* [PATCH 1a/33] (resend) bfa:(Cleanup Patch) Remove the include subdir and flatten BFA.
@ 2010-09-16 18:35 kgudipat
0 siblings, 0 replies; only message in thread
From: kgudipat @ 2010-09-16 18:35 UTC (permalink / raw)
To: James.Bottomley, revers, linux-scsi
Cc: huangj, vravindr, rvadivel, amathur, adapter_linux_open_src_team,
Krishna Gudipati
From: Krishna Gudipati <kgudipat@brocade.com>
Resending the patch 1/33 by splitting it into two patches 1a and 1b,
as its not showing up in the linux-scsi mailing list, due to its size.
Change details:
- This patch is part of the BFA cleanup.
- Removed the include subdir under BFA and flattened the hierarchy.
- The .h files under include will be handled as below:
Files under:
- AEN - Will be removed.
- BFI - Cleaned up BFA to FW interface header files bfi.h, bfi_ms.h,
bfi_cbreg.h & bfi_ctreg.h will be merged to top-level BFA dir.
- CNA - Only file bfa_port.h will be merged to top-level BFA.
- LOG - Will be removed, using native logging.
- Protocol - Will be removed, some needed stuff merged to bfa_fc.h and moved
to top-level BFA.
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
---
drivers/scsi/bfa/include/aen/bfa_aen.h | 96 --
drivers/scsi/bfa/include/aen/bfa_aen_adapter.h | 31 -
drivers/scsi/bfa/include/aen/bfa_aen_audit.h | 31 -
drivers/scsi/bfa/include/aen/bfa_aen_ethport.h | 35 -
drivers/scsi/bfa/include/aen/bfa_aen_ioc.h | 45 -
drivers/scsi/bfa/include/aen/bfa_aen_itnim.h | 33 -
drivers/scsi/bfa/include/aen/bfa_aen_lport.h | 51 -
drivers/scsi/bfa/include/aen/bfa_aen_port.h | 57 -
drivers/scsi/bfa/include/aen/bfa_aen_rport.h | 37 -
drivers/scsi/bfa/include/bfi/bfi.h | 174 --
drivers/scsi/bfa/include/bfi/bfi_boot.h | 34 -
drivers/scsi/bfa/include/bfi/bfi_cbreg.h | 319 ----
drivers/scsi/bfa/include/bfi/bfi_cee.h | 119 --
drivers/scsi/bfa/include/bfi/bfi_ctreg.h | 640 --------
drivers/scsi/bfa/include/bfi/bfi_fabric.h | 92 --
drivers/scsi/bfa/include/bfi/bfi_fcpim.h | 301 ----
drivers/scsi/bfa/include/bfi/bfi_fcxp.h | 71 -
drivers/scsi/bfa/include/bfi/bfi_ioc.h | 208 ---
drivers/scsi/bfa/include/bfi/bfi_iocfc.h | 179 ---
drivers/scsi/bfa/include/bfi/bfi_lport.h | 89 --
drivers/scsi/bfa/include/bfi/bfi_lps.h | 104 --
drivers/scsi/bfa/include/bfi/bfi_pbc.h | 62 -
drivers/scsi/bfa/include/bfi/bfi_port.h | 115 --
drivers/scsi/bfa/include/bfi/bfi_pport.h | 118 --
drivers/scsi/bfa/include/bfi/bfi_rport.h | 104 --
drivers/scsi/bfa/include/bfi/bfi_uf.h | 52 -
drivers/scsi/bfa/include/cna/bfa_cna_trcmod.h | 40 -
drivers/scsi/bfa/include/cna/cee/bfa_cee.h | 77 -
drivers/scsi/bfa/include/cna/port/bfa_port.h | 70 -
drivers/scsi/bfa/include/cna/pstats/ethport_defs.h | 36 -
drivers/scsi/bfa/include/cna/pstats/phyport_defs.h | 218 ---
drivers/scsi/bfa/include/cs/bfa_checksum.h | 60 -
drivers/scsi/bfa/include/cs/bfa_debug.h | 45 -
drivers/scsi/bfa/include/cs/bfa_log.h | 184 ---
drivers/scsi/bfa/include/cs/bfa_perf.h | 34 -
drivers/scsi/bfa/include/cs/bfa_plog.h | 167 --
drivers/scsi/bfa/include/cs/bfa_q.h | 81 -
drivers/scsi/bfa/include/cs/bfa_sm.h | 77 -
drivers/scsi/bfa/include/cs/bfa_trc.h | 176 ---
drivers/scsi/bfa/include/cs/bfa_wc.h | 68 -
drivers/scsi/bfa/include/log/bfa_log_fcs.h | 28 -
drivers/scsi/bfa/include/log/bfa_log_hal.h | 36 -
drivers/scsi/bfa/include/log/bfa_log_linux.h | 62 -
drivers/scsi/bfa/include/log/bfa_log_wdrv.h | 36 -
drivers/scsi/bfa/include/protocol/ct.h | 492 ------
drivers/scsi/bfa/include/protocol/fc.h | 1111 -------------
drivers/scsi/bfa/include/protocol/fc_sp.h | 224 ---
drivers/scsi/bfa/include/protocol/fcp.h | 184 ---
drivers/scsi/bfa/include/protocol/fdmi.h | 163 --
drivers/scsi/bfa/include/protocol/scsi.h | 1648 --------------------
drivers/scsi/bfa/include/protocol/types.h | 42 -
51 files changed, 0 insertions(+), 8556 deletions(-)
delete mode 100644 drivers/scsi/bfa/include/aen/bfa_aen.h
delete mode 100644 drivers/scsi/bfa/include/aen/bfa_aen_adapter.h
delete mode 100644 drivers/scsi/bfa/include/aen/bfa_aen_audit.h
delete mode 100644 drivers/scsi/bfa/include/aen/bfa_aen_ethport.h
delete mode 100644 drivers/scsi/bfa/include/aen/bfa_aen_ioc.h
delete mode 100644 drivers/scsi/bfa/include/aen/bfa_aen_itnim.h
delete mode 100644 drivers/scsi/bfa/include/aen/bfa_aen_lport.h
delete mode 100644 drivers/scsi/bfa/include/aen/bfa_aen_port.h
delete mode 100644 drivers/scsi/bfa/include/aen/bfa_aen_rport.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_boot.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_cbreg.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_cee.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_ctreg.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_fabric.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_fcpim.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_fcxp.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_ioc.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_iocfc.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_lport.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_lps.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_pbc.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_port.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_pport.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_rport.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_uf.h
delete mode 100644 drivers/scsi/bfa/include/cna/bfa_cna_trcmod.h
delete mode 100644 drivers/scsi/bfa/include/cna/cee/bfa_cee.h
delete mode 100644 drivers/scsi/bfa/include/cna/port/bfa_port.h
delete mode 100644 drivers/scsi/bfa/include/cna/pstats/ethport_defs.h
delete mode 100644 drivers/scsi/bfa/include/cna/pstats/phyport_defs.h
delete mode 100644 drivers/scsi/bfa/include/cs/bfa_checksum.h
delete mode 100644 drivers/scsi/bfa/include/cs/bfa_debug.h
delete mode 100644 drivers/scsi/bfa/include/cs/bfa_log.h
delete mode 100644 drivers/scsi/bfa/include/cs/bfa_perf.h
delete mode 100644 drivers/scsi/bfa/include/cs/bfa_plog.h
delete mode 100644 drivers/scsi/bfa/include/cs/bfa_q.h
delete mode 100644 drivers/scsi/bfa/include/cs/bfa_sm.h
delete mode 100644 drivers/scsi/bfa/include/cs/bfa_trc.h
delete mode 100644 drivers/scsi/bfa/include/cs/bfa_wc.h
delete mode 100644 drivers/scsi/bfa/include/log/bfa_log_fcs.h
delete mode 100644 drivers/scsi/bfa/include/log/bfa_log_hal.h
delete mode 100644 drivers/scsi/bfa/include/log/bfa_log_linux.h
delete mode 100644 drivers/scsi/bfa/include/log/bfa_log_wdrv.h
delete mode 100644 drivers/scsi/bfa/include/protocol/ct.h
delete mode 100644 drivers/scsi/bfa/include/protocol/fc.h
delete mode 100644 drivers/scsi/bfa/include/protocol/fc_sp.h
delete mode 100644 drivers/scsi/bfa/include/protocol/fcp.h
delete mode 100644 drivers/scsi/bfa/include/protocol/fdmi.h
delete mode 100644 drivers/scsi/bfa/include/protocol/scsi.h
delete mode 100644 drivers/scsi/bfa/include/protocol/types.h
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen.h b/drivers/scsi/bfa/include/aen/bfa_aen.h
deleted file mode 100644
index 6abbab0..0000000
--- a/drivers/scsi/bfa/include/aen/bfa_aen.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-#ifndef __BFA_AEN_H__
-#define __BFA_AEN_H__
-
-#include "defs/bfa_defs_aen.h"
-#include "defs/bfa_defs_status.h"
-#include "cs/bfa_debug.h"
-
-#define BFA_AEN_MAX_ENTRY 512
-
-extern int bfa_aen_max_cfg_entry;
-struct bfa_aen_s {
- void *bfad;
- int max_entry;
- int write_index;
- int read_index;
- int bfad_num;
- int seq_num;
- void (*aen_cb_notify)(void *bfad);
- void (*gettimeofday)(struct bfa_timeval_s *tv);
- struct bfa_trc_mod_s *trcmod;
- int app_ri[BFA_AEN_MAX_APP]; /* For multiclient support */
- struct bfa_aen_entry_s list[BFA_AEN_MAX_ENTRY]; /* Must be the last */
-};
-
-
-/**
- * Public APIs
- */
-static inline void
-bfa_aen_set_max_cfg_entry(int max_entry)
-{
- bfa_aen_max_cfg_entry = max_entry;
-}
-
-static inline int
-bfa_aen_get_max_cfg_entry(void)
-{
- return bfa_aen_max_cfg_entry;
-}
-
-static inline int
-bfa_aen_get_meminfo(void)
-{
- return sizeof(struct bfa_aen_entry_s) * bfa_aen_get_max_cfg_entry();
-}
-
-static inline int
-bfa_aen_get_wi(struct bfa_aen_s *aen)
-{
- return aen->write_index;
-}
-
-static inline int
-bfa_aen_get_ri(struct bfa_aen_s *aen)
-{
- return aen->read_index;
-}
-
-static inline int
-bfa_aen_fetch_count(struct bfa_aen_s *aen, enum bfa_aen_app app_id)
-{
- bfa_assert((app_id < BFA_AEN_MAX_APP) && (app_id >= bfa_aen_app_bcu));
- return ((aen->write_index + aen->max_entry) - aen->app_ri[app_id])
- % aen->max_entry;
-}
-
-int bfa_aen_init(struct bfa_aen_s *aen, struct bfa_trc_mod_s *trcmod,
- void *bfad, int bfad_num, void (*aen_cb_notify)(void *),
- void (*gettimeofday)(struct bfa_timeval_s *));
-
-void bfa_aen_post(struct bfa_aen_s *aen, enum bfa_aen_category aen_category,
- int aen_type, union bfa_aen_data_u *aen_data);
-
-bfa_status_t bfa_aen_fetch(struct bfa_aen_s *aen,
- struct bfa_aen_entry_s *aen_entry,
- int entry_req, enum bfa_aen_app app_id, int *entry_ret);
-
-int bfa_aen_get_inst(struct bfa_aen_s *aen);
-
-#endif /* __BFA_AEN_H__ */
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_adapter.h b/drivers/scsi/bfa/include/aen/bfa_aen_adapter.h
deleted file mode 100644
index 260d3ea..0000000
--- a/drivers/scsi/bfa/include/aen/bfa_aen_adapter.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/* messages define for BFA_AEN_CAT_ADAPTER Module */
-#ifndef __bfa_aen_adapter_h__
-#define __bfa_aen_adapter_h__
-
-#include <cs/bfa_log.h>
-#include <defs/bfa_defs_aen.h>
-
-#define BFA_AEN_ADAPTER_ADD \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_ADAPTER, BFA_ADAPTER_AEN_ADD)
-#define BFA_AEN_ADAPTER_REMOVE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_ADAPTER, BFA_ADAPTER_AEN_REMOVE)
-
-#endif
-
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_audit.h b/drivers/scsi/bfa/include/aen/bfa_aen_audit.h
deleted file mode 100644
index 12cd7aa..0000000
--- a/drivers/scsi/bfa/include/aen/bfa_aen_audit.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/* messages define for BFA_AEN_CAT_AUDIT Module */
-#ifndef __bfa_aen_audit_h__
-#define __bfa_aen_audit_h__
-
-#include <cs/bfa_log.h>
-#include <defs/bfa_defs_aen.h>
-
-#define BFA_AEN_AUDIT_AUTH_ENABLE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_AUDIT, BFA_AUDIT_AEN_AUTH_ENABLE)
-#define BFA_AEN_AUDIT_AUTH_DISABLE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_AUDIT, BFA_AUDIT_AEN_AUTH_DISABLE)
-
-#endif
-
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_ethport.h b/drivers/scsi/bfa/include/aen/bfa_aen_ethport.h
deleted file mode 100644
index 507d0b5..0000000
--- a/drivers/scsi/bfa/include/aen/bfa_aen_ethport.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/* messages define for BFA_AEN_CAT_ETHPORT Module */
-#ifndef __bfa_aen_ethport_h__
-#define __bfa_aen_ethport_h__
-
-#include <cs/bfa_log.h>
-#include <defs/bfa_defs_aen.h>
-
-#define BFA_AEN_ETHPORT_LINKUP \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_ETHPORT, BFA_ETHPORT_AEN_LINKUP)
-#define BFA_AEN_ETHPORT_LINKDOWN \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_ETHPORT, BFA_ETHPORT_AEN_LINKDOWN)
-#define BFA_AEN_ETHPORT_ENABLE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_ETHPORT, BFA_ETHPORT_AEN_ENABLE)
-#define BFA_AEN_ETHPORT_DISABLE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_ETHPORT, BFA_ETHPORT_AEN_DISABLE)
-
-#endif
-
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_ioc.h b/drivers/scsi/bfa/include/aen/bfa_aen_ioc.h
deleted file mode 100644
index 4daf96f..0000000
--- a/drivers/scsi/bfa/include/aen/bfa_aen_ioc.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/* messages define for BFA_AEN_CAT_IOC Module */
-#ifndef __bfa_aen_ioc_h__
-#define __bfa_aen_ioc_h__
-
-#include <cs/bfa_log.h>
-#include <defs/bfa_defs_aen.h>
-
-#define BFA_AEN_IOC_HBGOOD \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_HBGOOD)
-#define BFA_AEN_IOC_HBFAIL \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_HBFAIL)
-#define BFA_AEN_IOC_ENABLE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_ENABLE)
-#define BFA_AEN_IOC_DISABLE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_DISABLE)
-#define BFA_AEN_IOC_FWMISMATCH \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_FWMISMATCH)
-#define BFA_AEN_IOC_FWCFG_ERROR \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_FWCFG_ERROR)
-#define BFA_AEN_IOC_INVALID_VENDOR \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_INVALID_VENDOR)
-#define BFA_AEN_IOC_INVALID_NWWN \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_INVALID_NWWN)
-#define BFA_AEN_IOC_INVALID_PWWN \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_INVALID_PWWN)
-
-#endif
-
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_itnim.h b/drivers/scsi/bfa/include/aen/bfa_aen_itnim.h
deleted file mode 100644
index a7d8ddc..0000000
--- a/drivers/scsi/bfa/include/aen/bfa_aen_itnim.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/* messages define for BFA_AEN_CAT_ITNIM Module */
-#ifndef __bfa_aen_itnim_h__
-#define __bfa_aen_itnim_h__
-
-#include <cs/bfa_log.h>
-#include <defs/bfa_defs_aen.h>
-
-#define BFA_AEN_ITNIM_ONLINE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_ITNIM, BFA_ITNIM_AEN_ONLINE)
-#define BFA_AEN_ITNIM_OFFLINE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_ITNIM, BFA_ITNIM_AEN_OFFLINE)
-#define BFA_AEN_ITNIM_DISCONNECT \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_ITNIM, BFA_ITNIM_AEN_DISCONNECT)
-
-#endif
-
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_lport.h b/drivers/scsi/bfa/include/aen/bfa_aen_lport.h
deleted file mode 100644
index 5a8ebb6..0000000
--- a/drivers/scsi/bfa/include/aen/bfa_aen_lport.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/* messages define for BFA_AEN_CAT_LPORT Module */
-#ifndef __bfa_aen_lport_h__
-#define __bfa_aen_lport_h__
-
-#include <cs/bfa_log.h>
-#include <defs/bfa_defs_aen.h>
-
-#define BFA_AEN_LPORT_NEW \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NEW)
-#define BFA_AEN_LPORT_DELETE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_DELETE)
-#define BFA_AEN_LPORT_ONLINE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_ONLINE)
-#define BFA_AEN_LPORT_OFFLINE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_OFFLINE)
-#define BFA_AEN_LPORT_DISCONNECT \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_DISCONNECT)
-#define BFA_AEN_LPORT_NEW_PROP \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NEW_PROP)
-#define BFA_AEN_LPORT_DELETE_PROP \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_DELETE_PROP)
-#define BFA_AEN_LPORT_NEW_STANDARD \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NEW_STANDARD)
-#define BFA_AEN_LPORT_DELETE_STANDARD \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_DELETE_STANDARD)
-#define BFA_AEN_LPORT_NPIV_DUP_WWN \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NPIV_DUP_WWN)
-#define BFA_AEN_LPORT_NPIV_FABRIC_MAX \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NPIV_FABRIC_MAX)
-#define BFA_AEN_LPORT_NPIV_UNKNOWN \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NPIV_UNKNOWN)
-
-#endif
-
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_port.h b/drivers/scsi/bfa/include/aen/bfa_aen_port.h
deleted file mode 100644
index 9add905..0000000
--- a/drivers/scsi/bfa/include/aen/bfa_aen_port.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/* messages define for BFA_AEN_CAT_PORT Module */
-#ifndef __bfa_aen_port_h__
-#define __bfa_aen_port_h__
-
-#include <cs/bfa_log.h>
-#include <defs/bfa_defs_aen.h>
-
-#define BFA_AEN_PORT_ONLINE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_ONLINE)
-#define BFA_AEN_PORT_OFFLINE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_OFFLINE)
-#define BFA_AEN_PORT_RLIR \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_RLIR)
-#define BFA_AEN_PORT_SFP_INSERT \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_INSERT)
-#define BFA_AEN_PORT_SFP_REMOVE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_REMOVE)
-#define BFA_AEN_PORT_SFP_POM \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_POM)
-#define BFA_AEN_PORT_ENABLE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_ENABLE)
-#define BFA_AEN_PORT_DISABLE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_DISABLE)
-#define BFA_AEN_PORT_AUTH_ON \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_AUTH_ON)
-#define BFA_AEN_PORT_AUTH_OFF \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_AUTH_OFF)
-#define BFA_AEN_PORT_DISCONNECT \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_DISCONNECT)
-#define BFA_AEN_PORT_QOS_NEG \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_QOS_NEG)
-#define BFA_AEN_PORT_FABRIC_NAME_CHANGE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_FABRIC_NAME_CHANGE)
-#define BFA_AEN_PORT_SFP_ACCESS_ERROR \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_ACCESS_ERROR)
-#define BFA_AEN_PORT_SFP_UNSUPPORT \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_UNSUPPORT)
-
-#endif
-
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_rport.h b/drivers/scsi/bfa/include/aen/bfa_aen_rport.h
deleted file mode 100644
index 7e4be1f..0000000
--- a/drivers/scsi/bfa/include/aen/bfa_aen_rport.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/* messages define for BFA_AEN_CAT_RPORT Module */
-#ifndef __bfa_aen_rport_h__
-#define __bfa_aen_rport_h__
-
-#include <cs/bfa_log.h>
-#include <defs/bfa_defs_aen.h>
-
-#define BFA_AEN_RPORT_ONLINE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_ONLINE)
-#define BFA_AEN_RPORT_OFFLINE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_OFFLINE)
-#define BFA_AEN_RPORT_DISCONNECT \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_DISCONNECT)
-#define BFA_AEN_RPORT_QOS_PRIO \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_QOS_PRIO)
-#define BFA_AEN_RPORT_QOS_FLOWID \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_QOS_FLOWID)
-
-#endif
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi.h b/drivers/scsi/bfa/include/bfi/bfi.h
deleted file mode 100644
index a550e80..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFI_H__
-#define __BFI_H__
-
-#include <bfa_os_inc.h>
-#include <defs/bfa_defs_status.h>
-
-#pragma pack(1)
-
-/**
- * Msg header common to all msgs
- */
-struct bfi_mhdr_s {
- u8 msg_class; /* @ref bfi_mclass_t */
- u8 msg_id; /* msg opcode with in the class */
- union {
- struct {
- u8 rsvd;
- u8 lpu_id; /* msg destination */
- } h2i;
- u16 i2htok; /* token in msgs to host */
- } mtag;
-};
-
-#define bfi_h2i_set(_mh, _mc, _op, _lpuid) do { \
- (_mh).msg_class = (_mc); \
- (_mh).msg_id = (_op); \
- (_mh).mtag.h2i.lpu_id = (_lpuid); \
-} while (0)
-
-#define bfi_i2h_set(_mh, _mc, _op, _i2htok) do { \
- (_mh).msg_class = (_mc); \
- (_mh).msg_id = (_op); \
- (_mh).mtag.i2htok = (_i2htok); \
-} while (0)
-
-/*
- * Message opcodes: 0-127 to firmware, 128-255 to host
- */
-#define BFI_I2H_OPCODE_BASE 128
-#define BFA_I2HM(_x) ((_x) + BFI_I2H_OPCODE_BASE)
-
-/**
- ****************************************************************************
- *
- * Scatter Gather Element and Page definition
- *
- ****************************************************************************
- */
-
-#define BFI_SGE_INLINE 1
-#define BFI_SGE_INLINE_MAX (BFI_SGE_INLINE + 1)
-
-/**
- * SG Flags
- */
-enum {
- BFI_SGE_DATA = 0, /* data address, not last */
- BFI_SGE_DATA_CPL = 1, /* data addr, last in current page */
- BFI_SGE_DATA_LAST = 3, /* data address, last */
- BFI_SGE_LINK = 2, /* link address */
- BFI_SGE_PGDLEN = 2, /* cumulative data length for page */
-};
-
-/**
- * DMA addresses
- */
-union bfi_addr_u {
- struct {
- u32 addr_lo;
- u32 addr_hi;
- } a32;
-};
-
-/**
- * Scatter Gather Element
- */
-struct bfi_sge_s {
-#ifdef __BIGENDIAN
- u32 flags:2,
- rsvd:2,
- sg_len:28;
-#else
- u32 sg_len:28,
- rsvd:2,
- flags:2;
-#endif
- union bfi_addr_u sga;
-};
-
-/**
- * Scatter Gather Page
- */
-#define BFI_SGPG_DATA_SGES 7
-#define BFI_SGPG_SGES_MAX (BFI_SGPG_DATA_SGES + 1)
-#define BFI_SGPG_RSVD_WD_LEN 8
-struct bfi_sgpg_s {
- struct bfi_sge_s sges[BFI_SGPG_SGES_MAX];
- u32 rsvd[BFI_SGPG_RSVD_WD_LEN];
-};
-
-/*
- * Large Message structure - 128 Bytes size Msgs
- */
-#define BFI_LMSG_SZ 128
-#define BFI_LMSG_PL_WSZ \
- ((BFI_LMSG_SZ - sizeof(struct bfi_mhdr_s)) / 4)
-
-struct bfi_msg_s {
- struct bfi_mhdr_s mhdr;
- u32 pl[BFI_LMSG_PL_WSZ];
-};
-
-/**
- * Mailbox message structure
- */
-#define BFI_MBMSG_SZ 7
-struct bfi_mbmsg_s {
- struct bfi_mhdr_s mh;
- u32 pl[BFI_MBMSG_SZ];
-};
-
-/**
- * Message Classes
- */
-enum bfi_mclass {
- BFI_MC_IOC = 1, /* IO Controller (IOC) */
- BFI_MC_DIAG = 2, /* Diagnostic Msgs */
- BFI_MC_FLASH = 3, /* Flash message class */
- BFI_MC_CEE = 4, /* CEE */
- BFI_MC_FCPORT = 5, /* FC port */
- BFI_MC_IOCFC = 6, /* FC - IO Controller (IOC) */
- BFI_MC_LL = 7, /* Link Layer */
- BFI_MC_UF = 8, /* Unsolicited frame receive */
- BFI_MC_FCXP = 9, /* FC Transport */
- BFI_MC_LPS = 10, /* lport fc login services */
- BFI_MC_RPORT = 11, /* Remote port */
- BFI_MC_ITNIM = 12, /* I-T nexus (Initiator mode) */
- BFI_MC_IOIM_READ = 13, /* read IO (Initiator mode) */
- BFI_MC_IOIM_WRITE = 14, /* write IO (Initiator mode) */
- BFI_MC_IOIM_IO = 15, /* IO (Initiator mode) */
- BFI_MC_IOIM = 16, /* IO (Initiator mode) */
- BFI_MC_IOIM_IOCOM = 17, /* good IO completion */
- BFI_MC_TSKIM = 18, /* Initiator Task management */
- BFI_MC_SBOOT = 19, /* SAN boot services */
- BFI_MC_IPFC = 20, /* IP over FC Msgs */
- BFI_MC_PORT = 21, /* Physical port */
- BFI_MC_MAX = 32
-};
-
-#define BFI_IOC_MAX_CQS 4
-#define BFI_IOC_MAX_CQS_ASIC 8
-#define BFI_IOC_MSGLEN_MAX 32 /* 32 bytes */
-
-#pragma pack()
-
-#endif /* __BFI_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_boot.h b/drivers/scsi/bfa/include/bfi/bfi_boot.h
deleted file mode 100644
index 5955afe..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_boot.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-/*
- * bfi_boot.h
- */
-
-#ifndef __BFI_BOOT_H__
-#define __BFI_BOOT_H__
-
-#define BFI_BOOT_TYPE_OFF 8
-#define BFI_BOOT_PARAM_OFF 12
-
-#define BFI_BOOT_TYPE_NORMAL 0 /* param is device id */
-#define BFI_BOOT_TYPE_FLASH 1
-#define BFI_BOOT_TYPE_MEMTEST 2
-
-#define BFI_BOOT_MEMTEST_RES_ADDR 0x900
-#define BFI_BOOT_MEMTEST_RES_SIG 0xA0A1A2A3
-
-#endif
diff --git a/drivers/scsi/bfa/include/bfi/bfi_cbreg.h b/drivers/scsi/bfa/include/bfi/bfi_cbreg.h
deleted file mode 100644
index a51ee61..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_cbreg.h
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/*
- * bfi_cbreg.h crossbow host block register definitions
- *
- * !!! Do not edit. Auto generated. !!!
- */
-
-#ifndef __BFI_CBREG_H__
-#define __BFI_CBREG_H__
-
-
-#define HOSTFN0_INT_STATUS 0x00014000
-#define __HOSTFN0_INT_STATUS_LVL_MK 0x00f00000
-#define __HOSTFN0_INT_STATUS_LVL_SH 20
-#define __HOSTFN0_INT_STATUS_LVL(_v) ((_v) << __HOSTFN0_INT_STATUS_LVL_SH)
-#define __HOSTFN0_INT_STATUS_P 0x000fffff
-#define HOSTFN0_INT_MSK 0x00014004
-#define HOST_PAGE_NUM_FN0 0x00014008
-#define __HOST_PAGE_NUM_FN 0x000001ff
-#define HOSTFN1_INT_STATUS 0x00014100
-#define __HOSTFN1_INT_STAT_LVL_MK 0x00f00000
-#define __HOSTFN1_INT_STAT_LVL_SH 20
-#define __HOSTFN1_INT_STAT_LVL(_v) ((_v) << __HOSTFN1_INT_STAT_LVL_SH)
-#define __HOSTFN1_INT_STAT_P 0x000fffff
-#define HOSTFN1_INT_MSK 0x00014104
-#define HOST_PAGE_NUM_FN1 0x00014108
-#define APP_PLL_400_CTL_REG 0x00014204
-#define __P_400_PLL_LOCK 0x80000000
-#define __APP_PLL_400_SRAM_USE_100MHZ 0x00100000
-#define __APP_PLL_400_RESET_TIMER_MK 0x000e0000
-#define __APP_PLL_400_RESET_TIMER_SH 17
-#define __APP_PLL_400_RESET_TIMER(_v) ((_v) << __APP_PLL_400_RESET_TIMER_SH)
-#define __APP_PLL_400_LOGIC_SOFT_RESET 0x00010000
-#define __APP_PLL_400_CNTLMT0_1_MK 0x0000c000
-#define __APP_PLL_400_CNTLMT0_1_SH 14
-#define __APP_PLL_400_CNTLMT0_1(_v) ((_v) << __APP_PLL_400_CNTLMT0_1_SH)
-#define __APP_PLL_400_JITLMT0_1_MK 0x00003000
-#define __APP_PLL_400_JITLMT0_1_SH 12
-#define __APP_PLL_400_JITLMT0_1(_v) ((_v) << __APP_PLL_400_JITLMT0_1_SH)
-#define __APP_PLL_400_HREF 0x00000800
-#define __APP_PLL_400_HDIV 0x00000400
-#define __APP_PLL_400_P0_1_MK 0x00000300
-#define __APP_PLL_400_P0_1_SH 8
-#define __APP_PLL_400_P0_1(_v) ((_v) << __APP_PLL_400_P0_1_SH)
-#define __APP_PLL_400_Z0_2_MK 0x000000e0
-#define __APP_PLL_400_Z0_2_SH 5
-#define __APP_PLL_400_Z0_2(_v) ((_v) << __APP_PLL_400_Z0_2_SH)
-#define __APP_PLL_400_RSEL200500 0x00000010
-#define __APP_PLL_400_ENARST 0x00000008
-#define __APP_PLL_400_BYPASS 0x00000004
-#define __APP_PLL_400_LRESETN 0x00000002
-#define __APP_PLL_400_ENABLE 0x00000001
-#define APP_PLL_212_CTL_REG 0x00014208
-#define __P_212_PLL_LOCK 0x80000000
-#define __APP_PLL_212_RESET_TIMER_MK 0x000e0000
-#define __APP_PLL_212_RESET_TIMER_SH 17
-#define __APP_PLL_212_RESET_TIMER(_v) ((_v) << __APP_PLL_212_RESET_TIMER_SH)
-#define __APP_PLL_212_LOGIC_SOFT_RESET 0x00010000
-#define __APP_PLL_212_CNTLMT0_1_MK 0x0000c000
-#define __APP_PLL_212_CNTLMT0_1_SH 14
-#define __APP_PLL_212_CNTLMT0_1(_v) ((_v) << __APP_PLL_212_CNTLMT0_1_SH)
-#define __APP_PLL_212_JITLMT0_1_MK 0x00003000
-#define __APP_PLL_212_JITLMT0_1_SH 12
-#define __APP_PLL_212_JITLMT0_1(_v) ((_v) << __APP_PLL_212_JITLMT0_1_SH)
-#define __APP_PLL_212_HREF 0x00000800
-#define __APP_PLL_212_HDIV 0x00000400
-#define __APP_PLL_212_P0_1_MK 0x00000300
-#define __APP_PLL_212_P0_1_SH 8
-#define __APP_PLL_212_P0_1(_v) ((_v) << __APP_PLL_212_P0_1_SH)
-#define __APP_PLL_212_Z0_2_MK 0x000000e0
-#define __APP_PLL_212_Z0_2_SH 5
-#define __APP_PLL_212_Z0_2(_v) ((_v) << __APP_PLL_212_Z0_2_SH)
-#define __APP_PLL_212_RSEL200500 0x00000010
-#define __APP_PLL_212_ENARST 0x00000008
-#define __APP_PLL_212_BYPASS 0x00000004
-#define __APP_PLL_212_LRESETN 0x00000002
-#define __APP_PLL_212_ENABLE 0x00000001
-#define HOST_SEM0_REG 0x00014230
-#define __HOST_SEMAPHORE 0x00000001
-#define HOST_SEM1_REG 0x00014234
-#define HOST_SEM2_REG 0x00014238
-#define HOST_SEM3_REG 0x0001423c
-#define HOST_SEM0_INFO_REG 0x00014240
-#define HOST_SEM1_INFO_REG 0x00014244
-#define HOST_SEM2_INFO_REG 0x00014248
-#define HOST_SEM3_INFO_REG 0x0001424c
-#define HOSTFN0_LPU0_CMD_STAT 0x00019000
-#define __HOSTFN0_LPU0_MBOX_INFO_MK 0xfffffffe
-#define __HOSTFN0_LPU0_MBOX_INFO_SH 1
-#define __HOSTFN0_LPU0_MBOX_INFO(_v) ((_v) << __HOSTFN0_LPU0_MBOX_INFO_SH)
-#define __HOSTFN0_LPU0_MBOX_CMD_STATUS 0x00000001
-#define LPU0_HOSTFN0_CMD_STAT 0x00019008
-#define __LPU0_HOSTFN0_MBOX_INFO_MK 0xfffffffe
-#define __LPU0_HOSTFN0_MBOX_INFO_SH 1
-#define __LPU0_HOSTFN0_MBOX_INFO(_v) ((_v) << __LPU0_HOSTFN0_MBOX_INFO_SH)
-#define __LPU0_HOSTFN0_MBOX_CMD_STATUS 0x00000001
-#define HOSTFN1_LPU1_CMD_STAT 0x00019014
-#define __HOSTFN1_LPU1_MBOX_INFO_MK 0xfffffffe
-#define __HOSTFN1_LPU1_MBOX_INFO_SH 1
-#define __HOSTFN1_LPU1_MBOX_INFO(_v) ((_v) << __HOSTFN1_LPU1_MBOX_INFO_SH)
-#define __HOSTFN1_LPU1_MBOX_CMD_STATUS 0x00000001
-#define LPU1_HOSTFN1_CMD_STAT 0x0001901c
-#define __LPU1_HOSTFN1_MBOX_INFO_MK 0xfffffffe
-#define __LPU1_HOSTFN1_MBOX_INFO_SH 1
-#define __LPU1_HOSTFN1_MBOX_INFO(_v) ((_v) << __LPU1_HOSTFN1_MBOX_INFO_SH)
-#define __LPU1_HOSTFN1_MBOX_CMD_STATUS 0x00000001
-#define CPE_Q0_DEPTH 0x00010014
-#define CPE_Q0_PI 0x0001001c
-#define CPE_Q0_CI 0x00010020
-#define CPE_Q1_DEPTH 0x00010034
-#define CPE_Q1_PI 0x0001003c
-#define CPE_Q1_CI 0x00010040
-#define CPE_Q2_DEPTH 0x00010054
-#define CPE_Q2_PI 0x0001005c
-#define CPE_Q2_CI 0x00010060
-#define CPE_Q3_DEPTH 0x00010074
-#define CPE_Q3_PI 0x0001007c
-#define CPE_Q3_CI 0x00010080
-#define CPE_Q4_DEPTH 0x00010094
-#define CPE_Q4_PI 0x0001009c
-#define CPE_Q4_CI 0x000100a0
-#define CPE_Q5_DEPTH 0x000100b4
-#define CPE_Q5_PI 0x000100bc
-#define CPE_Q5_CI 0x000100c0
-#define CPE_Q6_DEPTH 0x000100d4
-#define CPE_Q6_PI 0x000100dc
-#define CPE_Q6_CI 0x000100e0
-#define CPE_Q7_DEPTH 0x000100f4
-#define CPE_Q7_PI 0x000100fc
-#define CPE_Q7_CI 0x00010100
-#define RME_Q0_DEPTH 0x00011014
-#define RME_Q0_PI 0x0001101c
-#define RME_Q0_CI 0x00011020
-#define RME_Q1_DEPTH 0x00011034
-#define RME_Q1_PI 0x0001103c
-#define RME_Q1_CI 0x00011040
-#define RME_Q2_DEPTH 0x00011054
-#define RME_Q2_PI 0x0001105c
-#define RME_Q2_CI 0x00011060
-#define RME_Q3_DEPTH 0x00011074
-#define RME_Q3_PI 0x0001107c
-#define RME_Q3_CI 0x00011080
-#define RME_Q4_DEPTH 0x00011094
-#define RME_Q4_PI 0x0001109c
-#define RME_Q4_CI 0x000110a0
-#define RME_Q5_DEPTH 0x000110b4
-#define RME_Q5_PI 0x000110bc
-#define RME_Q5_CI 0x000110c0
-#define RME_Q6_DEPTH 0x000110d4
-#define RME_Q6_PI 0x000110dc
-#define RME_Q6_CI 0x000110e0
-#define RME_Q7_DEPTH 0x000110f4
-#define RME_Q7_PI 0x000110fc
-#define RME_Q7_CI 0x00011100
-#define PSS_CTL_REG 0x00018800
-#define __PSS_I2C_CLK_DIV_MK 0x00030000
-#define __PSS_I2C_CLK_DIV_SH 16
-#define __PSS_I2C_CLK_DIV(_v) ((_v) << __PSS_I2C_CLK_DIV_SH)
-#define __PSS_LMEM_INIT_DONE 0x00001000
-#define __PSS_LMEM_RESET 0x00000200
-#define __PSS_LMEM_INIT_EN 0x00000100
-#define __PSS_LPU1_RESET 0x00000002
-#define __PSS_LPU0_RESET 0x00000001
-#define PSS_ERR_STATUS_REG 0x00018810
-#define __PSS_LMEM1_CORR_ERR 0x00000800
-#define __PSS_LMEM0_CORR_ERR 0x00000400
-#define __PSS_LMEM1_UNCORR_ERR 0x00000200
-#define __PSS_LMEM0_UNCORR_ERR 0x00000100
-#define __PSS_BAL_PERR 0x00000080
-#define __PSS_DIP_IF_ERR 0x00000040
-#define __PSS_IOH_IF_ERR 0x00000020
-#define __PSS_TDS_IF_ERR 0x00000010
-#define __PSS_RDS_IF_ERR 0x00000008
-#define __PSS_SGM_IF_ERR 0x00000004
-#define __PSS_LPU1_RAM_ERR 0x00000002
-#define __PSS_LPU0_RAM_ERR 0x00000001
-#define ERR_SET_REG 0x00018818
-#define __PSS_ERR_STATUS_SET 0x00000fff
-
-/*
- * These definitions are either in error/missing in spec. Its auto-generated
- * from hard coded values in regparse.pl.
- */
-#define __EMPHPOST_AT_4G_MK_FIX 0x0000001c
-#define __EMPHPOST_AT_4G_SH_FIX 0x00000002
-#define __EMPHPRE_AT_4G_FIX 0x00000003
-#define __SFP_TXRATE_EN_FIX 0x00000100
-#define __SFP_RXRATE_EN_FIX 0x00000080
-
-
-/*
- * These register definitions are auto-generated from hard coded values
- * in regparse.pl.
- */
-#define HOSTFN0_LPU_MBOX0_0 0x00019200
-#define HOSTFN1_LPU_MBOX0_8 0x00019260
-#define LPU_HOSTFN0_MBOX0_0 0x00019280
-#define LPU_HOSTFN1_MBOX0_8 0x000192e0
-
-
-/*
- * These register mapping definitions are auto-generated from mapping tables
- * in regparse.pl.
