[PATCH 00/10] Remove multiple uses of KERN_<level>

[PATCH 00/10] Remove multiple uses of KERN_<level>

[Joe Perches]

Found using strings vmlinux | grep "^<.>.*<.>"
and a couple of other cleanups of logging message format strings.

Joe Perches (10):
  arch/x86/kernel/apic/io_apic.c: Typo fix WARNING
  drivers/atm/eni.c: Remove multiple uses of KERN_<level>
  drivers/hid/hid-input.c: Remove KERN_DEBUG from dbg_hid use
  drivers/infiniband: Remove unnecessary KERN_<level> uses
  drivers/input/mouse/appletouch.c: Remove KERN_DEBUG use from dprintk
  drivers/input/serio/i8042: Use pr_<level>, pr_fmt.  Fix dbg and __FILE__ use
  drivers/media: Removed unnecessary KERN_<level>s from dprintk uses
  drivers/scsi:mvsas/mv_sas.c: Remove KERN_DEBUG from mv_dprintk use
  drivers/video/msm/mddi.c: Remove multiple KERN_<level> uses
  fs/proc/vmcore.c: Use pr_<level> and pr_<fmt>

 arch/x86/kernel/apic/io_apic.c                |    2 +-
 drivers/atm/eni.c                             |    7 +-
 drivers/hid/hid-input.c                       |    2 +-
 drivers/infiniband/hw/amso1100/c2_intr.c      |    4 +-
 drivers/infiniband/hw/cxgb3/iwch_cm.c         |    4 +-
 drivers/infiniband/hw/cxgb4/cm.c              |    4 +-
 drivers/input/mouse/appletouch.c              |    2 +-
 drivers/input/serio/i8042.c                   |   94 ++++++++++++-------------
 drivers/input/serio/i8042.h                   |   19 +++--
 drivers/media/common/tuners/max2165.c         |   10 +--
 drivers/media/dvb/frontends/atbm8830.c        |    8 +--
 drivers/media/dvb/frontends/lgs8gxx.c         |   11 +--
 drivers/media/video/saa7134/saa7134-input.c   |    2 +-
 drivers/media/video/saa7134/saa7134-tvaudio.c |   12 ++--
 drivers/scsi/mvsas/mv_sas.c                   |    2 +-
 drivers/video/msm/mddi.c                      |    5 +-
 fs/proc/vmcore.c                              |   16 ++---
 17 files changed, 97 insertions(+), 107 deletions(-)

-- 
1.7.3.dirty

[PATCH 00/10] Remove multiple uses of KERN_<level>

[Joe Perches]

Found using strings vmlinux | grep "^<.>.*<.>"
and a couple of other cleanups of logging message format strings.

Joe Perches (10):
  arch/x86/kernel/apic/io_apic.c: Typo fix WARNING
  drivers/atm/eni.c: Remove multiple uses of KERN_<level>
  drivers/hid/hid-input.c: Remove KERN_DEBUG from dbg_hid use
  drivers/infiniband: Remove unnecessary KERN_<level> uses
  drivers/input/mouse/appletouch.c: Remove KERN_DEBUG use from dprintk
  drivers/input/serio/i8042: Use pr_<level>, pr_fmt.  Fix dbg and __FILE__ use
  drivers/media: Removed unnecessary KERN_<level>s from dprintk uses
  drivers/scsi:mvsas/mv_sas.c: Remove KERN_DEBUG from mv_dprintk use
  drivers/video/msm/mddi.c: Remove multiple KERN_<level> uses
  fs/proc/vmcore.c: Use pr_<level> and pr_<fmt>

 arch/x86/kernel/apic/io_apic.c                |    2 +-
 drivers/atm/eni.c                             |    7 +-
 drivers/hid/hid-input.c                       |    2 +-
 drivers/infiniband/hw/amso1100/c2_intr.c      |    4 +-
 drivers/infiniband/hw/cxgb3/iwch_cm.c         |    4 +-
 drivers/infiniband/hw/cxgb4/cm.c              |    4 +-
 drivers/input/mouse/appletouch.c              |    2 +-
 drivers/input/serio/i8042.c                   |   94 ++++++++++++-------------
 drivers/input/serio/i8042.h                   |   19 +++--
 drivers/media/common/tuners/max2165.c         |   10 +--
 drivers/media/dvb/frontends/atbm8830.c        |    8 +--
 drivers/media/dvb/frontends/lgs8gxx.c         |   11 +--
 drivers/media/video/saa7134/saa7134-input.c   |    2 +-
 drivers/media/video/saa7134/saa7134-tvaudio.c |   12 ++--
 drivers/scsi/mvsas/mv_sas.c                   |    2 +-
 drivers/video/msm/mddi.c                      |    5 +-
 fs/proc/vmcore.c                              |   16 ++---
 17 files changed, 97 insertions(+), 107 deletions(-)

-- 
1.7.3.dirty

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 00/10] Remove multiple uses of KERN_<level>

[Joe Perches]

Found using strings vmlinux | grep "^<.>.*<.>"
and a couple of other cleanups of logging message format strings.

Joe Perches (10):
  arch/x86/kernel/apic/io_apic.c: Typo fix WARNING
  drivers/atm/eni.c: Remove multiple uses of KERN_<level>
  drivers/hid/hid-input.c: Remove KERN_DEBUG from dbg_hid use
  drivers/infiniband: Remove unnecessary KERN_<level> uses
  drivers/input/mouse/appletouch.c: Remove KERN_DEBUG use from dprintk
  drivers/input/serio/i8042: Use pr_<level>, pr_fmt.  Fix dbg and __FILE__ use
  drivers/media: Removed unnecessary KERN_<level>s from dprintk uses
  drivers/scsi:mvsas/mv_sas.c: Remove KERN_DEBUG from mv_dprintk use
  drivers/video/msm/mddi.c: Remove multiple KERN_<level> uses
  fs/proc/vmcore.c: Use pr_<level> and pr_<fmt>

 arch/x86/kernel/apic/io_apic.c                |    2 +-
 drivers/atm/eni.c                             |    7 +-
 drivers/hid/hid-input.c                       |    2 +-
 drivers/infiniband/hw/amso1100/c2_intr.c      |    4 +-
 drivers/infiniband/hw/cxgb3/iwch_cm.c         |    4 +-
 drivers/infiniband/hw/cxgb4/cm.c              |    4 +-
 drivers/input/mouse/appletouch.c              |    2 +-
 drivers/input/serio/i8042.c                   |   94 ++++++++++++-------------
 drivers/input/serio/i8042.h                   |   19 +++--
 drivers/media/common/tuners/max2165.c         |   10 +--
 drivers/media/dvb/frontends/atbm8830.c        |    8 +--
 drivers/media/dvb/frontends/lgs8gxx.c         |   11 +--
 drivers/media/video/saa7134/saa7134-input.c   |    2 +-
 drivers/media/video/saa7134/saa7134-tvaudio.c |   12 ++--
 drivers/scsi/mvsas/mv_sas.c                   |    2 +-
 drivers/video/msm/mddi.c                      |    5 +-
 fs/proc/vmcore.c                              |   16 ++---
 17 files changed, 97 insertions(+), 107 deletions(-)

-- 
1.7.3.dirty

[PATCH 01/10] arch/x86/kernel/apic/io_apic.c: Typo fix WARNING

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 arch/x86/kernel/apic/io_apic.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 8ae808d..4640f72 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -4037,7 +4037,7 @@ int mp_find_ioapic_pin(int ioapic, u32 gsi)
 static int bad_ioapic(unsigned long address)
 {
 	if (nr_ioapics >= MAX_IO_APICS) {
-		printk(KERN_WARNING "WARING: Max # of I/O APICs (%d) exceeded "
+		printk(KERN_WARNING "WARNING: Max # of I/O APICs (%d) exceeded "
 		       "(found %d), skipping\n", MAX_IO_APICS, nr_ioapics);
 		return 1;
 	}
-- 
1.7.3.dirty

