* PinnaclePCTVusb2
@ 2010-10-31 8:56 danlin
0 siblings, 0 replies; 2+ messages in thread
From: danlin @ 2010-10-31 8:56 UTC (permalink / raw)
To: linux-media
[-- Attachment #1: Type: text/plain, Size: 9309 bytes --]
I remember i was able to use this card once. it was compiling v4l ,using
hg mercurial...it's sad i can't use it anymore...tell me how please.
this dmesg is after i tried
modprobe card=45
modprobe em28xx-dvb
info
Linux ubuntu 2.6.35-23-generic #36-Ubuntu SMP Tue Oct 26 17:13:06 UTC
2010 x86_64 GNU/Linux
lsusb
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 003: ID 046d:c001 Logitech, Inc. N48/M-BB48 [FirstMouse
Plus]
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 008: ID eb1a:2870 eMPIA Technology, Inc. Pinnacle PCTV
Stick
Bus 002 Device 004: ID 04f2:b159 Chicony Electronics Co., Ltd
Bus 002 Device 003: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
dmesg
[86192.461739] usb 2-2: USB disconnect, address 7
[86203.493581] usb 2-1: USB disconnect, address 6
[86217.040102] usb 2-2: new high speed USB device using ehci_hcd and
address 8
[86217.435136] em28xx: New device USB 2870 Device @ 480 Mbps (eb1a:2870,
interface 0, class 0)
[86217.435832] em28xx #0: chip ID is em2870
[86217.519759] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 70 28 c0 12
81 00 6a 22 00 00
[86217.519779] em28xx #0: i2c eeprom 10: 00 00 04 57 02 0d 00 00 00 00
00 00 00 00 00 00
[86217.519796] em28xx #0: i2c eeprom 20: 44 00 00 00 f0 10 02 00 00 00
00 00 5b 00 00 00
[86217.519812] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01
00 00 10 1d 8c 49
[86217.519829] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[86217.519848] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[86217.519857] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00
22 03 55 00 53 00
[86217.519866] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 37 00
30 00 20 00 44 00
[86217.519874] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00
00 00 00 00 00 00
[86217.519883] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[86217.519892] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[86217.519901] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[86217.519910] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[86217.519918] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[86217.519927] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[86217.519936] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[86217.519945] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash =
0x5e2c36c0
[86217.519947] em28xx #0: EEPROM info:
[86217.519949] em28xx #0: No audio on board.
[86217.519950] em28xx #0: 500mA max power
[86217.519952] em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000
[86217.521619] em28xx #0: Identified as Unknown EM2750/28xx video
grabber (card=1)
[86217.552988] em28xx #0: found i2c device @ 0xa0 [eeprom]
[86217.559370] em28xx #0: found i2c device @ 0xc0 [tuner (analog)]
[86217.571370] em28xx #0: Your board has no unique USB ID and thus need
a hint to be detected.
[86217.571378] em28xx #0: You may try to use card=<n> insmod option to
workaround that.
[86217.571382] em28xx #0: Please send an email with this log to:
[86217.571385] em28xx #0: V4L Mailing List
<linux-media@vger.kernel.org>
[86217.571388] em28xx #0: Board eeprom hash is 0x5e2c36c0
[86217.571392] em28xx #0: Board i2c devicelist hash is 0x4b800080
[86217.571395] em28xx #0: Here is a list of valid choices for the
card=<n> insmod option:
[86217.571401] em28xx #0: card=0 -> Unknown EM2800 video grabber
[86217.571405] em28xx #0: card=1 -> Unknown EM2750/28xx video
grabber
[86217.571409] em28xx #0: card=2 -> Terratec Cinergy 250 USB
[86217.571413] em28xx #0: card=3 -> Pinnacle PCTV USB 2
[86217.571416] em28xx #0: card=4 -> Hauppauge WinTV USB 2
[86217.571420] em28xx #0: card=5 -> MSI VOX USB 2.0
[86217.571424] em28xx #0: card=6 -> Terratec Cinergy 200 USB
[86217.571428] em28xx #0: card=7 -> Leadtek Winfast USB II
[86217.571431] em28xx #0: card=8 -> Kworld USB2800
[86217.571435] em28xx #0: card=9 -> Pinnacle Dazzle DVC
90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2
[86217.571440] em28xx #0: card=10 -> Hauppauge WinTV HVR 900
[86217.571444] em28xx #0: card=11 -> Terratec Hybrid XS
[86217.571448] em28xx #0: card=12 -> Kworld PVR TV 2800 RF
[86217.571452] em28xx #0: card=13 -> Terratec Prodigy XS
[86217.571455] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview
Prolink PlayTV USB 2.0
[86217.571460] em28xx #0: card=15 -> V-Gear PocketTV
[86217.571463] em28xx #0: card=16 -> Hauppauge WinTV HVR 950
[86217.571467] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick
[86217.571471] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2)
[86217.571475] em28xx #0: card=19 -> EM2860/SAA711X Reference Design
[86217.571479] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600
[86217.571483] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX
+ Video Encoder
[86217.571487] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam
grabber
[86217.571491] em28xx #0: card=23 -> Huaqi DLCW-130
[86217.571495] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner
[86217.571498] em28xx #0: card=25 -> Gadmei UTV310
[86217.571502] em28xx #0: card=26 -> Hercules Smart TV USB 2.0
[86217.571506] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips
FM1216ME)
[86217.571510] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe
[86217.571514] em28xx #0: card=29 -> EM2860/TVP5150 Reference Design
[86217.571518] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0
[86217.571522] em28xx #0: card=31 -> Usbgear VD204v9
[86217.571525] em28xx #0: card=32 -> Supercomp USB 2.0 TV
[86217.571529] em28xx #0: card=33 -> (null)
[86217.571532] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS
[86217.571536] em28xx #0: card=35 -> Typhoon DVD Maker
[86217.571540] em28xx #0: card=36 -> NetGMBH Cam
[86217.571543] em28xx #0: card=37 -> Gadmei UTV330
[86217.571547] em28xx #0: card=38 -> Yakumo MovieMixer
[86217.571551] em28xx #0: card=39 -> KWorld PVRTV 300U
[86217.571554] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U
[86217.571558] em28xx #0: card=41 -> Kworld 350 U DVB-T
[86217.571562] em28xx #0: card=42 -> Kworld 355 U DVB-T
[86217.571565] em28xx #0: card=43 -> Terratec Cinergy T XS
[86217.571569] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060)
[86217.571573] em28xx #0: card=45 -> Pinnacle PCTV DVB-T
[86217.571577] em28xx #0: card=46 -> Compro, VideoMate U3
[86217.571581] em28xx #0: card=47 -> KWorld DVB-T 305U
[86217.571584] em28xx #0: card=48 -> KWorld DVB-T 310U
[86217.571588] em28xx #0: card=49 -> MSI DigiVox A/D
[86217.571592] em28xx #0: card=50 -> MSI DigiVox A/D II
[86217.571595] em28xx #0: card=51 -> Terratec Hybrid XS Secam
[86217.571599] em28xx #0: card=52 -> DNT DA2 Hybrid
[86217.571603] em28xx #0: card=53 -> Pinnacle Hybrid Pro
[86217.571606] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR
[86217.571610] em28xx #0: card=55 -> Terratec Hybrid XS (em2882)
[86217.571614] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2)
[86217.571618] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330
[86217.571622] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo
[86217.571625] em28xx #0: card=59 -> (null)
[86217.571629] em28xx #0: card=60 -> Hauppauge WinTV HVR 850
[86217.571633] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0
[86217.571636] em28xx #0: card=62 -> Gadmei TVR200
[86217.571640] em28xx #0: card=63 -> Kaiomy TVnPC U2
