map Ch. 108 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911682] ieee80211 phy1: U iwl_init_channel_map Ch. 112 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911685] ieee80211 phy1: U iwl_init_channel_map Ch. 116 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911688] ieee80211 phy1: U iwl_init_channel_map Ch. 120 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911691] ieee80211 phy1: U iwl_init_channel_map Ch. 124 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911693] ieee80211 phy1: U iwl_init_channel_map Ch. 128 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911696] ieee80211 phy1: U iwl_init_channel_map Ch. 132 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911699] ieee80211 phy1: U iwl_init_channel_map Ch. 136 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911702] ieee80211 phy1: U iwl_init_channel_map Ch. 140 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911704] ieee80211 phy1: U iwl_init_channel_map Ch. 145 Flags 0 [5.2GHz] - No traffic
[ 116.911707] ieee80211 phy1: U iwl_init_channel_map Ch. 149 [5.2GHz] VALID WIDE DFS (0xa1 15dBm): Ad-Hoc not supported
[ 116.911710] ieee80211 phy1: U iwl_init_channel_map Ch. 153 [5.2GHz] VALID WIDE DFS (0xa1 15dBm): Ad-Hoc not supported
[ 116.911712] ieee80211 phy1: U iwl_init_channel_map Ch. 157 [5.2GHz] VALID WIDE DFS (0xa1 15dBm): Ad-Hoc not supported
[ 116.911715] ieee80211 phy1: U iwl_init_channel_map Ch. 161 [5.2GHz] VALID WIDE DFS (0xa1 15dBm): Ad-Hoc not supported
[ 116.911718] ieee80211 phy1: U iwl_init_channel_map Ch. 165 [5.2GHz] VALID WIDE DFS (0xa1 15dBm): Ad-Hoc not supported
[ 116.911721] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 1 [2.4GHz] IBSS ACTIVE WIDE (0x6f 10dBm): Ad-Hoc supported
[ 116.911724] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 5 [2.4GHz] IBSS ACTIVE WIDE (0x6f 10dBm): Ad-Hoc supported
[ 116.911727] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 2 [2.4GHz] IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[ 116.911729] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 6 [2.4GHz] IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[ 116.911732] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 3 [2.4GHz] IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[ 116.911735] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[ 116.911738] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 4 [2.4GHz] IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[ 116.911740] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 8 [2.4GHz] IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[ 116.911743] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 5 [2.4GHz] IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[ 116.911746] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 9 [2.4GHz] IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[ 116.911749] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 6 [2.4GHz] IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[ 116.911751] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 10 [2.4GHz] IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[ 116.911754] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x6f 13dBm): Ad-Hoc supported
[ 116.911757] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] IBSS ACTIVE WIDE (0x6f 13dBm): Ad-Hoc supported
[ 116.911760] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 36 [5.2GHz] WIDE DFS (0xe1 14dBm): Ad-Hoc not supported
[ 116.911762] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 40 [5.2GHz] WIDE DFS (0xe1 14dBm): Ad-Hoc not supported
[ 116.911765] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 44 [5.2GHz] WIDE DFS (0xe1 15dBm): Ad-Hoc not supported
[ 116.911768] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 48 [5.2GHz] WIDE DFS (0xe1 15dBm): Ad-Hoc not supported
[ 116.911771] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 52 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911773] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 56 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911776] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 60 [5.2GHz] RADAR WIDE (0x31 14dBm): Ad-Hoc not supported
[ 116.911779] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 64 [5.2GHz] RADAR WIDE (0x31 14dBm): Ad-Hoc not supported
[ 116.911782] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 100 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911785] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 104 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911787] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 108 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911790] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 112 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911793] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 116 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911796] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 120 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911799] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 124 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911802] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 128 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911804] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 132 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911807] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 136 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[ 116.911810] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 149 [5.2GHz] WIDE (0x61 15dBm): Ad-Hoc not supported
[ 116.911813] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 153 [5.2GHz] WIDE (0x61 15dBm): Ad-Hoc not supported
[ 116.911816] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 157 [5.2GHz] WIDE (0x61 15dBm): Ad-Hoc not supported
[ 116.911818] ieee80211 phy1: U iwl_mod_ht40_chan_info HT40 Ch. 161 [5.2GHz] WIDE (0x61 15dBm): Ad-Hoc not supported
[ 116.911826] ieee80211 phy1: U iwlcore_init_geos Channel 1 Freq=2412[2.4GHz] valid flag=0x20
[ 116.911829] ieee80211 phy1: U iwlcore_init_geos Channel 2 Freq=2417[2.4GHz] valid flag=0x20
[ 116.911831] ieee80211 phy1: U iwlcore_init_geos Channel 3 Freq=2422[2.4GHz] valid flag=0x20
[ 116.911833] ieee80211 phy1: U iwlcore_init_geos Channel 4 Freq=2427[2.4GHz] valid flag=0x20
[ 116.911835] ieee80211 phy1: U iwlcore_init_geos Channel 5 Freq=2432[2.4GHz] valid flag=0x0
[ 116.911838] ieee80211 phy1: U iwlcore_init_geos Channel 6 Freq=2437[2.4GHz] valid flag=0x0
[ 116.911840] ieee80211 phy1: U iwlcore_init_geos Channel 7 Freq=2442[2.4GHz] valid flag=0x0
[ 116.911842] ieee80211 phy1: U iwlcore_init_geos Channel 8 Freq=2447[2.4GHz] valid flag=0x10
[ 116.911844] ieee80211 phy1: U iwlcore_init_geos Channel 9 Freq=2452[2.4GHz] valid flag=0x10
[ 116.911847] ieee80211 phy1: U iwlcore_init_geos Channel 10 Freq=2457[2.4GHz] valid flag=0x10
[ 116.911849] ieee80211 phy1: U iwlcore_init_geos Channel 11 Freq=2462[2.4GHz] valid flag=0x10
[ 116.911851] ieee80211 phy1: U iwlcore_init_geos Channel 12 Freq=2467[2.4GHz] valid flag=0x36
[ 116.911854] ieee80211 phy1: U iwlcore_init_geos Channel 13 Freq=2472[2.4GHz] valid flag=0x36
[ 116.911856] ieee80211 phy1: U iwlcore_init_geos Channel 36 Freq=5180[5.2GHz] valid flag=0x26
[ 116.911858] ieee80211 phy1: U iwlcore_init_geos Channel 40 Freq=5200[5.2GHz] valid flag=0x16
[ 116.911860] ieee80211 phy1: U iwlcore_init_geos Channel 44 Freq=5220[5.2GHz] valid flag=0x26
[ 116.911863] ieee80211 phy1: U iwlcore_init_geos Channel 48 Freq=5240[5.2GHz] valid flag=0x16
[ 116.911865] ieee80211 phy1: U iwlcore_init_geos Channel 52 Freq=5260[5.2GHz] valid flag=0x2E
[ 116.911867] ieee80211 phy1: U iwlcore_init_geos Channel 56 Freq=5280[5.2GHz] valid flag=0x1E
[ 116.911869] ieee80211 phy1: U iwlcore_init_geos Channel 60 Freq=5300[5.2GHz] valid flag=0x2E
[ 116.911871] ieee80211 phy1: U iwlcore_init_geos Channel 64 Freq=5320[5.2GHz] valid flag=0x1E
[ 116.911874] ieee80211 phy1: U iwlcore_init_geos Channel 100 Freq=5500[5.2GHz] valid flag=0x2E
[ 116.911876] ieee80211 phy1: U iwlcore_init_geos Channel 104 Freq=5520[5.2GHz] valid flag=0x1E
[ 116.911878] ieee80211 phy1: U iwlcore_init_geos Channel 108 Freq=5540[5.2GHz] valid flag=0x2E
[ 116.911881] ieee80211 phy1: U iwlcore_init_geos Channel 112 Freq=5560[5.2GHz] valid flag=0x1E
[ 116.911883] ieee80211 phy1: U iwlcore_init_geos Channel 116 Freq=5580[5.2GHz] valid flag=0x2E
[ 116.911885] ieee80211 phy1: U iwlcore_init_geos Channel 120 Freq=5600[5.2GHz] valid flag=0x1E
[ 116.911887] ieee80211 phy1: U iwlcore_init_geos Channel 124 Freq=5620[5.2GHz] valid flag=0x2E
[ 116.911890] ieee80211 phy1: U iwlcore_init_geos Channel 128 Freq=5640[5.2GHz] valid flag=0x1E
[ 116.911892] ieee80211 phy1: U iwlcore_init_geos Channel 132 Freq=5660[5.2GHz] valid flag=0x2E
[ 116.911894] ieee80211 phy1: U iwlcore_init_geos Channel 136 Freq=5680[5.2GHz] valid flag=0x1E
[ 116.911896] ieee80211 phy1: U iwlcore_init_geos Channel 140 Freq=5700[5.2GHz] valid flag=0x3E
[ 116.911899] ieee80211 phy1: U iwlcore_init_geos Channel 149 Freq=5745[5.2GHz] valid flag=0x26
[ 116.911901] ieee80211 phy1: U iwlcore_init_geos Channel 153 Freq=5765[5.2GHz] valid flag=0x16
[ 116.911903] ieee80211 phy1: U iwlcore_init_geos Channel 157 Freq=5785[5.2GHz] valid flag=0x26
[ 116.911906] ieee80211 phy1: U iwlcore_init_geos Channel 161 Freq=5805[5.2GHz] valid flag=0x16
[ 116.911908] ieee80211 phy1: U iwlcore_init_geos Channel 165 Freq=5825[5.2GHz] valid flag=0x36
[ 116.911910] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 116.912066] iwlagn 0000:03:00.0: irq 49 for MSI/MSI-X
[ 116.913655] ieee80211 phy1: U iwl_tt_initialize Initialize Thermal Throttling
[ 116.913657] ieee80211 phy1: U iwl_tt_initialize Legacy Thermal Throttling
[ 116.913659] ieee80211 phy1: U iwl_request_firmware attempting to load firmware 'iwlwifi-5000-2.ucode'
[ 116.921518] ieee80211 phy1: U iwl_ucode_callback Loaded firmware file 'iwlwifi-5000-2.ucode' (353240 bytes).
