gspca for_2.6.36 - maybe does not work properly for me

gspca for_2.6.36 - maybe does not work properly for me

[Tõnu Samuel]

I am Sony PS3 Eye webcam user. 

After installing 2.6.36 this camera gets recognized but actually does
not work. It might be some own stupidity of improper kernel
configuration but I cannot track it down at moment.

relevant dmesg:

[ 1372.224068] usb 1-5: new high speed USB device using ehci_hcd and
address 5
[ 1372.359574] usb 1-5: New USB device found, idVendor=1415,
idProduct=2000
[ 1372.359582] usb 1-5: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1372.359588] usb 1-5: Product: USB Camera-B4.04.27.1
[ 1372.359593] usb 1-5: Manufacturer: OmniVision Technologies, Inc.
[ 1372.360623] gspca: probing 1415:2000
[ 1372.483830] ov534: Sensor ID: 7721
[ 1372.534205] ov534: frame_rate: 30
[ 1372.534319] gspca: video0 created

spider@spider:~$ lsusb -t
/:  Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/2p, 12M
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/3p, 12M
    |__ Port 2: Dev 2, If 0, Class='bInterfaceClass 0xe0 not yet
handled', Driver=btusb, 12M
    |__ Port 2: Dev 2, If 1, Class='bInterfaceClass 0xe0 not yet
handled', Driver=btusb, 12M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/3p, 12M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/3p, 12M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/3p, 12M
    |__ Port 1: Dev 2, If 0, Class=HID, Driver=usbhid, 1.5M
    |__ Port 1: Dev 2, If 1, Class=HID, Driver=usbhid, 1.5M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M
    |__ Port 3: Dev 2, If 0, Class=vend., Driver=rt2870, 480M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M
    |__ Port 5: Dev 5, If 0, Class=vend., Driver=ov534, 480M
    |__ Port 5: Dev 5, If 1, Class=audio, Driver=snd-usb-audio, 480M
    |__ Port 5: Dev 5, If 2, Class=audio, Driver=snd-usb-audio, 480M
spider@spider:~$ 

spider@spider:~$ guvcview 
guvcview 1.1.3
video device: /dev/video0 
/dev/video0 - device 1
Init. USB Camera-B4.04.27.1 (location: usb-0000:00:12.2-5)
{ pixelformat = 'YUYV', description = 'YUYV' }
{ discrete: width = 320, height = 240 }
	Time interval between frame: 1/125, 1/100, 1/75, 1/60, 1/50, 1/40,
1/30, 
{ discrete: width = 640, height = 480 }
	Time interval between frame: 1/60, 1/50, 1/40, 1/30, 1/15, 
checking format: 1448695129
vid:1415 
pid:2000 
driver:ov534
VIDIOC_STREAMON - Unable to start capture: Device or resource busy



No image is produced with any webcam software I have tried.

Kernel config is too big to be posted here, so I skip it.

I have tried same on different computers with Intel integrated video and
NVIDIA propietary stuff to ensure I have all right with video side.
BTW new PS3 Eye (looks same but product code is different, price is
lower) is released in Japan and I get my hands on it today later. Then I
check if old driver works at all etc.

   Tõnu

Re: gspca for_2.6.36 - maybe does not work properly for me

[Maciej Rutecki]

(add CC's)
On czwartek, 28 października 2010 o 13:07:57 Tõnu Samuel wrote:
> I am Sony PS3 Eye webcam user.
> 
> After installing 2.6.36 this camera gets recognized but actually does
> not work. It might be some own stupidity of improper kernel
> configuration but I cannot track it down at moment.
> 
> relevant dmesg:
> 
> [ 1372.224068] usb 1-5: new high speed USB device using ehci_hcd and
> address 5
> [ 1372.359574] usb 1-5: New USB device found, idVendor=1415,
> idProduct=2000
> [ 1372.359582] usb 1-5: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 1372.359588] usb 1-5: Product: USB Camera-B4.04.27.1
> [ 1372.359593] usb 1-5: Manufacturer: OmniVision Technologies, Inc.
> [ 1372.360623] gspca: probing 1415:2000
> [ 1372.483830] ov534: Sensor ID: 7721
> [ 1372.534205] ov534: frame_rate: 30
> [ 1372.534319] gspca: video0 created
> 
> spider@spider:~$ lsusb -t
> /:  Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/2p, 12M
> /:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/3p, 12M
> 
>     |__ Port 2: Dev 2, If 0, Class='bInterfaceClass 0xe0 not yet
> 
> handled', Driver=btusb, 12M
> 
>     |__ Port 2: Dev 2, If 1, Class='bInterfaceClass 0xe0 not yet
> 
> handled', Driver=btusb, 12M
> /:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/3p, 12M
> /:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/3p, 12M
> /:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/3p, 12M
> 
>     |__ Port 1: Dev 2, If 0, Class=HID, Driver=usbhid, 1.5M
>     |__ Port 1: Dev 2, If 1, Class=HID, Driver=usbhid, 1.5M
> 
> /:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M
> 
>     |__ Port 3: Dev 2, If 0, Class=vend., Driver=rt2870, 480M
> 
> /:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M
> 
>     |__ Port 5: Dev 5, If 0, Class=vend., Driver=ov534, 480M
>     |__ Port 5: Dev 5, If 1, Class=audio, Driver=snd-usb-audio, 480M
>     |__ Port 5: Dev 5, If 2, Class=audio, Driver=snd-usb-audio, 480M
> 
> spider@spider:~$
> 
> spider@spider:~$ guvcview
> guvcview 1.1.3
> video device: /dev/video0
> /dev/video0 - device 1
> Init. USB Camera-B4.04.27.1 (location: usb-0000:00:12.2-5)
> { pixelformat = 'YUYV', description = 'YUYV' }
> { discrete: width = 320, height = 240 }
> 	Time interval between frame: 1/125, 1/100, 1/75, 1/60, 1/50, 1/40,
> 1/30,
> { discrete: width = 640, height = 480 }
> 	Time interval between frame: 1/60, 1/50, 1/40, 1/30, 1/15,
> checking format: 1448695129
> vid:1415
> pid:2000
> driver:ov534
> VIDIOC_STREAMON - Unable to start capture: Device or resource busy
> 
> 
> 
> No image is produced with any webcam software I have tried.
> 
> Kernel config is too big to be posted here, so I skip it.
> 
> I have tried same on different computers with Intel integrated video and
> NVIDIA propietary stuff to ensure I have all right with video side.
> BTW new PS3 Eye (looks same but product code is different, price is
> lower) is released in Japan and I get my hands on it today later. Then I
> check if old driver works at all etc.
> 

