* [U-Boot] [PATCH 5/7] Add mipi display support for rk3399 && rk3288
2017-04-01 14:42 ` [U-Boot] [PATCH 5/7] Add mipi display support for rk3399 && rk3288 eric.gao at rock-chips.com
@ 2017-04-05 3:52 ` Jacob Chen
2017-04-06 3:44 ` Simon Glass
1 sibling, 0 replies; 19+ messages in thread
From: Jacob Chen @ 2017-04-05 3:52 UTC (permalink / raw)
To: u-boot
Hi eric,
2017-04-01 22:42 GMT+08:00 <eric.gao@rock-chips.com>:
> From: "eric.gao" <eric.gao@rock-chips.com>
>
> Signed-off-by: eric.gao <eric.gao@rock-chips.com>
> ---
>
> arch/arm/dts/rk3399-evb.dts | 33 ++
> arch/arm/dts/rk3399.dtsi | 72 +++++
> arch/arm/include/asm/arch-rockchip/cru_rk3399.h | 2 +-
> arch/arm/include/asm/arch-rockchip/mipi_rk3399.h | 203 +++++++++++++
> arch/arm/include/asm/arch-rockchip/vop_rk3288.h | 1 +
> configs/evb-rk3399_defconfig | 4 +
> drivers/video/Kconfig | 2 +
> drivers/video/rockchip/Kconfig | 44 +++
> drivers/video/rockchip/Makefile | 7 +-
> drivers/video/rockchip/panel.c | 81 +++++
> drivers/video/rockchip/rk_mipi.c | 371 +++++++++++++++++++++++
> drivers/video/rockchip/rk_vop.c | 12 +-
> 12 files changed, 827 insertions(+), 5 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-rockchip/mipi_rk3399.h
> create mode 100644 drivers/video/rockchip/Kconfig
> create mode 100644 drivers/video/rockchip/panel.c
> create mode 100644 drivers/video/rockchip/rk_mipi.c
>
> diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts
> index 7a889c7..abb00e8 100644
> --- a/arch/arm/dts/rk3399-evb.dts
> +++ b/arch/arm/dts/rk3399-evb.dts
> @@ -52,6 +52,10 @@
> gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
> };
>
> + panel:panel {
> + compatible = "BOE,TV080WUM";
> + status = "disabled";
> + };
> vccsys: vccsys {
> compatible = "regulator-fixed";
> regulator-name = "vccsys";
> @@ -218,6 +222,35 @@
> };
> };
>
> +&panel {
> + backlight_en = <&gpio1 13 GPIO_ACTIVE_HIGH>;
> + backlight_pwm = <&gpio4 18 GPIO_ACTIVE_HIGH>;
> + power-supply = <&vcc33_lcd>;
> + status = "okay";
> +};
> +
> +&mipi_dsi {
> + status = "okay";
> + display-timings {
> + timing0 {
> + bits-per-pixel = <24>;
> + clock-frequency = <160000000>;
> + hfront-porch = <120>;
> + hsync-len = <20>;
> + hback-porch = <21>;
> + hactive = <1200>;
> + vfront-porch = <21>;
> + vsync-len = <3>;
> + vback-porch = <18>;
> + vactive = <1920>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> + };
> +};
> +
Evb board can use different screens, so we'd better not hard-code the choice.
And, Please split dts changes to a separate patch.
> &pinctrl {
> pmic {
> pmic_int_l: pmic-int-l {
> diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi
> index 93e3bf4..c82e674 100644
> --- a/arch/arm/dts/rk3399.dtsi
> +++ b/arch/arm/dts/rk3399.dtsi
> @@ -667,6 +667,78 @@
> status = "disabled";
> };
>
> + vopl: vop at ff8f0000 {
> + u-boot,dm-pre-reloc;
> + compatible = "rockchip,rk3399-vop-lit";
> + reg = <0x0 0xff8f0000 0x0 0x3efc>;
> + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
> + clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
> + resets = <&cru SRST_A_VOP1>, <&cru SRST_H_VOP1>, <&cru SRST_D_VOP1>;
> + reset-names = "axi", "ahb", "dclk";
> + status = "okay";
> + vopl_out: port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + vopl_out_mipi: endpoint at 0 {
> + reg = <3>;
> + remote-endpoint = <&mipi_in_vopl>;
> + };
> + };
> + };
> +
> + vopb: vop at ff900000 {
> + u-boot,dm-pre-reloc;
> + compatible = "rockchip,rk3399-vop-big";
> + reg = <0x0 0xff900000 0x0 0x3efc>;
> + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
> + #clock-cells = <0>;
> + clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
> + resets = <&cru SRST_A_VOP0>, <&cru SRST_H_VOP0>, <&cru SRST_D_VOP0>;
> + reset-names = "axi", "ahb", "dclk";
> + /*power-domains = <&power RK3399_PD_VOPB>;*/
> + status = "okay";
> + vopb_out: port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + vopb_out_mipi: endpoint at 0 {
> + reg = <3>;
> + remote-endpoint = <&mipi_in_vopb>;
> + };
> + };
> + };
> +
> + mipi_dsi: mipi at ff960000 {
> + compatible = "rockchip,rk3399_mipi_dsi";
> + reg = <0x0 0xff960000 0x0 0x8000>;
> + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&cru SCLK_MIPIDPHY_REF>, <&cru PCLK_MIPI_DSI0>,
> + <&cru SCLK_DPHY_TX0_CFG>;
> + clock-names = "ref", "pclk", "phy_cfg";
> + rockchip,grf = <&grf>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> + mipi_in: port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + mipi_in_vopb: endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&vopb_out_mipi>;
> + };
> + mipi_in_vopl: endpoint at 1 {
> + reg = <1>;
> + remote-endpoint = <&vopl_out_mipi>;
> + };
> + };
> + };
> + };
> +
> pinctrl: pinctrl {
> u-boot,dm-pre-reloc;
> compatible = "rockchip,rk3399-pinctrl";
> diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3399.h b/arch/arm/include/asm/arch-rockchip/cru_rk3399.h
> index cf830d0..8aa08d4 100644
> --- a/arch/arm/include/asm/arch-rockchip/cru_rk3399.h
> +++ b/arch/arm/include/asm/arch-rockchip/cru_rk3399.h
> @@ -74,7 +74,7 @@ check_member(rk3399_cru, sdio1_con[1], 0x594);
> #define OSC_HZ (24*MHz)
> #define APLL_HZ (600*MHz)
> #define GPLL_HZ (594*MHz)
> -#define CPLL_HZ (384*MHz)
> +#define CPLL_HZ (594*MHz)
> #define PPLL_HZ (676*MHz)
>
> #define PMU_PCLK_HZ (48*MHz)
> diff --git a/arch/arm/include/asm/arch-rockchip/mipi_rk3399.h b/arch/arm/include/asm/arch-rockchip/mipi_rk3399.h
> new file mode 100644
> index 0000000..478cb21
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-rockchip/mipi_rk3399.h
> @@ -0,0 +1,203 @@
> +/*
> + * Copyright (C) 2017-2025 Fuzhou Rockchip Electronics Co., Ltd
> + * author: eric.gao at rock-chips.com
> + * create date: 2017-03-31
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef RK33_MIPI_DSI_H
> +#define RK33_MIPI_DSI_H
> +
> +#define GRF_BASE 0xFF770000
> +#define RK_GRF_CON20 0x06250
> +#define RK_GRF_CON22 0x06258
> +#define MHz 1000000
> +
> +#define MIPI_DSI_HOST0_BASE 0xff960000
> +#define MIPI_DSI_HOST1_BASE 0xff968000
> +
> +/*
> + * function bits definition
> + * register addr | bits | offest
> + */
> +#define DSI_HOST_BITS(addr, bits, bit_offset) \
> + ((addr<<16) | (bits<<8) | (bit_offset))
> +
> +/* DWC_DSI_VERSION_0X3133302A */
> +#define VERSION DSI_HOST_BITS(0X000, 32, 0)
> +#define SHUTDOWNZ DSI_HOST_BITS(0X004, 1, 0)
> +#define TO_CLK_DIVISION DSI_HOST_BITS(0X008, 8, 8)
> +#define TX_ESC_CLK_DIVISION DSI_HOST_BITS(0X008, 8, 0)
> +#define DPI_VCID DSI_HOST_BITS(0X00C, 2, 0)
> +#define EN18_LOOSELY DSI_HOST_BITS(0X010, 1, 8)
> +#define DPI_COLOR_CODING DSI_HOST_BITS(0X010, 4, 0)
> +#define COLORM_ACTIVE_LOW DSI_HOST_BITS(0X014, 1, 4)
> +#define SHUTD_ACTIVE_LOW DSI_HOST_BITS(0X014, 1, 3)
> +#define HSYNC_ACTIVE_LOW DSI_HOST_BITS(0X014, 1, 2)
> +#define VSYNC_ACTIVE_LOW DSI_HOST_BITS(0X014, 1, 1)
> +#define DATAEN_ACTIVE_LOW DSI_HOST_BITS(0X014, 1, 0)
> +#define OUTVACT_LPCMD_TIME DSI_HOST_BITS(0X018, 8, 16)
> +#define INVACT_LPCMD_TIME DSI_HOST_BITS(0X018, 8, 0)
> +#define CRC_RX_EN DSI_HOST_BITS(0X02C, 1, 4)
> +#define ECC_RX_EN DSI_HOST_BITS(0X02C, 1, 3)
> +#define BTA_EN DSI_HOST_BITS(0X02C, 1, 2)
> +#define EOTP_RX_EN DSI_HOST_BITS(0X02C, 1, 1)
> +#define EOTP_TX_EN DSI_HOST_BITS(0X02C, 1, 0)
> +#define GEN_VID_RX DSI_HOST_BITS(0X030, 2, 0)
> +#define CMD_VIDEO_MODE DSI_HOST_BITS(0X034, 1, 0)
> +#define VPG_ORIENTATION DSI_HOST_BITS(0X038, 1, 24)
> +#define VPG_MODE DSI_HOST_BITS(0X038, 1, 20)
> +#define VPG_EN DSI_HOST_BITS(0X038, 1, 16)
> +#define LP_CMD_EN DSI_HOST_BITS(0X038, 1, 15)
> +#define FRAME_BTA_ACK_EN DSI_HOST_BITS(0X038, 1, 14)
> +#define LP_HFP_EN DSI_HOST_BITS(0X038, 1, 13)
> +#define LP_HBP_EN DSI_HOST_BITS(0X038, 1, 12)
> +#define LP_VACT_EN DSI_HOST_BITS(0X038, 1, 11)
> +#define LP_VFP_EN DSI_HOST_BITS(0X038, 1, 10)