[86217.571644] em28xx #0: card=64 -> Easy Cap Capture DC-60
[86217.571647] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ
[86217.571651] em28xx #0: card=66 -> Empire dual TV
[86217.571655] em28xx #0: card=67 -> Terratec Grabby
[86217.571658] em28xx #0: card=68 -> Terratec AV350
[86217.571662] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box
[86217.571666] em28xx #0: card=70 -> Evga inDtube
[86217.571669] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix
[86217.571673] em28xx #0: card=72 -> Gadmei UTV330+
[86217.571677] em28xx #0: card=73 -> Reddo DVB-C USB TV Box
[86217.571681] em28xx #0: card=74 -> Actionmaster/LinXcel/Digitus
VC211A
[86217.571684] em28xx #0: card=75 -> Dikom DK300
[86217.571691] em28xx #0: v4l2 driver version 0.1.2
[86217.575596] IR NEC protocol handler initialized
[86217.577257] em28xx #0: V4L2 video device registered as video1
[86217.578010] usbcore: registered new interface driver em28xx
[86217.578013] em28xx driver loaded
[86217.616364] IR RC5(x) protocol handler initialized
[86217.630910] IR RC6 protocol handler initialized
[86217.650968] IR JVC protocol handler initialized
[86217.670455] IR Sony protocol handler initialized
[86217.702104] lirc_dev: IR Remote Control driver registered, major 250
[86217.709599] IR LIRC bridge handler initialized
[86338.409334] Em28xx: Initialized (Em28xx dvb Extension) extension
[-- Attachment #2: file --]
[-- Type: text/plain, Size: 69968 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-23-generic (buildd@yellow) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #36-Ubuntu SMP Tue Oct 26 17:13:06 UTC 2010 (Ubuntu 2.6.35-23.36-generic 2.6.35.7)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-23-generic root=UUID=8a7c4326-dbcc-4ff3-aecc-e6b94af3f1b9 ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7b0000 (usable)
[ 0.000000] BIOS-e820: 000000007f7b0000 - 000000007f7c5400 (reserved)
[ 0.000000] BIOS-e820: 000000007f7c5400 - 000000007f7e7fb8 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f7e7fb8 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7f7b0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 2 base 0FEDA0000 mask FFFFE0000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007f7b0000 (usable)
[ 0.000000] modified: 000000007f7b0000 - 000000007f7c5400 (reserved)
[ 0.000000] modified: 000000007f7c5400 - 000000007f7e7fb8 (ACPI NVS)
[ 0.000000] modified: 000000007f7e7fb8 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000fed9a000 (reserved)
[ 0.000000] modified: 00000000feda0000 - 00000000fedc0000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007f7b0000
[ 0.000000] 0000000000 - 007f600000 page 2M
[ 0.000000] 007f600000 - 007f7b0000 page 4k
[ 0.000000] kernel direct mapping tables up to 7f7b0000 @ 16000-1a000
[ 0.000000] RAMDISK: 37571000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f6f60 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 000000007f7c81c4 00074 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: FACP 000000007f7c8084 000F4 (v04 HP 308A 00000003 HP 00000001)
[ 0.000000] ACPI: DSDT 000000007f7c8348 13057 (v01 HP nc6xxxs 00010000 MSFT 03000001)
[ 0.000000] ACPI: FACS 000000007f7e7d80 00040
[ 0.000000] ACPI: HPET 000000007f7c8238 00038 (v01 HP 308A 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 000000007f7c8270 00068 (v01 HP 308A 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 000000007f7c82d8 0003C (v01 HP 308A 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA 000000007f7c8314 00032 (v02 HP 308A 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 000000007f7db39f 00328 (v01 HP HPQSAT 00000001 MSFT 03000001)
[ 0.000000] ACPI: SSDT 000000007f7db6c7 0017D (v01 HP HPQMRM 00000001 MSFT 03000001)
[ 0.000000] ACPI: SSDT 000000007f7dc229 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317)
[ 0.000000] ACPI: SSDT 000000007f7dc488 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317)
[ 0.000000] ACPI: SSDT 000000007f7dc52e 004D7 (v01 HP CpuPm 00003000 INTL 20060317)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007f7b0000
[ 0.000000] Initmem setup node 0 0000000000000000-000000007f7b0000
[ 0.000000] NODE_DATA [0000000001d181c0 - 0000000001d1d1bf]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002600000-ffff8800041fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f7b0
[ 0.000000] On node 0 totalpages: 522047
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7083 pages used for memmap
[ 0.000000] DMA32 zone: 510981 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [18000 - 187ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91520 r8192 d23168 u1048576
[ 0.000000] pcpu-alloc: s91520 r8192 d23168 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 514908
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-23-generic root=UUID=8a7c4326-dbcc-4ff3-aecc-e6b94af3f1b9 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Subtract (46 early reservations)
[ 0.000000] #1 [0001000000 - 0001d17114] TEXT DATA BSS
[ 0.000000] #2 [0037571000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved
[ 0.000000] #4 [0001d18000 - 0001d18188] BRK
[ 0.000000] #5 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #6 [0000012000 - 0000016000] ACPI WAKEUP
[ 0.000000] #7 [0000016000 - 0000018000] PGTABLE
[ 0.000000] #8 [0001d181c0 - 0001d1d1c0] NODE_DATA
[ 0.000000] #9 [0001d1d1c0 - 0001d1e1c0] BOOTMEM
[ 0.000000] #10 [0001d17140 - 0001d172c0] BOOTMEM
[ 0.000000] #11 [000251f000 - 0002520000] BOOTMEM
[ 0.000000] #12 [0002520000 - 0002521000] BOOTMEM
[ 0.000000] #13 [0002600000 - 0004200000] MEMMAP 0
[ 0.000000] #14 [0001d172c0 - 0001d17440] BOOTMEM
[ 0.000000] #15 [0001d1e1c0 - 0001d2a1c0] BOOTMEM
[ 0.000000] #16 [0001d2b000 - 0001d2c000] BOOTMEM
[ 0.000000] #17 [0001d17440 - 0001d17481] BOOTMEM
[ 0.000000] #18 [0001d174c0 - 0001d17503] BOOTMEM
[ 0.000000] #19 [0001d17540 - 0001d17850] BOOTMEM
[ 0.000000] #20 [0001d17880 - 0001d178e8] BOOTMEM
[ 0.000000] #21 [0001d17900 - 0001d17968] BOOTMEM
[ 0.000000] #22 [0001d17980 - 0001d179e8] BOOTMEM
[ 0.000000] #23 [0001d17a00 - 0001d17a68] BOOTMEM
[ 0.000000] #24 [0001d17a80 - 0001d17ae8] BOOTMEM
[ 0.000000] #25 [0001d17b00 - 0001d17b68] BOOTMEM
[ 0.000000] #26 [0001d17b80 - 0001d17be8] BOOTMEM
[ 0.000000] #27 [0001d17c00 - 0001d17c68] BOOTMEM
[ 0.000000] #28 [0001d17c80 - 0001d17ce8] BOOTMEM
[ 0.000000] #29 [0001d17d00 - 0001d17d68] BOOTMEM
[ 0.000000] #30 [0001d17d80 - 0001d17de8] BOOTMEM
[ 0.000000] #31 [0001d17e00 - 0001d17e68] BOOTMEM
[ 0.000000] #32 [0001d17e80 - 0001d17ee8] BOOTMEM
[ 0.000000] #33 [0001d17f00 - 0001d17f20] BOOTMEM
[ 0.000000] #34 [0001d17f40 - 0001d17faa] BOOTMEM
[ 0.000000] #35 [0001d2a1c0 - 0001d2a22a] BOOTMEM
[ 0.000000] #36 [0001e00000 - 0001e1e000] BOOTMEM
[ 0.000000] #37 [0001f00000 - 0001f1e000] BOOTMEM
[ 0.000000] #38 [0001d17fc0 - 0001d17fc8] BOOTMEM
[ 0.000000] #39 [0001d2a240 - 0001d2a248] BOOTMEM
[ 0.000000] #40 [0001d2a280 - 0001d2a288] BOOTMEM
[ 0.000000] #41 [0001d2a2c0 - 0001d2a2d0] BOOTMEM
[ 0.000000] #42 [0001d2a300 - 0001d2a440] BOOTMEM
[ 0.000000] #43 [0001d2a440 - 0001d2a4a0] BOOTMEM
[ 0.000000] #44 [0001d2a4c0 - 0001d2a520] BOOTMEM
[ 0.000000] #45 [0001d2c000 - 0001d34000] BOOTMEM
[ 0.000000] Memory: 2034968k/2088640k available (5710k kernel code, 452k absent, 53220k reserved, 5380k data, 908k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:512
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 20971520 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1994.916 MHz processor.