2.6.35,  or  another, older kernel works OK?
-- 
Maciej Rutecki
http://www.maciek.unixy.pl

Re: gspca for_2.6.36 - maybe does not work properly for me

[Jean-Francois Moine]

On Wed, 3 Nov 2010 20:07:25 +0100
Maciej Rutecki <maciej.rutecki@gmail.com> wrote:

> (add CC's)
> On czwartek, 28 października 2010 o 13:07:57 Tõnu Samuel wrote:
> > I am Sony PS3 Eye webcam user.
> > 
> > After installing 2.6.36 this camera gets recognized but actually
> > does not work. It might be some own stupidity of improper kernel
> > configuration but I cannot track it down at moment.
> > 
> > relevant dmesg:
> > 
> > [ 1372.224068] usb 1-5: new high speed USB device using ehci_hcd and
> > address 5
> > [ 1372.359574] usb 1-5: New USB device found, idVendor=1415,
> > idProduct=2000
> > [ 1372.359582] usb 1-5: New USB device strings: Mfr=1, Product=2,
> > SerialNumber=0
> > [ 1372.359588] usb 1-5: Product: USB Camera-B4.04.27.1
> > [ 1372.359593] usb 1-5: Manufacturer: OmniVision Technologies, Inc.
> > [ 1372.360623] gspca: probing 1415:2000
> > [ 1372.483830] ov534: Sensor ID: 7721
> > [ 1372.534205] ov534: frame_rate: 30
> > [ 1372.534319] gspca: video0 created
	[snip]
> 2.6.35,  or  another, older kernel works OK?

Hi,

Yes, this is a regression. It has been fixed last month, but too late
for 2.6.36 (commit f43402fa55bf5e7e190c176343015122f694857c).

Best regards.

-- 
Ken ar c'hentañ	|	      ** Breizh ha Linux atav! **
Jef		|		http://moinejf.free.fr/

Re: gspca for_2.6.36 - maybe does not work properly for me (ov534)

[Antonio Ospite]

[-- Attachment #1: Type: text/plain, Size: 1068 bytes --]

On Wed, 3 Nov 2010 20:07:25 +0100
Maciej Rutecki <maciej.rutecki@gmail.com> wrote:

> (add CC's)
> On czwartek, 28 października 2010 o 13:07:57 Tõnu Samuel wrote:
> > I am Sony PS3 Eye webcam user.
> >

Please more context in the Subject next time :)

> > After installing 2.6.36 this camera gets recognized but actually does
> > not work. It might be some own stupidity of improper kernel
> > configuration but I cannot track it down at moment.
> >

This is fixed in 2.6.37-rc1, Mauro this should go in 2.6.36.1 as well,
ASAP please as we missed 2.6.36.

This is the thread:
http://www.mail-archive.com/linux-media@vger.kernel.org/msg23039.html

This is the patch:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=f43402fa55bf5e7e190c176343015122f694857c

Regards,
   Antonio

-- 
Antonio Ospite
http://ao2.it

PGP public key ID: 0x4553B001

A: Because it messes up the order in which people normally read text.
   See http://en.wikipedia.org/wiki/Posting_style
Q: Why is top-posting such a bad thing?

[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]

Re: gspca for_2.6.36 - maybe does not work properly for me (ov534)

[Maciej Rutecki]

On środa, 3 listopada 2010 o 21:53:39 Antonio Ospite wrote:
> On Wed, 3 Nov 2010 20:07:25 +0100
> 
> Maciej Rutecki <maciej.rutecki@gmail.com> wrote:
> > (add CC's)
> > 
> > On czwartek, 28 października 2010 o 13:07:57 Tõnu Samuel wrote:
> > > I am Sony PS3 Eye webcam user.
> 
> Please more context in the Subject next time :)
> 
> > > After installing 2.6.36 this camera gets recognized but actually does
> > > not work. It might be some own stupidity of improper kernel
> > > configuration but I cannot track it down at moment.
> 
> This is fixed in 2.6.37-rc1, Mauro this should go in 2.6.36.1 as well,
> ASAP please as we missed 2.6.36.
> 
> This is the thread:
> http://www.mail-archive.com/linux-media@vger.kernel.org/msg23039.html
> 
> This is the patch:
> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h
> =f43402fa55bf5e7e190c176343015122f694857c
> 
> Regards,
>    Antonio

Thanks for the information.

Regards
-- 
Maciej Rutecki
http://www.maciek.unixy.pl