> +#define LP_VBP_EN DSI_HOST_BITS(0X038, 1, 9)
> +#define LP_VSA_EN DSI_HOST_BITS(0X038, 1, 8)
> +#define VID_MODE_TYPE DSI_HOST_BITS(0X038, 2, 0)
> +#define VID_PKT_SIZE DSI_HOST_BITS(0X03C, 14, 0)
> +#define NUM_CHUNKS DSI_HOST_BITS(0X040, 13, 0)
> +#define NULL_PKT_SIZE DSI_HOST_BITS(0X044, 13, 0)
> +#define VID_HSA_TIME DSI_HOST_BITS(0X048, 12, 0)
> +#define VID_HBP_TIME DSI_HOST_BITS(0X04C, 12, 0)
> +#define VID_HLINE_TIME DSI_HOST_BITS(0X050, 15, 0)
> +#define VID_VSA_LINES DSI_HOST_BITS(0X054, 10, 0)
> +#define VID_VBP_LINES DSI_HOST_BITS(0X058, 10, 0)
> +#define VID_VFP_LINES DSI_HOST_BITS(0X05C, 10, 0)
> +#define VID_ACTIVE_LINES DSI_HOST_BITS(0X060, 14, 0)
> +#define EDPI_CMD_SIZE DSI_HOST_BITS(0X064, 16, 0)
> +#define MAX_RD_PKT_SIZE DSI_HOST_BITS(0X068, 1, 24)
> +#define DCS_LW_TX DSI_HOST_BITS(0X068, 1, 19)
> +#define DCS_SR_0P_TX DSI_HOST_BITS(0X068, 1, 18)
> +#define DCS_SW_1P_TX DSI_HOST_BITS(0X068, 1, 17)
> +#define DCS_SW_0P_TX DSI_HOST_BITS(0X068, 1, 16)
> +#define GEN_LW_TX DSI_HOST_BITS(0X068, 1, 14)
> +#define GEN_SR_2P_TX DSI_HOST_BITS(0X068, 1, 13)
> +#define GEN_SR_1P_TX DSI_HOST_BITS(0X068, 1, 12)
> +#define GEN_SR_0P_TX DSI_HOST_BITS(0X068, 1, 11)
> +#define GEN_SW_2P_TX DSI_HOST_BITS(0X068, 1, 10)
> +#define GEN_SW_1P_TX DSI_HOST_BITS(0X068, 1, 9)
> +#define GEN_SW_0P_TX DSI_HOST_BITS(0X068, 1, 8)
> +#define ACK_RQST_EN DSI_HOST_BITS(0X068, 1, 1)
> +#define TEAR_FX_EN DSI_HOST_BITS(0X068, 1, 0)
> +#define GEN_WC_MSBYTE DSI_HOST_BITS(0X06C, 14, 16)
> +#define GEN_WC_LSBYTE DSI_HOST_BITS(0X06C, 8, 8)
> +#define GEN_VC DSI_HOST_BITS(0X06C, 2, 6)
> +#define GEN_DT DSI_HOST_BITS(0X06C, 6, 0)
> +#define GEN_PLD_DATA DSI_HOST_BITS(0X070, 32, 0)
> +#define GEN_RD_CMD_BUSY DSI_HOST_BITS(0X074, 1, 6)
> +#define GEN_PLD_R_FULL DSI_HOST_BITS(0X074, 1, 5)
> +#define GEN_PLD_R_EMPTY DSI_HOST_BITS(0X074, 1, 4)
> +#define GEN_PLD_W_FULL DSI_HOST_BITS(0X074, 1, 3)
> +#define GEN_PLD_W_EMPTY DSI_HOST_BITS(0X074, 1, 2)
> +#define GEN_CMD_FULL DSI_HOST_BITS(0X074, 1, 1)
> +#define GEN_CMD_EMPTY DSI_HOST_BITS(0X074, 1, 0)
> +#define HSTX_TO_CNT DSI_HOST_BITS(0X078, 16, 16)
> +#define LPRX_TO_CNT DSI_HOST_BITS(0X078, 16, 0)
> +#define HS_RD_TO_CNT DSI_HOST_BITS(0X07C, 16, 0)
> +#define LP_RD_TO_CNT DSI_HOST_BITS(0X080, 16, 0)
> +#define PRESP_TO_MODE DSI_HOST_BITS(0X084, 1, 24)
> +#define HS_WR_TO_CNT DSI_HOST_BITS(0X084, 16, 0)
> +#define LP_WR_TO_CNT DSI_HOST_BITS(0X088, 16, 0)
> +#define BTA_TO_CNT DSI_HOST_BITS(0X08C, 16, 0)
> +#define AUTO_CLKLANE_CTRL DSI_HOST_BITS(0X094, 1, 1)
> +#define PHY_TXREQUESTCLKHS DSI_HOST_BITS(0X094, 1, 0)
> +#define PHY_HS2LP_TIME_CLK_LANE DSI_HOST_BITS(0X098, 10, 16)
> +#define PHY_HS2HS_TIME_CLK_LANE DSI_HOST_BITS(0X098, 10, 0)
> +#define PHY_HS2LP_TIME DSI_HOST_BITS(0X09C, 8, 24)
> +#define PHY_LP2HS_TIME DSI_HOST_BITS(0X09C, 8, 16)
> +#define MAX_RD_TIME DSI_HOST_BITS(0X09C, 15, 0)
> +#define PHY_FORCEPLL DSI_HOST_BITS(0X0A0, 1, 3)
> +#define PHY_ENABLECLK DSI_HOST_BITS(0X0A0, 1, 2)
> +#define PHY_RSTZ DSI_HOST_BITS(0X0A0, 1, 1)
> +#define PHY_SHUTDOWNZ DSI_HOST_BITS(0X0A0, 1, 0)
> +#define PHY_STOP_WAIT_TIME DSI_HOST_BITS(0X0A4, 8, 8)
> +#define N_LANES DSI_HOST_BITS(0X0A4, 2, 0)
> +#define PHY_TXEXITULPSLAN DSI_HOST_BITS(0X0A8, 1, 3)
> +#define PHY_TXREQULPSLAN DSI_HOST_BITS(0X0A8, 1, 2)
> +#define PHY_TXEXITULPSCLK DSI_HOST_BITS(0X0A8, 1, 1)
> +#define PHY_TXREQULPSCLK DSI_HOST_BITS(0X0A8, 1, 0)
> +#define PHY_TX_TRIGGERS DSI_HOST_BITS(0X0AC, 4, 0)
> +#define PHYSTOPSTATECLKLANE DSI_HOST_BITS(0X0B0, 1, 2)
> +#define PHYLOCK DSI_HOST_BITS(0X0B0, 1, 0)
> +#define PHY_TESTCLK DSI_HOST_BITS(0X0B4, 1, 1)
> +#define PHY_TESTCLR DSI_HOST_BITS(0X0B4, 1, 0)
> +#define PHY_TESTEN DSI_HOST_BITS(0X0B8, 1, 16)
> +#define PHY_TESTDOUT DSI_HOST_BITS(0X0B8, 8, 8)
> +#define PHY_TESTDIN DSI_HOST_BITS(0X0B8, 8, 0)
> +#define PHY_TEST_CTRL1 DSI_HOST_BITS(0X0B8, 17, 0)
> +#define PHY_TEST_CTRL0 DSI_HOST_BITS(0X0B4, 2, 0)
> +#define INT_ST0 DSI_HOST_BITS(0X0BC, 21, 0)
> +#define INT_ST1 DSI_HOST_BITS(0X0C0, 18, 0)
> +#define INT_MKS0 DSI_HOST_BITS(0X0C4, 21, 0)
> +#define INT_MKS1 DSI_HOST_BITS(0X0C8, 18, 0)
> +#define INT_FORCE0 DSI_HOST_BITS(0X0D8, 21, 0)
> +#define INT_FORCE1 DSI_HOST_BITS(0X0DC, 18, 0)
> +
> +#define code_hs_rx_clock 0x34
> +#define code_hs_rx_lane0 0x44
> +#define code_hs_rx_lane1 0x54
> +#define code_hs_rx_lane2 0x84
> +#define code_hs_rx_lane3 0x94
> +
> +#define code_pll_input_div_rat 0x17
> +#define code_pll_loop_div_rat 0x18
> +#define code_pll_vcorange_vcocap 0x10
> +#define code_pll_input_loop_div_rat 0x19
> +#define code_pll_cpctrl 0x11
> +
> +#define code_hstxdatalanerequsetstatetime 0x70
> +#define code_hstxdatalanepreparestatetime 0x71
> +#define code_hstxdatalanehszerostatetime 0x72
> +
> +enum vid_mode_type_enum {
> + NON_BURST_SYNC_PLUSE = 0,
> + NON_BURST_SYNC_EVENT,
> + BURST_MODE,
> +};
> +
> +enum cmd_video_mode {
> + VIDEO_MODE = 0,
> + CMD_MODE,
> +};
> +
> +enum dpi_color_coding {
> + DPI_16BIT_CFG_1 = 0,
> + DPI_16BIT_CFG_2,
> + DPI_16BIT_CFG_3,
> + DPI_18BIT_CFG_1,
> + DPI_18BIT_CFG_2,
> + DPI_24BIT,
> + DPI_20BIT_YCBCR_422_LP,
> + DPI_24BIT_YCBCR_422,
> + DPI_16BIT_YCBCR_422,
> + DPI_30BIT,
> + DPI_36BIT,
> + DPI_12BIT_YCBCR_420,
> +};
> +
> +enum vop_id {
> + VOP_B = 0,
> + VOP_L,
> +};
> +
> +/*
> + * Name :rk_write_reg(reg,val)
> + *
> + * reg: register name from the above define file,it contain the addr,
> + * bits number and bits offset
> + * val: reg value that will be writen to register, it can't be over
> + * the real bit num limit, For example, TO_CLK_DIVISION have 8
> + * bits space, so it's value can't great than 255
> + */
> +#define GET_VAL(reg, val) ((val & (~(0xffffffff << ((reg & 0xffff) >> 8)))) \
> + << (reg&0xff)) | ((readl((reg >> 16)+MIPI_DSI_HOST0_BASE)) & \
> + (~((0xffffffff<<(reg&0xff))&(0xffffffff>>\
> + (32-(reg&0xff)-((reg>>8)&0xff))))))
> +#define GET_ADDR(reg) (reg >> 16)+MIPI_DSI_HOST0_BASE
> +#define rk_write_reg(reg, val) writel(GET_VAL(reg, val), GET_ADDR(reg));
> +
> +#endif /* end of RK33_MIPI_DSI_H */
> diff --git a/arch/arm/include/asm/arch-rockchip/vop_rk3288.h b/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
> index 0ce3d67..d5599ec 100644
> --- a/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
> +++ b/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
> @@ -90,6 +90,7 @@ enum vop_modes {
> VOP_MODE_EDP = 0,
> VOP_MODE_HDMI,
> VOP_MODE_LVDS,
> + VOP_MODE_MIPI,
> VOP_MODE_NONE,
> VOP_MODE_AUTO_DETECT,
> VOP_MODE_UNKNOWN,
> diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
> index aac6d2d..b9cb0e8 100644
> --- a/configs/evb-rk3399_defconfig
> +++ b/configs/evb-rk3399_defconfig
> @@ -64,3 +64,7 @@ CONFIG_PMIC_CHILDREN=y
> CONFIG_SPL_PMIC_CHILDREN=y
> CONFIG_PMIC_RK808=y
> CONFIG_REGULATOR_RK808=y
> +CONFIG_DM_VIDEO=y
> +CONFIG_DISPLAY=y
> +CONFIG_VIDEO_ROCKCHIP=y
> +CONFIG_DISPLAY_MIPI=y
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index 2069576..4b03a9a 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -405,6 +405,8 @@ config VIDEO_ROCKCHIP
> (DSI). This driver supports the on-chip video output device, and
> targets the Rockchip RK3288.
>
> +source "drivers/video/rockchip/Kconfig"
> +
> config VIDEO_SANDBOX_SDL
> bool "Enable sandbox video console using SDL"
> depends on SANDBOX
> diff --git a/drivers/video/rockchip/Kconfig b/drivers/video/rockchip/Kconfig
> new file mode 100644
> index 0000000..72473f6
> --- /dev/null
> +++ b/drivers/video/rockchip/Kconfig
> @@ -0,0 +1,44 @@
> +#
> +# video drivers configuration
> +# for rockchip soc
> +#
> +
> +menu "Video Display Port Select"
> +
> +config DISPLAY_MIPI
> + bool "MIPI Port"
> + depends on VIDEO_ROCKCHIP
> + help
> + Select MIPI dsi for video port.