[ 0.010011] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.83 BogoMIPS (lpj=19949160)
[ 0.010016] pid_max: default: 32768 minimum: 301
[ 0.010043] Security Framework initialized
[ 0.010066] AppArmor: AppArmor initialized
[ 0.010067] Yama: becoming mindful.
[ 0.010343] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011660] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.012425] Mount-cache hash table entries: 256
[ 0.012580] Initializing cgroup subsys ns
[ 0.012586] Initializing cgroup subsys cpuacct
[ 0.012590] Initializing cgroup subsys memory
[ 0.012599] Initializing cgroup subsys devices
[ 0.012602] Initializing cgroup subsys freezer
[ 0.012604] Initializing cgroup subsys net_cls
[ 0.012636] CPU: Physical Processor ID: 0
[ 0.012637] CPU: Processor Core ID: 0
[ 0.012639] mce: CPU supports 6 MCE banks
[ 0.012647] CPU0: Thermal monitoring handled by SMI
[ 0.012653] using mwait in idle threads.
[ 0.012655] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.012661] PEBS disabled due to CPU errata.
[ 0.012665] ... version: 2
[ 0.012666] ... bit width: 40
[ 0.012668] ... generic registers: 2
[ 0.012670] ... value mask: 000000ffffffffff
[ 0.012671] ... max period: 000000007fffffff
[ 0.012673] ... fixed-purpose events: 3
[ 0.012674] ... event mask: 0000000700000003
[ 0.015204] ACPI: Core revision 20100428
[ 0.040009] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.040016] ftrace: allocating 22688 entries in 89 pages
[ 0.050064] Setting APIC routing to flat
[ 0.050421] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.159727] CPU0: Intel(R) Core(TM)2 Duo CPU T5870 @ 2.00GHz stepping 0d
[ 0.160000] Booting Node 0, Processors #1 Ok.
[ 0.020000] CPU1: Thermal monitoring handled by SMI
[ 0.320020] Brought up 2 CPUs
[ 0.320023] Total of 2 processors activated (7979.84 BogoMIPS).
[ 0.320527] devtmpfs: initialized
[ 0.320761] regulator: core version 0.5
[ 0.320798] Time: 10:49:34 Date: 10/30/10
[ 0.320838] NET: Registered protocol family 16
[ 0.320862] Trying to unpack rootfs image as initramfs...
[ 0.320981] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.320984] ACPI: bus type pci registered
[ 0.321057] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.321061] PCI: not using MMCONFIG
[ 0.321063] PCI: Using configuration type 1 for base access
[ 0.330262] bio: create slab <bio-0> at 0
[ 0.332431] ACPI: EC: Look up EC in DSDT
[ 0.366759] ACPI: SSDT 000000007f7db90c 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317)
[ 0.366759] ACPI: Dynamic OEM Table Load:
[ 0.366759] ACPI: SSDT (null) 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317)
[ 0.366759] ACPI: SSDT 000000007f7dbc10 00619 (v01 HP Cpu0Cst 00003001 INTL 20060317)
[ 0.366759] ACPI: Dynamic OEM Table Load:
[ 0.366759] ACPI: SSDT (null) 00619 (v01 HP Cpu0Cst 00003001 INTL 20060317)
[ 0.366759] ACPI: SSDT 000000007f7db844 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
[ 0.366759] ACPI: Dynamic OEM Table Load:
[ 0.366759] ACPI: SSDT (null) 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
[ 0.366759] ACPI: SSDT 000000007f7dbb8b 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
[ 0.366759] ACPI: Dynamic OEM Table Load:
[ 0.366759] ACPI: SSDT (null) 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
[ 0.403478] ACPI: Interpreter enabled
[ 0.403478] ACPI: (supports S0 S3 S4 S5)
[ 0.403478] ACPI: Using IOAPIC for interrupt routing
[ 0.403478] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.403478] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.427293] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.427379] ACPI: Power Resource [C2A5] (on)
[ 0.427431] ACPI: Power Resource [C1CE] (off)
[ 0.427535] ACPI: Power Resource [C3C1] (off)
[ 0.427631] ACPI: Power Resource [C3C2] (off)
[ 0.427725] ACPI: Power Resource [C3C3] (off)
[ 0.427819] ACPI: Power Resource [C3C4] (off)
[ 0.427913] ACPI: Power Resource [C3C5] (off)
[ 0.428227] ACPI: No dock devices found.
[ 0.428231] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.432337] ACPI: PCI Root Bridge [C003] (domain 0000 [bus 00-ff])
[ 0.440461] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.440464] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.440468] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.440471] pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0xfedfffff]
[ 0.440474] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff]
[ 0.440477] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000dffff]
[ 0.440549] pci 0000:00:02.0: reg 10: [mem 0xe8400000-0xe84fffff 64bit]
[ 0.440557] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.440562] pci 0000:00:02.0: reg 20: [io 0x6000-0x6007]
[ 0.440602] pci 0000:00:02.1: reg 10: [mem 0xe8500000-0xe85fffff 64bit]
[ 0.440725] pci 0000:00:1a.0: reg 20: [io 0x6020-0x603f]
[ 0.440795] pci 0000:00:1a.7: reg 10: [mem 0xe8600000-0xe86003ff]
[ 0.440863] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.440870] pci 0000:00:1a.7: PME# disabled
[ 0.440918] pci 0000:00:1b.0: reg 10: [mem 0xe8604000-0xe8607fff 64bit]
[ 0.440984] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.440989] pci 0000:00:1b.0: PME# disabled
[ 0.441096] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.441101] pci 0000:00:1c.0: PME# disabled
[ 0.441210] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.441215] pci 0000:00:1c.1: PME# disabled
[ 0.441326] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.441332] pci 0000:00:1c.4: PME# disabled
[ 0.441441] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.441446] pci 0000:00:1c.5: PME# disabled
[ 0.441513] pci 0000:00:1d.0: reg 20: [io 0x6040-0x605f]
[ 0.441583] pci 0000:00:1d.1: reg 20: [io 0x6060-0x607f]
[ 0.441652] pci 0000:00:1d.2: reg 20: [io 0x6080-0x609f]
[ 0.441719] pci 0000:00:1d.7: reg 10: [mem 0xe8608000-0xe86083ff]
[ 0.441786] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.441792] pci 0000:00:1d.7: PME# disabled
[ 0.441968] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.441973] pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH6 GPIO
[ 0.441978] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
[ 0.441987] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)
[ 0.442044] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.442053] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.442061] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.442070] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.442078] pci 0000:00:1f.1: reg 20: [io 0x60a0-0x60af]
[ 0.442145] pci 0000:00:1f.2: reg 10: [io 0x13f0-0x13f7]
[ 0.442153] pci 0000:00:1f.2: reg 14: [io 0x15f4-0x15f7]
[ 0.442161] pci 0000:00:1f.2: reg 18: [io 0x1370-0x1377]
[ 0.442170] pci 0000:00:1f.2: reg 1c: [io 0x1574-0x1577]
[ 0.442178] pci 0000:00:1f.2: reg 20: [io 0x60e0-0x60ff]
[ 0.442186] pci 0000:00:1f.2: reg 24: [mem 0xe8609000-0xe86097ff]
[ 0.442232] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.442237] pci 0000:00:1f.2: PME# disabled
[ 0.442325] pci 0000:00:1c.0: PCI bridge to [bus 08-08]
[ 0.442331] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.442338] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.442346] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.442542] pci 0000:10:00.0: reg 10: [mem 0xe8000000-0xe8001fff 64bit]
[ 0.442682] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
[ 0.442704] pci 0000:10:00.0: PME# disabled
[ 0.442758] pci 0000:00:1c.1: PCI bridge to [bus 10-10]
[ 0.442764] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.442769] pci 0000:00:1c.1: bridge window [mem 0xe8000000-0xe80fffff]
[ 0.442778] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.442843] pci 0000:00:1c.4: PCI bridge to [bus 28-28]
[ 0.442848] pci 0000:00:1c.4: bridge window [io 0x4000-0x5fff]
[ 0.442854] pci 0000:00:1c.4: bridge window [mem 0xe4000000-0xe7ffffff]
[ 0.442862] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.442985] pci 0000:30:00.0: reg 10: [mem 0xe0000000-0xe0003fff 64bit]
[ 0.442996] pci 0000:30:00.0: reg 18: [io 0x2000-0x20ff]
[ 0.443089] pci 0000:30:00.0: supports D1 D2
[ 0.443091] pci 0000:30:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.443098] pci 0000:30:00.0: PME# disabled
[ 0.443132] pci 0000:00:1c.5: PCI bridge to [bus 30-30]
[ 0.443137] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.443143] pci 0000:00:1c.5: bridge window [mem 0xe0000000-0xe00fffff]
[ 0.443152] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.443255] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.443261] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.443266] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.443275] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.443278] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.443281] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.443283] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.443286] pci 0000:00:1e.0: bridge window [mem 0x7f800000-0xfedfffff] (subtractive decode)
[ 0.443289] pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
[ 0.443291] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000dffff] (subtractive decode)
[ 0.443332] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
[ 0.443604] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B6._PRT]
[ 0.443726] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C125._PRT]
[ 0.443804] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C139._PRT]
[ 0.443889] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C13C._PRT]
[ 0.444015] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C13D._PRT]
[ 0.485606] ACPI: PCI Interrupt Link [C135] (IRQs *10 11)
[ 0.485823] ACPI: PCI Interrupt Link [C136] (IRQs *10 11)
[ 0.486038] ACPI: PCI Interrupt Link [C137] (IRQs 10 *11)
[ 0.486242] ACPI: PCI Interrupt Link [C138] (IRQs 10 11) *0, disabled.