[PATCH 02/10] drivers/atm/eni.c: Remove multiple uses of KERN_<level>

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/atm/eni.c |    7 ++++---
 1 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c
index 80f9f36..97c5898 100644
--- a/drivers/atm/eni.c
+++ b/drivers/atm/eni.c
@@ -1736,9 +1736,10 @@ static int __devinit eni_do_init(struct atm_dev *dev)
 		eprom = (base+EPROM_SIZE-sizeof(struct midway_eprom));
 		if (readl(&eprom->magic) != ENI155_MAGIC) {
 			printk("\n");
-			printk(KERN_ERR KERN_ERR DEV_LABEL "(itf %d): bad "
-			    "magic - expected 0x%x, got 0x%x\n",dev->number,
-			    ENI155_MAGIC,(unsigned) readl(&eprom->magic));
+			printk(KERN_ERR DEV_LABEL
+			       "(itf %d): bad magic - expected 0x%x, got 0x%x\n",
+			       dev->number, ENI155_MAGIC,
+			       (unsigned)readl(&eprom->magic));
 			error = -EINVAL;
 			goto unmap;
 		}
-- 
1.7.3.dirty

[PATCH 03/10] drivers/hid/hid-input.c: Remove KERN_DEBUG from dbg_hid use

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/hid/hid-input.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index bb0b365..3a1517a 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -174,7 +174,7 @@ static int hidinput_setkeycode(struct input_dev *dev,
 
 		clear_bit(*old_keycode, dev->keybit);
 		set_bit(usage->code, dev->keybit);
-		dbg_hid(KERN_DEBUG "Assigned keycode %d to HID usage code %x\n",
+		dbg_hid("Assigned keycode %d to HID usage code %x\n",
 			usage->code, usage->hid);
 
 		/*
-- 
1.7.3.dirty

[PATCH 04/10] drivers/infiniband: Remove unnecessary KERN_<level> uses

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/infiniband/hw/amso1100/c2_intr.c |    4 ++--
 drivers/infiniband/hw/cxgb3/iwch_cm.c    |    4 ++--
 drivers/infiniband/hw/cxgb4/cm.c         |    4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/infiniband/hw/amso1100/c2_intr.c b/drivers/infiniband/hw/amso1100/c2_intr.c
index 3b50954..0ebe4e8 100644
--- a/drivers/infiniband/hw/amso1100/c2_intr.c
+++ b/drivers/infiniband/hw/amso1100/c2_intr.c
@@ -62,8 +62,8 @@ void c2_rnic_interrupt(struct c2_dev *c2dev)
 static void handle_mq(struct c2_dev *c2dev, u32 mq_index)
 {
 	if (c2dev->qptr_array[mq_index] == NULL) {
-		pr_debug(KERN_INFO "handle_mq: stray activity for mq_index=%d\n",
-			mq_index);
+		pr_debug("handle_mq: stray activity for mq_index=%d\n",
+			 mq_index);
 		return;
 	}
 
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c
index 13c8887..d02dcc6 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c
@@ -1093,8 +1093,8 @@ static int tx_ack(struct t3cdev *tdev, struct sk_buff *skb, void *ctx)
 	PDBG("%s ep %p credits %u\n", __func__, ep, credits);
 
 	if (credits == 0) {
-		PDBG(KERN_ERR "%s 0 credit ack  ep %p state %u\n",
-			__func__, ep, state_read(&ep->com));
+		PDBG("%s 0 credit ack  ep %p state %u\n",
+		     __func__, ep, state_read(&ep->com));
 		return CPL_RET_BUF_DONE;
 	}
 
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 32d352a..8f812cf 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -1762,8 +1762,8 @@ static int fw4_ack(struct c4iw_dev *dev, struct sk_buff *skb)
 	ep = lookup_tid(t, tid);
 	PDBG("%s ep %p tid %u credits %u\n", __func__, ep, ep->hwtid, credits);
 	if (credits == 0) {
-		PDBG(KERN_ERR "%s 0 credit ack ep %p tid %u state %u\n",
-			__func__, ep, ep->hwtid, state_read(&ep->com));
+		PDBG("%s 0 credit ack ep %p tid %u state %u\n",
+		     __func__, ep, ep->hwtid, state_read(&ep->com));
 		return 0;
 	}
 
-- 
1.7.3.dirty

[PATCH 05/10] drivers/input/mouse/appletouch.c: Remove KERN_DEBUG use from dprintk

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/input/mouse/appletouch.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index a9cf768..b77f999 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -630,7 +630,7 @@ static void atp_complete_geyser_3_4(struct urb *urb)
 	/* Just update the base values (i.e. touchpad in untouched state) */
 	if (dev->data[dev->info->datalen - 1] & ATP_STATUS_BASE_UPDATE) {
 
-		dprintk(KERN_DEBUG "appletouch: updated base values\n");
+		dprintk("appletouch: updated base values\n");
 
 		memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
 		goto exit;
-- 
1.7.3.dirty

[PATCH 05/10] drivers/input/mouse/appletouch.c: Remove KERN_DEBUG use from dprintk

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/input/mouse/appletouch.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index a9cf768..b77f999 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -630,7 +630,7 @@ static void atp_complete_geyser_3_4(struct urb *urb)
 	/* Just update the base values (i.e. touchpad in untouched state) */
 	if (dev->data[dev->info->datalen - 1] & ATP_STATUS_BASE_UPDATE) {
 
-		dprintk(KERN_DEBUG "appletouch: updated base values\n");
+		dprintk("appletouch: updated base values\n");
 
 		memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
 		goto exit;
-- 
1.7.3.dirty

[PATCH 06/10] drivers/input/serio/i8042: Use pr_<level>, pr_fmt. Fix dbg and __FILE__ use

[Joe Perches]

Standardized message logging prefixes.
Removed \n from dbg macro, added \n to each dbg call site.
A couple of uses of dbg already had a \n.
Removed direct use of __FILE__ from dbg, converted to pr_fmt(fmt)
Added non-debug printf argument verification of dbg calls
Removed "i8042.c" from printks, converted to pr_<level>

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/input/serio/i8042.c |   94 ++++++++++++++++++++-----------------------
 drivers/input/serio/i8042.h |   19 +++++---
 2 files changed, 56 insertions(+), 57 deletions(-)

diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 18db5a8..61ef34a 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -10,6 +10,8 @@
  * the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/types.h>
 #include <linux/delay.h>
 #include <linux/module.h>
@@ -225,8 +227,8 @@ static int i8042_flush(void)
 		udelay(50);
 		data = i8042_read_data();
 		i++;
-		dbg("%02x <- i8042 (flush, %s)", data,
-			str & I8042_STR_AUXDATA ? "aux" : "kbd");
+		dbg("%02x <- i8042 (flush, %s)\n",
+		    data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
 	}
 
 	spin_unlock_irqrestore(&i8042_lock, flags);
@@ -253,32 +255,32 @@ static int __i8042_command(unsigned char *param, int command)
 	if (error)
 		return error;
 
-	dbg("%02x -> i8042 (command)", command & 0xff);
+	dbg("%02x -> i8042 (command)\n", command & 0xff);
 	i8042_write_command(command & 0xff);
 
 	for (i = 0; i < ((command >> 12) & 0xf); i++) {
 		error = i8042_wait_write();
 		if (error)
 			return error;
-		dbg("%02x -> i8042 (parameter)", param[i]);
+		dbg("%02x -> i8042 (parameter)\n", param[i]);
 		i8042_write_data(param[i]);
 	}
 
 	for (i = 0; i < ((command >> 8) & 0xf); i++) {
 		error = i8042_wait_read();
 		if (error) {
-			dbg("     -- i8042 (timeout)");
+			dbg("     -- i8042 (timeout)\n");
 			return error;
 		}
 
 		if (command == I8042_CMD_AUX_LOOP &&
 		    !(i8042_read_status() & I8042_STR_AUXDATA)) {
-			dbg("     -- i8042 (auxerr)");
+			dbg("     -- i8042 (auxerr)\n");
 			return -1;
 		}
 
 		param[i] = i8042_read_data();
-		dbg("%02x <- i8042 (return)", param[i]);
+		dbg("%02x <- i8042 (return)\n", param[i]);
 	}
 
 	return 0;
@@ -309,7 +311,7 @@ static int i8042_kbd_write(struct serio *port, unsigned char c)
 	spin_lock_irqsave(&i8042_lock, flags);
 
 	if (!(retval = i8042_wait_write())) {
-		dbg("%02x -> i8042 (kbd-data)", c);
+		dbg("%02x -> i8042 (kbd-data)\n", c);
 		i8042_write_data(c);
 	}
 