> + if you want to enable these function,you need
> + to turn on the DM_VIDEO,VDEIO_ROCKCHIP together
> + what is more,you shoud also enable the related
> + power,such as lcd3v3, lcd1v8,lcd1v0 and so on.
> +config DISPLAY_EDP
> + bool "EDP Port"
> + depends on VIDEO_ROCKCHIP
> + help
> + Select EDP for video port.
> + if you want to enable these function,you need
> + to turn on the DM_VIDEO,VDEIO_ROCKCHIP together
> + what is more,you shoud also enable the related
> + power,such as lcd3v3, lcd1v8,lcd1v0 and so on.
> +config DISPLAY_LVDS
> + bool "LVDS Port"
> + depends on VIDEO_ROCKCHIP
> + help
> + Select LVDS for video port.
> + if you want to enable these function,you need
> + to turn on the DM_VIDEO,VDEIO_ROCKCHIP together
> + what is more,you shoud also enable the related
> + power,such as lcd3v3, lcd1v8,lcd1v0 and so on.
> +config DISPLAY_HDMI
> + bool "HDMI port"
> + depends on VIDEO_ROCKCHIP
> + help
> + Select HDMI for video port
> + if you want to enable these function,you need
> + to turn on the DM_VIDEO,VDEIO_ROCKCHIP together
> + what is more,you shoud also enable the related
> + power,such as lcd3v3, lcd1v8,lcd1v0 and so on.
> +endmenu
> diff --git a/drivers/video/rockchip/Makefile b/drivers/video/rockchip/Makefile
> index 7962f86..98b26ea 100644
> --- a/drivers/video/rockchip/Makefile
> +++ b/drivers/video/rockchip/Makefile
> @@ -5,4 +5,9 @@
> # SPDX-License-Identifier: GPL-2.0+
> #
>
> -obj-y += rk_edp.o rk_hdmi.o rk_vop.o rk_lvds.o
> +obj-$(CONFIG_VIDEO_ROCKCHIP) += rk_vop.o
> +obj-$(CONFIG_VIDEO_ROCKCHIP) += panel.o
> +obj-$(CONFIG_DISPLAY_MIPI) += rk_mipi.o
> +obj-$(CONFIG_DISPLAY_EDP) += rk_edp.o
> +obj-$(CONFIG_DISPLAY_LVDS) += rk_lvds.o
> +obj-$(CONFIG_DISPLAY_HDMI) += rk_hdmi.o
> diff --git a/drivers/video/rockchip/panel.c b/drivers/video/rockchip/panel.c
> new file mode 100644
> index 0000000..8b02b0f
> --- /dev/null
> +++ b/drivers/video/rockchip/panel.c
> @@ -0,0 +1,81 @@
> +/*
> + * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <common.h>
> +#include <clk.h>
> +#include <display.h>
> +#include <dm.h>
> +#include <edid.h>
> +#include <panel.h>
> +#include <asm/hardware.h>
> +#include <regmap.h>
> +#include <syscon.h>
> +#include <asm/gpio.h>
> +#include <asm/io.h>
> +#include <asm/arch/mipi_rk3399.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/grf_rk3288.h>
> +#include <dt-bindings/clock/rk3288-cru.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +static int bind(struct udevice *dev)
> +{
> + debug("Panel bind@%s_Line:%d\n", __func__, __LINE__);
> + return 0;
> +}
> +
> +static int probe(struct udevice *dev)
> +{
> + debug("Panel probe@%s_Line:%d\n", __func__, __LINE__);
> + return 0;
> +}
> +
> +int rk_panel_enable_backlight(struct udevice *dev)
> +{
> + struct gpio_desc bg_en, bg_pwm;
> + int node;
> +
> + node = fdt_node_offset_by_compatible(gd->fdt_blob, 0, "BOE,TV080WUM");
> + if (node < 0) {
> + debug("Can't find node@%s_Line:%d\n", __func__, __LINE__);
> + return -EINVAL;
> + }
> + gpio_request_by_name_nodev(gd->fdt_blob, node, "backlight_en",
> + 0, &bg_en, GPIOD_IS_OUT);
> + gpio_request_by_name_nodev(gd->fdt_blob, node,
> + "backlight_pwm", 0, &bg_pwm, GPIOD_IS_OUT);
> + if (dm_gpio_is_valid(&bg_en)) {
> + dm_gpio_set_value(&bg_en, 1);
> + dm_gpio_set_value(&bg_pwm, 1);
> + } else {
> + debug("GPIO Invalid@%s_Line:%d\n", __func__, __LINE__);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static const struct panel_ops rk_panel_ops = {
> + .enable_backlight = rk_panel_enable_backlight,
> +};
> +
> +static const struct udevice_id rk_panel_ids[] = {
> + { .compatible = "BOE,TV080WUM" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(rk_panel) = {
> + .name = "rk_panel",
> + .id = UCLASS_PANEL,
> + .of_match = rk_panel_ids,
> + .bind = bind,
> + .probe = probe,
> + .ops = &rk_panel_ops,
> +};
Why not use simple_panel?
> diff --git a/drivers/video/rockchip/rk_mipi.c b/drivers/video/rockchip/rk_mipi.c
> new file mode 100644
> index 0000000..84cfb96
> --- /dev/null
> +++ b/drivers/video/rockchip/rk_mipi.c
> @@ -0,0 +1,371 @@
> +/*
> + * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <common.h>
> +#include <clk.h>
> +#include <display.h>
> +#include <dm.h>
> +#include <fdtdec.h>
> +#include <panel.h>
> +#include <asm/hardware.h>
> +#include <regmap.h>
> +#include <syscon.h>
> +#include <asm/gpio.h>
> +#include <asm/io.h>
> +#include <asm/arch/mipi_rk3399.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/grf_rk3288.h>
> +#include <dt-bindings/clock/rk3288-cru.h>
> +#include <dm/uclass-internal.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +struct mipi_dsi {
> + u32 ref_clk;
> + u32 sys_clk;
> + u32 pix_clk;
> + u32 phy_clk;
> + u32 txbyte_clk;
> + u32 txesc_clk;
> +};
> +
> +int rk_mipi_read_timing(struct udevice *dev, struct display_timing *timing)
> +{
> + if (fdtdec_decode_display_timing
> + (gd->fdt_blob, dev_of_offset(dev), 0, timing)) {
> + debug("%s: Failed to decode display timing\n", __func__);
> + return -EINVAL;
> + }
> + return 0;
> +}
> +
> +int rk_mipi_dsi_enable(struct udevice *dev, struct mipi_dsi *mipi,
> + const struct display_timing *timing)
> +{
> + int node, timing_node;
> + int val;
> + struct display_plat *disp_uc_plat = dev_get_uclass_platdata(dev);
> + u32 txbyte_clk = mipi->txbyte_clk;
> + u32 txesc_clk = mipi->txesc_clk;
> +
> + txesc_clk = txbyte_clk/(txbyte_clk/txesc_clk + 1);
> +
> + /* Select the video source */
> + switch (disp_uc_plat->source_id) {
> + case VOP_B:
> + val = 0x1 << 16 | 0x0;
> + writel(val, GRF_BASE+RK_GRF_CON20);
> + break;
> + case VOP_L:
> + val = 0x1 << 16 | 0x1;
> + writel(val, GRF_BASE+RK_GRF_CON20);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + /* Set Controller as TX mode */
> + val = 0x1 << 28 | 0x0 << 12;
> + val |= 0xf << 20 | 0x0 << 4;
> + val |= 0xf << 16 | 0x0;
> + writel(val, GRF_BASE+RK_GRF_CON22);
> +
> + /* Set Display timing parameter */
> + rk_write_reg(VID_HSA_TIME, timing->hsync_len.typ);
> + rk_write_reg(VID_HBP_TIME, timing->hback_porch.typ);
> + rk_write_reg(VID_HLINE_TIME,
> + (timing->hsync_len.typ +
> + timing->hback_porch.typ +
> + timing->hactive.typ +
> + timing->hfront_porch.typ));
> + rk_write_reg(VID_VSA_LINES, timing->vsync_len.typ);
> + rk_write_reg(VID_VBP_LINES, timing->vback_porch.typ);
> + rk_write_reg(VID_VFP_LINES, timing->vfront_porch.typ);
> + rk_write_reg(VID_ACTIVE_LINES, timing->vactive.typ);
> +
> + /* Set Signal Polarity */
> + val = (timing->flags & DISPLAY_FLAGS_HSYNC_LOW) ? 1 : 0;
> + rk_write_reg(HSYNC_ACTIVE_LOW, val);
> +
> + val = (timing->flags & DISPLAY_FLAGS_VSYNC_LOW) ? 1 : 0;
> + rk_write_reg(VSYNC_ACTIVE_LOW, val);
> +
> + val = (timing->flags & DISPLAY_FLAGS_DE_LOW) ? 1 : 0;
> + rk_write_reg(DISPLAY_FLAGS_DE_LOW, val);
> +
> + val = (timing->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE) ? 1 : 0;
> + rk_write_reg(COLORM_ACTIVE_LOW, val);
> +
> + /* Set video mode */
> + rk_write_reg(CMD_VIDEO_MODE, VIDEO_MODE);
> +
> + /* Set video mode transmission type as burst mode */
> + rk_write_reg(VID_MODE_TYPE, BURST_MODE);
> +
> + /* Set pix num in a video package */
> + rk_write_reg(VID_PKT_SIZE, 0x4b0);
> +
> + /* Set dpi color coding depth 24 bit */
> + timing_node = fdt_subnode_offset(gd->fdt_blob,
> + dev_of_offset(dev), "display-timings");
> + node = fdt_first_subnode(gd->fdt_blob, timing_node);
> + val = fdtdec_get_int(gd->fdt_blob, node, "bits-per-pixel", -1);
> + switch (val) {
> + case 16:
> + rk_write_reg(DPI_COLOR_CODING, DPI_16BIT_CFG_1);
> + break;
> + case 24:
> + rk_write_reg(DPI_COLOR_CODING, DPI_24BIT);
> + break;
> + case 30:
> + rk_write_reg(DPI_COLOR_CODING, DPI_30BIT);
> + break;
> + default:
> + rk_write_reg(DPI_COLOR_CODING, DPI_24BIT);
> + }
> + /* Enable low power mode */
> + rk_write_reg(LP_CMD_EN, 1);
> + rk_write_reg(LP_HFP_EN, 1);
> + rk_write_reg(LP_VACT_EN, 1);
> + rk_write_reg(LP_VFP_EN, 1);
> + rk_write_reg(LP_VBP_EN, 1);
> + rk_write_reg(LP_VSA_EN, 1);
> +
> + /* Division for timeout counter clk */
> + rk_write_reg(TO_CLK_DIVISION, 0x0a);
> +
> + /* Tx esc clk division from txbyte clk */
> + rk_write_reg(TX_ESC_CLK_DIVISION, txbyte_clk/txesc_clk);
> +
> + /*
> + * Timeout count for hs<->lp
> + * transation between Line period
> + */
> + rk_write_reg(HSTX_TO_CNT, 0x3e8);
> +
> + /* Phy State transfer timing */
> + rk_write_reg(PHY_STOP_WAIT_TIME, 32);
> + rk_write_reg(PHY_TXREQUESTCLKHS, 1);
> + rk_write_reg(PHY_HS2LP_TIME, 0x14);
> + rk_write_reg(PHY_LP2HS_TIME, 0x10);
> + rk_write_reg(MAX_RD_TIME, 0x2710);
> +
> + /* Power on */
> + rk_write_reg(SHUTDOWNZ, 1);
> +