[ 0.486457] ACPI: PCI Interrupt Link [C148] (IRQs *10 11)
[ 0.486667] ACPI: PCI Interrupt Link [C149] (IRQs *10 11)
[ 0.486870] ACPI: PCI Interrupt Link [C14A] (IRQs 10 11) *0, disabled.
[ 0.486970] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20100428/pci_link-185)
[ 0.487080] HEST: Table is not found!
[ 0.487171] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.487186] vgaarb: loaded
[ 0.487360] SCSI subsystem initialized
[ 0.487475] libata version 3.00 loaded.
[ 0.487531] usbcore: registered new interface driver usbfs
[ 0.487543] usbcore: registered new interface driver hub
[ 0.487636] usbcore: registered new device driver usb
[ 0.488022] ACPI: WMI: Mapper loaded
[ 0.488025] PCI: Using ACPI for IRQ routing
[ 0.488028] PCI: pci_cache_line_size set to 64 bytes
[ 0.488184] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.488188] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.488191] reserve RAM buffer: 000000007f7b0000 - 000000007fffffff
[ 0.488295] NetLabel: Initializing
[ 0.488298] NetLabel: domain hash size = 128
[ 0.488299] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.488314] NetLabel: unlabeled traffic allowed by default
[ 0.488348] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.488354] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.488359] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.510045] Switching to clocksource tsc
[ 0.521456] AppArmor: AppArmor Filesystem Enabled
[ 0.521484] pnp: PnP ACPI init
[ 0.521513] ACPI: bus type pnp registered
[ 0.530729] pnp: PnP ACPI: found 12 devices
[ 0.530732] ACPI: ACPI bus type pnp unregistered
[ 0.530747] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.530751] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.530754] system 00:00: [mem 0x00100000-0x7f7fffff] could not be reserved
[ 0.530764] system 00:09: [io 0x0500-0x057f] has been reserved
[ 0.530767] system 00:09: [io 0x0800-0x080f] has been reserved
[ 0.530770] system 00:09: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.530773] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.530779] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.530782] system 00:0a: [io 0x1000-0x107f] has been reserved
[ 0.530785] system 00:0a: [io 0x1100-0x113f] has been reserved
[ 0.530788] system 00:0a: [io 0x1200-0x121f] has been reserved
[ 0.530791] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.530794] system 00:0a: [mem 0xfec00000-0xfec000ff] could not be reserved
[ 0.530797] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.530800] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.530803] system 00:0a: [mem 0xfed90000-0xfed99fff] has been reserved
[ 0.530809] system 00:0b: [mem 0x000cec00-0x000cffff] has been reserved
[ 0.530812] system 00:0b: [mem 0x000d1000-0x000d3fff] has been reserved
[ 0.530815] system 00:0b: [mem 0xfeda0000-0xfedbffff] has been reserved
[ 0.530818] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.537024] pci 0000:00:1c.1: BAR 15: assigned [mem 0x7f800000-0x7f9fffff 64bit pref]
[ 0.537028] pci 0000:00:1c.4: BAR 15: assigned [mem 0x7fa00000-0x7fbfffff 64bit pref]
[ 0.537032] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.537036] pci 0000:00:1c.0: PCI bridge to [bus 08-08]
[ 0.537038] pci 0000:00:1c.0: bridge window [io disabled]
[ 0.537045] pci 0000:00:1c.0: bridge window [mem disabled]
[ 0.537050] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 0.537058] pci 0000:00:1c.1: PCI bridge to [bus 10-10]
[ 0.537062] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.537069] pci 0000:00:1c.1: bridge window [mem 0xe8000000-0xe80fffff]
[ 0.537075] pci 0000:00:1c.1: bridge window [mem 0x7f800000-0x7f9fffff 64bit pref]
[ 0.537083] pci 0000:00:1c.4: PCI bridge to [bus 28-28]
[ 0.537087] pci 0000:00:1c.4: bridge window [io 0x4000-0x5fff]
[ 0.537094] pci 0000:00:1c.4: bridge window [mem 0xe4000000-0xe7ffffff]
[ 0.537099] pci 0000:00:1c.4: bridge window [mem 0x7fa00000-0x7fbfffff 64bit pref]
[ 0.537108] pci 0000:00:1c.5: PCI bridge to [bus 30-30]
[ 0.537111] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.537118] pci 0000:00:1c.5: bridge window [mem 0xe0000000-0xe00fffff]
[ 0.537123] pci 0000:00:1c.5: bridge window [mem pref disabled]
[ 0.537132] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[ 0.537134] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.537140] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.537145] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.537168] alloc irq_desc for 16 on node -1
[ 0.537170] alloc kstat_irqs on node -1
[ 0.537179] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.537186] pci 0000:00:1c.0: setting latency timer to 64
[ 0.537197] alloc irq_desc for 17 on node -1
[ 0.537199] alloc kstat_irqs on node -1
[ 0.537203] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.537209] pci 0000:00:1c.1: setting latency timer to 64
[ 0.537221] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.537226] pci 0000:00:1c.4: setting latency timer to 64
[ 0.537238] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.537243] pci 0000:00:1c.5: setting latency timer to 64
[ 0.537253] pci 0000:00:1e.0: setting latency timer to 64
[ 0.537258] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.537260] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.537263] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.537265] pci_bus 0000:00: resource 7 [mem 0x7f800000-0xfedfffff]
[ 0.537267] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff]
[ 0.537270] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000dffff]
[ 0.537273] pci_bus 0000:10: resource 0 [io 0x3000-0x3fff]
[ 0.537275] pci_bus 0000:10: resource 1 [mem 0xe8000000-0xe80fffff]
[ 0.537278] pci_bus 0000:10: resource 2 [mem 0x7f800000-0x7f9fffff 64bit pref]
[ 0.537280] pci_bus 0000:28: resource 0 [io 0x4000-0x5fff]
[ 0.537282] pci_bus 0000:28: resource 1 [mem 0xe4000000-0xe7ffffff]
[ 0.537285] pci_bus 0000:28: resource 2 [mem 0x7fa00000-0x7fbfffff 64bit pref]
[ 0.537288] pci_bus 0000:30: resource 0 [io 0x2000-0x2fff]
[ 0.537290] pci_bus 0000:30: resource 1 [mem 0xe0000000-0xe00fffff]
[ 0.537293] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.537295] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.537297] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.537300] pci_bus 0000:02: resource 7 [mem 0x7f800000-0xfedfffff]
[ 0.537302] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff]
[ 0.537305] pci_bus 0000:02: resource 9 [mem 0x000d4000-0x000dffff]
[ 0.537347] NET: Registered protocol family 2
[ 0.537491] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.538425] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.541251] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.542012] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.542015] TCP reno registered
[ 0.542025] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.542054] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.542205] NET: Registered protocol family 1
[ 0.542232] pci 0000:00:02.0: Boot video device
[ 0.542417] PCI: CLS 64 bytes, default 64
[ 0.542661] Scanning for low memory corruption every 60 seconds
[ 0.542860] audit: initializing netlink socket (disabled)
[ 0.542872] type=2000 audit(1288435773.530:1): initialized
[ 0.558568] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.560138] VFS: Disk quotas dquot_6.5.2
[ 0.560200] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.560813] fuse init (API version 7.14)
[ 0.560900] msgmni has been set to 3974
[ 0.561211] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.561214] io scheduler noop registered
[ 0.561216] io scheduler deadline registered
[ 0.561257] io scheduler cfq registered (default)
[ 0.561375] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.561427] alloc irq_desc for 40 on node -1
[ 0.561429] alloc kstat_irqs on node -1
[ 0.561446] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.561545] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.561593] alloc irq_desc for 41 on node -1
[ 0.561594] alloc kstat_irqs on node -1
[ 0.561604] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.561710] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.561758] alloc irq_desc for 42 on node -1
[ 0.561760] alloc kstat_irqs on node -1
[ 0.561769] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.561872] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.561919] alloc irq_desc for 43 on node -1
[ 0.561921] alloc kstat_irqs on node -1
[ 0.561930] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.562039] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.562119] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.562209] intel_idle: MWAIT substates: 0x22220