[ 116.921522] iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
[ 116.921524] ieee80211 phy1: U iwl_ucode_callback f/w package hdr ucode version raw = 0x818020c
[ 116.921526] ieee80211 phy1: U iwl_ucode_callback f/w package hdr runtime inst size = 130700
[ 116.921528] ieee80211 phy1: U iwl_ucode_callback f/w package hdr runtime data size = 49152
[ 116.921530] ieee80211 phy1: U iwl_ucode_callback f/w package hdr init inst size = 124212
[ 116.921532] ieee80211 phy1: U iwl_ucode_callback f/w package hdr init data size = 49152
[ 116.921534] ieee80211 phy1: U iwl_ucode_callback f/w package hdr boot inst size = 0
[ 116.921673] ieee80211 phy1: U iwl_ucode_callback Copying (but not loading) uCode instr len 130700
[ 116.921692] ieee80211 phy1: U iwl_ucode_callback uCode instr buf vaddr = 0xffff880125700000, paddr = 0x25700000
[ 116.921694] ieee80211 phy1: U iwl_ucode_callback Copying (but not loading) uCode data len 49152
[ 116.921715] ieee80211 phy1: U iwl_ucode_callback Copying (but not loading) init instr len 124212
[ 116.921742] ieee80211 phy1: U iwl_ucode_callback Copying (but not loading) init data len 49152
[ 116.921750] ieee80211 phy1: U iwl_ucode_callback Copying (but not loading) boot instr len 0
[ 116.922401] phy1: Selected rate control algorithm 'iwl-agn-rs'
[ 130.686519] ieee80211 phy1: U iwl_mac_start enter
[ 130.686524] ieee80211 phy1: U iwl_prep_station Add STA to driver ID 15: ff:ff:ff:ff:ff:ff
[ 130.686527] ieee80211 phy1: U iwl_prepare_card_hw iwl_prepare_card_hw enter
[ 130.686556] ieee80211 phy1: U iwl_set_hw_ready hardware ready
[ 130.686566] ieee80211 phy1: U iwl_apm_init Init card's basic functions
[ 130.686605] ieee80211 phy1: U iwl_apm_init L1 Enabled; Disabling L0S
[ 130.688323] ieee80211 phy1: U iwlagn_load_ucode Init ucode found. Loading init ucode...
[ 130.688385] ieee80211 phy1: U iwlagn_load_section INST uCode section being loaded...
[ 130.691993] ieee80211 phy1: U iwlagn_load_section DATA uCode section being loaded...
[ 130.694679] ieee80211 phy1: U iwlagn_load_ucode Init ucode load complete.
[ 130.694682] ieee80211 phy1: U __iwl_up iwlagn is coming up
[ 130.694684] ieee80211 phy1: U iwl_mac_start Start UP work done.
[ 130.702936] ieee80211 phy1: I iwl_rx_reply_alive Alive ucode status 0x00000001 revision 0x1 0x9
[ 130.702940] ieee80211 phy1: I iwl_rx_reply_alive Initialization Alive received.
[ 130.707026] ieee80211 phy1: U iwlcore_verify_inst_sparse ucode inst image size is 0
[ 130.707029] ieee80211 phy1: U iwl_verify_ucode Bootstrap uCode is good in inst SRAM
[ 130.708016] ieee80211 phy1: U iwlagn_tx_queue_set_status Activate AC/CMD Queue 0 on FIFO 3
[ 130.708016] ieee80211 phy1: U iwlagn_tx_queue_set_status Activate AC/CMD Queue 1 on FIFO 2
[ 130.708016] ieee80211 phy1: U iwlagn_tx_queue_set_status Activate AC/CMD Queue 2 on FIFO 1
[ 130.708016] ieee80211 phy1: U iwlagn_tx_queue_set_status Activate AC/CMD Queue 3 on FIFO 0
[ 130.708016] ieee80211 phy1: U iwlagn_tx_queue_set_status Activate AC/CMD Queue 4 on FIFO 7
[ 130.709519] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command COEX_PRIORITY_TABLE_CMD
[ 130.709522] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command COEX_PRIORITY_TABLE_CMD
[ 130.709527] ieee80211 phy1: U iwl_enqueue_hcmd Sending command COEX_PRIORITY_TABLE_CMD (#5a), seq: 0x0400, 72 bytes at 0[0]:4
[ 130.709562] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command COEX_PRIORITY_TABLE_CMD
[ 130.709712] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
[ 130.709714] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
[ 130.709717] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x4401, 12 bytes at 1[32]:4
[ 130.709774] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
[ 130.709783] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command CALIBRATION_CFG_CMD
[ 130.709785] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command CALIBRATION_CFG_CMD
[ 130.709788] ieee80211 phy1: U iwl_enqueue_hcmd Sending command CALIBRATION_CFG_CMD (#65), seq: 0x0402, 96 bytes at 2[2]:4
[ 130.709827] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command CALIBRATION_CFG_CMD
[ 130.785241] ieee80211 phy1: I iwlagn_rx_calib_complete Init. calibration is completed, restarting fw.
[ 130.785252] ieee80211 phy1: U __iwl_down iwlagn is going down
[ 130.785254] ieee80211 phy1: U iwl_clear_ucode_stations Clearing ucode stations in driver
[ 130.785256] ieee80211 phy1: U iwl_clear_ucode_stations No active stations found to be cleared
[ 130.785493] ieee80211 phy1: U iwl_apm_stop Stop card, put in low power state
[ 130.785501] ieee80211 phy1: U iwl_apm_stop_master stop master
[ 130.785539] ieee80211 phy1: U iwl_clear_free_frames 0 frames on pre-allocated heap on clear.
[ 130.785544] ieee80211 phy1: U iwl_prep_station Add STA to driver ID 15: ff:ff:ff:ff:ff:ff
[ 130.785547] ieee80211 phy1: U iwl_prepare_card_hw iwl_prepare_card_hw enter
[ 130.785575] ieee80211 phy1: U iwl_set_hw_ready hardware ready
[ 130.785584] ieee80211 phy1: U iwl_apm_init Init card's basic functions
[ 130.785623] ieee80211 phy1: U iwl_apm_init L1 Enabled; Disabling L0S
[ 130.786515] ieee80211 phy1: U iwlagn_load_ucode Init ucode not found, or already loaded. Loading runtime ucode...
[ 130.786584] ieee80211 phy1: U iwlagn_load_section INST uCode section being loaded...
[ 130.790257] ieee80211 phy1: U iwlagn_load_section DATA uCode section being loaded...
[ 130.792944] ieee80211 phy1: U iwlagn_load_ucode Runtime ucode load complete.
[ 130.792947] ieee80211 phy1: U __iwl_up iwlagn is coming up
[ 130.801201] ieee80211 phy1: I iwl_rx_reply_alive Alive ucode status 0x00000001 revision 0x1 0x0
[ 130.801203] ieee80211 phy1: I iwl_rx_reply_alive Runtime Alive received.
[ 130.806026] ieee80211 phy1: U iwl_alive_start Runtime Alive received.
[ 130.806032] ieee80211 phy1: U iwlcore_verify_inst_sparse ucode inst image size is 0
[ 130.806035] ieee80211 phy1: U iwl_verify_ucode Bootstrap uCode is good in inst SRAM
[ 130.807009] ieee80211 phy1: U iwlagn_tx_queue_set_status Activate AC/CMD Queue 0 on FIFO 3
[ 130.807009] ieee80211 phy1: U iwlagn_tx_queue_set_status Activate AC/CMD Queue 1 on FIFO 2
[ 130.807009] ieee80211 phy1: U iwlagn_tx_queue_set_status Activate AC/CMD Queue 2 on FIFO 1
[ 130.807009] ieee80211 phy1: U iwlagn_tx_queue_set_status Activate AC/CMD Queue 3 on FIFO 0
[ 130.807009] ieee80211 phy1: U iwlagn_tx_queue_set_status Activate AC/CMD Queue 4 on FIFO 7
[ 130.808537] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command COEX_PRIORITY_TABLE_CMD
[ 130.808542] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command COEX_PRIORITY_TABLE_CMD
[ 130.808549] ieee80211 phy1: U iwl_enqueue_hcmd Sending command COEX_PRIORITY_TABLE_CMD (#5a), seq: 0x0400, 72 bytes at 0[0]:4
[ 130.808583] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command COEX_PRIORITY_TABLE_CMD
[ 130.808610] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
[ 130.808616] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
[ 130.808622] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x4401, 12 bytes at 1[32]:4
[ 130.808675] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
[ 130.808920] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
[ 130.808924] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
[ 130.808929] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x4402, 512 bytes at 2[32]:4
[ 130.808967] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
[ 130.808977] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
[ 130.808981] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
[ 130.808985] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x4403, 92 bytes at 3[32]:4
[ 130.809020] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
[ 130.809246] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
[ 130.809250] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
[ 130.809255] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x4404, 52 bytes at 4[32]:4
[ 130.809286] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
[ 130.809297] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
[ 130.809300] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
[ 130.809305] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x4405, 12 bytes at 5[32]:4
[ 130.809334] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
[ 130.809352] ieee80211 phy1: U iwlagn_send_tx_ant_config select valid tx ant: 2
[ 130.809356] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command TX_ANT_CONFIGURATION_CMD
[ 130.809363] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command TX_ANT_CONFIGURATION_CMD
[ 130.809368] ieee80211 phy1: U iwl_enqueue_hcmd Sending command TX_ANT_CONFIGURATION_CMD (#98), seq: 0x0406, 8 bytes at 6[6]:4
[ 130.809392] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command TX_ANT_CONFIGURATION_CMD
[ 130.809408] ieee80211 phy1: U iwl_set_rxon_chain rx_chain=0x2406 active=2 idle=1
[ 130.809412] ieee80211 phy1: U iwl_send_bt_config BT coex active
[ 130.809415] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_BT_CONFIG
[ 130.809418] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_BT_CONFIG
[ 130.809422] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_BT_CONFIG (#9b), seq: 0x0407, 16 bytes at 7[7]:4
[ 130.809450] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_BT_CONFIG
[ 130.809462] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0408, 8 bytes at 8[8]:4
[ 130.809468] ieee80211 phy1: U iwl_commit_rxon Sending RXON
[ 130.809469] * without RXON_FILTER_ASSOC_MSK
[ 130.809470] * channel = 1
[ 130.809471] * bssid = 00:00:00:00:00:00
[ 130.809474] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 130.809478] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON
[ 130.809482] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0409, 54 bytes at 9[9]:4
[ 130.809500] ieee80211 phy1: I iwl_tt_handler Queueing thermal throttling work.