> + return 0;
> +}
> +
> +/*
> + * rk mipi dphy write function
> + */
> +static void rk_mipi_phy_write(unsigned char test_code,
> + unsigned char *test_data,
> + unsigned char size)
> +{
> + int i = 0;
> + /* Write Test code */
> + rk_write_reg(PHY_TESTCLK, 1);
> + rk_write_reg(PHY_TESTDIN, test_code);
> + rk_write_reg(PHY_TESTEN, 1);
> + rk_write_reg(PHY_TESTCLK, 0);
> + rk_write_reg(PHY_TESTEN, 0);
> +
> + /* Write Test data */
> + for (i = 0; i < size; i++) {
> + rk_write_reg(PHY_TESTCLK, 0);
> + rk_write_reg(PHY_TESTDIN, test_data[i]);
> + rk_write_reg(PHY_TESTCLK, 1);
> + }
> +}
> +
> +/*
> + * mipi dphy config function. calculate the suitable prediv,
> + * feedback div,fsfreqrang value ,cap ,lpf and so on
> + * according to the given pix clk ratthe.and then enable phy
> + */
> +static int rk_mipi_phy_enable(struct mipi_dsi *mipi)
> +{
> + int i;
> + u64 fbdiv;
> + u64 prediv = 1;
> + u64 ddr_clk = mipi->phy_clk;
> + u32 refclk = mipi->ref_clk;
> + u32 remain = refclk;
> + unsigned char test_data[2] = {0};
> +
> + /* dphy fsfreqrang */
> + int rang[39][2] = {
> + {90, 0x01}, {100, 0x10}, {110, 0x20}, {130, 0x01},
> + {140, 0x11}, {150, 0x21}, {170, 0x02}, {180, 0x12},
> + {200, 0x22}, {220, 0x03}, {240, 0x13}, {250, 0x23},
> + {270, 0x04}, {300, 0x14}, {330, 0x05}, {360, 0x15},
> + {400, 0x25}, {450, 0x06}, {500, 0x16}, {550, 0x07},
> + {600, 0x17}, {650, 0x08}, {700, 0x18}, {750, 0x09},
> + {800, 0x19}, {850, 0x29}, {900, 0x39}, {950, 0x0a},
> + {1000, 0x1a}, {1050, 0x2a}, {1100, 0x3a}, {1150, 0x0b},
> + {1200, 0x1b}, {1250, 0x2b}, {1300, 0x3b}, {1350, 0x0c},
> + {1400, 0x1c}, {1450, 0x2c}, {1500, 0x3c} };
> +
> + /* Shutdown mode */
> + rk_write_reg(PHY_SHUTDOWNZ, 0);
> + rk_write_reg(PHY_RSTZ, 0);
> + rk_write_reg(PHY_TESTCLR, 1);
> + mdelay(10);
> + /* Pll locking */
> + rk_write_reg(PHY_TESTCLR, 0);
> + mdelay(10);
> +
> + /* config cp and lfp */
> + test_data[0] = 0x80 | (ddr_clk / (200*MHz)) << 3 | 0x3;
> + rk_mipi_phy_write(0x10, test_data, 1);
> +
> + test_data[0] = 0x8;
> + rk_mipi_phy_write(0x11, test_data, 1);
> +
> + test_data[0] = 0x80 | 0x40;
> + rk_mipi_phy_write(0x12, test_data, 1);
> +
> + /* select the suitable value for fsfreqrang reg */
> + for (i = 0; i < 39; i++) {
> + if (ddr_clk / (MHz) >= rang[i][0])
> + break;
> + }
> + test_data[0] = rang[i][1] << 1;
> + rk_mipi_phy_write(code_hs_rx_lane0, test_data, 1);
> + /*
> + * Calculate the best ddrclk and it's
> + * corresponding div value, If the given
> + * pixelclock is great than 250M, the ddr
> + * clk will be fix 1500M.otherwise , it's
> + * equal to ddr_clk= pixclk*6.
> + */
> + for (i = 1; i < 6; i++) {
> + if ((ddr_clk * i % refclk < remain) &&
> + (ddr_clk * i / refclk) < 512) {
> + prediv = i;
> + remain = ddr_clk * i % refclk;
> + }
> + }
> + fbdiv = ddr_clk * prediv / refclk;
> + ddr_clk = refclk * fbdiv / prediv;
> + mipi->phy_clk = ddr_clk;
> + /* config prediv and feedback reg */
> + test_data[0] = prediv - 1;
> + rk_mipi_phy_write(code_pll_input_div_rat, test_data, 1);
> + mdelay(2);
> + test_data[0] = (fbdiv - 1) & 0x1f;
> + rk_mipi_phy_write(code_pll_loop_div_rat, test_data, 1);
> + mdelay(2);
> + test_data[0] = (fbdiv - 1) >> 5 | 0x80;
> + rk_mipi_phy_write(code_pll_loop_div_rat, test_data, 1);
> + mdelay(2);
> + test_data[0] = 0x30;
> + rk_mipi_phy_write(code_pll_input_loop_div_rat, test_data, 1);
> + mdelay(2);
> +
> + /* rest config */
> + test_data[0] = 0x4d;
> + rk_mipi_phy_write(0x20, test_data, 1);
> +
> + test_data[0] = 0x3d;
> + rk_mipi_phy_write(0x21, test_data, 1);
> +
> + test_data[0] = 0xdf;
> + rk_mipi_phy_write(0x21, test_data, 1);
> +
> + test_data[0] = 0x7;
> + rk_mipi_phy_write(0x22, test_data, 1);
> +
> + test_data[0] = 0x80 | 0x7;
> + rk_mipi_phy_write(0x22, test_data, 1);
> +
> + test_data[0] = 0x80 | 15;
> + rk_mipi_phy_write(code_hstxdatalanerequsetstatetime,
> + test_data, 1);
> + test_data[0] = 0x80 | 85;
> + rk_mipi_phy_write(code_hstxdatalanepreparestatetime,
> + test_data, 1);
> + test_data[0] = 0x40 | 10;
> + rk_mipi_phy_write(code_hstxdatalanehszerostatetime,
> + test_data, 1);
> + /* enter into stop mode */
> + rk_write_reg(N_LANES, 0x03);
> + rk_write_reg(PHY_ENABLECLK, 1);
> + mdelay(10);
> + rk_write_reg(PHY_FORCEPLL, 1);
> + mdelay(10);
> + rk_write_reg(PHY_SHUTDOWNZ, 1);
> + mdelay(10);
> + rk_write_reg(PHY_RSTZ, 1);
> + mdelay(10);
> +
> + return 0;
> +}
> +
> +static int enable(struct udevice *dev, int panel_bpp,
> + const struct display_timing *timing)
> +{
> + struct udevice *panel;
> + /* Check if there are avalble panel */
> + if (uclass_first_device(UCLASS_PANEL, &panel)) {
> + debug("No panel found@%s_LINE:%d\n", __func__, __LINE__);
> + return -EINVAL;
> + }
> + return panel_enable_backlight(panel);
> +}
> +
> +/*
> + * probe function: check panel existence and reading
> + * it's timing. then config mipi dsi controller and
> + * enable it according to the timing parameter
> + */
> +static int probe(struct udevice *dev)
> +{
> + struct display_timing timing;
> + struct mipi_dsi mipi;
> +
> + /* Read panel timing,and save to struct timing */
> + rk_mipi_read_timing(dev, &timing);
> +
> + /* fill the mipi controller parameter */
> + mipi.ref_clk = 24*MHz;
> + mipi.sys_clk = mipi.ref_clk;
> + mipi.pix_clk = timing.pixelclock.typ;
> + mipi.phy_clk = mipi.pix_clk * 6;
> + mipi.txbyte_clk = mipi.phy_clk / 8;
> + mipi.txesc_clk = 20*MHz;
> +
> + /* config mipi dsi according to timing and enable it */
> + rk_mipi_dsi_enable(dev, &mipi, &timing);
> +
> + /* init mipi dsi phy */
> + rk_mipi_phy_enable(&mipi);
> +
> + return 0;
> +}
> +
> +static const struct dm_display_ops rk_mipi_dsi_ops = {
> + .read_timing = rk_mipi_read_timing,
> + .enable = enable,
> +};
> +
> +static const struct udevice_id rk_mipi_dsi_ids[] = {
> + { .compatible = "rockchip,rk3399_mipi_dsi" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(rk_mipi_dsi) = {
> + .name = "rk_mipi_dsi",
> + .id = UCLASS_DISPLAY,
> + .of_match = rk_mipi_dsi_ids,
> + .probe = probe,
> + .ops = &rk_mipi_dsi_ops,
> +};
> +
> diff --git a/drivers/video/rockchip/rk_vop.c b/drivers/video/rockchip/rk_vop.c
> index aeecb58..1de00f1 100644
> --- a/drivers/video/rockchip/rk_vop.c
> +++ b/drivers/video/rockchip/rk_vop.c
> @@ -109,6 +109,10 @@ void rkvop_mode_set(struct rk3288_vop *regs,
> clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN,
> V_HDMI_OUT_EN(1));
> break;
> + case VOP_MODE_MIPI:
> + clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN,
> + V_MIPI_OUT_EN(1));
> + break;
> case VOP_MODE_EDP:
> default:
> clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN,
> @@ -245,7 +249,7 @@ int rk_display_init(struct udevice *dev, ulong fbbase,
> ret = clk_get_by_index(dev, 1, &clk);
> if (!ret)
> ret = clk_set_rate(&clk, timing.pixelclock.typ);
> - if (ret) {
> + if (!ret) {
> debug("%s: Failed to set pixel clock: ret=%d\n", __func__, ret);
> return ret;
> }
> @@ -327,7 +331,7 @@ static int rk_vop_probe(struct udevice *dev)
> for (node = fdt_first_subnode(blob, port);
> node > 0;
> node = fdt_next_subnode(blob, node)) {
> - ret = rk_display_init(dev, plat->base, VIDEO_BPP16, node);
> + ret = rk_display_init(dev, plat->base, VIDEO_BPP32, node);
> if (ret)
> debug("Device failed: ret=%d\n", ret);
> if (!ret)
> @@ -342,7 +346,7 @@ static int rk_vop_bind(struct udevice *dev)
> {
> struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
>
> - plat->size = 1920 * 1080 * 2;
> + plat->size = 1920 * 1200 * 4;
>
> return 0;
> }
> @@ -351,6 +355,8 @@ static const struct video_ops rk_vop_ops = {
> };
>
> static const struct udevice_id rk_vop_ids[] = {
> + { .compatible = "rockchip,rk3399-vop-big" },
> + { .compatible = "rockchip,rk3399-vop-lit" },
> { .compatible = "rockchip,rk3288-vop" },
> { }
> };
> --
{ .compatible = "rockchip,rk3288-vop" },
> 1.9.1
>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
^ permalink raw reply [flat|nested] 19+ messages in thread* [U-Boot] [PATCH 5/7] Add mipi display support for rk3399 && rk3288
2017-04-01 14:42 ` [U-Boot] [PATCH 5/7] Add mipi display support for rk3399 && rk3288 eric.gao at rock-chips.com
2017-04-05 3:52 ` Jacob Chen
@ 2017-04-06 3:44 ` Simon Glass
1 sibling, 0 replies; 19+ messages in thread
From: Simon Glass @ 2017-04-06 3:44 UTC (permalink / raw)
To: u-boot
Hi Eric,
On 1 April 2017 at 08:42, <eric.gao@rock-chips.com> wrote:
> From: "eric.gao" <eric.gao@rock-chips.com>
>
> Signed-off-by: eric.gao <eric.gao@rock-chips.com>
> ---
>
> arch/arm/dts/rk3399-evb.dts | 33 ++
> arch/arm/dts/rk3399.dtsi | 72 +++++
Please can you put the .dts changes in a separate patch?