- */
-#define BFA_IOC0_HBEAT_REG HOST_SEM0_INFO_REG
-#define BFA_IOC0_STATE_REG HOST_SEM1_INFO_REG
-#define BFA_IOC1_HBEAT_REG HOST_SEM2_INFO_REG
-#define BFA_IOC1_STATE_REG HOST_SEM3_INFO_REG
-#define BFA_FW_USE_COUNT HOST_SEM4_INFO_REG
-
-#define CPE_Q_DEPTH(__n) \
- (CPE_Q0_DEPTH + (__n) * (CPE_Q1_DEPTH - CPE_Q0_DEPTH))
-#define CPE_Q_PI(__n) \
- (CPE_Q0_PI + (__n) * (CPE_Q1_PI - CPE_Q0_PI))
-#define CPE_Q_CI(__n) \
- (CPE_Q0_CI + (__n) * (CPE_Q1_CI - CPE_Q0_CI))
-#define RME_Q_DEPTH(__n) \
- (RME_Q0_DEPTH + (__n) * (RME_Q1_DEPTH - RME_Q0_DEPTH))
-#define RME_Q_PI(__n) \
- (RME_Q0_PI + (__n) * (RME_Q1_PI - RME_Q0_PI))
-#define RME_Q_CI(__n) \
- (RME_Q0_CI + (__n) * (RME_Q1_CI - RME_Q0_CI))
-
-#define CPE_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
-#define RME_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
-#define CPE_Q_MASK(__q) ((__q) & 0x3)
-#define RME_Q_MASK(__q) ((__q) & 0x3)
-
-
-/*
- * PCI MSI-X vector defines
- */
-enum {
- BFA_MSIX_CPE_Q0 = 0,
- BFA_MSIX_CPE_Q1 = 1,
- BFA_MSIX_CPE_Q2 = 2,
- BFA_MSIX_CPE_Q3 = 3,
- BFA_MSIX_CPE_Q4 = 4,
- BFA_MSIX_CPE_Q5 = 5,
- BFA_MSIX_CPE_Q6 = 6,
- BFA_MSIX_CPE_Q7 = 7,
- BFA_MSIX_RME_Q0 = 8,
- BFA_MSIX_RME_Q1 = 9,
- BFA_MSIX_RME_Q2 = 10,
- BFA_MSIX_RME_Q3 = 11,
- BFA_MSIX_RME_Q4 = 12,
- BFA_MSIX_RME_Q5 = 13,
- BFA_MSIX_RME_Q6 = 14,
- BFA_MSIX_RME_Q7 = 15,
- BFA_MSIX_ERR_EMC = 16,
- BFA_MSIX_ERR_LPU0 = 17,
- BFA_MSIX_ERR_LPU1 = 18,
- BFA_MSIX_ERR_PSS = 19,
- BFA_MSIX_MBOX_LPU0 = 20,
- BFA_MSIX_MBOX_LPU1 = 21,
- BFA_MSIX_CB_MAX = 22,
-};
-
-/*
- * And corresponding host interrupt status bit field defines
- */
-#define __HFN_INT_CPE_Q0 0x00000001U
-#define __HFN_INT_CPE_Q1 0x00000002U
-#define __HFN_INT_CPE_Q2 0x00000004U
-#define __HFN_INT_CPE_Q3 0x00000008U
-#define __HFN_INT_CPE_Q4 0x00000010U
-#define __HFN_INT_CPE_Q5 0x00000020U
-#define __HFN_INT_CPE_Q6 0x00000040U
-#define __HFN_INT_CPE_Q7 0x00000080U
-#define __HFN_INT_RME_Q0 0x00000100U
-#define __HFN_INT_RME_Q1 0x00000200U
-#define __HFN_INT_RME_Q2 0x00000400U
-#define __HFN_INT_RME_Q3 0x00000800U
-#define __HFN_INT_RME_Q4 0x00001000U
-#define __HFN_INT_RME_Q5 0x00002000U
-#define __HFN_INT_RME_Q6 0x00004000U
-#define __HFN_INT_RME_Q7 0x00008000U
-#define __HFN_INT_ERR_EMC 0x00010000U
-#define __HFN_INT_ERR_LPU0 0x00020000U
-#define __HFN_INT_ERR_LPU1 0x00040000U
-#define __HFN_INT_ERR_PSS 0x00080000U
-#define __HFN_INT_MBOX_LPU0 0x00100000U
-#define __HFN_INT_MBOX_LPU1 0x00200000U
-#define __HFN_INT_MBOX1_LPU0 0x00400000U
-#define __HFN_INT_MBOX1_LPU1 0x00800000U
-#define __HFN_INT_CPE_MASK 0x000000ffU
-#define __HFN_INT_RME_MASK 0x0000ff00U
-
-
-/*
- * crossbow memory map.
- */
-#define PSS_SMEM_PAGE_START 0x8000
-#define PSS_SMEM_PGNUM(_pg0, _ma) ((_pg0) + ((_ma) >> 15))
-#define PSS_SMEM_PGOFF(_ma) ((_ma) & 0x7fff)
-
-/*
- * End of crossbow memory map
- */
-
-
-#endif /* __BFI_CBREG_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_cee.h b/drivers/scsi/bfa/include/bfi/bfi_cee.h
deleted file mode 100644
index 0970596..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_cee.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-/**
- * Copyright (c) 2006-2009 Brocade Communications Systems, Inc.
- * All rights reserved.
- *
- * bfi_dcbx.h BFI Interface (Mailbox commands and related structures)
- * between host driver and DCBX/LLDP firmware module.
- *
-**/
-
-#ifndef __BFI_CEE_H__
-#define __BFI_CEE_H__
-
-#include <bfi/bfi.h>
-
-#pragma pack(1)
-
-
-enum bfi_cee_h2i_msgs_e {
- BFI_CEE_H2I_GET_CFG_REQ = 1,
- BFI_CEE_H2I_RESET_STATS = 2,
- BFI_CEE_H2I_GET_STATS_REQ = 3,
-};
-
-
-enum bfi_cee_i2h_msgs_e {
- BFI_CEE_I2H_GET_CFG_RSP = BFA_I2HM(1),
- BFI_CEE_I2H_RESET_STATS_RSP = BFA_I2HM(2),
- BFI_CEE_I2H_GET_STATS_RSP = BFA_I2HM(3),
-};
-
-
-/* Data structures */
-
-/*
- * BFI_CEE_H2I_RESET_STATS
- */
-struct bfi_lldp_reset_stats_s {
- struct bfi_mhdr_s mh;
-};
-
-/*
- * BFI_CEE_H2I_RESET_STATS
- */
-struct bfi_cee_reset_stats_s {
- struct bfi_mhdr_s mh;
-};
-
-/*
- * BFI_CEE_H2I_GET_CFG_REQ
- */
-struct bfi_cee_get_req_s {
- struct bfi_mhdr_s mh;
- union bfi_addr_u dma_addr;
-};
-
-
-/*
- * BFI_CEE_I2H_GET_CFG_RSP
- */
-struct bfi_cee_get_rsp_s {
- struct bfi_mhdr_s mh;
- u8 cmd_status;
- u8 rsvd[3];
-};
-
-/*
- * BFI_CEE_H2I_GET_STATS_REQ
- */
-struct bfi_cee_stats_req_s {
- struct bfi_mhdr_s mh;
- union bfi_addr_u dma_addr;
-};
-
-
-/*
- * BFI_CEE_I2H_GET_STATS_RSP
- */
-struct bfi_cee_stats_rsp_s {
- struct bfi_mhdr_s mh;
- u8 cmd_status;
- u8 rsvd[3];
-};
-
-
-
-union bfi_cee_h2i_msg_u {
- struct bfi_mhdr_s mh;
- struct bfi_cee_get_req_s get_req;
- struct bfi_cee_stats_req_s stats_req;
-};
-
-
-union bfi_cee_i2h_msg_u {
- struct bfi_mhdr_s mh;
- struct bfi_cee_get_rsp_s get_rsp;
- struct bfi_cee_stats_rsp_s stats_rsp;
-};
-
-#pragma pack()
-
-
-#endif /* __BFI_CEE_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_ctreg.h b/drivers/scsi/bfa/include/bfi/bfi_ctreg.h
deleted file mode 100644
index c0ef5a9..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_ctreg.h
+++ /dev/null
@@ -1,640 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/*
- * bfi_ctreg.h catapult host block register definitions
- *
- * !!! Do not edit. Auto generated. !!!
- */
-
-#ifndef __BFI_CTREG_H__
-#define __BFI_CTREG_H__
-
-
-#define HOSTFN0_LPU_MBOX0_0 0x00019200
-#define HOSTFN1_LPU_MBOX0_8 0x00019260
-#define LPU_HOSTFN0_MBOX0_0 0x00019280
-#define LPU_HOSTFN1_MBOX0_8 0x000192e0
-#define HOSTFN2_LPU_MBOX0_0 0x00019400
-#define HOSTFN3_LPU_MBOX0_8 0x00019460
-#define LPU_HOSTFN2_MBOX0_0 0x00019480
-#define LPU_HOSTFN3_MBOX0_8 0x000194e0
-#define HOSTFN0_INT_STATUS 0x00014000
-#define __HOSTFN0_HALT_OCCURRED 0x01000000
-#define __HOSTFN0_INT_STATUS_LVL_MK 0x00f00000
-#define __HOSTFN0_INT_STATUS_LVL_SH 20
-#define __HOSTFN0_INT_STATUS_LVL(_v) ((_v) << __HOSTFN0_INT_STATUS_LVL_SH)
-#define __HOSTFN0_INT_STATUS_P_MK 0x000f0000
-#define __HOSTFN0_INT_STATUS_P_SH 16
-#define __HOSTFN0_INT_STATUS_P(_v) ((_v) << __HOSTFN0_INT_STATUS_P_SH)
-#define __HOSTFN0_INT_STATUS_F 0x0000ffff
-#define HOSTFN0_INT_MSK 0x00014004
-#define HOST_PAGE_NUM_FN0 0x00014008
-#define __HOST_PAGE_NUM_FN 0x000001ff
-#define HOST_MSIX_ERR_INDEX_FN0 0x0001400c
-#define __MSIX_ERR_INDEX_FN 0x000001ff
-#define HOSTFN1_INT_STATUS 0x00014100
-#define __HOSTFN1_HALT_OCCURRED 0x01000000
-#define __HOSTFN1_INT_STATUS_LVL_MK 0x00f00000
-#define __HOSTFN1_INT_STATUS_LVL_SH 20
-#define __HOSTFN1_INT_STATUS_LVL(_v) ((_v) << __HOSTFN1_INT_STATUS_LVL_SH)
-#define __HOSTFN1_INT_STATUS_P_MK 0x000f0000
-#define __HOSTFN1_INT_STATUS_P_SH 16
-#define __HOSTFN1_INT_STATUS_P(_v) ((_v) << __HOSTFN1_INT_STATUS_P_SH)
-#define __HOSTFN1_INT_STATUS_F 0x0000ffff
-#define HOSTFN1_INT_MSK 0x00014104
-#define HOST_PAGE_NUM_FN1 0x00014108
-#define HOST_MSIX_ERR_INDEX_FN1 0x0001410c
-#define APP_PLL_425_CTL_REG 0x00014204
-#define __P_425_PLL_LOCK 0x80000000
-#define __APP_PLL_425_SRAM_USE_100MHZ 0x00100000
-#define __APP_PLL_425_RESET_TIMER_MK 0x000e0000
-#define __APP_PLL_425_RESET_TIMER_SH 17
-#define __APP_PLL_425_RESET_TIMER(_v) ((_v) << __APP_PLL_425_RESET_TIMER_SH)
-#define __APP_PLL_425_LOGIC_SOFT_RESET 0x00010000
-#define __APP_PLL_425_CNTLMT0_1_MK 0x0000c000
-#define __APP_PLL_425_CNTLMT0_1_SH 14
-#define __APP_PLL_425_CNTLMT0_1(_v) ((_v) << __APP_PLL_425_CNTLMT0_1_SH)
-#define __APP_PLL_425_JITLMT0_1_MK 0x00003000
-#define __APP_PLL_425_JITLMT0_1_SH 12
-#define __APP_PLL_425_JITLMT0_1(_v) ((_v) << __APP_PLL_425_JITLMT0_1_SH)
-#define __APP_PLL_425_HREF 0x00000800
-#define __APP_PLL_425_HDIV 0x00000400
-#define __APP_PLL_425_P0_1_MK 0x00000300
-#define __APP_PLL_425_P0_1_SH 8
-#define __APP_PLL_425_P0_1(_v) ((_v) << __APP_PLL_425_P0_1_SH)
-#define __APP_PLL_425_Z0_2_MK 0x000000e0
-#define __APP_PLL_425_Z0_2_SH 5
-#define __APP_PLL_425_Z0_2(_v) ((_v) << __APP_PLL_425_Z0_2_SH)
-#define __APP_PLL_425_RSEL200500 0x00000010
-#define __APP_PLL_425_ENARST 0x00000008
-#define __APP_PLL_425_BYPASS 0x00000004
-#define __APP_PLL_425_LRESETN 0x00000002
-#define __APP_PLL_425_ENABLE 0x00000001
-#define APP_PLL_312_CTL_REG 0x00014208
-#define __P_312_PLL_LOCK 0x80000000
-#define __ENABLE_MAC_AHB_1 0x00800000
-#define __ENABLE_MAC_AHB_0 0x00400000
-#define __ENABLE_MAC_1 0x00200000
-#define __ENABLE_MAC_0 0x00100000
-#define __APP_PLL_312_RESET_TIMER_MK 0x000e0000
-#define __APP_PLL_312_RESET_TIMER_SH 17
-#define __APP_PLL_312_RESET_TIMER(_v) ((_v) << __APP_PLL_312_RESET_TIMER_SH)
-#define __APP_PLL_312_LOGIC_SOFT_RESET 0x00010000
-#define __APP_PLL_312_CNTLMT0_1_MK 0x0000c000
-#define __APP_PLL_312_CNTLMT0_1_SH 14
-#define __APP_PLL_312_CNTLMT0_1(_v) ((_v) << __APP_PLL_312_CNTLMT0_1_SH)
-#define __APP_PLL_312_JITLMT0_1_MK 0x00003000
-#define __APP_PLL_312_JITLMT0_1_SH 12
-#define __APP_PLL_312_JITLMT0_1(_v) ((_v) << __APP_PLL_312_JITLMT0_1_SH)
-#define __APP_PLL_312_HREF 0x00000800
-#define __APP_PLL_312_HDIV 0x00000400
-#define __APP_PLL_312_P0_1_MK 0x00000300
-#define __APP_PLL_312_P0_1_SH 8
-#define __APP_PLL_312_P0_1(_v) ((_v) << __APP_PLL_312_P0_1_SH)
-#define __APP_PLL_312_Z0_2_MK 0x000000e0
-#define __APP_PLL_312_Z0_2_SH 5
-#define __APP_PLL_312_Z0_2(_v) ((_v) << __APP_PLL_312_Z0_2_SH)
-#define __APP_PLL_312_RSEL200500 0x00000010
-#define __APP_PLL_312_ENARST 0x00000008
-#define __APP_PLL_312_BYPASS 0x00000004
-#define __APP_PLL_312_LRESETN 0x00000002
-#define __APP_PLL_312_ENABLE 0x00000001
-#define MBIST_CTL_REG 0x00014220
-#define __EDRAM_BISTR_START 0x00000004
-#define __MBIST_RESET 0x00000002
-#define __MBIST_START 0x00000001
-#define MBIST_STAT_REG 0x00014224
-#define __EDRAM_BISTR_STATUS 0x00000008
-#define __EDRAM_BISTR_DONE 0x00000004
-#define __MEM_BIT_STATUS 0x00000002
-#define __MBIST_DONE 0x00000001
-#define HOST_SEM0_REG 0x00014230
-#define __HOST_SEMAPHORE 0x00000001
-#define HOST_SEM1_REG 0x00014234
-#define HOST_SEM2_REG 0x00014238
-#define HOST_SEM3_REG 0x0001423c
-#define HOST_SEM0_INFO_REG 0x00014240
-#define HOST_SEM1_INFO_REG 0x00014244
-#define HOST_SEM2_INFO_REG 0x00014248
-#define HOST_SEM3_INFO_REG 0x0001424c
-#define ETH_MAC_SER_REG 0x00014288
-#define __APP_EMS_CKBUFAMPIN 0x00000020
-#define __APP_EMS_REFCLKSEL 0x00000010
-#define __APP_EMS_CMLCKSEL 0x00000008
-#define __APP_EMS_REFCKBUFEN2 0x00000004
-#define __APP_EMS_REFCKBUFEN1 0x00000002
-#define __APP_EMS_CHANNEL_SEL 0x00000001
-#define HOSTFN2_INT_STATUS 0x00014300
-#define __HOSTFN2_HALT_OCCURRED 0x01000000
-#define __HOSTFN2_INT_STATUS_LVL_MK 0x00f00000
-#define __HOSTFN2_INT_STATUS_LVL_SH 20
-#define __HOSTFN2_INT_STATUS_LVL(_v) ((_v) << __HOSTFN2_INT_STATUS_LVL_SH)
-#define __HOSTFN2_INT_STATUS_P_MK 0x000f0000
-#define __HOSTFN2_INT_STATUS_P_SH 16
-#define __HOSTFN2_INT_STATUS_P(_v) ((_v) << __HOSTFN2_INT_STATUS_P_SH)
-#define __HOSTFN2_INT_STATUS_F 0x0000ffff
-#define HOSTFN2_INT_MSK 0x00014304
-#define HOST_PAGE_NUM_FN2 0x00014308
-#define HOST_MSIX_ERR_INDEX_FN2 0x0001430c
-#define HOSTFN3_INT_STATUS 0x00014400
-#define __HALT_OCCURRED 0x01000000
-#define __HOSTFN3_INT_STATUS_LVL_MK 0x00f00000
-#define __HOSTFN3_INT_STATUS_LVL_SH 20
-#define __HOSTFN3_INT_STATUS_LVL(_v) ((_v) << __HOSTFN3_INT_STATUS_LVL_SH)
-#define __HOSTFN3_INT_STATUS_P_MK 0x000f0000
-#define __HOSTFN3_INT_STATUS_P_SH 16
-#define __HOSTFN3_INT_STATUS_P(_v) ((_v) << __HOSTFN3_INT_STATUS_P_SH)
-#define __HOSTFN3_INT_STATUS_F 0x0000ffff
-#define HOSTFN3_INT_MSK 0x00014404
-#define HOST_PAGE_NUM_FN3 0x00014408
-#define HOST_MSIX_ERR_INDEX_FN3 0x0001440c
-#define FNC_ID_REG 0x00014600
-#define __FUNCTION_NUMBER 0x00000007
-#define FNC_PERS_REG 0x00014604
-#define __F3_FUNCTION_ACTIVE 0x80000000
-#define __F3_FUNCTION_MODE 0x40000000
-#define __F3_PORT_MAP_MK 0x30000000
-#define __F3_PORT_MAP_SH 28
-#define __F3_PORT_MAP(_v) ((_v) << __F3_PORT_MAP_SH)
-#define __F3_VM_MODE 0x08000000
-#define __F3_INTX_STATUS_MK 0x07000000
-#define __F3_INTX_STATUS_SH 24
-#define __F3_INTX_STATUS(_v) ((_v) << __F3_INTX_STATUS_SH)
-#define __F2_FUNCTION_ACTIVE 0x00800000
-#define __F2_FUNCTION_MODE 0x00400000
-#define __F2_PORT_MAP_MK 0x00300000
-#define __F2_PORT_MAP_SH 20
-#define __F2_PORT_MAP(_v) ((_v) << __F2_PORT_MAP_SH)
-#define __F2_VM_MODE 0x00080000
-#define __F2_INTX_STATUS_MK 0x00070000
-#define __F2_INTX_STATUS_SH 16
-#define __F2_INTX_STATUS(_v) ((_v) << __F2_INTX_STATUS_SH)
-#define __F1_FUNCTION_ACTIVE 0x00008000
-#define __F1_FUNCTION_MODE 0x00004000
-#define __F1_PORT_MAP_MK 0x00003000
-#define __F1_PORT_MAP_SH 12
-#define __F1_PORT_MAP(_v) ((_v) << __F1_PORT_MAP_SH)
-#define __F1_VM_MODE 0x00000800
-#define __F1_INTX_STATUS_MK 0x00000700
-#define __F1_INTX_STATUS_SH 8
-#define __F1_INTX_STATUS(_v) ((_v) << __F1_INTX_STATUS_SH)
-#define __F0_FUNCTION_ACTIVE 0x00000080
-#define __F0_FUNCTION_MODE 0x00000040
-#define __F0_PORT_MAP_MK 0x00000030
-#define __F0_PORT_MAP_SH 4
-#define __F0_PORT_MAP(_v) ((_v) << __F0_PORT_MAP_SH)
-#define __F0_VM_MODE 0x00000008
-#define __F0_INTX_STATUS 0x00000007
-enum {
- __F0_INTX_STATUS_MSIX = 0x0,
- __F0_INTX_STATUS_INTA = 0x1,
- __F0_INTX_STATUS_INTB = 0x2,
- __F0_INTX_STATUS_INTC = 0x3,
- __F0_INTX_STATUS_INTD = 0x4,
-};
-#define OP_MODE 0x0001460c
-#define __APP_ETH_CLK_LOWSPEED 0x00000004
-#define __GLOBAL_CORECLK_HALFSPEED 0x00000002
-#define __GLOBAL_FCOE_MODE 0x00000001
-#define HOST_SEM4_REG 0x00014610
-#define HOST_SEM5_REG 0x00014614
-#define HOST_SEM6_REG 0x00014618
-#define HOST_SEM7_REG 0x0001461c
-#define HOST_SEM4_INFO_REG 0x00014620
-#define HOST_SEM5_INFO_REG 0x00014624
-#define HOST_SEM6_INFO_REG 0x00014628
-#define HOST_SEM7_INFO_REG 0x0001462c
-#define HOSTFN0_LPU0_MBOX0_CMD_STAT 0x00019000
-#define __HOSTFN0_LPU0_MBOX0_INFO_MK 0xfffffffe
-#define __HOSTFN0_LPU0_MBOX0_INFO_SH 1
-#define __HOSTFN0_LPU0_MBOX0_INFO(_v) ((_v) << __HOSTFN0_LPU0_MBOX0_INFO_SH)
-#define __HOSTFN0_LPU0_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN0_LPU1_MBOX0_CMD_STAT 0x00019004
-#define __HOSTFN0_LPU1_MBOX0_INFO_MK 0xfffffffe
-#define __HOSTFN0_LPU1_MBOX0_INFO_SH 1
-#define __HOSTFN0_LPU1_MBOX0_INFO(_v) ((_v) << __HOSTFN0_LPU1_MBOX0_INFO_SH)
-#define __HOSTFN0_LPU1_MBOX0_CMD_STATUS 0x00000001
-#define LPU0_HOSTFN0_MBOX0_CMD_STAT 0x00019008
-#define __LPU0_HOSTFN0_MBOX0_INFO_MK 0xfffffffe
-#define __LPU0_HOSTFN0_MBOX0_INFO_SH 1
-#define __LPU0_HOSTFN0_MBOX0_INFO(_v) ((_v) << __LPU0_HOSTFN0_MBOX0_INFO_SH)
-#define __LPU0_HOSTFN0_MBOX0_CMD_STATUS 0x00000001
-#define LPU1_HOSTFN0_MBOX0_CMD_STAT 0x0001900c
-#define __LPU1_HOSTFN0_MBOX0_INFO_MK 0xfffffffe
-#define __LPU1_HOSTFN0_MBOX0_INFO_SH 1
-#define __LPU1_HOSTFN0_MBOX0_INFO(_v) ((_v) << __LPU1_HOSTFN0_MBOX0_INFO_SH)
-#define __LPU1_HOSTFN0_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN1_LPU0_MBOX0_CMD_STAT 0x00019010
-#define __HOSTFN1_LPU0_MBOX0_INFO_MK 0xfffffffe
-#define __HOSTFN1_LPU0_MBOX0_INFO_SH 1
-#define __HOSTFN1_LPU0_MBOX0_INFO(_v) ((_v) << __HOSTFN1_LPU0_MBOX0_INFO_SH)
-#define __HOSTFN1_LPU0_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN1_LPU1_MBOX0_CMD_STAT 0x00019014
-#define __HOSTFN1_LPU1_MBOX0_INFO_MK 0xfffffffe
-#define __HOSTFN1_LPU1_MBOX0_INFO_SH 1
-#define __HOSTFN1_LPU1_MBOX0_INFO(_v) ((_v) << __HOSTFN1_LPU1_MBOX0_INFO_SH)
-#define __HOSTFN1_LPU1_MBOX0_CMD_STATUS 0x00000001
-#define LPU0_HOSTFN1_MBOX0_CMD_STAT 0x00019018
-#define __LPU0_HOSTFN1_MBOX0_INFO_MK 0xfffffffe
-#define __LPU0_HOSTFN1_MBOX0_INFO_SH 1
-#define __LPU0_HOSTFN1_MBOX0_INFO(_v) ((_v) << __LPU0_HOSTFN1_MBOX0_INFO_SH)
-#define __LPU0_HOSTFN1_MBOX0_CMD_STATUS 0x00000001
-#define LPU1_HOSTFN1_MBOX0_CMD_STAT 0x0001901c
-#define __LPU1_HOSTFN1_MBOX0_INFO_MK 0xfffffffe
-#define __LPU1_HOSTFN1_MBOX0_INFO_SH 1
-#define __LPU1_HOSTFN1_MBOX0_INFO(_v) ((_v) << __LPU1_HOSTFN1_MBOX0_INFO_SH)
-#define __LPU1_HOSTFN1_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN2_LPU0_MBOX0_CMD_STAT 0x00019150
-#define __HOSTFN2_LPU0_MBOX0_INFO_MK 0xfffffffe
-#define __HOSTFN2_LPU0_MBOX0_INFO_SH 1
-#define __HOSTFN2_LPU0_MBOX0_INFO(_v) ((_v) << __HOSTFN2_LPU0_MBOX0_INFO_SH)
-#define __HOSTFN2_LPU0_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN2_LPU1_MBOX0_CMD_STAT 0x00019154
-#define __HOSTFN2_LPU1_MBOX0_INFO_MK 0xfffffffe
-#define __HOSTFN2_LPU1_MBOX0_INFO_SH 1
-#define __HOSTFN2_LPU1_MBOX0_INFO(_v) ((_v) << __HOSTFN2_LPU1_MBOX0_INFO_SH)
-#define __HOSTFN2_LPU1_MBOX0BOX0_CMD_STATUS 0x00000001
-#define LPU0_HOSTFN2_MBOX0_CMD_STAT 0x00019158
-#define __LPU0_HOSTFN2_MBOX0_INFO_MK 0xfffffffe
-#define __LPU0_HOSTFN2_MBOX0_INFO_SH 1
-#define __LPU0_HOSTFN2_MBOX0_INFO(_v) ((_v) << __LPU0_HOSTFN2_MBOX0_INFO_SH)
-#define __LPU0_HOSTFN2_MBOX0_CMD_STATUS 0x00000001
-#define LPU1_HOSTFN2_MBOX0_CMD_STAT 0x0001915c
-#define __LPU1_HOSTFN2_MBOX0_INFO_MK 0xfffffffe
-#define __LPU1_HOSTFN2_MBOX0_INFO_SH 1
-#define __LPU1_HOSTFN2_MBOX0_INFO(_v) ((_v) << __LPU1_HOSTFN2_MBOX0_INFO_SH)
-#define __LPU1_HOSTFN2_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN3_LPU0_MBOX0_CMD_STAT 0x00019160
-#define __HOSTFN3_LPU0_MBOX0_INFO_MK 0xfffffffe
-#define __HOSTFN3_LPU0_MBOX0_INFO_SH 1
-#define __HOSTFN3_LPU0_MBOX0_INFO(_v) ((_v) << __HOSTFN3_LPU0_MBOX0_INFO_SH)
-#define __HOSTFN3_LPU0_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN3_LPU1_MBOX0_CMD_STAT 0x00019164
-#define __HOSTFN3_LPU1_MBOX0_INFO_MK 0xfffffffe
-#define __HOSTFN3_LPU1_MBOX0_INFO_SH 1
-#define __HOSTFN3_LPU1_MBOX0_INFO(_v) ((_v) << __HOSTFN3_LPU1_MBOX0_INFO_SH)
-#define __HOSTFN3_LPU1_MBOX0_CMD_STATUS 0x00000001
-#define LPU0_HOSTFN3_MBOX0_CMD_STAT 0x00019168
-#define __LPU0_HOSTFN3_MBOX0_INFO_MK 0xfffffffe
-#define __LPU0_HOSTFN3_MBOX0_INFO_SH 1
-#define __LPU0_HOSTFN3_MBOX0_INFO(_v) ((_v) << __LPU0_HOSTFN3_MBOX0_INFO_SH)
-#define __LPU0_HOSTFN3_MBOX0_CMD_STATUS 0x00000001
-#define LPU1_HOSTFN3_MBOX0_CMD_STAT 0x0001916c
-#define __LPU1_HOSTFN3_MBOX0_INFO_MK 0xfffffffe
-#define __LPU1_HOSTFN3_MBOX0_INFO_SH 1
-#define __LPU1_HOSTFN3_MBOX0_INFO(_v) ((_v) << __LPU1_HOSTFN3_MBOX0_INFO_SH)
-#define __LPU1_HOSTFN3_MBOX0_CMD_STATUS 0x00000001
-#define FW_INIT_HALT_P0 0x000191ac
-#define __FW_INIT_HALT_P 0x00000001
-#define FW_INIT_HALT_P1 0x000191bc
-#define CPE_PI_PTR_Q0 0x00038000
-#define __CPE_PI_UNUSED_MK 0xffff0000
-#define __CPE_PI_UNUSED_SH 16
-#define __CPE_PI_UNUSED(_v) ((_v) << __CPE_PI_UNUSED_SH)
-#define __CPE_PI_PTR 0x0000ffff
-#define CPE_PI_PTR_Q1 0x00038040
-#define CPE_CI_PTR_Q0 0x00038004
-#define __CPE_CI_UNUSED_MK 0xffff0000
-#define __CPE_CI_UNUSED_SH 16
-#define __CPE_CI_UNUSED(_v) ((_v) << __CPE_CI_UNUSED_SH)
-#define __CPE_CI_PTR 0x0000ffff
-#define CPE_CI_PTR_Q1 0x00038044
-#define CPE_DEPTH_Q0 0x00038008
-#define __CPE_DEPTH_UNUSED_MK 0xf8000000
-#define __CPE_DEPTH_UNUSED_SH 27
-#define __CPE_DEPTH_UNUSED(_v) ((_v) << __CPE_DEPTH_UNUSED_SH)
-#define __CPE_MSIX_VEC_INDEX_MK 0x07ff0000
-#define __CPE_MSIX_VEC_INDEX_SH 16
-#define __CPE_MSIX_VEC_INDEX(_v) ((_v) << __CPE_MSIX_VEC_INDEX_SH)
-#define __CPE_DEPTH 0x0000ffff
-#define CPE_DEPTH_Q1 0x00038048
-#define CPE_QCTRL_Q0 0x0003800c
-#define __CPE_CTRL_UNUSED30_MK 0xfc000000
-#define __CPE_CTRL_UNUSED30_SH 26
-#define __CPE_CTRL_UNUSED30(_v) ((_v) << __CPE_CTRL_UNUSED30_SH)
-#define __CPE_FUNC_INT_CTRL_MK 0x03000000
-#define __CPE_FUNC_INT_CTRL_SH 24
-#define __CPE_FUNC_INT_CTRL(_v) ((_v) << __CPE_FUNC_INT_CTRL_SH)
-enum {
- __CPE_FUNC_INT_CTRL_DISABLE = 0x0,
- __CPE_FUNC_INT_CTRL_F2NF = 0x1,
- __CPE_FUNC_INT_CTRL_3QUART = 0x2,
- __CPE_FUNC_INT_CTRL_HALF = 0x3,
-};
-#define __CPE_CTRL_UNUSED20_MK 0x00f00000
-#define __CPE_CTRL_UNUSED20_SH 20
-#define __CPE_CTRL_UNUSED20(_v) ((_v) << __CPE_CTRL_UNUSED20_SH)
-#define __CPE_SCI_TH_MK 0x000f0000
-#define __CPE_SCI_TH_SH 16
-#define __CPE_SCI_TH(_v) ((_v) << __CPE_SCI_TH_SH)
-#define __CPE_CTRL_UNUSED10_MK 0x0000c000
-#define __CPE_CTRL_UNUSED10_SH 14
-#define __CPE_CTRL_UNUSED10(_v) ((_v) << __CPE_CTRL_UNUSED10_SH)
-#define __CPE_ACK_PENDING 0x00002000
-#define __CPE_CTRL_UNUSED40_MK 0x00001c00
-#define __CPE_CTRL_UNUSED40_SH 10
-#define __CPE_CTRL_UNUSED40(_v) ((_v) << __CPE_CTRL_UNUSED40_SH)
-#define __CPE_PCIEID_MK 0x00000300
-#define __CPE_PCIEID_SH 8
-#define __CPE_PCIEID(_v) ((_v) << __CPE_PCIEID_SH)
-#define __CPE_CTRL_UNUSED00_MK 0x000000fe
-#define __CPE_CTRL_UNUSED00_SH 1
-#define __CPE_CTRL_UNUSED00(_v) ((_v) << __CPE_CTRL_UNUSED00_SH)
-#define __CPE_ESIZE 0x00000001
-#define CPE_QCTRL_Q1 0x0003804c
-#define __CPE_CTRL_UNUSED31_MK 0xfc000000
-#define __CPE_CTRL_UNUSED31_SH 26
-#define __CPE_CTRL_UNUSED31(_v) ((_v) << __CPE_CTRL_UNUSED31_SH)
-#define __CPE_CTRL_UNUSED21_MK 0x00f00000
-#define __CPE_CTRL_UNUSED21_SH 20
-#define __CPE_CTRL_UNUSED21(_v) ((_v) << __CPE_CTRL_UNUSED21_SH)
-#define __CPE_CTRL_UNUSED11_MK 0x0000c000
-#define __CPE_CTRL_UNUSED11_SH 14
-#define __CPE_CTRL_UNUSED11(_v) ((_v) << __CPE_CTRL_UNUSED11_SH)
-#define __CPE_CTRL_UNUSED41_MK 0x00001c00
-#define __CPE_CTRL_UNUSED41_SH 10
-#define __CPE_CTRL_UNUSED41(_v) ((_v) << __CPE_CTRL_UNUSED41_SH)
-#define __CPE_CTRL_UNUSED01_MK 0x000000fe
-#define __CPE_CTRL_UNUSED01_SH 1
-#define __CPE_CTRL_UNUSED01(_v) ((_v) << __CPE_CTRL_UNUSED01_SH)
-#define RME_PI_PTR_Q0 0x00038020
-#define __LATENCY_TIME_STAMP_MK 0xffff0000
-#define __LATENCY_TIME_STAMP_SH 16
-#define __LATENCY_TIME_STAMP(_v) ((_v) << __LATENCY_TIME_STAMP_SH)
-#define __RME_PI_PTR 0x0000ffff
-#define RME_PI_PTR_Q1 0x00038060
-#define RME_CI_PTR_Q0 0x00038024
-#define __DELAY_TIME_STAMP_MK 0xffff0000
-#define __DELAY_TIME_STAMP_SH 16
-#define __DELAY_TIME_STAMP(_v) ((_v) << __DELAY_TIME_STAMP_SH)
-#define __RME_CI_PTR 0x0000ffff
-#define RME_CI_PTR_Q1 0x00038064
-#define RME_DEPTH_Q0 0x00038028
-#define __RME_DEPTH_UNUSED_MK 0xf8000000
-#define __RME_DEPTH_UNUSED_SH 27
-#define __RME_DEPTH_UNUSED(_v) ((_v) << __RME_DEPTH_UNUSED_SH)
-#define __RME_MSIX_VEC_INDEX_MK 0x07ff0000
-#define __RME_MSIX_VEC_INDEX_SH 16
-#define __RME_MSIX_VEC_INDEX(_v) ((_v) << __RME_MSIX_VEC_INDEX_SH)
-#define __RME_DEPTH 0x0000ffff
-#define RME_DEPTH_Q1 0x00038068
-#define RME_QCTRL_Q0 0x0003802c
-#define __RME_INT_LATENCY_TIMER_MK 0xff000000
-#define __RME_INT_LATENCY_TIMER_SH 24
-#define __RME_INT_LATENCY_TIMER(_v) ((_v) << __RME_INT_LATENCY_TIMER_SH)
-#define __RME_INT_DELAY_TIMER_MK 0x00ff0000
-#define __RME_INT_DELAY_TIMER_SH 16
-#define __RME_INT_DELAY_TIMER(_v) ((_v) << __RME_INT_DELAY_TIMER_SH)
-#define __RME_INT_DELAY_DISABLE 0x00008000
-#define __RME_DLY_DELAY_DISABLE 0x00004000
-#define __RME_ACK_PENDING 0x00002000
-#define __RME_FULL_INTERRUPT_DISABLE 0x00001000
-#define __RME_CTRL_UNUSED10_MK 0x00000c00
-#define __RME_CTRL_UNUSED10_SH 10
-#define __RME_CTRL_UNUSED10(_v) ((_v) << __RME_CTRL_UNUSED10_SH)
-#define __RME_PCIEID_MK 0x00000300
-#define __RME_PCIEID_SH 8
-#define __RME_PCIEID(_v) ((_v) << __RME_PCIEID_SH)
-#define __RME_CTRL_UNUSED00_MK 0x000000fe
-#define __RME_CTRL_UNUSED00_SH 1
-#define __RME_CTRL_UNUSED00(_v) ((_v) << __RME_CTRL_UNUSED00_SH)
-#define __RME_ESIZE 0x00000001
-#define RME_QCTRL_Q1 0x0003806c
-#define __RME_CTRL_UNUSED11_MK 0x00000c00
-#define __RME_CTRL_UNUSED11_SH 10
-#define __RME_CTRL_UNUSED11(_v) ((_v) << __RME_CTRL_UNUSED11_SH)
-#define __RME_CTRL_UNUSED01_MK 0x000000fe
-#define __RME_CTRL_UNUSED01_SH 1
-#define __RME_CTRL_UNUSED01(_v) ((_v) << __RME_CTRL_UNUSED01_SH)
-#define PSS_CTL_REG 0x00018800
-#define __PSS_I2C_CLK_DIV_MK 0x007f0000
-#define __PSS_I2C_CLK_DIV_SH 16
-#define __PSS_I2C_CLK_DIV(_v) ((_v) << __PSS_I2C_CLK_DIV_SH)
-#define __PSS_LMEM_INIT_DONE 0x00001000
-#define __PSS_LMEM_RESET 0x00000200
-#define __PSS_LMEM_INIT_EN 0x00000100
-#define __PSS_LPU1_RESET 0x00000002
-#define __PSS_LPU0_RESET 0x00000001
-#define PSS_ERR_STATUS_REG 0x00018810
-#define __PSS_LPU1_TCM_READ_ERR 0x00200000
-#define __PSS_LPU0_TCM_READ_ERR 0x00100000
-#define __PSS_LMEM5_CORR_ERR 0x00080000
-#define __PSS_LMEM4_CORR_ERR 0x00040000
-#define __PSS_LMEM3_CORR_ERR 0x00020000
-#define __PSS_LMEM2_CORR_ERR 0x00010000
-#define __PSS_LMEM1_CORR_ERR 0x00008000
-#define __PSS_LMEM0_CORR_ERR 0x00004000
-#define __PSS_LMEM5_UNCORR_ERR 0x00002000
-#define __PSS_LMEM4_UNCORR_ERR 0x00001000
-#define __PSS_LMEM3_UNCORR_ERR 0x00000800
-#define __PSS_LMEM2_UNCORR_ERR 0x00000400
-#define __PSS_LMEM1_UNCORR_ERR 0x00000200
-#define __PSS_LMEM0_UNCORR_ERR 0x00000100
-#define __PSS_BAL_PERR 0x00000080
-#define __PSS_DIP_IF_ERR 0x00000040
-#define __PSS_IOH_IF_ERR 0x00000020
-#define __PSS_TDS_IF_ERR 0x00000010
-#define __PSS_RDS_IF_ERR 0x00000008
-#define __PSS_SGM_IF_ERR 0x00000004
-#define __PSS_LPU1_RAM_ERR 0x00000002
-#define __PSS_LPU0_RAM_ERR 0x00000001
-#define ERR_SET_REG 0x00018818
-#define __PSS_ERR_STATUS_SET 0x003fffff
-#define PMM_1T_RESET_REG_P0 0x0002381c
-#define __PMM_1T_RESET_P 0x00000001
-#define PMM_1T_RESET_REG_P1 0x00023c1c
-#define HQM_QSET0_RXQ_DRBL_P0 0x00038000
-#define __RXQ0_ADD_VECTORS_P 0x80000000
-#define __RXQ0_STOP_P 0x40000000
-#define __RXQ0_PRD_PTR_P 0x0000ffff
-#define HQM_QSET1_RXQ_DRBL_P0 0x00038080
-#define __RXQ1_ADD_VECTORS_P 0x80000000
-#define __RXQ1_STOP_P 0x40000000
-#define __RXQ1_PRD_PTR_P 0x0000ffff
-#define HQM_QSET0_RXQ_DRBL_P1 0x0003c000
-#define HQM_QSET1_RXQ_DRBL_P1 0x0003c080
-#define HQM_QSET0_TXQ_DRBL_P0 0x00038020
-#define __TXQ0_ADD_VECTORS_P 0x80000000
-#define __TXQ0_STOP_P 0x40000000
-#define __TXQ0_PRD_PTR_P 0x0000ffff
-#define HQM_QSET1_TXQ_DRBL_P0 0x000380a0
-#define __TXQ1_ADD_VECTORS_P 0x80000000
-#define __TXQ1_STOP_P 0x40000000
-#define __TXQ1_PRD_PTR_P 0x0000ffff
-#define HQM_QSET0_TXQ_DRBL_P1 0x0003c020
-#define HQM_QSET1_TXQ_DRBL_P1 0x0003c0a0
-#define HQM_QSET0_IB_DRBL_1_P0 0x00038040
-#define __IB1_0_ACK_P 0x80000000
-#define __IB1_0_DISABLE_P 0x40000000
-#define __IB1_0_NUM_OF_ACKED_EVENTS_P 0x0000ffff
-#define HQM_QSET1_IB_DRBL_1_P0 0x000380c0
-#define __IB1_1_ACK_P 0x80000000
-#define __IB1_1_DISABLE_P 0x40000000
-#define __IB1_1_NUM_OF_ACKED_EVENTS_P 0x0000ffff
-#define HQM_QSET0_IB_DRBL_1_P1 0x0003c040
-#define HQM_QSET1_IB_DRBL_1_P1 0x0003c0c0
-#define HQM_QSET0_IB_DRBL_2_P0 0x00038060
-#define __IB2_0_ACK_P 0x80000000
-#define __IB2_0_DISABLE_P 0x40000000
-#define __IB2_0_NUM_OF_ACKED_EVENTS_P 0x0000ffff
-#define HQM_QSET1_IB_DRBL_2_P0 0x000380e0
-#define __IB2_1_ACK_P 0x80000000
-#define __IB2_1_DISABLE_P 0x40000000
-#define __IB2_1_NUM_OF_ACKED_EVENTS_P 0x0000ffff
-#define HQM_QSET0_IB_DRBL_2_P1 0x0003c060
-#define HQM_QSET1_IB_DRBL_2_P1 0x0003c0e0
-
-
-/*
- * These definitions are either in error/missing in spec. Its auto-generated
- * from hard coded values in regparse.pl.