[ 130.809506] ieee80211 phy1: I iwl_generic_cmd_callback back from REPLY_STATISTICS_CMD (0x00000000)
[ 130.810765] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON
[ 130.810786] ieee80211 phy1: I iwl_tt_handler Queueing thermal throttling work.
[ 130.810795] ieee80211 phy1: U iwl_commit_rxon Return from !new_assoc RXON.
[ 130.810799] ieee80211 phy1: U iwl_clear_ucode_stations Clearing ucode stations in driver
[ 130.810802] ieee80211 phy1: U iwl_clear_ucode_stations No active stations found to be cleared
[ 130.810805] ieee80211 phy1: U iwl_restore_stations Not ready yet, not restoring any stations.
[ 130.810809] ieee80211 phy1: U iwl_print_rx_config_cmd RX CONFIG:
[ 130.810813] iwl data: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 130.810816] iwl data: 00000010: 00 00 00 00 00 00 00 00 03 00 06 24 ff 0f 00 00 ...........$....
[ 130.810819] iwl data: 00000020: 05 80 00 00 04 00 00 00 01 00 ff ff ff 00 00 00 ................
[ 130.810822] iwl data: 00000030: 00 00 ..
[ 130.810825] ieee80211 phy1: U iwl_print_rx_config_cmd u16 channel: 0x1
[ 130.810828] ieee80211 phy1: U iwl_print_rx_config_cmd u32 flags: 0x00008005
[ 130.810831] ieee80211 phy1: U iwl_print_rx_config_cmd u32 filter_flags: 0x00000004
[ 130.810834] ieee80211 phy1: U iwl_print_rx_config_cmd u8 dev_type: 0x3
[ 130.810837] ieee80211 phy1: U iwl_print_rx_config_cmd u8 ofdm_basic_rates: 0xff
[ 130.810840] ieee80211 phy1: U iwl_print_rx_config_cmd u8 cck_basic_rates: 0x0f
[ 130.810843] ieee80211 phy1: U iwl_print_rx_config_cmd u8[6] node_addr: 00:00:00:00:00:00
[ 130.810847] ieee80211 phy1: U iwl_print_rx_config_cmd u8[6] bssid_addr: 00:00:00:00:00:00
[ 130.810850] ieee80211 phy1: U iwl_print_rx_config_cmd u16 assoc_id: 0x0
[ 130.810855] ieee80211 phy1: U iwl_enqueue_hcmd Sending command SENSITIVITY_CMD (#a8), seq: 0x040A, 28 bytes at 10[10]:4
[ 130.810860] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_CT_KILL_CONFIG_CMD
[ 130.810863] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_CT_KILL_CONFIG_CMD
[ 130.810867] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_CT_KILL_CONFIG_CMD (#a4), seq: 0x040B, 16 bytes at 11[11]:4
[ 130.812193] ieee80211 phy1: I iwlagn_pass_packet_to_mac80211 Dropping packet while interface is not open.
[ 130.812208] ieee80211 phy1: I iwl_generic_cmd_callback back from SENSITIVITY_CMD (0x00000000)
[ 130.812213] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_CT_KILL_CONFIG_CMD
[ 130.812230] ieee80211 phy1: U iwl_rf_kill_ct_config REPLY_CT_KILL_CONFIG_CMD succeeded, critical temperature is 110
[ 130.812234] ieee80211 phy1: U iwl_alive_start ALIVE processing complete.
[ 130.812239] ieee80211 phy1: U iwl_power_sleep_cam_cmd Sleep command for CAM
[ 130.812242] ieee80211 phy1: U iwl_set_power Sending power/sleep command
[ 130.812245] ieee80211 phy1: U iwl_set_power Flags value = 0x00000000
[ 130.812248] ieee80211 phy1: U iwl_set_power Tx timeout = 0
[ 130.812250] ieee80211 phy1: U iwl_set_power Rx timeout = 0
[ 130.812254] ieee80211 phy1: U iwl_set_power Sleep interval vector = { 0 , 0 , 0 , 0 , 0 }
[ 130.812257] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command POWER_TABLE_CMD
[ 130.812262] ieee80211 phy1: U iwl_mac_start leave
[ 130.812267] ieee80211 phy1: U iwl_mac_add_interface enter: type 2, addr 00:21:5d:b3:d0:88
[ 130.812271] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command POWER_TABLE_CMD
[ 130.812276] ieee80211 phy1: U iwl_enqueue_hcmd Sending command POWER_TABLE_CMD (#77), seq: 0x040C, 40 bytes at 12[12]:4
[ 130.812334] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command POWER_TABLE_CMD
[ 130.812343] ieee80211 phy1: U iwl_set_rxon_chain rx_chain=0x2406 active=2 idle=1
[ 130.812347] ieee80211 phy1: U iwl_commit_rxon Sending RXON
[ 130.812348] * without RXON_FILTER_ASSOC_MSK
[ 130.812349] * channel = 1
[ 130.812350] * bssid = 00:00:00:00:00:00
[ 130.812354] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 130.812357] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON
[ 130.812361] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x040D, 54 bytes at 13[13]:4
[ 130.812570] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON
[ 130.812591] ieee80211 phy1: U iwl_commit_rxon Return from !new_assoc RXON.
[ 130.812600] ieee80211 phy1: I iwl_tt_handler Queueing thermal throttling work.
[ 130.812604] ieee80211 phy1: U iwl_clear_ucode_stations Clearing ucode stations in driver
[ 130.812607] ieee80211 phy1: U iwl_clear_ucode_stations No active stations found to be cleared
[ 130.812610] ieee80211 phy1: U iwl_restore_stations Restoring all known stations ... start.
[ 130.812613] ieee80211 phy1: U iwl_restore_stations Restoring sta ff:ff:ff:ff:ff:ff
[ 130.812617] ieee80211 phy1: U iwl_send_add_sta Adding sta 15 (ff:ff:ff:ff:ff:ff) synchronously
[ 130.812621] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 130.812624] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA
[ 130.812628] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x040E, 96 bytes at 14[14]:4
[ 130.812711] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA
[ 130.812723] ieee80211 phy1: U iwl_process_add_sta_resp Processing response for adding station 15
[ 130.812727] ieee80211 phy1: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 130.812731] ieee80211 phy1: U iwl_sta_ucode_activate Added STA id 15 addr ff:ff:ff:ff:ff:ff to uCode
[ 130.812734] ieee80211 phy1: U iwl_process_add_sta_resp Added station id 15 addr ff:ff:ff:ff:ff:ff
[ 130.812738] ieee80211 phy1: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 130.812742] ieee80211 phy1: U is_lq_table_valid Channel 1 is not an HT channel
[ 130.812746] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_LINK_QUALITY_CMD
[ 130.812749] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
[ 130.812754] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_TX_LINK_QUALITY_CMD (#4e), seq: 0x040F, 92 bytes at 15[15]:4
[ 130.812795] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
[ 130.812803] ieee80211 phy1: U iwl_send_lq_cmd init LQ command complete, clearing sta addition status for sta 15
[ 130.812806] ieee80211 phy1: U iwl_restore_stations Restoring all known stations .... complete.
[ 130.812810] ieee80211 phy1: U iwl_print_rx_config_cmd RX CONFIG:
[ 130.812813] iwl data: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 130.812816] iwl data: 00000010: 00 00 00 00 00 00 00 00 03 00 06 24 ff 0f 00 00 ...........$....
[ 130.812819] iwl data: 00000020: 05 80 00 00 04 00 00 00 01 00 ff ff ff 00 00 00 ................
[ 130.812822] iwl data: 00000030: 00 00 ..