[ 0.562211] intel_idle: does not run on family 6 model 15
[ 0.565903] ACPI: AC Adapter [C244] (on-line)
[ 0.565999] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.566007] ACPI: Sleep Button [C2BE]
[ 0.566051] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.566120] ACPI: Lid Switch [C15B]
[ 0.566171] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.566176] ACPI: Power Button [PWRF]
[ 0.566417] ACPI: Fan [C3C6] (off)
[ 0.566620] ACPI: Fan [C3C7] (off)
[ 0.566814] ACPI: Fan [C3C8] (off)
[ 0.567007] ACPI: Fan [C3C9] (off)
[ 0.567205] ACPI: Fan [C3CA] (off)
[ 0.567467] ACPI: acpi_idle registered with cpuidle
[ 0.569839] Monitor-Mwait will be used to enter C-1 state
[ 0.570016] Monitor-Mwait will be used to enter C-2 state
[ 0.570039] Monitor-Mwait will be used to enter C-3 state
[ 0.570046] Marking TSC unstable due to TSC halts in idle
[ 0.570788] Switching to clocksource hpet
[ 0.588439] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.588451] ACPI: Thermal Zone [TZ3] (41 C)
[ 0.591289] Freeing initrd memory: 10748k freed
[ 0.599159] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.599174] ACPI: Thermal Zone [TZ4] (22 C)
[ 0.602764] thermal LNXTHERM:03: registered as thermal_zone2
[ 0.602773] ACPI: Thermal Zone [TZ5] (75 C)
[ 0.619823] thermal LNXTHERM:04: registered as thermal_zone3
[ 0.619832] ACPI: Thermal Zone [TZ0] (54 C)
[ 0.623903] thermal LNXTHERM:05: registered as thermal_zone4
[ 0.623911] ACPI: Thermal Zone [TZ1] (49 C)
[ 0.624046] ERST: Table is not found!
[ 0.624652] Linux agpgart interface v0.103
[ 0.624687] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.626209] brd: module loaded
[ 0.626752] loop: module loaded
[ 0.626952] ata_piix 0000:00:1f.1: version 2.13
[ 0.626969] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.627016] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.627130] scsi0 : ata_piix
[ 0.627217] scsi1 : ata_piix
[ 0.627747] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
[ 0.627750] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
[ 0.627949] ata2: port disabled. ignoring.
[ 0.628101] Fixed MDIO Bus: probed
[ 0.628135] PPP generic driver version 2.4.2
[ 0.628171] tun: Universal TUN/TAP device driver, 1.6
[ 0.628173] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.628262] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.628283] alloc irq_desc for 18 on node -1
[ 0.628285] alloc kstat_irqs on node -1
[ 0.628292] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.628308] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.628312] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.628347] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.628384] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.632282] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.632299] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe8600000
[ 0.652526] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.652639] hub 1-0:1.0: USB hub found
[ 0.652646] hub 1-0:1.0: 4 ports detected
[ 0.652722] alloc irq_desc for 20 on node -1
[ 0.652724] alloc kstat_irqs on node -1
[ 0.652729] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.652740] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.652744] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.652786] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.652819] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.656697] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.656714] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe8608000
[ 0.665345] ACPI: Battery Slot [C245] (battery present)
[ 0.672515] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.672625] hub 2-0:1.0: USB hub found
[ 0.672630] hub 2-0:1.0: 6 ports detected
[ 0.672704] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.672717] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.672774] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.672782] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.672785] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.672819] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.672859] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00006020
[ 0.672992] hub 3-0:1.0: USB hub found
[ 0.672996] hub 3-0:1.0: 2 ports detected
[ 0.673062] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.673069] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.673073] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.673109] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.673139] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006040
[ 0.673260] hub 4-0:1.0: USB hub found
[ 0.673265] hub 4-0:1.0: 2 ports detected
[ 0.673326] alloc irq_desc for 21 on node -1
[ 0.673328] alloc kstat_irqs on node -1
[ 0.673333] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.673340] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.673344] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.673381] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 0.673418] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006060
[ 0.673536] hub 5-0:1.0: USB hub found
[ 0.673540] hub 5-0:1.0: 2 ports detected
[ 0.673604] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.673611] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.673615] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.673655] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 0.673686] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006080
[ 0.673810] hub 6-0:1.0: USB hub found
[ 0.673814] hub 6-0:1.0: 2 ports detected
[ 0.673935] PNP: PS/2 Controller [PNP0303:C2A2,PNP0f13:C2A3] at 0x60,0x64 irq 1,12
[ 0.675517] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.676234] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.676240] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.676247] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.676250] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.676253] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.676327] mice: PS/2 mouse device common for all mice
[ 0.676457] rtc_cmos 00:05: RTC can wake from S4
[ 0.676500] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.676533] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.676628] device-mapper: uevent: version 1.0.3
[ 0.676718] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.676809] device-mapper: multipath: version 1.1.1 loaded
[ 0.676812] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.677075] cpuidle: using governor ladder
[ 0.677175] cpuidle: using governor menu
[ 0.677453] TCP cubic registered
[ 0.677583] NET: Registered protocol family 10
[ 0.677942] lo: Disabled Privacy Extensions
[ 0.678151] NET: Registered protocol family 17
[ 0.678908] PM: Resume from disk failed.
[ 0.678920] registered taskstats version 1
[ 0.679234] Magic number: 14:127:832
[ 0.679374] rtc_cmos 00:05: setting system clock to 2010-10-30 10:49:34 UTC (1288435774)
[ 0.679377] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.679379] EDD information not available.
[ 0.698032] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.792206] Freeing unused kernel memory: 908k freed
[ 0.792594] Write protecting the kernel read-only data: 10240k
[ 0.792841] Freeing unused kernel memory: 412k freed
[ 0.793176] Freeing unused kernel memory: 1644k freed
[ 0.810691] udev[85]: starting version 163
[ 0.859788] sky2: driver version 1.28
[ 0.859838] sky2 0000:30:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.859855] sky2 0000:30:00.0: setting latency timer to 64
[ 0.859893] sky2 0000:30:00.0: Yukon-2 FE+ chip revision 0
[ 0.859999] alloc irq_desc for 44 on node -1
[ 0.860002] alloc kstat_irqs on node -1
[ 0.860022] sky2 0000:30:00.0: irq 44 for MSI/MSI-X
[ 0.881543] sky2 0000:30:00.0: eth0: addr 18:a9:05:d5:70:8e
[ 0.968565] ahci 0000:00:1f.2: version 3.0
[ 0.968589] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.968641] alloc irq_desc for 45 on node -1
[ 0.968643] alloc kstat_irqs on node -1
[ 0.968657] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 0.968702] ahci: SSS flag set, parallel bus scan disabled
[ 0.968736] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 0.968741] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc
[ 0.968747] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.971802] scsi2 : ahci
[ 0.971998] scsi3 : ahci
[ 0.972104] scsi4 : ahci
[ 0.972201] ata3: SATA max UDMA/133 abar m2048@0xe8609000 port 0xe8609100 irq 45
[ 0.972206] ata4: SATA max UDMA/133 abar m2048@0xe8609000 port 0xe8609180 irq 45
[ 0.972210] ata5: SATA max UDMA/133 abar m2048@0xe8609000 port 0xe8609200 irq 45
[ 1.052559] usb 2-4: new high speed USB device using ehci_hcd and address 3
[ 1.208269] Initializing USB Mass Storage driver...