@@ -355,17 +357,14 @@ static void i8042_port_close(struct serio *serio)
 
 	i8042_ctr &= ~irq_bit;
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_WARNING
-			"i8042.c: Can't write CTR while closing %s port.\n",
-			port_name);
+		pr_warn("Can't write CTR while closing %s port\n", port_name);
 
 	udelay(50);
 
 	i8042_ctr &= ~disable_bit;
 	i8042_ctr |= irq_bit;
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_ERR "i8042.c: Can't reactivate %s port.\n",
-			port_name);
+		pr_err("Can't reactivate %s port\n", port_name);
 
 	/*
 	 * See if there is any data appeared while we were messing with
@@ -456,7 +455,8 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
 	str = i8042_read_status();
 	if (unlikely(~str & I8042_STR_OBF)) {
 		spin_unlock_irqrestore(&i8042_lock, flags);
-		if (irq) dbg("Interrupt %d, without any data", irq);
+		if (irq)
+			dbg("Interrupt %d, without any data\n", irq);
 		ret = 0;
 		goto out;
 	}
@@ -469,7 +469,8 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
 
 		dfl = 0;
 		if (str & I8042_STR_MUXERR) {
-			dbg("MUX error, status is %02x, data is %02x", str, data);
+			dbg("MUX error, status is %02x, data is %02x\n",
+			    str, data);
 /*
  * When MUXERR condition is signalled the data register can only contain
  * 0xfd, 0xfe or 0xff if implementation follows the spec. Unfortunately
@@ -512,7 +513,7 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
 	port = &i8042_ports[port_no];
 	serio = port->exists ? port->serio : NULL;
 
-	dbg("%02x <- i8042 (interrupt, %d, %d%s%s)",
+	dbg("%02x <- i8042 (interrupt, %d, %d%s%s)\n",
 	    data, port_no, irq,
 	    dfl & SERIO_PARITY ? ", bad parity" : "",
 	    dfl & SERIO_TIMEOUT ? ", timeout" : "");
@@ -540,7 +541,7 @@ static int i8042_enable_kbd_port(void)
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
 		i8042_ctr &= ~I8042_CTR_KBDINT;
 		i8042_ctr |= I8042_CTR_KBDDIS;
-		printk(KERN_ERR "i8042.c: Failed to enable KBD port.\n");
+		pr_err("Failed to enable KBD port\n");
 		return -EIO;
 	}
 
@@ -559,7 +560,7 @@ static int i8042_enable_aux_port(void)
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
 		i8042_ctr &= ~I8042_CTR_AUXINT;
 		i8042_ctr |= I8042_CTR_AUXDIS;
-		printk(KERN_ERR "i8042.c: Failed to enable AUX port.\n");
+		pr_err("Failed to enable AUX port\n");
 		return -EIO;
 	}
 
@@ -641,7 +642,7 @@ static int __init i8042_check_mux(void)
 	if (i8042_set_mux_mode(true, &mux_version))
 		return -1;
 
-	printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n",
+	pr_info("Detected active multiplexing controller, rev %d.%d\n",
 		(mux_version >> 4) & 0xf, mux_version & 0xf);
 
 /*
@@ -651,7 +652,7 @@ static int __init i8042_check_mux(void)
 	i8042_ctr &= ~I8042_CTR_AUXINT;
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_ERR "i8042.c: Failed to disable AUX port, can't use MUX.\n");
+		pr_err("Failed to disable AUX port, can't use MUX\n");
 		return -EIO;
 	}
 
@@ -676,8 +677,8 @@ static irqreturn_t __init i8042_aux_test_irq(int irq, void *dev_id)
 	str = i8042_read_status();
 	if (str & I8042_STR_OBF) {
 		data = i8042_read_data();
-		dbg("%02x <- i8042 (aux_test_irq, %s)",
-			data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
+		dbg("%02x <- i8042 (aux_test_irq, %s)\n",
+		    data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
 		if (i8042_irq_being_tested &&
 		    data == 0xa5 && (str & I8042_STR_AUXDATA))
 			complete(&i8042_aux_irq_delivered);
@@ -770,8 +771,8 @@ static int __init i8042_check_aux(void)
  */
 
 	if (i8042_toggle_aux(false)) {
-		printk(KERN_WARNING "Failed to disable AUX port, but continuing anyway... Is this a SiS?\n");
-		printk(KERN_WARNING "If AUX port is really absent please use the 'i8042.noaux' option.\n");
+		pr_warn("Failed to disable AUX port, but continuing anyway... Is this a SiS?\n");
+		pr_warn("If AUX port is really absent please use the 'i8042.noaux' option.\n");
 	}
 
 	if (i8042_toggle_aux(true))
@@ -819,7 +820,7 @@ static int __init i8042_check_aux(void)
  * AUX IRQ was never delivered so we need to flush the controller to
  * get rid of the byte we put there; otherwise keyboard may not work.
  */
-		dbg("     -- i8042 (aux irq test timeout)");
+		dbg("     -- i8042 (aux irq test timeout)\n");
 		i8042_flush();
 		retval = -1;
 	}
@@ -845,7 +846,7 @@ static int __init i8042_check_aux(void)
 static int i8042_controller_check(void)
 {
 	if (i8042_flush() == I8042_BUFFER_SIZE) {
-		printk(KERN_ERR "i8042.c: No controller found.\n");
+		pr_err("No controller found\n");
 		return -ENODEV;
 	}
 
@@ -864,15 +865,15 @@ static int i8042_controller_selftest(void)
 	do {
 
 		if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
-			printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
+			pr_err("i8042 controller self test timeout\n");
 			return -ENODEV;
 		}
 
 		if (param == I8042_RET_CTL_TEST)
 			return 0;
 
-		printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
-			param, I8042_RET_CTL_TEST);
+		pr_err("i8042 controller selftest failed. (%#x != %#x)\n",
+		       param, I8042_RET_CTL_TEST);
 		msleep(50);
 	} while (i++ < 5);
 
@@ -883,8 +884,7 @@ static int i8042_controller_selftest(void)
 	 * and user will still get a working keyboard. This is especially
 	 * important on netbooks. On other arches we trust hardware more.
 	 */
-	printk(KERN_INFO
-		"i8042: giving up on controller selftest, continuing anyway...\n");
+	pr_info("giving up on controller selftest, continuing anyway...\n");
 	return 0;
 #else
 	return -EIO;
@@ -909,8 +909,7 @@ static int i8042_controller_init(void)
 
 	do {
 		if (n >= 10) {
-			printk(KERN_ERR
-				"i8042.c: Unable to get stable CTR read.\n");
+			pr_err("Unable to get stable CTR read\n");
 			return -EIO;
 		}
 
@@ -918,8 +917,7 @@ static int i8042_controller_init(void)
 			udelay(50);
 
 		if (i8042_command(&ctr[n++ % 2], I8042_CMD_CTL_RCTR)) {
-			printk(KERN_ERR
-				"i8042.c: Can't read CTR while initializing i8042.\n");
+			pr_err("Can't read CTR while initializing i8042\n");
 			return -EIO;
 		}
 
@@ -943,7 +941,7 @@ static int i8042_controller_init(void)
 		if (i8042_unlock)
 			i8042_ctr |= I8042_CTR_IGNKEYLOCK;
 		else
-			printk(KERN_WARNING "i8042.c: Warning: Keylock active.\n");
+			pr_warn("Warning: Keylock active\n");
 	}
 	spin_unlock_irqrestore(&i8042_lock, flags);
 