> arch/arm/include/asm/arch-rockchip/cru_rk3399.h | 2 +-
> arch/arm/include/asm/arch-rockchip/mipi_rk3399.h | 203 +++++++++++++
> arch/arm/include/asm/arch-rockchip/vop_rk3288.h | 1 +
> configs/evb-rk3399_defconfig | 4 +
Also enabling it for a board should be in a separate patch.
> drivers/video/Kconfig | 2 +
> drivers/video/rockchip/Kconfig | 44 +++
> drivers/video/rockchip/Makefile | 7 +-
> drivers/video/rockchip/panel.c | 81 +++++
> drivers/video/rockchip/rk_mipi.c | 371 +++++++++++++++++++++++
> drivers/video/rockchip/rk_vop.c | 12 +-
And the actual driver should be in a driver patch. So I think you want
3 patches altogether.
> 12 files changed, 827 insertions(+), 5 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-rockchip/mipi_rk3399.h
> create mode 100644 drivers/video/rockchip/Kconfig
> create mode 100644 drivers/video/rockchip/panel.c
> create mode 100644 drivers/video/rockchip/rk_mipi.c
>
> diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts
> index 7a889c7..abb00e8 100644
> --- a/arch/arm/dts/rk3399-evb.dts
> +++ b/arch/arm/dts/rk3399-evb.dts
> @@ -52,6 +52,10 @@
> gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
> };
>
> + panel:panel {
> + compatible = "BOE,TV080WUM";
> + status = "disabled";
> + };
> vccsys: vccsys {
> compatible = "regulator-fixed";
> regulator-name = "vccsys";
> @@ -218,6 +222,35 @@
> };
> };
>
> +&panel {
> + backlight_en = <&gpio1 13 GPIO_ACTIVE_HIGH>;
> + backlight_pwm = <&gpio4 18 GPIO_ACTIVE_HIGH>;
> + power-supply = <&vcc33_lcd>;
> + status = "okay";
> +};
> +
> +&mipi_dsi {
> + status = "okay";
> + display-timings {
> + timing0 {
> + bits-per-pixel = <24>;
> + clock-frequency = <160000000>;
> + hfront-porch = <120>;
> + hsync-len = <20>;
> + hback-porch = <21>;
> + hactive = <1200>;
> + vfront-porch = <21>;
> + vsync-len = <3>;
> + vback-porch = <18>;
> + vactive = <1920>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> + };
> +};
> +
> &pinctrl {
> pmic {
> pmic_int_l: pmic-int-l {
> diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi
> index 93e3bf4..c82e674 100644
> --- a/arch/arm/dts/rk3399.dtsi
> +++ b/arch/arm/dts/rk3399.dtsi
> @@ -667,6 +667,78 @@
> status = "disabled";
> };
>
> + vopl: vop at ff8f0000 {
> + u-boot,dm-pre-reloc;
> + compatible = "rockchip,rk3399-vop-lit";
> + reg = <0x0 0xff8f0000 0x0 0x3efc>;
> + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
> + clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
> + resets = <&cru SRST_A_VOP1>, <&cru SRST_H_VOP1>, <&cru SRST_D_VOP1>;
> + reset-names = "axi", "ahb", "dclk";
> + status = "okay";
> + vopl_out: port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + vopl_out_mipi: endpoint at 0 {
> + reg = <3>;
> + remote-endpoint = <&mipi_in_vopl>;
> + };
> + };
> + };
> +
> + vopb: vop at ff900000 {
> + u-boot,dm-pre-reloc;
> + compatible = "rockchip,rk3399-vop-big";
> + reg = <0x0 0xff900000 0x0 0x3efc>;
> + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
> + #clock-cells = <0>;
> + clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
> + resets = <&cru SRST_A_VOP0>, <&cru SRST_H_VOP0>, <&cru SRST_D_VOP0>;
> + reset-names = "axi", "ahb", "dclk";
> + /*power-domains = <&power RK3399_PD_VOPB>;*/
> + status = "okay";
> + vopb_out: port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + vopb_out_mipi: endpoint at 0 {
> + reg = <3>;
> + remote-endpoint = <&mipi_in_vopb>;
> + };
> + };
> + };
> +
> + mipi_dsi: mipi at ff960000 {
> + compatible = "rockchip,rk3399_mipi_dsi";
> + reg = <0x0 0xff960000 0x0 0x8000>;
> + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&cru SCLK_MIPIDPHY_REF>, <&cru PCLK_MIPI_DSI0>,
> + <&cru SCLK_DPHY_TX0_CFG>;
> + clock-names = "ref", "pclk", "phy_cfg";
> + rockchip,grf = <&grf>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> + mipi_in: port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + mipi_in_vopb: endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&vopb_out_mipi>;
> + };
> + mipi_in_vopl: endpoint at 1 {
> + reg = <1>;
> + remote-endpoint = <&vopl_out_mipi>;
> + };
> + };
> + };
> + };
> +
> pinctrl: pinctrl {
> u-boot,dm-pre-reloc;
> compatible = "rockchip,rk3399-pinctrl";
> diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3399.h b/arch/arm/include/asm/arch-rockchip/cru_rk3399.h
> index cf830d0..8aa08d4 100644
> --- a/arch/arm/include/asm/arch-rockchip/cru_rk3399.h
> +++ b/arch/arm/include/asm/arch-rockchip/cru_rk3399.h
> @@ -74,7 +74,7 @@ check_member(rk3399_cru, sdio1_con[1], 0x594);
> #define OSC_HZ (24*MHz)
> #define APLL_HZ (600*MHz)
> #define GPLL_HZ (594*MHz)
> -#define CPLL_HZ (384*MHz)
> +#define CPLL_HZ (594*MHz)
> #define PPLL_HZ (676*MHz)
>
> #define PMU_PCLK_HZ (48*MHz)
> diff --git a/arch/arm/include/asm/arch-rockchip/mipi_rk3399.h b/arch/arm/include/asm/arch-rockchip/mipi_rk3399.h
> new file mode 100644
> index 0000000..478cb21
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-rockchip/mipi_rk3399.h
> @@ -0,0 +1,203 @@
> +/*
> + * Copyright (C) 2017-2025 Fuzhou Rockchip Electronics Co., Ltd
> + * author: eric.gao at rock-chips.com
> + * create date: 2017-03-31
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef RK33_MIPI_DSI_H
> +#define RK33_MIPI_DSI_H
> +
> +#define GRF_BASE 0xFF770000
Can we get this from the device tree? We have a SYSCON for GRF I think.
> +#define RK_GRF_CON20 0x06250
> +#define RK_GRF_CON22 0x06258
> +#define MHz 1000000
Don't we have this defined somewhere?
> +
> +#define MIPI_DSI_HOST0_BASE 0xff960000
> +#define MIPI_DSI_HOST1_BASE 0xff968000
Can we get these from the device tree?
> +
> +/*
> + * function bits definition
Function bits for what? Can you expand the comment?
> + * register addr | bits | offest
> + */
> +#define DSI_HOST_BITS(addr, bits, bit_offset) \
> + ((addr<<16) | (bits<<8) | (bit_offset))
> +
> +/* DWC_DSI_VERSION_0X3133302A */
> +#define VERSION DSI_HOST_BITS(0X000, 32, 0)
> +#define SHUTDOWNZ DSI_HOST_BITS(0X004, 1, 0)
> +#define TO_CLK_DIVISION DSI_HOST_BITS(0X008, 8, 8)
> +#define TX_ESC_CLK_DIVISION DSI_HOST_BITS(0X008, 8, 0)
> +#define DPI_VCID DSI_HOST_BITS(0X00C, 2, 0)
> +#define EN18_LOOSELY DSI_HOST_BITS(0X010, 1, 8)
> +#define DPI_COLOR_CODING DSI_HOST_BITS(0X010, 4, 0)
> +#define COLORM_ACTIVE_LOW DSI_HOST_BITS(0X014, 1, 4)
> +#define SHUTD_ACTIVE_LOW DSI_HOST_BITS(0X014, 1, 3)
> +#define HSYNC_ACTIVE_LOW DSI_HOST_BITS(0X014, 1, 2)
> +#define VSYNC_ACTIVE_LOW DSI_HOST_BITS(0X014, 1, 1)
> +#define DATAEN_ACTIVE_LOW DSI_HOST_BITS(0X014, 1, 0)
> +#define OUTVACT_LPCMD_TIME DSI_HOST_BITS(0X018, 8, 16)
> +#define INVACT_LPCMD_TIME DSI_HOST_BITS(0X018, 8, 0)
> +#define CRC_RX_EN DSI_HOST_BITS(0X02C, 1, 4)
> +#define ECC_RX_EN DSI_HOST_BITS(0X02C, 1, 3)
> +#define BTA_EN DSI_HOST_BITS(0X02C, 1, 2)
> +#define EOTP_RX_EN DSI_HOST_BITS(0X02C, 1, 1)
> +#define EOTP_TX_EN DSI_HOST_BITS(0X02C, 1, 0)
> +#define GEN_VID_RX DSI_HOST_BITS(0X030, 2, 0)
> +#define CMD_VIDEO_MODE DSI_HOST_BITS(0X034, 1, 0)
> +#define VPG_ORIENTATION DSI_HOST_BITS(0X038, 1, 24)
> +#define VPG_MODE DSI_HOST_BITS(0X038, 1, 20)
> +#define VPG_EN DSI_HOST_BITS(0X038, 1, 16)
> +#define LP_CMD_EN DSI_HOST_BITS(0X038, 1, 15)
> +#define FRAME_BTA_ACK_EN DSI_HOST_BITS(0X038, 1, 14)
> +#define LP_HFP_EN DSI_HOST_BITS(0X038, 1, 13)
> +#define LP_HBP_EN DSI_HOST_BITS(0X038, 1, 12)
> +#define LP_VACT_EN DSI_HOST_BITS(0X038, 1, 11)
> +#define LP_VFP_EN DSI_HOST_BITS(0X038, 1, 10)
> +#define LP_VBP_EN DSI_HOST_BITS(0X038, 1, 9)
> +#define LP_VSA_EN DSI_HOST_BITS(0X038, 1, 8)
> +#define VID_MODE_TYPE DSI_HOST_BITS(0X038, 2, 0)
> +#define VID_PKT_SIZE DSI_HOST_BITS(0X03C, 14, 0)
> +#define NUM_CHUNKS DSI_HOST_BITS(0X040, 13, 0)
> +#define NULL_PKT_SIZE DSI_HOST_BITS(0X044, 13, 0)
> +#define VID_HSA_TIME DSI_HOST_BITS(0X048, 12, 0)
> +#define VID_HBP_TIME DSI_HOST_BITS(0X04C, 12, 0)
> +#define VID_HLINE_TIME DSI_HOST_BITS(0X050, 15, 0)