- */
-#define __EMPHPOST_AT_4G_MK_FIX 0x0000001c
-#define __EMPHPOST_AT_4G_SH_FIX 0x00000002
-#define __EMPHPRE_AT_4G_FIX 0x00000003
-#define __SFP_TXRATE_EN_FIX 0x00000100
-#define __SFP_RXRATE_EN_FIX 0x00000080
-
-
-/*
- * These register definitions are auto-generated from hard coded values
- * in regparse.pl.
- */
-
-
-/*
- * These register mapping definitions are auto-generated from mapping tables
- * in regparse.pl.
- */
-#define BFA_IOC0_HBEAT_REG HOST_SEM0_INFO_REG
-#define BFA_IOC0_STATE_REG HOST_SEM1_INFO_REG
-#define BFA_IOC1_HBEAT_REG HOST_SEM2_INFO_REG
-#define BFA_IOC1_STATE_REG HOST_SEM3_INFO_REG
-#define BFA_FW_USE_COUNT HOST_SEM4_INFO_REG
-
-#define CPE_DEPTH_Q(__n) \
- (CPE_DEPTH_Q0 + (__n) * (CPE_DEPTH_Q1 - CPE_DEPTH_Q0))
-#define CPE_QCTRL_Q(__n) \
- (CPE_QCTRL_Q0 + (__n) * (CPE_QCTRL_Q1 - CPE_QCTRL_Q0))
-#define CPE_PI_PTR_Q(__n) \
- (CPE_PI_PTR_Q0 + (__n) * (CPE_PI_PTR_Q1 - CPE_PI_PTR_Q0))
-#define CPE_CI_PTR_Q(__n) \
- (CPE_CI_PTR_Q0 + (__n) * (CPE_CI_PTR_Q1 - CPE_CI_PTR_Q0))
-#define RME_DEPTH_Q(__n) \
- (RME_DEPTH_Q0 + (__n) * (RME_DEPTH_Q1 - RME_DEPTH_Q0))
-#define RME_QCTRL_Q(__n) \
- (RME_QCTRL_Q0 + (__n) * (RME_QCTRL_Q1 - RME_QCTRL_Q0))
-#define RME_PI_PTR_Q(__n) \
- (RME_PI_PTR_Q0 + (__n) * (RME_PI_PTR_Q1 - RME_PI_PTR_Q0))
-#define RME_CI_PTR_Q(__n) \
- (RME_CI_PTR_Q0 + (__n) * (RME_CI_PTR_Q1 - RME_CI_PTR_Q0))
-#define HQM_QSET_RXQ_DRBL_P0(__n) \
- (HQM_QSET0_RXQ_DRBL_P0 + (__n) * (HQM_QSET1_RXQ_DRBL_P0 - \
- HQM_QSET0_RXQ_DRBL_P0))
-#define HQM_QSET_TXQ_DRBL_P0(__n) \
- (HQM_QSET0_TXQ_DRBL_P0 + (__n) * (HQM_QSET1_TXQ_DRBL_P0 - \
- HQM_QSET0_TXQ_DRBL_P0))
-#define HQM_QSET_IB_DRBL_1_P0(__n) \
- (HQM_QSET0_IB_DRBL_1_P0 + (__n) * (HQM_QSET1_IB_DRBL_1_P0 - \
- HQM_QSET0_IB_DRBL_1_P0))
-#define HQM_QSET_IB_DRBL_2_P0(__n) \
- (HQM_QSET0_IB_DRBL_2_P0 + (__n) * (HQM_QSET1_IB_DRBL_2_P0 - \
- HQM_QSET0_IB_DRBL_2_P0))
-#define HQM_QSET_RXQ_DRBL_P1(__n) \
- (HQM_QSET0_RXQ_DRBL_P1 + (__n) * (HQM_QSET1_RXQ_DRBL_P1 - \
- HQM_QSET0_RXQ_DRBL_P1))
-#define HQM_QSET_TXQ_DRBL_P1(__n) \
- (HQM_QSET0_TXQ_DRBL_P1 + (__n) * (HQM_QSET1_TXQ_DRBL_P1 - \
- HQM_QSET0_TXQ_DRBL_P1))
-#define HQM_QSET_IB_DRBL_1_P1(__n) \
- (HQM_QSET0_IB_DRBL_1_P1 + (__n) * (HQM_QSET1_IB_DRBL_1_P1 - \
- HQM_QSET0_IB_DRBL_1_P1))
-#define HQM_QSET_IB_DRBL_2_P1(__n) \
- (HQM_QSET0_IB_DRBL_2_P1 + (__n) * (HQM_QSET1_IB_DRBL_2_P1 - \
- HQM_QSET0_IB_DRBL_2_P1))
-
-#define CPE_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
-#define RME_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
-#define CPE_Q_MASK(__q) ((__q) & 0x3)
-#define RME_Q_MASK(__q) ((__q) & 0x3)
-
-
-/*
- * PCI MSI-X vector defines
- */
-enum {
- BFA_MSIX_CPE_Q0 = 0,
- BFA_MSIX_CPE_Q1 = 1,
- BFA_MSIX_CPE_Q2 = 2,
- BFA_MSIX_CPE_Q3 = 3,
- BFA_MSIX_RME_Q0 = 4,
- BFA_MSIX_RME_Q1 = 5,
- BFA_MSIX_RME_Q2 = 6,
- BFA_MSIX_RME_Q3 = 7,
- BFA_MSIX_LPU_ERR = 8,
- BFA_MSIX_CT_MAX = 9,
-};
-
-/*
- * And corresponding host interrupt status bit field defines
- */
-#define __HFN_INT_CPE_Q0 0x00000001U
-#define __HFN_INT_CPE_Q1 0x00000002U
-#define __HFN_INT_CPE_Q2 0x00000004U
-#define __HFN_INT_CPE_Q3 0x00000008U
-#define __HFN_INT_CPE_Q4 0x00000010U
-#define __HFN_INT_CPE_Q5 0x00000020U
-#define __HFN_INT_CPE_Q6 0x00000040U
-#define __HFN_INT_CPE_Q7 0x00000080U
-#define __HFN_INT_RME_Q0 0x00000100U
-#define __HFN_INT_RME_Q1 0x00000200U
-#define __HFN_INT_RME_Q2 0x00000400U
-#define __HFN_INT_RME_Q3 0x00000800U
-#define __HFN_INT_RME_Q4 0x00001000U
-#define __HFN_INT_RME_Q5 0x00002000U
-#define __HFN_INT_RME_Q6 0x00004000U
-#define __HFN_INT_RME_Q7 0x00008000U
-#define __HFN_INT_ERR_EMC 0x00010000U
-#define __HFN_INT_ERR_LPU0 0x00020000U
-#define __HFN_INT_ERR_LPU1 0x00040000U
-#define __HFN_INT_ERR_PSS 0x00080000U
-#define __HFN_INT_MBOX_LPU0 0x00100000U
-#define __HFN_INT_MBOX_LPU1 0x00200000U
-#define __HFN_INT_MBOX1_LPU0 0x00400000U
-#define __HFN_INT_MBOX1_LPU1 0x00800000U
-#define __HFN_INT_LL_HALT 0x01000000U
-#define __HFN_INT_CPE_MASK 0x000000ffU
-#define __HFN_INT_RME_MASK 0x0000ff00U
-
-
-/*
- * catapult memory map.
- */
-#define LL_PGN_HQM0 0x0096
-#define LL_PGN_HQM1 0x0097
-#define PSS_SMEM_PAGE_START 0x8000
-#define PSS_SMEM_PGNUM(_pg0, _ma) ((_pg0) + ((_ma) >> 15))
-#define PSS_SMEM_PGOFF(_ma) ((_ma) & 0x7fff)
-
-/*
- * End of catapult memory map
- */
-
-
-#endif /* __BFI_CTREG_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_fabric.h b/drivers/scsi/bfa/include/bfi/bfi_fabric.h
deleted file mode 100644
index c0669ed..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_fabric.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFI_FABRIC_H__
-#define __BFI_FABRIC_H__
-
-#include <bfi/bfi.h>
-
-#pragma pack(1)
-
-enum bfi_fabric_h2i_msgs {
- BFI_FABRIC_H2I_CREATE_REQ = 1,
- BFI_FABRIC_H2I_DELETE_REQ = 2,
- BFI_FABRIC_H2I_SETAUTH = 3,
-};
-
-enum bfi_fabric_i2h_msgs {
- BFI_FABRIC_I2H_CREATE_RSP = BFA_I2HM(1),
- BFI_FABRIC_I2H_DELETE_RSP = BFA_I2HM(2),
- BFI_FABRIC_I2H_SETAUTH_RSP = BFA_I2HM(3),
- BFI_FABRIC_I2H_ONLINE = BFA_I2HM(4),
- BFI_FABRIC_I2H_OFFLINE = BFA_I2HM(5),
-};
-
-struct bfi_fabric_create_req_s {
- bfi_mhdr_t mh; /* common msg header */
- u8 vf_en; /* virtual fabric enable */
- u8 rsvd;
- u16 vf_id; /* virtual fabric ID */
- wwn_t pwwn; /* port name */
- wwn_t nwwn; /* node name */
-};
-
-struct bfi_fabric_create_rsp_s {
- bfi_mhdr_t mh; /* common msg header */
- u16 bfa_handle; /* host fabric handle */
- u8 status; /* fabric create status */
- u8 rsvd;
-};
-
-struct bfi_fabric_delete_req_s {
- bfi_mhdr_t mh; /* common msg header */
- u16 fw_handle; /* firmware fabric handle */
- u16 rsvd;
-};
-
-struct bfi_fabric_delete_rsp_s {
- bfi_mhdr_t mh; /* common msg header */
- u16 bfa_handle; /* host fabric handle */
- u8 status; /* fabric deletion status */
- u8 rsvd;
-};
-
-#define BFI_FABRIC_AUTHSECRET_LEN 64
-struct bfi_fabric_setauth_req_s {
- bfi_mhdr_t mh; /* common msg header */
- u16 fw_handle; /* f/w handle of fabric */
- u8 algorithm;
- u8 group;
- u8 secret[BFI_FABRIC_AUTHSECRET_LEN];
-};
-
-union bfi_fabric_h2i_msg_u {
- bfi_msg_t *msg;
- struct bfi_fabric_create_req_s *create_req;
- struct bfi_fabric_delete_req_s *delete_req;
-};
-
-union bfi_fabric_i2h_msg_u {
- bfi_msg_t *msg;
- struct bfi_fabric_create_rsp_s *create_rsp;
- struct bfi_fabric_delete_rsp_s *delete_rsp;
-};
-
-#pragma pack()
-
-#endif /* __BFI_FABRIC_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_fcpim.h b/drivers/scsi/bfa/include/bfi/bfi_fcpim.h
deleted file mode 100644
index 52c059f..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_fcpim.h
+++ /dev/null
@@ -1,301 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFI_FCPIM_H__
-#define __BFI_FCPIM_H__
-
-#include "bfi.h"
-#include <protocol/fcp.h>
-
-#pragma pack(1)
-
-/*
- * Initiator mode I-T nexus interface defines.
- */
-
-enum bfi_itnim_h2i {
- BFI_ITNIM_H2I_CREATE_REQ = 1, /* i-t nexus creation */
- BFI_ITNIM_H2I_DELETE_REQ = 2, /* i-t nexus deletion */
-};
-
-enum bfi_itnim_i2h {
- BFI_ITNIM_I2H_CREATE_RSP = BFA_I2HM(1),
- BFI_ITNIM_I2H_DELETE_RSP = BFA_I2HM(2),
- BFI_ITNIM_I2H_SLER_EVENT = BFA_I2HM(3),
-};
-
-struct bfi_itnim_create_req_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u16 fw_handle; /* f/w handle for itnim */
- u8 class; /* FC class for IO */
- u8 seq_rec; /* sequence recovery support */
- u8 msg_no; /* seq id of the msg */
-};
-
-struct bfi_itnim_create_rsp_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u16 bfa_handle; /* bfa handle for itnim */
- u8 status; /* fcp request status */
- u8 seq_id; /* seq id of the msg */
-};
-
-struct bfi_itnim_delete_req_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u16 fw_handle; /* f/w itnim handle */
- u8 seq_id; /* seq id of the msg */
- u8 rsvd;
-};
-
-struct bfi_itnim_delete_rsp_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u16 bfa_handle; /* bfa handle for itnim */
- u8 status; /* fcp request status */
- u8 seq_id; /* seq id of the msg */
-};
-
-struct bfi_itnim_sler_event_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u16 bfa_handle; /* bfa handle for itnim */
- u16 rsvd;
-};
-
-union bfi_itnim_h2i_msg_u {
- struct bfi_itnim_create_req_s *create_req;
- struct bfi_itnim_delete_req_s *delete_req;
- struct bfi_msg_s *msg;
-};
-
-union bfi_itnim_i2h_msg_u {
- struct bfi_itnim_create_rsp_s *create_rsp;
- struct bfi_itnim_delete_rsp_s *delete_rsp;
- struct bfi_itnim_sler_event_s *sler_event;
- struct bfi_msg_s *msg;
-};
-
-/*
- * Initiator mode IO interface defines.
- */
-
-enum bfi_ioim_h2i {
- BFI_IOIM_H2I_IOABORT_REQ = 1, /* IO abort request */
- BFI_IOIM_H2I_IOCLEANUP_REQ = 2, /* IO cleanup request */
-};
-
-enum bfi_ioim_i2h {
- BFI_IOIM_I2H_IO_RSP = BFA_I2HM(1), /* non-fp IO response */
- BFI_IOIM_I2H_IOABORT_RSP = BFA_I2HM(2),/* ABORT rsp */
-};
-
-/**
- * IO command DIF info
- */
-struct bfi_ioim_dif_s {
- u32 dif_info[4];
-};
-
-/**
- * FCP IO messages overview
- *
- * @note
- * - Max CDB length supported is 64 bytes.
- * - SCSI Linked commands and SCSI bi-directional Commands not
- * supported.
- *
- */
-struct bfi_ioim_req_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u16 io_tag; /* I/O tag */
- u16 rport_hdl; /* itnim/rport firmware handle */
- struct fcp_cmnd_s cmnd; /* IO request info */
-
- /**
- * SG elements array within the IO request must be double word
- * aligned. This aligment is required to optimize SGM setup for the IO.
- */
- struct bfi_sge_s sges[BFI_SGE_INLINE_MAX];
- u8 io_timeout;
- u8 dif_en;
- u8 rsvd_a[2];
- struct bfi_ioim_dif_s dif;
-};
-
-/**
- * This table shows various IO status codes from firmware and their
- * meaning. Host driver can use these status codes to further process
- * IO completions.
- *
- * BFI_IOIM_STS_OK : IO completed with error free SCSI &
- * transport status.
- * - io-tag can be reused.
- *
- * BFA_IOIM_STS_SCSI_ERR : IO completed with scsi error.
- * - io-tag can be reused.
- *
- * BFI_IOIM_STS_HOST_ABORTED : IO was aborted successfully due to
- * host request.
- * - io-tag cannot be reused yet.
- *
- * BFI_IOIM_STS_ABORTED : IO was aborted successfully
- * internally by f/w.
- * - io-tag cannot be reused yet.
- *
- * BFI_IOIM_STS_TIMEDOUT : IO timedout and ABTS/RRQ is happening
- * in the firmware and
- * - io-tag cannot be reused yet.
- *
- * BFI_IOIM_STS_SQER_NEEDED : Firmware could not recover the IO
- * with sequence level error
- * logic and hence host needs to retry
- * this IO with a different IO tag
- * - io-tag cannot be used yet.
- *
- * BFI_IOIM_STS_NEXUS_ABORT : Second Level Error Recovery from host
- * is required because 2 consecutive ABTS
- * timedout and host needs logout and
- * re-login with the target
- * - io-tag cannot be used yet.
- *
- * BFI_IOIM_STS_UNDERRUN : IO completed with SCSI status good,
- * but the data tranferred is less than
- * the fcp data length in the command.
- * ex. SCSI INQUIRY where transferred
- * data length and residue count in FCP
- * response accounts for total fcp-dl
- * - io-tag can be reused.
- *
- * BFI_IOIM_STS_OVERRUN : IO completed with SCSI status good,
- * but the data transerred is more than
- * fcp data length in the command. ex.
- * TAPE IOs where blocks can of unequal
- * lengths.
- * - io-tag can be reused.
- *
- * BFI_IOIM_STS_RES_FREE : Firmware has completed using io-tag
- * during abort process
- * - io-tag can be reused.
- *
- * BFI_IOIM_STS_PROTO_ERR : Firmware detected a protocol error.
- * ex target sent more data than
- * requested, or there was data frame
- * loss and other reasons
- * - io-tag cannot be used yet.
- *
- * BFI_IOIM_STS_DIF_ERR : Firwmare detected DIF error. ex: DIF
- * CRC err or Ref Tag err or App tag err.
- * - io-tag can be reused.
- *
- * BFA_IOIM_STS_TSK_MGT_ABORT : IO was aborted because of Task
- * Management command from the host
- * - io-tag can be reused.
- *
- * BFI_IOIM_STS_UTAG : Firmware does not know about this
- * io_tag.
- * - io-tag can be reused.
- */
-enum bfi_ioim_status {
- BFI_IOIM_STS_OK = 0,
- BFI_IOIM_STS_HOST_ABORTED = 1,
- BFI_IOIM_STS_ABORTED = 2,
- BFI_IOIM_STS_TIMEDOUT = 3,
- BFI_IOIM_STS_RES_FREE = 4,
- BFI_IOIM_STS_SQER_NEEDED = 5,
- BFI_IOIM_STS_PROTO_ERR = 6,
- BFI_IOIM_STS_UTAG = 7,
- BFI_IOIM_STS_PATHTOV = 8,
-};
-
-#define BFI_IOIM_SNSLEN (256)
-/**
- * I/O response message
- */
-struct bfi_ioim_rsp_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u16 io_tag; /* completed IO tag */
- u16 bfa_rport_hndl; /* releated rport handle */
- u8 io_status; /* IO completion status */
- u8 reuse_io_tag; /* IO tag can be reused */
- u16 abort_tag; /* host abort request tag */
- u8 scsi_status; /* scsi status from target */
- u8 sns_len; /* scsi sense length */
- u8 resid_flags; /* IO residue flags */
- u8 rsvd_a;
- u32 residue; /* IO residual length in bytes */
- u32 rsvd_b[3];
-};
-
-struct bfi_ioim_abort_req_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u16 io_tag; /* I/O tag */
- u16 abort_tag; /* unique request tag */
-};
-
-/*
- * Initiator mode task management command interface defines.
- */
-
-enum bfi_tskim_h2i {
- BFI_TSKIM_H2I_TM_REQ = 1, /* task-mgmt command */
- BFI_TSKIM_H2I_ABORT_REQ = 2, /* task-mgmt command */
-};
-
-enum bfi_tskim_i2h {
- BFI_TSKIM_I2H_TM_RSP = BFA_I2HM(1),
-};
-
-struct bfi_tskim_req_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u16 tsk_tag; /* task management tag */
- u16 itn_fhdl; /* itn firmware handle */
- lun_t lun; /* LU number */
- u8 tm_flags; /* see fcp_tm_cmnd_t */
- u8 t_secs; /* Timeout value in seconds */
- u8 rsvd[2];
-};
-
-struct bfi_tskim_abortreq_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u16 tsk_tag; /* task management tag */
- u16 rsvd;
-};
-
-enum bfi_tskim_status {
- /*
- * Following are FCP-4 spec defined status codes,
- * **DO NOT CHANGE THEM **
- */
- BFI_TSKIM_STS_OK = 0,
- BFI_TSKIM_STS_NOT_SUPP = 4,
- BFI_TSKIM_STS_FAILED = 5,
-
- /**
- * Defined by BFA
- */
- BFI_TSKIM_STS_TIMEOUT = 10, /* TM request timedout */
- BFI_TSKIM_STS_ABORTED = 11, /* Aborted on host request */
-};
-
-struct bfi_tskim_rsp_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u16 tsk_tag; /* task mgmt cmnd tag */
- u8 tsk_status; /* @ref bfi_tskim_status */
- u8 rsvd;
-};
-
-#pragma pack()
-
-#endif /* __BFI_FCPIM_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_fcxp.h b/drivers/scsi/bfa/include/bfi/bfi_fcxp.h
deleted file mode 100644
index e0e995a..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_fcxp.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFI_FCXP_H__
-#define __BFI_FCXP_H__
-
-#include "bfi.h"
-
-#pragma pack(1)
-
-enum bfi_fcxp_h2i {
- BFI_FCXP_H2I_SEND_REQ = 1,
-};
-
-enum bfi_fcxp_i2h {
- BFI_FCXP_I2H_SEND_RSP = BFA_I2HM(1),
-};
-
-#define BFA_FCXP_MAX_SGES 2
-
-/**
- * FCXP send request structure
- */
-struct bfi_fcxp_send_req_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u16 fcxp_tag; /* driver request tag */
- u16 max_frmsz; /* max send frame size */
- u16 vf_id; /* vsan tag if applicable */
- u16 rport_fw_hndl; /* FW Handle for the remote port */
- u8 class; /* FC class used for req/rsp */
- u8 rsp_timeout; /* timeout in secs, 0-no response */
- u8 cts; /* continue sequence */
- u8 lp_tag; /* lport tag */
- struct fchs_s fchs; /* request FC header structure */
- u32 req_len; /* request payload length */
- u32 rsp_maxlen; /* max response length expected */
- struct bfi_sge_s req_sge[BFA_FCXP_MAX_SGES]; /* request buf */
- struct bfi_sge_s rsp_sge[BFA_FCXP_MAX_SGES]; /* response buf */
-};
-
-/**
- * FCXP send response structure
- */
-struct bfi_fcxp_send_rsp_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u16 fcxp_tag; /* send request tag */
- u8 req_status; /* request status */
- u8 rsvd;
- u32 rsp_len; /* actual response length */
- u32 residue_len; /* residual response length */
- struct fchs_s fchs; /* response FC header structure */
-};
-
-#pragma pack()
-
-#endif /* __BFI_FCXP_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_ioc.h b/drivers/scsi/bfa/include/bfi/bfi_ioc.h
deleted file mode 100644
index 450ded6..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_ioc.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFI_IOC_H__
-#define __BFI_IOC_H__
-
-#include "bfi.h"
-#include <defs/bfa_defs_ioc.h>
-
-#pragma pack(1)
-
-enum bfi_ioc_h2i_msgs {
- BFI_IOC_H2I_ENABLE_REQ = 1,
- BFI_IOC_H2I_DISABLE_REQ = 2,
- BFI_IOC_H2I_GETATTR_REQ = 3,
- BFI_IOC_H2I_DBG_SYNC = 4,
- BFI_IOC_H2I_DBG_DUMP = 5,
-};
-
-enum bfi_ioc_i2h_msgs {
- BFI_IOC_I2H_ENABLE_REPLY = BFA_I2HM(1),
- BFI_IOC_I2H_DISABLE_REPLY = BFA_I2HM(2),
- BFI_IOC_I2H_GETATTR_REPLY = BFA_I2HM(3),
- BFI_IOC_I2H_READY_EVENT = BFA_I2HM(4),
- BFI_IOC_I2H_HBEAT = BFA_I2HM(5),
-};
-
-/**
- * BFI_IOC_H2I_GETATTR_REQ message
- */
-struct bfi_ioc_getattr_req_s {
- struct bfi_mhdr_s mh;
- union bfi_addr_u attr_addr;
-};
-
-struct bfi_ioc_attr_s {
- wwn_t mfg_pwwn; /* Mfg port wwn */
- wwn_t mfg_nwwn; /* Mfg node wwn */
- mac_t mfg_mac; /* Mfg mac */
- u16 rsvd_a;
- wwn_t pwwn;
- wwn_t nwwn;
- mac_t mac; /* PBC or Mfg mac */
- u16 rsvd_b;
- char brcd_serialnum[STRSZ(BFA_MFG_SERIALNUM_SIZE)];
- u8 pcie_gen;
- u8 pcie_lanes_orig;
- u8 pcie_lanes;
- u8 rx_bbcredit; /* receive buffer credits */
- u32 adapter_prop; /* adapter properties */
- u16 maxfrsize; /* max receive frame size */
- char asic_rev;
- u8 rsvd_c;
- char fw_version[BFA_VERSION_LEN];
- char optrom_version[BFA_VERSION_LEN];
- struct bfa_mfg_vpd_s vpd;
- u32 card_type; /* card type */
-};
-
-/**
- * BFI_IOC_I2H_GETATTR_REPLY message
- */
-struct bfi_ioc_getattr_reply_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u8 status; /* cfg reply status */
- u8 rsvd[3];
-};
-
-/**
- * Firmware memory page offsets
- */
-#define BFI_IOC_SMEM_PG0_CB (0x40)
-#define BFI_IOC_SMEM_PG0_CT (0x180)
-
-/**
- * Firmware trace offset
- */
-#define BFI_IOC_TRC_OFF (0x4b00)
-#define BFI_IOC_TRC_ENTS 256
-
-#define BFI_IOC_FW_SIGNATURE (0xbfadbfad)
-#define BFI_IOC_MD5SUM_SZ 4
-struct bfi_ioc_image_hdr_s {
- u32 signature; /* constant signature */
- u32 rsvd_a;
- u32 exec; /* exec vector */
- u32 param; /* parameters */
- u32 rsvd_b[4];
- u32 md5sum[BFI_IOC_MD5SUM_SZ];
-};
-
-/**
- * BFI_IOC_I2H_READY_EVENT message
- */
-struct bfi_ioc_rdy_event_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 init_status; /* init event status */
- u8 rsvd[3];
-};
-
-struct bfi_ioc_hbeat_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u32 hb_count; /* current heart beat count */
-};
-
-/**
- * IOC hardware/firmware state
- */
-enum bfi_ioc_state {
- BFI_IOC_UNINIT = 0, /* not initialized */
- BFI_IOC_INITING = 1, /* h/w is being initialized */
- BFI_IOC_HWINIT = 2, /* h/w is initialized */
- BFI_IOC_CFG = 3, /* IOC configuration in progress */
- BFI_IOC_OP = 4, /* IOC is operational */
- BFI_IOC_DISABLING = 5, /* IOC is being disabled */
- BFI_IOC_DISABLED = 6, /* IOC is disabled */
- BFI_IOC_CFG_DISABLED = 7, /* IOC is being disabled;transient */
- BFI_IOC_FAIL = 8, /* IOC heart-beat failure */
- BFI_IOC_MEMTEST = 9, /* IOC is doing memtest */
-};
-
-#define BFI_IOC_ENDIAN_SIG 0x12345678
-
-enum {
- BFI_ADAPTER_TYPE_FC = 0x01, /* FC adapters */
- BFI_ADAPTER_TYPE_MK = 0x0f0000, /* adapter type mask */
- BFI_ADAPTER_TYPE_SH = 16, /* adapter type shift */
- BFI_ADAPTER_NPORTS_MK = 0xff00, /* number of ports mask */
- BFI_ADAPTER_NPORTS_SH = 8, /* number of ports shift */
- BFI_ADAPTER_SPEED_MK = 0xff, /* adapter speed mask */
- BFI_ADAPTER_SPEED_SH = 0, /* adapter speed shift */
- BFI_ADAPTER_PROTO = 0x100000, /* prototype adapaters */
- BFI_ADAPTER_TTV = 0x200000, /* TTV debug capable */
- BFI_ADAPTER_UNSUPP = 0x400000, /* unknown adapter type */
-};
-
-#define BFI_ADAPTER_GETP(__prop, __adap_prop) \
- (((__adap_prop) & BFI_ADAPTER_ ## __prop ## _MK) >> \
- BFI_ADAPTER_ ## __prop ## _SH)
-#define BFI_ADAPTER_SETP(__prop, __val) \
- ((__val) << BFI_ADAPTER_ ## __prop ## _SH)
-#define BFI_ADAPTER_IS_PROTO(__adap_type) \
- ((__adap_type) & BFI_ADAPTER_PROTO)
-#define BFI_ADAPTER_IS_TTV(__adap_type) \
- ((__adap_type) & BFI_ADAPTER_TTV)
-#define BFI_ADAPTER_IS_UNSUPP(__adap_type) \
- ((__adap_type) & BFI_ADAPTER_UNSUPP)
-#define BFI_ADAPTER_IS_SPECIAL(__adap_type) \
- ((__adap_type) & (BFI_ADAPTER_TTV | BFI_ADAPTER_PROTO | \
- BFI_ADAPTER_UNSUPP))
-
-/**
- * BFI_IOC_H2I_ENABLE_REQ & BFI_IOC_H2I_DISABLE_REQ messages
- */
-struct bfi_ioc_ctrl_req_s {
- struct bfi_mhdr_s mh;
- u8 ioc_class;
- u8 rsvd[3];
-};
-
-/**
- * BFI_IOC_I2H_ENABLE_REPLY & BFI_IOC_I2H_DISABLE_REPLY messages
- */
-struct bfi_ioc_ctrl_reply_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u8 status; /* enable/disable status */
- u8 rsvd[3];
-};
-
-#define BFI_IOC_MSGSZ 8
-/**
- * H2I Messages
- */
-union bfi_ioc_h2i_msg_u {
- struct bfi_mhdr_s mh;
- struct bfi_ioc_ctrl_req_s enable_req;
- struct bfi_ioc_ctrl_req_s disable_req;
- struct bfi_ioc_getattr_req_s getattr_req;
- u32 mboxmsg[BFI_IOC_MSGSZ];
-};
-
-/**
- * I2H Messages
- */
-union bfi_ioc_i2h_msg_u {
- struct bfi_mhdr_s mh;
- struct bfi_ioc_rdy_event_s rdy_event;
- u32 mboxmsg[BFI_IOC_MSGSZ];
-};
-
-#pragma pack()
-
-#endif /* __BFI_IOC_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_iocfc.h b/drivers/scsi/bfa/include/bfi/bfi_iocfc.h
deleted file mode 100644
index ccdfcc5..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_iocfc.h
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFI_IOCFC_H__
-#define __BFI_IOCFC_H__
-
-#include "bfi.h"
-#include <bfi/bfi_pbc.h>
-#include <defs/bfa_defs_ioc.h>
-#include <defs/bfa_defs_iocfc.h>
-#include <defs/bfa_defs_boot.h>
-
-#pragma pack(1)
-
-enum bfi_iocfc_h2i_msgs {
- BFI_IOCFC_H2I_CFG_REQ = 1,
- BFI_IOCFC_H2I_GET_STATS_REQ = 2,
- BFI_IOCFC_H2I_CLEAR_STATS_REQ = 3,
- BFI_IOCFC_H2I_SET_INTR_REQ = 4,
- BFI_IOCFC_H2I_UPDATEQ_REQ = 5,
-};
-
-enum bfi_iocfc_i2h_msgs {
- BFI_IOCFC_I2H_CFG_REPLY = BFA_I2HM(1),
- BFI_IOCFC_I2H_GET_STATS_RSP = BFA_I2HM(2),
- BFI_IOCFC_I2H_CLEAR_STATS_RSP = BFA_I2HM(3),
- BFI_IOCFC_I2H_UPDATEQ_RSP = BFA_I2HM(5),
-};
-
-struct bfi_iocfc_cfg_s {
- u8 num_cqs; /* Number of CQs to be used */
- u8 sense_buf_len; /* SCSI sense length */
- u8 trunk_enabled; /* port trunking enabled */
- u8 trunk_ports; /* trunk ports bit map */
- u32 endian_sig; /* endian signature of host */
-
- /**
- * Request and response circular queue base addresses, size and
- * shadow index pointers.
- */
- union bfi_addr_u req_cq_ba[BFI_IOC_MAX_CQS];
- union bfi_addr_u req_shadow_ci[BFI_IOC_MAX_CQS];
- u16 req_cq_elems[BFI_IOC_MAX_CQS];
- union bfi_addr_u rsp_cq_ba[BFI_IOC_MAX_CQS];
- union bfi_addr_u rsp_shadow_pi[BFI_IOC_MAX_CQS];
- u16 rsp_cq_elems[BFI_IOC_MAX_CQS];
-
- union bfi_addr_u stats_addr; /* DMA-able address for stats */
- union bfi_addr_u cfgrsp_addr; /* config response dma address */
- union bfi_addr_u ioim_snsbase; /* IO sense buffer base address */
- struct bfa_iocfc_intr_attr_s intr_attr; /* IOC interrupt attributes */
-};
-
-/**
- * Boot target wwn information for this port. This contains either the stored
- * or discovered boot target port wwns for the port.