@@ -970,7 +968,7 @@ static int i8042_controller_init(void)
  */
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_ERR "i8042.c: Can't write CTR while initializing i8042.\n");
+		pr_err("Can't write CTR while initializing i8042\n");
 		return -EIO;
 	}
 
@@ -1000,7 +998,7 @@ static void i8042_controller_reset(void)
 	i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT);
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_WARNING "i8042.c: Can't write CTR while resetting.\n");
+		pr_warn("Can't write CTR while resetting\n");
 
 /*
  * Disable MUX mode if present.
@@ -1021,7 +1019,7 @@ static void i8042_controller_reset(void)
  */
 
 	if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_WARNING "i8042.c: Can't restore CTR.\n");
+		pr_warn("Can't restore CTR\n");
 }
 
 
@@ -1045,14 +1043,14 @@ static long i8042_panic_blink(int state)
 	led = (state) ? 0x01 | 0x04 : 0;
 	while (i8042_read_status() & I8042_STR_IBF)
 		DELAY;
-	dbg("%02x -> i8042 (panic blink)", 0xed);
+	dbg("%02x -> i8042 (panic blink)\n", 0xed);
 	i8042_suppress_kbd_ack = 2;
 	i8042_write_data(0xed); /* set leds */
 	DELAY;
 	while (i8042_read_status() & I8042_STR_IBF)
 		DELAY;
 	DELAY;
-	dbg("%02x -> i8042 (panic blink)", led);
+	dbg("%02x -> i8042 (panic blink)\n", led);
 	i8042_write_data(led);
 	DELAY;
 	return delay;
@@ -1068,9 +1066,7 @@ static void i8042_dritek_enable(void)
 
 	error = i8042_command(&param, 0x1059);
 	if (error)
-		printk(KERN_WARNING
-			"Failed to enable DRITEK extension: %d\n",
-			error);
+		pr_warn("Failed to enable DRITEK extension: %d\n", error);
 }
 #endif
 
@@ -1105,10 +1101,10 @@ static int i8042_controller_resume(bool force_reset)
 	i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS;
 	i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT);
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_WARNING "i8042: Can't write CTR to resume, retrying...\n");
+		pr_warn("Can't write CTR to resume, retrying...\n");
 		msleep(50);
 		if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-			printk(KERN_ERR "i8042: CTR write retry failed\n");
+			pr_err("CTR write retry failed\n");
 			return -EIO;
 		}
 	}
@@ -1121,9 +1117,7 @@ static int i8042_controller_resume(bool force_reset)
 
 	if (i8042_mux_present) {
 		if (i8042_set_mux_mode(true, NULL) || i8042_enable_mux_ports())
-			printk(KERN_WARNING
-				"i8042: failed to resume active multiplexor, "
-				"mouse won't work.\n");
+			pr_warn("failed to resume active multiplexor, mouse won't work\n");
 	} else if (i8042_ports[I8042_AUX_PORT_NO].serio)
 		i8042_enable_aux_port();
 
@@ -1268,7 +1262,7 @@ static void __init i8042_register_ports(void)
 
 	for (i = 0; i < I8042_NUM_PORTS; i++) {
 		if (i8042_ports[i].serio) {
-			printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n",
+			pr_info("%s at %#lx,%#lx irq %d\n",
 				i8042_ports[i].serio->name,
 				(unsigned long) I8042_DATA_REG,
 				(unsigned long) I8042_COMMAND_REG,
diff --git a/drivers/input/serio/i8042.h b/drivers/input/serio/i8042.h
index cbc1beb..f510950 100644
--- a/drivers/input/serio/i8042.h
+++ b/drivers/input/serio/i8042.h
@@ -89,15 +89,20 @@
 #ifdef DEBUG
 static unsigned long i8042_start_time;
 #define dbg_init() do { i8042_start_time = jiffies; } while (0)
-#define dbg(format, arg...) 							\
-	do { 									\
-		if (i8042_debug)						\
-			printk(KERN_DEBUG __FILE__ ": " format " [%d]\n" ,	\
-	 			## arg, (int) (jiffies - i8042_start_time));	\
-	} while (0)
+#define dbg(format, arg...)						\
+do {									\
+	if (i8042_debug)						\
+		printk(KERN_DEBUG pr_fmt(format "[%d]"),		\
+		       ##arg, (int)(jiffies - i8042_start_time));	\
+} while (0)
+
 #else
 #define dbg_init() do { } while (0)
-#define dbg(format, arg...) do {} while (0)
+#define dbg(format, arg...)						\
+do {									\
+	if (0)								\
+		printk(KERN_DEBUG pr_fmt(format), ##arg);		\
+} while (0)
 #endif
 
 #endif /* _I8042_H */
-- 
1.7.3.dirty

[PATCH 07/10] drivers/media: Removed unnecessary KERN_<level>s from dprintk uses

[Joe Perches]

Converted if (debug >= 2) printk(KERN_DEBUG... to if debug >= 2) dprintk(...)

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/media/common/tuners/max2165.c         |   10 ++++------
 drivers/media/dvb/frontends/atbm8830.c        |    8 +++-----
 drivers/media/dvb/frontends/lgs8gxx.c         |   11 ++++-------
 drivers/media/video/saa7134/saa7134-input.c   |    2 +-
 drivers/media/video/saa7134/saa7134-tvaudio.c |   12 ++++++------
 5 files changed, 18 insertions(+), 25 deletions(-)

diff --git a/drivers/media/common/tuners/max2165.c b/drivers/media/common/tuners/max2165.c
index 937e4b0..9883617 100644
--- a/drivers/media/common/tuners/max2165.c
+++ b/drivers/media/common/tuners/max2165.c
@@ -52,13 +52,12 @@ static int max2165_write_reg(struct max2165_priv *priv, u8 reg, u8 data)
 	msg.addr = priv->config->i2c_address;
 
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%02X, data=0x%02X\n",
-			__func__, reg, data);
+		dprintk("%s: reg=0x%02X, data=0x%02X\n", __func__, reg, data);
 
 	ret = i2c_transfer(priv->i2c, &msg, 1);
 
 	if (ret != 1)
-		dprintk(KERN_DEBUG "%s: error reg=0x%x, data=0x%x, ret=%i\n",
+		dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n",
 			__func__, reg, data, ret);
 
 	return (ret != 1) ? -EIO : 0;
@@ -78,14 +77,13 @@ static int max2165_read_reg(struct max2165_priv *priv, u8 reg, u8 *p_data)
 
 	ret = i2c_transfer(priv->i2c, msg, 2);
 	if (ret != 2) {
-		dprintk(KERN_DEBUG "%s: error reg=0x%x, ret=%i\n",
-			__func__, reg, ret);
+		dprintk("%s: error reg=0x%x, ret=%i\n", __func__, reg, ret);
 		return -EIO;
 	}
 
 	*p_data = b1[0];
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%02X, data=0x%02X\n",
+		dprintk("%s: reg=0x%02X, data=0x%02X\n",
 			__func__, reg, b1[0]);
 	return 0;
 }
diff --git a/drivers/media/dvb/frontends/atbm8830.c b/drivers/media/dvb/frontends/atbm8830.c
index 43aac2f..1539ea1 100644
--- a/drivers/media/dvb/frontends/atbm8830.c
+++ b/drivers/media/dvb/frontends/atbm8830.c
@@ -50,8 +50,7 @@ static int atbm8830_write_reg(struct atbm_state *priv, u16 reg, u8 data)
 	msg2.addr = dev_addr;
 
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%04X, data=0x%02X\n",
-			__func__, reg, data);
+		dprintk("%s: reg=0x%04X, data=0x%02X\n", __func__, reg, data);
 
 	ret = i2c_transfer(priv->i2c, &msg1, 1);
 	if (ret != 1)
@@ -77,8 +76,7 @@ static int atbm8830_read_reg(struct atbm_state *priv, u16 reg, u8 *p_data)
 
 	ret = i2c_transfer(priv->i2c, &msg1, 1);
 	if (ret != 1) {
-		dprintk(KERN_DEBUG "%s: error reg=0x%04x, ret=%i\n",
-			__func__, reg, ret);
+		dprintk("%s: error reg=0x%04x, ret=%i\n", __func__, reg, ret);
 		return -EIO;
 	}
 