> +#define VID_VSA_LINES DSI_HOST_BITS(0X054, 10, 0)
> +#define VID_VBP_LINES DSI_HOST_BITS(0X058, 10, 0)
> +#define VID_VFP_LINES DSI_HOST_BITS(0X05C, 10, 0)
> +#define VID_ACTIVE_LINES DSI_HOST_BITS(0X060, 14, 0)
> +#define EDPI_CMD_SIZE DSI_HOST_BITS(0X064, 16, 0)
> +#define MAX_RD_PKT_SIZE DSI_HOST_BITS(0X068, 1, 24)
> +#define DCS_LW_TX DSI_HOST_BITS(0X068, 1, 19)
> +#define DCS_SR_0P_TX DSI_HOST_BITS(0X068, 1, 18)
> +#define DCS_SW_1P_TX DSI_HOST_BITS(0X068, 1, 17)
> +#define DCS_SW_0P_TX DSI_HOST_BITS(0X068, 1, 16)
> +#define GEN_LW_TX DSI_HOST_BITS(0X068, 1, 14)
> +#define GEN_SR_2P_TX DSI_HOST_BITS(0X068, 1, 13)
> +#define GEN_SR_1P_TX DSI_HOST_BITS(0X068, 1, 12)
> +#define GEN_SR_0P_TX DSI_HOST_BITS(0X068, 1, 11)
> +#define GEN_SW_2P_TX DSI_HOST_BITS(0X068, 1, 10)
> +#define GEN_SW_1P_TX DSI_HOST_BITS(0X068, 1, 9)
> +#define GEN_SW_0P_TX DSI_HOST_BITS(0X068, 1, 8)
> +#define ACK_RQST_EN DSI_HOST_BITS(0X068, 1, 1)
> +#define TEAR_FX_EN DSI_HOST_BITS(0X068, 1, 0)
> +#define GEN_WC_MSBYTE DSI_HOST_BITS(0X06C, 14, 16)
> +#define GEN_WC_LSBYTE DSI_HOST_BITS(0X06C, 8, 8)
> +#define GEN_VC DSI_HOST_BITS(0X06C, 2, 6)
> +#define GEN_DT DSI_HOST_BITS(0X06C, 6, 0)
> +#define GEN_PLD_DATA DSI_HOST_BITS(0X070, 32, 0)
> +#define GEN_RD_CMD_BUSY DSI_HOST_BITS(0X074, 1, 6)
> +#define GEN_PLD_R_FULL DSI_HOST_BITS(0X074, 1, 5)
> +#define GEN_PLD_R_EMPTY DSI_HOST_BITS(0X074, 1, 4)
> +#define GEN_PLD_W_FULL DSI_HOST_BITS(0X074, 1, 3)
> +#define GEN_PLD_W_EMPTY DSI_HOST_BITS(0X074, 1, 2)
> +#define GEN_CMD_FULL DSI_HOST_BITS(0X074, 1, 1)
> +#define GEN_CMD_EMPTY DSI_HOST_BITS(0X074, 1, 0)
> +#define HSTX_TO_CNT DSI_HOST_BITS(0X078, 16, 16)
> +#define LPRX_TO_CNT DSI_HOST_BITS(0X078, 16, 0)
> +#define HS_RD_TO_CNT DSI_HOST_BITS(0X07C, 16, 0)
> +#define LP_RD_TO_CNT DSI_HOST_BITS(0X080, 16, 0)
> +#define PRESP_TO_MODE DSI_HOST_BITS(0X084, 1, 24)
> +#define HS_WR_TO_CNT DSI_HOST_BITS(0X084, 16, 0)
> +#define LP_WR_TO_CNT DSI_HOST_BITS(0X088, 16, 0)
> +#define BTA_TO_CNT DSI_HOST_BITS(0X08C, 16, 0)
> +#define AUTO_CLKLANE_CTRL DSI_HOST_BITS(0X094, 1, 1)
> +#define PHY_TXREQUESTCLKHS DSI_HOST_BITS(0X094, 1, 0)
> +#define PHY_HS2LP_TIME_CLK_LANE DSI_HOST_BITS(0X098, 10, 16)
> +#define PHY_HS2HS_TIME_CLK_LANE DSI_HOST_BITS(0X098, 10, 0)
> +#define PHY_HS2LP_TIME DSI_HOST_BITS(0X09C, 8, 24)
> +#define PHY_LP2HS_TIME DSI_HOST_BITS(0X09C, 8, 16)
> +#define MAX_RD_TIME DSI_HOST_BITS(0X09C, 15, 0)
> +#define PHY_FORCEPLL DSI_HOST_BITS(0X0A0, 1, 3)
> +#define PHY_ENABLECLK DSI_HOST_BITS(0X0A0, 1, 2)
> +#define PHY_RSTZ DSI_HOST_BITS(0X0A0, 1, 1)
> +#define PHY_SHUTDOWNZ DSI_HOST_BITS(0X0A0, 1, 0)
> +#define PHY_STOP_WAIT_TIME DSI_HOST_BITS(0X0A4, 8, 8)
> +#define N_LANES DSI_HOST_BITS(0X0A4, 2, 0)
> +#define PHY_TXEXITULPSLAN DSI_HOST_BITS(0X0A8, 1, 3)
> +#define PHY_TXREQULPSLAN DSI_HOST_BITS(0X0A8, 1, 2)
> +#define PHY_TXEXITULPSCLK DSI_HOST_BITS(0X0A8, 1, 1)
> +#define PHY_TXREQULPSCLK DSI_HOST_BITS(0X0A8, 1, 0)
> +#define PHY_TX_TRIGGERS DSI_HOST_BITS(0X0AC, 4, 0)
> +#define PHYSTOPSTATECLKLANE DSI_HOST_BITS(0X0B0, 1, 2)
> +#define PHYLOCK DSI_HOST_BITS(0X0B0, 1, 0)
> +#define PHY_TESTCLK DSI_HOST_BITS(0X0B4, 1, 1)
> +#define PHY_TESTCLR DSI_HOST_BITS(0X0B4, 1, 0)
> +#define PHY_TESTEN DSI_HOST_BITS(0X0B8, 1, 16)
> +#define PHY_TESTDOUT DSI_HOST_BITS(0X0B8, 8, 8)
> +#define PHY_TESTDIN DSI_HOST_BITS(0X0B8, 8, 0)
> +#define PHY_TEST_CTRL1 DSI_HOST_BITS(0X0B8, 17, 0)
> +#define PHY_TEST_CTRL0 DSI_HOST_BITS(0X0B4, 2, 0)
> +#define INT_ST0 DSI_HOST_BITS(0X0BC, 21, 0)
> +#define INT_ST1 DSI_HOST_BITS(0X0C0, 18, 0)
> +#define INT_MKS0 DSI_HOST_BITS(0X0C4, 21, 0)
> +#define INT_MKS1 DSI_HOST_BITS(0X0C8, 18, 0)
> +#define INT_FORCE0 DSI_HOST_BITS(0X0D8, 21, 0)
> +#define INT_FORCE1 DSI_HOST_BITS(0X0DC, 18, 0)
> +
> +#define code_hs_rx_clock 0x34
> +#define code_hs_rx_lane0 0x44
> +#define code_hs_rx_lane1 0x54
> +#define code_hs_rx_lane2 0x84
> +#define code_hs_rx_lane3 0x94
> +
> +#define code_pll_input_div_rat 0x17
> +#define code_pll_loop_div_rat 0x18
> +#define code_pll_vcorange_vcocap 0x10
> +#define code_pll_input_loop_div_rat 0x19
> +#define code_pll_cpctrl 0x11
> +
> +#define code_hstxdatalanerequsetstatetime 0x70
> +#define code_hstxdatalanepreparestatetime 0x71
> +#define code_hstxdatalanehszerostatetime 0x72
Please use all caps for these defines.
> +
> +enum vid_mode_type_enum {
How about vid_mode_type_t as it is shorter
> + NON_BURST_SYNC_PLUSE = 0,
> + NON_BURST_SYNC_EVENT,
> + BURST_MODE,
> +};
> +
> +enum cmd_video_mode {
> + VIDEO_MODE = 0,
> + CMD_MODE,
> +};
> +
> +enum dpi_color_coding {
> + DPI_16BIT_CFG_1 = 0,
> + DPI_16BIT_CFG_2,
> + DPI_16BIT_CFG_3,
> + DPI_18BIT_CFG_1,
> + DPI_18BIT_CFG_2,
> + DPI_24BIT,
> + DPI_20BIT_YCBCR_422_LP,
> + DPI_24BIT_YCBCR_422,
> + DPI_16BIT_YCBCR_422,
> + DPI_30BIT,
> + DPI_36BIT,
> + DPI_12BIT_YCBCR_420,
> +};
> +
> +enum vop_id {
> + VOP_B = 0,
> + VOP_L,
> +};
> +
> +/*
> + * Name :rk_write_reg(reg,val)
> + *
> + * reg: register name from the above define file,it contain the addr,
> + * bits number and bits offset
> + * val: reg value that will be writen to register, it can't be over
> + * the real bit num limit, For example, TO_CLK_DIVISION have 8
> + * bits space, so it's value can't great than 255
> + */
> +#define GET_VAL(reg, val) ((val & (~(0xffffffff << ((reg & 0xffff) >> 8)))) \
> + << (reg&0xff)) | ((readl((reg >> 16)+MIPI_DSI_HOST0_BASE)) & \
> + (~((0xffffffff<<(reg&0xff))&(0xffffffff>>\
> + (32-(reg&0xff)-((reg>>8)&0xff))))))
What is the purpose of this? Could it instead be a table of values?
struct something {
u8 addr;
u8 bits;
u8 offset;
}
static const struct something some_table[] = {
{ 1, 2, 3},
...
};
> +#define GET_ADDR(reg) (reg >> 16)+MIPI_DSI_HOST0_BASE
Can we drop this one?
> +#define rk_write_reg(reg, val) writel(GET_VAL(reg, val), GET_ADDR(reg));
Is this different from rk_clrsetreg() ? Can you put this next to that function?
> +
> +#endif /* end of RK33_MIPI_DSI_H */
> diff --git a/arch/arm/include/asm/arch-rockchip/vop_rk3288.h b/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
> index 0ce3d67..d5599ec 100644
> --- a/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
> +++ b/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
> @@ -90,6 +90,7 @@ enum vop_modes {
> VOP_MODE_EDP = 0,
> VOP_MODE_HDMI,
> VOP_MODE_LVDS,
> + VOP_MODE_MIPI,
> VOP_MODE_NONE,
> VOP_MODE_AUTO_DETECT,
> VOP_MODE_UNKNOWN,
> diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
> index aac6d2d..b9cb0e8 100644
> --- a/configs/evb-rk3399_defconfig
> +++ b/configs/evb-rk3399_defconfig
> @@ -64,3 +64,7 @@ CONFIG_PMIC_CHILDREN=y
> CONFIG_SPL_PMIC_CHILDREN=y
> CONFIG_PMIC_RK808=y
> CONFIG_REGULATOR_RK808=y
> +CONFIG_DM_VIDEO=y
> +CONFIG_DISPLAY=y
> +CONFIG_VIDEO_ROCKCHIP=y
> +CONFIG_DISPLAY_MIPI=y
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index 2069576..4b03a9a 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -405,6 +405,8 @@ config VIDEO_ROCKCHIP
> (DSI). This driver supports the on-chip video output device, and
> targets the Rockchip RK3288.
>
> +source "drivers/video/rockchip/Kconfig"
> +
> config VIDEO_SANDBOX_SDL
> bool "Enable sandbox video console using SDL"
> depends on SANDBOX
> diff --git a/drivers/video/rockchip/Kconfig b/drivers/video/rockchip/Kconfig
> new file mode 100644
> index 0000000..72473f6
> --- /dev/null
> +++ b/drivers/video/rockchip/Kconfig
> @@ -0,0 +1,44 @@
> +#
> +# video drivers configuration
> +# for rockchip soc
> +#
> +
> +menu "Video Display Port Select"
> +
> +config DISPLAY_MIPI
> + bool "MIPI Port"
> + depends on VIDEO_ROCKCHIP
> + help
> + Select MIPI dsi for video port.
> + if you want to enable these function,you need
> + to turn on the DM_VIDEO,VDEIO_ROCKCHIP together
> + what is more,you shoud also enable the related
> + power,such as lcd3v3, lcd1v8,lcd1v0 and so on.