[ 1.208416] scsi5 : usb-storage 2-4:1.0
[ 1.208526] usbcore: registered new interface driver usb-storage
[ 1.208529] USB Mass Storage support registered.
[ 1.330063] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.330084] usb 2-5: new high speed USB device using ehci_hcd and address 4
[ 1.332387] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.332391] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.332598] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 1.332603] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.333622] ata3.00: ATA-8: Hitachi HTS723225L9A360, FCDOC60D, max UDMA/100
[ 1.333625] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.336157] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.336161] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.336365] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 1.336369] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.337404] ata3.00: configured for UDMA/100
[ 1.352383] ata3.00: configured for UDMA/100
[ 1.352387] ata3: EH complete
[ 1.352563] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS72322 FCDO PQ: 0 ANSI: 5
[ 1.352722] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.352774] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.352854] sd 2:0:0:0: [sda] Write Protect is off
[ 1.352858] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.352882] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.353021] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 1.430397] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.700085] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.800054] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 2.070074] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.074169] ata5.00: ATAPI: hp DVDRAM GT20L, DC05, max UDMA/100
[ 2.079049] ata5.00: configured for UDMA/100
[ 2.103197] scsi 4:0:0:0: CD-ROM hp DVDRAM GT20L DC05 PQ: 0 ANSI: 5
[ 2.114376] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.114380] Uniform CD-ROM driver Revision: 3.20
[ 2.114489] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.114556] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 2.121349] usbcore: registered new interface driver hiddev
[ 2.136804] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/input/input4
[ 2.136920] generic-usb 0003:046D:C001.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-1/input0
[ 2.136942] usbcore: registered new interface driver usbhid
[ 2.136945] usbhid: USB HID core driver
[ 2.331202] scsi 5:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
[ 2.331873] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 2.720017] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 3.043937] sd 5:0:0:0: [sdb] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB)
[ 3.044679] sd 5:0:0:0: [sdb] Write Protect is off
[ 3.044682] sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 3.044685] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 3.047044] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 3.047053] sdb: sdb1
[ 3.049920] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 3.049924] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 11.636906] udev[416]: starting version 163
[ 11.763631] Adding 2000056k swap on /dev/sda8. Priority:-1 extents:1 across:2000056k
[ 11.986149] agpgart-intel 0000:00:00.0: Intel 965GME/GLE Chipset
[ 11.986830] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 12.000876] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 12.032283] cfg80211: Calling CRDA to update world regulatory domain
[ 12.049739] cfg80211: World regulatory domain updated:
[ 12.049743] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.049746] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.049749] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.049752] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.049755] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.049758] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.074941] sky2 0000:30:00.0: eth0: enabling interface
[ 12.075223] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.091667] type=1400 audit(1288428585.909:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=689 comm="apparmor_parser"
[ 12.092401] type=1400 audit(1288428585.909:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=689 comm="apparmor_parser"
[ 12.092888] type=1400 audit(1288428585.909:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=689 comm="apparmor_parser"
[ 12.134522] input: HP WMI hotkeys as /devices/virtual/input/input5
[ 12.350352] lp: driver loaded but no devices found
[ 12.452588] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 12.452592] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 12.452726] iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 12.452764] iwlagn 0000:10:00.0: setting latency timer to 64
[ 12.452845] iwlagn 0000:10:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 12.477800] iwlagn 0000:10:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 12.477898] alloc irq_desc for 46 on node -1
[ 12.477901] alloc kstat_irqs on node -1
[ 12.477942] iwlagn 0000:10:00.0: irq 46 for MSI/MSI-X
[ 12.482064] [drm] Initialized drm 1.1.0 20060810
[ 12.499859] iwlagn 0000:10:00.0: loaded firmware version 8.24.2.12
[ 12.528773] Linux video capture interface: v2.00
[ 12.578095] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 12.599541] uvcvideo: Found UVC 1.00 device CNF8243 (04f2:b159)
[ 12.657160] input: CNF8243 as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input6
[ 12.657269] usbcore: registered new interface driver uvcvideo
[ 12.657272] USB Video Class driver (v0.1.0)
[ 12.688348] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.688354] i915 0000:00:02.0: setting latency timer to 64
[ 12.734880] alloc irq_desc for 47 on node -1
[ 12.734884] alloc kstat_irqs on node -1
[ 12.734900] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 12.734914] [drm] set up 7M of stolen space
[ 12.841541] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 12.841856] [drm] initialized overlay support
[ 13.136191] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
[ 13.150048] Skipping EDID probe due to cached edid
[ 13.180868] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 13.275205] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[ 13.542237] Console: switching to colour frame buffer device 170x48
[ 13.544906] fb0: inteldrmfb frame buffer device
[ 13.544907] drm: registered panic notifier
[ 13.544915] Slow work thread pool: Starting up
[ 13.545061] Slow work thread pool: Ready
[ 13.547509] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000004) is beyond end of object (20100428/exoparg2-418)
[ 13.547523] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C003.C09E._DOD] (Node ffff88007cf30d20), AE_AML_PACKAGE_LIMIT
[ 13.547556] ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20100428/video-1937)
[ 13.551296] acpi device:00: registered as cooling_device7
[ 13.552895] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 13.553023] ACPI: Video Device [C09E] (multi-head: yes rom: no post: no)
[ 13.553338] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 13.558298] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 13.558352] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 13.558363] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.558429] alloc irq_desc for 48 on node -1
[ 13.558431] alloc kstat_irqs on node -1
[ 13.558446] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 13.558484] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.562342] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 13.610064] Skipping EDID probe due to cached edid
[ 13.840302] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 13.840465] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 14.913054] type=1400 audit(1288428588.729:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1129 comm="apparmor_parser"
[ 14.919619] type=1400 audit(1288428588.729:6): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1132 comm="apparmor_parser"
[ 14.924519] type=1400 audit(1288428588.739:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1130 comm="apparmor_parser"
[ 14.925381] type=1400 audit(1288428588.739:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1130 comm="apparmor_parser"
[ 14.925787] type=1400 audit(1288428588.739:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1130 comm="apparmor_parser"
[ 14.934165] type=1400 audit(1288428588.749:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1132 comm="apparmor_parser"
[ 14.936871] type=1400 audit(1288428588.749:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1137 comm="apparmor_parser"
[ 14.964486] ppdev: user-space parallel port driver
[ 15.080168] Skipping EDID probe due to cached edid
[ 15.120859] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.197035] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 15.197040] vboxdrv: Successfully done.
[ 15.197042] vboxdrv: Found 2 processor cores.
[ 15.197523] VBoxDrv: dbg - g_abExecMemory=ffffffffa03bbd60
[ 15.197544] vboxdrv: fAsync=0 offMin=0x1c2 offMax=0x992
[ 15.198170] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 15.198173] vboxdrv: Successfully loaded version 3.2.8_OSE (interface 0x00140001).