- */
-struct bfi_iocfc_bootwwns {
- wwn_t wwn[BFA_BOOT_BOOTLUN_MAX];
- u8 nwwns;
- u8 rsvd[7];
-};
-
-struct bfi_iocfc_cfgrsp_s {
- struct bfa_iocfc_fwcfg_s fwcfg;
- struct bfa_iocfc_intr_attr_s intr_attr;
- struct bfi_iocfc_bootwwns bootwwns;
- struct bfi_pbc_s pbc_cfg;
-};
-
-/**
- * BFI_IOCFC_H2I_CFG_REQ message
- */
-struct bfi_iocfc_cfg_req_s {
- struct bfi_mhdr_s mh;
- union bfi_addr_u ioc_cfg_dma_addr;
-};
-
-/**
- * BFI_IOCFC_I2H_CFG_REPLY message
- */
-struct bfi_iocfc_cfg_reply_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u8 cfg_success; /* cfg reply status */
- u8 lpu_bm; /* LPUs assigned for this IOC */
- u8 rsvd[2];
-};
-
-/**
- * BFI_IOCFC_H2I_GET_STATS_REQ & BFI_IOCFC_H2I_CLEAR_STATS_REQ messages
- */
-struct bfi_iocfc_stats_req_s {
- struct bfi_mhdr_s mh; /* msg header */
- u32 msgtag; /* msgtag for reply */
-};
-
-/**
- * BFI_IOCFC_I2H_GET_STATS_RSP & BFI_IOCFC_I2H_CLEAR_STATS_RSP messages
- */
-struct bfi_iocfc_stats_rsp_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 status; /* reply status */
- u8 rsvd[3];
- u32 msgtag; /* msgtag for reply */
-};
-
-/**
- * BFI_IOCFC_H2I_SET_INTR_REQ message
- */
-struct bfi_iocfc_set_intr_req_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 coalesce; /* enable intr coalescing*/
- u8 rsvd[3];
- u16 delay; /* delay timer 0..1125us */
- u16 latency; /* latency timer 0..225us */
-};
-
-/**
- * BFI_IOCFC_H2I_UPDATEQ_REQ message
- */
-struct bfi_iocfc_updateq_req_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u32 reqq_ba; /* reqq base addr */
- u32 rspq_ba; /* rspq base addr */
- u32 reqq_sci; /* reqq shadow ci */
- u32 rspq_spi; /* rspq shadow pi */
-};
-
-/**
- * BFI_IOCFC_I2H_UPDATEQ_RSP message
- */
-struct bfi_iocfc_updateq_rsp_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 status; /* updateq status */
- u8 rsvd[3];
-};
-
-/**
- * H2I Messages
- */
-union bfi_iocfc_h2i_msg_u {
- struct bfi_mhdr_s mh;
- struct bfi_iocfc_cfg_req_s cfg_req;
- struct bfi_iocfc_stats_req_s stats_get;
- struct bfi_iocfc_stats_req_s stats_clr;
- struct bfi_iocfc_updateq_req_s updateq_req;
- u32 mboxmsg[BFI_IOC_MSGSZ];
-};
-
-/**
- * I2H Messages
- */
-union bfi_iocfc_i2h_msg_u {
- struct bfi_mhdr_s mh;
- struct bfi_iocfc_cfg_reply_s cfg_reply;
- struct bfi_iocfc_stats_rsp_s stats_get_rsp;
- struct bfi_iocfc_stats_rsp_s stats_clr_rsp;
- struct bfi_iocfc_updateq_rsp_s updateq_rsp;
- u32 mboxmsg[BFI_IOC_MSGSZ];
-};
-
-#pragma pack()
-
-#endif /* __BFI_IOCFC_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_lport.h b/drivers/scsi/bfa/include/bfi/bfi_lport.h
deleted file mode 100644
index 2901061..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_lport.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFI_LPORT_H__
-#define __BFI_LPORT_H__
-
-#include <bfi/bfi.h>
-
-#pragma pack(1)
-
-enum bfi_lport_h2i_msgs {
- BFI_LPORT_H2I_CREATE_REQ = 1,
- BFI_LPORT_H2I_DELETE_REQ = 2,
-};
-
-enum bfi_lport_i2h_msgs {
- BFI_LPORT_I2H_CREATE_RSP = BFA_I2HM(1),
- BFI_LPORT_I2H_DELETE_RSP = BFA_I2HM(2),
- BFI_LPORT_I2H_ONLINE = BFA_I2HM(3),
- BFI_LPORT_I2H_OFFLINE = BFA_I2HM(4),
-};
-
-#define BFI_LPORT_MAX_SYNNAME 64
-
-enum bfi_lport_role_e {
- BFI_LPORT_ROLE_FCPIM = 1,
- BFI_LPORT_ROLE_FCPTM = 2,
- BFI_LPORT_ROLE_IPFC = 4,
-};
-
-struct bfi_lport_create_req_s {
- bfi_mhdr_t mh; /* common msg header */
- u16 fabric_fwhdl; /* parent fabric instance */
- u8 roles; /* lport FC-4 roles */
- u8 rsvd;
- wwn_t pwwn; /* port name */
- wwn_t nwwn; /* node name */
- u8 symname[BFI_LPORT_MAX_SYNNAME];
-};
-
-struct bfi_lport_create_rsp_s {
- bfi_mhdr_t mh; /* common msg header */
- u8 status; /* lport creation status */
- u8 rsvd[3];
-};
-
-struct bfi_lport_delete_req_s {
- bfi_mhdr_t mh; /* common msg header */
- u16 fw_handle; /* firmware lport handle */
- u16 rsvd;
-};
-
-struct bfi_lport_delete_rsp_s {
- bfi_mhdr_t mh; /* common msg header */
- u16 bfa_handle; /* host lport handle */
- u8 status; /* lport deletion status */
- u8 rsvd;
-};
-
-union bfi_lport_h2i_msg_u {
- bfi_msg_t *msg;
- struct bfi_lport_create_req_s *create_req;
- struct bfi_lport_delete_req_s *delete_req;
-};
-
-union bfi_lport_i2h_msg_u {
- bfi_msg_t *msg;
- struct bfi_lport_create_rsp_s *create_rsp;
- struct bfi_lport_delete_rsp_s *delete_rsp;
-};
-
-#pragma pack()
-
-#endif /* __BFI_LPORT_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_lps.h b/drivers/scsi/bfa/include/bfi/bfi_lps.h
deleted file mode 100644
index 7ed31bb..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_lps.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFI_LPS_H__
-#define __BFI_LPS_H__
-
-#include <bfi/bfi.h>
-
-#pragma pack(1)
-
-enum bfi_lps_h2i_msgs {
- BFI_LPS_H2I_LOGIN_REQ = 1,
- BFI_LPS_H2I_LOGOUT_REQ = 2,
-};
-
-enum bfi_lps_i2h_msgs {
- BFI_LPS_H2I_LOGIN_RSP = BFA_I2HM(1),
- BFI_LPS_H2I_LOGOUT_RSP = BFA_I2HM(2),
- BFI_LPS_H2I_CVL_EVENT = BFA_I2HM(3),
-};
-
-struct bfi_lps_login_req_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 lp_tag;
- u8 alpa;
- u16 pdu_size;
- wwn_t pwwn;
- wwn_t nwwn;
- u8 fdisc;
- u8 auth_en;
- u8 rsvd[2];
-};
-
-struct bfi_lps_login_rsp_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 lp_tag;
- u8 status;
- u8 lsrjt_rsn;
- u8 lsrjt_expl;
- wwn_t port_name;
- wwn_t node_name;
- u16 bb_credit;
- u8 f_port;
- u8 npiv_en;
- u32 lp_pid:24;
- u32 auth_req:8;
- mac_t lp_mac;
- mac_t fcf_mac;
- u8 ext_status;
- u8 brcd_switch;/* attached peer is brcd switch */
-};
-
-struct bfi_lps_logout_req_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 lp_tag;
- u8 rsvd[3];
- wwn_t port_name;
-};
-
-struct bfi_lps_logout_rsp_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 lp_tag;
- u8 status;
- u8 rsvd[2];
-};
-
-struct bfi_lps_cvl_event_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 lp_tag;
- u8 rsvd[3];
-};
-
-union bfi_lps_h2i_msg_u {
- struct bfi_mhdr_s *msg;
- struct bfi_lps_login_req_s *login_req;
- struct bfi_lps_logout_req_s *logout_req;
-};
-
-union bfi_lps_i2h_msg_u {
- struct bfi_msg_s *msg;
- struct bfi_lps_login_rsp_s *login_rsp;
- struct bfi_lps_logout_rsp_s *logout_rsp;
- struct bfi_lps_cvl_event_s *cvl_event;
-};
-
-#pragma pack()
-
-#endif /* __BFI_LPS_H__ */
-
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_pbc.h b/drivers/scsi/bfa/include/bfi/bfi_pbc.h
deleted file mode 100644
index 88a4154..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_pbc.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFI_PBC_H__
-#define __BFI_PBC_H__
-
-#pragma pack(1)
-
-#define BFI_PBC_MAX_BLUNS 8
-#define BFI_PBC_MAX_VPORTS 16
-
-#define BFI_PBC_PORT_DISABLED 2
-/**
- * PBC boot lun configuration
- */
-struct bfi_pbc_blun_s {
- wwn_t tgt_pwwn;
- lun_t tgt_lun;
-};
-
-/**
- * PBC virtual port configuration
- */
-struct bfi_pbc_vport_s {
- wwn_t vp_pwwn;
- wwn_t vp_nwwn;
-};
-
-/**
- * BFI pre-boot configuration information
- */
-struct bfi_pbc_s {
- u8 port_enabled;
- u8 boot_enabled;
- u8 nbluns;
- u8 nvports;
- u8 port_speed;
- u8 rsvd_a;
- u16 hss;
- wwn_t pbc_pwwn;
- wwn_t pbc_nwwn;
- struct bfi_pbc_blun_s blun[BFI_PBC_MAX_BLUNS];
- struct bfi_pbc_vport_s vport[BFI_PBC_MAX_VPORTS];
-};
-
-#pragma pack()
-
-#endif /* __BFI_PBC_H__ */
diff --git a/drivers/scsi/bfa/include/bfi/bfi_port.h b/drivers/scsi/bfa/include/bfi/bfi_port.h
deleted file mode 100644
index 3ec3bea..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_port.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-#ifndef __BFI_PORT_H__
-#define __BFI_PORT_H__
-
-#include <bfi/bfi.h>
-#include <defs/bfa_defs_pport.h>
-
-#pragma pack(1)
-
-enum bfi_port_h2i {
- BFI_PORT_H2I_ENABLE_REQ = (1),
- BFI_PORT_H2I_DISABLE_REQ = (2),
- BFI_PORT_H2I_GET_STATS_REQ = (3),
- BFI_PORT_H2I_CLEAR_STATS_REQ = (4),
-};
-
-enum bfi_port_i2h {
- BFI_PORT_I2H_ENABLE_RSP = BFA_I2HM(1),
- BFI_PORT_I2H_DISABLE_RSP = BFA_I2HM(2),
- BFI_PORT_I2H_GET_STATS_RSP = BFA_I2HM(3),
- BFI_PORT_I2H_CLEAR_STATS_RSP = BFA_I2HM(4),
-};
-
-/**
- * Generic REQ type
- */
-struct bfi_port_generic_req_s {
- struct bfi_mhdr_s mh; /* msg header */
- u32 msgtag; /* msgtag for reply */
- u32 rsvd;
-};
-
-/**
- * Generic RSP type
- */
-struct bfi_port_generic_rsp_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 status; /* port enable status */
- u8 rsvd[3];
- u32 msgtag; /* msgtag for reply */
-};
-
-/**
- * @todo
- * BFI_PORT_H2I_ENABLE_REQ
- */
-
-/**
- * @todo
- * BFI_PORT_I2H_ENABLE_RSP
- */
-
-/**
- * BFI_PORT_H2I_DISABLE_REQ
- */
-
-/**
- * BFI_PORT_I2H_DISABLE_RSP
- */
-
-/**
- * BFI_PORT_H2I_GET_STATS_REQ
- */
-struct bfi_port_get_stats_req_s {
- struct bfi_mhdr_s mh; /* common msg header */
- union bfi_addr_u dma_addr;
-};
-
-/**
- * BFI_PORT_I2H_GET_STATS_RSP
- */
-
-/**
- * BFI_PORT_H2I_CLEAR_STATS_REQ
- */
-
-/**
- * BFI_PORT_I2H_CLEAR_STATS_RSP
- */
-
-union bfi_port_h2i_msg_u {
- struct bfi_mhdr_s mh;
- struct bfi_port_generic_req_s enable_req;
- struct bfi_port_generic_req_s disable_req;
- struct bfi_port_get_stats_req_s getstats_req;
- struct bfi_port_generic_req_s clearstats_req;
-};
-
-union bfi_port_i2h_msg_u {
- struct bfi_mhdr_s mh;
- struct bfi_port_generic_rsp_s enable_rsp;
- struct bfi_port_generic_rsp_s disable_rsp;
- struct bfi_port_generic_rsp_s getstats_rsp;
- struct bfi_port_generic_rsp_s clearstats_rsp;
-};
-
-#pragma pack()
-
-#endif /* __BFI_PORT_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_pport.h b/drivers/scsi/bfa/include/bfi/bfi_pport.h
deleted file mode 100644
index 50dcf45..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_pport.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-#ifndef __BFI_PPORT_H__
-#define __BFI_PPORT_H__
-
-#include <bfi/bfi.h>
-#include <defs/bfa_defs_pport.h>
-
-#pragma pack(1)
-
-enum bfi_fcport_h2i {
- BFI_FCPORT_H2I_ENABLE_REQ = (1),
- BFI_FCPORT_H2I_DISABLE_REQ = (2),
- BFI_FCPORT_H2I_SET_SVC_PARAMS_REQ = (3),
- BFI_FCPORT_H2I_STATS_GET_REQ = (4),
- BFI_FCPORT_H2I_STATS_CLEAR_REQ = (5),
-};
-
-enum bfi_fcport_i2h {
- BFI_FCPORT_I2H_ENABLE_RSP = BFA_I2HM(1),
- BFI_FCPORT_I2H_DISABLE_RSP = BFA_I2HM(2),
- BFI_FCPORT_I2H_SET_SVC_PARAMS_RSP = BFA_I2HM(3),
- BFI_FCPORT_I2H_STATS_GET_RSP = BFA_I2HM(4),
- BFI_FCPORT_I2H_STATS_CLEAR_RSP = BFA_I2HM(5),
- BFI_FCPORT_I2H_EVENT = BFA_I2HM(6),
-};
-
-/**
- * Generic REQ type
- */
-struct bfi_fcport_req_s {
- struct bfi_mhdr_s mh; /* msg header */
- u32 msgtag; /* msgtag for reply */
-};
-
-/**
- * Generic RSP type
- */
-struct bfi_fcport_rsp_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 status; /* port enable status */
- u8 rsvd[3];
- u32 msgtag; /* msgtag for reply */
-};
-
-/**
- * BFI_FCPORT_H2I_ENABLE_REQ
- */
-struct bfi_fcport_enable_req_s {
- struct bfi_mhdr_s mh; /* msg header */
- u32 rsvd1;
- wwn_t nwwn; /* node wwn of physical port */
- wwn_t pwwn; /* port wwn of physical port */
- struct bfa_pport_cfg_s port_cfg; /* port configuration */
- union bfi_addr_u stats_dma_addr; /* DMA address for stats */
- u32 msgtag; /* msgtag for reply */
- u32 rsvd2;
-};
-
-/**
- * BFI_FCPORT_H2I_SET_SVC_PARAMS_REQ
- */
-struct bfi_fcport_set_svc_params_req_s {
- struct bfi_mhdr_s mh; /* msg header */
- u16 tx_bbcredit; /* Tx credits */
- u16 rsvd;
-};
-
-/**
- * BFI_FCPORT_I2H_EVENT
- */
-struct bfi_fcport_event_s {
- struct bfi_mhdr_s mh; /* common msg header */
- struct bfa_pport_link_s link_state;
-};
-
-/**
- * fcport H2I message
- */
-union bfi_fcport_h2i_msg_u {
- struct bfi_mhdr_s *mhdr;
- struct bfi_fcport_enable_req_s *penable;
- struct bfi_fcport_req_s *pdisable;
- struct bfi_fcport_set_svc_params_req_s *psetsvcparams;
- struct bfi_fcport_req_s *pstatsget;
- struct bfi_fcport_req_s *pstatsclear;
-};
-
-/**
- * fcport I2H message
- */
-union bfi_fcport_i2h_msg_u {
- struct bfi_msg_s *msg;
- struct bfi_fcport_rsp_s *penable_rsp;
- struct bfi_fcport_rsp_s *pdisable_rsp;
- struct bfi_fcport_rsp_s *psetsvcparams_rsp;
- struct bfi_fcport_rsp_s *pstatsget_rsp;
- struct bfi_fcport_rsp_s *pstatsclear_rsp;
- struct bfi_fcport_event_s *event;
-};
-
-#pragma pack()
-
-#endif /* __BFI_PPORT_H__ */
diff --git a/drivers/scsi/bfa/include/bfi/bfi_rport.h b/drivers/scsi/bfa/include/bfi/bfi_rport.h
deleted file mode 100644
index e1cd83b..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_rport.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFI_RPORT_H__
-#define __BFI_RPORT_H__
-
-#include <bfi/bfi.h>
-
-#pragma pack(1)
-
-enum bfi_rport_h2i_msgs {
- BFI_RPORT_H2I_CREATE_REQ = 1,
- BFI_RPORT_H2I_DELETE_REQ = 2,
- BFI_RPORT_H2I_SET_SPEED_REQ = 3,
-};
-
-enum bfi_rport_i2h_msgs {
- BFI_RPORT_I2H_CREATE_RSP = BFA_I2HM(1),
- BFI_RPORT_I2H_DELETE_RSP = BFA_I2HM(2),
- BFI_RPORT_I2H_QOS_SCN = BFA_I2HM(3),
-};
-
-struct bfi_rport_create_req_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u16 bfa_handle; /* host rport handle */
- u16 max_frmsz; /* max rcv pdu size */
- u32 pid:24, /* remote port ID */
- lp_tag:8; /* local port tag */
- u32 local_pid:24, /* local port ID */
- cisc:8;
- u8 fc_class; /* supported FC classes */
- u8 vf_en; /* virtual fabric enable */
- u16 vf_id; /* virtual fabric ID */
-};
-
-struct bfi_rport_create_rsp_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 status; /* rport creation status */
- u8 rsvd[3];
- u16 bfa_handle; /* host rport handle */
- u16 fw_handle; /* firmware rport handle */
- struct bfa_rport_qos_attr_s qos_attr; /* QoS Attributes */
-};
-
-struct bfa_rport_speed_req_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u16 fw_handle; /* firmware rport handle */
- u8 speed; /*! rport's speed via RPSC */
- u8 rsvd;
-};
-
-struct bfi_rport_delete_req_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u16 fw_handle; /* firmware rport handle */
- u16 rsvd;
-};
-
-struct bfi_rport_delete_rsp_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u16 bfa_handle; /* host rport handle */
- u8 status; /* rport deletion status */
- u8 rsvd;
-};
-
-struct bfi_rport_qos_scn_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u16 bfa_handle; /* host rport handle */
- u16 rsvd;
- struct bfa_rport_qos_attr_s old_qos_attr; /* Old QoS Attributes */
- struct bfa_rport_qos_attr_s new_qos_attr; /* New QoS Attributes */
-};
-
-union bfi_rport_h2i_msg_u {
- struct bfi_msg_s *msg;
- struct bfi_rport_create_req_s *create_req;
- struct bfi_rport_delete_req_s *delete_req;
- struct bfi_rport_speed_req_s *speed_req;
-};
-
-union bfi_rport_i2h_msg_u {
- struct bfi_msg_s *msg;
- struct bfi_rport_create_rsp_s *create_rsp;
- struct bfi_rport_delete_rsp_s *delete_rsp;
- struct bfi_rport_qos_scn_s *qos_scn_evt;
-};
-
-#pragma pack()
-
-#endif /* __BFI_RPORT_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_uf.h b/drivers/scsi/bfa/include/bfi/bfi_uf.h
deleted file mode 100644
index f328a9e..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_uf.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFI_UF_H__
-#define __BFI_UF_H__
-
-#include "bfi.h"
-
-#pragma pack(1)
-
-enum bfi_uf_h2i {
- BFI_UF_H2I_BUF_POST = 1,
-};
-
-enum bfi_uf_i2h {
- BFI_UF_I2H_FRM_RCVD = BFA_I2HM(1),
-};
-
-#define BFA_UF_MAX_SGES 2
-
-struct bfi_uf_buf_post_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u16 buf_tag; /* buffer tag */
- u16 buf_len; /* total buffer length */
- struct bfi_sge_s sge[BFA_UF_MAX_SGES]; /* buffer DMA SGEs */
-};
-
-struct bfi_uf_frm_rcvd_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u16 buf_tag; /* buffer tag */
- u16 rsvd;
- u16 frm_len; /* received frame length */
- u16 xfr_len; /* tranferred length */
-};
-
-#pragma pack()
-
-#endif /* __BFI_UF_H__ */
diff --git a/drivers/scsi/bfa/include/cna/bfa_cna_trcmod.h b/drivers/scsi/bfa/include/cna/bfa_cna_trcmod.h
deleted file mode 100644
index a75a1f3..0000000
--- a/drivers/scsi/bfa/include/cna/bfa_cna_trcmod.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/**
- * bfa_cna_trcmod.h CNA trace modules
- */
-
-#ifndef __BFA_CNA_TRCMOD_H__
-#define __BFA_CNA_TRCMOD_H__
-
-#include <cs/bfa_trc.h>
-
-/*
- * !!! Only append to the enums defined here to avoid any versioning
- * !!! needed between trace utility and driver version
- */
-enum {
- BFA_TRC_CNA_CEE = 1,
- BFA_TRC_CNA_PORT = 2,
- BFA_TRC_CNA_IOC = 3,
- BFA_TRC_CNA_DIAG = 4,
- BFA_TRC_CNA_IOC_CB = 5,
- BFA_TRC_CNA_IOC_CT = 6,
-};
-
-#endif /* __BFA_CNA_TRCMOD_H__ */
diff --git a/drivers/scsi/bfa/include/cna/cee/bfa_cee.h b/drivers/scsi/bfa/include/cna/cee/bfa_cee.h
deleted file mode 100644
index 77f297f..0000000
--- a/drivers/scsi/bfa/include/cna/cee/bfa_cee.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFA_CEE_H__
-#define __BFA_CEE_H__
-
-#include <defs/bfa_defs_cee.h>
-#include <bfa_ioc.h>
-#include <cs/bfa_trc.h>
-#include <cs/bfa_log.h>
-
-typedef void (*bfa_cee_get_attr_cbfn_t) (void *dev, bfa_status_t status);
-typedef void (*bfa_cee_get_stats_cbfn_t) (void *dev, bfa_status_t status);
-typedef void (*bfa_cee_reset_stats_cbfn_t) (void *dev, bfa_status_t status);
-typedef void (*bfa_cee_hbfail_cbfn_t) (void *dev, bfa_status_t status);
-
-struct bfa_cee_cbfn_s {
- bfa_cee_get_attr_cbfn_t get_attr_cbfn;
- void *get_attr_cbarg;
- bfa_cee_get_stats_cbfn_t get_stats_cbfn;
- void *get_stats_cbarg;
- bfa_cee_reset_stats_cbfn_t reset_stats_cbfn;
- void *reset_stats_cbarg;
-};
-
-struct bfa_cee_s {
- void *dev;
- bfa_boolean_t get_attr_pending;
- bfa_boolean_t get_stats_pending;
- bfa_boolean_t reset_stats_pending;
- bfa_status_t get_attr_status;
- bfa_status_t get_stats_status;
- bfa_status_t reset_stats_status;
- struct bfa_cee_cbfn_s cbfn;
- struct bfa_ioc_hbfail_notify_s hbfail;
- struct bfa_trc_mod_s *trcmod;
- struct bfa_log_mod_s *logmod;
- struct bfa_cee_attr_s *attr;
- struct bfa_cee_stats_s *stats;
- struct bfa_dma_s attr_dma;
- struct bfa_dma_s stats_dma;
- struct bfa_ioc_s *ioc;
- struct bfa_mbox_cmd_s get_cfg_mb;
- struct bfa_mbox_cmd_s get_stats_mb;
- struct bfa_mbox_cmd_s reset_stats_mb;
-};
-
-u32 bfa_cee_meminfo(void);
-void bfa_cee_mem_claim(struct bfa_cee_s *cee, u8 *dma_kva,
- u64 dma_pa);
-void bfa_cee_attach(struct bfa_cee_s *cee, struct bfa_ioc_s *ioc, void *dev,
- struct bfa_trc_mod_s *trcmod,
- struct bfa_log_mod_s *logmod);
-void bfa_cee_detach(struct bfa_cee_s *cee);
-bfa_status_t bfa_cee_get_attr(struct bfa_cee_s *cee,
- struct bfa_cee_attr_s *attr,
- bfa_cee_get_attr_cbfn_t cbfn, void *cbarg);
-bfa_status_t bfa_cee_get_stats(struct bfa_cee_s *cee,
- struct bfa_cee_stats_s *stats,
- bfa_cee_get_stats_cbfn_t cbfn, void *cbarg);
-bfa_status_t bfa_cee_reset_stats(struct bfa_cee_s *cee,
- bfa_cee_reset_stats_cbfn_t cbfn, void *cbarg);
-#endif /* __BFA_CEE_H__ */
diff --git a/drivers/scsi/bfa/include/cna/port/bfa_port.h b/drivers/scsi/bfa/include/cna/port/bfa_port.h
deleted file mode 100644
index d7babaf..0000000
--- a/drivers/scsi/bfa/include/cna/port/bfa_port.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFA_PORT_H__
-#define __BFA_PORT_H__
-
-#include <defs/bfa_defs_port.h>
-#include <bfa_ioc.h>
-#include <cs/bfa_trc.h>
-#include <cs/bfa_log.h>
-
-typedef void (*bfa_port_stats_cbfn_t) (void *dev, bfa_status_t status);
-typedef void (*bfa_port_endis_cbfn_t) (void *dev, bfa_status_t status);
-
-struct bfa_port_s {
- void *dev;
- struct bfa_ioc_s *ioc;
- struct bfa_trc_mod_s *trcmod;
- struct bfa_log_mod_s *logmod;
- u32 msgtag;
- bfa_boolean_t stats_busy;
- struct bfa_mbox_cmd_s stats_mb;
- bfa_port_stats_cbfn_t stats_cbfn;
- void *stats_cbarg;
- bfa_status_t stats_status;
- u32 stats_reset_time;
- union bfa_pport_stats_u *stats;
- struct bfa_dma_s stats_dma;
- bfa_boolean_t endis_pending;
- struct bfa_mbox_cmd_s endis_mb;
- bfa_port_endis_cbfn_t endis_cbfn;
- void *endis_cbarg;
- bfa_status_t endis_status;
- struct bfa_ioc_hbfail_notify_s hbfail;
-};
-
-void bfa_port_attach(struct bfa_port_s *port, struct bfa_ioc_s *ioc,
- void *dev, struct bfa_trc_mod_s *trcmod,
- struct bfa_log_mod_s *logmod);
-void bfa_port_detach(struct bfa_port_s *port);
-void bfa_port_hbfail(void *arg);
-
-bfa_status_t bfa_port_get_stats(struct bfa_port_s *port,
- union bfa_pport_stats_u *stats,
- bfa_port_stats_cbfn_t cbfn, void *cbarg);
-bfa_status_t bfa_port_clear_stats(struct bfa_port_s *port,
- bfa_port_stats_cbfn_t cbfn, void *cbarg);
-bfa_status_t bfa_port_enable(struct bfa_port_s *port,
- bfa_port_endis_cbfn_t cbfn, void *cbarg);
-bfa_status_t bfa_port_disable(struct bfa_port_s *port,
- bfa_port_endis_cbfn_t cbfn, void *cbarg);
-u32 bfa_port_meminfo(void);
-void bfa_port_mem_claim(struct bfa_port_s *port, u8 *dma_kva,
- u64 dma_pa);
-
-#endif /* __BFA_PORT_H__ */
diff --git a/drivers/scsi/bfa/include/cna/pstats/ethport_defs.h b/drivers/scsi/bfa/include/cna/pstats/ethport_defs.h
deleted file mode 100644
index 1563ee5..0000000
--- a/drivers/scsi/bfa/include/cna/pstats/ethport_defs.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved.
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __ETHPORT_DEFS_H__
-#define __ETHPORT_DEFS_H__
-
-struct bnad_drv_stats {
- u64 netif_queue_stop;
- u64 netif_queue_wakeup;
- u64 tso4;
- u64 tso6;
- u64 tso_err;
- u64 tcpcsum_offload;
- u64 udpcsum_offload;
- u64 csum_help;
- u64 csum_help_err;
-
- u64 hw_stats_updates;
- u64 netif_rx_schedule;
- u64 netif_rx_complete;
- u64 netif_rx_dropped;
-};
-#endif
diff --git a/drivers/scsi/bfa/include/cna/pstats/phyport_defs.h b/drivers/scsi/bfa/include/cna/pstats/phyport_defs.h
deleted file mode 100644
index eb75480..0000000
--- a/drivers/scsi/bfa/include/cna/pstats/phyport_defs.h
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved.
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __PHYPORT_DEFS_H__
-#define __PHYPORT_DEFS_H__
-
-#define BNA_TXF_ID_MAX 64
-#define BNA_RXF_ID_MAX 64
-
-/*
- * Statistics
- */
-
-/*
- * TxF Frame Statistics
- */
-struct bna_stats_txf {
- u64 ucast_octets;
- u64 ucast;
- u64 ucast_vlan;
-
- u64 mcast_octets;
- u64 mcast;
- u64 mcast_vlan;
-
- u64 bcast_octets;
- u64 bcast;
- u64 bcast_vlan;
-
- u64 errors;
- u64 filter_vlan; /* frames filtered due to VLAN */
- u64 filter_mac_sa; /* frames filtered due to SA check */
-};
-
-/*
- * RxF Frame Statistics
- */
-struct bna_stats_rxf {
- u64 ucast_octets;
- u64 ucast;
- u64 ucast_vlan;
-
- u64 mcast_octets;
- u64 mcast;
- u64 mcast_vlan;
-
- u64 bcast_octets;
- u64 bcast;
- u64 bcast_vlan;
- u64 frame_drops;
-};
-
-/*
- * FC Tx Frame Statistics
- */
-struct bna_stats_fc_tx {
- u64 txf_ucast_octets;
- u64 txf_ucast;
- u64 txf_ucast_vlan;
-
- u64 txf_mcast_octets;
- u64 txf_mcast;
- u64 txf_mcast_vlan;
-
- u64 txf_bcast_octets;
- u64 txf_bcast;
- u64 txf_bcast_vlan;
-
- u64 txf_parity_errors;
- u64 txf_timeout;
- u64 txf_fid_parity_errors;
-};
-
-/*
- * FC Rx Frame Statistics
- */
-struct bna_stats_fc_rx {
- u64 rxf_ucast_octets;
- u64 rxf_ucast;
- u64 rxf_ucast_vlan;
-
- u64 rxf_mcast_octets;
- u64 rxf_mcast;
- u64 rxf_mcast_vlan;
-
- u64 rxf_bcast_octets;
- u64 rxf_bcast;
- u64 rxf_bcast_vlan;
-};
-
-/*
- * RAD Frame Statistics
- */
-struct cna_stats_rad {
- u64 rx_frames;
- u64 rx_octets;
- u64 rx_vlan_frames;
-
- u64 rx_ucast;
- u64 rx_ucast_octets;
- u64 rx_ucast_vlan;
-
- u64 rx_mcast;
- u64 rx_mcast_octets;
- u64 rx_mcast_vlan;
-
- u64 rx_bcast;
- u64 rx_bcast_octets;
- u64 rx_bcast_vlan;
-
- u64 rx_drops;
-};
-
-/*
- * BPC Tx Registers
- */
-struct cna_stats_bpc_tx {
- u64 tx_pause[8];
- u64 tx_zero_pause[8]; /* Pause cancellation */
- u64 tx_first_pause[8]; /* Pause initiation rather
- *than retention */
-};
-
-/*
- * BPC Rx Registers
- */
-struct cna_stats_bpc_rx {
- u64 rx_pause[8];
- u64 rx_zero_pause[8]; /* Pause cancellation */
- u64 rx_first_pause[8]; /* Pause initiation rather
- *than retention */
-};
-
-/*
- * MAC Rx Statistics
- */
-struct cna_stats_mac_rx {
- u64 frame_64; /* both rx and tx counter */
- u64 frame_65_127; /* both rx and tx counter */
- u64 frame_128_255; /* both rx and tx counter */
- u64 frame_256_511; /* both rx and tx counter */
- u64 frame_512_1023; /* both rx and tx counter */
- u64 frame_1024_1518; /* both rx and tx counter */
- u64 frame_1518_1522; /* both rx and tx counter */
- u64 rx_bytes;
- u64 rx_packets;
- u64 rx_fcs_error;
- u64 rx_multicast;
- u64 rx_broadcast;
- u64 rx_control_frames;
- u64 rx_pause;
- u64 rx_unknown_opcode;
- u64 rx_alignment_error;
- u64 rx_frame_length_error;
- u64 rx_code_error;
- u64 rx_carrier_sense_error;
- u64 rx_undersize;
- u64 rx_oversize;
- u64 rx_fragments;
- u64 rx_jabber;
- u64 rx_drop;
-};
-
-/*
- * MAC Tx Statistics
- */
-struct cna_stats_mac_tx {
- u64 tx_bytes;
- u64 tx_packets;
- u64 tx_multicast;
- u64 tx_broadcast;
- u64 tx_pause;
- u64 tx_deferral;
- u64 tx_excessive_deferral;
- u64 tx_single_collision;
- u64 tx_muliple_collision;
- u64 tx_late_collision;
- u64 tx_excessive_collision;
- u64 tx_total_collision;
- u64 tx_pause_honored;
- u64 tx_drop;
- u64 tx_jabber;
- u64 tx_fcs_error;
- u64 tx_control_frame;
- u64 tx_oversize;
- u64 tx_undersize;
- u64 tx_fragments;
-};
-
-/*
- * Complete statistics
- */
-struct bna_stats {
- struct cna_stats_mac_rx mac_rx_stats;
- struct cna_stats_bpc_rx bpc_rx_stats;
- struct cna_stats_rad rad_stats;
- struct bna_stats_fc_rx fc_rx_stats;
- struct cna_stats_mac_tx mac_tx_stats;
- struct cna_stats_bpc_tx bpc_tx_stats;
- struct bna_stats_fc_tx fc_tx_stats;
- struct bna_stats_rxf rxf_stats[BNA_TXF_ID_MAX];
- struct bna_stats_txf txf_stats[BNA_RXF_ID_MAX];
-};
-
-#endif
diff --git a/drivers/scsi/bfa/include/cs/bfa_checksum.h b/drivers/scsi/bfa/include/cs/bfa_checksum.h
deleted file mode 100644
index 650f8d0..0000000
--- a/drivers/scsi/bfa/include/cs/bfa_checksum.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/**
- * bfa_checksum.h BFA checksum utilities
- */
-
-#ifndef __BFA_CHECKSUM_H__
-#define __BFA_CHECKSUM_H__
-
-static inline u32
-bfa_checksum_u32(u32 *buf, int sz)
-{
- int i, m = sz >> 2;
- u32 sum = 0;
-
- for (i = 0; i < m; i++)
- sum ^= buf[i];
-
- return sum;
-}
-
-static inline u16
-bfa_checksum_u16(u16 *buf, int sz)
-{
- int i, m = sz >> 1;
- u16 sum = 0;
-
- for (i = 0; i < m; i++)
- sum ^= buf[i];
-
- return sum;
-}
-
-static inline u8
-bfa_checksum_u8(u8 *buf, int sz)
-{
- int i;
- u8 sum = 0;
-
- for (i = 0; i < sz; i++)
- sum ^= buf[i];
-
- return sum;
-}
-#endif
diff --git a/drivers/scsi/bfa/include/cs/bfa_debug.h b/drivers/scsi/bfa/include/cs/bfa_debug.h
deleted file mode 100644
index 75a911e..0000000
--- a/drivers/scsi/bfa/include/cs/bfa_debug.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/**
- * bfa_debug.h BFA debug interfaces
- */
-
-#ifndef __BFA_DEBUG_H__
-#define __BFA_DEBUG_H__
-
-#define bfa_assert(__cond) do { \
- if (!(__cond)) \
- bfa_panic(__LINE__, __FILE__, #__cond); \
-} while (0)
-
-#define bfa_sm_fault(__mod, __event) do { \
- bfa_trc(__mod, (((uint32_t)0xDEAD << 16) | __event)); \
- bfa_sm_panic((__mod)->logm, __LINE__, __FILE__, __event); \
-} while (0)
-
-#ifndef BFA_PERF_BUILD
-#define bfa_assert_fp(__cond) bfa_assert(__cond)
-#else
-#define bfa_assert_fp(__cond)
-#endif
-
-struct bfa_log_mod_s;
-void bfa_panic(int line, char *file, char *panicstr);
-void bfa_sm_panic(struct bfa_log_mod_s *logm, int line, char *file, int event);
-
-#endif /* __BFA_DEBUG_H__ */
diff --git a/drivers/scsi/bfa/include/cs/bfa_log.h b/drivers/scsi/bfa/include/cs/bfa_log.h
deleted file mode 100644
index bc334e0..0000000
--- a/drivers/scsi/bfa/include/cs/bfa_log.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/**
- * bfa_log.h BFA log library data structure and function definition
- */
-
-#ifndef __BFA_LOG_H__
-#define __BFA_LOG_H__
-
-#include <bfa_os_inc.h>
-#include <defs/bfa_defs_status.h>
-#include <defs/bfa_defs_aen.h>
-
-/*
- * BFA log module definition
- *
- * To create a new module id:
- * Add a #define at the end of the list below. Select a value for your
- * definition so that it is one (1) greater than the previous
- * definition. Modify the definition of BFA_LOG_MODULE_ID_MAX to become
- * your new definition.
- * Should have no gaps in between the values because this is used in arrays.