> +config DISPLAY_EDP
> + bool "EDP Port"
> + depends on VIDEO_ROCKCHIP
> + help
> + Select EDP for video port.
> + if you want to enable these function,you need
> + to turn on the DM_VIDEO,VDEIO_ROCKCHIP together
> + what is more,you shoud also enable the related
> + power,such as lcd3v3, lcd1v8,lcd1v0 and so on.
> +config DISPLAY_LVDS
> + bool "LVDS Port"
> + depends on VIDEO_ROCKCHIP
> + help
> + Select LVDS for video port.
> + if you want to enable these function,you need
> + to turn on the DM_VIDEO,VDEIO_ROCKCHIP together
> + what is more,you shoud also enable the related
> + power,such as lcd3v3, lcd1v8,lcd1v0 and so on.
> +config DISPLAY_HDMI
> + bool "HDMI port"
> + depends on VIDEO_ROCKCHIP
> + help
> + Select HDMI for video port
There are two different things:
- Compiling in the driver
- Deciding which one to use
Here I think you have one config for both. I think the config should
just decide whether to compile in the driver. The device tree, or some
environment variable, should select which to use.
> + if you want to enable these function,you need
> + to turn on the DM_VIDEO,VDEIO_ROCKCHIP together
> + what is more,you shoud also enable the related
> + power,such as lcd3v3, lcd1v8,lcd1v0 and so on.
> +endmenu
Is it possible to have more than one port? The above settings are in
the device tree, aren't they? For example on firefly I think it uses
HDMI if it can detect it.
> diff --git a/drivers/video/rockchip/Makefile b/drivers/video/rockchip/Makefile
> index 7962f86..98b26ea 100644
> --- a/drivers/video/rockchip/Makefile
> +++ b/drivers/video/rockchip/Makefile
> @@ -5,4 +5,9 @@
> # SPDX-License-Identifier: GPL-2.0+
> #
>
> -obj-y += rk_edp.o rk_hdmi.o rk_vop.o rk_lvds.o
> +obj-$(CONFIG_VIDEO_ROCKCHIP) += rk_vop.o
> +obj-$(CONFIG_VIDEO_ROCKCHIP) += panel.o
> +obj-$(CONFIG_DISPLAY_MIPI) += rk_mipi.o
> +obj-$(CONFIG_DISPLAY_EDP) += rk_edp.o
> +obj-$(CONFIG_DISPLAY_LVDS) += rk_lvds.o
> +obj-$(CONFIG_DISPLAY_HDMI) += rk_hdmi.o
> diff --git a/drivers/video/rockchip/panel.c b/drivers/video/rockchip/panel.c
> new file mode 100644
> index 0000000..8b02b0f
> --- /dev/null
> +++ b/drivers/video/rockchip/panel.c
> @@ -0,0 +1,81 @@
> +/*
> + * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
Can you use SPDX?
> + */
> +
> +#include <common.h>
> +#include <clk.h>
> +#include <display.h>
> +#include <dm.h>
> +#include <edid.h>
> +#include <panel.h>
> +#include <asm/hardware.h>
> +#include <regmap.h>
> +#include <syscon.h>
> +#include <asm/gpio.h>
> +#include <asm/io.h>
> +#include <asm/arch/mipi_rk3399.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/grf_rk3288.h>
> +#include <dt-bindings/clock/rk3288-cru.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +static int bind(struct udevice *dev)
> +{
> + debug("Panel bind@%s_Line:%d\n", __func__, __LINE__);
Please put a blank line before the last return in a function
> + return 0;
> +}
> +
> +static int probe(struct udevice *dev)
> +{
> + debug("Panel probe@%s_Line:%d\n", __func__, __LINE__);
> + return 0;
> +}
> +
> +int rk_panel_enable_backlight(struct udevice *dev)
static
> +{
> + struct gpio_desc bg_en, bg_pwm;
> + int node;
> +
> + node = fdt_node_offset_by_compatible(gd->fdt_blob, 0, "BOE,TV080WUM");
> + if (node < 0) {
> + debug("Can't find node@%s_Line:%d\n", __func__, __LINE__);
> + return -EINVAL;
> + }
This should be obtained via a phandle to a panel node, not searching
for a particular compatible string.
> + gpio_request_by_name_nodev(gd->fdt_blob, node, "backlight_en",
> + 0, &bg_en, GPIOD_IS_OUT);
This is a driver so you should be able to use the normal gpio_request_by_name()
> + gpio_request_by_name_nodev(gd->fdt_blob, node,
> + "backlight_pwm", 0, &bg_pwm, GPIOD_IS_OUT);
> + if (dm_gpio_is_valid(&bg_en)) {
> + dm_gpio_set_value(&bg_en, 1);
> + dm_gpio_set_value(&bg_pwm, 1);
> + } else {
> + debug("GPIO Invalid@%s_Line:%d\n", __func__, __LINE__);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static const struct panel_ops rk_panel_ops = {
> + .enable_backlight = rk_panel_enable_backlight,
> +};
> +
> +static const struct udevice_id rk_panel_ids[] = {
> + { .compatible = "BOE,TV080WUM" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(rk_panel) = {
> + .name = "rk_panel",
> + .id = UCLASS_PANEL,
> + .of_match = rk_panel_ids,
> + .bind = bind,
> + .probe = probe,
> + .ops = &rk_panel_ops,
> +};
> diff --git a/drivers/video/rockchip/rk_mipi.c b/drivers/video/rockchip/rk_mipi.c
> new file mode 100644
> index 0000000..84cfb96
> --- /dev/null
> +++ b/drivers/video/rockchip/rk_mipi.c
> @@ -0,0 +1,371 @@
> +/*
> + * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <common.h>
> +#include <clk.h>
> +#include <display.h>
> +#include <dm.h>
> +#include <fdtdec.h>
> +#include <panel.h>
> +#include <asm/hardware.h>
This does below with the other asms.
> +#include <regmap.h>
> +#include <syscon.h>
> +#include <asm/gpio.h>
> +#include <asm/io.h>
> +#include <asm/arch/mipi_rk3399.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/grf_rk3288.h>
> +#include <dt-bindings/clock/rk3288-cru.h>
> +#include <dm/uclass-internal.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +struct mipi_dsi {
> + u32 ref_clk;
> + u32 sys_clk;
> + u32 pix_clk;
> + u32 phy_clk;
> + u32 txbyte_clk;
> + u32 txesc_clk;
> +};
> +
> +int rk_mipi_read_timing(struct udevice *dev, struct display_timing *timing)
> +{
> + if (fdtdec_decode_display_timing
> + (gd->fdt_blob, dev_of_offset(dev), 0, timing)) {
> + debug("%s: Failed to decode display timing\n", __func__);
> + return -EINVAL;
> + }
> + return 0;
> +}
> +
> +int rk_mipi_dsi_enable(struct udevice *dev, struct mipi_dsi *mipi,
> + const struct display_timing *timing)
> +{
> + int node, timing_node;
> + int val;
> + struct display_plat *disp_uc_plat = dev_get_uclass_platdata(dev);
> + u32 txbyte_clk = mipi->txbyte_clk;
> + u32 txesc_clk = mipi->txesc_clk;
> +
> + txesc_clk = txbyte_clk/(txbyte_clk/txesc_clk + 1);
> +
> + /* Select the video source */
> + switch (disp_uc_plat->source_id) {
> + case VOP_B:
> + val = 0x1 << 16 | 0x0;
> + writel(val, GRF_BASE+RK_GRF_CON20);
Spaces around +
GRF_BASE should come from a SYSCON or a phandle. Set it up in your
ofdata_to_platdata() method, then you can use it in the driver.
> + break;
> + case VOP_L:
> + val = 0x1 << 16 | 0x1;
Can you have defines for these things?
> + writel(val, GRF_BASE+RK_GRF_CON20);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + /* Set Controller as TX mode */
> + val = 0x1 << 28 | 0x0 << 12;
> + val |= 0xf << 20 | 0x0 << 4;
> + val |= 0xf << 16 | 0x0;
> + writel(val, GRF_BASE+RK_GRF_CON22);
Defines for these?
> +
> + /* Set Display timing parameter */
> + rk_write_reg(VID_HSA_TIME, timing->hsync_len.typ);
> + rk_write_reg(VID_HBP_TIME, timing->hback_porch.typ);
> + rk_write_reg(VID_HLINE_TIME,
> + (timing->hsync_len.typ +
> + timing->hback_porch.typ +
> + timing->hactive.typ +
> + timing->hfront_porch.typ));
> + rk_write_reg(VID_VSA_LINES, timing->vsync_len.typ);
> + rk_write_reg(VID_VBP_LINES, timing->vback_porch.typ);
> + rk_write_reg(VID_VFP_LINES, timing->vfront_porch.typ);
> + rk_write_reg(VID_ACTIVE_LINES, timing->vactive.typ);
> +
> + /* Set Signal Polarity */
> + val = (timing->flags & DISPLAY_FLAGS_HSYNC_LOW) ? 1 : 0;
> + rk_write_reg(HSYNC_ACTIVE_LOW, val);
> +
> + val = (timing->flags & DISPLAY_FLAGS_VSYNC_LOW) ? 1 : 0;
> + rk_write_reg(VSYNC_ACTIVE_LOW, val);
> +
> + val = (timing->flags & DISPLAY_FLAGS_DE_LOW) ? 1 : 0;
> + rk_write_reg(DISPLAY_FLAGS_DE_LOW, val);
> +
> + val = (timing->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE) ? 1 : 0;
> + rk_write_reg(COLORM_ACTIVE_LOW, val);
> +
> + /* Set video mode */
> + rk_write_reg(CMD_VIDEO_MODE, VIDEO_MODE);
> +
> + /* Set video mode transmission type as burst mode */
> + rk_write_reg(VID_MODE_TYPE, BURST_MODE);
> +
> + /* Set pix num in a video package */
> + rk_write_reg(VID_PKT_SIZE, 0x4b0);
> +
> + /* Set dpi color coding depth 24 bit */
> + timing_node = fdt_subnode_offset(gd->fdt_blob,
> + dev_of_offset(dev), "display-timings");
> + node = fdt_first_subnode(gd->fdt_blob, timing_node);
> + val = fdtdec_get_int(gd->fdt_blob, node, "bits-per-pixel", -1);
> + switch (val) {
> + case 16:
> + rk_write_reg(DPI_COLOR_CODING, DPI_16BIT_CFG_1);
> + break;
> + case 24:
> + rk_write_reg(DPI_COLOR_CODING, DPI_24BIT);
> + break;
> + case 30:
> + rk_write_reg(DPI_COLOR_CODING, DPI_30BIT);
> + break;
> + default:
> + rk_write_reg(DPI_COLOR_CODING, DPI_24BIT);
> + }
> + /* Enable low power mode */
> + rk_write_reg(LP_CMD_EN, 1);
> + rk_write_reg(LP_HFP_EN, 1);
> + rk_write_reg(LP_VACT_EN, 1);
> + rk_write_reg(LP_VFP_EN, 1);
> + rk_write_reg(LP_VBP_EN, 1);
> + rk_write_reg(LP_VSA_EN, 1);
> +
> + /* Division for timeout counter clk */
> + rk_write_reg(TO_CLK_DIVISION, 0x0a);
> +
> + /* Tx esc clk division from txbyte clk */
> + rk_write_reg(TX_ESC_CLK_DIVISION, txbyte_clk/txesc_clk);
> +
> + /*
> + * Timeout count for hs<->lp
> + * transation between Line period
> + */
> + rk_write_reg(HSTX_TO_CNT, 0x3e8);
> +
> + /* Phy State transfer timing */
> + rk_write_reg(PHY_STOP_WAIT_TIME, 32);
> + rk_write_reg(PHY_TXREQUESTCLKHS, 1);
> + rk_write_reg(PHY_HS2LP_TIME, 0x14);
> + rk_write_reg(PHY_LP2HS_TIME, 0x10);
> + rk_write_reg(MAX_RD_TIME, 0x2710);
> +
> + /* Power on */
> + rk_write_reg(SHUTDOWNZ, 1);
> +
> + return 0;
> +}
> +
> +/*
> + * rk mipi dphy write function
> + */
> +static void rk_mipi_phy_write(unsigned char test_code,
> + unsigned char *test_data,
> + unsigned char size)
> +{
> + int i = 0;
> + /* Write Test code */
> + rk_write_reg(PHY_TESTCLK, 1);
> + rk_write_reg(PHY_TESTDIN, test_code);
> + rk_write_reg(PHY_TESTEN, 1);
> + rk_write_reg(PHY_TESTCLK, 0);
> + rk_write_reg(PHY_TESTEN, 0);
> +
> + /* Write Test data */
> + for (i = 0; i < size; i++) {
> + rk_write_reg(PHY_TESTCLK, 0);
> + rk_write_reg(PHY_TESTDIN, test_data[i]);
> + rk_write_reg(PHY_TESTCLK, 1);
> + }
> +}
> +
> +/*
> + * mipi dphy config function. calculate the suitable prediv,
> + * feedback div,fsfreqrang value ,cap ,lpf and so on
> + * according to the given pix clk ratthe.and then enable phy
> + */
> +static int rk_mipi_phy_enable(struct mipi_dsi *mipi)
> +{
> + int i;
> + u64 fbdiv;
> + u64 prediv = 1;
> + u64 ddr_clk = mipi->phy_clk;
> + u32 refclk = mipi->ref_clk;
> + u32 remain = refclk;
> + unsigned char test_data[2] = {0};
> +
> + /* dphy fsfreqrang */
??