[ 15.482623] Skipping EDID probe due to cached edid
[ 16.015855] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[ 16.046075] EXT4-fs (sda9): re-mounted. Opts: commit=0
[ 16.752572] Skipping EDID probe due to cached edid
[ 17.150055] Skipping EDID probe due to cached edid
[ 17.560063] Skipping EDID probe due to cached edid
[ 17.960052] Skipping EDID probe due to cached edid
[ 19.238189] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[ 19.241622] EXT4-fs (sda9): re-mounted. Opts: commit=0
[ 22.822593] Skipping EDID probe due to cached edid
[ 23.220082] Skipping EDID probe due to cached edid
[ 23.650090] Skipping EDID probe due to cached edid
[ 24.054529] Skipping EDID probe due to cached edid
[ 29.912573] Skipping EDID probe due to cached edid
[ 127.932692] CE: hpet increased min_delta_ns to 7500 nsec
[ 7309.732661] Skipping EDID probe due to cached edid
[22823.003787] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[22836.339485] wlan0: authenticate with 00:24:01:56:76:ac (try 1)
[22836.341799] wlan0: authenticated
[22836.341858] wlan0: associate with 00:24:01:56:76:ac (try 1)
[22836.344270] wlan0: RX AssocResp from 00:24:01:56:76:ac (capab=0x401 status=0 aid=1)
[22836.344279] wlan0: associated
[22836.346687] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[22846.522530] wlan0: no IPv6 routers present
[24452.158056] usb 2-2: new high speed USB device using ehci_hcd and address 5
[24452.314906] scsi6 : usb-storage 2-2:1.0
[24453.310964] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 2
[24453.311537] sd 6:0:0:0: Attached scsi generic sg3 type 0
[24453.315112] sd 6:0:0:0: [sdc] 31250432 512-byte logical blocks: (16.0 GB/14.9 GiB)
[24453.317578] sd 6:0:0:0: [sdc] Write Protect is off
[24453.317588] sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00
[24453.317595] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[24453.320715] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[24453.320731] sdc:
[24453.333053] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[24453.333059] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[27451.400073] No probe response from AP 00:24:01:56:76:ac after 500ms, disconnecting.
[27451.422768] cfg80211: All devices are disconnected, going to restore regulatory settings
[27451.422781] cfg80211: Restoring regulatory settings
[27451.422790] cfg80211: Calling CRDA to update world regulatory domain
[27451.594591] cfg80211: World regulatory domain updated:
[27451.594600] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[27451.594609] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[27451.594617] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[27451.594624] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[27451.594632] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[27451.594639] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[27454.678638] wlan0: authenticate with 00:24:01:56:76:ac (try 1)
[27454.680603] wlan0: authenticated
[27454.680664] wlan0: associate with 00:24:01:56:76:ac (try 1)
[27454.683129] wlan0: RX AssocResp from 00:24:01:56:76:ac (capab=0x401 status=0 aid=1)
[27454.683139] wlan0: associated
[33020.932729] CE: hpet increased min_delta_ns to 11250 nsec
[35378.542621] hub 5-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[35378.542635] usb 5-1: USB disconnect, address 2
[35378.870094] usb 5-1: new low speed USB device using uhci_hcd and address 3
[35379.066005] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/input/input11
[35379.066140] generic-usb 0003:046D:C001.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-1/input0
[40425.460143] usb 2-1: new high speed USB device using ehci_hcd and address 6
[40425.616038] scsi7 : usb-storage 2-1:1.0
[40426.611365] scsi 7:0:0:0: Direct-Access ST350041 8AS PQ: 0 ANSI: 2 CCS
[40426.612772] sd 7:0:0:0: Attached scsi generic sg4 type 0
[40426.616847] sd 7:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[40426.617672] sd 7:0:0:0: [sdd] Write Protect is off
[40426.617680] sd 7:0:0:0: [sdd] Mode Sense: 00 38 00 00
[40426.617687] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[40426.619569] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[40426.619585] sdd: sdd1
[40426.636791] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[40426.636803] sd 7:0:0:0: [sdd] Attached SCSI disk
[40427.227113] EXT4-fs (sdd1): warning: maximal mount count reached, running e2fsck is recommended
[40427.253725] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[49411.430052] No probe response from AP 00:24:01:56:76:ac after 500ms, disconnecting.
[49411.452726] cfg80211: All devices are disconnected, going to restore regulatory settings
[49411.452735] cfg80211: Restoring regulatory settings
[49411.452741] cfg80211: Calling CRDA to update world regulatory domain
[49411.651381] cfg80211: World regulatory domain updated:
[49411.651386] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[49411.651389] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49411.651393] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[49411.651396] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[49411.651398] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49411.651401] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49414.756365] wlan0: authenticate with 00:24:01:56:76:ac (try 1)
[49414.758347] wlan0: authenticated
[49414.758388] wlan0: associate with 00:24:01:56:76:ac (try 1)
[49414.760750] wlan0: RX AssocResp from 00:24:01:56:76:ac (capab=0x401 status=0 aid=1)
[49414.760754] wlan0: associated
[56895.753676] Skipping EDID probe due to cached edid
[59371.561151] No probe response from AP 00:24:01:56:76:ac after 500ms, disconnecting.
[59371.600419] cfg80211: All devices are disconnected, going to restore regulatory settings
[59371.600432] cfg80211: Restoring regulatory settings
[59371.600440] cfg80211: Calling CRDA to update world regulatory domain
[59371.608892] cfg80211: World regulatory domain updated:
[59371.608900] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[59371.608909] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[59371.608916] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[59371.608924] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[59371.608931] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[59371.608938] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[59374.857572] wlan0: authenticate with 00:24:01:56:76:ac (try 1)
[59374.859685] wlan0: authenticated
[59374.859743] wlan0: associate with 00:24:01:56:76:ac (try 1)
[59374.862445] wlan0: RX AssocResp from 00:24:01:56:76:ac (capab=0x401 status=0 aid=1)
[59374.862455] wlan0: associated
[81338.274176] show_signal_msg: 9 callbacks suppressed
[81338.274183] npviewer.bin[6136]: segfault at 418 ip 00000000f606add6 sp 00000000ff944648 error 6 in libflashplayer.so[f5e1c000+b2c000]
[84165.503452] Skipping EDID probe due to cached edid
[84236.127954] usb 2-2: USB disconnect, address 5
[85808.300087] usb 2-2: new high speed USB device using ehci_hcd and address 7
[85808.452607] scsi8 : usb-storage 2-2:1.0
[85809.453795] scsi 8:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 2
[85809.454445] sd 8:0:0:0: Attached scsi generic sg3 type 0
[85809.466278] sd 8:0:0:0: [sdc] 31250432 512-byte logical blocks: (16.0 GB/14.9 GiB)
[85809.467639] sd 8:0:0:0: [sdc] Write Protect is off
[85809.467642] sd 8:0:0:0: [sdc] Mode Sense: 03 00 00 00
[85809.467645] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[85809.471140] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[85809.471147] sdc:
[85809.478273] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[85809.478280] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[86192.461739] usb 2-2: USB disconnect, address 7
[86203.493581] usb 2-1: USB disconnect, address 6
[86217.040102] usb 2-2: new high speed USB device using ehci_hcd and address 8
[86217.435136] em28xx: New device USB 2870 Device @ 480 Mbps (eb1a:2870, interface 0, class 0)
[86217.435832] em28xx #0: chip ID is em2870
[86217.519759] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 70 28 c0 12 81 00 6a 22 00 00
[86217.519779] em28xx #0: i2c eeprom 10: 00 00 04 57 02 0d 00 00 00 00 00 00 00 00 00 00
[86217.519796] em28xx #0: i2c eeprom 20: 44 00 00 00 f0 10 02 00 00 00 00 00 5b 00 00 00
[86217.519812] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 10 1d 8c 49
[86217.519829] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[86217.519848] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[86217.519857] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
[86217.519866] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 37 00 30 00 20 00 44 00
[86217.519874] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
[86217.519883] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[86217.519892] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[86217.519901] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[86217.519910] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[86217.519918] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[86217.519927] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[86217.519936] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[86217.519945] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x5e2c36c0
[86217.519947] em28xx #0: EEPROM info:
[86217.519949] em28xx #0: No audio on board.
[86217.519950] em28xx #0: 500mA max power
[86217.519952] em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000
[86217.521619] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
[86217.552988] em28xx #0: found i2c device @ 0xa0 [eeprom]
[86217.559370] em28xx #0: found i2c device @ 0xc0 [tuner (analog)]
[86217.571370] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
[86217.571378] em28xx #0: You may try to use card=<n> insmod option to workaround that.