@@ -88,7 +86,7 @@ static int atbm8830_read_reg(struct atbm_state *priv, u16 reg, u8 *p_data)
 
 	*p_data = buf2[0];
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%04X, data=0x%02X\n",
+		dprintk("%s: reg=0x%04X, data=0x%02X\n",
 			__func__, reg, buf2[0]);
 
 	return 0;
diff --git a/drivers/media/dvb/frontends/lgs8gxx.c b/drivers/media/dvb/frontends/lgs8gxx.c
index 5ea28ae..8989f8f 100644
--- a/drivers/media/dvb/frontends/lgs8gxx.c
+++ b/drivers/media/dvb/frontends/lgs8gxx.c
@@ -60,13 +60,12 @@ static int lgs8gxx_write_reg(struct lgs8gxx_state *priv, u8 reg, u8 data)
 		msg.addr += 0x02;
 
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%02X, data=0x%02X\n",
-			__func__, reg, data);
+		dprintk("%s: reg=0x%02X, data=0x%02X\n", __func__, reg, data);
 
 	ret = i2c_transfer(priv->i2c, &msg, 1);
 
 	if (ret != 1)
-		dprintk(KERN_DEBUG "%s: error reg=0x%x, data=0x%x, ret=%i\n",
+		dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n",
 			__func__, reg, data, ret);
 
 	return (ret != 1) ? -1 : 0;
@@ -91,15 +90,13 @@ static int lgs8gxx_read_reg(struct lgs8gxx_state *priv, u8 reg, u8 *p_data)
 
 	ret = i2c_transfer(priv->i2c, msg, 2);
 	if (ret != 2) {
-		dprintk(KERN_DEBUG "%s: error reg=0x%x, ret=%i\n",
-			__func__, reg, ret);
+		dprintk("%s: error reg=0x%x, ret=%i\n", __func__, reg, ret);
 		return -1;
 	}
 
 	*p_data = b1[0];
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%02X, data=0x%02X\n",
-			__func__, reg, b1[0]);
+		dprintk("%s: reg=0x%02X, data=0x%02X\n", __func__, reg, b1[0]);
 	return 0;
 }
 
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 0b336ca..f81a19f 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -965,7 +965,7 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
 		   an existing device. Weird...
 		   REVISIT: might no longer be needed */
 		rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1);
-		dprintk(KERN_DEBUG "probe 0x%02x @ %s: %s\n",
+		dprintk("probe 0x%02x @ %s: %s\n",
 			msg_msi.addr, dev->i2c_adap.name,
 			(1 == rc) ? "yes" : "no");
 		break;
diff --git a/drivers/media/video/saa7134/saa7134-tvaudio.c b/drivers/media/video/saa7134/saa7134-tvaudio.c
index 3e7d2fd..57e646b 100644
--- a/drivers/media/video/saa7134/saa7134-tvaudio.c
+++ b/drivers/media/video/saa7134/saa7134-tvaudio.c
@@ -550,16 +550,16 @@ static int tvaudio_thread(void *data)
 		} else if (0 != dev->last_carrier) {
 			/* no carrier -- try last detected one as fallback */
 			carrier = dev->last_carrier;
-			dprintk(KERN_WARNING "%s/audio: audio carrier scan failed, "
-			       "using %d.%03d MHz [last detected]\n",
-			       dev->name, carrier/1000, carrier%1000);
+			dprintk("audio carrier scan failed, "
+				"using %d.%03d MHz [last detected]\n",
+				carrier/1000, carrier%1000);
 
 		} else {
 			/* no carrier + no fallback -- use default */
 			carrier = default_carrier;
-			dprintk(KERN_WARNING "%s/audio: audio carrier scan failed, "
-			       "using %d.%03d MHz [default]\n",
-			       dev->name, carrier/1000, carrier%1000);
+			dprintk("audio carrier scan failed, "
+				"using %d.%03d MHz [default]\n",
+				carrier/1000, carrier%1000);
 		}
 		tvaudio_setcarrier(dev,carrier,carrier);
 		dev->automute = 0;
-- 
1.7.3.dirty

[PATCH 08/10] drivers/scsi:mvsas/mv_sas.c: Remove KERN_DEBUG from mv_dprintk use

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/scsi/mvsas/mv_sas.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c
index adedaa9..f8bed25 100644
--- a/drivers/scsi/mvsas/mv_sas.c
+++ b/drivers/scsi/mvsas/mv_sas.c
@@ -1698,7 +1698,7 @@ int mvs_abort_task(struct sas_task *task)
 			struct task_status_struct *tstat;
 			u32 slot_idx = (u32)(slot - mvi->slot_info);
 			tstat = &task->task_status;
-			mv_dprintk(KERN_DEBUG "mv_abort_task() mvi=%p task=%p "
+			mv_dprintk("mv_abort_task() mvi=%p task=%p "
 				   "slot=%p slot_idx=x%x\n",
 				   mvi, task, slot, slot_idx);
 			tstat->stat = SAS_ABORTED_TASK;
-- 
1.7.3.dirty

[PATCH 09/10] drivers/video/msm/mddi.c: Remove multiple KERN_<level> uses

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/video/msm/mddi.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/video/msm/mddi.c b/drivers/video/msm/mddi.c
index 7c316c3..b66d86a 100644
--- a/drivers/video/msm/mddi.c
+++ b/drivers/video/msm/mddi.c
@@ -318,7 +318,7 @@ static long mddi_wait_interrupt_timeout(struct mddi_info *mddi,
 static void mddi_wait_interrupt(struct mddi_info *mddi, uint32_t intmask)
 {
 	if (mddi_wait_interrupt_timeout(mddi, intmask, HZ/10) == 0)
-		printk(KERN_INFO KERN_ERR "mddi_wait_interrupt %d, timeout "
+		printk(KERN_INFO "mddi_wait_interrupt %d, timeout "
 		       "waiting for %x, INT = %x, STAT = %x gotint = %x\n",
 		       current->pid, intmask, mddi_readl(INT), mddi_readl(STAT),
 		       mddi->got_int);
@@ -465,8 +465,7 @@ static int __init mddi_get_client_caps(struct mddi_info *mddi)
 
 		if (mddi->flags & FLAG_HAVE_CAPS)
 			break;
-		printk(KERN_INFO KERN_ERR "mddi_init, timeout waiting for "
-				"caps\n");
+		printk(KERN_INFO "mddi_init, timeout waiting for caps\n");
 	}
 	return mddi->flags & FLAG_HAVE_CAPS;
 }
-- 
1.7.3.dirty

[PATCH 10/10] fs/proc/vmcore.c: Use pr_<level> and pr_<fmt>

[Joe Perches]

Added #define pr_fmt(fmt) "kdump: " fmt
Converted printk(KERN_WARNING...) to pr_warn(...) adding
the "kdump: " prefix.
Converted "is notsane" to "is not sane" to match other uses.