> + int rang[39][2] = {
> + {90, 0x01}, {100, 0x10}, {110, 0x20}, {130, 0x01},
Indent these lines
> + {140, 0x11}, {150, 0x21}, {170, 0x02}, {180, 0x12},
> + {200, 0x22}, {220, 0x03}, {240, 0x13}, {250, 0x23},
> + {270, 0x04}, {300, 0x14}, {330, 0x05}, {360, 0x15},
> + {400, 0x25}, {450, 0x06}, {500, 0x16}, {550, 0x07},
> + {600, 0x17}, {650, 0x08}, {700, 0x18}, {750, 0x09},
> + {800, 0x19}, {850, 0x29}, {900, 0x39}, {950, 0x0a},
> + {1000, 0x1a}, {1050, 0x2a}, {1100, 0x3a}, {1150, 0x0b},
> + {1200, 0x1b}, {1250, 0x2b}, {1300, 0x3b}, {1350, 0x0c},
> + {1400, 0x1c}, {1450, 0x2c}, {1500, 0x3c} };
> +
> + /* Shutdown mode */
> + rk_write_reg(PHY_SHUTDOWNZ, 0);
> + rk_write_reg(PHY_RSTZ, 0);
> + rk_write_reg(PHY_TESTCLR, 1);
> + mdelay(10);
> + /* Pll locking */
> + rk_write_reg(PHY_TESTCLR, 0);
> + mdelay(10);
> +
> + /* config cp and lfp */
> + test_data[0] = 0x80 | (ddr_clk / (200*MHz)) << 3 | 0x3;
> + rk_mipi_phy_write(0x10, test_data, 1);
> +
> + test_data[0] = 0x8;
> + rk_mipi_phy_write(0x11, test_data, 1);
> +
> + test_data[0] = 0x80 | 0x40;
> + rk_mipi_phy_write(0x12, test_data, 1);
> +
> + /* select the suitable value for fsfreqrang reg */
> + for (i = 0; i < 39; i++) {
What is 39? Is is ARRAY_SIZE(rang)?
> + if (ddr_clk / (MHz) >= rang[i][0])
> + break;
> + }
> + test_data[0] = rang[i][1] << 1;
> + rk_mipi_phy_write(code_hs_rx_lane0, test_data, 1);
> + /*
> + * Calculate the best ddrclk and it's
> + * corresponding div value, If the given
> + * pixelclock is great than 250M, the ddr
> + * clk will be fix 1500M.otherwise , it's
> + * equal to ddr_clk= pixclk*6.
Can you use (say) 75 columns for this?
> + */
> + for (i = 1; i < 6; i++) {
> + if ((ddr_clk * i % refclk < remain) &&
> + (ddr_clk * i / refclk) < 512) {
> + prediv = i;
> + remain = ddr_clk * i % refclk;
> + }
> + }
> + fbdiv = ddr_clk * prediv / refclk;
> + ddr_clk = refclk * fbdiv / prediv;
> + mipi->phy_clk = ddr_clk;
> + /* config prediv and feedback reg */
> + test_data[0] = prediv - 1;
> + rk_mipi_phy_write(code_pll_input_div_rat, test_data, 1);
> + mdelay(2);
> + test_data[0] = (fbdiv - 1) & 0x1f;
> + rk_mipi_phy_write(code_pll_loop_div_rat, test_data, 1);
> + mdelay(2);
> + test_data[0] = (fbdiv - 1) >> 5 | 0x80;
> + rk_mipi_phy_write(code_pll_loop_div_rat, test_data, 1);
> + mdelay(2);
> + test_data[0] = 0x30;
> + rk_mipi_phy_write(code_pll_input_loop_div_rat, test_data, 1);
> + mdelay(2);
What are these long delays for? Please add a comment.
> +
> + /* rest config */
> + test_data[0] = 0x4d;
> + rk_mipi_phy_write(0x20, test_data, 1);
> +
> + test_data[0] = 0x3d;
> + rk_mipi_phy_write(0x21, test_data, 1);
> +
> + test_data[0] = 0xdf;
> + rk_mipi_phy_write(0x21, test_data, 1);
> +
> + test_data[0] = 0x7;
> + rk_mipi_phy_write(0x22, test_data, 1);
> +
> + test_data[0] = 0x80 | 0x7;
> + rk_mipi_phy_write(0x22, test_data, 1);
> +
> + test_data[0] = 0x80 | 15;
> + rk_mipi_phy_write(code_hstxdatalanerequsetstatetime,
> + test_data, 1);
> + test_data[0] = 0x80 | 85;
> + rk_mipi_phy_write(code_hstxdatalanepreparestatetime,
> + test_data, 1);
> + test_data[0] = 0x40 | 10;
> + rk_mipi_phy_write(code_hstxdatalanehszerostatetime,
> + test_data, 1);
> + /* enter into stop mode */
> + rk_write_reg(N_LANES, 0x03);
> + rk_write_reg(PHY_ENABLECLK, 1);
> + mdelay(10);
> + rk_write_reg(PHY_FORCEPLL, 1);
> + mdelay(10);
> + rk_write_reg(PHY_SHUTDOWNZ, 1);
> + mdelay(10);
> + rk_write_reg(PHY_RSTZ, 1);
> + mdelay(10);
> +
> + return 0;
> +}
> +
> +static int enable(struct udevice *dev, int panel_bpp,
> + const struct display_timing *timing)
> +{
> + struct udevice *panel;
> + /* Check if there are avalble panel */
> + if (uclass_first_device(UCLASS_PANEL, &panel)) {
I suppose you can pick the first panel, but can't you use the DT to
tell you which one?
See rk_lvds.c for what it does.
> + debug("No panel found@%s_LINE:%d\n", __func__, __LINE__);
> + return -EINVAL;
> + }
> + return panel_enable_backlight(panel);
> +}
> +
> +/*
> + * probe function: check panel existence and reading
> + * it's timing. then config mipi dsi controller and
> + * enable it according to the timing parameter
> + */
> +static int probe(struct udevice *dev)
Can you use rk_mipi_probe() etc. for these functions just to make them
more unique?
> +{
> + struct display_timing timing;
> + struct mipi_dsi mipi;
> +
> + /* Read panel timing,and save to struct timing */
> + rk_mipi_read_timing(dev, &timing);
> +
> + /* fill the mipi controller parameter */
> + mipi.ref_clk = 24*MHz;
> + mipi.sys_clk = mipi.ref_clk;
> + mipi.pix_clk = timing.pixelclock.typ;
> + mipi.phy_clk = mipi.pix_clk * 6;
> + mipi.txbyte_clk = mipi.phy_clk / 8;
> + mipi.txesc_clk = 20*MHz;
> +
> + /* config mipi dsi according to timing and enable it */
> + rk_mipi_dsi_enable(dev, &mipi, &timing);
Check error?
> +
> + /* init mipi dsi phy */
> + rk_mipi_phy_enable(&mipi);
Check error?
> +
> + return 0;
> +}
> +
> +static const struct dm_display_ops rk_mipi_dsi_ops = {
> + .read_timing = rk_mipi_read_timing,
> + .enable = enable,
> +};
> +
> +static const struct udevice_id rk_mipi_dsi_ids[] = {
> + { .compatible = "rockchip,rk3399_mipi_dsi" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(rk_mipi_dsi) = {
> + .name = "rk_mipi_dsi",
> + .id = UCLASS_DISPLAY,
> + .of_match = rk_mipi_dsi_ids,
> + .probe = probe,
> + .ops = &rk_mipi_dsi_ops,
> +};
> +
> diff --git a/drivers/video/rockchip/rk_vop.c b/drivers/video/rockchip/rk_vop.c
> index aeecb58..1de00f1 100644
> --- a/drivers/video/rockchip/rk_vop.c
> +++ b/drivers/video/rockchip/rk_vop.c
> @@ -109,6 +109,10 @@ void rkvop_mode_set(struct rk3288_vop *regs,
> clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN,
> V_HDMI_OUT_EN(1));
> break;
> + case VOP_MODE_MIPI:
> + clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN,
> + V_MIPI_OUT_EN(1));
> + break;
> case VOP_MODE_EDP:
> default:
> clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN,
> @@ -245,7 +249,7 @@ int rk_display_init(struct udevice *dev, ulong fbbase,
> ret = clk_get_by_index(dev, 1, &clk);
> if (!ret)
> ret = clk_set_rate(&clk, timing.pixelclock.typ);
> - if (ret) {
> + if (!ret) {
Why is this changing?
> debug("%s: Failed to set pixel clock: ret=%d\n", __func__, ret);
> return ret;
> }
> @@ -327,7 +331,7 @@ static int rk_vop_probe(struct udevice *dev)
> for (node = fdt_first_subnode(blob, port);
> node > 0;
> node = fdt_next_subnode(blob, node)) {
> - ret = rk_display_init(dev, plat->base, VIDEO_BPP16, node);
> + ret = rk_display_init(dev, plat->base, VIDEO_BPP32, node);
Maybe we need a way to select which depth to use?
> if (ret)
> debug("Device failed: ret=%d\n", ret);
> if (!ret)
> @@ -342,7 +346,7 @@ static int rk_vop_bind(struct udevice *dev)
> {
> struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
>
> - plat->size = 1920 * 1080 * 2;
> + plat->size = 1920 * 1200 * 4;
And it should probably calculate this, so HDMI continues to work.
>
> return 0;
> }
> @@ -351,6 +355,8 @@ static const struct video_ops rk_vop_ops = {
> };
>
> static const struct udevice_id rk_vop_ids[] = {
> + { .compatible = "rockchip,rk3399-vop-big" },
> + { .compatible = "rockchip,rk3399-vop-lit" },
> { .compatible = "rockchip,rk3288-vop" },
> { }
> };
> --
> 1.9.1
>
>
Regards,
Simon
^ permalink raw reply [flat|nested] 19+ messages in thread