- * IMPORTANT: AEN_IDs must be at the begining, otherwise update bfa_defs_aen.h
- */
-
-enum bfa_log_module_id {
- BFA_LOG_UNUSED_ID = 0,
-
- /* AEN defs begin */
- BFA_LOG_AEN_MIN = BFA_LOG_UNUSED_ID,
-
- BFA_LOG_AEN_ID_ADAPTER = BFA_LOG_AEN_MIN + BFA_AEN_CAT_ADAPTER,/* 1 */
- BFA_LOG_AEN_ID_PORT = BFA_LOG_AEN_MIN + BFA_AEN_CAT_PORT, /* 2 */
- BFA_LOG_AEN_ID_LPORT = BFA_LOG_AEN_MIN + BFA_AEN_CAT_LPORT, /* 3 */
- BFA_LOG_AEN_ID_RPORT = BFA_LOG_AEN_MIN + BFA_AEN_CAT_RPORT, /* 4 */
- BFA_LOG_AEN_ID_ITNIM = BFA_LOG_AEN_MIN + BFA_AEN_CAT_ITNIM, /* 5 */
- BFA_LOG_AEN_ID_TIN = BFA_LOG_AEN_MIN + BFA_AEN_CAT_TIN, /* 6 */
- BFA_LOG_AEN_ID_IPFC = BFA_LOG_AEN_MIN + BFA_AEN_CAT_IPFC, /* 7 */
- BFA_LOG_AEN_ID_AUDIT = BFA_LOG_AEN_MIN + BFA_AEN_CAT_AUDIT, /* 8 */
- BFA_LOG_AEN_ID_IOC = BFA_LOG_AEN_MIN + BFA_AEN_CAT_IOC, /* 9 */
- BFA_LOG_AEN_ID_ETHPORT = BFA_LOG_AEN_MIN + BFA_AEN_CAT_ETHPORT,/* 10 */
-
- BFA_LOG_AEN_MAX = BFA_LOG_AEN_ID_ETHPORT,
- /* AEN defs end */
-
- BFA_LOG_MODULE_ID_MIN = BFA_LOG_AEN_MAX,
-
- BFA_LOG_FW_ID = BFA_LOG_MODULE_ID_MIN + 1,
- BFA_LOG_HAL_ID = BFA_LOG_MODULE_ID_MIN + 2,
- BFA_LOG_FCS_ID = BFA_LOG_MODULE_ID_MIN + 3,
- BFA_LOG_WDRV_ID = BFA_LOG_MODULE_ID_MIN + 4,
- BFA_LOG_LINUX_ID = BFA_LOG_MODULE_ID_MIN + 5,
- BFA_LOG_SOLARIS_ID = BFA_LOG_MODULE_ID_MIN + 6,
-
- BFA_LOG_MODULE_ID_MAX = BFA_LOG_SOLARIS_ID,
-
- /* Not part of any arrays */
- BFA_LOG_MODULE_ID_ALL = BFA_LOG_MODULE_ID_MAX + 1,
- BFA_LOG_AEN_ALL = BFA_LOG_MODULE_ID_MAX + 2,
- BFA_LOG_DRV_ALL = BFA_LOG_MODULE_ID_MAX + 3,
-};
-
-/*
- * BFA log catalog name
- */
-#define BFA_LOG_CAT_NAME "BFA"
-
-/*
- * bfa log severity values
- */
-enum bfa_log_severity {
- BFA_LOG_INVALID = 0,
- BFA_LOG_CRITICAL = 1,
- BFA_LOG_ERROR = 2,
- BFA_LOG_WARNING = 3,
- BFA_LOG_INFO = 4,
- BFA_LOG_NONE = 5,
- BFA_LOG_LEVEL_MAX = BFA_LOG_NONE
-};
-
-#define BFA_LOG_MODID_OFFSET 16
-
-
-struct bfa_log_msgdef_s {
- u32 msg_id; /* message id */
- int attributes; /* attributes */
- int severity; /* severity level */
- char *msg_value;
- /* msg string */
- char *message;
- /* msg format string */
- int arg_type; /* argument type */
- int arg_num; /* number of argument */
-};
-
-/*
- * supported argument type
- */
-enum bfa_log_arg_type {
- BFA_LOG_S = 0, /* string */
- BFA_LOG_D, /* decimal */
- BFA_LOG_I, /* integer */
- BFA_LOG_O, /* oct number */
- BFA_LOG_U, /* unsigned integer */
- BFA_LOG_X, /* hex number */
- BFA_LOG_F, /* floating */
- BFA_LOG_C, /* character */
- BFA_LOG_L, /* double */
- BFA_LOG_P /* pointer */
-};
-
-#define BFA_LOG_ARG_TYPE 2
-#define BFA_LOG_ARG0 (0 * BFA_LOG_ARG_TYPE)
-#define BFA_LOG_ARG1 (1 * BFA_LOG_ARG_TYPE)
-#define BFA_LOG_ARG2 (2 * BFA_LOG_ARG_TYPE)
-#define BFA_LOG_ARG3 (3 * BFA_LOG_ARG_TYPE)
-
-#define BFA_LOG_GET_MOD_ID(msgid) ((msgid >> BFA_LOG_MODID_OFFSET) & 0xff)
-#define BFA_LOG_GET_MSG_IDX(msgid) (msgid & 0xffff)
-#define BFA_LOG_GET_MSG_ID(msgdef) ((msgdef)->msg_id)
-#define BFA_LOG_GET_MSG_FMT_STRING(msgdef) ((msgdef)->message)
-#define BFA_LOG_GET_SEVERITY(msgdef) ((msgdef)->severity)
-
-/*
- * Event attributes
- */
-#define BFA_LOG_ATTR_NONE 0
-#define BFA_LOG_ATTR_AUDIT 1
-#define BFA_LOG_ATTR_LOG 2
-#define BFA_LOG_ATTR_FFDC 4
-
-#define BFA_LOG_CREATE_ID(msw, lsw) \
- (((u32)msw << BFA_LOG_MODID_OFFSET) | lsw)
-
-struct bfa_log_mod_s;
-
-/**
- * callback function
- */
-typedef void (*bfa_log_cb_t)(struct bfa_log_mod_s *log_mod, u32 msg_id,
- const char *format, ...);
-
-
-struct bfa_log_mod_s {
- char instance_info[BFA_STRING_32]; /* instance info */
- int log_level[BFA_LOG_MODULE_ID_MAX + 1];
- /* log level for modules */
- bfa_log_cb_t cbfn; /* callback function */
-};
-
-extern int bfa_log_init(struct bfa_log_mod_s *log_mod,
- char *instance_name, bfa_log_cb_t cbfn);
-extern int bfa_log(struct bfa_log_mod_s *log_mod, u32 msg_id, ...);
-extern bfa_status_t bfa_log_set_level(struct bfa_log_mod_s *log_mod,
- int mod_id, enum bfa_log_severity log_level);
-extern bfa_status_t bfa_log_set_level_all(struct bfa_log_mod_s *log_mod,
- enum bfa_log_severity log_level);
-extern bfa_status_t bfa_log_set_level_aen(struct bfa_log_mod_s *log_mod,
- enum bfa_log_severity log_level);
-extern enum bfa_log_severity bfa_log_get_level(struct bfa_log_mod_s *log_mod,
- int mod_id);
-extern enum bfa_log_severity bfa_log_get_msg_level(
- struct bfa_log_mod_s *log_mod, u32 msg_id);
-/*
- * array of messages generated from xml files
- */
-extern struct bfa_log_msgdef_s bfa_log_msg_array[];
-
-#endif
diff --git a/drivers/scsi/bfa/include/cs/bfa_perf.h b/drivers/scsi/bfa/include/cs/bfa_perf.h
deleted file mode 100644
index 45aa5f9..0000000
--- a/drivers/scsi/bfa/include/cs/bfa_perf.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-#ifndef __BFAD_PERF_H__
-#define __BFAD_PERF_H__
-
-#ifdef BFAD_PERF_BUILD
-
-#undef bfa_trc
-#undef bfa_trc32
-#undef bfa_assert
-#undef BFA_TRC_FILE
-
-#define bfa_trc(_trcp, _data)
-#define bfa_trc32(_trcp, _data)
-#define bfa_assert(__cond)
-#define BFA_TRC_FILE(__mod, __submod)
-
-#endif
-
-#endif /* __BFAD_PERF_H__ */
diff --git a/drivers/scsi/bfa/include/cs/bfa_plog.h b/drivers/scsi/bfa/include/cs/bfa_plog.h
deleted file mode 100644
index f5bef63..0000000
--- a/drivers/scsi/bfa/include/cs/bfa_plog.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-#ifndef __BFA_PORTLOG_H__
-#define __BFA_PORTLOG_H__
-
-#include "protocol/fc.h"
-#include <defs/bfa_defs_types.h>
-
-#define BFA_PL_NLOG_ENTS 256
-#define BFA_PL_LOG_REC_INCR(_x) ((_x)++, (_x) %= BFA_PL_NLOG_ENTS)
-
-#define BFA_PL_STRING_LOG_SZ 32 /* number of chars in string log */
-#define BFA_PL_INT_LOG_SZ 8 /* number of integers in the integer log */
-
-enum bfa_plog_log_type {
- BFA_PL_LOG_TYPE_INVALID = 0,
- BFA_PL_LOG_TYPE_INT = 1,
- BFA_PL_LOG_TYPE_STRING = 2,
-};
-
-/*
- * the (fixed size) record format for each entry in the portlog
- */
-struct bfa_plog_rec_s {
- u32 tv; /* Filled by the portlog driver when the *
- * entry is added to the circular log. */
- u8 port; /* Source port that logged this entry. CM
- * entities will use 0xFF */
- u8 mid; /* Integer value to be used by all entities *
- * while logging. The module id to string *
- * conversion will be done by BFAL. See
- * enum bfa_plog_mid */
- u8 eid; /* indicates Rx, Tx, IOCTL, etc. See
- * enum bfa_plog_eid */
- u8 log_type; /* indicates string log or integer log.
- * see bfa_plog_log_type_t */
- u8 log_num_ints;
- /*
- * interpreted only if log_type is INT_LOG. indicates number of
- * integers in the int_log[] (0-PL_INT_LOG_SZ).
- */
- u8 rsvd;
- u16 misc; /* can be used to indicate fc frame length,
- *etc.. */
- union {
- char string_log[BFA_PL_STRING_LOG_SZ];
- u32 int_log[BFA_PL_INT_LOG_SZ];
- } log_entry;
-
-};
-
-/*
- * the following #defines will be used by the logging entities to indicate
- * their module id. BFAL will convert the integer value to string format
- *
-* process to be used while changing the following #defines:
- * - Always add new entries at the end
- * - define corresponding string in BFAL
- * - Do not remove any entry or rearrange the order.
- */
-enum bfa_plog_mid {
- BFA_PL_MID_INVALID = 0,
- BFA_PL_MID_DEBUG = 1,
- BFA_PL_MID_DRVR = 2,
- BFA_PL_MID_HAL = 3,
- BFA_PL_MID_HAL_FCXP = 4,
- BFA_PL_MID_HAL_UF = 5,
- BFA_PL_MID_FCS = 6,
- BFA_PL_MID_LPS = 7,
- BFA_PL_MID_MAX = 8
-};
-
-#define BFA_PL_MID_STRLEN 8
-struct bfa_plog_mid_strings_s {
- char m_str[BFA_PL_MID_STRLEN];
-};
-
-/*
- * the following #defines will be used by the logging entities to indicate
- * their event type. BFAL will convert the integer value to string format
- *
-* process to be used while changing the following #defines:
- * - Always add new entries at the end
- * - define corresponding string in BFAL
- * - Do not remove any entry or rearrange the order.
- */
-enum bfa_plog_eid {
- BFA_PL_EID_INVALID = 0,
- BFA_PL_EID_IOC_DISABLE = 1,
- BFA_PL_EID_IOC_ENABLE = 2,
- BFA_PL_EID_PORT_DISABLE = 3,
- BFA_PL_EID_PORT_ENABLE = 4,
- BFA_PL_EID_PORT_ST_CHANGE = 5,
- BFA_PL_EID_TX = 6,
- BFA_PL_EID_TX_ACK1 = 7,
- BFA_PL_EID_TX_RJT = 8,
- BFA_PL_EID_TX_BSY = 9,
- BFA_PL_EID_RX = 10,
- BFA_PL_EID_RX_ACK1 = 11,
- BFA_PL_EID_RX_RJT = 12,
- BFA_PL_EID_RX_BSY = 13,
- BFA_PL_EID_CT_IN = 14,
- BFA_PL_EID_CT_OUT = 15,
- BFA_PL_EID_DRIVER_START = 16,
- BFA_PL_EID_RSCN = 17,
- BFA_PL_EID_DEBUG = 18,
- BFA_PL_EID_MISC = 19,
- BFA_PL_EID_FIP_FCF_DISC = 20,
- BFA_PL_EID_FIP_FCF_CVL = 21,
- BFA_PL_EID_LOGIN = 22,
- BFA_PL_EID_LOGO = 23,
- BFA_PL_EID_MAX = 24
-};
-
-#define BFA_PL_ENAME_STRLEN 8
-struct bfa_plog_eid_strings_s {
- char e_str[BFA_PL_ENAME_STRLEN];
-};
-
-#define BFA_PL_SIG_LEN 8
-#define BFA_PL_SIG_STR "12pl123"
-
-/*
- * per port circular log buffer
- */
-struct bfa_plog_s {
- char plog_sig[BFA_PL_SIG_LEN]; /* Start signature */
- u8 plog_enabled;
- u8 rsvd[7];
- u32 ticks;
- u16 head;
- u16 tail;
- struct bfa_plog_rec_s plog_recs[BFA_PL_NLOG_ENTS];
-};
-
-void bfa_plog_init(struct bfa_plog_s *plog);
-void bfa_plog_str(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
- enum bfa_plog_eid event, u16 misc, char *log_str);
-void bfa_plog_intarr(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
- enum bfa_plog_eid event, u16 misc,
- u32 *intarr, u32 num_ints);
-void bfa_plog_fchdr(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
- enum bfa_plog_eid event, u16 misc,
- struct fchs_s *fchdr);
-void bfa_plog_fchdr_and_pl(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
- enum bfa_plog_eid event, u16 misc,
- struct fchs_s *fchdr, u32 pld_w0);
-void bfa_plog_clear(struct bfa_plog_s *plog);
-void bfa_plog_enable(struct bfa_plog_s *plog);
-void bfa_plog_disable(struct bfa_plog_s *plog);
-bfa_boolean_t bfa_plog_get_setting(struct bfa_plog_s *plog);
-
-#endif /* __BFA_PORTLOG_H__ */
diff --git a/drivers/scsi/bfa/include/cs/bfa_q.h b/drivers/scsi/bfa/include/cs/bfa_q.h
deleted file mode 100644
index ea895fa..0000000
--- a/drivers/scsi/bfa/include/cs/bfa_q.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/**
- * bfa_q.h Circular queue definitions.
- */
-
-#ifndef __BFA_Q_H__
-#define __BFA_Q_H__
-
-#define bfa_q_first(_q) ((void *)(((struct list_head *) (_q))->next))
-#define bfa_q_next(_qe) (((struct list_head *) (_qe))->next)
-#define bfa_q_prev(_qe) (((struct list_head *) (_qe))->prev)
-
-/*
- * bfa_q_qe_init - to initialize a queue element
- */
-#define bfa_q_qe_init(_qe) { \
- bfa_q_next(_qe) = (struct list_head *) NULL; \
- bfa_q_prev(_qe) = (struct list_head *) NULL; \
-}
-
-/*
- * bfa_q_deq - dequeue an element from head of the queue
- */
-#define bfa_q_deq(_q, _qe) { \
- if (!list_empty(_q)) { \
- (*((struct list_head **) (_qe))) = bfa_q_next(_q); \
- bfa_q_prev(bfa_q_next(*((struct list_head **) _qe))) = \
- (struct list_head *) (_q); \
- bfa_q_next(_q) = bfa_q_next(*((struct list_head **) _qe)); \
- BFA_Q_DBG_INIT(*((struct list_head **) _qe)); \
- } else { \
- *((struct list_head **) (_qe)) = (struct list_head *) NULL; \
- } \
-}
-
-/*
- * bfa_q_deq_tail - dequeue an element from tail of the queue
- */
-#define bfa_q_deq_tail(_q, _qe) { \
- if (!list_empty(_q)) { \
- *((struct list_head **) (_qe)) = bfa_q_prev(_q); \
- bfa_q_next(bfa_q_prev(*((struct list_head **) _qe))) = \
- (struct list_head *) (_q); \
- bfa_q_prev(_q) = bfa_q_prev(*(struct list_head **) _qe); \
- BFA_Q_DBG_INIT(*((struct list_head **) _qe)); \
- } else { \
- *((struct list_head **) (_qe)) = (struct list_head *) NULL; \
- } \
-}
-
-/*
- * #ifdef BFA_DEBUG (Using bfa_assert to check for debug_build is not
- * consistent across modules)
- */
-#ifndef BFA_PERF_BUILD
-#define BFA_Q_DBG_INIT(_qe) bfa_q_qe_init(_qe)
-#else
-#define BFA_Q_DBG_INIT(_qe)
-#endif
-
-#define bfa_q_is_on_q(_q, _qe) \
- bfa_q_is_on_q_func(_q, (struct list_head *)(_qe))
-extern int bfa_q_is_on_q_func(struct list_head *q, struct list_head *qe);
-
-#endif
diff --git a/drivers/scsi/bfa/include/cs/bfa_sm.h b/drivers/scsi/bfa/include/cs/bfa_sm.h
deleted file mode 100644
index 11fba90..0000000
--- a/drivers/scsi/bfa/include/cs/bfa_sm.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/**
- * bfasm.h State machine defines
- */
-
-#ifndef __BFA_SM_H__
-#define __BFA_SM_H__
-
-typedef void (*bfa_sm_t)(void *sm, int event);
-/**
- * oc - object class eg. bfa_ioc
- * st - state, eg. reset
- * otype - object type, eg. struct bfa_ioc_s
- * etype - object type, eg. enum ioc_event
- */
-#define bfa_sm_state_decl(oc, st, otype, etype) \
- static void oc ## _sm_ ## st(otype * fsm, etype event)
-
-#define bfa_sm_set_state(_sm, _state) ((_sm)->sm = (bfa_sm_t)(_state))
-#define bfa_sm_send_event(_sm, _event) ((_sm)->sm((_sm), (_event)))
-#define bfa_sm_get_state(_sm) ((_sm)->sm)
-#define bfa_sm_cmp_state(_sm, _state) ((_sm)->sm == (bfa_sm_t)(_state))
-
-/**
- * For converting from state machine function to state encoding.
- */
-struct bfa_sm_table_s {
- bfa_sm_t sm; /* state machine function */
- int state; /* state machine encoding */
- char *name; /* state name for display */
-};
-#define BFA_SM(_sm) ((bfa_sm_t)(_sm))
-
-int bfa_sm_to_state(struct bfa_sm_table_s *smt, bfa_sm_t sm);
-
-/**
- * State machine with entry actions.
- */
-typedef void (*bfa_fsm_t)(void *fsm, int event);
-
-/**
- * oc - object class eg. bfa_ioc
- * st - state, eg. reset
- * otype - object type, eg. struct bfa_ioc_s
- * etype - object type, eg. enum ioc_event
- */
-#define bfa_fsm_state_decl(oc, st, otype, etype) \
- static void oc ## _sm_ ## st(otype * fsm, etype event); \
- static void oc ## _sm_ ## st ## _entry(otype * fsm)
-
-#define bfa_fsm_set_state(_fsm, _state) do { \
- (_fsm)->fsm = (bfa_fsm_t)(_state); \
- _state ## _entry(_fsm); \
-} while (0)
-
-#define bfa_fsm_send_event(_fsm, _event) \
- ((_fsm)->fsm((_fsm), (_event)))
-#define bfa_fsm_cmp_state(_fsm, _state) \
- ((_fsm)->fsm == (bfa_fsm_t)(_state))
-
-#endif
diff --git a/drivers/scsi/bfa/include/cs/bfa_trc.h b/drivers/scsi/bfa/include/cs/bfa_trc.h
deleted file mode 100644
index 310771c..0000000
--- a/drivers/scsi/bfa/include/cs/bfa_trc.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-#ifndef __BFA_TRC_H__
-#define __BFA_TRC_H__
-
-#include <bfa_os_inc.h>
-
-#ifndef BFA_TRC_MAX
-#define BFA_TRC_MAX (4 * 1024)
-#endif
-
-#ifndef BFA_TRC_TS
-#define BFA_TRC_TS(_trcm) ((_trcm)->ticks++)
-#endif
-
-struct bfa_trc_s {
-#ifdef __BIGENDIAN
- u16 fileno;
- u16 line;
-#else
- u16 line;
- u16 fileno;
-#endif
- u32 timestamp;
- union {
- struct {
- u32 rsvd;
- u32 u32;
- } u32;
- u64 u64;
- } data;
-};
-
-
-struct bfa_trc_mod_s {
- u32 head;
- u32 tail;
- u32 ntrc;
- u32 stopped;
- u32 ticks;
- u32 rsvd[3];
- struct bfa_trc_s trc[BFA_TRC_MAX];
-};
-
-
-enum {
- BFA_TRC_FW = 1, /* firmware modules */
- BFA_TRC_HAL = 2, /* BFA modules */
- BFA_TRC_FCS = 3, /* BFA FCS modules */
- BFA_TRC_LDRV = 4, /* Linux driver modules */
- BFA_TRC_SDRV = 5, /* Solaris driver modules */
- BFA_TRC_VDRV = 6, /* vmware driver modules */
- BFA_TRC_WDRV = 7, /* windows driver modules */
- BFA_TRC_AEN = 8, /* AEN module */
- BFA_TRC_BIOS = 9, /* bios driver modules */
- BFA_TRC_EFI = 10, /* EFI driver modules */
- BNA_TRC_WDRV = 11, /* BNA windows driver modules */
- BNA_TRC_VDRV = 12, /* BNA vmware driver modules */
- BNA_TRC_SDRV = 13, /* BNA Solaris driver modules */
- BNA_TRC_LDRV = 14, /* BNA Linux driver modules */
- BNA_TRC_HAL = 15, /* BNA modules */
- BFA_TRC_CNA = 16, /* Common modules */
- BNA_TRC_IMDRV = 17 /* BNA windows intermediate driver modules */
-};
-#define BFA_TRC_MOD_SH 10
-#define BFA_TRC_MOD(__mod) ((BFA_TRC_ ## __mod) << BFA_TRC_MOD_SH)
-
-/**
- * Define a new tracing file (module). Module should match one defined above.
- */
-#define BFA_TRC_FILE(__mod, __submod) \
- static int __trc_fileno = ((BFA_TRC_ ## __mod ## _ ## __submod) | \
- BFA_TRC_MOD(__mod))
-
-
-#define bfa_trc32(_trcp, _data) \
- __bfa_trc((_trcp)->trcmod, __trc_fileno, __LINE__, (u32)_data)
-
-
-#ifndef BFA_BOOT_BUILD
-#define bfa_trc(_trcp, _data) \
- __bfa_trc((_trcp)->trcmod, __trc_fileno, __LINE__, (u64)_data)
-#else
-void bfa_boot_trc(struct bfa_trc_mod_s *trcmod, u16 fileno,
- u16 line, u32 data);
-#define bfa_trc(_trcp, _data) \
- bfa_boot_trc((_trcp)->trcmod, __trc_fileno, __LINE__, (u32)_data)
-#endif
-
-
-static inline void
-bfa_trc_init(struct bfa_trc_mod_s *trcm)
-{
- trcm->head = trcm->tail = trcm->stopped = 0;
- trcm->ntrc = BFA_TRC_MAX;
-}
-
-
-static inline void
-bfa_trc_stop(struct bfa_trc_mod_s *trcm)
-{
- trcm->stopped = 1;
-}
-
-#ifdef FWTRC
-extern void dc_flush(void *data);
-#else
-#define dc_flush(data)
-#endif
-
-
-static inline void
-__bfa_trc(struct bfa_trc_mod_s *trcm, int fileno, int line, u64 data)
-{
- int tail = trcm->tail;
- struct bfa_trc_s *trc = &trcm->trc[tail];
-
- if (trcm->stopped)
- return;
-
- trc->fileno = (u16) fileno;
- trc->line = (u16) line;
- trc->data.u64 = data;
- trc->timestamp = BFA_TRC_TS(trcm);
- dc_flush(trc);
-
- trcm->tail = (trcm->tail + 1) & (BFA_TRC_MAX - 1);
- if (trcm->tail == trcm->head)
- trcm->head = (trcm->head + 1) & (BFA_TRC_MAX - 1);
- dc_flush(trcm);
-}
-
-
-static inline void
-__bfa_trc32(struct bfa_trc_mod_s *trcm, int fileno, int line, u32 data)
-{
- int tail = trcm->tail;
- struct bfa_trc_s *trc = &trcm->trc[tail];
-
- if (trcm->stopped)
- return;
-
- trc->fileno = (u16) fileno;
- trc->line = (u16) line;
- trc->data.u32.u32 = data;
- trc->timestamp = BFA_TRC_TS(trcm);
- dc_flush(trc);
-
- trcm->tail = (trcm->tail + 1) & (BFA_TRC_MAX - 1);
- if (trcm->tail == trcm->head)
- trcm->head = (trcm->head + 1) & (BFA_TRC_MAX - 1);
- dc_flush(trcm);
-}
-
-#ifndef BFA_PERF_BUILD
-#define bfa_trc_fp(_trcp, _data) bfa_trc(_trcp, _data)
-#else
-#define bfa_trc_fp(_trcp, _data)
-#endif
-
-#endif /* __BFA_TRC_H__ */
-
diff --git a/drivers/scsi/bfa/include/cs/bfa_wc.h b/drivers/scsi/bfa/include/cs/bfa_wc.h
deleted file mode 100644
index 0460bd4..0000000
--- a/drivers/scsi/bfa/include/cs/bfa_wc.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/**
- * bfa_wc.h Generic wait counter.
- */
-
-#ifndef __BFA_WC_H__
-#define __BFA_WC_H__
-
-typedef void (*bfa_wc_resume_t) (void *cbarg);
-
-struct bfa_wc_s {
- bfa_wc_resume_t wc_resume;
- void *wc_cbarg;
- int wc_count;
-};
-
-static inline void
-bfa_wc_up(struct bfa_wc_s *wc)
-{
- wc->wc_count++;
-}
-
-static inline void
-bfa_wc_down(struct bfa_wc_s *wc)
-{
- wc->wc_count--;
- if (wc->wc_count == 0)
- wc->wc_resume(wc->wc_cbarg);
-}
-
-/**
- * Initialize a waiting counter.
- */
-static inline void
-bfa_wc_init(struct bfa_wc_s *wc, bfa_wc_resume_t wc_resume, void *wc_cbarg)
-{
- wc->wc_resume = wc_resume;
- wc->wc_cbarg = wc_cbarg;
- wc->wc_count = 0;
- bfa_wc_up(wc);
-}
-
-/**
- * Wait for counter to reach zero
- */
-static inline void
-bfa_wc_wait(struct bfa_wc_s *wc)
-{
- bfa_wc_down(wc);
-}
-
-#endif
diff --git a/drivers/scsi/bfa/include/log/bfa_log_fcs.h b/drivers/scsi/bfa/include/log/bfa_log_fcs.h
deleted file mode 100644
index b6f5df8..0000000
--- a/drivers/scsi/bfa/include/log/bfa_log_fcs.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/*
- * messages define for FCS Module
- */
-#ifndef __BFA_LOG_FCS_H__
-#define __BFA_LOG_FCS_H__
-#include <cs/bfa_log.h>
-#define BFA_LOG_FCS_FABRIC_NOSWITCH \
- (((u32) BFA_LOG_FCS_ID << BFA_LOG_MODID_OFFSET) | 1)
-#define BFA_LOG_FCS_FABRIC_ISOLATED \
- (((u32) BFA_LOG_FCS_ID << BFA_LOG_MODID_OFFSET) | 2)
-#endif
diff --git a/drivers/scsi/bfa/include/log/bfa_log_hal.h b/drivers/scsi/bfa/include/log/bfa_log_hal.h
deleted file mode 100644
index 5f8f5e3..0000000
--- a/drivers/scsi/bfa/include/log/bfa_log_hal.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/* messages define for HAL Module */
-#ifndef __BFA_LOG_HAL_H__
-#define __BFA_LOG_HAL_H__
-#include <cs/bfa_log.h>
-#define BFA_LOG_HAL_ASSERT \
- (((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 1)
-#define BFA_LOG_HAL_HEARTBEAT_FAILURE \
- (((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 2)
-#define BFA_LOG_HAL_FCPIM_PARM_INVALID \
- (((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 3)
-#define BFA_LOG_HAL_SM_ASSERT \
- (((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 4)
-#define BFA_LOG_HAL_DRIVER_ERROR \
- (((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 5)
-#define BFA_LOG_HAL_DRIVER_CONFIG_ERROR \
- (((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 6)
-#define BFA_LOG_HAL_MBOX_ERROR \
- (((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 7)
-#endif
diff --git a/drivers/scsi/bfa/include/log/bfa_log_linux.h b/drivers/scsi/bfa/include/log/bfa_log_linux.h
deleted file mode 100644
index 44bc897..0000000
--- a/drivers/scsi/bfa/include/log/bfa_log_linux.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/* messages define for LINUX Module */
-#ifndef __BFA_LOG_LINUX_H__
-#define __BFA_LOG_LINUX_H__
-#include <cs/bfa_log.h>
-#define BFA_LOG_LINUX_DEVICE_CLAIMED \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 1)
-#define BFA_LOG_LINUX_HASH_INIT_FAILED \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 2)
-#define BFA_LOG_LINUX_SYSFS_FAILED \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 3)
-#define BFA_LOG_LINUX_MEM_ALLOC_FAILED \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 4)
-#define BFA_LOG_LINUX_DRIVER_REGISTRATION_FAILED \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 5)
-#define BFA_LOG_LINUX_ITNIM_FREE \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 6)
-#define BFA_LOG_LINUX_ITNIM_ONLINE \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 7)
-#define BFA_LOG_LINUX_ITNIM_OFFLINE \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 8)
-#define BFA_LOG_LINUX_SCSI_HOST_FREE \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 9)
-#define BFA_LOG_LINUX_SCSI_ABORT \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 10)
-#define BFA_LOG_LINUX_SCSI_ABORT_COMP \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 11)
-#define BFA_LOG_LINUX_DRIVER_CONFIG_ERROR \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 12)
-#define BFA_LOG_LINUX_BNA_STATE_MACHINE \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 13)
-#define BFA_LOG_LINUX_IOC_ERROR \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 14)
-#define BFA_LOG_LINUX_RESOURCE_ALLOC_ERROR \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 15)
-#define BFA_LOG_LINUX_RING_BUFFER_ERROR \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 16)
-#define BFA_LOG_LINUX_DRIVER_ERROR \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 17)
-#define BFA_LOG_LINUX_DRIVER_INFO \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 18)
-#define BFA_LOG_LINUX_DRIVER_DIAG \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 19)
-#define BFA_LOG_LINUX_DRIVER_AEN \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 20)
-#endif
diff --git a/drivers/scsi/bfa/include/log/bfa_log_wdrv.h b/drivers/scsi/bfa/include/log/bfa_log_wdrv.h
deleted file mode 100644
index 809a95f..0000000
--- a/drivers/scsi/bfa/include/log/bfa_log_wdrv.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/*
- * messages define for WDRV Module
- */
-#ifndef __BFA_LOG_WDRV_H__
-#define __BFA_LOG_WDRV_H__
-#include <cs/bfa_log.h>
-#define BFA_LOG_WDRV_IOC_INIT_ERROR \
- (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 1)
-#define BFA_LOG_WDRV_IOC_INTERNAL_ERROR \
- (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 2)
-#define BFA_LOG_WDRV_IOC_START_ERROR \
- (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 3)
-#define BFA_LOG_WDRV_IOC_STOP_ERROR \
- (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 4)
-#define BFA_LOG_WDRV_INSUFFICIENT_RESOURCES \
- (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 5)
-#define BFA_LOG_WDRV_BASE_ADDRESS_MAP_ERROR \
- (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 6)
-#endif
diff --git a/drivers/scsi/bfa/include/protocol/ct.h b/drivers/scsi/bfa/include/protocol/ct.h
deleted file mode 100644
index b82540a..0000000
--- a/drivers/scsi/bfa/include/protocol/ct.h
+++ /dev/null
@@ -1,492 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __CT_H__
-#define __CT_H__
-
-#include <protocol/types.h>
-
-#pragma pack(1)
-
-struct ct_hdr_s{
- u32 rev_id:8; /* Revision of the CT */
- u32 in_id:24; /* Initiator Id */
- u32 gs_type:8; /* Generic service Type */
- u32 gs_sub_type:8; /* Generic service sub type */
- u32 options:8; /* options */
- u32 rsvrd:8; /* reserved */
- u32 cmd_rsp_code:16;/* ct command/response code */
- u32 max_res_size:16;/* maximum/residual size */
- u32 frag_id:8; /* fragment ID */
- u32 reason_code:8; /* reason code */
- u32 exp_code:8; /* explanation code */
- u32 vendor_unq:8; /* vendor unique */
-};
-
-/*
- * defines for the Revision
- */
-enum {
- CT_GS3_REVISION = 0x01,
-};
-
-/*
- * defines for gs_type
- */
-enum {
- CT_GSTYPE_KEYSERVICE = 0xF7,
- CT_GSTYPE_ALIASSERVICE = 0xF8,
- CT_GSTYPE_MGMTSERVICE = 0xFA,
- CT_GSTYPE_TIMESERVICE = 0xFB,
- CT_GSTYPE_DIRSERVICE = 0xFC,
-};
-
-/*
- * defines for gs_sub_type for gs type directory service
- */
-enum {
- CT_GSSUBTYPE_NAMESERVER = 0x02,
-};
-
-/*
- * defines for gs_sub_type for gs type management service
- */
-enum {
- CT_GSSUBTYPE_CFGSERVER = 0x01,
- CT_GSSUBTYPE_UNZONED_NS = 0x02,
- CT_GSSUBTYPE_ZONESERVER = 0x03,
- CT_GSSUBTYPE_LOCKSERVER = 0x04,
- CT_GSSUBTYPE_HBA_MGMTSERVER = 0x10, /* for FDMI */
-};
-
-/*
- * defines for CT response code field
- */
-enum {
- CT_RSP_REJECT = 0x8001,
- CT_RSP_ACCEPT = 0x8002,
-};
-
-/*
- * definitions for CT reason code
- */
-enum {
- CT_RSN_INV_CMD = 0x01,
- CT_RSN_INV_VER = 0x02,
- CT_RSN_LOGIC_ERR = 0x03,
- CT_RSN_INV_SIZE = 0x04,
- CT_RSN_LOGICAL_BUSY = 0x05,
- CT_RSN_PROTO_ERR = 0x07,
- CT_RSN_UNABLE_TO_PERF = 0x09,
- CT_RSN_NOT_SUPP = 0x0B,
- CT_RSN_SERVER_NOT_AVBL = 0x0D,
- CT_RSN_SESSION_COULD_NOT_BE_ESTBD = 0x0E,
- CT_RSN_VENDOR_SPECIFIC = 0xFF,
-
-};
-
-/*
- * definitions for explanations code for Name server
- */
-enum {
- CT_NS_EXP_NOADDITIONAL = 0x00,
- CT_NS_EXP_ID_NOT_REG = 0x01,
- CT_NS_EXP_PN_NOT_REG = 0x02,
- CT_NS_EXP_NN_NOT_REG = 0x03,
- CT_NS_EXP_CS_NOT_REG = 0x04,
- CT_NS_EXP_IPN_NOT_REG = 0x05,
- CT_NS_EXP_IPA_NOT_REG = 0x06,
- CT_NS_EXP_FT_NOT_REG = 0x07,
- CT_NS_EXP_SPN_NOT_REG = 0x08,
- CT_NS_EXP_SNN_NOT_REG = 0x09,
- CT_NS_EXP_PT_NOT_REG = 0x0A,
- CT_NS_EXP_IPP_NOT_REG = 0x0B,
- CT_NS_EXP_FPN_NOT_REG = 0x0C,
- CT_NS_EXP_HA_NOT_REG = 0x0D,
- CT_NS_EXP_FD_NOT_REG = 0x0E,
- CT_NS_EXP_FF_NOT_REG = 0x0F,
- CT_NS_EXP_ACCESSDENIED = 0x10,
- CT_NS_EXP_UNACCEPTABLE_ID = 0x11,
- CT_NS_EXP_DATABASEEMPTY = 0x12,
- CT_NS_EXP_NOT_REG_IN_SCOPE = 0x13,
- CT_NS_EXP_DOM_ID_NOT_PRESENT = 0x14,
- CT_NS_EXP_PORT_NUM_NOT_PRESENT = 0x15,
- CT_NS_EXP_NO_DEVICE_ATTACHED = 0x16
-};
-
-/*
- * definitions for the explanation code for all servers
- */
-enum {
- CT_EXP_AUTH_EXCEPTION = 0xF1,
- CT_EXP_DB_FULL = 0xF2,
- CT_EXP_DB_EMPTY = 0xF3,
- CT_EXP_PROCESSING_REQ = 0xF4,
- CT_EXP_UNABLE_TO_VERIFY_CONN = 0xF5,
- CT_EXP_DEVICES_NOT_IN_CMN_ZONE = 0xF6
-};
-
-/*
- * Command codes for Name server
- */
-enum {
- GS_GID_PN = 0x0121, /* Get Id on port name */
- GS_GPN_ID = 0x0112, /* Get port name on ID */
- GS_GNN_ID = 0x0113, /* Get node name on ID */
- GS_GID_FT = 0x0171, /* Get Id on FC4 type */
- GS_GSPN_ID = 0x0118, /* Get symbolic PN on ID */
- GS_RFT_ID = 0x0217, /* Register fc4type on ID */
- GS_RSPN_ID = 0x0218, /* Register symbolic PN on ID */
- GS_RPN_ID = 0x0212, /* Register port name */
- GS_RNN_ID = 0x0213, /* Register node name */
- GS_RCS_ID = 0x0214, /* Register class of service */
- GS_RPT_ID = 0x021A, /* Register port type */
- GS_GA_NXT = 0x0100, /* Get all next */
- GS_RFF_ID = 0x021F, /* Register FC4 Feature */
-};
-
-struct fcgs_id_req_s{
- u32 rsvd:8;
- u32 dap:24; /* port identifier */
-};
-#define fcgs_gpnid_req_t struct fcgs_id_req_s
-#define fcgs_gnnid_req_t struct fcgs_id_req_s
-#define fcgs_gspnid_req_t struct fcgs_id_req_s
-
-struct fcgs_gidpn_req_s{
- wwn_t port_name; /* port wwn */
-};
-
-struct fcgs_gidpn_resp_s{
- u32 rsvd:8;
- u32 dap:24; /* port identifier */
-};
-
-/**
- * RFT_ID
- */
-struct fcgs_rftid_req_s {
- u32 rsvd:8;
- u32 dap:24; /* port identifier */
- u32 fc4_type[8]; /* fc4 types */
-};
-
-/**
- * RFF_ID : Register FC4 features.
- */
-
-#define FC_GS_FCP_FC4_FEATURE_INITIATOR 0x02
-#define FC_GS_FCP_FC4_FEATURE_TARGET 0x01
-
-struct fcgs_rffid_req_s{
- u32 rsvd:8;
- u32 dap:24; /* port identifier */
- u32 rsvd1:16;
- u32 fc4ftr_bits:8; /* fc4 feature bits */
- u32 fc4_type:8; /* corresponding FC4 Type */
-};
-
-/**
- * GID_FT Request
- */
-struct fcgs_gidft_req_s{
- u8 reserved;
- u8 domain_id; /* domain, 0 - all fabric */
- u8 area_id; /* area, 0 - whole domain */
- u8 fc4_type; /* FC_TYPE_FCP for SCSI devices */
-}; /* GID_FT Request */
-
-/**
- * GID_FT Response
- */
-struct fcgs_gidft_resp_s {
- u8 last:1; /* last port identifier flag */
- u8 reserved:7;
- u32 pid:24; /* port identifier */
-}; /* GID_FT Response */
-
-/**
- * RSPN_ID
- */
-struct fcgs_rspnid_req_s{
- u32 rsvd:8;
- u32 dap:24; /* port identifier */
- u8 spn_len; /* symbolic port name length */
- u8 spn[256]; /* symbolic port name */
-};
-
-/**
- * RPN_ID
- */
-struct fcgs_rpnid_req_s{
- u32 rsvd:8;
- u32 port_id:24;
- wwn_t port_name;
-};
-
-/**
- * RNN_ID
- */
-struct fcgs_rnnid_req_s{
- u32 rsvd:8;
- u32 port_id:24;
- wwn_t node_name;
-};
-
-/**
- * RCS_ID
- */
-struct fcgs_rcsid_req_s{
- u32 rsvd:8;
- u32 port_id:24;
- u32 cos;
-};
-
-/**
- * RPT_ID
- */
-struct fcgs_rptid_req_s{
- u32 rsvd:8;
- u32 port_id:24;
- u32 port_type:8;
- u32 rsvd1:24;
-};
-
-/**
- * GA_NXT Request
- */
-struct fcgs_ganxt_req_s{
- u32 rsvd:8;
- u32 port_id:24;
-};
-
-/**
- * GA_NXT Response
- */
-struct fcgs_ganxt_rsp_s{
- u32 port_type:8; /* Port Type */
- u32 port_id:24; /* Port Identifier */
- wwn_t port_name; /* Port Name */
- u8 spn_len; /* Length of Symbolic Port Name */
- char spn[255]; /* Symbolic Port Name */
- wwn_t node_name; /* Node Name */
- u8 snn_len; /* Length of Symbolic Node Name */
- char snn[255]; /* Symbolic Node Name */
- u8 ipa[8]; /* Initial Process Associator */
- u8 ip[16]; /* IP Address */
- u32 cos; /* Class of Service */
- u32 fc4types[8]; /* FC-4 TYPEs */
- wwn_t fabric_port_name;
- /* Fabric Port Name */
- u32 rsvd:8; /* Reserved */
- u32 hard_addr:24; /* Hard Address */
-};
-
-/*
- * Fabric Config Server
- */
-
-/*
- * Command codes for Fabric Configuration Server
- */
-enum {
- GS_FC_GFN_CMD = 0x0114, /* GS FC Get Fabric Name */
- GS_FC_GMAL_CMD = 0x0116, /* GS FC GMAL */
- GS_FC_TRACE_CMD = 0x0400, /* GS FC Trace Route */
- GS_FC_PING_CMD = 0x0401, /* GS FC Ping */
-};
-
-/*
- * Source or Destination Port Tags.