[ 130.812825] ieee80211 phy1: U iwl_print_rx_config_cmd u16 channel: 0x1
[ 130.812828] ieee80211 phy1: U iwl_print_rx_config_cmd u32 flags: 0x00008005
[ 130.812831] ieee80211 phy1: U iwl_print_rx_config_cmd u32 filter_flags: 0x00000004
[ 130.812834] ieee80211 phy1: U iwl_print_rx_config_cmd u8 dev_type: 0x3
[ 130.812837] ieee80211 phy1: U iwl_print_rx_config_cmd u8 ofdm_basic_rates: 0xff
[ 130.812840] ieee80211 phy1: U iwl_print_rx_config_cmd u8 cck_basic_rates: 0x0f
[ 130.812843] ieee80211 phy1: U iwl_print_rx_config_cmd u8[6] node_addr: 00:00:00:00:00:00
[ 130.812846] ieee80211 phy1: U iwl_print_rx_config_cmd u8[6] bssid_addr: 00:00:00:00:00:00
[ 130.812849] ieee80211 phy1: U iwl_print_rx_config_cmd u16 assoc_id: 0x0
[ 130.812854] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x0410, 8 bytes at 16[16]:4
[ 130.812857] ieee80211 phy1: U iwl_alive_start Updated power mode
[ 130.812865] ieee80211 phy1: U iwl_set_rxon_chain rx_chain=0x2406 active=2 idle=1
[ 130.812870] ieee80211 phy1: U iwl_commit_rxon Sending RXON
[ 130.812871] * without RXON_FILTER_ASSOC_MSK
[ 130.812872] * channel = 1
[ 130.812873] * bssid = 00:00:00:00:00:00
[ 130.812876] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 130.812879] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON
[ 130.812883] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0411, 54 bytes at 17[17]:4
[ 130.812952] ieee80211 phy1: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
[ 130.813109] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON
[ 130.813434] ieee80211 phy1: U iwl_commit_rxon Return from !new_assoc RXON.
[ 130.813437] ieee80211 phy1: U iwl_clear_ucode_stations Clearing ucode stations in driver
[ 130.813441] ieee80211 phy1: U iwl_clear_ucode_stations Clearing ucode active for station 15
[ 130.813444] ieee80211 phy1: U iwl_restore_stations Restoring all known stations ... start.
[ 130.813447] ieee80211 phy1: U iwl_restore_stations Restoring sta ff:ff:ff:ff:ff:ff
[ 130.813451] ieee80211 phy1: U iwl_send_add_sta Adding sta 15 (ff:ff:ff:ff:ff:ff) synchronously
[ 130.813454] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 130.813458] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA
[ 130.813462] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0412, 96 bytes at 18[18]:4
[ 130.813521] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA
[ 130.813838] ieee80211 phy1: U iwl_process_add_sta_resp Processing response for adding station 15
[ 130.813842] ieee80211 phy1: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 130.813845] ieee80211 phy1: U iwl_sta_ucode_activate Added STA id 15 addr ff:ff:ff:ff:ff:ff to uCode
[ 130.813849] ieee80211 phy1: U iwl_process_add_sta_resp Added station id 15 addr ff:ff:ff:ff:ff:ff
[ 130.813853] ieee80211 phy1: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 130.813857] ieee80211 phy1: U is_lq_table_valid Channel 1 is not an HT channel
[ 130.813860] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_LINK_QUALITY_CMD
[ 130.813863] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
[ 130.813868] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_TX_LINK_QUALITY_CMD (#4e), seq: 0x0413, 92 bytes at 19[19]:4
[ 130.813912] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
[ 130.813931] ieee80211 phy1: U iwl_send_lq_cmd init LQ command complete, clearing sta addition status for sta 15
[ 130.813935] ieee80211 phy1: U iwl_restore_stations Restoring all known stations .... complete.
[ 130.813938] ieee80211 phy1: U iwl_print_rx_config_cmd RX CONFIG:
[ 130.813942] iwl data: 00000000: 00 21 5d b3 d0 88 00 00 00 00 00 00 00 00 00 00 .!].............
[ 130.813945] iwl data: 00000010: 00 00 00 00 00 00 00 00 03 00 06 24 ff 0f 00 00 ...........$....
[ 130.813948] iwl data: 00000020: 05 80 00 00 04 00 00 00 01 00 ff ff ff 00 00 00 ................
[ 130.813951] iwl data: 00000030: 00 00 ..
[ 130.813953] ieee80211 phy1: U iwl_print_rx_config_cmd u16 channel: 0x1
[ 130.813957] ieee80211 phy1: U iwl_print_rx_config_cmd u32 flags: 0x00008005
[ 130.813960] ieee80211 phy1: U iwl_print_rx_config_cmd u32 filter_flags: 0x00000004
[ 130.813963] ieee80211 phy1: U iwl_print_rx_config_cmd u8 dev_type: 0x3
[ 130.813966] ieee80211 phy1: U iwl_print_rx_config_cmd u8 ofdm_basic_rates: 0xff
[ 130.813969] ieee80211 phy1: U iwl_print_rx_config_cmd u8 cck_basic_rates: 0x0f
[ 130.813972] ieee80211 phy1: U iwl_print_rx_config_cmd u8[6] node_addr: 00:21:5d:b3:d0:88
[ 130.813975] ieee80211 phy1: U iwl_print_rx_config_cmd u8[6] bssid_addr: 00:00:00:00:00:00
[ 130.813978] ieee80211 phy1: U iwl_print_rx_config_cmd u16 assoc_id: 0x0
[ 130.813983] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x0414, 8 bytes at 20[20]:4
[ 130.813988] ieee80211 phy1: U iwl_mac_add_interface leave
[ 130.813991] ieee80211 phy1: U iwl_bss_info_changed changes = 0xE
[ 130.813994] ieee80211 phy1: U iwl_bss_info_changed ERP_PREAMBLE 0
[ 130.813997] ieee80211 phy1: U iwl_bss_info_changed ERP_CTS 0
[ 130.814000] ieee80211 phy1: U iwl_bss_info_changed leave
[ 130.814016] phy1: device now idle
[ 130.814019] ieee80211 phy1: U iwl_mac_flush enter
[ 130.814022] ieee80211 phy1: U iwl_mac_flush wait transmit/flush all frames
[ 130.814025] ieee80211 phy1: U iwl_mac_flush leave
[ 130.814029] ieee80211 phy1: U iwl_mac_config enter to channel 1 changed 0xFFFFFFFF
[ 130.814033] ieee80211 phy1: U iwl_set_rxon_chain rx_chain=0x2406 active=2 idle=1
[ 130.814038] ieee80211 phy1: U iwl_power_sleep_cam_cmd Sleep command for CAM
[ 130.814041] ieee80211 phy1: U iwl_mac_config TX Power old=15 new=15
[ 130.814045] ieee80211 phy1: U iwl_commit_rxon Sending RXON
[ 130.814047] * without RXON_FILTER_ASSOC_MSK
[ 130.814048] * channel = 1
[ 130.814048] * bssid = 00:00:00:00:00:00
[ 130.814052] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 130.814055] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON
[ 130.814059] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0415, 54 bytes at 21[21]:4
[ 130.814097] ieee80211 phy1: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
[ 130.814256] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON
[ 130.814523] ieee80211 phy1: U iwl_commit_rxon Return from !new_assoc RXON.
[ 130.814525] ieee80211 phy1: U iwl_clear_ucode_stations Clearing ucode stations in driver
[ 130.814527] ieee80211 phy1: U iwl_clear_ucode_stations Clearing ucode active for station 15
[ 130.814529] ieee80211 phy1: U iwl_restore_stations Restoring all known stations ... start.
[ 130.814531] ieee80211 phy1: U iwl_restore_stations Restoring sta ff:ff:ff:ff:ff:ff
[ 130.814533] ieee80211 phy1: U iwl_send_add_sta Adding sta 15 (ff:ff:ff:ff:ff:ff) synchronously
[ 130.814535] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 130.814537] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA
[ 130.814539] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0416, 96 bytes at 22[22]:4
[ 130.814571] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA
[ 130.814581] ieee80211 phy1: U iwl_process_add_sta_resp Processing response for adding station 15
[ 130.814583] ieee80211 phy1: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 130.814585] ieee80211 phy1: U iwl_sta_ucode_activate Added STA id 15 addr ff:ff:ff:ff:ff:ff to uCode
[ 130.814587] ieee80211 phy1: U iwl_process_add_sta_resp Added station id 15 addr ff:ff:ff:ff:ff:ff
[ 130.814589] ieee80211 phy1: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 130.814591] ieee80211 phy1: U is_lq_table_valid Channel 1 is not an HT channel
[ 130.814593] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_LINK_QUALITY_CMD
[ 130.814595] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
[ 130.814598] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_TX_LINK_QUALITY_CMD (#4e), seq: 0x0417, 92 bytes at 23[23]:4
[ 130.814637] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
[ 130.814641] ieee80211 phy1: U iwl_send_lq_cmd init LQ command complete, clearing sta addition status for sta 15
[ 130.814643] ieee80211 phy1: U iwl_restore_stations Restoring all known stations .... complete.
[ 130.814645] ieee80211 phy1: U iwl_print_rx_config_cmd RX CONFIG:
[ 130.814647] iwl data: 00000000: 00 21 5d b3 d0 88 00 00 00 00 00 00 00 00 00 00 .!].............
[ 130.814649] iwl data: 00000010: 00 00 00 00 00 00 00 00 03 00 06 24 15 03 00 00 ...........$....
[ 130.814651] iwl data: 00000020: 05 80 00 00 04 00 00 00 01 00 ff ff ff 00 00 00 ................
[ 130.814652] iwl data: 00000030: 00 00 ..