Signed-off-by: Joe Perches <joe@perches.com>
---
 fs/proc/vmcore.c |   16 +++++++---------
 1 files changed, 7 insertions(+), 9 deletions(-)

diff --git a/fs/proc/vmcore.c b/fs/proc/vmcore.c
index 2367fb3..a46a962 100644
--- a/fs/proc/vmcore.c
+++ b/fs/proc/vmcore.c
@@ -7,6 +7,8 @@
  *
  */
 
+#define pr_fmt(fmt) "kdump: " fmt
+
 #include <linux/mm.h>
 #include <linux/proc_fs.h>
 #include <linux/user.h>
@@ -506,8 +508,7 @@ static int __init parse_crash_elf64_headers(void)
 		ehdr.e_ehsize != sizeof(Elf64_Ehdr) ||
 		ehdr.e_phentsize != sizeof(Elf64_Phdr) ||
 		ehdr.e_phnum == 0) {
-		printk(KERN_WARNING "Warning: Core image elf header is not"
-					"sane\n");
+		pr_warn("Warning: Core image elf header is not sane\n");
 		return -EINVAL;
 	}
 
@@ -562,8 +563,7 @@ static int __init parse_crash_elf32_headers(void)
 		ehdr.e_ehsize != sizeof(Elf32_Ehdr) ||
 		ehdr.e_phentsize != sizeof(Elf32_Phdr) ||
 		ehdr.e_phnum == 0) {
-		printk(KERN_WARNING "Warning: Core image elf header is not"
-					"sane\n");
+		pr_warn("Warning: Core image elf header is not sane\n");
 		return -EINVAL;
 	}
 
@@ -606,8 +606,7 @@ static int __init parse_crash_elf_headers(void)
 	if (rc < 0)
 		return rc;
 	if (memcmp(e_ident, ELFMAG, SELFMAG) != 0) {
-		printk(KERN_WARNING "Warning: Core image elf header"
-					" not found\n");
+		pr_warn("Warning: Core image elf header not found\n");
 		return -EINVAL;
 	}
 
@@ -626,8 +625,7 @@ static int __init parse_crash_elf_headers(void)
 		/* Determine vmcore size. */
 		vmcore_size = get_vmcore_size_elf32(elfcorebuf);
 	} else {
-		printk(KERN_WARNING "Warning: Core image elf header is not"
-					" sane\n");
+		pr_warn("Warning: Core image elf header is not sane\n");
 		return -EINVAL;
 	}
 	return 0;
@@ -643,7 +641,7 @@ static int __init vmcore_init(void)
 		return rc;
 	rc = parse_crash_elf_headers();
 	if (rc) {
-		printk(KERN_WARNING "Kdump: vmcore not initialized\n");
+		pr_warn("vmcore not initialized\n");
 		return rc;
 	}
 
-- 
1.7.3.dirty

Re: [PATCH 01/10] arch/x86/kernel/apic/io_apic.c: Typo fix WARNING

[Ingo Molnar]

* Joe Perches <joe@perches.com> wrote:

> Signed-off-by: Joe Perches <joe@perches.com>
> ---
>  arch/x86/kernel/apic/io_apic.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
> index 8ae808d..4640f72 100644
> --- a/arch/x86/kernel/apic/io_apic.c
> +++ b/arch/x86/kernel/apic/io_apic.c
> @@ -4037,7 +4037,7 @@ int mp_find_ioapic_pin(int ioapic, u32 gsi)
>  static int bad_ioapic(unsigned long address)
>  {
>  	if (nr_ioapics >= MAX_IO_APICS) {
> -		printk(KERN_WARNING "WARING: Max # of I/O APICs (%d) exceeded "
> +		printk(KERN_WARNING "WARNING: Max # of I/O APICs (%d) exceeded "
>  		       "(found %d), skipping\n", MAX_IO_APICS, nr_ioapics);

While you are touching this please fix the other glaring problem this printk has.

Thanks,

	Ingo

Re: [PATCH 01/10] arch/x86/kernel/apic/io_apic.c: Typo fix WARNING

[Joe Perches]

On Tue, 26 Oct 2010, Ingo Molnar wrote:
> >  arch/x86/kernel/apic/io_apic.c |    2 +-
> > -		printk(KERN_WARNING "WARING: Max # of I/O APICs (%d) exceeded "
> > +		printk(KERN_WARNING "WARNING: Max # of I/O APICs (%d) exceeded "
> >  		       "(found %d), skipping\n", MAX_IO_APICS, nr_ioapics);
> While you are touching this please fix the other glaring problem this printk has.

There are 14 of these split lines formats in io_apic.c,
19 in apic and 1 in x2apic_uv_x.c.

There are also many apic_printk calls without KERN_<level>.

I prefer changing all of them at the same time rather
than 1 at a time.

Re: [PATCH 04/10] drivers/infiniband: Remove unnecessary KERN_<level> uses

[Steve Wise]

On 10/25/2010 9:44 PM, Joe Perches wrote:
> Signed-off-by: Joe Perches<joe-6d6DIl74uiNBDgjK7y7TUQ@public.gmane.org>
> ---
>   drivers/infiniband/hw/amso1100/c2_intr.c |    4 ++--
>   drivers/infiniband/hw/cxgb3/iwch_cm.c    |    4 ++--
>   drivers/infiniband/hw/cxgb4/cm.c         |    4 ++--
>   3 files changed, 6 insertions(+), 6 deletions(-)
>

Acked-by: Steve Wise <swise-7bPotxP6k4+P2YhJcF5u+vpXobYPEAuW@public.gmane.org>

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 04/10] drivers/infiniband: Remove unnecessary KERN_<level> uses

[Steve Wise]

On 10/25/2010 9:44 PM, Joe Perches wrote:
> Signed-off-by: Joe Perches<joe@perches.com>
> ---
>   drivers/infiniband/hw/amso1100/c2_intr.c |    4 ++--
>   drivers/infiniband/hw/cxgb3/iwch_cm.c    |    4 ++--
>   drivers/infiniband/hw/cxgb4/cm.c         |    4 ++--
>   3 files changed, 6 insertions(+), 6 deletions(-)
>

Acked-by: Steve Wise <swise@opengridcomputing.com>

Re: [PATCH 06/10] drivers/input/serio/i8042: Use pr_<level>, pr_fmt. Fix dbg and __FILE__ use

[Dmitry Torokhov]

Hi Joe,

On Mon, Oct 25, 2010 at 07:44:24PM -0700, Joe Perches wrote:
> Standardized message logging prefixes.
> Removed \n from dbg macro, added \n to each dbg call site.

Did you test it? It looks for call like:

> +             dbg("%02x <- i8042 (flush, %s)\n",
> +                 data, str & I8042_STR_AUXDATA ? "aux" : "kbd");

the result will be:

printk(KERN_DEBUG "i8042: %02x <- i8042 (flush, %s)\n [%d]", ...)

which is not exactly what you want...

>  
> @@ -1268,7 +1262,7 @@ static void __init i8042_register_ports(void)
>  
>  	for (i = 0; i < I8042_NUM_PORTS; i++) {
>  		if (i8042_ports[i].serio) {
> -			printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n",
> +			pr_info("%s at %#lx,%#lx irq %d\n",
>  				i8042_ports[i].serio->name,
>  				(unsigned long) I8042_DATA_REG,
>  				(unsigned long) I8042_COMMAND_REG,

Not quite equivalent conversion, right now every port is registered with
message "serio: XXX at YYY". I would be OK with having driver prefix
going in front but I'd like to keep word serio in (like "i8042: serio
XXX at YYY").

Thanks.

-- 
Dmitry

Re: [PATCH 05/10] drivers/input/mouse/appletouch.c: Remove KERN_DEBUG use from dprintk

[Dmitry Torokhov]

On Mon, Oct 25, 2010 at 07:44:23PM -0700, Joe Perches wrote:
> Signed-off-by: Joe Perches <joe@perches.com>

Applied, thanks Joe.

> ---
>  drivers/input/mouse/appletouch.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
> index a9cf768..b77f999 100644
> --- a/drivers/input/mouse/appletouch.c
> +++ b/drivers/input/mouse/appletouch.c
> @@ -630,7 +630,7 @@ static void atp_complete_geyser_3_4(struct urb *urb)
>  	/* Just update the base values (i.e. touchpad in untouched state) */
>  	if (dev->data[dev->info->datalen - 1] & ATP_STATUS_BASE_UPDATE) {
>  
> -		dprintk(KERN_DEBUG "appletouch: updated base values\n");
> +		dprintk("appletouch: updated base values\n");
>  
>  		memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
>  		goto exit;
> -- 
> 1.7.3.dirty
> 

-- 
Dmitry

Re: [PATCH 05/10] drivers/input/mouse/appletouch.c: Remove KERN_DEBUG use from dprintk

[Dmitry Torokhov]

On Mon, Oct 25, 2010 at 07:44:23PM -0700, Joe Perches wrote:
> Signed-off-by: Joe Perches <joe@perches.com>

Applied, thanks Joe.