- */
-enum {
- GS_FTRACE_TAG_NPORT_ID = 1,
- GS_FTRACE_TAG_NPORT_NAME = 2,
-};
-
-/*
-* Port Value : Could be a Port id or wwn
- */
-union fcgs_port_val_u{
- u32 nport_id;
- wwn_t nport_wwn;
-};
-
-#define GS_FTRACE_MAX_HOP_COUNT 20
-#define GS_FTRACE_REVISION 1
-
-/*
- * Ftrace Related Structures.
- */
-
-/*
- * STR (Switch Trace) Reject Reason Codes. From FC-SW.
- */
-enum {
- GS_FTRACE_STR_CMD_COMPLETED_SUCC = 0,
- GS_FTRACE_STR_CMD_NOT_SUPP_IN_NEXT_SWITCH,
- GS_FTRACE_STR_NO_RESP_FROM_NEXT_SWITCH,
- GS_FTRACE_STR_MAX_HOP_CNT_REACHED,
- GS_FTRACE_STR_SRC_PORT_NOT_FOUND,
- GS_FTRACE_STR_DST_PORT_NOT_FOUND,
- GS_FTRACE_STR_DEVICES_NOT_IN_COMMON_ZONE,
- GS_FTRACE_STR_NO_ROUTE_BW_PORTS,
- GS_FTRACE_STR_NO_ADDL_EXPLN,
- GS_FTRACE_STR_FABRIC_BUSY,
- GS_FTRACE_STR_FABRIC_BUILD_IN_PROGRESS,
- GS_FTRACE_STR_VENDOR_SPECIFIC_ERR_START = 0xf0,
- GS_FTRACE_STR_VENDOR_SPECIFIC_ERR_END = 0xff,
-};
-
-/*
- * Ftrace Request
- */
-struct fcgs_ftrace_req_s{
- u32 revision;
- u16 src_port_tag; /* Source Port tag */
- u16 src_port_len; /* Source Port len */
- union fcgs_port_val_u src_port_val; /* Source Port value */
- u16 dst_port_tag; /* Destination Port tag */
- u16 dst_port_len; /* Destination Port len */
- union fcgs_port_val_u dst_port_val; /* Destination Port value */
- u32 token;
- u8 vendor_id[8]; /* T10 Vendor Identifier */
- u8 vendor_info[8]; /* Vendor specific Info */
- u32 max_hop_cnt; /* Max Hop Count */
-};
-
-/*
- * Path info structure
- */
-struct fcgs_ftrace_path_info_s{
- wwn_t switch_name; /* Switch WWN */
- u32 domain_id;
- wwn_t ingress_port_name; /* Ingress ports wwn */
- u32 ingress_phys_port_num; /* Ingress ports physical port
- * number
- */
- wwn_t egress_port_name; /* Ingress ports wwn */
- u32 egress_phys_port_num; /* Ingress ports physical port
- * number
- */
-};
-
-/*
- * Ftrace Acc Response
- */
-struct fcgs_ftrace_resp_s{
- u32 revision;
- u32 token;
- u8 vendor_id[8]; /* T10 Vendor Identifier */
- u8 vendor_info[8]; /* Vendor specific Info */
- u32 str_rej_reason_code; /* STR Reject Reason Code */
- u32 num_path_info_entries; /* No. of path info entries */
- /*
- * path info entry/entries.
- */
- struct fcgs_ftrace_path_info_s path_info[1];
-
-};
-
-/*
-* Fabric Config Server : FCPing
- */
-
-/*
- * FC Ping Request
- */
-struct fcgs_fcping_req_s{
- u32 revision;
- u16 port_tag;
- u16 port_len; /* Port len */
- union fcgs_port_val_u port_val; /* Port value */
- u32 token;
-};
-
-/*
- * FC Ping Response
- */
-struct fcgs_fcping_resp_s{
- u32 token;
-};
-
-/*
- * Command codes for zone server query.
- */
-enum {
- ZS_GZME = 0x0124, /* Get zone member extended */
-};
-
-/*
- * ZS GZME request
- */
-#define ZS_GZME_ZNAMELEN 32
-struct zs_gzme_req_s{
- u8 znamelen;
- u8 rsvd[3];
- u8 zname[ZS_GZME_ZNAMELEN];
-};
-
-enum zs_mbr_type{
- ZS_MBR_TYPE_PWWN = 1,
- ZS_MBR_TYPE_DOMPORT = 2,
- ZS_MBR_TYPE_PORTID = 3,
- ZS_MBR_TYPE_NWWN = 4,
-};
-
-struct zs_mbr_wwn_s{
- u8 mbr_type;
- u8 rsvd[3];
- wwn_t wwn;
-};
-
-struct zs_query_resp_s{
- u32 nmbrs; /* number of zone members */
- struct zs_mbr_wwn_s mbr[1];
-};
-
-/*
- * GMAL Command ( Get ( interconnect Element) Management Address List)
- * To retrieve the IP Address of a Switch.
- */
-
-#define CT_GMAL_RESP_PREFIX_TELNET "telnet://"
-#define CT_GMAL_RESP_PREFIX_HTTP "http://"
-
-/* GMAL/GFN request */
-struct fcgs_req_s {
- wwn_t wwn; /* PWWN/NWWN */
-};
-
-#define fcgs_gmal_req_t struct fcgs_req_s
-#define fcgs_gfn_req_t struct fcgs_req_s
-
-/* Accept Response to GMAL */
-struct fcgs_gmal_resp_s {
- u32 ms_len; /* Num of entries */
- u8 ms_ma[256];
-};
-
-struct fc_gmal_entry_s {
- u8 len;
- u8 prefix[7]; /* like "http://" */
- u8 ip_addr[248];
-};
-
-#pragma pack()
-
-#endif
diff --git a/drivers/scsi/bfa/include/protocol/fc.h b/drivers/scsi/bfa/include/protocol/fc.h
deleted file mode 100644
index 436dd7c..0000000
--- a/drivers/scsi/bfa/include/protocol/fc.h
+++ /dev/null
@@ -1,1111 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __FC_H__
-#define __FC_H__
-
-#include <protocol/types.h>
-
-#pragma pack(1)
-
-/*
- * Fibre Channel Header Structure (FCHS) definition
- */
-struct fchs_s {
-#ifdef __BIGENDIAN
- u32 routing:4; /* routing bits */
- u32 cat_info:4; /* category info */
-#else
- u32 cat_info:4; /* category info */
- u32 routing:4; /* routing bits */
-#endif
- u32 d_id:24; /* destination identifier */
-
- u32 cs_ctl:8; /* class specific control */
- u32 s_id:24; /* source identifier */
-
- u32 type:8; /* data structure type */
- u32 f_ctl:24; /* initial frame control */
-
- u8 seq_id; /* sequence identifier */
- u8 df_ctl; /* data field control */
- u16 seq_cnt; /* sequence count */
-
- u16 ox_id; /* originator exchange ID */
- u16 rx_id; /* responder exchange ID */
-
- u32 ro; /* relative offset */
-};
-
-#define FC_SOF_LEN 4
-#define FC_EOF_LEN 4
-#define FC_CRC_LEN 4
-
-/*
- * Fibre Channel BB_E Header Structure
- */
-struct fcbbehs_s {
- u16 ver_rsvd;
- u32 rsvd[2];
- u32 rsvd__sof;
-};
-
-#define FC_SEQ_ID_MAX 256
-
-/*
- * routing bit definitions
- */
-enum {
- FC_RTG_FC4_DEV_DATA = 0x0, /* FC-4 Device Data */
- FC_RTG_EXT_LINK = 0x2, /* Extended Link Data */
- FC_RTG_FC4_LINK_DATA = 0x3, /* FC-4 Link Data */
- FC_RTG_VIDEO_DATA = 0x4, /* Video Data */
- FC_RTG_EXT_HDR = 0x5, /* VFT, IFR or Encapsuled */
- FC_RTG_BASIC_LINK = 0x8, /* Basic Link data */
- FC_RTG_LINK_CTRL = 0xC, /* Link Control */
-};
-
-/*
- * information category for extended link data and FC-4 Link Data
- */
-enum {
- FC_CAT_LD_REQUEST = 0x2, /* Request */
- FC_CAT_LD_REPLY = 0x3, /* Reply */
- FC_CAT_LD_DIAG = 0xF, /* for DIAG use only */
-};
-
-/*
- * information category for extended headers (VFT, IFR or encapsulation)
- */
-enum {
- FC_CAT_VFT_HDR = 0x0, /* Virtual fabric tagging header */
- FC_CAT_IFR_HDR = 0x1, /* Inter-Fabric routing header */
- FC_CAT_ENC_HDR = 0x2, /* Encapsulation header */
-};
-
-/*
- * information category for FC-4 device data
- */
-enum {
- FC_CAT_UNCATEG_INFO = 0x0, /* Uncategorized information */
- FC_CAT_SOLICIT_DATA = 0x1, /* Solicited Data */
- FC_CAT_UNSOLICIT_CTRL = 0x2, /* Unsolicited Control */
- FC_CAT_SOLICIT_CTRL = 0x3, /* Solicited Control */
- FC_CAT_UNSOLICIT_DATA = 0x4, /* Unsolicited Data */
- FC_CAT_DATA_DESC = 0x5, /* Data Descriptor */
- FC_CAT_UNSOLICIT_CMD = 0x6, /* Unsolicited Command */
- FC_CAT_CMD_STATUS = 0x7, /* Command Status */
-};
-
-/*
- * information category for Link Control
- */
-enum {
- FC_CAT_ACK_1 = 0x00,
- FC_CAT_ACK_0_N = 0x01,
- FC_CAT_P_RJT = 0x02,
- FC_CAT_F_RJT = 0x03,
- FC_CAT_P_BSY = 0x04,
- FC_CAT_F_BSY_DATA = 0x05,
- FC_CAT_F_BSY_LINK_CTL = 0x06,
- FC_CAT_F_LCR = 0x07,
- FC_CAT_NTY = 0x08,
- FC_CAT_END = 0x09,
-};
-
-/*
- * Type Field Definitions. FC-PH Section 18.5 pg. 165
- */
-enum {
- FC_TYPE_BLS = 0x0, /* Basic Link Service */
- FC_TYPE_ELS = 0x1, /* Extended Link Service */
- FC_TYPE_IP = 0x5, /* IP */
- FC_TYPE_FCP = 0x8, /* SCSI-FCP */
- FC_TYPE_GPP = 0x9, /* SCSI_GPP */
- FC_TYPE_SERVICES = 0x20, /* Fibre Channel Services */
- FC_TYPE_FC_FSS = 0x22, /* Fabric Switch Services */
- FC_TYPE_FC_AL = 0x23, /* FC-AL */
- FC_TYPE_FC_SNMP = 0x24, /* FC-SNMP */
- FC_TYPE_MAX = 256, /* 256 FC-4 types */
-};
-
-struct fc_fc4types_s{
- u8 bits[FC_TYPE_MAX / 8];
-};
-
-/*
- * Frame Control Definitions. FC-PH Table-45. pg. 168
- */
-enum {
- FCTL_EC_ORIG = 0x000000, /* exchange originator */
- FCTL_EC_RESP = 0x800000, /* exchange responder */
- FCTL_SEQ_INI = 0x000000, /* sequence initiator */
- FCTL_SEQ_REC = 0x400000, /* sequence recipient */
- FCTL_FS_EXCH = 0x200000, /* first sequence of xchg */
- FCTL_LS_EXCH = 0x100000, /* last sequence of xchg */
- FCTL_END_SEQ = 0x080000, /* last frame of sequence */
- FCTL_SI_XFER = 0x010000, /* seq initiative transfer */
- FCTL_RO_PRESENT = 0x000008, /* relative offset present */
- FCTL_FILLBYTE_MASK = 0x000003 /* , fill byte mask */
-};
-
-/*
- * Fabric Well Known Addresses
- */
-enum {
- FC_MIN_WELL_KNOWN_ADDR = 0xFFFFF0,
- FC_DOMAIN_CONTROLLER_MASK = 0xFFFC00,
- FC_ALIAS_SERVER = 0xFFFFF8,
- FC_MGMT_SERVER = 0xFFFFFA,
- FC_TIME_SERVER = 0xFFFFFB,
- FC_NAME_SERVER = 0xFFFFFC,
- FC_FABRIC_CONTROLLER = 0xFFFFFD,
- FC_FABRIC_PORT = 0xFFFFFE,
- FC_BROADCAST_SERVER = 0xFFFFFF
-};
-
-/*
- * domain/area/port defines
- */
-#define FC_DOMAIN_MASK 0xFF0000
-#define FC_DOMAIN_SHIFT 16
-#define FC_AREA_MASK 0x00FF00
-#define FC_AREA_SHIFT 8
-#define FC_PORT_MASK 0x0000FF
-#define FC_PORT_SHIFT 0
-
-#define FC_GET_DOMAIN(p) (((p) & FC_DOMAIN_MASK) >> FC_DOMAIN_SHIFT)
-#define FC_GET_AREA(p) (((p) & FC_AREA_MASK) >> FC_AREA_SHIFT)
-#define FC_GET_PORT(p) (((p) & FC_PORT_MASK) >> FC_PORT_SHIFT)
-
-#define FC_DOMAIN_CTRLR(p) (FC_DOMAIN_CONTROLLER_MASK | (FC_GET_DOMAIN(p)))
-
-enum {
- FC_RXID_ANY = 0xFFFFU,
-};
-
-/*
- * generic ELS command
- */
-struct fc_els_cmd_s{
- u32 els_code:8; /* ELS Command Code */
- u32 reserved:24;
-};
-
-/*
- * ELS Command Codes. FC-PH Table-75. pg. 223
- */
-enum {
- FC_ELS_LS_RJT = 0x1, /* Link Service Reject. */
- FC_ELS_ACC = 0x02, /* Accept */
- FC_ELS_PLOGI = 0x03, /* N_Port Login. */
- FC_ELS_FLOGI = 0x04, /* F_Port Login. */
- FC_ELS_LOGO = 0x05, /* Logout. */
- FC_ELS_ABTX = 0x06, /* Abort Exchange */
- FC_ELS_RES = 0x08, /* Read Exchange status */
- FC_ELS_RSS = 0x09, /* Read sequence status block */
- FC_ELS_RSI = 0x0A, /* Request Sequence Initiative */
- FC_ELS_ESTC = 0x0C, /* Estimate Credit. */
- FC_ELS_RTV = 0x0E, /* Read Timeout Value. */
- FC_ELS_RLS = 0x0F, /* Read Link Status. */
- FC_ELS_ECHO = 0x10, /* Echo */
- FC_ELS_TEST = 0x11, /* Test */
- FC_ELS_RRQ = 0x12, /* Reinstate Recovery Qualifier. */
- FC_ELS_REC = 0x13, /* Add this for TAPE support in FCR */
- FC_ELS_PRLI = 0x20, /* Process Login */
- FC_ELS_PRLO = 0x21, /* Process Logout. */
- FC_ELS_SCN = 0x22, /* State Change Notification. */
- FC_ELS_TPRLO = 0x24, /* Third Party Process Logout. */
- FC_ELS_PDISC = 0x50, /* Discover N_Port Parameters. */
- FC_ELS_FDISC = 0x51, /* Discover F_Port Parameters. */
- FC_ELS_ADISC = 0x52, /* Discover Address. */
- FC_ELS_FAN = 0x60, /* Fabric Address Notification */
- FC_ELS_RSCN = 0x61, /* Reg State Change Notification */
- FC_ELS_SCR = 0x62, /* State Change Registration. */
- FC_ELS_RTIN = 0x77, /* Mangement server request */
- FC_ELS_RNID = 0x78, /* Mangement server request */
- FC_ELS_RLIR = 0x79, /* Registered Link Incident Record */
-
- FC_ELS_RPSC = 0x7D, /* Report Port Speed Capabilities */
- FC_ELS_QSA = 0x7E, /* Query Security Attributes. Ref FC-SP */
- FC_ELS_E2E_LBEACON = 0x81,
- /* End-to-End Link Beacon */
- FC_ELS_AUTH = 0x90, /* Authentication. Ref FC-SP */
- FC_ELS_RFCN = 0x97, /* Request Fabric Change Notification. Ref
- *FC-SP */
-
-};
-
-/*
- * Version numbers for FC-PH standards,
- * used in login to indicate what port
- * supports. See FC-PH-X table 158.
- */
-enum {
- FC_PH_VER_4_3 = 0x09,
- FC_PH_VER_PH_3 = 0x20,
-};
-
-/*
- * PDU size defines
- */
-enum {
- FC_MIN_PDUSZ = 512,
- FC_MAX_PDUSZ = 2112,
-};
-
-/*
- * N_Port PLOGI Common Service Parameters.
- * FC-PH-x. Figure-76. pg. 308.
- */
-struct fc_plogi_csp_s{
- u8 verhi; /* FC-PH high version */
- u8 verlo; /* FC-PH low version */
- u16 bbcred; /* BB_Credit */
-
-#ifdef __BIGENDIAN
- u8 ciro:1, /* continuously increasing RO */
- rro:1, /* random relative offset */
- npiv_supp:1, /* NPIV supported */
- port_type:1, /* N_Port/F_port */
- altbbcred:1, /* alternate BB_Credit */
- resolution:1, /* ms/ns ED_TOV resolution */
- vvl_info:1, /* VVL Info included */
- reserved1:1;
-
- u8 hg_supp:1,
- query_dbc:1,
- security:1,
- sync_cap:1,
- r_t_tov:1,
- dh_dup_supp:1,
- cisc:1, /* continuously increasing seq count */
- payload:1;
-#else
- u8 reserved2:2,
- resolution:1, /* ms/ns ED_TOV resolution */
- altbbcred:1, /* alternate BB_Credit */
- port_type:1, /* N_Port/F_port */
- npiv_supp:1, /* NPIV supported */
- rro:1, /* random relative offset */
- ciro:1; /* continuously increasing RO */
-
- u8 payload:1,
- cisc:1, /* continuously increasing seq count */
- dh_dup_supp:1,
- r_t_tov:1,
- sync_cap:1,
- security:1,
- query_dbc:1,
- hg_supp:1;
-#endif
-
- u16 rxsz; /* recieve data_field size */
-
- u16 conseq;
- u16 ro_bitmap;
-
- u32 e_d_tov;
-};
-
-/*
- * N_Port PLOGI Class Specific Parameters.
- * FC-PH-x. Figure 78. pg. 318.
- */
-struct fc_plogi_clp_s{
-#ifdef __BIGENDIAN
- u32 class_valid:1;
- u32 intermix:1; /* class intermix supported if set =1.
- * valid only for class1. Reserved for
- * class2 & class3
- */
- u32 reserved1:2;
- u32 sequential:1;
- u32 reserved2:3;
-#else
- u32 reserved2:3;
- u32 sequential:1;
- u32 reserved1:2;
- u32 intermix:1; /* class intermix supported if set =1.
- * valid only for class1. Reserved for
- * class2 & class3
- */
- u32 class_valid:1;
-#endif
-
- u32 reserved3:24;
-
- u32 reserved4:16;
- u32 rxsz:16; /* Receive data_field size */
-
- u32 reserved5:8;
- u32 conseq:8;
- u32 e2e_credit:16; /* end to end credit */
-
- u32 reserved7:8;
- u32 ospx:8;
- u32 reserved8:16;
-};
-
-#define FLOGI_VVL_BRCD 0x42524344 /* ASCII value for each character in
- * string "BRCD" */
-
-/*
- * PLOGI els command and reply payload
- */
-struct fc_logi_s{
- struct fc_els_cmd_s els_cmd; /* ELS command code */
- struct fc_plogi_csp_s csp; /* common service params */
- wwn_t port_name;
- wwn_t node_name;
- struct fc_plogi_clp_s class1; /* class 1 service parameters */
- struct fc_plogi_clp_s class2; /* class 2 service parameters */
- struct fc_plogi_clp_s class3; /* class 3 service parameters */
- struct fc_plogi_clp_s class4; /* class 4 service parameters */
- u8 vvl[16]; /* vendor version level */
-};
-
-/*
- * LOGO els command payload
- */
-struct fc_logo_s{
- struct fc_els_cmd_s els_cmd; /* ELS command code */
- u32 res1:8;
- u32 nport_id:24; /* N_Port identifier of source */
- wwn_t orig_port_name; /* Port name of the LOGO originator */
-};
-
-/*
- * ADISC els command payload
- */
-struct fc_adisc_s {
- struct fc_els_cmd_s els_cmd; /* ELS command code */
- u32 res1:8;
- u32 orig_HA:24; /* originator hard address */
- wwn_t orig_port_name; /* originator port name */
- wwn_t orig_node_name; /* originator node name */
- u32 res2:8;
- u32 nport_id:24; /* originator NPortID */
-};
-
-/*
- * Exchange status block
- */
-struct fc_exch_status_blk_s{
- u32 oxid:16;
- u32 rxid:16;
- u32 res1:8;
- u32 orig_np:24; /* originator NPortID */
- u32 res2:8;
- u32 resp_np:24; /* responder NPortID */
- u32 es_bits;
- u32 res3;
- /*
- * un modified section of the fields
- */
-};
-
-/*
- * RES els command payload
- */
-struct fc_res_s {
- struct fc_els_cmd_s els_cmd; /* ELS command code */
- u32 res1:8;
- u32 nport_id:24; /* N_Port identifier of source */
- u32 oxid:16;
- u32 rxid:16;
- u8 assoc_hdr[32];
-};
-
-/*
- * RES els accept payload
- */
-struct fc_res_acc_s{
- struct fc_els_cmd_s els_cmd; /* ELS command code */
- struct fc_exch_status_blk_s fc_exch_blk; /* Exchange status block */
-};
-
-/*
- * REC els command payload
- */
-struct fc_rec_s {
- struct fc_els_cmd_s els_cmd; /* ELS command code */
- u32 res1:8;
- u32 nport_id:24; /* N_Port identifier of source */
- u32 oxid:16;
- u32 rxid:16;
-};
-
-#define FC_REC_ESB_OWN_RSP 0x80000000 /* responder owns */
-#define FC_REC_ESB_SI 0x40000000 /* SI is owned */
-#define FC_REC_ESB_COMP 0x20000000 /* exchange is complete */
-#define FC_REC_ESB_ENDCOND_ABN 0x10000000 /* abnormal ending */
-#define FC_REC_ESB_RQACT 0x04000000 /* recovery qual active */
-#define FC_REC_ESB_ERRP_MSK 0x03000000
-#define FC_REC_ESB_OXID_INV 0x00800000 /* invalid OXID */
-#define FC_REC_ESB_RXID_INV 0x00400000 /* invalid RXID */
-#define FC_REC_ESB_PRIO_INUSE 0x00200000
-
-/*
- * REC els accept payload
- */
-struct fc_rec_acc_s {
- struct fc_els_cmd_s els_cmd; /* ELS command code */
- u32 oxid:16;
- u32 rxid:16;
- u32 res1:8;
- u32 orig_id:24; /* N_Port id of exchange originator */
- u32 res2:8;
- u32 resp_id:24; /* N_Port id of exchange responder */
- u32 count; /* data transfer count */
- u32 e_stat; /* exchange status */
-};
-
-/*
- * RSI els payload
- */
-struct fc_rsi_s {
- struct fc_els_cmd_s els_cmd;
- u32 res1:8;
- u32 orig_sid:24;
- u32 oxid:16;
- u32 rxid:16;
-};
-
-/*
- * structure for PRLI paramater pages, both request & response
- * see FC-PH-X table 113 & 115 for explanation also FCP table 8
- */
-struct fc_prli_params_s{
- u32 reserved:16;
-#ifdef __BIGENDIAN
- u32 reserved1:5;
- u32 rec_support:1;
- u32 task_retry_id:1;
- u32 retry:1;
-
- u32 confirm:1;
- u32 doverlay:1;
- u32 initiator:1;
- u32 target:1;
- u32 cdmix:1;
- u32 drmix:1;
- u32 rxrdisab:1;
- u32 wxrdisab:1;
-#else
- u32 retry:1;
- u32 task_retry_id:1;
- u32 rec_support:1;
- u32 reserved1:5;
-
- u32 wxrdisab:1;
- u32 rxrdisab:1;
- u32 drmix:1;
- u32 cdmix:1;
- u32 target:1;
- u32 initiator:1;
- u32 doverlay:1;
- u32 confirm:1;
-#endif
-};
-
-/*
- * valid values for rspcode in PRLI ACC payload
- */
-enum {
- FC_PRLI_ACC_XQTD = 0x1, /* request executed */
- FC_PRLI_ACC_PREDEF_IMG = 0x5, /* predefined image - no prli needed */
-};
-
-struct fc_prli_params_page_s{
- u32 type:8;
- u32 codext:8;
-#ifdef __BIGENDIAN
- u32 origprocasv:1;
- u32 rsppav:1;
- u32 imagepair:1;
- u32 reserved1:1;
- u32 rspcode:4;
-#else
- u32 rspcode:4;
- u32 reserved1:1;
- u32 imagepair:1;
- u32 rsppav:1;
- u32 origprocasv:1;
-#endif
- u32 reserved2:8;
-
- u32 origprocas;
- u32 rspprocas;
- struct fc_prli_params_s servparams;
-};
-
-/*
- * PRLI request and accept payload, FC-PH-X tables 112 & 114
- */
-struct fc_prli_s{
- u32 command:8;
- u32 pglen:8;
- u32 pagebytes:16;
- struct fc_prli_params_page_s parampage;
-};
-
-/*
- * PRLO logout params page
- */
-struct fc_prlo_params_page_s{
- u32 type:8;
- u32 type_ext:8;
-#ifdef __BIGENDIAN
- u32 opa_valid:1; /* originator process associator
- * valid
- */
- u32 rpa_valid:1; /* responder process associator valid */
- u32 res1:14;
-#else
- u32 res1:14;
- u32 rpa_valid:1; /* responder process associator valid */
- u32 opa_valid:1; /* originator process associator
- * valid
- */
-#endif
- u32 orig_process_assc;
- u32 resp_process_assc;
-
- u32 res2;
-};
-
-/*
- * PRLO els command payload
- */
-struct fc_prlo_s{
- u32 command:8;
- u32 page_len:8;
- u32 payload_len:16;
- struct fc_prlo_params_page_s prlo_params[1];
-};
-
-/*
- * PRLO Logout response parameter page
- */
-struct fc_prlo_acc_params_page_s{
- u32 type:8;
- u32 type_ext:8;
-
-#ifdef __BIGENDIAN
- u32 opa_valid:1; /* originator process associator
- * valid
- */
- u32 rpa_valid:1; /* responder process associator valid */
- u32 res1:14;
-#else
- u32 res1:14;
- u32 rpa_valid:1; /* responder process associator valid */
- u32 opa_valid:1; /* originator process associator
- * valid
- */
-#endif
- u32 orig_process_assc;
- u32 resp_process_assc;
-
- u32 fc4type_csp;
-};
-
-/*
- * PRLO els command ACC payload
- */
-struct fc_prlo_acc_s{
- u32 command:8;
- u32 page_len:8;
- u32 payload_len:16;
- struct fc_prlo_acc_params_page_s prlo_acc_params[1];
-};
-
-/*
- * SCR els command payload
- */
-enum {
- FC_SCR_REG_FUNC_FABRIC_DETECTED = 0x01,
- FC_SCR_REG_FUNC_N_PORT_DETECTED = 0x02,
- FC_SCR_REG_FUNC_FULL = 0x03,
- FC_SCR_REG_FUNC_CLEAR_REG = 0xFF,
-};
-
-/* SCR VU registrations */
-enum {
- FC_VU_SCR_REG_FUNC_FABRIC_NAME_CHANGE = 0x01
-};
-
-struct fc_scr_s{
- u32 command:8;
- u32 res:24;
- u32 vu_reg_func:8; /* Vendor Unique Registrations */
- u32 res1:16;
- u32 reg_func:8;
-};
-
-/*
- * Information category for Basic link data
- */
-enum {
- FC_CAT_NOP = 0x0,
- FC_CAT_ABTS = 0x1,
- FC_CAT_RMC = 0x2,
- FC_CAT_BA_ACC = 0x4,
- FC_CAT_BA_RJT = 0x5,
- FC_CAT_PRMT = 0x6,
-};
-
-/*
- * LS_RJT els reply payload
- */
-struct fc_ls_rjt_s {
- struct fc_els_cmd_s els_cmd; /* ELS command code */
- u32 res1:8;
- u32 reason_code:8; /* Reason code for reject */
- u32 reason_code_expl:8; /* Reason code explanation */
- u32 vendor_unique:8; /* Vendor specific */
-};
-
-/*
- * LS_RJT reason codes
- */
-enum {
- FC_LS_RJT_RSN_INV_CMD_CODE = 0x01,
- FC_LS_RJT_RSN_LOGICAL_ERROR = 0x03,
- FC_LS_RJT_RSN_LOGICAL_BUSY = 0x05,
- FC_LS_RJT_RSN_PROTOCOL_ERROR = 0x07,
- FC_LS_RJT_RSN_UNABLE_TO_PERF_CMD = 0x09,
- FC_LS_RJT_RSN_CMD_NOT_SUPP = 0x0B,
-};
-
-/*
- * LS_RJT reason code explanation
- */
-enum {
- FC_LS_RJT_EXP_NO_ADDL_INFO = 0x00,
- FC_LS_RJT_EXP_SPARMS_ERR_OPTIONS = 0x01,
- FC_LS_RJT_EXP_SPARMS_ERR_INI_CTL = 0x03,
- FC_LS_RJT_EXP_SPARMS_ERR_REC_CTL = 0x05,
- FC_LS_RJT_EXP_SPARMS_ERR_RXSZ = 0x07,
- FC_LS_RJT_EXP_SPARMS_ERR_CONSEQ = 0x09,
- FC_LS_RJT_EXP_SPARMS_ERR_CREDIT = 0x0B,
- FC_LS_RJT_EXP_INV_PORT_NAME = 0x0D,
- FC_LS_RJT_EXP_INV_NODE_FABRIC_NAME = 0x0E,
- FC_LS_RJT_EXP_INV_CSP = 0x0F,
- FC_LS_RJT_EXP_INV_ASSOC_HDR = 0x11,
- FC_LS_RJT_EXP_ASSOC_HDR_REQD = 0x13,
- FC_LS_RJT_EXP_INV_ORIG_S_ID = 0x15,
- FC_LS_RJT_EXP_INV_OXID_RXID_COMB = 0x17,
- FC_LS_RJT_EXP_CMD_ALREADY_IN_PROG = 0x19,
- FC_LS_RJT_EXP_LOGIN_REQUIRED = 0x1E,
- FC_LS_RJT_EXP_INVALID_NPORT_ID = 0x1F,
- FC_LS_RJT_EXP_INSUFF_RES = 0x29,
- FC_LS_RJT_EXP_CMD_NOT_SUPP = 0x2C,
- FC_LS_RJT_EXP_INV_PAYLOAD_LEN = 0x2D,
-};
-
-/*
- * RRQ els command payload
- */
-struct fc_rrq_s{
- struct fc_els_cmd_s els_cmd; /* ELS command code */
- u32 res1:8;
- u32 s_id:24; /* exchange originator S_ID */
-
- u32 ox_id:16; /* originator exchange ID */
- u32 rx_id:16; /* responder exchange ID */
-
- u32 res2[8]; /* optional association header */
-};
-
-/*
- * ABTS BA_ACC reply payload
- */
-struct fc_ba_acc_s{
- u32 seq_id_valid:8; /* set to 0x00 for Abort Exchange */
- u32 seq_id:8; /* invalid for Abort Exchange */
- u32 res2:16;
- u32 ox_id:16; /* OX_ID from ABTS frame */
- u32 rx_id:16; /* RX_ID from ABTS frame */
- u32 low_seq_cnt:16; /* set to 0x0000 for Abort Exchange */
- u32 high_seq_cnt:16;/* set to 0xFFFF for Abort Exchange */
-};
-
-/*
- * ABTS BA_RJT reject payload
- */
-struct fc_ba_rjt_s{
- u32 res1:8; /* Reserved */
- u32 reason_code:8; /* reason code for reject */
- u32 reason_expl:8; /* reason code explanation */
- u32 vendor_unique:8;/* vendor unique reason code,set to 0 */
-};
-
-/*
- * TPRLO logout parameter page
- */
-struct fc_tprlo_params_page_s{
- u32 type:8;
- u32 type_ext:8;
-
-#ifdef __BIGENDIAN
- u32 opa_valid:1;
- u32 rpa_valid:1;
- u32 tpo_nport_valid:1;
- u32 global_process_logout:1;
- u32 res1:12;
-#else
- u32 res1:12;
- u32 global_process_logout:1;
- u32 tpo_nport_valid:1;
- u32 rpa_valid:1;
- u32 opa_valid:1;
-#endif
-
- u32 orig_process_assc;
- u32 resp_process_assc;
-
- u32 res2:8;
- u32 tpo_nport_id;
-};
-
-/*
- * TPRLO ELS command payload
- */
-struct fc_tprlo_s{
- u32 command:8;
- u32 page_len:8;
- u32 payload_len:16;
-
- struct fc_tprlo_params_page_s tprlo_params[1];
-};
-
-enum fc_tprlo_type{
- FC_GLOBAL_LOGO = 1,
- FC_TPR_LOGO
-};
-
-/*
- * TPRLO els command ACC payload
- */
-struct fc_tprlo_acc_s{
- u32 command:8;
- u32 page_len:8;
- u32 payload_len:16;
- struct fc_prlo_acc_params_page_s tprlo_acc_params[1];
-};
-
-/*
- * RSCN els command req payload
- */
-#define FC_RSCN_PGLEN 0x4
-
-enum fc_rscn_format{
- FC_RSCN_FORMAT_PORTID = 0x0,
- FC_RSCN_FORMAT_AREA = 0x1,
- FC_RSCN_FORMAT_DOMAIN = 0x2,
- FC_RSCN_FORMAT_FABRIC = 0x3,
-};
-
-struct fc_rscn_event_s{
- u32 format:2;
- u32 qualifier:4;
- u32 resvd:2;
- u32 portid:24;
-};
-
-struct fc_rscn_pl_s{
- u8 command;
- u8 pagelen;
- u16 payldlen;
- struct fc_rscn_event_s event[1];
-};
-
-/*
- * ECHO els command req payload
- */
-struct fc_echo_s {
- struct fc_els_cmd_s els_cmd;
-};
-
-/*
- * RNID els command
- */
-
-#define RNID_NODEID_DATA_FORMAT_COMMON 0x00
-#define RNID_NODEID_DATA_FORMAT_FCP3 0x08
-#define RNID_NODEID_DATA_FORMAT_DISCOVERY 0xDF
-
-#define RNID_ASSOCIATED_TYPE_UNKNOWN 0x00000001
-#define RNID_ASSOCIATED_TYPE_OTHER 0x00000002
-#define RNID_ASSOCIATED_TYPE_HUB 0x00000003
-#define RNID_ASSOCIATED_TYPE_SWITCH 0x00000004
-#define RNID_ASSOCIATED_TYPE_GATEWAY 0x00000005
-#define RNID_ASSOCIATED_TYPE_STORAGE_DEVICE 0x00000009
-#define RNID_ASSOCIATED_TYPE_HOST 0x0000000A
-#define RNID_ASSOCIATED_TYPE_STORAGE_SUBSYSTEM 0x0000000B
-#define RNID_ASSOCIATED_TYPE_STORAGE_ACCESS_DEVICE 0x0000000E
-#define RNID_ASSOCIATED_TYPE_NAS_SERVER 0x00000011
-#define RNID_ASSOCIATED_TYPE_BRIDGE 0x00000002
-#define RNID_ASSOCIATED_TYPE_VIRTUALIZATION_DEVICE 0x00000003
-#define RNID_ASSOCIATED_TYPE_MULTI_FUNCTION_DEVICE 0x000000FF
-
-/*
- * RNID els command payload
- */
-struct fc_rnid_cmd_s{
- struct fc_els_cmd_s els_cmd;
- u32 node_id_data_format:8;
- u32 reserved:24;
-};
-
-/*
- * RNID els response payload
- */
-
-struct fc_rnid_common_id_data_s{
- wwn_t port_name;
- wwn_t node_name;
-};
-
-struct fc_rnid_general_topology_data_s{
- u32 vendor_unique[4];
- u32 asso_type;
- u32 phy_port_num;
- u32 num_attached_nodes;
- u32 node_mgmt:8;
- u32 ip_version:8;
- u32 udp_tcp_port_num:16;
- u32 ip_address[4];
- u32 reserved:16;
- u32 vendor_specific:16;
-};
-
-struct fc_rnid_acc_s{
- struct fc_els_cmd_s els_cmd;
- u32 node_id_data_format:8;
- u32 common_id_data_length:8;
- u32 reserved:8;
- u32 specific_id_data_length:8;
- struct fc_rnid_common_id_data_s common_id_data;
- struct fc_rnid_general_topology_data_s gen_topology_data;
-};
-
-#define RNID_ASSOCIATED_TYPE_UNKNOWN 0x00000001
-#define RNID_ASSOCIATED_TYPE_OTHER 0x00000002
-#define RNID_ASSOCIATED_TYPE_HUB 0x00000003
-#define RNID_ASSOCIATED_TYPE_SWITCH 0x00000004
-#define RNID_ASSOCIATED_TYPE_GATEWAY 0x00000005
-#define RNID_ASSOCIATED_TYPE_STORAGE_DEVICE 0x00000009
-#define RNID_ASSOCIATED_TYPE_HOST 0x0000000A
-#define RNID_ASSOCIATED_TYPE_STORAGE_SUBSYSTEM 0x0000000B
-#define RNID_ASSOCIATED_TYPE_STORAGE_ACCESS_DEVICE 0x0000000E
-#define RNID_ASSOCIATED_TYPE_NAS_SERVER 0x00000011
-#define RNID_ASSOCIATED_TYPE_BRIDGE 0x00000002
-#define RNID_ASSOCIATED_TYPE_VIRTUALIZATION_DEVICE 0x00000003
-#define RNID_ASSOCIATED_TYPE_MULTI_FUNCTION_DEVICE 0x000000FF
-
-enum fc_rpsc_speed_cap{
- RPSC_SPEED_CAP_1G = 0x8000,
- RPSC_SPEED_CAP_2G = 0x4000,
- RPSC_SPEED_CAP_4G = 0x2000,
- RPSC_SPEED_CAP_10G = 0x1000,
- RPSC_SPEED_CAP_8G = 0x0800,
- RPSC_SPEED_CAP_16G = 0x0400,
-
- RPSC_SPEED_CAP_UNKNOWN = 0x0001,
-};
-
-enum fc_rpsc_op_speed_s{
- RPSC_OP_SPEED_1G = 0x8000,
- RPSC_OP_SPEED_2G = 0x4000,
- RPSC_OP_SPEED_4G = 0x2000,
- RPSC_OP_SPEED_10G = 0x1000,
- RPSC_OP_SPEED_8G = 0x0800,
- RPSC_OP_SPEED_16G = 0x0400,
-
- RPSC_OP_SPEED_NOT_EST = 0x0001, /*! speed not established */
-};
-
-struct fc_rpsc_speed_info_s{
- u16 port_speed_cap; /*! see fc_rpsc_speed_cap_t */
- u16 port_op_speed; /*! see fc_rpsc_op_speed_t */
-};
-
-enum link_e2e_beacon_subcmd{
- LINK_E2E_BEACON_ON = 1,
- LINK_E2E_BEACON_OFF = 2
-};
-
-enum beacon_type{
- BEACON_TYPE_NORMAL = 1, /*! Normal Beaconing. Green */
- BEACON_TYPE_WARN = 2, /*! Warning Beaconing. Yellow/Amber */
- BEACON_TYPE_CRITICAL = 3 /*! Critical Beaconing. Red */
-};
-
-struct link_e2e_beacon_param_s {
- u8 beacon_type; /* Beacon Type. See beacon_type_t */
- u8 beacon_frequency;
- /* Beacon frequency. Number of blinks
- * per 10 seconds
- */
- u16 beacon_duration;/* Beacon duration (in Seconds). The
- * command operation should be
- * terminated at the end of this
- * timeout value.