[ 130.814654] ieee80211 phy1: U iwl_print_rx_config_cmd u16 channel: 0x1
[ 130.814656] ieee80211 phy1: U iwl_print_rx_config_cmd u32 flags: 0x00008005
[ 130.814657] ieee80211 phy1: U iwl_print_rx_config_cmd u32 filter_flags: 0x00000004
[ 130.814659] ieee80211 phy1: U iwl_print_rx_config_cmd u8 dev_type: 0x3
[ 130.814661] ieee80211 phy1: U iwl_print_rx_config_cmd u8 ofdm_basic_rates: 0x15
[ 130.814663] ieee80211 phy1: U iwl_print_rx_config_cmd u8 cck_basic_rates: 0x03
[ 130.814664] ieee80211 phy1: U iwl_print_rx_config_cmd u8[6] node_addr: 00:21:5d:b3:d0:88
[ 130.814666] ieee80211 phy1: U iwl_print_rx_config_cmd u8[6] bssid_addr: 00:00:00:00:00:00
[ 130.814668] ieee80211 phy1: U iwl_print_rx_config_cmd u16 assoc_id: 0x0
[ 130.814671] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x0418, 8 bytes at 24[24]:4
[ 130.814673] ieee80211 phy1: U iwl_mac_config leave
[ 130.814676] ieee80211 phy1: U iwl_mac_conf_tx enter
[ 130.814677] ieee80211 phy1: U iwl_mac_conf_tx leave
[ 130.814679] ieee80211 phy1: U iwl_mac_conf_tx enter
[ 130.814680] ieee80211 phy1: U iwl_mac_conf_tx leave
[ 130.814682] ieee80211 phy1: U iwl_mac_conf_tx enter
[ 130.814683] ieee80211 phy1: U iwl_mac_conf_tx leave
[ 130.814685] ieee80211 phy1: U iwl_mac_conf_tx enter
[ 130.814686] ieee80211 phy1: U iwl_mac_conf_tx leave
[ 130.814688] ieee80211 phy1: U iwl_bss_info_changed changes = 0x2000
[ 130.814690] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_QOS_PARAM (#13), seq: 0x0419, 40 bytes at 25[25]:4
[ 130.814693] ieee80211 phy1: U iwl_bss_info_changed leave
[ 130.814713] phy1: device no longer idle - scanning
[ 130.814715] ieee80211 phy1: U iwl_mac_config enter to channel 1 changed 0x100
[ 130.814717] ieee80211 phy1: U iwl_power_sleep_cam_cmd Sleep command for CAM
[ 130.814719] ieee80211 phy1: U iwl_mac_config Not re-sending same RXON configuration.
[ 130.814721] ieee80211 phy1: U iwl_mac_config leave
[ 130.814723] ieee80211 phy1: U iwl_mac_hw_scan enter
[ 130.814725] ieee80211 phy1: U iwl_scan_initiate Starting scan...
[ 130.814730] ieee80211 phy1: U iwlagn_request_scan Kicking off active scan
[ 130.814733] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=1 prob=0x3 [ACTIVE 36]
[ 130.814735] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=2 prob=0x3 [ACTIVE 36]
[ 130.814737] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=3 prob=0x3 [ACTIVE 36]
[ 130.814740] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=4 prob=0x3 [ACTIVE 36]
[ 130.814742] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=5 prob=0x3 [ACTIVE 36]
[ 130.814744] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=6 prob=0x3 [ACTIVE 36]
[ 130.814747] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=7 prob=0x3 [ACTIVE 36]
[ 130.814749] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=8 prob=0x3 [ACTIVE 36]
[ 130.814751] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=9 prob=0x3 [ACTIVE 36]
[ 130.814753] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=10 prob=0x3 [ACTIVE 36]
[ 130.814755] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=11 prob=0x3 [ACTIVE 36]
[ 130.814758] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=12 prob=0x2 [PASSIVE 120]
[ 130.814760] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=13 prob=0x2 [PASSIVE 120]
[ 130.814762] ieee80211 phy1: U iwl_get_channels_for_scan total channels to scan 13
[ 130.814764] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_SCAN_CMD
[ 130.814765] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_SCAN_CMD
[ 130.814766] ieee80211 phy1: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
[ 130.814771] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_SCAN_CMD (#80), seq: 0x441A, 994 bytes at 26[32]:4
[ 130.814776] ieee80211 phy1: U iwl_configure_filter Enter: changed: 0x10, total: 0x80000010
[ 130.814936] ieee80211 phy1: I iwl_generic_cmd_callback back from REPLY_QOS_PARAM (0x00000000)
[ 130.814938] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_SCAN_CMD
[ 130.814943] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 1 [802.11bg] (TSF: 0x00000000:000002F2) - 1 (beacon timer 101646)
[ 130.814959] ieee80211 phy1: U iwl_mac_hw_scan leave
[ 130.815857] ieee80211 phy1: U iwl_commit_rxon Sending RXON
[ 130.815858] * without RXON_FILTER_ASSOC_MSK
[ 130.815858] * channel = 1
[ 130.815859] * bssid = 00:00:00:00:00:00
[ 130.815861] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 130.815863] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON
[ 130.815866] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x041B, 54 bytes at 27[27]:4
[ 130.816300] ieee80211 phy1: I iwl_rx_scan_complete_notif Scan complete: 0 channels (TSF 0x00000848:00000000) - 8
[ 130.816304] ieee80211 phy1: I iwl_rx_scan_complete_notif Scan on 2.4GHz took 2ms
[ 130.816305] ieee80211 phy1: I iwl_rx_scan_complete_notif Setting scan to off
[ 130.816422] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON
[ 130.816428] ieee80211 phy1: U iwl_commit_rxon Return from !new_assoc RXON.
[ 130.816431] ieee80211 phy1: U iwl_clear_ucode_stations Clearing ucode stations in driver
[ 130.816440] ieee80211 phy1: U iwl_clear_ucode_stations Clearing ucode active for station 15
[ 130.816442] ieee80211 phy1: U iwl_restore_stations Restoring all known stations ... start.
[ 130.816444] ieee80211 phy1: U iwl_restore_stations Restoring sta ff:ff:ff:ff:ff:ff
[ 130.816446] ieee80211 phy1: U iwl_send_add_sta Adding sta 15 (ff:ff:ff:ff:ff:ff) synchronously
[ 130.816448] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 130.816450] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA
[ 130.816453] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x041C, 96 bytes at 28[28]:4
[ 130.816509] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA
[ 130.816514] ieee80211 phy1: U iwl_process_add_sta_resp Processing response for adding station 15
[ 130.816516] ieee80211 phy1: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 130.816518] ieee80211 phy1: U iwl_sta_ucode_activate Added STA id 15 addr ff:ff:ff:ff:ff:ff to uCode
[ 130.816520] ieee80211 phy1: U iwl_process_add_sta_resp Added station id 15 addr ff:ff:ff:ff:ff:ff
[ 130.816522] ieee80211 phy1: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 130.816525] ieee80211 phy1: U is_lq_table_valid Channel 1 is not an HT channel
[ 130.816527] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_LINK_QUALITY_CMD
[ 130.816529] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
[ 130.816531] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_TX_LINK_QUALITY_CMD (#4e), seq: 0x041D, 92 bytes at 29[29]:4
[ 130.816581] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
[ 130.816597] ieee80211 phy1: U iwl_send_lq_cmd init LQ command complete, clearing sta addition status for sta 15
[ 130.816599] ieee80211 phy1: U iwl_restore_stations Restoring all known stations .... complete.
[ 130.816601] ieee80211 phy1: U iwl_print_rx_config_cmd RX CONFIG:
[ 130.816604] iwl data: 00000000: 00 21 5d b3 d0 88 00 00 00 00 00 00 00 00 00 00 .!].............
[ 130.816605] iwl data: 00000010: 00 00 00 00 00 00 00 00 03 00 06 24 15 03 00 00 ...........$....
[ 130.816607] iwl data: 00000020: 05 80 00 00 44 00 00 00 01 00 ff ff ff 00 00 00 ....D...........
[ 130.816609] iwl data: 00000030: 00 00 ..
[ 130.816610] ieee80211 phy1: U iwl_print_rx_config_cmd u16 channel: 0x1
[ 130.816612] ieee80211 phy1: U iwl_print_rx_config_cmd u32 flags: 0x00008005
[ 130.816614] ieee80211 phy1: U iwl_print_rx_config_cmd u32 filter_flags: 0x00000044
[ 130.816616] ieee80211 phy1: U iwl_print_rx_config_cmd u8 dev_type: 0x3
[ 130.816617] ieee80211 phy1: U iwl_print_rx_config_cmd u8 ofdm_basic_rates: 0x15
[ 130.816619] ieee80211 phy1: U iwl_print_rx_config_cmd u8 cck_basic_rates: 0x03
[ 130.816621] ieee80211 phy1: U iwl_print_rx_config_cmd u8[6] node_addr: 00:21:5d:b3:d0:88
[ 130.816623] ieee80211 phy1: U iwl_print_rx_config_cmd u8[6] bssid_addr: 00:00:00:00:00:00
[ 130.816625] ieee80211 phy1: U iwl_print_rx_config_cmd u16 assoc_id: 0x0
[ 130.816627] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x041E, 8 bytes at 30[30]:4
[ 130.816632] ieee80211 phy1: U iwl_configure_filter Enter: changed: 0x0, total: 0x80000010
[ 130.816634] ieee80211 phy1: U iwl_commit_rxon Sending RXON
[ 130.816635] * without RXON_FILTER_ASSOC_MSK
[ 130.816635] * channel = 1
[ 130.816636] * bssid = 00:00:00:00:00:00
[ 130.816638] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 130.816640] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON
[ 130.816642] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x041F, 54 bytes at 31[31]:4
[ 130.816751] ieee80211 phy1: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
[ 130.816914] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON
[ 130.816918] ieee80211 phy1: U iwl_commit_rxon Return from !new_assoc RXON.