> ---
>  drivers/input/mouse/appletouch.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
> index a9cf768..b77f999 100644
> --- a/drivers/input/mouse/appletouch.c
> +++ b/drivers/input/mouse/appletouch.c
> @@ -630,7 +630,7 @@ static void atp_complete_geyser_3_4(struct urb *urb)
>  	/* Just update the base values (i.e. touchpad in untouched state) */
>  	if (dev->data[dev->info->datalen - 1] & ATP_STATUS_BASE_UPDATE) {
>  
> -		dprintk(KERN_DEBUG "appletouch: updated base values\n");
> +		dprintk("appletouch: updated base values\n");
>  
>  		memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
>  		goto exit;
> -- 
> 1.7.3.dirty
> 

-- 
Dmitry

Re: [PATCH 04/10] drivers/infiniband: Remove unnecessary KERN_<level> uses

[Roland Dreier]

I seemed to already have the amso1100 part, but I picked up the
cxgb3/cxgb4 parts.

 - R.
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 04/10] drivers/infiniband: Remove unnecessary KERN_<level> uses

[Roland Dreier]

I seemed to already have the amso1100 part, but I picked up the
cxgb3/cxgb4 parts.

 - R.

Re: [PATCH 06/10] drivers/input/serio/i8042: Use pr_<level>, pr_fmt. Fix dbg and __FILE__ use

[Joe Perches]

On Tue, 2010-10-26 at 08:50 -0700, Dmitry Torokhov wrote:
> Hi Joe,

Hi Dmitry.

> On Mon, Oct 25, 2010 at 07:44:24PM -0700, Joe Perches wrote:
> > Standardized message logging prefixes.
> > Removed \n from dbg macro, added \n to each dbg call site.
> Did you test it? It looks for call like:
> > +             dbg("%02x <- i8042 (flush, %s)\n",
> > +                 data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
> the result will be:
> printk(KERN_DEBUG "i8042: %02x <- i8042 (flush, %s)\n [%d]", ...)
> which is not exactly what you want...

Right.  My mistake.
I compile tested only and didn't notice the badly formed string.

Mind if I move the time to the front like this?

+#define dbg(format, arg...)                                            \
+do {									\
+	if (i8042_debug)						\
+		printk(KERN_DEBUG KBUILD_MODNAME ": [%d]" format),	\
+                      (int)(jiffies - i8042_start_time), ##arg);	\
+} while (0)

> >  
> > @@ -1268,7 +1262,7 @@ static void __init i8042_register_ports(void)
> >  
> >  	for (i = 0; i < I8042_NUM_PORTS; i++) {
> >  		if (i8042_ports[i].serio) {
> > -			printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n",
> > +			pr_info("%s at %#lx,%#lx irq %d\n",
> >  				i8042_ports[i].serio->name,
> >  				(unsigned long) I8042_DATA_REG,
> >  				(unsigned long) I8042_COMMAND_REG,
> 
> Not quite equivalent conversion, right now every port is registered with
> message "serio: XXX at YYY". I would be OK with having driver prefix
> going in front but I'd like to keep word serio in (like "i8042: serio
> XXX at YYY").

I'll resubmit a pr_<level> series for drivers/input/serio
today/tomorrow with this change.

cheers, Joe

Re: [PATCH 06/10] drivers/input/serio/i8042: Use pr_<level>, pr_fmt. Fix dbg and __FILE__ use

[Dmitry Torokhov]

On Tuesday, October 26, 2010 04:25:31 pm Joe Perches wrote:
> On Tue, 2010-10-26 at 08:50 -0700, Dmitry Torokhov wrote:
> > Hi Joe,
> 
> Hi Dmitry.
> 
> > On Mon, Oct 25, 2010 at 07:44:24PM -0700, Joe Perches wrote:
> > > Standardized message logging prefixes.
> > > Removed \n from dbg macro, added \n to each dbg call site.
> > 
> > Did you test it? It looks for call like:
> > > +             dbg("%02x <- i8042 (flush, %s)\n",
> > > +                 data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
> > 
> > the result will be:
> > printk(KERN_DEBUG "i8042: %02x <- i8042 (flush, %s)\n [%d]", ...)
> > which is not exactly what you want...
> 
> Right.  My mistake.
> I compile tested only and didn't notice the badly formed string.
> 
> Mind if I move the time to the front like this?
> 
> +#define dbg(format, arg...)                                            \
> +do {									\
> +	if (i8042_debug)						\
> +		printk(KERN_DEBUG KBUILD_MODNAME ": [%d]" format),	\
> +                      (int)(jiffies - i8042_start_time), ##arg);	\
> +} while (0)

Another option would be to leave '\n' in dbg() and leave most of the
callers as is.

Thanks.

-- 
Dmitry

Re: [PATCH 06/10] drivers/input/serio/i8042: Use pr_<level>, pr_fmt. Fix dbg and __FILE__ use

[Joe Perches]

On Tue, 2010-10-26 at 17:40 -0700, Dmitry Torokhov wrote:
> > Mind if I move the time to the front like this?
> > +#define dbg(format, arg...)                                            \
> > +do {									\
> > +	if (i8042_debug)						\
> > +		printk(KERN_DEBUG KBUILD_MODNAME ": [%d]" format),	\
> > +                      (int)(jiffies - i8042_start_time), ##arg);	\
> > +} while (0)
> Another option would be to leave '\n' in dbg() and leave most of the
> callers as is.

That's really error prone though.

Re: [PATCH 06/10] drivers/input/serio/i8042: Use pr_<level>, pr_fmt. Fix dbg and __FILE__ use

[Dmitry Torokhov]

On Oct 26, 2010, at 5:46 PM, Joe Perches <joe@perches.com> wrote:

> On Tue, 2010-10-26 at 17:40 -0700, Dmitry Torokhov wrote:
>>> Mind if I move the time to the front like this?
>>> +#define dbg(format, arg...)                                            \
>>> +do {                                    \
>>> +    if (i8042_debug)                        \
>>> +        printk(KERN_DEBUG KBUILD_MODNAME ": [%d]" format),    \
>>> +                      (int)(jiffies - i8042_start_time), ##arg);    \
>>> +} while (0)
>> Another option would be to leave '\n' in dbg() and leave most of the
>> callers as is.
> 
> That's really error prone though.
> 

In what way?

-- 
Dmitry

Re: [PATCH 06/10] drivers/input/serio/i8042: Use pr_<level>, pr_fmt. Fix dbg and __FILE__ use

[Joe Perches]

On Tue, 2010-10-26 at 18:00 -0700, Dmitry Torokhov wrote:
> On Oct 26, 2010, at 5:46 PM, Joe Perches <joe@perches.com> wrote:
> > On Tue, 2010-10-26 at 17:40 -0700, Dmitry Torokhov wrote:
> >>> Mind if I move the time to the front like this?
> >>> +#define dbg(format, arg...)                                            \
> >>> +do {                                    \
> >>> +    if (i8042_debug)                        \
> >>> +        printk(KERN_DEBUG KBUILD_MODNAME ": [%d]" format),    \
> >>> +                      (int)(jiffies - i8042_start_time), ##arg);    \
> >>> +} while (0)
> >> Another option would be to leave '\n' in dbg() and leave most of the
> >> callers as is.
> > That's really error prone though.
> In what way?