- *
- * Ignored if diag_sub_cmd is
- * LINK_E2E_BEACON_OFF.
- *
- * If 0, beaconing will continue till a
- * BEACON OFF request is received
- */
-};
-
-/*
- * Link E2E beacon request/good response format. For LS_RJTs use fc_ls_rjt_t
- */
-struct link_e2e_beacon_req_s{
- u32 ls_code; /*! FC_ELS_E2E_LBEACON in requests *
- *or FC_ELS_ACC in good replies */
- u32 ls_sub_cmd; /*! See link_e2e_beacon_subcmd_t */
- struct link_e2e_beacon_param_s beacon_parm;
-};
-
-/**
- * If RPSC request is sent to the Domain Controller, the request is for
- * all the ports within that domain (TODO - I don't think FOS implements
- * this...).
- */
-struct fc_rpsc_cmd_s{
- struct fc_els_cmd_s els_cmd;
-};
-
-/*
- * RPSC Acc
- */
-struct fc_rpsc_acc_s{
- u32 command:8;
- u32 rsvd:8;
- u32 num_entries:16;
-
- struct fc_rpsc_speed_info_s speed_info[1];
-};
-
-/**
- * If RPSC2 request is sent to the Domain Controller,
- */
-#define FC_BRCD_TOKEN 0x42524344
-
-struct fc_rpsc2_cmd_s{
- struct fc_els_cmd_s els_cmd;
- u32 token;
- u16 resvd;
- u16 num_pids; /* Number of pids in the request */
- struct {
- u32 rsvd1:8;
- u32 pid:24; /* port identifier */
- } pid_list[1];
-};
-
-enum fc_rpsc2_port_type{
- RPSC2_PORT_TYPE_UNKNOWN = 0,
- RPSC2_PORT_TYPE_NPORT = 1,
- RPSC2_PORT_TYPE_NLPORT = 2,
- RPSC2_PORT_TYPE_NPIV_PORT = 0x5f,
- RPSC2_PORT_TYPE_NPORT_TRUNK = 0x6f,
-};
-
-/*
- * RPSC2 portInfo entry structure
- */
-struct fc_rpsc2_port_info_s{
- u32 pid; /* PID */
- u16 resvd1;
- u16 index; /* port number / index */
- u8 resvd2;
- u8 type; /* port type N/NL/... */
- u16 speed; /* port Operating Speed */
-};
-
-/*
- * RPSC2 Accept payload
- */
-struct fc_rpsc2_acc_s{
- u8 els_cmd;
- u8 resvd;
- u16 num_pids; /* Number of pids in the request */
- struct fc_rpsc2_port_info_s port_info[1]; /* port information */
-};
-
-/**
- * bit fields so that multiple classes can be specified
- */
-enum fc_cos{
- FC_CLASS_2 = 0x04,
- FC_CLASS_3 = 0x08,
- FC_CLASS_2_3 = 0x0C,
-};
-
-/*
- * symbolic name
- */
-struct fc_symname_s{
- u8 symname[FC_SYMNAME_MAX];
-};
-
-struct fc_alpabm_s{
- u8 alpa_bm[FC_ALPA_MAX / 8];
-};
-
-/*
- * protocol default timeout values
- */
-#define FC_ED_TOV 2
-#define FC_REC_TOV (FC_ED_TOV + 1)
-#define FC_RA_TOV 10
-#define FC_ELS_TOV (2 * FC_RA_TOV)
-#define FC_FCCT_TOV (3 * FC_RA_TOV)
-
-/*
- * virtual fabric related defines
- */
-#define FC_VF_ID_NULL 0 /* must not be used as VF_ID */
-#define FC_VF_ID_MIN 1
-#define FC_VF_ID_MAX 0xEFF
-#define FC_VF_ID_CTL 0xFEF /* control VF_ID */
-
-/**
- * Virtual Fabric Tagging header format
- * @caution This is defined only in BIG ENDIAN format.
- */
-struct fc_vft_s{
- u32 r_ctl:8;
- u32 ver:2;
- u32 type:4;
- u32 res_a:2;
- u32 priority:3;
- u32 vf_id:12;
- u32 res_b:1;
- u32 hopct:8;
- u32 res_c:24;
-};
-
-#pragma pack()
-
-#endif
diff --git a/drivers/scsi/bfa/include/protocol/fc_sp.h b/drivers/scsi/bfa/include/protocol/fc_sp.h
deleted file mode 100644
index 55bb0b3..0000000
--- a/drivers/scsi/bfa/include/protocol/fc_sp.h
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __FC_SP_H__
-#define __FC_SP_H__
-
-#include <protocol/types.h>
-
-#pragma pack(1)
-
-enum auth_els_flags{
- FC_AUTH_ELS_MORE_FRAGS_FLAG = 0x80, /*! bit-7. More Fragments
- * Follow
- */
- FC_AUTH_ELS_CONCAT_FLAG = 0x40, /*! bit-6. Concatenation Flag */
- FC_AUTH_ELS_SEQ_NUM_FLAG = 0x01 /*! bit-0. Sequence Number */
-};
-
-enum auth_msg_codes{
- FC_AUTH_MC_AUTH_RJT = 0x0A, /*! Auth Reject */
- FC_AUTH_MC_AUTH_NEG = 0x0B, /*! Auth Negotiate */
- FC_AUTH_MC_AUTH_DONE = 0x0C, /*! Auth Done */
-
- FC_AUTH_MC_DHCHAP_CHAL = 0x10, /*! DHCHAP Challenge */
- FC_AUTH_MC_DHCHAP_REPLY = 0x11, /*! DHCHAP Reply */
- FC_AUTH_MC_DHCHAP_SUCC = 0x12, /*! DHCHAP Success */
-
- FC_AUTH_MC_FCAP_REQ = 0x13, /*! FCAP Request */
- FC_AUTH_MC_FCAP_ACK = 0x14, /*! FCAP Acknowledge */
- FC_AUTH_MC_FCAP_CONF = 0x15, /*! FCAP Confirm */
-
- FC_AUTH_MC_FCPAP_INIT = 0x16, /*! FCPAP Init */
- FC_AUTH_MC_FCPAP_ACC = 0x17, /*! FCPAP Accept */
- FC_AUTH_MC_FCPAP_COMP = 0x18, /*! FCPAP Complete */
-
- FC_AUTH_MC_IKE_SA_INIT = 0x22, /*! IKE SA INIT */
- FC_AUTH_MC_IKE_SA_AUTH = 0x23, /*! IKE SA Auth */
- FC_AUTH_MC_IKE_CREATE_CHILD_SA = 0x24, /*! IKE Create Child SA */
- FC_AUTH_MC_IKE_INFO = 0x25, /*! IKE informational */
-};
-
-enum auth_proto_version{
- FC_AUTH_PROTO_VER_1 = 1, /*! Protocol Version 1 */
-};
-
-enum {
- FC_AUTH_ELS_COMMAND_CODE = 0x90,/*! Authentication ELS Command code */
- FC_AUTH_PROTO_PARAM_LEN_SZ = 4, /*! Size of Proto Parameter Len Field */
- FC_AUTH_PROTO_PARAM_VAL_SZ = 4, /*! Size of Proto Parameter Val Field */
- FC_MAX_AUTH_SECRET_LEN = 256,
- /*! Maximum secret string length */
- FC_AUTH_NUM_USABLE_PROTO_LEN_SZ = 4,
- /*! Size of usable protocols field */
- FC_AUTH_RESP_VALUE_LEN_SZ = 4,
- /*! Size of response value length */
- FC_MAX_CHAP_KEY_LEN = 256, /*! Maximum md5 digest length */
- FC_MAX_AUTH_RETRIES = 3, /*! Maximum number of retries */
- FC_MD5_DIGEST_LEN = 16, /*! MD5 digest length */
- FC_SHA1_DIGEST_LEN = 20, /*! SHA1 digest length */
- FC_MAX_DHG_SUPPORTED = 1, /*! Maximum DH Groups supported */
- FC_MAX_ALG_SUPPORTED = 1, /*! Maximum algorithms supported */
- FC_MAX_PROTO_SUPPORTED = 1, /*! Maximum protocols supported */
- FC_START_TXN_ID = 2, /*! Starting transaction ID */
-};
-
-enum auth_proto_id{
- FC_AUTH_PROTO_DHCHAP = 0x00000001,
- FC_AUTH_PROTO_FCAP = 0x00000002,
- FC_AUTH_PROTO_FCPAP = 0x00000003,
- FC_AUTH_PROTO_IKEv2 = 0x00000004,
- FC_AUTH_PROTO_IKEv2_AUTH = 0x00000005,
-};
-
-struct auth_name_s{
- u16 name_tag; /*! Name Tag = 1 for Authentication */
- u16 name_len; /*! Name Length = 8 for Authentication
- */
- wwn_t name; /*! Name. TODO - is this PWWN */
-};
-
-
-enum auth_hash_func{
- FC_AUTH_HASH_FUNC_MD5 = 0x00000005,
- FC_AUTH_HASH_FUNC_SHA_1 = 0x00000006,
-};
-
-enum auth_dh_gid{
- FC_AUTH_DH_GID_0_DHG_NULL = 0x00000000,
- FC_AUTH_DH_GID_1_DHG_1024 = 0x00000001,
- FC_AUTH_DH_GID_2_DHG_1280 = 0x00000002,
- FC_AUTH_DH_GID_3_DHG_1536 = 0x00000003,
- FC_AUTH_DH_GID_4_DHG_2048 = 0x00000004,
- FC_AUTH_DH_GID_6_DHG_3072 = 0x00000006,
- FC_AUTH_DH_GID_7_DHG_4096 = 0x00000007,
- FC_AUTH_DH_GID_8_DHG_6144 = 0x00000008,
- FC_AUTH_DH_GID_9_DHG_8192 = 0x00000009,
-};
-
-struct auth_els_msg_s {
- u8 auth_els_code; /* Authentication ELS Code (0x90) */
- u8 auth_els_flag; /* Authentication ELS Flags */
- u8 auth_msg_code; /* Authentication Message Code */
- u8 proto_version; /* Protocol Version */
- u32 msg_len; /* Message Length */
- u32 trans_id; /* Transaction Identifier (T_ID) */
-
- /* Msg payload follows... */
-};
-
-
-enum auth_neg_param_tags {
- FC_AUTH_NEG_DHCHAP_HASHLIST = 0x0001,
- FC_AUTH_NEG_DHCHAP_DHG_ID_LIST = 0x0002,
-};
-
-
-struct dhchap_param_format_s {
- u16 tag; /*! Parameter Tag. See
- * auth_neg_param_tags_t
- */
- u16 word_cnt;
-
- /* followed by variable length parameter value... */
-};
-
-struct auth_proto_params_s {
- u32 proto_param_len;
- u32 proto_id;
-
- /*
- * Followed by variable length Protocol specific parameters. DH-CHAP
- * uses dhchap_param_format_t
- */
-};
-
-struct auth_neg_msg_s {
- struct auth_name_s auth_ini_name;
- u32 usable_auth_protos;
- struct auth_proto_params_s proto_params[1]; /*! (1..usable_auth_proto)
- * protocol params
- */
-};
-
-struct auth_dh_val_s {
- u32 dh_val_len;
- u32 dh_val[1];
-};
-
-struct auth_dhchap_chal_msg_s {
- struct auth_els_msg_s hdr;
- struct auth_name_s auth_responder_name; /* TODO VRK - is auth_name_t
- * type OK?
- */
- u32 hash_id;
- u32 dh_grp_id;
- u32 chal_val_len;
- char chal_val[1];
-
- /* ...followed by variable Challenge length/value and DH length/value */
-};
-
-
-enum auth_rjt_codes {
- FC_AUTH_RJT_CODE_AUTH_FAILURE = 0x01,
- FC_AUTH_RJT_CODE_LOGICAL_ERR = 0x02,
-};
-
-enum auth_rjt_code_exps {
- FC_AUTH_CEXP_AUTH_MECH_NOT_USABLE = 0x01,
- FC_AUTH_CEXP_DH_GROUP_NOT_USABLE = 0x02,
- FC_AUTH_CEXP_HASH_FUNC_NOT_USABLE = 0x03,
- FC_AUTH_CEXP_AUTH_XACT_STARTED = 0x04,
- FC_AUTH_CEXP_AUTH_FAILED = 0x05,
- FC_AUTH_CEXP_INCORRECT_PLD = 0x06,
- FC_AUTH_CEXP_INCORRECT_PROTO_MSG = 0x07,
- FC_AUTH_CEXP_RESTART_AUTH_PROTO = 0x08,
- FC_AUTH_CEXP_AUTH_CONCAT_NOT_SUPP = 0x09,
- FC_AUTH_CEXP_PROTO_VER_NOT_SUPP = 0x0A,
-};
-
-enum auth_status {
- FC_AUTH_STATE_INPROGRESS = 0, /*! authentication in progress */
- FC_AUTH_STATE_FAILED = 1, /*! authentication failed */
- FC_AUTH_STATE_SUCCESS = 2 /*! authentication successful */
-};
-
-struct auth_rjt_msg_s {
- struct auth_els_msg_s hdr;
- u8 reason_code;
- u8 reason_code_exp;
- u8 rsvd[2];
-};
-
-
-struct auth_dhchap_neg_msg_s {
- struct auth_els_msg_s hdr;
- struct auth_neg_msg_s nego;
-};
-
-struct auth_dhchap_reply_msg_s {
- struct auth_els_msg_s hdr;
-
- /*
- * followed by response value length & Value + DH Value Length & Value
- */
-};
-
-#pragma pack()
-
-#endif /* __FC_SP_H__ */
diff --git a/drivers/scsi/bfa/include/protocol/fcp.h b/drivers/scsi/bfa/include/protocol/fcp.h
deleted file mode 100644
index 74ea63c..0000000
--- a/drivers/scsi/bfa/include/protocol/fcp.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __FCPPROTO_H__
-#define __FCPPROTO_H__
-
-#include <linux/bitops.h>
-#include <protocol/scsi.h>
-
-#pragma pack(1)
-
-enum {
- FCP_RJT = 0x01000000, /* SRR reject */
- FCP_SRR_ACCEPT = 0x02000000, /* SRR accept */
- FCP_SRR = 0x14000000, /* Sequence Retransmission Request */
-};
-
-/*
- * SRR FC-4 LS payload
- */
-struct fc_srr_s{
- u32 ls_cmd;
- u32 ox_id:16; /* ox-id */
- u32 rx_id:16; /* rx-id */
- u32 ro; /* relative offset */
- u32 r_ctl:8; /* R_CTL for I.U. */
- u32 res:24;
-};
-
-
-/*
- * FCP_CMND definitions
- */
-#define FCP_CMND_CDB_LEN 16
-#define FCP_CMND_LUN_LEN 8
-
-struct fcp_cmnd_s{
- lun_t lun; /* 64-bit LU number */
- u8 crn; /* command reference number */
-#ifdef __BIGENDIAN
- u8 resvd:1,
- priority:4, /* FCP-3: SAM-3 priority */
- taskattr:3; /* scsi task attribute */
-#else
- u8 taskattr:3, /* scsi task attribute */
- priority:4, /* FCP-3: SAM-3 priority */
- resvd:1;
-#endif
- u8 tm_flags; /* task management flags */
-#ifdef __BIGENDIAN
- u8 addl_cdb_len:6, /* additional CDB length words */
- iodir:2; /* read/write FCP_DATA IUs */
-#else
- u8 iodir:2, /* read/write FCP_DATA IUs */
- addl_cdb_len:6; /* additional CDB length */
-#endif
- struct scsi_cdb_s cdb;
-
- /*
- * !!! additional cdb bytes follows here!!!
- */
- u32 fcp_dl; /* bytes to be transferred */
-};
-
-#define fcp_cmnd_cdb_len(_cmnd) ((_cmnd)->addl_cdb_len * 4 + FCP_CMND_CDB_LEN)
-#define fcp_cmnd_fcpdl(_cmnd) ((&(_cmnd)->fcp_dl)[(_cmnd)->addl_cdb_len])
-
-/*
- * fcp_cmnd_t.iodir field values
- */
-enum fcp_iodir{
- FCP_IODIR_NONE = 0,
- FCP_IODIR_WRITE = 1,
- FCP_IODIR_READ = 2,
- FCP_IODIR_RW = 3,
-};
-
-/*
- * Task attribute field
- */
-enum {
- FCP_TASK_ATTR_SIMPLE = 0,
- FCP_TASK_ATTR_HOQ = 1,
- FCP_TASK_ATTR_ORDERED = 2,
- FCP_TASK_ATTR_ACA = 4,
- FCP_TASK_ATTR_UNTAGGED = 5, /* obsolete in FCP-3 */
-};
-
-/*
- * Task management flags field - only one bit shall be set
- */
-enum fcp_tm_cmnd{
- FCP_TM_ABORT_TASK_SET = BIT(1),
- FCP_TM_CLEAR_TASK_SET = BIT(2),
- FCP_TM_LUN_RESET = BIT(4),
- FCP_TM_TARGET_RESET = BIT(5), /* obsolete in FCP-3 */
- FCP_TM_CLEAR_ACA = BIT(6),
-};
-
-/*
- * FCP_XFER_RDY IU defines
- */
-struct fcp_xfer_rdy_s{
- u32 data_ro;
- u32 burst_len;
- u32 reserved;
-};
-
-/*
- * FCP_RSP residue flags
- */
-enum fcp_residue{
- FCP_NO_RESIDUE = 0, /* no residue */
- FCP_RESID_OVER = 1, /* more data left that was not sent */
- FCP_RESID_UNDER = 2, /* less data than requested */
-};
-
-enum {
- FCP_RSPINFO_GOOD = 0,
- FCP_RSPINFO_DATALEN_MISMATCH = 1,
- FCP_RSPINFO_CMND_INVALID = 2,
- FCP_RSPINFO_ROLEN_MISMATCH = 3,
- FCP_RSPINFO_TM_NOT_SUPP = 4,
- FCP_RSPINFO_TM_FAILED = 5,
-};
-
-struct fcp_rspinfo_s{
- u32 res0:24;
- u32 rsp_code:8; /* response code (as above) */
- u32 res1;
-};
-
-struct fcp_resp_s{
- u32 reserved[2]; /* 2 words reserved */
- u16 reserved2;
-#ifdef __BIGENDIAN
- u8 reserved3:3;
- u8 fcp_conf_req:1; /* FCP_CONF is requested */
- u8 resid_flags:2; /* underflow/overflow */
- u8 sns_len_valid:1;/* sense len is valid */
- u8 rsp_len_valid:1;/* response len is valid */
-#else
- u8 rsp_len_valid:1;/* response len is valid */
- u8 sns_len_valid:1;/* sense len is valid */
- u8 resid_flags:2; /* underflow/overflow */
- u8 fcp_conf_req:1; /* FCP_CONF is requested */
- u8 reserved3:3;
-#endif
- u8 scsi_status; /* one byte SCSI status */
- u32 residue; /* residual data bytes */
- u32 sns_len; /* length od sense info */
- u32 rsp_len; /* length of response info */
-};
-
-#define fcp_snslen(__fcprsp) ((__fcprsp)->sns_len_valid ? \
- (__fcprsp)->sns_len : 0)
-#define fcp_rsplen(__fcprsp) ((__fcprsp)->rsp_len_valid ? \
- (__fcprsp)->rsp_len : 0)
-#define fcp_rspinfo(__fcprsp) ((struct fcp_rspinfo_s *)((__fcprsp) + 1))
-#define fcp_snsinfo(__fcprsp) (((u8 *)fcp_rspinfo(__fcprsp)) + \
- fcp_rsplen(__fcprsp))
-
-struct fcp_cmnd_fr_s{
- struct fchs_s fchs;
- struct fcp_cmnd_s fcp;
-};
-
-#pragma pack()
-
-#endif
diff --git a/drivers/scsi/bfa/include/protocol/fdmi.h b/drivers/scsi/bfa/include/protocol/fdmi.h
deleted file mode 100644
index 6c05c26..0000000
--- a/drivers/scsi/bfa/include/protocol/fdmi.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __FDMI_H__
-#define __FDMI_H__
-
-#include <protocol/types.h>
-#include <protocol/fc.h>
-#include <protocol/ct.h>
-
-#pragma pack(1)
-
-/*
- * FDMI Command Codes
- */
-#define FDMI_GRHL 0x0100
-#define FDMI_GHAT 0x0101
-#define FDMI_GRPL 0x0102
-#define FDMI_GPAT 0x0110
-#define FDMI_RHBA 0x0200
-#define FDMI_RHAT 0x0201
-#define FDMI_RPRT 0x0210
-#define FDMI_RPA 0x0211
-#define FDMI_DHBA 0x0300
-#define FDMI_DPRT 0x0310
-
-/*
- * FDMI reason codes
- */
-#define FDMI_NO_ADDITIONAL_EXP 0x00
-#define FDMI_HBA_ALREADY_REG 0x10
-#define FDMI_HBA_ATTRIB_NOT_REG 0x11
-#define FDMI_HBA_ATTRIB_MULTIPLE 0x12
-#define FDMI_HBA_ATTRIB_LENGTH_INVALID 0x13
-#define FDMI_HBA_ATTRIB_NOT_PRESENT 0x14
-#define FDMI_PORT_ORIG_NOT_IN_LIST 0x15
-#define FDMI_PORT_HBA_NOT_IN_LIST 0x16
-#define FDMI_PORT_ATTRIB_NOT_REG 0x20
-#define FDMI_PORT_NOT_REG 0x21
-#define FDMI_PORT_ATTRIB_MULTIPLE 0x22
-#define FDMI_PORT_ATTRIB_LENGTH_INVALID 0x23
-#define FDMI_PORT_ALREADY_REGISTEREED 0x24
-
-/*
- * FDMI Transmission Speed Mask values
- */
-#define FDMI_TRANS_SPEED_1G 0x00000001
-#define FDMI_TRANS_SPEED_2G 0x00000002
-#define FDMI_TRANS_SPEED_10G 0x00000004
-#define FDMI_TRANS_SPEED_4G 0x00000008
-#define FDMI_TRANS_SPEED_8G 0x00000010
-#define FDMI_TRANS_SPEED_16G 0x00000020
-#define FDMI_TRANS_SPEED_UNKNOWN 0x00008000
-
-/*
- * FDMI HBA attribute types
- */
-enum fdmi_hba_attribute_type {
- FDMI_HBA_ATTRIB_NODENAME = 1, /* 0x0001 */
- FDMI_HBA_ATTRIB_MANUFACTURER, /* 0x0002 */
- FDMI_HBA_ATTRIB_SERIALNUM, /* 0x0003 */
- FDMI_HBA_ATTRIB_MODEL, /* 0x0004 */
- FDMI_HBA_ATTRIB_MODEL_DESC, /* 0x0005 */
- FDMI_HBA_ATTRIB_HW_VERSION, /* 0x0006 */
- FDMI_HBA_ATTRIB_DRIVER_VERSION, /* 0x0007 */
- FDMI_HBA_ATTRIB_ROM_VERSION, /* 0x0008 */
- FDMI_HBA_ATTRIB_FW_VERSION, /* 0x0009 */
- FDMI_HBA_ATTRIB_OS_NAME, /* 0x000A */
- FDMI_HBA_ATTRIB_MAX_CT, /* 0x000B */
-
- FDMI_HBA_ATTRIB_MAX_TYPE
-};
-
-/*
- * FDMI Port attribute types
- */
-enum fdmi_port_attribute_type {
- FDMI_PORT_ATTRIB_FC4_TYPES = 1, /* 0x0001 */
- FDMI_PORT_ATTRIB_SUPP_SPEED, /* 0x0002 */
- FDMI_PORT_ATTRIB_PORT_SPEED, /* 0x0003 */
- FDMI_PORT_ATTRIB_FRAME_SIZE, /* 0x0004 */
- FDMI_PORT_ATTRIB_DEV_NAME, /* 0x0005 */
- FDMI_PORT_ATTRIB_HOST_NAME, /* 0x0006 */
-
- FDMI_PORT_ATTR_MAX_TYPE
-};
-
-/*
- * FDMI attribute
- */
-struct fdmi_attr_s {
- u16 type;
- u16 len;
- u8 value[1];
-};
-
-/*
- * HBA Attribute Block
- */
-struct fdmi_hba_attr_s {
- u32 attr_count; /* # of attributes */
- struct fdmi_attr_s hba_attr; /* n attributes */
-};
-
-/*
- * Registered Port List
- */
-struct fdmi_port_list_s {
- u32 num_ports; /* number Of Port Entries */
- wwn_t port_entry; /* one or more */
-};
-
-/*
- * Port Attribute Block
- */
-struct fdmi_port_attr_s {
- u32 attr_count; /* # of attributes */
- struct fdmi_attr_s port_attr; /* n attributes */
-};
-
-/*
- * FDMI Register HBA Attributes
- */
-struct fdmi_rhba_s {
- wwn_t hba_id; /* HBA Identifier */
- struct fdmi_port_list_s port_list; /* Registered Port List */
- struct fdmi_hba_attr_s hba_attr_blk; /* HBA attribute block */
-};
-
-/*
- * FDMI Register Port
- */
-struct fdmi_rprt_s {
- wwn_t hba_id; /* HBA Identifier */
- wwn_t port_name; /* Port wwn */
- struct fdmi_port_attr_s port_attr_blk; /* Port Attr Block */
-};
-
-/*
- * FDMI Register Port Attributes
- */
-struct fdmi_rpa_s {
- wwn_t port_name; /* port wwn */
- struct fdmi_port_attr_s port_attr_blk; /* Port Attr Block */
-};
-
-#pragma pack()
-
-#endif
diff --git a/drivers/scsi/bfa/include/protocol/scsi.h b/drivers/scsi/bfa/include/protocol/scsi.h
deleted file mode 100644
index b220e6b..0000000
--- a/drivers/scsi/bfa/include/protocol/scsi.h
+++ /dev/null
@@ -1,1648 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __SCSI_H__
-#define __SCSI_H__
-
-#include <protocol/types.h>
-
-#pragma pack(1)
-
-/*
- * generic SCSI cdb definition
- */
-#define SCSI_MAX_CDBLEN 16
-struct scsi_cdb_s{
- u8 scsi_cdb[SCSI_MAX_CDBLEN];
-};
-
-/*
- * scsi lun serial number definition
- */
-#define SCSI_LUN_SN_LEN 32
-struct scsi_lun_sn_s{
- u8 lun_sn[SCSI_LUN_SN_LEN];
-};
-
-/*
- * SCSI Direct Access Commands
- */
-enum {
- SCSI_OP_TEST_UNIT_READY = 0x00,
- SCSI_OP_REQUEST_SENSE = 0x03,
- SCSI_OP_FORMAT_UNIT = 0x04,
- SCSI_OP_READ6 = 0x08,
- SCSI_OP_WRITE6 = 0x0A,
- SCSI_OP_WRITE_FILEMARKS = 0x10,
- SCSI_OP_INQUIRY = 0x12,
- SCSI_OP_MODE_SELECT6 = 0x15,
- SCSI_OP_RESERVE6 = 0x16,
- SCSI_OP_RELEASE6 = 0x17,
- SCSI_OP_MODE_SENSE6 = 0x1A,
- SCSI_OP_START_STOP_UNIT = 0x1B,
- SCSI_OP_SEND_DIAGNOSTIC = 0x1D,
- SCSI_OP_READ_CAPACITY = 0x25,
- SCSI_OP_READ10 = 0x28,
- SCSI_OP_WRITE10 = 0x2A,
- SCSI_OP_VERIFY10 = 0x2F,
- SCSI_OP_READ_DEFECT_DATA = 0x37,
- SCSI_OP_LOG_SELECT = 0x4C,
- SCSI_OP_LOG_SENSE = 0x4D,
- SCSI_OP_MODE_SELECT10 = 0x55,
- SCSI_OP_RESERVE10 = 0x56,
- SCSI_OP_RELEASE10 = 0x57,
- SCSI_OP_MODE_SENSE10 = 0x5A,
- SCSI_OP_PER_RESERVE_IN = 0x5E,
- SCSI_OP_PER_RESERVE_OUR = 0x5E,
- SCSI_OP_READ16 = 0x88,
- SCSI_OP_WRITE16 = 0x8A,
- SCSI_OP_VERIFY16 = 0x8F,
- SCSI_OP_READ_CAPACITY16 = 0x9E,
- SCSI_OP_REPORT_LUNS = 0xA0,
- SCSI_OP_READ12 = 0xA8,
- SCSI_OP_WRITE12 = 0xAA,
- SCSI_OP_UNDEF = 0xFF,
-};
-
-/*
- * SCSI START_STOP_UNIT command
- */
-struct scsi_start_stop_unit_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 lun:3;
- u8 reserved1:4;
- u8 immed:1;
-#else
- u8 immed:1;
- u8 reserved1:4;
- u8 lun:3;
-#endif
- u8 reserved2;
- u8 reserved3;
-#ifdef __BIGENDIAN
- u8 power_conditions:4;
- u8 reserved4:2;
- u8 loEj:1;
- u8 start:1;
-#else
- u8 start:1;
- u8 loEj:1;
- u8 reserved4:2;
- u8 power_conditions:4;
-#endif
- u8 control;
-};
-
-/*
- * SCSI SEND_DIAGNOSTIC command
- */
-struct scsi_send_diagnostic_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 self_test_code:3;
- u8 pf:1;
- u8 reserved1:1;
- u8 self_test:1;
- u8 dev_offl:1;
- u8 unit_offl:1;
-#else
- u8 unit_offl:1;
- u8 dev_offl:1;
- u8 self_test:1;
- u8 reserved1:1;
- u8 pf:1;
- u8 self_test_code:3;
-#endif
- u8 reserved2;
-
- u8 param_list_length[2]; /* MSB first */
- u8 control;
-
-};
-
-/*
- * SCSI READ10/WRITE10 commands
- */
-struct scsi_rw10_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 lun:3;
- u8 dpo:1; /* Disable Page Out */
- u8 fua:1; /* Force Unit Access */
- u8 reserved1:2;
- u8 rel_adr:1; /* relative address */
-#else
- u8 rel_adr:1;
- u8 reserved1:2;
- u8 fua:1;
- u8 dpo:1;
- u8 lun:3;
-#endif
- u8 lba0; /* logical block address - MSB */
- u8 lba1;
- u8 lba2;
- u8 lba3; /* LSB */
- u8 reserved3;
- u8 xfer_length0; /* transfer length in blocks - MSB */
- u8 xfer_length1; /* LSB */
- u8 control;
-};
-
-#define SCSI_CDB10_GET_LBA(cdb) \
- (((cdb)->lba0 << 24) | ((cdb)->lba1 << 16) | \
- ((cdb)->lba2 << 8) | (cdb)->lba3)
-
-#define SCSI_CDB10_SET_LBA(cdb, lba) { \
- (cdb)->lba0 = lba >> 24; \
- (cdb)->lba1 = (lba >> 16) & 0xFF; \
- (cdb)->lba2 = (lba >> 8) & 0xFF; \
- (cdb)->lba3 = lba & 0xFF; \
-}
-
-#define SCSI_CDB10_GET_TL(cdb) \
- ((cdb)->xfer_length0 << 8 | (cdb)->xfer_length1)
-#define SCSI_CDB10_SET_TL(cdb, tl) { \
- (cdb)->xfer_length0 = tl >> 8; \
- (cdb)->xfer_length1 = tl & 0xFF; \
-}
-
-/*
- * SCSI READ6/WRITE6 commands
- */
-struct scsi_rw6_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 lun:3;
- u8 lba0:5; /* MSb */
-#else
- u8 lba0:5; /* MSb */
- u8 lun:3;
-#endif
- u8 lba1;
- u8 lba2; /* LSB */
- u8 xfer_length;
- u8 control;
-};
-
-#define SCSI_TAPE_CDB6_GET_TL(cdb) \
- (((cdb)->tl0 << 16) | ((cdb)->tl1 << 8) | (cdb)->tl2)
-
-#define SCSI_TAPE_CDB6_SET_TL(cdb, tl) { \
- (cdb)->tl0 = tl >> 16; \
- (cdb)->tl1 = (tl >> 8) & 0xFF; \
- (cdb)->tl2 = tl & 0xFF; \
-}
-
-/*
- * SCSI sequential (TAPE) wrtie command
- */
-struct scsi_tape_wr_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 rsvd:7;
- u8 fixed:1; /* MSb */
-#else
- u8 fixed:1; /* MSb */
- u8 rsvd:7;
-#endif
- u8 tl0; /* Msb */
- u8 tl1;
- u8 tl2; /* Lsb */
-
- u8 control;
-};
-
-#define SCSI_CDB6_GET_LBA(cdb) \
- (((cdb)->lba0 << 16) | ((cdb)->lba1 << 8) | (cdb)->lba2)
-
-#define SCSI_CDB6_SET_LBA(cdb, lba) { \
- (cdb)->lba0 = lba >> 16; \
- (cdb)->lba1 = (lba >> 8) & 0xFF; \
- (cdb)->lba2 = lba & 0xFF; \
-}
-
-#define SCSI_CDB6_GET_TL(cdb) ((cdb)->xfer_length)
-#define SCSI_CDB6_SET_TL(cdb, tl) { \
- (cdb)->xfer_length = tl; \
-}
-
-/*
- * SCSI sense data format
- */
-struct scsi_sense_s{
-#ifdef __BIGENDIAN
- u8 valid:1;
- u8 rsp_code:7;
-#else
- u8 rsp_code:7;
- u8 valid:1;
-#endif
- u8 seg_num;
-#ifdef __BIGENDIAN
- u8 file_mark:1;
- u8 eom:1; /* end of media */
- u8 ili:1; /* incorrect length indicator */
- u8 reserved:1;
- u8 sense_key:4;
-#else
- u8 sense_key:4;
- u8 reserved:1;
- u8 ili:1; /* incorrect length indicator */
- u8 eom:1; /* end of media */
- u8 file_mark:1;
-#endif
- u8 information[4]; /* device-type or command specific info
- */
- u8 add_sense_length;
- /* additional sense length */
- u8 command_info[4];/* command specific information
- */
- u8 asc; /* additional sense code */
- u8 ascq; /* additional sense code qualifier */
- u8 fru_code; /* field replaceable unit code */
-#ifdef __BIGENDIAN
- u8 sksv:1; /* sense key specific valid */
- u8 c_d:1; /* command/data bit */
- u8 res1:2;
- u8 bpv:1; /* bit pointer valid */
- u8 bpointer:3; /* bit pointer */
-#else
- u8 bpointer:3; /* bit pointer */
- u8 bpv:1; /* bit pointer valid */
- u8 res1:2;
- u8 c_d:1; /* command/data bit */
- u8 sksv:1; /* sense key specific valid */
-#endif
- u8 fpointer[2]; /* field pointer */
-};
-
-#define SCSI_SENSE_CUR_ERR 0x70
-#define SCSI_SENSE_DEF_ERR 0x71
-
-/*
- * SCSI sense key values
- */
-#define SCSI_SK_NO_SENSE 0x0
-#define SCSI_SK_REC_ERR 0x1 /* recovered error */
-#define SCSI_SK_NOT_READY 0x2
-#define SCSI_SK_MED_ERR 0x3 /* medium error */
-#define SCSI_SK_HW_ERR 0x4 /* hardware error */
-#define SCSI_SK_ILLEGAL_REQ 0x5
-#define SCSI_SK_UNIT_ATT 0x6 /* unit attention */
-#define SCSI_SK_DATA_PROTECT 0x7
-#define SCSI_SK_BLANK_CHECK 0x8
-#define SCSI_SK_VENDOR_SPEC 0x9
-#define SCSI_SK_COPY_ABORTED 0xA
-#define SCSI_SK_ABORTED_CMND 0xB
-#define SCSI_SK_VOL_OVERFLOW 0xD
-#define SCSI_SK_MISCOMPARE 0xE
-
-/*
- * SCSI additional sense codes
- */
-#define SCSI_ASC_NO_ADD_SENSE 0x00
-#define SCSI_ASC_LUN_NOT_READY 0x04
-#define SCSI_ASC_LUN_COMMUNICATION 0x08
-#define SCSI_ASC_WRITE_ERROR 0x0C
-#define SCSI_ASC_INVALID_CMND_CODE 0x20
-#define SCSI_ASC_BAD_LBA 0x21
-#define SCSI_ASC_INVALID_FIELD_IN_CDB 0x24
-#define SCSI_ASC_LUN_NOT_SUPPORTED 0x25
-#define SCSI_ASC_LUN_WRITE_PROTECT 0x27
-#define SCSI_ASC_POWERON_BDR 0x29 /* power on reset, bus reset,
- * bus device reset
- */
-#define SCSI_ASC_PARAMS_CHANGED 0x2A
-#define SCSI_ASC_CMND_CLEARED_BY_A_I 0x2F
-#define SCSI_ASC_SAVING_PARAM_NOTSUPP 0x39
-#define SCSI_ASC_TOCC 0x3F /* target operating condtions
- * changed
- */
-#define SCSI_ASC_PARITY_ERROR 0x47
-#define SCSI_ASC_CMND_PHASE_ERROR 0x4A
-#define SCSI_ASC_DATA_PHASE_ERROR 0x4B
-#define SCSI_ASC_VENDOR_SPEC 0x7F
-
-/*
- * SCSI additional sense code qualifiers
- */
-#define SCSI_ASCQ_CAUSE_NOT_REPORT 0x00
-#define SCSI_ASCQ_BECOMING_READY 0x01
-#define SCSI_ASCQ_INIT_CMD_REQ 0x02
-#define SCSI_ASCQ_FORMAT_IN_PROGRESS 0x04
-#define SCSI_ASCQ_OPERATION_IN_PROGRESS 0x07
-#define SCSI_ASCQ_SELF_TEST_IN_PROGRESS 0x09
-#define SCSI_ASCQ_WR_UNEXP_UNSOL_DATA 0x0C
-#define SCSI_ASCQ_WR_NOTENG_UNSOL_DATA 0x0D
-
-#define SCSI_ASCQ_LBA_OUT_OF_RANGE 0x00
-#define SCSI_ASCQ_INVALID_ELEMENT_ADDR 0x01
-
-#define SCSI_ASCQ_LUN_WRITE_PROTECTED 0x00
-#define SCSI_ASCQ_LUN_HW_WRITE_PROTECTED 0x01
-#define SCSI_ASCQ_LUN_SW_WRITE_PROTECTED 0x02
-
-#define SCSI_ASCQ_POR 0x01 /* power on reset */
-#define SCSI_ASCQ_SBR 0x02 /* scsi bus reset */
-#define SCSI_ASCQ_BDR 0x03 /* bus device reset */
-#define SCSI_ASCQ_DIR 0x04 /* device internal reset */
-
-#define SCSI_ASCQ_MODE_PARAMS_CHANGED 0x01
-#define SCSI_ASCQ_LOG_PARAMS_CHANGED 0x02
-#define SCSI_ASCQ_RESERVATIONS_PREEMPTED 0x03
-#define SCSI_ASCQ_RESERVATIONS_RELEASED 0x04
-#define SCSI_ASCQ_REGISTRATIONS_PREEMPTED 0x05
-
-#define SCSI_ASCQ_MICROCODE_CHANGED 0x01
-#define SCSI_ASCQ_CHANGED_OPER_COND 0x02
-#define SCSI_ASCQ_INQ_CHANGED 0x03 /* inquiry data changed */
-#define SCSI_ASCQ_DI_CHANGED 0x05 /* device id changed */
-#define SCSI_ASCQ_RL_DATA_CHANGED 0x0E /* report luns data changed */
-
-#define SCSI_ASCQ_DP_CRC_ERR 0x01 /* data phase crc error */
-#define SCSI_ASCQ_DP_SCSI_PARITY_ERR 0x02 /* data phase scsi parity error
- */
-#define SCSI_ASCQ_IU_CRC_ERR 0x03 /* information unit crc error */
-#define SCSI_ASCQ_PROTO_SERV_CRC_ERR 0x05
-
-#define SCSI_ASCQ_LUN_TIME_OUT 0x01
-
-/* ------------------------------------------------------------
- * SCSI INQUIRY
- * ------------------------------------------------------------*/
-
-struct scsi_inquiry_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 lun:3;
- u8 reserved1:3;
- u8 cmd_dt:1;
- u8 evpd:1;
-#else
- u8 evpd:1;
- u8 cmd_dt:1;
- u8 reserved1:3;
- u8 lun:3;
-#endif
- u8 page_code;
- u8 reserved2;
- u8 alloc_length;
- u8 control;
-};
-
-struct scsi_inquiry_vendor_s{
- u8 vendor_id[8];
-};
-
-struct scsi_inquiry_prodid_s{
- u8 product_id[16];
-};
-
-struct scsi_inquiry_prodrev_s{
- u8 product_rev[4];
-};
-
-struct scsi_inquiry_data_s{
-#ifdef __BIGENDIAN
- u8 peripheral_qual:3; /* peripheral qualifier */
- u8 device_type:5; /* peripheral device type */
-
- u8 rmb:1; /* removable medium bit */
- u8 device_type_mod:7; /* device type modifier */
-
- u8 version;
-
- u8 aenc:1; /* async event notification capability
- */
- u8 trm_iop:1; /* terminate I/O process */
- u8 norm_aca:1; /* normal ACA supported */
- u8 hi_support:1; /* SCSI-3: supports REPORT LUNS */
- u8 rsp_data_format:4;
-
- u8 additional_len;
- u8 sccs:1;
- u8 reserved1:7;
-
- u8 reserved2:1;
- u8 enc_serv:1; /* enclosure service component */
- u8 reserved3:1;
- u8 multi_port:1; /* multi-port device */
- u8 m_chngr:1; /* device in medium transport element */
- u8 ack_req_q:1; /* SIP specific bit */
- u8 addr32:1; /* SIP specific bit */
- u8 addr16:1; /* SIP specific bit */
-
- u8 rel_adr:1; /* relative address */
- u8 w_bus32:1;
- u8 w_bus16:1;
- u8 synchronous:1;
- u8 linked_commands:1;
- u8 trans_dis:1;
- u8 cmd_queue:1; /* command queueing supported */