[86217.571382] em28xx #0: Please send an email with this log to:
[86217.571385] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org>
[86217.571388] em28xx #0: Board eeprom hash is 0x5e2c36c0
[86217.571392] em28xx #0: Board i2c devicelist hash is 0x4b800080
[86217.571395] em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
[86217.571401] em28xx #0: card=0 -> Unknown EM2800 video grabber
[86217.571405] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber
[86217.571409] em28xx #0: card=2 -> Terratec Cinergy 250 USB
[86217.571413] em28xx #0: card=3 -> Pinnacle PCTV USB 2
[86217.571416] em28xx #0: card=4 -> Hauppauge WinTV USB 2
[86217.571420] em28xx #0: card=5 -> MSI VOX USB 2.0
[86217.571424] em28xx #0: card=6 -> Terratec Cinergy 200 USB
[86217.571428] em28xx #0: card=7 -> Leadtek Winfast USB II
[86217.571431] em28xx #0: card=8 -> Kworld USB2800
[86217.571435] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2
[86217.571440] em28xx #0: card=10 -> Hauppauge WinTV HVR 900
[86217.571444] em28xx #0: card=11 -> Terratec Hybrid XS
[86217.571448] em28xx #0: card=12 -> Kworld PVR TV 2800 RF
[86217.571452] em28xx #0: card=13 -> Terratec Prodigy XS
[86217.571455] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
[86217.571460] em28xx #0: card=15 -> V-Gear PocketTV
[86217.571463] em28xx #0: card=16 -> Hauppauge WinTV HVR 950
[86217.571467] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick
[86217.571471] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2)
[86217.571475] em28xx #0: card=19 -> EM2860/SAA711X Reference Design
[86217.571479] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600
[86217.571483] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
[86217.571487] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber
[86217.571491] em28xx #0: card=23 -> Huaqi DLCW-130
[86217.571495] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner
[86217.571498] em28xx #0: card=25 -> Gadmei UTV310
[86217.571502] em28xx #0: card=26 -> Hercules Smart TV USB 2.0
[86217.571506] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
[86217.571510] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe
[86217.571514] em28xx #0: card=29 -> EM2860/TVP5150 Reference Design
[86217.571518] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0
[86217.571522] em28xx #0: card=31 -> Usbgear VD204v9
[86217.571525] em28xx #0: card=32 -> Supercomp USB 2.0 TV
[86217.571529] em28xx #0: card=33 -> (null)
[86217.571532] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS
[86217.571536] em28xx #0: card=35 -> Typhoon DVD Maker
[86217.571540] em28xx #0: card=36 -> NetGMBH Cam
[86217.571543] em28xx #0: card=37 -> Gadmei UTV330
[86217.571547] em28xx #0: card=38 -> Yakumo MovieMixer
[86217.571551] em28xx #0: card=39 -> KWorld PVRTV 300U
[86217.571554] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U
[86217.571558] em28xx #0: card=41 -> Kworld 350 U DVB-T
[86217.571562] em28xx #0: card=42 -> Kworld 355 U DVB-T
[86217.571565] em28xx #0: card=43 -> Terratec Cinergy T XS
[86217.571569] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060)
[86217.571573] em28xx #0: card=45 -> Pinnacle PCTV DVB-T
[86217.571577] em28xx #0: card=46 -> Compro, VideoMate U3
[86217.571581] em28xx #0: card=47 -> KWorld DVB-T 305U
[86217.571584] em28xx #0: card=48 -> KWorld DVB-T 310U
[86217.571588] em28xx #0: card=49 -> MSI DigiVox A/D
[86217.571592] em28xx #0: card=50 -> MSI DigiVox A/D II
[86217.571595] em28xx #0: card=51 -> Terratec Hybrid XS Secam
[86217.571599] em28xx #0: card=52 -> DNT DA2 Hybrid
[86217.571603] em28xx #0: card=53 -> Pinnacle Hybrid Pro
[86217.571606] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR
[86217.571610] em28xx #0: card=55 -> Terratec Hybrid XS (em2882)
[86217.571614] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2)
[86217.571618] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330
[86217.571622] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo
[86217.571625] em28xx #0: card=59 -> (null)
[86217.571629] em28xx #0: card=60 -> Hauppauge WinTV HVR 850
[86217.571633] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0
[86217.571636] em28xx #0: card=62 -> Gadmei TVR200
[86217.571640] em28xx #0: card=63 -> Kaiomy TVnPC U2
[86217.571644] em28xx #0: card=64 -> Easy Cap Capture DC-60
[86217.571647] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ
[86217.571651] em28xx #0: card=66 -> Empire dual TV
[86217.571655] em28xx #0: card=67 -> Terratec Grabby
[86217.571658] em28xx #0: card=68 -> Terratec AV350
[86217.571662] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box
[86217.571666] em28xx #0: card=70 -> Evga inDtube
[86217.571669] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix
[86217.571673] em28xx #0: card=72 -> Gadmei UTV330+
[86217.571677] em28xx #0: card=73 -> Reddo DVB-C USB TV Box
[86217.571681] em28xx #0: card=74 -> Actionmaster/LinXcel/Digitus VC211A
[86217.571684] em28xx #0: card=75 -> Dikom DK300
[86217.571691] em28xx #0: v4l2 driver version 0.1.2
[86217.575596] IR NEC protocol handler initialized
[86217.577257] em28xx #0: V4L2 video device registered as video1
[86217.578010] usbcore: registered new interface driver em28xx
[86217.578013] em28xx driver loaded
[86217.616364] IR RC5(x) protocol handler initialized
[86217.630910] IR RC6 protocol handler initialized
[86217.650968] IR JVC protocol handler initialized
[86217.670455] IR Sony protocol handler initialized
[86217.702104] lirc_dev: IR Remote Control driver registered, major 250
[86217.709599] IR LIRC bridge handler initialized
[86338.409334] Em28xx: Initialized (Em28xx dvb Extension) extension
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: pinnaclePCTVusb2
[not found] <1293021683.3229.6.camel@ubuntu>
@ 2010-12-22 17:09 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 2+ messages in thread
From: Mauro Carvalho Chehab @ 2010-12-22 17:09 UTC (permalink / raw)
To: daniele; +Cc: cavedon, Linux Media Mailing List, saschasommer
Danielle,
Em 22-12-2010 10:41, daniele escreveu:
> lsusb
> Bus 002 Device 002: ID eb1a:2870 eMPIA Technology, Inc. Pinnacle PCTV
> Stick
>
> Linux ubuntu 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 02:41:37 UTC
> 2010 x86_64 GNU/Linux
>
> I'm sorry to disturb, but it's an year I can resolve this question...
> My pinnacle pctv usb2 dvb-t was working very well with linux once, now i
> can't make it scans channels... it finds only five type of
> channels(RETECAPRI and similar cause I'm in italy).
> i'm using these modules
> http://jiemeb.free.fr/pinnacle/
>
> ANY HELP appreciated.
Please post such questions to linux-media@vger.kernel.org.
>
> dmesg
> 9.974305] em28xx v4l2 driver version 0.0.1 loaded
Hmm... this is not the latest driver. Probably, you're using an old, discontinued
fork of the driver. Please test your stick with the latest kernel.
> [ 9.974544] em28xx: new video device (eb1a:2870): interface 0, class
> 255
> [ 9.974547] em28xx: device is attached to a USB 2.0 bus
> [ 9.974550] em28xx #0: Alternate settings: 8
> [ 9.974553] em28xx #0: Alternate setting 0, max size= 0
> [ 9.974555] em28xx #0: Alternate setting 1, max size= 0
> [ 9.974557] em28xx #0: Alternate setting 2, max size= 1448
> [ 9.974560] em28xx #0: Alternate setting 3, max size= 2048
> [ 9.974562] em28xx #0: Alternate setting 4, max size= 2304
> [ 9.974565] em28xx #0: Alternate setting 5, max size= 2580
> [ 9.974568] em28xx #0: Alternate setting 6, max size= 2892
> [ 9.974570] em28xx #0: Alternate setting 7, max size= 3072
> [ 10.392961] input: em2880/em2870 remote control
> as /devices/virtual/input/input9
> [ 10.393061] em28xx-input.c: remote control handler attached
> [ 10.393065] em28xx #0: Found Pinnacle PCTV DVB-T
> [ 10.393116] usbcore: registered new interface driver em28xx
> [ 10.489638] em2880-dvb.c: DVB Init
> [ 11.574050] DVB: registering new adapter (em2880 DVB-T)
>
Cheers,
Mauro
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-12-22 17:10 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-10-31 8:56 PinnaclePCTVusb2 danlin
[not found] <1293021683.3229.6.camel@ubuntu>
2010-12-22 17:09 ` pinnaclePCTVusb2 Mauro Carvalho Chehab
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.