$ grep -w dbg drivers/input/serio/i8042.c | cat -n
     1			dbg("%02x <- i8042 (flush, %s)", data,
     2		dbg("%02x -> i8042 (command)", command & 0xff);
     3			dbg("%02x -> i8042 (parameter)", param[i]);
     4				dbg("     -- i8042 (timeout)");
     5				dbg("     -- i8042 (auxerr)");
     6			dbg("%02x <- i8042 (return)", param[i]);
     7			dbg("%02x -> i8042 (kbd-data)", c);
     8				dbg("Extra keyboard ACK - filtered out\n");
     9			dbg("Filtered out by platform filter\n");
    10			if (irq) dbg("Interrupt %d, without any data", irq);
    11				dbg("MUX error, status is %02x, data is %02x", str, data);
    12		dbg("%02x <- i8042 (interrupt, %d, %d%s%s)",
    13			dbg("%02x <- i8042 (aux_test_irq, %s)",
    14			dbg("     -- i8042 (aux irq test timeout)");
    15		dbg("%02x -> i8042 (panic blink)", 0xed);
    16		dbg("%02x -> i8042 (panic blink)", led);

I think 2 defects in 16 uses is a pretty high error rate.

Re: [PATCH 06/10] drivers/input/serio/i8042: Use pr_<level>, pr_fmt. Fix dbg and __FILE__ use

[Dmitry Torokhov]

On Oct 26, 2010, at 6:10 PM, Joe Perches <joe@perches.com> wrote:

> On Tue, 2010-10-26 at 18:00 -0700, Dmitry Torokhov wrote:
>> On Oct 26, 2010, at 5:46 PM, Joe Perches <joe@perches.com> wrote:
>>> On Tue, 2010-10-26 at 17:40 -0700, Dmitry Torokhov wrote:
>>>>> Mind if I move the time to the front like this?
>>>>> +#define dbg(format, arg...)                                            \
>>>>> +do {                                    \
>>>>> +    if (i8042_debug)                        \
>>>>> +        printk(KERN_DEBUG KBUILD_MODNAME ": [%d]" format),    \
>>>>> +                      (int)(jiffies - i8042_start_time), ##arg);    \
>>>>> +} while (0)
>>>> Another option would be to leave '\n' in dbg() and leave most of the
>>>> callers as is.
>>> That's really error prone though.
>> In what way?
> 
> $ grep -w dbg drivers/input/serio/i8042.c | cat -n
>     1            dbg("%02x <- i8042 (flush, %s)", data,
>     2        dbg("%02x -> i8042 (command)", command & 0xff);
>     3            dbg("%02x -> i8042 (parameter)", param[i]);
>     4                dbg("     -- i8042 (timeout)");
>     5                dbg("     -- i8042 (auxerr)");
>     6            dbg("%02x <- i8042 (return)", param[i]);
>     7            dbg("%02x -> i8042 (kbd-data)", c);
>     8                dbg("Extra keyboard ACK - filtered out\n");
>     9            dbg("Filtered out by platform filter\n");
>    10            if (irq) dbg("Interrupt %d, without any data", irq);
>    11                dbg("MUX error, status is %02x, data is %02x", str, data);
>    12        dbg("%02x <- i8042 (interrupt, %d, %d%s%s)",
>    13            dbg("%02x <- i8042 (aux_test_irq, %s)",
>    14            dbg("     -- i8042 (aux irq test timeout)");
>    15        dbg("%02x -> i8042 (panic blink)", 0xed);
>    16        dbg("%02x -> i8042 (panic blink)", led);
> 
> I think 2 defects in 16 uses is a pretty high error rate.

But how not adding /n is it much better than having it if some later change will forget to add it to the message?

-- 
Dmitry

Re: [PATCH 06/10] drivers/input/serio/i8042: Use pr_<level>, pr_fmt. Fix dbg and __FILE__ use

[Joe Perches]

On Tue, 2010-10-26 at 18:28 -0700, Dmitry Torokhov wrote:
> On Oct 26, 2010, at 6:10 PM, Joe Perches <joe@perches.com> wrote:
> > I think 2 defects in 16 uses is a pretty high error rate.
> But how not adding /n is it much better than having it if
> some later change will forget to add it to the message?

Adding \n is the default kernel style.

USB uses a similar dbg macro with a relatively
high error rate.

I fixed some in this commit below awhile ago,
but these keep creeping back in, so they _are_
error prone in actual use.

commit 759f3634267a67ac90f3fa7fc06510dfd43b4e45
Author: Joe Perches <joe@perches.com>
Date:   Fri Feb 5 16:50:08 2010 -0800

    USB: serial: Remove unnecessary \n's from dbg uses
    
    #define dbg adds the newline, messages shouldn't.
    Converted dbg("%s", "some string") to dbg("some string")
    
    Signed-off-by: Joe Perches <joe@perches.com>
    Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Re: [PATCH 06/10] drivers/input/serio/i8042: Use pr_<level>, pr_fmt. Fix dbg and __FILE__ use

[Dmitry Torokhov]

On Tue, Oct 26, 2010 at 06:35:45PM -0700, Joe Perches wrote:
> On Tue, 2010-10-26 at 18:28 -0700, Dmitry Torokhov wrote:
> > On Oct 26, 2010, at 6:10 PM, Joe Perches <joe@perches.com> wrote:
> > > I think 2 defects in 16 uses is a pretty high error rate.
> > But how not adding /n is it much better than having it if
> > some later change will forget to add it to the message?
> 
> Adding \n is the default kernel style.
> 
> USB uses a similar dbg macro with a relatively
> high error rate.
> 
> I fixed some in this commit below awhile ago,
> but these keep creeping back in, so they _are_
> error prone in actual use.
> 

OK, fair enough.

Thanks.

-- 
Dmitry

Re: [PATCH 09/10] drivers/video/msm/mddi.c: Remove multiple KERN_<level> uses

[Daniel Walker]

On Mon, 2010-10-25 at 19:44 -0700, Joe Perches wrote:
> Signed-off-by: Joe Perches <joe@perches.com>
> ---
>  drivers/video/msm/mddi.c |    5 ++---
>  1 files changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/video/msm/mddi.c b/drivers/video/msm/mddi.c
> index 7c316c3..b66d86a 100644
> --- a/drivers/video/msm/mddi.c
> +++ b/drivers/video/msm/mddi.c
> @@ -318,7 +318,7 @@ static long mddi_wait_interrupt_timeout(struct mddi_info *mddi,
>  static void mddi_wait_interrupt(struct mddi_info *mddi, uint32_t intmask)
>  {
>  	if (mddi_wait_interrupt_timeout(mddi, intmask, HZ/10) == 0)
> -		printk(KERN_INFO KERN_ERR "mddi_wait_interrupt %d, timeout "
> +		printk(KERN_INFO "mddi_wait_interrupt %d, timeout "
>  		       "waiting for %x, INT = %x, STAT = %x gotint = %x\n",
>  		       current->pid, intmask, mddi_readl(INT), mddi_readl(STAT),
>  		       mddi->got_int);
> @@ -465,8 +465,7 @@ static int __init mddi_get_client_caps(struct mddi_info *mddi)
>  
>  		if (mddi->flags & FLAG_HAVE_CAPS)
>  			break;
> -		printk(KERN_INFO KERN_ERR "mddi_init, timeout waiting for "
> -				"caps\n");
> +		printk(KERN_INFO "mddi_init, timeout waiting for caps\n");
>  	}
>  	return mddi->flags & FLAG_HAVE_CAPS;
>  }

Applied to my tree, thanks.

Daniel

-- 

Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.

Re: [PATCH 03/10] drivers/hid/hid-input.c: Remove KERN_DEBUG from dbg_hid use

[Jiri Kosina]

On Mon, 25 Oct 2010, Joe Perches wrote:

> Signed-off-by: Joe Perches <joe@perches.com>
> ---
>  drivers/hid/hid-input.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
> index bb0b365..3a1517a 100644
> --- a/drivers/hid/hid-input.c
> +++ b/drivers/hid/hid-input.c
> @@ -174,7 +174,7 @@ static int hidinput_setkeycode(struct input_dev *dev,
>  
>  		clear_bit(*old_keycode, dev->keybit);
>  		set_bit(usage->code, dev->keybit);
> -		dbg_hid(KERN_DEBUG "Assigned keycode %d to HID usage code %x\n",
> +		dbg_hid("Assigned keycode %d to HID usage code %x\n",
>  			usage->code, usage->hid);
>  
>  		/*

Applied to HID tree, thanks.

-- 
Jiri Kosina
SUSE Labs, Novell Inc.