- u8 soft_reset:1; /* soft reset alternative (VS) */
-#else
- u8 device_type:5; /* peripheral device type */
- u8 peripheral_qual:3;
- /* peripheral qualifier */
-
- u8 device_type_mod:7;
- /* device type modifier */
- u8 rmb:1; /* removable medium bit */
-
- u8 version;
-
- u8 rsp_data_format:4;
- u8 hi_support:1; /* SCSI-3: supports REPORT LUNS */
- u8 norm_aca:1; /* normal ACA supported */
- u8 terminate_iop:1;/* terminate I/O process */
- u8 aenc:1; /* async event notification capability
- */
-
- u8 additional_len;
- u8 reserved1:7;
- u8 sccs:1;
-
- u8 addr16:1; /* SIP specific bit */
- u8 addr32:1; /* SIP specific bit */
- u8 ack_req_q:1; /* SIP specific bit */
- u8 m_chngr:1; /* device in medium transport element */
- u8 multi_port:1; /* multi-port device */
- u8 reserved3:1; /* TBD - Vendor Specific */
- u8 enc_serv:1; /* enclosure service component */
- u8 reserved2:1;
-
- u8 soft_seset:1; /* soft reset alternative (VS) */
- u8 cmd_queue:1; /* command queueing supported */
- u8 trans_dis:1;
- u8 linked_commands:1;
- u8 synchronous:1;
- u8 w_bus16:1;
- u8 w_bus32:1;
- u8 rel_adr:1; /* relative address */
-#endif
- struct scsi_inquiry_vendor_s vendor_id;
- struct scsi_inquiry_prodid_s product_id;
- struct scsi_inquiry_prodrev_s product_rev;
- u8 vendor_specific[20];
- u8 reserved4[40];
-};
-
-/*
- * inquiry.peripheral_qual field values
- */
-#define SCSI_DEVQUAL_DEFAULT 0
-#define SCSI_DEVQUAL_NOT_CONNECTED 1
-#define SCSI_DEVQUAL_NOT_SUPPORTED 3
-
-/*
- * inquiry.device_type field values
- */
-#define SCSI_DEVICE_DIRECT_ACCESS 0x00
-#define SCSI_DEVICE_SEQ_ACCESS 0x01
-#define SCSI_DEVICE_ARRAY_CONTROLLER 0x0C
-#define SCSI_DEVICE_UNKNOWN 0x1F
-
-/*
- * inquiry.version
- */
-#define SCSI_VERSION_ANSI_X3131 2 /* ANSI X3.131 SCSI-2 */
-#define SCSI_VERSION_SPC 3 /* SPC (SCSI-3), ANSI X3.301:1997 */
-#define SCSI_VERSION_SPC_2 4 /* SPC-2 */
-
-/*
- * response data format
- */
-#define SCSI_RSP_DATA_FORMAT 2 /* SCSI-2 & SPC */
-
-/*
- * SCSI inquiry page codes
- */
-#define SCSI_INQ_PAGE_VPD_PAGES 0x00 /* supported vpd pages */
-#define SCSI_INQ_PAGE_USN_PAGE 0x80 /* unit serial number page */
-#define SCSI_INQ_PAGE_DEV_IDENT 0x83 /* device indentification page
- */
-#define SCSI_INQ_PAGES_MAX 3
-
-/*
- * supported vital product data pages
- */
-struct scsi_inq_page_vpd_pages_s{
-#ifdef __BIGENDIAN
- u8 peripheral_qual:3;
- u8 device_type:5;
-#else
- u8 device_type:5;
- u8 peripheral_qual:3;
-#endif
- u8 page_code;
- u8 reserved;
- u8 page_length;
- u8 pages[SCSI_INQ_PAGES_MAX];
-};
-
-/*
- * Unit serial number page
- */
-#define SCSI_INQ_USN_LEN 32
-
-struct scsi_inq_usn_s{
- char usn[SCSI_INQ_USN_LEN];
-};
-
-struct scsi_inq_page_usn_s{
-#ifdef __BIGENDIAN
- u8 peripheral_qual:3;
- u8 device_type:5;
-#else
- u8 device_type:5;
- u8 peripheral_qual:3;
-#endif
- u8 page_code;
- u8 reserved1;
- u8 page_length;
- struct scsi_inq_usn_s usn;
-};
-
-enum {
- SCSI_INQ_DIP_CODE_BINARY = 1, /* identifier has binary value */
- SCSI_INQ_DIP_CODE_ASCII = 2, /* identifier has ascii value */
-};
-
-enum {
- SCSI_INQ_DIP_ASSOC_LUN = 0, /* id is associated with device */
- SCSI_INQ_DIP_ASSOC_PORT = 1, /* id is associated with port that
- * received the request
- */
-};
-
-enum {
- SCSI_INQ_ID_TYPE_VENDOR = 1,
- SCSI_INQ_ID_TYPE_IEEE = 2,
- SCSI_INQ_ID_TYPE_FC_FS = 3,
- SCSI_INQ_ID_TYPE_OTHER = 4,
-};
-
-struct scsi_inq_dip_desc_s{
-#ifdef __BIGENDIAN
- u8 res0:4;
- u8 code_set:4;
- u8 res1:2;
- u8 association:2;
- u8 id_type:4;
-#else
- u8 code_set:4;
- u8 res0:4;
- u8 id_type:4;
- u8 association:2;
- u8 res1:2;
-#endif
- u8 res2;
- u8 id_len;
- struct scsi_lun_sn_s id;
-};
-
-/*
- * Device indentification page
- */
-struct scsi_inq_page_dev_ident_s{
-#ifdef __BIGENDIAN
- u8 peripheral_qual:3;
- u8 device_type:5;
-#else
- u8 device_type:5;
- u8 peripheral_qual:3;
-#endif
- u8 page_code;
- u8 reserved1;
- u8 page_length;
- struct scsi_inq_dip_desc_s desc;
-};
-
-/* ------------------------------------------------------------
- * READ CAPACITY
- * ------------------------------------------------------------
- */
-
-struct scsi_read_capacity_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 lun:3;
- u8 reserved1:4;
- u8 rel_adr:1;
-#else
- u8 rel_adr:1;
- u8 reserved1:4;
- u8 lun:3;
-#endif
- u8 lba0; /* MSB */
- u8 lba1;
- u8 lba2;
- u8 lba3; /* LSB */
- u8 reserved2;
- u8 reserved3;
-#ifdef __BIGENDIAN
- u8 reserved4:7;
- u8 pmi:1; /* partial medium indicator */
-#else
- u8 pmi:1; /* partial medium indicator */
- u8 reserved4:7;
-#endif
- u8 control;
-};
-
-struct scsi_read_capacity_data_s{
- u32 max_lba; /* maximum LBA available */
- u32 block_length; /* in bytes */
-};
-
-struct scsi_read_capacity16_data_s{
- u64 lba; /* maximum LBA available */
- u32 block_length; /* in bytes */
-#ifdef __BIGENDIAN
- u8 reserved1:4,
- p_type:3,
- prot_en:1;
- u8 reserved2:4,
- lb_pbe:4; /* logical blocks per physical block
- * exponent */
- u16 reserved3:2,
- lba_align:14; /* lowest aligned logical block
- * address */
-#else
- u16 lba_align:14, /* lowest aligned logical block
- * address */
- reserved3:2;
- u8 lb_pbe:4, /* logical blocks per physical block
- * exponent */
- reserved2:4;
- u8 prot_en:1,
- p_type:3,
- reserved1:4;
-#endif
- u64 reserved4;
- u64 reserved5;
-};
-
-/* ------------------------------------------------------------
- * REPORT LUNS command
- * ------------------------------------------------------------
- */
-
-struct scsi_report_luns_s{
- u8 opcode; /* A0h - REPORT LUNS opCode */
- u8 reserved1[5];
- u8 alloc_length[4];/* allocation length MSB first */
- u8 reserved2;
- u8 control;
-};
-
-#define SCSI_REPORT_LUN_ALLOC_LENGTH(rl) \
- ((rl->alloc_length[0] << 24) | (rl->alloc_length[1] << 16) | \
- (rl->alloc_length[2] << 8) | (rl->alloc_length[3]))
-
-#define SCSI_REPORT_LUNS_SET_ALLOCLEN(rl, alloc_len) { \
- (rl)->alloc_length[0] = (alloc_len) >> 24; \
- (rl)->alloc_length[1] = ((alloc_len) >> 16) & 0xFF; \
- (rl)->alloc_length[2] = ((alloc_len) >> 8) & 0xFF; \
- (rl)->alloc_length[3] = (alloc_len) & 0xFF; \
-}
-
-struct scsi_report_luns_data_s{
- u32 lun_list_length; /* length of LUN list length */
- u32 reserved;
- lun_t lun[1]; /* first LUN in lun list */
-};
-
-/* -------------------------------------------------------------
- * SCSI mode parameters
- * -----------------------------------------------------------
- */
-enum {
- SCSI_DA_MEDIUM_DEF = 0, /* direct access default medium type */
- SCSI_DA_MEDIUM_SS = 1, /* direct access single sided */
- SCSI_DA_MEDIUM_DS = 2, /* direct access double sided */
-};
-
-/*
- * SCSI Mode Select(6) cdb
- */
-struct scsi_mode_select6_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 reserved1:3;
- u8 pf:1; /* page format */
- u8 reserved2:3;
- u8 sp:1; /* save pages if set to 1 */
-#else
- u8 sp:1; /* save pages if set to 1 */
- u8 reserved2:3;
- u8 pf:1; /* page format */
- u8 reserved1:3;
-#endif
- u8 reserved3[2];
- u8 alloc_len;
- u8 control;
-};
-
-/*
- * SCSI Mode Select(10) cdb
- */
-struct scsi_mode_select10_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 reserved1:3;
- u8 pf:1; /* page format */
- u8 reserved2:3;
- u8 sp:1; /* save pages if set to 1 */
-#else
- u8 sp:1; /* save pages if set to 1 */
- u8 reserved2:3;
- u8 pf:1; /* page format */
- u8 reserved1:3;
-#endif
- u8 reserved3[5];
- u8 alloc_len_msb;
- u8 alloc_len_lsb;
- u8 control;
-};
-
-/*
- * SCSI Mode Sense(6) cdb
- */
-struct scsi_mode_sense6_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 reserved1:4;
- u8 dbd:1; /* disable block discriptors if set to 1 */
- u8 reserved2:3;
-
- u8 pc:2; /* page control */
- u8 page_code:6;
-#else
- u8 reserved2:3;
- u8 dbd:1; /* disable block descriptors if set to 1 */
- u8 reserved1:4;
-
- u8 page_code:6;
- u8 pc:2; /* page control */
-#endif
- u8 reserved3;
- u8 alloc_len;
- u8 control;
-};
-
-/*
- * SCSI Mode Sense(10) cdb
- */
-struct scsi_mode_sense10_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 reserved1:3;
- u8 LLBAA:1; /* long LBA accepted if set to 1 */
- u8 dbd:1; /* disable block descriptors if set
- * to 1
- */
- u8 reserved2:3;
-
- u8 pc:2; /* page control */
- u8 page_code:6;
-#else
- u8 reserved2:3;
- u8 dbd:1; /* disable block descriptors if set to
- * 1
- */
- u8 LLBAA:1; /* long LBA accepted if set to 1 */
- u8 reserved1:3;
-
- u8 page_code:6;
- u8 pc:2; /* page control */
-#endif
- u8 reserved3[4];
- u8 alloc_len_msb;
- u8 alloc_len_lsb;
- u8 control;
-};
-
-#define SCSI_CDB10_GET_AL(cdb) \
- ((cdb)->alloc_len_msb << 8 | (cdb)->alloc_len_lsb)
-
-#define SCSI_CDB10_SET_AL(cdb, al) { \
- (cdb)->alloc_len_msb = al >> 8; \
- (cdb)->alloc_len_lsb = al & 0xFF; \
-}
-
-#define SCSI_CDB6_GET_AL(cdb) ((cdb)->alloc_len)
-
-#define SCSI_CDB6_SET_AL(cdb, al) { \
- (cdb)->alloc_len = al; \
-}
-
-/*
- * page control field values
- */
-#define SCSI_PC_CURRENT_VALUES 0x0
-#define SCSI_PC_CHANGEABLE_VALUES 0x1
-#define SCSI_PC_DEFAULT_VALUES 0x2
-#define SCSI_PC_SAVED_VALUES 0x3
-
-/*
- * SCSI mode page codes
- */
-#define SCSI_MP_VENDOR_SPEC 0x00
-#define SCSI_MP_DISC_RECN 0x02 /* disconnect-reconnect page */
-#define SCSI_MP_FORMAT_DEVICE 0x03
-#define SCSI_MP_RDG 0x04 /* rigid disk geometry page */
-#define SCSI_MP_FDP 0x05 /* flexible disk page */
-#define SCSI_MP_CACHING 0x08 /* caching page */
-#define SCSI_MP_CONTROL 0x0A /* control mode page */
-#define SCSI_MP_MED_TYPES_SUP 0x0B /* medium types supported page */
-#define SCSI_MP_INFO_EXCP_CNTL 0x1C /* informational exception control */
-#define SCSI_MP_ALL 0x3F /* return all pages - mode sense only */
-
-/*
- * mode parameter header
- */
-struct scsi_mode_param_header6_s{
- u8 mode_datalen;
- u8 medium_type;
-
- /*
- * device specific parameters expanded for direct access devices
- */
-#ifdef __BIGENDIAN
- u32 wp:1; /* write protected */
- u32 reserved1:2;
- u32 dpofua:1; /* disable page out + force unit access
- */
- u32 reserved2:4;
-#else
- u32 reserved2:4;
- u32 dpofua:1; /* disable page out + force unit access
- */
- u32 reserved1:2;
- u32 wp:1; /* write protected */
-#endif
-
- u8 block_desclen;
-};
-
-struct scsi_mode_param_header10_s{
- u32 mode_datalen:16;
- u32 medium_type:8;
-
- /*
- * device specific parameters expanded for direct access devices
- */
-#ifdef __BIGENDIAN
- u32 wp:1; /* write protected */
- u32 reserved1:2;
- u32 dpofua:1; /* disable page out + force unit access
- */
- u32 reserved2:4;
-#else
- u32 reserved2:4;
- u32 dpofua:1; /* disable page out + force unit access
- */
- u32 reserved1:2;
- u32 wp:1; /* write protected */
-#endif
-
-#ifdef __BIGENDIAN
- u32 reserved3:7;
- u32 longlba:1;
-#else
- u32 longlba:1;
- u32 reserved3:7;
-#endif
- u32 reserved4:8;
- u32 block_desclen:16;
-};
-
-/*
- * mode parameter block descriptor
- */
-struct scsi_mode_param_desc_s{
- u32 nblks;
- u32 density_code:8;
- u32 block_length:24;
-};
-
-/*
- * Disconnect-reconnect mode page format
- */
-struct scsi_mp_disc_recn_s{
-#ifdef __BIGENDIAN
- u8 ps:1;
- u8 reserved1:1;
- u8 page_code:6;
-#else
- u8 page_code:6;
- u8 reserved1:1;
- u8 ps:1;
-#endif
- u8 page_len;
- u8 buf_full_ratio;
- u8 buf_empty_ratio;
-
- u8 bil_msb; /* bus inactivity limit -MSB */
- u8 bil_lsb; /* bus inactivity limit -LSB */
-
- u8 dtl_msb; /* disconnect time limit - MSB */
- u8 dtl_lsb; /* disconnect time limit - LSB */
-
- u8 ctl_msb; /* connect time limit - MSB */
- u8 ctl_lsb; /* connect time limit - LSB */
-
- u8 max_burst_len_msb;
- u8 max_burst_len_lsb;
-#ifdef __BIGENDIAN
- u8 emdp:1; /* enable modify data pointers */
- u8 fa:3; /* fair arbitration */
- u8 dimm:1; /* disconnect immediate */
- u8 dtdc:3; /* data transfer disconnect control */
-#else
- u8 dtdc:3; /* data transfer disconnect control */
- u8 dimm:1; /* disconnect immediate */
- u8 fa:3; /* fair arbitration */
- u8 emdp:1; /* enable modify data pointers */
-#endif
-
- u8 reserved3;
-
- u8 first_burst_len_msb;
- u8 first_burst_len_lsb;
-};
-
-/*
- * SCSI format device mode page
- */
-struct scsi_mp_format_device_s{
-#ifdef __BIGENDIAN
- u32 ps:1;
- u32 reserved1:1;
- u32 page_code:6;
-#else
- u32 page_code:6;
- u32 reserved1:1;
- u32 ps:1;
-#endif
- u32 page_len:8;
- u32 tracks_per_zone:16;
-
- u32 a_sec_per_zone:16;
- u32 a_tracks_per_zone:16;
-
- u32 a_tracks_per_lun:16; /* alternate tracks/lun-MSB */
- u32 sec_per_track:16; /* sectors/track-MSB */
-
- u32 bytes_per_sector:16;
- u32 interleave:16;
-
- u32 tsf:16; /* track skew factor-MSB */
- u32 csf:16; /* cylinder skew factor-MSB */
-
-#ifdef __BIGENDIAN
- u32 ssec:1; /* soft sector formatting */
- u32 hsec:1; /* hard sector formatting */
- u32 rmb:1; /* removable media */
- u32 surf:1; /* surface */
- u32 reserved2:4;
-#else
- u32 reserved2:4;
- u32 surf:1; /* surface */
- u32 rmb:1; /* removable media */
- u32 hsec:1; /* hard sector formatting */
- u32 ssec:1; /* soft sector formatting */
-#endif
- u32 reserved3:24;
-};
-
-/*
- * SCSI rigid disk device geometry page
- */
-struct scsi_mp_rigid_device_geometry_s{
-#ifdef __BIGENDIAN
- u32 ps:1;
- u32 reserved1:1;
- u32 page_code:6;
-#else
- u32 page_code:6;
- u32 reserved1:1;
- u32 ps:1;
-#endif
- u32 page_len:8;
- u32 num_cylinders0:8;
- u32 num_cylinders1:8;
-
- u32 num_cylinders2:8;
- u32 num_heads:8;
- u32 scwp0:8;
- u32 scwp1:8;
-
- u32 scwp2:8;
- u32 scrwc0:8;
- u32 scrwc1:8;
- u32 scrwc2:8;
-
- u32 dsr:16;
- u32 lscyl0:8;
- u32 lscyl1:8;
-
- u32 lscyl2:8;
-#ifdef __BIGENDIAN
- u32 reserved2:6;
- u32 rpl:2; /* rotational position locking */
-#else
- u32 rpl:2; /* rotational position locking */
- u32 reserved2:6;
-#endif
- u32 rot_off:8;
- u32 reserved3:8;
-
- u32 med_rot_rate:16;
- u32 reserved4:16;
-};
-
-/*
- * SCSI caching mode page
- */
-struct scsi_mp_caching_s{
-#ifdef __BIGENDIAN
- u8 ps:1;
- u8 res1:1;
- u8 page_code:6;
-#else
- u8 page_code:6;
- u8 res1:1;
- u8 ps:1;
-#endif
- u8 page_len;
-#ifdef __BIGENDIAN
- u8 ic:1; /* initiator control */
- u8 abpf:1; /* abort pre-fetch */
- u8 cap:1; /* caching analysis permitted */
- u8 disc:1; /* discontinuity */
- u8 size:1; /* size enable */
- u8 wce:1; /* write cache enable */
- u8 mf:1; /* multiplication factor */
- u8 rcd:1; /* read cache disable */
-
- u8 drrp:4; /* demand read retention priority */
- u8 wrp:4; /* write retention priority */
-#else
- u8 rcd:1; /* read cache disable */
- u8 mf:1; /* multiplication factor */
- u8 wce:1; /* write cache enable */
- u8 size:1; /* size enable */
- u8 disc:1; /* discontinuity */
- u8 cap:1; /* caching analysis permitted */
- u8 abpf:1; /* abort pre-fetch */
- u8 ic:1; /* initiator control */
-
- u8 wrp:4; /* write retention priority */
- u8 drrp:4; /* demand read retention priority */
-#endif
- u8 dptl[2];/* disable pre-fetch transfer length */
- u8 min_prefetch[2];
- u8 max_prefetch[2];
- u8 max_prefetch_limit[2];
-#ifdef __BIGENDIAN
- u8 fsw:1; /* force sequential write */
- u8 lbcss:1;/* logical block cache segment size */
- u8 dra:1; /* disable read ahead */
- u8 vs:2; /* vendor specific */
- u8 res2:3;
-#else
- u8 res2:3;
- u8 vs:2; /* vendor specific */
- u8 dra:1; /* disable read ahead */
- u8 lbcss:1;/* logical block cache segment size */
- u8 fsw:1; /* force sequential write */
-#endif
- u8 num_cache_segs;
-
- u8 cache_seg_size[2];
- u8 res3;
- u8 non_cache_seg_size[3];
-};
-
-/*
- * SCSI control mode page
- */
-struct scsi_mp_control_page_s{
-#ifdef __BIGENDIAN
-u8 ps:1;
-u8 reserved1:1;
-u8 page_code:6;
-#else
-u8 page_code:6;
-u8 reserved1:1;
-u8 ps:1;
-#endif
- u8 page_len;
-#ifdef __BIGENDIAN
- u8 tst:3; /* task set type */
- u8 reserved3:3;
- u8 gltsd:1; /* global logging target save disable */
- u8 rlec:1; /* report log exception condition */
-
- u8 qalgo_mod:4; /* queue alogorithm modifier */
- u8 reserved4:1;
- u8 qerr:2; /* queue error management */
- u8 dque:1; /* disable queuing */
-
- u8 reserved5:1;
- u8 rac:1; /* report a check */
- u8 reserved6:2;
- u8 swp:1; /* software write protect */
- u8 raerp:1; /* ready AER permission */
- u8 uaaerp:1; /* unit attenstion AER permission */
- u8 eaerp:1; /* error AER permission */
-
- u8 reserved7:5;
- u8 autoload_mod:3;
-#else
- u8 rlec:1; /* report log exception condition */
- u8 gltsd:1; /* global logging target save disable */
- u8 reserved3:3;
- u8 tst:3; /* task set type */
-
- u8 dque:1; /* disable queuing */
- u8 qerr:2; /* queue error management */
- u8 reserved4:1;
- u8 qalgo_mod:4; /* queue alogorithm modifier */
-
- u8 eaerp:1; /* error AER permission */
- u8 uaaerp:1; /* unit attenstion AER permission */
- u8 raerp:1; /* ready AER permission */
- u8 swp:1; /* software write protect */
- u8 reserved6:2;
- u8 rac:1; /* report a check */
- u8 reserved5:1;
-
- u8 autoload_mod:3;
- u8 reserved7:5;
-#endif
- u8 rahp_msb; /* ready AER holdoff period - MSB */
- u8 rahp_lsb; /* ready AER holdoff period - LSB */
-
- u8 busy_timeout_period_msb;
- u8 busy_timeout_period_lsb;
-
- u8 ext_selftest_compl_time_msb;
- u8 ext_selftest_compl_time_lsb;
-};
-
-/*
- * SCSI medium types supported mode page
- */
-struct scsi_mp_medium_types_sup_s{
-#ifdef __BIGENDIAN
- u8 ps:1;
- u8 reserved1:1;
- u8 page_code:6;
-#else
- u8 page_code:6;
- u8 reserved1:1;
- u8 ps:1;
-#endif
- u8 page_len;
-
- u8 reserved3[2];
- u8 med_type1_sup; /* medium type one supported */
- u8 med_type2_sup; /* medium type two supported */
- u8 med_type3_sup; /* medium type three supported */
- u8 med_type4_sup; /* medium type four supported */
-};
-
-/*
- * SCSI informational exception control mode page
- */
-struct scsi_mp_info_excpt_cntl_s{
-#ifdef __BIGENDIAN
- u8 ps:1;
- u8 reserved1:1;
- u8 page_code:6;
-#else
- u8 page_code:6;
- u8 reserved1:1;
- u8 ps:1;
-#endif
- u8 page_len;
-#ifdef __BIGENDIAN
- u8 perf:1; /* performance */
- u8 reserved3:1;
- u8 ebf:1; /* enable background fucntion */
- u8 ewasc:1; /* enable warning */
- u8 dexcpt:1; /* disable exception control */
- u8 test:1; /* enable test device failure
- * notification
- */
- u8 reserved4:1;
- u8 log_error:1;
-
- u8 reserved5:4;
- u8 mrie:4; /* method of reporting info
- * exceptions
- */
-#else
- u8 log_error:1;
- u8 reserved4:1;
- u8 test:1; /* enable test device failure
- * notification
- */
- u8 dexcpt:1; /* disable exception control */
- u8 ewasc:1; /* enable warning */
- u8 ebf:1; /* enable background fucntion */
- u8 reserved3:1;
- u8 perf:1; /* performance */
-
- u8 mrie:4; /* method of reporting info
- * exceptions
- */
- u8 reserved5:4;
-#endif
- u8 interval_timer_msb;
- u8 interval_timer_lsb;
-
- u8 report_count_msb;
- u8 report_count_lsb;
-};
-
-/*
- * Methods of reporting informational exceptions
- */
-#define SCSI_MP_IEC_NO_REPORT 0x0 /* no reporting of exceptions */
-#define SCSI_MP_IEC_AER 0x1 /* async event reporting */
-#define SCSI_MP_IEC_UNIT_ATTN 0x2 /* generate unit attenstion */
-#define SCSI_MO_IEC_COND_REC_ERR 0x3 /* conditionally generate recovered
- * error
- */
-#define SCSI_MP_IEC_UNCOND_REC_ERR 0x4 /* unconditionally generate recovered
- * error
- */
-#define SCSI_MP_IEC_NO_SENSE 0x5 /* generate no sense */
-#define SCSI_MP_IEC_ON_REQUEST 0x6 /* only report exceptions on request */
-
-/*
- * SCSI flexible disk page
- */
-struct scsi_mp_flexible_disk_s{
-#ifdef __BIGENDIAN
- u8 ps:1;
- u8 reserved1:1;
- u8 page_code:6;
-#else
- u8 page_code:6;
- u8 reserved1:1;
- u8 ps:1;
-#endif
- u8 page_len;
-
- u8 transfer_rate_msb;
- u8 transfer_rate_lsb;
-
- u8 num_heads;
- u8 num_sectors;
-
- u8 bytes_per_sector_msb;
- u8 bytes_per_sector_lsb;
-
- u8 num_cylinders_msb;
- u8 num_cylinders_lsb;
-
- u8 sc_wpc_msb; /* starting cylinder-write
- * precompensation msb
- */
- u8 sc_wpc_lsb; /* starting cylinder-write
- * precompensation lsb
- */
- u8 sc_rwc_msb; /* starting cylinder-reduced write
- * current msb
- */
- u8 sc_rwc_lsb; /* starting cylinder-reduced write
- * current lsb
- */
-
- u8 dev_step_rate_msb;
- u8 dev_step_rate_lsb;
-
- u8 dev_step_pulse_width;
-
- u8 head_sd_msb; /* head settle delay msb */
- u8 head_sd_lsb; /* head settle delay lsb */
-
- u8 motor_on_delay;
- u8 motor_off_delay;
-#ifdef __BIGENDIAN
- u8 trdy:1; /* true ready bit */
- u8 ssn:1; /* start sector number bit */
- u8 mo:1; /* motor on bit */
- u8 reserved3:5;
-
- u8 reserved4:4;
- u8 spc:4; /* step pulse per cylinder */
-#else
- u8 reserved3:5;
- u8 mo:1; /* motor on bit */
- u8 ssn:1; /* start sector number bit */
- u8 trdy:1; /* true ready bit */
-
- u8 spc:4; /* step pulse per cylinder */
- u8 reserved4:4;
-#endif
- u8 write_comp;
- u8 head_load_delay;
- u8 head_unload_delay;
-#ifdef __BIGENDIAN
- u8 pin34:4; /* pin34 usage */
- u8 pin2:4; /* pin2 usage */
-
- u8 pin4:4; /* pin4 usage */
- u8 pin1:4; /* pin1 usage */
-#else
- u8 pin2:4; /* pin2 usage */
- u8 pin34:4; /* pin34 usage */
-
- u8 pin1:4; /* pin1 usage */
- u8 pin4:4; /* pin4 usage */
-#endif
- u8 med_rot_rate_msb;
- u8 med_rot_rate_lsb;
-
- u8 reserved5[2];
-};
-
-struct scsi_mode_page_format_data6_s{
- struct scsi_mode_param_header6_s mph; /* mode page header */
- struct scsi_mode_param_desc_s desc; /* block descriptor */
- struct scsi_mp_format_device_s format; /* format device data */
-};
-
-struct scsi_mode_page_format_data10_s{
- struct scsi_mode_param_header10_s mph; /* mode page header */
- struct scsi_mode_param_desc_s desc; /* block descriptor */
- struct scsi_mp_format_device_s format; /* format device data */
-};
-
-struct scsi_mode_page_rdg_data6_s{
- struct scsi_mode_param_header6_s mph; /* mode page header */
- struct scsi_mode_param_desc_s desc; /* block descriptor */
- struct scsi_mp_rigid_device_geometry_s rdg;
- /* rigid geometry data */
-};
-
-struct scsi_mode_page_rdg_data10_s{
- struct scsi_mode_param_header10_s mph; /* mode page header */
- struct scsi_mode_param_desc_s desc; /* block descriptor */
- struct scsi_mp_rigid_device_geometry_s rdg;
- /* rigid geometry data */
-};
-
-struct scsi_mode_page_cache6_s{
- struct scsi_mode_param_header6_s mph; /* mode page header */
- struct scsi_mode_param_desc_s desc; /* block descriptor */
- struct scsi_mp_caching_s cache; /* cache page data */
-};
-
-struct scsi_mode_page_cache10_s{
- struct scsi_mode_param_header10_s mph; /* mode page header */
- struct scsi_mode_param_desc_s desc; /* block descriptor */
- struct scsi_mp_caching_s cache; /* cache page data */
-};
-
-/* --------------------------------------------------------------
- * Format Unit command
- * ------------------------------------------------------------
- */
-
-/*
- * Format Unit CDB
- */
-struct scsi_format_unit_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 res1:3;
- u8 fmtdata:1; /* if set, data out phase has format
- * data
- */
- u8 cmplst:1; /* if set, defect list is complete */
- u8 def_list:3; /* format of defect descriptor is
- * fmtdata =1
- */
-#else
- u8 def_list:3; /* format of defect descriptor is
- * fmtdata = 1
- */
- u8 cmplst:1; /* if set, defect list is complete */
- u8 fmtdata:1; /* if set, data out phase has format
- * data
- */
- u8 res1:3;
-#endif
- u8 interleave_msb;
- u8 interleave_lsb;
- u8 vendor_spec;
- u8 control;
-};
-
-/*
- * h
- */
-struct scsi_reserve6_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 reserved:3;
- u8 obsolete:4;
- u8 extent:1;
-#else
- u8 extent:1;
- u8 obsolete:4;
- u8 reserved:3;
-#endif
- u8 reservation_id;
- u16 param_list_len;
- u8 control;
-};
-
-/*
- * h
- */
-struct scsi_release6_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 reserved1:3;
- u8 obsolete:4;
- u8 extent:1;
-#else
- u8 extent:1;
- u8 obsolete:4;
- u8 reserved1:3;
-#endif
- u8 reservation_id;
- u16 reserved2;
- u8 control;
-};
-
-/*
- * h
- */
-struct scsi_reserve10_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 reserved1:3;
- u8 third_party:1;
- u8 reserved2:2;
- u8 long_id:1;
- u8 extent:1;
-#else
- u8 extent:1;
- u8 long_id:1;
- u8 reserved2:2;
- u8 third_party:1;
- u8 reserved1:3;
-#endif
- u8 reservation_id;
- u8 third_pty_dev_id;
- u8 reserved3;
- u8 reserved4;
- u8 reserved5;
- u16 param_list_len;
- u8 control;
-};
-
-struct scsi_release10_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 reserved1:3;
- u8 third_party:1;
- u8 reserved2:2;
- u8 long_id:1;
- u8 extent:1;
-#else
- u8 extent:1;
- u8 long_id:1;
- u8 reserved2:2;
- u8 third_party:1;
- u8 reserved1:3;
-#endif
- u8 reservation_id;
- u8 third_pty_dev_id;
- u8 reserved3;
- u8 reserved4;
- u8 reserved5;
- u16 param_list_len;
- u8 control;
-};
-
-struct scsi_verify10_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 lun:3;
- u8 dpo:1;
- u8 reserved:2;
- u8 bytchk:1;
- u8 reladdr:1;
-#else
- u8 reladdr:1;
- u8 bytchk:1;
- u8 reserved:2;
- u8 dpo:1;
- u8 lun:3;
-#endif
- u8 lba0;
- u8 lba1;
- u8 lba2;
- u8 lba3;
- u8 reserved1;
- u8 verification_len0;
- u8 verification_len1;
- u8 control_byte;
-};
-
-struct scsi_request_sense_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 lun:3;
- u8 reserved:5;
-#else
- u8 reserved:5;
- u8 lun:3;
-#endif
- u8 reserved0;
- u8 reserved1;
- u8 alloc_len;
- u8 control_byte;
-};
-
-/* ------------------------------------------------------------
- * SCSI status byte values
- * ------------------------------------------------------------
- */
-#define SCSI_STATUS_GOOD 0x00
-#define SCSI_STATUS_CHECK_CONDITION 0x02
-#define SCSI_STATUS_CONDITION_MET 0x04
-#define SCSI_STATUS_BUSY 0x08
-#define SCSI_STATUS_INTERMEDIATE 0x10
-#define SCSI_STATUS_ICM 0x14 /* intermediate condition met */
-#define SCSI_STATUS_RESERVATION_CONFLICT 0x18
-#define SCSI_STATUS_COMMAND_TERMINATED 0x22
-#define SCSI_STATUS_QUEUE_FULL 0x28
-#define SCSI_STATUS_ACA_ACTIVE 0x30
-
-#define SCSI_MAX_ALLOC_LEN 0xFF /* maximum allocarion length
- * in CDBs
- */
-
-#define SCSI_OP_WRITE_VERIFY10 0x2E
-#define SCSI_OP_WRITE_VERIFY12 0xAE
-#define SCSI_OP_UNDEF 0xFF
-
-/*
- * SCSI WRITE-VERIFY(10) command
- */
-struct scsi_write_verify10_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 reserved1:3;
- u8 dpo:1; /* Disable Page Out */
- u8 reserved2:1;
- u8 ebp:1; /* erse by-pass */
- u8 bytchk:1; /* byte check */
- u8 rel_adr:1; /* relative address */
-#else
- u8 rel_adr:1; /* relative address */
- u8 bytchk:1; /* byte check */
- u8 ebp:1; /* erse by-pass */
- u8 reserved2:1;
- u8 dpo:1; /* Disable Page Out */
- u8 reserved1:3;
-#endif
- u8 lba0; /* logical block address - MSB */
- u8 lba1;
- u8 lba2;
- u8 lba3; /* LSB */
- u8 reserved3;
- u8 xfer_length0; /* transfer length in blocks - MSB */
- u8 xfer_length1; /* LSB */
- u8 control;
-};
-
-#pragma pack()
-
-#endif /* __SCSI_H__ */
diff --git a/drivers/scsi/bfa/include/protocol/types.h b/drivers/scsi/bfa/include/protocol/types.h
deleted file mode 100644
index 2875a6c..0000000
--- a/drivers/scsi/bfa/include/protocol/types.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/**
- * types.h Protocol defined base types
- */
-
-#ifndef __TYPES_H__
-#define __TYPES_H__
-
-#include <bfa_os_inc.h>
-
-#define wwn_t u64
-#define lun_t u64
-
-#define WWN_NULL (0)
-#define FC_SYMNAME_MAX 256 /* max name server symbolic name size */
-#define FC_ALPA_MAX 128
-
-#pragma pack(1)
-
-#define MAC_ADDRLEN (6)
-struct mac_s { u8 mac[MAC_ADDRLEN]; };
-#define mac_t struct mac_s
-
-#pragma pack()
-
-#endif
--
1.7.3.rc1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2010-09-16 18:36 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-09-16 18:35 [PATCH 1a/33] (resend) bfa:(Cleanup Patch) Remove the include subdir and flatten BFA kgudipat
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.