[ 130.816920] ieee80211 phy1: U iwl_clear_ucode_stations Clearing ucode stations in driver
[ 130.816922] ieee80211 phy1: U iwl_clear_ucode_stations Clearing ucode active for station 15
[ 130.816924] ieee80211 phy1: U iwl_restore_stations Restoring all known stations ... start.
[ 130.816926] ieee80211 phy1: U iwl_restore_stations Restoring sta ff:ff:ff:ff:ff:ff
[ 130.816928] ieee80211 phy1: U iwl_send_add_sta Adding sta 15 (ff:ff:ff:ff:ff:ff) synchronously
[ 130.816930] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 130.816932] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA
[ 130.816935] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0420, 96 bytes at 32[0]:4
[ 130.817009] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA
[ 130.817681] ieee80211 phy1: U iwl_process_add_sta_resp Processing response for adding station 15
[ 130.817683] ieee80211 phy1: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 130.817685] ieee80211 phy1: U iwl_sta_ucode_activate Added STA id 15 addr ff:ff:ff:ff:ff:ff to uCode
[ 130.817687] ieee80211 phy1: U iwl_process_add_sta_resp Added station id 15 addr ff:ff:ff:ff:ff:ff
[ 130.817689] ieee80211 phy1: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 130.817692] ieee80211 phy1: U is_lq_table_valid Channel 1 is not an HT channel
[ 130.817694] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_LINK_QUALITY_CMD
[ 130.817696] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
[ 130.817698] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_TX_LINK_QUALITY_CMD (#4e), seq: 0x0421, 92 bytes at 33[1]:4
[ 130.817761] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
[ 130.817985] ieee80211 phy1: U iwl_send_lq_cmd init LQ command complete, clearing sta addition status for sta 15
[ 130.817987] ieee80211 phy1: U iwl_restore_stations Restoring all known stations .... complete.
[ 130.817989] ieee80211 phy1: U iwl_print_rx_config_cmd RX CONFIG:
[ 130.817991] iwl data: 00000000: 00 21 5d b3 d0 88 00 00 00 00 00 00 00 00 00 00 .!].............
[ 130.817993] iwl data: 00000010: 00 00 00 00 00 00 00 00 03 00 06 24 15 03 00 00 ...........$....
[ 130.817995] iwl data: 00000020: 05 80 00 00 44 00 00 00 01 00 ff ff ff 00 00 00 ....D...........
[ 130.817996] iwl data: 00000030: 00 00 ..
[ 130.817998] ieee80211 phy1: U iwl_print_rx_config_cmd u16 channel: 0x1
[ 130.818011] ieee80211 phy1: U iwl_print_rx_config_cmd u32 flags: 0x00008005
[ 130.818013] ieee80211 phy1: U iwl_print_rx_config_cmd u32 filter_flags: 0x00000044
[ 130.818015] ieee80211 phy1: U iwl_print_rx_config_cmd u8 dev_type: 0x3
[ 130.818017] ieee80211 phy1: U iwl_print_rx_config_cmd u8 ofdm_basic_rates: 0x15
[ 130.818019] ieee80211 phy1: U iwl_print_rx_config_cmd u8 cck_basic_rates: 0x03
[ 130.818020] ieee80211 phy1: U iwl_print_rx_config_cmd u8[6] node_addr: 00:21:5d:b3:d0:88
[ 130.818022] ieee80211 phy1: U iwl_print_rx_config_cmd u8[6] bssid_addr: 00:00:00:00:00:00
[ 130.818024] ieee80211 phy1: U iwl_print_rx_config_cmd u16 assoc_id: 0x0
[ 130.818027] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x0422, 8 bytes at 34[2]:4
[ 130.818032] ieee80211 phy1: U iwl_bg_scan_completed SCAN complete scan
[ 130.818034] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x0423, 8 bytes at 35[3]:4
[ 130.818039] ieee80211 phy1: U iwl_mac_hw_scan enter
[ 130.818040] ieee80211 phy1: U iwl_scan_initiate Starting scan...
[ 130.818043] ieee80211 phy1: U iwlagn_request_scan Kicking off active scan
[ 130.818046] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=36 prob=0x2 [PASSIVE 110]
[ 130.818048] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=40 prob=0x2 [PASSIVE 110]
[ 130.818050] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=44 prob=0x2 [PASSIVE 110]
[ 130.818053] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=48 prob=0x2 [PASSIVE 110]
[ 130.818055] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=52 prob=0x2 [PASSIVE 110]
[ 130.818057] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=56 prob=0x2 [PASSIVE 110]
[ 130.818059] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=60 prob=0x2 [PASSIVE 110]
[ 130.818061] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=64 prob=0x2 [PASSIVE 110]
[ 130.818063] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=100 prob=0x2 [PASSIVE 110]
[ 130.818066] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=104 prob=0x2 [PASSIVE 110]
[ 130.818068] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=108 prob=0x2 [PASSIVE 110]
[ 130.818070] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=112 prob=0x2 [PASSIVE 110]
[ 130.818072] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=116 prob=0x2 [PASSIVE 110]
[ 130.818074] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=120 prob=0x2 [PASSIVE 110]
[ 130.818076] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=124 prob=0x2 [PASSIVE 110]
[ 130.818079] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=128 prob=0x2 [PASSIVE 110]
[ 130.818081] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=132 prob=0x2 [PASSIVE 110]
[ 130.818083] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=136 prob=0x2 [PASSIVE 110]
[ 130.818085] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=140 prob=0x2 [PASSIVE 110]
[ 130.818088] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=149 prob=0x2 [PASSIVE 110]
[ 130.818090] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=153 prob=0x2 [PASSIVE 110]
[ 130.818092] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=157 prob=0x2 [PASSIVE 110]
[ 130.818094] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=161 prob=0x2 [PASSIVE 110]
[ 130.818096] ieee80211 phy1: U iwl_get_channels_for_scan Scanning ch=165 prob=0x2 [PASSIVE 110]
[ 130.818098] ieee80211 phy1: U iwl_get_channels_for_scan total channels to scan 24
[ 130.818100] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_SCAN_CMD
[ 130.818101] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_SCAN_CMD
[ 130.818105] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_SCAN_CMD (#80), seq: 0x4424, 1120 bytes at 36[32]:4
[ 130.818124] ieee80211 phy1: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
[ 130.818202] ieee80211 phy1: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
[ 130.819503] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_SCAN_CMD
[ 130.819509] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 36 [802.11a] (TSF: 0x00000000:00000A6F) - 1 (beacon timer 99729)
[ 130.819525] ieee80211 phy1: U iwl_mac_hw_scan leave
[ 130.932199] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 36 [802.11a] (TSF: 0x00000000:0001C29B) - 0 elapsed=112684 usec
[ 130.933397] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 40 [802.11a] (TSF: 0x00000000:0001C74A) - 1 (beacon timer 4282550)
[ 131.046083] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 40 [802.11a] (TSF: 0x00000000:00037F79) - 0 elapsed=112687 usec
[ 131.047281] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 44 [802.11a] (TSF: 0x00000000:00038428) - 1 (beacon timer 8465368)
[ 131.159998] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 44 [802.11a] (TSF: 0x00000000:00053C6C) - 0 elapsed=112708 usec
[ 131.161201] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 48 [802.11a] (TSF: 0x00000000:0005411C) - 1 (beacon timer 12648164)
[ 131.273899] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 48 [802.11a] (TSF: 0x00000000:0006F95F) - 0 elapsed=112707 usec
[ 131.275107] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 52 [802.11a] (TSF: 0x00000000:0006FE12) - 1 (beacon timer 16830958)
[ 131.387811] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 52 [802.11a] (TSF: 0x00000000:0008B656) - 0 elapsed=112708 usec
[ 131.389024] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 56 [802.11a] (TSF: 0x00000000:0008BB0A) - 1 (beacon timer 21013750)
[ 131.501732] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 56 [802.11a] (TSF: 0x00000000:000A734D) - 0 elapsed=112707 usec
[ 131.502936] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 60 [802.11a] (TSF: 0x00000000:000A7802) - 1 (beacon timer 25196542)
[ 131.615649] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 60 [802.11a] (TSF: 0x00000000:000C3040) - 0 elapsed=112702 usec
[ 131.616847] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 64 [802.11a] (TSF: 0x00000000:000C34F4) - 1 (beacon timer 29379340)
[ 131.729550] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 64 [802.11a] (TSF: 0x00000000:000DED34) - 0 elapsed=112704 usec
[ 131.730751] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 100 [802.11a] (TSF: 0x00000000:000DF1E6) - 1 (beacon timer 33562138)
[ 131.843454] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 100 [802.11a] (TSF: 0x00000000:000FAA2D) - 0 elapsed=112711 usec
[ 131.844657] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 104 [802.11a] (TSF: 0x00000000:000FAED9) - 1 (beacon timer 42041639)
[ 131.957366] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 104 [802.11a] (TSF: 0x00000000:00116722) - 0 elapsed=112713 usec
[ 131.958566] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 108 [802.11a] (TSF: 0x00000000:00116BD2) - 1 (beacon timer 46224430)
[ 132.071268] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 108 [802.11a] (TSF: 0x00000000:00132407) - 0 elapsed=112693 usec
[ 132.072465] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 112 [802.11a] (TSF: 0x00000000:001328B7) - 1 (beacon timer 50407241)
[ 132.185157] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 112 [802.11a] (TSF: 0x00000000:0014E0EC) - 0 elapsed=112693 usec
[ 132.186357] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 116 [802.11a] (TSF: 0x00000000:0014E59E) - 1 (beacon timer 54590050)
[ 132.299071] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 116 [802.11a] (TSF: 0x00000000:00169DE5) - 0 elapsed=112711 usec
[ 132.300276] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 120 [802.11a] (TSF: 0x00000000:0016A296) - 1 (beacon timer 58772842)
[ 132.412967] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 120 [802.11a] (TSF: 0x00000000:00185ACB) - 0 elapsed=112693 usec
[ 132.414171] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 124 [802.11a] (TSF: 0x00000000:00185F7B) - 1 (beacon timer 62955653)
[ 132.526866] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 124 [802.11a] (TSF: 0x00000000:001A17B1) - 0 elapsed=112694 usec
[ 132.528063] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 128 [802.11a] (TSF: 0x00000000:001A1C62) - 1 (beacon timer 67138462)
[ 132.640758] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 128 [802.11a] (TSF: 0x00000000:001BD498) - 0 elapsed=112694 usec
[ 132.641967] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 132 [802.11a] (TSF: 0x00000000:001BD94D) - 1 (beacon timer 71321267)
[ 132.754681] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 132 [802.11a] (TSF: 0x00000000:001D9193) - 0 elapsed=112710 usec
[ 132.755887] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 136 [802.11a] (TSF: 0x00000000:001D9648) - 1 (beacon timer 75504056)
[ 132.868588] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 136 [802.11a] (TSF: 0x00000000:001F4E8E) - 0 elapsed=112710 usec
[ 132.869789] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 140 [802.11a] (TSF: 0x00000000:001F5340) - 1 (beacon timer 83983552)
[ 132.982494] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 140 [802.11a] (TSF: 0x00000000:00210B75) - 0 elapsed=112693 usec
[ 132.983701] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 149 [802.11a] (TSF: 0x00000000:00211027) - 1 (beacon timer 88166361)
[ 133.096383] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 149 [802.11a] (TSF: 0x00000000:0022C85C) - 0 elapsed=112693 usec
[ 133.097585] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 153 [802.11a] (TSF: 0x00000000:0022CD0E) - 1 (beacon timer 92349170)
[ 133.210277] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 153 [802.11a] (TSF: 0x00000000:00248543) - 0 elapsed=112693 usec
[ 133.211488] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 157 [802.11a] (TSF: 0x00000000:002489F8) - 1 (beacon timer 96531976)
[ 133.324202] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 157 [802.11a] (TSF: 0x00000000:0026423F) - 0 elapsed=112711 usec
[ 133.325400] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 161 [802.11a] (TSF: 0x00000000:002646F5) - 1 (beacon timer 100714763)
[ 133.438119] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 161 [802.11a] (TSF: 0x00000000:0027FF3B) - 0 elapsed=112710 usec
[ 133.439322] ieee80211 phy1: I iwl_rx_scan_start_notif Scan start: 165 [802.11a] (TSF: 0x00000000:002803F1) - 1 (beacon timer 104897551)
[ 133.552039] ieee80211 phy1: I iwl_rx_scan_results_notif Scan ch.res: 165 [802.11a] (TSF: 0x00000000:0029BC37) - 0 elapsed=112710 usec
[ 133.553247] ieee80211 phy1: I iwl_rx_scan_complete_notif Scan complete: 24 channels (TSF 0x0029C0F2:00000000) - 1
[ 133.553253] ieee80211 phy1: I iwl_rx_scan_complete_notif Scan on 5.2GHz took 2735ms
[ 133.553256] ieee80211 phy1: I iwl_rx_scan_complete_notif Setting scan to off
[ 133.553272] ieee80211 phy1: U iwl_bg_scan_completed SCAN complete scan
[ 133.553280] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x0425, 8 bytes at 37[5]:4
[ 133.553292] ieee80211 phy1: U iwl_mac_config enter to channel 1 changed 0x40
[ 133.553296] ieee80211 phy1: U iwl_set_rxon_chain rx_chain=0x2406 active=2 idle=1
[ 133.553302] ieee80211 phy1: U iwl_mac_config Not re-sending same RXON configuration.
[ 133.553305] ieee80211 phy1: U iwl_mac_config leave
[ 133.553308] phy1: device now idle
[ 133.553311] ieee80211 phy1: U iwl_mac_flush enter
[ 133.553314] ieee80211 phy1: U iwl_mac_flush wait transmit/flush all frames
[ 133.553318] ieee80211 phy1: U iwl_mac_flush leave
[ 133.553321] ieee80211 phy1: U iwl_mac_config enter to channel 1 changed 0x100
[ 133.553325] ieee80211 phy1: U iwl_power_sleep_cam_cmd Sleep command for CAM
[ 133.553328] ieee80211 phy1: U iwl_mac_config Not re-sending same RXON configuration.
[ 133.553331] ieee80211 phy1: U iwl_mac_config leave
[ 133.553390] ieee80211 phy1: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
[ 133.577022] ieee80211 phy1: I iwl_enqueue_hcmd Sending command REPLY_LEDS_CMD (#48), seq: 0x0426, 12 bytes at 38[6]:4
[ 133.577045] ieee80211 phy1: I iwl_generic_cmd_callback back from REPLY_LEDS_CMD (0x00000000)
[ 193.039097] ieee80211 phy1: U iwl_configure_filter Enter: changed: 0x10, total: 0x80000000
[ 193.039104] ieee80211 phy1: U iwl_commit_rxon Sending RXON
[ 193.039104] * without RXON_FILTER_ASSOC_MSK
[ 193.039105] * channel = 1
[ 193.039105] * bssid = 00:00:00:00:00:00
[ 193.039108] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 193.039110] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON
[ 193.039114] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0427, 54 bytes at 39[7]:4
[ 193.039277] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON
[ 193.039286] ieee80211 phy1: U iwl_commit_rxon Return from !new_assoc RXON.
[ 193.039289] ieee80211 phy1: U iwl_clear_ucode_stations Clearing ucode stations in driver
[ 193.039291] ieee80211 phy1: U iwl_clear_ucode_stations Clearing ucode active for station 15
[ 193.039294] ieee80211 phy1: I iwl_tt_handler Queueing thermal throttling work.
[ 193.039303] ieee80211 phy1: U iwl_restore_stations Restoring all known stations ... start.
[ 193.039305] ieee80211 phy1: U iwl_restore_stations Restoring sta ff:ff:ff:ff:ff:ff
[ 193.039308] ieee80211 phy1: U iwl_send_add_sta Adding sta 15 (ff:ff:ff:ff:ff:ff) synchronously
[ 193.039310] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 193.039312] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA
[ 193.039315] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0428, 96 bytes at 40[8]:4
[ 193.039371] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA
[ 193.039377] ieee80211 phy1: U iwl_process_add_sta_resp Processing response for adding station 15
[ 193.039380] ieee80211 phy1: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 193.039382] ieee80211 phy1: U iwl_sta_ucode_activate Added STA id 15 addr ff:ff:ff:ff:ff:ff to uCode
[ 193.039384] ieee80211 phy1: U iwl_process_add_sta_resp Added station id 15 addr ff:ff:ff:ff:ff:ff
[ 193.039386] ieee80211 phy1: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 193.039389] ieee80211 phy1: U is_lq_table_valid Channel 1 is not an HT channel
[ 193.039391] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_LINK_QUALITY_CMD
[ 193.039393] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
[ 193.039396] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_TX_LINK_QUALITY_CMD (#4e), seq: 0x0429, 92 bytes at 41[9]:4
[ 193.039432] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
[ 193.039448] ieee80211 phy1: U iwl_send_lq_cmd init LQ command complete, clearing sta addition status for sta 15
[ 193.039450] ieee80211 phy1: U iwl_restore_stations Restoring all known stations .... complete.
[ 193.039453] ieee80211 phy1: U iwl_print_rx_config_cmd RX CONFIG:
[ 193.039455] iwl data: 00000000: 00 21 5d b3 d0 88 00 00 00 00 00 00 00 00 00 00 .!].............
[ 193.039457] iwl data: 00000010: 00 00 00 00 00 00 00 00 03 00 06 24 15 03 00 00 ...........$....
[ 193.039459] iwl data: 00000020: 05 80 00 00 04 00 00 00 01 00 ff ff ff 00 00 00 ................
[ 193.039460] iwl data: 00000030: 00 00 ..
[ 193.039462] ieee80211 phy1: U iwl_print_rx_config_cmd u16 channel: 0x1
[ 193.039464] ieee80211 phy1: U iwl_print_rx_config_cmd u32 flags: 0x00008005
[ 193.039466] ieee80211 phy1: U iwl_print_rx_config_cmd u32 filter_flags: 0x00000004
[ 193.039468] ieee80211 phy1: U iwl_print_rx_config_cmd u8 dev_type: 0x3
[ 193.039469] ieee80211 phy1: U iwl_print_rx_config_cmd u8 ofdm_basic_rates: 0x15
[ 193.039471] ieee80211 phy1: U iwl_print_rx_config_cmd u8 cck_basic_rates: 0x03
[ 193.039473] ieee80211 phy1: U iwl_print_rx_config_cmd u8[6] node_addr: 00:21:5d:b3:d0:88
[ 193.039475] ieee80211 phy1: U iwl_print_rx_config_cmd u8[6] bssid_addr: 00:00:00:00:00:00
[ 193.039476] ieee80211 phy1: U iwl_print_rx_config_cmd u16 assoc_id: 0x0
[ 193.039481] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x042A, 8 bytes at 42[10]:4
[ 193.039486] ieee80211 phy1: U iwl_legacy_tt_handler Temperature increase 14 degree Celsius
[ 193.039581] ieee80211 phy1: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
[ 198.923638] ieee80211 phy1: U iwl_configure_filter Enter: changed: 0x0, total: 0x80000000
[ 198.923646] ieee80211 phy1: U iwl_commit_rxon Sending RXON
[ 198.923646] * without RXON_FILTER_ASSOC_MSK
[ 198.923647] * channel = 1
[ 198.923648] * bssid = 00:00:00:00:00:00
[ 198.923651] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 198.923652] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON
[ 198.923656] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x042B, 54 bytes at 43[11]:4
[ 198.923819] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON
[ 198.923825] ieee80211 phy1: U iwl_commit_rxon Return from !new_assoc RXON.
[ 198.923827] ieee80211 phy1: U iwl_clear_ucode_stations Clearing ucode stations in driver
[ 198.923829] ieee80211 phy1: U iwl_clear_ucode_stations Clearing ucode active for station 15
[ 198.923831] ieee80211 phy1: U iwl_restore_stations Restoring all known stations ... start.
[ 198.923834] ieee80211 phy1: U iwl_restore_stations Restoring sta ff:ff:ff:ff:ff:ff
[ 198.923836] ieee80211 phy1: U iwl_send_add_sta Adding sta 15 (ff:ff:ff:ff:ff:ff) synchronously
[ 198.923839] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 198.923840] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA
[ 198.923843] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x042C, 96 bytes at 44[12]:4
[ 198.923914] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA
[ 198.923919] ieee80211 phy1: U iwl_process_add_sta_resp Processing response for adding station 15
[ 198.923921] ieee80211 phy1: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 198.923923] ieee80211 phy1: U iwl_sta_ucode_activate Added STA id 15 addr ff:ff:ff:ff:ff:ff to uCode
[ 198.923925] ieee80211 phy1: U iwl_process_add_sta_resp Added station id 15 addr ff:ff:ff:ff:ff:ff
[ 198.923928] ieee80211 phy1: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 198.923931] ieee80211 phy1: U is_lq_table_valid Channel 1 is not an HT channel
[ 198.923933] ieee80211 phy1: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_LINK_QUALITY_CMD
[ 198.923935] ieee80211 phy1: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
[ 198.923938] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_TX_LINK_QUALITY_CMD (#4e), seq: 0x042D, 92 bytes at 45[13]:4
[ 198.923974] ieee80211 phy1: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
[ 198.923978] ieee80211 phy1: U iwl_send_lq_cmd init LQ command complete, clearing sta addition status for sta 15
[ 198.923980] ieee80211 phy1: U iwl_restore_stations Restoring all known stations .... complete.
[ 198.923983] ieee80211 phy1: U iwl_print_rx_config_cmd RX CONFIG:
[ 198.923985] iwl data: 00000000: 00 21 5d b3 d0 88 00 00 00 00 00 00 00 00 00 00 .!].............
[ 198.923987] iwl data: 00000010: 00 00 00 00 00 00 00 00 03 00 06 24 15 03 00 00 ...........$....
[ 198.923989] iwl data: 00000020: 05 80 00 00 04 00 00 00 01 00 ff ff ff 00 00 00 ................
[ 198.923991] iwl data: 00000030: 00 00 ..
[ 198.923993] ieee80211 phy1: U iwl_print_rx_config_cmd u16 channel: 0x1
[ 198.923995] ieee80211 phy1: U iwl_print_rx_config_cmd u32 flags: 0x00008005
[ 198.923997] ieee80211 phy1: U iwl_print_rx_config_cmd u32 filter_flags: 0x00000004
[ 198.923998] ieee80211 phy1: U iwl_print_rx_config_cmd u8 dev_type: 0x3
[ 198.924011] ieee80211 phy1: U iwl_print_rx_config_cmd u8 ofdm_basic_rates: 0x15
[ 198.924013] ieee80211 phy1: U iwl_print_rx_config_cmd u8 cck_basic_rates: 0x03
[ 198.924015] ieee80211 phy1: U iwl_print_rx_config_cmd u8[6] node_addr: 00:21:5d:b3:d0:88
[ 198.924017] ieee80211 phy1: U iwl_print_rx_config_cmd u8[6] bssid_addr: 00:00:00:00:00:00
[ 198.924018] ieee80211 phy1: U iwl_print_rx_config_cmd u16 assoc_id: 0x0
[ 198.924023] ieee80211 phy1: U iwl_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x042E, 8 bytes at 46[14]:4
[ 198.924122] ieee80211 phy1: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: iwlagn fails to associate on 2.6.36-rc2
2010-08-23 14:14 ` Christoph Hellwig
@ 2010-08-23 14:42 ` Guy, Wey-Yi
2010-08-23 16:32 ` Christoph Hellwig
0 siblings, 1 reply; 13+ messages in thread
From: Guy, Wey-Yi @ 2010-08-23 14:42 UTC (permalink / raw)
To: Christoph Hellwig; +Cc: linux-wireless
On Mon, 2010-08-23 at 07:14 -0700, Christoph Hellwig wrote:
> On Mon, Aug 23, 2010 at 07:11:21AM -0700, Guy, Wey-Yi wrote:
> > it is kind of strange, the connection can stay if you have background
> > ping going?
>
> Yes (that's on a kernel up to 2.6.35). Otherwise it drops a lot, up
> to ca 2.6.32 it kept working. See the linux-wireless archives for my
> report from back then.
>
> > could you give more description on your problem, band/channel/...
> > you also can turn on the debug flag debug=0x43fff to capture the current
> > status of iwlwifi. it do require you compile kernel with full debugging
> > support.
>
> I don't know what you mean with full kernel debugging. iwlagn
> debugging, mac80211 debugging? Just tell me the options and I'll run
> with it.
Turn both iwlagn anf mac80211 debugging on when you compile kernel and
use debug=0x43fff when you load the iwlagn module
Thanks
Wey
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: iwlagn fails to associate on 2.6.36-rc2
2010-08-23 14:11 ` Guy, Wey-Yi
@ 2010-08-23 14:14 ` Christoph Hellwig
2010-08-23 14:42 ` Guy, Wey-Yi
0 siblings, 1 reply; 13+ messages in thread
From: Christoph Hellwig @ 2010-08-23 14:14 UTC (permalink / raw)
To: Guy, Wey-Yi; +Cc: Christoph Hellwig, linux-wireless
On Mon, Aug 23, 2010 at 07:11:21AM -0700, Guy, Wey-Yi wrote:
> it is kind of strange, the connection can stay if you have background
> ping going?
Yes (that's on a kernel up to 2.6.35). Otherwise it drops a lot, up
to ca 2.6.32 it kept working. See the linux-wireless archives for my
report from back then.
> could you give more description on your problem, band/channel/...
> you also can turn on the debug flag debug=0x43fff to capture the current
> status of iwlwifi. it do require you compile kernel with full debugging
> support.
I don't know what you mean with full kernel debugging. iwlagn
debugging, mac80211 debugging? Just tell me the options and I'll run
with it.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: iwlagn fails to associate on 2.6.36-rc2
2010-08-23 11:02 Christoph Hellwig
@ 2010-08-23 14:11 ` Guy, Wey-Yi
2010-08-23 14:14 ` Christoph Hellwig
0 siblings, 1 reply; 13+ messages in thread
From: Guy, Wey-Yi @ 2010-08-23 14:11 UTC (permalink / raw)
To: Christoph Hellwig; +Cc: linux-wireless
On Mon, 2010-08-23 at 04:02 -0700, Christoph Hellwig wrote:
> I just tried to boot into 2.6.36-rc2 and now the Intel 5100 controller
> in my Thinkpad T500 fails to associate with my cheap Netgear access
> point. Note that this is the same setup that already has problems
> staying associated for a few kernel releases unless I keep a background
> ping running.
>
> Any good way to debug this? There haven't been any interesting messages
> in the kernel log.
it is kind of strange, the connection can stay if you have background
ping going?
could you give more description on your problem, band/channel/...
you also can turn on the debug flag debug=0x43fff to capture the current
status of iwlwifi. it do require you compile kernel with full debugging
support.
Thanks
Wey
^ permalink raw reply [flat|nested] 13+ messages in thread
* iwlagn fails to associate on 2.6.36-rc2
@ 2010-08-23 11:02 Christoph Hellwig
2010-08-23 14:11 ` Guy, Wey-Yi
0 siblings, 1 reply; 13+ messages in thread
From: Christoph Hellwig @ 2010-08-23 11:02 UTC (permalink / raw)
To: linux-wireless
I just tried to boot into 2.6.36-rc2 and now the Intel 5100 controller
in my Thinkpad T500 fails to associate with my cheap Netgear access
point. Note that this is the same setup that already has problems
staying associated for a few kernel releases unless I keep a background
ping running.
Any good way to debug this? There haven't been any interesting messages
in the kernel log.
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2010-08-28 0:03 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-08-24 22:47 iwlagn fails to associate on 2.6.36-rc2 lance lassetter
2010-08-25 7:35 ` Johannes Berg
2010-08-28 0:03 ` lance lassetter
-- strict thread matches above, loose matches on Subject: below --
2010-08-23 11:02 Christoph Hellwig
2010-08-23 14:11 ` Guy, Wey-Yi
2010-08-23 14:14 ` Christoph Hellwig
2010-08-23 14:42 ` Guy, Wey-Yi
2010-08-23 16:32 ` Christoph Hellwig
2010-08-23 17:00 ` Guy, Wey-Yi
2010-08-23 19:32 ` Christoph Hellwig
2010-08-23 19:34 ` Guy, Wey-Yi
2010-08-24 1:03 ` lance lassetter
2010-08-24 7:51 ` Johannes Berg
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.